2012 equipment catalog 6-20-12 np

www.apexinst.com

919-557-7300 or 800-882-3214Fax: 919-557-7110

Website: www.apexinst.comContact: [email protected]

Apex Instruments, Inc.204 Technology Park Lane

Fuquay-Varina, N.C. 27526, U.S.A.

MERCURY

ACCESSORIES

ISOKINETIC

EquipmEnt Catalog

GAS ANALYSIS

FLOW PRESSURE

INTRODUCTION

800-882-3214 /919-557-7300 www.apexinst.com

FLOW, PRESSURE & TEMPERATURE 2D/3D Accu-Flow Measurement Systems Type “S” Pitots, Standard Pitots, Flanges, Manometers, Anemometers, Barometers, Thermocouple Assembly Port Adapters, Packing Glands

MERCURY AND gAS SAMPLINg SYSTEMS & EQUIPMENT Sorbet Trap and Method 30B XC-6000EPC Hg Meter Consoles Dual Sorbent Trap Probes Heated Sample Lines Stirling Gas Conditioner Method 30B Manual Console, XC-260 XC-30B Automatic Console Gas Sampling, Meter Consoles Miniature Probes, Liners, Vost Kit, Tedlar Bags, Glassware

ISOKINETIC SAMPLINg EQUIPMENT Isokinetic Meter Consoles Pumps, Method 5 Probes, Liners Nozzles, Umbilicals, Sample Lines Glassware & Accessories Method Equipment Illustrations

gAS ANALYSIS EQUIPMENT Orsat Analyzers Combustion Gas Analyzers Fryite Analyzers; Flow Control Moisture Analyzers Heated Filter Assemblies IRM Probes, Sintered Filter Assembly Heated Sample Lines Temperature Controllers Gas Conditioners/Condensers Data Acquisition System Transportable CEM Systems

APPENDIX Conversion Factors Equations Nomenclature

INDEX Alphabetical Product Listing

SOURCE TESTINg ACCESSORIES PFA Impingers, Filters Assemblies, Fittings, Tubing Dry Gas Meters, Quick Connects Electrical Components Pumps, Cases, Monorail Systems Fittings, Specialty Supplies Reference Manuals Replacement Parts

SAMPLE RECOVERY/ANALYTICAL Filter Media, In-Stack Thimbles Balances, Brushes, Bottles Drying Agents and Accessories

CALIBRATION EQUIPMENT & SERVICES Calibration Orifice Sets Dry Gas Reference Meters Wet Test Meters, Meter Calibrations Pitot Calibration Calibrations Documentation

Typical Industries & Sources Tested using Apex Equipment:• Acid Plants • Asphalt Plants• Boilers • Cement Plants• Chemical Manufacturing • Furnaces• Incinerators

Apex Instruments was established in 1988 as an American-owned company with worldwide impact. For more than 22 years, Apex Instruments has manufactured equipment for sampling emissions from industrial chimneys and smoke stacks using US-EPA guidelines.

Apex Instruments is committed to offering quality equipment at economical and competitive prices.

Apex Instruments equipment is designed by a staff of experienced stack testers who understand your compliance testing needs. Apex Instruments provides test-ing consoles, probes, pitots, umbilicals, glassware, filters and much more. Cus-tomized equipment for isokinetic, gas and particulate sampling is also available through our excellent sales team. We can design and fabricate any item you need. We are innovators in engineering equipment that is versatile and easy to use.

Our friendly and professional staff is always ready to provide technical support to our customers. Please feel free to contact them at any time for answers to your questions or to place an order.

Development and improvements of Apex Instruments equipment is influenced by valuable feedback and suggestions from customers. We encourage customer in-put and ideas. Our goal is to form tight-knit and long lasting relationships with our customers by providing the best support and equipment for your needs.

The Apex Instruments highly qualified staff is knowledgeable and friendly and always available to assist customers with special projects and equipment.

Contact Apex Instruments today to see how we can be of service to you for your stack testing equipment needs with quality, innovation, and competitive prices.

Catalog Contents Overview

• Incinerators • Municipal Waste Combustors• Petroleum Refineries • Power Plants• Pulp and Paper Mills • Smelters• Steel Mills

www.apexinst.com

919-557-7300 or 800-882-3214Fax: 919-557-7110




IsokInetIc catalog

XC-522

XC-5000

XC-40

71

ISOKINETIC SOURCE SAMPLING EQUIPMENT

www.apexinst.com 800-882-3214 / 919-557-7300

Delivery:Most orders are shipped within 24 hours of receipt. Please allow extra time for custom orders. Shipping times vary according to the requested shipping service. If you have questions about your shipment please email our shipping management at [email protected].

Return Merchandise AuthorizationCustomers wishing to return items for service or credit need to contact our sales associates for an RMA. Contact by email at [email protected] or by phone (919) 557-7300 or toll free (800) 882-3214.

PricingPrices are published for U.S. customers only. International customers should contact their local distributor. Prices are in U.S. Dollars, FOB shipping point, or Ex Works for International orders. Please confirm current prices by phone, fax or email. Please refer to our price list for a complete list of part numbers and kit configurations.

PaymentFor your convenience, MasterCard, VISA and American Express arewelcome. Company purchase orders are accepted upon credit approval.

We back up this commitment with extensive knowledge of our products, good communication and an excellent customer service history. Our equipment isdesigned by experienced stack testers who know what you face when performing compliance testing.

We encourage you to suggest ideas to improve our equipment. We work closely with you, over the long term, to provide the best equipment for your needs.

CUSTOMER SATISFACTION is guaranteed at APEX INSTRUMENTS.

Hours of Operation:Monday through Friday from 8:00 am

until 5:00 p.m. (EST).

Apex Instruments, Inc. 204 Technology Park Lane

Fuquay-Varina, NC 27526 USA

In U.S. Call Toll Free:1-800-882-3214

Local: 1-919-557-7300fax: 1-919-557-7110

e-mail: [email protected]

www.apexinst.com


FLOW, PRESSURE & TEMPERATURE

MERCURY ANd GAS SAMPLING SYSTEMS & EQUIPMENT

GAS ANALYSIS EQUIPMENT

APPENdIX

INdEX

ACCESSORIES

Meter Consoles............................................5 - 11

Sample Pumps ............................................12, 13

Nozzles & Nozzle Accessories .......................14, 15

Probes, Liners, Sheaths & Accessories..........16 - 18

Modular Sample Case AssembliesFilter Ovens, Impinger Cases, Risers .............19 - 21

Glassware, Adapters & Impingers ..................22 - 31

Umbilical Cords, Sample LinesMethod 4, Method 5 ....................................32 - 39

Method 8, Method 17 Method 23 .....................................................40 - 43

Method 26A, Method 29, Ontario-Hydro ..............................................44 - 46

Method 201A, Cascade Impactor Kit, Method 202 ..................................................47 - 51

Filter Media, Sample Recovery Desiccator and Desiccants ........................52 - 56

Silica Gel, Balances Calibration Weights .....................................57 - 59

Calibration Equipment, Monorails .............60 - 63

XC-522/XC-572 Components List ............64

Appendix .......................................................65-69

Isokinetic Index ............................................70

isokinetiC sampling equipment

Stationary source sampling is conducted to evaluate gas stream emissions to the atmosphere from stacks, ducts or process exhausts. A pol-lutant’s concentration is measured by extracting a known volume from the gas stream and determining the average stack gas flow rate over the sampling period. The mass emission rate of each constituent then may be calculated. In the area of Stack Sampling Methods, there are 3 major categories of test-ing: Isokinetic Reference Methods, Instrumental Reference Methods (IRM), and Gaseous Sampling (which includes sampling for mercury). Obtaining a representative sample of particulate matter from a gas stream requires a more complex procedure than sampling only for gases. Particles can be either liquid droplets or solids. Representative sampling requires that the velocity of the gas/particle mixture passing into the sampling nozzle must be as close as possible to the velocity of the gas stream in the stack or duct. When the velocities are the same, the sampling is isokinetic. During the entire sampling period, the stack velocity must be monitored constantly and the pumping rate adjusted so that the nozzle intake veloc-ity matches as closely as possible the velocity of the in-stack gas/particle mixture. In addition, the pumping rate needs to be adjusted for differences in pressure, temperature and moisture between the stack conditions and the pump or meter console. The exact steps to conduct this type of sampling are spelled out in U.S. EPA Reference Method 5. This method also requires knowledge of U.S. EPA References Methods 1 through 4. The Apex AutoKineticTM method 5 sampling system offers modular components that can be arranged and re-arranged to perform multiple U.S. EPA Reference Methods. Select from manual, digital or automated meter consoles, as well as a wide range of heated filter and impinger boxes, heavy-wall glassware with unground o-ring ball joints, probes built to customer specified lengths, new designs for umbilical cords, and custom modifications to meet your unique needs. All delivered in a timely manner at a competitive price. For over 22 years, Apex Instruments, Inc., has concentrated on manufacturing equipment designed for use in sampling stationary combustion sources. Apex Instruments has always been directly involved with the envi-ronmental industry, working close with the U.S. EPA. When the Clean Air Act was enacted in 1990 and hazardous air pollutants were identified for control, Apex Instruments was at the forefront of product design, method evaluation and implementation.

Phone: 919-557-7300 or In the U.S. 800-882-3214Monday-Friday, 8:00 a.m. to 5:00 p.m. (Eastern Time)

Fax: Order at your convenience 24 hours a day, 7 days a week 919-557-7110

Website: www.apexinst.com

Please visit our website for additional product information, new product releases, updated materials, manuals, reference data and valuable links.

Please feel free to call our friendly sales staff today!

Vance JonesDomestic Sales,

Customer [email protected]

Janet NicholsSales Manager

[email protected]

John StauberInternational [email protected]

doug Bernhardt Customer Service

[email protected]

ISOKINETIC SAMPLING EQUIPMENT

3


www.apexinst.com 800-882-3214 / 919-557-7300

Apex Isokinetic Source Sampling Systems are rugged versatile equipment designed for extracting a representa-tive flue gas sample from a source to determine dust and fumes emissions in accordance with many U.S. EPA Reference Methods as published in CFR 40 Part 60 Appendix A. The Apex Isokinetic Source Sampling System allows the operator to monitor gas velocities, temperatures, pressures and adjust sample flow rates to obtain a representative flue gas sample.

The results are often used to prove compliance with existing and applicable regulations. It can also be used to characterize the gas stream, tune or optimize the process or combustion source, or validate control processes in place.

isokinetiC sourCe sampling /method 5 and assoCiated methods

Modular Sample Cases, page 19

Probes and Liners, page 16 - 18

Consoles, page 4 - 11

Pumps, page 12 - 13

Umbilicals, page 29

Nozzles, page 14

Glassware, page 22

Featuring the XC-5000 AutoKineticTM Sampler

Versatile System designs for Multiple Methods:

The Apex Method 5 Source Sampling System can be configured with various accessories and used to sample a wide range of pollutants, such as metals, halides and halogens, polychlorinated biphenyls (PCBs), dioxins/furans, polycyclic aromatic hydrocarbons (PAH’s), particle size distributions and an ever-increasing group of pollutants by adaptations of basic test methods. Within our catalog we feature sampling kits and accessories for the most popular isokinetic methods and pollutants of interest. A list of featured methods can be found on page 4.

Method 1 Determination of Sampling Location and Traverse PointsMethod 2 Determination of Stack Gas Velocity and Volumetric Flow RateMethod 3 Determination of Excess Air and Dry Molecular WeightMethod 4 Determination of Moisture In Stack GasesMethod 5 Determination of Particulate Emissions from Stationary Sources

Isokinetic Testing Requires a Thorough Understanding of the First Five Test Methods Presented in the CFR 40 Part 60, Appendix A.

Method 5 - CompactMethod 5 - FlexibleMethod 5 - Rigid

Method 17Method 23Method 26A

Method 29Method 201AMethod 202

4


800-882-3214 / 919-557-7300 www.apexinst.com

See Links for Methods on Our Website

See Links for Gas Testing Methods

See Links for Flow Testing Methods

METhOd dESCRIPTIONMETHOD 4 Determination of MoistureMETHOD 5 Determination of Particulate

Emissions from Stationary SourcesMETHOD OTM-28 Controlled CondensateMETHOD 17 Particulate by In-stack FiltrationMETHOD 23 Dioxins and Furans

METHOD 0061 Hexavalent Chromium

Recommended Accessories to Convert M5 Kit to Perform:METHOD 26A Hydrogen Halides and HalogensMETHOD 29 Multiple MetalsMETHOD 201A PM10 EmissionsMETHOD 202 Condensable Particulate Matter,

PM 2.5ONTARIO HyDRO ASTM-D6784-02 Mercury

hOW TO GET STARTEd Versatile system designs are available to serve complex and challenging stack testing locations. The Method 5 System, combined with the appropriate accessories, can be used to sample a wide range of pollutants, such as dust, metals, polychlorinated bi-phenyls (PCBs), dioxins/furans, polycyclic aromatic hydrocarbons (PAH’s), particle size distributions and an ever-increasing group of pollutants by adaptations of basic test methods. Contact our helpful sales staff to configure a system to meet your needs.

SELECT METER CONSOLESelect a meter console that is appropriate for the test method and select a configuration that suits your specific conditions.

ChOOSE A PUMPChoose an external pump that suits your specific conditions and desired flow rates.

dETERMINE SAMPLING KITS REQUIREMENTSSelect method specific accessories and kits to complete your system.

NEEd ASSISTANCE?We are never more that a phone call away during normal business hours, and would be glad to help answer any questions you may have. hours of Operation: Monday through Friday from 8:00 am, until 5:00 p.m. (EST).

Fax : (919) 557-7110Email : [email protected] # : (919) 557-7300 (800) 882-3214

Rigid-Set-up

FEATUREd METhOdS Apex Instruments method kits are available for the most popular methods. After choosing the meter console and sample pump, purchase the kit you need to conduct the desired method.

Flexible System

Console & Pump

5


www.apexinst.com 800-882-3214 / 919-557-7300

The Apex Instruments XC-5000 AutoKineticTM Sampler is designed for conducting US EPA Method 5 and associated isokinetic methods. Take the worry out of isokinetic calculations and the human error out of data entries recorded by hand. The new XC-5000 is compatible with your existing Method 5 stack sampling components. Report preparation is streamlined with accurate data downloadable to files for easy preparation and submission to your regulating agency.

XC-5000 AUTOKINETICTM SAMPLER CONSOLE

Features • Uses standard Apex Instruments sample train components (probe, nozzle, heated filter box, impinger box, etc.)

• Maintains isokinetic sampling conditions without operator assistance

• Calculates stack traverse points

• Calculates correct nozzle diameter for site conditions

• Stores and displays user entered data and parameters

• Upload and download data files

• Performs instantaneous isokinetic sample flow calculations

• Timer alerts operator to move the probe

• Alarms indicate when acceptable conditions are not met

• English or metric units selectable

Model description

XC-5000 AutoKineticTM Sampler Console, 110V

XC-5000-V AutoKineticTM SamplerTM Console, 240V

Sample Pump: Accepts standardmethod 5 pump assemblies.

XC-5000 Isokinetic Source Sampler

XC-5000AutoKineticTM SamplerConsole with Laptop

Wireless or Ethernet Connection Available

Main Power

ProbePower

Color CodedThermocouple

Jacks

Stainless SteelVacuum Pump

Quick Connects

Pump PowerConnection Stainless Steel

Pitot QuickConnects

Ethernet Interface

Umbilical Cable Power Connection

Stainless Steel Sample Quick Connect

LED Display

LEDIndicator

Delta H Calibration

External

Connections

6


800-882-3214 / 919-557-7300 www.apexinst.com

Specifications

Optional:4 channel analog input module for logging external data (4-20ma, 0-10V, 1-5V).

dimensions:23” x 21” x 12” (58 cm x 53 cm x 30.5 cm).

Weight: 39 lbs. (17.7 kg).

Power: 120V / 60 Hz. 220V / 50 Hz (optional).

Console Power Requirements:120V 15amp max.

Umbilical Connections:Electrical: 4 conductor circular connector grounded shell.Sample line: Stainless Steel 1/2” Quick Connector.Pitot Line: Stainless Steel 1/4” Quick Connectors (optional 3/8”).External pump: Stainless Steel 3/8” Quick Connect.Thermocouples: Type-K standard size.

Communication:Wireless and Ethernet.

Gas Meter: Model AP25, Precision DGM, 0.7 liters per revolution, digital gas volume with Internal Quadrature Encoder with 6 digit LCD display, 1cc resolution.

Temperature Control: Integrated temperature control via the Control and Data Acquisition Board, probe and oven with solid state relays.

Thermocouple display: 7 temperatures displayed simultaneously on the PC User Interface, °F or °C, Probe, Stack, Oven, Filter, Exit, AUX and DGM.

Digital Pressure Transducers for H, and P (Bi-Directional), Barometric.

P +/- 2.5” 0.01” resolution +/- 63mm 0.01 mm resolution

H 0”-5” 0.01” resolutions 0mm-127mm 0.01mm resolution

Barometric 17.7 inHg – 32.5 inHg 0.01 inHg resolution 450 mmHg – 825 mmHg 0.01m mmHg resolution

XC-5000 software screen shot.

Features

• Uses Standard Apex Instruments Sample Train Components (Probe, Nozzle, Heated Filter Box, Impinger Box)• Calculates Stack traverse Points (Method 1)• Stores and Displays User Entered Data and Parameters• Performs Instantaneous Isokinetic Sample Flow Calculations & Controls Isokinetic Flow• Timer Alerts Operator to Move the Probe• English or Metric Units

XC-5000 AutoKineticTM Sampler

Console and Laptop

Wireless or Ethernet Connection Available

7


www.apexinst.com 800-882-3214 / 919-557-7300

ISOKINETIC SOURCE SAMPLING CONSOLE - MANUALThe XC-500 Series Sampling Console is a rugged, lightweight metering console used to extract gas samples in accordance with US EPA Method 5 for determining source emissions for dust and fumes. The Apex Isokinetic Source Sampler allows the operator to monitor gas velocities, temperatures, pressures and adjust sample flow rates to maintain isokinetic sampling conditions. Comes with digital temperature controllers, a choice between digital or liquid manometers, digital temperature displays and external pump connections. Stainless steel fittings and quick connects are standard. Units in the XC-500 Series are available in Standard or Metric units, 110V or 220VAC, optional internal orsat pump. XC-500 Series Sampling Console features a molded, rugged X-case with side handles for attaching the easy carry strap. The X-case allows for rear door access. Apex Instrument’s Isokinetic Sampling Consoles are manufactured to conform to the construction design criteria and specifications cited in U.S. EPA Method 5, Code of Federal Regulations (40 CFR Part 60) and APTD-0581 documents. All Apex consoles are calibrated prior to shipping.

Slide Out Front PanelThe meter console has a slide-out panel for easy access.

Rear ViewRemovable back panel allows for quick audits.

PortableX-case with sample pump on portable hand cart. (optional)

Temperature Display Manometer Quick

Connects

Dual Column Manometer

Coarse Control Valve

Dry Gas Meter

Fine Control Valve

Heavy Duty Panel Latches

Manometer Zero Adjust Knobs

Manometer Level Adjust

StandardStainless Steel Pitot

Quick Connects

StandardStainless Steel

Sample Quick Connect

Standard Stainless Steel Pump Connection

(Pressure)Umbilical

Cable Power Connection

Color Coded Thermocouple Jacks

Temperature Selector Switch

Vacuum Gauge

Elapsed Timer

Rocker Switches with Magnetic

Circuit Breakers

Optional Orsat Pump and

Rotameter

Rugged Custom Molded X-Case

Digital Filter and Probe Temperature

Controllers

Stainless SteelNon-Reversible Pump

Quick Connect(Vaccum)

Strap

8


800-882-3214 / 919-557-7300 www.apexinst.com

XE-0523 Sample Pump Mounted in UhMWPolyethylene Case• Motor: 1/4 hp, 120/240V 60/50Hz 4.6/2.3 Amp., RPM 1725/1425• Measured Flow: 3.1 cfm@ 1 inch Hg; 1.5 cfm@ 15 inches Hg • Maximum Vacuum: 25.5 inches Hg • Weight: 35 lbs. (16kg)

XC-522 Source Sampling ConsoleThe Apex Instruments Model XC-522 is a full featured manual meter console. The Apex Isokinetic Source Sampling Console allows the operator to monitor gas velocities, temperatures, pressures and adjust sample flow rates to maintain isokinetic sampling conditions. Designed with convenient display layout for manual data recording.The Apex Instruments Isokinetic Source Sampling Consoles are manufactured to conform to the construction design criteria and specifications cited in U.S. EPA Method 5, Code of Federal Regulations (40 CFR Part 60) and APTD-0581 documents.

Features:• Low Cost - Manual Console• Easy to Operate and Maintain• Rugged, Lightweight, Stackable Case• Removable 19” Front Panel• Carry Strap for Easy Transport• Non-Reversible Sample Pump Connections• Color Coded Thermocouple Jacks• Bright, Easy-to-Read Temperature Displays• Easy-Leveling Dual Column Manometers• Dry Gas Meter with direct read index• Stainless Steel Quick Connects & Fittings

Model description

XC-522 English Meter Console, 120 V/60 Hz

XC-522-V English Meter Console, 240 V/50 Hz

XC-522-O English Meter Console with optional Orsat Pump Assembly, 120 V/60 Hz

XC-522-OV English Meter Console with optional Orsat Pump Assembly, 240 V/50 H

XC-522 English Units (Cubic Feet, oF)

XC-522 Source Sampler

XC-522 Recommended Accessories

Nomographs & Calculators, See Accessories Section

Page 29d

Specifications

Temperature Controllers for Probe and Oven: 1/32 DIN bright red LED display, indicating temperature controllers with separate 25 amp solid state relay, auto-tuning. Standard Type-K jack for input.

Vacuum Gauge: Dual Scale Vacuum Gauge, 0-30” Hg / 0-100kPa.

Sample Pump Connections: 3/8” Quick Connects, Stainless Steel, non-reversible.

Umbilical Connections: Sample Inlet: ½” Stainless Steel Quick-Connect; Pitot Lines: 1/4” (3/8” optional) stainless steel Quick Connect; Electrical: 4 conductor circular connector; Thermocouples: 6 Type K inputs, standard size.

Power: 120V/60Hz standard; 240V/50Hz optional

dimensions: 23” x 21” x 12” (58 x 53 x 30cm) Panel 19”

Weight: 43 lbs (19.5kg)

Gas Meter: Rockwell S110 remanufactured with direct read index, 0.1 cubic feet/revolution, res. 0.001 cubic feet direct read analog totalizer with 999.999 cubic feet capacity.

Manometer: Dual Inclined/Vertical Manometer for determining stack velocity and sample flow rate. Inclined Range 0-1.0” H²0 with 0.01 divisions. Vertical Range 1-10” H²O with 0.1” divi-sions. Fabricated from solid acrylic, precision bored, accurate to +/- 1%. Convenient self-sealing chrome plated brass quick-connects with Viton® O-Rings. Supplied with plastic plugs for positive secondary seal. Temperature display: Panel mount digital thermometer, bright red LED display, 1/8 DIN plastic housing, Range -157° to 1999°F, with separate 7-channel selector switch.

Sample Pumps are sold separately, Page 12-13

9


www.apexinst.com 800-882-3214 / 919-557-7300


Model description

XC-572 XC-572 Isokinetic Meter Console, Metric, 120V/60Hz

XC-572-V XC-572 Isokinetic Meter Console, Metric, 240 V/50 Hz

XC-572-O XC-572 Isokinetic Meter Console, Metric, with optional Orsat Pump Assembly, 120V/60Hz

XC-572-OV XC-572 Isokinetic Meter Console, Metric, with optional Orsat Pump Assembly, 240 V/50 Hz

XC-572 Metric Units

XC-572 Source Sampling ConsoleThe XC-572 Source Sampling Console is the metric version of the XC-522. It is a full featured, compact, and lightweight Isoki-netic Source Sampler. It has all the great features you want and the reliability you need. Field set up is easy with non-reversible external pump connections and the industry standard 4-pin electrical connector. (External sample pump sold separately).Console allows operators to monitor gas velocities, tempera-tures, pressures, and sample flow rates for maintaining isokinetic sampling conditions.

Specifications

Gas Meter: AP-25 easy to read numeric index with leak check wheel, low pressure drop, rated 42 lpm at 15mm H2O, maximum capacity approx. 70 lpm. Totalizer capacity 9999.9999 cubic meter, resolution 0.1 Liter.

Manometer: Dual Inclined/Vertical Manometer for determin-ing stack velocity and sample flow rate. Inclined Range of 0-26mm H²0 with .2mm. Vertical Range of 26-250mm H²O with .2mm. Fabricated from solid acrylic, precision bored, accurate to +/- 1%. Convenient self-sealing chrome plated brass quick-connects with Viton® O-Rings. Supplied with plastic plugs for positive secondary seal.

Temperature display: Panel mount digital thermometer, bright red LED display, 1/8 DIN plastic housing. Range -105°C to 1372°C, with separate 7-channel selector switch.

Temperature Controllers for Probe and Oven: 1/32 DIN bright red LED display, indicating temperature controllers with separate 25 amp solid state relay, auto-tuning. Standard Type-K jack for input.

Vacuum Gauge: Dual Scale Vacuum Gauge, 0-30” Hg / 0-100kPa.

Sample Pump Connections: 3/8” Quick Connects, Stainless Steel, non-reversible.

Umbilical Connections: Sample Inlet: ½” Stainless Steel Quick-connect; Pitot Lines: 1/4” (3/8” optional) Stainless Steel Quick Con-nect; Electrical: 4 conductor circular connector; Thermocouples: 6 Type K inputs, standard size.

Power: 120V/60Hz standard; 240V/50Hz optional.dimension: 23” x 21” x 12” (58 x 53 x 30cm) Panel 19”.Weight: 40 lbs (18kg)

Features:• Precision gas meter with leak check indicator• Low Cost - Manual Console• Easy Operation and Maintenance• Rugged, Lightweight, Stackable Case• Removable 19” Front Panel• Carry Strap for Easy Transport• Non-Reversible Sample Pump Connections• Color Coded Thermocouple Jacks• Bright, Easy-to-Read Temperature Displays• Easy-Leveling Dual Column Manometer• Stainless Steel Quick Connects & Fittings• Convenient Layout for Manual Data Recording

Low Flow Adapters,VUA,

See Accessories Section

Page 18d

XC-572 Recommended AccessoriesXE-dAA Sample Pump Mounted in UhMWPolyethylene Case• Motor: 1/2 hp, 120V/60Hz 5 1/2 Amp• 2.9 cfm@ 1 inch Hg; 1.4 cfm@ 15 inches Hg • 26.5 inches Hg • Weight: 30 lbs. (14kg)

Sample Pumps are sold separately, -13

10


800-882-3214 / 919-557-7300 www.apexinst.com

XC-563 dIGITAL SOURCE SAMPLING CONSOLEApex Instruments Model 563 Source Sampling Console is thedigital equivalent to the XC-522 and XC-572; featuring an AP25Dry Gas Meter with optical encoder and digital totalizer. Theconsole also features differential pressure transducers for Pand H. The temperature controllers, thermometer and timerall have digital displays.


Model description

XC-563 XC-563 Meter Console, 120V/60Hz

XC-563-V XC-563 Meter Console, 240V/50Hz

XC-563-O XC-563 Meter Console, with optional Orsat Pump Assembly, 120V/60Hz

XC-563-OV XC-563 Meter Console, with optional Orsat Pump Assembly, 240V/50Hz

XC-563 Source Sampler Console

Features • Precision Gas Meter with LCD Totalizer• Module with Dual Pressure Transducers• Digital Probe Temperature Control/Display• Vacuum Gauge (Dual Scale)• Stainless Steel Quick Connects and Control Valves• Digital Temperature Display (oF or oC) with up to 6 Type-K Inputs• Non-Reversible External Pump Connections• Removable Front Lid and Back Panel• Digital Display for P Velocity Pressure, and H Orifice Pressure• No Messy Manometer Fluid• Digital Elapsed Timer• Lightweight

Specifications

Umbilical Connections:Electrical: 4 conductor circular connector grounded shell.

Sample Line: Stainless Steel 1/2” Quick Connectors.

Pitot Line: Stainless Steel 1/4” Quick Connectors (optional 3/8”).

External Pump: Stainless Steel 3/8” Quick Connect.

Thermocouples: Type-K Standard Size.

Power: 120V / 60Hz Standard

240V / 50Hz Optional

dimensions: 23” x 21” x 12” (58cm x 53cm x 30.5cm)

Weight: 39 lbs. (17.7 kg).

Sample Pump: Accepts Standard Method 5 Pump Assemblies.

Gas Meter: AP25, 0.7 liters per revolution, digital gas volume total-izer with Quadrature Encoder, 8 digit LCD display, 1cc resolution.

Temperature Control: Digital temperature controllers for probe and oven 1/32 DIN with solid-state relays.

Temperature display: Type-K 3.5 Digit LED display (°C is standard for export). °C/°F selectable via plastic jumper behind front bezel, -105°C to 1372°C range. (-157°F to 1999°F). Separate 7-channel TC selector switch. Standard and Metric Units.

digital Pressure Transducers for h P +/-2.5” range 0.01” resolution

+/-63mm range 0.1mm resolution H 0” - 5” range 0.01” resolution 0” - 127mm range 0.1mm resolution

(Bi-Directional)

Audit Kit for Digital Metering Console. ak-563audit kit

dhM-M100 - Handheld Meriam Manometer

INCLUdES:

Sh-32 - 8 x 10 Molded Plastic Case

SCL-F4 - Plastic Quick-Turn (Luer Lock)

SYR-30ML-LL dhM-M100

Sh-32

SCL-F4SYR-30ML-LL - Syringe, Luer Lock Tip, 30ml with 1 ml Increments

11


www.apexinst.com 800-882-3214 / 919-557-7300

Features• Rugged lightweight case with Molded-In Handle

• Precision Dry Gas Meter with Digital Display

• Minihelic Pressure Gauge

• Internal Diaphragm Pump

• Digital Temperature Display with up to 5 Type-K Inputs (°F)

• All Stainless Steel Fittings and Control Valves

• Digital PID Probe Temperature Controller

• Digital Elapsed Timer (hr:min:sec)

• Vacuum Gauge (Dual Scale)

• Easy Access for Service

METhOd 4 SOURCE SAMPLING CONSOLEThe Apex XC-40 Source Sampler Console is a durable, lightweight meter console ideal for Method 4 (Determination of the Moisture Content of Stack Gas). The meter console can be used with standard impingers and accessories to collect moisture for required calculations. This unit heats the stack probe and with its internal pump pulls 0.75 cfm as required to comply with Method 4.


Method 4 Determination of the Moisture Content of Stack Gas Summary: Stack gas is extracted at constant rate (less than 21lpm) for a minimum volume of 600 liters. Moisture is scrubbed from the sample stream and measured volumetrically or gravimetrically.

Specifications

Gas Meter: Model AP25, 0.7/rev., digital gas volume totalizer, with Quadrature Encoder, 8 digit LCD Display, 1cc resolution.

Flow Indicator: Mechanical Orifice w/Minihelic Pressure Gauge, range (0-2”) or (0-50MM H2O).

Temperature display: Type-K 3.5 Digit LED display (°C is stan-dard for export). °C/°F selectable via plastic jumper behind front bezel, -105°C to 1372°C range. (-157°F to 1999°F).

Probe Temperature Control: Compact, 1/32 DIN autotuning indicating temperature controller with separate 25 amp solid state relay. 115 VAC outlet 5-15R, Type-K jack for input.

Internal Sample Pump: Single cylinder oil-less pump, long life diaphrams, 1/8-27 NPT Connections, Max. vacuum 23” hg, Min. full load speed 2800 rpm, nominal free flow 1.15cfm, 12V 3.8 amps

Vacuum Gauge: Dual Scale, 0 to 30” Hg and 0 to 100kPa.

Power: 115V/60Hz; 240V/50Hz (optional).

Sample Inlet: 1/2” Stainless Steel Quick-Connect (alternate sizes available)

dimensions: HxWxD: 21” x 9.5” x 14” (53 cm x 24 cm x 35.5 cm)

Weight: 22 lbs (9.98kg)

Model descriptionXC-40 Standard Metering Console with Digital Gas Meter, plus

Digital 8 digit LCD Totalizer. -.001 cu.ft. res. (120V/60Hz)

XC-40-V Standard Metering Console with Digital Gas Meter, plus Digital 8 digit LCD Totalizer. -.001 cu.ft. res.(240V/50 Hz)

XC-40M Metric Metering Console with Digital Gas Meter and a 8 digit Digital LCD Totalizer. 1cc res. (120V/60Hz)

XC-40M-V Metric Metering Console with Digital Gas Meter and a 8 digit Digital LCD Totalizer. 1cc res. (240V/50 Hz)

Method 4 Source Sampler Console

See more information on our Method 4 Condenser Assemblies and Accessories for use with theXC-40 Source Sampler Console.

Method 4 Condenser Assemblies, Page 33

12


800-882-3214 / 919-557-7300 www.apexinst.com

The open tubular steel frame is designed for the meter console to sit on top of the pump frame. For easy maneuverability, an optional wheeled handle assembly is available. For use with XF version sample pump assembly.

XF-05hW Optional Pump FrameHandle Assembly. Black Tubular Steel with 8” Wheels

XF-05hW

METhOd 5 PUMP ASSEMBLIES

Lubricated Rotary Vane Pump (0523)The Lubricated Rotary Vane Pump includes two 5’ wire-reinforced, kink-free hoses with nonreversible quick connects. The pump is mounted in either the new, improved, stronger tubular steel frame, or the standard x-case with removable covers providing easy access for service. The wick style lubricator requires less maintenance. Option “V” added for 240V.

Specifications• Motor: 1/4hp, 120/240V 60/50Hz 4.6/2.3 Amp., RPM 1725/1425• Measured Flow: 3.1 cfm@ 1 inch Hg; 1.5 cfm@ 15 inches Hg • Maximum Vacuum: 25.5” Hg• Weight: 35 lbs., (16kg)

XE-0523

XE-0523 Pump Shown with Console

Model description

XE-0523 Rotary Vane Pump in a Molded X-Case (120V/ 60 Hz)

XE-0523-V Rotary Vane Pump in a Molded X-Case (240V/ 50Hz)

XE-0523 Rotary Vane Pumps

Model description

XF-0523 Rotary Vane Pump in Tubular Steel Frame (120V / 60 Hz)

XF-0523-V Rotary Vane Pump in Tubular Steel Frame (240V / 50Hz)

XF-0523 Rotary Vane Pumps

Model description

E-0523 External Pump Assembly (std), Vane Pump, Open Aluminum Frame, Lubricator, 5ft Pwr Cord & Hoses,Stainless Quick Connects Standard, 120V

E-0523-V External Pump Assembly (std), Vane Pump, Open Aluminum Frame, Lubricator, 5ft Pwr Cord & Hoses, Brass Quick Connects Standard, 240V

E-0523 Open Aluminum Pump Frame

E-0523

13


www.apexinst.com 800-882-3214 / 919-557-7300

XE-dAA

Model Pump

XE-DAA Double Headed Diaphragm Pump in a Molded X-Case, 110V/60Hz

XE-DAA-V Double Headed Diaphragm Pump in a Molded X-Case, 220V/50Hz

XE-dAA Pumps diaphragm Pumps

XF-dAA Pump Shown with Console and XF-05hW Optional

Pump Frame

XF-05hW Optional Pump FrameHandle Assembly. Black Tubular Steel with 8” Wheels.

XF-05hW

XF-dAA

Model Pump

XF-DAA Double Headed Diaphragm Pump in Tubular Steel Frame, 110V/60Hz

XF-DAA-V Double Headed Diaphragm Pump in Tubular Steel Frame, 220V/50Hz

XF-dAA diaphragm Pumps

double headed diaphragm Pump (dAA)The Double Headed Diaphragm Pump will never require any lubrication. Pump is easy to service within its frame and includes a power cord, two 5’ wire-reinforced, kink-free hoses with non-reversible stainless steel quick connects (this pump is not recommended for use in extremely cold environments).

METhOd 5 PUMP ASSEMBLIES

Specifications• Motor: 1/2hp, 120V/60Hz, 5 1/2 Amp• Measured Flow: 2.9 cfm@ 1 inch Hg; 1.4 cfm@ 15 inches Hg • Maximum Vacuum: 26.5” Hg• Weight: 30 lbs., (14kg)

*See Accessories for Spare parts

Model Pump

E-DAA External Pump Assembly (alt), Double Diaphragm Pump, Open Frame, 5ft Pwr Cord & Hoses, 120V

E-DAA-V External Pump Assembly (alt), Double Diaphragm Pump, Open Frame, 5ft Pwr Cord & Hoses, S.S. Quick Connects Standard, 240Volt

E-dAA Open Aluminum Pump Frame

14


800-882-3214 / 919-557-7300 www.apexinst.com

NOZZLES FOR ISOKINETIC SAMPLING

Unique to Apex Instruments, the Nozzle Shank has integrated Ferrule with O-Ring Groove. O-Ring (O-O14V) shown.

Nozzle Sets come in stainless steel, glass, quartz, inconel or FEP lined. Includes a Nozzle Case, Seven Nozzles, (sizes 4, 6, 8,10, 12,14,16) and select Accessories.

Nozzle Sets

Nozzle w/ Female 14/35 Taper Joint

Size

-�

Standard I.D. Stainless Steel NS-�

Alloy 600

NI-�

FEP Lined

Stainless Steel

NST-�

Silico Coated

Stainless Steel

NSIL-� 4 1/8 0.120 3.048 5 5/32 0.152 3.861 6 3/16 0.180 4.572 7 7/32 0.209 5.309 8 1/4 0.245 6.223 9 9/32 0.277 7.05610 5/16 0.305 7.74711 11/32 0.334 8.48412 3/8 0.370 9.39813 13/32 0.402 10.2114 7/16 0.430 10.9215 15/32 0.459 11.6616 1/2 0.495 12.5717 17/32 0.527 13.3918 9/16 0.568 14.4

Individual Nozzles

Apex Instruments Threaded Nozzle Set (NS-TH-SET) features the larger ID nozzles for low stack gas velocity and a buttonhook Nozzle Blank (NS-THB) with a tapered fitting. The set includes seven SS Nozzle Tips that thread onto the Nozzle Blank. Sizes include 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16” and 1”. ns-th-set

Note: When using O-Ring, a Bored Union, (P/N: N-10UB) is required.

NS-SET

NG-SET

Model DescriptionNS-SET Stainless Steel

Nozzles. Includes Four 5/8” Tube Nuts, O-Viton Rings

NG-SET Glass Nozzles. Includes Three 5/8” Glass Filled PTFE Ferrules

NI-SET Alloy 600 Nozzles, with Inconel Tube Nut

NQ-SET Quartz Nozzles (Order Ferrules Separately)

NST-SET FEP lined, Stainless Steel Nozzles, Includes Four 5/8” Tube Nuts, O-Viton Rings

NSIL-SET Silica Coated Stainless Steel Nozzle Set

Nozzle Sets

Size Nominal I.D. Stainless SteelNS-TH� Inch Decimal mm

20 5/8 0.625 15.87522 11/16 0.6875 17.46224 3/4 0.750 19.05 26 13/16 0.8125 20.63728 7/8 0.875 22.22530 15/16 0.9375 23.81232 1 1.0 25.4B Blank

Oversized NozzlesSize-�

Standard I.D. Glass NG-�

Quartz NQ-�

Glass with Taper Joint NG-�T

Quartz with Taper Joint NQ-�T

4 5/8 0.125 3.175 5 5/32 0.156 3.962 6 3/16 0.180 4.775 7 7/32 0.209 5.308 8 1/4 0.250 6.35 9 9/32 0.281 7.13710 5/16 0.312 7.92411 11/32 0.343 8.71212 3/8 0.375 9.52513 13/32 0.406 10.31214 7/16 0.437 11.09915 15/32 0.468 11.88716 1/2 0.500 12.717 17/32 0.531 13.48718 9/16 0.558 14.173

Inch Decimal mm

Inch Decimal mm

Apex Instruments offers Button-Hook Nozzles in mul-tiple materials. The size needed for isokinetic sampling depends on the stack gas velocity; the material depends on the stack temperature and the sampling method. The most popular nozzles are constructed from seamless 316 stainless steel and can be coated with FEP or SilcoSteel-CR®. Other nozzle materials include Borosilicate Glass, Alloy 600 and Quartz. Standard sampling nozzles are 4” long and have a 5/8” o.d. shank for attaching to the probe union. Stainless steel nozzles are configured with an O-Ring to aid in positive leak checks. A bored out union is needed with Apex O-Ring nozzles, although a standard union can be used if the O-Ring is removed. Other sizes and configurations are available. Nozzles must be measured before initial use. Glass and Quartz Nozzles are available with a female 14/35 ground glass taper joint eliminating the need for the 5/8” union. For use with male taper joint probe liners.

Call For Additional Information


15


www.apexinst.com 800-882-3214 / 919-557-7300

Model Description (Standard 5/8”)N-10 5/8” Stainless Steel Tube Nut

NI-10N 5/8” Alloy 600 Tube Nut

N-10TG 5/8” Glass Filled PTFE Tube Nut

Model Description (Standard 5/8”)N-10BR Thrust Backer Ring, 5/8” for O-Ring

Seal, Stainless Steel. For use with O-113V

O-113V Viton® 5/8” O-Ring to seal liner (for use with N-10BR)

O-113V-DZ Viton® 5/8” O-Ring to seal liner (for use with N-10BR), Dozen

O-014V Viton O-Ring for 1/2” UltraTorr Fitting when Adapting to 1/4” UltraTorr Fitting

O-014V-DZ Viton® O-Ring for 1/2” UltraTorr Fitting when Adapting to 1/4” UltraTorr Fitting, Dozen

Model Description (Standard 5/8”)N-10 5/8 inch Stainless Steel Tube Nut.

N-10TG 5/8 inch Glass Filled Teflon Tube Nut, 12 flats (sided) Fits Unions and Ball Adapters

N-10UB Stainless Steel Union, Bored Out, with Nuts and Ferrules

N-10US Stainless Steel Union, Bored Straight Through, with Nuts and Ferrules

N-10UBT Stainless Steel union, Bored Out, PTFE Coated, with Nuts and Ferrules

N-10UST Stainless Steel, Bored Straight Through, PTFE Coated, with Nuts and Ferrules

NI-10UB Alloy 600, 5/8” Tube Union Bored Out, with Nuts and Ferrules

NI-10US Alloy 600, 5/8” Bored straight through, with Nuts and Ferrules

N-10USIB 5/8” Silcosteel®-treated Stainless Steel Bored Union, Nuts and Ferrules included

NTG-10U Glass Filled 5/8” PTFE Tube Union with Nuts and Ferrules

NTG-10UNN Glass Filled PTFE Tube Union without Nuts and Ferrules, Body Only

Material Max TemperatureStainless Steel 650°C (1200°F)PFA Fittings 177°C (350°F)Borosilicate Glass 480°C (900°F)Inconel 980°C (1800°F)Quartz 900°C (1650°F)Viton® O-Rings 260°C (500°F)Graphite Ferrules 980°C (1800°F)Glass Filled PTFE 315°C (500°F)Hastelloy C276 980°C (1800°F)

Recommended Maximum Temperatures

NOZZLE ACCESSORIES

Model Description

NB-3 3/16” Diameter, Twisted Stainless Steel Wire and Nylon Bristles



NBT-1/2 PTFE Nozzle Brush, 1/2” Diameter, PTFE Barrel and Bristles

Nozzle Brushes

Nozzle Brush Set (NB-SET) One of each type brush from three popular sizes in a convenient carrying tube (sizes 3, 5, & 8).

Model DescriptionVPC-4-16 1/4” Vinyl Push-On Cap, 1/4” OD,

1” Inside Height, Red

VPC-6-16 3/8” Vinyl Push-On Cap, 3/8” OD, 1” Inside Height, Red



Vinyl Nozzle Caps Great for Leak Checks!

Rings

Nozzle Unions

Model Description (Standard 5/8”)10FF-S Stainless Steel, Front Ferrule

10FB-S Stainless Steel, Back Ferrule

10F-GR Graphite High Temp, Single Ferrule

10F-GR-DZ Graphite High, Temp, Ferrule (12 pc) Dozen

NTG-10F Glass Filled PTFE, Single Ferrule

NTG-10F-DZ Glass Filled PTFE, Ferrule (12 pc) Dozen

NI-10FF Alloy 600 Front Ferrule

NT-10BF Alloy 600 Back Ferrule

NT-10F PTFE Single Ferrule 5/8”

NT-10F-DZ PTFE, Single Ferrule, 5/8”, (12 pc) Dozen

Ferrules

NBT-1/2

Tube NutsIndividual Components can be Ordered Separately. Please Call for Pricing.

Integrated Ferrule on Stainless Nozzle for Steel Only

0-113V

N-10 N-10UBNN PL-[_]

PS-[_]N-10BR

(Welded)

IntegratedFerrule

Nozzle Installation for Steel Alloys.

Nozzle Installation for Glass and Quartz. Nozzle Installation for Glass and Quartz.

N-10N-10UBNN

PL-[_] [_]

nB-set

Includes 5/8” Bored Union Body, Nut, Ferrules, Backer Ring and Viton® O-Rings. pk-sp

Small Parts Kit

16


800-882-3214 / 919-557-7300 www.apexinst.com

Standard Method 5 Probe

Method 5 Probe with Optional Oversheath

Optional OversheathPacking GlandPG-32S

STANdARd METhOd 5 hEATEd PROBESThe Apex Instruments Standard Method 5 Heated Probe Sheath feature 1” diameter sheaths constructed from corrosion resistant stainless steel, modular 3/8” pitot tip, 1/4” stainless steel quick connects, Type-K thermocouples for stack & probe temperature, probe heater and an orsat line, small parts package. Standard lengths are 3’ to 16’. Longer lengths and custom orders are available by request. Order probe liners separately. Probes are ordered according to nominal (liner length). Effective length is one foot less than nominal length.

Replace � with Nominal Length (feet)

Stainless Steel Probe Sheath + Heater PS-�H

Optional with 2” OD Probe Oversheath

PS-�HO2�

Replacement Heater PH-�

Watt

3 3504 3505 4006 4007 4008 4509 475

10 50011 55012 60014 60016 700

Probe Sheaths & heaters

Add “V” to end of part number for 240V option at no extra cost.

The unique design of the Apex Modular Pitot Tip reduces the collection of water droplets in the pitot lines. The lower tube is self-draining while the offset in the upper tube acts as water trap.

Replacement Pitot TipsProduct DescriptionMPT-6-133 Type S Modular Pitot Tip for Oversheath Probes, 3/8”

Stainless Steel, 133mmMPT-6-181 Replacement Pitot Tip for Standard Method 5 Probe Assemblies,

3/8” SS, 181mmMPT-6-181-OFF

Replacement Pitot Tip, 3/8”, Stainless Steel, Offset for use with 47mm Filter holder and PM2.5 Cyclone, 181mm

MPT-6-218 Replacement Pitot Tip, 3/8”, Stainless Steel, Extended for use with Method 5 nozzle and SFA-47 In-Stack filter, Length 218mm

MPT-6-283 Replacement Pitot Tip,3/8”, Stainless Steel, extended for use with PM10 Cyclone and 47mm In-Stack Filter, Length 283mm

MPT-6-320 Replacement Pitot Tip, 3/8”, Stainless Steel, Extended for use with standard Method 5 nozzle and SFA-190, SFA-300, or SFA-2590 In-Stack Filters, Length 320mm

MPT-6-421 Replacement Pitot Tip, 3/8”, Stainless Steel, Extended for use with PM10/2.5 Cyclones and SFA-47 In-Stack Filter, Length 421mm

- 1 foot shorter then effective

Features a tightly wound heating element around a rigid tube. The rigid tube design allows liner replacement without removing the heating element. Actual tube length is 2-3/8” less than nominal length. Apex probe heaters are designed to operate at the method 5 specified temperature of 245°F (+/-25 Degree F). Specify alternate temp requirement if needed at the time of order. The maximum recommended temperature is 260°C (500°F). In extreme applications (probe heaters over 11 feet, long u-cord, long power extension cord), power drops may occur. In these instances, a separate temperature controller is suggested. See Gas Analysis Section, Page 9 for Apex ICH-901 Temperature Controller. Alternate wattage requirement to be specified at time of order.

Method 5 Probe (Tube) heaters

PG-32S

2” Oversheath Packing Gland, 2” NPT Threads, Stainless Steel with PTFE Ferrule. Must be Specified at time of order.

pg-32s

Packing Gland (Optional)

length in mm

M

‘S’ type pitots manufactured in accordance with U.S. EPA Reference Method 2 may be assigned a baseline coefficient of 0.84. Geometric and wind-tunnel calibrations are offered:

PT-CAL-G (Geometric Certification)PT-CAL-W (Wind Tunnel Calibration)

-1 foot shorter then effective


17


www.apexinst.com 800-882-3214 / 919-557-7300

Part Number DescriptionGA-28B10TG PTFE Adapter Glass filled, 28mm Ball to 5/8 inch Tube Fitting, Straight Probe

Liner Ball Adapter. Includes PTFE/glass nut, ferrule and Viton® O-RingGA-28B10TGNN PTFE Adapter Glass filled, 28mm Ball to 5/8 inch Tube Fitting, No Nut

PROBE LINERSStandard Probe Liners are constructed from 5/8” diameter tubing and have #28 ball joint attached. Liners are available in borosilicate glass, quartz, stainless steel, Alloy 600 and PFA; liners with integrated nozzles require a ball joint adapter. Glass and quartz liners with male 14/35” taper joint are available for attaching to the nozzle, eliminating the need for the 5/8” union.

Monorails, page 52

Length in Feet

Standard Probe Liner

Tubing

Probe Liner with Male 14/35 Taper Joint and #28 Ball Joint

Probe Liner with Nozzle(shown with optional #28 ball adapter)

GA-28B10TG

PLN- GTor

PL- QT

N - T

PLS- GN Specify Nozzle Size

Quartz or Glass 14/35 TaperSize

TubingSeamless, for use as probe liner (plain ends)

Part Number DescriptionTTG-10/6 Glass Filled PTFE Probe Liner Material, 5/8 inch OD, 3/8 inch IDTPFA-10/6 Tubing PFA, 3/8 ID x 5/8 OD Heavy WallTS10-035S Seamless 316 Stainless Steel Tubing, 5/8” OD x .035 Wall TI10-035S Seamless Alloy 600 Tubing, 5/8” OD x .035 Wall

MaterialReplace �

with Nominal Length (feet)

Glass

PLN-�G

Stainless Steel

PL-�S

QuartzPL-�Q

Alloy 600

PL-�I

C-276 PL-�C

GT

PLN-�GTQT

PL-�QT

34567891011121416

Probe Liners

Call for Pricing on PLS- GN

*See Accessories for Isokinetic Software

Isokinetic Slide RuleThis device performs Isokinetic Stack Sampling Calculations. The slide rule provides new ∆H settings at a glance.

M5A-1 English Units

M5A-1M Metric Units

Programs included: • Traverse Points Location• Stack Gas Velocity and Volumetric Flow Rate• Stack Gas Moisture Content• Stack Gas Saturation Moisture Content• Ideal Nozzle Size and K-Factor with ∆H Loop• Post-Test Isokinetics• DGM Field Calibration using Critical Orifices

m5a-C

ISOKINETIC CALCULATORS & SPREAdShEET

M5A-C

Isokinetic M5A-C CalculatorThe Casio Graphic Scientific Calculator comes pre-programmed with valuable Isokinetic stack sampling calculations making field calculations quick and easy. Programmed in English and metric units.

Special OptionsPTFE

Adapters


18


800-882-3214 / 919-557-7300 www.apexinst.com

AIR COOLEd METhOd 5 PROBE

Alloy Method 5 Probe Sheaths are for hot corrosive gases. Includes a 3/8” pitot tip, 1/4” stainless steel quick connects, stack temperature thermocouple with magnesium oxide insulation, and orsat line. The Alloy probe sheaths come standard with Alloy 600 unions for nozzle and pitot (stainless steel optional). Order liners separately. Alternate alloys available, please call for more information and for pricing.

SPECIAL ALLOY METhOd 5 PROBE ShEAThS

Call for current pricing for the following items:• Alloy Liners (PL-��I) • Alloy Sheaths (IPS-��)

- Recommended for High Temperature Applications - Highly Corrosion Resistant

BlowersSBR Blower Assembly, variable speed 93 cfm, connects to SB-2M, also includes hose (110V/60Hz). Add “V” for 240V option.

sBr-93CFm

sBr-93CFm-V

Glass and Quartz Liners Not Recommended Due to Breakage

Part

NumberNominal

Length (feet)APS-4I 4

APS-6I 6

APS-8I 8

Air Cooled Method 5 Probe Assembly with unheated alloy 600 Liner

Call for pricing on additional lengths.

SB2M

SB3

SBR-93CFM

Air Cooled Probe

Air flow in air cooled probes.

Add “V” to end of part number for 240 V at no extra cost.

Air Cooled Method 5 Probes up to 8’ in length, applicable for high temperature sources. Concentric tubular design allows the cooling air to return and exhaust out of the stack. The probe sheath is constructed from stainless steel tubing while the liner, pitot, thermocouple and nozzle union are made from inconel. A variable speed high capacity blower is needed for cooling. Order blower separately.

19


www.apexinst.com 800-882-3214 / 919-557-7300

MOdULAR SAMPLE CASE ASSEMBLIESApex Instruments Modular Sample Case Assemblies are versatile, lightweight and available in a variety of configura-tions. There are three different filter ovens, and two different risers that can attach to the bottom of the ovens, with four different impinger cases. The impinger cases slide on and off for easy changing of the impinger sets between test runs. Several standard assemblies are available or the individual components can be purchased separately. Please inquire for additional details.

