1704566 harmony hot n cold tt s en 090914download2.creminternational.com/coffee...
TRANSCRIPT
Your retail dealer
...............................................................................
...............................................................................
Service manual”...WITH A PASSION FOR COFFEE”
Rev. 090914
S / EN
Harmony hot n cold TTCOFFEE QUEEN
...............................................................................
...............................................................................
1. Table (list) of contents.
1. Table of contents page. 22. General 33. Overview of components front 43. Overview of components mixing system 54. SERVICE: Installation and start 6- 7
Place the brewerConnections: Electricity/WaterStarting up machineFill canisters with ingredientsFill bean container with coffee beans
5. OperationBrewing of coffee in cup 8Brewing of jug 9
6. Cleaning programAutomatic cleaning of mixing bowls 10Automatic cleaning of In/Outlet valves 11Rotate brew mechanism without water or ingredients 12Automatic cleaning of brew mechanism, mixing bowl 13-14
7. Weekly cleaningdismantle mixer system 15wash these parts 15assemble mixer system 16
8. Cleaning and maintenanceOutward cleaning and when needed 17Cleaning, grinder 17Cleaning and dismantling of coffee filter 18
Maintenance, grinder 19Maintenance, condenser 20
9. Cup counter and Easy access 2110. Safety functions 2211. Failure messages 2212. Storage / Transport. 2213. Dimension sketch 2314. Circuit diagram. 2415. Installation of coin mechanism 2516. Cooling unit, cooled water 2617. Exchange of water cleaning filter. 2718. Spare parts list 28-3219. Exploded View 33-40
2.
2. General. Harmony hot n cold TT
We congratulate to your choice of a Coffee Queen Harmony Freshbrew machine.
Please read this manual before you take the machine into operation for the first time.The manual contains important instructions for a safe and proper use of the machine.
Always keep this manual within reach for the user!
Coffee Queen Harmony hot n cold, a fully-automatic freshbrew machine.
- Making coffee cup by cup- With an internal grinder for grinding of coffee beans- Serving cold, filtered water – carbonated or still- Jug facility with key switch- 11 choices of drinks,- 3 ingredients canisters + bean container,- Brewing mechanism with coffee filter- Electronically temperature controlled- Adjustable coffee strength- Illuminated cup while brewing- Clock functions
Facts:
Height 925 mmWidth 420 mmDepth 580 mmWeight 43kg (+ ground cabinet 25kg) packing approx.5kgTankage 2,4 litreElectricity 230V/2200W+170WWater connection ½”outside thread (enclosed)Chilled water 15-20 litre / hourRefrigerant HFC-134AIngredients canisters 1. espresso
1. chocolate1. topping1. coffee beans
3.
3. Overview of components, front Harmony hot n cold TT
4.
Outlet for drinks
Cupholder
Drip tray insert
Drip tray
Drinks
Door lock
DisplayStrength of drinks ++ / - -
Key switch
Bean containerLid, bean container
Optional:Base cabinet with storage andlarge waste bin.
OutletCold water
3. Overview of components, mixer system. Harmony hot n cold TT
5.
Detail; Ingredients; Width; Height; Capacity./cups Volume/litre Amount/unit
Canister; coffee beans 165 190 2,5kg / 208 7,3 1Canister; espresso 67 250 0,5kg / 220 2,55 1Canister; chocolate 67 250 1,5kg / 50 2,55 1Canister; topping 67 250 1,1kg / 120 2,55 1
Brewingmechanism
Outletdrinks
Waste box
Beancontainer
Grinder
Mixer bowls
Chute
Ingredients-canister
Door lock
ON/OFFswitch
FUSE holder
Outletcold water
6.
4. Service. Installation and start Harmony hot n cold TT
1. Place brewer on a flat Connect the electrical plug to a separatelevel and waterproof surface. grounded wall socket 230V 10A
OBSERVE! Make sure there is a spacebehind the machine for free flow of air.( minimum 10cm ).
2. Connect attached water tube to cold water with an R 1/2”.Make sure that the water hose not are kinked anywhere when machine ispushed into place. Please flush the water tube before connecting to machine, this to avoidany particles to damage the inlet valve.
3. Open the water inlet.
4. Turn on the ON-OFF switch inside the door.
Water is been filled into the tank automaticallywith 2,4 litres of water. The heating will not startbefore the water level reaches the level sensor.
