2011 special offer

1

Order No.Range Depth Rod Output List Our Price4102201 0-6”/0-150mm Round No $139.00 $94.504102204 0-6”/0-150mm Rectangular No $139.00 $94.504102400 0-6”/0-150mm Round Yes $258.00 $129.004102403 0-6”/0-150mm Rectangular Yes $258.00 $129.004102402 0-8”/0-200mm Round Yes $232.00 $174.004102360 0-12”/0-300mm Yes $419.00 $335.00While supplies last

Save upto 32%

Mitutoyo Digimatic Calipers

Save upto 33%

Metrology & ToolingDimetrix

2600 Beverly Drive, #114, Aurora, IL 60502 Phone: 800-313-8168 Fax: 800-314-6947 [email protected] www.dimetrix.com

MarCal Digital Calipers 16EX & 16EXC

Reference Calipers 16 ER

• The Reference Caliper allows direct measurements from power on.

• Large .334" high LCD digits allow measurement results

• Battery last 3 years

• .0005"/0.01mm resolution

New Save25%

Order Measuring Depth Friction List Our No. Range Remarks Rod Wheel Price Price

4103000 6”/150mm No Output Round No $129.00 $96.004103001 6”/150mm No Output Flat No $129.00 $96.00

4103002 6”150mm With Output Round No $155.00 $116.00

4103003 6”150mm With Output Flat No $155.00 $116.00

4103004 8”/200mm With Output Flat No $210.00 $157.00

4103005 12”300mmWith Output None No $330.00 $247.00

Order No. Range Output List Our Price500-196-20 0-6”/0-150mm No Output $145.00 $96.00500-197-20 0-8”/0-200mm No Output $199.00 $159.00500-171-20 0-6”/0-150mm With Output $168.00 $125.00500-172-20 0-8”/0-200mm With Output $220.00 $165.00500-173 0-12"/0-300mm With Output $469.00 $350.00

• Large LCD display• Imperial/Metric conversion• Origin Setting• Accuracy: 6’’ & 8’’± .001’’ , 12’’ +/-.0015’’ • .0005"/0.01mm resolution

• Versions with a round or a flat depth rod are available • Lapped guide ways allow smooth and even movement• Accuracy: 6’’ & 8’’± .001’’ , 12’’ +/-.0015’’ • Resolution .01mm/.0005’’

2011 Special OfferWith savings of up to 50%

You’ll also receive a FREE Mitutoyo metrology handbook with any order over $1000.00

The Science of measurement, 260 page full-color handbook. Over 300 photographs and technical drawings. Serves as a primer on ISO, QS and TE requirements for calibration of test and measuring equipment.

Free40 page Engineers Reference Book

with every Mitutoyo Caliper

2

Phone: 800-313-8168 [email protected] Fax: 800-314-6947

• This IP67 Reference Caliper allows direct measurements from power on.

• Battery last 3 years • .0005"/0.01mm resolution.

Order Measuring Depth Friction List Our No. Range Remarks Rod Wheel Price Price

4103061 6”/150mm No Output Round Yes $179.00 $133.004103063 6”/150mm No Output Flat Yes $179.00 $133.00

4103065 6”150mm With Output Round Yes $228.00 $171.00

4103067 6”150mm With Output Flat Yes $228.00 $171.00

4103072* 6”150mm With Output Round No $336.00 $252.00

4103069 8”/200mm With Output Rectangular Yes $276.00 $207.00

4103071 12”300mm With Output None Yes $420.00 $315.00

IP67 Reference Calipers 16EWR

New

Save25%

Order No. Range Output List Our Price500-752-10 0-6”/0-150mm No $186.00 $139.00500-753-10 0-8”/0-200mm No $234.00 $175.00500-754-10 0-12”/0-300mm No $340.00 $255.00500-762-10 0-6”/0-150mm Yes $221.00 $165.00500-763-10 0-8”/0-200mm Yes $278.00 $208.00500-764-10 0-12”/0-300mm Yes $419.00 $314.00

Save25%

• Water, Oil, Dust, Coolant and Submersion resistance • Imperial/Metric conversion• Accuracy: 6’’ & 8’’± .001’’ , 12’’ +/-.0015’’ • .0005"/0.01mm resolution

Mitutoyo Coolant Proof Calipers IP67IP67

Tesa Calipers waterproof class IP67

Order Measuring Friction List Our No. Range Wheel Price Price 00530300 0-6”/0-150mm No $187.00 $163.00 00530302 0-8”/0-200mm Yes $288.00 $243.00 00530303 0-12”/0-300mm Yes $426.00 $362.00

• Large .250" high LCD digits

• .0005"/0.01mm resolution

• No output

Save12.5%• Resolution .01mm/.0005’’

• No output

• Supplied with Thumb wheel

Save up to 30%

MarCal Calipers 16 EW waterproof class IP67

Order Measuring Depth List Our No. Range Rod Price Price4102901 0-6”/0-150mm Round $192.00 $130.004102912 0-6”/0-150mm Flat $186.00 $130.004102903 0-8”/0-200mm Round $260.00 $180.004102907 0-12”/0-300mm None $420.00 $294.00While supplies last

Free40 page Engineers

Reference Bookwith every

Mitutoyo Caliper

* Ceramic measuring faces

3


Insize Plastic Caliper Insize Solar Caliper

Order No. Range Resolution List Our Price1134-150 0-6”/0-150mm .0005’’/.01mm $89.90 $67.00

Save 25%

•Resolution: 0.01mm/0.0005"•Power supply from solar energy under light•Buttons: zero, inch/mm•Battery SR54, automatic power off•Data output•Meet DIN862, hardened stainless steel construction

Save25%

•Made of hard plastic•Resolution: 0.01mm/0.0005"•Buttons: zero, power on/off, inch/mm•Battery CR2032, with one spare battery, automatic power off •Packed in plastic box

Order No. Range Resolution List Our Price1139-150 0-6”/0-150mm .0005’’/.01mm $20.70 $15.00

Insize Digital Calipers

• Data output• Resolution: 0.01mm/0.0005"• Buttons: zero, power on/off, inch/mm• Battery SR44, with one spare battery• Meet DIN862, hardened stainless steel construction

Order Measuring Depth List Our No. Range Make Rod Price Price

1112-150 6”/150mm With output Rectangular $49.90 $35.001112-200 8”/200mm With Output Rectangular $67.30 $49.001112-300 12”/300mm With Output Rectangular $101.00 $75.00

Save25%

Mitutoyo Coolant Proof Calipers IP67IP67Carbide Tipped

Order No. Range Carbide List Our Price500-735-10 0-6”/0-150mm OD $320.00 $240.00500-736-10 0-8”/0-200mm OD $356.00 $265.00500-737-10 0-6”/0-150mm ID/OD $409.00 $305.00500-738-10 0-8”/0-200mm ID/OD $416.00 $310.00

Save25%

• Large LCD display • Coolant Proof (IP67 Rating)• Imperial/Metric conversion • Data output• Models 500-735-10 and 500-736-10 feature External Tungsten Carbide tipped jaws

• Models 500-737-10 and 500-738-10 feature External and Internal Tungsten Carbide tipped jaws. Resolution .01mm/.0005’’

Order Measuring Depth List OurNo. Range T ype Rod Price Price

110801 6”/150mm No output Rectangular $96.00 $65.00110802 8”/200mm No output Rectangular $130.00 $89.00110803 12’’/300mm No output Rectangular $145.00 $99.00

Inspec Digital Calipers IP67

Save30%



4


18EWR Waterproof Calipers IP65

Order Measuring List Our No. Range Price Price 4112705 0-12”/0-300mm $625.00 $530.00

4112713 0-20”/0-500mm $1150.00 $975.00 4112715 0-30”/0-750mm $1600.00 $1360.00 4112717 0-40”/0-1000mm $1980.00 $1680.00

• Round Measuring tips for inside measurement• Resolution .0005’’/.01mm• RS232 Output

Order Measuring List Our No. Range Price Price 4112704 0-12”/0-300mm $676.00 $573.00

4112712 0-20”/0-500mm $1280.00 $1088.00 4112714 0-30”/0-750mm $1750.00 $1487.00 4112716 0-40”/0-1000mm $2140.00 $1819.00

• Measuring blades for outside measurement• Round Measuring tips for inside measurement• Resolution .0005’’/.01mm• RS232 Output

Save 15%

Save20%

18EX Waterproof Calipers IP65

• Large LCD Display. Data Output• Accuracy 12’’ .00012’’, 18’’ .00012’’, 24’’ .0002’’, 40’’ .00028’’

Mitutoyo Heavy Duty Calipers Mitutoyo Heavy Duty Calipers

• Large LCD Display. Data Output• Accuracy 12’’ .00012’’, 18’’ .00012’’, 24’’ .0002’’, 40’’ .00028’’

No. Range List Price Our Price500-505-10 0-18”/0-450mm $731.00 $584.00500-506-10 0-24”/0-600mm $803.00 $642.00500-507-10 0-40”/0-1000mm $1550.00 $1240.00

No. Range List Price Our Price

550-341-10 0-12”/0-300mm $740.00 $592.00

550-223-10 0-18”/0-450mm $854.00 $683.00550-225-10 0-24”/0-600mm $952.00 $761.00550-227-10 0-40”/0-1000mm $1710.00 $1368.00

Save20%

Save20%

Order Measuring List Our No. Range Price Price 111-502 0-12”/0-300mm $234.00 $115.00

111-503 0-16”/0-400mm $324.00 $225.00

111-505 0-24”/0-600mm $699.00 $499.00

111-507 0-40”/0-1000mm $934.00 $655.00

111-508 0-60”/0-1500mm $2390.00 $1560.00

111-509 0-80”/0-2000mm $3334.00 $1950.00

Inspec Calipers

• Round Measuring tips for inside measurement• Resolution .0005’’/.01mm• RS232 Output

Save50%

5


Mitutoyo Dial Calipers TiN Coated

Order No. Size Graduation Range List Our Price505-675 0-6” .001’’ .1’’/rev $115.00 $80.00505-676 0-8” .001’’ .1’’/rev $168.00 $117.00505-720* 0-12” .001’’ .2’’/rev $234.00 $169.00505-681 0-150mm .01mm 1mm/rev $97.20 $79.00505-671 0-150mm .02mm 2mm/rev $145.00 $116.00505-682 0-200mm .01mm 1mm/rev $183.00 $146.00505-672 0-200mm .02mm 2mm/rev $167.00 $133.00505-673* 0-300mm .02mm 2mm/rev $255.00 $204.00

Save upto 30%

• High precision jewelled bearing mechanism• Thumb wheel and locknut• Accuracy0-6" 0.001 Graduation ± 0.001"0-12" 0.001 Graduation ± 0.002"

**Not Titanium but Molybdenum Disulfide coated

Tesa Brown & Sharpe Dial Calipers

Order No. Size Graduation Range List Our Price599-579-4 0-6” .001’’ .1’’/rev $143.00 $120.00599-579-5 0-6” .001’’ .1’’/rev $143.00 $120.0005.20002 0-6” .001’’ .1’’/rev $158.00 $134.0005.10008 0-150mm .02mm 2mm/rev $138.00 $117.00

Save 15%

•Anti-Backlash, Shock-Proof Design •Covered Stainless Steel Rack •Measures Inside, Outside, Depth & Step •.100"/2mm per Revolution •Adjustable Zero Set and Slide Lock •1.25" Diameter Rotating Dial w/Lock

599-579-4 is Brown & Sharpe. Inch models have a white face

599-579-5 is Brown & Sharpe. Inch models have a black face

05.20002 is Tesa Inch model has a white face

Etalon Dial Calipers

Order No. Size Graduation Range List Our Price75.116550 0-6” .001’’ .1’’/rev $158.00 $125.0075.115821 0-150mm .02mm 2mm/rev $138.00 $110.00

16U Dial Calipers

Order No. Size Graduation Range List Our Price4107900 0-6” .001’’ .1’’/rev $113.00 $96.004107005 0-150mm .01mm 1mm/rev $106.00 $90.004107107 0-150mm .02mm 2mm/rev $91.50 $77.00

• Shockproof movement • Covered rack • Slide and beam are both made of hardened stainless steeel • Large, high contrast dial face• 4107900 has a black face • Metric white face

Save 15%

Save 20%

Inspec Dial Calipers

Order No. Size Graduation Range List Our Price171-133A 0-6” .001’’ .1’’/rev $58.00 $29.00171-132A 0-150mm .02mm 2mm/rev $58.00 $29.00

Save 50%

• Shock proof dial indicator, adjustable bezel, with bezel locking screw • Meet DIN862, hardened stainless steel construction, satin chrome finish beam

scale, with locking clamp and thumb wheel

• Measuring jaws, cursor knife edges and beam are hardened and stabilized.

