2010 college of engineering & computer science publications books

57
1 2010 College of Engineering & Computer Science Publications Books Chang, N.B., The Effects of Urbanization on Groundwater: An Engineering Case based Approach for Sustainable Development, ASCE/EWRI: VA, 2010, 395 pages. Chang, N.B., Systems Analysis for Sustainable Engineering, McGraw Hill: NY, 2010, 688 pages. Chew, L. Elementary School Inquiry Discussion Templates For White Boarding, Mira Digital Publishing: MO, 2010, 30 pages. Chew, L., Inquiry in the Classroom, Mira Digital Publishing: MO, 2010, 76 pages. Chew, L., Middle School Inquiry Discussion Templates for White boarding, Mira Digital Publishing: MO, 2010, 31 pages. Dechev, D., A Concurrency and Time Centered Framework for Autonomous Space System, LAP LAMBERT Academic Publishing:Germany, 2010, 180 pages. Guchi, M. and O.J. Ilegbusi, Modeling Multiphase Materials Processes: Gas –Liquid Systems, Springer: New York:NY, 2010, 413 pages. Guha, A. and A. Orooji, C Knights: An Introduction to Programming in C, Pearson Learning Solutions, Boston:MA, 2010, 440 pages. Hachet, M., K. Kiyokawa and J. LaViola, IEEE Symposium on 3D User Interfaces 2010, IEEE Press, March 2010, 147 pages. Hagen, S.C. & L.E. Thomas, UCF EXCEL Applications of Calculus II, Spring 2010, UCF: FL, 2010, 79 pages. Karwowski, W. and G. Salvendy, Advances in Human Factors, Ergonomics, and Safety in Manufacturing and Service Industries, CRC Press:London, 2010, 1250 pages. Marek, T., W. Karwowski and V. Rice, Advances in Understanding Human Performance: Neuroergonomics, Human Factors Design, and Special Populations, CRC Press:London, 2010, 910 pages. Reinhard E., G. Ward, S.N. Pattanaik, P. Debevec, W. Heidrich and K. Myszkowski, High Dynamic Range Imaging: Acquisition, Display and Image-Based Lighting, 2 nd Edition, Elsevier:MA, 2010, 672 pages.

Upload: others

Post on 12-Sep-2021

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 2010 College of Engineering & Computer Science Publications Books

       

1

2010 College of Engineering & Computer Science Publications

Books Chang, N.B., The Effects of Urbanization on Groundwater: An Engineering Case based Approach for Sustainable Development, ASCE/EWRI: VA, 2010, 395 pages. Chang, N.B., Systems Analysis for Sustainable Engineering, McGraw Hill: NY, 2010, 688 pages. Chew, L. Elementary School Inquiry Discussion Templates For White Boarding, Mira Digital Publishing: MO, 2010, 30 pages. Chew, L., Inquiry in the Classroom, Mira Digital Publishing: MO, 2010, 76 pages. Chew, L., Middle School Inquiry Discussion Templates for White boarding, Mira Digital Publishing: MO, 2010, 31 pages. Dechev, D., A Concurrency and Time Centered Framework for Autonomous Space System, LAP LAMBERT Academic Publishing:Germany, 2010, 180 pages. Guchi, M. and O.J. Ilegbusi, Modeling Multiphase Materials Processes: Gas –Liquid Systems, Springer: New York:NY, 2010, 413 pages. Guha, A. and A. Orooji, C Knights: An Introduction to Programming in C, Pearson Learning Solutions, Boston:MA, 2010, 440 pages. Hachet, M., K. Kiyokawa and J. LaViola, IEEE Symposium on 3D User Interfaces 2010, IEEE Press, March 2010, 147 pages. Hagen, S.C. & L.E. Thomas, UCF EXCEL Applications of Calculus II, Spring 2010, UCF: FL, 2010, 79 pages. Karwowski, W. and G. Salvendy, Advances in Human Factors, Ergonomics, and Safety in Manufacturing and Service Industries, CRC Press:London, 2010, 1250 pages. Marek, T., W. Karwowski and V. Rice, Advances in Understanding Human Performance: Neuroergonomics, Human Factors Design, and Special Populations, CRC Press:London, 2010, 910 pages. Reinhard E., G. Ward, S.N. Pattanaik, P. Debevec, W. Heidrich and K. Myszkowski, High Dynamic Range Imaging: Acquisition, Display and Image-Based Lighting, 2nd Edition, Elsevier:MA, 2010, 672 pages.

Page 2: 2010 College of Engineering & Computer Science Publications Books

       

2

Salvendy, G. and W. Karwowski, Introduction to Service Engineering, John Wiley & Sons:NY, 2010, 672 pages. Townley, D., F. Sever, P. Oram, W. Lovins, A. Romer, S.J. Duranceau and G.E.C. Bell, Global Review of Spray On Structural Lining Technologies, Water Research Foundation and U.S. Environmental Protection Agency: CO, 2010, 157 pages. Book Chapters Butler, C., R. Jones and P. McCauley-Bush, Future Challenges of Mobile Learning in Web-based Instruction, in: Russell D. and A. Haghi (Eds). Web-Based Engineering Education: Critical Design and Effective Tools. Engineering Science Reference, IGI Global Publishers, Hershey:PA, 2010, pp. 63-76. Chang, N.B., The Frontiers of Sustainable Development in Urban Regions, in: N.B. Chang (Ed). The Effects of Urbanization on Groundwater: An Engineering Case-based Approach for Sustainable Development. ASCE/EWRI, Reston:VA, 2010, pp. 1-5. Chang, N.B., M. Wanielista, M. Moberg, F. Hossain and A. Daranpob, Use of Functionalized Filter Medium for Nutrient Removal in Stormwater Ponds, in: N.B. Chang (Ed). The Effects of Urbanization on Groundwater: An Engineering Case-based Approach for Sustainable Development. ASCE/EWRI, Reston: VA, 2010, pp. 199-223. Chang, N.B., M. Wanielista, A. Daranpob, F. Hossain and Z. Xuan, Comparative Assessment of Two Standard Septic Tank Drain Fields using Different Sand with Recirculation for Nutrient Removal, in: N.B. Chang (Ed). The Effects of Urbanization on Groundwater: An Engineering Case-based Approach for Sustainable Development. ASCE/EWRI, Reston:VA, 2010, pp. 224-250. Chiang, C.F. and P. Wocjan, Quantum Algorithms for Preparing Thermal Gibbs States, in R. Horodecki, S. Kilin and J. Kowalik (Eds). Quantum Cryptography and Computing. IOS Press, Lansdale:PA, 2010, pp. 138-147. Duranceau, S.J and J.S Taylor, Membrane Processes, in: J.K. Edzwald (Ed). Water Quality and Treatment, 6th Edition. McGraw-Hill, New York: NY, 2010, pp. 11-1 to 11-106. Fang, X., N.B. Chang, M.K. Lee and L.W. Wolf, Environmental Assessment of using Stone Quarries as Part of an Integrative Water Supply System in Fast Growing Urban Regions, in: N. B. Chang (Ed). The Effects of Urbanization on Groundwater: An Engineering Case-based Approach for Sustainable Development. ASCE/EWRI, Reston:VA, 2010, pp. 26-46. Gao, W., Z. Gao and N.B. Chang, Comparative Analysis of UVB between Nimbus 7/TOMS Satellite Estimates and Ground-based Measurements, in: W. Gao, D. L. Schmoldt and J. R. Slusser (Eds). UV Radiation in Global Change: Measurements, Modeling and Effects on Ecosystems. Springer, New York:NY, 2010, pp. 270-289. Gou, J. and Y. Tang, Fire Retardant Properties of Polymer Nanocomposites, in: J.S. Leng and K.T. Lau (Eds). Multifunctional Polymer Nanocomposites. CRC Press, Boca Raton:FL, 2010, pp. 309-336.

Page 3: 2010 College of Engineering & Computer Science Publications Books

       

3

Hu, H. and X. Li, Transcription Factor Binding Site Identification by Phylogenetic Footprinting, in J. Feng, W. Fu and F. Sun (Eds). Frontiers in Computational and Systems Biology. Springer, New York:NY, 2010, pp.113-132. Karwowski, W., G. Salvendy and T. Ahram, A Human-Centered Approach to Design and Modeling of Service Systems, in: G. Salvendy and W. Karwowski (Eds). Introduction to Service Engineering. John Wiley & Sons, New York:NY, 2010, pp. 179-206. Kassab, A. and E. Divo, Application of the Boundary Element Method to Non Homogeneous Media: Heat Conduction and Thermoelasticity, in: E.J. Sapountzaki (Ed.). Recent Developments in the Boundary Element Method, WIT Press, Southampton:UK, 2010, pp. 87-102. Kotnour, T., Strategic Management, in: D. Merion and J. Farr (Eds). The Engineering Management Handbook (First Edition). American Society of Engineering Management, Rolla:MO, 2010, pp. 1-14. Kotnour, T. and J. Farr, Engineering Management: Past, Present, Future, in: D. Merion and J. Farr (Eds). The Engineering Management Handbook (First Edition), American Society of Engineering Management, Rolla:MO, 2010, pp. 337-244. LaViola, J., Mathematical Sketching: An Approach to Making Dynamic Illustrations, in: J. Jorge and F. Samavati (Eds). Sketchbased Interfaces and Modeling. Springer-Verlag, London:UK, 2010, pp. 81-118. Liu, J., C. Xu and M. Jackson, Traditional and Non-traditional Control Techniques for Grinding Processes, in: M. Jackson and J.P. Davim (Eds). Machining with Abrasive, Springer, New York:NY, 2010, pp. 269-302. Megic, B. and N.B. Chang, Use of a Wetland System for Groundwater Recharge in an Urban Wastewater Treatment Plan in Orlando, Florida, in: N. B. Chang (Ed). The Effects of Urbanization on Groundwater: An Engineering Case-based Approach for Sustainable Development. ASCE/EWRI, Reston:VA, 2010, pp. 277-306. Venkataraman, M., M. Chatterjee and K. Kwiat, Dynamic Routing Framework for Wireless Sensor Networks, in: W. Seah and Y.K. Tan (Eds). Sustainable Wireless Sensor Networks. INTECH Publishers, Rijeka:Croatia, 2010, pp. 253-277. Wang, P., B. Aslam and C.C. Zou, Peer-to-Peer Botnets: The Next Generation of Botnet Attacks, in: P. Stavroulakis and M. Stamp (Eds). Handbook of Information and Communication Security. Springer Press, New York:NY, 2010, pp. 335-350.

Page 4: 2010 College of Engineering & Computer Science Publications Books

       

4

Refereed Journal Publications Civil, Environmental and Construction Engineering (CECE)

Abdel-Aty M. and V. Gayah, “Real-time Crash Risk Reduction on Freeways Using Coordinated and Uncoordinated Ramp Metering Approaches,” ASCE Journal of Transportation Engineering, Vol. 136, No. 5, 2010, pp. 410-423. Abdel-Aty M., A. Pande and L. Hsia, “The Concept of Proactive Traffic Management for Enhancing Freeway Safety and Operation,” Institute of Transportation Engineers Journal, Vol. 80, No. 4, 2010, pp. 34-41. Almonte A. and M. Abdel-Aty, “Exploring the Level-of-Service & Traffic Safety Relationship at Signalized Intersections,” Institute of Transportation Engineers Journal, Vol. 80, No. 6, 2010, pp. 18-24.

Behzadan A.H. and V.R. Kamat, “Scalable Algorithm for Resolving Incorrect Occlusion in Dynamic Augmented Reality Engineering Environments,” Journal of Computer-Aided Civil and Infrastructure Engineering, Vol. 25, No.1, 2010, pp. 3-19. Butler, B, A. Kassab, M. Chopra and V. Desai, “Boundary Element Model of Electrochemical Dissolution with Geometric Nonlinearities,” Engineering Analysis with Boundary Elements, Vol. 34, 2010, pp. 714-720. Chang, N. B., Z. Xuan, A. Daranpob and M. Wanielista, “A Subsurface Upflow Wetland System for Nutrient and Pathogen Removal in On-site Sewage Treatment and Disposal Systems,” Environmental Engineering Science, Vol. 27, No. 9, 2010, pp. 707-720. Chang, N.B. and A. Makkeasorn, “Optimal Site Selection of Watershed Hydrological Monitoring Stations using Remote Sensing and Grey Integer Programming,” Environmental Modeling and Assessment, Vol. 15, No. 6, 2010, pp. 469-486.

Chang, N.B. and D.Q. Chang, “Long-term Risk Assessment of Possible Accidental Release of Nuclear Power Plants in Complex Terrains with respect to Synoptic Weather Patterns,” Frontiers of Earth Science in China, Vol. 4, No. 2, 2010, pp. 205-228. Chang, N.B., “Hydrological Connections between Low Impact Development, Watershed Best Management Practices and Sustainable Development,” Journal of Hydrologic Engineering, Vol. 15, No. 5, 2010, pp. 1-2. Chang, N.B., F. Hossain and M. Wanielista, “Use of Filter Media for Nutrient Removal in Natural Systems and Built Environments (I): Previous Trends and Perspectives,” Environmental Engineering Science, Vol. 27, No. 9, 2010, pp. 689-706.

Chang, N.B., H.W. Chen, S.K. Ning, K.T. Shao and T.C. Hung, “Sizing an Off-stream Reservoir with Respect to Water Availability, Water Quality, and Biological Integrity,” Environmental Modeling and Assessment, Vol. 15, No. 5, 2010, pp. 329-344.

Page 5: 2010 College of Engineering & Computer Science Publications Books

       

5

Chang, N.B., J. Yang and A. Daranpob, “Medium-term Metropolitan Water Availability Index (MWAI) Assessment based on Synergistic Potentials of Multi-sensor Data,” Journal of Applied Remote Sensing, Vol. 4, 2010, pp. 043519.

Chang, N.B., M. Han, W. Yao, S.G. Xu and L.C. Chen, “Change Detection of Land Use and Land Cover in a Fast Growing Urban Region with SPOT-5 Images and Partial Lanczos Extreme Learning Machine,” Journal of Applied Remote Sensing, Vol. 4, 2010, pp. 043551. Chang, N.B., M. Wanielista and A. Makkeasorn, “Use of Filter Media for Nutrient Removal in Natural Systems and Built Environments (II): Design Challenges and Application Potentials,” Environmental Engineering Science, Vol. 27, No. 9, 2010, pp. 707-720. Chang, N.B., M. Wanielista and D. Henderson, “Temperature Effects on Functionalized Filter Media for Nutrient Removal in Stormwater Treatment,” Environmental Progress and Sustainable Energy, 2010, Online.

Chang, N.B., M. Wanielista, A. Daranpob, F. Hossian and Z. Xuan, “A New Performance-based Passive Septic Tank Underground Drainfield for Nutrient and Pathogen Removal using Sorption Medium,” Environmental Engineering Science, Vol. 27, No. 6, 2010, pp. 469-482.

Chang, N.B., R. Feng, Z. Gao and W. Gao, “Skin Cancer Incidence is Highly Associated with Ultraviolet-B Radiation History,” International Journal of Hygiene and Environmental Health, Vol. 213, 2010, pp. 359-368.

Chang, N.B., Y. Yang, J.A. Goodrich and A. Makkeasorn, “Development of the Metropolitan Water Availability Index (MWAI) and Short-term Assessment with Multi-scale Remote Sensing Technologies,” Journal of Environmental Management, Vol. 91, 2010, pp. 1397-1413.

Chen, H.W. and N.B. Chang. “Using Fuzzy Operators to Address the Complexity in Decision Making of Water Resources Redistribution in two Neighboring River Basins,” Advances in Water Resources, Vol. 33, 2010, pp. 652–666. Chen, H.W., J.C. Chen and N.B. Chang, “Environmental Performance Evaluation of Large-scale Municipal Incinerators using Data Envelopment Analysis (DEA),” Waste Management, Vol. 30, 2010, pp. 1371–1381. Chopra, M, S. Kakuturu, C. Ballock, J. Spence and M. Wanielista, “Determination of the Infiltration Rates and the Effect of Rejuvenation Methods for Pervious Concrete Pavements,” Journal of Hydrologic Engineering, Vol. 15, No. 6, 2010, pp. 426-433.

Chopra, M., S.C. Hagen and L.N. Reddi, “Hydro-Environmental Education at the University of Central Florida,” Florida Watershed Journal, Vol. 3, No. 1, 2010, pp. 4-8. Cooper, C.D., “Carbon Dioxide Control – Technology for the Future,” Journal of Environmental Science and Engineering, Vol. 4, No. 11, 2010, pp. 1-16.

Das A. and M. Abdel-Aty, “A Genetic Programming Approach to Explore the Crash Severity on Multi Lane Roads,” Accident Analysis & Prevention, Vol. 42, No. 2, 2010, pp. 548-557.

Page 6: 2010 College of Engineering & Computer Science Publications Books

       

6

Das A., M. Abdel-Aty and A. Pande, “Using Genetic Programming to Investigate the Design Parameters Contributing to Crash occurrence on Urban Arterials,” Journal of the Transportation Research Board, Vol. 1, No. 2147, 2010, pp. 25-32. Duranceau, S.J., “Determination of Total Iodide in Seawater Permeate,” Desalination, Vol. 261, 2010, pp. 251-254.

Duranceau, S.J., W.J. Johnson and R.J. Pfeiffer-Wilder, “Test Method for Studying the Effects of Stray Current on the Integrity of Continuous & Discontinuous Rebar,” Society for Experimental Mechanics, Experimental Techniques, 2010, Online only. Gao, Z., W. Gao and N.B. Chang, “Comparative Analyses of Ultraviolet-B Flux over the Continental United States based on the NASA Total Ozone Mapping Spectrometer Data and the USDA Ground-based Measurements,” Journal of Applied Remote Sensing, Vol. 4, 2010, pp. 043547.

Gao, Z., W. Gao and N.B. Chang, “Detection of Multidecadal Changes in UVB and Total Ozone Concentrations over the Continental US with NASA TOMS Data and USDA Ground-based Measurements,” Remote Sensing, Vol. 2, No. 1, 2010, pp. 262-277.

Guo F., X. Wang and M. Abdel-Aty, “Modeling Signalized Intersection Safety with Corridor Level Spatial Correlations,” Accident Analysis & Prevention, Vol. 42, No. 1, 2010, pp. 84-92. Haleem K. and M. Abdel-Aty, “Examining Traffic Crash Injury Severity at Unsignalized Intersections,” Journal of Safety Research, Vol. 41, No. 4, 2010, pp. 347-357. Haleem K. and M. Abdel-Aty, “Multiple Applications of the Multivariate Adaptive Regression Splines Technique in Predicting Rear-end Crashes at Unsignalized Intersections,” Journal of the Transportation Research Board, No. 2165, 2010, pp. 33-41. Haleem K., M. Abdel-Aty and K. Mackie, “Using a Reliability Process to Reduce Uncertainty in Predicting Crashes at Unsignalized Intersections,” Accident Analysis & Prevention, Vol. 42, No. 2, 2010, pp. 654-666.

Harb, R., E, Radwan and K. Shaaban, “Two Simplified Dynamic Lane Merging Systems (SDLMS) for Three-to-Two Short Term Work Zone Lane Closure Configuration,” Florida Section of the Institute of Transportation Engineers, 2010, pp. 20-24. Harb, R., S. Xiaogang, E. Radwan and C. Russo, “Empirical Analysis of Toll-Lane Processing Times using Proportional Odds Augmented Mulativariate Adative Regression Splines,” ASCE Journal of Transportation Engineering, Vol. 136, No. 11, 2010, pp. 1039-1048. Harb, R., X. Su, E. Radwan and C. Russo, “Empirical Analysis of Toll-Lane Processing Times using Proportional Odds Augmented Mulativariate Adative Regression Splines,” ASCE Journal of Transportation Engineering, Vol. 136, No. 11, 2010, pp. 1039-1048. Hossain, F., N.B. Chang and M. Wanielista, “Modeling Kinetics and Isotherm of Functionalized Filter Medium for Nutrient Removal in Stormwater Dry Ponds,” Environmental Progress and Sustainable Energy, Vol. 29, No. 3, 2010, pp. 319-333.

Huang H. and M. Abdel-Aty, “Multilevel Data in Traffic Safety: a Five-level Hierarchical Spatiotemporal Model,” Accident Analysis & Prevention, Vol. 42, No. 6, 2010, pp. 1556-1565.

Page 7: 2010 College of Engineering & Computer Science Publications Books

       

7

Huang H., M. Abdel-Aty and A. Darwiche, “County-level Crash Risk Analysis in Florida: Bayesian Spatial Modeling,” Journal of the Transportation Research Board, Vol. 2, No. 2148, 2010, pp. 27-37.

Lintereur, P.A., S.J. Duranceau and J.S. Taylor, “Sodium Silicate Impacts on Lead Release in a Blended Potable Water Distribution System,” Desalination and Water Treatment, Vol. 16, 2010, pp. 427-438.

Ma, M., X. Yan, H. Huang and M. Abdel-Aty, “Occupational Driver Safety of Public Transportation: Risk Perception, Attitude and Driving Behavior,” Journal of the Transportation Research Board, Vol. 3, No. 2145, 2010, pp. 72-79. Ma, M., X. Yan, M. Abdel-Aty, H. Huang and X. Wang, “Analysis of Urban Arterial Safety in Developing Countries: Case of China,” Journal of the Transportation Research Board, No. 2193, 2010, pp. 105-115. Pande A., M. Abdel-Aty and A. Das, “A Classification Tree Based Modeling Approach for Segment Related Crashes on Multilane Highways,” Journal of Safety Research, Vol. 41, No. 5, 2010, pp. 391-397. Pires, A., G. Martinho and N.B. Chang, “Solid Waste Management in European Countries: A Review of Systems Analysis Techniques,” Journal of Environmental Management, 2010, Online.

Russo, C., R. Harb and E. Radwan, “Calibration and Verification of SHAKER A Deterministic Toll Plaza Simulation Model,” ASCE Journal of Transportation Engineering, Vol. 136, No. 2, 2010, pp. 85-92. Ryan, P., M. Wanielista and N.B. Chang, “Reducing Nutrient Concentrations from a Stormwater Wet Pond using a Chamber Upflow Filter and Skimmer (CUFS) with Green Sorption Media,” Water, Air and Soil Pollution, Vol. 208, No. 1, 2010, pp. 385-400.

Serag, E., A. Oloufa, L. Malone and E. Radwan, “A Model for Quantifying the Impact of Change Orders on Project Cost for US Roadwork Construction,” ASCE's Journal of Construction Engineering and Management, Vol. 136, No. 9, 2010, pp. 1015-1027. Serag, E., A. Oloufa, L. Malone and E. Radwan, “Model for Quantifying the Impact of Change Orders on Project Cost for U.S. Roadwork Construction,” ASCE Journal of Construction Engineering and Management, Vol. 136. No. 9, 2010, pp. 1015-1027. Shmerling, R.Z. and F.N. Catbas, “Visualization, Finite Element Modeling and Analysis of Aerial Guideways,” Structure and Infrastructure Engineering Journal, Vol. 6, No. 4, 2010, pp. 447-465.

Stone, E.D., S.J. Duranceau, P. Lintereur and J.S. Taylor, “Effects of Orthophosphate Corrosion Inhibitor on Lead in Blended Water Quality Environments,” Desalination & Water Treatment, Vol. 13, 2010, pp. 348-35.

Sun, Z., N.B. Chang and C. Opp, “Using SPOT-VGT NDVI as Successive Ecological Indicators of for Understanding the Environmental Implications in the Tarim River Basin, China,” Journal of Applied Remote Sensing, Vol. 4, 2010, pp. 043554.

Page 8: 2010 College of Engineering & Computer Science Publications Books

       

8

Sun, Z., N.B. Chang, C. Opp and T. Hennig, “Evaluation of Ecological Restoration through Vegetation Patterns in the Lower Tarim River, China with MODIS NDVI Data,” Ecological Informatics, 2010, Online.

Wang, D. and X. Cai, “Comparative Study of Climate and Human Impacts on Seasonal Base Flow in Urban and Agricultural Watersheds,” Geophysical Research Letters, Vol. 37, 2010, Online. Wang, D. and X. Cai, “Recession Slope Curve Analysis under Human Interferences,” Advances in Water Resources, Vol. 33, No. 9, 2010, pp. 1053-1061. Xie, H., N.B. Chang, A. Makkeasorn and D. Prado, “Assessing the Long-term Urban Heat Island in San Antonio, Texas based on MODIS/Aqua Data,” Journal of Applied Remote Sensing, Vol. 4, 2010, pp. 043508. Xuan, Z., N.B. Chang, A. Daranpob and M. Wanielista, “Modeling the Subsurface Upflow Wetland (SUW) System for Wastewater Effluent Treatment,” Environmental Engineering Science, Vol. 27, No. 10, 2010, pp. 879-888. Xuan, Z., N.B. Chang, M. Wanielista and F. Hossain, “Laboratory-scale Characterization of the Green Sorption Medium for Wastewater Treatment to Improve Nutrient Removal,” Environmental Engineering Science, Vol. 27, No. 4, 2010, pp. 301-312. Zaurin, R. and F.N. Catbas, “Integration of Computer Imaging and Sensor Data for Structural Health Monitoring of Bridges,” Journal of Smart Materials & Structures, Vol. 19, No. 1, 2010.