Set temperature is approx 97ºC.
5. Close door.
6. When the water is heated to right temperature. ”please wait”The message ”please wait” will disappear.
NOTE! Machine must be heated before chilled water can be in use.
7. Push button for chilled water until water is coming in a even flow.
8. Wait for approximately 10 minutes then machine isready to use.(IThis for water shall getting cold).
”Please wait”
90º
ON / OFFswitch
7.
4. Service. Installation and start Harmony hot n cold TT
9. Fill canisters with ingredients.
Take out (this to avoid unnecessaryspillage in the machine) ingredientcanisters and fill them with ingredients.
10. When placing the ingredient canisters;
Make sure that the outlet pipes on theingredient canisters are touching the steamtraps. see (A).
(A).(A).
11. Fill bean container with coffee beans.
1. Remove lid on bean container and fill bean container with coffee beans without additives (as tasted oils or sugar).
2. Open closing hatch on bean container.
When water in tank has the right temperature
the message ”Low temp” will disappear and ”please wait”the machine is ready to use.
8.
Brewing of coffee in cup, etc.
1. Place a cup in the centre of the cup holder..
2. The strength has a standard setting,if you wish to increase or decrease it, do as followsif not continue to point 3.
Stronger drink; Increase by pushing + or ++ for 5% or 10%
alternative Weaker drink; Decrease by pushing - or -- for 5% or 10%
(the indication lamp will go up or downdepending of choice).
3. Choose drink by pushing on the button to the rightof each menu.The display will show; ”Please wait”, and the cupwill be illuminated.
Wait until the light on cup and message”Please wait”has been turned off before you take your cup.
Cold water in a glas.
4. Place a glas under the outlet for cold water (A).Then push button for cold water.
5. Operation: Brewing of coffee in cup Harmony hot n cold TT
2.
3.
1.
A.
Brewing of jug.
1. Lift up the cupholder.Place a jug in the centre of drip tray.
2. Turn on the key with jug symbole clockwise.
3. 6 cups of brewing is standard settings,
Change amount of cups by pushing + or - button.Optional up to 12 cups or down to 1 cup brewing.
4. Push the button for drink 1.
Wait until the light and message ”Please wait” hasbeen turned off before you take out the jug.
Serve a jug with good coffee.
5. Operation: Brewing of jug Harmony hot n cold TT
9.
Serving pot 1, 8Lart.nr. 110001
Serving pot 1,2Lart.nr. 1103091
2.3.
4
1
10.
6. Cleaning program. Harmony hot n cold TT
2.
By cleaning means that water is flushed and whipper motor rotates.
The mixer bowls can easily be cleaned with the key switchin ”cup” (normal) position.
Automatic cleaning of mixer bowl No:2
Weekly cleaning! Automatic cleaning of mixing bowls 2 or 3.If you only wish to clean the mixer bowl and whipper house; Follow theseinstructions:
1. Place a jug in the drip tray.2. Turn the key (1) slowly ninety degrees and back again.3. Push button (3) for 6 seconds.
After 4 seconds the signal will go faster.
After 6 seconds the mixer bowl and the whipper house no.2starts to be cleaned for 5 seconds.The display shows: ”Cleaning 2”.
Automatic cleaning of mixer bowl No:3
1. Place a jug in the drip tray.2. Turn the key slowly ninety degrees and back again.4. Push button (4) for 6 seconds.
After 4 seconds the signal will go faster.
After 6 seconds the mixer bowl and the whipper house no.3starts to be cleaned for 5 seconds.The display shows: ”Cleaning 3”.
3.
4.
11.
6. Cleaning program CLEANING: Harmony hot n cold TT
Automatic cleaning of In/Outlet valves:The In/Outlet valves can easily be cleaned with the key switch in ”cup” (normal) position.
1. Place a jug in the drip tray.
2. Turn the key slowly ninety degrees and back again.
3. Push button for drink 1 and 2 at the same time for6 seconds.
Keep buttons down.
All In/Outlet valves will now start to open and closewith 2 pulses/second in 10 seconds or as long as youhold the buttons.
The display shows: ”Cleaning valves”.
4. Push button for drink 2 for making a brewcycle and flush remaining water and scale from thecleaning.
2.
4
3
3
12.
6. Cleaning program CLEANING: Harmony hot n cold TT
1. Push ”+” button for 6 secondsAfter 4 seconds the signal will go faster.
The display shows: ”Change paper/Rotate””Push E/ +”
2. Push + button.
The display shows:”Rotate cycle without water”.
