Show them that you shoot a Mathews... ask your retailer about our logowear!Complete your Mathews bow with our exclusive accessories!

Mathews Micro Rest Precision engineered to work in perfect harmony with Mathews bows, the Micro Rest features independent micro-

adjustments, a solid double-encased bushing system, an internal spring that doesn’t foul or bend,and a full-length safety guard. Two sizes (0” or 1” overdraw); two models (left or right hand); twofinishes (silver or black anodized). Choose your combination of size, model and finish.

New ArrowWeb™ Quivers have HarmonicDampers built right in!• Adjustable grippers hold carbon or aluminum arrows• Machined aluminum construction for lightweight durability• Harmonic Dampers eat up vibration and noise

Mathews premiumbow caseBoth distinctive anddurable, this bow case iscrafted from the very finestmaterials and will protectyour bow from the rigors oftransportation.

Two sizes Standard: forbows longer than 35" Compact: for bows 35" or shorter

Heavy-duty lockablezippers for security

Rubber-cleated bottomfeet for protection

Storage galore - sixcompartments in all

Rich leather grips Two compartments- one for your bow,one for arrows

Rugged 600 denierouter fabric

Dual outside pockets

Two-tone stylingEmbossed fineleather logoRugged, double-

stitched construction

Detachable one-piece

Non-detachable two-piece

• A simple turn of two wing boltsand quiver slides from bow

• Fits all Mathews bows 38" orshorter (longer bows requireoriginal one-piece quiver whichis still available)

• Two pieces attach sepa-rately; become an integralpart of the bow

• Fits all Mathews bowsexcept the SQ2 and MQ-32"

Five arrowcapacity

Mathews t-shirts... 100% cotton crew neck t-shirts. Black and white feature Mathews logo on the left chest. Blue with white tie-dye stripe features Mathews Genesis logo. Sizes: M-2XL

All-new lineup of Mathews and Zebra caps - show ’em what you shoot! One size fits all.

• Sandwich bill blackcap with Velcro®

adjustment.

• Leather billnatural-colored cap.

• Two-tone, leatherbill cap with leather patchfront, embroidered logoon the side.

• Two-tone Zebra cap withVelcro® adjustment.

• Camo cap (Realtree®

X-traTM) with natural-

colored logo

Waxed cotton jacketThis waxed cotton jacket has a classic look. Richleather collar and pocket trim lend style. Warmthis afforded by a quilted plaid flannel jacket lining.Mathews logofront and back. S-3XL

Camo henley... in the woods or around the house100% heavyweight cotton long sleeve henley features Realtree® XtraTM camouflage. You’ll wear this for warm weather hunts. Natural-colored logo front. Five-button placket. Sizes S-3XL

Camo jacket... perfect afieldZippered front, insulated jacket fea-tures Realtree® Xtra,TM the same pat-tern you’ll find on newer Mathewsbows. Knit cuffs and waist. Perfect forhunting. Natural-colored embroideredlogos, front and back. Sizes S-3XL

Shooter shirts... black or white!Classic 3-button polo shirts are athome on the range or in the office.Mathews logo front, on either black or white. Zebra logo available only on black. White: S-4XL Black: S-2XL

Crew neck sweatshirts... with bold front logos!These medium gray mid-weight sweatshirts featureeither the Mathews or Zebra logo spanning thefront. Sure to become yourfavorite sweatshirt. Sizes: S-2XL

Hooded sweatshirt... a favorite!Everyone’s favorite, this pullover hooded sweatshirt will keep you warm. Wear it outside or underneath. Cotton/poly blend. Mathews logo front. Sizes: M-3XL

Button-down black denim shirtThis 100% cotton black denim shirt has a button-down collar. Double stitched for extra durability.Sizes: M-2XL

Sport jackets... sizes to fit kids, too!Some call these baseball jackets. They feature a smoothnylon outer shell with quilted lining. Logo front and back.Available in Mathews SoloCam or Zebra ZS Twist. Adult sizes: S-3XL Youth sizes: S-XL

’02 owner’s manual pgs. 2& 15 3/17/03 12:21 PM Page 1

14

Maintaining your Mathews™ SoloCam® bow...Never dry fire your bowNever shoot any bow without an arrow on the string. Without the arrow to absorb the energy,

dryfiring can damage your bow and can cause personal injury. Damage to your bow due to

dryfiring will not be covered under the warranty.