Zhang, H., M. Ziv-El, B.E. Rittmann and R. Krajmalnik-Brown, “Effect of Dechlorination and Sulfate Reduction on the Microbial Community Structure in Denitrifying Membrane-Biofilm Reactors,” Environmental Science and Technology, Vol. 44, No. 13, 2010, pp. 5159-5164.

Computer Science (CS)

Ali, S. and M. Shah, “Human Action Recognition in Videos Using Kinematic Features and Multiple Instance Learning,” IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. 32, No. 2, 2010, pp. 288-303. Anderson, C.J.R., N. Da Vitoria Lobo, J.D. Roth and J.M. Waterman, “Computer-aided Photo-identification System with an Application to Polar Bears based on Whisker Spot Patterns,” Journal of Mammology, Vol. 91, No. 6, 2010, pp. 1350-1359.

Aslam, B., S. Park, C.C. Zou and D. Turgut, “Secure Traffic Data Propagation in Vehicular Ad-hoc Networks,” International Journal of Ad Hoc and Ubiquitous Computing, Vol. 6, No. 1, 2010, pp. 24-39. Bernabei, D., F. Ganovelli, N. Pietroni, P. Cignoni, S. N. Pattanaik and R. Scopigno, "Real-time Single Scattering Inside Inhomogeneous Materials," The Visual Computer Journal, Vol. 26, No. 608, 2010, pp. 583-593. Boulanger, K., K. Bouatouch and S.N. Pattanaik, “High-Frequency Shadows for Real-Time Rendering of Trees,” Journal of Graphics, Gpu and Game Tools, Vol. 25, No. 1, 2010, pp. 1-12.

Page 9: 2010 College of Engineering & Computer Science Publications Books

       

9

Cai, X., L. Hou, N. Su, H. Hu, M. Deng and X. Li, “Systematic Identification of Conserved Motif Modules in the Human Genome,” BMC Genomics, Vol. 11, 2010, pp. 567.

Campbell, A. and A. Wu, “Multi-agent Role Allocation: Issues, Approaches and Multiple Perspectives,” Autonomous Agents and Multi-Agent Systems, Vol. 22, 2010, pp. 317- 355. Cheng, H., K.A. Hua and N. Yu, “An Automatic Feature Generation Approach to Multiple Instance Learning and its Applications to Image Databases,” International Journal of Multimedia Tools and Applications, Vol. 47, No. 3, 2010, pp. 507-524. Gangopadhyay, S., A. Masunov, T. Inerbaev, J. Mesit, R. Guha, A. Sleiti and J. Kapat, “Understanding Oxygen Vacancy Migration and Clustering in Barium Strontium Cobalt Iron Oxide,” Solid State Ionics, Vol. 181, No. 23-24, 2010, pp. 1067-1073. Gao, X., M. Bassiouni and G. Li, “Effective Preemptive Scheduling Scheme for Optical Burst Switched Networks with Cascaded Wavelength Conversion Consideration,” Journal of Optical Engineering, Vol. 49, No. 3, 2010, pp. 035004.1-035004.10.

Gauci, J. and K. Stanley, “Autonomous Evolution of Topographic Regularities in Artificial Neural Networks,” Neural Computation, Vol. 22, No. 7, 2010, pp. 1860-1898.

Ho, A., H.Y. Ho and K.A. Hua, “Handling High Mobility in Next-Generation Wireless Ad Hoc Networks,” International Journal of Communication Systems, Vol. 23, No.9/10, 2010, pp. 1078-1092.

Hu, H., “Mining Patterns in Disease Classification Forests,” Journal of Biomedical Informatics, Vol. 43, No. 5, 2010, pp. 820-7.

Hu, H., “An Efficient Algorithm to Identify Coordinately Activated Transcription Factors,” Genomics, Vol. 95, No. 3, 2010, pp. 143-50.

Jiang, N., S. Sheu, K.A. Hua and O. Ozyer, “A Finite-State-Model Scheme for Efficient Cooperation Enforcement in Mobile Ad Hoc Networks,” International Journal of Wireless and Mobile Computing, Vol. 4, No. 1, 2010, pp. 3-16.

Junejo, I. and H. Foroosh, “GPS Coordinates Estimation and Camera Calibration from Solar Shadows,” Computer Vision and Image Understanding, Vol. 114, No. 9, 2010, pp. 991-1003. Li, S. and S. Lang., “A Partition Based Method for Finding Highly Correlated Pairs,” International Journal of Data Mining, Modeling and Management, Vol. 2, No. 4, 2010, pp. 334-350.

Liu, F. and K.A. Hua, “Protecting User Privacy Better with Query I-Diversity,” International Journal of Information Security and Privacy, Vol. 4, No. 2, 2010, pp. 1-18.

Luo, Y. and L. Bölöni, “Analyzing and Exploiting the Competitiveness of Scenarios for Negotiating Convoy Formation under Time Constraints,” Multiagent and Grid Systems, Vol. 6, No. 5-6, 2010, pp. 415-435.

Malin, J., C. Millward, F. Gomez and D. Throop, “Semantic Annotation of Aerospace Problem Reports to Support Text Mining,” IEEE Intelligent Systems, Vol. 25, No. 5, 2010, pp. 20-26.

Page 10: 2010 College of Engineering & Computer Science Publications Books

       

10

Marinescu, D., C. Yu and G. M. Marinescu, “Scale-free, Self-organizing very Large Sensor Networks,” Journal of Parallel and Distributed Computing, Vol. 70, No. 5, 2010, pp. 612-622. Obert, J., F. Pelacini and S. N. Pattanaik, “Visibility Editing for all Frequency Shadow Design,” Computer Graphics Forum, Vol. 29, No. 4, 2010, pp. 1441-1449. Peng, R., A. Aved and K. A. Hua, “Real Time Query Processing on Live Videos in Networks of Distributed Cameras,” International Journal of Interdisciplinary Telecommunications and Networking, Vol. 2, No. 1, 2010, pp. 27-48.

Pryyma, V., L. Bölöni and D. Turgut, “Active Time Scheduling for Rechargeable Sensor Networks,” Computer Networks, Vol. 54, No. 4, 2010, pp. 631-640. Risi, S., C.E. Hughes and K.O. Stanley, “Evolving Plastic Neural Networks with Novelty Search,” Adaptive Behavior, Vol. 18, No. 6, 2010, pp. 470-491.

Sengupta, S., M. Chatterjee and K. Kwiat, “A Game Theoretic Framework for Power Control in Wireless Sensor Networks,” IEEE Transactions on Computers, Vol. 59, No. 2, 2010, pp. 231-242.

Vasudevan, M. and N. Deo, “Community Identification Algorithm using Relative Edge Density,” Congressus Numeratium, Vol. 204, 2010, pp. 147-160.

Verbancsics, P. and K. Stanley, “Evolving Static Representations for Task Transfer,” Journal of Machine Learning Research, Vol. 11, 2010, pp. 1737-1769.

Wang, P., S. Sparks and C.C. Zou. “An Advanced Hybrid Peer-to-Peer Botnet,” IEEE Transactions on Dependable and Secure Computing, Vol. 7, No. 2, 2010, pp. 113-127.

Wang, P., L. Wu, R. Cunningham and C.C. Zou, “Honeypot Detection in Advanced Botnet Attacks,” International Journal of Information and Computer Security, Vol. 4, No. 1, 2010, pp. 30–51.

Wingrave, C. and J. LaViola, “Reflection on the Design and Implementation of Virtual Environments,” PRESENCE: Teleoperators and Virtual Environments, Vol. 19, No. 2, 2010, pp. 179-195.

Wingrave, C., B. Williamson, P. Varcholik, J. Rose, A. Miller, E. Charbonneau, J. Bott and J. LaViola, “Wii Remote and Beyond: Using Spatially Convenient Devices for3D User Interfaces,” IEEE Computer Graphics and Applications, Vol. 30, No. 2, 2010, pp.71-85.

Wu, L., X. Cao and H. Foroosh, “Camera Calibration and Geo-Location Estimation from Two Shadow Trajectories,” Computer Vision and Image Understanding, Vol. 114, 2010, pp. 915-927.

Xie, F., K.A. Hua and N. Jiang, “Optimizing Patching-based Multicast for Video on Demand in Wireless Mesh Networks,” International Journal of Communication Systems, Vol. 23, No. 9-10, 2010, pp. 1057-1309.

Xiong, Y. and J. LaViola, “A ShortStraw-based Algorithm for Corner Finding in Sketch-Based Interfaces,” Computers and Graphics, Vol. 34, No. 5, 2010, pp. 513-527.

Zhang, S. and C. Zhong, “Computational Tools for RNA Structural Motif Identification,” Biotech International, Vol. 22, 2010, pp. 6-9.

Page 11: 2010 College of Engineering & Computer Science Publications Books

       

11

Zhao, L., X. Wang and G. Sukthankar, “Recognizing Household Activities from Human Motion Data using Active Learning and Feature Selection,” Journal of Technology and Disability, Vol. 22, No. 1-2, 2010, pp. 17-26.

Zhong, C., H. Tang and S. Zhang, "RNAMotifScan: Automatic Identification of RNA Structural Motifs using Secondary Structural Alignment,” Nucleic Acids Research, Vol. 38, No. 18, 2010, Online.

Electrical  and  Computer  Engineering  (ECE)   Amarin, R., C. Ruf and W.L. Jones, “Impact of Spatial Resolution on Wind Field Derived Estimates of Air Pressure Depression in the Hurricane Eye,” Molecular Diversity Preservation International Journal, Vol. 2, No. 3, 2010, pp. 611-907. Bailey, M.C., R. Amarin, J. Johnson, P. Nelson, M. James, D. Sikmons, C. Ruf, L. Jones and X. Gong, “Multi-Frequency Synthetic Thinned Array Antenna for the Hurricane Imaging Radiometer,” IEEE Transactions on Antenna and Propagation, Vol. 58, No. 8, 2010, pp. 2562-2570. Bailey, M.C., R.A. Amarin, J.W. Johnson, P. Nelson, M.W. James, D.E. Simmons, C.S. Ruf, W.L. Jones and X. Gong, “Multi-frequency Synthetic Thinned Array Antenna for the Hurricane Imaging Radiometer,” IEEE Transactions on Antennas and Propagation, Vol. 58, No. 8, 2010, pp. 2562-2570.

Batarseh, M.G., W. Al-Hoor, L. Huang, C. Iannello and I. Batarseh, “Window-Masked Segmented Digital Clock Manager- FPGA based Digital Pulse Width Modulator Technique,” IEEE Transactions on Power Electronics, Vol. 24, No. 11, 2010, pp. 2649-2660. Biswas, S.K., K. Gopalan, W.L. Jones and S. Bilanow, “Correction of Time-Varing Radiometric Errors in TRMM Microwave Imager Calibrated Brightness Temperature Products,” IEEE Geoscience & Remote Sensing Letters, Vol. 7, No. 4, 2010, pp. 851-855. Chan S.H., T.X. Wu and T.Q. Nguyen, “Comparison of Two Frame Rate Conversion Schemes for Reducing LCD Motion Blurs,” IEEE Signal Processing Letters, Vol. 17, No. 9, 2010, pp. 783-786. Chou, M.M.C and D.C. Malocha, “Acoustic Velocities of Shear Waves in La3Ga5.5Ta0.5O14 Piezoelectric Crystal using Singular Value Decomposition,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, Vol. 57, No. 8, 2010, pp. 1813-1817. Cui, Q., S. Parthasarathy, J.J. Liou, P. Zhou and J. Salcedo, “Snapback and Post-snapback Saturation of Pseudomorphic High Electron Mobility Transistor (pHEMT) Subject to ESD Stresses,” IEEE Electron Device Letters, Vol. 31, 2010, pp. 425-427. El-Nimri, S.F., W.L. Jones, E. Uhlhorn, C. Ruf, J. Johnson and P. Black, “An Improved C-Band Ocean Surface Emissivity Model at Hurricane-Force Wind Speeds over a Wide Range of Earth Incidence Angles,” IEEE Geoscience & Remote Sensing Letters, Vol. 7, No. 4, 2010, pp. 641-645. Ellis, D., Y. Zhou, J.A. Salcedo, J.J. Hajjar and J.J. Liou, “Prediction and Modeling of Thin Gate Oxide Breakdown Subject to Arbitrary Transient Stresses,” IEEE Transactions on Electron Devices, Vol. 57, 2010, pp. 2296-2305.

Page 12: 2010 College of Engineering & Computer Science Publications Books

       

12

Fisher, B. and D. Malocha, “Study of the Acoustoelectric Effect for SAW Sensors,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, Vol. 57, No. 3, 2010, pp. 698-706. Gallagher, D.R., M.W. Gallagher, N. Saldanha, J.M. Pavlina and D.C. Malocha, “Spread Spectrum Orthogonal Frequency Coded SAW Tags and Sensors using Harmonic Operation,” IEEE Transactions on Microwave Theory and Techniques, Vol. 58, No. 3, 2010, pp.674-679. Hu, H., W. Al-Hoor, N.H. Kutkut, I. Batarseh and Z.J. Shen, “Efficiency Improvement of Grid-Tied Inverters at Low Input Power using Pulse-Skipping Control Strategy,” IEEE Transactions on Power Electronics, Vol. 25, No. 12, 2010, pp. 3129-3138. Huang J. and J. Lee, “Reconfigurable Architecture for ZQDCT using Computational Complexity Prediction and Bitstream Relocation,” IEEE Embedded Systems Letters, Vol. 3, No. 1, 2010, pp. 1-4. Kaylani, A., M. Georgiopoulos, M. Mollaghasemi and G. Anagnostopoulos, “MO-GART: An Adaptive Multi-objective Approach to Evolving ART Architectures,” IEEE Transactions on Neural Networks, Vol. 21, No. 4, pp. 529-550, 2010. Koufakou, M. and M. Georgiopoulos, “A Fast Outlier Detection Strategy for Distributed High Dimensional Datasets with Mixed Attributes,” Data Mining and Knowledge Discovery, Vol. 20, No. 2, 2010, pp. 259-289. Kuang, W., P. Zhao, J.S. Yuan and R.F. DeMara, “Design of Asynchronous Circuits for High Soft Error Tolerance in Deep Submicron CMOS Circuits,” IEEE Transactions on VLSI Systems, Vol. 18, No. 10, 2010, pp. 410 – 422. Landowski, M. and Z.J. Shen, “TCAD Based Power Semiconductor Device eLearning Tools,” Journal of Power Electronics, Vol. 10, No. 6, 2010, pp. 643-647. Li, M., S. Dong, J.J. Liou, B. Song and Y. Han, “A Novel Capacitance Coupling Triggered SCR for Low Voltage ESD Applications,” IEEE Electron Device Letters, Vol. 31, 2010, pp. 1089-1091. Li, Y. and J.J. Liou, “Evaluation of Transient Behavior of Polysilicon-bound Diode for Fast ESD Applications,” IEEE Transactions on Electron Devices, Vol. 57, 2010, pp. 2736-2743. Li, Y. and J.J. Liou, “Multiple-finger Turn-on Uniformity in Silicon Controlled Rectifiers,” Solid-State Electronics, Vol. 54, 2010, pp. 1641-1643. Li, Y., J.J. Liou, J. Vinson and L. Zhang, “Investigation of LOCOS- and Polysilicon-bound Diodes for Robust Electrostatic Discharge (ESD) Applications,” IEEE Transactions on Electron Devices, Vol. 57, 2010, pp. 814-819. Liu, W., J.J. Liou, Y. Jiang, N. Singh, G.D. Lo, J. Chung and Y.H. Jeong, “Investigation of Sub-10 nm, Gate-all-around Nanowire Field-effect Transistors for Electrostatic Discharge Applications,” IEEE Transactions on Nanotechnology, Vol. 9, 2010, pp. 969-971. Liu, W., J.J. Liou, Y. Jiang, N. Singh, G.Q. Lo, J. Chung and Y.H. Jeong, “Failure Analysis of Si Nanowire Field-effect Transistors Subject to Electrostatic Discharge (ESD) Stresses,” IEEE Electron Device Letters, Vol. 31, 2010, pp. 915-917.

Page 13: 2010 College of Engineering & Computer Science Publications Books

       

13

Liu, X., J.S. Yuan and J.J. Liou, “Electro-thermal Stress Effect on InGaP/GaAs Heterojunction Bipolar Low-noise Amplifier Performance,” Microelectronics Reliability, Vol. 50, 2010, pp. 365-369. Liu, Y., R. Ranganathan, M. Hunter and W.B. Mikhael, “Fast Converging Conjugate Gradient Adaptive Algorithm for Complex Channel Estimation,” IEEE Electronics Letters, Vol. 46, No. 2, 2010, pp. 180-182. Liu, Z., J.J. Liou, S. Dong and Y. Han, “Silicon Controlled Rectifier Stacking Structure for High Voltage ESD Protection Applications,” IEEE Electron Device Letters, Vol. 31, 2010, pp. 845-847. Lu, J., H. Jia, A. Arias, X.Wang, K. Padmanabhan, W. Gerard Hurley and Z.J. Shen, “Modeling, Design, and Characterization of Multi-Turn Bondwire Inductors with Ferrite Epoxy Glob Cores for Power Supply System-on-Chip or System-in-Package Applications,” IEEE Transactions on Power Electronics, Vol. 25, No. 8, 2010, pp. 2010-2017. Malobabic, S., J.A. Salcedo, J.J. Hajjar and J.J. Liou, “Analysis of Safe Operating Area of NLDMOS and PLDMOS Transistors Subject to Transient Stresses,” IEEE Transactions on Electron Devices, Vol. 57, 2010, pp. 2655-2663. Miguez, R. and M. Georgiopoulos, “A Genetically Engineered Probabilistic Neural Network,” Nonlinear Analysis-Theory, Methods and Applications, Vol. 73, No. 6, 2010, pp. 1783-1791. Mikhael, W.B., R. Ranganathan and T.Yang, “Complex Adaptive ICA employing the Conjugate Gradient Principle for Signal Separation in Time-Varying Flat Fading Channels,” Journal of Circuit, Systems & Signal Processing, Vol. 29, 2010, pp. 469-480. Muci, J.A., D. Rey, F.J. Garcia-Sanchez, D.C. Munoz, A. Ortiz-Conde, C.S. Ho and J.J. Liou, “Extraction of Mobility Degradation and Source-and-drain Resistance in MOSFETs,” Journal of Integrated Circuits and Systems, Vol. 5, No. 2, 2010, pp. 103-109. Ortiz-Conde, A., F.J. García-Sánchez, J.J. Liou and C.S. Ho, “Integration-based Approach to Evaluate the Subthreshold Slope of MOSFETs,” Microelectronics Reliability, Vol. 50, 2010, pp. 312-315. Ortiz-Conde, A., F.J. García-Sánchez, J.J. Liou, W. Liu, W.C. Chen and H.C. Lin, “Parameter Extraction in Polysilicon Nanowire MOSFETs using New Double Integration-based Procedure,” Solid-State Electronics, Vol. 54, 2010, pp. 635-641. Peng G., J. Wang, Y. Zhu, H. Jiang, P. Shang, “Nexus: A Novel Weighted-Graph-Based Prefetching Algorithm for Metadata Servers in Large Scale Storage Systems,” IEEE Transactions on Computers, Vol. 59, No. 1, 2010, pp. 1-15. Pittner, J. and M.A. Simaan, “An Initial Model for Control of a Tandem Hot Metal Strip Rolling Process,” IEEE Transactions on Industry Applications, Vol. 46, No. 1, 2010, pp. 46-53. Pittner, J. and M.A. Simaan, “A Useful Control Model for Tandem Hot Metal Strip Rolling,” IEEE Transactions on Industry Applications, Vol. 46, No. 6, 2010, pp. 2251-2258. Pittner, J., N.S. Samaras and M.A. Simaan, “A New Strategy for Optimal Control of Continuous Tandem Cold Metal Rolling,” IEEE Transactions on Industry Applications, Vol. 46, No. 2, 2010, pp. 703-711.

Page 14: 2010 College of Engineering & Computer Science Publications Books

       

14

Qian, Z., O. Abdel-Rahman and I. Batarseh, “An Integrated Four-Port DC/DC Converter for Renewable Energy Applications,” IEEE Transactions on Power Electronics, Vol. 25, No. 7, 2010, pp. 1877-1887. Qian, Z., O. Abdel-Rahman, H. Al-Atrash and I. Batarseh, “Modeling and Control of Three-Port DC/DC Converter Interface for Satellite Applications,” IEEE Transactions on Power Electronics, Vol. 25, No. 3, 2010, pp. 637-649. Rajesh, C.P., P. Wahid and N. Behdad, “A Wideband Dual-polarized Substrate Integrated Cavity-backed Slot Antenna,” IEEE Antennas and Wireless Propagation Letters, Vol. 9, 2010, pp. 645-648. Ranganathan, R., T. Yang and W.B. Mikhael, “Optimum Block Adaptive ICA for Separation of Real and Complex Signals with Known Source Distributions in Dynamic Flat Fading Environments,” Journal of Circuits Systems and Computers, Vol. 19, No. 2, 2010, pp. 367-379. Sahin, I., N. Yilmazer and M.A. Simaan, “A Method for Sub-Optimal Fetal Heart Rate Estimation Under Noisy Conditions,” IEEE Transactions on Biomedical Engineering, Vol. 57, No.4, 2010, pp. 875-883. Secretan, J., A. Koufakou, M. Georgiopoulos and K. Cardona, “APHID: An Architecture for Private, High-performance Integrated Data-mining,” Journal of Future Generation Computer Systems, Vol. 26, No. 7, 2010, pp. 891-904. Stanley, J.E., D.H. Trout, S.K. Earles, I.N. Kostanic and P.F. Wahid, “Analysis of Multi-Layer Composite Cavity using FEKO,” The Applied Computational Electromagnetics Society Journal, Vol. 25, No. 1, 2010, pp. 69-74. Wang, Z., A. Behal and P. Marzocca, “Adaptive and Robust Aeroelastic Control of Nonlinear Lifting Surfaces with Single/Multiple Control Surfaces: A Review,” International Journal of Aeronautical and Space Science, Vol. 11, No. 4, 2010, pp. 285-302. Weirich, J., J. Legsgard, L. Wei, T.T. Alkeskjold, T.X. Wu, S.T. Wu and A. Bjarklev, “Liquid Crystal Parameter Analysis for Tunable Photonic Bandgap Fiber Devices,” Optics Express, Vol. 18, 2010, pp. 4074-4087. Yang, J., Z. Qu, J. Wang and K. Conrad, “Comparison of Optimal Solutions to Real-time Path Planning for a Mobile Vehicle,” IEEE Transactions on Systems, Man, and Cybernetics--Part A: Systems and Humans, Vol. 40, No. 4, 2010, pp. 721-731. Yuan, H. and Z. Qu, “Smooth Time-Varying Pure Feedback Control for Chained Nonholonomic Systems with Exponential Convergent Rate,” IET Control Theory & Applications, Vol. 4, No. 7, 2010, pp. 1235 - 1244. Yuan, J.S. and J. Ma, “Gate Oxide Breakdown Effect on Class-AB Power Amplifier and Sample-hold Circuit,” Microelectronics Reliability, Vol. 50, No. 6, 2010, pp. 801-806. Yuan, J.S., J. Ma, W.K. Yeh and C.W. Hsu, “Impact of Strain on Hot Electron Reliability of Dual-band Power Amplifier and Integrated LNA-mixer RF Performances,” Microelectronics Reliability, Vol. 50, No. 6, 2010, pp. 807-812.

Page 15: 2010 College of Engineering & Computer Science Publications Books

       

15

Industrial Engineering and Management Systems (IEMS)

Ahram, T.Z., P. McCauley-Bush and W. Karwowski, “Multi-criteria Weighted Model to Estimate Document Collections Intrinsic Dimensionality and Enhance Information Retrieval Performance,” Journal of Information Sciences, Vol. 180, No. 15, 2010, pp. 613-630.