3. Push button for drink 2.The display shows: ”Rotate”
The brew mechanism rotate one turn without waterand ingredients and the mechanism falls into positionif it has been dismounted.
Observe! The push rod shall be in position ”8 o clock”
If not take out again and repeat the procedure.
Eight (8) o clock.
Rotate brew mechanism without water or ingredients:
The brew mechanism can be rotatedwithout water and ingredients with the key switch in ”cup”(normal) position.To be used when brew mechanism has been dismounted forwashing and shallbe remounted.
1 2
3
1. Turn the key slowly ninety degress and back again.
Push button for drink 1 for 6 seconds. Fig. A2. After 4 seconds the signal will go faster.3. After 6 seconds The display shows; ”Open door”
”load detergent”.4. Fill 25gr detergent (one portion bag, see fig. A ) into the brew
mechanism. fig. B.(Detergent will be supplied from your dealer)
5. The display shows; ”Close door”
6. The display shows; ” When ready press key”Place a jug into the drip tray and push button for drink 1
7. The display shows; ”Cleaning mixer” (2....)8. The display shows: ”Rinsing coffee” ”Soak time:”
The machine start to count down from 300 seconds.9. The display shows. ”Brewer cycle” the machine is counting down.
13.
Automatic cleaning of brew mechanism, mixing bowl:Shall been done every week.The brewmechanism can easily be cleaned with the key switch in ”cup” (normal) position.
6. Cleaning program CLEANING Harmony hot n cold TT
To stop cleaning process: push ”Stop” button.The brew mechanism will go back to start position. NOTE! Dont stop the process when detergenthas been loaded the cleaning process must be finished.
10. Push ”+” button for 6 seconds
11. The display shows: ”Change paper/Rotate” ”Push E/ +”
12. Pusk button for drink 2.
13. The display shows; ”Preparing paperload”.
14. The machine will rotate in position.
15. The display shows,”Change paper”
16. Open door, dismantle, clean and reassemble brew house.
see page 14.
17. Close door.
18. Machine is ready to use again.19. Take out a cup of coffee and pour it out to make sure that there is
nothing left of detergent.
IMPORTANT! Cleaning of brew house.After the automatic cleaning program is finished. Clean brew house! This must be done, to makesure that you will remove residual detergents and coffee remains!Dismantling and cleaning/washing brew house: Do as follow in paragraph 10- 19.
If machine not will goback in start position.Restart machine.
6
1
10.
12.
1
Fig. B
14.
6. Cleaning program CLEANING Harmony hot n cold TT
Dismantling and cleaning brew house:
Dismantle brew house:
1. 2.
4.
Reassemble brew house.NOTE! When reassemble brew housemake sure that (B) wiper are between (A)arms.
3. Flush brew house!To remove detergent and coffee remnants.
Important! wash carefullyTo remove cleaningand coffee remains
15.
7. CLEANING: Weekly cleaning Harmony
(D)
Dismantle : Mixer system
1.Loosen outlet hose (A) andturn lock knob (B)anti-clockwise.
3.Loosen whipper (D) pull whipper straight out from themachine.
(E)
(A)
(B)(C)
Cleaning
Wash these parts:
.6.
A. Mixer bowl
B. Steam trap
C. Whipper
D. Assembly plate
Make sure this parts are drybefore use
2.Loosen mixer bowl.Pull apart (C).
4.Turn lock knob anti-clockwise.(E) until it stops
5. Clean with a wet rag anddrought drily.
16.
7. CLEANING: Weekly cleaning Harmony
REASSEMBLE: Mixer system
7.Reassemble the assembly plate by turninglock knob (F) clockwise. INSPECT gaskets.
pil (G).
9.Assemble whipper , pull untilyou hear a clicking noise. (H).
10.Assemble mixer bowl and steamtrap (J) see picture.
11.Easily push the mixer bowltowards, according to (K) and lockwith lock knob (L).Connect outlethose (M).(NOTE! make sure that all waterhose are connected at right place
(H)
(J)
(J)
(J)
(K)
(M)
(L)
(G)F F
F
8.Make sure that the motor whippers plane sidewill be in accordance with the whippers planeside. see next (G) and picture (H).
INSPECT
INSPECT
17.