Periodically check strings and cablesAlways inspect your bow for frayed strings and cables. Replace damaged strings and cables

immediately. Mathews strings can be waxed and maintained as any other fast-flight string.

Please make sure you are using the proper string for your bow.

Bushings are self-lubricatingYour Mathews SoloCam bow requires no lubrication – all bushings are self-lubricating.

Do not alter your bowAny alterations to your Mathews SoloCam bow will void the warranty. Alteration could cause

damage to the bow or personal injury.

Use only a double-pull bow pressNever use a single-pull bow press. We recommend a double-pull press to avoid damage to

your riser or bow. Damage caused by a single-pull press will not be covered under warranty.

Repairs and ShipmentVisit your Mathews retailer for servicing and repairs. All bows and warranty parts returned

to the factory will require a Return Authorization (RA) number that your retailer can secure.

Your retailer will handle all warranty issues for you. The RA number must be clearly printed

on the outside of the box near the address label. If a package does not have an RA number,

our shipping department will refuse it.

Like many of the world’s top competitive shooters, you, too, can now say “I shoot a Mathews.” Congratulations!

Your new Mathews bow features the latest design innovations and the highest quality components. They team up to create a bow that’s fast, smooth, quiet and accurate. To ensure your bow’s peak performance, take a few moments to look over this owner’s manual.

Good shooting and good hunting!

Setting up your new Mathews bow...As you probably know, once your Mathews bow is properly tuned, it will stay intune thanks to the single-cam design. However, initial setup of draw length, weight,nock point, etc. is critical to maximize the performance of your new bow.

Draw LengthYour Mathews SoloCam bow comes set at the longest draw length setting unlessyour retailer has indicated otherwise. Mathews offers several cam sizes to helpensure optimum draw length and performance for your measurements and shooting style. The draw length on your bow is adjustable on the cam a maximum ofone inch down from the peak draw length. This is accomplished by moving thestring loop to any of three adjustment posts on either side of the cam. The number1 post would be the longest draw length for that particular cam. For example: toshorten the draw by 1/2 inch, the string would be moved to the number 2 post onboth sides of the cam. The Mini MaxCam can be adjusted down from its peak drawlength, approximately 1/2". This is accomplished by moving the string loop to the secondary post on the cam.

Draw WeightMathews SoloCam bows have a ten pound weight reduction range from your bow’s peak weight (example: if your bow has a peak weight of 70 pounds, you can adjust itas low as 60 pounds). Draw weight adjustments are made using either a 3/16" or 7/32"Allen wrench. Turn the limb bolt clockwise to increase the draw weight and counter-clockwise to decrease the weight. Each rotation is equivalent to three or four poundsof draw weight. It is very important to adjust the limb bolts equally but do notexceed 5 full turns out from maximum draw weight. Your Mathews SoloCam bowwill generally perform best at its designated peak weight.

Nock Point InstallationThere are many variables involved in determining where to install your nock point.These include: type of arrow rest, arrow spine, whether you use fingers or a releaseaid, and your hand placement on the bow. As a general rule, the nock point shouldbe set perpendicular (90°) to your arrow rest or somewhere within 1/2" above the 90°point. This guideline is a starting point – you may need to move your nocking pointas you fine-tune your Mathews SoloCam bow.