Model description

SB-50 Modular Sample Case Assembly, Includes Miniature Heated Filter Box SB-2M, Riser SBR-10, and Impinger Box SB-3 (holds 4 impingers), 120 V

SB-50-V Modular Sample Case Assembly, Includes Miniature Heated Filter Box SB-2MV, Riser SBR-10, and Impinger Box SB-3 (holds 4 impingers), 240 V

SB-50/4 Modular Sample Case Assembly, Includes Miniature Heated Filter Box SB-2M, Riser SBR-10, and MId-Sized Impinger Box SB-4 (holds 6-8 impingers), 1`0 V

SB-50/4-V Modular Sample Case Assembly, Includes Miniature Heated Filter Box SB-2M-V, Riser SBR-10, and Mid-Sized Impinger Box SB-4 (holds 6-8 impingers), 240 V

SB-50 Modular Sample Case Assembly

SB-2 heated Filter Box

SB-3

SB-1 Classic Modular Sample Case Assembly Model description

SB-1 Modular Sample Case Includes SB-2 Heated Filter Box & SB-3 Impinger Box, 120V

SB-1V Modular Sample Case (Includes SB-2V Heated Filter Box & SB-3 Impinger Box), 240V

SB-1/4Modular Sample Case Includes SB-2 Heated Filter Box, 110 VAC and SB-4 Impinger Box, holds 6-8 impingers

SB-1/4V Modular Sample Case, includes SB-2 V Heated Filter Box, 240V and SB-4 Impinger Box, holds 6-8 impingers

Heated Filter Box Standard Features• Lightweight aluminum construction• Stainless Steel Probe Clamp• Type K Thermocouple Jack• Probe and Auxiliary Power Jacks• 500 Watt Heater (750 Watt Optional)• 1/2 inch E-Glass Insulation• Mounting Hardware for Riser• Double Doors• Handle/Monorail Attachment• Aluminum Liner• Stainless Steel Latches• Internal Reinforcement

Rigid Arrangement

Monorails, page 52

Flexible Arrangement

SBR-10SB-3

SB-2M Miniatureheated Filter Box

20


800-882-3214 / 919-557-7300 www.apexinst.com

FILTER OVENSFilter ovens have lightweight powder-coated aluminum-lined panels with stainless steel clamps, hardware and E-Glass insulation thermal insulation. Internal reinforcements reduce flexing of box when testing with long probes. Front and rear doors provide greater accessibility. The handle is designed for attaching to a monorail for easy traversing. The 1” probe clamp may easily be removed from the oven and replaced with differ-ent alternative probe clamps. A SBR-10 Riser is for mounting the impinger case in the rigid arrangement. The SB-2 is the traditional full-size filter oven that is designed for the rigid arrangements for accommodating a cyclone before the filter. The SB-2M Miniature Filter Box and SB-2 Filter Oven will accept standard 2”, 3”, and 4” filter assemblies.

Classic Full Size heated Filter Box has 2 access doors, probe clamp and accepts cyclone. 120 V/60 Hz standard. Dimensions: 23.5” x 9.5” x 9.5”, (60 x 24 x 24 cm), Weight: 16 lbs (7.3 kg).

Add “V” to end of part numberfor 240V/50Hz at no extra cost.

sB-2

sB-2VSB-2

STRAIN RELIEFS FOR SB-2M

GA-104

GA-107-12

The GA-104 connects a 3/8” sample line to the filter exit of the SB-2M oven. Standard comes with #28 socket, thermo-couple, and 1/2” to 3/8” reducing union.

ga-104

The GA-107 strain relief is used with sample lines at the SB-2M during Flexible Method 5 sampling. Includes bracket that attaches to the SB-2M and standard mount with clamp. 1/2” tube.

ga-107-12

The GA-113 strain relief is used spe-cifically with heated sample lines at the SB-2M during Flexible Method 5 sampling. Includes bracket that attaches to the SB-2M and an adjustable Velcro® strap to grip heated sample lines.

ga-113 GA-113

Model description

PC-1 Probe Clamp for 1 inch OD Probe As-semblies

PC-1VU Vertical Probe Clamp for Up-Traverses, 1 inch Clamp

PC-1VD Probe Clamp for Down-Traverse, 1 inch Clamp

PC-2/32 Probe Clamps for 2” Bevel Packing Gland

SB-2M-ST Straight Through Heated Filter Box has two access doors and probe clamp. The Apex SB-2M-ST is the SB-2M with the probe clamp raised so an in-line filter assembly can be used without the need for the cyclone bypass. In addition #28 Stainless Steel Socket with a 3/8” full flow quick-connect is installed on the outlet. Accepts filter assembly GNFA-3-STR. Dimensions: 13.5” x 9.5” x 9.5”, (34.3 x 24 x 24 cm), Weight: 10 lbs (4.5 kg) 120V/60 Hz standard. Add “V” to end of part number for 240V/50 Hz at no extra cost.

sB-2m-st

sB-2m-st-V

SB-2M Miniature heated Filter Box has two access doors and probe clamp; 120V/60 Hz standard. Dimensions: 13.5” x 9.5” x 9.5”, (34.3 x 24 x 24 cm), Weight: 10 lbs (4.5 kg).

sB-2m

sB-2m-V

Add “V” to end of part number for 240V at no extra cost.

SB-2MShown with GA-104 Strain Relief. Order Separately

SB-2M-STSB-2M-ST-V

GA-108

Stainless Steel #28 Socket Adapter with Full Flow 3/8” quick connect and Mounting Bracket, Used on SB-2M Straight Thru To Attach Sample Line.

ga-108

21


www.apexinst.com 800-882-3214 / 919-557-7300

Model Description

SB-50 Modular Sample Case Model 50, (includes SB-2M, SBR-10, & SB-3 & probe clamp), 120V

SB-50-V Modular Sample Case Assembly, Includes Miniature Heated Filter Box SB-2M-V, Riser SBR-10, PC-1, and Impinger Box SB-3, 220V

SB-50/4 Modular Sample Case Assembly, Includes Miniature Heated Filter Box SB-2M, Riser SBR-10, PC-I, and MId-Sized Impinger Box SB-4 (holds 6-8 impingers), 110V

SB-50/4-V Modular Sample Case Assembly, Includes Miniature Heated Filter Box SB-2M, Riser SBR-10, PC-1, and MId-Sized Impinger Box SB-5, 220V

SB-50/5 Modular Sample Case Assembly, Includes Miniature Heated Filter Box SB-2M, Riser SBR-10, PC-I, and MId-Sized Impinger Box SB-5, 110V

SB-50/5-V Modular Sample Case Assembly, Includes Miniature Heated Filter Box SB-2M, Riser SBR-10, PC-1, and MId-Sized Impinger Box SB-5, 220V

Model Description Holds Impingers Dimensions (HxWxD) Weight

SB-3 Impinger Box/Insulated Coolant Reservoir; Model 100 4 9.5” x 9.5” x 13.5” (24.1 cm x 24.1 cm x 34.3 cm) 5 lbs (2.3 kg)

SB-4 Impinger Box/Insulated Coolant Reservoir; Model 150 6 12.5” x 9.5” x 13.5” (31.8 cm x 24.1 cm x 34.3 cm) 6 lbs (2.7 kg)

SB-4SD Impinger Box/Insulated Coolant Reservoir; Divided; Model 150 4 12.5” x 9.5” x 13.5” (31.8 cm x 24.1 cm x 34.3 cm) 6 lbs (2.7 kg)

SB-5 Impinger Box/Insulated Coolant Reservoir; Model 200 8 16” x 9.5” x 13.5” (40.6 cm x 24.1 cm x 34.3 cm) 7 lbs (3.2 kg)

SB-8

GA-100UA-3J

SB-3

Power Box AdapterThe UA-3J connects to umbilical 4-pin circular connector and converts to three straight blade receptacles. Clamps to 1/2” sample line or GA-100 adapter. The UA-3J is used in conjunction with the Compact Method 5, Method 8, Method 17 and in other sampling situations in which power for the probe is not available due to the absence of a heated filter box.ua-3J

Impinger Inlet Strain ReliefThe GA-109 strain relief is used with sample lines at the impinger box when performing Flexible Method 5 sam-pling. Includes bracket that attaches to the impinger box and standard mount with sample line clamp (specify size). Available from 3/8” tube to 2” or 3”.-S is for Velcro version.

ga-109-12ga-109-s

UA-3J-V Adapter, Power, U-Cord, 3 receptacles, 220V Power Box Adapter, Includes 1/2 inch Mounting Clamp and 4 Pin Amphenol to 3 Receptacles.ua-3J-V

UA-3J

UA-3J-VGA-109-12

Sample Case Risers attach to the base of the filter oven for test methods requiring extra height between the filter outlet and the first impinger. The SBR-10 Riser is required for attaching the impinger case to the SB-2M for rigid arrangements. SBR-18 Riser is primarily used for Method 23 sampling when using a vertical condenser.

RISERS

IMPINGER CASES (COLd BOXES)

MOdULAR SAMPLE CASE FRAMEThe Modular Sample Frame (SB-8) with Probe Clamp is an ideal addition for sampling methods that require no heated filter compartment such as Method 8, Method 306 and in-stack filtration methods. The SB-8 secures the probe and impinger case in a rigid manner. The sample frame is made of durable powder coated aluminum with stainless steel probe clamp and impinger case slides.

sB-8

Apex offers four different removable Sample Box Impinger Cases. These cases are constructed from a thicker aluminum to reduce cracking, durable polyethylene foam insulation, and pre-punched foam insert for holding the impinger bottles in place, and have a fold down handle with a rope centering guide and two high strength brackets for mounting strain relief. The cases slide on and off the heated filter box for easy changing of the impingers between test runs. All cases are equipped with a spring-loaded latch to prevent accidental slippage.

SB-3 SB-4 SB-4Sd SB-5Impingers Cases

Model Description Dimensions (HxWxD) Weight

SBR-10 Riser for SB-2M, impinger box adapter, 10” riser with insulated reservoir 9.5” x 9.5” x 10” (24.1 cm x 24.1 cm x 25.4 cm) 10 lbs (4.5 kg)

SBR-18 Riser for MM5, impinger box adapter, 18” riser with insulated reservoir 9.5” x 9.5” x 18” (24.1 cm x 24.1 cm x 45.7 cm) 10 lbs (4.5 kg)

Umbilical (Gooseneck) AdapterThe GA-100 connects the final impinger outlet to the umbilical cable. Standard with #28 socket, thermocouple and 1/2” stainless steel male quick connect. Mounts on Impinger box.ga-100

GA-100

SBR-10 SBR-18

22


800-882-3214 / 919-557-7300 www.apexinst.com

GN-9A GN-9AO

GN-1GNFA-3

GN-8-18K

GN-2Cyclone Body

(optional)

GN-3Cyclone Flask

(optional)

O-116V #28 Ball Viton® O-Ring

O-126V Impinger Taper Viton®, O-Ring, Top

O-123V Impinger Taper Viton®,

O-Ring, Bottom

GN-11

GN-9A GN-9A

ISOKINETIC GLASSWARE SETSBASIC GLASSWARE SETS Apex Instruments offers a complete line of glassware. Our Standard Glassware features extra heavy borosilicate glass with unground #28 Ball and Socket Joints with O-Ring Seals. Cost effective unground joints are more durable than ground joints and the O-Rings provide a tight, leak-free seal without grease. This set includes all the glassware necessary for one train.

Model DescriptionGN-CGS Basic Method 5 Glassware Set

(3” Filter Assembly)GN-CGS4 Basic Method 5 Glassware Set

(4” Filter Assembly)GN-CGS-Z Basic Method 5 Glassware Set

(3” Filter Assembly) with OZ style ClampsGN-CGS4-Z Basic Method 5 Glassware Set

(4” Filter Assembly) with OZ Style Clamps

Qty Part # Description1 GN-1 Cyclone Bypass, Unground with O-Ring

1 GNFA-� Filter Assembly, Unground Glass, PTFE Frit, Open Style Aluminum Clamp, 3” or 4”

1 GN-8-18K Double “L” Adapter with Type K Thermocouple Assembly, Cap and Silicone Seal

1 GN-9AO Greenburg Smith Impinger with Orifice, Unground

3 GN-9A Modified Greenburg Smith Impinger, Plain, Unground

3 GN-11 U-Tube, Unground Sockets

12 BS28WS #28 Ball Joint Clamp, Generic

Basic Method 5 Glassware Sets

Includes:

Qty Part Description1 GN-8 Double L Adapter, Unground

#28 Sockets1 GN-9AO Greenburg Smith Impinger

with Orifice, Unground3 GN-9A Modified Greenburg Smith

Impinger, Plain, Unground3 GN-11 U-Tube, Unground Sockets


Method 4 Glassware Sets Model DescriptionGN-CG4 Basic Method 4 (Moisture)

Glassware Set

Includes:

Alternative Styles and Filter AssembliesAre also Available.

23


www.apexinst.com 800-882-3214 / 919-557-7300

dELUXE METhOd 5 GLASSWARE SET WITh TRANSPORT CASE

NOTE: Set does not include cyclone or cyclone flask. Spare O-Rings are included.

Case dimensions: 25” (63.5 cm) x 19” (48.2 cm) x 23” (58.4 cm)

Full Weight: 63 lbs. (29 kg.) Empty Weight: 39 lbs. (18 kg.)

dELUXE METhOd 5 GLASSWARE SET The deluxe Method 5 Glassware Set with Transport Case (GN-dGS) contains all the glassware plus spares for a full test series. Four filter assemblies cover three sampling runs plus one as a spare. Two full sets of impingers and U-Tubes permit a second run before recovering the first run results. The deluxe glassware set includes spare impingers, U-tubes and Double “L” adapters. The glassware set fits easily into foam lined custom pockets. The sturdy transport case is lockable for secure chain-of-custody. Optional FEP Encapsulated O-Rings are available upon request.

Model Description

GN-DGS Deluxe Method 5 Glass Set w/ Transport Case (3” FA)

GN-DGS4 Deluxe Method 5 Glass Set w/ Transport Case (4” FA)

deluxe Method 5 Glassware Set

Qty Part Description

1 TC-GW2.5 Glassware Transport Case

4 GN-1 Cyclone Bypass, Unground with O-Ring

4 GNFA-� Filter Assembly, Unground Glass, PTFE Frit, Open Style Aluminum Clamp. - Specify Size 3” or 4”

2 GN-8 Double “L” Adapter, Unground Sockets

2 GN-8-18K Double “L” Adapter with Type K ThermocoupleAssem-bly, Cap and Silicone Seal

3 GN-9AO Greenburg Smith Impinger with Orifice, Unground

7 GN-9A Modified Greenburg Smith Impinger, Plain, Unground

8 GN-11 U-Tube, Unground Sockets


1 GA-3P Filter Tripod

30* O-116S Silicone O-Ring for Grooved #28 Ball

10* O-123V Bottom Viton® O-Ring for Impinger Insert

10* O-126V Top Viton® O-Ring for Impinger Insert

deluxe Method 5 Glassware Set Includes:

* Spares

#28 Ball Joint Sockets are Standard.

Ball Joint Clamps

GLASSWARE ACCESSORIES

Caps & Seals

Product DescriptionO-116V-DZ Viton® O-Ring for

grooved #28 ball, dozenO-116T-DZ TFE Encapsulated

Silicone O-Rings for grooved #28 ball, dozen

O-123V-DZ Viton® O-Ring for bottom groove in Impinger Stem Joint, Dozen

O-126V-DZ Viton® O-Ring for top groove in Impinger Stem Joint, Dozen

#28 Ball Joint & Taper Joints Seals

Product DescriptionBS28WS #28 Stainless steel

ball joint clampRC-29 #28 Stainless steel

ball joint clamp, Pyrex brand

KBS-29 Keck Clip,#29, plastic ball joint clamp

Product Description

GA-GL-18B Bored Cap with hole, #18 threads

GA-18C Solid Cap without hole, #18 threads

GA-GL-18S #18 Silicone Seal Ring, 50 Durometer#18 Threads, 6.5mm Hole Diameter

GA-GL-18ST #18 Silicone with PTFE Seal Ring, #18 Threads,6.5mm Hole Diameter, w/PTFE on half

GA-GL-18T6 #18 Threads Silicone Seal Ring 6.5mmHole Diameter with PTFE on half

GA-GL-18T8 #18/8 PTFE Seal Ring

GA-GL-18/9 #18 Silicone Seal Ring, with PTFE 9 mm to 11 mm

24


800-882-3214 / 919-557-7300 www.apexinst.com

GLASSWARE FILTER ASSEMBLIES & COMPONENTS

Filter Media, page 46-47

4” Unground Glass, PTFE Filter support, OZ Style Threaded Filter Clamp.

gnFa-4Z

Model Description

GN-2S 2” Glass Filter Inlet, #28 Unground Socket, 90 Degree Bend

GN-2B 2” Glass Filter Outlet, #28 Unground O-Ring Ball

GA-2CA 2” Aluminum Filter Clamp, Open Plate Style

GA-2T 2” PTFE Filter Support with Viton® O-Rings

O-138T FEP Encapsualted O-Ring for GA-2T

O-138V Viton® O-Ring for GA-2T

GA-2P 2” Nylon Filter Tripod

GN-2S-18K3” Unground Glass, PTFE Filter Support, Open Style Aluminum Clamp.

gnFa-3

4” Unground Glass, PTFE Filter Support, Open Style Aluminum Clamp.

gnFa-4

2” Filter Components (55mm)

Model Description




GA-4CZ 4” Single Thread Filter Assembly, OZ Style

GA-4T 4” FEP Filter Support with Viton® O-Rings

O-156T FEP Encapsulated O-Ring for GA-4T with Hollow Silicone Core


GA-4P 4” Nylon Filter Tripod

4” Filter Components (110mm)

Open Style Aluminum Clamp, U-Style with90o inlet and outlet, and #18 threaded joint.

gnFa-3u-18

3” Unground Glass, PTFE Filter Support, Open Style Aluminum Clamp, Straight Through Style.

gnFa-3-str

4 inch Filter Assembly, Unground Glass, Poly Donut Spacer with TC assembly, Dual PTFE Frits, Open Style Aluminum Clamp.

gnFa-4-5g

2” Unground Glass, PTFE Filter Support, Open Style Aluminum Clamp.

gnFa-2

2” U-Style Unground Glass, with 90° inlet & outlet, PTFE Filter Support, Open StyleAluminum Clamp.

gnFa-2u

3” Unground Glass Filter Support, OZ Style Threaded Filter Clamp.

gnFa-3Z

Kit with Thermocouple Assembly.

gnFa-3u-18k

Model Description


GN-3SS

GN-3SS-S 3” Glass Short Stem, Straight Inlet with #28 Unground Socket

GN-3S-18 3” Glass Filter Inlet, #28 Unground Socket, 90 Degree Bend #18 screw joint for Thermocouple



GA-3CZ 3” Single Thread Filter Clamp Assembly, OZ Style

GA-3T 3” PTFE Filter Support with Viton® O-Rings

GA-3SS 3” Machined Stainless Steel Filter Support Disk with Viton® O-rings, Accepts 82.6 mm filter

O-152T FEP Encapsulated O-Ring for GA-3T


GA-3G 3” Glass Filter Disk with Rubberized Edge

GA-3P

3” Filter Components (82.6mm)

3” Stainless SteelFilter Support Disk.

ga-3ss

3” Filter PTFE Disk with Viton O-rings.

ga-3t

3” Glass Filter Disk with Rubberized Edge.

ga-3g

25


www.apexinst.com 800-882-3214 / 919-557-7300

INdIVIdUAL GLASSWARE ANd ACCESSORIESApex Instruments offers a complete line of glassware featuring Extra Heavy Borosilicate Glass with unground #28 ball and socket joints with O-Ring seals. Unground joints are more durable and price effective than ground joints and the O-Rings provide a tight, leak-free seal without grease. Standard GN-Series Glassware includes Unground O-Ring joints and double O-Ring 45/50 taper joints.

IMPINGER ASSEMBLIES (BOTTLES WITh INSERTS)

GN-9A GN-9AK GN-9AO-M7GN-9AO

403mm15.867in

Model DescriptionGN-9A Modified Greenburg-Smith

(plain stem), 500 ml

GN-9AO Greenburg-Smith (stem with orifice and plate), 500 ml

GN-9AK Knock-out (short stem), 500 ml

GN-9AO-M7 Method 7 (stem with restricted orifice), 250 ml

CYCLONESModel DescriptionGN-2 Cyclone Body, #28, unground

socket and O-Ring ball

GN-3 Cyclone Flask, #28 unground sockets

GN-2RH Cyclone for Mini Hot Box, Reduced Height, includesTeflon-lined #30 Cap

GN-3GN-2 GN-2Rh

Model DescriptionGN-9I Modified Greensburg-Smith O-Ring balls

(plain stem), unground taper joint with double O-Ring seals

GN-91O Greenburg-Smith (orifice stem), O-Ring ball, unground taper joint with double O-Ring seals

GN-91K Knock-out stem, O-Ring balls, unground taper joint with double O-Ring seals

GN-9I

GN-9IK

GN-9IO

387mm15.0 in

INSERTS

Model DescriptionGN-9B Bottle, unground taper joint, 500 ml,

330 mm x 57 mm

GN-9B-1 1.0 liter, 330 mm x 75 mm

GN-9B-1.5 1.5 liter, 330 mm x 100 mm.

GN-9B-2 2 liter, 330 mm x 110 mm

GN-9B-4 4 liter, 330 mm x 140 mm

GN-9B-M7 Method 7 Bottle, 250 ml, accepts GN-9I. 330 mm x 38 mm

BOTTLES

380 mm.13.0 in.

26


800-882-3214 / 919-557-7300 www.apexinst.com

GFA-2590N-CC

GFA-2590N-CCSUse with these Connections

GFA-2590B-CC

GN-8-18K

GN-1 GN-11 GN-13 GN-8

CONNECTORS

Model DescriptionGN-1 Cyclone Bypass, #28 unground socket and O-Ring BallGN-1-18 #18 Thread for TC (no cap or TC) (not shown)GN-8 Double “L” with #18 Thread for TC. Order

cap and seal separatelyGN-8-18 Double “L” with #18 Thread for TC. Order

cap and seal separatelyGN-8-18K Double “L” withType-K TC assembly,

cap and silicone sealGN-11 U-Tube, #28 unground socketsGN-13 Filter By-Pass, #28 unground socket and O-Ring ball

Glass Cap #28 unground socket.

gn-16

Glass Plug, #28 unground ball with Vitron® O-Ring.

gn-17

Balls and Caps

INdIVIdUAL GLASSWARE ANd ACCESSORIES

Product DescriptionGFA-2590N-CCS GFA-2590 Insert Straight-Thru with

Unground #28Socket to Male Taper Joint, Connects directly to probe. Linear distance socket to taper start 2.5 inches.

GFA-2590B-CC Body for Controlled Condensate Method with ground #28 Ball on outlet

GFA-2590N-CC Insert with “S” Offset, Unground #28 SocketGFA-2590B-CC Body for Controlled Condensate Method with

ground #28 Ball on outletGN-HCCH-A Horizontal Condenser, CCS, Assembly #28

Controlled Condensate Sampling with #11 port for inserting cartridge heater, with Heater and TC assembly, #28 Socket both ends, Water Jacket w/Hose Barbs, TC-well and # 15 Solid Cap

Controlled Condensate Glassware

27


www.apexinst.com 800-882-3214 / 919-557-7300

Model DescriptionGN-20B4 #28 unground O-Ring ball to 1/4” tube

GN-20B6 #28 unground O-Ring ball to 3/8” tube



GN-19 #28 unground O-Ring ball to #22 thread. Order cap and seal separately

AdAPTERS

GN-20BGN-18 GN-18B GN-19 GN-20S

Method 17 Glassware

Product DescriptionGFA-2590N* Nozzle Insert, Glass for

GFA-2590 In-StackFilter Assembly, Specify Nozzle Size (N4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 20)

GFA-2590 Thimble Filter, 25x90mm,Binderless Glass Fiber,Tapered, 10/box

GFA-2590B Filter Body, Glass, for GFA-2590 Filter Assembly, 5/8” shank

Product DescriptionG-47N 4 Nozzle I.D. 1/8”

G-47N 5 Nozzle I.D. 5/32”




Product DescriptionG-47N 10 Nozzle I.D. 5/16”


G-47N 14 Nozzle I.D. 7/16”


Glass Filter Inlet, 47 mm, with Attached Nozzle

CONdENSERS

Product Description

VGC-9A Condenser Assembly-Includes #7 and #11nylon caps with o-rings and PTFE ferrules.

VGC-12A Condenser Assembly-Includes black nylonbushings, caps o-rings and PTFE ferrules.

INdIVIdUAL GLASSWARE ANd ACCESSORIES

VGC-12AVGC-9A

Model DescriptionGN-18 #28 unground socket to hose barb

GN-18B #28 unground O-Ring ball to hose barb

GN-20S4 #28 unground socket to 1/4” tube.

GN-20S6 #28 unground socket to 3/8” tube



GFA-2590N GFA-2590BGF-2590 G-47N

28


800-882-3214 / 919-557-7300 www.apexinst.com

Product DescriptionGNM-HC-18K

GNM-HC Horizontal Condenser, #28 Unground Sockets, Water Jacket Hose Barbs.

GNM-HC-18 Horizontal Condenser, #28 Socket both ends, Water Jacket with Hose Barbs with #18 GL joint for monitoring condenser outlet temperature.

GNM-HC-18F Horizontal Condenser, #28 Socket both ends, #18 joint for monitoring Filter Outlet temperature, Water Jacket with Hose Barbs, Glass Type K thermocouple assembly NOT included.

GNM-T XAD Trap, #28 Unground Socket & O-Ring Ball (Top), Water, Jacket Hose Barbs.

GN-9AKS Knock-Out Impinger Assembly, Unground (for Horizontal MM5)

GN-9AKSA Knockout Impinger Assembly, Unground (for Horizontal MM5)With Long/Short Stems Before Purge on MTHD 202.

Controlled Condensate Method 23 Glassware

GNM-hC GNM-hC-18FGNM-hC-18

Product DescriptionGN-VCHM-M202 M202 Spiral Condenser, #28 Socket

both ends Water Jacket Hose Barbs, High Moisture sources above 15%

GN-VC-M202

GN-9AKS Knock-out Impinger Assembly, Unground, (for HorizMM5)

GNFA-3U-18K 3 inch Filter Assembly, Unground Glass with 90 degree Inlet & Outlet, Open Style Alum Clamp & TC

GN-3S

GN-3S-18

TCA-03X24

TCA-03X24G

Method 202 GlasswareINdIVIdUAL GLASSWARE ANd ACCESSORIES

Product DescriptionGN-9AKSA Knockout Impinger Assembly - 24/40 Taper Unground (for HorizMM5),

Included with Long / Short Stem.

GN-9AKSB Knockout Impinger Bottle - 24/40 Taper Unground (for HorizMM5),Used with Long / Short Stem.

GN-9AKSI Knockout Impinger Stem - 24/40 Taper Short Male, UsedBefore Purge on MTHD 202.

GN-9AKSIL Knockout Impinger Stem - 24/40 Taper Long MaleUsed for Purge on MTHD 202.

GNM-T

GN-9AKSGN-9AKSA

GN-9AKSA

GN-VChM-M202

GN-9AKSIL

GN-9AKSI

GN-9AKSB

GN-9AKS

GNFA-3U-18K

Product DescriptionGN-HCCH

GN-HCCH-A

29


www.apexinst.com 800-882-3214 / 919-557-7300

BALL ANd SOCKET JOINT AdAPTERSGlass-Filled PTFE

PFA FittingsApex offers both Straight and Elbow PFA Fittings with 1/4” NPT for 1/4”, 3/8” and 1/2” tubing and a ball joint with a 5/8” tube union for adapting to plain probe liners. PFA (Perfluoro-alkoxy) fittings are chemically inert and highly corrosive resistant. Higher mechanical strength than PTFE at elevated temperatures (to 500O).

Apex offers Glass-Filled PTFE #28 Ball and Socket Adapters. Glass fiber fillers are added to Virgin PTFE to improve upon the mechanical properties. Adapters are resistant to deformation under a heavy load and will significantly improve the performance of the seal during a test. Glass-filled adapters are tapped for 1/4” NPT fittings.

Glass Filled PTFE#28 Ball to 1/4” Female NPTga-28B4ntg

Glass Filled PTFE#28 Socket to 1/4” Female NPTga-28s4ntg

Glass Filled PTFE#28 Socket to 3/8” Tube Fitting(Includes Nylon Nut & PTFE Ferrule)ga-28s6tg

Probe Liners, page 17

Glass Filled PTFE#28 Ball to 5/8” Tube Fitting(Includes glass Nut, Ferrule and Viton® O-Ring)ga-28B10tg

Glass Filled PTFE Ferrules5/8” Glass Filled PTFE Ferrule

ntg-10F

5/8” Glass Filled PTFE Ferrule, Dozen

ntg-10F-dZ

Glass Filled PTFE NutGlass Filled PTFE 5/8” Tube Nut

n-10tg

Glass Filled PTFE UnionTube Union, 5/8” Body Only

ntg-10unn

Glass Filled PTFE Union5/8” Union (includes nuts and ferrules)

ntg-10u

PFA Straight Connectors:

PFA Elbow Connectors:

3/8” Tube Fitting to 1/4” MNPT6msC4n-pFa



1/2” Tube Fitting to 1/4” MNPT8msel4n-pFa



30


800-882-3214 / 919-557-7300 www.apexinst.com

Stainless Steel Impingers and Accessories are manufactured with #28 Ball and Sockets, 2” diameter and a 500ml capacity. Stainless Steel Impingers are interchangeable with glass impingers for many applications. This kit includes an impinger with Double “L” Inlet Stem, one impinger with restricted inlet U-Stem, two impingers with plain inlet U-Stem, straight inlet stem, five #28 ball joint clamps.

Stainless Steel Ball Adapters#28 Ball to 1/4” FNPTga-28B4n

Stainless Steel Socket Adapter#28 Socket to 1/4” Tube Fittingga-28s4

#28 Socket to 1/4” FNPTga-28s4n

#28 Socket to 3/8” Tube Fittingga-28s6



BALL ANd SOCKET JOINT AdAPTERSApex Instruments offers Stainless Steel #28 Ball and Socket Adapters in a variety of sizes, used for connecting to rigid or flexible sample lines. The #28 Ball includes O-Ring (O-116V).

Model Description

S-9A6 Impinger Bottle, 500 ml, 2” diameter, 3/8” Tube Unions, Q-Clamp, No Stem, Stainless Steel

S-9AL Impinger Double “L”, Inlet Stem and #28 Socket and Ball with, Stainless Steel

S-9AO Impinger with Restricted Inlet U-Stem, #28 Socket and Ball, Stainless Steel

S-9A Impinger with Plain Inlet U-Stem, #28 Socket and Ball, Stainless Steel

S-9IL Double “L” Inlet Stem, #28 Socket with Plain End, Stainless Steel

S-9IS Straight Inlet Stem, #28 Ball with Plain End, Stainless Steel

S-9IR U-Stem Inlet, #28 socket on 3/8” Tube with Restricted Tip, Stainless Steel

S-9I U-Stem Inlet, #28 socket on 3/8” Tube with Plain Tip, Stainless Steel

S-9IT Stem Outlet, #28 Ball with O-Ring on 3/8” Tube, Stainless Steel

S-9C2 2” Q-Clamp with Wing Nut, Stainless Steel

40MPU-2 For 2” Q-Clamp, Gasket Buna

S-9B Impinger Bottle Only, 500 ml, Stainless Steel

STAINLESS STEEL IMPINGERS ANd ACCESSORIES

Stainless Steel Impingers and Accessories

#28 Socket 3/8” Elbow Tube Fitting ga-28s4el6

Stainless Steel Socket & Elbow Adapter

Double “L” with #28 Sockets and 1/4” Union for Thermocouple. (TCA-6X24).s-8-4

Stainless Steel Double “L” Connector U-Tube connector with #28 Sockets.s-11

Stainless Steel U-Tube Connector

1/4” Tube Fitting to 1/4” MNPT4msC4n-s3/8” Tube Fitting to 1/4” MNPT6msC4n-s1/2” Tube Fitting to 1/4” MNPT8msC4n-s

1/4” Tube Fitting to 1/4” MNPT 4msel4n-s3/8” Tube Fitting to 1/4” MNPT6msel4n-s1/2” Tube Fitting to 1/4” MNPT8msel4n-s

Stainless Steel Male Elbow Connector

Stainless Steel Straight Adapter

s-8-4kDouble “L” Adapter w/Thermocouple Kit

S-9I

S-9B

S-9IT

S-9IS

S-9IL

BS28WS

S-9AL S-9AO S-9A S-9ATHE SECOND IMPINGER HAS A RESTRICTOR

AT THE BASE OF THE STEM.

See Page 23 for Ball Joint Clamps

Fitting SizeTube Union

4N=NPT (Female)

Set of 4 Stainless Steel Impingers - Stainless Steel Impinger Condenser Assembly, #28 Socket & Ball, Methods 4, 5 and 17. S-5CN

31


www.apexinst.com 800-882-3214 / 919-557-7300

Model Description Qty.SN-5C Stainless Steel Impinger Assembly, #28 Socket & Ball, Includes: SN-9A (3x), SN-9AO (1x),

SN-11 (3x), SN-8-4 (1x), BS28WS clamps (8x), KST-45 Keck Clips (4x). Set

Model Description Qty.SN-9A Stainless Steel impinger Assembly, insert with bottle, straight stem, #28 balls (2), machined cap,

#45 keck clip, 750 ml max capacity. (Discounted Assembly Price).3

SN-9I Stainless Steel Impinger insert only, 3/8” plain stem, #28 balls, machined 1

SN-9B Stainless Steel Impinger Bottle only, 750 ml capacity, with threaded cap 1

KST-45 Keck Clip, size 45, plastic, used on SN-9A & SN-9AO SS impinger assemblies 1

SN-9AO Stainless Steel impinger Assembly, insert with bottle, with 1/16” stem orifice, #28 balls (2), machined cap, #45 keck clip, 750 ml max capacity. (Discounted Assembly Price).

1

SN-9IO Stainless Steel Impinger insert only, orifice stem, #28 balls, machined 1

SN-9B Stainless Steel Impinger Bottle only, 750 ml capacity, with threaded cap 1

KST-45 Keck Clip, size 45, plastic, used on SN-9A & SN-9AO SS impinger assemblies 1

SN-11 U-Tube, #28 Sockets, Stainless Steel 3

SN-8-4 Double “L” Adapter, #28 Stainless Steel Sockets, & 1/4” TU for TCA-6X24 (Sold Separately) 1

BS28WS #28 Stainless Steel Ball Joint Clamp, Generic, with Screw 8

O-Rings O-Ring, Silicon Duro 40, Red 1

Stainless Steel Impingers and Accessories

Stainless Steel Impinger Set

New Stainless Steel Impinger Set and Accessories featuring stainless steel sport bottle with precision or custom fabricated press-in insert. Impingers are manufactured with #28 Ball and Sockets, 2-3/4” diameter and a 750ml capacity. Stainless Steel Impingers are interchangeable with glass impingers for many applications. This kit includes the standard method 5 configuration: 3 plain stem impingers and 1 with an orifice. This new design makes it easier to add ice to your impinger case.

New StAINleSS Steel IMpINger Set AND AcceSSorIeS

SN-9ASN-9ASN-9AOSN-9A

SN-8-4

BS28WSSN-11

KST-45

SN-9I

SN-9B

9-1/2”

SN-9IO

32


800-882-3214 / 919-557-7300 www.apexinst.com

SPLIT BACK UMBILICAL CABLESplit Umbilical Cables replace Standard Umbilical Cords for added versatility. They are constructed the same way as the Standard Method 5 umbilicals with the sample line and exit thermocouple split to the specified length. Split umbilicals are useful in flexible systems when the filter compartment is separated from impinger box with a flexible sample line such as Method 17, Flexible Method 5 set-ups and Compact Method 5. The umbilical lengths are specified according to overall length. Stainless steel quick connects are standard.

Split -Back Umbilical Cord

Aux

Exit

Sample 1/2” QCStack

To Meter Console

Orsat

Pitot 1/4” QC Probe

Filter

Oven

Amphenol

6 connectors

Filter

Split Umbilical Cord

Split Umbilical CablesModel descriptionUS-30-10 30’ Umbilical w 10’ Split 1/4” Pitot Quick Connects, Stainless Steel Quick Connects

US-60-10 60’ Umbilical w 10’ Split 1/4” Pitot Quick Connects, Stainless Steel Quick Connects

US-90-10 90’ Umbilical w 10’ Split 1/4” Pitot Quick Connects, Stainless Steel Quick Connects

Alternate Lengths Available, Call for Pricing

Umbilical Cord BagLarge Canvas Bag with straps and logo u-Bag

33


www.apexinst.com 800-882-3214 / 919-557-7300

CLASSIC UMBILICAL CABLES Are lightweight with braided cover. The easily repaired umbilical cable includes one kink-free, wire reinforced sample line, 3 kink-resistant polyethylene lines (2 pitot & 1 orsat line), 6 type K thermocouple extensions, and five conductor electrical cable with 4-pin circular connectors. Thermocouple plugs are colored coded. The sample line has 1/2 inch quick connect and the pitot lines have 1/4 inch quick connects standard (3/8 inch optional). Standard lengths are 30, 60 and 90 feet. U-bag included.

Classic Umbilical CordModel descriptionU-30 30’, Method 5, 1/4” Pitot Quick Con-

nects, Stainless Steel Quick Connects

U-60 60’, Method 5, 1/4” Pitot Quick Con-nects, Stainless Steel Connects

U-90 90’, Method 5, 1/4” Pitot Quick Con-nects, Stainless Steel Quick Connects

Model descriptionU-BAG Large Canvas Bag with straps and logo

QS4/6 Stainless Steel Quick Connects 1/4” Male, 3/8” Female Pitot Quick Connects

QS6 Stainless Steel Quick Connects 3/8” Male and Female Pitot Quick Connects

Optional Accessories

CLASSIC UMBILICAL AdAPTERS

UA-hJ

Power Box Adapter (UA-3J)The UA-3J connects to umbilical 4-pin circular connector and converts to three straight blade receptacles. Clamps to 1/2 inch sample line or GA-100 adapter. The UA-3J is used in conjunction with the Compact Method 5, Method 8, Method17 and in other sampling situations in which power for the probe is not available due to the absence of a heated filter box.

ua-3Jua-3J-V

Probe Power Adapter (UA-hJ)Connects to umbilical 4-pin circular connector and converts to a single female receptacle for the probe power.

ua-hJ

UA-3J UA-3JV

UA-FPheated Filter Box Power Adapter (UA-FP)The UA-FP connects with male plug to the 4-pin circular connector on the filter oven and allows the oven to connect to a standard receptacle.

ua-Fp

heated Filter Box Power Adapter (UA-FP2)Heated Filter Box Power Adapter, Includes one (1) 4 Socket Amphenol to two (2) Male Standard 120V Plugs

ua-Fp2UA-FP2

34


800-882-3214 / 919-557-7300 www.apexinst.com

UNhEATEd SAMPLE LINES

USL-�-SSTConnects to the

SB-2M

USL-�-QSTConnects to the SFA-82h

USL-�-SSConnects

Probe Liner to Impinger

Unheated Sample LineModel descriptionUSL-�-� USL- � Length in feet / � SST (#28 socket elbow fitting) or QST

(1/2” quick connects/#28 socket elbow)

USL-10-SST 10’ Unheated, PTFE/Stainless Steel Overbraid, w/Thermocouple Assembly, #28 Stainless Steel, Socket Elbow Fittings

USL-10-SS 10’ Unheated Sample Line, 3/8PTFE/Stainless SteelPTFE with SS overbraid, #28 Socket Elbow Fitting Both Ends

USL-15-SST 15’ Unheated, PTFE/Stainless Steel Overbraid, w/Thermocouple Assembly, #28 Stainless Steel, Socket Elbow Fittings

USL-25-SST 25’ Unheated, PTFE/Stainless Steel Overbraid, w/Thermocouple Assembly, #28 Stainless Steel, Socket Elbow Fitting

USL-10-QST 10’ Unheated, PTFE/Stainless Steel Overbraid, 1/2” Female Stainless Steel Quick Connect, w/Thermocouple Assembly, #28 Stainless Steel Socket Elbow



Unheated Sample Line jumpers are used between the probe liner or filter and the first impinger in “flexible” sampling arrangements. Jumpers are available in various lengths and configurations. Stainless steel overbraid 3/8” ID PFA tubing is standard.

hEATEd SAMPLE LINES (JUMPERS)Heated Sample Line Jumpers are used when source sampling site has limited access and insufficient space for a traditional, rigid sample train. Apex Instruments manufactures short heated sample lines/jumpers for use between the heated filter assembly and the first impinger inlet. For all Self-Regulating Heated Sample Lines, the National Electric Code requires ground fault protection of equipment for each branch circuit supplying electrical heating cables or devices.

heated Sample Line JumperHSL-�-� hSRL - � Diameter of each sample or cal gas tubing (4 = 1/4”, 6 = 3/8”, 8= 1/2”)

- � Length of line in feetHSL-6-10 10’, 3/8” PFA Sample Line, with Insulation & Protective Sleeve, 120V, ~ 20 Watts / Per Ft.

HSL-6-15 15’, 3/8” PFA Sample Line, with Insulation & Protective Sleeve, 120V, ~ 20 Watts / Per Ft.



HSL-6-10V 10’, 3/8” PFA Sample Line, with Insulation & Protective Sleeve, 240V, ~ 20 Watts / Per Ft.




Add “V” to end of part number for 240V at no extra cost. Temperature Controller Required.

35


www.apexinst.com 800-882-3214 / 919-557-7300

heated Sample Lines/Jumpers

STRAIN RELIEFMini heated Filter Box Sample Line Strain ReliefThe GA-107 strain relief is used with sample lines at the SB-2M during Flexible Method 5 sampling. Includes bracket that attaches to the SB-2M and standard mount with sample line clamp (specify size).

Model description

GA-107-9 Line Adapter (for SB-2M), includes Bracket and 3/8 inch ID Sample Line Clamp

GA-107-12 Line Adapter (for SB-2M), includes Bracket and 1/2 inch ID Sample Line Clamp

GA-107-32 Line Adapter (for SB-2M), includes Bracket and 1-1/4 inch ID Sample Line Clamp

GA-107-50 Line Adapter (for SB-2M), includes Bracket and 2 inch ID Sample Line Clamp

GA-107-57 Line Adapter (for SB-2M), includes Bracket and 2-1/4 inch ID Sample Line Clamp

The GA-113 strain relief is used specifically with heated sample lines at the SB-2M during Flexible Method 5 sampling. Includes bracket that attaches to the SB-2M and an adjustable Velcro® strap to grip heated sample lines.

GA-113

GA-107-� GA-113

NEW SELF-REGULATING hEATEd SAMPLE LINES (JUMPERS)Apex’s New heavy duty Self Regulating heated Sample Lines are custom manufactured to be rugged, lightweight and flexible. The heater cable is self-regulating and maintains the sample line at a constant temperature up to 250°F (120°C) over the entire length of the line. The standard core is typically comprised of PFA tubing, 3/8” for the sample and 1/4” for the calibration gas. The heated core is insulated with several layers of braided lightweight Pyron OPF yarn that will not burn or conduct electricity. The braided construction provides extreme flexibility, strength, and protects the heater cable by minimizing movement. The bundle is protected by a tough high temperature silicone coated fiberglass sleeving.

Advantages/Features• Rugged, Lightweight & Flexible• Suitable for Permanent Installations or Portable use • Braided Construction with High Temperature Jacket• High Quality Components

Options/Accessories• Replaceable core, (flexible conduit) pass through power and thermocouples for the probe oven heaters.• Cam-Lock fittings for easy installation and serves as a strain-relief.

Heater Cable 15 w/ft @ 50°F (10°C) 49 w/meter

Supply Voltages: 120 or 220Vac

Maintenance Temperature: Up to 250°F (120°C)

Maximum Exposure Temperature:

366°F (185°C)

Cable Specifications

Circuit Breaker SizeMaximum Length (Ft.) 120VAC 240VAC

15 amp 80

20 amp 110

30 amp 135

Circuit Breaker Size Vs. Maximum Length in Feet

160

215

270

36


800-882-3214 / 919-557-7300 www.apexinst.com

METhOd 4 SAMPLING TRAIN

Flexible Method 4 Arrangement

Rigid Method 4 Arrangement

Method 4 Determination of the Moisture Content of Stack Gas Summary: Stack gas is extracted at constant rate (less than 21lpm) and a minimum volume of 600 liters. Moisture is removed from the sample stream, and measured volumetrically or gravimetrically.

sk-m4

sk-m4-V

Part DescriptionPC10-4S CEM IRM Probe, 4ft,

Stainless Steel Sheath,5/8” Stainless Steel Liner.

PLS-4S-QCF6 Probe Liner, 4ft, SS, w/Full Flow, 3/8” QC.

USL-15-QS 15ft Unheated Sample Line, PTFE with SS Overbraid, #28 Socket Elbow Fitting and Full Flow 3/8” QCF Elbow Fitting.

SB-8 Probe Clamp FrameGN-CG4 Method 4 Glassware Set,

Unground Joints.SB-3 Impenger box, Model 100,

Insulated Cooltant Reservoir, Holds 4 Impingers

GA-100 Sample Case AdapterUS4-25-10 U-Cord, Method 4, 25”,

Splitback 10ft.

Method 4 Individual Accessories

Meter Consoles, page 4-11

Meter Console Sold Separately

XC-40 Meter ConsoleRecommended forMethod 4 Testing

37


www.apexinst.com 800-882-3214 / 919-557-7300

BASIC-PLUS METhOd 5For a source sampling company to get started sampling for particulates (U.S. EPA Reference Method 5), Apex recommends a combination of equipment that can be configured for both rigid and flexible set-ups.Select your METER CONSOLE (see page 8-10)Select your SAMPLE PUMP (see page 12 - 13)

sk-m5Bp

sk-m5Bp-V

Basic Method 5 Includes:• Stainless Steel Nozzle Set• 6-ft Probe with Heater• 1 Stainless Steel Probe Liner, 3 Glass Probe Liners• 30-ft Split U-Cord• 15-ft Unheated Sample Line• Hot & Cold Box Assembly with Riser• Sample Frame for Cold Box (Flexible Config.)• Strain Reliefs• Basic Glassware Set (1 sample run configuration)• Filter Paper• Brushes (Probe & Nozzle)• Calculator (programmed for Method 5)

dELUXE-PLUS METhOd 5The professional source sampling company must be prepared for a wide variety of con-ditions and locations. Apex recommends the “Deluxe Plus” system, which can be used in both rigid and flexible configurations. Even with the classic rigid arrangement, the ad-ditional glassware allows you to have pre-measured and filled impingers, pre-weighed filter assemblies, and minimum turnaround time between runs. The flexible arrange-ment is effective for challenging environments like vertical traverses and space-limited sources. After selection of a meter console and external sample pump, the Deluxe-Plus system provides all of the components listed in the above Basic-Plus system.

Schematic of Method 5 Flexible Sampling Train

Schematic of Method 5 Rigid Sampling Train

deluxe-Plus Method 5:• Glass Nozzle Set• 3-ft & 9-ft Probe Assemblies with • Stainless Steel & Glass Probe Liners• 60-ft Split U-Cord• 2.5 Sets of Glassware Plus Carrying Case• 4 Monorail Assemblies (9-ft & 12-ft)• Transport Case for a Meter Console• Calibrated Orifice Set

sk-m5dp

sk-m5dp-V

38


800-882-3214 / 919-557-7300 www.apexinst.com

COMPACT METhOd 5The Apex Compact Method 5 Sampler Kit features an independently Heated Stainless Steel Filter Assembly (SFA-82H) that connects directly to a standard Method 5 probe. It does not require a separate heated filter compartment, and utilizes a flexible sample line, and a split umbilical cord with power adapter, to allow sampling in space-limited areas. The standard glass impingers have been replaced with Stainless Steel Impingers (S-5CN) to eliminate glass breakage. Three filter assemblies are recommended to speed up the turn around time between consecutive runs. Add “V” to end of part number for 240V option at no additional cost.

sk-Cm5

sk-Cm5-V

STAINLESS STEEL hEATEd FILTER ASSEMBLYThe Apex Instruments Heated Stainless Filter Assembly (SFA-82H) is for sampling particulates from space-limited industrial sources. The filter assembly has a two piece threaded clamping ring with an integral 300 watt ring heater . A Viton® O-Ring seals the 82.6 mm filter and prevents sample bypass. It has stainless steel inlet, outlet and a PTFE filter support screen (GA-3T). The inlet plate comes with a 5/8” tube union for swaging directly to a plain probe liner. The outlet plate has 3/8” female NPT connection and a male 3/8” full flow quick connect. The mating female quick connects with the thermocouple, which is supplied with the Unheated Sample Line (USL-�-QST) or SFA-82-QCF6, may be ordered separately. There is a thermal insulated blanket supplied with each unit. An unheated version is also available without the integral heater and blanket. Add “V” to end of part number for 240V at no extra cost.

SFA-82 (unheated)sFa-82hsFa-82hVsFa-82-qCF6sFa-82-Bkt

SFA-82hDepending upon the source, it may be possible to combine

Method 5 and Method 8 into the same train.

SK-CM5 Kit• Heated Filter Assemblies (3)• Probe Sheath with Heater • Stainless Steel Probe Liner• Impinger Box • Impinger Inlet Strain Relief• 60’ Split Umbilical Cord• Unheated Sample Line with Stainless Steel Overbraid• Power Box Adapter • Umbillical Adapter • Stainless Steel Nozzle Set• Stainless Steel Impinger Assembly• PTFE Coated Glass Fiber Filters

Schematic of U.S. EPA Method 5 Compact Sampling Train

SFA-82-QCF6

SFA-82-BKT

39


www.apexinst.com 800-882-3214 / 919-557-7300

METhOd 5GMethod 5G Determination of Particulate Matter Emissions from Wood Heaters (Dilution Tunnel Sampling Location). The exhaust from a wood heater is collected with a total collection hood, and is combined with ambient dilution air. Particulate matter is withdrawn proportionally from a single point in a sampling tunnel and is collected on two glass fiber filters in series.

gnFa-4-5g

Components Include:4” Filter Assembly, Unground Glass #28 Ball/Socket, Poly Donut Spacer with ThermocoupleAssembly, Dual PTFE Filter Supports and Open Style Aluminum Clamp.

ALTERNATE METhOd 5I FILTER ASSEMBLY (Straight) Same Application as Method 5IStraight version of SGFA-47-5I, for use with SB-2M-ST, straight through heated filter box.

sgFa-47-5is

SGFA-47-5IS

SGFA-47-5I

GNFA-4-5G

METhOd 5I The METHOD 5I SAMPLING KIT is similar to Basic Method 5, except for the addition of the 5I Holder (SGFA-47-5I) and is designed for the determination of low-level particulate matter (PM) emissions from stationary sources. Method 5I is most effective for PM catches less than 50 mg and is valid for performing correlation of manual PM measurements to PM con-tinuous emission monitors or determining PM emissions from low-level sources such as turbines. Add “V” to end of part number for 240V at no extra cost. After selecting a Method 5 Meter Console and an external sample pump in conjunction with a Method 5 kit, add a Method 5I Holder.

The 5I Filter Holder inlet is constructed of Borosilicate Glass to hold a 47mm glass fiber filter with a wafer-thin stainless steel filter support and a Viton® O-Ring. The assembly is wrapped with PTFE tape for weighing, averaging less than 35 grams, providing a positive seal against leakage. Method 5I 47mm Filter Assembly with Glass Inlet & SS Outlet, with 2 45 deg bends.

sgFa-47-5i

40


800-882-3214 / 919-557-7300 www.apexinst.com

Controlled Condensate is an alternative to EPA Method 8 for determining sulfuric acid emissions. Sulfuric acid vapor or mist and the sulfur dioxide are separated, by controlling the condensation based on difference in dew points, and both fractions are measured separately by the barium-thorin titration method. Controlled condensation method is the primary sampling and analytical tool for quantifying sulfuric acid emissions from stationary sources. The method is based upon the selective condensation of sulfuric acid from a gas stream by means of a water cooled condenser. The major advantage of the condensation method is that it provides reliable reproducible SO3 and SO2 values with minimal interference from high SO2 concentrations. There are several versions of the method. Option “V” is added for 240V.

sk-CC

sk-CC-V

METhOd 8

Method 8 Sampling Kit

Part Description

SB-8 Sample Frame with Probe Clamp

UA-3J Power Box Adapter

GNFA-2U 2” Filter Assembly,Unground Glass with 90° Inlet and Outlet,Open Style Alum Clamp

METhOd 8 RECOMMENdEdACCESSORIES

CONTROLLEd CONdENSATEConditional Test Method CTM-13

Quartz Liner Available

Glass Liner

GFA-2590#-CC SB-2M-STCC

Sampling Kit Available

The Method 8 Sampling Kit is used with either the XC-522 or XC-572 Meter Console and an external sample pump for the determination of sulfuric acid mist and sulfur dioxide emissions from stationary sources. U.S. EPA Reference Method 8 was originally developed to test emissions from sulfuric acid plants but has been adapted to sample emis-sions from sulfur dioxide sources. Call for details on Flex-ible Arrangements. Add “V” to end of part number for 240V at no extra cost.

Schematic of EPA Method 8 Sampling Train

UA-3J

GA-100

SB-3SB-8

PS- H PLN- GGlass Lined Probe

Glass NozzleNG-

US- -10

772 Watts Heater

41


www.apexinst.com 800-882-3214 / 919-557-7300

Schematic of EPA Method 17 Flexible Sampling Train

Schematic of U.S. EPA Method 17 Rigid Sampling Train

In Method 7C and 7d an integrated sample is passed through a series of full-size orifice impingers that contain an alkaline-potassium permanganate solution. The sample rate is between 400 and 500 cc per minute, normally three one hour samples are collected per test. The MC-623 is the console of choice, however, a low flow orifice adapter is offered for converting the XC-572 Method 5 source sampler console for low flow sampling. The Method 7C sample is analyzed colorimetrically and for Method 7D analysis is by ion chromatography. Please inquire for additional details. Add “V” for 220VAC option.

Ck-m7Cd

METhOd 7C and 7d

Model descriptionPC10-3G 3 ft CEM Probe Assembly, 5/8” Glass liner, 110 VAC

PLN-3G 3 ft Glass Probe liner, 5/8” OD with unground #28 grooved ball

GN-8 Double”L” Adapter, #28 unground sockets

GN-11 U-Tube, #28 unground sockets

GN-9AO-M7 Impinger Assembly, Stem with Orifice, 250 mL, unground O-ring joints

Method 7 Accessories

PC10-3G

GN-9AO-M7GN-9A

SB-3

GN-8GN-11

SB-8

Method 17 Sampling Kit Components Include:• In-stack Filter Assembly

• Glass Fiber Thimbles

• Method 5 Probe Sheath with Tube Heater

• Method 17 Probe Liner w/ 3/8” Full Flow Male Quick Connects

• Unheated Sample Line with PFA Over braid

• 30’ Split Umbilical Line

• Power Box Adapter

• Sample Case Adapter

• Impinger Inlet Strain Relief

• Impinger Box, Insulated Coolant Reservoir

• Stainless Steel Nozzle Set

• Stainless Steel Impinger Assembly

sk-m17psk-m17p-V

METhOd 17 PLUS (RIGId & FLEXIBLE)The Apex Instruments Method 17 Sampling Kit is a convenient package for sampling particulate matter. Multiple fitting arrangements and filter assemblies are available with an in-stack filter. Add “V” to end of part number for 240V at no extra cost.