• Jaw length 1.57" external, .57" internal. • Hardened stainless steel rack with precision ground teeth. • Shockproof indicator movement, anti-backlash rack and pinion. • Inch model has black face



6


Mitutoyo Vernier Calipers Top Locking Screw

Order No. Size Graduation List Our Price530-312 6”/150mm .001’’/.02mm $92.90 $69.00530-118 8”/200mm .001’’/.02mm $111.00 $83.00530-119 12”/300mm .001’’/.02mm $207.00 $155.00

• Depth bar• Beam & slide made of hardened stainless steel.• Main and vernier scales satin chrome plated.• Lapped Measuring faces

Save 25%

Mitutoyo Heavy Duty Vernier Calipers

Order No. Size Inside Measurement List Our Price160-125 12”/300mm 0.3’’/10mm $431.00 $323.00160-119 18”/450mm 0.5’’/12.5mm $658.00 $493.00160-103 24”/600mm 0.5’’/12.5mm $794.00 $595.00160-106 40”/1000mm 1’’/25.4mm $1470.00 $1100.00160-112 60”/1500mm 1’’/25.4mm $2850.00 $2137.00160-115 80”/2000mm 1’’/25.4mm $3820.00 $2865.00

• Beam & slide made of hardened stainless steel.• Main and vernier scales satin chrome plated.• Lapped Measuring faces• Round faced jaws for inside measurement• Graduated .001’’/.02mm

Save 25%

Order Measuring Type List Our No. Range Price Price

4126600* 0-6”/0-150mm 30EW $533.00 $370.00

4126601* 0-12”/0-300mm 30EW $640.00 $448.004126700 0-6”/0-150mm 30ER $425.00 $360.00

4126701 0-12”/0-300mm 30ER $490.00 $415.004126702 0-20”/0-500mm 30ER $650.00 $550.00

4126600 30EW

30ER Depth Calipers IP67

4126700 30ER

Mitutoyo Digimatic Depth Gage IP67

• Resolution .0005’’/.01mm• Data Output

Order Measuring List Our No. Range Base Price Price

571-261 0-6”/0-150mm 4’’ $441.00 $352.00

571-262 0-8”/0-200mm 4’’ $489.00 $391.00

Save 20%

Free40 page Engineers Reference Book with

every Mitutoyo Depth Gage

Save upto 30%

• Resolution .0005’’/.01mm. RS232 Output. • Base 85mm x 8.5mm. • Supplied with 1.5mm x 5mm pin. * While supplies last

16GN Vernier Calipers

Order No Size Graduation List Our Price4100670 6”/150mm .001’’/.02mm $50.00 $39.004100671 8”/200mm .001’’/.02mm $91.00 $72.004100672 12”/300mm .001’’/.02mm $209.00 $165.00

Save 20%

7


PAV Digital Depth Gage

Order Measuring List Our No. Range Base Price Price 30-220-8 0-8”/0-200mm 6.3’’ $2355 $2095.00

30-221-6 0-16”/0-450mm 6.3’’ $2545 $2289.00

• Technical data • Measuring range 0 - 200 mm • Instrument accuracy according DIN 862 • Measuring range 0 - 400 mm • Instrument accuracy according DIN 862 • Resolution 0,01 /.0005’’• Repeatability 0,01 mm • Measuring unit mm / inch • Length of base160 mm • Packed in Wooden case

Save10%

30EWD Depth Calipers IP67With Offset measuring faces

• With Offset measuring faces for groove measurement.• Resolution .0005’’/.01mm• RS232 Output

Order Measuring List Our No. Range Base Price Price 4126517 0-8”/0-200mm 3.9’’ $550.00 $495.00

4126518 0-12”/0-300mm 6’’ $675.00 $605.00

Save upto 10%

30EXN Depth Calipers with interchangeable Anvils

Save 15%

• Digital Depth Gage with disc anvil for groove measurement. • MarConnect data output (USB, Opto RS232C or Digimatic) • .0005’’/.01mm• RS232 Output• Base 85mm x 8.5mm• Supplied with 3 contact points

Order No. Range List Our Price

4126400* 0-4”/0-100mm $470.00 $399.00

4126512** 0-4”/0-100mm $489.00 $415.00* Caliper not IP67 ** Caliper IP67

Mitutoyo Digimatic Depth Gage

Graduation .001’’527-111

571-211-10

Order Measuring List Our

No. Range Base Price Price 571-211-20 0-6”/0-150mm 4’’ $354.00 $283.00

571-212-20 0-8”/0-200mm 4’’ $381.00 $304.00571-213-10 0-12”/0-300mm 4’’ $439.00 $351.00571-215-10 0-24”/0-600mm 4’’ $783.00 $626.00571-216-10 0-30”/0-750mm 4’’ $851.00 $680.00571-217-10 0-40”/0-1000mm 4’’ $992.00 $793.00527-111 0-6” 4’’ $354.00 $283.00

527-112 0-8” 4’’ $381.00 $304.00

527-113 0-12” 4’’ $439.00 $351.00

Resolution .0005’’/.01mmData Output

Save 20%

8


Insize Digital Depth Gage

Order Measuring List Our No. Range Base Price Price 1141-150 0-6”/0-150mm 4’’ $67.40 $49.00

1141-200 0-8”/0-200mm 4’’ $88.80 $65.001141-300 0-12”/0-300mm 4’’ $189.90 $140.00

Save 25%

Insize Gear Tooth Calipers

Order No. Range List Our Price 1181-M30 M1-30mm / 25 -.8TPI $367.00 $293.001181-M50 M1-50mm / 5 -.5TPI $649.00 $519.00

Save20%

• Resolution: 0.01mm/0.0005" • The vertical scale measures the depth of teeth from

the top to the pitch line • The horizontal scale measures the thickness of

teeth in the pitch line • Carbide tips, with fine adjustment

• Resolution: 0.01mm/0.0005" • Buttons:zero, power on/off, inch/mm • Data output• Meet DIN862, made of hardened stainless steel

Mitutoyo Depth Gages

Order No. Range Base List Our Price

547-217 0-8”/0-200mm 2.5’’ $430.00 $344.00

7217S 0-8” 2.5’’ $304.00 $243.00

Save20%

• 547-217 Resolution 0.00005’’/.001mm. • Data Output• 7217S Graduation 0.001’’

Mitutoyo Digimatic Depth Micrometer


329-350 0-6”/0-150mm 4’’ $527.00 $421.00

329-351 0-12”/0-300mm 4’’ $648.00 $518.00


129-126 0-3” 2.5’’ $139.00 $110.00

129-116 0-6” 4’’ $216.00 $172.00

129-150 0-12” 4’’ $372.00 $297.00

Save20%

Save20%

• Accuracy: Micrometer Head ± 3µm • Measuring Faces• Flatness - (reference face/bottom face of base) 100mm/4" 2µm• Flatness - (measuring face of rod) 0.3µm• Parallelism between reference face and measuring face (4+L/50)µm • Zero point error of rod ± (2+L/75) µm • Resolution .00005’’/.001mm Data Output

Mitutoyo Depth Micrometer

• 4mm diameter measuring rod• 2 base sizes available• Ratchet performs uniform and consistent readings• Clear graduations on satin chrome finish• Zero adjustable thimble• Graduation .001’’

Free40 page Engineers Reference

Book with everyMitutoyo Depth Micrometer


Order No. Range Grad Scale List Our Price1410S .25" .001" 0-100 $96.20 $72.00 1411S .25" .001" 0-50-0 $96.20 $72.00 1570S .075" .0005" 0-30 $115.00 $86.00 1571S .075" .0005" 0-15-0 $115.00 $86.00 1802S-10 .025" .0001" 0-10 $143.00 $107.00 1803S-10 .025" .0001" 0-5-0 $149.00 $111.00

Mitutoyo Dial Gages 1.6’’ Face

Save25%

• Face diameter 1.5"• Hardened stainless steel spindle• Machine ground rack gear for increased accuracy• Remarks: R/C = Revolution Counter, J = Jewelled • AccuracyAll models ± 0.001"

Mitutoyo Dial Gage 2.25’’ Face

Order No. Range Grad Scale List Our Price2414S .5" .001" 0-100 $98.35 $68.00 2415S .5" .001" 0-50-0 $98.35 $68.00 2416S 1" .001" 0-100 $110.00 $77.00 2417S 1" .001" 0-50-0 $115.00 $80.002424S-19 2" .001" 0-100 $197.00 $137.00 2803S-10 .025’’ .0001’’ 0-5-0 $143.00 $100.002923S-10 .050" .0001" 0-5-0 $143.00 $100.002358S-10 .5’’ .0001’’ 0-10 $197.00 $137.002046S 10mm .01mm 0-100 $102.00 $71.00 2109S-10 1mm .001mm 0-100-0 $179.00 $125.00

Save30%

Order No. Brand Dial Range Scale List Our Price 321-211 Inspec 1.6’’ .25" 0-100 $30.00 $15.00321-235 Inspec 2.3’’ 1" 0-100 $30.00 $15.002304-502 Insize 1.6’’ .25" 0-100 $34.00 $27.00 2307-05 Insize 2.3’’ 1" 0-100 $25.20 $20.00 2307-1 Insize 2.3’’ 1" 0-100 $25.20 $20.002307-2 Insize 2.3’’ 2" 0-100 $25.20 $20.00

Only $15

Save up to 50%

Insize/Inspec Dial Gages

•Bezel diameter 2.3'', stem diameter 3/8''•Lug back• With bezel locking clamp and tolerance index• Aluminum body• Meet ANSIB89.1.10• Graduation .00122

Order No. Range Depth Anvils List Our Price511-521 1.8-.40’’/45-100mm 6’’ 12 $1030.00 $875.00511-522 4.0-.6.4’’/100-160mm 6’’ 13 $1080.00 $915.00

Save15%

Mitutoyo Digimatic Bore Gage


Book with everyMitutoyo Bore Gage

• No mechanical transmitter is used resulting in no loss of accuracy compared with analogue bore gages

• Can be extended using extensions to measure holes up to 2000mm deep

• Digital-Analogue Display• Nominal, Upper and Lower Limits can be easily set• 320º Rotating Bezel Display• Display also pivots through 90º for easy viewing• Easy to operate with special bore measurement

functions• ABSolute Precision Function• IP53 Dust/Water/Oil Protection• Resolution .00005’’/.001mm

9

• Magnetic resistant • Two-way action – no reversing lever • Dovetail and adjustable stem adaption • Carbide contact point swivels 210° • Extremely low measuring pressure • Ball bearing and jewelled movement • With revolution counter

10


Mitutoyo Dial Bore Gages

Order No. Range Grad Depth Anvils List Our Price511-212 .24-.40’’ .0001’’ 2’’ 9 $562.00 $449.00511-206 .40-74’’ .0001’’ 4’’ 9 $584.00 $467.00511-163 .70-1.4’’ .0001’’ 4’’ 9 $367.00 $293.00511-164 1.4-2.5’’ .0001’’ 6’’ 6 $358.00 $308.00511-166 2.0-6.0’’ .0001’’ 6’’ 12 $391.00 $312.00511-187 4-6.5’’ .0001’’ 6’’ 13 $517.00 $413.00511-188 6.5-10’’ .0001’’ 10’’ 6 $582.00 $465.00511-189 10-16’’ .0001’’ 10’’ 6 $693.00 $554.00

Order No. Range Graduation List Price Our Price511-911 0.7-6’’ .0005’’ $870.00 $696.00511-912 0.7-6’’ .0001’’ $917.00 $733.00511-901 18-150mm .01mm $870.00 $696.00511-902 18-150mm .001mm $917.00 $733.00

Mitutoyo Dial Bore Gage Sets

Order No. Range Grad Face Face Color Stylus List Our Price599-7029-5 .03" .001" 1’’ Black .5’’ $153 $129.00599-7030-5 .03" .0005" 1’’ Black .5’’ $155 $119.00599-7031-5 .03" .0005" 1.5’’ Black .5’’ $172 $143.00