3

Owner’s Manual

LIMITED LIFETIME WARRANTYTHIS BOW IS WARRANTED AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP TO THE ORIGINAL OWNER FORTHE LIFE OF THE ORIGINAL OWNER. THIS INCLUDES ALL BOW PARTS EXCEPT THE STRING, BUSS CABLE, CABLESLIDE AND COSMETIC APPEARANCE (CHIPS, DINGS, SCRATCHES) CAUSED BY NORMAL USE AND WEAR. BOWS SENTBACK TO MATHEWS WITHOUT A PRE-ISSUED RETURN AUTHORIZATION NUMBER WILL BE REFUSED. ANY AND ALLWARRANTIES, WRITTEN OR IMPLIED, ARE VOID WITH ANY ALTERATIONS TO THE BOW.

Warranty informationEvery Mathews SoloCam bow has a LIMITED LIFETIME WARRANTY. Warranty repairs are our top priority. Each bow has a unique serial number, and warranty cards are not required to obtain warranty service. Should you ever need repairs, the Mathewsretailer from whom you purchased your bow is very knowledgeable about the bows and may be able to complete the work right intheir shop. If the bow does need to be sent to us, we assure you that we do strive to do the warranty repairs and service work and re-ship your bow within three working days from the time it arrives in our shop.

Honesty is the best policy...

Mathews bows are covered by one or more of the following patents, with other patents pending:#5,368,006, #5,676,123, #5,752,496, #5,791,322, #5,809,982, #5,890,480, #5,996,567

134

Cam Mathews Let-off Right or Left HandLegacy

SL3AR 30" 70% Right

SL3B.5R 29.5" 70% Right

SL3BR 29" 70% Right

SL3C.5R 28.5" 70% Right

SL3CR 28" 70% Right

SL3D.5R 27.5" 70% Right

SL3DR 27" 70% Right

SL3ER 26" 70% Right

SL3FR 25" 70% Right

SL3GR 24" 70% Right

SL3AL 30" 70% Left

SL3B.5L 29.5" 70% Left

SL3BL 29" 70% Left

SL3C.5L 28.5" 70% Left

SL3CL 28" 70% Left

SL3D.5L 27.5" 70% Left

SL3DL 27" 70% Left

SL3EL 26" 70% Left

SL3FL 25" 70% Left

SL3GL 24" 70% Left

StraightLine MaxCam3™

The latest generation MaxCam, the StraightLine MaxCam3 was designed specifically for the Mathews Legacy. In conjunction with String Suppressors,Harmonic Damping and Parallel Limb design, this perimeter-weighted MaxCamhelps to virtually eliminate overall recoil vibration.

The following is a breakdown of Mathews’ available cams and how each is adjusted for draw length:

About the MaxCam™ on your bowMathews invented the perimeter-weighted cam, technology that creates a flywheeleffect which lengthens and strengthens the cam’s power stroke, dramaticallyincreasing arrow speed while also reducing recoil. We call our perimeter-weightedcams "MaxCams". There are now eight different MaxCams:

Note: Our eight unique MaxCams are not compatible with any Mathews non-MaxCam model. The use of a MaxCam™ on such models will void the warranty of that bow.

12 5

Cam Icon Let-off Right or Left Hand

CSL-AR 30" 70% Right

CL-B.5R 29.5" 70% Right

CSL-BR 29" 70% Right

CSL-C.5R 28.5" 70% Right

CSL-CR 28" 70% Right

CSL-D.5R 27.5" 70% Right

CSL-DR 27" 70% Right

CSL-ER 26" 70% Right

CSL-FR 25" 70% Right

CSL-GR 24" 70% Right

CSL-AL 30" 70% Left

CSL-B.5L 29.5" 70% Left

CSL-BL 29" 70% Left

CSL-C.5L 28.5" 70% Left

CSL-CL 28" 70% Left

CSL-D.5L 27.5" 70% Left

CSL-DL 27" 70% Left

CSL-EL 26" 70% Left

CSL-FL 25" 70% Left

CSL-GL 24" 70% Left

Concentric SoloCam™In an effort to squeeze every last ounce of consistency out of the Mathews Icon, wedeveloped the Concentric Solocam, a round, perimeter-weighted cam that mirrorsthe round wheel on the opposite limb. This symmetry in shape and measurementresults in never-before achieved systematic consistency and ultimately, accuracy.