GN-9A Impinger Assembly, Plain Stem, 500 mL, unground O-ring joints, modified Greenburg-Smith

GA-100 Umbilical Adapter (Gooseneck) , #28 Socket with thermocouple, mounting bracket, 1/2” Male quick connects

SB-3 Impinger Box/Insulated Coolant Reservoir Model 100, holds 4 impingers

SB-8 Modular Sample Frame with Probe Clamp and Impinger Box Slides

42


800-882-3214 / 919-557-7300 www.apexinst.com

SFA-4(Nozzles not included)

INTEGRATEd IN-STACK FILTER ASSEMBLY KIT The SGFA-47NK In-Stack Filter assembly kit features the unique design combination of borosilicate glass 47mm filter inlet with integrated nozzle, allowing the option to weigh the glass fiber filter media individually for Method 17 or very similar to Method 5I by weighing the combined nozzle, filter media with a support, O-Ring and PTFE Tape. The kit includes the standard array of seven nozzle sizes from 1/8” to 1/2”.

sgFa-47nk

METhOd 17 IN-STACK FILTER ASSEMBLIES

GLASS IN-STACK FILTER ASSEMBLIESThe Apex Instruments GFA-2590 Thimble Holder is constructed completely from borosilicate glass for use with Conditional Method for Ammonia (CTM-027) and accepts tapered 25 x 90mm thimbles, specifically manufactured for stack sampling. Does not require O-Rings, for testing at higher temperatures. The borosilicate glass withstands temperatures up to 480°C (900°F).

Nozzle Insert - Replace � with nozzle diameter. (Sizes 4-16). Call for additional sizesGFA-2590N�

Filter Body - 5/8” Glass Filter BodygFa-2590B

Metal Taper Joint Clamp - A durable nickel plated steel clip that securely holds the conical joint under pressure to withstand temperatures of up to 500°C (932°F).ktm-29

In-Stack Filter Assembly using a 47 mm diameter Filter Element.sFa-47

In-Stack Filter Assembly using 19mm x 90 mm Thimble Filter Element.sFa-190In-Stack Filter Assembly using 30mm x 100 mm Thimble Filter Element.sFa-300

In-Stack Filter Assembly using 25mm x 90mm Thimble Filter Element.sFa-2590

Inconel Version SFA-47INCO...call for price

Filter Inlet 47 mm Glass Filter Inlet with Integrated Nozzle. Replace � with nozzle diameter.

Part descriptionO-128V Viton® O-Ring for SFA-2590 (450 °F)

O-324S Silicone O-Ring for SFA-300 (500 °F)

O-324G Graphite O-Ring for SFA-300 (1000 °F)

O-324V Viton® O-Ring for SFA-300 (500 °F)

Q4213 Viton® Quad Ring for SFA-190 (450 °F)

O-223V Viton® O-Ring, 47 mm for SFA-47 (450 °F)

O-223H High Temperature Stainless Steel O-Ring for SFA -47

SF-TT20 PTFE Thrust Ring for SFA-47 Filter Assembly

Replacement Seals

Filters and Thimbles, page 46

GFA-2590K In-Stack Thimble holder Kit - Includes a selection of the seven most commonly used nozzle inserts from 1/8” to 1/2” and one housing. Kit is conveniently packaged in a foam-lined carrying case for protection. The thimble holder connects directly to the end of the probe with a 5/8” tube union.gFa-2590k

Nozzle Size

GFA-2590N □ Nozzle Insert GFA-2590B

Filter Body

5/8” ShankKTM-29 CLIP

Product Glass Filter Inlet Integrated Nozzles

G-47N-4 47mm, with Attached Nozzle, Nozzle I.D. 1/8”









Call for Pricing of Quartz Components

43


www.apexinst.com 800-882-3214 / 919-557-7300

Schematic of Method 23 Sampling Train

METhOd 23 dELUXE PLUSThe Apex Instruments Method 23 (Modified Method 5) Source Sampler Kit is utilized for Method 23 determination of dioxins and furans (D/F’s) and/or Method 0010 Determination of Semi-Volatile Organic Compounds. The sampling train is identical to the standard Method 5 system with the addition of a water-cooled glass condenser and an XAD absorbent module followed by a knockout impinger. Additional glassware configurations are available. Please call for information.

Select Meter Console and External Pump for M23 then add a kit. Add “V” to part number for 240V option at an additional cost.

sk-m23dp

sk-m23dp-V

Product Conversion Accessories

SB-4 Impinger Box/Insulated Coolant Reservoir Model 150, Holds 8 Impingers

MM5-P Submersible Coolant Pump, 120V

GN-16 Glass Cap #28 Socket, Unground, to Seal XAD Trap

GN-17 Glass Plug #28 Ball, Unground, to Seal XAD Trap

KBS-29 Clip, Knock, Plastic out Impinger, Unground

TL-7/5 Latex Tubing, 7/16 OD, 5/16 ID, Natural Color, Per Foot

Method 23 Individual Accessories

Product description

GNM-HC Horizontal Condenser, #28 Unground Sockets, Water Jacket, Hose Barbs

GNM-VC Vertical Condenser, #28 Unground Sockets, Water Jacket Hose Barbs

GNM-T XAD Trap, #28 Unground Socket nd O-Ring Ball (Top), Water, Jacket Hose Barbs

GN-9AKS Knock-Out Impinger Assembly, Unground (for Horizontal MM5)

Method 23 Glassware

Requirements:• Borosilicate Glass or Quartz Nozzles and Probe Liners are recommended.• Wrap XAD sorbent module with aluminum foil to shield from radiant heat and ultraviolet rays that dechlorinate the D/F isomers.• Sealing greases are not allowed. FEP O-Ring seals are recommended and may be required by some agencies.• Flexible train requires heated flexible sample lines.

Coolant Pump OptionsProduct Description

MM5-P Submersible Coolant Pump, 110V

MM5-PM Mini Submersible Coolant Pump, 110V

MM5-P220 Submersible Coolant Pump, 220V

MM5-P MM5-PM

M23 Sampling Train

Method 23 Source Sampler Kit Components:• 6’ Probe with Heater• Glass Probe Liners (3)• Glass Nozzle Set• Hot/Cold Box/Riser• 30’ Split-Back Umbilical • Glassware, Deluxe Set

• Horizontal Condensers (2)• XAD Traps (8)• Submersible Recirculating Pump• Probe and Nozzle Brushes• Programmed Calculator

44


800-882-3214 / 919-557-7300 www.apexinst.com

METhOd 26A – hCl

M26A Sampling Train

The Apex Instruments Method 26A Sampling Train is used for determination of hydrogen halide and halogen emis-sions. Method 26A is the isokinetic alternative to Method 26. This method is particularly suited for sampling sources controlled by wet scrubbers emitting acid particulate matter. The method requires a Method 5 sampling train with the use of additional impingers, reagents and PTFE coated glass fiber filter media. Please call for more information. Add “V” to end of part number for 240V at no additional cost.



NG-SET Set of 7 Glass Nozzles - Sizes 4,6,8,10,12,14&16, Includes Case and Three 5/8” Glass Filled PFA Ferrules

NBT-1/2 Nozzle Brush, 1/2” diameter, PTFE Bristles

PBX-10T 10 foot Flexible PTFE Probe Brush Extension, Brush not Included

PBT-5/8 PTFE Probe Brush Tip (PTFE Barrel and Bristles), 5/8 inch Bristle Diameter

GN-9AK Knock-Out Impinger, Short Stem, 500ml, Unground O-Ring Joints

GN-9AO Impinger Assembly, Stem with Orifice & Plate, 500ml, Unground O-Ring Joints, Greenburg-Smith

GF-3TPG 82mm PTFE Coated Glass Fiber Filters - Hydrophobic, Low absorption of acid gases such as SOX or NOX . 50/box (MFS PG60)

Method 26A Recommended Accessories

Schematic of Method 26A Sampling Train

When stack temperatures exceed 210oC (410oF) a one-piece glass nozzle/liner assembly is recommended.

45


www.apexinst.com 800-882-3214 / 919-557-7300

The METHOD 29 determination of metal emissions from hazardous waste incinerators involves a modification of the Method 5 train. The sampling train is the same as a Method 5 particulate train with the addition of up to three impingers to enhance the collection of metals of interest. The impinger train requires the SB-4 impinger case, glass nozzles, probe liners and non-metallic union. The method has been validated for the collection of 17 different metals.

Add “V” to end of part number for 240V option at no additional cost.

METhOd 29 – MULTIPLE METALS

Schematic of Method 29 Sampling Train

The standard glass filters are replaced with low background quartz filters. The impinger solutions are specific for different metals. Recovered samples are digested and appropriate fractions are analyzed by various means; inductively coupled argon plasma emission spectroscopy (ICPES), atomic absorption spectroscopy (AAS) or graphite furnace AAS, depending upon sensitivity required or the matrix effects on the specific analyte.

M29 Sampling TrainProduct Conversion Accessories



GF-3QR 3 inch Quartz Fiber Filters-100/box (MFS QR100 82mm)

GN-9AK Knock-Out Impinger, Short Stem, 500ml, Unground O-Ring Joints

GN-9A Modified Greenburg-Smith Impinger (Plain), Unground

GF-3Q 3 inch Quartz Fiber Filters-25/box (Pallflex 8.26cm)

PBT-5/8 PTFE Probe Brush, Extension, 10 Foot Flexible (Brush Not Included)

PBX-10T PTFE Probe Brush, 5/8” diameter, 4” length, 8-32 thread

NBT-1/2 Nozzle Brush, PTFE, 1/2 inch

Method 29 Recommended Accessories

46


800-882-3214 / 919-557-7300 www.apexinst.com

In the Ontario-Hydro Method (ASTM D6784-02) a sample is withdrawn from the flue gas stream isokinetically through probe/filter system, maintained at 120OC (250OF) or the flue gas temperature (whichever is greater), followed by a series of impingers in an ice bath. Particle-bound mercury is collected in the front half of the sampling train. Oxidized mercury is collected in impingers containing a chilled aqueous potassium chloride solution. Elemental mercury is collected in subsequent impingers (one impinger containing chilled aqueous acidic solution of hydrogen peroxide and three impingers containing chilled aqueous solutions of potassium permanganate). Samples are recovered, digested, and then analyzed for mercury using cold-vapor atomic absorption (CVAAS) or flourescence spectroscopy (CVAFS). The scope of the method applies to determination of elemental, oxidized, particle-bound and total mercury emissions from coal-fired stationary sources with concentrations ranging from approximately .05 to 100 ug/dscm. The sample train is similar to EPA Method 5.

ONTARIO-hYdRO – METhOd (ASTM d6784-02) MERCURY

Schematic of Ontario-hydro Method Sampling Train


SB-4 Impinger Box / Insulated Coolant Reservoir Model 150, Holds 8 Impingers


BS28WS #28 Ball Joint Clamp (Generic), Stainless Steel

NBT-1/2 Nozzle Brush, 1/2 inch diameter, PTFE Bristles

PBX-10T 10 foot Flexible PTFE Probe Brush Extension, Brush not Included

PBT-5/8 PTFE Probe Brush Tip (PTFE Barrel AND PTFE Bristles), 5/8 inch Bristle Diameter

GN-9A Greenburg-Smith Impinger (with orifice), Unground

GN-9AO Impinger Assembly, Stem with Orifice & Plate, 500ml, Unground O-Ring Joints, Greenburg-Smith

GN-11 U-Tube, #28 Unground Sockets

GF-3Q 3” Quartz Fiber Filters, 25/Box

Ontario-hydro Recommended Accessories

Ontario-hydro - Mercury Sampling Train

47


www.apexinst.com 800-882-3214 / 919-557-7300

Method 201A applies to the in-stack measurement of particulate matter (PM) emissions equal to or less than an aerodynamic diameter of nominally 10 microns (PM10) and or 2.5 microns from stationary sources. A gas sample is extracted at a constant flow rate through Apex instruments cyclone, which separates PM greater than PM10.. PM .less than PM10 is collected on the in-line filter. In order to maintain a cut size of 10 microns in the cyclone, the flow rate must be maintained at a constant, discrete value during the run. Apex cyclones meets the specifications of Method 201A and allows use of the equations in Method 201A to calculate the constant sample flow rate.

pm2-k

PARTICLE SIZING - PROPOSEd MOdIFICATION METhOd 201A

Packing List

Introducing PM1 CycloneApex Instruments now offers a cyclone designed for sampling very fine particulate matter in the 1.5 to 0.5 micron range. The cyclone is based on the cyclone “V” from the Multi-stage cyclone system designed and calibrated by Southern Research Institute under contract for the EPA. The design has been modified to accept the nozzles from the PM 2.5 cyclone, which has been expanded to a set of 12 different size nozzles. The sample flow rate must be maintained, in which the constant rate determines the actual “D50” cut-point. The cyclone is followed by a 47 mm filter assembly. Quartz or PTFE coated glass fiber filters should be used to minimize reactivity with the flue gas. The cyclone and nozzles are constructed from grade 316 stainless steel with Viton o-rings. Other materials are available upon request for corrosive or high temperature applications.

pm1-k

Product Size

PM2-N1 .125 Size 1

PM2-N2 .138 Size 2

PM2-N3 .156 Size 3

Apex Expanded Nozzle SetPM2-NS Nozzle Set Includes 1 Each

Product Size

PM2-N7 .216 Size 7

PM2-N8 .234 Size 8

PM2-N9 .253 Size 9

Product Size

PM2-N4 .172 Size 4

PM2-N5 .188 Size 5

PM2-N6 .200 Size 6

PM2-NS Nozzle Set Includes 1 Each

Product Size

PM2-N10 .274 Size 10

PM2-N11 .296 Size 11

PM2-N12 .320 Size 12

PM1 Cyclone Kit ComponentsThe PM1 Cyclone is used for in-stack measurement of very fine particulate matter. The 47 mm filter assembly outlet connector has a 5/8” outer diameter for easy installation Method 5 Probe Assemblies. The cyclone kit is enclosed in a sturdy plastic case.

Product description

PM1-K PM1 Cyclone Set Includes: Cyclone Body, 12 Nozzles, (PM2-NS), Filter (SFA-47), Manual and Case

PM1 PM1 Cyclone Body Only, Stainless Steel with Viton® O-Rings

PM2-NS Set of 12 Nozzles for PM1 and/or PM2.5 Cyclone, Stainless Steel

Packing List

Product description

PM2-K PM2.5 Cyclone Set Includes: Cyclone Body, 12 Nozzles, (PM2-NS), Filter (SFA-47), Manual and Case

PM2 PM2.5 Cyclone Body Only, Stainless Steel with Viton® O-Rings

PM2-NS Set of 12 Nozzles for PM2.5 Cyclone, Stainless Steel

PM2-NSA Add-On Set of 6 Nozzles (NS-7, 8, 9, 10, 11, 12) for upgrading PM2.5 Cyclone Existing Kits, Stainless Steel

O-024V Viton® O-Ring for PM2.5 Cyclone, (2 per cyclone).

O-024H High Temperature O-Ring for PM2.5 Cyclone, Stainless Steel

MPT-6-181 Pitot Tip, 3/8” Tube, Stainless Steel Replacement for Standard Method 5 Probe Assemblies

PM2.5 Cyclone Kit Components

PM2.5 Cyclone KitThe PM2.5 Cyclone is used for in-stack measurement of particulate matter equal to or less than 2.5 microns. The shank has a 5/8” outer diameter for easy adaptation to the Method 5 Probe Assemblies. The kit is enclosed in a sturdy plastic case with 12 nozzles.

Alloy 600 Components Available. Call for Pricing.

48


800-882-3214 / 919-557-7300 www.apexinst.com

PM10 Cyclone KitPM10 is used for Method 201A testing and is designed for in-stack measurement of particulate matter equal to or less than 10 microns. The shank has a 5/8” outer diameter for easy adaptation to Method 5 Probe Assemblies. The cyclone kit is enclosed in a sturdy plastic case with twelve nozzles. Call for High Temperature Alloy 600 PM10 Cyclones and Filter Holders.

pm10-k

Product description

PM10-K PM10-K Cyclone Kit, Includes: Cyclone, 12 Nozzles Set (PM10-NS), 47mm Filter Holder (SFA-47), Manual & Case

PM10 PM10 Cyclone Only, Stainless Steel with Viton® O-Rings

PM10-NS Set of 12 Nozzles for PM10 Cyclone (Now with 12 Nozzles)

O-032V Viton® O-Ring for PM10 Cyclone

O-032H High Temperature Stainless Steel O-Ring for PM10, Cyclone

MPT-6-320 Extended Pitot Tip for PM10, SFA-300, and SFA-2590

PM10 Cyclone Kit Components

PM10/2.5 Cyclone KitPM10/PM2.5 Set combines the in-stack measurement of particulate matter (PM) equal to or less than an aerodynamic diameter of nominally 10 (PM10) and 2.5 (PM2.5 ) microns from stationary sources. The sampling train and operation are identical to Method 201A except that the PM2.5 cyclone is inserted between the PM10 cyclone and the 47mm filter. The PM10 cyclone collects particulate matter greater than PM10 while the PM2.5 collects PM less than PM10 and greater than PM2.5. The in-line filter collects PM less than PM2.5.

pm2.5-10k

Packing List

Product description

PM2.5-10K PM 2.5/10 Cyclone Kit Includes: PM10 Kit, with PM10/PM2.5 Nozzle, Cyclone Assembly, 47 mm Filter Assembly, Stainless Steel, Adapters, Pitot & Case

PM2/10-CK Connector Kit includes: GA-110 Strain Relief Adapter for PM2.5 and PM10 Cyclones, NSB-16 Button Hook Adapter for connecting the PM10/2.5 Cyclones, 10MSC5-S Connector, adapts NSB-16 to PM2.5 Cyclone, 5/8” TU to 5/16” bevel seat, Stainless Steel, and N-10UBNN SS Union, 5/8”, Bored out .660 with shoulder, Body only, No Nuts or Ferrules

PM2/10-CKI Connector Kit includes: INCONEL EQUIVALENT TO: GA-110 Strain Relief Adapter for PM2.5 and PM10 Cyclones, NSB-16 Button Hook Adapter for connecting the PM10/2.5 Cyclones, 10MSC5-S Connec-tor, adapts NSB-16 to PM2.5 Cyclone, 5/8” TU to 5/16” bevel seat, and N-10UBNN Union, 5/8”, Bored out .660 with shoulder, Body only, No Nuts or Ferrules

SFA-47 Filter Assembly, 47mm, 5/8TU, Stainless Steel, Method 17 In-Stack Filter Unit, 5/8 inch Tube Unions, uses 47mm diameter Filter Element

GA-110 Strain Relief Adapter for PM2.5 and PM10 Cyclones

NSB-16 Button Hook Adapter for Connecting the PM10/2.5 Cyclones

10MSC5-S PM10/2.5 Connector, Adapts NSB-16 to PM2.5 Cyclone,5/8” TU to 5/16” Bevel Seat, Stainless Steel

PM10/2.5 Cyclone Kit Components

PM10/2.5 Cyclone 12 Nozzle Set - 1 Each

Product Size

PM10-N6 .215 Size 6

PM10-N7 .233 Size 7

PM10-N9 .300 Size 9

Product Size

PM10-N3 .164 Size 3

PM10-N4 .180 Size 4

PM10-N5 .197 Size 5

Product Size

PM10-N10 .342 Size 10

PM10-N11 .390 Size 11

PM10-N12 .320 Size 12

Product Size

PM10-N0 .125 Size 0

PM10-N1 .136 Size 1

PM10-N2 .150 Size 2

Recommended Accessories for Sampling with Cyclone Sets.Power Box Adapter, Includes 1/2 inch Mounting Clamp and 4 Pin Amphenol to 3 Receptacles.ua-3J

Extended Pitot Tip for PM10/2.5 Sampling, Tube Diameter 3/8”, Length 421 mmmpt-6-421

47mm Glass Fiber Filters, 100/box (Whatman 934AH-4.7cm).gF-47

Sample Frame with Probe Clamp & Impinger Box SlidessB-8

49


www.apexinst.com 800-882-3214 / 919-557-7300

CI-700K Cascade Impactor Kit includes 7 stage impactor, a PRA-K pre-cutter, nozzles, interconnecting tube, glass fiber filters (45 mm, 47 mm and GFDN filters) and foil collection plate.

Ci-700-k Stainless Steel Pre-Collector

Price description

PRA-K Pre-Cutter Assembly Kit, Includes Body, Cap, Outlet Cap with Union, Nuts, Ferrulesand Set of 6 Nozzles

PRA-N4 1/8”

PRA-N6 3/16”

PRA-N8 1/4”

PRA-N10 5/16”

PRA-N12 3/8”

PRA-N16 1/2”

PRA-NS Set of 6 Pre-Collector Nozzles, Sizes 4-16

Cascade Impactor 7 Stage 47 mm filter outlet, Viton® O-Rings, Foil collection plates.

Ci-700

Set of 7 Lightweight Stainless Steel Foil Collection Plate Inserts.

Ci-Fp

CASCAdE IMPACTOR KIT

CI-700

PRA-K

CI-700-K

data Reduction Software

Product description

PM-2.5-10C Particle Sizing Software for PM2.5 and PM10 Cyclones

PARTICLE SIZING dATA REdUCTION SOFTWARE

Functions• Calculates each stage’s aerodynamic cut point and DP50, needed to reduce particle size data. • Calculates and Stores ancillary data, such as dry gas composition and moisture content. • Reduces velocity traverse data. • Aids in selection of sample flow rates and ideal nozzle size. • Calculates flow rates and dwell times required for PM10 and PM2.5 sampling traverses. • Calculates fractional efficiencies of control devices from samples obtained at inlets and outlets.

WINCIdRS

Windows-based Cascade Impactor Data Reduction System (WINCIDRS) calculates particle size distribution of stack particulate matter (PM) taken with the Cascade Impactor, as well as particle-sizing cyclones. Developed by stack particle analysis experts, this software reduces the time and chances of error involved with reducing particle sizing data. (The PM10/2.5 Software Program (PM-2.5-10C) is extracted from WinCIDRS and simplified for use only with PM10 and PM2.5 cyclones. The calculations are similar to the WinCIDRS, scaled-down specifically for cyclone data reduction. The calculations are intensive enough to demand computer software.)

50


800-882-3214 / 919-557-7300 www.apexinst.com

This isokinetic method is used to measure Condensable Particulate Matter (CPM) from stationary source emissions after particulate matter has been removed by a heated filter, such as in Method 5, 17 or 201A. The CPM is collected in dry impingers. The impinger contents are purged with nitrogen (N2) immediately after sample collection to remove dissolved sulfur dioxide (SO2) gases from the impinger. The organic and aqueous fractions are dried and the residues are weighed. The total of the aqueous and organic fractions represents the CPM.

METhOd 202 (dRY IMPINGER METhOd)

Schematic of the M202 Sampling Train

Method 202 Sampling Train

Components ListGNFA-3U-18K 3” filter assembly, ungrounded glass with 90 degree inlet and outlet, open style alum clamp. With rubberized silicone filter support.

GN-9AKSAKnock-out impinger assembly,ungrounded (for HorizMM5).Includes: GN-9AKSB (Bottle), GN-9AKS-I (Short Stem),GN-9AKS-IL (Purge Stem).

GF-3TM 3” PTFE membrane filter - 50 per box(Palifex 90mm).

GN-VChM-M202M202 Spiral Condenser, #28 Ball and Socket. Water Jacket Hose Barbs, High Moisture sources above 15%.

MM5-PM Mini submersible coolant pump, 110V.

MM5-PSubmersible coolant pump, 110V.

SB-4SdImpinger box - insulated coolant reservoir model 150, holds 8 impingers.

GA-28S4Stainless steel adapter, 28mm socket to 1/4” FNPT, 3” long 400°F rating.

SFA-116ILStainless steel filter housing in-line 1/4” FNPT, 3” long 400°F rating. Size: 1 Micron. Other sizes available.

SFA-1101T316L mesh stainless steel elements are recommended for filtration of heavily contaminated gases, liquids, polymers, and steam. Temperature range of -65° F to 1000°F. Withstands 1000 PSIG differential.

FILTER ANd PURGE AdAPTERFilter System for Purging Method 202.

Call for more details.

A

PurgeStem

GN-VCHM-M202

GN-8

See Page 45 for PM10-2.5 Configurations

See Page 40 for Available Pumps

See Page 28 for Full-Part Assembly Break-Down

For KnockoutGN-9AKSA

METhOd 202 (CONTINUEd ON NEXT PAGE)

GN-9AKSB (Bottle)GN-9AKS-I ( Short Stem)GN-9AKS-IL (Purge Stem)Can be Sold Separately

GN-9AKSB

GN-9AKS-IL

GN-9AKS-I

51


www.apexinst.com 800-882-3214 / 919-557-7300

PP907-049

NTG-10UNN

Quantity Product description1 SB-4SD Two Section Divided Impinger Box

1 GN-VCHM-M202 Vertical Condenser #28 Socket to M202 Spiral Condenser, #28 Socket both ends Water Jacket Hose Barbs, High Moisture Source above 15%.

1 GN-9AKSA Glass Knock-out Impinger Assembly, Unground, (for HorizMM5) included with Long / Short Stem

1 GNFA-3U-18K CPM 3” Filter Assembly including Flexable TC

1 GF-3TM TPFE Membrane Filters with Support, 1 Micron Pore Size, 50/Box

1 MM5-P MM5-P Submersible Coolant Pump, 110V

1 MM5-PM Mini Submersible Coolant Pump, 110V

1 SB-8 Sample Frame with Probe Clamp

1 SFA-116IL Stainless Steel Filter Assembly, 3” L In-Line

2 SFA-1101T Stainless Steel FIlter Element

1 GA-28S4 #28 Socket Bored Purge Adapter

1 GN-9AKA Knock-out impinger assembly, ungrounded (for HorizMM5). Includes: GN-9AKSB (Bottle), GN-9AKS-I (Short Stem), GN-9AKS-IL (Purge Stem).

METhOd 202 SAMPLING ACCESSORIES

METhOd 202 PURGE ACCESSORIES

hEXAVALENT ChROMIUM PFA IMPINGER TRAINS & ACCESSORIES

sk-0061h sk-0061h-V

Method 0061 Hexavalent Chromium Emissions from Stationary Sources determines hexavalent chromium emissions from hazardous waste incinerators, municipal waste incinerators, municipal waste combustors and sewage sludge incinerators. Isokinetically collected with a train where the impinger reagent is recirculated continuously. Samples are analyzed with an ion chromatograph. Method 0061H Hexavalent Chromium High Temperature Source Sampling Kit is used as an alternative for temperatures above 150°C (300° F). Option “V” is added for 240 V.

Schematic of Method 0061h Sampling Train

FILTER ANd PURGE AdAPTERFilter System for Purging Method 202.

Call for more details.

hexavalent Chromium Method 0061 high or Low Temperature Source Sampling Kit

• 4’ Stainless Steel Probe Assembly (Not Heated)• Glass Probe Liners (2)• Glass Nozzle Set• PTFE Impingers

• 30’ Split Umbilical • Impinger Box• Peristalic Pump• PTFE Membrane• Sample Frame

52


800-882-3214 / 919-557-7300 www.apexinst.com

Apex Instruments offers a wide range of filter media to meet any sampling requirements. Listed below are the standard media and sizes that Apex Instruments normally stock. Additional materials and sizes are available upon request.

FILTER MEdIA

QUARTZ FIBER FILTERSQuartz Fiber Filters are manufactured from pure quartz with-out a binder and are frequently used for sampling for metals analyses and acidic gases.

Model descriptionGF-2Q 2 inch Quartz Fiber Filters-25/box

GF-25Q 25mm Quartz Fiber Filters-100/box


GF-4Q 4 inch Quartz Fiber Filters-25/box (Pallflex 11 cm)

GF-45Q 45mm Quartz Fiber Filter-100/box


GF-54Q 54mm Quartz Fiber Filters-25/box (Pallflex 54mm)

GF-63Q 63.5mm Quartz Fiber Filters-25/box (Pallflex 63.5mm)



GF-47QR 47mm Quartz Fiber Filters-100/box (MFS QR100 47mm)


GLASS FIBER FILTERSGlass Fiber Filters are most commonly used filters for particulate sampling. All of the glass fiber filters are binder free and exhibit at least 99.9% efficiency for 0.3 micron dioctyl phthalate (DOP) smoke particles. Not recommended for metals analysis.

Grade E FIBER FILTERSIdeally suited for suspended solids analysis and high volume air monitoring applications. Softening point of glass fiber is 500°C, therefore upper limit temperature in use is 475°C. Low fiber shedding improves quality assurance of test results. high loading capacity. This media meets requirements for standard method 2540D and EPA Method 160.2 for establishing water quality in suspended solids content.

Model descriptionGF-2 2 inch Glass Fiber Filters-100/box

(934AH-5.5cm)

GF-2X6.5 2x6.5 inch Glass Fiber Filters-100/box (934AH)

GF-3 3 inch Glass Fiber Filters-100/box (934AH-8.26cm)

GF-4 4 inch Glass Fiber Filters-100/box (934-AH-11cm)

GF-45 45mm Glass Fiber Filters-100/box (934-AH-45mm)

GF-47 47mm Glass Fiber Filters-100/box(934AH-4.7cm)

GF-63 63.5mm Glass Fiber Filters-100/box (934-AH-63.5mm)

GF-90 90mm Glass Fiber Filters-100/Box (934AH-9.0cm)

GF-2E 2 inch Glass Fiber Filters-100/box Grade E



GF-25E 25mm Glass Fiber Filters-100/box Grade E


GLASS FIBER FILTERS

53


www.apexinst.com 800-882-3214 / 919-557-7300

ALUNDUM® THIMBLES (CERAMIC)Alundum® Thimbles are used for in-stack filtration for process engineering studies when a large sample is needed for analyses. These thimbles are made from fused alumina oxide and remain very constant in weight and can be re-used an infinite number of times. There are two different porosity thimbles that can be used in the SFA-300 thimble holder. The medium porosity retain particles 5 micron and larger and the coarse retain particles 20 micron and larger.

PTFE COATED GLASS FIBER FILTERS PTFE Coated Glass Fiber Filters are constructed from borosilicate microfibers and bonded with PTFE. The filters can be folded & handled without loss of fibers. Great for especially low loading rates. Specifically recommended for Method 26 & PM10 sampling.

Product descriptionGF-2T 2 inch PTFE Coated Glass

Fiber Filters-100/box

GF-3T 3 inch PTFE Coated Glass Fiber Filters-100/box (Pallflex 82.6mm)

GF-4T 4 inch PTFE Coated Glass Fiber Filters-100/box (Pallflex 11cm)

GF-25T 25mm PTFE Coated Glass Fiber Filters-100/box (Pallflex 2.5 cm)

GF-47T 47mm PTFE Coated Glass Fiber Filters-100/box (Pallflex 4.7cm)

GF-90T 90mm PTFE Coated Glass Fiber Filters-100/box (Pallflex 90mm)

PTFE FILTER MEMBRANESPTFE Filter Membranes are produced of pure PTFE resins. They withstand the most severely corrosive conditions at temperatures as high as 500°F (260°C) and down to the cryogenic range. The membrane is hydrophobic and maintains its strength wet or dry.

Model descriptionTF1121 PTFE Membrane, 47mm,

0.45 Micron (10/pack)

TF1131 PTFE Membrane, 47mm, 1-2 Micron (10/pack)


PTFE FILTER MEMBRANES

Product descriptionGF-3TPG 3 inch PTFE Coated Glass Fiber Filters-50/box (MFS

PG60) 82mm-Hydrophobic, Low absorption of acid gases such as SOX or NOX.

GF-4TPG 4" PTFE Coated Glass Fiber Filters-50/box (MFS PG60) 110mm-Hydrophobic, Low absorption of acid gases such as SOX or NOX.

GF-25TPG 25mm PTFE Coated Glass Fiber Filters-100/box (MFS PG60) 25mm-Hydrophobic, Low absorption of acid gases such as SOX or NOX.


Model descriptionGF-300C Alundum Thimble, medium porosity, 5+ micron retention, 34x100ml,

round bottom, fits SFA-300 use with additional O-ring, O-123V.

GF-300C-C Alundum Thimble, COARSE porosity, 20 micron retention, 34x100ml, round bottom, fits SFA-300 use with additional O-ring, O-123V.

GF-300C

IN-STACK THIMBLES AND ACCESSORIES Apex Instruments stocks a variety of Fiber Thimbles for in-stack particulate sampling. The thimbles are seam-less, high purity filters and available from a choice of two different types of fibers: Borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid washed to reduce the trace metal content to an absolute minimum. Quartz fiber thimbles are strengthened with alumina and are prefired at 900°C for 2 hours during manufacturing to stabilize the weight prior to use. The gas collection efficiency of the thimbles is 99.9% (0.3 micron DOP). The 25 x 90mm thimbles are specifically manufactured for stack sampling and tapered for ease in loading. Cellulose thimbles are available upon request.

GF-2590Q

Model descriptionTF1165 PTFE Membrane, 25mm, 30-60 Micron (10/Pack)

GF-3TM 3 inch PTFE Membrane Filters-50/box (82.6mm) PTFE filter media provides durability for hostile acid aerosol monitoring. 1.0µm pore size membrane.


Model descriptionGF-190Q 19X90mm Quartz Fiber Filter

Thimble-25/box (For SFA-190)

GF-300Q 30x100mm Quartz Fiber Filter Thimble-25/box (For SFA-300) grade 88R

GF-2590Q 25x90mm Tapered Quartz Fiber Thimble-10/box (For SFA-2590) Grade 88R

QUARTZ FIBER THIMBLESModel descriptionGF-190 19x90mm Glass Fiber Filter


GF-2590 25x90mm Tapered Glass Fiber Thimble -10/box (For SFA-2590) Grade 86R

GF-300 30x100mm Glass Fiber Filter Thimble-25/box (For SFA-300) Grade 86R

GLASS FIBER FILTER THIMBLES

ACETATE FILTERGF-47MMAT - FILTER, ACETATE, 47MM,.45 PORE, 100/PK. This filter is used in the SK-0061H system for sampling Hexavalent Chromium.

54


800-882-3214 / 919-557-7300 www.apexinst.com

PTFE Probe Brush Extensions The flexible PTFE Probe Brush Extension attaches to the PBT-5/8 or PB-5/8. Made with 8/32 threads with a phenolic knob. Please specify length.

PTFE Probe BrushAll PTFE construction. The PBT-5/8” diameter with four spiral rows of black PTFE bristles. Over all length is 2”. The shaft is 1/4” diameter with 8-32 female threads. PTFE Barrel and PTFE Bristles.PBT-5/8

SAMPLE RECOVERY

PBT-5/8

NB-SET

B-3

B-4

PBX-S

Modular Probe Brush Set The PBX-S Modular Probe Brush Set contains two of the 5/8” stainless steel twisted wire brushes with nylon bristles and a total of 13’ in stainless steel extensions.PBX-S....$105.00

Model description

PB- 5/8 Probe Brush/Stainless Steel, Nylon Bristles

PBX-2 2’ Probe Brush Extension, Stainless Steel


PBK-832 Probe Brush Knob

NOZZLE BRUSh SET The NB-SET Nozzle Brush Set includes one each of the three most popular sizes in a convenient carrying tube. (#3,#5,#8)NB-SET

B-1

Impinger Bottle Brush with Plastic Handle and Nylon Bristles.B-1

Impinger Bottle Brush

B-2

Flask Brush, Stainless Steel Handle and Nylon Bristles.B-2

Flask Brush

Filter Brush, 3/16” diameter, Stainless Steel Handle and Nylon Bristles, 5/16”.B-3

Filter Recovery Brush

Rubber Policeman with 18” Delrin® HandleB-4

Policeman

Model description

PBX-4T 4” PTFE ProbeBrush Extension

PBX-6T 6” PTFE Probe Brush Extension




Brush Sold Separately

PTFE NOZZLE BRUShES Nozzle Brush NBT-1/2 is constructed of pure PTFE featuring a 1/8” diameter shaft with 1/2” long soft PTFE bristles. NBT-1/2

NBT-1/2

PBX- T

NOZZLE BRUShES Apex Instruments Nozzle Brushes feature stainless steel handle and nylon bristles. Super flexible for cleaning button hook nozzles with eye tip to reduce scarring of the nozzle.

Model description

NB-3 3/16” diameter, Nylon Bristles



NB-5

NB-8NB-3

55


www.apexinst.com 800-882-3214 / 919-557-7300

250ML-CyL-PMP

Aluminum Weighing dishes (70 ml)100/pack.25433-062

Aluminum Weighing dishes 100 Pack (12.1 cm) 12175-001

Petri dish 100x15mm PL 25/pack (for 3-inch filters), Polystyrene.25373-1100

Petri dish 150x15mm PL 10/pack (for 4-inch filters), Polystyrene.25373-187

Graduated Cylinder 250ml, Plastic250ML-CYL-PMP

Graduated Cylinder 250ml, Glass250ML-CYL

TW-1

Nylon TweezersTW-1

Polypropylene FunnelTop Diameter 108mm.

30255

Funnel Parafilm M, Laboratory Sealing Film, Roll is 2” x 250 ft.PARA-2X250

Synthetic Cotton Balls (For Impinger Outlet Filter), 300/bagMS-1

Cotton Balls

SAMPLE RECOVERY BOTTLES

FEP WASh BOTTLE500mL Wash Bottles, FEP.WB-500Fep

WB-500FEP

GSB-250

GLASS BOTTLES250mL Glass Sample Bottles with PFA-Lined Lid.Case of 12.gsB-250

SAMPLE RECOVERY ACCESSORIES

WB-5P

PLASTIC WASh BOTTLE500mL Plastic Wash BottlesWB-5p

POLYEThYLENE SAMPLE BOTTLES

Wide Mouth Bottles for Easy Filling and Pouring. The HDPE bottle with polypropylene closures are made of FDA compliant material. Recycling code molded into base of bottles. Simple to pour-wide mouth bottles. Chemically resistant. Leak proof, firm. Excellent for packaging chemicals, pharmaceuticals and adhesives.

WB-1W - 125 mL vw/Wide Mouth, w/Cap.

WB-2p - 250 mL w/Cap.

WB-2pW - 250 mL w/Wide Mouth.

WB-4p - 16oz./500 mL w/Wide Mouth.

WB-10p - 1000 mL w/Wide Mouth.


56


800-882-3214 / 919-557-7300 www.apexinst.com

dESICCATOR ANd dESICCANTS Acrylic Desiccator Cabinets feature adjustable shelves with grooves for positioning, removeable lip tray, gasketed door, built-in hygrometer. Cabinets do not include Desiccant, order separately.

31000

www.belart.com

Features• Patented Sealed Construction is Airtight, Dust and Moisture Free.• Portable and Stackable with a Small Footprint.

PORTABLE dESI-VAC CONTAINER Desiccator with a vacuum pump is ideal for drying, preserving, storing, and even shipping samples. Vacuum pump built into the top removes air with manual strokes. Rubber O-ring sealed cover maintains vacuum. Achieves a vacuum of better than 200 inches of water (15 inches of mercury). A release button on top allows air into the container to remove the lid. Sample Humidity Sponges™ desiccant drying packets are included. O-ring-sealed cover maintains vacuum. Achieves a vacuum of better than 200 inches of water (15 inches of mercury A release button on top allows air into the container to remove the lid. Keep powder dry. Plastic container is ideal for storing chemicals, powders, tissues, plant sections, electronics, and weighing samples. Vacuum and desiccants keep mate-rial dry. Supplied with a vacuum indicating button that confirms interior vacuum and a dial hygrometer that displays 0 to 100% relative humidity with a resolution of 2%RH.Dimensions: HxWxD: 11” x 9” x 10”.

des-3164dES-3164

• Embedded UV Protection and Superior Chemical Resistance.• Built-in Hygrometer for Quick Check on RH Levels.• Rugged Construction with Sturdy Latches and Lock Provisions.

Model description dimensions Features

DES-10000 Desiccator Cabinet 8.4” x 13.4” x 16.3” Gasketed door, built in hygrometer, 0.75 cu.ft.

DES-21000 Desiccator Cabinet 12.4” x 13.4” x 16.3”, Gasketed door, 2 shelves, built in hygrometer 1.17 cu.ft.

DES-21115 Auto-Desiccator Cabinet

12.4” x 13.4” x 16.3” Gasketed door, 2 shelves, built in hygrometer 1.17 cu.ft. 110V

DES-21115V Auto-Desiccator Cabinet

12.4” x 13.4” x 16.3”, Gasketed door, 2 shelves, built in hygrometer 220V fan, 1.17 cu.ft.

DES-31000 Desiccator Cabinet 16.4” x 13.4” x 16.3”, Gasketed door, 3 shelves, built in hygrometer stackable


16.4” x 13.4” x 16.3”, Gasketed door, 3 shelves, built in hygrometer stackable, 110V


16.4” x 13.4” x 16.3”, Gasketed door, 3 shelves, built in hygrometer 220V fan

DES-40000 Desiccator Cabinet 13.4” x 20.4” x 16.3”, Gasketed door, 2 shelves, horizontal Profile


20.4” x 13.4” x 16.3” Gasketed door, 3 shelves, built in hygrometer


20.4” x 13.4” x 16.3”, Gasketed door, 3 shelves, built in hygrometer, 220V fan

57


www.apexinst.com 800-882-3214 / 919-557-7300

SILICA GELBlue Indicating, 3-5mm Bead, 12/case, 250 ml per bottle.

sg-kitSG-KIT

Apex Instruments Silica Gel is primarily used for drying sample gas prior to measurement and can absorb moisture 40% of its weight. The silica gel can be regenerated by drying in an oven and used over and over again.

SILICA GEL

SILICA GEL3-5mm Bead, Indicating, 2.3Kg.

sg-3/5B

24005 14005

Part Number description

13005 DRIERITE®, Nonindicating 8 Mesh, 5 Lbs. (2.3 kg)

14005 DRIERITE®, Nonindicating 10-20 Mesh, 5 Lbs. (2.3 kg)

23005 DRIERITE®, Indicating 8 Mesh, 5 Lbs. (2.3 kg)

24005 DRIERITE®, Indicating 10-20 Mesh, 5 Lbs. (2.3 kg)

SG-3/5B

The activated alumina is primarily used for air drying at low temperature applications, 5.5 lb. Container.

80% Activated Alumina (White). 1/8” Diameter Beads.

20% Silica Gel (Blue) 3-5 mm Beads.

Aluma-Sorb

ACTIVATEd ALUMINA WITh SILICA GEL

Aluma-sorb

SILICA GEL3-5 mm Bead, Bulk55 LBS, CONTAINER.

sg-3/5B-55

Ah-610-A

dRIERITE® dESICCANTSApex Instruments carries both non indicating and indicating DRIERITE®. (anhydrous calcium sulfate) Economical to use, it can be regenerated repeatedly. The indicating DRIERITE® is impregnated with cobalt chloride: blue when dry and changes to pink upon absorption of moisture.

SG-3/5B-55

With Aluma-Sorb AH-610-A

ah-610-Ca-6tu

ah-610-CaCr-4tu

SG-616-25LB

SILICA GELSG-616 - IndicatingSG-616N - Non Indicating

58


800-882-3214 / 919-557-7300 www.apexinst.com

BALANCES

MOdEL dESCRIPTION

BAL-EJ1500 1500g x 0.1 g.

BAL-EJ3000 3100g x 0.1 g.

BAL-EJ6100 6100g x 0.1 g.

BAL-EJ02 USB Interface with Cable

BAL-EJ12 Carrying Case

EJ-SERIES• Easy to read LCD Display with Backlight

• Percentage and Counting

• USB or RS-232 Interface Optional

• Battery Operated (4 x AA not included)

• AC Adapter Included

• Pan Size: 5” x 5.5”

• Check-Weighing Capacity

• 5 Year Warranty

PORTABLE BALANCES

MOdEL dESCRIPTION WEIGhT

BAL-W1000ASTM Weight for Electronic Balance. 1 kg. ASTM GRADE 7

BAL-W2000ASTM Weight for Electronic Balance. 2 kg. ASTM SHAPE

BAL-W5000ASTM Weight for Electronic Balance. 5 kg. Class F, meet Tolerances of NIST

CALIBRATION WEIGhTS

COMES wiTh CERTiFiCATE OF CONFORMANCE

59


www.apexinst.com 800-882-3214 / 919-557-7300

BALANCES

MOdEL dESCRIPTION PAN SIZE

BAL-HR60-C 60g x 0.1mg with RS-232C. 3.3”



BAL-HR202i 220g/51g x 0.1mg/0.01mg Semi-Micro with R-232C. 3.6”

hR-SERIES• Percentage and Counting Modes.

• Digital Preset Tare.

• One Touch Printing.

• Last Digital Suppression.

• Standard Underhook.

• Optional Rechargeable Battery Pack.

• GLP/LIMS/ISO Compliant.

• RS-232C Standard.

• 5 Year Warranty.

ANALYTICAL BALANCES

Analytical Balances - Calibration Weight Set

MOdEL

BAL-W1-100

dESCRIPTIONWeight Set - 1mg-100gStainless Steel Calibration Weight Set for Lab Use. Set of 9 Weights Plus Fractional Weights in Wooden Storage Box.

Note: Please check with State Department of Weights and Measurements for calibrations.

60


800-882-3214 / 919-557-7300 www.apexinst.com

dGM-110SR

METER CALIBRATIONCALIBRATION SERVICESApex performs both calibrations using a wet test meter and bell-prover primary standard. Calibration services are available from Apex Instruments on a fee per console basis. Extra charge for low flow. All console and dry gas meter calibrations are conducted in accordance with U.S. EPA standards. Apex Instruments calibrates source sampler consoles, reference dry gas meters, orifices and pitots.

Calibration being performed with Wet Test Meter

dRY GAS SECONdARY REFERENCE METER (ENGLISh) Dry Gas Meter Secondary Reference Meter (Standard) with 15 pt cal, valve, 5’ hose, 1/2” Quick Connect. Used for calibrating Method 5 Source Sampler Consoles. dgm-110sr

dRY GAS METER KG3S W/ REPLACEMENT KIT FOR SK25 dGM IN XC-572 Replacement Kit for KG3S to replace SK25 DGM in an existing model XC-572 meter console. Includes KG3S DGM with nuts and o-rings, adapter plate, support bracket, bushings, standoffs and screws.

dgm-kg3skkit

METER CALIBRATION EQUIPMENT

Model description

DGR-CAL15-LF Calibration of DGM for Secondary Reference, 15 Point, Low Flow 900, 750, 600, 450, 300 ccm (3 runs at each flow rate).

DGR-CU-ST Calibration of DGM for Secondary Reference, 15 Point 1.2, 1.0, 0.5, .035 cfm (35, 30, 21, 15, 11 lpm).

DGR-2VER Verification of DGM for Secondary Reference, 2 Point Verification of Previous Calibration.

DGMC-5A Pre-Test 5 Point Calibration for Compatible Meter Consoles.

DGMC-5A-LF Pre-Test 5 Point Low-Flow (less than 1Lpm) Calibration for Apex Meter Consoles Service only - 900, 750, 600, 450, 300 ccm.

DGMC-5AD-LF Pre-Test 5 Point Low-Flow (less than 1Lpm) Calibration for Apex Meter Consoles (Dual)Service only - 900, 750, 600, 450, 300 ccm.

DGMC-3A Post Test 3 Point Calibration for Meter Consoles.

DGMC-3A-LF Pre-Test 3 Point Low-Flow (less than 1Lpm) Calibration for Apex Meter Console. 900, 600, 300 ccm.

DGMC-3AD-LF Flow Post-test 3 Point Low-Flow (less than 1Lpm) Calibration for Apex Dual Meter Consoles. 300, 400 & 500ccm. 900, 600, 300 ccm.

CAL-ORF Orifice Calibration, 3 Point (priced per orifice assembly).

dRY GAS METER CALIBRATION SERVICES

dGM-KG3SKKITdRY GAS METER KG3S W/ REPLACEMENT KIT FOR AP25 dGM IN XC-572 Replacement Kit for KG3S to replace AP25 DGM in existing model XC-572 meter console. Includes KG3S DGM with nuts and o-rings, adapter plate, bushings, standoffs and screws.

dgm-kg3apkit

The configuration for the replacing the AP25 does not require the support bracket.

dgm-kg2srddgm-kg3srdgm-kg3-srd5k

61


www.apexinst.com 800-882-3214 / 919-557-7300

U.S. EPA allows critical orifices to be used as calibration standards. The orifice calibration set contains five of our critical orifices with 1/2” quick connects and software. Recalibration recommended annually. Calibration Orifice Set, 5 Calibrated Critical Orifices and Spreadsheet Diskette for Method 5.

CALIBRATION ORIFICE SET

m5Co-set

Available on CD

Model A description: Shinagawa Precision Wet Test Meter Weight height Width depth

W-NK-0.5A Max Flow 5 LPM, 0.5 Liter per Revolution 4.5kg 420 290 190

W-NK-1A Max Flow 10 LPM, 1 Liter per Revolution. 6.0kg 450 315 210

W-NK-2A Max Flow 20 LPM, 2 Liter per Revolution 9.0kg 390 350 255

W-NK-2.5A Precision Meter, 2.5 Liter Capacity, 5 to 1500 L/HR 9.0kg 390 350 255

W-NK-5A Precision Meter, 5 Liter Capacity, 5 to 3000 L/HR 25kg 575 455 295

W-NK-10A Precision Meter, 10 Liter Capacity, 20 to 6000 L/HR 35kg 656 535 380

The Best Standard for Calibration of dry Gas Meters.

Different Models Available.

The Model W-NK Wet Gas Meter is a net-volume type integrating flowmeter that employs a drum as the metering element. As the drum is sealed with water or other fluid, the Model W-NK provides the measurement of any gas irrespective of the gas specific gravity and viscosity. Further, since this gas meter permits the measurement of very small flows, exhibits high reproducibility, and offers various other excellent features, it properly serves as a standard as well as a testing instrument.

PRECISION WET TEST METERSCALIBRATION EQUIPMENT ANd SERVICES

Model B description: Shinagawa Precision Wet Test Meter Weight height Width depth

W-NK-0.5B Max Flow 5 LPM, 0.5 Liter per Revolution, Corrosion Resistant 4.5kg 420 290 190

W-NK-1B Max Flow 10 LPM, 1 Liter per Revolution, Corrosion Resistant 6.0kg 450 315 210

W-NK-2B Max Flow 20 LPM, 2 Liter per Revolution, Corrosion Resistant 9.0kg 390 350 255

W-NK-2.5B Precision Meter, 2.5 Liter Capacity, 5 to 3000 L/HR, Corrosion Resistant

9.0kg 390 350 255

W-NK-5B Precision Meter, 5 Liter Capacity, 5 to 3000 L/HR, Corrosion Resistant

25kg 575 455 295

W-NK-10B Precision Meter, 10 Liter Capacity, 20 to 6000 L/HR, Corrosion Resistant

35kg 656 535 380

W-NK

Model description

M5CO-40 Calibration Critical Orifice, Size 40, Flow Rate. ~.31cfm (~8.8 lpm) with 1/2” Male QC

M5CO-48 Calibration Critical Orifice, Size 48, Flow Rate. ~.46cfm (~13.0 lpm) with 1/2” QC

M5CO-55 Calibration Critical Orifice, Size 55, Flow Rate. ~.61cfm (~17.3 lpm) with 1/2” QC.

M5CO-63 Calibration Critical Orifice, Size 63, Flow Rate. ~.79cfm (~22.4 lpm) with 1/2” QC.

M5CO-73 Calibration Critical Orifice, Size 73, Flow Rate. ~1.1cfm (~31.14 lpm) with 1/2” QC.

Orifice Set Contains the following:

62


800-882-3214 / 919-557-7300 www.apexinst.com

dIAL CALIPERS

Geometric of Type-S Pitot Tube to Method 2.

pt-Cal-gWind Tunnel of Type-S Pitot Tube to Method 2.

pt-Cal-W

PITOT CALIBRATION SERVICES

ThERMOCOUPLE SIMULATOR / CALIBRATOR This Thermocouple Simulator/Calibrator has precise temperature inputs to all types of instruments, transmitters, recorders, controllers, alarms, data acquisition and computer systems. Provides 18” extension wire output and is cold junction compensated for changes in ambient temperature. Ac-curate source for checkout and calibration of all thermocouple instruments. Practical Instrument Electronics (PIE) Model 520 Thermocouple Simulator simulates a dedicated standard thermocou-ple curve over the entire industrial temperature range.

m5C-520

dial Calipers are used for measuring nozzle diameter and inspection of pitots. Dial Caliper, 0-6”/ 150mm Direct inch/Metric Conversion.

m5C-3d

NOZZLE CALIBRATION

CALIBRATION EQUIPMENT ANd SERVICES

M5C-520

BULL’S EYE LEVELBull’s Eye Level is 1/2” diameter and used for pitot calibrations. Comes with thumb screws for clamping to pitot.

m5C-2

M5C-2

Pendulum Style Inclinometer for the Calibration of Type-S Pitots.

inC-a300

A300 LEVEL INdICATOR

INC-A300

PITOT AUdIT EQUIPMENT & MANOMETERS

Meriam Handheld, LCD DISPDigital Manometer, Hand held, 0-28 inch H2O Selectable Range, English/Metric, with certificate of NIST traceability.

dhm-m100

hANdhELd MANOMETER

dhM-M100

hANdhELd MANOMETER LCD DISP., Digital Manometer, Method 2, Hand held, 0-10 inch H2O Selectable Range, English/Metric.

dhm-28-10

dhM-28-10

MANOMETER SOFTWARE Software and cable for Digital Manometer, HM28 series.

dhm-28-1

MANOMETER dIGITAL dISPLAYDP-CALC Micromanometer makes differential pressure measurements, static, total, and velocity pressures as well as pressure drops across filters, coils, fans, and diffusers. Differential and static pressure from -15 to +15 in. H2O (-3735 to +3735 Pa) lightweight and durable design with an easy-to-read display, certificate of NIST traceability.

dhm-5825

63


www.apexinst.com 800-882-3214 / 919-557-7300

MONORAILS

MONORAIL hARdwARe

(Threaded pipe flanges are available in 3”, 4” or 6”, stainless steel or aluminum.) Note: The chain must be attached to the stack so that the chain angle to the monorail is no less than 30° (45° is recommended).