Álvarez, H., L. Rabelo and D. Solís, “La Expansión del Canal de Panamá: Análisis utilizando un Modelo de Dinámica de Sistemas,” I + D Tecnológico – Revista de Investigación de la Universidad Tecnológica de Panamá, Vol. 6, No. 1/2, 2010, pp. 33-40. Batarseh, O., D. Nazzal and Y. Wang, “A Metamodel Approach to Simulate Material Handling in Wafer Fabs,” IEEE Transactions on Semiconductor Manufacturing, Vol. 23, No. 4, 2010, pp. 527-537. Bedny, I.S., W. Karwowski and G.Z. Bedny, “A Method of Human Reliability Assessment based on Systemic-Structural Activity Theory,” International Journal of Human–Computer Interaction, Vol. 26, No. 4, 2010, pp. 1-26. Covelli, J., J. Rolland, M. Proctor, J. Kincaid, J. Peter and P.A. Hancock, “Field of View Effects on Pilot Performance in Flight,” International Journal of Aviation Psychology, Vol. 20, No. 2, 2010, pp. 19-219.

Crumpton-Young, L., P. McCauley-Bush, L. Rabelo, K. Menza, A. Ferreras, B. Rodriguez, A. Millan, D. Miranda and M. Kelarestani, “Engineering Leadership Development Programs - A Look at What is Needed and What is Being Done,” Journal of STEM Education: Research and Innovations, Vol. 11, No. 3/4, 2010, pp. 10-21.

Daraiseh, N., S.N. Cronin, L.S. Davis, R.L. Shell and W. Karwowski, “Low Back Symptoms among Hospital Nurses, Associations to Individual Factors and Pain in Multiple Body Regions,” International Journal of Industrial Ergonomics, Vol. 40, No. 1, 2010, pp. 19-24.

Gammoh, D., D. Nazzal, A. Elshennawy and S. Furterer, “A Framework for Integrating Quantitative Quality Function Deployment with Business Architecture,” Journal of Management and Engineering Integration, Vol. 3, No. 1, 2010, pp. 14-20.

Gammoh, D., D. Nazzal, A. Elshennawy and S. Furterer, “A Novel Methodology to Enhance Business Alignment using Quantitative QFD and Business Modeling Tools,” Journal of Management and Engineering Integration, Vol. 3, No. 1, 2010, pp. 14-20. Jaworek, M., T. Marek, W. Karwowski, C. Andrzejczak and A. C. Genaidy, “Burnout Syndrome as a Mediator for the Effect of Work-Related Factors on Musculoskeletal Complaints among Hospital Nurses,” International Journal of Industrial Ergonomics, Vol. 40, No. 3, 2010, pp. 368-375. Kaylani, A., M. Georgiopoulos, M. Mollaghasemi, G. C. Anagnostopoulos, C. Sentelle and M. Zhong, “An Adaptive Multi-Objective Approach to Evolving ART Architectures,” IEEE Transactions on Neural Networks, Vol. 21, No. 4, 2010, pp. 529-550. Lodree, E.J. and C.D. Geiger, “A Note on the Optimal Sequence Position for a Rate-Modifying Activity under Simple Linear Deterioration,” European Journal of Operational Research, Vol. 201, No. 2, 2010, pp. 644-648.

Page 16: 2010 College of Engineering & Computer Science Publications Books

       

16

Lodree, E.J., C.D. Geiger and K.N. Ballard, “Coordinating Production and Shipment Decisions in a Two-Stage Supply Chain with Time-Sensitive Demand,” Mathematical and Computer Modeling, Vol. 51, No. 5/6, 2010, pp. 632-648. Nazzal, D., J.A. Jimenez, H.J. Carlo, A. Johnson and V. Lasrado, “An Analytical Model for Conveyor-based Material Handling System with Crossovers in Semiconductor Wafer Fabs,” IEEE Transactions on Semiconductor Manufacturing, Vol. 23, No. 3, 2010, pp. 468-476. Rabelo, L., M. Marin and L. Huddleston, “Data Mining and Complex Problems: Case Study in Composite Materials,” International Journal of Aerospace, Vol. 2, No. 1, 2010, pp. 165-170. Reid, C.R., P. McCauley-Bush, N. Cummings, D.L. McMullin and S.K. Durrani, “A Review of Occupational Knee Disorders,” Journal of Occupational Rehabilitation, Vol. 20, No. 4, 2010, pp. 489-501. Reid, C.R., P. McCauley-Bush, W. Karwowski and S.K. Durrani, “Occupational Postural Activity and Lower Extremity Discomfort: A Review,” International Journal of Industrial Ergonomics, Vol. 40, No. 3, 2010, pp. 247-256. Sala-Diakanda, S., J. Sepulveda and L. Rabelo, “A Methodology for Realistic Space Launch Risk Estimation Using Information-fusion-based Metric” Information Fusion, Vol. 11, No. 4, 2010, pp. 365-373.

Serag, E., A. Oloufa, L. Malone and E. Radwan, “A Model for Quantifying the Impact of Change Orders on Project Cost for US Roadwork Construction,” ASCE's Journal of Construction Engineering and Management, Vol. 136, No. 9, 2010, pp. 1015-1027. Yousef, N., N. Sapkota, J. Sepulveda and L. Rabelo, “Cost Consideration of a Supply Chain using Ontologies,” Journal of Management and Engineering Integration, Vol. 3, No. 1, 2010, pp. 126-135.

Mechanical, Materials and Aerospace Engineering (MMAE)

Almeria, B., W. Deng, T. Fahmy and A. Gomez, “Controlling the Morphology of Electrospray-Generated PLGA Microparticle for Drug Delivery,” Journal of Colloid Interface Science, Vol. 343, 2010, pp. 125-133.

Aminimanesh, N., S. Basu and R. Kumar, “Experimental Flame Speed in Multi-Layered Nano-Energetic Materials,” Combustion and Flame, Vol. 157, No. 3, 2010, pp. 476-480.

Anderson, J., D. Diaz, A. Karakoti and S. Seal, “Nanoceria Modified Platinum Gold Composite Electrodes for the Electrochemical Oxidation of Methanol and Ethanol in Acidic Media,” Journal of Physical Chemistry C, Vol. 114, No. 10, 2010, pp. 4595-4602.

Babu, S., J. Cho, J. Dowding, E. Heckert, C. Komanski, S. Das, J. Colon, C. Baker, W. Self, M. Bass and S. Seal, “Multicolored Redox Active Upconverter Cerium Oxide Nanoparticle for Bio-Imaging and Therapeutic,” Chemical Communications, Vol. 46, No. 37, 2010, pp. 6915-7.

Page 17: 2010 College of Engineering & Computer Science Publications Books

       

17

Basset, G., Y. Xu and O. Yakimenko, “Computing Short-Time Aircraft Maneuvers using Direct Methods,” The Journal of Computer and System Sciences International, Vol. 49, No. 3, 2010, pp. 481-513.

Basu, S., D. Lambe and R. Kumar, “Water Vapor and Carbon Dioxide Species Measurements in Narrow Channels,” International Journal of Heat Mass Transfer, Vol. 53, No. 4, 2010, pp. 703-714. Butler, B., A. Kassab, Chopra and M. Chaitanya, “Boundary Element Method for Electrochemical Dissolution with Geometric Non-linearities,” Engineering Analysis, Vol. 34, 2010, pp. 714-720.

Chai, G. and Q. Chen, “Characterization of Thermal Conductivity of Carbon Nanotube Reinforced Copper Composite,” Journal of Composite Materials, Vol. 44, No. 24, 2010, pp. 2863-2873.

Chen, R., P. Tran and D. Martello, “Effects of Nanoparticles on Nanofluid Droplet Evaporation,” International Journal of Heat and Mass Transfer, Vol. 53, 2010, pp. 3677-3682. Chen, Y., N. Orlovskaya, N. Miller, H. Abernathy, D. Haynes, D. Tucker and R. Gemmen, “La1.97Sr0.03Zr2O7 Pyrochlore Powder for Advanced Energy Application,” Advances in Science and Technology, Vol. 62, 2010, pp. 56-60.

Choi, H., J. Jedlinski, B. Yao and Y. Sohn, “Development of Thermally Grown Oxide on B-NiAl during Initial Stages of Oxidation at 1100°C,” Surface and Coatings Technology, Vol. 205, 2010, pp. 1206-1210.

Colon, J., N. Hsieh, A. Ferguson, P. Kupelian, S. Seal, W. Jenkins and C. Baker, “Cerium Oxide Nanoparticles Protect Gastrointestinal Epithelium from Radiation-Induced Damage by Reduction of Reactive Oxygen Species and Upregulation of Superoxide Dismutase 2,” Nanomedicine, Vol. 6, No. 5, 2010, pp. 698-705. Darbal A., K. Barmak, N.T. Nuhfer, T. Sun and K.R. Coffey, “Grain Size Determination and Grain Boundary Characterization of Nanocrystalline Thin Films from Conical Dark Field Imaging,” Microscopy and Microanalysis, Vol. 16, No. 2, 2010, pp. 1276-1277.

Deng, W. and A. Gomez, “The Role of Electric Charge in Microdroplets Impacting on Conducting Surfaces,” Physics of Fluids, Vol. 22, No. 5, 2010, pp. 1-4.

Deng, W., C. Waits and A. Gomez, “Digital Electrospray for Controlled Deposition,” Review of Scientific Instruments, Vol. 81, No. 3, 2010, pp. 1-6.

El-Zahab, D. and A.J. Kassab, “Minimization of the Wall Shear Stress Gradients in Bypass Grafts Anastomoses using Meshless CFD and Genetic Algorithms Optimization,” Computer Methods in Biomechanics and Biomedical Engineering, Vol. 13, 2010, pp. 35-47.

Ewh, A., E. Perez, D. Keiser and Y. Sohn, “Microstructural Characterization of U-Nb-Zr, U-Mo-Nb, and U-Mo-Ti Alloys via Transmission Electron Microscopy,” Journal of Phase Equilibria and Diffusion, Vol. 31, 2010, pp. 216-222.

Frazier, C., M. Lamnaouer, E. Divo, A. Kassab and E. Petersen, “Effect of Wall Heat Transfer on Shock-Tube Test Temperature at Long Times,” Shock Waves, Vol. 21, No. 1, 2010, pp. 1-17.

Page 18: 2010 College of Engineering & Computer Science Publications Books

       

18

Freihofer, G., L. Pollah, K. Walker, A. Medina and S. Raghavan, “Optical Stress Probe: In-situ Stress Mapping with Raman and Photo-stimulated Luminescence Spectroscopy,” Journal of Instrumentation, Vol. 5, 2010, pp. 12003-1-12.

Gámez, B., E. Divo, A. Kassab and M. Cerrolaza, “Evaluation of Fatigue Crack Growing in Cortical Bone using the Boundary Element Method,” International Journal of Healthcare Technology and Management, Vol. 11, No. 3, 2010, pp. 202-221.

Garimella, N., H. Choi and Y. Sohn, “Determination of Average Ternary Interdiffusion Coefficients using Moments of Interdiffusion Flux and Concentration Profiles,” Defects and Diffusion Forum, Vol. 297-301, 2010, pp. 1328-1333. Garimella, N., H. Choi and Y. Sohn, “Site Preference and Diffusion in Ni3AlAlloyed with Ir, Ta or Re at 1200°C,” Defects and Diffusion Forum, Vol. 297-301, 2010, pp. 1322-1327. Gao, F., Y. Wang, L. Zhang, W. Yang and L. An, “Optical Properties of Al-doped Single-Crystal Si3N4 Nanowires,” Journal of the American Ceramic Society, Vol. 93, No. 5, 2010, pp. 1364-1367.

Ghosh, D., G. Subhash and N. Orlovskaya, “Slip-line Pacing in ZrB2-based Ultrahigh Temperature Ceramics,” Scripta Materialia, Vol. 62, No. 11, 2010, pp. 839-842.

Gordon, A., R. Neu and D. McDowell, “Effect of Pre-Exposure on Crack Initiation Life of a Directionally-solidified Ni-base Superalloy,” International Journal of Fatigue, Vol. 31, 2010, pp. 393-401.

Gou, J., Y. Tang, J. Zhuge, Z. Zhao, R. Chen, D. Hui and C. Ibeh, “Fire Performance of Composite Laminates Embedded with Multi-ply Carbon Nanofiber Sheets,” Composites: Part B: Engineering, Vol. 41, 2010, pp. 176-181.

Gou, J., Z. Zhao, Y. Tang, F. Liang, D. Firsich and J. Fielding, “Carbon Nanofiber Paper for Lightning Strike Protection of Composite Materials,” Composites Part B: Engineering, Vol. 41, 2010, pp.192-198.

Gupta, A. and R. Kumar, “Droplet Impingement and Breakup on a Dry Surface,” Computers and Fluids, Vol. 39, No. 9, 2010, pp. 1696-1703.

Gupta, A. and R. Kumar, “Effect of Geometry on Droplet Formation in the Squeezing Regime in a Microfluidic T-Junction,” Journal of Microfluidics and Nanofluidics, Vol. 8, 2010, pp. 799-812. Gupta, A. and R. Kumar, “Flow Regime Transition at High Capillary Numbers in a Microfluidic T-junction: Viscosity Contrast and Geometry Effect,” Physics of Fluids, Vol. 22, No. 12, 2010, pp. 122001-1-11.

Harmikar, S., A. Agarwal, S. Seal and N. Dahotre, “Surface Engineering for Amorphous, Nanocrystalline and Biomaterials,” Multiscale Phenomenon in Surfaces, Vol. 62, No. 6, 2010, pp. 64.

Hofmeister, C., B. Yao, T. Delahanty, M. Van Den Burgh, K. Cho and Y. Sohn, “Composition and Structure of Nitrogen-containing Dispersoids in Trimodal Aluminum Metal Matrix Composites,” Journal of Materials Science, Vol. 45, 2010, pp. 4871-4876.

Page 19: 2010 College of Engineering & Computer Science Publications Books

       

19

Hong, Y., S. Ding, W. Wu, J. Hu, A.A. Voevodin, L. Gschwender, E. Snyder, L. Chow and M. Su, “Enhancing Heat Capacity of Colloidal Suspension using Nanoscale Encapsulated Phase-Change Materials for Heat Transfer,” ACS Applied Materials & Interfaces, Vol. 2, No. 6, 2010, pp. 1685-1691. Huang, Z., H. Hu, Y. Yang and K. Lin, “A Fast Handover Scheme based on Multiple Mobile Router Cooperation for a Train-based Mobile Network,” International Journal of Modeling, Identification & Control, Vol. 10, No. 2, 2010, pp. 202 – 212.

Idahosa, U., A. Sara, C. Xu and S. Basu, “Non-Premixed Acoustically Perturbed Swirling Flame Dynamics,” Combustion and Flame, Vol. 157, No. 9, 2010, pp. 1800-1814. Ilegbusi, O.J., H. Song and R. Chakrabarti, “Biocompatibility and Conductometric Property of Sol-Gel Derived ZnO/PVP Nanocomposite Biosensor Film,” Journal of Bionic Engineering, Vol. 7, No. 1, 2010, pp. 20-35. Ilegbusi, O.J. and E.Velaski-Tuema, “A Fluid-Structure Interaction Index of Coronary Plaque Rupture,” Biomedical Simulation, Vol. 5958, 2010, pp. 98-107.

Inerbev, T., Y. Kawazowe and S. Seal, “Theoretical Calculations of H Absorption of SnO2 (110) Surface: Effect of Doping and Caliniation,” Journal of Applied Physics, Vol. 107, No. 10, 2010, pp. 104504-1-7.

Jeong, G., H. Choi, Y. Sohn and S. Kwun, “Effects of Combined Surface Modification on Adhesion Strength of CrN Coatings for STS420,” Defects and Diffusion Forum, Vol. 297-301, 2010, pp. 1334-1339.

Jiang, T., A. Hill, W. Fei, Y. Wei, M. Tellam, C. Xu and L. An, “Making Bulk Ceramics from Polymeric Precursors,” Journal of the American Ceramic Society, Vol. 93, No. 10, 2010, pp. 3017-3019.

Karakoti, A., J. King, A. Vincent and S. Seal, “Synthesis Dependent Core Level Binding Energy Shift in the Oxidation State of Platinum Coated on Ceria-Titania and its Effect on Catalytic Decomposition of Methanol,” Applied Catalysis A, Vol. 388, 2010, pp. 262–271.

Karakoti, A., S. Singh, J. Dowding, S. Seal and W. Self, “Redox Active Scavenging Nanomaterials,” Chemical Society Reviews, Vol. 39, 2010, pp. 4422-4432.

Karakoti, A., O. Tsigkou, S. Yue, P.D. Lee, M. M. Stevens, J. Jones and S. Seal, “Rare Earth Oxides as Nanoadditives in 3-D Nanocomposites Scaffolds for Bone Regeneration,” Journal of Material Chemistry, Vol. 20, 2010, pp. 8912-8919.

Keshri, A., W. Choi, A. Agarwal and S. Seal, “Intermediate Temperature Tribological Behavior of Carbon Nanotube Reinforced Plasma Sprayed Aluminum Oxide Coating,” Surface Coatings and Technology, Vol. 204, No. 11, 2010, pp. 1847-55.

Keshri, A., J. Huang, V. Singh, W. Choi, S. Seal and A. Agarwal, “Synthesis of Aluminum Oxide Coating with Carbon Nanotube Reinforcement Produced by Chemical Vapor Deposition for Improved Fracture and Wear Resistance,” Carbon, Vol. 48, No.2, 2010, pp. 431-442.

Page 20: 2010 College of Engineering & Computer Science Publications Books

       

20

Kim, D., N. Lee, J. Park, I. Park, J. Kim and H. Cho, “Organic Electrochemical Transistor based Immunosensor for Prostate Specific Antigen (PSA) Detection using Gold Nanoparticles for Signal Amplification,” Biosensors and Bioelectronics, Vol. 25, No. 11, 2010, pp. 2477-2482.

Krishnan, V., S. Shmalo, C. Rathod, M. Bourke and R. Vaidyanathan, “Low Temperature Deformation of the R-Phase in a NiTiFe Shape Memory Alloy,” Applied Physics Letters, Vol. 97, No. 9, 2010, pp. 091910-1-3. Kuchma, M.H., C. Komanski, J. Colon, A. Teblum, A. Masunov, B. Alvrado, S. Babu, S. Seal, J. Summy and C. H. Baker, “Phosphate Ester Hydrolysis of Biologically Relevant Molecules by Cerium Oxide Nanoparticles, Nanomedicine,” Nanotechnology, Biology and Medicine, Vol. 6, No. 6, 2010, pp. 738-744.

Kumar, R., E. Tijerino, A. Saha and S. Basu, “Structural Morphology of Acoustically Levitated and Heated Nanosilica Droplet,” Applied Physics Letters, Vol. 97, No. 12, 2010, 123106-1-3. Kuravi, S., J. Du and L. Chow, “Encapsulated Phase Change Material Slurry Flow in Manifold Microchannels,” AIAA Journal of Thermophysics and Heat Transfer, Vol. 24, No. 2, 2010, pp. 364-373. Kusoglu, A., Y. Tang, M. Lugo, M. Santare, A. Karlsson, S. Cleghorn and W. Johnson, “Constitutive Response and Mechanical Properties of PFSA Membranes in Liquid Water,” Journal of Power Sources, Vol. 195, No. 2, 2010, pp. 483-492.

Lahiri, D., V. Singh, A. Keshri, S. Seal and A. Agarwal, “Carbon Nanotube Toughened Hydroxyapititie by Spark Plasma Sintering: Microstructural Evolution and Multiscale tribological Properties,” Carbon, Vol. 48, No. 11, 2010, pp. 3103-3120.

Lee, D., J. Park, Y. Joo, K. Lin and C. Ham, “Robust H-Inf Control for Uncertain Nonlinear Active Magnetic Bearing Systems via Takagi–Sugeno Fuzzy Models,” International Journal of Control, Automation, and Systems, Vol. 8, No. 3, 2010, pp. 636-646. Li, Z., R. Chen and P.Tran, “Effects of Multi-Component Diffusion, Buoyancy and Expansion on Laminar Diffusion Flame Liftoff,” Combustion and Flame, Vol. 157, 2010, pp. 1484-1495.

Li, Z. and O. J. Ilegbusi, “Flame Propagation in Combustion Synthesis of Ni - Ti Structural Bioimplant Material,” Advances in Natural Science, Vol. 3, No.2, 2010, pp. 62-70.

Lin, Y.R., J.H. Du, W. Wei, L.C. Chow and W. Notardonato, “Experimental Study on Heat Transfer and Pressure Drop of Recuperative Heat Exchangers using Carbon Foam,” ASME Journal of Heat Transfer, Vol. 132, No. 9, 2010, pp. 0919021-09190210. Louzguine, D., G. Xie, Q. Zhang, C. Suryanarayana and A. Inoue, “Formation, Structure and Crystallization Behavior of Cu-based Bulk Glass-Forming Alloys,” Metallurgical and Materials Transactions A, Vol. 41A, 2010, pp. 1664-1669.

Louzguine-Luzgin, D., I. Seki, T. Yamamoto, H. Kawaji, C. Suryanarayana and A. Inoue, “Double Stage Glass Transition in a Metallic Glass,” Physical Review B, Vol. B81, 2010, pp. 144202-1-6.

Page 21: 2010 College of Engineering & Computer Science Publications Books

       

21

Louzguine-Luzgin, D., C. Suryanarayana, T. Saito, Q.S. Zhang, N. Chen, J. Saida and A. Inoue, “Unusual Solidification Behavior of a Zr-Cu-Ni-Al Bulk Glassy Alloy Made from Low-Purity Zr,” Intermetallics, Vol. 18, 2010, pp. 1531-1536. Lu, H., J. Gou, J.S. Leng and S.Y. Du, “Electrical Conductivity and Shape-Memory Behavior of Self-Assembled Carbon Nanofiber Nanopaper Incorporated with Shape-Memory Polymer,” Smart Materials and Structures, Vol. 19, 2010, pp. 075021-1-7.

Lu, H., Y.J. Liu, J. Gou, J.S. Leng and S.Y. Du, “Synergistic Effect of Carbon Nanofiber and Carbon Nanopaper on Shape Memory Polymer Composite,” Applied Physics Letters, Vol. 96, No. 8, 2010, pp. 084102-1-3.

Lugovy, M., V. Slyunyayev and N. Orlovskaya, “An Ultimate State of Layered Cantilever Sensors under Bending: A Simplified Evaluation,” Mechanics of Advanced Materials and Structure, Vol. 17, No. 4, 2010, pp. 280-286.

Lukich, S., C. Carpenter and N. Orlovskaya, “Temperature and Stress Induced Changes of the Vibrational Response of Cubic and Rhombohedral Ceramics,” Journal of Power Sources, Vol. 195, No. 8, 2010, pp. 2301-2309.

Manjeri, R., S. Qiu, N. Mara, A. Misra and R. Vaidyanathan, “Superelastic Response of 111 and 101 Oriented NiTi Micropillars,” Journal of Applied Physics, Vol. 108, 2010, pp. 023501.

Mohan, P., T. Patterson, B. Yao and Y.H. Sohn, “Environmental Degradation of Thermal Barrier Coatings and Mitigation by Electrophoretically Deposited Overlay,” Journal of Thermal Spray Technology, Vol. 19, 2010, pp. 156-167.

Moqbel, S., D. Reinhart and R. Chen “Factors Influencing Spontaneous Combustion of Solid Waste,” Waste Management, Vol. 30, 2010, pp. 1600-1607.

Moore, N. J. and K.M. Lyons, “Leading-Edge Flame Fluctuations in Lifted Turbulent Flames,” Combustion Science and Technology, Vol. 182, No. 7, 2010, pp. 777-793.

Murshed, S., K. Vereen, D. Strayer and R. Kumar, “Experimental Investigation of Bubble Nucleation of a Refrigerant in Pressurized Boiling Flows,” Energy, Vol. 35, No. 12, 2010, pp. 5143-5150.

Orlovskaya, N., Y. Chen, N. Miller, H. Abernathy, D. Haynes, D. Tucker and R. Gemmen, “Glycine - Nitrate Synthesis of Sr Doped La2Zr2O7 Pyrochlore Powder,” Advances in Applied Ceramics, Vol. 110, No. 1, 2010, pp. 54-57.

Orlovskaya, N., S. Lukich, G. Subhash, T. Graule and J. Kuebler, “Mechanical Properties of 10 mol%Sc2O3-1 mol%CeO2-ZrO2 Ceramics,” Journal of Power Sources, Vol. 195, No. 9, 2010, pp. 2774-2781.

Pathak, S., J. Kuebler, A. Payzant and N. Orlovskaya, “Mechanical Behaviour of La1-xCaxCoO3 Perovskites as a Function of Ca Doping,” Journal Power Sources, Vol. 195, 2010, pp. 3612-3620.

Perez, E., B. Yao, D.D. Keiser and Y.H. Sohn, “Microstructural Analysis of As-Processed U-10wt.%Mo Monolithic Fuel Plate in AA6061 Matrix with Zr Diffusion Barrier,” Journal of Nuclear Materials, Vol. 402, 2010, pp. 8-14.

