1.what’s new in smarttool? 2.what can smarttool do for my borehole? 3.meet the hardware...
TRANSCRIPT
Customer Training Course
The FLEXIT SmartTool
1. What’s new in SmartTool?
2. What can SmartTool do for my borehole?
3. Meet the hardware
4. MeasureIT software that sets-up, runs, calculates & checks.
5. Practical exercises with the SmartTool.
6. DisplayIT software, showing off the results.
7. The Single-shot StoreIT menus.
8. The Multi-shot StoreIT menus.
Training modules
1 What’s new --
SensIT probe -- sealed and unopenable
no plugs or cables
1 What’s new --
StoreIT data pad -- sealed in an Aquapac,
-- hung on a lanyard.
SensIT & StoreIT --ten years power - built in,
no batteries or chargers.
no plugs or cables
1 What’s new --
SensIT, StoreIT & your PC --
transfer data by automatic fast radio link.
1 What’s new --
Quality assurance system --
warns of magnetism or movement
1 What’s new --
Shock resistant to 6000G
1 What’s new --
SensIT in its pressure barrel
Watertight to 4000 metres
Shockproof to 6000g
2 What can SmartTool do for me? --
Four different tasks
Single-shot survey ----- read data on StoreIT ----- combine data on PC to make …
Multi-shot survey 3D hole path using magnetic azimuth measurement
Orientated survey ----- less than 30m, close to vertical 3D hole path maintaining azimuth with orientation rods
Tool or Core orientation, usingGravity roll angle ---- for inclined holesMagnetic toolface angle --- for vertical holes
Eight measurements at each DEPTH (shot) recorded by SensIT
1 Dip (Inclination) of hole 2 Direction (azimuth) of hole for Positional Survey
5 Magnetic field strength 6 Magnetic dip angle for Quality Assurance
3 Gravity Roll angle of SensIT 4 Toolface angle of SensIT for Orientation
7 Temperature of SensIT 8 Depth, time and datefor the record
2 What can SmartTool do for me? --
2 What can SmartTool do for me? --
Survey
2 What can SmartTool do for me? --
Orientation Setting the zero Gravity Roll Angle
2 What can SmartTool do for me? --
Orientation Setting the zero MagneticToolface Angle
The Earth’s Gravitational Field
2 What can SmartTool do for me? --
Quality assurance.
The Earth’s Gravitational Field
If Grav. Field is not 1.00 G, then SensIT is moving; Dip and Azimuth may both be unreliable
2 What can SmartTool do for me? --
Quality assurance.
The Earth’s magnetic field
Variation - angular difference between True North and Magnetic North
Magnetic Field Strength - the force of the earth's magnetic field
Magnetic Dip Angle - angle the field force lines make with the horizontal
At each place on the earth's surface, these values are known.
2 What can SmartTool do for me? --
Quality assurance.
Set the threshold for the local magnetic environment
2 What can SmartTool do for me? --
Quality assurance.
Identify the unreliable azimuths
2 What can SmartTool do for me? --
Quality assurance.
1. What’s new in SmartTool?
2. What can SmartTool do for my borehole?
3. Meet the hardware
4. MeasureIT software that sets-up, runs, calculates & checks.
5. Practical exercises with the SmartTool.
6. DisplayIT software, showing off the results.
7. The Single-shot StoreIT menus.
8. The Multi-shot StoreIT menus.
Training modules
1. What’s new in SmartTool?
2. What can SmartTool do for my borehole?
3. Meet the hardware
4. MeasureIT software that sets-up, runs, calculates & checks.
5. Practical exercises with the SmartTool.
6. DisplayIT software, showing off the results.
7. The Single-shot StoreIT menus.
8. The Multi-shot StoreIT menus.
Training modules
DATA, Shows Survey SETTINGS #, Hole Ref. & Depth Timer } +/-
Azimuth Depth }3 +/
Inclination Hole ref. } +/- OK
Mag Field Enter Archive OK
Mag Dip Set Mag Field/Dip OK
G.R/angle Zero G.R/angle OK
M.T/face Zero M.T/face OK
Time Set time +/- OK
Date Set date +/- OK
Temperature Multi-shot mode? OK
>>Press SETTINGS to exit >>Press NEW to start timer
Here the DATA button displays each reading from a Single-shot survey.
7 The StoreIT Single-shot menus
First survey press New Next Survey press New
SETTINGS 1 Change SETTINGS 2 Change SETTINGS 3
Hole ref. } Next Depth Hole ref.
Start depth } Depth interval Start depth
Depth interval } 5 End survey Depth interval
Direction } >>Press DATA Direction
Time interval } to continue survey End session -download
Set time >>Press DATA
Set date for next survey
Single-shot mode?
>>Press DATA for first survey
• Here the DATA button is only a switch from the SETTINGS menus back to the survey operation. Then, to start a survey, press NEW
8 The StoreIT Multi-shot menus