1.6 x 0.8 x 0.6mm smd osxx1608c1a ver.a.10 outline ......1.6 x 0.8 x 0.6mm smd osxx1608c1a ver.a.10...

http://www.optosupply.com VER A.8

-

11..66 xx 00..88 xx 00..66mmmm SSMMDD

OSXX1608C1A

Ver.A.10

■Features ■Outline Dimension

● Single chip Recommended Solder Pad

Top

Side

Bottom

Anode CathodeNotes: 1. All dimensions are in millimeters ;2. Tolerance is ± 0.10 mm unless otherwise noted.

● Super high brightness of surface mount

LED

● Sorting for Iv and Vf @ 5mA of If

● Compact package outline

(LxWxT) of 1.6mm x 0.8mm x 0.6mm

● Compatible to IR reflow soldering.

■Applications

● Backlighting (switches, keys, etc.) ● Marker lights (e.g. steps, exit ways, etc.) ■Absolute Maximum Rating (Ta=25℃)(Ta=25℃)(Ta=25℃)(Ta=25℃) ■Directivity

Item Symbol Value

Unit 00

WT/MW/BL/TG YG/YL/OR/HR

DC Forward Current IF 30 30 mA

Pulse Forward Current* IFP 100 100 mA

Reverse Voltage VR 5 5 V

Power Dissipation PD 100 70 mW

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40~ +85 ℃

Lead Soldering Temperature Tsol 260℃/5sec - *Pulse width Max 0.1ms, Duty ratio max 1/10 ■Electrical -Optical Characteristics (Ta=25(Ta=25(Ta=25(Ta=25℃℃℃℃))))

Part Number Color

VF (V) IR(µA) Iv(mcd) λD(nm) 2θ1/2(deg)

Min. Typ. Max. Max. Min. Typ. Max. Min. Typ. Max. Typ.

IF=5mA VR=5V IF=5mA

OSWT1608C1A White WT ■ 2.6 2.9 3.2 10 37 74 110 X=0.27,Y=0.28 120

OSMW1608C1A Warm white MW ■ 2.6 2.9 3.2 10 37 74 110 X=0.45,Y=0.41 120

OSK41608C1A Pink K4 2.6 2.9 3.2 10 50 75 100 X=0.30, Y=0.16 120

OSVX1608C1A Violet VX 2.6 2.9 3.2 10 70 100 130 X=0.20, Y=0.09 120

OSB61608C1A Ice Blue B6 ■ 2.6 2.9 3.2 10 80 140 200 X=0.18, Y=0.26 120

OSBL1608C1A Blue BL ■ 2.6 2.9 3.2 10 9 23 37 455 465 475 120

OSTG1608C1A True green TG ■ 2.6 2.9 3.2 10 90 128 165 520 525 530 120

OSYG1608C1A Yellow green YG ■ 1.7 1.9 2.2 10 6 11 16 565 570 575 120

OSYL1608C1A Yellow YL ■ 1.7 1.9 2.2 10 27 40 71 586 591 595 120

OSOR1608C1A Orange OR ■ 1.7 1.9 2.2 10 18 35 60 600 605 610 120

OSHR1608C1A Red HR ■ 1.7 1.9 2.2 10 18 35 60 620 625 630 120

Note: * Vf tolerance: ±0.05V * Dominant wavelength tolerance: ±1nm * Luminous intensity is NIST reading. Luminous intensity tolerance:±10%

LED & Application Technologies


11..66 xx 00..88 xx 00..66mmmm SSMMDD

OSXX1608C1A

Ver.A.10 ■ Optical and Electrical Characteristics

TYPICAL ELECTRICAL/OPTICAL CHARACTERISTIC CURVES


Forward Voltage Vf (V)30Forward Current

If (mA)0.501020

4050603.53.02.52.01.0 4.0

IF-VF1.5OR/HR

BL

YL

WT

YG

TG 0 Relative Luminous Intensity

(Normalized @5mA)

Forward current IF(mA) Relative luminous intensity - If

200 10 5030 60401234567

BL

WT

YGYL

OR/HR TG

If_Ta

1005040302010Forward Curren

t If (mA)806020-20 40-30Ambient Temperature Ta (°C)0 0Wavelength Characteristics

40 4504002008060100 Ta=25°C

600550500 650 700Relative Luminous Intensity

Wavelength (nm)

BL HRYG YLOR

TG

WT


11..66 xx 00..88 xx 00..66mmmm WWhhiittee SSMMDD

OSWT1608C1A

Ver.A.10

* One delivery would be included 125 different ranks of the luminous intensity , wavelength and Vf depend on customer request.