Fin or Feather™ CamThe new Fin or Feather Cam is a low let-off cam that allows you to release an arrowanywhere along the draw cycle (full draw, 3/4 draw, 1/2 draw, etc.). This perimeter-weighted cam is designed specifically for the Mathews Sportsman, a bow for thebowfisherman or upland bowhunter. With minimal let-off there is not the "bump"associated with height let-off bows as you approach full draw and no real wall.

Note: Because the Fin or Feather Cam fits everyone, there are only two cams-left or right handed- and, therefore, there is no chart.

11

Tuning your Mathews™ SoloCam® bow...TillerSetting the tiller on your Mathews SoloCam bow is easy. In fact, there’s no measur-

ing necessary. Starting from a point where both limbs are tightened completely,

simply back them off an equal number of turns.

Estimating Center ShotUsing the correct arrow size, position your arrow on the string at the nock point.

While holding the bow in front of you, visually align the bow string with the center

line of the grip. The string should run true down the center of your arrow shaft.

This is a good reference point to begin paper tuning. Note: A good starting point is

13/16" over from the riser to center of arrow shaft.

The Importance of Paper Tuning and Tear PatternsWith an improperly tuned bow, broadheads may shoot as much as 18" off center at

20 yards (when compared to field tips). By tuning a bow to shoot a good hole in

paper, you will ensure the best possible broadhead flight.

Before beginning, it’s important to know that perfect “bullet holes” are not always

possible with all shooters. Light tears are quite acceptable and will not deter accu-

racy. Fine tuning requires patience and consistent shooting form. Perfect results

are only achieved with perfect form. Also, remember to always do your final sight-

ings with broadheads before hunting.

To begin paper tuning, stand approximately eight feet from the paper (with a suit-

able backstop several feet behind the paper to allow complete arrow passage).

Check your tear pattern against the following boxes for further instruction.

If it’s a combination, such as up and to the left, both instructions will apply.

This is an example of a properly tuned bow.

Note that the point where the arrow tip went

through is centered in the middle of three very

comparable vane tears.

After the shot, push the paper back flatand you will see a star shaped entryhole where the tip went through.

Nock end went low thru here

Tip wentthru here

SOLUTION:Nock End Ripped Low1. Raise the nocking point 2. Use a heavier arrow tip 3. Use a more limber spined arrow

Note: (same for left hand)

SOLUTION:Nock End Ripped High1. Lower the nocking point 2. Use a lighter arrow tip 3. Use a more stiffer spined arrow

Note: (same for left hand)

Nock end high

Tip wentthru here

NOTE: If lowering nocking point does noteliminate problem try a different kind ofarrow rest.

Nock End Ripped RightArrow Spine Too StiffAlternatives:

1. Increase draw weight 2. Move arrow rest to the left 3. Use heavier points4. Use a lighter spined arrow

Nock end high

Tip went thru here

5. Use longer arrows if possible

(Opposite for left hand) Note: Feathers or vanes may be hittingarrow rest. Try a different arrow rest.(left hand only!)

Nock End Ripped LeftArrow Spine Too LimberAlternatives:

1. Decrease draw weight 2. Move arrow rest to the right 3. Use lighter points4. Use a stiffer spined arrow

Nock end ripped left

Tip went thru here

5. Use shorter arrows if possible6. Vanes or feathers may be striking

arrow rest. Try a different arrow rest.

Note: (Opposite for left hand)

6

StraightLine MaxCam™

The StraightLine MaxCam™ is available on the MQ1 and MQ-32". It deliversstraight nock point travel along with the speed and recoil reduction that is charac-teristic of all perimeter-weighted MaxCams. The cam is factory set at its optimumperformance level and is available in 70% or 80% let-off. Note: The 70%-let-off and 80%-let-off StraightLine MaxCams each require different string and cable lengths. Several draw lengths are available to accommodate most archers.