PF- CSPipe Flange

PART # Monorail with Cable and Chain LF

P1001-10 MONORAIL, 10FT, STEEL Heavy Duty, Double Channel, W/CHAIN, L-Bracket & Hardware.

10


12

P1001-14 MONORAIL, 14FT, STEEL Heavy Duty, Double Channel, w/ Adjustment Chain, L-Bracket & Hardware.

14

P1001-16 MONORAIL, 16FT, STEEL Heavy Duty, Double Channel, w/Cable, Adjustable Strap, L-Bracket & Hardware.

16


17

P1001-18 MONORAIL, 18FT, STEEL W/CHAIN Heavy Duty, DoubleChannel, w/Cable, Adjustable Strap, L-Bracket & Hardware.

18

PART # Flange

PF-3CS Flange, 3” 150 lb. FF, 2.67 Bored, Stainless Steel, with Threaded Coupling.

PF-4CS Flange, 4” 150 lb. FF, 2.67 Threaded, Stainless Steel, with Threaded Coupling.

PF-6CLS Flange, 6” 150 lb. FF, 2.67 Bored, Stainless Steel with Cam-lock Connector.

See Accessories Section for Different Configurations.

PART # Trolley and Monorail Support Bracket

P2751 MONORAIL, TROLLEY Swivel Frame Trolley with Eyebolt, 1 Foot Chain and Snap-hook.

P501 MONOMOUNT, MONORAIL SUPPORT Support Bracket; Fits 3”, 4”, 6” & 8”, Standard Pipe Flanges, Includes P1354 Hinge, (4) P3010 Nuts and P371 Bolts.

Link to Flanges

LF 6 7 8 9 10 12

Part # P1000-6 P1000-7 P1000-8 P1000-9 P1000-10 P1000-12

Probe Size

For use with probes over 6’






Monorail with ChainHeavy Duty Steel Monorail with Chain, L-Bracket and Hardware (for use with probes).

64


800-882-3214 / 919-557-7300 www.apexinst.com

XC-522 and XC-572 Components ListPart Number Description QC-MAN-M2 QC-Manometer, M-1/4HB, Delrin XC-10U Black RotoRack Shallow Case M-RA911 Switch, Curvette, EC Comp., I-O AM-MCP Replacement Meter Console Wired Amphenol Sub-Assembly M-422B Bracket, Manometer, Adjust, Stainless Steel M-422DS Manometer Displacer Knob L-441160 Latch, Panel, Screw, Large, Sou 3439T12 Webbing, 2”, Black Nylon M-CBR5A-M Magnetic Type Circuit Breaker Rocker Switch, 5 Amp., 120V M-CBR3A-M Magnetic Type Circuit Breaker Rocker Switch, 3 Amp., 240V

Part Number Description TC-765KF Display, TC, PNI, LED, 120/220V M-SD31 Controller, Temp, Red LED, Watlow MC-T Timer, MC, Veeder-Root M-SCKT15A Conn, Pwr, IEC Inlet 15A/250V M-49BK Recept, EL, Snap-In, Term M-31302A Switch, TC. 7 Channel TC-PJK TC Jack, Type K, PNL, Snap-In QC-BHF8-SS QC, Blkhd, 1/2IN-1/2TU, F, SS QC-BHF4-SS QC, Blkhd, 1/4IN-1/4TU, F, SS QC-BHF6-SS QC, Blkhd, 3/8IN-3/8TU, F, SS QC-BHM6-SS QC, Blkhd, 3/8IN-3/8TU, M, SS B2VH-6S Valve, Ball, 3/8TU, SS, PNL, Nut NV3HA-6S Valve, Needle, Angle, 3/8T-3/8T, S DGM-110 Meter, Dry Gas, 110 Rockwell G301U Gage, Vac, 0-30HG, 1.5IN, PNL M-42210 Manometer, Dual, PNL, 0-10” H2 QC-MAN-F3 QC-Manometer, F-1/8MNPT, S

1234567891011121314151617

18192021

22

23242526

27

xc-522 Source Sampling conSole (engliSh) xc-572 Source Sampling conSole (metric)

TC-765KF

Temperature Display

Manometer Quick Connects

Fine Control Valve



Standard Stainless Steel Pitot Quick

Connects

Standard Stainless Steel Sample Quick Connect

Standard StainlessSteel Female Pump Connection (Pressure)

UmbilicalCable Power Connection


7-ChannelTemperature

Selector Switch

Vacuum Gauge

Elapsed Timer



Controllers

Stainless Steel MaleNon-Reversible Pump


Strap

9

10

11

1

7

XC-10U19

13

4

21

ElectricReceptacle

Power Connect Inlet

25 3439T12


24 L-441160

XC-522 Dry English Gas Meter14 DGM-110

CoarseControl Valve

12 B2VH-6S

Dual Column

Manometer

16 M-42210

1718 QC-MAN-M2

QC-MAN-F32 M-SD31

MC-T

G301U

3

15

M-31302A 6

TC-PJK

QC-BHM6-SS

QC-BHF6-SS

5M-49BK

QC-BHF8-SS8

QC-BHF4-SSAM-MCP NV3HA-6S

M-422B22

M-422DS23

Rocker Switches

M-RA91120

M-SCKT15A

xc-522

28 DGM-AP25

XC-572 Dry Metric Gas Meter

XC-572 (Metric) DGM-AP25 Meter, Dry Gas, AP25 W/Union 28

Magnetic Type Circuit Breaker Rocker Switch

M-CBR3A-M27

M-CBR5A-M26

Call for information on 110V / 240V Models.

65


www.apexinst.com 800-882-3214 / 919-557-7300

ConVersion FaCtorsConversion Factors

To Convert From to Multiply ByareaSquare Feet (ft2) Square Centimeters (cm2) 929.0304

Square Feet (ft2) Square Meter (m2) 0.09290304

Square Feet (ft2) Square Inches (in2) 144

Square Inches (in2) Square Centimeters (cm2) 6.4516

LengthFeet (ft....) Centimeters (cm) 30.48

Feet (ft....) Meters (m) 0.3048

Feet (ft....) Inches (in) 12

Inches (in) Millimeters (mm) 25.4

Inches (in) Centimeters (cm) 2.54

Mass/ForcePounds (lb) Grains (gr) 7000

Pounds (lb) Grams (g) 453.59237

Grains (gr) Grams (g) 0.06479891

Kilograms (kg) Pounds (lb) 2.2046226

Kilogram-force (kgf) Newton (N) 9.80665

Pound-Force9 (lbf) Newton (N) 4.44822

TemperatureDegrees Celsius (°C) Kelvin (K) K = °C + 273.15

Degrees Celsius (°C) Degrees Fahrenheit (°F) °F = 9/5 (°C + 32)

Degrees Fahrenheit (°F) Degrees Rankine (°R) °R = °F + 459.67 = 1.8k

Degrees Fahrenheit (°F) Degrees Celsius (°C) °C = 5/9 (°F -32)

Power, Energy, HeatBritish Thermal Unit per Min. (Btu/min.) Steam, Pounds per Hour (lb/hr Steam) 1 X 103

Horsepower (hp) Watts (W) 745.7

Horsepower, boiler (hp) British Thermal Unit Per Hour (Btu/hr) 33445.7

Horsepower, boiler (hp) Kilowatts (kW) 9.8095

Kilowatts, Hours (kWhr) British Thermal Unit Per Hour (Btu/hr) 3414.43

British Thermal Unit, mean (Btu) Kilogram-Calories (kcal) 0.252

British Thermal Unit, mean (Btu) Watts per Second, Joule (J) 1055.06

PressureInches of Mercury (in Hg) Millimeters of Mercury (mm Hg) 25.4

Inches of Mercury (in Hg) Inches of Water (in H20) 13.6

Inches of Mercury (in Hg) Atmospheres (atm) 0.0334211

Inches of Mercury (in Hg) Kilopascals (kPa) 3.386388

Atmospheres (atm) Bars (bar) 1.01325

Atmospheres (atm) Pounds per Square Inch (psi) 14.695949

Pascals (Pa) Newton per Square Meter (N/m2) 1.0

VolumeCubic Meters (m3) Cubic Feet (ft3) 35.314667

Cubic Feet (ft3) Liters (l) 28.136847

Liters (l) Cubic Centimeters (ccm) 1000

66


800-882-3214 / 919-557-7300 www.apexinst.com

equations

67


www.apexinst.com 800-882-3214 / 919-557-7300

Avogadro’s Number 6.02 x 1023 atoms/g atomGas Constants 82.05 atm cm3/(g-mole * K) 1.987 cal/(g-mole * K) 10.731 ft.... lb in2/(lb-mole * oR) 0.732 ft3 atm/(lb-mole * oR)1 g-mole of Ideal Gas 24.05 Liters at US EPA Standard Conditions

Constants

Standard Temperature (Tstd) 20oC (68oF)Standard Pressure (Pstd) 760mm Hg (29.92in Hg)

us epa standard Conditions

gas ConCentration unitsParts-per-million by volume (ppmv) to milligrams per dry standard cubic meter (mg/dscm)

Correct to x% O2

−−

×=)(2

2%@ %9.20

%9.202

dryactualsOxs O

OxCC

Gas Concentration UnitTo Convert From To Multiply ByParts-per-million(ppm) SO2 Nanogram/Std Cubic Meter (ng/scm) SO2 2.66 x 106

Parts-per-million(ppm) SO2 Pounds/Std Cubic Foot (lb/scf) SO2 1.660 x 10-7

Parts-per-million(ppm) NOx Nanogram/Std Cubic Meter (ng/scm) NOx 1.912 x 106

Parts-per-million(ppm) NOx Pounds/Std Cubic Foot (lb/scf) NOx 1.194 x 10-7

68


800-882-3214 / 919-557-7300 www.apexinst.com

An Sampling Nozzle Cross-Sectional Area, mm2 (in2)As Stack Cross-Sectional Area, m2 (ft2)Bws Percent Moisture in Stack Gas, % H2OCp Pitot Tube Calibration CoefficientCp(std) Standard Pitot Tube Calibration Coefficientcs Particulate Concentration in Stack Gas, g/dscm gr/dscm (lb/dscf gr/dscf)De Equivalent Diameter, m (ft....)Dn Sampling Nozzle Diameter, mm (in)∆p Stack Gas Velocity Pressure, mm H2O (in H2O)(∆p1/2) avg Average of the Squareroots of Velocity Pressure, (mm H2O)1/2 (in H2O)1/2

%EA Percent Excess Air, %Fd F factor for dry effluent, used with percent O2, dry basisFo Fuel Factor∆H@ Pressure Drop across Orifice Meter for 21.2 lpm (0.75cfm) at Std Conditions, mm H20 (in H2O)∆H Pressure Drop across Orifice Meter, mm H20 (in H2O)%I Isokinetic Sampling Rate, %K Isokinetic Rate ConstantK’ Critical Orifice Calibration FactorKp Pitot Tube ConstantL Length of Duct Cross-Section at Sampling Site, m (ft....)m Mass, g (lb)Md Stack Gas Dry Molecular Weight, g/g-mole (lb/lb-mole)Ms Stack Gas Wet Molecular Weight, g/g-mole (lb/lb-mole)pmr Pollutant Mass Emission Rate, kg/hr (lb/hr)Pb Barometric Pressure, mm Hg (in Hg)Ps Absolute Stack Pressure, mm Hg (in Hg)Pstd Standard Pressure, 760 mm Hg (29.92 in Hg)Qaw Actual Wet Volumetric Flowrate, acmm (acfm)Qsd Dry Standard Volumetric Flowrate, dscmm (dscfm)ρw Density of Water, 0.9982 g/mlθ Time (minutes)Ts Stack Temperature, oC (oF)Tstd Standard Temperature, 293K (528oR)Tamb Ambient Temperature, oC (oF)Vcr Critical Orifice Volume, m3 (ft3)Vm Dry Gas Meter Volume, m3 (ft3)Vlc Volume or Mass Liquid Collected in Impingers, ml or gW Width of Duct Cross-Section at Sampling Site, m (ft....)y Dry Gas Meter Calibration Factor

nomenClature

69


www.apexinst.com 800-882-3214 / 919-557-7300

An Sampling Nozzle Cross-Sectional Area, mm2 (in2)As Stack Cross-Sectional Area, m2 (ft2)Bws Percent Moisture in Stack Gas, % H2OCp Pitot Tube Calibration CoefficientCp(std) Standard Pitot Tube Calibration Coefficientcs Particulate Concentration in Stack Gas, g/dscm gr/dscm (lb/dscf gr/dscf)De Equivalent Diameter, m (ft....)Dn Sampling Nozzle Diameter, mm (in)∆p Stack Gas Velocity Pressure, mm H2O (in H2O)(∆p1/2) avg Average of the Squareroots of Velocity Pressure, (mm H2O)1/2 (in H2O)1/2

%EA Percent Excess Air, %Fd F factor for dry effluent, used with percent O2, dry basisFo Fuel Factor∆H@ Pressure Drop across Orifice Meter for 21.2 lpm (0.75cfm) at Std Conditions, mm H20 (in H2O)∆H Pressure Drop across Orifice Meter, mm H20 (in H2O)%I Isokinetic Sampling Rate, %K Isokinetic Rate ConstantK’ Critical Orifice Calibration FactorKp Pitot Tube ConstantL Length of Duct Cross-Section at Sampling Site, m (ft....)m Mass, g (lb)Md Stack Gas Dry Molecular Weight, g/g-mole (lb/lb-mole)Ms Stack Gas Wet Molecular Weight, g/g-mole (lb/lb-mole)pmr Pollutant Mass Emission Rate, kg/hr (lb/hr)Pb Barometric Pressure, mm Hg (in Hg)Ps Absolute Stack Pressure, mm Hg (in Hg)Pstd Standard Pressure, 760 mm Hg (29.92 in Hg)Qaw Actual Wet Volumetric Flowrate, acmm (acfm)Qsd Dry Standard Volumetric Flowrate, dscmm (dscfm)ρw Density of Water, 0.9982 g/mlθ Time (minutes)Ts Stack Temperature, oC (oF)Tstd Standard Temperature, 293K (528oR)Tamb Ambient Temperature, oC (oF)Vcr Critical Orifice Volume, m3 (ft3)Vm Dry Gas Meter Volume, m3 (ft3)Vlc Volume or Mass Liquid Collected in Impingers, ml or gW Width of Duct Cross-Section at Sampling Site, m (ft....)y Dry Gas Meter Calibration Factor

MERCURY SAMPLING EQUIPMENT APPENdIX K SORBENT TRAP MONITORING

METhOd 30B SORBENT TRAP RELATIVE ACCURACY TESTING AUdIT (RATA)

ISOKINETIC SAMPLING EQUIPMENT METhOd 1 dETERMINATION OF SAMPLING LOCATION ANd TRAVERSE POINTS

METhOd 2 dETERMINATION OF STACK GAS VELOCITY ANd VOLUMETRIC FLOW RATE

METhOd 3 dETERMINATION OF EXCESS AIR ANd dRY MOLECULAR WEIGhT

METhOd 4 dETERMINATION OF MOISTURE IN STACK GASES

METhOd 5 dETERMINATION OF PARTICULATE EMISSIONS FROM STATIONARY SOURCES

METhOd 5B NONSULFURIC ACId PM

METhOd 8 SULFURIC ACId MIST & SO2

METhOd 12 INORGANIC LEAd (SZL)

METhOd 13A TOTAL FLUORIdES (SIE)

METhOd 13B TOTAL FLUORIdES

METhOd 17 PARTICULATE BY IN-STACK FILTRATION

METhOd 23 dIOXINS & FURANS

METhOd 26A hYdROGEN hALIdES & hALOGENS

METhOd 29 MULTIPLE METALS

METhOd 201A PM10 EMISSIONS

METhOd 202 CONdENSABLE PARTICULATE MATTER

METhOd 202 CONdENSABLE PARTICULATE MATTER FIGURES

METhOd 206 AMMONIA

METhOd 306 hEXAVALENT ChROMIUM FROM ELECTROPLATING ANd ANOdIZING OPERATIONS

METhOd 316 FORMALdEhYdE FROM MINERAL WOOL ANd WOOL FIBERGLASS NdUSTRIES

METhOd 0010 SEMIVOLATILE ORGANIC COMPOUNdS

METhOd 0011 FORMALdEhYdE, OThER ALdEhYdES ANd KETONES

METhOd 0061 hEXAVALENT ChROMIUM

FLOW, PRESSURE & TEMPERATURE METhOd 2 dETERMINATION OF STACK GAS VELOCITY ANd VOLUMETRICFLOW RATE (TYPE S-PITOT TUBE)

GAS SAMPLING EQUIPMENT METhOd 4A STACK GAS MOISTURE (APPROX. METhOd)

METhOd 6 SULFURIC ACId MIST & SO2

METhOd 6A SULFURIC dIOXIdE, MOISTURE ANd CARBON dIOXIdE

epa reFerenCe methods

METhOd 6B SULFUR dIOXIdE ANd CARBON dIOXIdE

METhOd 11 hYdROGEN SULFIdE IN PETROLEUM REFINERY FUEL GAS STREAMS

METhOd 15A TOTAL REdUCEd SULFUR FROM PETROLEUM REFINERY SULFUR PLANTS

METhOd 16A TOTAL REdUCEd SULFUR

METhOd 18 INTEGRATEd BAG SAMPLING FOR ORGANIC COMPOUNdS

METhOd 26 hYdROGEN hALIdES & hALOGENS

METhOd 106 INTEGRATEd BAG SAMPLING FOR VINYL ChLORIdE

METhOd 308 METhANOL

METhOd 0030 VOLATILE ORGANIC COMPOUNdS (VOST)

METhOd 0031 VOLATILE ORGANIC COMPOUNdS (SMVOC OR SUPERVOST)

METhOd 0040 PRINCIPLE ORGANIC hAZARdOUS CONSTITUENTS (POhCS) USING TEdLAR® BAGS

METhOd 0051 hYdROGEN ChLORINE ANd ChLORINE

GAS ANALYSIS EQUIPMENTMEThOd 3 GAS ANALYSIS FOR ThE dETERMINATION OF dRY MOLECULAR WEIGhT

METhOd 3B GAS ANALYSIS FOR ThE dETERMINATION OF EMISSION RATE CORRECTION FACTOR OR EXCESS AIR

METhOd 7 dETERMINATION OF NITROGEN OXIdE EMISSIONS FROM STATIONARY SOURCES

IRM EQUIPMENTMEThOd 3A dETERMINATION OF OXYGEN ANd CARBON dIOXIdE CONCENTRATIONS IN EMISSIONS FROM STATIONARY SOURCES

METhOd 6C dETERMINATION OF SULFUR dIOXIdE EMISSIONS FROM STATIONARY SOURCES

METhOd 6C dETERMINATION OF SULFUR dIOXIdE EMISSIONS FROM STATIONARY SOURCES FIGURES

METhOd 7E dETERMINATION OF NITROGEN OXIdES EMISSIONS FROM STATIONARY SOURCES METhOd 10 dETERMINATION OF CARBON MONOXIdE EMISSIONS FROM STATIONARY SOURCES

METhOd 25A dETERMINATION OF TOTAL GASEOUS ORGANIC CONCENTRATION USING A FLAME IONIZATION ANALYZER

70


800-882-3214 / 919-557-7300 www.apexinst.com

Meter Calibration .............................................57Meter Calibration Equipment ...........................57Method 4 .........................................................33Method 4, Accessories ....................................33Method 5, Basic ..............................................34Method 5, Deluxe-Plus ....................................34Method 5, Compact .........................................35Method 5, Heated Filter Assembly ...................35Method 5, 5G ..................................................36Method 5, 5I ....................................................36Method 5, Alternate 5I .....................................36Method 8 .........................................................37Method 8, Accessories ....................................37Method 8, Alternate CTM-13 ...........................37Method 17, Flexible & Rigid.............................38Method 17, In-Stack Filter Assemblies ............39Method 17, Integrated In-Stack Filter Assemblies .............................................39Method 17, Glass In-Stack Filter Assemblies .............................................39Method 23, Deluxe Plus ..................................40Method 23, Sampler Kit Components ..............40Method 23, Coolant Pump Options .................40Method 23, Glassware ....................................40Method 23, Individual Accessories ..................40Method 26A, HCI ............................................41Method 26A, Accessories ................................41Method 29, Multiple Metals .............................42Method 29, Accessories ..................................42Monorails ........................................................60Method 201A, Particle Sizing ..........................44Method 201A, PM2.5 Cyclone Set ..................44Method 201A, Expanded Nozzle Set ...............44Method 201A, PM10 Cyclone Set ...................45Method 201A, PM10 & PM2.5 Cyclone Set .....45Method 201A, Cascade Impactor Set ..............46Method 201A, Particle Sizing Data Reduction WINCIDRS Software ......................................46Method 202, Dry Impinger ...............................47Method 202, Sampling Accessories ................48Method 202, Purge Accessories ......................48Method 0061, Hexavalent Chromium ..............48Nozzle Calibration ...........................................59Nozzles, Isokinetic Sampling ..........................14

Alumina ...........................................................54 Balances .........................................................55-56Ball & Socket Joint Adapters ...........................29-30Ball & Socket Joint Adapters, Impingers ..........29-30Calibration Equipment & Services ..................59Cases, Equipment ...........................................19Cases, Impinger ..............................................21Cases, Risers ..................................................21Cases, Modular Sample Frame .......................21Cases, Umbilical Gooseneck Adapter .............21Cases, Impinger Inlet Strain Relief ..................21Cases, Power Box Adapter .............................21Consoles, XC-5000 Automated Sampling ......4-5 Consoles, XC-522 / XC-572 Manual ..............6-9Consoles, XC-522 Accessories ......................8Consoles, XC-572 Accessories ......................9Consoles, XC-563 Digital Source Sampling ...43Consoles, XC-522 Accessories ......................8Consoles, XC-563 Digital Source Sampling ...10Consoles, XC-563 Audit Kit ............................10Consoles, Method 4 Source Sampling ………11Dessicator & Desiccants .................................53Dessicator & Desiccants, Vacuum Pump ........53Drierite Desiccants ..........................................54Filter Media .....................................................49-50Filter Ovens, Heated .......................................20Filter Ovens, Strain Reliefs ..............................20Filter Ovens, Socket Adapter ...........................20Filter Media, In-Stack Thimbles .......................50Glassware, Sets ..............................................22Glassware, Method 5 Sets ..............................22Glassware, Deluxe Method 5 Sets ..................23Glassware, Accessories ..................................23Glassware, Filter Assemblies/Components .....24Glassware, Individual & Accessories ...............25Glassware, Impinger Accessories ...................25Glassware, Cyclones ......................................25Glassware, Connectors ...................................26Glassware, Controlled Condensate .................26Glassware, Condensers ..................................27Glassware, Adapters .......................................27Glassware, Method 17 ....................................27Glassware, Method 202 ..................................28Glassware, Method 23 ....................................28

Nozzles, Sets..................................................14Nozzles, Oversized.........................................14Nozzles, Unions..............................................15Nozzles, Tube Nuts ........................................15Nozzles, Rings................................................15Nozzles, Vinyl Nozzle Caps ............................15Nozzles, Brushes............................................15Nozzles, Brush Sets .......................................15Nozzles, Ferrules............................................15Nozzles, Small Parts Kit .................................15Nozzles, Steel Alloys ......................................15Ontario-Hydro/Mercury ....................................43Ontario-Hydro/Mercury Accessories ................43Orifice Set .......................................................58Pitot Audit Equipment & Manometers ..............59Probe Assemblies, Method 5 ..........................16Probe Assemblies, Packing Gland .................16Probe, Method 5 Tube Heaters .......................16Probe, Replacement Pitot Tips .......................16Probe Liners ...................................................17Probe Liners, Tubing ......................................17Probe Liners, Adapters ...................................17Probe Sheaths, Method 5 Inconel ..................18Probe Sheaths, Method 5 Stainless Steel .......18Probe Sheaths, Air Cooled Method 5 ..............18Probe Sheaths, Alloy Method 5 .......................18Probe Sheaths, Blowers ..................................18Pump Assemblies, Method 5..........................12Pump Frame, Optional XF-05HW...................12Pumps, Lubricated Rotary Vane .....................12 Pumps, Lubricated Rotary Vane .....................12 Pumps, Diaphragm .........................................13Sample Lines, Heated .....................................32Sample Lines, Unheated Jumpers ..................32Sample Lines, Strain Relief .............................32Sample Recovery ............................................51Sample Recovery, Accessories .......................52Sample Recovery, Bottles ...............................52Silica Gel .........................................................54Umbilical Cables, Split Back ............................31Umbilical Cables, Classic ................................31Umbilical Cables, Classic Adapters .................31Umbilical Cables, Accessories .........................31Wet Test Meters ..............................................58

Isokinetic

www.apexinst.com

919-557-7300 or 800-882-3214Fax: 919-557-7110




Mercury & Gas saMplinG cataloG

Software

XC-8U

XC-6000EPC

Doug Bernhardt Customer Service

[email protected]

MERCURY & GAS SAMPLING EQUIPMENT


MERCURY AND GAS SAMPLING SYSTEMS & EQUIPMENT


APPENDIX

INDEX

ACCESSORIES


MercSampler™ Firmware & SoftwareHGCalc Software, Lap-tops ...................4a - 7a

Cabinet Configurations ...............................8a, 9a

Gas Conditioners, Stirling Cooler Glassware & Sorbent Cartridges ................10a, 11a

Audit Kit, Sorbent Traps, Sampler Console Method 30B Source Sampler......12a - 15a

XC-30B, Probes, Probe Accessories ..........16a, 21a

VOST & Method 6, XC-60 Meter Console Type Source Sampler Console ................20a, 23a

Miniature Probes, Versacase ..................24a, 25a

Midget Glassware & Accessories ..........................................26a, 27a

Method 6 (SO2) Supervost Sampling Equipment............28a - 29a

Method 26 (HLC), Gas Sampling Bags, Pump Modules ...30a - 32a

Method 0040, Method 7 Nitrogen Oxides .......................................33a, 34a

Mercury Replacement Parts ..................35a - 41a

Mercury Index ..........................................42a






[email protected]






mErCUry SamPling EqUiPmEntgaS SamPling EqUiPmEnt Gases in most stacks or ducts often are comprised of small amounts of volatile, potentially toxic compounds in addition to major gas components such as ni-trogen, oxygen, and carbon dioxide. At parts per million levels, most compounds with boiling points below that of water exist in a vapor state. Because gases generally are considered to be well mixed, sampling for constituents in the vapor phase usually is done through a simple probe from a single point of average gas velocity in the stack. A glass wool plug or filter often is used to screen out particulate matter from the gas stream prior to collecting the gas in a sample container or collection vessel.

irm EqUiPmEnt Some of the most common gaseous sampling methods (low flow rate) are Incorporated into 40 CFR Part 60 instrumental reference methods (IRM’s) where specific stationary source pollutants are measured continuously by means of an analytical instrument either to determine compliance with an applicable emission standard or to conduct performance testing of a continuous emission monitoring system (CEMS). The most commonly known instrumental methods are: Method 3A - Oxygen and Carbon Dioxide, Method 6C - Sulfur Dioxide, Method 7E – Nitrogen Oxides, Method 10 – Carbon Monoxide, Method 20 – Nitrogen Oxides, Sulfur Dioxide and Diluent Emissions from stationary gas turbines.

mErCUry SamPling EqUiPmEnt The automated XC-6000EPC MercSampler™ for Sorbent Trap Monitoring Systems is designed for continuous dual sampling of vapor-phase mercury emissions from stationary combustion sources, in accordance with the U.S. EPA MATS pub-lished in 40 CFR, Part 60-63, Appendix A, Subpart UUUUU and is MATS compliant. Performance Specification 12B: Specifications and Test Procedures for monitoring total vapor phase mercury emissions from stationary sources using a Sorbent Trap Monitoring System. These monitoring systems involve continuous repetitive in-stack sampling using paired sorbent media traps with periodic analysis of the time-integrated sam-ples. Persons using PS 12B should have a thorough working knowledge of methods 1, 2, 3, 4, 5 and 30B in appendices A-1 through A-3 and A-8 to this Part 63. Power generation utilities will be able to measure and obtain accurate and reliable mercury emissions data in order to determine emission levels and develop control strategies. Power generation utilities may choose from either Continuous Mercury Monitors or Sorbent Trap Monitors like the Apex XC-6000EPC for Mercury Emissions Monitoring. Apex can provide quality equipment at economical prices for all the catego-ries described above. For over 22 years, Apex Instruments, Inc., has concentrated on manufacturing equipment designed for use in sampling stationary combustion sources. Apex Instruments has always been directly involved with the environmental industry, working close with the U.S. EPA. When the Clean Air Act was enacted in 1990 and hazardous air pollutants were identified for control, Apex Instruments was at the forefront of product design, method evaluation and implementation.

3a www.apexinst.com 800-882-3214 /919-557-7300


Gases in most stacks or ducts are often comprised of small amounts of volatile and potentially toxic compounds, in addition to the major gas components of nitrogen, oxygen, and carbon dioxide. Most compounds, at parts per millions level, that have boiling points below water usually exist in a vapor state. Prior to collecting the gas in a sample container or collections vessel, a glass wool plug or filter is often used to screen out particulate matter from the gas stream.

gaSEOUS SamPling

FEATURED METhODSApex Instruments has Gas and Mercury Sampling Equipment for the Following Methods.

METhOD DESCRIPTION

MERCURYMEThOD 30B

Appendix K, Method 30B, RATA for Mercury

METhOD 4A Stack Gas Moisture Approximation

METhOD 6 Sulfuric Acid Mist & SO2

METhOD 6A Sulfur Dioxide, Moisture and Carbon Dioxide

METhOD 6B Sulfur Dioxide and Carbon Dioxide

METhOD 7 Nitrogen Oxides

METhOD 11 Hydrogen Sulfide in Petroleum Refinery Fuel Gas Streams

METhOD 15A Total Reduced Sulfur from Petroleum Refinery Fuel Gas Sulfur Plants

METhOD 16A Total Reduced Sulfur

METhOD 18 Integrated Bag Sampling for Organic Compounds

METhOD 26 Hydrogen Halides & Halogens

METhOD 106 Integrated Bag Sampling for Vinyl Chloride

METhOD 308 Methanol

METhOD 0030 Semi-Volatile Organic Compounds (VOST)

METhOD 0031 Volatile Organic Compounds (SMVOC or SuperVOST)

METhOD 0040 Principle Organic Hazardous Constituents (POHC’S) Using Tedlar Bags

XC-6000EPC MercSamplerTM Console shown

with Stirling Cooler

SK-606 Method 6

XC-30BMercSamplerTM Console

XC-60 Meter ConsoleSK-0031 SuperVost

Featuring the Automated line of

MercSamplerTM Consoles


800-882-3214 /919-557-7300 www.apexinst.com 4a

XC-6000EPC mErCSamPlEr™The automated XC-6000EPC MercSampler™ for Sorbent Trap Monitoring Systems is designed for continuous dual sampling of vapor-phase mercury emissions from stationary combustion sources, in accordance with the U.S. EPA MATS published in 40 CFR, Part 60-63, Appendix A, Subpart UUUUU and is MATS compliant. Performance Specification 12B: Specifications and Test Procedures for monitoring total vapor phase mercury emissions from stationary sources using a Sorbent Trap Monitoring System.

These monitoring systems involve continuous repetitive in-stack sampling using paired sorbent media traps with periodic analysis of the time-integrated samples. Persons using PS 12B should have a thorough working knowledge of methods 1, 2, 3, 4, 5 and 30B in appendices A-1 through A-3 and A-8 to this Part 63.

Power generation utilities will be able to measure and obtain accurate and reliable mercury emissions data in order to determine emission levels and develop control strategies. Power generation utilities may choose from either Continuous Mercury Monitors or Sorbent Trap Monitors like the Apex XC-6000EPC for Mercury Emissions Monitoring. For information on the mercury sampling visit: http://www.epa.gov/mercury.

J-hook, page 17

Stirling Coolerpage 11

Monorail, page 17

heated Sample Probe, page 16

heated Umbilical Line, page 17

Flange, page 17



meets U.S. EPa 40, CFr Part 75, appendix K and method 30B requirements (formerly method 324).

XC-6000EPC MERCSAMPLER™The XC-6000EPC MercSampler™ meter console captures all data necessary for paired sorbent trap sampling according to Appendix K and Method 30B. The meter console controls the sample flow rate proportionally to the stack flow rate and determines the standardized volume extracted through each sorbent trap. To collect the samples, two diaphragm vacuum pumps which work with the proportional valves and mass flow sensors, pull the samples through sorbent traps. Paired samples are extracted from the flue gas for the desired time period, from several minutes to several days. There are optical encoders mounted inside the gas meters to provide digital data for the volume sampled. Samples are then analyzed to determine time-averaged emissions.

Packing list accessories

Specifications

Dry Gas Meters:• Model KG2 series, positive displacement type. • 0.4 liter per revolution.• Optical encoder sensor with quadrature pulse output.• 8 digit LCD Display, 1 cc resolution. • Sample volumes are corrected to standard temperature and pressure, then stored.Sample Pumps:• BTC Diaphragm, Brushless Motor - 12 Vdc, 20” Hg Vacuum, 10,000 hour MTBF, 3900 RPM, Max. PSIG 24”.Sample Flow Control:• Vacuum: 0 to 30” Hg, 0 to 101 kPa, 2% accuracy.• Stainless steel sample manifolds fitted with mass flow sensors, vacuum sensors, and proportional valves.• Proportional or constant flow sampling.• Mass Air Flow: proportional flow control, 100 to 2000 ccm, port style, manifold mount.• Proportional Valve: Voltage Sensitive Orifice (VSO), 12 Vdc.Data Acquisition Control Board (DAC): • Enhanced Flash 16 bit RISC based microcontrollers; main and Digital Signal Processing (DS). Real time clock with auto backup and write protection to external SRAM.• High Speed 14bit A/D convertor with parallel DSP interface.• 1 GB SD Memory Card for data storage – stores up to 99 tests (30 day test runs). Embedded Ethernet Port with full TCP/IP Protocol and 256 bit encryption.• USB 2.0 Comm Input connection.

Thermocouple Multiplexer:• Accepts Type K Thermocouple inputs; input protection includes gas discharge tubes for ESD and surge protection.• 11 Pic Microcontrollers, 1 for each channel and MUX circuitry• MUX Circuitry to receive multiple inputs and transmit selected output.• 10 microcontrollers, one for each optically isolated channel.Integrated Temperature Control:• Designed into DAC for probe/trap heat control output via 25 amp SSR.Barometric Pressure: 600 to1100 mbar, 17.7 to 32.4”Hg, temperature compensated, amplified output.Communications:• PC user interface via Ethernet, USB, or optional wireless router• Remote access and control via onboard configurable router to owners Network Computer.• Optional TCP/IP MODBUS (ASCII or RTU) Communications to the DAS.• Optional interface to DAS system via TCP/IP Modbus.Weight: 34 lbs. (15.5 Kg).Dimensions: HxWxD 14” x 19” x 15.5” (35.56 cm x 48.26 cm x 39.37 cm).

The XC-6000EPC MercSampler™ simplifies most sampling require-ments by automating data acquisition, sample flow adjustments, leak checks, calculations, temperature control, and calibrations. Data is easily transferred to a Microsoft Windows XP-based PC through Ethernet, USB or an optional Wireless Interface.

XC-6000EPC

XC-6000EPC MercSampler™ Console

Features• Customer-Friendly Software and Firmware• Easy Data Export (Text and CSV files)• Configurable System Alarms (Dry Contact Closure/Piezo Alert)• Quarterly Audit Calibration Check (Optional Audit/Cal Kit)• Remote Input for External Test Pause and Resume

Installation: 19” Rack Mount Standard. Available 8U Transport case, ShockMount Rack or Weather Resistant Aluminum Cabinet Configurations.



MercSampler™ SOFTWAREMercSampler™ Automated Software works with a windows based platform. It allows the operator to quickly set up test profiles, perform sample runs, sensor calibration, DGM calibration, run quarterly audits and download test data at any time during or after a test run. Software can be purchased separately for use with customer supplied computer. Intuitive windows based operator interface may be run from local PC or remote network connection.

XC-6K-SW

MercSampler™ FIRMWARE:The Apex Instruments specifically engineered firmware (embedded software) has been designed to utilize the technical features of the RISC based Microchip microcontrollers. RISC microcontrollers provide decision making as well as precise “autonomous” control of the console while the laptop or PC is not connected. Microcontroller Hex code is easily updated in the field with a simple executable program and a programming interface cable which allows for continued enhancements and upgrades of the product.

Test Profile/Configuration Set-upCustomize test setup with the user defined profiles & configurations, or use the default set-tings which can be stored & retrieved.

Pre & Post Leak Test:Automated pre-test leak check with variable vacuum, and an auto-mated post-test leak check with vacuum, regulated to the maximum vacuum recorded during test.

Active Test Data:Real-time test screen enables the user to see instantaneous & /or cumulative data in an easy-to-read graphic display screen or raw text.

Calibration:Simple and easy to follow steps to fully calibrate all required components. This application provides electronic documentation stored with each test run.

Alarm:Multiple alarm configu-rations for tolerance, signal loss, idle time out, thermocouple in-puts and power failure.

MercSampler™ Software Screens

MerSampler Firmware Diagram

Computer Recommendations:Processor: 1.80 GHz or faster

Memory: 1 G, DDR2, 533MHZ

hard Drive: 40 G or greater, 5400 RPM SATA

Port: Ethernet Ready and USB 2.0

Optical Drive: CD-RW/DVD Combo (CD Required)

Software: Microsoft Windows XP, SP2 (Framework. net 3.5, Microsoft Office Installed, Adobe Reader)

Wireless: 1390 802.11 G Mini Card

Screen: Resolution 800 x 600, 14”



hgCalc Software

hg Calc Capabilites:Application used to import XC-6000 sample run data and trap analysis data to perform calculations for Appendix K. Sold separately.

The hgCalc Software uses sample run data and trap analysis. The sample run data from the MercSampler™ XC-6000 is imported into the application, where total mercury mass, hourly and total mercury emissions are calculated. The software insures the specifications in 40CFR, part 75 are met. The software will also verify QA/QC specifications regarding Section 2 breakthrough, relative deviation, and Section 3 spike recovery as shown in Appendix K, table K-1.

When all calculations are complete and data verified this can be exported currently in Excel, Comma Separated Values (CVS), Text/PDF format and will be available in an XML report format in the near future.

6K-HgCalC

Durabook Features• Intel Core-Duo T2080 - 1.73 GHz• 14.1” TFT 1024 x 768 Screen • WindowsXP/Vista Capable • 80GB SATA, 5400 pm• Intel® Graphics Media Accelerator (GMA)• 1024 MB DDRII• Spill resistant Keyboard (85 keys)• 6 Cell Lithium-Ion Battery

DurabookThe LT-D14RY Series has a magnesium case with four corner bumpers to protect internal components, a spill resistant keyboard with insulation, and anti-shock around the system’s vital components offering protection from drop and concussion. Optional sunlight readable screen is also available. One year warranty. Dimensions: HxWxD: 1.5” x 12.3” x 10.1” (3.81 cm x 31.2 cm x 25.7 cm). Weight: 5.73 lbs. (2.6 kg.)

Acer Aspire One NetbookAcer Aspire One AOD255E-13429 Diamond Black Intel Atom N455 (1.66GHz) 10.1” WSVGA 1GB Memory 250GB HDD Netbook.

lt-a

Features• OS Provided - Windows 7 Starter• Diamond Black Color• Resolution 1024 x 600• LED backlight & Acer CrystalBrite Technology• Intel GMA 3150• Chipset - Intel NM10• CPU L2 Cache - 512KB

Processor: CPU Type - Intel Atom CPU Speed - N455 (1.66GHz) CPU L2 Cache - 512KB Display: 10.1”, WSVGA Wide Screen Display (1024x600)Memory: 1GB DDR2 SDRAM hard Drive: HDD - 250GB, 5400RPM SATA Hard Drive Graphic Processor: Intel GMA 3150 Power: 3-cell Li-ion Battery (2200 mAh), Battery Life - up to 4 hours Dimensions: 10.17” x 7.28” x 0.95”, Weight - 2.43 lbs. Communications: LAN - 10/100Mbps WLAN - 802.11b/g/n Wireless LAN Netbook Camera: Built-in Camera Pixels - 0.3 Megapixel Expansion / Connectivity: 3 x USB 2.0, Video Ports - 1 x VGA, Audio PortsCard Reader: 2-in-1 Digital Media Card Reader- Secure Digital (SD) Card, MultiMediaCard (MMC) Video Memory: Shared system memory, Memory Slots - 1 x 204-Pin DDR3 SO-DIMM

LAPTOPSThe human Machine Interface to the MercSampler™ Console is the Apex MercSam-pler™ Intuitive software utilizing a Windows based PC/laptop. The system is available with several different laptop models available at Apex Instruments; Durabook, Durabook with sunlight readable screen, or the DELL Inspirion Mini 10 Netbook.

lt-D14ry-DB with Sunlight readable Screen

lt-D14ryNetbook - Call for Details

LT-D14RY

LT-A



The internal frame of the ShockMount Rack Case is mounted on revolutionary adjustable elastomer shock absorbers on all eight corners, designed to control the effects of shock and vibration on three axes. Includes rails, wiring, and hardware for console and gas conditioner installation. The “sway” space around the internal frame provides natural air conditioning. The configuration is suitable for use in a semi-protected area, such as annulus. Dimensions: HxWxD: 36.25” x 29.25” x 27.25” (92 cm x 75 cm x 70 cm); Empty Weight: 84 lbs. (38.1 kg).

XC-16USa

Features

• 19” Polyethylene Roto Molded Shell• Front and Rear Covers• Molded-in Handles • Adjustable Elastomer Shock Technology• Corrosive Resistant Polyethylene• Accepts 500 mL Bottles

Assembly includes: Rails, Wiring and Hardware to accept XCP-6000ECP and SGC-4000HG

XC-16USA Shockmount Case

ShockMount Rack Case Assembly

Shown with XC-6000EPC Meter Console and SGC-4000hG Stirling Gas Conditioner

MercSampler™ Cabinet ConfigurationsAfter 20 years in the industry, Apex Instruments recognizes the wide variety of customer site conditions and offers a range of equipment installation solutions. Apex Instruments has the experience and ability to custom engineer carry cases and cabinets to best suit any application. The installation solutions range from basic components that can be installed in an existing instrument control room, rackmount cabinets or environmental trailers, to self-contained meter console/gas conditioner systems that can be installed in a plant stack annulus or on a stack platform. Call for customization.

XC-8U Transport CaseThe XC-8U Transport Case has a tough exterior for durability. Multiple features help the case protect valuable products from a fall, tumble or rough landing. Dimensions: HxWxD: 18” x 22” x 20” (45.7 cm x 55.9 cm x 50.8 cm);Emty Weight: 21 lbs. (9.5 Kg).

XC-8U

Features

• 19” Black Polyethylene Roto Molded Shell• Front and Rear Covers• Molded-in Handles • Shock Absorbing Rubber Feet• Recessed Heavy-Duty Twist Latches• Replaceable Steel Thread Front Rails• Optional Rear Rails Available

XC-8U Transport CaseShown with Rack Mounted

XC-6000EPC MercSampler™Meter Console installed.

Custom Packaging Available. Call for details!



66” Enclosure with XCP-AC

XCP-ACCR-60 Enclosure Cabinet60-inch upright cabinet, 19” rack. Complete with removable louvered side panels and doors, 19”rack mounting rails, internal equipment drawer slides for XC-6000 Console and SGC-4000 Chiller (sold separately), integral slide tray for laptop or work-space, pre-wired with convenient duplex outlets and top or side sample line and power cable entry. (Not for outdoor service). Dimensions: 60” (cm) x 19.125” (cm) x 24” (cm). Weight: ~160 lbs. (72.57 kg).

Cr-60

CR-60-NV Enclosure Cabinet60-inch upright cabinet, 19” rack. Complete with Non-Ventilated side panels and doors, 19”rack mounting rails, internal equipment drawer slides for XC-6000 Console and SGC-4000 Chiller (sold separately), integral slide tray for laptop or work-space, pre-wired with convenient duplex outlets and top or side sample line and power cable entry. Dimensions: (HxWxD): 60” (cm) x 19.125” (cm) x 24” (cm). Weight:~160 lbs. (72.57 kg).

Cr-60-nV

Features• EMI/RFI Suppressor • Internal Corrosion Protection• Two Stage Thermostat• Maintains NEMA 12/3R Rating

Air Conditioner Air Conditioner keeps the cabinet at operating temperature while keeping out dust, fumes, oil and other contaminants. It operates continuously with a two stage thermostat to ensure a longer compressor life and maintain a 6° temperature range. The integral heater kit includes a thermostat and limiter for frost protection.

Capacity: 2000 BTU/H, 1500 BTU/H at 95°F (35°C).Temperature: Maximum 131°F (55°C), minimum -20°F( -28°C). Power: 115/100V, 60/50HZ.Weight: 35 lbs. (15.87 kg).

CR-66-NV Enclosure Cabinet66-inch upright cabinet, 19” rack. Complete with Non-Ventilated side panels and doors, 19”rack mounting rails, internal equipment drawer slides for XC-6000 Console and SGC-4000 Chiller (sold separately), integral slide tray for laptop or work-space, pre-wired with convenient duplex outlets and top or side sample line and power cable entry. Dimensions: (HxWxD): 66” (cm) x 19.125” (cm) x 24” (cm). Weight: ~165 lbs. (74.84 kg).

Cr-66-nV

XCP-AC

XCP-AC Optional Air Conditioner (includes integral heater for frost protection).

XCP-aC

Features• Powder Coated Aluminum• Easy Access Door• Durable Compact Design• Optional Heating and Cooling System• Accepts up to 1000 mL Bottles

MercSampler™ Cabinet Configurations

Aluminum Environmental CaseThe CR-I8U Aluminum Weather Resistant Environmental Case is compact, heavy-gauge Aluminum w/ Weather resistant Powder Coat Paint (internal 19” Rack mount) for meter console and Stirling gas conditioner. Dimensions: HxWxD: 37” x 21” x 21” (93.9 cm x 53.3 cm x 53.3 cm);Weight: 150 lbs. (68.03 kg). Weight with AC Unit: 185 lbs. (83.91 kg).

Cr-18U Cr-18U-aC Crt-18U-aC

XCP-ACCR-18U

AC option installed on 18U cabinet

CR-18U-AC CRT-18U-ACPermanent

transportable cabinet



GAS CONDITIONERS

Features• FPSC Chiller Module uses Environmentally Safe Helium Gas as a Refrigerant, no CFC’s.• The Module is Hermetically Sealed in Stainless Steel Casing for Fast and Easy Installation or Replacement as Necessary. • The Cold end of the FPSC is Inserted Directly into a Machined Anodized Aluminum Chiller Block. • C276 Hastelloy Serves as the Reverse Flow Condensate Separators.• Six Times Efficiency of Thermoelectric (peltier) Coolers.• Uses Less than 40w of Electricity.

• 12 V DC Power Supply.

The Apex Instruments SGC-4000hG Stirling Gas Cooler is specially designed for removing moisture and acid gases from flue gas samples. This new gas cooler uses an industrial grade super efficient Free Piston Stirling Cooler (FPSC) for chilling the sample gas to remove moisture. The Stirling will provide a robust, closed, dual channel gas conditioning system to deliver dry, acid free gas to the meter console. No peristaltic pumps to leak.

SgC-4000Hg

Optional 10U roto molded rack mounted CaseThe new US Series is the ultimate in American technology with its roto molded tuff shell, front and rear lids, recessed heavy-duty twist latches, molded in handles, shock absorbing rubber feet and the recognizable patented deep Roto-X pat-tern for solid stackability. The unique molded in unbendable valance and steel threaded rails with self tapping screws make the US Series racks convenient to use and the most durable. Dimensions: HxWxD: Outside Dimensions: 20.5” x 23.75” x 22” (52.07 cm x 60.32 cm x 55.88 cm). Weight: 20.46 lbs (9.28 kg).

XC-10UD

Specifications

Digital Temperature Control: +/- 1 OC, LED DisplayInlet and Outlet Temperature: Typical Inlet Temperature: 250-3000 F (Heated Lines Set Point).Cooling Capacity: >40 wattsDual Path Cooling Block: Anodized Aluminum.Condensate Bottle: 1000 ml (plastic coated glass).Acid Scrubber Cartridges: 2 ea. 2-5/8” s 11-3/8” Polycarbonate with Aluma-Sorb; 1/8” Stainless Steel FNPT fitting.

Reverse Flow Condensate Separator: C276 Hastelloy 1” OD x 4” Active Zone.Maximum Flow Rate: 2 lpm at 20% H2O Channel.Freeze Protection: 80w Heater. Ambient Operating Temperature: 0 to 500 C.Power Requirements: 120 V AC/2.5 amps.Dimensions: Without Bottles: HxWxD: 17”x16”x7” (43.2 cm x 40.6 cm x 17.8 cm).Weight: 25 lbs (11.3 kg).

Features• Roto molded uni-body construction• Threaded steel rails• Rear rails included• Interlocking X pattern for solid stackability

• Front and rear full size lids• Recessed latches• Molded-in handles• Shock absorbing feet

10U Molded Rack Case

SGC-4000hGStirling Gas Cooler

Shown with XC-6000EPC



Portable Stirling CoolerThe SGC-4000hGP Stirling Cooler Gas Conditioner Portable Unit comes with a top handle for easy transport and a durable UHMW polyethylene 6U case with condensate collection bottles. Any of the configurations are suitable for use with the Appendix K Mercury Sorbent Trap Sampling System. Dimensions: HxWxD: 22” x 13” x 23” (55.88 cm x 33.02 cm x 58.42 cm). Weight: 32 lbs (14.5 kg) without sorbent.

Portable Unit SGC-4000SgC-4000HgP (110V)SgC-4000HgP-V (240V)

Portable SGC-4000hGP

Alumina Sorbent is an activated alumina/silica gel primarily used for air drying, acid scrubbing and low temperature applications in the stirling sorbent cartridge. 5.5 lbs (2.5 kg) container (80% alum-sorb, 20% silica gel).

alUma-SOrBALUMA-SORB

Model DescriptionSC-30B 2 AlumaSorb cartridges, 2 in-line filters with drains & disposable

filter elements in Enclosure with sample line inputs/sample out-puts, dual stream, designed for use with XC-30B system.

SC-30B

GSB-1000L

Glassware and Sorbent Cartridges

GA-GL-45Sand GA-GL-45B

GSB-500SCGSB-1000SC

Model DescriptionGSB-1000SC Sample Bottle, Clear Glass, GL-45 Threaded, 1000mL,

Safety Coated for Condensate Collection. Requires: GA-GL-45B Cap and GA-GL-25S Seal.

GSB-500SC Safety Coated Sample Bottle, 500mL,

GSB-1000SCA Sample Bottle Assembled, Clear Glass, GL-45 Threaded, 1000mL, Safety Coated for Condensate Collection. Assembly Includes GA-GL-45B Cap and GA-GL-25S Seal.

GSB-1000L Bottle Sample, L-Shape, Clear Glass, GL-45 Thread, 1000mL (Not Safety Coated).

GA-GL-45S Seal for 1000mL Bottles.

GA-GL-45B Bored Cap, #45 Threads.

GSB-1000SCGSB-500SC



MercSampler™ Audit KitThe Apex Instruments AK-6000 MercSampler™ Audit Kit is designed for Appendix K and Method 30B compliance auditing of the XC-6000 MercSampler™ System. The kit includes a single or dual secondary reference meter console. Single kit is in a rugged 4U X-Case with a molded-in handle for easy transport. Dual kit comes with 8U black polyethylene molded case. Use with software version 80620-94 or later.

MercSampler™ Audit Screen Shot

Compatible with the MercSampler™ Software DGM-AP25SRD Reference Dry Gas Meter

with Optical Encoder:Digital Display: 8 Digit LCD, resetable. Durable: Built in a rugged 4U X-Case with molded-in handles for easy transport. Calibration: 15-point (Secondary Reference).Vacuum Gauge: 2.5” Face, Range: 0-30” Hg, 1% Accuracy.Single Dimensions: HxWxD: 21” x 9.5” x 14” (53 cm x 24 cm x 35.5 cm); 22 lbs (10 kg).

Can be used with XC-6000EPC MercSampler™ and XCP-6000EPC Portable Console

Packing List6” Thermocouple Y AdaptertCa-6yHg

36” Thermocouple Type KtCa-36Hg

m5C-520

• NIST Traceable• Handheld • Type K, °F or °C • Range: -409° to 2501.6° F (-245 to 1372° C) • Accuracy: 0.5° F (+0.25°C) for Type-K • Output resolution by 0.1° F or °C• Easy Dial Knob

Thermocouple Simulator handheld Digital Barometer• NIST Traceable • 15.9-31.01” Hg, Resolution: 0.03” Hg; 400-1070 mbar, Resolution: 1 mbar. • Altitude: -500 - 7000m, Resolution: 1m

Bar-4198

Insulated Ice Bath• Vacuum Insulated• Stainless Steel • Capacity: 16 oz.

aK-6tH16

handheld Waterproof Thermometer• NIST Traceable • Waterproof • Range: –58° to 572° F (–50° to 300°C) • Resolution: 0.1° from –20° to 200° • Accuracy: ±0.4°C or ±1.5°C

DPt-168-niSt

Secondary Reference Meter

Dgm-aP25SrD

Single Audit Kit

aK-6000

Single Audit Kit Accessories (Included):

aK-6000-Cal Annual Verification and Certification of the AK-6000 Audit Kit. Includes 15-point Calibration of the Reference DGM; Verification of Vacuum Gauge, Digital Barometer and Thermometer; System Inspection; and System Test.