8. Cleaning and maintenance Harmony hot n cold TT
Cleaning when needed.Outside cleaning; use asoft rag and liquid cleaning agent toprevent scratches.
Cleaning of grinder.
Should be done every sixth month, of an authorizedservice technician.
Cleaning bean container.
1. Shut closing hatch.2. Dismantle bean container.
Use a soft rag and liquid cleaningagent to prevent scratches.
Note! Make sure that all parts are drybefore use.
4. Remount the screen assembly and close the door. Then the machine willreturn to start position and the machine is ready for use.If machine not will go back in start position. Restart machine!
5. Make a cup of coffee and throw it out.To make sure that there is nothing left of detergent.
18.
8. Cleaning and maintenance. Harmony hot n cold TT
Dismantling and cleaning coffee filter.A tool dismantling the coffee filter, comes with machine.
Prolonged contact with cleaning agent may damage the screen assembly. Once this isdone, the screen should then be thoroughly rinsed with dish soap and warm water to removeany leftover residue.
3
1. Push ”+ button” for 6 seconds.
After 6 seconds the display shows; ”Change paper/ Rotate”
”Push E/+”.
2. Push button for drink 2.
The display shows; ”Preparing paperload”.
The machine will rotate in position.
When the display shows,”Change paper” open the doorand insert the dismantling tool (A) through the brewer spoutall the way to the back of the cylinder, then slide it up untilcontact is made with the screen assembly.Fig. 1.
Push up on the rear of the screen assembly until it pops outof the cylinder.Fig. 2.
3. Soak the screen assembly in a solution of 25gr. cleaningagent in 3dl water for a maximum of 10 minutes.Fig. 3.
.10 minutes
.3 dl water
97º Celsius
Cleaning agent: (brew mechanism) Coffee Queen article no 1104161Filter: (brew mechanism) Coffee Queen article no 47200213Tool: (dismantling filter) Coffee Queen article no 4720090
1
2
Fig. 2. Fig. 1.
Fig. 3.
(Cleaning agent is supplied by your retail dealer)
(A)
8. Maintenance, Grinder. Harmony hot n cold TT
19.
Outlet forgrinded coffee
Closinghatch
Beancontainer
Grinder,house
Adjustments:The adjustment of the blades is set at the factory.All maintenance, adjustments and installations shall be done of an Coffee Queen authorizedservice technician. This coffee grinder is only constructed to grind coffee beans withoutadditives (as tasted oils or sugar).Any kind of use apart from that is improper and therefore unauthorized, the producer refuses allresponsibility for damages arising from improper use of the coffee grinder described in thisinstruction.
20.
8. Cleaning and maintenance Condenser Harmony hot n cold TT
Condenser cleaning: Chiller unit. Must be cleaned every 6 month. With an extremilydusty environment you must have a much moore frequently cleaning .
1. Loosen screw. see fig A.
3. Clean condenser (C)from dust,(betweencooling flange) by using abrush, vacuum cleaner orcompressed air.
(C)
2. Loosen hose couplings.Pull out chiller unit.see fig B.
21.
7.
1.
5.
2. 3. 4.
6.
1.
3. 4.
9. Cup counter and Easy Access Harmony hot n cold TT
1. Push ”-” button for 6 seconds.
After 4 seconds the signal will go faster..
The display shows: ”Total xxx cups”
2. Push button for drink 2.
The display shows: ”Choice 1 free xxx cups”
3. Push button for drink 2.
The display shows ”Choice 1 coin xxx cups”
4. Push button for drink 2.
The display shows ”Choice 1 xxx cups in can”
5. Push ”+” button to reach to ”choice 2” etc.
6. Push choice 3 to reset the counter.
7. Push ”Stop” button to go back to user mode.
Cup counter:The machine has a cup counter which is available to see and reset with the key switchin ”cup” (normal) position.
Easy Access:Volume and strength can be adjusted with±15% with the key switchin ”cup” (normal) position.
1. Push ”+” and ”-” button at the same time.
After 4 seconds the signal will go faster.
The display shows: ”Easy access” ”strength 1 100%”
2. Choose the drink you want to change
by pushing”+” or ”-” button.
3. Push button for drink 2.
The display shows: for example. Volume 4 and”
Blinking 100%”
Change by pushing ”+” or ”-” button.
4. Push button for drink 2 to confirm the change.
Press ”stop” to go back to user mode.
