2010 driver designs catalog
DESCRIPTION
Driver Design Accessories for Trucks and AutosTRANSCRIPT
2010 ACCESSORY CATALOG
IFC | www.driverdesign.com
Ski-Doo
Windshield decalsdoes not obstruct vision • Universal design fits almost any vehicle
Flames
Rocket Bee
Techno Bee
• Fits 2” receivers • Gives your vehicle a custom finished look • Keeps dirt, snow and other debris out of your receiver
hiTch plUG MUd Flaps
• Keep your vehicle cleaner from dirt and mud • Reduce damage from rock chips and other road debris• Fit most trucks and sUVs• Quick and easy installation• One set of two
Ski-Doo
800.323.6563 | 1
ReaR & side WindOW sKins
Flames • Rocket Bee • Techno BeeRear skins (23”X66”) & side skins (6”X15”)
View from the inside looking out
-Trim to fit almost any vehicle-clear view from the inside looking out-non-permanent adhesive for easy removal-added UV protection
Ski-Doo® and the BRP logo are trademarks of Bombardier RecreationalProducts Inc, or its affiliates, used under license by Koronis Parts Inc.
Window Graphics
2 | www.driverdesign.com
Window Graphics Eye-catching rear and side window graphics that help you gain privacy while making a statement with your vehicle. Available in numerous designs including Rear and Side Window Skins.
+ Rear Window Skins are 23"x66"+ Side Window Skins are 3.25"x16"+ Installs in minutes+ Fits MOST windows (SUV’s, trucks, vans, cars, etc...)+ Added UV protection for vehicle interiors+ Helps keep interior temps low+ Added security and privacy+ Car wash safe
902-125-04 902-125-03902-125-02
902-125-07902-125-06 902-125-01
902-125-05
902-125-08
Personalize your vehicle with our line of Window Graphics
Refer to Application Guide for Special Order
Custom Graphics Program
Window Graphics
800.323.6563 | 3
Stake Pocket Protectors+ Keeps stake pockets free of debris+ Made of high-impact black ABS+ Paintable to match vehicle color+ No-drill, snap in installation system
Hitch Pins+ No need for clevis pin+ Padlock access+ Rust resisting+ Black zinc finish+ Dual stainless ball dents
Heavy Duty Molded Truck Bed & Tailgate Mats+ Provides rugged protection from dents, scratches,
and chemical spills+ Non-skid grid cushions cargo and prevents
dangerous load shifts+ Made of virgin natural rubber with special fibers
for added strength and flexibility
Trailer Rock & Salt Guards+ Keeps rocks, salt and mud off your vehicles,
snowmobiles, and ATV’s+ Reduce air turbulence while towing+ High-impact resistant+ Available for single and double trailers+ Double trailer applications available
for both straight and V-front
Speed Straps
4 | www.driverdesign.com
288532” RTD Flat Hooks
116011” 6ft RTD w/double S-Hooks
28502 RTD J-Hooks
137071” Camlock
90110 90111
Speed Strap Small Bag
Beard Seats
800.323.6563 | 5
41020 - Enduro
40500 - BENCH36”/2PASS-J30c
40010 Enduro GT
40250 Super T1
Hood Shields
6 | www.driverdesign.com
A simple concept... an intelligent solution.Leading Edge® Hood Shields are mounted at least 1" away from the hood with patented bracket system and breakaway nylon fastener system that is capable of clearing extremely tight hood tolerances and still keeping it away from the surface of your hood, protecting it from debris as well as from contact with the hood shield. The Leading Edge® Bracket System creates a drain system that prevents the build-up of damaging moisture and debris. The Leading Edge®
Our Features Make Our Hood Shields Superior to the Competition:
LE Series — Low profile hood shield that offers superior protection for your vehicle.
rubber washer isolation prevents damage caused by contact between plastic and steel. The high- impact acrylic used on the LE series is thicker and more rigid than the competitor’s products. Unlike Lexan® Polycarbonate, acrylic won’t flex against the hood and will not “yellow” or become dull when exposed to the elements. Driver Design Hood Shields are available in Clear, Smoke, and pre-painted. Consult your application guide for applications and available colors.