* The quantity ratio of the different intensity and wavelength ranks in one delivery is decided by Optosupply.

* The reel of LED shows the number of definition of LEDs on reel label



11..66 xx 00..88 xx 00..66mmmm WWaarrmm WWhhiittee SSMMDD

OSMW1608C1A

Ver.A.10

Chromaticity coordinate groups are measured with an accuracy ofChromaticity coordinate groups are measured with an accuracy ofChromaticity coordinate groups are measured with an accuracy ofChromaticity coordinate groups are measured with an accuracy of±±±±0.00.00.00.01111 Rank A1 Rank A4

X 0.428 0.428 0.439 0.439 X 0.461 0.461 0.473 0.473

Y 0.404 0.394 0.399 0.409 Y 0.421 0.411 0.416 0.426

Rank A2 Rank A5

X 0.439 0.439 0.45 0.45 X 0.473 0.473 0.484 0.484

Y 0.409 0.399 0.405 0.415 Y 0.426 0.416 0.422 0.432

Rank A3

X 0.45 0.45 0.461 0.461

Y 0.415 0.405 0.411 0.411






11..66 xx 00..88 xx 00..66mmmm PPiinnkk SSMMDD

OSKX1608C1A

Ver.A.10

G roup D efintion of CIE valueG roup D efintion of CIE valueG roup D efintion of CIE valueG roup D efintion of CIE valuelf co lo r b inn ing is requ ired ,on ly one co lo r g roup is allow ed fo r each ch ip w ith in a reel

Chromaticity coordinatChromaticity coordinatChromaticity coordinatChromaticity coordinate groups are measured with an accuracy ofe groups are measured with an accuracy ofe groups are measured with an accuracy ofe groups are measured with an accuracy of±±±±0.010.010.010.01 Rank K1 Rank K4

X 0.2572 0.2803 0.2941 0.271 X 0.2986 0.3217 0.3355 0.3124

Y 0.1445 0.1169 0.1285 0.1561 Y 0.1792 0.1516 0.1632 0.1908

Rank K2 Rank K5

X 0.271 0.2941 0.3079 0.2848 X 0.3124 0.3355 0.3493 0.3261

Y 0.1561 0.1561 0.1401 0.1676 Y 0.1908 0.1632 0.1748 0.2024

Rank K3 Rank K6

X 0.2848 0.3079 0.3217 0.2986 X 0.3261 0.3493 0.3631 0.3399

Y 0.1676 0.1401 0.1516 0.1792 Y 0.2024 0.1748 0.1863 0.2139





GroGroGroGroup Definition of forward voltageup Definition of forward voltageup Definition of forward voltageup Definition of forward voltage Rank Vf @ 5mA (V) 1 2.7~2.8 2 2.8~2.9 3 2.9~3.0 4 3.0~3.1 5 3.1~3.2 Group Definition of brightnessGroup Definition of brightnessGroup Definition of brightnessGroup Definition of brightness Rank Iv @ 5mA (mcd) A 50~62 B 62~75 C 75~87 D 87~100


11..66 xx 00..88 xx 00..66mmmm VViioolleett SSMMDD

OSVX1608C1A

Ver.A.10

G roup D efin tion o f C IE valueG roup D efin tion o f C IE valueG roup D efin tion o f C IE valueG roup D efin tion o f C IE valuel f co lo r b in n in g is req u ired ,o n ly o n e co lo r g ro u p is a llo w ed fo r e ach ch ip w ith in a re e l

Chromaticity coordinate groups are measured with an accuracy ofChromaticity coordinate groups are measured with an accuracy ofChromaticity coordinate groups are measured with an accuracy ofChromaticity coordinate groups are measured with an accuracy of±±±±0.010.010.010.01 Rank V1 Rank V4

X 0.1904 0.1958 0.199 0.1935 X 0.2067 0.2122 0.2153 0.2099

Y 0.0866 0.091 0.0871 0.0827 Y 0.0998 0.1042 0.1003 0.0959

Rank V2 Rank V5

X 0.1958 0.2013 0.2044 0.199 X 0.2122 0.2177 0.2208 0.2154

Y 0.091 0.0954 0.0915 0.0871 Y 0.1043 0.1087 0.1048 0.1004

Rank V3

X 0.2013 0.2067 0.2099 0.2044

Y 0.0954 0.0998 0.0959 0.0915





Group Definition of forward voltageGroup Definition of forward voltageGroup Definition of forward voltageGroup Definition of forward voltage Rank Vf @ 5mA (V) 1 2.7~2.8 2 2.8~2.9 3 2.9~3.0 4 3.0~3.1 5 3.1~3.2 Group Definition of brightnessGroup Definition of brightnessGroup Definition of brightnessGroup Definition of brightness Rank Iv @ 5mA (mcd) A 70~85 B 85~100 C 100~115 D 115~130