Failure messages which can mostly be corrected without any help from
service company
1. The display shows; ” Blocked” ”Water level low”Please check incoming water connectionTurn off the machine with the main switchwait for 10 sec. and turn on again.
2. The display shows normal: but no drink is coming.Possible cause of failure:Mechanical stop in the ingredients canisters or whipper.
Measure: Try to find the cause of failure. Clean the mixer systemand try again.
22.
10. Safety functions. Harmony hot n cold TT
The machine is equipped with following safety functions
1. Indication of doorDoor not closedThe display shows; ”Door open”
2. When machine is not in use:Valves are blocked.
11. Failure messages.
”Door open”
”Blocked”
Transport and no use in long time.1. Turn off the switch, pull out the plug and close incoming water tube.2. Empty the water tank.3. Keep machine free from frost.
Long machine storage at temperatures below 0ºC (zero degrees celsius) can causedamage of the machine. Total emptying of water is recommended.
12. Storage / Transport.
13. Dimension sketch. Harmony hot n cold TT
23.
14. Circuit diagram.
24.
25.
15. Installation of coin mechanism.
Installation of coin mechanism for freshbrew machines CQ.
IMPORTANT: Installation must been done of an authorized technician.
1. Assemble coin mec and connect to display-card, placed inside door. (see fig. 10). ( Connect with the enclosed fig.(10) cable (A). Make sure that power is off.
(A)
Connection placement; Version 212
Connection
16. Cooling unit, cooled water Harmony hot n cold TT
26.
Compressor
Condenser
Dryer
ThermostatFan
Cooling unit
Water IN
Water OUT
17. Exchange of water cleaning filter. Change every sixth month
To make sure a high quality on your drinks. change water cleaning filter every sixth month.
Exchanging water cleaning filter.
The display shows: ”change filter”
1. Loosen cartridge by turn it1/4 lap. See fig. A. (Open)
2. Assemble the new cartridge by turn it
1/4 lap. See fig. A. (Close)
Fig. A.
3. Reset Timer: go to Easy Access.
(Push ”+” and ”-” button at same time.
Change with ”+” or ”-” button, until display
shows ”filter”). Push ”E” button twice to reset counter.
(By reset counter means that a new adjustment is done,
valid a new period of 6 month before
the display shows ”change filter” again).
4. Now push the button for cold water.
Push until water is coming out in a regularly flow.
Only use Coffee Queen original water cleaning filter:
Article no: 1505344
27.
Filter from below
28.
Description; Art. no Pos. no. Amount/unit
Level sensor complete 120548 1 1Gasket, silicone for sensor 150118-02 2 1Heating element 2200W 230V 1601361 3 1Water tank complete 7001305 4 1Gasket, (lid water tank) 1206591 5 1
Motor gear 145 rpm, without axle 1604612 6 4Motor axle for 1604612, 16mm 1604614 7 4High limit controll, Bulba 73mm 220220 8 1NTC thermistor 1604133 9 1Rubber grommet , inlet for NTC thermistor 1605361 10 1Valve outlet 24 V DC 120627-03 11 4 Membrane 1501191 11 4Inlet, for valve 160537-03 12 4Plug (watertank) 120407 13 1Bulk head adaptor, mixing bowl 120498 14 2Switch 2 pol (illumin.) 160801-04 15 1Steam trap 120500 16 2Mixing bowl 1204852 17 2Whipper 1204842 18 2Motor whipper 24V F 1604591 19 2Whipper motor plate 1604592 20 2Assembly plate 1204781 21 2Slinger disc 120480 22 2Grommet for whipper pin 120655-02 23 2O-ring for assembly plate mod. F 120638 24 1Outlet brew mech./angled 1201481 25 1Outlet brew mech./extender 1201482 26 1Outlet brew mech./adapter 1201483 27 1O-ring 36,2 x 3,0 120650 28 1O-ring 15,6 x 1,78 120652 29 1Foam (filter) for dust trap 1201282 30 1Dust trap 1105350 31 1Valve, double outlet 24V 1104525 32 1
Silicone hose inlet / water tank 8x12 L=530 150501 33 1Silicone hose water tank / drain 8x12 L=1000 150501 33 1Silicone hose The 8x12 L=570 150501 33 1Silicone hose water tank 8x12 L=320 150501 33 1Silicone hose outlet valv./choco 8x12 L=280 150501 33 1Silicone hose outlet valv./brewm 8x12 L=330 150501 33 1Silicone hose mixer 1/Outlet 8x12 L=220 150501 33 1
Note! Silicone hose 150501 (by the metre (amer. meter)
18. Spare parts lists. Harmony hot n cold TT
29.