599-7032-5 .008" .0001" 1’’ Black .5’’ $208 $173.0018.20007 .03" .0005" 1.5’’ White .5’’ $171 $145.0018.20009 .02" .0005" 1.5’’ White 1.437’’ $220 $187.0018.20012 .008" .0001" 1.5’’ White .5’’ $196 $165.0018.20013 .008" .00005" 1.5’’ White .5’’ $272 $230.0018.10005 0.8mm .01mm 28mm Yellow 12.5mm $119 $100.00

Indicator comes with one carbide tip contact point,.080" , one 1/2" long x .250" diameter extension withdovetail , one contact point wrench

Tesa / Brown & Sharpe Best-Test Indicators

Order No. Code Range Grad Stylus Face List Price Our Price74.111370 312B-1 0.060’’ .0005’’ 0.65’’ 1.5’’ $238.00 $214.0074.111371 312B-2 0.060’’ .0005’’ 0.65’’ 1.2’’ $236.00 $212.0074.111965 312B-15 0.060’’ .0005’’ 2.675’’ 1.5’’ $329.00 $296.0074.111374 312B-20 0.060’’ .001’’ 0.65’’ 1.2’’ $233.00 $209.0074.111372 312B-3 0.016’’ .0001’’ 0.65’’ 1.5’’ $297.00 $267.0074.111373 312B-4 0.016’’ .0001’’ 0.65’’ 1.2’’ $293.00 $263.0074.111366 312-1 1.6mm .01mm 16.5mm 37.5mm $238.00 $214.00

MagneticBase witheach InterapidIndicator Total height 4’’Base size 30mm

Free

Interapid Test Indicators

Save20%

Save20%

Save15%

• 511-911 With dial gage 2922S .0005’’ supplied• 511-912 With dial gage 2922S .0001’’ supplied• 511-901 With dial gage 2046S .01mm supplied• 511-902 With dial gage 2109S-10 .001mm supplied

Save10%

11


Magnetic Basewith each MahrIndicator

The new generation of Test Indicators with a water proof dial

Order No. Code Range Grad Acc Stylus Face List Our Price

4305950 801S 0.030’’ .0005’’ .0003’’ 0.57’’ 1.1’’ $144.00 $120.004307950 801SG 0.030’’ .0005’’ .0003’’ 0.57’’ 1.5’’ $163.00 $135.004308960 801SM 0.008’’ .0001’’ .00012’’ 0.57’’ 1.1’’ $175.00 $145.004308970 801SGM 0.008’’ .0001’’ .00012’’ 0.57’’ 1.5’’ $183.90 $155.004308985 801SGE 0.008’’ .00005’’ .00012’’ 0.57’’ 1.5’’ $175.00 $145.004306950 801SL 0.020’’ .0005’’ .00012’’ 1.62’’ 1.1’’ $177.00 $150.004306960 801SGL 0.020’’ .0005’’ .00012’’ 1.62’’ 1.5’’ $201.00 $170.004305200 800S 0.8mm .01mm .008mm 14.5mm 27.5mm $105.00 $89.00

The sealed unit makes the workings impervious to liquids. These indicators are ideal for use in a workshop environment.

Code Range Grad Stylus List Our Price 800SDZ 0.008’’ .0001’’ 0.57’’ $145 $70.00While supplies last

Saveover 50%

Puppitast Indicator

The sealed indicator makes the workingsimpervious to liquids. These indicators areideal for use in a workshop environment.

The most direct gear train design ever applied to Test Indicators means– higherlevels of sensitivity, reliability, repeatability and accuracy throughout tool life.

Mitutoyo Quick-Set Test Indicators

Order No. Range Grad Stylus Face List Price Our Price513-402 0.030’’ .0005’’ 0.83’’ 1.62’’ $116.00 $87.00513-412 0.030’’ .0005’’ 1.34’’ 1.62’’ $166.00 $124.00513-403 0.008’’ .0001’’ .58’’ 1.62’’ $150.00 $112.00513-404E 0.8mm .01mm 20.9mm 1.62’’ $117.00 $87.00SetsOrder No. Range Grad Stylus Face List Price Our Price513-402T 0.030’’ .0005’’ 0.83’’ 1.62’’ $138.00 $103.00513-412T 0.030’’ .0005’’ 1.34’’ 1.62’’ $192.00 $144.00513-403T 0.008’’ .0001’’ .58’’ 1.62’’ $177.00 $132.00513-404T 0.8mm .01mm 20.9mm 1.62’’ $139.00 $104.00

Girod No Range Grad Stylus Face List Our PriceGT1252A 0.030’’ .0005’’ 1.1’’ 0.472’’ $126 $95.00GT1452A 0.030’’ .0005’’ 1.5’’ 0.472’’ $146 $110.00GT1253A 0.008’’ .0001’’ 1.1’’ 0.472’’ $146 $110.00GT1453A 0.008’’ .0001’’ 1.5’’ 0.472’’ $159 $120.00GT1254A 0.030’’ .0005’’ 1.1’’ 1.41’’ $166 $125.00GT1454A 0.030’’ .0005’’ 1.5’’ 1.41’’ $186 $140.00While supplies last

Save20%

Girod Lever Indicators

Monobloc body design has 7 fine jeweled bearings isolated in ashock-proof assembly. Independent, interchangeable movementtransmits measuring value via rack & pinion.Rugged anti-magnetic one-piece housing.Auto-reverse mechanism Stylus Length 0.5’’.

Save25%


Book with everyMitutoyo Lever indicator

Save15%

Free

12


Tesa B&S Digital Micrometer No Output

• Resolution 0.00005”/.001mm• 06.030010 is IP40• All other Micrometers are IP 54

Tesa No. B&S No. Range List Price Our Price

06030010 599-100 0-1.2”/0-30mm $258.00 $219.0006030020 599-125 0-1.2”/0-30mm $309.00 $259.0006030021 599-126 1-2”/25-50mm $374.00 $311.0006030022 599-127 2-3”/50-75mm $437.00 $325.00

Save15%

Micrometer 40 EW, IP65

• Micromar 40 EW, Protected against water, oil and dust according to protection class IP65.

4151700 is IP654151600 is IP54

Order No. Range Resolution List Price Our Price4151700 0-1”/0-25m 00005” $278.00 $208.00

Save25%

Mitutoyo Quickmike IP54 Mitutoyo Quantum Micrometer

• Ultra-Fast and Water resistant, • Large LCD display for error free external measurements

Order No. Range Output List Price Our Price293-185 0–1"/0–25mm No $202.00 $149.00293-186 1–2"/25-50mm No $231.00 $179.00293-180 0–1"/0–25mm Yes $235.00 $188.00293-181 1–2"/25–50mm Yes $268.00 $214.00293-140 0–25mm Yes $235.00 $164.00293-141 25–50mm Yes $268.00 $187.00

Order No. Range List Price Our Price

293-676 0–1.2"/ 0–30mm $530.00 $424.00

293-677 1.2-2"/25–55mm $579.00 $463.00

293-678 2-3.2"/ 50–80mm $630.00 $500.00293-679 3-4.2"/ 75–105mm $686.00 $545.00


with every Mitutoyo Micrometer

Saveup to30%

• 0-30mm in just 3 thimble revolutions• ABSolute feature • Non rotating Spindle• IP-54 Level Water Resistance • Tungsten Carbide tipped

Save20%

Insize Digital Micrometer

Resolution 0.00005”/.001mm

Order No. IP Rating Range List Price Our Price

3108-25 IP54 0-1”/0-25mm $106.00 $84.003108-50 IP54 1-2”/25-50mm $118.00 $94.003108-75 IP54 2-3”/50-75mm $135.00 $107.003108-100 IP54 3-4”/75-100mm $148.00 $118.003108-125 IP54 4-5”/100-125mm $171.00 $137.003108-150 IP54 5-6”/125-150mm $194.00 $155.00

Save20%


with every Mitutoyo Micrometer

13


Order No. Range Remarks List Price Our Price293-340 0–1"/0–25mm Ratchet stop $158.00 $118.00293-344 0–1"/0–25mm Ratchet Thimble $158.00 $118.00293-345 1–2"/25–50mm Ratchet Thimble $216.00 $154.00293-346 2–3"/50–75mm Ratchet Thimble $283.00 $212.00293-347 3-4"/75-100mm Ratchet Thimble $305.00 $228.00

Mitutoyo Micrometers No Output

• Resolution .00005” / .001mm• Origin setting, Inch/mm selection, Zero-setting, Auto-sleep. • No Output

Mitutoyo Micrometers With Output

Order No. Range Remarks List Price Our Price293-334 0–1"/0–25mm Ratchet Thimble $228.00 $179.00293-331 1–2"/25–50mm Ratchet Stop $251.00 $199.00293-332 2–3"/50–75mm Ratchet Stop $310.00 $248.00293-333 3-4"/75-100mm Ratchet Stop $334.00 $267.00293-350 3-4"/75-100mm Ratchet Stop $413.00 $330.00293-351 5-6"/125-150mm Ratchet Stop $430.00 $344.00

• Resolution .00005” / .001mm• Origin setting, Inch/mm selection, Zero-setting, Auto-sleep. • With SPC Output

Save20%

Save25%


Book size with everyMitutoyo Micrometer


Book with everyMitutoyo Micrometer

Mitutoyo Micrometer MDC-Lite

A friction thimble for aconstant measuring force.No spindle clamp. No data output

Order No. Range Resolution List Price Our Price

293-832 0-1”/25.4mm 0.00005”/.001mm $123.00 $90.00


Book with everyMitutoyo Micrometer

Save25%

Mitutoyo Digital Uni Micrometers

Order No. Range List Price Our Price 317-351 0-1”/0-25mm $472.00 $377.00317-352 1-2”/25-50mm $481.00 $38400

.• SPC Output. • Resolution .00005’’/.001mm

Inspec Digital Uni Micrometers

Order No. Range List Price Our Price 232-11-410 0-1”/0-25mm $250.00 $150.00

.• SPC Output• Resolution .00005’’/.001mm

Save20% Save

40%

14


Mitutoyo Micrometers Reading .0001’’

Order No. Ra Grad Type List Our Price 101-117* 0-1” .0001” Friction Timble $118.00 $88.00102-327** 0-1” .0001” Ratchet Timble $144.00 $108.00103-135 0-1” .0001” Friction Timble $107.00 $79.00103-131 0-1’’ .0001’’ Ratchet Timble $106.00 $79.00103-260-99 0-1’’ .0001’’ Ratchet Stop $76.40 $57.00103-113 0-1’’ .0001’’ No Ratchet Stop $68.65 $51.00103-132 1-2” .0001” Ratchet Timble $110.00 $82.00

Mitutoyo Micrometers Reading .001’’

Carbide faces, positive lockingclamp, ratchet stop for exactrepetitive readingsSetting Standards are supplied

Carbide faces, positive locking clamp. 103-113 has no locking clamp.

Tesa Micrometers Reading .0001’’

Order No. Range Grad List Our Price 01.20101 0-1” .0001” $182.00 $154.0001.20102 1-2” .0001” $293.00 $249.0001.20103 2-3” .0001” $320.00 $272.0001.20104 3-4” .0001” $345.00 $293.0001.10101 0-25mm .01mm $148.00 $133.00

Save25%

Save25%

Save15%


with everyMitutoyo Micrometer



Order No. Range Grad List Price Our Price103-105* 0-1” .001” $59.35 $29.00103-177 0-1” .001” $97.20 $69.00103-178 1-2’’ .001’’ $113.00 $84.00103-179 2-3” .001” $130.00 $97.00103-180 3-4’’ .001’’ $151.00 $113.00103-181 4-5” .001” $167.00 $125.00103-182 5-6’’ .001’’ $182.00 $136.00

*Supplied in cardboard box.While supplies last

Mitutoyo Micrometers

Order No. Range Grad List Our Price 102-711 0-1” .001” $133.00 $99.00117-712 1-2’’ .001’’ $162.00 $121.00102-717 0-1” .0001” $138.00 $103.00117-718 1-2’’ .0001’’ $180.00 $135.00117-707 0-25mm .001mm $138.00 $103.00117-708 25-50mm .001mm $162.00 $121.00

Save25%



External screw type micrometer with combined ratchet stop

Micrometers 40A Reading .0001’’Order No. Range Grad List Our Price4134900 0-1” .0001” $79.50 $63.004134901 1-2’’ .0001’’ $123.00 $98.004134902 2-3” .0001” $152.00 $121.004134903 3-4’’ .0001’’ $175.00 $140.004134904 4-5” .0001” $220.00 $176.004134905 5-6’’ .0001’’ $245.00 $196.00

Chrome plated steelframe. Carbide tippedHeat Insulators. Rapiddrive with integratedratchet

Save20%

*101 series satan chrome tapered on anvil for hard to reachplaces.** 102 series heat insulated satan chromed tapered on anvil sidefor hard to reach places.