G ro u p D e f in t io n o f C IE v a lu eG ro u p D e f in t io n o f C IE v a lu eG ro u p D e f in t io n o f C IE v a lu eG ro u p D e f in t io n o f C IE v a lu el f c o lo r b i n n i n g i s r e q u i r e d ,o n ly o n e c o l o r g r o u p i s a l l o w e d f o r e a c h c h ip w i th in a r e e l

ChromaticChromaticChromaticChromaticity coordinate groups are measured with an accuracy ofity coordinate groups are measured with an accuracy ofity coordinate groups are measured with an accuracy ofity coordinate groups are measured with an accuracy of±±±±0.010.010.010.01 Rank b1 Rank b4

X 0.1772 0.1785 0.1835 0.1822 X 0.181 0.1822 0.1872 0.186

Y 0.2351 0.2401 0.2401 0.2351 Y 0.2501 0.2551 0.2551 0.2501

Rank b2 Rank b5

X 0.1785 0.1797 0.1847 0.1835 X 0.1822 0.1835 0.1855 0.1872

Y 0.2401 0.2451 0.2451 0.2401 Y 0.2551 0.2601 0.2601 0.2551

Rank B3 Rank B6

X 0.1797 0.181 0.186 0.1847 X 0.1835 0.1847 0.1897 0.1885

Y 0.2451 0.2501 0.2501 0.2451 Y 0.2601 0.2651 0.2651 0.2601





11..66 xx 00..88 xx 00..88mmmm IIccee BBlluuee SSMMDD

OSB61608C1A

Ver.A.10 Group Definition of forward voltageGroup Definition of forward voltageGroup Definition of forward voltageGroup Definition of forward voltage Rank Vf @ 5mA (V) 1 2.7~2.8 2 2.8~2.9 3 2.9~3.0 4 3.0~3.1 5 3.1~3.2 Group Definition of brightnessGroup Definition of brightnessGroup Definition of brightnessGroup Definition of brightness Rank Iv @ 5mA (mcd) A 80~110 B 110~140 C 140~170 D 170~200


11..66 xx 00..88 xx 00..66mmmm PPuurree GGrreeeenn SSMMDD

OSTG1608C1A

Ver.A.10 Group Definition of forward voltageGroup Definition of forward voltageGroup Definition of forward voltageGroup Definition of forward voltage

Rank Vf @ 5mA (V) 1 2.6~2.7 2 2.7~2.8 3 2.8~2.9 4 2.9~3.0 5 3.0~3.1 6 3.1~3.2 Group Definition of wavelengthGroup Definition of wavelengthGroup Definition of wavelengthGroup Definition of wavelength Rank λd @ 5mA (nm) W 520-525 X 525-530 GroGroGroGroup Definition of briup Definition of briup Definition of briup Definition of brigggghtnesshtnesshtnesshtness Rank Iv @ 5mA (mcd)

A 90~105 B 105~130 C 130~145 D 145~165





11..66 xx 00..88 xx 00..66mmmm YYeellllooww GGrreeeenn SSMMDD

OSYG1608C1A

Ver.A.10





11..66 xx 00..88 xx 00..66mmmm YYeellllooww SSMMDD

OSYL1608C1A

Ver.A.10 Group Definition of forward voltageGroup Definition of forward voltageGroup Definition of forward voltageGroup Definition of forward voltage Rank Vf @ 5mA (V)

1 1.7~1.8 2 1.8~1.9 3 1.9~2.0 4 2.0~2.1 5 2.1~2.2 Group definition of wavelenghtGroup definition of wavelenghtGroup definition of wavelenghtGroup definition of wavelenght Rank λd @ 5mA (nm)

W 586~589 X 589~592 Y 592~595 Group definition of brightnessGroup definition of brightnessGroup definition of brightnessGroup definition of brightness Rank Iv @ 5mA (mcd) A 27~34.5 B 34.5~44 C 44~56 D 56~71





11..66 xx 00..88 xx 00..66mmmm OOrraannggee SSMMDD

OSOR1608C1A

Ver.A.10





11..66 xx 00..88 xx 00..66mmmm RReedd SSMMDD

OSHR1608C1A

Ver.A.10





11..66 xx 00..88 xx 00..66mmmm SSMMDD

OSXX1608C1A

Ver.A.10 ■ Recommended Soldering Temperature – Time Profile (Reflow Soldering)

Surface Mounting Condition

In automatic mounting of the SMD LEDs on printed circuit boards, any bending, expanding and pulling

forces or shock against the SMD LEDs should be kept min. to prevent them from electrical failures and

mechanical damages of the devices.