18. Spare parts lists. Harmony hot n cold TT
Description; Art. no. Pos. no. Amount/unit
Fan 1604171 40 1Grid cover for fan 1604172 41 1Valve inlet 2,5 l/min 1206371 42 1Solid-state relay 1604201 43 1
Electronic card Ver. II 1604102 44 1
Fuse 4 Ampere (slow 5x20) 1604381 45 1 Decal - fuse 5/1Amp. slow 1701983 46 1 Decal - fuse 4 Amp. slow 1701982 47 1Brew engine unit compl. 1201432 48 1Brewer dock white 120144 49 1 Pin 3,5x36 1201453 50 1 Pin 2,0x36 1201454 51 1Microswitch V5J (brew engine) 160829 52 1
Main supply cable, Europa 160565 53 1
Inlet-plug and socket 160570 53 1Fuse holder 1604351 54 2 Fuse 2 Amp. slow 5x20 1604382 55 1 Decal - fuse 2 Amp. slow 1701981 56 1Connection block PA 80 160351 57 1Gable (connection block) PA 80 160352 58 1Transformer 710150 59 1Micro switch 160841 60 1
Waste box, top cabinet 1105356 61 1
Brew mechanism, complete 7001137 64 1Tool, dismantling of filter 4720090 65 1
Grinder 230 VAC 1604752 69 1Bean container 1105509 70 1Lid, bean container 1105510 71 1Operating capacitor 12 μF 832392 72 1Relay 160239 73 1Socket, relay 160246 74 1
Water filter compl. + holder with patron 1505350 75 1 Filter head 1505346 76 1 Filter cartridge 1505344 77 1
30.
Description; Art. no. Pos. no. Amount/unit
Ingredients canister B67 x H250 plastic 1205617 80 3Lid 67 1205671 81 3Chute, left 120489 82 1Outlet, canister 120633 83 1
Cup holder 1102032 84 1Diode lamp complete 1104544 85 1Drip tray 1105351 86 1Drip tray insert 1102031 87 1Flat conductor cable 1606727 88 1
Display board Ver 1 1604101 89 1Key-switch 1202551 90 1Membrane switch 1603842 91 1Lock with clamp(door) Instant 120250 92 2 Key, (door) Instant 120251 93 2Service key (tool) 180290-03 94 1Drip pan, base cabinet 1204611 95 1Foot, base cabinet 120316 96 4Foot, adjustable 1203202 97 4Drip tray sensor (coil spring/ close coiled) 120229 98 2
Inlet hose 3/4”x1/2” (water main) 150541 99 1
Cooling unit 1104517 108 1Compressor GD 40 MB 1104580 109 1Starting capacitor för GD 40 MB 1104582 110 1
Thermostat K-50 L3019 1104594 111 1
Filter-dryer 10g 6,2-2,5 1104590 112 1
Condenser STFT 10215 MINI 1104609 113 1
Klixon 1104581 114 1Fan SUNON MBT 1104611 115 1Cooling unit 1104612 116 1JG corner 8x8 (1037) 1104613 117 1Relay 1104583 118 1
18. Spare parts lists. Harmony hot n cold TT
31.
Description; Art. no. Pos. no. Amount/unit
Motor C0212.06 837932 150 1Inlet housing 838916 151 1Slotted pan head screw DIN 923 - M4x12 838753 152 1Adjustment shaft 837992 153 1Adjustment pinion 837991 154 1Pressure spring 838709 155 1Allen set screw DIN 915 - M5x10 839230 156 1Slotted cylinder head screw DIN 84 - M4x50 838704 157 3O-ring 839252 158 1Worm shaft 837863 159 1Allen screw DIN 912 - M4x4 - stainless steel 838869 160 1Grinding disc carrier - fixed 837985 161 1Fixed grinding disc 837247 162 1Grinding disc carrier - rotating 838141 163 1Rotating grinding disc 837248 164 1Pan head screw DIN 85 M5x8 835579 165 4Washer DIN 433 - 10,5 stainless steel 839261 166 1Hexagon nut left-hand thread 838642 167 1Grinding housing 839259 168 1Allen screw DIN 912 - M4x45 838876 169 3Outlet tube, metal 839260 170 1Allen set screw DIN 916 - M4x10 836503 171 1Outlet, silicone hose (30mm) 16x20 1505081 172 1
18. Spare parts lists. Grinder Harmony hot n cold TT
32.