Draw Length 80% Let-off 70% Let-off 80% Let-off 70% Let-off

30" SLARHL SLAR SLALHL SLAL

29.5" SLB.5RHL SLB.5R SLB.5LHL SLB.5L

29" SLBRHL SLBR SLBLHL SLBL

28.5" SLC.5RHL SLC.5R SLC.5LHL SLC.5L

28" SLCRHL SLCR SLCLHL SLCL

27.5" SLD.5RHL SLD.5R SLD.5LHL SLD.5L

27" SLDRHL SLDR SLDLHL SLDL

26" SLERHL SLER SLELHL SLEL

25" SLFRHL SLFR SLFLHL SLFL

24" SLGRHL SLGR SLGLHL SLGL

RIGHT HAND LEFT HAND

Draw Lengths with 70% Let-off Right Hand Left HandSQ2/Q2 Q2XL

30" 31" SL2AR SL2AL

29.5" 30.5" SL2B.5R SL2B.5L

29" 30" SL2BR SL2BL

28.5" 29.5" SL2C.5R SL2C.5L

28" 29" SL2CR SL2CL

27.5" 28.5" SL2D.5R SL2D.5L

27" 28" SL2DR SL2DL

26.5" 27.5" SL2E.5R SL2E.5L

26" 27" SL2ER SL2EL

25" 26" SL2FR SL2FL

24" 25" SL2GR SL2GL

23" 24" SL2HR SL2HL

StraightLine MaxCam2™

We designed this cam exclusively for the SQ2, Q2 and Q2XL. It works in conjunction with Mathews’ revolutionary Harmonic Damping System™ to reducerecoil vibration. Like the StraightLine MaxCam™, this perimeter-weighted camgives you straight nock point travel, smooth shooting and great speed. Available inseveral draw length options.

Arrow selection...Determining Proper Arrow LengthThe first step in selecting your arrows is to determine your arrow length. This isdetermined by several factors, including arm length and full-draw anchor position. If you are using an overdraw, you can mark the arrow just in front of the rest. Thedistance from your mark to the string groove in the arrow nock will be your correctarrow length. Your Mathews retailer can be an invaluable help in this process.

Using the Easton Shaft Selection Chart (see pages 12 & 13)After you’ve determined your arrow length, find its corresponding measure in thelength column. Move down this column until you reach the correct draw weight ofyour bow. The correct spine for your arrow is found where your draw length andweight intersect. Use the “hard cam” category on the chart for a Mathews SoloCam bow.

10

The Original MaxCam™

The revolutionary perimeter-weighted cam that started it all, the Original MaxCam is available on the Conquest 2, FX, Ultra 2, and Black Max. It generates incredi-ble arrow speed while also remarkably reducing recoil, thanks to perimeter-weight-ing. The Original MaxCam™ is available with 65% and 80% let-off.

Cam Conquest 2 FX Ultra 2 Let-off (%) RH or LHZ-AAR-HL 32" 31" 30" 80 RHZ-BBR-HL 31" 30" 29" 80 RHZ-CCR-HL 30" 29" 28" 80 RHZ-DDR-HL 29" 28" 27" 80 RHZ-EER-HL 28" 27" 26" 80 RHZ-AAL-HL 32" 31" 30" 80 LHZ-BBL-HL 31" 30" 29" 80 LHZ-CCL-HL 30" 29" 28" 80 LHZ-DDL-HL 29" 28" 27" 80 LHZ-EEL-HL 28" 27" 26" 80 LH