Driver Design
Competition
Met
al
Brac
ket M
ount
No Hoo
d
Conta
ct
High Im
pact
Acrylic
Brea
k-Away
Bolts Cus
tom
Mou
nting
Brac
kets
Can C
lean
Behind
No Bu
mpe
rs
Requ
ired
Will
Not C
ause
Hood
Damag
e
UPS-a
ble
Our Advantages
Leading EdgeLE® Series
Patent No. 4,952,006
Spoiler edge styling in true smoke or clearHigh Impact Acrylic for the LE Series. (Our clear shields can be painted for a custom look).
The High Impact Acrylic used on the LE Series is thickerand more rigid than the competitor’s products. Unlike Lexan®Polycarbonate, Acrylic won’t flex against the hood and will not “yellow” or become dull when exposed to the elements.
A Patented Bracket System maintains the space between the hood shield and the hood.
Rubber Washer Isolation prevents damage caused by plastic steel contact.
Patented Breakaway Nylon Fastener System prevents damageto your hood shield from overtightening of screws.
The Bracket System accommodates extremely tight tolerances andallows correct fitting to vehicles with rubber extrusions under the hood.
Our Features
Driver Design Hood Shields are easily paintable. Most new applications are available with easy no-drill installation.
Pre-painted LE Series hood shield is also available in numerous factory colors.
+ Most new applications available with easy no-drill installation
+ Custom designed “factory clean look”
+ Easily paintable
Air Flares
800.323.6563 | 7
Air flares provide a constant circulation of fresh air to your vehicles interior in any weather while keeping rain out and reducing window fogging. Driver Design Air Flares are made of durable high gloss acrylic. They are designed for a “factory clean look” and engineered to enhance your driving pleasure.
Our Air Flares are Designed for Style and Increased Driving Comfort
Pre-painted
Air Flares provide a constant circulation of fresh air to your vehicle’s interior in snow,
rain, or hot and humid weather.
Smoke
+ Reduces wind noise with side window open
+ Available in Smoke and Pre-painted
+ Easy no-drill installation with 3M tape
Plastic Hood Scoops
8 | www.driverdesign.com
901-1108 Reversible Cowl InductionScoop Dimensions: 28" L, 24" W, 3" HPackaged: Scoop, choice of 2 decal kits & 3M tapeAvailable in both black plastic & OEM pre-painted
Available in Carbon Fiber look (shown here in close-up)
901-1108 CFB
+ Fits sport compacts, street rods, cars, trucks & SUV’s
+ Certain applications have easy no-drill installation with 3M tape
+ Custom designed “factory clean look”+ Easily paintable+ Certain applications contain paintable
custom grille insert+ Available for most applications+ Newly added option – Specific scoops
available pre-painted with OEM colors
Plastic and Fiberglass Hood ScoopsEye-catching hood scoops combine lightweight with superior toughness. Made of shatter resistant thermo-molded plastic with smooth finish; can be painted to match your vehicle. Secures with tape, unless application guide specifies other. Some drilling may be required.
901-1104 shown here
901-1106 shown here
Plastic Hood Scoops
800.323.6563 | 9
901-1104 2pc. Performance (Small)Scoop Dimensions: 19" L, 10.5" W, 1.5" HPackaged: 1 set of two, 2 grille inserts & 3M tapeAvailable in both black plastic & OEM pre-painted
Available in Carbon Fiber look (shown here in close-up)
901-1104 CFB
901-1109 2pc. Performance (Medium)Scoop Dimensions: 27" L, 12.5" W, 1.5" HPackaged: 1 set of two, 2 grille inserts & 3M tapeAvailable in both black plastic & OEM pre-painted
Available in Carbon Fiber look (shown here in close-up)
901-1109 CFB