15


Universal Micrometer 40EWV

• Digital micrometer non rotating spindle range 0-25mm • Included in set is pair of flat anvils 6.5mm• Reduced flat anvils 2mm, Disc anvils 11mm• Spherical Anvils, Conical shaped anvils, Wedge shape anvils

Order No. Range Resolution List Price Our Price

4151710 0-1”/25.4mm 0.00005”/.001mm $1490.00 $1265.00

Mitutoyo Indicating Micrometers

Order No. Range Grad Dial List Our Price 510-131 0-1” .0001” .00005’’ $757.00 $567.00510-121 0-25mm .001mm .001mm $757.00 $567.00

Order No. Range Grad Dial List Our Price 72.109837 0-1” .0001” .00005’’ $1098.00 $988.0072.109843 1-2’’ .0001’’ .00005’’ $1135.00 $1020.0072.109837 0-25mm .001mm .001mm $1098.00 $988.0072.109857* 0-.8” .0001” .00005’’ $1147.00 $1032.00*Reduced anvil .080’’/2mm length 5mm

Etalon Indicating Micrometers

Mitutoyo Mechanical Counter Micrometers

Accuracy 0-3’’ .0001’’3-4’’ .00015’’

Mitutoyo Micrometer Stands

Order No. Range Type List Our Price 156-102 5-12” Vertical $555.00 $388.00156-101 0-4’’ adjustable angle $98.20 $68.00156-105 0-1’’ Fixed angle $69.90 $48.00

Order No. Range Grad List Price Our Price 193-211 0-1” .0001” $166.00 $132.00193-212 1-2’’ .0001’’ $196.00 $155.00193-213 2-3” .0001” $218.00 $174.00193-214 3-4’’ .0001’’ $242.00 $193.00

Save30%

Save20%

Save15%

Save25% Save

10%


size with everyMitutoyo Micrometer

Spring loaded retractable anvil for easy positioning and highaccuracy measurements. Deviation from nominal can be readdirect from dial with tolerance hands to assist.

• Instrumental Error: ± 0.000015" • Spindle Feed Error: 0.00015"• Dispersion of Indication: 0.00002" • Indicating Error: 0.00005"

16


• SPC Output• Average battery life 20,000 hours using SR-44battery (541980)

Supplied with 8mm to 3/8’’ Bushing Supplied with 8mm to 3/8’’ Bushing

• Resolution .00005”.001mm • 8mm Stem

Order No. Type Range Stem List Our Price4337020 1086 .5" / 12.5mm 8mm $489 $405.004337050 1086 .5" / 12.5mm 3/8’’ $489 $415.004337021 1086 1" / 25mm 8mm $562 $465.004337051 1086 1" / 25mm 3/8’’ $562 $475.004337022 1086 2" / 50mm 8mm $856 $715.004337023 1086 4" / 100mm 8mm $1080 $900.00

Digital Indicators .00005’’

Order No. Range Resolution List Our Price

01930230 .5"/12.7mm .0005’’/.01mm $255.00 $215.0001930231 .5"/12.7mm .00005’’/.001mm $424.00 $350.0001930232* .5"/12.7mm .00005’’/.001mm $460.00 $391.0001930256** .5"/12.7mm .00005’’/.001mm $523.00 $444.0001930257** 1"/25.4mm .00005’’/.001mm $606.00 $515.0001930258*** .5"/12.7mm .00005’’/.001mm $540.00 $459.00

* Digico is Rotatable & Tolerancing.IP54Waterproof with bellows.** Digico is Rotatable & Tolerancing with Min-Max features.*** Digico is Rotatable & Tolerancing with Min-Max features for

internal measurement like bore gages.Stems are 8mm

Tesa Digico Indicators

Save15%

Save15%

The unique design of the Sylvac 229 digitalindicator, utilizing a minimum of mechanicalparts, enables it to measure extremelyaccurately throughout its long travel and alsoto withstand the rigours of shop-floor use.The gages large, high visibility displaycombined with its many useful functions,accessed by two simple buttons, make it theindicator of choice by engineers throughoutthe world.•Direct Inch / Metric conversion•Preset •Zero setting •Memory hold •2 Memories Ref I / Ref II.•Direct RS 232 output•Bezel rotates through 270° •Replaceable lithium battery •Large 8.5mm digits Supplied with 8mm to 3/8’’ Bushing

Order No. Range Resolution Stem List Our Price 905-1681 6’’/50mm .00005’’/.001mm8mm $1990.00 $1740.00905-1671 6’’/50mm .0005’’/.001mm 8mm $1798.00 $1498.0054-520-905 6’’/150mm .0005’’/.01mm 3/8’’ $1798.00 $1573.00

Save12.5%

7

Mitutoyo Thickness Gages

Order no Range Res Throat List Our Price 547-300 .4"/10mm .0005’’ 1.2’’/30mm $401.00 $320.00547-320 .4"/10mm .0005’’ 4.8’’/120mm $413.00 $329.00547-400 .47"/12mm .00005’’ .8’’/10mm $742.00 $593.007300S 0.4’’ .001’’ 1.2’’ $118.00 $94.007304S 0-1’’ .001’’ 1.2’’ $143.00 $114.007326S 0.05’’ .0001’’ 1.2’’ $197.00 $157.00

547-300 547-400 7300S

Save20%

• Thumb lever to lift spindle• Measuring faces are hardened, ground and lapped• Large LCD display• Imperial/Metric conversion• ABSolute feature• Zero/ABS• Preset• Tolerance setting

Fowler Sylvac Digital Indicators 6'' travel

17


Order No. Range List Price Our Price543-272B 0-.5"/0-12.7mm $276.00 $136.00

Mitutoyo Digimatic Indicator .0005’’

Order No. Range Stem List Price Our Price543-683 0-.5"/0-12.7mm 3/8” $158.00 $125.00543-682 0-.5"/0-12.7mm 8mm $158.00 $120.00

Mitutoyo IDS Indicators .0005’’

• ON/OFF, 0 (Set display to zero), mm/inch. • Reversal of counting direction• Inductive measuring system, life of battery approx. 2 years. • Max measuring speed 1.5 m/sec (60“/sec) • Resolution .01mm/.0005’’

Save $140while present supplies last

Order No. Range Res Stem List Our Price

543-401B .5"/12.7mm .0005’’ 8mm $276.00 $220.00543-391B .5"/12.7mm .00005’’ 8mm $379.00 $303.00543-471B 1"/25mm .00005’ 8mm $507.00 $405.00543-402B .5"/12.7mm .0005’’ 3/8’’ $276.00 $234.00543-392B .5"/12.7mm .00005’’ 3/8’’ $379.00 $322.00543-472B 1"/25mm .00005’’ 3/8’’ $507.00 $430.00

• Resolution.0005"/0.01mm• Stem 3/8’’• Accuracy .0008’’

• Compact and economical design.• Provided with a data output port for connection

with the SPC system.• Operating temperature: 0°C–40°C• Membrane sealed face helps keep out

contaminants.• 0-1"/0-25.4mm measuring range• .0008" accuracy (20°C)]• .0005"/0.01mm

Mitutoyo IDU Digimatic Indicator with Absolute Encoder

• Large LCD Display• Absolute feature• Tolerance setting• Data output543-401B,543-391B & 543-471B gagessupplied with 8mm to 3/8’’ Bushing

Mitutoyo IDC Indicators

Save20%Save

50%

Save20%

Order No. Range Stem List Price Our Price575-123 0-1"/0-25mm 3/8” $158.00 $125.00


with everyMitutoyo Indicator

Order No. Type Readings Range XYZ Shank List Price Our Price 4304300 Digital .005mm -2 to 4mm 16mm $1020.0 $918.004304305 Digital .0001’’ .0787 to .157’’ 3/4’’ $1020.0 $918.004304310 Analogue .01mm -2 to 4mm 16mm $503.00 $452.004304315 Analogue .001’’ 0787 to .157’ 3/4’’ $503.00 $452.00

3D-Touch ProbeCan be used on MillingMachine and EDMMachines.Determines the zeroposition on a workpiece.Determines the centre of abore. Determines andcorrects the position of aworkpiece and measureslength and depth.

Save10%

Save20%

18


Mechanical Dial Comparators

1002 1003 1003XL 1004 1010 1050

Mechanical Dial Comparators Large Millimess

Order No. Range Anvil Travel List Our Price4450000 0-1”/0-25mm .080’’/2mm $1340 $11954450001 1-2.36”/25-60mm .080’’/2mm $1440 $12954450002 2-4”/50-100mm .100’’/2.5mm $1540 $13854450003 4-6”/100-150mm .100’’/2.5mm $1680 $15004450004 6-8”/150-200mm .100’’/2.5mm $1810 $1610Ceramic 840FC4450100 1-2.36”/25-60mm .080’’/2mm $1460 $13054450101 2-4”/50-100mm .100’’/2.5mm $1530 $1375

Indicator not supplied, choose fromthe list of indicators at the top ofthe page.840 F Anvil and spindle ishardened steel.840FC is either carbide or ceramic.Constant measuring force, as aresult of built in spring, thuseliminating user influence.

Order No. Name Range Grad List Our Price4335900 1002Z Supramess +/- .0010’’ .00002” $446.00 $395.004334900 1003Z Millimess +/- .0020’’ .00005’’ $201.00 $179.00 4333900 1004Z Compramess +/- .0050’’ .0001” $195.00 $170.004332900 1010Z Zentimess +/- .0100’’ .0005’’ $188.00 $168.004335000 1002 Supramess +/- .025mm .0005mm $446.00 $395.004334000 1003 Millimess +/- .050mm .001mm $201.00 $179.00 4334001 1003 Millimess XL +/- .130mm .002mm $201.00 $179.004333000 1004 Compramess +/- .250mm .005mm $195.00 $170.004332000 1010 Zentimess +/- .250mm .01mm $188.00 $168.004330000 1050Dezimess +/- 1.5mm .05mm $181.00 $159.00

Order No. Range Force List Our Price4455000 .39’’-1.18”/10-30mm 13.5N $2765 $24504455001 1.18’’-2.36”/30-60mm 13.5N $2940 $26354455002 2.36’’-4”/60-100mm 13.5N $2940 $26354455003 4’’-6”/100-150mm 15N $3289 $29604455004 6’’-8”/150-200mm 15N $3392 $30504455005 8’’-10”/200-250mm 15N $3531 $31754455006 10’’-12”/250-300mm 15N $3706 $3335

Indicator not supplied, choose fromthe list of indicators at the top of thepage.Carbide facesConstant measuring force, as a result of built inspring, thus eliminating user influence.Direct indication and evaluation ofmeasurement results Anvil Travel 0.7mm

Indicating Snap Gage 840F/840FC

Order No. Name Range Grad. Scale Division Over Travel Force List Our Price4339900 1000Z Millimess +/- .0020’’ .00005” .08’’ .2’’ 3.5N $717.00 $635.004338000 1000A Millimess +/- .100mm .001mm .001mm 4mm 3.5N $717.00 $635.004339000 1000B Millimess +/- .050mm .001mm .002mm 4mm 3.5N $717.00 $635.00

• Large Design• Easy to read dial.• Shockproof movement.• ewelled movement bearings.• Stem is 28mm