Page 22: 2010 College of Engineering & Computer Science Publications Books

       

22

Pirmohamed, T., J. Dowding, B. Wasserman, E. Heckert, A. Karakoti, J. King, S. Seal and W. Self, “Nanoceria Exhibit Redox State Dependant Catalase Mimetic Activity,” Chemical Communication, Vol. 46, 2010, pp. 2736-2738.

Rispoli, F., A. Angelov, D. Badia, A. Kumar, S. Seal and V.Shah, “Understanding the Toxicity of Aggregated Zero Valent Copper Nanoparticles against E Coli,” Journal of Hazardous Materials, Vol. 180, 2010, pp. 212-216.

Saha, A., S. Basu and R. Kumar, “Experimental Analysis of Thermophysical Processes in Acoustically Levitated Heated Droplets,” International Journal of Heat Mass Transfer, Vol. 53, No. 25/26, 2010, pp. 5663-5674.

Saha, A., R. Kumar and S. Basu, “Infrared Thermography and Numerical Study of Vaporization Characteristics of Pure and Blended Bio-Fuel Droplets,” International Journal of Heat and Mass Transfer, Vol. 53, No. 19/20, 2010, pp. 3862-3873. Santhanam, A., Y. Min, S. Mudur, A. Rastogi, B. Ruddy, A. Shah, E. Divo, A. Kassab, J. Rolland and P. Kupelian, “An Inverse Hyper-Spherical Harmonics-based Formulation for Re-constructing 3D Volumetric Lung Deformations,” Comptes Rendus Mechanique, Vol. 338, No. 7/8, 2010, pp. 461-473.

Sarkar, S., J. Zou, J. Liu, C. Xu, L. An and L. Zhai, “Polymer-Derived Ceramic Composite Fibers with Aligned Pristine Multiwalled Carbon Nanotubes,” ACS Applied Materials & Interfaces, Vol. 2, No. 4, 2010, pp. 1150-1156.

Sarkar, S., J. Zhou, C. Xu, L. An and L. Zhai, “Polymer-Derived Ceramic Composite Fibers with Aligned Pristine Carbon Nanotubes,” ACS Materials & Interface, Vol. 2, No. 4, 2010, pp. 1150-1156.

Savchyn, O., K.R. Coffey and P.G. Kik, “Determination of Optimum Si Excess Concentration in Er-doped Si-rich SiO2 for Optical Amplification at 1.54 μm,” Applied Physics Letters, Vol. 97, 2010, pp. 201107.

Savchyn, R., M. Todi, K.R. Coffey and P.G. Kik, “High-temperature Optical Properties of Sensitized Er3+ in Si-rich SiO2 - Implications for Gain Performance,” Optical Materials, Vol. 32, 2010, pp. 1274-1278.

Shah, V., P. Popeloreva, P. Baldrian, F. Nerud, A. Kumar and S. Seal, “Influence of Iron and Copper Nanoparticles on the Production of Lignocellulose Degrading Enzymes in the Fungus Trametes Versicolor,” Journal of Hazardous Materials, Vol. 178, 2010, pp. 1141-1145.

Sharma, R., A. Karakoti, S. Seal and L.Zhai, “Polypyrrole/Manganese Oxide Nano-Composite for High Performance Electrochemical Electrodes,” Journal of Power Sources, Vol. 195, No. 4, 2010, pp. 1256-1262.

Shelton, D., D.W. Peters, M.B. Sinclair, I. Brener, L.K. Warne, L.I. Basilio, K.R. Coffey and G.D. Boreman, “Effect of Thin Oxide Layers on Resonant Frequency and Amplitude in Infrared Metamaterials,” Optics Express, Vol. 18, 2010, pp. 1085-1090.

Shelton, D., K.R. Coffey and G.D. Boreman, "Experimental Demonstration of Tunable Phase in a Thermochromic Infrared-reflectarray Metamaterial," Optics Express, Vol. 18, 2010, pp.1330-1335.

Page 23: 2010 College of Engineering & Computer Science Publications Books

       

23

Singh, V., S. Babu, A. Karakoti, A. Agarwal and S. Seal, “Effect of Sub Micron Grains on Ionic Conductivity of Nanocrystalline Doped Ceria,” Journal of Nanoscience and Nanotechnology, Vol. 10, 2010, pp. 1-9.

Stephens, M., E. Petersen, D. Reid, R. Carro and S. Seal, “Multiparameter Study of Nanoscale TiO2 and CeO2 Additives in Composite AP/HTPB Solid Propellents,” Journal of Propellants Explosives and Pyrotechnics, Vol. 35, 2010, pp. 143-152.

Sun, T., B. Yao, A.P. Warren, K. Barmak, M.F. Toney, R.E. Peale and K.R. Coffey, “Surface and Grain Boundary Scattering in Nanometric Cu Films,” Physical Review B, Vol. 81, 2010, pp. 1-12.

Suryanarayana, C., T. Klassen and E. Ivanov, “Synthesis of Advanced Materials by Mechanical Alloying,” WPI Advanced Institute for Materials Research News, Vol. 10, 2010, pp. 123-135.

Tamhane, K., X. Zhang, J. Zou, J. Y. Fang, “Assembly and Disassembly of Tubular Spherulites,” Soft Matter, Vol. 6, 2010, pp. 1224.

Tang, Y. and J. Gou, “Synergistic Effect on Electrical Conductivity of Few-layer Graphene/Multi-walled Carbon Nanotube Paper,” Materials Letters, Vol. 64, 2010, pp. 2513-2516.

Tang, Y. and C. Xu, “Online Tool Deflection Compensation in End Milling of Curved Work Piece,” International Journal of Electronics, Computing and Engineering Education, Vol. 1, No. 1, 2010, pp. 23-28.

Vincent, A., T. Inerbev, S. Babu, A. Karakoti, W. Self, A. Masunov and S. Seal, “Tuning Hydrated Nanoceria Surfaces: Experimental/Theoretical Investigations of Ion Exchange and Implications in Organic and Inorganic Interactions,” Langmuir, Vol. 26, No. 10, 2010, pp. 7188-7198.

Wang, H., L. Lin, W. Yang, Z. Xie and L. An, “Preferred Orientation of SiC Nanowires Induced by Substrates,” Journal of Physical Chemistry C, Vol. 114, No. 6, 2010, pp. 2591-2594.

Westin, J., J. Kapat and L. Chow, “An Improved Thermoregulatory Model for Automatic Cooling Control Development in Liquid Cooling Garment Systems,” Journal of Thermal Science & Energy Applications, Vol. 2, No. 1, 2010, pp. 11.

Woodruff, T., V. Krishnan, B. Clausen, T. Sisneros, V. Livescu, D.W. Brown and R. Vaidyanathan, “Design, Implementation, and Testing of a Cryogenic Enhancing Heat Capacity of Colloidal Suspension using Nanoscale Encapsulated Loading Capability on an Engineering Neutron Diffract Meter,” Review of Scientific Instruments, Vol. 81, 2010, pp. 063903.

Wu, W., H. Bostanci, L.C. Chow, Y. Hong, M. Su and J.P. Kizito, “Nucleate Boiling Heat Transfer Enhancement for Water and FC-72 on Titanium Oxide and Silicon Oxide Surfaces,” International Journal of Heat and Mass Transfer, Vol. 53, 2010, pp. 1773-1777.

Xu, C. and Y. Shin, “A Self-Tuning Fuzzy Controller for a Class of Multi-Input Multi-Output Nonlinear Systems,” Engineering Applications of Artificial Intelligence, Vol. 24, No. 2, 2010, pp. 238-250.

Xu,Y., “Analytical Solutions to Spacecraft Formation Flying Guidance using Virtual Motion Camouflage,” The Journal of Guidance, Control, and Dynamics, Vol. 33, No. 5, 2010, pp. 1376-1386.

Page 24: 2010 College of Engineering & Computer Science Publications Books

       

24

Xu, Y., “Multi-Timescale Nonlinear Robust Control for a Miniature Helicopter,” IEEE Transaction on Aerospace and Electronic Systems, Vol. 46, No. 2, 2010, pp. 656-671.

Xu, Y. and G. Basset, “Virtual Motion Camouflage based Phantom Track Generation through Cooperative Electronic Combat Air Vehicles,” Automatica, Vol. 46, No. 9, 2010, pp. 1454-1461.

Yakhshi-Tafti, E., H.J. Cho and R. Kumar, “Diffusive Mixing through Velocity Profile Variation in Microchannels,” Experiments in Fluids, Vol. 50, No. 3, 2010, pp. 535-545.

Yakhshi-Tafti, E., H.J. Cho and R. Kumar, “Droplet Actuation on a Liquid Layer due to Thermo Capillary Motion: Shape Effect,” Applied Physics Letters, Vol. 96, 2010, pp. 3.

Yakhshi-Tafti, E., H.J. Cho and R. Kumar, “Impact of Drops on the Surface of Immiscible Liquids,” Journal of Colloid and Interface Science,” Vol. 350, No. 1, 2010, pp. 373-376.

Yang, M., C. Xu, C. Wu, K. Lin, Chao and L. An, “Fabrication of AA6061/Al2O3 Nano Ceramic Particle Reinforced Composite Coating by using Friction Stir Processing,” Journal of Materials Science, Vol. 45, No. 16, 2010, pp. 4431-4438.

Yang, F. and L. An, “Stress Analysis of the Field-Assisted Sintering: Electrothermal Mechanical Interaction,” International Journal of Applied Electromagnetic & Mechanics, Vol. 32, 2010, pp. 125-132.

Yang, W., F. Gao, C. Xu, G. Wei and L. An, “Fabrication of Si3N4/SiC Nanocomposites Toughened by in-Situ Formed Low-Dimensional Nanostructures,” Solid State Science, Vol. 12, 2010, pp. 1692-1695.

Yang, W., F. Gao, Y. Fan and L. An, “Al-Doped Single-Crystalline SiC Nanowires Synthesized by Pyrolysis of Polymer Precursors,” Journal of Nanoscience and Nanotechnology, Vol. 10, No. 7, 2010, pp. 4729-4732.

Yao, B., T. Patterson, C. Hofmester, Y.H. Sohn, M. Van Den Bergh, C. Smith, T. Delahanty and K. Cho, “Microstructural Features Influencing the Strength of Commercial Scale Lightweight Nanoengineered Trimodal Aluminum Composites,” Composites Part A, Vol. 41, 2010, pp. 933-941.

Yao, B., T. Sun, A. Warren, H. Heinrich, K. Barmak and K.R. Coffey, “High Contrast Hollow-Cone Dark Field Transmission Electron Microscopy for Nanocrystalline Grain Size Quantification,” Micron, Vol. 41, 2010, pp. 177-182.

Yoon, J. and Y. Xu, “Alternating Directional Implicit Method Enhanced Nonlinear Filtering for Relative Orbit Estimation,” Journal of Aerospace Engineering, Vol. 23, No. 3, 2010, pp. 186-196. Yu, Y., L. An, Y. Chen and D. Yang, “Synthesis of SiFeC Magnetoceramics from Inverse Polycarbosilane-based Microemulsions,” Journal of the American Ceramic Society, Vol. 93, No. 10, 2010, pp. 3324-3329. Zea, L., A.R. Diaz, C.K. Shepherd and R. Kumar, “Surface Extra Vehicular Activity Emergency Scenario Management: Tools, Procedures and Geologically-related Implications,” Acta Astronautica, Vol. 67, 2010, pp. 60-70.

Page 25: 2010 College of Engineering & Computer Science Publications Books

       

25

Zeng, P., A. Vincent, A. Kumar, J. Cho and S. Seal, “A Low Energy Room Temperature Chemiresistor Type Hydrogen Nanosensor: Utilizing Schottky Barriers at the Electrode/Sensing Material Interface,” IEEE Electron Device Letters, Vol. 31, No. 7, 2010, pp. 770-772. Zhang, X., M. Mathew, A.J. Gesquiere and J.Y. Fang, “Synthesis of Fluorescent Composite Tubes with pH-Controlled Shapes,” Journal of Materials Chemistry, Vol. 20, 2010, pp. 3716. Zhang, X. and J.F. Fang, “Assembly of Lipid Vesicles into Fractal and Prong Patterns on Solid Substrates,” Soft Matter, Vol. 6, 2010, pp. 2139. Zhang, Z., J. Zou, K. Tamhane, F. Kobzeff and J.Y. Fang, “Self-Assembly of pH-Switchable Spiral Tubes: Supramolecular Springs,” Small, Vol. 6, 2010, pp. 217. Zhao, Z., J. Gou, Y. Tang, J. Zhuge, R. Chen and D. Hui, “Fire Performance Characteristics of Composite Laminates Embedded with Multi-ply Carbon Nanofiber Sheets,” Composites Part B, Vol. 46, 2010, pp. 176-181.

Zhuge, J.F., Y. Tang, J. Gou, R.H. Chen, C. Ibeh and Y. Hu, “Flammability of Carbon Nanofiber-Clay Nanopaper based Polymer Composites,” Polymers for Advanced Technologies, Vol. 22, 2010, Online. Zou, J. and J. Y. Fang, “Size-dependent Director Configuration in Liquid-crystals Droplets Encapsulated with Polyelectrolytes,” Langmuir, Vol. 26, 2010, pp. 7025. Zou, J., J. Liu, A. Karakoti, A. Kumar, D. Joung, S. Khondaker, S. Seal and L. Zhai, “Ultra-light Flexible Multi-walled Carbon Nanotube Aerogel and Its Pressure Responsive Properties,” ACS Nano, Vol. 4, No. 12, 2010, pp. 7293-7302.

Page 26: 2010 College of Engineering & Computer Science Publications Books

       

26

Conference Papers Civil, Environmental and Construction Engineering (CECE)

Abdel-Aty M. and A. Pande, “Enhancing Safety through Advanced Proactive Traffic Management,” Proceedings of the 17th ITS World Congress, Busan, Korea, October 25-29, 2010.

Abdel-Aty M. and K. Haleem, “Analysis of the Safety Characteristics of Unsignalized Intersections,” Proceedings of the 12th World Conference on Transport Research, Lisbon, Portugal, June 11-15, 2010. Abdel-Aty M., A. Ekram and H. Huang, “A Study on Visibility Obstruction Related Crashes Due to Fog and Smoke,” Proceedings of the 12th World Conference on Transport Research, Lisbon, Portugal, June 11-15, 2010. Abdel-Aty M., A. Oloufa, H. Hassan, M. Ahmed and K. Siddiqui, “Portable Visibility Warning System for the Safety of Highways,” Proceedings of the 17th ITS World Congress, Busan, Korea, October 25-29, 2010. Abdel-Aty M., A. Oloufa, H. Hassan, M. Ahmed and K. Siddiqui, “Portable Visibility Warning System for the Safety of Highways,” Proceedings of the 17th ITS World Congress, Pusan, Korea, October 25-29, 2010. Abdel-Aty M., C. Siddiqui, A. Darwiche and H. Huang, “Macroscopic Safety Investigation at the Traffic Analysis Zone Level,” Proceedings of the 15th International Conference on Road Safety on Four Continents, Abu Dhabi, United Arab Emirates, March 28-30, 2010, pp. 519-531. Abdel-Aty, M., K. Haleem, P. Kerr and J. Santos, “Web-based Application for Providing Crash Profiles at Intersections,” Proceedings of the 89th Annual Meeting of the Transportation Research Board, Washington, DC, January 10-14, 2010.

Aviram, A., K.R. Mackie and B. Stojadinovic, “Cost-effectiveness of Seismic Isolation and Fiber-reinforced Concrete in Typical Bridge Construction in California,” Proceedings of 9th US National and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, July 25-29, 2010, CDROM. Aviram, A., K.R. Mackie and B. Stojadinovic, “Structural Performance of Seismically Isolated and Fiber-Reinforced Concrete Bridges,” Proceedings of 9th US National and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, July 25-29, 2010, CDROM. Bacopoulos, P., S.C. Hagen, L. Thomas and S. Bratos, “Widening and Deepening the Main Navigational Channel of the Lower St. Johns River (Northeastern Florida): Simulation of the Pre- and Post-modification Hydrodynamics,” Proceedings of the 12th International Conference on Port and Harbor Development, Jacksonville, FL, April 25-28, 2010, pp. 21-30. Catbas, F.N., A.O. Sardinas, M. Gul and H.B. Gokce, “Heavy Movable Structure Health Monitoring: Case Study on a Bascule Bridge in Ft. Lauderdale,” Proceedings of the 13th Biennial Movable Bridge Symposium, Orlando, FL, October 25-28, 2010.

Page 27: 2010 College of Engineering & Computer Science Publications Books

       

27

Catbas, F.N., H.B. Gokce and M. Gul, “Load Rating using a Practical Analysis and Testing Method for Existing Reinforced Concrete T-Beam Bridges,” Proceedings of the Transportation Research Board Annual Meeting, Washington, DC, January 10-14, 2010.

Catbas, F.N., H.B. Gokce, T. Dumlupinar, R. Zaurin, M. Gul, T. Terrell, D. Harper and D.M. Frangopol, “Maintenance Monitoring System Design of a Movable Bridge,” Proceedings of the International Conference on Bridge Maintenance, Safety and Management, Philadelphia, PA, July 11-15, 2010. Catbas, F.N., M. Gul and H.O. Sazak, “Dynamic Testing and Analysis of a Football Stadium,” Proceedings of the 28th International Modal Analysis Conference, Jacksonville, FL, February 1-4, 2010. Catbas, F.N., M. Gul, B. Gokce, T. Dumlupinar and R. Zaurin, “Use of Statistical Analysis, Computer Vision and Reliability for Structural Health Monitoring,” Proceedings of the ASCE Structures Congress, Orlando, FL, May 12-14, 2010. Catbas, F.N., R. Moon and A.E. Aktan, “An Integrated View for St-ID of Civil Infrastructure Systems: An Overview of a Collaborative Effort,” Proceedings of the ASCE Structures Congress, Orlando, FL, May 12-14, 2010. Catbas, F.N., R. Zaurin, M. Gul, A. Sardinas, T. Dumlupinar, B. Gokce and T. Terrell, “Heavy Movable Structure Health Monitoring: A Case Study with a Movable Bridge in Florida,” Proceedings of the ASCE Structures Congress, Orlando, FL, May 12-14, 2010. Catbas, F.N., T. Dumlupinar, H.B. Gokce, M. Gul and R. Zaurin, “Structural Health Monitoring Case Study on a Movable Bridge,” Proceedings of the Transportation Research Board Annual Meeting, Washington, DC, January 10-14, 2010.

Chang, N.B., M. Wanielista, F. Hossain and A. Daranpob, “Nutrient Removal in a Passive On-site Wastewater Treatment System with a Recirculation Filtration Tank,” Proceedings of the World Environmental and Water Resources Congress, Providence, RI, May 16-20, 2010, CD-ROM. Chang, N.B., M. Wanielista, Z. Xuan and A. Daranpob, “Using a Subsurface Upflow Wetland for Nutrient Removal in On-site Wastewater Treatment Systems,” Proceedings of the World Environmental and Water Resources Congress, Providence, RI, May 16-20, 2010, CD-ROM. Chen Y., M. Abdel-Aty, H. Huang and M. Ma, “Full Bayesian Classifier of Driver Scene Aesthetics based on Ordered Models,” Proceedings of the 89th Annual Meeting of the Transportation Research Board, Washington, DC, January 10-14, 2010. Chi-Han, C. and F.N. Nnadi, “Factors Affecting Longwave Radiation in Various Landuses in Northeast Florida,” Proceedings of the University Council on Water Resources, Seattle, WA, July 13-15, 2010. Cooper, C.D., J. Ross, M. Radford, O. Duarte and W. Champion, “Emissions Inventory for Central Florida with Emphasis on On-Road and Non-Road Sources,” Proceedings of the 103rd Annual Conference and Exhibition of the International Air & Waste Management Association, Calgary, Canada, June 22-25, 2010.

Page 28: 2010 College of Engineering & Computer Science Publications Books

       

28

Dumlupinar, T., H.B. Gokce, F.N. Catbas and D.M. Frangopol, “Time-variant Reliability and Load Rating of a Movable Bridge using Structural Health Monitoring,” Proceedings of the 28th International Modal Analysis Conference, Jacksonville, FL, February 1-4, 2010. Dumlupinar, T., K.R. Mackie, F.N. Catbas, H.B. Gokce and D.M. Frangopol, “Uncertainty and Reliability Analysis using Monitoring Data and Artificial Neural Network (ANN) Calibration,” Proceedings of the International Conference on Bridge Maintenance, Safety and Management, Philadelphia, PA, July 11-15, 2010.

Duranceau, S.J., “Determination of Total Iodide in Seawater Permeate,” Proceedings of the American Membrane Technology Conference and Exposition, San Diego, CA, July 12-15, 2010, CD-ROM. Gul, M. and F.N. Catbas, “Damage Detection using a Novel Time Series Methodology: Application to the Z24 Bridge Data,” Proceedings of the International Conference on Bridge Maintenance, Safety and Management, Philadelphia, PA, July 11-15, 2010. Gul, M. and F.N. Catbas, “Damage Detection with Ambient Vibration Data using Time Series Modeling,” Proceedings of the 28th International Modal Analysis Conference, Jacksonville, FL, February 1-4, 2010. Gurr, E. and F.N. Nnadi, “Continuous Dry Stream Measurement,” Proceedings of the University Council on Water Resources, Seattle, WA, July 13-15, 2010. Haber, Z.B. and K.R. Mackie, “Short-term Durability of Polyurethane Matrix Carbon Composites for Civil Infrastructure Applications,” Proceedings of the Structural Faults and Repair Conference, Edinburgh, Scotland, June 15-17, 2010, CDROM.

Haber, Z.B., E. Zghayar, K.R. Mackie and W. Potter, “External Anchorage Failure and Tendon Pull-out Tests on Bridge Piers,” Proceedings of the ASCE Structures Congress, Orlando, FL, May 12-15, 2010, CDROM. Haddad, A, D.R. Reinhart and M. Chopra, “Use of Vegetative Mulch as Alternative Landfill Cover,” Proceedings of the 2010 Global Waste Management Symposium, San Antonio, TX, October 3-6, 2010. Harb, R., E. Radwan and K. Shaaban, “Two Simplified Dynamic Lane Merging Systems (SDLMS) For Three-to-Two Short Term Work Zone Lane Closure Configuration,” Proceedings of the 89th Annual Meeting of the Transportation Research Board, Washington, DC, January 10-14, 2010. Harb, R., E. Radwan and V. Dixit, “Comparing Three Lane Merging Schemes for Short Term Work Zones- A Simulation Study,” Proceedings of the 89th Annual Meeting of the Transportation Research Board, Washington, DC, January 10-14, 2010. Harb, R., E. Radwan, X. Su and C. Russo, “Exploring Toll-Lane Processing Time, An Empirical Analysis,” Proceedings of the 89th Annual Meeting of the Transportation Research Board, Washington, DC, January 10-14, 2010. Huang H. and M. Abdel-Aty, “Multilevel Data in Traffic Safety: A 5 X ST-Level Hierarchy,” Proceedings of the 15th International Conference Road Safety on Four Continents, Abu Dhabi, United Arab Emirates, March 28-30, 2010, pp. 305-318.