901-1111 2pc. Performance (Large)Scoop Dimensions: 34" L, 13" W, 1.5" HPackaged: 1 set of two, 2 grille inserts & 3M tapeAvailable in both black plastic & OEM pre-painted
Available in Carbon Fiber look (shown here in close-up)
901-1111 CFB
901-1112 SRT PerformanceScoop Dimensions: 33.5" L, 27" W, 2" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted
Plastic Hood Scoops
10 | www.driverdesign.com
901-1103 WRXScoop Dimensions: 10" L, 25" W, 1.75" HPackaged: Scoop, grill insert & 3M tapeAvailable in both black plastic & OEM pre-painted
Available in Carbon Fiber look (shown here in close-up)
901-1103 CFB
901-0090 Euro (Super Mini)Scoop Dimensions: 10" L, 8" W, 1.5" HPackaged: Scoop, grille insert & 3M tapeAvailable in both black plastic & OEM pre-painted
901-1106 PerformanceScoop Dimensions: 17" L, 14" W, 2.5" HPackaged: Scoop, 2 grille inserts & 3M tapeAvailable in both black plastic & OEM pre-painted
Available in Carbon Fiber look (shown here in close-up)
901-1106 CFB
901-0100 shown here
901-1112 shown here
Plastic Hood Scoops
901-0110 Euro (Medium)Scoop Dimensions: 13.5" L, 9.5" W, 1.5" HPackaged: Scoop, grille insert & 3M tapeAvailable in both black plastic & OEM pre-painted
Available in Carbon Fiber look (shown here in close-up)
901-0010 CFB
901-0120 Euro (Large)Scoop Dimensions: 16.5" L, 12.25" W, 2" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted
901-1102 Roof & Hood scoopScoop Dimensions: 15.5" L, 14.5" W, 2" HPackaged: Scoop, grille insert & 3M tapeAvailable in both black plastic & OEM pre-painted
901-1106
800.323.6563 | 11901-1104 shown here
901-2300 Street Rod/ Pro Stock (Large)
Scoop Dimensions: 41.75" L, 22.25" W, 7" HPackaged: ScoopAvailable in black plastic
Scoop is Rivet/Bolt on (hardware NOT included)
Plastic Hood Scoops
901-0800 Mopar Super Six-PackScoop Dimensions: 28" L, 31" W, 4.5" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted
Scoop is open in front
901-3000 Street Rod/ Pro Stock (Small)
Scoop Dimensions: 35" L, 20" W, 5" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted
901-2100 Street Rod/ Pro Stock (Medium)
Scoop Dimensions: 39" L, 24.5" W, 7.5" HPackaged: ScoopAvailable in black plastic
Scoop is Rivet/Bolt on (hardware NOT included)
12 | www.driverdesign.com
901-1105 shown here
901-1105 shown here
Plastic Hood Scoops
901-1510 Early Z-28 Camaro (Small)
Scoop Dimensions: 27.75" L, 19" W, 2" HPackaged: Scoop and 3M tapeAvailable in both black plastic & OEM pre-painted
Scoop is open in back
901-1520 Early Z-28 Camaro (Medium)Scoop Dimensions: 33" L, 21" W, 2" HPackaged: Scoop and 3M tapeAvailable in both black plastic & OEM pre-painted
Scoop is open in back
901-1500 Early Z-28 Camaro (Large)
Scoop Dimensions: 37" L, 22.5" W, 2" HPackaged: Scoop and 3M tapeAvailable in both black plastic & OEM pre-painted
Scoop is open in back
901-1700 Early Cowl Induction Z-28Scoop Dimensions: 38" L, 21.5" W, 5.5" HPackaged: ScoopAvailable in black plastic
Scoop is Rivet/Bolt on (hardware NOT included)Scoop is open in back
800.323.6563 | 13
901-0500 L-88 Corvette (Mini)Scoop Dimensions: 32" L, 18.25" W, 2" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted
Scoop is open in back
901-1300 427 Corvette- Stingray Type (Mini)
Scoop Dimensions: 23.5" L, 15" W, 1.5" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted
Scoop is open in back
901-0200 427 Corvette- Stingray Type
Scoop Dimensions: 36" L, 23" W, 3.75" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted
Scoop is open in back
901-1108 shown here
901-1109 shown here
Plastic Hood Scoops
14 | www.driverdesign.com
901-1105 shown here
901-1105 shown here
Plastic Hood Scoops