Save10%

Save10%

Save10%

840F

Indicating Snap Gages 840FS

Save10%

19


Kroeplin Electronic Gages

C110 Type B440 Type G230 Type

No. Range Resolution Contact Measuring Contact Contact List Our Point Depth Movable Fixed Price PriceC110 0-39’’/0-10mm .0002’’/.005mm Ball .59’’/1.5mm 1.37’’ .75’’ .73’’ $639.00 $540.00B440 0-1.57’’/0-40mm .001’’/.02mm Ball .118’’/3mm 4.33’’ .97’’ 1’’ $639.00 $540.00 B660 0-2.36’’/0-60mm .001’’/.02mm Ball .197’’/5mm 7.48’’ 1’’ .98’’ $639.00 $540.00 No. Range Resolution Contact Measuring Contact Contact List Our Point Length Movable Fixed Price PriceG102 2.5-12.5mm .0002’’/.005mm Chisel R 0,1 12mm 0,9mm 0,9mm $639.00 $540.00 G105 5-15mm .0002’’/.005mm Ball 0.6mm 35mm 2.5mm 2.5mm $639.00 $540.00 G210 10-30mm .0005’’/.01mm Ball 1.0mm 85mm 5.3mm 5.3mm $639.00 $540.00 G230 30-50mm .0005’’.01mm Ball 1.0mm 85mm 7.3mm 7.3mm $639.00 $540.00 G250 50-70mm .0005’’/.01mm Ball 1.0mm 85mm 8.5mm 8.5mm $639.00 $540.00 G270 70-90mm .0005’’/.01mm Ball 1.0mm 85mm 8.5mm 8.5mm $639.00 $540.00

Mitutoyo Dial Indicator Stands & Magnetic Bases

7003 215-505 7010S 7012-10 7019

Code Range No of Pins List price Our Price M0 .011 to .060” 50 $72.14 $64.80 M05 .0115 to .0605” 50 $72.14 $64.80 M1 .061 to .250” 190 $162.31 $145.00 M15 .0615 to .2505” 190 $162.31 $145.00 M2 .251 to .500” 250 $240.45 $216.00 M25 .2515 to .5005” 250 $240.45 $216.00M3 .501 to 625” 125 $282.54 $253.00M35 .5015 to .6255” 125 $282.54 $253.00

M4 .626 to .750” 125 $312.59 $280.00 M5 .751 to .832” 82 $530.91 $477.00 M6 .833 to .916” 84 $619.38 $557.00M7 .917 to 1.00” 84 $648.88 $583.00

Meyer Gage Pin Sets Class Z .0001”

Order No. Size Remarks List price Our Price7010S Magnetic Base Holds 8mm & 3/8’’ stems $124.00 $85.007012-10 Magnetic Flex Base Holds 8mm & 3/8’’ stems $180.00 $135.007019 Universal Mag Base Holds 8mm & 3/8’’ stems $205.00 $185.007003 58mm Serrated anvil Holds 3/8’’ stems $314.00 $235.00215-505 6x6’’ Grid Anvil 10’’ travel Holds 8/20mm & 3/8’’stems $1900.00 $1300.00

Save10%

Manufactured in USAAll members 2” long. Size deviation .0001”

Save upto 30%

Save15%

H

9

20


Save 35%

Mitutoyo Digimatic Height Gages

Mitutoyo Height Gages

• Presetting• Direction change• Data Hold• Data output • Accuracy• 0-300mm ± 0.04mm, 0-600mm ±0.05mm.• Resolution .0005’’/.01mm

Order Measuring List OurNo. Range Price Price4426100 14”/350mm $1270.00 $1140.004426101 24”/600mm $1650.00 $1475.00

• Data Hold• Data output RS232, USB• Accuracy0-300mm ± 0.04mm, 0-600mm ± 0.05mm.

• Resolution .0005’’/.01mm

Order Measuring List OurNo. Range Price Price570-312 12”/300mm $560.00 $440.00570-314 24”/600mm $1010.00 $795.00

Saveup to40%

Order Measuring List OurNo. Range Price Price192-150 12” $906.00 $724.00192-142* 24” $1630.00 $978.00192-152 24” $1630.00 $1304.00192-153 40” $3560.00 $2848.00

Save20%


with everyMitutoyo Height Gage

Digital Height Gage 814SR• Easy reading with dual directional up and

down mechanical digital counters and a dial• Counters can be reset at any point• Provided with feed wheel for easy coarse

feeding• Tungsten Carbide tipped scriber Accuracy0-12" ± 0.0015", 0-24" ± 0.002" 0-40’’ +/-.005’’ Graduation .001’’*While supplies last

• Imperial/Metric conversion• Zero/ABSolute• Origin setting• Preset• Coarse/fine feed switching• Tungsten Carbide tipped

scriber Accuracy0-12’’ ± 0.001’’, 0-24’’ ± .002’’, 0-40’’± .004’’

Order No Range SPC Output List Price Our Price192-630 0-12”/0-300mm No $1380.00 $1099.00192-632 0-24”/0-600mm No $2400.00 $1920.00192-633 0-40”/0-1000mm No $4540.00 $3632.00 192-670 0-12”/0-300mm Yes $1580.00 $1264.00192-672 0-24”/0-600mm Yes $2610.00 $2088.00 192-673 0-40”/0-1000mm Yes $4890.00 $3910.00 192-008 Touch Probe $740.00 $592.00

Mitutoyo Digimatic Height Gages

Save20%

Extreme accuracy, increased functionality and easeof use. The QM-Height delivers outstandingaccuracy of ±(2.8+5L/1000)µm to satisfy your mostcritical measurement needs. It measuresmaximum/minimum and displacement from thesurface or by increment. It also measuresinside/outside diameter via a unique process(detect the circle apex and process by tracingmeasurement).Additionally, all the measurements can be savedand recalled after measurement.Resolution: .001mm/.00005”

Mitutoyo QM 1-D Height Gage

Save10%

Order No. Range List Price Our Price518-221 0-14"/0-350mm $2680.00 $2399.00 518-223 0-24"/0-600mm $3480.00 $3130.00Shipping, Installation, Calibration and Training is extra

Save10%

21


Control panel with numerical display to 0.00001’/0.0001’’/ 0.001’’ Dynamic probing of the workpiece with a constant measuring force.bores or shafts using TESA’s unique device for automatic detection of the culmination point. Acoustic signal toacknowledge value capture, also conveniently programmable.Ability to measure parallelism errors. RS 232 data output. Accuracy .0001’’+.000003L

TESA-HITE Plus M, 2-D

Buy thisgage and we’ll

give you$500* worth ofprecision

hand tools ofyour choice

*at list price

Save10%

Order No. Description Range App Range 07.30045 Tesa Hite Plus 400 415mm/16” 570 mm /22” 07.30046 Tesa Hite Plus 700 700mm /28” 855 mm /34”07.30057* Tesa Hite Magna 400 415mm/16” 570 mm /22” 07.30058* Tesa Hite Magna 700 700mm /28” 855 mm /34”Order No. Description List Price Our Price07.30045 Tesa Hite Plus 400 $7374.00 $6620.0007.30046 Tesa Hite Plus 700 $8332.00 $7495.0007.30057* Tesa Hite Magna 400 $7882.00 $7050.0007.30058* Tesa Hite Magna 700 $8839.00 $7950.00.* models 07.30057 and 07.30058 come with printerShipping, Installation, Calibration and Training is extra

Wyler CLINOTRONIC with the large LCD display unit, the operating elements and the interface socket. Itmeasures just 4” long x 3” high x 1” wide. The Clinotronic provides a measuring capacity of +/- 45 degree. Fourprecisely machined exterior reference surfaces assure accuracy and repeatability of measurements in anyquadrant.

Fowler No. Wyler No Range Sensitivity Accuracy List Price Our Price54-635-601 015-Plus-XG45 +/- 45 degrees .02mm/m 2.0 min of arc +1 digit $1588.00 $1349.0054-635-602 015-Plus-XG30 +/- 30 degrees .02mm/m 1.5 min of arc +1 digit $1825.00 $1550.0054-635-603 015-Plus-XG10 +/- 10 degrees .02mm/m 1.0 min of arc +1 digit $1900.00 $1615.00

Wyler Fowler Clinotronic

Measuring base with flat contact faces. Simple adjustment of the zero-point and ofrollover errors (twist) of the main vial, due to an ingenious adjusting system. Excellentview on the vial from above and from the side. Transversal vial with a sensitivity of 2-5mm/m for easier handling of the level when measuring on horizontal shafts.Theprismatic bases are suitable for shaft diameters Ø 17 … Ø 160 mm, depending on thedimensions. A handle of precious wood eliminates the transfer and influence of thebody temperature.

Fowler No. Wyler No Type L X W XH Sensitivity Sensitivity Sensitivity List Price Our Price53-422-522 155S200-113-020 A-55 Engineers Level 200 x 43 x 41mm .02mm/m .0002’’/10’’ 5 seconds $1065.00 $905.0053-422-552 155S300-113-020 A-55 Engineers Level 300 x 51 x 51mm .02mm/m .0002’’/10’’ 5 seconds $1275.00 $1083.0053-422-525 155S200-113-050 A-55 Engineers Level 200 x 43 x 41mm .05mm/m .0005’’/10’’ 10 seconds $751.00 $638.0053-422-555 155S300-113-050 A-55 Engineers Level 300 x 51 x 51mm .05mm/m .0005’’/10’’ 10 seconds $918.00 $780.0053-422-058 158S100-343-050 A-58 Box Level 100 x 32 x 100mm .05mm/m .0005’’/10’’ 10 seconds $1226.00 $1042.0053-422-057 158S150-343-050 A-58 Boxs Level 150 x 40 x 150mm .05mm/m .0005’’/10’’ 10 seconds $1242.00 $1055.0053-422-059 158S200-343-050 A-58 Box Level 200 x 40 x 200mm .05mm/m .0005’’/10’’ 10 seconds $1696.00 $1440.00

Wyler Fowler Engineers Levels

Save15%

Save15%

22


TESA-HITE 1D 400 & 700 IP65

Order No Range Application range List Our Price07.30043 415mm /16” 570 mm /22” $4078.00 $3568.0007.30044 700mm /28” 855 mm /34” $5211.00 $4599.00 Transportation, Installation, Calibration and Training is extra

Control panel with numerical display to0,00001’/0.0001’’/ 0.001’’ Dynamic probing of the workpiece with aconstant measuring force.bores or shafts using TESA’s unique device for automatic detection of the culmination point.Acoustic signal to acknowledge value capture,also conveniently programmable.Ability to measure parallelism errors.RS 232 data output. Accuracy .0001’’+.000004L ( in inmicro inches)*

Buy this gage and we’ll give you$300*

worth of precision hand tools of your choice

*at list price

Save12.5%

Mitutoyo 2-D Height Gage

Order No Range Stroke List Our Price518-341A-21 972mm /38.6” 600mm/24’’ $7570 $6570.00Transportation, Installation, Calibration and Training is extra

The LH-600D offers exceptional accuracy anda comprehensive range of measurement, calculations and analysis functionsManual and Motorized.Pneumatic drive mechanismAccuracy: .000043+(.000024xL/24)Perpendicularity: .0002’’Resolution.000001’’/.00001’’/.0001’’/.001’’/.0001/.001mm

1-D Height Gage 816CL

Mahr 1-D height gage offers exceptionalaccuracy Manual and Motorized.Pneumatic drive mechanism.Accuracy: .00012’’+L/300.Perpendicularity: 14’’.0002’’.24’’ .00024’’, 40’’.0004’’Repeatability: .0006’’Resolution.00005’’/.00001’’/.0001’’/.001’’/.01’’Temperature compensation

Order No Range Application range List Our Price4429030 350mm /14” 520mm/20.47’’ $5,150 $4,635.00 4429031 600mm /24” 770mm/30.31’’ $5,700 $5,130.00Transportation, Installation, Calibration and Training is extra

1-D & 2-D Height Gage 816CLM

Mahr 1-D & 2-D height gage offersexceptional accuracy Manual and Motorized.Pneumatic drive mechanism.Accuracy : .00007’’+L/600.Perpendicularity : 14’’.0002’’.24’’.00024’’,40’’ .0004’’Repeatability: .000020’’Resolution :.000010’’.00005’’/.00001’’/.0001’’/.001’’/.01’’Temperature compensation

1-DOrder No Range Application range List Our Price4429000 350mm /14” 520mm/20.47’’ $7,880 $7,090.00 4429001 600mm /24” 770mm/30.31’’ $8,690 $7,820.004429002 1000mm /40” 1170mm/46.6’’ $14,590 $13,130.002-DOrder No Range Application range List Our Price4429010 350mm /14” 520mm/20.47’’ $8,490 $7,640.004429011 600mm /24” 770mm/30.31’’ $9,290 $8,360.004429012 1000mm /40” 1170mm/46.6’’ $15,210 $13,689.00Transportation, Installation, Calibration and Training is extra