Z-AAR 32" 31" 30" 65 RHZ-BBR 31" 30" 29" 65 RHZ-CCR 30" 29" 28" 65 RHZ-DDR 29" 28" 27" 65 RHZ-EER 28" 27" 26" 65 RHZ-AAL 32" 31" 30" 65 LHZ-BBL 31" 30" 29" 65 LHZ-CCL 30" 29" 28" 65 LHZ-DDL 29" 28" 27" 65 LHZ-EEL 28" 27" 26" 65 LH

String and cable lengths for each Mathews bowThe Zebra ZS Twist bowstring is standard on all Mathews bows. It combines bundles of low-stretch, multifilament strands counter-twisted to form a perfectlybalanced bowstring that does not rotate as the bow is drawn. Your peep comes toperfect position every time – without the need for rubber tubing and other alignment devices. Plus, peep installation is easier than ever. Following is a list ofthe string and cable lengths required for each Mathews model:

Model String Length Cable Length

Legacy 913/4" 361/4"Icon 967/8" 397/16"Sportsman 901/16" 37"SQ2 841/2" 3311/16"SQ2 (291/2" OR 30" draw) 855/8" 333/4"Ultra 2 931/8" 387/8"Ultra 2 (Mini Max) 88" 377/8"Conquest 2 1033/4" 44"Conquest 2 (Mini Max) 987/16" 43"Q2 901/4" 361/2"Q2 (291/2", 30" draw) 915/16" 365/8"Q2XL 973/4" 403/16"Q2XL (301/2" or 31" draw) 991/8" 401/2"FX 901/16" 371/4"FX (Mini Max) 833/4" 357/8"MQ-32" (70%) 851/2" 34"MQ-32" (80%) 881/8" 337/8"MQ1 (70%) 951/16" 385/8"MQ1 (80%) 975/8" 381/2"Rival Pro 971/4" 421/2"Black Max 931/8" 385/8"

Mini MaxCam™

Now shorter-draw-length shooters can get all the advantages of perimeter weighting. Available on Mathews FX, Ultra 2, Rival Pro and Conquest 2 models,this cam accommodates draw lengths as short as 22" with peak draw weights downto 35 pounds. The Mini MaxCam™ is available only with 65% let-off and has approximately a 1/2" adjustment range.

Note: The Mini MaxCam requires a different idler wheel and string/cable lengths.

Cam Ultra 2 FX Rival Pro Conquest 2 Let-off (%) RH or LH

MINIMAX-DDR 27" 28" 30" 29" 65 RHMINIMAX-EER 26" 27" 29" 28" 65 RHMINIMAX-FFR 25" 26" 28" 27" 65 RHMINIMAX-GGR 24" 25" 27" 26" 65 RHMINIMAX-HHR 23" 24" 26" 25" 65 RHMINIMAX-IIR 22" 23" 25" 24" 65 RHMINIMAX-DDL 27" 28" 30" 29" 65 LHMINIMAX-EEL 26" 27" 29" 28" 65 LHMINIMAX-FFL 25" 26" 28" 27" 65 LHMINIMAX-GGL 24" 25" 27" 26" 65 LHMINIMAX-HHL 23" 24" 26" 25" 65 LHMINIMAX-IIL 22" 23" 25" 24" 65 LH

7

8 9

2002 Bow Specifications Chart

All Mathews bows come with a weight adjustment range of 10 lbs. (down). All have standard burger button, sight, and stabilizerholes. The cable slider on each model is a special nonsqueak Teflon® composite. The limbs are SlimlineTM laminated and come withan original owner lifetime warranty. The machined aluminum limb cups totally contain the limb butts and pivot with the limbs, so nomatter what the draw weight, the limbs are always firmly contained within the cup. High inertia limb cups are also available at anadditional charge.

*Features Harmonic Damping System™

Model IBO AMO Cam(s) Draw Draw Axle- Brace Riser Physical Let-Rating Rating Length Weight to-Axle Height Length Weight off (FPS) (FPS) Length (Approx.) (Approx.) (%) (Approx.) (Approx.) (Approx.)