Description

Size (mm) O.D. x L

StackCondition* Sections

Section Breakdown

Part Number

Mercury Trap, App K, Standard, Unspiked

10 x 185 Research or Baseline Testing

3 Sections .5 grams carbon each section

MTK-U

Mercury Trap, App K, Standard, 3rd Section Spiked - spike level desired ng

10 x 185 Standard 3 Sections .5 grams carbon each section

MTK-So

Mercury Trap, App K, High Temp, 3rdSection Spiked - spike level desired ng

10 x 185 High Temp 3 Sections .7 grams carbon 1st section, .5 grams section 2 & 3

MTK-H-So

Mercury Trap, App K, Acid Gas, 3rdSection Spiked - spike level desired ng

10 x 185 Acid Gase 3 Sections 5 grams sorbentconditioning pre-sec-tion, .5 grams carbonsection 1, 2 & 3

MTK-A-So

Mercury Trap, App K, High Particulate, 3rd Section Spiked - spike level desired ng

10 x 185 HighParticulate

3 Sections Inert pre-filter,.5 grams carbonsection 1, 2 & 3

MTK-P-So

Mercury Trap, App K, RATA, 3rd Section Spiked - spike level desired ng

10 x 185 Relative Accu-racy Test Audits

3 Sections .3 grams carbon each section

MTR-So

Long Term Mercury Traps (Appendix K)

Standard Spike Levels Range from 1,000 ng to 20,000 ng - CUSTOM LEVELS AVAILABLE

Section 3 Spiked

Section 2 Breakthrough

Section 1 Sample Collection

appendix K / PS 12B specifies sampling, and analytical, and quality-assurance criteria and procedures for the performance-based monitoring of vapor-phase mercury (Hg) emissions in combustion flue gas streams, using a sorbent trap monitoring system. The principle employed is continuous sampling using in-stack sorbent media coupled with analysis of the integrated samples. The performance-based approach of Appendix K allows for use of various suitable sampling and analytical technologies while maintaining a specified and documented level of data quality through performance criteria.

method 30B is a procedure for measuring total vapor-phase mercury (Hg) emissions from coal-fired combustion sources using sorbent trap sampling and an extractive or thermal analytical technique. This method is only intended for use only under relatively low particulate conditions (e.g., sampling after all pollution control devices).

mercury Sorbent traps

apex trap Features:• High Capacity Impregnated Carbon• Low Mercury Background Levels• Custom Spiking Available

• Textured, Easy Grip Caps will ensure Accurate Leak Checking• Protective Transport Tubes

Mercury Trap Legend

MT

Method 30 B

Type Option Spiking

K Appendix KR Appendix K RATA

High TemperatureAcid GasHigh Particulate

HAP

High Temperature& Acid Gas

C

SpeciatedS

Example: MTB-H-S1000Mercury Trap, Method 30B,High Temperature, Spiked at 1000ng

UnspikedUSpiked (Indicate ng Amount)S

*Stack Condition Key RATA Relative Accuracy Test Audits of App K Sampling Systems Standard Stack Temp 200-400oF, SO2 Level < 500PPM Acid Gases Stack Temp 200-400oF, SO2 Level > 500PPM high Temp Stack Temp > 400oF, SO2 Level < 500PPM high Temp & Acid Gas Stack Temp > 400oF, SO2 Level > 500PPM

Any trap can be customized for special stack conditions. For high particulate and wet stacks, we recommend using the Apex Sorbent Trap Shield to reduce sorbent trap plugging.

• Chain of Custody Included• Long Term Storage• Variable Testing Duration



Description

Size (mm) O.D. x L


Section Breakdown

Part Number

Mercury Trap, 30B, Standard, Unspiked

10 x 185 Standard 2 Sections .3 grams carbon each section MTB-U

Mercury Trap, 30B, High Temp, Unspiked

10 x 185 High Temp 2 Sections .5 grams carbon 1st section, .3 grams carbon 2nd section

MTB-H-U

Mercury Trap, 30B, Acid Gas, Unspiked

10 x 185 Acid Gases 2 Sections .5 grams sorbent conditioning pre-section, .3 grams carbon each section

MTB-A-U

Mercury Trap, 30B, High Temp/ Acid Gas, Unspiked

10 x 185 Acid Gases & High Temp

2 Sections .5 grams sorbent conditioning pre-section, .5 grams carbon 1st section, .3 grams carbon 2nd section

MTB-C-U

Mercury Trap, 30B, Standard, 1st Section Spiked - spike level desired ng

10 x 185 Standard 2 Sections .3 grams carbon each section MTB-So

Mercury Trap, 30B, High Temp, 1st Section Spiked - spike level desired ng

10 x 185 High Temp 2 Sections .5 grams carbon 1st section, .3 grams carbon 2nd section

MTB-H-So

Mercury Trap, 30B, Acid Gas, 1st Section Spiked - spike level desired ng

10 x 185 Acid Gases 2 Sections .5 grams sorbent conditioning pre-section, .3 grams carbon each section

MTB-A-So

Mercury Trap, 30B, High Temp/ Acid Gas, 1st Section Spiked - spike level desired ng

10 x 185 Acid Gases & High Temp

2 Sections .5 grams sorbent conditioning pre-section, .5 grams carbon 1st section, .3 grams carbon 2nd section

MTB-C-So

Short Term Mercury Traps (Method 30B)

Speciated Mercury Measurement of Flue Gas Requires use of Air Cooled Probe

Description

Size (mm) O.D. x L


Section Breakdown

Part Number

Mercury Trap, 30B, Speciated, Unspiked

10 x 300 Evaluation & Research

4 Sections .7 grams KCl section 1 & 2, .3 grams carbon section 3 & 4

MTB-S-U

Flue gas Oxidized Hg (Hg2+) species are adsorbed by a potassium chloride (KCl). After passing through the KCl sorbent, Elemental Hg (Hgo) is collected by iodated carbon sorbent. Total Hg (Hgt) is determined by summation of species.Proper temperature maintenance is critical (<130°C) for accurate speciation results. Sorbent trap shields are used to prevent buildup of particulate, which can potentially oxidize mercury creating a bias.

Speciated Mercury Trap

mercury Sorbent traps

Elemental hg (hgo)Section 3 Section 4 Breakthrough

Oxidized hg (hg2+)Section 1 Section 2 Breakthrough

Section 2 Breakthrough

Section 1Sample Collection



The XC-30B MercSampler™ Console, designed especially for performing Method 30B, simplifies sampling requirements by automating data acquisition, sample flow adjustments, leak checks, calculations, temperature control, and calibrations. Data is easily transferred to a Microsoft Windows Based PC through USB Interface. The XC-30B MercSampler™ performs dual sorbent trap sampling at flow rates up to 2.0 lpm. Can be operated with your choice of probes and gas conditioning systems, including our popular SGC-4000HGP Stirling Gas Conditioner.

Method 30B SourCe SaMpling SySteM

A Typical System Includes:• Automatic Console: XC-30B Sampling Console / with Netbook

(Alternative Option: Manual XC-260 Console Series)• Gas Conditioner: Portable versions

• Stainless Steel Probe: Optional length with single heater, for dual sample traps.• Umbilical: Heated line, specify length

portable gas Conditioner

heated dual trap Sample probe

heated umbilical

line

automated XC-30B MercSampler™ Console with netbook Computer and MercSampler™ Software

Please contact your sales representative for more details.



The XC-30B MercSampler™ Console, designed especially for performing Method 30B, simplifies sampling requirements by automating data acquisition, sample flow adjustments, leak checks, calculations, temperature control, and calibrations. Data is easily transferred to a Microsoft Windows Based PC through USB Interface. The XC-30B MercSampler™ performs dual sorbent trap sampling at flow rates up to 2.0 lpm. Can be operated with your choice of probes and gas conditioning systems, including our popular SGC-4000HGP Stirling Gas Conditioner.Please contact your sales representative for more details.

XC-30B MERCSAMPLER™ CONSOLE

Automated XC-30B MercSampler™ Console &

Netbook Computer

Features• Fully Automated for Paired Sampling• Dual Dry Gas Meters and Mass Flow Sensors• Alerts for Port and Traverse Point Changes• Simple Data Export• Compact Portable System• Eight Isolated Type K Thermocouple Channels• USB Interface• Easily Configured with Windows Based PC

Specifications

Dry Gas Meters:• Dual dry gas meters with integrated optical encoders, resolution to 1 cc• Model KG2 positive displacement type. • 0.4 liter per revolution.• Optical encoder sensor with quadrature pulse output.

Sample Pumps:• Dual Head Miniature Diaphragm Pumps with 12 VDC motors, Max Vac. 22” HgSample Flow Control:• Stainless steel sample manifolds fitted with mass flow sensors, vacuum sensors, and proportional valves.• Constant flow sampling.• Mass Air Flow: Flow control, 300 to 2500 ccm• Proportional Valve: Voltage Sensitive Orifice (VSO), 12 Vdc.

Data Acquisition Control Board (DAC): • Enhanced Flash 16 bit RISC based microcontrollers; main and Digital Signal Processing (DS). Real time clock with auto backup and write protection to external SRAM.• High Speed 14bit A/D convertor with parallel DSP interface.• 1 GB SD Memory Card for data storage – stores up to 99 tests • USB 2.0 Comm Input connection.

Communications:• PC user interface via USBThermocouple Multiplexer:• Accepts Type K Thermocouple inputs; input protection includes gas discharge tubes for ESD and surge protection.• 11 Pic Microcontrollers, 1 for each channel and MUX circuitry• MUX Circuitry to receive multiple inputs and transmit selected output.• 10 microcontrollers, one for each optically isolated channel.Integrated Temperature Control:• Designed into DAC for probe/trap heat control output via 25 amp SSR.Pressure: Barometric Pressure • 600 to1100 mbar, 17.7 to 32.4”Hg, temperature compensated, amplified output.

Vacuum • 0 to 30” Hg, 0 to 101 kPa, 2% accuracy• Durable UhMW Polyethylene Case: Built-In Handles (Size 10U) 19” Rack Mount Panel• AC Power: 120 Vac 60Hz. / 220 Vac 50Hz• Dimensions: 23in x 21in x 12in (58cm x 53cm x 30.5cm)• Weight: 39 lbs. (17.7kg)

XC-30B with netbook

XC-30B-V with netbook

XC-30B-V no netbook

Advanced Microprocessor Control



XC-260 SOURCE SAMPLER CONSOLEThe Apex XC-260 Source Sampler is a low-price, portable, field-proven meter console that is easy to use, and ideal for sampling mercury emissions based on CFR 40, Part 60, Method 30B.

The heart of the Apex Instruments manual system is the XC-260 Source Sampler, a precision meter console used for collecting Hg emissions. The average mercury concen-tration for the sampling period is determined by using the sample volumes measured by the dry gas meters and the results of the sorbent trap analysis.

Two flow rate configurations are offered; 0.2 to 2.4 litersper minute or 100-1000 cubic centimeters per minute.

XC-260 Manual Source Sampler Console

Features• Dual Independent Flow Paths• Dual Dry Gas Meters with Digital Displays• Coarse and Fine Valves for Precise Flow and Vacuum Control• Stainless Steel Valves and Fittings• Stainless Steel 1/4” Quick Connects• Digital Temperature Controller for Probe Heater • Elapsed Digital Timers • Dual Scale Vacuum Gauges• Durable Polyethylene Case with Built-In Handles (size 10U)

Sampler also ideal for method 18.

Model Description

XC-260 Source Sampler 0.2-2.4 lpm flow rate (120 VAC)

XC-260-V Source Sampler 0.2-2.4 lpm flow rate (240 VAC)

XC-260-A Source Sampler 100-1000 cc/min. flow rate (120 VAC)

XC-260-AV Source Sampler 100-1000 cc/min. flow rate (240 VAC)

XC-260-C Source Sampler 4.0 lpm. flow rate (120V)

XC-260-CV Source Sampler 4.0 lpm. flow rate (240V)

Consoles

Specifications

Dry Gas Meters: Model 25 Series, positive displacement diaphragm type, 0.7 liters per revolution, optical encoder sensor with quadrature pulse output, gas volume totalizer with an eight digit LCD display, 1 cc resolution (standard).Dual Diaphragm Sample Pumps (2): 12 VDC motors, Max Vac. 20” Hg.Probe Temperature Control: Compact, 1/32 DIN auto tuning indicating temperature controller with external 25 amp solid state relay. 115 VAC outlet 5-15R, Standard Type-K jack for input.

Digital Temperature Display: 3.5 Digit Display °F (-157°F to 1999°F), display and controller are resettable for °C upon request (OC is standard for export). Thermocouple Inputs: Five external Type K inputs plus two Type-K Internal Gas Meter connections.Flowmeters: Solid Machined Acrylic (0.2 - 2.4 lpm) *Optional 100-1000 ccm (XC-260A).AC Power: 120 V/60 Hz or Optional 220 V/50 Hz.Dimensions: 23” x 21” x 12” (58 cm x 53 cm x 30.5 cm).Weight: 39 lbs. (17.7 kg).



FlangePF-4/40CLS

OptionalJ-hook

hGP-1SJ

Air Cooled ProbehGPA-o-hS

XC-6000 CabinetCR-18U-AC

MercSampler ConsoleXC-6000

Stirling Gas Conditioner

SGC-4000hG

hosehGBh-o

Trolley / ChainP2751

Packing GlandPG-32/40CL

BlowerhGB-93CFM

AirConditioner

XCP-AC

Cement maCt Compliant

PS 12 (Appendix K) and Method 30BProbes come in standard lengths of 4’, 6’ and 9’. PS 12 (Appendix K) Probes are constructed from Alloy C276 for long-term use in extremely corrosive conditions. Type-K thermocouples are used to monitor, trap, stack and probe temperatures. Method 30B Probes come standard in stainless steel with Type-K thermocouples to monitor trap and stack temperatures. Both probes are designed for two 10 mm diameter traps (smaller trap adapters also available). The paired sorbent traps are inserted at the inlet end of the probe, using leak tight compression fittings before inserting directly into the flue gas stream.

MERCURY PROBES

The probe is heated to prevent any liquid condensation in the sorbent traps. An insulated, powder-coated aluminum probe head enclosure minimizes condensation at the junction between the probe and the heated umbilical/sample line.

reliable and Easy to Use With quick Set-Up time



Probe Length(feet)

Replace -�- with Probe Length Single heater for HGP�HS

Dual heaterHGP�HD

4 4’ Stainless Steel Heated Probe with 2” Outer Sheath, Type K Thermocouples, 1/2” Sample Lines, Insulated Probe Head Junction Enclosure; 120VAC

6 6’ Same as above



METhOD 30B STAINLESS STEEL PROBES

Probe Length(feet)

Replace -�- with Probe Length Dual heaterHGP�HCD

Dual heater withPitot HGP�HCDP

4 4’ Alloy C276 Heated Probe with 2” Outer Sheath, Type K Thermocouples, 1/2” Sample Lines, Insulated Probe Head Junction Enclosure; 120VAC

6 6’ Alloy C276 Heated Probe - Same as above



APPENDIX K ALLOY C276 PROBES

Part Number hG, Air Cooled heated Probe, Stainless Steel with Single heaters

HGPA-4-HS 4 Foot, Air Cooled Mercury Probe



HGPA-AI6 Air inlet for plant air, 3/8 fnpt, Sanitary cap with pipe thread

NEW AIR COOLED MERCURY PROBES

Part Number

hG, Air Cooled heated Probe, Stainless Steel

SBR-1000 Continuous High Flow (120 cfm), Weather Resistant Enclosure, w/ Pressure Sensor Digital Display, 5-ft of 1-1/2” Vacuum Hose, 120VAC.

SBR-93CFM Blower, APS, 93 CFM, 120V (for non-continuous sampling) Blower Assembly for APS Probes, SBR-10 frame, 93 cfm with 5ft of 1-1/2” Vacuum Hose, 120VAC, Variable Speed Controller

SBR-96CFM Blower, APS, 96 CFM, 120V

SBR-96CFM-V Blower, APS, 96 CFM, 240V

BLOWER ASSEMBLY FOR AIR COOLED PROBES

Part Number hG, Air Cooled heated Probe, Stainless Steel with Dual heaters




Part Number Description

TCA-765MG2C276 Type K Thermocouple Assembly with mini plug, C276 Alloy Sheath, magnesium oxide insulation, 1/8” diameter x 76.5”

TCA-112.5MG2C27 Type K Thermocouple Assembly with standard plug, C276 Alloy Sheath, magnesium oxide insulation, 1/8” diameter x 112.5”

REPLACEMENT STACK ThERMOCOUPLES

Add a “-V” to the part number for 240V/50Hz operation

Probe

Monorail

J- hook

Flange

Accepts MostSorbent Trap

Configurations

Method 30B

Appendix K

Appendix K RATA

Packing Gland

heatedSample Line

Call For additional information

Call For additional information



Product Description

PF-4/40CLS 4” Stainless Steel Flange, 150 lb. Pattern, 2.670 Bored Diameter with Size 40 Cam and Groove Connector (for probes with tube outer sheath).

PF-6/40CLS 6” Stainless Steel Flange, 150 lb. Pattern, 2.670 Bored Diameter with Size 40 Cam and Groove Connector (for probes with tube outer sheath).

PF-40CL-UPGRADE

Flange Upgrade to the Cam-Lock Version

PF-4/6UCLS Flange Plate, Universal, 4”/6” Port with Size 40 Cam-Lock Connections.

PF-6PG38S 6” Pipe Flange, 150 lb. Pattern, Stainless Steel, with 2” Pipe Packing Gland (for use with probes with pitot option, pipe oversheath).

PF-4PG38S 4” Pipe Flange, 150 lb. Pattern, Stainless Steel, with 2” Pipe Packing Gland (for use with probes with pitot option, pipe outersheath).

PG-32/40CL 2” Oversheath Packing Gland, Steel Body, TFE Packing (for use with PF-40CLS flange) with Size 40 Cam and Groove Connector.

PF-4T32HC 4” Port Adapter, Carbon Steel w 4” Female Threaded. Half Coupling Used to Adapt Existing Stack Port w/Male Thread to Apex 4” Flange with Cam-Lock.

CG-CKIT-1 Cam and Groove Conversion Kit #1, for Use with Heated Sample Lines Under 2” O.D. (1 5/8 to 1 11/16”), Includes 2 Sets of Cam and Groove Fittings, Heat Shrink.

CG-CKIT-2 Cam and Groove Conversion Kit #2, for Use with Heated Sample Lines Under 2” O.D. (2 1/4 to 2 5/16”), Includes 2 Sets of Cam and Groove Fittings, PVC and Heat Shrink.

Product Description

10MMNU-S Nut, 10 mm Stainless Steel Tube

10M-F-TG TFE/GLS, 10 mm Glass-Filled Teflon Single Ferrule

10M-F-TG-DZ TFE/GLS, 10 mm Glass-Filled Teflon Single Ferrule, Dozen

HGP-STA Small Trap (6mm) Adapter for Mercury Probes. Includes 10MTUR6M-S (with 10mm Nut and ferrule) and Three 1/4” Ceramic Ferrules.

4NU-S Nut, 1/4 Tube, Stainless Steel

4F-C Ferrule, 1/4 Tube, Ceramic Teflon

REPLACEMENT PARTS

Umbilical Length

Replace -�- with Umbilical/Sample Line Length

Sample LineHGU-�HD

Sample Linew/Pitot HGU-�HDP

15 15’ Appendix K. Heated, dual Sample Lines (1/4”) Type K Thermocouples. Probe Power Cord. 120VAC.




MERCURY PROBE ACCESSORIES Probe accessories are sold separately. Products can be custom made, so please call for any specific item.

FLANGES & PACKING GLANDS

Product Description

HGU-30UD 30 foot AppK Hg Umbilical Cable. Unheated Sample Lines (1/4”) for Paired Sampling, Stack & Trap Type K TCs. Probe Power Cord.

UNhEATED UMBILICAL/SAMPLE LINES

Product Description

HGU-25HD-R 25 foot Replaceable Sample Line

HGU-30HD-R 30 foot Replaceable Sample Line

hEATED UMBILICALS WITh REPLACEABLE SAMPLE

Additional length without pitot $40.00 per ft. Additional length with pitot $45.00 per ft

hEATED UMBILICAL/SAMPLE LINESThe umbilical/sample lines are available in various lengths and options: self-regulated heated and with or without pitot lines to meet the needs of customer applications.

Product Description

P1000-9 9’ with Chain, L-Bracket and Hardware, use w/ 4’ or 6’ probes

P1001-10 10’ Heavy Duty, Channel, with Chain, L-Bracket & Hardware, for use with lengths over 6’. Add $11 per LF

P2751 Swivel Frame Trolley with Eye-bolt,12” Chain and Quick Link

HGP-1SJ Mercury Probe Support “J” Hook attaches to standard Monorail

MONORAIL & hOOKS

CONSOLEDIF-N70 Inline Disposable, Nylon, Filter

Call For additional

information


MERCURY & GAS SAMPLING EQUIPMENTCOOLER (CONTINUED)

Product DescriptionAM-SP100A Fan, for Stirling Chiller, 115V, MechatronicsM-SD31 Temperature Controller, Red LED, Watlow.M-PSRS7512 Power Supply, 75W, 12V, 6 AMP, Input:

100-240VAC.M-PCB-REG-A Regulator PCB Assembly, 5V, for Use

with M-PSRS7512.M-CBR10A-M Magnetic Type Circuit Breaker Rocker Switch,

10 Amp. Horizontal Mount. Typically Used in 120V Consoles as Probe/Oven Breaker Switch. Panel Mount.

M-CB15A-M Magnetic Type Circuit Breaker, 15 Amp., Typi-cally Used in 120V Consoles as Main Breaker. Panel Mount.

SSR-330-25 Relay, SSRT, 25A 110/240V.SGC-J10-30B 10-Ft Jumper, For Use with Portable Hg

System, Gas Conditioner and Portable Hg Console.

SGC-110-30B 10-Ft Jumper for Use with Portable Gas Condi-tioner and Portable Model 30B Meter Console.

SGC-110-6K 10-Ft Jumper for Use with Portable Gas Conditioner and Portable Model XC-6000 Hg Meter Console.

SGC-J5 5-Ft Jumper, For Use in 18U Hg System. For Use with Rack Mount Gas Conditioner in 18U Cabinet.

PROBE REPLACEMENT PARTS

Product DescriptionTC-SP-KA Mini-Thermocouple Assembly, Type K, Male,

Cord Mount, includes Plug, Cover, Screws & Bushing.

HGH-2T144W Replacement Probe Heater, 2-ft, 575 Watt, (used on all probes, exit end of probe).

HGH-4T463W Replacement Probe Heater, 4-ft, 463 Watt.HGH-5T1650W Replacement Probe Heater, 5-ft, 1650 Watt.HGH-STRI72 Replacement Probe Heater 6-ft, 2000 Watt.HGH-9T838W Replacement Probe Heater, 9-ft, 775W.HGH-12T1000W Replacement Probe Heater, 12-ft, 1000W.MPT-6-133H Modular Pitot Tip (S-Type).9531K22 Cap Vinyl Protective, Used for Capping Sorbent

Traps During Pre- and Post-Leak Testing.10MMNU-S-EXT Particulate Shield for 10mm Sorbent Trap,

Stainless Steel Tube, 3/4” OD x 1.25” Lwith 10mm nut, Welded.

10MMNU-C-EXT Particulate Shield for 10mm Sorbent Trap, C276 Hastelloy C276 Tube, 3/4” OD x 1.25” L with 10mm nut, Welded.

10MMNU-S-EXTP Particulate Shield Plug, 10mm Stainless Steel Tube, 3/4” OD x 1.25” L with 10mm nut and plug, welded.

HGP-SHIELD-S-EXT-3 Stainless Steel Trap Shield, 3” Long x 2” Dia.HGP-SHIELD-S-EXT-6 Stainless Steel Trap Shield, 6” Long x 2” Dia.HGP-SHIELD–C-EXT-3 C276 Alloy Trap Shield. 3” Long x 2” Diameter.HGP-SHIELD–C-EXT-6 C276 Alloy Trap Shield. 6” Long x 2” Diameter.SR-2.625 U-Cord Neoprene Square Ring, 2” ID x 2 5/8”

OD x 3/16” TK, for CamLock Connectors.10M-F-TG-DZ Ferrule, 10mm, Glass filled Teflon, Dozen.10M-F-TG Ferrule, 10mm, Single, Glass filled Teflon10MMNU-S 10MM, Stainless Steel Tube Nut10MMBLP-S Plug, 10mm Tube Union, Stainless Steel

Product DescriptionQC-PMC2 QC, Stirling Gas Conditioner, Male,

Straight Connector, ¼” OD PTF, 1/8” OD X.170” ID (Used on Drierite Cartridge outlet/top) – Threaded Male.

QC-SGC-F4 QC, Stirling Gas Conditioner, Female,Coupling Body 1/4” OD (used on jumperfrom Stirling Cooler to sampling console) – Tube-Mount Female.

QC-SGC-M2 QC, Stirling Gas Conditioner, Straight Connector, Ferruless Polytube Fitting, PTF, 1/4” OD X .170” ID (Heated U-Cord Sample Line to Stirling, high-SO2 connec-tor) – Tube-Mount Male.

GA-GL-45S Seal for 1000ml Bottle.GSB-250SC Safety Coated Sample Bottle, 250mLGSB-500SC Safety Coated Sample Bottle, 500mLGSB-1000SC Sample Bottle, Clear Glass, GL-45

Threaded, 1000mL Safety Coated, for Con-densate Collection, Requires: GA-GL-45B cap and GA-GL-45S seal.

GSB-1000SCA

Sample Bottle Assembly, Clear Glass, GL-45 Threaded, 1000ml, Safety Coated, for Condensate Collection. Assembly includes GA-GL-45B cap and GA-GL-45S seal.

ALUMA-SORB

Activated Alumina Dessicant, Highly Ef-ficient Adsorbent with High Porosity and Contact Surface. 1/8” Diameter Beads, 2.5Kg (5.5 LB) Container with 80% Active Alumina (>/= 92%) and 20% Silica Gel.

COOLER CONSUMABLE

COOLER

Product DescriptionSGC-TR4/7-SCR Heat Exchange Assembly. Heat Exchange

Assembly, Silico Steel Coated, 4” Inner Tube, 7” Overall with Outer Tube.

26840 Aluma-Sorb Cartridge, Gas Drying Unit with 1/8” Stainless Steel FNPT Fittings. 2-5/8”x11-3/8”. 50g H2O Capacity. <.01psi@200lph press drop. 90psig working press. Polycarbonate.

26809 Mounting Clip for Aluma-Sorb Cartridge26840-A Aluma-Sorb Cartridge, Gas Drying Unit

with 1/4” Stainless Steel FNPT Elbow Barb Fittings. 2-5/8”x11-3/8”. 50g H2O Capacity. <.01psi@200lph Press Drop. 90psig Working Press. Polycarbonate. Includes Aluma Sorb.

TPFA-4-047W PFA, Tubing 5/32ID X 1/4OD X .047 Wall (jumper from U-cord to Stirling Cooler). minimum 10-ft recommended.



VOST AND METhOD 6 TYPE SOURCE SAMPLER CONSOLEThe MC-623 Source Sampler Console (MC-623) is applicable for U.S. EPA Methods 6, 11, 26, VOST, and Methods 0030 and 0031. It can be used for any method requiring accurate volume measurement of low sample rates, typically 0.3 to 4 liters per minute. The console features a small lightweight dry gas meter fitted with an optical encoder and re-setable digital volume totalizer. The internal diaphragm pump is corrosion resistant and rated for up to 6 liters per minute free flow. The gas meter temperature, and up to five remote temperatures, are measured with Type-K thermocouples and displayed with a digital temperature display (LED). Three digital temperature controllers are standard for accurately maintaining probe and filter temperatures and auxiliary heater temperature (when appli-cable). The source sampler console is housed in a sturdy lightweight vented aluminum cabinet featuring all stainless steel hardware and three carrying handles. The console is easily serviced by simply unlatching the front panel latches and sliding out the chassis, allowing full access to all components. Standard with all stainless steel fittings and quick connects.

Add “V” to end of product number for 240 VAC/50 Hz option.

MC-623 VOST and Method 6 Type Source Sampler Console

Features• Metric Precision Gas Meter w/Optical Encoder (1.0ccm resolution, zero reset) • Digital Temperature display • Flowmeter • Automatic Temperature Controllers (probe, filter and auxiliary) • Elapsed Minute Timer• Includes Internal Pump• Stainless Steel 1/4” Sample Quick Connects & Fittings

. Specifications

Gas Meter: Positive displacement diaphragm, 45 lpm maximum and 0.33 lpm minimum recommended flow rate. 8 digit LCD display with push button reset for volumetric totalizer. Factory set 0-99999.999 liter totalizer resolution.

Flowmeters: Solid Machined Acrylic (100-1000 ccm), (0.2 - 2.4 Lpm), (4.0 Lpm).

Temperature Control: Compact, 1/32 DIN autotuning indicating temperature controller with external 25 amp solid state relays.

Temperature Display: 3.5 digit red LED display, -200°C to 1250°C range, 1°C resolution with external 6-channel selector switch. Minihelic Gauge (Pressure) 0 - 100 mm H2O. Vacuum Gauge 0-30 in Hg.

Sample Pump: Double-Diaphragm with12 VDC Motors, Max Vac. 20” Hg.

Power: 120 VAC/60 Hz Standard, 240 VAC/50 Hz Optional.

Umbilical Connections: Electrical: 4-Pin Circular Connector.

Sample Line: 1/4” Quick Connects.

Thermocouples: Type-K, Standard Size.

Dimensions: HxWxD: 14.5” x 16” x 10.5” (36.8 cm x 40.6 cm x 26.7 cm).

Weight: 28 lbs (12.7 Kg).

Sampler Consoles

Product Description

MC-623A 100 - 1000 ccm

MC-623A-V 100 - 1000 ccm

MC-623B 0.2 - 2.4 lpm

MC-623B-V 0.2 - 2.4 lpm

MC-623C 0.2 - 4.0 lpm

MC-623C-V 0.2 - 4.0 lpm

Model A, B , or CA:100-1000ccm B: 0.2-2.4 Lpm C: 0.2-4.0 Lpm

V: 240VAC~no charge

MC-623 Meter Console



XC-60 METER CONSOLEThe XC-60 Source Sampling Console is a small, lightweight and economical sampling unit designed for portability. At less than 22 pounds, the model is easy to take anywhere. The XC-60 comes with a sample pump, dry gas meter, rotameter, fine and coarse controls valves, and five Type-K thermocouple inputs. Several models available. Suitable for U.S. EPA Methods, NIOSH methods, mold testing, asbestos testing, and more.

XC-60 GAS SAMPLER

Features • Precision Gas Meter w/Optical Encoder (standard)• Durable UHMW Polyethylene Case with Built-In Handle• Digital Temperature Display• Needle Valve for Precise Flow Control• Stainless Steel Quick Connect• Digital Elapsed Timer• Up to Five External Temperature Inputs• Dual Scale Vacuum Gauge

XC-60 -

Version A, B , or CA:100-1000ccmB: 0.2-2.4 LpmC: 0.2-4.0 Lpm

V: 240VAC~no charge

XC-60 Meter Console

Specifications

Gas Meter: Model AP25, positive displacement diaphragm type 0.7 liters per revolution. Optical encoder sensor, Gas volume totalizer with an 8 digit LCD Display, Quadrature pulse output, 1 cc resolution (standard).Sample Pumps: hargrave BTC II Series Pump - Dual head miniature pump, brush motor, 12VDC. Max unrestricted flow 11 LPM, Maximum Vacuum Range 0-20 in. Hg.

KNF N815 Series - Mini diaphragm vacuum pump, eccentric. Ryton pump head, CR Diaphragm, EPDM Valves, 15 LPM Flow, Maximum Vacuum 26 in. Hg110V/60Hz.Probe Temperature Control: Compact, 1/32 DIN autotuning indicating temperature controller with external 25 amp solid state relay. 4-Pin Circular Connector, Standard Type-K Jack for TC input.

Temperature Display: 3.5 Digit LED display (-105°F to 1372°F), Type-K Display and controller are reset-table for OC upon request (OC is standard for export).Vacuum Gauge: Dual Scale, 0-30” Hg/0-100kPa.

Sample Inlet: 1/4” stainless steel quick-connect.

Power: 115 VAC/60 Hz ; 240 VAC/50 Hz (optional).

Dimensions: HxWxD: 21” x 9.5” x 14” x (53 cm x 24 cm x 35.5 cm).

Weight: 21.6 lbs (9.8 kg).

Applicable to U.S. EPA Methods:• Method 4A Moisture Determination.• Method 6 Sulfuric Acid Mist and SO2.

• Method 11 Hydrogen Sulfide in Petroleum Refinery Gas Streams.• Method 18 Integrated Bag Sampling for Organic Compounds.• Method 26 Hydrogen Halides And Halogens• VOST Methods (Volatile Organic Compounds).• Any Sampling Method Requiring Accurate Volume Measurement at low sample rates (0.3 - 4 lpm).

Model Description

XC-60A Meter Console w/ Optical Encoder and Temperature Controller with DGM-AP25, Rotameter 100-1000 CCM, 120 VAC/60 Hz. Hargrave BTC II Series Pump.

XC-60A-V Meter Console w/ Optical Encoder and Temperature Controller with DGM-AP25, Rotameter 100-1000 CCM, 240V/50 Hz. Hargrave BTC II Series Pump.

XC-60B Meter Console w/ Optical Encoder and Temperature Controller with DGM-AP25, Rotameter 0.2 - 2.4 LPM, 120 VAC/60 Hz. Hargrave BTC II Series Pump.

XC-60B-V Meter Console w/ Optical Encoder and Temperature Controller with DGM-AP25, Rotameter 0.2 - 2.4 LPM, 240V/50 Hz. Hargrave BTC II Series Pump.

XC-60C Meter Console w/ Optical Encoder and Temperature Controller with DGM-AP25, Rotameter 0.2 - 4 LPM, 120 VAC/60 Hz. KNF N815 Series.

XC-60C-V Meter Console w/ Optical Encoder and Temperature Controller with DGM-AP25, Rotameter 0.2 - 4 LPM, 240V/50Hz. KNF N815 Series.

Sampler Console



MINIATURE PROBE ASSEMBLIES & LINERSMINIATURE PROBE

Miniature Probe Assembly

8

8

Miniature Liners

STAINLESS STEEL ADAPTERS

Stainless steel adapter, #12/5 socket to 1/4” tube fitting.MGA-12S4

Model DescriptionMGNS-12B Glass Adapter, 12/5 Ball to #15 Thread

Miniature Probe Accessories

Model DescriptionMPS-36H 36 inch Miniature Heated Probe

sheath, 3/4 inch OD Sheath, 120 VAC (Liner not included).

MPS-48H 48 inch Miniature Heated Probe Sheath, 3/4 inch OD Sheath, 120 VAC (Liner not Included).

MPS-60H 58 inch Miniature Heated Probe Sheath, 3/4 inch OD Sheath, 120 VAC (Liner not Included).

Miniature Probe Assemblies Miniature Probe LinersModel DescriptionMPL-36G1 36 inch, 8 mm (5/16”) OD,

Pyrex Liner with 12/5 Ball Joint

MPL-36G2 36 inch, 8 mm (5/16”) OD, Pyrex Liner with Glass Cup (No Ball Joint)

MPL-36G4 36 inch, 8 mm (5/16”) OD, Pyrex Liner, Plain Both Ends (No Ball Joint)

MPL-36G5 36 inch, 6 mm (1/4”) OD, Pyrex Liner, Plain Both Ends (No Ball Joint)

MPL-48G1 48 inch-8mm Pyrex Liner with 12/5 Ball Joint

MPL-48G2 48 inch Pyrex Liner (8mm) with Glass Cup (No Ball)

MPL-48G4 48 inch-8mm Pyrex Liner, Plain Both Ends

MPL-48G5 48 inch Pyrex Liner, 1/4 inch, (No Ball Joint)

MPL-60G1 60 inch-8mm Pyrex Liner with 12/5 Ball Joint

MPL-60G2 60 inch pyrex liner (8mm) with Glass Cup (No Ball Int)



Stainless Steel #12/5 socket elbow to 1/4” tube fitting.MGA-12SEL4

Glass filled PTFE Adapter, 12 mm socket to 5/16” tube fitting, MPL probe liner adapter.MGA-12S5TG

Glass filled PTFE Adapter, 12 mm ball to 5/16” ube fitting, MPL probe liner adapter.MGA-12B5TG

PTFE ADAPTERSStainless steel adapter, #12/5 Ball to 1/4” tube fitting.MGA-12B4



SK-606 Method 6

VSB4 with PC-3/4

VERSACASE

VersaCase4 Sample Case with hinged, removable doors. Does not include probe clamp.Inside cabinet Dimensions: HxWxD 9.5” x 12.5” x 6.75” (24.1 cm x 31.8 cm x 17.1 cm).

VSB4

VersaCase products are sturdy, reliable items for use in many U.S. EPA methods. Apex Instruments has an array of Versacase products available for any source testing need.

VSB2 VERSACASEThe VSB2 VersaCase is a lightweight portable lab frame ideal for supporting complex glassware setups. Originally designed to complement the Model 623 Source Sampler Console for Volatile Organic Sampling (VOST). Unit fea-tures a pre-punched panel with a combination handle/monorail bracket, coolant reservoir brackets (accommodates standard modular impinger cases), and removable front and rear doors. Interchangeable probe clamps for 3/4” and 1” sheaths are available. Call for details on customized kits for other testing methods.Dimensions: HxWxD: 24” x 12” x 11” (61 cm x 30.5 cm x 27.9 cm).

VSB2

Features• Lightweight: 5.5 lbs (2.5 kg)• Slotted Probe Clamp Mount for Different Height Glassware• Handle/Monorail• Hinged Removable Doors• Umbilical Support Bracket

VSB2(shown open with blank panel)

Model DescriptionPC-3/4 Stainless steel hinged probe

clamp (for 3/4” OD Probe)

PC-3/4E Extended stainless steel hinged probe clamp (accepts MFH-25CA)

MSB-1 Insulated midget impinger sample tray with drain valve

ICE-20 Small Ice Pack, blue gel

VSB Options

The VersaCase Umbilical Cable (VU-) includes four Type-K thermocouple extensions, 1/4” quick connects, sample line and three plug-in jacks terminating in a sturdy aluminum junction box. Standard with stainless steel fittings and quick connects. Other lengths available upon request.Add “V” to end of product number for240 VAC/50 Hz option.

30’ VersaCase Umbilical with Connection Box, 1/4” stainless steel quick connect.

VU-30

90’ VersaCase Umbilicalwith Connection Box,1/4” stainless steelquick connect.

VU-90

VERSACASE UMBILICAL

SUPERVOST SAMPLING KIT, SK0031Kit for VersaCase2 with 110 Volt Pump: VSB2, PC3/4, V31-CGS, VC31-SET, MPS-36H, MPL-36G2 (3x), VU-30, MM5-P, SB-3.

SK-0031

VSB2(exterior)

60’ VersaCase Umbilical with Connection Box, 1/4” stainless steel quick connect.

VU-60



MIDGET GLASSWARE & ACCESSORIES (METhOD 6)Midget glass impingers feature unground double O-Ring 24/40 taper joint and 12/5 O-Ring ball joints. Bottle capacity is 40ml. The Insulated Sample Tray with Drain Valve (MSB-1) can hold a Midget Glassware Set (MGN-CGS) and two nontoxic Ice Packs (ICE-20). The ice packs allow quick turn around. At the end of the run simply remove the ice packs and drain the water before purging. Set includes impingers (plain and orifice), U-Tubes, Connectors and Clamps.

MSB-1 With Glassware Set(Method 6)

Midget Impinger AssemblyMidget Impinger Assembly with plain stem (#12/5 unground O-Ring ball joints).

mgn-1a

Midget Impinger AssemblyMidget Impinger Assembly with orifice stem (#12/5 unground O-Ring ball joints).

mgn-1aO

Midget U-TubeMidget U-tube with 12/5 unground socket joints.

mgn-2

Midget Knockout Impinger AssemblyMidget Knock-out Impinger Assembly (#12/5 unground O-Ring ball joints).

mgn-1aK

Midget Impinger InsertMidget Impinger Insert with plain stem (#12/5 unground O-Ring ball joints).

mgn-1i

Midget Impinger InsertMidget Impinger Insert with orifice stem (12/5 Unground O-Ring ball joints).

mgn-1iO

MIDGET GLASSWARE

Midget ConnectorL-Connector with 12/5 sockets.

mgn-6

Midget Impinger BottleMidget Impinger Bottle with unground taper joint.

mgn-1B

The Apex Instruments Method 6 and Method 26 Sampling Kits are normally used in conjunction with the XC-60 or Model 623 Source Sampler Console or alternative metering devices. The midget impingers

can be used for many methods, including NIOSh and OShA methods. The Method 6 Sampling Kit (SK-606) can be modified for U.S. EPA Method 26 with the addition of the SK-626 Kit.

Packing List

Packing List

MIDGET GLASSWARE SET (INCLUDES):• 4 Midget Impingers (3 MGN-1A, 1 MGN-1AO)• 3 Midget U-Tubes (MGN-2)• 1 L-Connectors with 12/5 Sockets (MGN-6)• 10 12/5 Ball Joint Pinch Clamps (BS12)

mgn-CgS

MGN-CGS Midget Glassware Set

Insulated Sample Tray with Drain Valve.mSB-1

Ice Packs.iCE-20



Glass 3-way Valve with #12/5 unground socket joints, inlet and outlet, ball joint purge. mgn-3SB

Glass 3-way Valve with #12/5 unground socket joints. mgn-3

Glass adapter, #12/5 unground socket to 1/4” tube.mgn-12S4

Glass Adapter, #12/5 socket to #18 thread.

mgnS-12S/18

Glass adapter, #12/5 unground O-Ring ball to 1/4” tube.mgn-12B4

Ungrounded glass adapter, #12/5 ball to #18 thread.mgnS-12B/18

Glass 3-way valve Glass Adapters

MIDGET GLASSWARE & ACCESSORIES (CONTINUED)

Impinger Outlet with thermocouple and tubing, #12/5 stainless steel socket. For use with midget glass impinger (MGN-1A).

mga-101

Impinger Outlet with thermocouple and 1/4” straight tube for use with PTFE Impingers (MGT-1)

mgS-101

Pinch Clamps

Ball Joint ClampStainless steel #12/5 ball joint clamp.

BS12

Keck ClipPlastic Keck Clip, Size 13, for #12/5 ball joints.

KBS-13

Ball Joint ClampStainless steel #12/5 ball joint clamp, Pyrex® with screw.

rC-13

MIDGET ACCESSORIES

Viton O-Ring for grooved #12/5 ball.

O-011V

Viton O-Ring for grooved #12/5 Ball, DOZEN.

O-011V-DZ

Impinger Outlets

O-Rings

MidgetPFA Impinger

Model DescriptionMGT-1 Midget PFA Impinger with Two 1/4” Tube Unions,

60 ml Volume

MGS-2T6 TFE U-Stem (1/4” OD)

MGS-3T6 TFE L-Stem (1/4” OD)

4SC4-PFA PFA Tube Union, 1/4”

PFA Impingers

Model DescriptionGA-GL-18B Bored Cap, GL #18

Threads

GA-GL-18S Silicone Seal Ring, 8 mm Hole Diameter

GA-18T6 PTFE Seal Ring, 6 mm Hole Diameter

GA-18T8 PTFE Seal Ring, 8 mm Hole Diameter

GL #18 Cap and Seals



METhOD 6 (SO2)The Method 6 Source Sampling Kit for VersaCase4 (SK-606) features the miniature VersaCase. Method 6 measures sulfur dioxide (SO2) emissions from stationary sources. A gas sample is taken from the stack, and separated from the mist. The VersaCase can be used with the new XC-60 or the classic MC-623.

SK-606

SK-606-V

Kit Includes• Glass lined heated probe assembly • Midget glassware set • Sample tray • Nontoxic ice packs• VersaCase4• Probe Clamp• Outlet with thermocouple well• Connecting accessories• Adapters• Seals• Umbilical cable to connect to the XC-60 or Model 623 Source Sampler Console

Sampling Kit for Versa Case4 (SK-606)

Packing List

VU-30



SUPERVOST SAMPLING EQUIPMENTThe Apex Instruments SuperVOST Sampling Kit includes the multifunctional VersaCase2 cabinet with a redesigned mounting panel, glass-lined probe assembly, VOST glassware with clamps, insulated coolant reservoir with submersible pump and VU-cord. The VU-cord can be used for connection directly to the Model 623 Source Sampler Console, XC-60 Meter Console or to Models 572 and 563 with the VUA orifice flow adapter.

SuperVost Sampling Kit

Packing List

Packing List

TPFA-4/2

V31-CGS SuperVOST Glassware Set Includes:

1 VG-1/18 3-way Valve with TFE Valve Body, #18 Threads Inlet and Purge, 8mm Outlet

1 VG-2/18 VOST Charcoal Trap, #18 Threads & Glass Frit

2 VG-34/18 SuperVOST Coil Condenser, 2” Diameter, #18 Threads and Water Jacket Hose Barbs

1 VG-54/18 SuperVOST Water Trap, 40ml with #18 Threads, 45° Offset Exit

4 VG-6 VOST Absorption Cartridge, 1/4” Ends

1 4SC4-T PTFE Straight Union, 1/4”

2 GA-18T8 TFE Seal Ring, 8mm Hole Diameter

7 GA-18T6 TFE Seal Ring, 6mm Hole Diameter

10 GA-GL-18B Bored Cap, #18 Threads

1 GA-GL-18/9 Silicone Seal for 1/4” Tubing, 6mm Hole Diameter

1 TPFA-4-047W PFA Tubing, 1/4 inch, formed, (5 ft. total, 2 pieces)

3 TL-7/5 Surgical Tubing, 3/8”, 24” length

1 VG-125 Knock-out Flask, 125mL with #15 Threads

SuperVOST Glassware Set

Model DescriptionPC-3/4 Stainless steel hinged probe clamp

(for 3/4” OD Probes)

PC-3/4E Extended stainless steel hinged probe clamp (for 3/4” OD Probes)

Versacase Probe Clamps

Model DescriptionGA-GL-18B Bored Cap with Screw/Hole,

GL #18 Threads

GA-18C Solid Cap with Screw, GL #18 Threads with Seal

GA-GL-18/9 Silicone Seal Ring for 1/4” Tubing, 9.0 -11.00 mm Hole Diameter

GA-GL-18S Silicone Seal Ring, #18 Threads, 6.5 mm Hole Diameter

GA-18T6 TFE Seal Ring, 6 mm Hole Diameter

GA-18T8 TFE Seal Ring, #18/8 mm Hole Diameter

GL Caps and Seals for SuperVost

SK-0031 SuperVost Source Sampling Kit For VersaCase2 with 110Volt Pump: VSB2, PC3/4, V31-CGS, VC31-SET, MPS-36H, MPL-36G2 (3x), VU-30, MM5-P, SB-3.

SK-0031

SK-0031-V SuperVost Source Sampling Kit For Method 0031, with 240Volt Pump.

SK-0031-V



The Method 26 Extension Kit for VersaCase (SK-626) is required for modification of the Method 6 Source Sampling Kit (SK-606) in order to perform Method 26.The sample is passed through a pre-purged heated probe and filter into dilute sulfuric acid then dilute sodium hydroxide solutions which collect all the gaseous hydrogen halides and halogens, respectively. The filter collects particulate matter including halide salts but is not routinely recovered and analyzed. The separate solutions are analyzed by ion chromatography.

SK-626

SK-626V

METhOD 26 (hYDROGEN hALIDES, hALOGENS)

3-Way Valve heaters

Kit Includes• Extended VersaCase Probe Clamp• Additional Impingers• Liners• Heated filter assembly• Filters, TFE Membranes• Adapter• Heater assembly• Three way Heated Assembly valve

SK-626 is for use in addition to SK-606 Method 6 Kit.

Model DescriptionMH-30 Replacement 30 W/120 VAC Heater for MVH-1

(add “V” for 240 VAC)

MGN-3SB Glass 3-way Valve with 12/5 Unground Socket Joints Inlet and Outlet, Ball Joint Purge

TFA-25B 25 mm TFE Filter Replacement Body Only with 1/4” Tube Union, No Clamp

MH-50 Firerod Heater Sub-Assembly with Power Cord and TC, 50 W, 120 VAC, for MFH-25 Filter Clamp

TF1165 TFE Membrane, 25 mm, 30-60 Micron, 10/pack

PC-3/4E Extended 3/4” Probe Clamp (accepts MFH-25CA)

MGN-12B4 Glass Ball Adapter, Unground 12/5 Ball to 1/4” Tube w/ O-Ring

MFH-25C Filter Clamp, Threaded, Aluminum, for 25mm Filter Assembly

Method 26 Accessories

heater 3-way Valve Heater Assembly, aluminum body with 30W heater and thermocouple. Shown here with valve.

mVH-1

mVH-1V

heated Filter Assembly w/ClampHeated Filter Assembly with clamp (MFH-25C), 25 mm filter body (TFA-25B) and heater (MH-50).

mFH-25Ca

mFH-25CaV

Sampling Kit forVersaCase (SK-626)



GAS SAMPLING BAG SAMPLING EQUIPMENT FOR VOC’SThe M180 VacBag Sampler System takes an integrated gas sample, in accordance with the U.S. EPA Method 18, by evacuating the stainless steel airtight container fitted with a gas sampling bag, preventing the gas sample from coming into contact with the sample pump. The TBE Enclosures come standard with clear Lexan® lid, a 1/4” valved female quick connect and a 1/4” male quick connect.

SK-m180 SK-m180-V

Bag Stainless Steel Enclosures4 Gallon stainless steel Bag Enclosure with 1/4” stainless steel quick connects. Accepts TB-18-P.

tBE-4g6 Gallon stainless steel Bag Enclosure with 1/4” stainless steel quick connects. Accepts TB-18 x 24-P.

tBE-6g 10 Gallon stainless steel Bag Enclosure, with 1/4” stainless steel quick connects. Accepts TB-18 x 36-P.

tBE-10g

Drum heaterFor heated gas bag sampling up to 150°C (300°F), Apex Instruments offers a thermostatically controlled flexible silicone rubber drum heater and thermal blanket. The heater is easily attached with quick acting spring latches and the quilted thermal blanket is attached with snap buttons.

Flexible Silicone Drum Heater 4-10 Gallon with Thermostat, 300 Watts/240 V Adj. 50 to 425°F, 220 VAC.

tBE-HEatEr-V

Insulated Blanket, fits the TBE-4G.tBE-4g-BKt



10 gallon (5 liter)

4 gallon(16 liter)

6 gallon(25 liter)

TBE-4G TBE-6G TBE-10G

Kit includes • 6 gallon airtight stainless steel enclosure• 3 Gas sampling bags• Sample pump• PFA tubing• Stainless steel unions and tubing• 1/4” Quick connects• 4 and 10 gallon enclosures also available

Caution: The heater temperature will rise rapidly since the drum is virtually empty. Start with the thermostat set at the lowest temperature setting. Do not use in hazardous locations.

heater temperatures should be closely monitored during initial use. Thermostat requires several cycles to break in. Calibrate the thermostat while installed before initial use.

Model DescriptionO-452N50 12” O-ring Seal, Nitrile for TBE-4G, 6G, and 10G

QC-M4-SS 1/4” Stainless Steel Male Quick Connect

QC-F4-SS 1/4” Stainless Steel Female Quick Connect

Accessories

Flexible Silicone Drum Heater 4-10 Gallon with Thermostat, 300 Watts/240 V Adj. 50 to 425°F, 110 VAC.

tBE-HEatEr

Tedlar® Gas Sampling Bags Are No Longer Available.

Please Call Apex For An Alternative Material.



TEDLAR® GAS SAMPLING BAGSTedlar® Gas Sampling Bags are the first choice for collecting a variety of gaseous com-pounds. Tedlar® bags are referenced for many U.S. EPA Methods including 3,18 and 0040. Bags fabricated from Tedlar® film are inert to most gases, resist gas permeation and can be reused for most applications after proper cleaning. They are flexible and strong, and use of a rigid container ensures a longer life and convenience during transporting. Tedlar® bags are fabricated from transparent 2ml film or can be special ordered fabricated from opaque black Tedlar® for photosensitive compounds. Custom sizes available upon request.

SAMPLING PUMP MODULESThe compact Gas Sampling Pump incorporates a Hargraves Miniature Dual Head Pump with a maximum vacuum of 25” Hg and open flow of 6 to 11 lpm. The polyethylene terephthalate (PET) pump is constructed with a silicone valve and neoprene diaphragm. Pumps feature direct read rotameter, non-reversible male and female quick connects, stainless steel fittings and needle valve, a vacuum gauge, timer and folding handle. Add “V” to end of part num-ber for 240 VAC option. Dimensions: HxWxD 6” x 7” x 8.5” (15.2 cm x 17.8 cm x 21.6 cm); Weight: 8 lbs (3.5 kg). Power: 120 VAC/50-60 hz.

Optional Nickel Plated Brass Roberts Valve

Poly 2-in-1 Combination Valve with Septum Fitting

tBP-102 �Model Description

TBP-102A Gas Sampling Pump Unit (50-500 ccm)

TBP-102B Gas Sampling Pump Unit (100-1,000 ccm)

TBP-102C Gas Sampling Pump Unit (200-2,500 ccm)

TBP-102D Gas Sampling Pump Unit (500-5,000 ccm)

Sampling Pumps

Sample bags come standard fitted with the Poly 2-in-1 Combination Valve and Septum Fitting. Each standard bag has one fitting located near the top center or in the center of the bag. Custom placement available.

Model� (type)

Description - P (poly 2-in-1 combo valve)

- R (Brass Rob-erts Valve)

TB-6- � 6” x 6” (0.6 liter)

TB-7-� 7” x 7” (1.0 liter)

TB-9- � 9” x 9” (2.0 liter)

TB-10- � 10” x 10” (3.0 liter)

TB-12- � 12” x 12” (5.0 liter)

TB-12X15- � 12” x 15” (7.0 liter)

TB-12X17- � 12” x 17” (8.0 liter)

TB-12X18- � 12” x 18” (9.5 liter)

TB-12X19- � 12” x 19” (10.0 liter)

TB-12X21- � 12” x 21” (12.0 liter)

TB-18- � 18” x 18” (16.0 liter)

TB-18X24- � 18” x 24” (25.0 liter)

TB-24- � 24” x 24” (40.0 liter)

TB-24X30- � 24” x 30” (56.0 liter)

TB-30- � 30” x 30” (80.0 liter)

TB-30X36- � 30” x 36” (100.0 liter)

Also available in Black Tedlar® for additional Price.

Gas Sampling Bags

Tedlar® Gas Sampling Bags Are No Longer Available.Please Call Apex For An Alternative Material.



METhOD 0040 SAMPLING EQUIPMENTMethod 0040 is designed, using gas sampling bags, for sampling principal organic hazardous constitu-ents from combustion sources like hazardous waste incinerators. This non-isokinetic method uses a constant or proportional sampling rate dependent upon the extent and variability of the emission flow rate (Method 2). The Apex Instruments Method 0040 Kit (SK-0040) utilizes the VSB2 VersaCase cabi-net, glass lined probe assembly, glassware, coolant reservoir with submersible pump, bag enclosure and umbilical cord for connection to the XC-60 or Model 623 source sampler console.