Page 29: 2010 College of Engineering & Computer Science Publications Books

       

29

Huang H., M. Abdel-Aty, A. Ekram, A. Oloufa, Y. Chen and R. Morrow, “Fog and Smoke Related Crashes in Florida: Identifying Crash Characteristics, Spatial Distribution and Injury Severity,” Proceedings of the 89th Annual Meeting of the Transportation Research Board, Washington, DC, January 10-14, 2010. Kaneko, D., P. Yang, N.B. Chang and T. Kumakura, “Developing a Desertification Monitoring System for Asian Grasslands by RSEM Photosynthesis Model using MODIS and SPOT Data,” Proceedings of the International Society of Photogrammetry and Remote Sensing Technical Commission VIII Symposium, August 9-12, Kyoto, Japan, CD-ROM. Khalafallah, A., A. Elshennawy, N. Yousef and M. Abdel-Raheem, “Evaluating Contractor Quality Control under Material and Non-Material Models,” Proceedings of the 6th International Conference on Innovation in Architecture, Engineering and Construction, State College, PA, June 9-11, 2010, pp. 876-885. Khalafallah, A., N. Yousef, A. Elshennawy and M. Abdel-Raheem, “Cost Effectiveness and Risks of Outsourcing Quality Control Verification for Highway Projects,” Proceedings of the Engineering Project Organizations Conference, South Lake Tahoe, CA, November 4-7, 2010. Lu, J., K. Mackie and A. Elgamal, “Performance-based Earthquake Evaluation of a Single Column Bridge System,” Proceedings of the 7th International Conference on Urban Engineering & 5th International Conference on Earthquake Engineering, Tokyo, Japan, March 3-5, 2010, CDROM. Mackie, K.R., “Sensitivities in Repair Cost and Repair Time Metrics for Seismic Bridge Response,” Proceedings of the 2010 Structures Congress in Conjunction with the19th Analysis and Computation Specialty Conference, Orlando, FL, May 12-15, 2010, CDROM. Mackie, K.R., J. Lu and A. Elgamal, “User Interface for Performance-based Earthquake Engineering: A single bBent Bridge Pilot Investigation,” Proceedings of the 9th US National and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, July 25-29, 2010, CDROM. Moon, F., F.N. Catbas, D.M. Frangopol and A.E. Aktan, “Leveraging St-Id for Decision-Making,” Proceedings of the ASCE Structures Congress, Orlando, FL, May 12-14, 2010. O’Reilly, A.M., M. Wanielista and N.B. Chang, “Algal Toxin Transport and Fate in Groundwater beneath Stormwater Ponds: Implications for Reuse of Infiltrated Stormwater,” Proceedings of the Groundwater Quality Conference: Quality Management in a Rapidly Changing World, Zurich, Switzerland, June 13-18, 2010, CD-ROM. O’Reilly, A.M., M. Wanielista and N.B. Chang, “Using Multiple Methods to Identify Sequential Biogeochemical Processes beneath a Stormwater Infiltration Basin: Implications for Improved Infiltration BMPs for Groundwater Resource Protection,” Proceedings of the Groundwater Quality Conference: Quality Management in a Rapidly Changing World, Zurich, Switzerland, June 13-18, 2010, CD-ROM. Persaud V., A. Oloufa and M. Abdel-Aty, “Dynamic Speed Monitoring on Sharp Curves utilizing Green Technologies,” Proceedings of the 89th Annual Meeting of the Transportation Research Board, Washington, DC, January 10-14, 2010. Randall, A., B. Zhao and J. Taylor, “Evaluation of Corrosion Inhibitors, Residual, Temperature, and Pipe Materials on Bulk and Biofilm Densities,” Proceedings of the 2010 Florida Section of the

Page 30: 2010 College of Engineering & Computer Science Publications Books

       

30

American Water Works Association Conference, Orlando, FL, November 29 - December 2, 2010, CD-ROM. Randall, A.A., “Contrast of VFA Driven and Inorganic Acid/Base Driven pH Changes Impacting Phosphorus Transformations in EBPR,” Proceedings of the 83rd Annual Water Environment Federation Technical Exhibition and Conference, New Orleans, LA, October 2-6, 2010, CD-ROM.

Saleem, M.A., A. Mirmiran, J. Xia and K.R. Mackie, “Tube-based Composite Deck System for Moveable Bridges,” Proceedings of the Concrete Bridge Conference, Phoenix, AZ, February 24-26, 2010, CDROM. Saleem, M.A., A. Mirmiran, J. Xia and K.R. Mackie, “Alternative Deck Systems for Moveable Bridges,” Proceedings of the ASCE Structures Congress, Orlando, FL, May 12-15, 2010, CDROM.

Saleem, M.A., A. Mirmiran, J. Xia and K.R. Mackie, “Ultra-high Performance Concrete Lightweight Bridge Deck for Moveable Bridges,” Proceedings of 2010 PCI Annual Convention & Bridge Conference and Third International Fib Congress, Washington, DC, May 29-June 2, 2010, CDROM. Slade, R., A.B. Haber and K.R. Mackie, “GFRP Bridge Deck Systems for Skewed Bridges: An Analytical Investigation on Deck Orientation,” Proceedings of the ASCE Structures Congress, Orlando, FL, May 12-15, 2010, CDROM. Xia, J., K.R. Mackie, M.S. Saleem and A. Mirmiran, “System Level Finite Element Analysis of Two Moveable Bridge Deck Systems,” Proceedings of the 2010 Federal Highway Administration Bridge Engineering Conference, Orlando, FL, April 8-9, 2010, CDROM. Young, C., M. Georgiopoulos, T. Crouse, C. Geiger, A. Islas, S.C. Hagen, M. Dagley-Falls, P. Ramsey and P. Lancey, “EXCEL in Mathematics: Applications of Calculus,” Proceedings of the American Society of Engineering Education Annual Conference and Exposition, Mathematics Division, Louisville, KY, June 20-23, 2010. Yun, H.B., S.F. Masri, L.N. Reddi and J.S. Lee, “Data-driven Techniques of Performance-related Monitoring for Geotechnical Structures Subject to Environmental Change,” Proceedings of the 5th World Conference on Structural Control and Monitoring, Tokyo, Japan, July 12-14, 2010. Zaurin, R. and F.N. Catbas, “Computer Vision for Structural Health Monitoring and Damage Detection of Bridges,” Proceedings of the 28th International Modal Analysis Conference, Jacksonville, FL, February 1-4, 2010. Zaurin, R. and F.N. Catbas, “Integration of Computer Imaging and Sensor Networks for Structural Health Monitoring: A Case Study for Load Rating,” Proceedings of the Transportation Research Board Annual Meeting, Washington, DC, January 10-14, 2010. Zaurin, R. and F.N. Catbas, “Structural Health Monitoring for Damage Detection based on Integration of Computer Imaging and Sensor Data,” Proceedings of the International Conference on Bridge Maintenance, Safety and Management, Philadelphia, PA, July 11-15, 2010.

Page 31: 2010 College of Engineering & Computer Science Publications Books

       

31

Computer Science (CS)

Ahmad, A., K. Anna and M. Bassiouni, “Evaluation of Frame Aggregation Schemes for the Persistent based Next Generation WLANS,” Proceedings of the SPIE Conference on Wireless Sensing, Localization, and Processing, Orlando, FL, April 25-29, 2010, pp. 770606.1-770606.6.

Ahmad, M. and R. Guha, “A Measurement Study Determining the Effect of Internet Exchange Points on Popular Webservers,” Proceedings of the 3rd IEEE International Workshop on Wireless and Internet Services, Denver, CO, October 11-14, 2010, pp. 992-998. Ahmad, M. and R. Guha, “Impact of Internet eXchange Points on Internet Topology Evolution,” Proceedings of the 35th Annual IEEE Conference on Local Computer Networks, Denver, CO, October 11-14, 2010, pp. 336- 339. Ahmad, M. and R. Guha, “Studying the Effect of Internet eXchange Points on Internet Link Delays,” Proceedings of the 2010 Spring Simulation Multiconference, Orlando, FL, April 11-14, 2010, pp. 103:1-6.

Ahmad, M. and R. Guha, “Understanding the Impact of Internet Exchange Points on Internet Topology and Routing Performance,” The 6th International Conference on Emerging Networking Experiments and Technologies, Philadelphia, PA, November 30-December 3, 2010, pp. 18:1-18:2. Akbas, M.I. and D. Turgut, “Lightweight Routing with QoS Support in Wireless Sensor and Actor Networks,” Proceedings of the IEEE Global Communications Conference, Exhibition & Industry Forum, Miami, FL, December 6-10, 2010, pp. 1-6. Akbas, M.I., M.R Brust and D. Turgut, “Local Positioning for Environmental Monitoring in Wireless Sensor and Actor Networks,” Proceedings of the IEEE Conference on Local Computer Networks, Denver, CO, October 20-23, 2010, pp. 806-813. Akbas, M.I., M.R. Brust and D. Turgut, “SOFROP: Self-Organizing and Fair Routing Protocol for Wireless Networks with Mobile Sensors and Stationary Actors,” Proceedings of the IEEE Conference on Local Computer Networks, Denver, CO, October 20-23, 2010, pp. 456-463. Anna, K. and M. Bassiouni, “Analysis of the Saturation Throughput and Node Contention Levels in the 802.11 MAC Protocol,” Proceedings of the IEEE Radio and Wireless Symposium, New Orleans, LA, January 10-14, 2010, pp. 609-612.

Anna, K. and M. Bassiouni, “Analytical Model for the P-Persistent 802.11 MAC Protocol in Unequal Load Conditions,” Proceedings of the IEEE International Conference on Computational Intelligence and Communication Networks, Bhopal, India, November 26-28, 2010, pp. 249.1-249.6. Ashraf, N., Y. Shen and H. Foroosh, “View-invariant Action Recognition using Rank Constraint,” Proceedings of the International Conference on Pattern Recognition, Istanbul, Turkey, August 23-26, 2010, pp. 3611-3614. Aslam, B., L. Wu and C.C. Zou. “PwdIP-Hash: A Lightweight Solution to Phishing and Pharming Attacks,” Proceedings of the IEEE International Symposium on Network Computing and Applications, Cambridge, MA, July 15-17, 2010, pp. 198-203.

Page 32: 2010 College of Engineering & Computer Science Publications Books

       

32

Aydin, N., F. Nait-Abdesselam, V. Pryyma and D. Turgut, “Overlapping Clusters Algorithm in Ad hoc Networks,” Proceedings of the IEEE Global Communications Conference, Exhibition & Industry Forum, Miami, FL, December 6-10, 2010, pp. 1-6. Bagherzadeh, M., H. Rajan and G.T. Leavens, “Translucid Contracts for Aspect-oriented Interfaces,” Foundations of Aspect-Oriented Languages Workshop, Rennes, France, March 15, 2010, pp. 5-14. Bhattacharya, S., R. Sukthankar and M. Shah, “A Framework for Photo-Quality Assessment and Enhancement based on Visual Aesthetics,” Proceedings of the ACM International Conference on Multimedia, Firenze, Italy, October 25-29, 2010, pp. 271-280. Bott, J. and J. LaViola, “A Pen-Based Tool for Visualizing Vector Mathematics,” Proceedings of the 7th Eurographics/ACM Symposium on Sketch-based Interfaces and Modeling, Annecy, France, June 7-10, 2010, pp. 103-110.

Bragdon, A., S. Reiss, R. Zeleznik, S. Karumuri, W. Cheung, J. Kaplan, C. Coleman, F. Adeputra and J. LaViola, “Code Bubbles: Rethinking the User Interface Paradigm of Integrated Development Environments,” Proceedings of the ACM/IEEE 32nd International Conference on Software Engineering, Cape Town, South Africa, May 2-8, 2010, pp. 455-464.

Bragdon, A., S. Reiss, R. Zeleznik, S. Karumuri, W. Cheung, J. Kaplan, C. Coleman, F. Adeputra and J. LaViola, “Code Bubbles: A Working Set-based Interface for Code Understanding and Maintenance,” Proceedings of the 28th International Conference on Human Factors in Computing Systems, Atlanta, GA, April 10-15, 2010, pp. 2503-2512. Brahma, S. and M. Chatterjee, “A Bargaining Game for Channel Access in Dynamic Spectrum Access Networks,” Proceedings of the IEEE Global Communications Conference, Exhibition & Industry Forum, Miami, FL, December 6-10, 2010, pp. 1-6. Brahma, S. and M. Chatterjee, “Equilibrium Strategies for Interference Free Channel Access in Cognitive Radio based WRANs,” Proceedings of the 2nd International Conference on Adaptive and Self-adaptive Systems and Applications, Lisbon, Portugal, November 21-26, 2010, pp. 27-32. Brahma, S., M. Chatterjee and K. Kwiat, “Congestion Control and Fairness in Wireless Sensor Networks,” IEEE International Conference on Pervasive Computing and Communications, Mannheim, Germany, March 29-April 2, 2010 pp. 413-418. Brust, M.R., C. Ribeiro, D. Turgut and S. Rothkugel, “LSWTC: A Local Small-world Topology Control Algorithm for Backbone-assisted Mobile Ad Hoc Networks,” Proceedings of the IEEE Conference on Local Computer Networks, Denver, CO, October 10-14, 2010, pp. 144-151. Cazalas, J. and R. Guha, “GEDS: GPU Execution of Continuous Queries on Spatio-Temporal Data Streams,” Proceedings of the 2010 IEEE/IFIP International Conference on Embedded and Ubiquitous Computing, Hong Kong, China, December 11-13, 2010, pp 112-119. Charbonneau E., C.E. Hughes and J.J. LaViola, “Vibraudio Pose: An Investigation of Non-Visual Feedback Roles for Body Controlled Video Games,” Proceedings of the 37th International Conference and Exhibition on Computer Graphics and Interactive Techniques, July 25-29, 2010, Los Angeles, CA, pp. 79-84.

Page 33: 2010 College of Engineering & Computer Science Publications Books

       

33

Cheema, S. and J. LaViola, “Applying Mathematical Sketching to Sketch-Based Physics Tutoring Software,” Proceedings of the 10th International Symposium on Smart Graphics, Banff, Canada, June 24-26, 2010, pp. 13-24. Cheema, S. and J. LaViola, “Towards Intelligent Motion Inferencing in Mathematical Sketching,” Proceedings of the 2010 International Conference on Intelligent User Interfaces, Hong Kong, China, February 7-10, 2010, pp. 289-292. Chertoff, D., B. Goldiez and J. LaViola, “Virtual Experience Test: A Virtual Environment Evaluation Questionnaire,” Proceedings of the IEEE Virtual Reality Conference, Boston, MA, March 20-24, 2010, pp.103-110. D’Ambrosio, D., J. Lehman, S. Risi and K. Stanley, “Evolving Policy Geometry for Scalable Multiagent Learning,” Proceedings of the 9th International Conference on Autonomous Agents and Multiagent Systems, Toronto, Canada, May 10-14, 2010, pp. 731-738.

Dacey, R., R. Heckendorn, L. Carlson and A. Wu, “An Analysis of Conflict Commitment Strategies and the Evolution of Preferences in the Dual Personality Game,” Proceedings of the 2010 International Studies Association Annual Convention: Theory vs. Policy? Connecting Scholars and Practitioners, New Orleans, LA, February 17-20, 2010. Debroy, S. and M. Chatterjee, “Intra-cell Channel Allocation Scheme in IEEE 802.22 Networks,” Proceedings of the IEEE Consumer Communications & Networking Conference, Las Vegas, NV, January 9-12, 2010, pp. 1-6. Dechev, D., P. Pirkelbauer and B. Stroustrup, “Understanding and Effectively Preventing the ABA Problem in Descriptor-based Lock-free Designs,” Proceedings of the 13th IEEE International Symposium on Object/Component/Service-oriented Real-time Distributed Computing, Carmona, Spain, May 5-6, 2010, pp. 171-177. Deo, N., “Finding Communities in Web-like Complex Networks,” Proceedings of the International Conference in Applied Computer Science, Malta, September 15-17, 2010, p. 5. Deo, N., M. Demiralp, M. Stork, E. Milkova, H. Wakamatsu and K. Tchizawa, “Recent Advances in Urban Planning, Cultural Sustainability and Green Development,” Proceedings of the International Conference on Urban Sustainability, Cultural Sustainability, Green Development, Green Structures and Clean Cars, Malta, September 15-17, 2010.

Deo, N., M. Demiralp, M. Stork, E. Milkova, H.Wakamatsu and K. Tchizawa, “Recent Advances in Circuits, Systems, & Signals,” Proceedings of the International Conference on Circuits, Systems and Signals, Malta, September 15-17, 2010. Dubbin, G. and K. Stanley, “Learning to Dance through Interactive Evolution,” Proceedings of the 8th European Event on Evolutionary and Biologically Inspired Music, Sound, Art and Design, Istanbul, Turkey, April 7-9, pp. 331-340. Folsom-Kovarik, J., G. Sukthankar, S. Schatz and D. Nicholson, “Scalable POMDPs for Diagnosis and Planning in Intelligent Tutoring Systems,” Proceedings of the AAAI Fall Symposium on Proactive Assistant Agents, Arlington, VA, November 11-13, 2010, pp. 2-7.

Page 34: 2010 College of Engineering & Computer Science Publications Books

       

34

Folsom-Kovarik, J., G. Sukthankar, S. Schatz and D. Nicholson, “What Information Does This Question Convey? Leveraging Help-seeking for Improved Modeling in a Simulation-based Intelligent Tutor,” Proceedings of the Spring Simulation Multi-Conference, Orlando, FL, April 11-15, 2010, pp. 26:1-8. Furlong, W. and R. Guha, “OFDMA Extension of NS-3 WiMAX Module,” Proceedings of the UKSim 4th European Modeling Symposium on Computer Modeling and Simulation, Pisa, Italy, November 10-12, 2010, pp. 426-431. Gauci, J. and K. Stanley, “Indirect Encoding of Neural Networks for Scalable Go,” Proceedings of the 11th International Conference on Parallel Problem Solving From Nature, Krakow, Poland, September 11-15, 2010, pp. 354-363.

Gupta, P., N. Da Vitoria Lobo and J. LaViola, “Markerless Tracking using Polar Correlation of Camera Optical Flow,” Proceedings of the IEEE Virtual Reality 2010, Boston, MA, March 20-24, 2010, pp. 223-226. Haddad, G., F. Hussain and G. T. Leavens, “The Design of SafeJML, a Specification Language for SCJ with Support for WCET Specification,” Proceedings of the 8th International Workshop on Java Technologies for Real-Time and Embedded Systems, Prague, Czech Republic, August 19-21, 2010, pp. 155-163. Haddad, R. and G. Sukthankar, “A Psychologically-inspired Agent for Iterated Prisoners Dilemma,” Proceedings of the International Conference of the Florida AI Research Society, Daytona Beach, FL, May 19-21, 2010, pp. 2-7. Hastings, E. and K. Stanley, “Interactive Genetic Engineering of Evolved Video Game Content,” Proceedings of the Workshop on Procedural Content Generation in Games at the 5th International Conference on the Foundations of Digital Games, Monterey, CA, June 18, 2010, pp. 8:1-8:4. Ho, Y.H. and K.A. Hua, “Failure-Resilient Vehicular Networks,” Proceedings of the IEEE Conference on Local Computer Networks, Denver, CO, October 10-13, 2010, pp. 340-343. Hoffman, M., P. Varcholik and J. LaViola, “Breaking the Status Quo: Improving 3D Gesture Recognition with Spatially Convenient Input Devices,” Proceedings of the IEEE Virtual Reality 2010, Boston, MA, March 20-24, 2010, pp. 59-66. Hu, H. and X. Li., “Hierarchical Order of Gene Expression Levels,” Proceedings of the International Conference on Bioinformatics and Biomedical Technology, Sichuan, Chengdu, China, April 16-18, 2010, pp. 31-34.

Hu, H. and X. Li., “Whole Genome Identification of Target Genes of Transcription Factors,” Proceedings of the International Conference on Bioinformatics and Biomedical Technology, Sichuan, Chengdu, China, April 16-18, 2010, pp. 27-30. Hua, K.A. and F. Xie, “A Dynamic Stream Merging Technique for Video-on-Demand Services over Wireless Mesh Access Networks,” Proceedings of the IEEE International Conference on Sensor, Mesh and Ad Hoc Communications and Networks, Boston, MA, June 21-25, 2010, pp. 208-216. Hussain, F. and G.T. Leavens, “Temporaljmlc: A JML Runtime Assertion Checker Extension for Specification and Checking of Temporal Properties,” Proceedings of the 8th IEEE International

Page 35: 2010 College of Engineering & Computer Science Publications Books

       

35

Conference on Software Engineering and Formal Methods, Pisa, Italy, September 13-18, 2010, pp. 63-72. Janssen C., H. Adalsteinsson, S. Cranford, D. Dechev, D. Evensky, J. Kenny, N. Lemaster, J. Mayo, A. Pinar and A. Taube, “Exascale Co-design with Sandia's Structural Simulation Toolkit Coarse-grained Components,” Proceedings of the 1st International Workshop on Performance Modeling, Benchmarking and Simulation of High Performance Computing Systems, Supercomputing, New Orleans, LA, November 13-19, 2010, pp. 23-30.

Junejo, I., A. Bhutta and H. Foroosh, “Dynamic Scene Modeling for Object Detection using Single-Class SVM,” Proceedings of the IEEE International Conference on Image Processing, Hong Kong, China, September 26-29, 2010, pp. 1541-1544.

Kalibera, T., P. Parizek, G. Haddad, G.T. Leavens and J. Vitek, “Challenge Benchmarks for Verification of Real-time Programs,” Proceedings of the 4th ACM SIGPLAN Workshop on Programming Languages Meets Program Verification, Madrid, Spain, January 9, 2010, pp. 57-62. Koompairojn, S., K. Hua, K.A. Hua and J. Srisomboon, “Computer-aided Diagnosis of Lumbar Stenosis Conditions,” Proceedings of the Computer-Aided Diagnosis Conference, San Diego, CA, February 13-18, 2010. Laviers, K. and G. Sukthankar, “A Monte Carlo Approach for Football Play Generation,” Proceedings of the AAAI Conference on Artificial Intelligence for Interactive Digital Entertainment, Palo Alto, CA, October 11-13, 2010, pp. 150-155. Laviers, K. and G. Sukthankar, “Identifying and Utilizing Subgroup Coordination Patterns in Team Adversarial Games,” Proceedings of the International Conference on Autonomous Agents and Multi-agent Systems, Toronto, Canada, May 10-14, 2010, pp. 1409-1410. Leavens, G.T., “The Future of Library Specification,” Proceedings of the SDP Workshop on Future of Software Engineering Research, Santa Fe, NM, November 7-11, 2010, pp. 211-216. Leavens, G. T., P. O'Hearn and S.K. Rajmani, “Verified Software: Theories, Tools, Experiments,” Proceedings of the 3rd International Conference on Verified Software: Theories Tools, Experiments, Edinburgh, UK, August 16-19, 2010. Lehman, J. and K. Stanley, “Efficiently Evolving Programs through the Search for Novelty,” Proceedings of the Genetic and Evolutionary Computation Conference, Portland, OR, July 7-11, 2010, pp. 837-844.

Lehman, J. and K. Stanley, “Revising the Evolutionary Computation Abstraction: Minimal Criteria Novelty Search,” Proceedings of the Genetic and Evolutionary Computation Conference, Portland, OR, July 7-11, 2010. Lewis, B., B. Tastan and G. Sukthankar, “Agent-assistance for Multi-robot Control,” Proceedings of the International Conference on Autonomous Agents and Multi-agent Systems, Toronto, Canada, May 10-14, 2010, pp. 1505-1506. Liu, F., G. Hamza-Lup and K.A. Hua, “Using Broadcast to Protect User Privacy in Location-based Applications,” Proceedings of the IEEE Workshop on Web and Pervasive Security, Miami, FL, December 10, 2010, pp. 1561-1565.

Page 36: 2010 College of Engineering & Computer Science Publications Books

       

36

Luo, Y. and L. Bölöni, “Towards a More Accurate Agent-based Multi-lane Highway Simulation,” Proceedings of the International Workshop on Agents in Traffic and Transportation, in conjunction with the 9th Joint Conference on Autonomous and Multi-Agent Systems , Toronto, Canada, May 13, 2010, pp. 13-20. Marinescu, D.C. and L. Bölöni, “Social Network-based Virtual Organizations for Biomedical Research,” Proceedings of the 12th International Conference on E-health Networking, Applications and Services, Lyon, France, July 1-3, 2010, pp. 135-142. Martin G., C.E. Hughes, S. Schatz and D. Nicholson, “The Use of Functional L-Systems for Scenario Generation in Serious Game,” Proceedings of the 2010 Workshop on Procedural Content Generation in Games, Monterey, CA, June 18, 2010. Martin G., S. Schatz, C.E. Hughes and D. Nicholson, “What is a Scenario? Operationalizing Training Scenarios for Automatic Generation,” Proceedings of the Applied Human Factors and Ergonomics Conference, July 17-29, Miami, FL, pp. 746-753.

Martin, G. and C.E. Hughes, “A Scenario Generation Framework for Automating Instructional Support in Scenario-based Training,” Proceedings of the Spring Simulation Multiconference on Military Modeling and Simulation Symposium, Orlando, FL, April 11-15, 2010.

Matthews, P. and C.C. Zou. “Scene Tagging: Image-based CAPTCHA using Image Composition and Object Relationships,” Proceedings of the ACM Symposium on Information, Computer and Communications Security, Beijing, China, April 13-16, 2010, pp. 345-350. McCall, C., B. Maynes, C.C. Zou and N. Zhang, “RMAIS: RFID-based Medication Adherence Intelligence System,” Proceedings of the 32nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Buenos Aires, Argentina, August 31-September 4, 2010, pp. 3768–3771. Mehran, R., B. Moore and M. Shah, “A Streakline Representation of Flow in Crowded Scenes,” Proceedings of the 11th European Conference on Computer Vision: Part III, Crete, Greece, September 5-11, 2010, pp. 439-452. Mesit, J. and R. Guha, “Experimenting with Real Time Simulation Parameters for Fluid Model of Soft Bodies,” Proceedings of the Spring Simulation Multiconference, Orlando, FL, April 11-14, 2010, pp 158:1-158:8. Mesit, J., R. Guha and W. Furlong, “Simulation of Lung Respiration Function using Soft Body Model,” Proceedings of the UKSim 4th European Modeling Symposium on Computer Modeling and Simulation, Pisa, Italy, November 10-12, 2010, pp. 102-107. Miller, A. and J. LaViola, “Towards a Handheld Stereo Projector System for Viewing and Interacting in Virtual Worlds,” Proceedings of the IEEE Symposium on 3D User Interfaces, Boston, MA, March 20-21, 2010, pp. 133-134. Nilpanich, S., K.A. Hua, A. Petkova and Y.H. Ho, “A Lazy Processing Approach to User Relevance Feedback for Content-based Image Retrieval,” Proceedings of the IEEE International Symposium on Multimedia, Taichung, Taiwan, December 13-15, 2010, pp. 342-346.