901-0300 L-88 CorvetteScoop Dimensions: 50" L, 31" W, 3.5" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted
Scoop is open in back
901-0700 SVO MustangScoop Dimensions: 24.5" L, 24.5" W, 2" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted
901-1200 Mopar Pro Stock (Mini)Scoop Dimensions: 28.5" L, 19.5" W, 3.5" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted
800.323.6563 | 15
Plastic Hood Scoops
16 | www.driverdesign.com
901-1107 Reverse EuropeanScoop Dimensions: 29.5" L, 16.5" W, 1" HPackaged: 1 set & 3M tapeAvailable in both black plastic & OEM pre-painted
901-1105 Louvered PerformanceScoop Dimensions: 17" L, 14" W, 2.5" HPackaged: Scoop, 2 grill inserts & 3M tapeAvailable in both black plastic & OEM pre-painted
901-0100 Cobra Jet (Mini)Scoop Dimensions: 21.5" L, 13" W, 2" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted
901-1107 shown here901-1510
Plastic Hood Scoops & Louvers
901-2400 Pro Stock “Snorkel” (Small)
Scoop Dimensions: 29" L, 16.5" W, 5" HPackaged: ScoopAvailable in black plastic
Scoop is Rivet/Bolt on (hardware NOT included)
901-2500 Pro Stock “Snorkel” w/5° Angle (Large)
Scoop Dimensions: 26.5" L, 16.5" W, 6" HPackaged: ScoopAvailable in black plastic
Scoop is Rivet/Bolt on (hardware NOT included)
Hood/Panel Louvers+ Easy no-drill installation + 6 Louvers per panel (5”x9”) + 9 Louvers per panel (5”x13”) + 12 Louvers per panel (5”x17”) + All sizes available in both black ABS
or carbon fiber look + Easily paintable
Available in Carbon Fiber look (shown here in close-up)
800.323.6563 | 17
901-5004 Early FordScoop Dimensions: 33" L, 26.5" W, 5" HPackaged: Scoop
Scoop is made of Fiberglass Scoop is open in front
Fiberglass Hood Scoops
901-5001 TeardropScoop Dimensions: 37.75" L, 26" W, 4" HPackaged: Scoop
Scoop is made of Fiberglass
901-5002 Mopar Six-PackScoop Dimensions: 28" L, 31.5" W, 3.5" HPackaged: Scoop
Scoop is made of Fiberglass
901-5003 Shelby MustangScoop Dimensions: 38.5" L, 30" W, 1.5" HPackaged: Scoop
Scoop is made of Fiberglass
18 | www.driverdesign.com
Fiberglass Hood Scoops
901-5005 Early Z-28 CamaroScoop Dimensions: 48.5" L, 25.5" W, 3" HPackaged: Scoop
Scoop is made of Fiberglass Scoop is open in back
901-5006 Cobra Jet (Mini)Scoop Dimensions: 21.5" L, 13.25" W, 1.75" HPackaged: Scoop
Scoop is made of Fiberglass Scoop is open in front
901-5007 Cobra JetScoop Dimensions: 29.5" L, 18.5" W, 2" HPackaged: Scoop
Scoop is made of Fiberglass
901-5008 L-88 Corvette (Mini)Scoop Dimensions: 34" L, 17.75" W, 2" HPackaged: Scoop
Scoop is made of Fiberglass Scoop is open in back
800.323.6563 | 19
901-5012 Early Trans-Am ShakerScoop Dimensions: 20" L, 17" W, 4" HPackaged: Scoop
Scoop is made of Fiberglass
Fiberglass Hood Scoops
901-5009 L-88 CorvetteScoop Dimensions: 48.5" L, 27.5" W, 4" HPackaged: Scoop
Scoop is made of Fiberglass Scoop is open in back
901-5010 1980 Z-28 CamaroScoop Dimensions: 48.5" L, 15.25" W, 1.5" HPackaged: Scoop
Scoop is made of Fiberglass
901-5011 1981 Z-28 CamaroScoop Dimensions: 49.25" L, 19" W, 2.5" HPackaged: Scoop
Scoop is made of Fiberglass
20 | www.driverdesign.com
Fiberglass Hood Scoops
901-5013 2.5” Z-28 Style CowlScoop Dimensions: 43" L, 28" W, 2.5" HPackaged: Scoop
Scoop is made of Fiberglass Scoop is open in back
901-5014 4” Z-28 Style CowlScoop Dimensions: 43" L, 28" W, 4" HPackaged: Scoop
Scoop is made of Fiberglass Scoop is open in back
901-5015 4” Z-28 Style CowlScoop Dimensions: 53.5" L, 28" W, 4" HPackaged: Scoop
Scoop is made of Fiberglass Scoop is open in back
901-5016 6” Z-28 Style CowlScoop Dimensions: 49" L, 28" W, 6" HPackaged: Scoop
Scoop is made of Fiberglass Scoop is open in back
800.323.6563 | 21