Buy this gage and we’ll give you

$500* worth of precision hand tools

of your choice*at list price

Save$1000

Buy this gage and we’ll give you$500*

worth of precision hand toolsof your choice

*at list price

23


Fowler/Bowers 3 point Micrometers

Order No. Range List Price Our price52-255-310 1/4-5/16” $642.00 $520.0052-255-311 5/16-3/8’’ $595.00 $495.0052-255-312 3/8-1/2” $595.00 $495.0052-255-313 1/2-5/8” $595.00 $495.0052-255-314 5/8”-3/4” $610.00 $510.0052-255-315 3/4-1” $670.00 $550.0052-255-316 1-13/8” $955.00 $790.0052-255-317 13/8-2” $978.00 $810.0052-255-318 2-25/8” $1166.00 $970.0052-255-319 25/8”-31/4” $1177.00 $995.0052-255-320 31/4-4” $1468.00 $1220.0052-255-321 4-5” $1468.00 $1220.0052-255-322 5”-6” $1723.00 $1450.0052-255-323 6”-7” $2203.00 $1850.0052-255-324 7”-8” $2450.00 $2020.0052-255-325 8”-9” $3235.00 $2700.0052-255-326 9”-10” $3300.00 $2800.0052-255-327 10”-11” $3573.00 $3000.0052-255-328 11”-12” $3573.00 $3000.00

Individual Micrometers with Ring Gages

Fowler/Bowers Mechanical 3 point Micrometers Sets

Order No. Range Micrometers Ring Gages52-255-565 1/4-3/8” 52-255-310/311 3.12’’ 52-255-665 3/8-3/4” 52-255-312/313/314 .5’’ & .75’’ 52-255-775 3/4-2” 52-255-315/316/317 .75’’ & 1.375’’ 52-255-885 2-4” 52-255-318/319/320 2.625’’ & 3.25’’ 52-255-890 4-6” 52-255-321/322 5.000’’ 52-255-900 6-8” 52-255-323/324 7.000’’

Order No. List Price Our Price52-255-565 $1085.00 $895.0052-255-665 $1625.00 $1350.00 52-255-775 $2554.00 $2150.0052-255-885 $3462.00 $2900.0052-255-890 $2360.00 $2000.0052-255-900 $3699.00 $3145.00

Sets Includes

• XT Analogue Bowers Micrometersmanufactured in UK.

• Graduation .00025”Save15%

Save15%

Metric 3 point micrometers at same discounted price as above, please call our office 800-313-8136

Mitutoyo 3 point Micrometers

Order No. Range List Price Our Price368-864 .500’’-.65’’ $488.00 $365.00368-865 .65’’-.8” $488.00 $365.00368-866 .8’’-1” $521.00 $390.00368-867 1’’-1.2” $521.00 $390.00368-868 1.2’’-1.6” $663.00 $495.00368-869 1.6’’-2” $694.00 $520.00368-870 2”-2.5” $695.00 $520.00368-871 2.5’’-3” $758.00 $565.00368-872 3’’-3.5” $793.00 $590.00368-873 3.5”-4” $797.00 $590.00368-874 4”-5” $1040.00 $780.00368-875 5”-6” $1080.00 $800.00368-876 6”-7” $1210.00 $900.00368-877 7”-8” $1330.00 $995.00368-878 8”-9” $1350.00 $999.00368-879 9”-10” $1430.00 $1070.00368-880 10”-11” $1510.00 $1130.00368-881 11”-12” $1690.00 $1260.00

• Mitutoyo Micrometers graduations .0002’’.• These prices are for micrometers only.

Ring gages are sold seperately

Mitutoyo Mechanical 3 point Micrometers Sets

Order No. Range Micrometers Ring Gages Grad368-921-10 .275-0.500” 3 Micrometers 2 Rings .0001’’368-995 .500-0.800” 2 Micrometers 1 Rings .0002’’368-996 .800-2.00” 4 Micrometers 2 Rings .0002’’368-997 2-4” 4 Micrometers 2 Rings .0002’’368-998 4-8” 4 Micrometers 2 Rings .0002’Order No. List Price Our Price368-921-10 $1980.00 $1485.00368-995 $1210.00 $899.00368-996 $2780.00 $2085.00368-997 $3920.00 $2940.00368-998 $2780.00 $2085.00’

Save25%

Save25%

Metric 3 point micrometers at same discounted price as above, call 800-313-8136

24


Mitutoyo Digital 3 Point Micrometers Sets

Order No. Range Micrometers Ring Gages 468-976 .275-0.500” 3 Heads & Handle 2 Rings 468-977 .500-0.800” 2 Heads & Handle 1 Rings 368-978 .800-2.00” 4 Heads & Handle 2 Rings 368-979 2-4” 4 Heads & Handle 2 Rings 368-980 4-8” 4 Heads & Handle 2 Rings

Order No. List Price Our Price468-976 $1810.00 $1493.00468-977 $1470.00 $1213.00368-978 $3680.00 $3035.00368-979 $4210.00 $3473.00368-980 $4940.00 $4075.00

• Resolution.00005’’/.001mm

• Measuring faces areTitanium except468-976 which iscarbide

Mitutoyo Digital 3 Point Micrometers

Order No. Range List Price Our Price468-261 .275’’-.35’’ $986.00 $810.00468-262 .35’’-.425” $986.00 $810.00468-263 .425’’-.5” $996.00 $820.00468-264 .5’’-.65” $1100.00 $900.00468-265 .65’’-.8” $1100.00 $900.00468-266 .8’’-1” $1120.00 $924.00468-267 1”-1.2” $1120.00 $924.00468-268 1.2’’-1.6” $1140.00 $940.00468-269 1.6’’-2” $1150.00 $940.00468-270 2”-2.5” $1250.00 $1030.00468-271 2.5”-3” $1250.00 $1030.00468-272 3”-3.5” $1270.00 $1048.00468-273 3.5”-4” $1280.00 $1055.00468-274 4”-5” $1680.00 $1336.00468-275 5”-6” $1730.00 $1428.00468-276 6”-7” $1830.00 $1509.00468-277 7”-8” $1910.00 $1575.00468-278 8”-9” $2040.00 $1980.00468-279 9”-10” $2080.00 $1715.00

• Resolution .00005’’/.001mm• Measuring faces are Titanium except

468-261, 468-262, 468-263 which arecarbide

• These prices are for micrometers only.Ring gages are sold seperately

Save17.5%

Save17.5%

Order No. List Price Our Price568-976 $2000.00 $1650.00568-977-10 $2260.00 $1865.00368-978-10 $2750.00 $2269.00368-980-10 $3620.00 $2987.00

*measuring faces are carbide** Interchangeable anvil type

Mitutoyo Digital 3 Point Micrometers Sets

• Resolution.00005’’/.001mm

• Measuring facesare Titanium except568-976 which iscarbide

Order No. Range Micrometers Ring Gages 568-976* .275’’-0.500” 3 Heads & Handle 2 Rings 568-977-10 .500’’-0.800” 2 Heads & Handle 1 Rings 368-978-10 .800’’-2.00” 4 Heads & Handle 2 Rings 368-980-10** 2’’-4” 4 Heads & Handle 2 Rings

Mitutoyo Digital 3 Point Micrometers

Order No. Range List Price Our Price568-431 .275’’-.35’’ $1290.00 $1060.00568-432 .35’’-.425” $1290.00 $1060.00568-433 .425’’-.5” $1290.00 $1060.00568-434-10 .5’’-.65” $1320.00 $1089.00568-435-10 .65’’-.8” $1270.00 $1048.00568-436-10 .8’’-1” $1320.00 $1089.00568-437-10 1”-1.2” $1370.00 $1130.00568-438-10 1.2’’-1.6” $1510.00 $1245.00568-439-10 1.6’’-2” $1510.00 $1245.00568-440-10 2”-2.5” $1480.00 $1220.00568-441-10 2.5”-3” $1530.00 $1260.00568-442-10 3”-3.5” $1560.00 $1287.00568-443-10 3.5”-4” $1560.00 $1287.00568-444-10 4”-4.5” $1640.00 $1353.00568-445-10 4.5”-5” $1730.00 $1427.00

• Resolution .00005’’/.001mm• Measuring faces are Titanium

except 568-431, 568-432, 568-433 which are carbide

• These prices are formicrometers only. Ring gagesare sold seperately

Save17.5%

Save17.5%

25


Fowler/Bowers Pistol Grip3 point Micrometers Save

15%

Fowler/Bowers Pistol Grip 3 point Micrometers Sets

Order No. Range Sets Consists of: 54-566-009* .080-.250’’/2-6mm 5 Heads, 1 Handle, 3 Ring 54-566-010 1/4-3/8”/6-10mm 2 Heads, 1 Handle, 1 Ring 54-566-620 1/4-3/4”/6-20mm 5 Heads, 1 Handle, 3 Ring 54-566-020 3/8-3/4”/10-20mm 3 Heads, 1 Handle, 2 Ring 54-566-050 3/4-2”/20-50mm 3 Heads, 1 Handle, 2 Ring 54-566-210 3/4-4”/ 20-100mm 6 Heads, 1 Handle, 4 Ring 54-566-100 2-4’’/50-100mm 3 Heads, 1 Handle, 2 Ring 54-566-105 4-6” /100-150mm 2 Heads, 1 Handle, 2 Ring Order No. List Price Our Price54-566-009* $5022.00 $4268.0054-566-010 $2403.00 $2043.0054-566-620 $3418.00 $2905.0054-566-020 $2835.00 $2410.0054-566-050 $3715.00 $3188.0054-566-210 $6124.00 $5205.0054-566-100 $4115.00 $3498.0054-566-105 $3715.00 $3158.00 * these are 2 point micrometers

Save15%

• IP65 Electronics. RS-232C output.Resolution 0.001mm/0.00005”.Tungsten carbide measuring faces onall 3-point heads from 12.5mm.

• Extensions available for deep holemeasurement

Order No. Rang Depth List Price Our Price54-366-008 .250-.312’’/6-8mm 2.2’’ $1679.00 $1425.0054-366-010 .312-.375’’/8-10mm 2.2’’ $1679.00 $1425.0054-366-012 .375-.5’’/10-12.5mm 2.2’’ $1696.00 $1440.0054-366-014 .5-.625’’12.5-16mm 2.44’’ $1717.00 $1499.0054-366-016 .625-.75’’/16-20mm 2.44’’ $1717.00 $1499.0054-366-018 .75-1’’/20-25mm 2.62’’ $2057.00 $1748.0054-366-020 1-1.375’’/25-35mm 2.62’’ $2381.00 $2024.0054-366-022 1.375-2’’35-50mm 3.15’’ $2587.00 $2199.0054-366-024 2-2.625’’/50-65mm 3.15’’ $2738.00 $2327.0054-366-026 2.625-3.25’’/65-80mm 3.15’’ $2738.00 $2327.0054-366-028 3.25-4’’/80-100mm 4’’ $2897.00 $2462.0054-366-030 4-5’’/100-125mm 4’ $3019.00 $2566.0054-366-032 5-6’’/125-150mm 4’ $3116.00 $2648.0054-366-034 6-7’’/150-175mm 4’’ $3397.00 $2887.0054-366-036 7-8’’/175-200mm 4’ $3629.00 $3085.00

• IP65 Electronics. RS-232C output. • Resolution 0.001mm/0.00005”. • Tungsten carbide measuring faces on all 3-point

heads from .5’’ / 12.5mm. • Extensions available for deep hole

measurement• Setting rings included with individual instruments.