Method 0040 Kit Includes• VersaCase 2• Probe clamp assembly• Probe Assembly w/ heater & liners • Tedlar® Bag Enclosure (6 gallon/25 liter) & Bags• Heated filter assembly • Glassware• Clamps• Three way valve• Cold Box• Submersible coolant pump• Umbilical cable

Packing List

Qty. Model Description

VG40-CGS Method 0040 Glassware Set

Set Includes:

3 VG-1/18 3-Way Valve with #18 Threads, Inlet and Purge, 8mm Outlet

1 VG-34/18 SuperVOST Coil Condenser, 2” diameter #18 Threads

1 VG-125/18 Knock-out Flask, 125 ml with #18 Threads

2 VG-2/18 Drying Tube, Charcoal Trap with Glass Grit, #18 Threads

13 GA-GL-18B Bored Cap, #18 Threads

2 GA-18T8 TFE Seal Ring, #18/8, 8mm Hole Diameter

10 GA-18T6 TFE Seal Ring, #18/6, 6 mm Hole Diameter

18 TPFA-4-047W TFE Tubing, 1/4” OD, 1/8” ID, per foot

2 TL-7/5 Surgical Tubing, 7/16” OD, 15/16” ID, per foot

1 GA-18C Solid Screw Cap, #18

1 4ET4-PFA Union Tee, 1/4” Tube PFA

Method 0040 Glassware

Sampling Kit forVersaCase (SK-0040)

SK-0040 SK-0040-V



Sampling Kit for Method 7

METhOD 7 NITROGEN OXIDESSAMPLING EQUIPMENTApex Instruments offers two different options to sample for nitrogen oxide emissions. The Method 7 Source Sampling Kit is available for Methods 7, 7A and 7B. The system grabs and collects the sample in an evacuated 2 liter flask containing a dilute solution of sulfuric acid and hydrogen peroxide. Method 7 normally requires the collection of multiple samples at 15 minute intervals.

CK-7a9

CK-7a9-V (220V)

Link to M7C/7D

Kit includes• Clamps • Flasks • Sample frame caddy with probe clamp • Probe assembly • Liners• Valve assembly with squeeze bulb

• Adapters• Evacuation pump• Vacuum Gauge• Temperature controller• Thermometer• Transport case (not shown)

Packing List

E7-B162P (120 Volt)E7-B162P-V (240 Volt)



MERCURY SPARE AND REPLACEMENT PARTS

Model DescriptionM-PCB-DACV3A Populated Printed Circuit Board for Data Acquisition and Control (DAC) for XC-6000EPC, Dual PC-Based Hg ConsolePCB-TC/MUX Populated TC/Mux Board for Use in XC-6000EPC Mercury Console, 8 Type K TC Channels with External Signal

and Moisture Analyzer InputsPCB-LED-HG Board, LED DisplayEL-PCB-MODBUS-1 Board, TCP/IP Modbus InterfaceEL-CAT55FT Cable, Ethernet CAT 5.5 FT (blue)EL-SDCARD A-DATA Speedy 1GB Secure Digital (SD) Flash Card Model SDC-1G0EL-EBR-2310 D-Link Router, IEEE 802.3/3u, IEEE 802.11b/g Wireless-G Broadband Router, Used in Meter Consoles in Storm

Case Enclosure onlyEL-WBR-1310 D-Link Router, WBR-1310 Router - 54Mbps, 802.11g, 4-Port, Used in Meter Consoles in SKB, Environmental EnclosuresGP-C131-11 Pump, BTC Diaphragm Pump, Brushless Motor, 10,000 HR, Max Vacuum 20”HG, 12VDC, 3900 RPM, Max PSIG 24”GP-D737B-2201 Pump Diaphragm Hargrave Replacement Pump for XC-30B and XC-260 Meter ConsolesDGM-AP25-5701 Dry Gas Meter w 5701 Optical Encoder, Metric, Model AP25 with Bushings and FittingsDGM-AP25K Replacement Kit for DGM-AP25-5701 with Optical Encoder & Adapter Plate for Use in Replacing DGM-SK25-5701DGM-APADPT Adapter Plate Kit for DGM-AP25-5701DGMC-3A-LF Pre-test 3 Point Low-Flow (less than 1Lpm) Calibration for Apex Meter Console. 900, 600, 300 ccm TOT4-36X72 Quadrature Pulse Digital Totalizer 36 X 72 DINAK-6000 Deluxe Mercury Audit Kit for Appendix K/Method 30B System Includes: SK25 DGM with 15-pt Calibration, Quadrature

Totalizer, Vaccum Gauge, 4U Black Polyethylene Molded Case, Handheld Type K Thermocouple Simulator with Certificate, Hand-Held Digital Barometer, Digital Thermometer, Vacuum Bottle

QC-ADAPTER-1/4” 1/4” Quick Connect Mercury Audit Kit AdapterEL-670-OA938 AC Fan, 92mm ,115VAC, 50CFMMA4-20SIM Simulator,4-20mA, with Enclosure, Connector, Power Switch, & PotentiometerAWM-4360 Airflow Sensor, Signal Conditioning: Amplified; Flow/Pressure Range: + 6000 sccm (6.0 SLPM); Linear Range 1LPM; Port

Style: Manifold, (Flow Controller)XC-6K-PGMC Programming Cable for XC-6000EPC Automated Mercury Sorbent Trap Metering ConsoleM-AM2312 Valve, 3-Way, .055/.048 Orifice, 12V VSO-1SV Valve, Solenoid, Proportional. Model VSONC-3S11-IC-FO Manifold Mount with Wire Leads and 11.5VDCSP-PSE541-M5 Sensor, Pressure, 0-30” Hg, 1 NPN/PNP Open Collector Transistor Output, 30VDC, 125mA

BARO-A-4V Barometric Pressure Sensor, 600 to 1100 mbar, Temperature Compensated, Amplified OutputM-CBR10A-M Electrical Breaker, 10A, Panel Mount Magnetic Type Circuit Breaker Rocker Switch, 10 Amp. Horizontal Mount.

Typically Used in 120V Consoles as Probe/Oven Breaker SwitchM-CB15A-M Electrical Breaker, 15A, Panel Mount Magnetic Type Circuit Breaker, 15 Amp. Typically Used in 120V Consoles

as Main BreakerD-60A Power Supply, 5V@6A, 12V@4AEL-P1082-031 Connector, A TO B USB, Panel MountEL-TL5242W Memory Backup Lithium Batteries 3.6V 2.1Ah Battery PackPCB-BATTERY Battery Interface Board with Short-Term Capacitor Backup for Use with XC-6000 DAC BoardTC-PJK ThermoCouple Jack, Type K, Panel, Snap-InAM-T3107000 C16-1 Series Amphenol Circular Connector. High Grade Plastic for Harsh Environmental Conditions.

Panel Mount Straight Female Slots, 7 Slot (6 + Ground (First Mate/Last Break)AM-T3108 C16 Amphenol Circular Connector, 4 Pin (Cable Straight Male), Probe / Trap Heater Power Connection, Console SideAM-T3109 C16-1 Amphenol Circular Connector, 4 Socket (Cable Straight Female), Probe / Trap Heater Power Connection, Probe SideXC-6K-MANI Manifold Subassy, XC-6000EPC - Service Replacement Manifold Subassembly Includes Vacuum Sensor,

Mass-Flow Sensor, 2-Way Manifold Valve, Proportional Valve, Stainless Steel Hose Barb Fitting. AssemblyCalibration Data to be Provided with this Unit.

DIF-N70 Disposable In-Line Filter, Nylon Housing with 1/4” Tube Stubs, 95%+ Efficiency for 0.1 Micron

CONSOLE REPLACEMENT AND SPARE PARTS



CONSOLE

M-PCB-DACV3A

EL-PCB-MODBUS-1

EL-WBR-1310

TOT4-36X72Quadrature Pulse Digital Totalizer36 X 72 DIN.

Populated Printed Circuit Board for Data Acquisition and Control (DAC) for XC-6000EPC, Dual PC-Based Hg Console.

PCB-LED-hGBoard, LED Display.Board, TCP/IP Modbus Interface.

EL-EBR-2310D-Link Router, IEEE 802.3/3u, 11b/g Wireless-G Broadband Router, Usedin Meter Consoles in Storm CaseEnclosure only.

D-Link Router, WBR-1310 Router - 54Mbps, 802.11g, 4-Port, Used in Meter Consoles in SKB, Environmental Enclosures.

DGM-AP25-5701

DGM-APADPTAdapter Plate Kit for DGM-AP25-5701.

Dry Gas Meter w 5701 Optical Encoder, Metric, Model AP25 with Bushings and Fittings.

$404.00

PCB-TC/MUX

EL-SDCARD

Populated TC/Mux Board for Use inXC-6000EPC Mercury Console, 8 Type K TC Channels with External Signal and Moisture Analyzer Inputs.

A-DATA Speedy 1GB Secure Digital (SD) Flash Card Model SDC-1G0.

GP-C131-11Pump, BTC Diaphragm Pump, Brushless Motor, 10,000 HR, Max Vacuum 20”HG, 12VDC, 3900 RPM, Max PSIG 24” for XC-6000EPC.

DIF-N70Disposable In-Line Filter, Nylon Housing with 1/4” tube stubs, 95%+ Efficiency for 0.1 Micron.

GP-D737B-2201Pump Diaphragm Hargrave Replacement Pump for XC-30B and XC-260 Meter Consoles.

Adapter Plate Sold Separately.



CONSOLE

AK-6000 Audit KitDeluxe Mercury Audit Kit for Appendix K/Method 30B System Includes: AP25 DGM with 15-pt Calibration, Quadrature Totalizer, Vacuum Gauge, 4U Black Poly-ethylene Molded Case, Handheld Type K Thermocouple Simulator with Certificate, Hand-Held Digital Barometer, Digital Thermometer, Vacuum Bottle.

XC-6K-PGMCProgramming Cable for XC-6000EPC Automated Mercury Sorbent Trap Metering Console.

Magnetic Type Circuit Breaker Rocker Switch,10 Amp. Horizontal Mount. Typically Used in 120V Consoles as Probe/Oven Breaker Switch.

EL-TL5242WMemory Backup Lithium Batteries 3.6V 2.1AhBattery Pack.

VSO-1SVValve, Solenoid,ProportionalModel VSONC-3S11-IC-FO Manifold Mount with Wire Leads and 11.5VDC.

EL-670-OA938AC Fan 92mm 115VAC 50CFM.

AWM-4360Airflow Sensor, Signal Conditioning: Amplified; Flow/Pressure Range: + 6000 sccm (6.0 SLPM); Linear Range 1LPM; Port Style: Manifold.

M-AM2312Valve, 3-WAY, .055/.048 Orifice, 12V.

Kit Includes: Secondary Reference MeterDGM-AP25SRD

Thermocouple SimulatorM5C-520

handheld Digital BarometerBAR-4198

36” Thermocouple Type KTCA-36HG

6” Thermocouple Y AdapterTCA-6YHG

handheld WaterproofThermometerDPT-168-NIST

Insulated Ice BathAK-6TH16

DGM-AP25SRD

M5C-520 BAR-4198

DPT-168-NIST

TCA-36hG

TCA-6YhGAK-6Th16

M-CBR10A-MM-CBR15A-M



CONSOLE

26809 AM-SP100A M-SD31

Battery Interface Board with Short-Term Capacitor Backup.

Thermocouple Jack, Type K, Panel, Snap-In.

Mounting Clip for Aluma-Sorb Cartridge. Fan, for Stirling Chiller, 115V, Mechatronics. Temperature Controller, Red LED, Watlow.

BARO-A-4VBarometric Pressure Sensor, 600 to 1100 mbar, Temperature Compensated, Amplified Output.

EL-P1082-031Connector, A to B USB, Panel Mount.

SP-PSE541-M5Sensor, Pressure, 0-30” Hg, 1 NPN/PNP Open Collector Transistor Output, 30VDC, 125mA.

TC-PJKPCB-BATTERY

Ah-610-AHousing, Adsorption, Assembly with 1/4” Fittings and Filled with Aluma-Sorb.

COOLER

M-PSRS7512Power Supply, 75W, 12V, 6 AMP, Input: 100-240VAC.

D-60APower Supply 5V@6A, 12V@ 4A, Meanwell.

M-PCB-REG-ARegulator PCB Assembly 5V, for Use with M-PSRS7512.

COOLER COOLER

COOLERCOOLER COOLER



CONSOLE AND COOLER

AM-T3109C16-1 Amphenol Circular Connector, 4 Socket (Cable Straight Female), Probe / Trap Heater Power Connection, Probe Side.

AM-T3108C16 Amphenol Circular Connector, 4 Pin (Cable Straight Male), Probe / Trap Heater Power Connection, Console Side.

hGh-2T144WReplacement Probe Heater, 2-ft, 575 Watt. (used on all probes, exit end of probe).

PROBE

hGh-4T463WReplacement Probe Heater, 4-ft, 463 Watt.

hGh-5T1650WReplacement Probe Heater, 5-ft, 1650 Watt.

hGh-STRI72Replacement Probe Heater, 6-ft, 2000 Watt.

SSR-330-25Relay, SSRT, 25A 110/240V.

XC-6K-MANIManifold Subassy, XC-6000EPC - ServiceReplacement Manifold Subassembly IncludesVacuum Sensor, Mass-Flow Sensor, 2-WayManifold Valve, Proportional Valve, StainlessSteel Hose Barb Fittings.

hGh-9T838WReplacement Probe Heater, 9-ft, 838W.

hGh-12T1000WReplacement Probe Heater, 12-ft, 1000W.

AM-T3107000C16-1 Series Amphenol Circular Connector.High Grade Plastic for Harsh EnvironmentalConditions. Panel-Mount Straight Female Slots,7 Slot (6 + Ground (First Mate/Last Break).

hEATED UMBILICAL / SAMPLE LINE

PROBE PROBE

COOLER



HGP-STASmall Trap (6mm) Adapter for Mercury Probes. Includes 10MTUR6M-S (with 10mm Nut and fer-rule) and Three 1/4” Ceramic Ferrules.

SGC-J10-30B10-Ft Jumper, For Use with Portable Hg System, Gas Conditioner and Portable Hg Console.

ALUMA-SORBActivated Alumina Dessicant, Highly Ef-ficient Adsorbent with High Porosity and Contact Surface. 1/8” Diameter Beads, 2.5Kg (5.5 LB) Container with 80% Active Alumina (>/= 92%) and 20% Silica Gel.

GA-GL-45SSeal for 1000 ml Bottle.

QC-PMC2QC, Stirling Gas Conditioner, Male, Straight Connector, 1/4” O.D. PTF,1/8” O.D. X.170” I.D. (Used on DrieriteCartridge Outlet/Top) – Threaded Male.

QC-SGC-M2QC, Stirling Gas Conditioner, Straight Con-nector, Ferruless Polytube Fitting, PTF, 1/4” O.D. X.170” I.D. (Heated U-Cord Sample Line to Stirling, High-SO2 Connector) – Tube-Mount Male.

QC-SGC-F4QC, Stirling Gas Conditioner, Female,Coupling Body 1/4” O.D. (Used on Stirling Cooler Sample in Connection).

PROBE

Thermocouple Plug Assembly, Mini,Type K, Male.

TC-SP-KA

SGC-J55-Ft Jumper, For Use in 18U Hg System. For Use with Rack Mount Gas Conditioner in 18U Cabinet.

SGC-J10-6K10-Ft Jumper for Use with Portable Gas Conditioner and Portable Model XC-6000 Hg Meter Console.

HGP-SHIELD-S-EXT-6HGP-SHIELD-C-EXT-6Mercury Sorbent Trap Shields HGP-SHIELD-S-EXT ShieldsStainless Steel Trap Shield Available in 3” or 6” Long x 2” O.D. Diameter. Recommended for short sampling runs, such as those required by Method 30B.

HGP-SHIELD-C-EXT ShieldsC276 Alloy Trap Shield Available in 3” or 6” Long x 2” O.D. Diameter. Recommended for corrosive environments and long continuous sampling runs (5 to 7 days).

HGU-10DJU-Cord Jumper, Hg, Unheated, Dual. 10-Ft Umbilical Cable Jumper (Chiller to Console). Un-heated Sample Lines (1/4”) for Paired Sampling.

HGU-10DJ-SCU-Cord Jumper, Hg, Unheated, Dual. 10 Ft Umbilical Cable Jumper (Chiller to Console). Un-heated Sample Lines (1/4”) for Paired Sampling.

HGU-10DJ-6U-Cord Jumper, Hg, Unheated, Dual. 10 Ft Umbilical Cable Jumper (Chiller to Console). Un-heated Sample Lines (1/4”) for Paired Sampling.



10M-F-TGFerrule, 10MM, Single, Glass Filled Teflon.

10 M-F-TG-DZ(Qty. 12)

PROBE

10MMNU-SNut, 10MM Tube, Stainless Steel.

10MMNU-S-EXTParticulate Shield for 10MM Sorbent Trap Stainless Steel Tube, 3/4” O.D. x 1.25” L with 10mm Nut, Welded.

10MMNU-C-EXTParticulate Shield for 10MM Sorbent Trap, C276 Hastelloy C276 Tube, 3/4” O.D. x 1.25” L with 10mm Nut, Welded.

4NU-SNut, 1/4 Tube, Stainless Steel.

SR-2.625Neoprene Square Ring, 2” I.D. x 2-5/8” O.D. x 3/16” T.K., for Cam-Lock Connectors.

GSB-500SC

SPARES / CONSUMABLE

Sample Bottle, Clear Glass, GL-45 Threaded, 500mL Safety Coated, for Condensate Collec-tion, Used in 16U Shock Mount Rack Chiller.

GSB-250SCBottle, Sample, Clear Glass, GL-45 Threaded, 250mL with Safety Coat Sample Bottle, 250mL, Used in SC-40 Con-densate Collection Ice Bath.

GSB-1000SCSample Bottle, Clear Glass,GL-45 Threaded,1000mL Safety Coated,for Condensate Collection.

GSB-1000SCASample Bottle, Assembled, Clear Glass,GL-45 Threaded,1000mL Safety Coated,for Condensate Collection.Assembly includes GA-GL-45B, GA-GL-45S.



Consoles, MercSampler™ XC-6000EPC ... 4a-5aConsoles, MercSampler™ Firmware.......... 6aConsoles, MercSampler™ Software .......... 6a-7aConsoles, MercSampler™ Laptops ............ 7aConsoles, MercSampler™Cabinet Configurations ............................... 8a-9aConsoles, XC-30B ...................................... 15a 16aConsoles, XC-260 / App. K / Method30B ... 17a-18aGas Conditioners ........................................ 10a-11aGlassware, Midget ...................................... 26aGlassware, Midget Accessories.................. 26a-27aGlassware, PFA Impingers ......................... 23aGlassware & Sorbent Cartridges ................ 11aMethod30B Source Sampling System ........ 15a-16aMethod 6 (SO2) .......................................... 28aMethod 7 Sampling Equipment .................. 34a

MercuryMethod 26................................................... 30aMethod 26 Accessories .............................. 30aMethod 18................................................... 31aMethod 0040 Sampling Equipment ............ 33a MercSampler™ Audit Kit ............................ 12aMercSampler™ Audit Kit Accessories ........ 12aMercury Replacement Parts ....................... 35a-41aMercury Sorbent Traps ............................... 13a-14aProbe Liners, Miniature .............................. 24aProbes, Probe Accessories ........................ 19a-21aSampling Pump Modules............................ 28aSupervost Sampling Equipment ................. 29aBag Sampling Equipment ........................... 32aGas Sampling Bags .................................... 32aVersacase ................................................... 25a

Manometers

www.apexinst.com

919-557-7300 or 800-882-3214Fax: 919-557-7110




Flow, Pressure andtemPerature Catalog

Probes

Inclinometers


[email protected]





[email protected]


FLOW, PRESSURE AND TEMPERATURE MEASUREMENT


MERCURY AND gAS SAMPLINg SYSTEMS & EQUIPMENT

gAS ANALYSIS EQUIPMENT

APPENDIX

INDEX

ACCESSORIES

ISOKINETIC SAMPLINg EQUIPMENT

Accu-Flow, 2-D System ..............................3b - 5b

Pitot Tubes, Modular Pitots Standard Pitot Tubes ..................................6b - 9b

Cam-Lock, FlangesPort Adapters & Packing Glands ..........10b, 11b

Orifice Flow Meters, Inclinometers .............12b, 13b

Transducers / Transmitters Handheld Digital Manometers ...............14b, 15b

Air Velocity Kits, Liquid Manometers Magnahelic Gauges, Anemometers ...........16b, 18b

Thermometers, Humidity, Dew-Point Meters .......................................19b, 20b

Rubber Bushings, Thermocouple Plugs and Jacks .........................................21b

Flow Pressure & Temperature Index ..........22b

Appendix ...................................................23b





Flow, Pressure &teMPerature MeasureMent

Sampling Location - US EPA Method 1 is performed to locate an appropriate sampling location to complete a velocity or particulate traverse. The sampling locations must meet certain criteria to be valid such as, the duct diameter size and the sampling location relative to flow disturbance locations to ensure laminar, non-cyclonic, flow in the stack.

Velocity Measurement - US EPA Method 2 is performed to determine the average stack gas velocity from measurement of the gas density and average velocity head using Type “S” (Stausscheibe or reverse type) pitot tube. Apex Instruments manufactures and guarantees Type “S” pitot tubes in accordance with the Method 2 design specifications. However, calibration is not standard with purchase of pitot tubes. Apex Instruments offers calibration equipment and services. A variety of materials, sizes and configurations are available. The most common are constructed from either 1/4 inch or 3/8 inch OD Stainless Steel or Alloy 600 tubing.

The Type “S” Pitot tube is constructed from two formed tubes with each leg or port on the same plane but facing opposing directions. The theory is based on when the pitot is faced into the gas stream flow the pressure difference between the two ports equates to the velocity pressure, DP. This differential velocity pressure is measured with devices, such as liquid manometers or electronic pressure transducers.

Type “S” Pitot Tube Design Advantages:

• Large sensing openings resist plugging in particulate-laden and saturated gas streams• Compact design fits easily in sampling ports• Maintains calibration in harsh environments• High differential pressure readings are beneficial in low velocity gas streams• Suitable for determining cyclonic flow and measuring yaw angle of the velocity vector• Economically priced

3b www.apexinst.com 800-882-3214 /919-557-7300

FLOW, PRESSURE AND TEMPERATURE MEASUREMENTFLOW, PRESSURE AND TEMPERATURE MEASUREMENT

Prototype Units Available for Trial Basis

Call Toll Free: 1.800.882.3214Email: [email protected]

NEW Product in DevelopmentAccu-Flow 2-d MEASuREMENT SYSTEMThe Apex Accu-Flow Measurement System is used for performing EPA Method 2G. The system uses a two-dimensional 3-hole prism-shaped pitot for accurately measuring flow rates for angular non-axial flow. This system provides a way for testers to improve the measurement of volumetric flow rate under cyclonic flow conditions found in some stacks and ducts. Multiple probes reduce the time for the flow Audits, therefore saving money by not operating at undesirable loads. Oversized sensor ports reduce plugging. The 1/4” pressure lines have quicker response and are less likely to leak than standard 1/8” lines.

Save Time and Money...Use up to 8 Probes Simultaneously

Key Advantage for the Source:1.) Save money reporting lower emissions.2.) With multiple probes, the time for Audits can be drastically reduced, thereby saving more money by not operating at undesirable loads.

Key Advantage for the Tester:1.) Easy to use, rotate-to-null and record the yaw angle and P2.) Variant of Method 23.) Simple calibration, similar to S-Type4.) Automated calculations and data records5.) Use 1 to 8 probes, simultaneously6.) Easy-to-use intuitive software for your laptop7.) Decrease test time and minimize errors

Apex 2D Accu-Flow will save time and money as well as provide more accurate certifiable results.

Key Features:Since all of the sensors are mounted on the probe, accurate, stable readings can be obtained immediately. The larger ports reduce potential plugging. 1/4” pressure lines provide quicker response and are less likely to leak than standard 1/8” lines.(continued on next page).

2-d Pitot ExtensionSize: 8’, 2” o.d.

(32PTX-8)

4”/ 6” Flange Adapterwith 12” extension

(PF46XT32S)

Accu-FlowSoftware

2-d Pitot (2dPT2)

2G u-cord(2G-uc-o)

Pod Interface Module

(2G-PM-o)

Probe Interface Module

(2G-Pod)

4b 800-882-3214 /919-557-7300 www.apexinst.com

Flow, PRESSuRE ANd TEMPERATuRE MEASuREMENT

Probe Interface Module / 2g-pod

Easy-To-use, Intuitive SoftwareThe operation software, hosted on a portable laptop computer, will allow the user to perform Method 2G (2-D) testing. software includes:• Number of probes used• Number of ports• Total number of traverse points to be sampled• Record differential pressure, flow yaw angle, stack temperature, static pressure and barometric pressure.

Accu-Flow Software(Included in 2G-Pod)

Product Description

2DPT2 2-D Pitot, 2 hole prism-shaped tip with 1’ sheath supplied with Type K thermocouple, 1/4” tube unions, 34” Long.

PT-CAL-2D Method 2G, 2-D pitot calibration (wind tunnel), 60 and 90 fps, yaw angle offsets determination.

32PTX-6 2-D Pitot Extension, 6’, 2” diameter sheath, split collar clamp with 1” ID.

32PTX-8 2-D Pitot Extension, 8’, 2” diameter sheath, split collar clamp with 1” ID.

2G-UC-30 30’ 2G cable with 7 pin, circular connectors.

2G-UC-60 60’ 2G cable 7 pin, circular connectors.

2G-UC-90 90’ 2G cable 7 pin, circular connectors.

2G-POD Method 2G POD Contains 2 x 5” Pressure Transducers,1 x 10” Pressure Transducer, 1 Digital Inclinometer, Type K TC Transmitter, Barometric Pressure Sensor plus Umbilical Connector, 2” Tube Clamp, 5 Barb Connectors, 1 TC Jack. Also includes AccuFlow Software, Connects to laptop via USB, 2G-POD power and transmits data over current-loop connection.

2G-PM1 2G Single POD Interface Module contains USB HUB and current-loop transmitter for connecting 2G-POD to a single laptop.

2G-PM4 2G MULTI (4) POD Interface Module contains USB HUB and current-loop transmitters for connecting up to 4 2G-PODs to a single laptop.

2G-PM8 2G MULTI (8) POD Interface Module contains USB HUB and current-loop transmitters for connecting up to 8 2G-PODs to a single laptop.

2-d Flow ModulAR SYSTEM coMPoNENTS

2-d PIToT (2dPT2)

2-d PitotThe new Apex Instruments 2DPT2 Pitot is capable of measuring the yaw velocity angle of nonuniform disturbed air flows. The yaw angle is determined directly by rotating the pitot to null the pressure across a pair of symmetrically placed ports on the pitot head. The yaw angle is measured with a re-mote inclinometer attached to the probe extension and digitally recorded. The average gas volumetric flow rate in the stack or duct is then determined from the average near axial velocity. 2-D Pitot, 2-Hole Prism Shaped with 1” Sheath Supplied with 1/4” tube connections.

2dpT2

dHM28-10

Handheld digital Manometer• Ideal for Auditing Pressure Sensors• Traceable Cert.

• 0-10” H2O• Resolution 0.001”

dHM28-10

Pendulum Style InclinometerEasy-to-use, hand-held Pendulum Style Inclinometer. 1/10deg accuracy: Includes plastic case.. The dial is 2.6”dia. with vernier divisions of 1/10deg. Height is 3.6”, width is 3.1”, wt :3.6oz.

INC-A300

Inclinometer

ProbeInterface Module

2-d calibrationApex Instruments 2-D Pitot Tube must always be cali-brated before initial use. Recalibration is also required either within 12 months of its first field use or after 10 field tests, whichever occurs later. Additionally the 2D pitot shall be is recalibrated before it is used again. Method 2G, 2-D Pitot Calibration (Wind Tunnel), 60 and 90 fps, yaw angle offset determination.

pT-CAL-2d


2g-pM12g-pM42g-pM8


Method 2G POD Contains 2 x 5” Pressure Transducers,1 x 10” Pressure Trans-ducer, 1 Digital Inclinometer, Type K TC Transmitter, Barometric Pressure Sensor plus Umbilical Connector, 2” Tube Clamp, 5 Barb Connectors, 1 TC Jack.



3-d Flow MEASuREMENT SYSTEMThe Apex Instruments MC-3D52 3-D Flow Measurement Console is used in conjunction with the 3-D Pitot to determine velocity pressure, and the yaw and pitch angles of the flow velocity vector in a stack or duct according to U.S. EPA Method 2F (the determination of stack gas velocity and volumetric flow rate with three-dimensional probes). This console features stable and reliable differential pressure transducers for the most demanding of stack testing conditions. A convenient blowback pump, quick connects, temperature display and all voltage outputs are available for easy connection to your data acquisition system.

SK-3d52...$8,055.00

classic Model Mc-3d52

Meter Console Specifications (MC-3D52):Stack Temperature: Type-K Thermocouple.Velocity Pressure: (P1-P2) Range 2.5” H2O.Yaw Null: Bidirectional (P2-P3) Range 2.5” H2O 2.5 Bi.Pitch Range: Bidirectional (P4-P5) Range ±2.5” H2O 2.5 Bi.Yaw Angle Range: Quadrature Pulse Output, 180° (static >360°).output connector: 9 pin D-Sub connector (all outputs are voltage based).Probe Sensor Inclinometer and Digital Indicator.

Product DescriptionMC-3D52 Digital 3-D Flow Measurement Console Digital Displays for temperature, velocity pressure, pitch pressure, yaw angle.3DPT2 3-D Pitot, 5 hole prism-shaped tip with 2’ sheath supplied with five 1/8” to 1/4” tube unions.PT-CAL-3D 3-D Pitot Calibration (Wind Tunnel), 60 and 90 fps, pitch from -30 to 30° degrees32PTX-4 3-D Pitot Extension, 4’, 2” Diameter Sheath, Split Collar Clamp with 1” ID.32PTX-5 3-D Pitot Extension, 5’, 2” Diameter Sheath, Split Collar Clamp with 1” ID.32PTX-6 3-D Pitot Extension, 6’, 2” Diameter Sheath, split collar clamp with 1” ID.32PTX-8 3-D Pitot Extension, 8’, 2” Diameter Sheath, split collar clamp with 1” ID.3DCALC1.0 3DCalc Method 2F Data Reduction Spreadsheet (MS Excel Workbook), with calibration DDL file and Excel Macro Link.U-3D-60 U-Cord 60 ft includes 5 pressure lines with 1/4” stainless steel quick connects, signal cable for inclinometer, 1 type K thermal couple extension.INC-S6-50 Inclinometer, S6 sensor, 360 degrees with 2” probe clamp, quadrature pulse output.

3-d Flow ModulAR SYSTEM coMPoNENTS

3dPT45 HolE PIToT wITH 4

FT. SHEATH PF-346XT32SuNIVERSAl PoRT FlANGE

w/EXTENSIoN

32M/32F-BBRASS BuSHING

(BoREd)

INc-AT2-50INclINoMETERATTAcHMENT

*PRoBE EXTENSIoN ASSEMBlY

MAGNEHElIc +/-.5” GAuGE

ANd BRAcKET

cloSE-uP dPT45 HolE PIToT

Magnehelic Gauge:Magnehelic Gauge, +-.5 INWC Differential.MAG-2301...$100.00

Magnehelic Bracket:Magnehelic Mounting Bracket.MAG-2d-BK...$40.00

optional Accessories:



Type-S Pitot Tubes are used to measure the gas velocities. When the pitot is faced into the gas stream, flow and the pressure difference between the two ports equates to the velocity pressure. This differential velocity pressure is measured with liquid manometers or electronic pressure transducers.Baseline coefficient value is 0.84. Wind tunnelcalibration services are available upon request.

PITOT TUBES

Type-S Pitot Tube Design Advantages:• Large openings resist plugging in particulate laden and saturated gas streams.• Compact design fits easily in sampling ports.• Maintains calibration in harsh environments.• High differential pressure readings are beneficial in low velocity gas streams.• Suitable for determining cyclonic flow and measuring yaw-angle of the velocity vector.• Economically priced.

Other Lengths Available

U.S. EPA Method 1 specifies appropriate sampling locations for conducting a velocity or particulate traverse. The sampling locations must meet certain criteria to be valid. (ie., duct diameter and the sam-pling location, relative to flow disturbance locations to ensure laminar, non-cyclonic, flow in the stack.)Apex Instruments manufactures Type-S pitot tubes in accordance with the Method 2 design specifications. A wide variety of materials, sizes and configurations are available. The most common are constructed from either 1/4” or 3/8” OD stainless steel or Alloy 600 tubing.

-� OptionsTF Stack Thermocouple 2” Back Flush

TO Stack Thermocouple with 3/4” Offset

16 1” Oversheath

M Pitots with Modular Pitot Tip, 1/4” Tubing

MS Pitots with Staggered Pitot Tips

MO Modular Pitot Tip with Offset

Pitot Assembly Options



Call for Additional Information and / or Pricing on C276 Alloy 600. Stainless Steel

Type-S Pitots are Rated upto 1200OF and C276 and Alloy 600

Type-S Pitots are Rated up to 1800OF.

MOST POPULAR SIzESstainless steel type-s Pitot tube

Constructed from 1/4” Stainless Steel

Product Base TF TFR 16 TF16 TFR16

4PT-3

4PT-4

4PT-5

4PT-6

4PT-7

4PT-8

4PT-9

4PT-10

4PT-11

4PT-12

stainless steel type-s Pitot tube

Constructed from 3/8” Stainless Steel

Product Base TF TFR 16 TF16 TFR16

6PT-3

6PT-4

6PT-5

6PT-6

6PT-7

6PT-8

6PT-9

6PT-10

6PT-11

6PT-12

stainless steel type-s Pitot tubeConstructed from 1/4” Stainless Steel Tubing (Pitot Lines), w/ Modular Pitot Tip (3/8” diameter Stainless Steel Tubing)2” Oversheath

Product 32M TF32M TFR32M

6PT-3

6PT-4

6PT-5

6PT-6

6PT-7

6PT-8

6PT-9

6PT-10

6PT-11

6PT-12

Product DescriptionPG-24T 1 1/2” Oversheath Packing Gland, Steel Body, 1 1/2” MNPT, TFE

Packing

PG-32S 2” Oversheath Packing Gland, Stainless Steel Body, 2” MNPT, PTFE Ferrule Included

12MTC12-B 3/4” Packing Gland for Pitot with 3/4” Oversheath, Includes Nylon and Brass Ferrules, Brass

12MTC12-S 3/4” Packing Gland for Pitot with 3/4” Oversheath,Includes Nylon and Ferrules, Stainless Steel

16MTC16-B 1” Packing Gland for Pitot with 1” Oversheath, Includes Nylon and Brass Ferrules, Brass

16MTC16N-S 1 inch Packing Gland, for Pitot with 1 inch Oversheath, Includes Stain-less Steel Ferrule

16MTC16N-SF 1 inch Packing Gland, for Pitot with 1 inch Oversheath, Includes Nylon and Stainless Steel Ferrule 16F-N, 16MTC16-S

12F-GR 3/4” Graphite Ferrule, Alternative Packing for 16MTC16

16F-GR 1” Graphite Ferrule, Alternative Packing for 16MTC16

PACKINg gLANDS

Packing glands

Cam-Lock Packing glands

Packing glands

Link to Flanges

Call foradditional Information





PITOT TUBE EXTENSIONS TELESCOPIC TYPE “S” PITOTApex Instruments Telescoping Pitot Probe allows the versatility of traversing larger stacks with optional telescoping ranges whileproviding the ability to package this probe in a compact container. The design incorporates a pitot tube with 1” OD oversheathconnected to a 2” OD extension (32PTX- ) with adjustable clamp. Rigid or flexible tubing connections are available. 3/8” ID PFAwith stainless steel overbraid is recommended. PFA or glass insulated Type-K thermocouples with overbraid are available.Varying pitot tube lengths are available. Please call for details.

length in mm

Product DescriptionMPT-6-133 Replacement Type-S Modular Pitot Tip for Oversheath Probes,

33mmL

MPT-6-181 Replacement Tip for Standard Method 5 Pitot, 181 mmL

MPT-6-218 Extended Pitot Tip for SFA-47, 218 mmL

MPT-6-252 Extended Pitot Tip for PM10 and SFA-47, 252mmL

MPT-6-320 Extended Pitot Tip for SFA-190, SFA-300 and SFA-2590, 320mmL

MPT-6-421 Extended Pitot Tip for PM10-2.5 and SFA-47, 421mmL

STAINLESS STEEL MODULAR PITOT TIP

Product Description

PTB-3 Modular Pitot Body, (without tip) 3/8” Tube, Pistol Grip, 3’ Length

PTE-2 2’ Modular Pitot Extension, 3/8” Tube



MODULAR PITOT COMPONENTS

MODULAR PITOTSThe unique design of the Apex Modular Pitot Tip reduces the collection of water droplets in the pitot lines. The lower tube is self-draining while the offset in the upper tube acts as water trap. The water can be easily cleared by tilting the tip or by back purging.

Product Description4SC4-S Stainless Steel Tube Union, 1/4”

4TUR6-S Stainless Steel tube end reducer; 3/8” tube union to 1/4” tube stub

6RU4-S Stainless Steel reducing tube union; 3/8” to 1/4”

6SC6-S Stainless Steel tube union, 3/8”

QC-M4-SS 1/4” Quick Connects

QC-M6-SS 3/8” Quick Connects

STAINLESS STEEL UNIONS AND QUICK CONNECTS

Order unions and quick connects separately



STANDARD PITOT TUBE FOR METHOD 2CThis Pitot tube is custom made to specifications outlined in US EPA Method 2C. Modified hemispherical-nosed pitot of Method 2C features a shortened stem and enlarged impact and static pressure holes. This pitot is useful for saturated gas streams when “back-purging” is ineffective. Pitot coefficient: 0.99 unless calibrated.

Product Description

PT2C-24 24” Standard Pitot, Stainless Steel, Method 2C




STAINLESS STEEL PITOT

3-D PITOT CALIBRATION (PT-CAL-3D)All 3-D pitot tunes must be calibrated before use. Re-calibration is also required either within 12 months of its first field use after its most recent calibration or after 10 field tested, whichever occurs later. In addition, whenever there is visible damage to the 3-D head, the pitot shall be re-calibrated before it is used again.

5 Hole Prism Shaped with 4

foot Sheath

2-DIMENSIONAL PROBE (3-HOLE PITOT)The Apex Instruments 2-Dimensional Probe is used in Method 2G for measuring the velocity pressure and the yaw angle of the flow velocity vector in a stack or duct using measurements and a determination of the stack gas density, the average near-axial velocity of the stack gas is calculated. The rear-axial velocity of the stack gas accounts for the yaw, but not the pitch component of flow. The average gas volumetric flow rate in the stack or duct is then determined from the average near-axial velocity. The Inclinometer is used for determination of the calibrated yaw offset. The pitot is designed to be insert-ed into our 2 inch diameter probe extension. The pitot tube must be calibrated in accordance with Method 2G prior to use. (2-D Calibration....see page 4).

Pt-Cal-3d

3-D MODULAR FLOW SYSTEM

System Includes: Digital 3-D Flow Measurement Console, 3-D Pitot, 5 Hole Prism Shaped with 4 ft., Sheath, 3-D Pitot Extension, 2” Diameter Sheath, 1/4” TFE Lines - 10 ft., Universal Probe Extension Flange Fits 3”,4”, & 6” Ports, 2” Bored Brass Bushing, 2” MNPT with 2.035 Bore, 3-D Pitot Calibration (Wind Tunnel), Remote Inclinometer Sensor, 60 ft., 3-D U-Cord.

3-D PITOT (5-HOLE PITOT)The Apex Instruments 3-D Pitot is capable of measuring yaw and pitch of nonuniform flows. The yaw angle is determined directly by rotating the pitot to null the pressure across a pair of symmetrically placed ports on the pitot head. The yaw angle is measured with a remote inclinometers attached to the probe extension and digitally displayed on the console.The pitch angle is calculated using probe specific calibration curves. The average gas volumetric flow rate in thestack or duct is then determined from the average axial velocity.

2-D MODULAR FLOW SYSTEMProduct Description

2DPT2 2-D Pitot, 2 hole prism-shaped tip with 1’ sheath supplied with Type K thermocouples, 1/4” tube unions, 34” Long. PT-CAL-2D Method 2G, 2-D pitot calibration (wind tunnel), 60 and 90 fps, yaw angle offsets determination. 32PTX-6 2-D 2-D Pitot Extension, 6’, 2” diameter sheath, split collar clamp with 1” ID. 32PTX-8 2-D Pitot Extension, 8’, 2” diameter sheath, split collar clamp with 1” ID. 2G-UC-25 25’ 2G cable with 7 pin, circular connectors. 2G-UC-50 50’ 2G cable 7 pin, circular connectors. 2G-UC-100 100’ 2G cable 7 pin, circular connectors. 2G-MPDI Method 2G probe interface module, contains 2 x 5” pressure transducers, 1 x 10” pressure transducer, 1 digital Inclinometer, type-K thermocouple transmitter, barometric pressure sensor plus umbilical connector, 2” tube clamp, 5 barb connectors, 1 Thermocouple Jack also includes interface module, connects to laptop via USB, powers 2G-POD and Transmits data over current-loop connection. (2G-POD multi-pod interface module contains USB Hub and 4 current loop transmitters for connecting up to four 2G-PODs to a single laptop.)2G-SW Accu-Flow Software, included with 2G-POD. Includes worksheets for Methods 1-4 and assists user in collecting data points for Methods 2F / 2G / 2H. 2DCALC1.0 2DCalc Method 2F data reduction spreadsheet (MS Excel Workbook), with calibration DDL file and Excel Macro Link.

Product Description

SK-3D52 Method 2F Digital 3-D Flow Measurement System. CALL FOR DETAILS



Product DescriptionPF-346T32S 2” FnPT, Universal Pipe Flange Reducer, Fits 3”, 4”, 6” Ports, SSPF-346XT32S 2” FnPT, Universal Pipe Flange Reducer with 12” Extension, Reversible, Fits

3”, 4”, 6” PortsPF-346T32S 2” FnPT, Universal Pipe Flange Reducer, Fits 3”, 4”, 6” Pipe Flanges, Stain-

less SteelPF-4/6U32-S Universal Pipe Flange with 2” FnPT, Fits 4” and 6” PortsPF-4/6UB-S Universal Pipe Flange, 4”/ 6” Port, 2.675 Bored Center, SSPF-4/6UCLS Universal Flange, 4”/ 6” w/ 2-1/2” Cam-Lock

UNIVERSAL PIPE FLANgE & FLANgE REDUCERS

CAM-LOCK, FLANgES, PORT ADAPTERS & PACKINg gLANDS

Flange & Cam-Locks

Threaded Pipe Flanges

REDUCING FLANGES

Product DescriptionPF-3/40CLS 3” Bored Pipe Flange, 150 lb pattern, 2.670 Bored

Diameter, with size 40Cam-lock Connector, Stainless Steel

PF-3CS 3” Pipe Flange, 150 lb FF Pattern, Bored with Threaded Coupling, Stainless Steel

PF-4BS 4” Bored Pipe Flange, 2.67” RF, 150 lb Pattern, Stainless Steel

PF-6BS 6” Bored Pipe Flange, 150 lb Pattern, 2.670 Bored Diameter, Stainless Steel

PF-4CLS 4” Bored Pipe Flange, 2.67” RF, 150 lb Pattern, Stainless Steel

PF-4CS 4” Bored Pipe Flange, 150 lb FF Pattern with Threaded Coupling, Stainless Steel

PF-4/40CLS 4” Bored Pipe Flange, 150 lb pattern, 2.67 Bored Diameter Welded Cam and Groove Connector (For Probes without Pitot Option, with Tube Outer Sheath) with size 40 Cam-Lock Connections, Stainless Steel

PF-6/40CLS 6” Bored Pipe Flange, 150 lb pattern, 2.67 Bored Diameter welded Cam and Groove Connector (For Probes without Pitot Option, with Tube Outer Sheath) with size 40 Cam-Lock Connections, Stainless Steel

PF-6/48CLS 6” Bored Pipe Flange, 150 lb Pattern, Bored Inside Diameter, with size 48 Cam-lock Connector (For Use with Pitot Version Mercury Probe with Pipe Oversheath),Stainless Steel

PF-6CLS 6” Bored Pipe Flange, 150 lb pattern, 2.670 Bored Diameter, with Cam-lock Connector, Stainless Steel

BORED PIPE FLANgE

Product DescriptionPF-3BLS 3” Pipe Flange, 150 lb RF, Blind, Raised Face, 7-1/2” OD, 6” Bolt Circle Diameter,

Stainless SteelPF-4BLS 4” Pipe Flange, 150 lb Pattern, Blind, Raised Face, 9” OD, 7-1/2” Bolt Circle

Diameter, Stainless SteelPF-6BLS 6” Blind Pipe Flange, 150 lb Pattern, 11” OD, 9-1/2” Bolt Circle Diameter,

Stainless Steel

BLIND PIPE FLANgES

Product DescriptionPF-2T 2” Threaded 304 Flange, 6” OD, 4-3/4” Bolt Circle Dia. Carbon SteelPF-3T 3” Threaded Pipe Flange, 150 lb., Pattern, 7-1/2”

OD, 6” Bolt Circle Diameter, Carbon SteelPF-4T 4” Threaded Pipe Flange, 150 lb., Pattern, 9” OD,

7-1/2” Bolt Circle Diameter, Carbon SteelPF-6T 6” Threaded Pipe Flange, 150 lb., Pattern,

11” OD, 9-1/2” Bolt Circle Diameter, Carbon Steel PF-3TA 3” FnPT Threaded Pipe Flange, 150 lb., Pattern,

7-1/2” OD, 6” Bolt Circle Diameter, Cast AluminumPF-4TS 4” FnPT Threaded Pipe Flange, 150 lb., Pattern,

9” OD, 7-1/2” Bolt Circle Diameter, Stainless SteelPF-6TS 6” FnPT Threaded Pipe Flange, 150 lb., 11” OD,

9-1/2” Bolt Circle Diameter, Stainless Steel PF-3T16 3” Threaded Pipe Flange, 150 lb., Pattern, 7-1/2”

OD, 6” Bolt Circle Diameter, Carbon SteelPF-4T16 4” Threaded Pipe Flange, 150 lb., Pattern, 1” FnPT,

9” OD, 7-1/2” Bolt Circle Diameter, Stainless SteelPF-4PG38S 2” Pipe Flange, 150 lb Pattern, 6” OD, 4-3/4” Bolt Circle Diameter, with 2” Pipe

Packing Gland, Stainless SteelPF-6PG38S 6” Pipe Flange, 150 lb., Pattern, 11” OD, 9-1/2” Bolt Circle Diameter, with 2” Pipe

Packing Gland, Stainless Steel

THREADED PIPE FLANgES

PIPE FLANgE

Product DescriptionPFC-2.5S 2.5” Probe Flange Cap Assembly, Consists of 304 Stainless Steel Bevel Seat

Cap and nutPFC-2S 2” Probe Flange Cap Assembly, Consists of 304 Stainless Steel Bevel Seat

Cap and nut

PROBE FLANgE CAP

Product DescriptionPF-4PG38S 4” Pipe Flange, 150 lb Pattern with 2” Pipe Packing Gland (For Use with Probes

with Pitot Option, Pipe Outersheath), Stainless Steel PF-346S Flange Plate with 2-3/8” Hole for 2” Pipe. Fits 3”, 4” & 6” Ports, SSPF-46XT32S 2” FnPT Probe Support with Extension



Product DescriptionPF-346PG38 Packing Gland Flange Fits 3”, 4”, 6”,

Includes Packing Gland for 2” Pipe, Stainless Steel

PACKINg gLAND FLANgE

Bored Bushings Reducing Bushings

Product Description64M/32F-CS Reducing Bushing, 4” MnPT-2” FnPT, Carbon Steel48M/32F-CS Reducing Bushing, 3” MnPT-2” FnPT, Carbon Steel32M/16F-B Reducing Bushing, 2” MnPT-1” FnPT, Brass32M/24F-B Reducing Bushing, 2” MnPT-1.5” FnP, Brass

REDUCINg BUSHINgS

Product Description32M/16B-B Bored Bushing, 2” MnPT X 1.035” Bore, Brass32M/24B-B Bored Bushing, 2” MnPT X 1.535” Bore, Brass32M/32B-B Bored Bushing, 2” MnPT X 2.035” Bore, Brass

BORED BUSHINgS

Packing glands

Cam-LockPacking glands

OversheathPacking glands

PF-4/6UCLS

Pg-32/40CL

PF-4/40CLS PF-6/40CLS

Product DescriptionPG-24T 1-1/2 inch Oversheath Packing Gland, Steel Body, 1-1/2 inch MnPT,

TFE PackingPG-32S 2” Oversheath Packing Gland, Steel Body, 2” MnPT, PTFE

Ferrule includedPG-32/40CL 2” Oversheath Packing Gland, Steel Body, TFE Packing

(for use with PF-40CLS flange) with size 40 Cam and Groove Connector

PG-38/48CL 3” Oversheath Packing Gland, Stainless Steel body, Cam-Lock, For use with Pitot Version Mercury Probes with Pipe Oversheath

OVERSHEATH PACKINg gLANDS

PACKINg gLAND ACCESSORIES

Product DescriptionPG-32F 2” Adapter, Threaded Bevel Seat, #21-2, Custom Bore, 2.125” ID, Used

in PG-32S, Stainless Steel, note: Does not Include nut or Ferrule PG-32nT 2” Adapter, Bevel Seat, #21-2, Custom Bore, 2.125” ID, Welded to PF-

XXX Flange Assembly, Extention, or PC-XXX. note: Does not Include nut or Ferrule

PG-38F 2.5” Custom Threaded Ferrule, Part of PG-38-3Q Packing Gland, Stainless Steel

PG-38RT Thrust Ring, 2.435 ID X 2.875 OD, for PG-38-3Q Packing Gland, Stainless Steel

PG10-4n Pressure Gauge, 0-15 psi, 1/4” nPT, Stainless Steel PG200-4n Pressure Gauge, 1/4” nPT

PACKINg gLANDS FOR PITOTS

Product Description12MTC12-B 3/4” Packing Gland for Pitot with 3/4” Oversheath, Includes nylon

and Brass Ferrules, Brass12MTC12-S 3/4” Packing Gland for Pitot with 3/4” Oversheath, Includes nylon

and Ferrules, SS16MTC16n-B 1” Packing Gland for Pitot with 1” Oversheath16MTC16n-S 1” Packing Gland for Pitot with 1” Oversheath,

Includes Stainless Steel Ferrule16MTC16n-SF 1” Packing Gland for Pitot with 1” Oversheath, includes nylon Fer-

rules, Stainless Steel, and 16MTC16-S12F-GR 3/4” Graphite Ferrule, Alternative Packing for 16MTC1616F-GR 1” Graphite Ferrule, Alternative Packing for 16MTC16

360 DEgREE COMPASS ROSE FLANgE

Product DescriptionPF-346T32A360 Flange with 360 Degree (0-90 Degree X 4) Compass Rose Laser

Engraved. 2” Half Coupling Welded. Fits 3”, 4” and 6” Flanges. Includes Arrow Pointer for 2” Oversheath Probe, Stainless Steel

PF-346XT32S360 Flange with 360 Degree (0-90 Degree X 4) Compass Rose Laser Engraved. 2” Half Coupling Welded. Fits 3”, 4” and 6” Flanges. Includes Arrow Pointer for 2” Oversheath Probe. With Bored Bushings and 2” Diameter Probe Support Extension, SS

Product DescriptionPFC-40S-CL 2.5” nPT 316 with Buckles, Cap Cam with Groove Fitting, Type D,

2.5 inch MnPT, SS

PIPE FLANgE ACCESSORIES

Product Description64RUC32-CS Coupling, Reducer, 4” x 2” FnPT, Carbon Steel48RUC32-CS Coupling, Reducer, 3” x 2” FnPT, Carbon Steel

REDUCINg COUPLINgSReducing Couplings



ORIFICE FLOW METERS

OFM-SERIES ORIFICE FLOW METERS

The OFM-Series Orifice Flow Meters all feature a calibrated, stainless steel critical orifice with two liquid-filled vacuum gauges and stainless steel inline filter. All fittings, including the orifice and filter, are made of stainless steel and include 1/4” tube fitting end connections. These adapters are used with vacuum pumps to provide constant sample flow rates. Orifice sizes range from 4 to 35 providing flow rates from 0.076 Lpm to 6.1 Lpm.

VUA-SERIES LOW FLOW ADAPTERS

The VUA-Series Low Flow Orifice Adapters feature a calibrated, critical sapphire orifice with liquid filled vacuum gauge, brass fittings and inline filter to adapt to Apex Instruments’ isokinetic source samplers for methods requiring low flow sampling. The adapters are used for VOST and Method 6-type sampling. Adapters include 1/2” male and 1/4” female brass quick connects to attach the isokinetic source sampler to the VOST VU-cords. Three adapters are offered to provide approximately 1/2, 1 and 2 liters per minute flow rates. The VUA-575 is used for Method 7C to provide the required flowrate between 400-500cc/min.

Product Description

VUA-561 Low-flow Adapter for Isokinetic Meter Console, ~1Lpm, 1/2” male 1/4” female quick connect, brass


VUA-565 Low-flow Adapter for Isokinetic Meter Console, ~0.5 Lpm, 1/2” male-1/4” female quick connect, brass

VUA-575 Low-flow Adapter (M7C) for Isokinetic Meter Console, ~0.5Lpm, 1/2” male-1/2” female quick connect, brass


Product Description

KFR-4A40SNVT Acyrlic, 0.4-5 Lpm, Stainless Steel, No Valve

KFR-4A44SNVT Acyrlic, 4-50 Lpm, Stainless Steel, No Valve

KMR-3A13SVVT Polycarbonate, 0.1-1.2 Lpm, Stainless Steel, with Valve


KMR-3A14SVVT Polycarbonate, 0.4-5 Lpm, Stainless Steel, with Valve

KGS-SERIES Glass Tube, Rotating Lens, MM Scales or Direct Read Index

KGR-SERIES Glass Tube, standard lens, MM Scales or Direct Read Index

Apex Instruments offers the precision machined acrylic (KFR-Series), molded polycarbonate (KMR-Series), glass tube(KgS-Series), and electronic flowmeters for a variety of applications. Available in precision engineered sizes and scales for a variety of fluids. The millimeter reference or direct read scales can be specified to meet any requirements. NIST traceable calibration certificates are available.