Mathews 308 235 StraightLine 24 - 30 40 - 70 34" 71/2" 25" 4.35 lbs. 70Legacy* MaxCam3 Half-Sizes

27.5 - 29.5

Icon* 300 230 Concentric 24 - 30 40 - 70 37" 75/8" 25" 4.45 lbs. 70SoloCam Half-Sizes

27.5 - 29.5

Sportsman Adequate Adequate Fin or Feather 20 - 32 40 - 70 34" 71/2" 163/8" 3.3 lbs. —Cam

SQ2* 305 230 StraightLine 23 - 30 40 - 70 31" 81/2" 1913/16" 3.7 lbs. 70MaxCam2™ Half-Sizes

26.5 - 29.5

Ultra 2* 320+ 245 MaxCam 26 - 30 40 - 70 36" 61/8" 175/8" 3.7 lbs. 65 or 80Mini MaxCam 22 - 27 65

Conquest 2* 310 236 MaxCam 28 - 32 40 - 70 41" 7" 271/8" 4.4 lbs. 65 or 80Mini MaxCam 24 - 29 65Super Soft 28 - 32 60

Q2* 308 235 StraightLine 23 - 30 40 - 70 34" 71/2" 23" 4 lbs. 70MaxCam2™ Half-Sizes

26.5 - 29.5

Q2XL* 308 235 StraightLine 24 - 31 40 - 70 38" 71/2" 27" 4.3 lbs. 70MaxCam2™ Half-Sizes

27.5 - 30.5

FX 308 235 MaxCam 27 - 31 40 - 70 34" 71/2" 163/8" 3.3 lbs. 65 or 80Mini MaxCam 23 - 28 65

MQ-32" 303 228 StraightLine 24 - 30 40 - 70 32" 81/2" 175/8" 3.25 lbs. 70MaxCam Half-Sizes 27.5 - 29.5 80

Rival Pro 308 232 Mini MaxCam 25 - 30 40 - 70 40" 8" 271/8" 3.9 lbs. 65

MQ1 308 235 StraightLine 24 - 30 40 - 70 37" 71/2" 23" 3.75 lbs. 70MaxCam Half-Sizes 27.5 - 29.5 80

Black Max 330 252 Black 25 - 30 40 - 70 36" 51/2" 1713/16" 3.5 lbs. 65MaxCam

Cam Conquest 2 Ultra 2 FX Let-off (%) RH or LH

SS-AR 32" 30" 31" 60 RHSS-BR 31" 29" 30" 60 RHSS-CR 30" 28" 29" 60 RHSS-DR 29" 27" 28" 60 RHSS-ER 28" 26" 27" 60 RHSS-AL 32" 30" 31" 60 LHSS-BL 31" 29" 30" 60 LHSS-CL 30" 28" 29" 60 LHSS-DL 29" 27" 28" 60 LHSS-EL 28" 26" 27" 60 LH

Super-Soft Cam™

The Super-Soft Cam™, designed especially for finger shooters, provides an extremely smooth draw and a release that rolls from the fingertips. This specialMaxCam™ is available on the Conquest 2, Ultra 2 and FX and only with 60% let-off.

Black MaxCam™

The Black MaxCam™, available only on the Black Max, delivers maximum speed with minimum kick. Like our other cams, the Black MaxCam™ is set to its optimumperformance level. Several draw lengths are available to accommodate mostarchers. The Black MaxCam™ is available only in 65% let-off.

Cam Draw Length Let-off (%) RH or LH

BMX-30R 30" 65 RH

BMX-29R 29" 65 RH

BMX-28R 28" 65 RH

BMX-27R 27" 65 RH

BMX-26R 26" 65 RH

BMX-25R 25" 65 RH

BMX-30L 30" 65 LH

BMX-29L 29" 65 LH

BMX-28L 28" 65 LH

BMX-27L 27" 65 LH

BMX-26L 26" 65 LH

BMX-25L 25" 65 LH