Fowler/Bowers Pistol Grip 3point Micrometers Sets

Order No. Range Sets Consists of: 54-364-000* .080-.250’’/2-6mm 5 Heads, 1 Handle, 3 Ring 54-364-010 1/4-3/8”/6-10mm 2 Heads, 1 Handle, 1 Ring 54-364-020 3/8-3/4”/10-20mm 3 Heads, 1 Handle, 2 Ring 54-364-050 3/4-2”/20-50mm 3 Heads, 1 Handle, 2 Ring 54-364-100 2-4’’/50-100mm 3 Heads, 1 Handle, 2 Ring 54-364-105 4-6” /100-150mm 2 Heads, 1 Handle, 2 Ring

Order No. List Price Our Price54-364-000* $5616.00 $4770.0054-364-010 $2322.00 $1974.0054-364-020 $2803.00 $2382.0054-364-050 $3866.00 $3286.0054-364-100 $4304.00 $3658.0054-364-105 $3601.00 $3060.00 * these are 2 point micrometers

Save15%

Order No. Range Depth List Price Our Price54-566-706 .250-.312’’/6-8mm 2.2’’ $1971.00 $1675.0054-566-708 .312-.375’’/8-10mm 2.2’’ $1939.00 $1648.0054-566-710 .375-.5’’/10-12.5mm 2.2’’ $2041.00 $1735.0054-566-712 .5-.625’’12.5-16mm 2.44’’ $2068.00 $1757.0054-566-716 .625-.75’’/16-20mm 2.44’’ $2192.00 $1863.0054-566-720 .75-1’’/20-25mm 2.62’’ $2349.00 $1996.0054-566-725 1-1.375’’/25-35mm 2.62’’ $2776.00 $2217.0054-566-735 1.375-2’’35-50mm 3.15’’ $2608.00 $2216.0054-566-740 2-2.625’’/50-65mm 3.15’’ $2673.00 $2272.0054-566-745 2.625-3.25’’/65-80mm 3.15’’ $2673.00 $2272.0054-566-750 3.25-4’’/80-100mm 4’’ $2846.00 $2419.0054-566-800 4-5’’/100-125mm 4’’ $2981.00 $2533.0054-566-825 5-6’’/125-150mm 4’’ $3164.00 $2689.0054-566-850 6-7’’/150-175mm 4’’ $3359.00 $2855.0054-566-875 7-8’’/175-200mm 4’’ $3494.00 $2970.00

Save15%

Fowler/Bowers 3 point Micrometers


26

Buy this gageand we’ll give you$300* worth ofprecision

hand tools ofyour choice

*at list price

Code Description List price Our Price178-561 SJ-210P $2200.00 $1900.00

Mitutoyo Surftest SJ-401 & SJ-402• No. 178-945-3E 178-947-3E • ype mm/imperial mm/imperial • Measuring Range Z-Axis (32000µ” [16000µ”]) (32000µ” [16000µ”]) • Measuring Range X-Axis 50mm (2”) 25mm (1”) • Drive Unit Straightness 0.5µm/50mm 0.3µm/25mm • Stylus Tip Radius 5µm (200µ”) 5µm (200µ”) • Roughness Parameters Ra, Ry, Rz, Rt, Rp, Rq, Rv, Sm, S, Pc, R3Z. mr, Rpk, Rvk, Rk, Mr1, Mr2, Lo,Ppi, R, AR, Rx, A1, A2, HSC, mrd, Sk, Ku, W, AW, Wt, Wte Ra, Ry, Rz, Rt, Rp, Rq, Rv, Sm, S, Pc, R3Z.mr, Rpk, Rvk, Rk, Mr1, Mr2, Lo, Ppi, R, AR, Rx, A1, A2, HSC, mrd, Sk, Ku, W, AW, Wt, Wte

Code Description Range X axis List price Our Price178-947 SJ-401 25mm/1’’ $7150.00 $6400.00178-945 SJ-402 50mm/2’’ $8810.00 $8060.00

• 2.4 inch color display. • Simple key layout .• Advanced data storage

capabilities. • Optional memory card.• Password protection. • Multilingual support.• Stylus alarm.

• Evaluation Parameters Ra,Rc, Ry, Rz, Rq, Rt, Rmax,Rp, Rv, R3z, Rsk, Rku, RPc,Rsm, Rz1max, S, HSC,RzJIS, Rppi, RΔa, RΔq, Rlr,Rmr, Rmr(c), R c, Rk, Rpk,Rvk, Mr1, Mr2, A1, A2, Vo,Rpm, tp, Htp, R, Rx, AR,Analysis Graphs Bearing areacurve

• Sampling Length 0.003, 0.01,0.03, .1 “ (0.08 , 0.25 , 0.8 ,2.5mm)

Mitutoyo Surftest SJ-210P

Surface Finish Gage

Code List price Our PricePocket Surf® PS1 $2500.00 $2375.00

• Error-free operation thanks to an integrated roughness standard. • Automatic cutoff selection (patented) so that even non-specialists are

ensured correct measuring results. • 24 parameters offer the same range of functions as a laboratory

instrument.• Measuring range: 350 µm/180 µm/90 µm (changes automatically) • Pick-up: Inductive skidded pick-up, 2 μm (80 μin) stylus tip, measuring force approx. 0.7 mN • Traversing length Lt* 1.75 mm, 5.6 mm, 17.5 mm; automatic (0.069 in, 0.22 in, 0.69 in) • Traversing length (acc. to MOTIF): 1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm (0.040 in, 0.080 in, 0.160

in, 0.320 in, 0.480 in, 0.640” • Cutoff lc*: 0.25 mm, 0.8 mm, 2.5 mm; automatic (0.010 in, 0.030 in, 0.100 in) • Number of cutoffs selectable 1 to 5• Parameters 24 (with tolerance limits): Ra, Rq, Rz equiv. to Ry (JIS), Rz (JIS), Rmax, Rp, Rp (ASME),

Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr equiv. to tp (JIS, ASME), RSm, R,Ar, Rx

Mitutoyo Surftest SJ-301P

Code Description List price Our Price178-954 SJ-301 $4110.00 $3710.00

• Large LCD touchscreen with graphic display of measuredprofiles

• Easy to operate touch panel• Wide 350µm measurement range calibration for simple gain

adjustment Roughness Parameters Ra, Ry, Rz, Rt, Rp, Rq, Rv,Sm, S, Pc, R3z, mr, Rpk, Rvk, Rk, Mr1, Mr2, Lo, Ppi, R, AR,Rx, A1, A2 Analysis Graph BAC1, BAC2, ADC. RoughnessStandard JIS, DIN, ISO, ANSI Sampling Length (L) 0.25mm,0.8mm, 2.5mm, 8mm (0.003”, 0.01”, 0.03”, 0.1”, 0.3”) Numberof Sample x1, x3, x5, X*L, Digital Filter 2CR-75%, 2CR-75”(Phase corrected), Gaussian 50%

• Cut Off Length (0.01”, 0.03”, 0.1”, 0.3 (0.1”, 0.32”,1”) • Resolution/Range (13780µin/16.4 &’181in) (4000µin/4.1µin)

(2000µin/2.0µin) (400µin/0.5µin)

Save$400

Save$300

Save$750

27


Mitutoyo Laser Micrometers

• Mitutoyo’s LSM-500S Series Laser Micrometershave the highest scanning speed in the world. Aspeed of 3,200 scans/sec makes in linemeasurements more accurate and repeatable.It’s memory function allow 100 programs andincludes a built in program to measure oddfluted drills and endmills.

*544-072 LSM-6000 display unit is requiredwith each Laser Micrometer

Order No. Model Measuring Measuring Repeatability Linearity Scanning List Our Range Inch Range mm Rate/sec Price Price544-532* LSM-500S .0002” - .08” 0.005~2mm ±0.03μm ±0.3μm 3,200 scans $6,330.00 $5,695.00544-534* LSM-501S .002” - .4” 0.05~10mm ±0.04μm ±0.5μm 3,200 scans $5,400.00 $4,860.00544-536* LSM-503S .012” - 1.18” 0.3~30mm ±0.11μm ±1.0μm 3,200 scans $6,100.00 $5,490.00544-072 LSM-6000 Display Unit $2,500.00 $2,250.00544-116-1A LSM-9506 .02” - 2.36” 0.5~60mm ±0.6μm ±2.5μm 1600 scans $7,980.00 $7180.00Shipping, Installation, Calibration and Training is extra

Buy this micrometer andwe’ll give you

$500* worth of precision

hand tools of your choice*at list price

544-116-1A LSM-9506

Portable Hardness Tester

Order No. List Price Our PricePHT-3000 $1,995.00 $1,595.00Shipping, Installation, Calibration and Training is extra

• PPHT-3000 uses wireless IR tocommunicate with printer, operates withtouch screen and test data could belinked into PC.

• HL display range 170�960HLD• Repeatability 6HLD

• The loading navigator indicatesthe current loading conditionfor setting the preliminary testload

• The measured hardness is displayed on theLED display. Preliminary Test Force(10kgf)Test Force (60kgf),(100kgf),(150kgf)

• Table Up/Down Drive Manual Load ControlAutomatically Load Duration Automatic 3-5.5seconds or manual

• Display 4 digit LED • Resolution/ graduation 0.1 for each scale • Output RS 232C and SPC

Order No. Description List Price Our Price810-218A ARK600 Rockwell tester $9,900 $8,900.00Shipping, Installation, Calibration and Training is extra

Save$1000

Save$400

Mitutoyo Rockwell Hardness Tester

BR200 is a flexible borescopewith a 17mm (2/3") camera andadjustable LED lights. It comescomplete with a wirelessremovable display that recordsboth video and images to aremovable SD memory card.

Wireless Inspection Camera The height and scribing instrumentDigimar M 814 G is ideal formeasuring heights, center distancesbetween bores, surfaces and width of ledges, itcan also be used for both marking and scribingof parts. With table plate made of fine grainedblack granite (greenstone) of great hardnessand form stability. Table surface 300 mm x 200mm (11.81 in x 7.87 in). Resolution (0.0005“ /0.00005“) 4426541 error 0.0008“. 4426543error 0.0012“

Order No. Range List Price Our Price4426541 320mm / 12.6“ $4520.00 $4120.00 4426543 620mm / 24.4“ $5640.00 $5240.00Shipping, Installation, Calibration and Training is extra

Save$400

Order No. Description Our PriceBR200 Wireless Inspection camera $295.00

Digital Height Gage 814G

28


Mantis Elite

Mantis Elite is a patented 'eyepieceless' stereo microscope, offering truly superb 3-D imaging and unparalleled levels of comfort, reducing operator fatigueand increasing quality and productivity. With magnificationoptions up to x20, Mantis Elite is the high performancestereo viewer of choice for a wide range of precision tasksrequiring magnification.

Order No. Description List Price Our PriceL/S/9 Lynx Boomstand system $7930.00 $7130.00

14 point ring light

Lynx is a unique eyepieceless stereo microscope for intricatetasks requiring high-resolution stereo viewing. The eyepiecelessoptics of Lynx significantly increase head freedom and eye relief,reducing operator stress and fatigue over long periods of time.x3.5 - x120 stereo zoom magnification range (x7 - x40 standard). Modular design allows for easy addition ofaccessories, including image capture options.

Camera & Monitor are optional extras

Save$800

Save10%

Comprises of a Mantis Elite optical head, with factory integratedand sealed high resolution USB2.0 camera which permitssimultaneous optical and digital viewing. Image projectioncapability, ideal for training purposesUSB2.0 connectivity with easy-to-use PC-based software. Imagecapture software allows for storage, reference & electroniccommunication. Variety of image capture formats including: BMP,JPEG and PNG. Customer supplies own computer

Lynx Stereo Inspection Microscope

Mantis Elite Cam

Order No. Description List Price Our PriceMEHCAM-001 EliteCam head $2195.00 $1979.00MES-005 Universal stand $720.00 $645.00 MES-006 Bench stand $875.00 $785.00ME0-002 2X lens $190.00 $170.00MEO-004 4X lens $170.00 $150.00MEO-006 6X lens $370.00 $330.00MEO-008 8X lens $510.00 $459.00MEO-010 10X lens $525.00 $470.00MEO-015 15X lens $595.00 $535.00MEO-020 20X lens $615.00 $550.00 MS-001 Floating Stage $370.00 $330.00

Save10%

Order No. Description List Price Our PriceMEH-001 Mantis Elite Head $1675.00 $1499.00MES-005 Universal stand $720.00 $645.00MES-006 Bench stand $875.00 $785.00ME0-002 2X lens $190.00 $170.00MEO-004 4X lens $170.00 $150.00MEO-006 6X lens $370.00 $330.00MEO-008 8X lens $510.00 $459.00MEO-010 10X lens $525.00 $470.00MEO-015 15X lens $595.00 $535.00MEO-020 20X lens $615.00 $550.00

12’’ Profile Projector

Order No. Description List Price Our Price302-713 4”x 4” Stage travel $9,640.00 $8,640.00302-711 8”x 4” Stage travel $11,900.00 $10,900.00Shipping, Installation, Calibration and Training is extra

A 315mm diameter screen Projector with built-inreadouts Resolution .001mm/.00005’’Supplied with surface and contour illumination and10X lens

Save$1000

29


Mitutoyo 14’’ Profile Projector

Order No. Description List Price Our Price172-810A PH-A14 Main Unit $5195.00 $4,900.0064AAA129B Stand for PH-A14 $670.00 $635.00174-173A KA Counter $537.00 $0.00Shipping, Installation, Calibration and Training is extra

• Mitutoyo 14’’ Screen diameter• 8’’ x 4’’ stage with linear scales .00005’’/.001mm.• Vernier Protractor screen• fibre optic surface illumination. linear scales• 10 x Lens

Free174-173A

Two axis KACounter worth

$537.00

Mitutoyo 14’’ Profile Projector

• Heavy-Duty, bench-top model withhorizontal optical system.