Page 37: 2010 College of Engineering & Computer Science Publications Books

       

37

Norton, J., C. Wingrave and J. LaViola, “Exploring Strategies and Guidelines for Developing Full Body Video Game Interfaces,” Proceedings of the 5th International Conference on the Foundations of Digital Games, Monterey, CA, June 19-21, 2010, pp. 155-162. Oreifej, O., R. Mehran and M. Shah, “Human Identity Recognition in Aerial Images,” Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition, San Francisco, CA, June 13-18, 2010, pp. 709-716. Petkova, A., K.A. Hua and S. Koompairojn, “Processing Approximate Rank Queries in a Wireless Mobile Sensors Environment,” Proceedings of the International Conference on Mobile Data Management, Kansas City, MO, May 23-26, 2010, pp. 105-114. Pirkelbauer, P., D. Dechev and B. Stroustrup, “Source Code Rejuvenation is not Refactoring,” Proceedings of the 36th International Conference on Current Trends in Theory and Practice of Computer Science, Spindleruv, Czech Republic, January 23-29, 2010, pp. 639-650

Pirkelbauer, P., D. Dechev and B. Stroustrup, “Support for the Evolution of C++ Generic Functions,” Proceedings of the 3rd International Conference on Software Language Engineering, Eindhoven, Netherlands, October 12-13, 2010, pp. 123-142.

Ramirez-Padron, R., F. Batarseh, K. Heyne, A. Wu and A. Gonzalez, “On the Performance of Fitness Uniform Selection for Non-deceptive Problems,” Proceedings of the 48th ACM Southeast Regional Conference, Oxford, MS, April 15-17, 2010, pp. 32:1-32:6. Reilly, V., B. Solmaz and M. Shah, “Geometric Constraints for Human Detection in Aerial Imagery,” Proceedings of the 11th European Conference on Computer Vision, Crete, Greece, September 5-11, 2010, pp. 252-265. Reilly, V., H. Idrees and M. Shah, “Detection and Tracking Large Number of Targets in Wide Area Surveillance,” Proceedings of the 11th European Conference on Computer Vision, Crete, Greece, September 5-11, 2010, pp. 186-199. Risi, S. and K. Stanley, “Indirectly Encoding Neural Plasticity as a Pattern of Local Rules,” Proceedings of the 11th International Conference on Simulation of Adaptive Behavior, Paris, France, August 24-28, 2010, pp. 533-543.

Risi, S., J. Lehman and K. Stanley, “Evolving the Placement and Density of Neurons in the HyperNEAT Substrate,” Proceedings of the Genetic and Evolutionary Computation Conference, New York, NY, July 7-11, 2010, pp. 563-570. Saleemi, I., L. Hartung and M. Shah, “Scene Understanding by Statistical Modeling of Motion Patterns,” Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition, San Francisco, CA, June 13-18, 2010, pp. 2069-2076. Schwartz, A. and F. Gomez, “UCF-WS: Domain Word Sense Disambiguation using Web Selectors,” Proceedings of the 5th International Workshop on Semantic Evaluation, Uppsala, Sweden, July 11-16, 2010, pp. 392-395. Shah, S., G. Sukthankar and C. Usher, “Modeling Group Dynamics in Virtual Worlds,” Proceedings of the International AAAI Conference on Weblogs and Social Media, Washington, DC, May 23-26, 2010, pp. 327-330.

Page 38: 2010 College of Engineering & Computer Science Publications Books

       

38

Shah, S., P. Bell and G. Sukthankar, “A Destination Recommendation System for Virtual Worlds,” Proceedings of the International Conference of Florida AI Research Society, Daytona Beach, FL, May 19-21, 2010, pp. 475-476. Sun, J. and M.F. Tappen, “Context-constrained Hallucination for Image Super-resolution,” Proceedings of the 2010 IEEE Computer Society Conference on Computer Vision and Pattern Recognition, San Francisco, CA, June 13-18, 2010, pp. 231-238.

Szumlanski, S. and F. Gomez, “Automatically Acquiring a Semantic Network of Related Concepts,” Proceedings of the 19th ACM Conference on Information and Knowledge Management, Toronto, Canada, October 26-30, 2010, pp. 19-28. Tang, K., M.F. Tappen, R. Sukthankar and C. Lampert, “Optimizing One-shot Recognition with Micro-Set Learning,” Proceedings of the 2010 IEEE Computer Society Conference on Computer Vision and Pattern Recognition, San Francisco, CA, June 15-17, 2010, pp. 3027-3034. Tanner, J. and F. Gomez, “Extracting Ontological Selectional Preferences for Non-Pertainym Adjectives from the Google Corpus,” Proceedings of the 24th AAAI Conference on Artificial Intelligence, Atlanta, GA, July 11-15, 2010, pp. 1033-1038.

Togelius, J., G. Yannakakis, K. Stanley and C. Browne, “Search-based Procedural Content Generation,” Proceedings of the 2nd European Event on Bio-inspired Algorithms in Games, Istanbul, Turkey, April 7-9, pp. 141-150. Venkataraman, M. and M. Chatterjee, “Case Study of Internet Links: What Degrades Video QoE?” Proceedings of the IEEE Global Communications Conference, Exhibition & Industry Forum, Miami, FL, December 6-10, 2010, pp. 1-6. Verbancsics, P. and K. Stanley, “Transfer Learning through Indirect Encoding,” Proceedings of the Genetic and Evolutionary Computation Conference, New York, NY, July 7-11, 2010, pp. 547-554. Villapol, M. and M. Chatterjee, “Optimal Feedback-based Adaptive WiMax MAC for Improving Quality of Video,” Proceedings of the IEEE Latin America Conference on Communications, Bogota, Columbia, September 15-17, 2010, pp. 1-6. Wang, W., M. Chatterjee and K. Kwiat, “Attacker Detection Game in Wireless Networks with Channel Uncertainty,” Proceedings of the IEEE International Conference of Communications, Cape Town, South Africa, May 23-27, 2010, pp. 1-6. Williamson, B., C. Wingrave and J. LaViola, “RealNav: Exploring Natural User Interfaces for Locomotion in Video Games,” Proceedings of the IEEE Symposium on 3D User Interfaces, Boston, MA, March 20-21, 2010, pp. 3-10. Wingrave, C., J. Rose, T. Langston and J. LaViola, “Early Explorations of CAT: Canine Amusement and Training,” Proceedings of the 28th International Conference Extended Abstracts on Human Factors in Computing Systems, Atlanta, GA, April 10-15, 2010, pp. 2661-2669. Woolley, B. and K. Stanley, “Evolving a Single Scalable Controller for an Octopus Arm with a Variable Number of Segments,” Proceedings of the 11th International Conference on Parallel Problem Solving from Nature, Krakow, Poland, September 11-15, 2010, pp. 270-279.

Page 39: 2010 College of Engineering & Computer Science Publications Books

       

39

Wu, S., B. Moore and M. Shah, “Chaotic Invariants of Lagrangian Particle Trajectories for Anomaly Detection in Crowded Scenes,” Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition, San Francisco, CA, June 13-18, 2010, pp. 2054-2060. Zamir, A.R. and M. Shah, “Accurate Image Localization based on Google Maps Street View,” Proceedings of the 11th European Conference on Computer Vision, Crete, Greece, September 5-11, 2010, pp. 255-268. Zhao, L., X. Wang and G. Sukthankar, “Motif Discovery and Feature Selection for CRF-based Activity Recognition,” Proceedings of the International Conference on Pattern Recognition, Istanbul, Turkey, August 23-26, 2010, pp. 3826-3829.

Zhu, J., K.G.G. Samuel, S. Masood and M.F. Tappen, “Learning to Recognize Shadows in Monochromatic Natural Images,” Proceedings of the IEEE Computer Society Conference on Computer Vision and Pattern Recognition, San Francisco, CA, June 15-17, 2010, pp. 223-230.

Electrical and Computer Engineering (ECE)

Al Hosani, M., Z. Qu and H. Zeineldin, “Development of Current Dynamic Estimator for Islanding Detection of Inverter based Distributed Generation,” Proceedings of the 2010 International Conference on Power System Technology, Hangzhou, China, October 24-28, 2010, pp. 1-8. Al-Hoor, W., J. Abu-Qahouq, L. Huang, W. Mikhael and I. Batarseh, “Analysis and Experimental Results for Improved Multivariable Adaptive Digital Controller,” Proceedings of the 32nd IEEE International Telecommunications Energy Conference, Orlando, FL, June 6-10, 2010, pp. 1-8. Al-Hoor, W., J. Abu-Qahouq, W. Mikhael and I. Batarseh, “Anaysis and Experimental Results for a Multivariable Adaptive Digital Controller,” Proceedings of the 32nd IEEE International Telecommunications Energy Conference, Orlando, FL, June 6-10, 2010, pp.1-8. Aliaj, B., V. Vashchenko, P. Lindorfer, A. Tcherniaev and J. J. Liou, “Study of DeMOS Power Arrays in ESD Operation Regimes,” Proceedings of the 32nd Annual EOS/ESD Symposium, Reno, NV, October 3-8, 2010, pp. 1-8. Alsweiss, S., P. Laupattarakasem, S. El-Nimri, W.L. Jones and S. Hristova-Veleva, “Improved Hurricane Active/Passive Simulated Wind Vector Retrievals,” Proceedings of the IEEE International Geoscience and Remote Sensing Symposium, Honolulu, HI, July 25-30, 2010.

Alsweiss, S., W.L. Jones and P. Laupattarakasem, “An Improved Active/Passive Oceanic Wind Vector Retrieval Technique,” Proceedings of the 11th Specialist Meeting on Microwave Radiometry and Remote Sensing Applications, Washington, DC, March 1-4, 2010, pp. 226-229. Amarin, R., L. Jones, J. Johnson, C. Ruf, T. Miller and S. Chen, “Hurricane Imaging Radiometer Wind Speed and Rain Rate Retrieval: Part-2. Analysis of Retrieval Accuracy,” Proceedings of the 11th Specialist Meeting on Microwave Radiometry and Remote Sensing Applications, Washington, DC, March 1-4, 2010.

Page 40: 2010 College of Engineering & Computer Science Publications Books

       

40

Amarin, R.A., L. Jones, J. Johnson, C. Ruf, T.L. Miller and E. Uhlhorn, “The Hurricane Imaging Radiometer Wide Swath Simulation and Wind Speed Retrievals,” Proceedings of the IEEE International Geoscience and Remote Sensing Symposium, Honolulu, HI, July 25-30, 2010. Amarin, R.A., W.L. Jones, J.W. Johnson, C. Ruf, T. Miller and S. Chen, “Estimates of Hurricane Wind Speed Measurement Accuracy using the Airborne Hurricane Imaging Radiometer,” Proceedings of the 29th Conference on Hurricanes and Tropical Meteor, Tucson, AZ, May10-14, 2010. Batarseh, M.G., E. Shobaki, X. Fang, H. Hu and I. Batarseh, “New Digital Control Technique for Improving Transient Response in DC-DC Converters,” Proceedings of the 13th Euromicro Conference on Digital System Design, Architectures, Methods and Tools, Lille, France, September 1-3, 2010, pp. 793.

Biswas, S.K., L. Jones, S. Khan, J. Gallio and D. Roca, “MWR and WindSat Inter-Satellite Radiometric Calibration Plan,” Proceedings of the 11th Specialist Meeting on Microwave Radiometry and Remote Sensing Applications, Washington, DC, March 1-4, 2010, pp. 266-271. Brian, B., J. Wang, Z. Qu and D. Juul, “Nonlinear Positive Observer Design for Positive Dynamical Systems,” Proceedings of the American Control Conference, Baltimore, MD, June 30-July 02, 2010, pp. 6231-6237. Chen, L., J. Briot, P. Girard, C. Ledesma, M. Solal, K. Cheema, D. Malocha and P. Wahid, “Third Order Nonlinear Distortion of SAW Duplexers in UMTS System,” Proceedings of the 2010 IEEE International Ultrasonics Symposium, San Diego, CA, October 11-14, 2010. Chunyu, J., Z. Qu, E. Pollak and M. Falash, “Reactive Target-tracking Control with Obstacle Avoidance of Unicycle-type Mobile Robots in a Dynamic Environment,” Proceedings of the American Control Conference, Baltimore, MD, June 30-July 02, 2010, pp. 1190-1195. DeMara, R., J. Lee, R. Al-Haddad, R. Oreifej, R. Ashraf, B. Stensrud and M. Quist, “Dynamic Partial Reconfiguration Approach to the Design of Sustainable Edge Detectors,” Proceedings of International Conference on Engineering of Reconfigurable Systems and Algorithms, Las Vegas, NV, July 12-15, 2010, pp. 49-58. El-Nimri, S., L. Jones, E. Uhlhorn, C. Ruf and P. Black, “Hurricane Imaging Radiometer Wind Speed and Rain Rate Retrieval: [Part-1] Development of an Improved Ocean Emissivity Mode,” Proceedings of the 11th Specialist Meeting on Microwave Radiometry and Remote Sensing Applications, Washington, DC, March 1-4, 2010. El-Nimri, S.F., W.L. Jones and S. Ortiz, “An Improved Wideband Ocean Emissivity Radiative Transfer Model,” Proceedings of the IEEE International Geoscience and Remote Sensing Symposium, Honolulu, HI, July 25-30, 2010. Fang, X., K. Nasser, J. Shen and I. Batarseh, “Analysis of Generalized Parallel-series Ultracapacitor Shift Circuits for Energy Storage Systes, Proceedings of the International Conference on Renewable Energy: Generation and Applications, Al Ain, UAE, March 8-10, 2010, pp. 2599-2604. Fang, X., N. Kutkut, J. Shen and I. Batarseh, “Ultracapacitor Shift Topologies with High Energy Utilization and Low Voltage Ripple,” Proceedings of the 2010 International Telecommunications Energy Conference, Orlando, FL, June 6-10, 2010, pp. 1-7.

Page 41: 2010 College of Engineering & Computer Science Publications Books

       

41

Farrar, S., L. Jones, S. Masuelli and J. Gallio, “MicroWave Radiometer (MWR) Oceanic Integrated Rain Rate Algorithm for Aquarius/SAC-D,” Proceedings of the 11th Specialist Meeting on Microwave Radiometry and Remote Sensing Applications, Washington, DC, March 1-4, 2010, pp. 191-195. Fisher, B.H. and D.C. Malocha, “A Study on the Aging of Ultra-thin Palladium Films on SAW Hydrogen Gas Sensors,” Proceedings of the IEEE International Frequency Control Symposium, Newport Beach, CA, June 1-4, 2010, pp. 242-247.

Gallagher, D.R. and D.C. Malocha, “Ultra Wide Band Dual Orthogonal Frequency Coded SAW Correlators using Harmonic Operation,” Proceedings of the IEEE International Frequency Control Symposium, Newport Beach, CA, June 1-4, 2010, pp. 301-306. Gallagher, M.W., B.C. Santos and D.C. Malocha, “Integrated 915MHZ OFC SAW Sensors,” Proceedings of the 11th Annual IEEE Wireless and Microwave Technology Conference, Melbourne Beach, FL, April 12-13, 2010, pp. 1-4. Gallagher, M.W., B.C. Santos and D.C. Malocha, “Wireless Wideband SAW Sensor-antenna Design,” Proceedings of the IEEE International Frequency Control Symposium, Newport Beach, CA, June 1-4, 2010, pp. 291-296. Gil, C., M. Haralambous, Z. Qu and M.A. Simaan, “An Optimal Control Approach for Determination of the Heat Loss Coefficient in a Domestic Water Heating System,” Proceedings of the American Control Conference, Baltimore, MD, June 30-July 02, 2010, pp. 3549-3554. Gopalan, K., S. Biswas, L. Jones, S. Bilanow and T. Wilheit, “A Time-varying Radiometric Bias Correction for the TRMM Microwave Imager and Inter-Satellite Radiometric Calibration with WindSat and SSMI,” Proceedings of the 11th Specialist Meeting on Microwave Radiometry and Remote Sensing Applications, Washington, DC, March 1-4, 2010.

Hanna, R., W.L. Jones and T. Kasparis, “Evaluation of QuikSCAT Radiometer (QRad) Brightness Temperatures using WindSat,” Proceedings of the 11th Specialist Meeting on Microwave Radiometry and Remote Sensing Applications, Washington, DC, March 1-4, 2010. Hazlett, R., D. Kim, H. Godfrey, J. Bricout and A. Behal, “Exploring Learning Heuristics for Adopting New Technology to Assist with Activities of Daily Living (ADL): Results of Qualitative Analysis using Nvivo 8 Software,” Proceedings of the 2010 Florida Conference on Recent Advances in Robotics, Jacksonville, FL, May 20-21, 2010. Hung, V., A. Gonzalez and R.F. DeMara, “Dialog Management for Rapid-prototyping of Speech-based Training Agents,” Proceedings of the Interservice/Industry Training, Simulation & Education Conference, Orlando, FL, November 29-December 2, 2010, pp. 10343.1-11. Hunter, M.T., C.D. Ziomek, A. Kourtellis and W. Mikhael, “Fundamental of Modern Spectral Analysis,” Proceedings of the IEEE Autotestcon, Orlando, FL, September 13-16, 2010, pp. 1-5. Hussein, A.H., S. Harb, N. Kutkut, J. Shen and I. Batarseh, “Design Considerations for Distributed Micro-storage Systems in Residential Applications,” Proceedings of the 32nd International Telecommunications Energy Conference, Orlando, FL, June 6-10, pp. 1-6.

Page 42: 2010 College of Engineering & Computer Science Publications Books

       

42

Jessie, Y., C. Chen, M.J. Barnes and Z. Qu, “RoboLeader: An Agent for Supervisory Control of Multiple Robots,” Proceedings of the 5th ACM/IEEE International Conference on Human-Robot Interaction, March 2-5, 2010, Osaka, Japan, pp. 81-82. Jia, H., J. Lu, X. Wang, K. Padmanabhan, P. Shea and Z.J. Shen, “Package Level Integration of a Monolithic Buck Converter Power IC and Bondwire Magnetics,” Proceedings of the 22nd International Symposium on Power Semiconductor Devices and ICs, Hiroshima, Japan, June 6-10, 2010, pp. 51-54. Jia, H., O. Abdel-Rahman, K. Padmanabhan, P. Shea, I. Batarseh and J. Shen, “MHz-frequency Operation of Flyback Converter with Monolithic Self-synchronized Rectifier (SSR),” Proceedings of the 32nd IEEE International Telecommunications Energy Conference, Orlando, FL, June 6-10, 2010, pp.1-6. Jin, S. and Z. Qu, “Pursuit-evasion Games with Multi-Pursuer vs. One Fast Evader,” Proceedings of the 8th World Congress on Intelligent Control and Automation, Jinan, China, July 6-9, 2010, pp. 3184-3189.

Junek, W.N., W.L. Jones and M.T. Woods, “Temporal Analysis of the Magma Supply System beneath the Okmok Caldera by Interferometric Synthetic Aperature Radar and Statistical Seismology,” Proceedings of the IEEE International Geoscience and Remote Sensing Symposium, Honolulu, HI, July 25-30, 2010. Khraisha R. and J. Lee, “A Scalable H.264/AVC Deblocking Filter Architecture using Dynamic Partial Reconfiguration,” Proceedings of the IEEE International Conference on Acoustics, Speech, and Signal Processing, Dallas, TX, March 14-19, 2010, pp. 1566-1569. Kim, D.J., R. Hazlett, H. Godfrey, G. Rucks, D. Portee, J. Bricout, T. Cunningham and A. Behal, “On the Relationship between Autonomy, Performance, and Satisfaction: Lessons from a Three-week User Study with Post-SCI Patients using a Smart 6DOF Assistive Robotic Manipulator,” Proceedings of the 2010 IEEE International Conference on Robotics and Automation, Anchorage, AK, May 3-8, 2010, pp. 217-222. Kozlovski, N.Y. and D.C. Malocha, “Multi-track Low-loss SAW Tags with Flexible Impedance Matching for Passive Wireless Sensor Applications,” Proceedings of the IEEE International Frequency Control Symposium, Newport Beach, CA, June 1-4, 2010, pp. 279-286.

Laupattarakasem, P., S. Alsweiss, S. El-Nimri, W.L. Jones, S. Veleva, B. Stiles, E. Rodriguez and R. Gaston, “Improved High Wind Speed Retrievals using AMSR and the Next Generation NASA Dual Frequency Scatterometer,” Proceedings of the 11th Specialist Meeting on Microwave Radiometry and Remote Sensing Applications, Washington, DC, March 1-4, 2010, pp. 134-139. Li, C., Z. Qu, A. Das and F.L. Lewis, “Cooperative Control with Improvable Network Connectivity,” Proceedings of the American Control Conference, Baltimore, MD, June 30-July 2, 2010, pp. 87-92. Lin, W., Z. Qu and M.A. Simman, “A Design of Distributed Nonzero-sum Nash Strategies,” Proceedings of the 49th IEEE Conference on Decision and Control, Atlanta, GA, December 15-17, 2010, pp. 6305-6310. Liou, J. J., “ESD: A Spoiler to Development of Next-generation Technologies?,” Proceedings of the IEEE International Conference on Electron Devices and Solid-State Circuits, Hong Kong, China, December 15-18, 2010, pp. 1-3.

Page 43: 2010 College of Engineering & Computer Science Publications Books

       

43

Liou, J.J., “ESD Challenges in Modern and Future Integrated Circuits,” Proceedings of the IEEE ANDESCON: Green Technologies for a Better World, Bogota, Columbia, September 15-17, 2010. Liu, W. and J.J. Liou, “Characterization of Nanowire Field-effect Transistors Subject to ESD Stresses,” Proceedings of the 17th IEEE International Symposium on Physical and Failure Analysis of Integrated Circuits, Singapore, July 5-9, 2010, pp.1-5. Liu, Y., R. Ranganathan, M.T. Hunter, W.B. Mikhael and T.T. Yang, “Optimal Block Adaptive I/Q Mismatch Compensation based on Circuilarity,” Proceedings of the IEEE International Midwest Symposium on Circuits and Systems, Seattle, WA, August 1-4, 2010, pp. 320-323. Malobabić, S., D.F. Ellis, J.A. Salcedo, P. Zhou, J.J. Hajjar and J.J. Liou, “A New ESD Design Methodology for High Voltage DMOS Applications,” Proceedings of the 32nd Annual EOS/ESD Symposium, Reno, NV, October 3-8, 2010, pp. 1-10.

Malocha, D.C., “Orthogonal Frequency Coded SAW Multi-sensor System with Large Range,” Proceedings of the Joint China-Japan International Workshop on Acoustic Wave Devices, Beijing, China, November 3-5, 2010, pp. 25-30. Malocha, D.C., “SAW/BAW Acoustoelectronic Technology for Filters and Communication Systems,” Proceedings of the 11th Annual IEEE Wireless and Microwave Technology Conference, Melbourne Beach, FL, April 12-13, 2010, pp. 1-7. Malocha, D.C., N. Kozlovski, M. Gallagher, N. Saldanha and D. Gallagher, “Spread Spectrum Wireless Passive Surface Acoustic Wave Sensor System,” Proceedings of the Joint China-Japan International Workshop on Acoustic Wave Devices, Beijing, China, November 3-5, 2010, pp. 25-30. Massi, L., M. Georgiopoulos, C. Young, A. Ducharme, C. Ford, K. Small, P. Lancey and D. Bhati, “YES: An NSF S-STEM Scholarship Program Experience at the University of Central Florida,” Proceedings of the 2010 ASEE Annual Conference and Exposition, Louisville, KY, June 20-23, 2010. Miller, T.L., R. Amarin, R. Atlas, M.C. Bailey, P.G. Black, C.D. Buckley, M.W. James, J.W. Johnson, W.L. Jones, C.S. Ruf, D.E. Simmons and E. Uhlhorn, “Capabilities and Impact on Wind Analyses of the Hurricane Imaging Radiometer,” Proceedings of the IEEE International Geoscience and Remote Sensing Symposium, Honolulu, HI, July 25-30, 2010.