Soldering Reflow

-Soldering of the SMD LEDs should conform to the soldering condition in the individual specifications.

-SMD LEDs are designed for Reflow Soldering.

-In the reflow soldering, too high temperature and too large temperature gradient such as rapid

heating/cooling may cause electrical & optical failures and damages of the devices.

-We cannot guarantee the LEDs after they have been assembled using the solder dipping method.



11..66 xx 00..88 xx 00..66mmmm SSMMDD

OSXX1608C1A

Ver.A.10

3) Manual Soldering conditions.

- Lead Solder

Max. 300 for Max. 3sec, and only one time. ℃ - Lead-free Solder

Max. 350 for Max. 3sec, and only one time. ℃ - There is possibility that the brightness of LEDs is decreased, which is influenced by heat or ambient

atmosphere during reflow. It is recommended to use the nitrogen reflow method.

- After LEDs have been soldered, repair should not be done. As repair is unavoidable, a double-head

soldering iron should be used. It should be confirmed beforehand whether the characteristics of the

LEDs will be damaged by repairing or not.

- Reflow soldering should not be done more than two times.



11..66 xx 00..88 xx 00..66mmmm SSMMDD

OSXX1608C1A

Ver.A.10 ■ Material

True green/

White/ Blue/ Yellow green/ Yellow/ Orange/ Red：


InGaN based


11..66 xx 00..88 xx 00..66mmmm SSMMDD

OSXX1608C1A

Ver.A.10 ■ Taping and Orientation.

Quantity: 4,000 units/reel

Diameter: 178 mm

General Tolerance : ± 0.1

■ Cautions:

1. After open the package, the LED should be kept at 30°C, 30%RH or less. The LED should

be soldered within 24 hours (1 day) after opening the package.

2. Heat generation must be taken into design consideration when using the LED.

3. Power must be applied resistors for protection, over current would be caused the optic

damage to the devices and wavelength shift.

4. Manual tip solder may cause the damage to Chip devices, so advised that heat of iron

should be lower than 15W with temperature control under 5 seconds at 230-260 deg. C.

( The device would be got damage in re working process, recommended under 5 seconds

at 230-260 deg. C)

5. All equipment and machinery must be properly grounded. It is recommended to use a

wristband or anti-electrostatic glove when handing the LED.

6. Use IPA as a solvent for cleaning the LED. The other solvent may dissolve the LED

package and the epoxy, Ultrasonic cleaning should not be done.

7. Damaged LED will show unusual characteristics such as leak current remarkably increase,

turn-on voltage becomes lower and the LED get unlight at low current.



11..66 xx 00..88 xx 00..66mmmm SSMMDD

OSXX1608C1A

Ver.A.10 ■ Reliability Test :

Conclusions:

The reliability tests were designed to evaluate both package integrity as well as workability of product

performance over time.

All samples have done well by completed test requirement and passed all the qualification criteria with

zero failure. From design standpoint, the package is robust enough to meet its datasheet conditions.

Based on the good result shows on the above test, this product is qualified and released for market.



11..66 xx 00..88 xx 00..66mmmm SSMMDD

OSXX1608C1A

Ver.A.10

OPERATION LIFE TEST LUMINANCE RATE CURVE

Operating Life Test(If=5mA,Ta=25degC)

0%20%40%60%80%100%120%

0 168 500 1000Time(Hours)

IV%

WT BL TG YG

YL OR HR

*Burn-in condition: 5mA

*Projection of Statistical Average Light Output Degradation Performance for LED Technology

Extrapolated from OptoSupply QA Dept. Test Data.

*According to OptoSupply outgoing Packaged Products Specification

*MTBF:50,000hrs, 90% Confidence (A Failure is Any LED Which is Open, shorted or fails to

Emit Light)

*The Projected Data is Base on The Feature of LED Itself Under Normal Operation Conditions.

*Any Improper Circuit Design or External Factors Might Cause a Different Result.


1.6 x 0.8 x 0.6mm smd osxx1608c1a ver.a.10 outline ......1.6 x 0.8 x 0.6mm smd osxx1608c1a ver.a.10...

Documents