FLOW METERS

KFR-Series - KMR-Series - KgS-Series

Product Description

OFM-K4-14 Orifice Control Flowmeter, In-Line, w/2 liquid Filled Vaccum Gauges, Stainless Steel In-Line Filter & KA-14-SS Orifice, 1Lpm

OFM-K4-4 Orifice Control Flowmeter, In-Line, w/2 Vacuum Gauges, Stainless Steel In-Line Filter & K4-4-SS Orifice, .076LPM

OFM-K4-6 Orifice Control Flowmeter, In-Line, w/2 Vacuum Gauges, Stainless Steel In-Line Filter & K4-6-SS Orifice, .20 lpm


OFM-K4-8 Orifice Control Flowmeter, In-Line, w/2 Vacuum Gauges, Stainless Steel In-Line Filter & K4-8-SS Orifice, .34lpm


OFM-K4-HG Calibration Orifice, In-Line, w/ Vacuum Gauge, Stainless Steel In-Line Filter & Orifice, low flow for mercury system

Other Flow Ranges Available. CALL FOR DETAILS & PRICING.


Other Flow Ranges Available. CALL FOR DETAILS & PRICING.

FLOW METERS (ROTAMETERS)



INCLINOMETERS

The INC-A2T-50 Inclinometer Sensor is designed for measuring the yaw angle of flow in accordance with Method F&G. The standard collar is designed for clamping onto 2” tubing. Remote Inclinometer Sensor, 360 degrees with 2” Tube Clamp and Amphenol Connector has analog voltage output. Alternative clamp sizes are available upon request. This remote sensor is designed to be used with the 3-D flow console, however it can be used with the Remote Digital Display (INC-D205). The inclinometer sensor is connected to the display via our standard 4-pin Signal Cable.

InC-a2t-50

PROTRACTOR / INCLINOMETERThe M5C-4 Protractor/Inclinometer is an ideal tool for measuring cyclonic yaw angles in accordance with Method 2. The machined aluminum frame and integral baseplate provide a light, rigid and ultra precise platform allowing the state-of-the-art sensor to provide unsurpassed accuracy throughout the 360° range. The inclinometer can be securely attached to probe with one of the following mounting brackets.M5C-4

INC-A2T-50INC-D205

Bracket for M5C-4 with 1” Aluminum Clamp.M5C-4-16

Bracket for M5C-4 with 2” Aluminum Clamp.M5C-4-32

Mounting Brackets for M5C-4

PENDULUM STYLE INCLINOMETEREasy-to-use, hand-held Pendulum Style Inclinometer. 1/10deg accuracy: Includes plastic case.. The dial is 2.6”dia. with vernier divisions of 1/10deg. Height is 3.6”, width is 3.1”, wt :3.6oz.InC-a300

Features:• Reliable: 15 years of proven DryCal® performance

• Accurate: Backed by ISO 17025; NV LAP accredited• Portable: Lightweight and impact-resistant• Simple: Quick Start operation and no messy soap solutions

• Streamlined: Bios optimizer software transfers calibration data directly to any windows based PC using built in serial port.

FLOW CALIBRATOR/PISTON PROVER / BIOS Defender 510 and 520 Series are the next generation of DryCal® technology. It is the proven and reliable foundation of all BIOS primary standards, and the basis of our ISO 17025 accreditation by NVLAP of NIST. Available in low, median or high ranges.

Model Description

200-510H Flow Calibrator, Defender 200-510H, High Flow Range, 300ml-30,000ml/min, +/-1% of Reading Volumetric

200-510L Flow Calibrator, Defender 200-510H, Low Flow Range, 5ml-500ml/min, +/-1% of Reading Volumetric

200-510M Flow Calibrator, Defender 200-510H, Medium Flow Range, 50ml-5000ml/min, +/-1% of Reading Volumetric

200-520H Flow Calibrator, Defender 200-510H, High Flow Range, 300ml-30,000ml/min, +/-1% of Reading Volu-metric, Includes Temperature and Pressure Recordings

200-520L Flow Calibrator, Defender 200-510H, Low Flow Range, 5ml-500ml/min, +/-1% of Reading Volumetric, Includes Temperature and Pressure Recordings

200-520M Flow Calibrator, Defender 200-510H, Medium Flow Range, 50ml-500ml/min, +/-1% of Reading Volumetric, Includes Temperature and Pressure Recordings




M5C-4INC-A300

BIOS DEFENDER 510 AND 520 SERIES

FLOW CALIBRATORS

REMOTE INCLINOMETER LED DISPLAY (INC-D205)The INC-D205 Remote Inclinometer Display is designed to be used inconjunction with our INC-A2T inclinometer sensor. The display is a highresolution 3 1/2 digit bright LED process meter. The meter is housed in a sturdy compact metal cabinet with convenient carrying handle. RequiresINC-A2T Sensor and Signal Cable (INC-SC-”length”). SC voltage 120/60Hz.Dimensions: 6” x 7” x 8.5”Weight: 4 lb.

InC-d205InC-a2t-50



Apex Instruments Differential Pressure and Temperature Monitor accurately measures the differential pressure and temperature when used in conjunction with a Pitot Tube and Type-K Temperature Probe. This instrument is for continuous monitoring of stack gas velocities when coupled with a data logger. This compact bench top differential pressure and temperature monitor incorporates a digital manometer display with a temperature display. The connections (power cord, 2 Female 1/4” quick connects, terminal strip and Type-K thermocouple outlet), are located on the back panel of the case; all the readouts and switches are mounted on the front panel. It has a convenient folding handle making this unit easy to transport. Bench top version uses a pressure transducer that is stable and reliable.

DIFFERENTIAL PRESSURE / TEMPERATURE TRANSDUCER DISPLAY

Features:• Digital Pressure Display• Type-K Temperature Display• Voltage Output Signals• Durable Compact Cabinet• Stainless Steel 1/4” Quick Connects• Terminal Strip - Output Signal• 25” Transducer

Specifications: Pressure Range: 0.1”. Temperature Display Accepts Type-K Thermocouple. Resolution 1°C or F; Range: -157 to 1999°F; Supply Voltage +/- 5Vdc; Ratiometeric based 0.25 to 4.0 Vdc, 120V/50-60Hz; Power: 120 VAC/60 Hz;Dimensions: HxWxD 6” x 7” x 8.5”; (15.2 cm x 17.8 cm x 21.6 cm).

TRANSDUCERS/TRANSMITTERS

M-DP-10 TRANSDUCER/TRANSMITTER10 Inch Single Transducer, Gage 0-10 Inch. Populated Printed Circuit Board with One 0-10 “ H2O. Mounted in Plastic Enclosure. 12VDC Supply Required. Sensor Ranges (1, 2.5, 5, 10 and 20) Add “B” for bidirectional.

M-dP-10

THERMOCOUPLE TRANSMITTER4 Channel Thermocouple Transmitter. 4.4 x 2.4 x 1.1 ABS plastic enclosure with terminal blocks. Designed using Analog Devices AD595CQ TC amplifier with cold junction compensation. Low input impedance and +/- 1 degree C accuracy.

M-tC4C

M-DP-10 TRANSDUCER / TRANSMITTER Features:• Temperature Compensated Pressure Transducers• Built into 4.4” x 2.4” x 1.1” Enclosure with Terminal Blocks• Accessible Hose Barbs for Pressure Connections (barbs OD=.174 -.190)• Built-In ESD Protection• 12vdc Power Required from Separate Source• Operating Range of 0-70°C• Relative Humidity Operating Range of 0-95%• Ratio Metric 4vdc Span Output (exact output value is sensor dependent)• On-board Regulated Reference Supply for Pressure Sensors

FOUR CHANNELTHERMOCOUPLE TRANSMITTER Features:• TVS Diodes on TC Input for ESD and Transient Suppression• DC-DC Converter on 12V Power input Providing 1000V Power Surge Isolation• Designed using Analog Devices AD595CQ TC Amplifier with Cold Junction Compensation, Low Input Impedance and +/- 1°C Accuracy• Low Power Consumption (less than 40ma for all 4 channels)• Type K Thermocouple Range Capable

DPT-B1

Product Description

DPT-B1 Differential Pressure and Temperature Transmitter/Display Pressure Range 0-1”

DPT-B2 Differential Pressure and Temperature Transmitter/Display Pressure Range 0-2 “

DPT-B5 Differential Pressure and Temperature Transmitter/Display Pressure Range 0-5 “

TRANSDUCER DISPLAYS

M-TC4CM-DP-10



HAND HELD DIgITAL MANOMETERS

The DP-CALC™ 5825 micromanometer allows you to easily make HVAC pressure measurements. These robust instruments can be used with Pitot probes to measure duct velocity. The high performance DP-CALC 5825 can calculate flow and has data logging capabilities.

dHM-5825

Features:• Measure Differential and Static Pressure from -15 to +15 in. H2O. • Calculates Velocity when used with Pitot Tube • Quick Zero Function Ensures Accurate Readings • Performs Flow Rate Calculations from User-Input Duct Size or K-Factor • Stores 12,700+ Samples and 100 Test IDs • Data Logs with Time and Date Stamp• LogDat2™ Downloading Software

DHM-5825 DIgITAL HANDHELD MANOMETERS

DHM-5825

The DHM28-10 is a precision instrument designed to measure a wide range of pressures to a very high ac-curacy. Features include: measurement in all common pressure ranges, display resolution to .001, differential or relative measurement, two line liquid crystal display, and adjustable auto power off to conserve battery. A certificate of calibration is included with the unit at no additional cost. The DHM28-10 can be used as a secondary calibration standard for your other pressure instrumentation.

dHM28-10

DHM28-10 DIgITAL HANDHELD MANOMETERS

DHM28-10

Features:• Microprocessor Based• Differential Gage, or Absolute• High Accuracy, 0.2%, 0.1%, or 0.5% with Calibration Certificate• Selectable Scales• Resolution to 0.000 of Selected Unit • Input Range; US 0-10” in H2O, Metric 0-2.5 kPa, Overpressure 12.5 kPa (50 in H2O)• Accuracy, ±0.20% Full Scale ±1 Digit• Hold Function• Programmable Display• Memory for up to 964 Readings• Output for Optional Printer or Computer Interface

The DHM-M100 handheld manometer combines form, fit and function to deliver precision pressure measurement for field, plant or lab use. Applicable to leak testing for low pressure gas systems, pressure drop monitoring across filters, monitoring vacuum on condensers or pumps, and verification of CPAP or BIPAP systems for home or hospital settings.

dHM-M100

DHM-M100 MERIAM DIgITAL HANDHELD MANOMETER

DHM-M100

Features:• Lightweight and Ergonomic• Sealed Membrane Type with 4 Dome Style Contact Buttons • Measure Differential - Range 0 to 28.00” H2O • 8 Selectable Engineering Units: Inches of H2O at 20°C, mm of H2O at 20°C, mm of Hg at 0°C, Inches of Hg at 0°C, kPa, mBar, Bar, PSI and User Selectable• English/Metric Units• Accuracy ±0.25% F.S.

Low Cost Hand Held Manometer for Differential Pressure Measurement

• Automatically Powers Off after 20 Minutes of Keypad Inactivity• Stores up to 240 Pressure Measurements• Green Backlight is User Activated Via the Backlight Key• Red Backlight is Automatically Activated During an Error/Over Range Condition• Certificate of NIST Traceability (optional)

Link to Pitots



standard Pitot18 inch Standard Pitot Tube, 5/16 inch diameter Stainless Steel.

160-18

AIR VELOCITY KITSThe M-115AV Air Velocity Kit includes an Inclined Portable Manometer with a range of -.05” to 0.25” H2O with 0 to 0.5” minor scale divisions, standard 12” pitot, hoses and a case. The DP-CALC Manometer can be ordered separately. Cus-tom Kits Available.

DELUXE METHOD 2 PRETEST SURVEY KIT

Features:• 1” Thick Acrylic Plastic Body• Drilled Bore Accurate to ±.0002 inches• Selected Gauge Oil• Adjustable Reflective Chrome Finish• Parallax-Free Reading• Screw Type Leveling Adjustment

CASE withM-115AV KIT

standard Pitot6 inch Standard Pitot Tube, 1/8 inch diameter Stainless Steel.

166-12

Includes all items of the SK-DM2D (Listed Above) with 4 Magne-helic Gauges: 0 to 0.25”H2O, 0 to 2” H2O, 0 to 5” H2O, and 0 to 10” H2O in lieu of digital manometer (English Units).

sK-dM2

DELUXE METHOD 2 MAgNEHELIC KIT

Includes all items of the SK-DM2D (Listed Above) with 4 Magnehe-lic Gauges: 0-.25CM H2O, 0-6 mm H2O, 0-50 mm H2O, and 0-100 mm H2O in lieu of digital manometer (Metric Units).

sK-dM2M

DELUXE METHOD 2 METRIC MAgNEHELIC KIT

INCLINED PORTABLE MANOMETERInclined Portable Manometer with a range of-.05 to 0.25”.

M-115

M-115

DUAL SCALE PORTABLE INCLINED-VERTICAL MANOMETERThe M-400K Air Velocity Kit includes Dual Scale Portable Inclined-Veritical Manometer (M-400G) with an inclined range of 0-1.0” H2O with .01” minor divisions and vertical range of 1 to 10” H2O with 0.10” minor divisions, 18” standard pitot, hoses and case (M-400G Manometer can be ordered separately).

M-400K

Features:• 1 1/4” Thick Acrylic Plastic Body

• 3/16” Bores, Accurate to ±.0002”

• Selected gauge oil

INCLINED/VERTICAL PORTABLE MANOMETERPortable Inclined/Vertical Manometer with a range of 0 to 10.

M-400g

ROLL-UP MANOMETERRoll-Up Manometer, Range 18-0-18”, quick shut off hose barb connections.

M1211-36

M1211-36

The Deluxe Method 2 Pretest Survey Kit contains a modular pitot tip and extension for stacks up to 12’, a digital hand held manometer, thermocouple thermometer, tubing, reducers, unions and flexible thermocouples. The kit is packagein a sturdy, foam-linedcase. Custom kitsavailable. Alternativemanometer optionsavailable upon request.

SK-DM2D KIT & CASE

• Ground Glass Bubble Level

• Parallax-Free Reading

• O-Ring sealed Fluid Level plunger Adjustment

sK-dM2d

M-400g

160-18

CASE withM-400K KIT



MAgNEHELIC gAUgES

MAG-2000-00 0-1/4” H2O

MAG-2000-0 0-1/2” H2O

MAG-2001 0-1” H2O

MAG-2002 0-2” H2O

MAG-2005 0-5” H2O

MAG-2010 0-10” H2O

A-369 Stand, Aluminum, 5 1/2” Tall

MAG-2000-6MM 0 to 6 mm H2O

MAG-2000-25MM 0 to 25 mm H2O

MAG-2000-50MM 0 to 50 mm H2O

MAG-2000-100MM 0 to 100 mm H2O

Easy to read 4” dials indicate gas pressures; positive, negative or differential. The gauges have a + 2% full scale accuracy and include simple, frictionless magnehelic magnetic movement. They are highly resistant to shock, vibration and overpressure.

STANDARD MEASURE METRIC MEASURE

ANEMOMETERS

Hot Wire Anemometer with two miniature glass-bead thermistors provides greater precision at low air velocities. Telescope probe expands from 9.2 inches to 3 feet for hard-to-reach places. Eliminate friction errors caused by rotating vanes with this no-moving parts. Serial RS-232 output allows anemometer to be connected to a computer or data logger for monitoring results. Memory function recalls the highest and lowest readings. A data hold button freezes the display to capture readings. Unit is supplied complete with dual thermistors probe, 40-inch cable, carrying case, Traceable® Certificate, 6 AAA batteries, and serial computer output.

an-4330

LCD display reads airflow from 40 to 7800 feet per minute and 0.20 to 40.00 meters per second. Select 2 or 16-second averaging. Memory recalls highest/lowest readings for any time period, and a HOLD switch freezes the display to capture a reading. The sensing probe can be handheld or used with the supplied extension wands to increase reach by 5 feet. Vane is aluminum and case is ABS plastic.

an-4090

HOT WIRE ANEMOMETER

Features:• Range is 40 to 7800 Feet Per Minute and 0.20 to 40.00 Meters Per Second• Resolution is 1 Foot Per Minute or 0.01 Meter Per Second• Accuracy is ±1%• Extension Wand Increases Reach by 5 Feet• Supplied with Two AA Alkaline Batteries• Dimensions: HxWxD 3” x 7” x 3/4” ( 7.6 cm x 17.8 cm x 1.9 cm); 8 oz (.23 kg).

Features: • Five Ranges Anemometer Accuracy is ±(1% full scale + 1 digit)• Temperature Accuracy is ±0.8°C (1.5°F)• Dual thermistors Probe with 40” Cable• Dimensions: HxWxD 7” x 3” x 1.25” (17.8 cm x 7.6 cm x 3.2 cm); 9.5 oz ( .23 kg)

AN-4090

AN-4330

MAg-2000-00



BAROMETERSHandheld Digital BarometerHandheld Digital Barometer measures altitude, temperature, and barometric pressure. Also has a stopwatch/time of day clock and graphically displays the barometric pressure trend. Barometric pressure trend shows current reading and previous 2-, 4-, 6-, 8-, 10-, and 12 hours in bar-chart format. Barometric pressure reading is updated every 15 minutes. Altitude is displayed in meters or feet. Reading is updated every 2 seconds. Features a minimum/maximum memory for the altitudes reached during any time period.Temperature display is updated every 10 seconds. Clock displays the time of day to the minute and shows the date and month. The clock also features a format of 12-/24-hour timing and an alarm.

Bar-4198

Specifications: Barometric pressure: Measures 15.90 to 31.01” Hg with a resolution of 0.03 Hg and from 400 to 1070 mbar with a resolution of 1 mbar with accuracy: ±0.2363 Hg (±8 mbar). Altitude: -500 to 7000 meters (-1640 to 22,965’), with a resolution of 1 meter or 1 foot. Thermometer displays: -40.0 to 158.0°F and -40.0 to 70.0°C with a resolution of 0.1°, accuracy is ±1°C. Stopwatch: times from 1 second to 99 hours, 59 minutes, 59 seconds · Resolution is 1 second and accuracy is 0.01%

MUTLI-FUNCTION HOT WIRE ANEMOMETER

Features: • Single Probe Capable of Measuring Air Velocity and Temperature Simultaneously• Built-In-Memory Allows Storage of Measured Data• Highly-Visible LCD is Capable of Displaying Air Velocity and Temperature• Carrying Case, Operation Manual • RS-232C Cable, AC Adapter, 6x AA Batteries and Software (for Windows)• Data can be Reviewed On-Screen, Printed, or Downloaded to a Computer

Hot Wire Anemometer with two miniature glass-bead thermistors provides greater precision at low air velocities. Telescope probe expands from 9.2 inches to 3 feet for hard-to-reach places. Eliminate friction errors caused by rotating vanes with this no-moving parts. Serial RS-232 output allows anemometer to be connected to a computer or data logger for monitoring results. Memory function recalls the highest and lowest readings. A data hold button freezes the display to capture readings. Unit is supplied complete with dual thermistors probe, 40-inch cable, carrying case, Traceable® Certificate, 6 AAA batteries, and serial computer output.

an-a031

Specifications: Air Velocity Range: 20-6000fpm (0.10-30 Om/s). Air Velocity Accuracy: +/-2% of reading or +-3fpm whichever is greater. Temperature Range: -4 to 140.0 F (-20 to 60.0°C). Temperature Accuracy: +/-1°C). Data Logging: Up to 800 measurements. Probe Type: Straight. Probe Dimensions: Length 39.4 in. (100 cm) - Telescopic / Diameter of Tip; 0.236 in.

AN-A031

BAROMETER 6-LINE DIgITALTraceable® Barometric Pressure/Humidity/Temperature Meters Electronic digital barometers measure atmospheric pressure, graphically display the barometric trend, and report relative humidity and temperature.

Bar-4195

Specifications: Barometer measures pressure from 23.45 to 31.01 (inHg) with a resolution of 0.03 inHg,(794 to 1050 mbar) · Accuracy is ±0.1477 inHg (±5 mbar) · Display relative humidity with a resolution of 1% · Accuracy is ±5 RH · Temperature range is from 32 to 131°F and 0 to 55°C · Temperature accuracy is ±1°C

BAR-4198



TEMPERATURE MEASUREMENTThe Total-Range Thermometer can switch from °F to °C at the touch of a button. Unit features HOLD button that freezes display to capture current reading. A microprocessor updates the display twice a second. Uses all Type-K thermocouple probes. Alarm function may be set in 1° increments. Sound signals when time is reached. Back-lighting button permits reading in dark areas. Comes ready to use with PVC protective casing with flip-out stand. Batteries power unit for 1 year of routine use. Jumbo-size, 5/8-inch-high digits, constructed of shock-resistant ABS plastic. Water-resistant case stops dirt, dust, fumes, and water.

tC-4015

2 CHANNEL THERMOMETER Provides recessed front panel adjustable offsets on two channels allowing user to adjust thermometer exactly to a specific temperature, in-house calibration, or particular sensor for increased accuracy. Provided rubberized case makes it a virtually “environment-proof” instrument for all weather, shock, and abusive conditions. Supplied with Velcro™ wrist strap. Built-in stand makes it ideal for lab bench. Large LCD display shows temperatures of probe 1, probe 2, or the difference (delta) of the two probes. Readout in °F and °C. Extra-large, 3/4-inch-high display is readable from 12 feet. Max button captures the highest reading achieved. HOLD button freezes display to capture current reading. Uses all Type-K thermocouples. Supplied with two immediate-response probes which indicate temperature changes in less than one second.

tC-4135

WORKHORSE THERMOMETER Type-K Workhorse™ Thermometer provides a sharp readout in dim and very bright light, long battery life (150 to 200 continuous hours), high accuracy, wide temperature range, and a new chip design for an ultra low Price. Recessed front panel adjustable offset allows user to adjust thermometer exactly to a specific temperature, in-house calibration, or a particular sensor for increased accuracy. HOLD button freezes display to capture current reading. Supplied with bench stand. It is compatible with all Type-K probes. Supplied with fast response Type-K probe, bench stand, 9-volt battery, and carrying case. Cable length of 40 inches.

tC-4425

WATERPROOF THERMOMETERWaterproof Thermometer has membrane switches, ABS body, and stainless steel probe, good for use in labs, plants, wash-down areas, and the field. Unit eliminates the dangers inherent in breakable glass and toxic mercury thermometers. It displays minimum and maximum readings over any period. Unique holder allows probe to be positioned at any height while attached to beakers, stainless cylinders, or vats. Probe guard snaps to handle to extend overall length to 10.75”. Readings are updated every second. Supplied with probe holder, key chain, and lanyard. Operates continuously for 1.5 years on supplied replaceable silver-oxide battery.

dPt-168-nIstSpecifications: Range: -58 to 572°F and –50 to 300°C. Resolution: is 0.1° from –20 to 200° (1° otherwise). Accuracy: ±0.4°C or ±1.5°C. Dimensions: stem length, 3.25” inches; stem diameter is 0.14”; overall length is 7.25”. Weight is 1 oz.

THERMOMETERS

Specifications: Range: -328 to 2498°F and -200 to 1370°C. Resolution: 0.1° and 1°. Accuracy: ±1°C between -50°C to 740°C, otherwise ±2°C. Dimensions: 3.25” x 7 x 1.5” ( cm x cm x ); 8 oz ( kg).

Specifications: Range: -58 to 2000°F and -50 to 1300°C with1° resolution. Accuarcy: is ±0.3% plus 1°C.Dimensions: HxWxD 2.75” x 5.25” x 1.25” ( cm x cm x cm); 5.25 oz

Specifications: Range: -58.0 to 2372°F and -50.0 to 1300°C. Accuracy: ±(1°C + .75%) between 0 to 500°C; ±(1°C + 1%) 500 to 750°C; ±(1°C + 2%) 750 to 1000°C; ± (3°C + 4%) 1000 to 1200°C; ±2°C at –20; ±3°C at –40; and ±4°C at –50). Resolution: 0.1° between –50.0 to 200.0 and 1° elsewhere Probe dimensions: length is 5” and .175” diameter . Thermometer Dimensions: 2.75” x 5.5” x 1.25” ( cm x cm x cm); 6 oz ( kg).

TC-4015

TC-4135

TC-4425

DPT-168-NIST



Red Spirit Filled Thermometer with a Range of 20° to 120°F. It is fast and accurate with no assembly required. Includes high impact on plastic construction.

B12-7012

HUMIDITY

Sling Psychrometer

Monitor shows current, minimum, and maximum displays and includes a settable high/low alarm for all four readings (dew-point, wet-bulb, humidity, temperature). Alarm may be set in 0.1 increments, it sounds for one minute and red LED flashes until readings return to non-alarm condition. Meets federal requirements for CLIA specification 493.1207 for monitoring temper-ature and humidity. Supplied with two AA alkaline batteries for continuous, 1-year “always on” monitoring, and Traceable® Certificate. LCD digits are 1-inch-high. Case is high-impact, chemical-resistant ABS plastic.

HuM-4410

DEW-POINT/WET-BULB/HUMIDITY/THERMOMETER

MODEL 520 PIE (PRACTICAL INSTRUMENT ELECTRONICS) THERMOCOUPLE SIMULATORSPrecise temperature inputs to all types of instruments, transmit-ters, recorders, controllers, alarms, data acquisition and computer systems. Provides 18” extension wire output and is cold junction compensated for changes in ambient temperature. Accurate source for checkout and calibration of all thermocouple instruments. Practi-cal Instrument Electronics (PIE) Model 520 Thermocouple Simulator simulates a dedicated standard thermocouple curve over the entire industrial temperature range.

M5C-520

Specifications:

Temperature Range: –40 to 70 °C and –40 to 158°F

Resolution: 0.1° (below 100. Accuracy: ±1°C

Relative Humidity Range: 1 to 99%

Resolution: 0.1%RH. Accuracy: ±4% between 20 to 80%

Dimensions: HxWxD 4.125” x 4.125” x 1”. Weight is 4.25 ounces

B12-7012

HUM-4410

M5C-520



Type-K Thermocouple Assembly

Type-K Thermocouple Assembly with standard plug, inconel sheath, magnesium oxide insulation, 1/8” outer diameter. Maximum Temperature 1800°F.

TYPE-K THERMOCOUPLES

tCa-12Mg212” Type-K Thermocouple Assembly



Model Description

WK-PP-24 24GA-Solid, Polyvinyl

WK-PP-24S 24GA-Stranded, Extension

WK-HH-24 24GA-Solid, TYPE K, HITEMP Glass

WK-TT-24 24GA-Solid, TYPE K, Teflon®

WK-TT-24S-SB 24GA-STR, TYPE K, Teflon®, stainless steel Overbraid

WK-XC-24 24GA-Solid, High Temp Glass Insulated, Ceramic

WK-125CI MGO Insulated, Type K, I600

Custom thermocouple cable assemblies made to order. Multiple lines and braided oversleeving available. Quantity discounts are available. Call for more details and pricing.

THERMOCOUPLE WIRE TYPE-K

These bushings are installed into an insert indentation of the connector and provide strain relief for thermocouple wire.

RUBBER BUSHINgS

tC-rB

Thermocouple Bushing, Rubber Cord (standard size)

tC-MrB

Thermocouple Bushing, Rubber Cord (miniature size)

Apex Temperature Plugs and Jacks feature a glass filled thermoplastic body which provides high strength at temperatures up to 218°C (425°F) as well as low moisture absorption and good dielectric constant.

THERMOCOUPLE PLUgS AND JACKS

Snap-In Panel Jack, Type-K (Standard Size).tC-PJK

Snap-In Panel Jack, Type-K, Universal. tC-PJu

Snap-In Panel Jack, Type-K, Round Threaded Mount.tC-PJr

Snap-In Panel Jack, Type-K, Mini Panel Jack.tC-PJ-MK

Connector, Type-K, Female, Cord Mount, (standard size). Includes: Plug, Cover, Screws & Bushing.tC-lJ-Ka

Connector, Type-K, Male, Cord Mount, (standard size). Includes: Plug, Cover, Screws & Bushing.tC-lPs-Ka

Connector, Mini, Type-K, Female, Cord Mount.Includes: Plug, Cover, Screws & Bushing.tC-MJ-Ka

Connector, Mini Type-K, Male, Cord Mount. Includes: Plug, Cover, Screws & Bushing.tC-sP-Ka

Adapter, 1/8” Tube Union, Stainless Steel.ta-125

Adapter, 1/4” Tube Union, Stainless Steel.ta-250

Call for custom lengths.



Flow Pressure & Temperature2-D Flow Modular System .......................... 4b2-D, Pitot..................................................... 4b2-D, Pitot Calibration .................................. 4b2-D, Software.............................................. 4b2-D, Inclinometer ........................................ 4b2-D, Manometer.......................................... 4b3-D Flow Modular System .......................... 5b3-D Console, Classic MC-3D52.................. 5b3-D Pitot (5 Hole Pitot)................................ 5b3-D Pitot Calibration ................................... 5b Accu-flow Measurement System ................ 3bAir Velocity Kits ........................................... 16bAnemometers ............................................. 17b-18bBarometers ................................................. 18bBushings ..................................................... 11bCam-Lock ................................................... 10b-11bCouplings.................................................... 11bDew-Point/Wet-Bulb Thermometer ............. 20bFlanges ....................................................... 10b-11bFlange Reducers ........................................ 11bHumidity...................................................... 20bInclinometers .............................................. 13bInclined/Vertical Manometer ....................... 16bMagnehelic Gauges.................................... 17bManometers................................................ 15b-16bMethod 2, Pretest Survey Kit ...................... 16bMethod 2, Magnehelic Kit ........................... 16bOrifice Flow Meters ..................................... 12bPort Adapters .............................................. 10b-11bPacking Glands .......................................... 7bPacking Glands .......................................... 10b-11bFlow Adapters ............................................. 12b-13bPitot Tubes.................................................. 6bPitot Assembly Options............................... 6bPitot Tube, Type-S ...................................... 7bPitots, Modular............................................ 8bPitots, Modular Components ...................... 8bPitots, Telescopic Tube Extension .............. 8bPitots, Union & Quick Connects ................. 8bPitots, Method 2C Standard Tube .............. 9bProbe, 2-D (3 Hole Pitot) ............................ 9bProbe, 2-D (3 Hole Pitot) ............................ 9bThermometers ............................................ 19bThermocouple Simulators........................... 20bThermocouple Assemblies ......................... 20bThermocouple Rubber Bushings ................ 20bThermocouple Plugs & Jacks ..................... 20bTransducer Transmitters ............................. 14bTransducer Displays ................................... 14bThermocouple Transmitter.......................... 14bRotometers ................................................. 12bSling Psychrometer .................................... 20b

Probes InclinometersManometers



Example showing circular stack cross section divided into 12 equal areas with location of traverse points indicated.

Example showing a three by four rectangular stack cross section with location of traverse points indicated.

TraversePoint

123456

Distance% of diameter

4.414.729.570.585.395.6

Rectangular StackLocation of Sampling PointsLocation of Sampling Points

Circular Stack

Number of traverse Matrix layout points 9 3x3 12 4x3 16 4x4 20 5x4 25 5x5 30 6x5 36 6x6 42 7x6 49 7x7

Kp = Velocity equation constant (34.97 metric, 85.49 English)

Cp = Pitot tube coefficient (0.84 baseline coefficient, else use wind tunnel calibration)

FEDERAL REFERENCE METHOD 2Determination of Stack gas Velocity and Volumetric Flow Rate(Type S Pitot Tube)

INPUT PARAMETERS

Area of stack (m2) or (ft2) = pr2 or p (D/2)2 or L x W = As = _________

Pitot tube coefficient = Cp = _________

Stack gas temperature (K) or (°R) = Ts = _________

Average of square root of velocity head (mm. H2O)1/2 or (in. H2O)1/2 = ( )avgp∆

= _________

Barometric pressure (mm. Hg) or (in. Hg) = Pbar = _________

Stack gas static pressure (mm. H2O) or (in. H2O) = Pg = _________

Absolute stack gas pressure (mm. Hg) or (in. Hg) = Ps = _________

Note: Ps = Pbar + Pg (mm. H2O)/13.6 or (in. H2O)/13.6

Stack gas moisture (fraction) = Bws = _________

Stack gas dry molecular weight (g/g-mole) or (lb/lb-mole) = Md = _________

Stack gas wet molecular weight (g/g-mole) or(lb/lb-mole) = Ms = _________

Note: Ms = Md (1 – Bws) + 18.0 Bws

CALCULATIONS

vS = Stack gas velocity, m/s or ft... /s

ss

avgsavgpps MP

TxpxCxKv )()( ∆=

= _______________m/s (ft... /s)

www.apexinst.com

919-557-7300 or 800-882-3214Fax: 919-557-7110




Filters

Flanges

Pre-Filter

Gas analysisEquipmEnt CataloG

20c


800-882-3214 /919-557-7300 www.apexinst.com





We back up this commitment with extensive knowledge of our products, good communication and an excellent customer service history. Our equipment is designed by experienced stack testers who know what you face when performing compliance testing.







Local: 1-919-557-7300fax: 1-919-557-7110


www.apexinst.com



[email protected]





[email protected]






APPENDIX

INDEX

ACCESSORIES






gas analysis equiPment Gas sampling or constant velocity sampling requires an understanding of Methods 1 through 3, these are basic methods of collecting a sample. Apex offers source sampling solutions to complete your testing needs. The XC-60 Source Sampler is designed to extract and trap the samples needed to test for harmful gases. After the sample is collected there are many types of analysis depending on the compound(s) of interest.

Method 3 Gas Analysis for the Determination of Dry Molecular Weight

Method 3B Gas Analysis for the Determination of Emission Rate Correction Factor or Excess Air

Method 4 Determination of Moisture in Stack Gases

Method 7 Determination of Nitrogen Oxide - Emissions from Stationary Sources

Method 18 Integrated Bag Sampling for Organic Compounds

Method 0030 Volatile Organic Compounds (VOST)

Method 0031 Volatile Organic Compounds (SMVOC or SuperVOST)

Method 0040 Principle Organic Hazardous Constituents (POHCs) using Tedlar® Bags

Method 0051 Hydrogen Chlorine and Chlorine

Method 3A Determination of oxygen and carbon dioxide concentrations in emissions from stationary sources

Method 6C Determination of sulfur dioxide emissions from stationary sources

Method 7E Determination of nitrogen oxide emissions from stationary sources

Method 10 Determination of Carbon Monoxide Emissions from Stationary Sources

Method 25A Determination of Total Gaseous Organic Concentration using a Flame Ionization Analyzer

iRm - Instrumental Reference Methods & Equipment The US EPA specifies IRM Reference Methods are used to sub-stantiate the accuracy and precision of the CEMS. A Continuous Emission Monitoring System (CEMS) is the equipment that is used for the determina-tion of a gas or particulate matter concentration or emission rate using pollutant analyzer measurements, conversion equations, graphs, or computer programs to produce results in units of the applicable emission limitation or standard. CEMS are required under some of US EPA regulations for either continual compliance or when one is exceeding the standards.

Extractive Sampling Equipment..................3c

Pre-Filters, Flanges, IRM Probe, Probe Assemblies....................4c - 5c

Filter Assemblies, RATA Sampler, Tri- Sample ProbePMI Dilution Probe & Panel ...................6c - 8c

Heated Sample Line, CEM Temperature Controllers ....................9c - 10c

Gas Conditioners, Portable Conditioner, Flow Draws, Gas Analyzers .....................11c - 14c

Method 3 Orsat Analyzers,Combustion Gas Analyzers,Filter Housings, Condensers .....................15c - 18c

Gas Analysis Index ....................................19c

3c


www.apexinst.com 800-882-3214 /919-557-7300

apex systems offer:

• Gas Conditioners• Flow Control Drawer• Data Acquisition

• Heated Sample Probe• Filter• Heated Sample Line• Temperature Controller

FlangeHeated Filter

Enclosure

Heated Sample Line

Stainless Steel CamlockPre-Filter Assembly

Poly Camlock

Transportable - IRM System

There are several instrumental reference methods (IRM) in 40 CFR Part 60 that are used to measure air pollutant emis-sions from stationary sources using a continuous instrumental analyzer. These include Methods 3A, 6C, 7E, 10, 20 and 25 to measure oxygen, carbon dioxide, sulfur dioxide, nitrogen oxides, carbon monoxide, and gaseous hydrocarbon organic emissions from stationary combustion sources.

ExTRACTIVE SAMPLING EqUIPMENT

4c


800-882-3214 /919-557-7300 www.apexinst.com

PRE-FILTERSStainless Steel IRM Filter Assembly with replaceable glass fiber filter element that accepts standard 25 m x 90 mm tapered filter thimbles. Particulate shroud to deflect large particulate and increase filter lifespan. Modular, threaded shroud design allows quick and easy replacement of the filter element. Filter retaining ring securely holds filter. Outlet has 3/8” female NPT. Optional Silcosteel coating for low NOx applications. Replaceable filter elements sold separately.

sFC-2590

Porous Stainless Steel Filters are typically used as a pre-filter for IRM In-Stack Filtration to prevent clogging of filters downstream. Filters have over 18 square inches of a 10 micron filtering surface and can be back flushed with compressed air. Apex also offers an optional particulate shroud for extra heavy dust loadings. These filter assemblies attach to the stack end of the probe liner.

SFC-2590(Shown with Tube Union

Adapter)

SFC-2590(Inside View with GF-2590 element)

IRM PROBEIRM Probe Assemblies incorporate the popular heater design from the Method 5 probes so liners can be changed in seconds without disturbing the heater. The separate heater tube provides even heat distribution and isolates the electrical elements from the liner. The probe sheaths are constructed with a 2” stainless steel outersheath with a tube nut welded to the end for attachment to a porous filter or a bored cap. Probes are available in any length from 2’ to 20’. The probes are manufactured to accommodate standard wattages or customized for hotter conditions. Add “V” to end of part number for 240 VAC.

All IRM Probe Assemblies are available with 1” or 2” OD Stainless Steel Sheath, 2” OD stainless steel sheath with a heater and a liner made from stainless steel, inconel, quartz or glass (120 VAC/60 Hz). Classic 1” OD stainless steel sheath is also still available.

FlangePorous FilterAssembly

Stainless Steel Camlock

IRM Probe

SSF-64N10-P

Stainless Steel Pre-Filters

Part # Description

SSF-64N10 Sintered Stainless Steel Filters, 10 Micron, 6” Length, 1/4” FNPT Fitting

SSF-64N10-P Sintered Stainless Steel Filters, 10 Micron, 6” Length, 1/4” FNPT Fitting with 1.25” OD Particulate Shroud

LengthBlank = No ShroudP = Particulate Shroud1/4 Inch FNPT

10 Microns

Male Straight Connector (Not Included with SSF-64N10 or SSF-64N10-P)

Part # Description

4MSC4N-S 1/4” Tube Fitting to 1/4” MNPT, Stainless Steel




5c


www.apexinst.com 800-882-3214 /919-557-7300

IRM Ceramic Probe Heaters are recommended for temperatures over 500°F. (only available with 2” oversheath). Call for Pricing on Special Inconel & Ceramic Hi-Temp Heaters.

Model PC�-�S-�2 2” OD 2” OD 2” OD 1” OD

Nominal Length 4=1/4” 6=3/8” 8=1/2” 1” Classic

3’

4’

6’

8’

10’

12’

IRM 2” Stainless Steel Probe Assemblies with Stainless Steel Liner

IRM Probes are available with Stainless Steel or Inconel Sheaths, Heated or Unheated, & with 1/4, 3/8, 1/2, or 5/8 IN O.D. Liners. Additional configurations& sizes are available. CALL FOR PRICING. - -

Blank = 1”O2 = 2”

Sheath

S = Sheath

Link to Pipe Flanges

IRM System

Pre-FilterAssembly

Flange

Stainless Camlock

Heated FilterEnclosure

PolyCamlock

Heated Sample Line

Call foradditional information

6c


800-882-3214 /919-557-7300 www.apexinst.com

The oven can accept an 18’ long heated probe with 2” diameter sheath. The probe uses a replaceable 3/8” stainless steel liner. The oven features a lightweight construction, with a rugged strip heater, 1/2” insulation, high temperature and stainless steel hardware. Type-K thermocouple jacks are used for monitoring probe and oven temperature. A dual channel digital thermometer is recommended.

FILTER ASSEMBLIES

HEATED FILTER ASSEMBLIES

Product Description

SFA-2564 3 Port Filter Assembly, 25x64mm, Stainless Steel Filter Assembly, with One 1/4” Input, One 1/4” Output and one 1/8” FNPT Cal Gas Input Ports, Accepts GF-2564 Filter Elements

SFA-2564-2N6 6 Port Filter Assembly, 25x64mm, Stainless Steel, with total of six (6) 1/8” NPT Ports, Accepts 25X64mm Filter, Used in Tri-Sample Probe

REPLACEMENT FILTER ELEMENTSProduct Description

GF123270K Filter Cartridge, Borosilicate glass microfiber with Fluorocarbon resin binder, 12 x 32 mm, Maximum Temperature 300°F, 10/pk

GF123270S Filter Cartridge, Borosilicate Glass Microfiber with inorganic binder,12 x 32 mm, Maximum Temperature 900°F, 10/pk

GF125770K Filter Cartridge, Borosilicate Glass Microfiber with Fluorocarbon resin binder, 12 x 57 mm, Maximum Temperature 300°F, 10/pk


GF256470K Filter Cartridge, Borosilicate Glass Microfiber with Fluorocarbon resin binder, 25 X 64mm, Maximum Temperature 300°F - 10/pk,

GF256470K Filter Cartridge, Borosilicate Glass Microfiber with Fluorocarbon resin binder, 25 X 64mm, Maximum Temperature 300°F - 10/pk,

GF2517870K Filter Cartridge, Borosilicate glass microfiber with Fluorocarbon resin binder, 25 x 178 mm, Maximum Temperature 300°F, 10/pk


Apex Instruments stocks 2 types of Cartridges: K-type with Fluorocarbon Resin Binders for Testing in Locations where Highly Reactive and/or Corrosive Gases are Present, and S-type Cartridges with Inorganic Resin Binders for Filtering Gases at Temperatures up to 900°F.

1” ProbeClamp

SFA-2564HE-A

2” ProbeClamp

Probe Clamp

SFA-2564

Product Description

SFA-2564HE-AT Thermostat Controlled Heated SFA-2564 CEM Filter Assembly and Silicone Insulated Enclosure, Accepts GF-2564 Filter Elements, 1” PC- 1 Probe Clamp, Standard Male Plug, 110V

SFA-2564HE-AV Heated SFA-2564 CEM Filter Assembly and Silicone Insulated Enclosure, Accepts GF-2564 Filter Elements, 1” PC- 1 Probe Clamp, Standard Male Plug, 240V

SFA-2564HE-B Heated SFA-2564 CEM Filter Assembly and Silicone Insulated Enclosure, Accepts GF-2564 Filter Elements, 2” Probe Clamp, Standard Male Plug, 110V. ** Cable Entry Seal sold separately **

SFA-2564HE-A Heated SFA-2564 CEM Filter Assembly & Silicone Insulated Enclosure, Accepts GF-2564 Filter Elements

REPLACEMENT FILTER COMPONENTS

7c


www.apexinst.com 800-882-3214 /919-557-7300

The Apex Instruments Tri-probe allows the simultaneous sampling and monitoring from three distinct sampling points. The manifold and filter unit comes with six holes, for a unique design made for RATA sampling. The user can now extract samples without moving the probe to different traverse points. Traverse points acquire representative samples

TRI-SAMPLE PROBE

The Tri-Probe has multiple probe extension options to meet the specifications of any test site.

GAS SAMPLE FILTER HOUSINGS

SFA-116IL SFA-137G TFA-122P 760N-2

Traditional in-line gas sample filters are used to remove particulate prior to analyzing to protect your valuable equipment. Replacement filters not included.

Product Description Temperature Rating

Pressure Filters

SFA-116IL Stainless Steel, 1/4” FNPT, 3” Long 200°C (400°F) 5000 PSIG 12 x 32mm, GF123270K, GF123270S

SFA-H130S-TE Stainless Steel, Heatable, 4.57” Long, 1/4” End Ports

200°C (400°F) 30 PSIG 25 x 64mm, GF256470K, GF256470S

SFA-137G Glass Filter, T-Type, 1/4” FNPT, 4.49” Long 200°C (400°F) 150 PSIG 25 x 64mm, GF256470K, GF256470S

TFA-122P PTFE, 1/4” FNPT, 3.86” Long 150°C (300°F) 100 PSIG 12 x 57mm, GF125770K, GF125770S

760N-2 Nylon, Side Ports, 1/4” FNPT, 5.51” Long 50°C (120°F) 100 PSIG 25 x 64mm, GF256470K, GF256470S

Filter Housing

8c


800-882-3214 /919-557-7300 www.apexinst.com

Features• Low Cost Installation, Maintenance and Operation• Low Extractive Flow Rates, Promotes Long Filter Life• Made of Corrosion Resistant Materials• Can be used in Explosion Proof Areas• No Requirement for Heated Sample Line• No Moving Parts Anywhere in the System• Easy Dynamic In-Situ Calibration of Dilution System• Diluted Sample is Transported at Positive Pressures• Can be Used with Any Existing Ambient Air Analyzer• Manual or Optional Automatic Blow Back, Back Flushes Coarse Filter PMI-3000 Probe

SpecificationsA) Material of Construction:• The Eductor Housing, Mantle, Filter Cap and Flange (the “Wetted Parts”) are Fabricated from Inconel® 600, a Corrosion Resistant Nickel-Chromium Alloy.• The Heat Exchanger and the Four Inlet/Outlet Tubes are Fabricated from Grade 316 Stainless Steel.

B) Maximum Operating Temperature:• 750o F (400o C) with standard glass orifice.• 1,100o F (600o C) with special metal orifice – call PMI for details.

C) Dimensions:• Vacuum and Calibration lines 0.125” OD.• Dilution Air and Sample out lines 0.25” OD.• All lines supplied with 0.25” OD tube fitting attached.

ADP-007

Apex Instruments Dilution PanelFeatures• High Accuracy• High Resolution Regulation• Blow-Back Control• Calibration Circuit

aDP-007

PMI Dilution ProbePMI Dilution Probefor In-Situ Sampling Conditioning of Stack GasesThe PMI-3000 Dilution Probe performs four critical functions to prepare the sample from the stack or process, so it can be measured accurately and precisely by the analyzer. The probe uses an air driven aspirator which extracts the sample from the stack or process. It is then passed consecutively through coarse and fine particulate filters, a pre selected glass or met-al critical orifice, and finally diluted with the air from the aspirator. This process has now reduced the dew point of the sample to below that of the ambient air, preparing the sample so that it can be transported via an unheated line to the analyzer up to 300 feet away.

There are two models of the PMI-3000 Dilution Probe available, differing only in the type of mounting flange. Model PMI-3200, equivalent to the EPM 0797.302, has a 1.8” flange drilled and tapped with four mounting holes. Model PMI-3300 (equivalent to EPM 0797.303) has a threaded flange for easy use with extension tubes.

PMI-3000 / PMI-3200 / PMI-3300 Dilution Probe

Specifications:• Application EPM Thermo, PMI Type in Situ Type Probes.• Remote (Dry Contract) for Cal and Blow Back.• Sample, Bypass and Cal Gas Rotometers.

• Precision Air Pressure Regulator.• 4 U (19” W x 7”H)) Case Rack Mountable (20 lbs.)• Front Panel Air Pressure, Vacuum and Blow Back Gauge’s• 110 / 220 VAC

9c


www.apexinst.com 800-882-3214 /919-557-7300

APEX Pro-Series Heated Sample Line HSLP-64-100The Apex Instruments Heated Sample Lines are designed for the professional stack tester that needs a rugged lightweight flexible sample line that can handle the abuse of IRM sampling day after day. The standard core includes one 3/8” PFA tube for the sample and one 1/4” tube for introducing calibration gas at the probe. Both lines have stainless steel overbraid and swaged tube stubs attached.

Apex Pro-Series Heated Sample Line, 100 FT, 3/8 IN & 1/4 IN PFA stainless steel Overbraid Lines, Nomex®/Aramid Felt Insulation, Non-Lead Stabilized Vinyl Elastomer Extruded Jacket (orange). Requires Temperature Controller. Apex Offers temperature controllers for use with the Pro-Series.

HslP-64-100100 FT Heated Sample Line 3/8 IN & 1/4 IN PTFE lines, Foam Insulation w/ Oversheath.

HslP-64-100

Features

• PFA Tubing with Stainless Steel Overbraid - Heated Sample; 3/8” - Unheated Cal-Gas; 1/4”

• 1/2” Nomex® Insulation

• Non-Lead Stabilized Vinyl Elastomer Extruded Orange Durable Jacket for High Visibility, Flame Retardant

• Lightweight & Flexible

• Bend Radius: 10”

• Stainless Steel Tube Stubs

Specifications• Spiral wound heating element for uniform heat distribution• Power Density 23 Watts/ft.• Supply voltage 120V or 240V• Maximum temperature rating 400o (200oC)• Tube maintenance up to 370oF (200oC) at 0oF• Type K thermocouple for control sensor• Nominal O.D. 1.75”• Weight 55 lb. for 100 ft.• Maximum operating pressure: 300 psi

A temperature controller MUST be used on this bundle in order to prevent it from overheating.

Apex offers temperature controllers for use with the Pro-Series

apex Pro-seriesDesigned for

Portable Systems

iCH-901Temperature Controller

Higher Temperature Units are Available.Inquire for Custom Lines Manufactured to your Specification.

temperature ControllerHeavy Duty (High Output) Single Station Digital Temperature Controller, 20A Max, 120V.

iCH-901

10c


800-882-3214 /919-557-7300 www.apexinst.com

CEM TEMPERATURE CONTROLLERS (4 different models)Apex Instruments offers a choice of one or two station Temperature Controllers in three different styles of digital display controllers. All of our temperature controllers have a panel mounted circuit breaker and a separate solid state output relay for high output reliability. The heavy duty controllers have a panel mounted circuit breaker and a separate solid state output relay for high output reliability. Our heavy duty controllers have a separate slow-blow 25 amp fuse that is panel mounted for easy access and are typically used with 50 to 100 foot heated sample lines. These temperature controllers can be used for (CEM) in any application where there is a need to control temperature. The dual station controllers can be used in configurations that require control of any two heated devices such as the probe/oven combination or the probe/heated sample line.

ICH-901

Single Station Digital Heavy Duty (High Output) Single Station Digital Temperature Controller, 20A Max, 120V.ICH-901

ICS-902

Dual Station DigitalDual Station Digital Temperature Controller, Solid State Output Relay, 10A Max, 120V.ICS-902

Single and Dual TemperatureController Features• External Vertically Mounted Aluminum Heat Sinks for Better Heat Transfer from Relays.• Compact Size: 8.5” x 7.25” x 6.5” (21.6 cm x 18.4 cm x 6.5 cm)• Oversized Solid State Relays - 25 Amp (50 Amp Available for High Output)• Type K Thermocouple Input (Other Modules Available Upon Request)• Standard Receptacles for Power Output• Alternate Connectors Available (i.e. 4-Pin Circular Connectors)

Features• Fixed or Adjustable Set Points• Four Character LED Display• Fahrenheit or Celsius Operation with Indication• Sensor Break Protection• Microprocessor Based Technology

Single Station Analog Temperature Controller with Internal Relay, 120V, Press-to-Set Digital Indicator in Diecast Aluminum Enclosure, Degree C Readout. ICS-CV1F

ICS-CV1

Product Stations Duty Controller Output Power

ICS-901 One-Station Standard Digital 15 Amps 110V

ICS-902 Two-Station Standard Digital 15 Amps 120V

ICH-901 One-Station Heavy Digital 20 Amps 120V

ICS-CV1* One-Station Standard Analog Internal Relay

120V

Temperature Controllers

*Add ‘C’ for Celsius or ‘F’ for Farenheit. Comes with press-to-set digital indicator in diecast aluminum enclosure. 240 volt operation is available for all controllers. Add “V” to end of part number. (e.g. ICS-901M-V).

Single Station Digital Temperature ControllerSingle Station Digital Temperature Controller, Solid State Output Relay, 10A Max, 110VICS-901M

Compact Rugged

ICS-901M ICS-901MFront View

Digital Display Temperature Controllers

Product Stations Duty Controller Output Power

ICS-CV1* One-Station Standard Analog Internal Relay 120V

Temperature Controllers

ICS-CV Station Digital Temperature ControllerThe Apex ICS-CV temperature controllers are basic on-off microprocessor based temperature controllers mounted in a die-cast aluminium enclosure. The temperature set-point is easily set by pushing the button and rotating the dial to the desired temperature on the LED display. Actual temperature is continuously displayed.

• Accuracy to ±0.25% of Span •1/32 DIN Controller

Single Station Analog Temperature Controller with Internal Relay, 120V, Press-to-Set Digital Indicator in Diecast Aluminum Enclosure, Degree F Readout. ICS-CV1C

11c


www.apexinst.com 800-882-3214 /919-557-7300

GAS CONDITIONERS

The APEX INSTRUMENTS SGC-4000HG STIRLING GAS CONDITIONER/COOLER is specially designed for removing moisture and acid gases from flue gas samples. This new style gas chiller uses an industrial grade super efficient Free Piston Stirling Cooler (FPSC) for chilling the gas to a constant dew point. The FPSC has several advantages over the con-ventional Rankine Compressor or Thermoelectric Refrigeration units. For example, the FPSC chiller module uses a small quantity of environmentally safe helium gas as a refrigerant. The module is hermetically sealed in stainless steel casing allowing for fast and easy installation and replacement when necessary.