Miller, T.L., R. Atlas, P.G. Black, C. Buckley, S.S. Chen, L. Jones, C.S. Ruf, E.W. Uhlhorn, J. Gamache, R. Amarin, S. Al-Nimri, T.N. Krishnamurti and C. Inglish, “Simulation of the Impact of New Aircraft- and Satellite-based Ocean Surface Wind Measurements on Wind Analyses and Numerical Forecasts,” Proceedings of the American Meteorological Society Annual Meeting, Atlanta, GA, January 17-21, 2010. Naiel, M., M.M. Abdelwahab and W.B. Mikhael, “Human Action Recognition Employing TD2DPCA and VQ,” Proceedings of the 53th IEEE International Midwest Symposium on Circuits and Systems, Seattle, WA, August 1-4, 2010, pp. 624-627. Naiel, M., M.M. Abdelwahab and W.B. Mikhael, “Human Action Recognition Employing PCA and VQ in the Spatio-temporal Domain,” Proceedings of the 8th International IEEE-NEWCAS Conference, Montreal, Canada, June 20-23, 2010, pp. 381-384.

Page 44: 2010 College of Engineering & Computer Science Publications Books

       

44

Palaniappan, R. and P. Wahid, “Target Location and Tracking using Hybrid Sensor Networks,” Proceedings of the 4th European Conference on Antennas and Propagation, Barcelona, Spain, April 12-16, 2010, pp. 1-4. Pavlina, J.M. and D.C. Malocha, “Chipless RFID SAW Sensor System-level Simulator,” Proceedings of the IEEE International Conference on RFID, Orlando, FL, April 14-16, 2010, pp. 252-259. Pittner, J. and M.A. Simaan, “Controller for Improving the Quality of the Tandem Rolling of Hot Metal Strip, Proceedings of the American Control Conference, Baltimore, MD, June 30-July 2, 2010, pp. 6095 - 6100. Pittner, J. and M.A. Simaan, “Quality Improvement of Tandem Hot Metal Strip Rolling using an Augmented State-dependent Riccati Equation Technique,” Proceedings of the 49th IEEE Conference on Decision and Control, Atlanta, GA, December 15-17, 2010, pp. 5180-5185. Puklavage, C., A. Pirela, A.J. Gonzalez and M. Georgiopoulos, “Imitating Personalized Expressions through an Avatar using Machine Learning,” Proceedings of the 23rd International Florida Artificial Intelligence Research Society Conference, Daytona Beach, FL, May 19-21, 2010, pp. 68-73. Qian, Z., O. Abdel-Rahman, H. Hu and I. Batarseh, “A Zero-voltage Switching Four-port Integrated DC/DC Converter,” Proceedings of the 32nd IEEE International Telecommunications Energy Conference, Orlando, FL, June 6-10, 2010, pp.1-8. Qian, Z., O. Abdel-Rahman, H. Hu, and I. Batarseh, “Small Signal Modeling of a Compound Half-bridge DC/DC Converter for Renewable Energy Applications,” Proceedings of the 32nd IEEE International Telecommunications Energy Conference Orlando, FL, June 6-10, 2010, pp. 1-7. Qu, Z., “Cooperative Control of Networked Nonlinear Systems,” Proceedings of the 49th IEEE Conference on Decision and Control, Atlanta, GA., December 15-17, 2010, pp. 3200-3207. Ramirez-Padron, R., D. Foregger, J. Manuel, M. Georgiopoulos and B. Mederos, “Similarity Kernels for Nearest Neighbor-based Outlier Detection,” Proceedings of the 9th International Symposium on Intelligent Data Analysis, Tucson, AZ, May 19-21, 2010, pp. 157-170 Ranganathan, R., W. Mikhael, N. Kutkut and I. Batarseh, “Adaptive Sun Tracking Algorithm for Incident Energy Maximization and Efficiency Improvement of PV Panels,” Proceedings of the 2nd Annual Florida Energy Systems Consortium Summit, Orlando, FL, September 28-29, 2010.

Ranganathan, R., W.B. Mikhael, N. Kutkut and I. Batarseh, “Novel Adaptive Sun Tracking Algorithm for Energy Maximization and Efficiency Improvement of PV Panels,” Proceedings of the International Conference on Renewable Energy: Generation and Applications, Al Ain, UAE, March 8-10, 2010. Rolinski, N.E., Q. Leland, E. Gregory, B. Jordan, D. Woodburn and T. Wu, “Dynamic Testing of Electromechanical Actuators using Time-history Data,” Proceedings of the SAE Power Systems Conference, Ft. Worth, TX, November 2-4, 2010. Sehrish, S., G. Mackey, J. Wang and J. Bent, “MRAP: A Novel Map Reduce-based Framework to Support HPC Analytics Applications with Access Patterns,” Proceedings of the ACM International Symposium on High Performance Distributed Computing, Chicago, IL, June 20-25, 2010, pp. 107-118.

Page 45: 2010 College of Engineering & Computer Science Publications Books

       

45

Simaan, M.A., “Patient Adaptive Feedback Control of Rotary Left Ventricle Assist Devices,” Proceedings of the 2010 NSF ECCS Grantee’s Conference, Honolulu, HI, November 30-December 3, 2010. Snyder, M.G., Z. Qu, J.Y.C. Chen and M.J. Barnes, “RoboLeader for Reconnaissance by a Team of Robotic Vehicles,” Proceedings of the 2010 International Symposium on Collaborative Technologies and Systems, Chicago, IL, May 17-20, 2010, pp. 522-530. Tian, F., F. Chen, K. Rustom and I. Batarseh, “Pulse Frequency Modulation with Soft-switching Flyback Single-stage Inverter,” Proceedings of the 2010 International Telecommunications Energy Conference, Orlando, FL, June 6-10, pp. 1-6. Wang, J., Z. Qu and M. Obeng, “A Distributed Cooperative Steering Control with Application to Nonholonomic Robots,” Proceedings of the 49th IEEE Conference on Decision and Control, Atlanta, GA, December 15-17, 2010, pp. 4571-4576.

Wang, Z., D.J. Kim and A. Behal, “An Optimization-based Approach for Design and Analysis of Stable 2.5D Visual Servoing under Sensor and Actuator Constraints,” Proceedings of the 2010 IEEE Conference on Decision and Control, Atlanta, GA, December 15-17, 2010, pp. 1650-1655. Wang, Z., J. Chen and A. Behal, “Robust Adaptive Control Design for a Class of Uncertain MIMO Nonlinear Systems,” Proceedings of the IEEE Multi-conference on Systems and Control, Yokohama, Japan, September 8-10, 2010, pp. 2284-2289. Wilson, W.C., M.D. Rogge, B. Fisher, D.C. Malocha and G.M. Atkinson, “SAW Sensor for Fastener Failure Detection,” Proceedings of the 9th Annual Conference on Sensors, November 1-4, 2010, pp. 2307-2310. Woodburn, D., T. Wu, L. Chow, Q. Leland, J. Bindl, Y. Hu, L. Zhou, Y. Lin, N. Rolinski, W. Brokaw, B. Tran, B. Jordan, E. Gregory, S. Lin and S. Iden, “Integrated Nonlinear Dynamic Modeling and Field Oriented Control of Permanent Magnet (PM) Motor for High Performance EMA,” Proceedings of the SAE Power Systems Conference, Ft. Worth, TX, November 2-4, 2010. Woodburn, D., T.X. Wu, L. Chow, Q. Leland, W. Brokaw, J. Bindle, N. Rolinski, Y. Lin, L. Zhou and B. Jordan, “Dynamic Heat Generation Modeling of High Performance Electromechanical Actuator,” Proceedings of the AIAA Annual Conference, Orlando, January 4-7, 2010. Young, C., M. Georgiopoulos, T. Crouse, C. Geiger, A. Islas, S. Hagen, M. Dagley-Falls, P. Ramsey and P. Lancey, “EXCEL in Mathematics: Applications of Calculus,” Proceedings of the 2010 ASEE Conference and Exposition, Louisville, KY, June 20-23, 2010. Yusuf, Y. and X. Gong, “A New Class of 3-D Filter/Antenna Integration with High Quality Factor and High Efficiency,” Proceedings of the 2010 IEEE MTT-S International Microwave Symposium, Anaheim, CA, May 23-28, 2010, pp. 892-895. Zhang, J. and J. Wang, “The Cost of Cloud based Scientific Data Sharing,” Proceedings of the IEEE International Workshop on Digital Computing Infrastructure and Applications in conjunction with the 16th IEEE International Conference on Parallel and Distributed Systems, Shanghai, China, December 8-10, 2010.

Page 46: 2010 College of Engineering & Computer Science Publications Books

       

46

Zhang, Q., O. Abdel-Rahman, J. Shen and I. Batarseh, “A New Digital Controller for a Single Stage Bi-Flyback PFC Converter,” Proceedings of the 32nd IEEE International Telecommunications Energy Conference, Orlando, FL, June 6-10, 2010, pp. 1-5.

Zhengkai, W and J. Wang, “Power Control by Distribution Tree with Classified Power Capping in Cloud Computing,” Proceedings of the International Symposium on Energy-aware Computing and Networking in conjunction with the IEEE/ACM International Conference on Green Computing and Communications, HangZhou, China, December 18-20, 2010, pp. 319-324. Zhijun, Q., O. Abdel-Rahman, C. Hamilton, I. Batarseh and M. Batarseh, “An Integrated Four-port Converter for Compact and Efficient Hybrid Power Systems,” Proceedings of the IEEE International Symposium on Circuits and Systems, Paris, France, May 30-June 2, 2010, pp. 2207-2210. Zhou, L., Q. Leland, E. Gregory, W. Brokaw, L. Chow, Y. Lin, J. Bindl, Y. Hu, T. Wu, B. Tran, D. Woodburn, B. Jordan and N. Rolinski, “Lumped Node Thermal Modeling of EMA with FEA Validation,” Proceedings of the SAE Power Systems Conference, Ft. Worth, TX, November 2-4, 2010.

Zhou, Y., J.J. Hajjar, A. Olney, D. Ellis and J.J. Liou, “A New Method to Evaluate Effectiveness of CDM ESD Protection,” Proceedings of the 32nd Annual EOS/ESD Symposium, Reno, NV, October 3-8, 2010, pp. 1-8.

Industrial Engineering and Management Systems (IEMS)

Ahram, T.Z., W. Karwowski and B. Amaba, “User-centered Systems Engineering & Knowledge Management Framework for Design & Modeling of Future Smart Cities,” Proceedings of the 54th Annual Meeting of the Human Factors and Ergonomics Society, San Francisco, CA, September 27-October 1, 2010, pp. 1752-1756.

Eskandari, H., M. Darayi and C.D. Geiger, “Using Simulation Optimization as a Decision Support Tool for Supply Chain Coordination with Contracts,” Proceedings of the 2010 Winter Simulation Conference, Baltimore, MD, December 5-8, 2010, pp. 1306-1317.

Jeffrey, M.M., R.J. Butler and C.D. Geiger, “Generating Effective Production and Inventory Control Policies using an Exponentially Weighted Moving Average Control Chart,” Proceedings of the IEEE International Conference on Industrial Engineering and Engineering Management, Macao SAR, China, December 7-10, 2010, CD-ROM.

Karwowski, W., T.Z. Ahram and B. Amaba, “Human-centered Systems Engineering Applications in Service Systems,” Proceedings of the 5th IEEE International Conference on System of Systems Engineering, Loughborough University, UK, June 22-24, 2010, pp. 22-24.

Khalafallah, A., A. Elshennawy, N. Yousef and M. Abdel-Raheem, “Evaluating Contractor Quality Control under Material and Non-Material Models,” Proceedings of the 6th International Conference on Innovations in Architecture, Engineering, and Construction, Penn State University, PA, June 9-11, 2010, pp. 876-885.

Khalafallah, A., N. Yousef, A. Elshennawy and M. Abdel-Raheem, “Cost Effectiveness and Risks of Outsourcing Quality Control Verification for Highway Projects,” Proceedings of Engineering Project Organizations Conference, South Lake Tahoe, CA, November 4-7, 2010.

Page 47: 2010 College of Engineering & Computer Science Publications Books

       

47

Lasrado, V. and D. Nazzal, “Impact of Variability on System Performance for Conveyor-based Material Handling,” Proceedings of the 2010 International Material Handling Research Colloquium, Milwaukee, WI, June 21-25, 2010, pp. 328-337. Meza, K. and L. Crumpton-Young, “The Identification of User Centered Design Factors Required for Products Intended for Extreme Environments,” Proceedings of the 40th International Conference on Environmental Systems, Barcelona, Spain, July 11-15, 2010. Millan, A. and L. Crumpton-Young, “Characterization and Modeling of Acute Stress under Dynamic Task Conditions,” Proceedings of the 40th International Conference on Environmental Systems, Barcelona, Spain, July 11-15, 2010. Nguyen, L., L. Malone, J. Rolland and L. Keeler, “Direct Interaction with Virtual Objects,” Proceedings of the 2010 Interservice/Industry Training, Simulation and Education Conference, Orlando, FL, November 29-December 2, 2010, CD-ROM.

Pastrana, J., M. Marin, M. Helal and L. Rabelo, “Hierarchical Scheduling,” Proceedings of the 2010 Winter Simulation Conference, Baltimore, MD, December 5-8, 2010, CD-ROM. Sepúlveda, J., F. Ramis, L. Neriz and P. Concha, “The Benefits of a Library of Ready-made Simulation Objects: A Comparison of Process-oriented Versus Object-oriented Healthcare Simulation,” Proceedings of the 2010 Industrial Engineering Research Conference, Cancún, Mexico, June 5-9, 2010, CD-ROM. Sepúlveda, J., F. Ramis, L. Neriz and R. Mateo, “Using Object Oriented Simulation to Study Healthcare Units,” Proceedings of the Society for Health Systems & American Society for Quality Conference and Exposition, Atlanta, GA, February 25-28, 2010, CD-ROM. Soyler, A. and S. Sala-Diakanda, “A Model-based Systems Engineering Approach to Capturing Disaster Management Systems,” Proceedings of the IEEE International Systems Conference, San Diego, CA, April 5-8, 2010, pp. 283-287. Thiraviam, A., R. Jazowski and L. Malone, “Bridging the Gap: Accelerated Degradation Testing of Engineering Plastics and their use in Predicting Reliability of Components under Subsea Pressure,” Proceedings of the IEEE Accelerated Stress Testing and Reliability Workshop, Denver, CO, October 8, 2010, CD-ROM.

Thiraviam, A., T. Foley and L. Malone, “Development of an Acceleration Model for Subsea Pressure,” Proceedings of the Reliability and Maintainability Symposium, San Jose, CA, January 25, 2010, pp. 1-6. Thompson, W. and J.L. Cox, “Boomers and Millenials: Workplace Ergonomic Challenges,” Proceedings of the 60th Annual IIE Conference and Expo, Cancun, Mexico, June 5-9, 2010, CD-ROM. Zhu, Y., M. Marin, L. Andrade, E. Atencio and L. Rabelo, “Hybrid Modeling and Supply Chain Management,” Proceedings of the 2010 Winter Simulation Conference, Baltimore, MD, December 5-8, 2010, CD-ROM.

Page 48: 2010 College of Engineering & Computer Science Publications Books

       

48

Mechanical, Materials and Aerospace Engineering (MMAE)

Allen, R., K. Lin and C. Xu, “Robust Estimation of a Maneuvering Target from Multiple Unmanned Air Vehicles' Measurements,” Proceedings of the 2010 International Symposium on Collaborative Technologies & Systems, Lombard, IL, May 17-21, 2010.

Aminimanesh, N., S. Basu and R. Kumar, “Modeling of a Reacting Nanofilm on a Composite Substrate,” Proceedings of the 8th Asia-Pacific Conference on Combustion, Hyderabad, India, December 10-13, 2010, pp. SD1002. Armor, E., N. Orlovskaya, N. Lugovy and M. Springer, “Boron Carbide/Boron Carbide-Carbon Nanofibers Laminate with Weak Interfaces,” Proceedings of the NATO Advanced Research Workshop on Boron Rich Solids: Sensors for Biological and Chemical Detections, Ultra High Temperature Ceramics, Thermoelectrics, Armor, Orlando, FL, December 14-18, 2010, pp. 1-12.

Barmak K., T. Sun, K.R. Coffey, E. Zschech, P.S. Ho and S. Ogawa, “Impact of Surface and Grain Boundary scattering on the Resistivity of Nanometric Cu Inter-connects,” Proceedings of the 19th Australian Institute of Physics Congress, Melbourne, Australia, December 5-9, 2010, pp. 130012-22.

Benafan, O., W. Notardonato, B.J. Meneghelli and R. Vaidyanathan, “Design, Implementation and Testing of a Variable Length Heat Pipe Switch NitiFe Helical Actuators for Thermal Management on the Lunar Surface,” The International Conference on Shape Memory and Superelastic Technologies, Pacific Grove, CA, May 16-20, 2010, pp. 96.

Bonadies, M., M. Mohagheghi, M. Ricklick and J.S. Kapat, “Solar Retrofit to Combined Cycle Plant with Thermal Energy Storage,” Proceedings of the ASME Turbo Expo 2010: Power for Land, Sea and Air, Glasgow, UK, June 14-18, 2010, pp. GT2010-23685.

Bonadies, M., M. Ricklick and J.S. Kapat, “Improving the Thermal Conductivity of a Phase Change Thermal Energy Storage Unit,” Proceedings of the 14th International Heat Transfer Conference, Washington, DC, August 8-13, 2010, pp. IHTC14-22984.

Bonadies, M., S.H. Ho and J.S. Kapat, “Evaluating Computational Fluid Dynamics Modeling of a Thermal Storage Unit,” Proceedings of the ASME 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, Montreal, Canada, August 1-5, 2010. Bonadies, M., S.H. Ho and J.S. Kapat, “Numerical and Analytical Simulation of a Thermal Storage Unit for Building Hot Water,” Proceedings of the 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Nashville, TN, July 25-18, 2010.

Brennan S., A.P. Warren, K.R. Coffey, Y.H. Sohn, N. Kulkarni and P. Todd, “Impurity Diffusion Studies of Aluminum in Magnesium,” Proceedings of the 139th TMS Annual Meeting & Exhibition, February 14-18, 2010, pp. 537-538.

Claretti, R., M. Ricklick and J.S. Kapat, “Heat Transfer Characteristics of a Double Wall Cooling Scheme at Small and High Impingement Heights,” Proceedings of the 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Nashville, TN, July 25-18, 2010.

Page 49: 2010 College of Engineering & Computer Science Publications Books

       

49

Coronado P. and M. Ilie, “DDES of Shock Wave/turbulent Boundary Layer Interaction,” Proceedings of the 63rd Annual Meeting of Division of Fluid Dynamics, Long Beach, CA, November 21-23, 2010, pp. 309.

DeMarco, J.P., C.M. Stewart, E. Hogan and A.P. Gordon, “An Efficient Method for the Optimization of Viscoplastic Constitutive Model Constants,” Proceedings of the ASME Turbo Exposition, Glasgow, UK, June 14-18, 2010.

Divo, E., A. Kassab, G. Mendez, I.R. Argueta-Morales and W. DeCampli, “CFD Case Study to Optimize Surgical Adjustment of Ventricular Assist Device Implantation to Minimize Stroke Risk. Part II: Towards Transient Multiscale Modeling,” Proceedings of the International Conference on Computational & Experimental Engineering and Sciences, Las Vegas, NV, March 28 - April 1, 2010.

Donohue, M., C. Carpenter and N. Orlovskaya, “Vibrational Properties of Zr(Hf)B2-SiC UHTC Composites by Micro-Raman Spectroscopy,” Proceedings of the NATO Advanced Research Workshop on Boron Rich Solids: Sensors for Biological and Chemical Detections, Ultra High Temperature Ceramics, Thermoelectrics, Armor, Orlando, FL, December 14-18, 2010, pp. 287-302.

Ewh, A., E. Perez, D.D. Keiser, Jr. and Y.H. Sohn, “Characterization of Interaction Layer in U-Mo-X (X = Nb, Ti, Zr) vs. Al Diffusion Couples Annealed at 600°C for 10 hours,” Proceedings of the 6th International Conference on Diffusion in Solids and Liquids, Paris, France, July 5-7, 2010.

Freihofer, G., A. Jimenez and S. Raghavan, “Optical Spectra of Carbon Nanotubes for Stress Measurements of Aerospace Structures,” Proceedings of the 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Orlando, FL, April 12-15, 2010.

Geng, X., D. Jeffcoat and Y. Xu, “Interaction Reduction and Consensus for Multi-Agent Systems,” Proceedings of the 2010 American Control Conference, Baltimore, MD, June 30-July 2, 2010.

Gou, J., F. Liang, Y. Tang and J. Kapat, “Multifunctional Nanocomposites for Offshore Wind Energy,” Proceedings of the 20th International Offshore (Ocean) and Polar Engineering Conference, Beijing, China, June 20-26, 2010.

Gou, J., F. Liang, Y. Tang, K.C. Lin, C. Ham and Y.H. Joo, “Multifunctional Nanocomposites for Offshore Wind Turbine Blades: Materials, Processing and Performance,” Proceedings of the 29th ASME International Conference on Ocean, Offshore and Arctic Engineering, Shanghai, China, June 6-11, 2010, pp. 349-352.

Gu, X., S. Basu and R. Kumar, “Numerical Simulation of Atomized Biofuel and Conventional Fuel Dispersion and Vaporization in a Crossflow Premixer,” Proceedings of the 8th Asia-Pacific Conference on Combustion, Hyderabad, India, December 10-13, 2010, pp. SD1001.

Idahosa, U., A. Saha, S. Basu and C. Xu, “Acoustic Perturbation Effects on the Fluid Dynamics and Swirling Flame Response in a Non-Premixed Co-flow Burner,” Proceedings of the ASME Turbo Expo – Gas Turbine Technical Congress & Exposition, Glasgow, UK, June 14-18, 2010.

Ilie, M., “Active Flow Control Technique for the Reduction of Helicopter BVI Noise; a Numerical Study using Large-Eddy Simulation,” Proceedings of the 16th AIAA/CEAS Aeroacoustics Conference, Stockholm, Sweden, June 7-9, 2010, pp. AIAA-2010-3871.

Page 50: 2010 College of Engineering & Computer Science Publications Books

       

50

Ilie, M., “Active Flow Control Technique for the Reduction of Helicopter BVI Noise: A Numerical Study Using LES,” Proceedings of the 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, FL, January 4-7, 2010, pp. AIAA-2010-1411.

Ilie, M., “Aerodynamic Aspects of Helicopter Maneuvers; Numerical Studies using LES,” Proceedings of the 28th AIAA Applied Aerodynamics Conference, Chicago, IL, June 28-1, 2010, pp. AIAA-2010-4555.

Ilie, M., “Aerodynamic Aspects of Icing Effect on the Helicopter BVI Phenomenon; Numerical Studies using LES,” Proceedings of the 28th AIAA Applied Aerodynamics Conference, Chicago, IL, June 28-July1, 2010, pp. AIAA-2010-4233.

Ilie, M., “Critical Aspects in the Aerodynamics of Helicopter Blade-vortex Interaction: A Numerical Study using LES,” Proceedings of the 48th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, FL, January 4-7, 2010, pp. AIAA-2010-677.

Ilie, M., “Experimental and Numerical Studies of Active Flow Control Technique for the Reduction of Helicopter BVI Noise,” Proceedings of the 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, FL, January 4-7, 2011, pp. AIAA-2011-1183.

Ilie, M., “Experimental Studies of Tip-vortex Formation; Influence of Blade-tip Geometry on the Vortex Characteristics,” Proceedings of the 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, FL, January 4-7, 2011, pp. AIAA-2011-1253.

Ilie, M., “Icing Effect on the Aerodynamics of Wind Turbines: A Numerical Study using LES,” Proceedings of the 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, April 12-15, 2010, pp. AIAA-2010-2655.

Ilie, M., “Large-eddy Simulation of Swirling Reacting Flows,” Proceedings of the American Physical Society March Meeting, Portland, OR, March 15–19, 2010, pp. 19.

Ilie, M., “LES Studies of Helicopter Blade-Vortex Mechanism of Interaction: The Icing Effect,” Proceedings of the 48th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, FL, January 4-7, 2010, pp. AIAA-2010-680.

Ilie, M., “Numerical Computations of Particle-Laden Turbulent Flows,” Proceedings of the Society for Industrial and Applied Mathematics Annual Meeting, Pittsburgh, PA, July 12-16, 2010, pp. 31.

Ilie, M., “Numerical Computations of Particle-Laden Turbulent Reacting Flows: A Large-Eddy Simulation Approach,” Proceedings of the 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Nashville, TN, July 25-28, 2010, pp. AIAA-2010-6742.

Ilie, M., “Numerical Investigations of Vortex-cylinder Mechanism of Interaction using LES and URANS,” Proceedings of the 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, FL, January 4-7, 2011, pp. AIAA-2011-57.

Ilie, M. and S. Llewellyn-Smith, “Numerical Computations of Turbulent Flows: LES/SAS Comparison,” Proceedings of the 63rd Annual Meeting of the Division of Fluid Dynamics, Long Beach, CA, November 21-23, 2010, 2010.