Description: Article no. Pos.no. Amount / unit
Deflector, Cylinder 4720008 200Pin, Crank Arm 4720010 201O-ring Piston 4720012 202Rubber Ring, Piston 4720013 203Teflon Seal 4720014 204Plate, Top 4720015 205Screw, 8 x 1/2, Truss, AB, TAPP 4720016 206Cylinder 4720017 207Plug, Vent, Cylinder 4720018 208Screw, 4-40 x ¼, Truss 4720019 209Screw, 8-32 x ½, Truss 4720020 210Assembly, Filter Screen, Poly, #44 47200213 211Seal, Brew Chamber 4720022 212Bar, Latch 4720023 213Carriage, Wiper 4720024 214Rod, Carriage, Wiper 4720025 215Retaining Ring, .250 4720026 216Wiper, Complete 4720027 217Brew Chamber 4720028 218Spring Clip, Latch Bar 4720029 219
Housing, Vertical Rod 4720001 220Cam, Triple 4720002 221Unwipe Arm Assembly 4720003 222Spacer, Wipe Arm 4720004 223Spring, Wipe Arm 4720005 224Retaining Ring,TRU ARC 4720006 225Vevarm 4720007 226
Plate, Ret., Cycle 4720030 227Plate, Ret., Support 4720031 228Latch, Block, LHS 4720032 229Latch, Block, RHS 4720033 230Retaining Ring 4720034 231Tube, Outlet, Water 4720035 232Wrap, Brew Chamber 4720036 233Shim 0,2 1303501 234Shim 0,5 1303502 235Spacer, Sil., 3/16 x .350 x 1.5 4720038 236Spring, H-Frame 4720039 237H-Frame 4720040 238Screw, 8-32 x 3/4, PAN 4720041 239Pin, Grooved, 3/16 x 1.25 4720046 240Wipe Arm, Assembly 4720048 241Vertical Rod, Welded 4720049 242
18. Spare parts lists. Brew mechanism Harmony hot n cold TT
33.
19. Exploded View. Tank and mixing system Harmony hot n cold TT
2
1 8
5
3
9
15
14
27
26
25
19 28
29 30
10
16
17
21 18
4
31
12
22 23 24
13
33
20
Pos. 33 Silicone hose sales by metre
33
33
33
11
11
6 7
32
34.
19. Exploded View. Parts in machine Harmony hot n cold TT
54
47
45
44
59
52
46 5 amp
57 61
53
43
60
70
54
55
56
48
49
50
51
64
Fuse holder
FUSE 2 AT 5x20
decal fuse
Waste box
Fuse holder
FUSE 4 AT 5x20
decal fuse
41
40
42
73
74
72
69
71
58
65
Filter
76
77
75
53
35.
19. Exploded View. Ingredient canister Harmony hot n cold TT
Parts; canister 67 x 25081
80
82
83
endast espresso
36.
19. Exploded View. Door Harmony hot n cold TT
Diode lamp complete1104544
89
92
90
84
87
86
85
88
91
96
95
93
94
92
93
94
97
99
98
Drip traysensor
109
110
113
112
115
111
117
114
116
118
108
37.
19. Exploded View. Cooling unit Harmony hot n cold TT
150
159
160
167
166
165
168
163
164
162
161
158
151
157
153
156
154
155
152
170
17216
9
171
38
19. Exploded View. Grinder
39.
19. Exploded View. Brew mechanism 1
201200
206
202
203204
219
205
210
213
208
217
211
209
212
214
215
216 218
207
40.
19. Exploded View. Brew mechanism 2
220221222223225 224
241
234235
237
242
239
236232233
231
228 229
227230
238
240
226
Harmony, hot n cold TT
COFFEE QUEEN
Art. nr/Art. no.1704566
FOR SERVICE
Your retail dealer
...............................................................................
...............................................................................
...............................................................................
COFFEE QUEEN AB, Box 960, 671 29 ARVIKA, besöksadress; Korpralsv 1B,Tel vxl; +46 (0)570-47700, Fax; +46 (0)570-47719E-mail: [email protected] www.coffeequeen.se