• Erect image on day-bright screen.• 14" (356mm) dia. protractor screen

with crosshair line for easy alignment.• Floating-type workstage incorporates

linear scales for fast, accuratemeasurement.

• Suitable for thread pitchmeasurements — free from blurred ordistorted images when the workpieceis angled.

• Price includes 10X lens • Stage travel 10” x 6”• 174-173A or 264-141 Readouts must

be ordered.

Order No. Description List Price Our Price172-848-1A PH-3515F Main Unit $9200.00 $9000.0064AAB004 Fibre optic Illumination $522.00 $490.00264-141 QM-Data 200 $1627.78 $1465.00Shipping, Installation, Calibration and Training is extra

The “2600” Series 30” floormodel horizontal beam modelis manufactured in USA • High precision 9” x 12”measuring stage travel with.00005”/.001mm resolutionprecision glass scales.• Motorized X and Y axis withjoystick control.• Optional 6-position powerlens changer.• Chrome plated workstage 8’’x 35’’ for long life andcorrosion resistance.• Tungsten/halogen profileillumination (24V/200W) forbright, sharp images at allmagnifications.• Duplex surface illumination.

• Digital screen protractor with readings to 1’ or .01° with rotatingsteel ring.• Available CNC option.• Fitted with Quadra Chek QC121 (shown with QC5000 whichcan be supplied as optional extra) and 10X lens

S-T 30’’ Profile Projector

CCP 14’’ Optical Comparator

Order No. Stage Readout Lens Our PriceCC-14 8’’ x 5’’ QC-100 10x $12,795.00TTL TTL Trulight Surface light $795.00Shipping, Installation, Calibration and Training is extra

• The CC-14 optical comparatoris a quality, full-featuredmachine with a broad range ofstandard features.

• High technology, all-LEDillumination fills its 14” viewablescreen at all the availablemagnifications. UseImageCapture to save screenimages and movies todocument your inspections.

• CC-14 14” viewable screen• 8” x 5“ XY travel with 6.5° helix motion• Quick release X axis and fine adjustment knobs in X and Y• Rigid, all-steel construction• 0.00004” XY scales• Fully telecentric with upright, corrected image• 3 position internal lens turret• 3.9” constant working clearance• 3 vivid TruLight™ all LED illuminators available• Quadra-Chek QC-100 DRO standard

Code Description List Price Our Price 22-2600-01 2600 with QC 221 DRO $34,500 $33,750.0022-2501-00 10X lens $3800 $3,500.00Shipping, Installation, Calibration and Training is extra

Free machine stand worth $1,100.00

30


Order No. Description List Price Our PriceK/S/1 Kestrel Microscope $9375.00 $8375.00 6” x 4” Stage QC 200 Readout Resolution .001mm/.00005”

Shipping, Installation, Calibration and Training is extra

Kestrel 200 combines high resolution, high contrast opticalimages with an intuitive microprocessor to deliver accuracy andsimplicity for a wide range of measuring applications. Thesuperior optical image of Kestrel even allows difficult-to-viewfeatures to be measured on low contrast components, such asblack or transparent plastics

Kestrel Measuring Microscope

Save$1000

The eyepiece section of the optical tube incorporates a vernierprotractor. Angle measurement is performed easily by turning theprotractor to align the cross-hair reticle with the workpiece image.Both the transmitted and reflected illumination intensity can be adjusted to obtain the optimal illumination intensity for theworkpiece.• Two XY stages with travel ranges, 2" x 2’’ & 4” x 2”

Order No. Description List Price Our Price176-808A 2”x 2” Stage travel $4900.00 $4400.00176-809A 4”x 2” Stage travel $6530.00 $6030.00Shipping, Installation, Calibration and Training is extra

Mitutoyo Toolmaker’s Microscope

Falcon provides fast and accurate 3-axis measurement of bothroutine and complex precision component parts.

High repeatable accuracy, value-for-money 3-axis videomeasuring system. ‘Best-in-class’ performance, with advancedcapabilities, as standard. Powerful, intuitive and affordable,delivering accurate results, with confidence.High resolution indexed zoom optics offer precision and flexibilityLarge field of view for easy sample orientationProgressive motorised Z-axis controlFalcon includes both surface and substage iris aperture control,motorised Z-axis movement, controllable quadrant LEDillumination and both high and low magnification lens options asstandard.

Order No. Description List Price Our PriceF/S/2 Falcon 3 axis ND1300 $19,985 $17,985.00

Stage Travel 6’’ x 6’’ With QC323 Display LED Power supply Low Magnification objective, 10x - 50x High Magnification objective, 20x - 100xShipping, Installation, Calibration and Training is extra

Save$500

Save$2000

Hawk 300 is a high repeatable accuracy, 3-axis (X, Y, Z) measurements mid-level system from Vision Engineering's Hawkfamily of non-contact measuring systems, designed to achievethe highest levels of accuracy and repeatability. Data processing is performed by a powerful QC-300 multi-function microprocessor with high resolution touch-screen colorvideo display, designed with ease of operation in mind.

Video Edge Detection (VED) for enhanced throughputmeasurements Ideal for high contrast components, batchroutines, measurement of form features, or features both insideand outside the field of view

Hawk 300 Non ContactMeasuring System

Falcon 300 Precision Video Measuring System

Order No. Description List Price Our PriceH/S/660MV/L Hawk 3 axis $33,105.00 $30,000.00

Stage Travel 6’’ x 6’’ Manual .00005’’ With QC323 Display VED CCTV Camera 8 point Ring LED light with power supply Low Magnification objective, 10x - 50x High Magnification objective, 20x - 100xShipping, Installation, Calibration and Training is extra

Save$3000

31


Ram Optical Starlite• Cast aluminum base and column with precision stages • High-resolution digital color camera and zoom optics • Accurate XY measurements to better than 0.0002’’ • Advanced image processing capability with automatic edge trace and multiple field of view tools.

RAM eGx™ metrology software for manual systems Interactive Measurement at your fingertips.• StarLite GX is designed for ease of use, with ergonomic controls, and innovative full-featured

software. Increase your productivity with optional front panel controls - motorized zoom, XYZzero set, enter point button, skew alignment, and an inch/millimeter switch.

• eGx™ metrology software guides users through measurement routines with graphical icons, andunique tools for fast results on a manual measurement system.

• LED illumination includes vector light, ring light • Travel XYZ 6” x 3”x 5’’ Resolution .001mm/.00004” Magnification 34x to 176x

Order No. Description Our PriceStarlite GX 3 Axis vision System with computer and monitor $11,750.00


Ram Optical CNC Vision System• Sprint CNC™ fits on a workbench and provides x,y,z travel of 8” x 6” x 6”. Use the handy

joystick to move the part and optics. Precise autofocus speeds throughput and improvesrepeatability. Run programs for all your parts to keep your quality in control.

• Sprint CNC Features:• 0.5-micron XYZ axis scales • LED back light • VectorLight™ ring light • Optional LED on-axis illumination • Powered by eBx™ Measurement Software and the AutoCheck™ controller• XY Travel 8” x 6” / 200 x 150mm• XY Accuracy E2 = (100 + 4L) µinch • Z Accuracy E1 = (160 + 4L) µinch • Magnification on 20” Monitor 34X to 176X • Supplied with computer & Monitor

Order No. Description Our PriceSPTCNC200 3 Axis CNC Vision System $31,750.00 SCNC200TP 3 Axis CNC vision System with Renishaw TP 20 $37,500.00 Touch probe and standard force module


Tesa Visio

Measurement range is 12’’ x 8’’in (X-Y) x 6’’ range in the Z-axis. ManualMachine Versions have a coordinate stage fitted with a quick release system inboth the X and Y axes. Disengageable wheel drives are used for quick motionin the Z-axis as well as fine setting for focusing the system TESA-VISTAsoftware provides easy-to-use software designed for basic shop floorapplications.

Code List price Our PriceTesa Visio $20,500.00 $18,500.00While supplies last


32


The Hardy Hawkeye borescope is big, rugged, and bright. The thick-walled stainless steel tube has an outside diameter of a quarter inch,and is packed with four times the illumination fibers of the Hawkeye Slim Borescope, allowing three times as much light. It's great forlooking into the large, dark cylinders of aircraft, marine, truck, and off-road engines. It lights up the spaces behind walls to inspect fortermites. Couple the Hardy Borescope with our high intensity, portable Nova light and they pump out 30 times more light than theHawkeye Slim with the standard Mini Maglite® Flashlight! All Hawkeye Hardy borescopes have a 0° direction-of-view and 45° field-of-view. A rotating 90° direction-of-view is achieved by sliding a Hardy Mirror Tube onto the scope.A Hardy Kit contains a 0° direction-of-view scope with a 90° Mirror Tube and a Mini Maglite® Flashlight all in a lockable hard carryingcase. The Nova Kit shown adds the 10X brighter

Order No. Description Tube Length List Price Our PriceHH07-AF-KIT Hardy Kit 7" (180 mm) $945.00 $850.00HH12-AF-KIT Hardy Kit 12" (305 mm) $995.00 $895.00HH17-AF-KIT Hardy Kit 17" (435 mm) $1045.00 $940.00HH07-AF-NVK Hardy SuperNova Kit 7" (180 mm) $1145.00 $995.00HH12-AF-NVK Hardy SuperNova Kit 12" (305 mm) $1195.00 $1050.00HH17-AF-NVK Hardy SuperNova Kit 17" (435 mm) $1245.00 $1120.00

Hawkeye® Precision Borescopes, Classic Slim Kits, FOV 42°, Diameter: 0.165" Burrs mean rejected parts. The Hawkeye Slim Borescope enables machinists to see internal burrs and fix them. They can check placement of internal features during setup, and see how machinesand materials are performing. Better quality means increased sales. Shooters and gunsmiths use the 17 and 22 inch Hawkeye SlimBorescope Kit to ensure that bores are clean and not eroded, so theycan shoot straight.All Hawkeye Slim borescopes have a 0° direction-of-view and 42° field-of-view. A rotating 90° direction-of-view is achieved by sliding a SlimMirror Tube onto the scope.

Order No. Description Tube Length List Price Our PriceHS02-AF-KIT Slim Kit 2" (180 mm) $875.00 $785.00HS07-AF-KIT Slim Kit 7" (180 mm) $895.00 $805.00HS12-AF-KIT Slim Kit 12" (305 mm) $945.00 $850.00HS17-AF-KIT Slim Kit 17" (435 mm) $995.00 $895.00HS22-AF-KIT Slim Kit 22" (559mm) $1495.00 $1345.00HS07-AF-NVK Slim SuperNova Kit 7" (180 mm) $1095.00 $985.00HS12-AF-NVK Slim SuperNova Kit 12" (305 mm) $1145.00 $1030.00HS17-AF-NVK Slim SuperNova Kit 17" (435 mm) $1195.00 $1075.00HS22-AF-NVK Slim SuperNova Kit 22" (559mm) $1695.00 $1525.00

This promotion continues until 7/31/11 or while present supplies last.Shipping and insurance is extra.

Hawkeye® Precision Borescopes Classic Hardy Kits, FOV 45°, Diameter : 0.250"

Save10%

Save10%

2011 special offer

Documents