Page 51: 2010 College of Engineering & Computer Science Publications Books

       

51

Jedlinski, J., H.J. Choi, B. Yao and Y.H. Sohn, “Evolution of Phase Constituents and Microstructure in Thermally Grown Oxides on β-NiAl without and with Implanted-Yttrium,” Proceedings of the 34th Annual International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, January 24-29, 2010.

Johnson, P.L., C.Q. Nguyen, S.H. Ho and J.S. Kapat, “Comparison of RANS and LES for Conical Shaped Film Cooling Holes,” Proceedings of the 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Nashville, TN, July 25-28, 2010.

Johnson, P.L., C.Q. Nguyen, S.H. Ho and J.S. Kapat, “Sensitivity Analysis of Domain Considerations for Numerical Simulations of Film Cooling,” Proceedings of the 14th International Heat Transfer Conference, Washington, DC, August 8-13, 2010, pp. IHTC14-23241.

Joslin, A., M. Hernandez, E. Deane, S. Collins and C. Xu, “Experimental Setup for Multi-sensor Fusion and Data Correlation Analysis during CNC Steel Turning,” Proceedings of the ASME International Manufacturing Science and Engineering Conference, Erie, PA, October 4-7, 2010.

Keller, S.G. and A.P. Gordon, “An Experimental Approach for Delayed Stress Corrosion,” Proceedings of the ASME Conference on Pressure Vessels and Piping, Seattle, WA, July 18-22, 2010.

Keller, S.G. and A.P. Gordon, “Incubation Behavior of Hg-LME in Aluminum,” Proceedings of the TMS Annual Meeting and Exhibition, Seattle, WA, February 14-18, 2010. Keller, S. and A.P. Gordon, “Stress Approximation Technique for Helical Compression Springs Subjected to Lateral Loading,” Proceedings of the ASME International Mechanical Engineering Congress & Exposition, Vancouver, BC, November 12-18, 2010.

Keller, S. and A.P. Gordon, “Stress Intensity Incubation Periods for the Al-Hg Couple Subjected to LME,” Proceedings of the ASME International Mechanical Engineering Congress & Exposition, Vancouver, BC, November 12-18, 2010.

Kraft, S. and A.P. Gordon, “Elasto-plastic Properties of a Twill Dutch Woven Wire Mesh,” Proceedings of the ASME Early Career Technical Conference, Atlanta, GA, October 1-2, 2010.

Kreitz, K., J. Johnson, E. Petersen, D. Reid and S. Seal, “Scale-up Effects of Nanoparticle Production on the Burning Rate of Composite Propellant,” Proceedings of the Technical Meeting of the Central States Section of the Combustion Institute, Champaign, IL, March 21-23, 2010.

Kulkarni, N., P. Todd, Y.H. Sohn, K.R. Coffey, S. Brennan and J. Hunter, “Isotopic Diffusion Database for Mg ICME,” Proceedings of the U.S. Automotive Materials Partnership Integrated Computational Materials Engineering for Magnesium Program Workshop, U.S. Council for Automotive Research, Southfield, MI, April 30-31, 2010.

Kumar R. and D. Vazquez, “Heat Transfer Characteristics of Immersed Heaters in Nanofluid Pool Boiling,” Proceedings of the 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Antalya, Turkey, July 19-21, 2010, pp. 1397.

Lawrence, J., F. Liang, H.B. Lu, Y. Tang, J. Gou, Y.J. Liu, J.S. Leng and S.Y. Du, “Shape Memory Polymer Nanocomposites based on Carbon Nanopaper,” Proceedings of the 54th Society for

Page 52: 2010 College of Engineering & Computer Science Publications Books

       

52

Advancement of Material and Process Engineering Symposium and Exhibition, Seattle, WA, May 17-20, 2010.

Li, J., J. Liu and C. Xu, “Machinability Study of SiC Nano-Particles Reinforced Magnesium Nanocomposites during Micro-Milling Processes,” Proceedings of the ASME International Manufacturing Science and Engineering Conference, Erie, PA, October 12-15, 2010, pp. 34294.

Liang, F., Y. Tang, C. Li, L. An and J. Gou, “High Performance Polymeric and Ceramic Nanocomposites for Aircraft Engine Fan Case,” Proceedings of the 54th Society for Advancement of Material and Process Engineering Symposium and Exhibition, Seattle, WA, May 17-20, 2010.

Liang, F., Y. Tang, J. Gou, H. Gu and G. Song, “Vibrational Damping Enhancement of Polymer Composites with Carbon Nanopaper and Different Fiber Reinforcement,” Proceedings of the Earth and Space Conference and the 12th International Conference on Engineering, Science, Construction and Operation in Challenging Environments, Honolulu, HI, March 14-17, 2010.

Liang, F., Y. Tang, J. Gou and J. Kapat, “Development of Multifunctional Nanocomposite Coatings for Wind Turbine Blades,” Proceedings of the Materials Challenges in Alternative & Renewable Energy, Cocoa Beach, FL, February 21-25, 2010, pp. 325-336.

Lin, K.C., J. Gou, C. Ham, S. Helkin and Y.H. Joo, “Flywheel Energy Storage System with Functionally Gradient Nanocomposite Rotor,” Proceedings of the 5TH IEEE Conference on Industrial Electronics and Applications, Taichung, Taiwan, June 15 -17, 2010, pp. 611-613.

Liu, J., J. Li, B. Grummel, C. Xu and J. Shen, “A Contactless Polymer Derived Ceramic Temperature Sensing System for Turbine Applications,” Proceedings of the Florida Center for Advanced Aero-Propulsion Annual Technical Symposium, Tallahassee, FL, August 9-10, 2010.

Liu, J., C. Xu and L. An, “Micro-machinable Polymer-derived Ceramics Sensors for High-temperature Applications,” Proceedings of the SPIE Smart Structure/NDE Conference, March 7-11, San Diego, CA. 2010.

Liu. M. and Q. Chen, “Scale Dependent Mechanical Properties of PDMS Membrane,” Proceedings of the 1st International Workshop on NanoMedicine, Beijing, China, October 23-25, 2010.

Lu, H.B., J. Gou, J.S. Leng and S.Y. Du, “Shape Memory Polymer Nanocomposites based on Carbon Nanopaper,” Proceedings of the Earth and Space Conference and the 12th International Conference on Engineering, Science, Construction and Operation in Challenging Environments, Honolulu, HI, March 14-17, 2010.

McKee, J., J.F. Zhuge, Y. Tang, J. Gou, R.H. Chen, C. Ibeh and Y. Hu, “Morphology, Thermal Stability, and Flammability of Carbon Nanofiber - Clay Based Nanocomposites,” Proceedings of the 54th Society for Advancement of Material and Process Engineering Symposium and Exhibition, Seattle, WA, May 17-20, 2010.

Mixa, M., A.P. Gordon and A. Petit, “Considerations of Critical Analyses for Meso-scale High Temperature Rotating Devices,” Proceedings of the ASME Turbo Exposition, Glasgow, UK, June 14-18, 2010.

Page 53: 2010 College of Engineering & Computer Science Publications Books

       

53

Morikone, M., M. Ilie and S. Llewellyn-Smith, “Numerical Prediction of Pollutant Dispersion into ABL; a Lagrangian Approach using LES,” Proceedings of the 63rd Annual Meeting of Division of Fluid Dynamics, Long Beach, CA, November 21-23, 2010, Vol. 55, No 16, pp. 197.

Moslehy, F.A. and Y. Hosni, “Solar-Powered Air Conditioning: An Elegant Idea for Florida,” Proceedings of the International Conference on Industry, Engineering, and Management Systems, Cocoa Beach, FL, March 8-10, 2010.

Natsui, G., M. Ricklick, C. Nguyen and J.S. Kapat, “Local Temperature Measurements of Porous Media using Temperature Sensitive Paint for Transpiration Cooling Studies,” Proceedings of the 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Nashville, TN, July 25-18, 2010.

Nicholson, D., O. Benafan, S. Padula, R.D. Noebe and R. Vaidyanathan, “Testing of NiTiPdPt High Temperature Shape Memory Alloy Helical Actuators,” Proceedings of the International Conference on Shape Memory and Superelastic Technologies, Pacific Grove, CA, May 16-20, 2010, pp. 232.

Nicholson, D.E., S.A. Padula II, R.D. Noebe and R. Vaidyanathan, “Characterization of NiTiPdPt High Temperature Shape Memory Alloy Helical Actuators,” Proceedings of the Florida Center for Advanced Aero-Propulsion Annual Technical Symposium, Tallahassee, FL, August 9-10, 2010.

Nguyen, C.Q., B.C. Bernier, N.T.V. Tran, S.H. Ho and J.S. Kapat, “Cooling Uniformity Coefficient versus Effectiveness on a Round Hole Film Cooling Embedded in Trench,” Proceedings of the ASME Turbo Exposition: Power for Land, Sea and Air, Glasgow, UK, June 14-18, 2010, pp. GT2010-22120.

Nguyen, C., J. Kullberg, S. Ho and J. Kapat, “Applying Response Surface Methodology on a Film Cooling Effectiveness for a Realistic Anular Cascade, Phase 1: Test Rig Construction and Preliminary Data,” Proceedings of the 48th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, FL, January 4-7, 2010, pp. AIAA-2010-405.

Nguyen, C.Q., P.L. Johnson, B.C. Bernier, S.H. Ho and J.S. Kapat, “Comparison of Film Cooling Effectiveness and Cooling Uniformity Coefficient of Conical and Cylindrical Film Cooling Hole with Coolant-Exit Temperature Correction,” Proceedings of the ASME Turbo Exposition: Power for Land, Sea and Air, Glasgow, UK, June 14-18, 2010, pp. GT2010-23732.

Orlovskaya, N., M. Lugovy, V. Slyunyayev, V. Subbotin, F. Liang, J. Gou, J. Kuebler and T. Graule, “Boron Carbide/Boron Carbide - Carbon Nanofibers Laminates with Weak Interfaces,” Proceedings of the NATO Advanced Research Workshop on Boron Rich Solids: Sensors for Biological and Chemical Detections, Ultra High Temperature Ceramics, Thermoelectrics, Armor, Orlando, FL, December 14-18, 2010, pp. 1-11.

Osorio, A., R. Osorio, R. Tran, A. Ceballos, A.J. Kassab, E. Divo, R. Argueta- Morales and W. DeCampli, “CFD Case Study to Optimize Surgical Adjustment of Ventricular Assist Device Implantation to Minimize Stroke Risk. Part I: Steady-State CFD Modeling,” Proceedings of the International Conference on Computational & Experimental Engineering and Sciences, Las Vegas, NV, March 28 - April 1, 2010, pp. 123-124.

Peng, J., Y. Fan, F. Jiang, X. Zhang and K.C. Lin, “Communication Scheme in Trusted Sensor Network,” Proceedings of the 2nd International Conference on Networks Security; Wireless Communications and Trusted Computing, Wuhan, China, April 24-25, 2010, pp. 10-13.

Page 54: 2010 College of Engineering & Computer Science Publications Books

       

54

Qiu, S., O. Benafan, S. Padula, R.D. Noebe and R. Vaidyanathan, “Deformation Studies in NiTiPd and NiTiPt High Temperature Shape Memory Alloys,” Proceedings of the International Conference on Shape Memory and Superelastic Technologies, Pacific Grove, CA, May 16-20, 2010, pp. 60.

Rangaswamy, S., S. Raghavan, M.Z. Ahmad, T. Clarke, C. Ellis, S. Tafur and R. Palaniappan, “High Performance Computing Benchmark Tool for Parallel Processing of Large Models,” Proceedings of the AIAA Infotech@Aerospace, Atlanta, GA, April 20-22, 2010.

Remeikas, C., S. Chowdhury, P. Saengsuri, Y. Xu, X. Geng, C. Ling and Z. Siddique, “Gaming and Interactive Visualization for Education – Year 1 Progress,” Proceedings of the ASEE Annual Conference and Exposition, Louisville, KY, June 20-23, 2010.

Ricklick, M., R. Claretti and J.S. Kapat, “Channel Height and Jet Spacing Effect on Heat Transfer and Uniformity Coefficient on an Inline Row Impingement Channel,” Proceedings of the ASME Turbo Exposition: Power for Land, Sea and Air, Glasgow, UK, June 14-18, 2010, pp. GT2010-23757.

Ricklick, M., R. Claretti and J.S. Kapat, “Comparison of Heat Transfer Coefficient and Thermal Performance of a Narrow Impingement Channel,” Proceedings of the 48th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, FL, January 4-7, 2010, pp. AIAA-2010-1117.

Saha, A., E. Tijerino, R. Kumar and S. Basu, “Heat Transfer and Chemical Transformation of Levitated Droplets Containing Dissolved and Undissolved Impurities,” Proceedings of the 8th Asia-Pacific Conference on Combustion, Hyderabad, India, December 10-13, 2010, pp. SD1004.

Saha, A., E. Tijerino, R. Kumar and S. Basu, “IR-Thermography and High Speed Imaging of Cerium Nitrate Precursor Droplets Heated by Monochromatic Irradiation,” Proceedings of the ASME 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, Montreal, Canada, August 1-5, 2010, pp. 31168.

Saha, A., E. Tijerino, R. Kumar and S. Basu, “IR-Thermography, Laser Induced Fluorescence and High Speed Imaging of Cerium Nitrate Precursor Droplets Heated by Monochromatic Irradiation,” Proceedings of the 15th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, July 3-5, 2010, pp. 1732.

Saha, A., E. Tijerino, R. Kumar and S.Basu, “Radiative Heating of Acoustically Levitated Nanosilica Droplets: Internal Flow Pattern Leading to Ring or Bowl Shaped Structure,” Proceedings of the 63rd Annual Meeting of the APS Division of Fluid Dynamics, Long Beach, CA, November 21-23, 2010.

Siddique, Z., C. Ling, P. Saengsuri, S. Chowdhury, Y. Xu and G. Xiaojun, “Gaming and Interactive Visualization Education Module to Help Understand Geometric Tolerancing,” Proceedings of the ASME International Design Engineering Technical Conferences & Computers and Information Engineering Conference, Montreal, Canada, August 15-18, 2010, pp. 639-645.

Slabaugh, C.D., L.V. Tran and J.S. Kapat, “Heat Transfer and Friction Augmentation in High Aspect Ratio, Ribbed Channels with Dissimilar Inlet Conditions,” Proceedings of the 14th International Heat Transfer Conference, Washington, DC, August 8-13, 2010, pp. 817-838.

Slabaugh, C.D., M. Valentino and J.S. Kapat, “Side Wall Heat Transfer and Friction Augmentation in a Narrow Rectangular Duct with Features Applied to the One Wall,” Proceedings of the 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Nashville, TN, July 25-18, 2010.

Page 55: 2010 College of Engineering & Computer Science Publications Books

       

55

Slabaugh, C.D., L.V. Tran and J.S. Kapat, ‘Side Wall Heat Transfer Augmentation in a Narrow Rectangular Channel with Dimples Applied to the Bottom Wall,” Proceedings of the 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Nashville, TN, July 25-18, 2010.

Sohn, Y.H., B. Yao, T. Patterson, C. Hofmeister and H. Heinrich, “Microstructural Analysis for Manufacturing Optimization of Trimodal Al Matrix Composites,” Proceedings of the Aluminum for Defense Applications Workshop, Baltimore, MD, May 3-4, 2010.

Stewart, C.M. and A.P. Gordon, “A Creep Rupture Time Model for Anisotropic Creep-damage of Transversely Isotropic Materials,” Proceedings of the Minerals, Metals & Materials Annual Meeting and Exhibition, Seattle, WA, February 14-18, 2010.

Stewart, C.M. and A.P. Gordon, “Analytical Method to Determine the Tertiary Creep Damage Constants of the Kachanov-Rabotnov Constitutive Model,” Proceedings of the ASME International Mechanical Engineering Congress & Exposition, Vancouver, BC, November 12-18, 2010.

Stewart, C.M. and A.P. Gordon, “An Anisotropic Tertiary Creep Damage Model for Directionally-solidified Ni-base Superalloys,” Proceedings of the ASME Conference on Pressure Vessels and Piping, Seattle, WA, July 18-22, 2010.

Stewart, C.M. and A.P. Gordon, “Crack Initiation Modeling of Turbine Blade Cooling Holes under Creep Conditions,” Proceedings of the Florida Center for Advanced Aero-propulsion Annual Technical Symposium, Tallahassee, FL, August 9-10, 2010.

Tang, Y. and J. Gou, “Morphology, Electrical Conductivity of Novel Graphite Nanoplatelets – Carbon Nanotube Hybrid Nanopaper,” Proceedings of the Earth and Space Conference and the 12th International Conference on Engineering, Science, Construction and Operation in Challenging Environments, Honolulu, HI, March 14-17, 2010.

Tang, Y., J.F. Zhuge, J. Lawrence, J. McKee, L. An and J. Gou, “High Temperature Polymeric Nanocomposites for Aero-Propulsion Applications,” Proceedings of the 2nd Florida Center for Advanced Aero-propulsion Annual Symposium & Exhibition, Tallahassee, FL, August 9-10, 2010.

Tang, Y., J.F. Zhuge, J. Lawrence, J. McKee, J. Gou, R.H. Chen and C. Ibeh, “Flame Retardancy of Hybrid Carbon Nanofiber Paper based Polymer Nanocomposites,” Proceedings of the 21st Annual Recent Advances in Flame Retardancy of Polymeric Materials, Stamford, CT, May 24-26, 2010.

Tijerino, E., A. Saha, R. Kumar and S. Basu, “Acoustically Levitated Nanofluid Droplet Vaporization,” Proceedings of the ASME 3rd Joint US-European Fluids Engineering Summer Meeting and the 8th International Conference on Nanochannels, Microchannels, and Minichannels, Montreal, Canada, August 1-5, 2010, pp. 31172.

Tran, L.V., C.D. Slabaugh and J.S. Kapat, “Thermal Performance in High Aspect Ratio Internal Cooling Channels Manufactured with Various Techniques,” Proceedings of the 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Nashville, TN, July 25-18, 2010.

Tran, N., C. Nguyen, S. Ho and J. Kapat, “Prediction of Adiabatic Effectiveness of Various Cratered Film Hole Configurations, Part 1: Sensitivity Analysis for the Rectangle Shaped Mask,” Proceedings of the 48th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, FL, January 4-7, 2010, pp. AIAA-2010-404.

Page 56: 2010 College of Engineering & Computer Science Publications Books

       

56

Uribe, C., B. Yao, M.D. Skibo, A. Drake, D. Schuster, A. Loukus, K. Cho and Y.H. Sohn, “Effect of Successive Hot Rolling on the Microstructure and Dynamic Compressive Strength of Al A359/SiCp Composites Prepared by Stir Casting,” Proceedings of the Symposium on High Strain Rate Behaviors of Composites and Heterogeneous Materials: Experiments, Modeling, and Simulation, Materials Science & Technology, Houston, TX, October 17-21, 2010.

Velez C. and M. Ilie, “The Dynamics of Vortex Shedding of Flow Past a Vertical Flat Plate: LES studies,” Proceedings of the 63rd Annual Meeting of Division of Fluid Dynamics, Long Beach, CA, November 21-23, 2010, Vol. 55, No 16, pp. 228.

Weiland N., R.H. Chen and P. Strakey, “Effects of Coaxial Air on Nitrogen-diluted Jet Hydrogen Diffusion Flame Length and NOx Emission,” Proceedings of the Technical Meeting of the Central States Section of the Combustion Institute, Champaign, IL, March 21-23, 2010, pp. 2983-2989.

Woodburn, D.A., T. Wu, L. Chow, Q. Leland, W. Brokaw, J. Bindl, N. Rolinski, R. Zhou, Y.R. Lin and B. Jordan, “Dynamic Heat Generation Modeling of High Performance Electromechanical Actuator,” Proceedings of the 48th AIAA Aerospace Sciences Meeting, Orlando, FL, January 4-7, 2010, pp. 2010-0290.

Woodburn, D.A., T. Wu, S. Lin, J. Bindl, Y. Hu, W. Brokaw, L. Chow, L. Zhou, Y.R. Lin, Q. Leland, B. Tran, B. Jordan, E. Gregory, S. Iden and N. Rolinski, “Integrated Nonlinear Dynamic Modeling and Field Oriented Control of Permanent Magnet Motor for High Performance EMA,” Proceedings of the SAE 2010 Power Systems Conference, Ft. Worth, TX, November 2-4, 2010, pp. 2010-01-1742.

Wright, A., C. Gonzalez, A. Jones and S. Raghavan “Pizospectroscopic Measurements on Alumina Epoxy Composites,” Proceedings of the 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Orlando, FL, April 12-15, 2010.

Wright A.L. and S. Raghavan, “Effects of Stress on Alumina Nanocomposites using Piezospectroscopy,” Proceedings of the Society for the Advancement of Material and Process Engineering Conference, Seattle, WA, May 17-20, 2010.

Xie, G., J. Peng, X. Zhang and K.C. Lin, “A Dynamic Task Planning based on Task Subcontracting and Dynamic Re-decomposition,” Proceedings of the 29th Chinese Control Conference, July 29-31, 2010, Beijing, China, pp. 4518-4523.

Xin, M., Y. Xu and R. Hopkins, “Trajectory Control of Miniature Helicopters using a Unified Nonlinear Optimal Control Technique,” Proceedings of the 2010 AIAA Guidance, Navigation, and Control Conference, Toronto, Canada, August 2-5, 2010.

Xu, Y., “Analytical Solutions to Formation Flying System Trajectory Guidance via the Virtual Motion Camouflage Approach,” Proceedings of the 2010 AIAA Guidance, Navigation, and Control Conference, Toronto, Canada, August 2-5, 2010.

Xu, Y. and B. Gareth, “Optimal Coherent Phantom Track Design using Virtual Motion Camouflage,” Proceedings of the 2010 American Control Conference, Baltimore, MD, June 30-July 2, 2010.

Xu, Y. and G. Basset, “Real-Time Optimal Coherent Phantom Track Generation via the Virtual Motion Camouflage Approach,” Proceedings of the 2010 AIAA Guidance, Navigation, and Control Conference, Toronto, Canada, August 2-5, 2010.

Page 57: 2010 College of Engineering & Computer Science Publications Books

       

57

Xu, Y. and B. Gareth, “Virtual Motion Camouflage based Phantom Track Generation through Cooperative Electronic Combat Air Vehicle,” 2010 American Control Conference, Baltimore, MD, June 30-July 2, 2010.

Xu, Y. and G. Basset, “Analytical Neighboring Optimal Guidance to Finite Horizon Linear Quadratic Tracking Problems,” Proceedings of the 49th IEEE Conference on Decision and Control, Altanta, GA, December 15-17, 2010.

Yakshi-Tafti, E., H. Cho and R. Kumar, “Effect of Drop Shape on Thermally-induced Drop Motion at the Free Interface of Immiscible Liquid Layers,” Proceedings of the 63rd Annual Meeting of the APS Division of Fluid Dynamics, Long Beach, CA, November 21-23, 2010.

Yang, M., D. Belsito, B. Yao, Y.H. Sohn and R.D. Sisson, Jr., “Simulation of the Ferritic Nitriding Process,” Proceedings of the Materials Science & Technology Conference: Phase Stability and Diffusion Kinetics V, Houston, TX, October 17-21, 2010, pp. 957-968.

Yao, B., C. Hofmeister, Y.H. Sohn and K. Cho, “Analytical Characterization and First-Principle Calculation of Dispersoids in Trimodal Aluminum Metal Matrix Composites,” Proceedings of the Advances in Powder Metallurgy & Particulate Materials Conference, Hollywood, FL, June 27-30, 2010, pp. II-9-3.

Yoon, J., Y. Xu and P. Vedula, “A Direct Quadrature based Nonlinear Filtering with Extended Kalman Filter Update for Orbital Determination,” Proceedings of the American Control Conference, Baltimore, MD, June 30-July 2, 2010.

Zhou, L., Y.R. Lin, L. Chow, D.A. Woodburn, T. Wu, J. Bindl, Y. Hu, W. Brokaw, Q. Leland, B. Tran, B. Jordan, E. Gregory, S. Iden and N. Rolinski, “Lumped Node Thermal Modeling of EMA with FEA Validation,” Proceedings of the SAE 2010 Power Systems Conference, Ft. Worth, TX, November 2-4, 2010, pp. 2010-01-1749.

Zhuge, J.F., Y. Tang, J. Gou, R. Chen, C. Ibeh and Y. Hu, "Study of Fire Retardant Performance of Composites Coated with Hybrid Carbon Nanofiber Paper,” Proceedings of the Earth and Space Conference and the 12th International Conference on Engineering, Science, Construction and Operation in Challenging Environments, Honolulu, HI, March 14-17, 2010.