Specifications• Digital Temperature Control +/- 1 Degree C, LED Display• Cooling Capacity >40 Watts• Dual Path Cooling Block Anodized Aluminum• Condensate Bottle 1000 ml (Plastic Coated Glass)

• Reverse Flow Condensate Separator Silcosteels-CR Treated Stainless Steel 1” OD x 4” Active Zone• Maximum Flow Rate 2 liters per minute @ 20% H2O/Channel• Alarm Output Switched 6v DC

• Freeze Protection 80w Heater• Ambient Operating Temperature 0 to 500 C• Power Requirements 120v AC/2.5 amps

Available in Rack Mount or

Portable versions

sgC-4000HgP

• No Additional Tubing or Pumps• Digital Temperature Control• Constant Set Temperature

• Free Piston Stirling Cooler (FPSC) Has Only Two Moving Parts.• Temperature Alarm Output

Features:

The APEX INSTRUMENTS NEW SGC-4900 STIRLING GAS COOLER is spe-cifically designed for removing moisture from process gas samples prior to gas analysis. The SGC-4900 Stirling Gas Cooler uses an innovative FPSC (Free Piston Stirling Cooler). Water vapor is removed by quickly cooling the flue gas sample as it passes through two condensers in series. The first condenser is air cooled and the second condenser is actively cooled with a FPSC module. The cold finger side of the FPSC is inserted directly into the anodized aluminum, heat exchanger which surrounds the gas condenser. No piping for the environmental friendly helium refrigerate is required. Accessories Include; Condensate Pump, Heated Filters, Probe & HSL, Water Slip Sensor at Alarm, Sample Gas Pump.

sgC-4900 stirling gas Cooler

DescriptionDigital Temperature Control PID, LED Display, ± 1°CCooling Capacity Up to > 65 WattsChiller Block Anodized AluminumAir Cooled Glass Condenser with Finned Tube Heat Sink

2” O.D, 5.5” Contact Zone

Active Glass Condenser 4.5” Active ZoneFlow Rate Up to 15 LPM Dew Point 40°FFreeze Protection 80w HeaterAmbient Operating Tempera-ture

0 to 50°C (32°F to 122°F)

Inlet / Outlet Fittings 1/4” Tube UnionsPower Requirements 120VAC / 2.5 ampsDimensions and Weight 19” Rack Mount, 17” W x 16” D x 7” H, 28 lbs.

Specifications

Features:• Low Gas Absorption• Easy to Maintain• Integrated Heater• Energy Efficient• Two Stage Cooler

• Digital Temperature Control• Light Weight• High Capacity• Rack Mountable• FPSC

Moi

stur

e

% Mois ture v/s F low R ate (L P M)

0%

5%

10%

15%

20%

25%

30%

5 10 15

% H2O @ F lowR ate

Flow Rate (LPM)

Constant Dew Point Curve at 40° (4°C)

Portable unit sgC-4000 HgPsgC-4000HgP (110V)sgC-4000HgP-V (240V)

Rack mount sgC-4000HgsgC-4000Hg

12c


800-882-3214 /919-557-7300 www.apexinst.com

Apex Instruments Flow DrawerAFD-510The Apex AFD-510 is designed to be an easy, conve-nient, and compact way to control the flow of both stack and calibration gases.

This new panel can flow gas to either the analyzer bank(Direct calibrations) or the probe (System calibrations),and has both automatic and manual controls.

This unit has been designed with simplicity in mind.It has the same common solenoids and a simplifiedwiring protocol.

The calibration gas in use is identified by a LED along with which mode you are in and if you are sampling or calibrating. One big benefit of the Apex Instruments AFD-510 is that in sampling mode all solenoids areat “rest” which greatly extends the life of the unit.

aFD-510

Features• 11 Calibration Gas Channels (Including Zero and Span)• 5 Output or Analyzer Channels• 8 Valved Rotometers for Fine Flow Control/Adjustment 5 Analyzer Rotometers 1 Vent Rotometer 1 Probe Calibration 1 Sample Flow Rotometer• 19” Rack Mountable• Designed for Easy Maintenance and Repair• Manual or Automatic Operation

Specifications

Input Cal-Gas Channels: Flowmeters Standard: Sample 0-10 LPM Vent 0-10 LPM

Output Gas Channels: Flowmeters Available: 0-0.5 LPM 0-1.0 LPM 0-2.5 LPM 0-5.0 LPM

Voltage: 110.220 VAC, 50/60 Hz

Power: 25 Watts

Mounting Dimensions: 4U, 19” Rack Mount, 7” Height x 19” Width x 18” Depth

Weight: Approximately 24 lbs

Pressure Gauge: 0-15 psi

Connections: 1/4 Inch Stainless Steel Tube Union

AFD-510 Shown in Portable Gas Analysis Unit

AFD-510

13c


www.apexinst.com 800-882-3214 /919-557-7300

AMETEK Process InstrumentsManufacturer of individual analyzers and turn-key CEM rack systems for dry-basis monitoring of pollutants in flue gases. Analyzers are available for use in new or existing extractive CEM rack systems (or other instrument racks) where the sample gas entering the analyzer is non-condensing at ambient temperatures. www.ametekpi.com.

California Analytical InstrumentsCalifornia Analytical Instruments, Inc. (CAI) provides quality gas analyzers and systems used in Industrial, Environmental, Process and Automotive Emissions applications. CAI products include Infrared Analyzers; Chemiluminescence Analyzers, Oxygen Analyzers, Flame Ionization Analyzers, UV Fluorescence Analyzers, FTIR, Integrated Systems, Specialty Products, Photoa-coustic IR Analyzers. www.gasanalyzers.com.

BUHLER TechnologiesA broad range of applications like boiler trim, emission monitoring, ammonia slip monitoring, combustion efficiency, LEL warning indication or inner atmosphere control require analyzers with different measuring principles. Bühler offers optical, paramagnetic and zirconium technologies as well as tuned diode laser (TDL) gas analyzers. www.buhler-technologies.com/gas_analysis/products/analysers.

BRAND GAUSNOx, O2 and NOx-O2 gas analyzers specifically designed for use in continuous emissions monitoring systems (CEMS) for gas turbines; designed for reliability and simple operation; with industrial interfaces for continuous visible diagnostics and intuitive calibration without the use of delicate character displays or complicated menu systems. www.brandgaus.com.

ECOMECOM America Ltd., manufactures portable emission / combustion analyzers for many applications. From single gas Oxygen and Carbon Monoxide analyzers for flue gas testing to multi-gas analyzers measuring Oxygen, Carbon Monoxide, Nitric Oxide, Nitrogen Dioxide, Sulfur Dioxide, & Hydrocarbons offered in several configurations, we have instruments for most combustion applications. Several models are approved and recognized by Regional, State, and Federal Environmental and Air quality Regulatory AgenciesECOM. www.ecomusa.com.

ENVIRONICS AnalyticsKnown for computerized gas flow instrumentation; especially gas mixing technology, based on very precise control of thermal mass flow controllers, combined with Environics computerization and calibration results in improved accuracy to +/- 1% of setpoint.www.environics.com.

14c


800-882-3214 /919-557-7300 www.apexinst.com

BacharachBacharach, Inc. is a world leader in the design, manufacture, and service of advanced equipment for the measurement and detection of gases and liquids. The company’s extensive product line includes instruments that detect, measure, and record combustion and environ-mental gases, temperature, relative humidity, air velocity, and other air quality and safety parameters. A full line of refrigerant recovery equip-ment for residential, industrial, and automotive applications further extends Bacharach’s family of products. www.bacharach-inc.com.

NovaNova Analytical Systems Inc. has been designing and manu-facturing dependable gas analysis equipment for over 30 years. Nova offers portable gas analyzers, continuous gas analyzers and sample conditioning equipment for industrial applications. Nova’s integrated approach to design and manufacturing al-lows us to configure our products to suit each application, while still being able to offer the best price, long-term reliability and proven technology in each analyzer. www.nova-gas.com.

TELEDYNE INSTRUMENTS (API)TAPI offers products for continuous emissions monitoring, including: Ultraviolet Absorption Analyzers, Paramagnetic Analyzers,Infrared Gas Filter Correlation Analyzers, Nondis-persive Infrared (NDIR) Analyzers, Ultraviolet Fluorescence Analyzers, Chemiluminescence Analyzers.www.teledyne-api.com/overview.asp.

VIG INDUSTRIESOffers microprocessor controlled hydrocarbon analyz-ers; Dual or Single Channel (FID) flame ionization detector based (GC) gas chromatography, (VOC) volatile organic compounds, and (THC) total hydro-carbon analyzer systems. www.vigindustries.com/products.htm.

SERVOMExKnown for paramagnetic sensing technology and the development of zirconia, photometric, thick film and plasma technologies. The result is high-performance, cost-effective gas analysis, delivered through a portfolio of dependable products ranging from portable gas anal-ysers to complex process solutions. www.servomex.com/servomex/web/web.nsf/en/servopro-1440.

15c


www.apexinst.com 800-882-3214 /919-557-7300

Burrell Oxsorbent solution for determining oxygen in gas analysis, 8 oz bottles.

B39-710

Burrell Cosorbent, solution for determining Carbon Monoxide in gas analysis, 8 oz bottles.

B39-720

Burrell Disorbent solution for determining Carbon Dioxide in gas analysis, 16 oz, bottles.

B39-730

METHOD 3 ORSAT ANALYZER

Model Description

OG-1V/18 Burette, with 3-way Valve and Water Jacket, PTFE Valve Body, 100 mL, Scale 0-30% x .01

OG-2 Aspirator Bottle

OG-5V Contact Pipette, Valved, Insert Only

OG-5B Pipette Bottle with Hose Barb

GA-18C Solid Cap with #18 Threads and Seal

GA-30B Bored Cap with #30 Threads, 22 mm ID

GA-30S Silicone Seal Ring #30 Threads, 22 mm ID

TB-3V-P Tedlar® Bag,Three Compartment with three Poly Valves

TR-5/3 Black Rubber Tubing, 5/16” OD x 3/16” ID, per foot

VC2-50 VersaCase Clamp, 50 mm with Knurled Brass Thumb nuts

VSB3 VersaCase 3, with Hinged, Removable Doors and Mounting Rail

VSB2-MP VersaCase Mounting Plate

Orsat Accessories

Squeeze Bulb PumpThe heavy wall rubber Squeeze Bulb Pump with stainless steel valves and connections can be used for gas sampling, pressure source for calibrations and leak tests, and for conditioning probes and sample lines.

a-350

Method 3 determines CO2 and O2 concentrations and dry molecular weight of a sample from an effluent gas stream. The gas sample is analyzed for CO2 and O2 on a gas absorbtion basis, results are expressed in precentage units. For dry molecular weight determination, either an Orsat or a Fyrite analyzer may be used for the calculations.

The Orsat Analyzer Train is designed specifically for Method 3, for analysis of integrated or grab bag samples collected in Tedlar® bags. A liquid filled leveling bottle moves the integrated sample through a graduated glass burette and absorption pipettes containing absorbing reagents. The result-ing changes in volume measure percent of O2 , CO2 and CO. The burette is water jacketed for temperature stability.

VsC-33

Replacement Fluids

Domestic Delivery only. Sold by case (12 bottles per case). Drop shipped by vendor due to Hazardous Classification.

Packing List

VSB3

16c


800-882-3214 /919-557-7300 www.apexinst.com

COMBUSTION GAS ANALYZERS

Model Descritption

B10-5000 CO2 Fyrite® Gas Analyzer, Range 0-20%


USA KitsCO2 Testing

Model Descritption


Export Single Kits CO2 Testing

Model Descritption

B10-5020 CO2 & O2 Fyrite® Gas Analyzer, CO2 Range 0-20%, O2 Range 0-21%

B10-5021 CO2 & O2 Fyrite® Gas Analyzer for Export, CO2 Range 0-20%, O2 Range 0-21%- EXPORT ONLY.

Duplex Kits

Model Descritption

B10-5011 O2 Fyrite® Gas Analyzer, Range 0-21%


O2 TESTING

Model Descritption


O2 TESTING

Model Descritption

B11-7052 CO2 Fyrite® Gas Analyzer Repair Kit, Range 0-20% + 60%

B11-7054 O2 Fyrite® Gas Analyzer Repair Kit, Range 0-20% + 60%

Repair KitsIncludes a bottle of Fyrite® fluid, valve plunger gasket, top gasket, screws, diagram and envelope of filtering material.

FYRITE® GAS ANALYZERS

Fyrite® CO2

Fyrite® Gas Analyzers are fast, accurate and easy to use instruments for measuring and analyzing carbon dioxide or oxygen. Fyrite® Analyzers are available for either CO2 or O2 analysis. Fyrite® Indicators have a broad range; they may be exposed to ambient temperatures from -34° to 65°C (-30° to 150°F), and gases up to 450°C (850°F) may be tested with standard aspirator sampling equipment. Single analyzers and additional ranges are available along with refill and repair kits. Call for details.

Model Descritption

B11-7047 CO2 Fyrite® Gas Analyzer Refill Kit, Range 0-20% + 60%

B11-7050 O2 Fyrite® Gas Analyzer Refill Kit, Range 0-21% + 60%

Refill KitsIncludes two Bottles of Fyrite® Fluid, top gasket, screws and envelope of filtering material.

Model Descritption

B10-5057 CO2 Fyrite® Fluid , Range 0-20% + 60%, 3 (2oz.) Bottles per Case

B10-5060 O2 Fyrite® Fluid , Range 0-20% + 60%, 3 (2oz.) Bottles per Case

Fluids

For more information on Bacharach Products visit: www.bacharach-inc.com

17c


www.apexinst.com 800-882-3214 /919-557-7300

GAS SAMPLE FILTER HOUSINGS

SFA-116IL SFA-137G TFA-122P 760N-2

GAS SAMPLE FILTER ELEMENTSApex Instruments stocks two types of Borosilicate Glass Microfiber Cartridges to accomodate all particulate removal needs. For testing in locations where highly reactive and/or corrosive gases are present Apex offers the K-Type High Temperature with Fluorocarbon Resin Binders. The S-Type has low temperature cartridges with Inorganic Resin binders for filtering gases at temperatures up to 480°C (900°F).

Product Description: 10 per pack

GF123270K 12 mm x 32 mm, maximum temperature of 150°C (300°F)

GF125770K 25 mm x 57 mm, maximum temperature of150°C (300°F)



GF123270S 12 mm x 32 mm, maximum temperature of 480°C (900°F)



GAS SAMPLE FILTER ELEMENTS

Traditional in-line gas sample filters are used to remove particulate prior to analyzing to protect your valuable equipment. Replacement filters not included.

Product Description Temperature Rating Pressure Filters

SFA-116IL Stainless Steel, 1/4” FNPT, 3” Long. 200°C (400°F) 5000 PSIG 12 x 32mm, GF123270K, GF123270S

SFA-H130S-TE Stainless Steel, Heatable, 4.57” Long, 1/4” End Ports.

200°C (400°F) 30 PSIG 25 x 64mm, GF256470K, GF256470S

SFA-137G Glass Filter, T-Type, 1/4” FNPT, 4.49” Long. 200°C (400°F) 150 PSIG 25 x 64mm, GF256470K, GF256470S

TFA-122P PTFE, 1/4” FNPT, 3.86” Long. 150°C (300°F) 100 PSIG 12 x 57mm, GF125770K, GF125770S

760N-2 Nylon, Side Ports, 1/4” FNPT, 5.51” Long. 50°C (120°F) 100 PSIG 25 x 64mm, GF256470K, GF256470S

Filter Housing

OMNIFLOW FILTER HOLDERSThe Multi-Port Stainless Steel Filter Assembly has a 200°C (400°F) rating and is typically used for the filtering of combustion gases prior to analysis. The OmniFlow Filter Holder (N6) is spring loaded and designed for positive sealing. It features 6 ports (3 sample inlets, 1 calibration, 1 pressure and 1 sample exit). Each port is 1/4” FNPT (accepts 25” x 64” filters). Cable entry seals sold separately.

Three 1/4” Port Stainless Steel Filter AssemblyAccepts 25 mm x 64 mm filter.

sFa-2564-V2

SFA-2564-V2SFA-2564-4N6

Six Port Stainless Steel Filter AssemblyAccepts 25 mm x 64 mm Filter.

sFa-2564-4n6

Product Description

GF123270K Filter Cartridge, Borosilicate Glass Microfiber with Fluorocarbon Resin Binder, 12 x 32mm, Maximum Temperature 300°F, 10/pk.

GF123270S Filter Cartridge, Borosilicate Glass Microfiber with Inorganic Binder, 12 x 32mm, Maximum Temperature 900°F, 10/pk.

GF256470K Filter Cartridge, Borosilicate Glass Microfiber with Fluorocarbon Resin Binder, 25 x 64mm, Maximum Temperature 300°F - 10/pk.

FiltersProduct Description


GF125770K Filter Cartridge, Borosilicate Glass Microfiber with Fluorocarbon Resin Binder, 12 x 57mm, Maximum Temperature 300°F, 10/pk.


18c


800-882-3214 /919-557-7300 www.apexinst.com

CONDENSERS

SC-9A SC-9A

SC-9U

Inlet

Apex Instruments Stainless Steel Condensers are designed to be submerged in an ice-water bath for condensing and removing water vapor prior to analysis. Use in conjunction with the peristaltic pump (see recommended pump below) to continuously remove the condensate. Condensers are recommended to be used in a series of two or more. Custom-made condensers available please call for details on water jacketed condensers, chillers and appropriate pumps.Stainless steel condenser assembly with vessel, cap with Inner tube, clamp and gasket. Two 3/8” Ports and 1/4” drain tube.sC-9a

Adapter, 3/8” button hook adapter for connecting condenser in series. sC-9u

Borosilicate Glass CondensersApex Instruments offers two types of borosilicate glass condensers. The products include caps and seals.

The Double-Headed Single-Speed Peristaltic Pump (PP927-049) is ideal for removal of condensate from glass and stainless steel condens-ers. Each head provides a flow rate of 98cc/min. and can be used for two independent uses or combined when needed to increase the flow rate or pressure capability. Additional peristaltic pumps are available.

PP927-049

Single speed, dual head peristaltic pump, 49 rev/min, flow rate 98 ml/min per head.

PERISTALTIC PUMP

Product DescriptionVGC-9 Glass Condenser-9” x 2” OD, 3/8” tube unions for inlet & outlet, 1/4” drain tube. NO SEALS.

VGC-12 Glass Condenser-12” x 2” OD, 3/8” tube unions for inlet & outlet, 1/4” drain tube, water jacket. NO SEALS.

VGC-12M Glass Condenser-12” x 2” OD, with GL-18 threads for inlet, outlet & drain, threads accept 1/4” or 3/8” with proper seal, water jacket.

VGC-12MA Glass Condenser-12” x 2” OD, with GL-18 threads for inlet, outlet & drain, threads accept 1/4” or 3/8” with proper seal, water jacket w/caps & seals.

The VGA-12A Condenser allows the flow of ice water around the sample stream. Glass condenser with 3/8” tube unions for inlet and outlet, 1/4” drain on bottom, water jacket, 2” OD, 12” height.VgC-12a

The VGA-9A Condenser is designed to be submerged in an ice-water bath for condensing water vapor. Glass condenser, coaxial design with 3/8” tube unions for inlet and outlet, 1/4” drain tube, 2” OD, 9” height.VgC-9a

VGC-12AVGC-9A

19c


www.apexinst.com 800-882-3214 /919-557-7300

Gas Analysis Equipment

Apex Dilution Panel .................................... 8cApex Flow Draw ......................................... 12cCombustion Gas Analyzers ........................ 16cCondensers ................................................ 18cCondensers, Borosilicate Glass ................. 18cFilter Assemblies ........................................ 6cFilter Holders .............................................. 6cGas Sample Filter Elements ....................... 6cGas Conditioners ........................................ 11cGas Analyzers ............................................ 13c-14cGas Sample Filter Housing......................... 17cGas Sample Filter Elements ....................... 17cIRM, Transportable IRM System ................ 3c

Method 3, Orsat Analyzer ........................... 15cPMI Dilution Probe...................................... 8c Pre-Filters ................................................... 4cPro-Series Heated Sample Line ................. 9cProbe, Assemblies ...................................... 5cProbe, CEM ................................................ 5cProbe, IRM ................................................. 4cProbe, IRM Ceramic Heater ....................... 5cProbe, Stainless Steel Liners ..................... 5cPumps, Peristaltic ....................................... 18cTemperature Controllers ............................. 10c Tri-Sample Probe ....................................... 7c

www.apexinst.com

919-557-7300 or 800-882-3214Fax: 919-557-7110




Accessories cAtAlog

Software

Tubing & Filters

Balances

37d www.apexinst.com 800-882-3214 /919-557-7300

ACCESSORIES





We back up this commitment with extensive knowledge of our products, good communication and an excellent customer service history. Our equipment isdesigned by experienced stack testers who know what you face when performing compliance testing.








Local: 1-919-557-7300fax: 1-919-557-7110


www.apexinst.com


[email protected]





[email protected]


ACCESSORIES


MERCURY AND gAS SAMPLINg SYSTEMS & EQUIPMENT

gAS ANALYSIS EQUIPMENT

APPENDIX

INDEX

ISOKINETIC SAMPLINg EQUIPMENT





Solutions for Source Sampling Equipment

Apex Instruments is a world leader in the manufacture, design and distribution of source sampling equipment. We are located approximately 20 miles from the United States Environmental Protection Agency (U.S. EPA) in Research Triangle Park, North Carolina. Our equipment complies with emissions measurement standards for stationary combustion sources in accordance with EPA guidelines. Depend on Apex Instruments to provide you with the proper, well-engineered equipment for consistent, accurate and reliable results.

TECHNICAL SERVICESApex Instruments understands the needs and high demands of the individuals working in the source sampling industry. Government agencies, consulting firms and private industries throughout North America and 50 countries around the globe, are the primary users of our equipment. Our knowledgeable staff includes skilled industry professionals, stack testers and chemists. They can help you make important decisions regarding your specific application needs.

CUSTOM FABRICATION & ASSEMBLYApex Instruments’ custom-designed facility was built in 2005. We design, build and expedite all equipment orders quickly through our in-house engineering, production and welding departments. We continue our steady commitment to quality in compliance testing by consistently designing and developing reliable source sampling equipment. We follow guidelines set by U.S. EPA Reference Methods and always keep the genuine needs of the stack samplers in mind.

CALIBRATION SERVICESApex Instruments offers dedicated, climate-controlled, precision calibration services for a variety of measuring instruments to keep your gas meter, orifice and pitot tube calibrations up-to-date. Our trained staff utilizes reliable calibration equipment and tools like the NIST Certified Bell Prover, wet test meters, electronic flow calibrators and wind tunnels. We offer a certificate of calibration when requested.

AWARDSApex Instruments received the Safety and Health Achievement Award (SHARP) from the North Carolina Department of Labor. The program recognizes small to medium size businesses that establish and maintain effective safety standards and health programs. We were also ranked in the top 500 by Inc. Magazine as being one of the fastest growing privately held companies.

ACCESSORIES

Mercury Replacement Parts, XC-522 / XC572 Components ...............................................3d - 10d Filter Media .................................................11d - 12d Sample Recovery, Bottles ......................13d - 14dPFA Components and Fittings ...............15d Balances ...................................................16d - 17d

Desiccator and Desiccants ........................18dSilica Gel, Drierite® Desiccants Dew-Point Meters .......................................19dCam-Lock, FlangesPort Adapters & Packing Glands ..........20d - 21d Meter Calibration ........................................22d

Calibration Equipment & Services ........22d - 23dOrifice Flow Meters, Flow Meters ..............................................24dInclinometers ............................................25d

Tubing, Dry Gas Meters,Electrical / Electronic Parts ....................26d - 27dStainless Steel Fittings, Quick Connects .......................................28d - 29dPumps & Accessories, Equipment Cases ....................................30d- 31dMonorails, Manuals & Reference Materials ............................32d - 34dIsokinetic Calculator& Spread Sheet, Software .....................35dAccessories Index ...................................36d


ACCESSORIES

MERCURY SPARE AND REPLACEMENT PARTS

Model DescriptionM-PCB-DACV3A Populated Printed Circuit Board for Data Acquisition and Control (DAC) for XC-6000EPC, Dual PC-Based Hg ConsolePCB-TC/MUX Populated TC/Mux Board for Use in XC-6000EPC Mercury Console, 8 Type K TC Channels with External Signal

and Moisture Analyzer InputsPCB-LED-HG Board, LED DisplayEL-PCB-MODBUS-1 Board, TCP/IP Modbus InterfaceEL-CAT55FT Cable, Ethernet CAT 5.5 FT (blue)EL-SDCARD A-DATA Speedy 1GB Secure Digital (SD) Flash Card Model SDC-1G0EL-EBR-2310 D-Link Router, IEEE 802.3/3u, IEEE 802.11b/g Wireless-G Broadband Router, Used in Meter Consoles in Storm

Case Enclosure onlyEL-WBR-1310 D-Link Router, WBR-1310 Router - 54Mbps, 802.11g, 4-Port, Used in Meter Consoles in SKB, Environmental EnclosuresGP-C131-11 Pump, BTC Diaphragm Pump, Brushless Motor, 10,000 HR, Max Vacuum 20”HG, 12VDC, 3900 RPM, Max PSIG 24”GP-D737B-2201 Pump Diaphragm Hargrave Replacement Pump for XC-30B and XC-260 Meter ConsolesDGM-AP25-5701 Dry Gas Meter w 5701 Optical Encoder, Metric, Model AP25 with Bushings and FittingsDGM-AP25K Replacement Kit for DGM-AP25-5701 with Optical Encoder & Adapter Plate for Use in Replacing DGM-SK25-5701DGM-APADPT Adapter Plate Kit for DGM-AP25-5701DGMC-3A-LF Pre-test 3 Point Low-Flow (less than 1Lpm) Calibration for Apex Meter Console. 900, 600, 300 ccm TOT4-36X72 Quadrature Pulse Digital Totalizer 36 X 72 DINAK-6000 Deluxe Mercury Audit Kit for Appendix K/Method 30B System Includes: SK25 DGM with 15-pt Calibration, Quadrature

Totalizer, Vaccum Gauge, 4U Black Polyethylene Molded Case, Handheld Type K Thermocouple Simulator with Certificate, Hand-Held Digital Barometer, Digital Thermometer, Vacuum Bottle

QC-ADAPTER-1/4” 1/4” Quick Connect Mercury Audit Kit AdapterEL-670-OA938 AC Fan, 92mm ,115VAC, 50CFMMA4-20SIM Simulator,4-20mA, with Enclosure, Connector, Power Switch, & PotentiometerAWM-4360 Airflow Sensor, Signal Conditioning: Amplified; Flow/Pressure Range: + 6000 sccm (6.0 SLPM); Linear Range 1LPM; Port

Style: Manifold, (Flow Controller)XC-6K-PGMC Programming Cable for XC-6000EPC Automated Mercury Sorbent Trap Metering ConsoleM-AM2312 Valve, 3-Way, .055/.048 Orifice, 12V VSO-1SV Valve, Solenoid, Proportional. Model VSONC-3S11-IC-FO Manifold Mount with Wire Leads and 11.5VDCSP-PSE541-M5 Sensor, Pressure, 0-30” Hg, 1 NPN/PNP Open Collector Transistor Output, 30VDC, 125mA

BARO-A-4V Barometric Pressure Sensor, 600 to 1100 mbar, Temperature Compensated, Amplified OutputM-CBR10A-M Electrical Breaker, 10A, Panel Mount Magnetic Type Circuit Breaker Rocker Switch, 10 Amp. Horizontal Mount.

Typically Used in 120V Consoles as Probe/Oven Breaker SwitchM-CB15A-M Electrical Breaker, 15A, Panel Mount Magnetic Type Circuit Breaker, 15 Amp. Typically Used in 120V Consoles

as Main BreakerD-60A Power Supply, 5V@6A, 12V@4AEL-P1082-031 Connector, A TO B USB, Panel MountEL-TL5242W Memory Backup Lithium Batteries 3.6V 2.1Ah Battery PackPCB-BATTERY Battery Interface Board with Short-Term Capacitor Backup for Use with XC-6000 DAC BoardTC-PJK ThermoCouple Jack, Type K, Panel, Snap-InAM-T3107000 C16-1 Series Amphenol Circular Connector. High Grade Plastic for Harsh Environmental Conditions.

Panel Mount Straight Female Slots, 7 Slot (6 + Ground (First Mate/Last Break)AM-T3108 C16 Amphenol Circular Connector, 4 Pin (Cable Straight Male), Probe / Trap Heater Power Connection, Console SideAM-T3109 C16-1 Amphenol Circular Connector, 4 Socket (Cable Straight Female), Probe / Trap Heater Power Connection, Probe SideXC-6K-MANI Manifold Subassy, XC-6000EPC - Service Replacement Manifold Subassembly Includes Vacuum Sensor,

Mass-Flow Sensor, 2-Way Manifold Valve, Proportional Valve, Stainless Steel Hose Barb Fitting. AssemblyCalibration Data to be Provided with this Unit.

DIF-N70 Disposable In-Line Filter, Nylon Housing with 1/4” Tube Stubs, 95%+ Efficiency for 0.1 Micron

CONSOLE REPLACEMENT AND SPARE PARTS

4d 800-882-3214 /919-557-7300 www.apexinst.com

ACCESSORIES

CONSOLE

M-PCB-DACV3A

EL-PCB-MODBUS-1

EL-WBR-1310

TOT4-36X72Quadrature Pulse Digital Totalizer36 X 72 DIN.

Populated Printed Circuit Board for Data Acquisition and Control (DAC) for XC-6000EPC, Dual PC-Based Hg Console.

PCB-LED-HgBoard, LED Display.Board, TCP/IP Modbus Interface.

EL-EBR-2310D-Link Router, IEEE 802.3/3u, 11b/g Wireless-G Broadband Router, Usedin Meter Consoles in Storm CaseEnclosure only.

D-Link Router, WBR-1310 Router - 54Mbps, 802.11g, 4-Port, Used in Meter Consoles in SKB, Environmental Enclosures.

DgM-AP25-5701

DgM-APADPTAdapter Plate Kit for DGM-AP25-5701.

Dry Gas Meter w 5701 Optical Encoder, Metric, Model AP25 with Bushings and Fittings.

$404.00

PCB-TC/MUX

EL-SDCARD

Populated TC/Mux Board for Use inXC-6000EPC Mercury Console, 8 Type K TC Channels with External Signal and Moisture Analyzer Inputs.

A-DATA Speedy 1GB Secure Digital (SD) Flash Card Model SDC-1G0.

gP-C131-11Pump, BTC Diaphragm Pump, Brushless Motor, 10,000 HR, Max Vacuum 20”HG, 12VDC, 3900 RPM, Max PSIG 24” for XC-6000EPC.

DIF-N70Disposable In-Line Filter, Nylon Housing with 1/4” tube stubs, 95%+ Efficiency for 0.1 Micron.

gP-D737B-2201Pump Diaphragm Hargrave Replacement Pump for XC-30B and XC-260 Meter Consoles.

Adapter Plate Sold Separately.


ACCESSORIES

CONSOLE

AK-6000 Audit KitDeluxe Mercury Audit Kit for Appendix K/Method 30B System Includes: AP25 DGM with 15-pt Calibration, Quadrature Totalizer, Vaccum Gauge, 4U Black Poly-ethylene Molded Case, Handheld Type K Thermocouple Simulator with Certificate, Hand-Held Digital Barometer, Digital Thermometer, Vacuum Bottle.

XC-6K-PgMCProgramming Cable for XC-6000EPC Automated Mercury Sorbent Trap Metering Console.

Magnetic Type Circuit Breaker Rocker Switch,10 Amp. Horizontal Mount. Typically Used in 120V Consoles as Probe/Oven Breaker Switch.

EL-TL5242WMemory Backup Lithium Batteries 3.6V 2.1AhBattery Pack.

VSO-1SVValve, Solenoid,ProportionalModel VSONC-3S11-IC-FO Manifold Mount with Wire Leads and 11.5VDC.

EL-670-OA938AC Fan 92mm 115VAC 50CFM.

AWM-4360Airflow Sensor, Signal Conditioning: Amplified; Flow/Pressure Range: + 6000 sccm (6.0 SLPM); Linear Range 1LPM; Port Style: Manifold.

M-AM2312Valve, 3-WAY, .055/.048 Orifice, 12V.

Kit Includes: Secondary Reference MeterDGM-AP25SRD

Thermocouple SimulatorM5C-520

Handheld Digital BarometerBAR-4198

36” Thermocouple Type KTCA-36HG

6” Thermocouple Y AdapterTCA-6YHG

Handheld WaterproofThermometerDPT-168-NIST

Insulated Ice BathAK-6TH16

DgM-AP25SRD

M5C-520 BAR-4198

DPT-168-NIST

TCA-36Hg

TCA-6YHgAK-6TH16

M-CBR10A-MM-CBR15A-M


ACCESSORIES

CONSOLE

26809 AM-SP100A M-SD31

Battery Interface Board with Short-Term Capacitor Backup.

Thermocouple Jack, Type K, Panel, Snap-In.

Mounting Clip for Aluma-Sorb Cartridge. Fan, for Stirling Chiller, 115V, Mechatronics. Temperature Controller, Red LED, Watlow.

BARO-A-4VBarometric Pressure Sensor, 600 to 1100 mbar, Temperature Compensated, Amplified Output.

EL-P1082-031Connector, A to B USB, Panel Mount.

SP-PSE541-M5Sensor, Pressure, 0-30” Hg, 1 NPN/PNP Open Collector Transistor Output, 30VDC, 125mA.

TC-PJKPCB-BATTERY

AH-610-AHousing, Adsorption, Assembly with 1/4” Fittings and Filled with Aluma-Sorb.

COOLER

M-PSRS7512Power Supply, 75W, 12V, 6 AMP, Input: 100-240VAC.

D-60APower Supply 5V@6A, 12V@ 4A, Meanwell.

M-PCB-REg-ARegulator PCB Assembly 5V, for Use with M-PSRS7512.

COOLER COOLER

COOLERCOOLER COOLER


ACCESSORIES

CONSOLE AND COOLER

AM-T3109C16-1 Amphenol Circular Connector, 4 Socket (Cable Straight Female), Probe / Trap Heater Power Connection, Probe Side.

AM-T3108C16 Amphenol Circular Connector, 4 Pin (Cable Straight Male), Probe / Trap Heater Power Connection, Console Side.

HgH-2T144WReplacement Probe Heater, 2-ft, 575 Watt. (used on all probes, exit end of probe).

PROBE

HgH-4T463WReplacement Probe Heater, 4-ft, 463 Watt.

HgH-5T1650WReplacement Probe Heater, 5-ft, 1650 Watt.

HgH-STRI72Replacement Probe Heater, 6-ft, 2000 Watt.

SSR-330-25Relay, SSRT, 25A 110/240V.

XC-6K-MANIManifold Subassy, XC-6000EPC - ServiceReplacement Manifold Subassembly IncludesVacuum Sensor, Mass-Flow Sensor, 2-WayManifold Valve, Proportional Valve, StainlessSteel Hose Barb Fittings.

HgH-9T838WReplacement Probe Heater, 9-ft, 838W.

HgH-12T1000WReplacement Probe Heater, 12-ft, 1000W.

AM-T3107000C16-1 Series Amphenol Circular Connector.High Grade Plastic for Harsh EnvironmentalConditions. Panel-Mount Straight Female Slots,7 Slot (6 + Ground (First Mate/Last Break).

HEATED UMBILICAL / SAMPLE LINE

PROBE PROBE

COOLER


ACCESSORIES

HGP-SHIELD-S-EXT-6HGP-SHIELD-C-EXT-6

HGP-STASmall Trap (6mm) Adapter for Mercury Probes. Includes 10MTUR6M-S (with 10mm Nut and ferrule) and Three 1/4” Ceramic Ferrules.

SGC-J10-30B10-Ft Jumper, For Use with Portable Hg System, Gas Conditioner and Portable Hg Console.

ALUMA-SORBActivated Alumina Dessicant, Highly Efficient Adsorbent with High Porosity and Contact Surface. 1/8” Diameter Beads, 2.5Kg (5.5 LB) Container with 80% Active Alumina (>/= 92%) and 20% Silica Gel.

GA-GL-45SSeal for 1000 ml Bottle.

QC-PMC2QC, Stirling Gas Conditioner, Male, Straight Connector, 1/4” O.D. PTF,1/8” O.D. X.170” I.D. (Used on DrieriteCartridge Outlet/Top) – Threaded Male.

QC-SGC-M2QC, Stirling Gas Conditioner, Straight Connector, Ferruless Polytube Fitting, PTF, 1/4” O.D. X.170” I.D. (Heated U-Cord Sample Line to Stirling, High-SO2 Connector) – Tube-Mount Male.

QC-SGC-F4QC, Stirling Gas Conditioner, Female,Coupling Body 1/4” O.D. (Used on Stirling Cooler Sample in Connection).

PROBE

Thermocouple Plug Assembly, Mini,Type K, Male.

TC-SP-KA

SGC-J55-Ft Jumper, For Use in 18U Hg System. For Use with Rack Mount Gas Conditioner in 18U Cabinet.

SGC-J10-6K10-Ft Jumper for Use with Portable Gas Conditioner and Portable Model XC-6000 Hg Meter Console.

Mercury Sorbent Trap Shields HGP-SHIELD-S-EXT ShieldsStainless Steel Trap Shield Available in 6” Long x 2” O.D. Diameter. Recommended for short sampling runs, such as those required by Method 30B.

HGP-SHIELD-C-EXT ShieldsC276 Alloy Trap Shield Available in 6” Long x 2” O.D. Diameter. Recommended for corrosive environments and long continuous sampling runs (5 to 7 days).


ACCESSORIES

10M-F-TgFerrule, 10MM, Single, Glass Filled Teflon.

10 M-F-Tg-DZ

PROBE

10MMNU-SNut, 10MM Tube, Stainless Steel.

10MMNU-S-EXTParticulate Shield for 10MM Sorbent Trap Stainless Steel Tube, 3/4” O.D. x 1.25” L with 10mm Nut, Welded.

10MMNU-C-EXTParticulate Shield for 10MM Sorbent Trap, C276 Hastelloy C276 Tube, 3/4” O.D. x 1.25” L with 10mm Nut, Welded.

4NU-SNut, 1/4 Tube, Stainless Steel.

SR-2.625Neoprene Square Ring, 2” I.D. x 2-5/8” O.D. x 3/16” T.K., for Cam-Lock Connectors.

gSB-500SC

SPARES / CONSUMABLE

Sample Bottle, Clear Glass, GL-45 Threaded, 500mL Safety Coated, for Condensate Collec-tion, Used in 16U Shock Mount Rack Chiller.

gSB-250SCBottle, Sample, Clear Glass, GL-45 Threaded, 250mL with Safety Coat Sample Bottle, 250mL, Used in SC-40 Con-densate Collection Ice Bath.

gSB-1000SCSample Bottle, Clear Glass,GL-45 Threaded,1000mL Safety Coated,for Condensate Collection.

gSB-1000SCASample Bottle, Assembled, Clear Glass,GL-45 Threaded,1000mL Safety Coated,for Condensate Collection.Assembly includes GA-GL-45B, GA-GL-45S.


ACCESSORIES

XC-522 and XC-572 Components ListPart Number Description TC-765KF Display, TC, PNI, LED, 120/220V M-SD31 Controller, Temp, Red LED, Watlow MC-T Timer, MC, Veeder-Root M-SCKT15A Conn, Pwr, IEC Inlet 15A/250V M-49BK Recept, EL, Snap-In, Term M-31302A Switch, TC. 7 Channel TC-PJK TC Jack, Type K, PNL, Snap-In QC-BHF8-SS QC, Blkhd, 1/2IN-1/2TU, F, SS QC-BHF4-SS QC, Blkhd, 1/4IN-1/4TU, F, SS QC-BHF6-SS QC, Blkhd, 3/8IN-3/8TU, F, SS QC-BHM6-SS QC, Blkhd, 3/8IN-3/8TU, M, SS B2VH-6S Valve, Ball, 3/8TU, SS, PNL, Nut NV3HA-6S Valve, Needle, Angle, 3/8T-3/8T, S DGM-110 Meter, Dry Gas, 110 Rockwell G301U Gage, Vac, 0-30HG, 1.5IN, PNL M-42210 Manometer, Dual, PNL, 0-10” H2 QC-MAN-F3 QC-Manometer, F-1/8MNPT, S

1234567891011121314151617

Part Number Description QC-MAN-M2 QC-Manometer, M-1/4HB, Delrin XC-10U Black RotoRack Shallow Case M-RA911 Switch, Curvette, EC Comp., I-O AM-MCP Replacement Meter Console Wired Amphenol Sub-Assembly M-422B Bracket, Manometer, Adjust, Stainless Steel M-422DS Manometer Displacer Knob L-441160 Latch, Panel, Screw, Large, Sou 3439T12 Webbing, 2”, Black Nylon M-CBR5A-M Magnetic Type Circuit Breaker Rocker Switch, 5 Amp., 120V M-CBR3A-M Magnetic Type Circuit Breaker Rocker Switch, 3 Amp., 240V

18192021

22

23242526

27

xc-522 Source Sampling conSole (engliSh) xc-572 Source Sampling conSole (meTric)

TC-765KF

Temperature Display

Manometer Quick Connects

Fine Control Valve



Standard Stainless Steel Pitot Quick

Connects

Standard Stainless Steel Sample Quick Connect

Standard StainlessSteel Female Pump Connection (Pressure)

UmbilicalCable Power Connection


7-ChannelTemperature

Selector Switch

Vacuum Gauge

Elapsed Timer



Controllers

Stainless Steel MaleNon-Reversible Pump


Strap

9

10

11

1

7

XC-10U19

13

4

21

ElectricReceptacle

Power Connect Inlet

25 3439T12


24 L-441160

XC-522 Dry English Gas Meter14 DgM-110

CoarseControl Valve

12 B2VH-6S

Dual Column

Manometer

16 M-42210

1718 QC-MAN-M2

QC-MAN-F32 M-SD31

MC-T

g301U

3

15

M-31302A 6

TC-PJK

QC-BHM6-SS

QC-BHF6-SS

5M-49BK

QC-BHF8-SS8

QC-BHF4-SSAM-MCP NV3HA-6S

M-422B22

M-422DS23

Rocker Switches

M-RA91120

M-SCKT15A

xc-522

28 DgM-AP25

XC-572 Dry Metric Gas Meter

XC-572 (Metric) DGM-AP25 Meter, Dry Gas, AP25 W/Union 28

Magnetic Type Circuit Breaker Rocker Switch

M-CBR3A-M27

M-CBR5A-M26

Call for information on 110V / 240V Models.


ACCESSORIES

Apex Instruments offers a wide range of filter media to meet any sampling requirements. Listed below are the standard media and sizes that Apex Instruments normally stock. Additional materials and sizes are available upon request.

FILTER MEDIA

QUARTZ FIBER FILTERSQuartz Fiber Filters are manufactured from pure quartz with-out a binder and are frequently used for sampling for metals analyses and acidic gases.

Model DescriptionGF-2Q 2 inch Quartz Fiber Filters-25/box

GF-25Q 25mm Quartz Fiber Filters-100/box


GF-4Q 4 inch Quartz Fiber Filters-25/box (Pallflex 11 cm)



GF-54Q 54mm Quartz Fiber Filters-25/box (Pallflex 54mm)

GF-63Q 63.5mm Quartz Fiber Filters-25/box (Pallflex 63.5mm)





gLASS FIBER FILTERSGlass Fiber Filters are most commonly used filters for particulate sampling. All of the glass fiber filters are binder free and exhibit at least 99.9% efficiency for 0.3 micron dioctyl phthalate (DOP) smoke particles. Not recommended for metals analysis.

grade E FIBER FILTERSIdeally suited for suspended solids analysis and high volume air monitoring applications. Softening point of glass fiber is 500°C, therefore upper limit temperature in use is 475°C. Low fiber shedding improves quality assurance of test results. high loading capacity. This media meets requirements for standard method 2540D and EPA Method 160.2 for establishing water quality in suspended solids content.

Model DescriptionGF-2 2 inch Glass Fiber Filters-100/box

(934AH-5.5cm)

GF-2X6.5 2x6.5 inch Glass Fiber Filters-100/box (934AH)

GF-3 3 inch Glass Fiber Filters-100/box (934AH-8.26cm)

GF-4 4 inch Glass Fiber Filters-100/box (934-AH-11cm)

GF-45 45mm Glass Fiber Filters-100/box (934-AH-45mm)

GF-47 47mm Glass Fiber Filters-100/box(934AH-4.7cm)

GF-63 63.5mm Glass Fiber Filters-100/box (934-AH-63.5mm)

GF-90 90mm Glass Fiber Filters-100/Box (934AH-9.0cm)






gLASS FIBER FILTERS


ACCESSORIES

PTFE COATED GLASS FIBER FILTERS PTFE Coated Glass Fiber Filters are constructed from borosilicate microfibers and bonded with PTFE. The filters can be folded & handled without loss of fibers. Great for especially low loading rates. Specifically recommended for Method 26 & PM10 sampling.

Product DescriptionGF-2T 2 inch PTFE Coated Glass

Fiber Filters-100/box

GF-3T 3 inch PTFE Coated Glass Fiber Filters-100/box (Pallflex 82.6mm)

GF-4T 4 inch PTFE Coated Glass Fiber Filters-100/box (Pallflex 11cm)

GF-25T 25mm PTFE Coated Glass Fiber Filters-100/box (Pallflex 2.5 cm)

GF-47T 47mm PTFE Coated Glass Fiber Filters-100/box (Pallflex 4.7cm)


PTFE FILTER MEMBRANESPTFE Filter Membranes are produced of pure PTFE resins. They withstand the most severely corrosive conditions at temperatures as high as 500°F (260°C) and down to the cryogenic range. The membrane is hydrophobic and maintains its strength wet or dry.

Model DescriptionTF1121 PTFE Membrane, 47mm,

0.45 Micron (10/pack)




Product DescriptionGF-90T 90mm PTFE Coated Glass Fiber Filters-100/box

(Pallflex 90mm)


GF-3TPG 3 inch PTFE Coated Glass Fiber Filters-50/box (MFS PG60) 82mm-Hydrophobic, Low absorption of acid gases such as SOX or NOX.

GF-4TPG 4" PTFE Coated Glass Fiber Filters-50/box (MFS PG60) 110mm-Hydrophobic, Low absorption of acid gases such as SOX or NOX.



Model Description PriceGF-300C Alundum Thimble, medium porosity, 5+ micron retention, 34x100ml,

round bottom, fits SFA-300 use with additional O-ring, O-123V. $52.00

GF-300-C Alundum Thimble, COARSE porosity, 20 micron retention, 34x100ml, round bottom, fits SFA-300 use with additional O-ring, O-123V.

$54.00

gF-300C

IN-STACK THIMBLES AND ACCESSORIES Apex Instruments stocks a variety of Fiber Thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters and available from a choice of two different types of fibers: Borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid washed to reduce the trace metal content to an absolute minimum. Quartz fiber thimbles are strengthened with alumina and are prefired at 900°C for 2 hours during manufacturing to stabilize the weight prior to use. The gas collection efficiency of the thimbles is 99.9% (0.3 micron DOP). The 25 x 90mm thimbles are specifically manufactured for stack sampling and tapered for ease in loading. Cellulose thimbles are available upon request.

gF-2590Q

Model DescriptionTF1165 PTFE Membrane, 25mm, 30-60 Micron (10/Pack)

GF-3TM 3 inch PTFE Membrane Filters-50/box (82.6mm) PTFE filter media provides durability for hostile acid aerosol monitoring. 1.0µm pore size membrane.


Model DescriptionGF-190Q 19X90mm Quartz Fiber Filter


GF-300Q 30x100mm Quartz Fiber Filter Thimble-25/box (For SFA-300) grade 88R

GF-2590Q 25x90mm Tapered Quartz Fiber Thimble-10/box (For SFA-2590) Grade 88R

QUARTZ FIBER THIMBLESModel DescriptionGF-190 19x90mm Glass Fiber Filter


GF-2590 25x90mm Tapered Glass Fiber Thimble -10/box (For SFA-2590) Grade 86R

GF-300 30x100mm Glass Fiber Filter Thimble-25/box (For SFA-300) Grade 86R

GLASS FIBER FILTER THIMBLES

ACETATE FILTERGF-47MMAT - FILTER, ACETATE, 47MM,.45 PORE, 100/PK. This filter is used in the SK-0061H system for sampling Hexavalent Chromium.

ALUNDUM® THIMBLES (CERAMIC)Alundum® Thimbles are used for in-stack filtration for process engineering studies when a large sample is needed for analyses. These thimbles are made from fused alumina oxide and remain very constant in weight and can be re-used an infinite number of times. There are two different porosity thimbles that can be used in the SFA-300 thimble holder. The medium porosity retain particles 5 micron and larger and the coarse retain particles 20 micron and larger.


ACCESSORIES

PTFE Probe Brush Extensions The flexible PTFE Probe Brush Extension attaches to the PBT-5/8 or PB-5/8. Made with 8/32 threads with a phenolic knob. Please specify length.

PTFE Probe BrushAll PTFE construction. The PBT-5/8” diameter with four spiral rows of black PTFE bristles. Over all length is 2”. The shaft is 1/4” diameter with 8-32 female threads. PTFE Barrel and PTFE Bristles.PBT-5/8

SAMPLE RECOVERY

PBT-5/8

NB-SET

B-3

B-4

PBX-S

Modular Probe Brush Set The PBX-S Modular Probe Brush Set contains two of the 5/8” stainless steel twisted wire brushes with nylon bristles and a total of 13’ in stainless steel extensions.PBX-S

Model Description

PB- 5/8A Probe Brush/Stainless Steel, Nylon Bristles & Allen Set Screw (HD1088)



PBK-832 Probe Brush Knob

NOZZLE BRUSH SET The NB-SET Nozzle Brush Set includes one each of the three most popular sizes in a convenient carrying tube. (#3,#5,#8)NB-SET

B-1

Impinger Bottle Brush with Plastic Handle and Nylon Bristles.B-1

Impinger Bottle Brush

B-2

Flask Brush, Stainless Steel Handle and Nylon Bristles.B-2

Flask Brush

Filter Brush, 3/16” diameter, Stainless Steel Handle and Nylon Bristles, 5/16”.B-3

Filter Recovery Brush

Rubber Policeman with 18” Delrin® HandleB-4

Policeman

Model Description






Brush Sold Separately

PTFE NOZZLE BRUSHES Nozzle Brush NBT-1/2 is constructed of pure PTFE featuring a 1/8” diameter shaft with 1/2” long soft PTFE bristles. NBT-1/2

NBT-1/2

PBX- T

NOZZLE BRUSHES Apex Instruments Nozzle Brushes feature stainless steel handle and nylon bristles. Super flexible for cleaning button hook nozzles with eye tip to reduce scarring of the nozzle.

Model Description




NB-5

NB-8NB-3

20 ft.Teflon Sample Line Brush, 1/8” diameter rod with 1/2” long bristles B-5

Sample Line Brush


ACCESSORIES

POLYETHYLENE SAMPLE BOTTLES

Wide Mouth Bottles for Easy Filling and Pouring. The HDPE bottle with polypropylene closures are made of FDA compliant material. Recycling code molded into base of bottles. Simple to pour-wide mouth bottles. Chemically resistant. Leak proof, firm. Excellent for packaging chemicals, pharmaceuticals and adhesives.

WB-1W - 125 mL vw/Wide Mouth, w/Cap.

WB-2p - 250 mL w/Cap.


WB-4p - 16oz./500 mL w/Wide Mouth.

WB-10p - 1000 mL w/Wide Mouth.


250ML-CYL-PMP

Aluminum Weighing Dishes (70 ml)100/pack.25433-062

Aluminum Weighing Dishes 100 Pack (12.1 cm) 12175-001

Petri Dish 100x15mm PL 25/pack (for 3-inch filters), Polystyrene. 25373-1100

Petri Dish 150x15mm PL 10/pack (for 4-inch filters), Polystyrene.25373-187

graduated Cylinder 250ml, Plastic250ML-CYL-PMP

graduated Cylinder 250ml, Glass250ML-CYL

TW-1

Nylon TweezersTW-1

Polypropylene FunnelTop Diameter 108mm.

30255

Funnel Parafilm M, Laboratory Sealing Film, Roll is 2” x 250 ft.PARA-2X250

Synthetic Cotton Balls (For Impinger Outlet Filter), 300/bagMS-1

Cotton Balls

SAMPLE RECOVERY BOTTLES

FEP WASH BOTTLE500mL Wash Bottles, FEP.WB-500Fep

WB-500FEP

gSB-250

gLASS BOTTLES250mL Glass Sample Bottles with PFA-Lined Lid.Case of 12.gSB-250

SAMPLE RECOVERY ACCESSORIES

WB-5P

PLASTIC WASH BOTTLE500mL Plastic Wash BottlesWB-5p


ACCESSORIES

PFA

Fittings:

T501-8-2 PFA Impinger Cap, Two 1/2” Tube Fittings

T55 PFA Impinger Wrench Set

NTG-10U2 5/8” Glass Filled PFA Union with 1/8” FNPT Tap (for Nozzle Recirculation)

NTG-10F 5/8” Glass-Filled PFA Single Ferrule

NTG-10F-DZ 5/8” Glass-Filled PFA Single Ferrule (Dozen)

4MSEL2N-PFA PFA Male Elbow,1/4” Tube Union to 1/8”

8-4-10ET-T PFA Jump Tee (1/4”, 1/2”, 5/8” Tube Unions) with Nylon Nuts and TFE Ferrules

10-4-8ET-T Alternate PFA Jump Tee (1/4”, 1/2”, 5/8” Tube Union) with Nylon Nuts and TFE Ferrules

4MSC2N-PFA PFA Union, 1/4” Tube Union to 1/8” MNPT

8-4-8ET-PFA Recirculation Run Tee,1/4”, 1/2”, 1/4” PFA Tube Unions,1/4” Tube Union Bore through Recirculation Line

Used in Method 26 for HCI emissions. TFA-25 High Temper-ature PFA clamp nuts are standard. 1/4” tube fittings. TFA-47 Standard with 1/4” tube unions. Also available with 1/4” male pipe fittings or 3/8” tube fittings.

TFA-25

TFA-47

PFA Filter Assemblies:

TFA-25 PFA 25mm Filter Assembly, 1/4” Tube Fittings

TFA-25B 25mm PFA Filter Replace Body Only with 1/4” TU, No Clamp

TFA-47 PFA 47mm Filter Assembly, 1/4” Tube Fittings

TFA-47-6 PFA 47mm Filter Assembly, 3/8” Tube Fittings

TFA-47-6T PFA 47mm Filter Assembly, 3/8” Tube Stubs

Segmented PFA Column & Accessories:T501 PFA Column End Cap, SolidT501-4 PFA Column End Cap with 1/4” Tube Fitting T501-4-2 PFA Column End Cap with two 1/4” Tube FittingsT501-6 PFA Column End Cap with 3/8” Tube FittingT501-6-2 PFA Column End Cap with two 3/8” Tube FittingsT502 PFA Column Connector T504 PFA Column Segment T504-4 PFA Column Segment with 1/4” ube Fitting T504-6 PFA Column Segment with 3/8” Tube Fitting T504-47 PFA Column Segment - Adapts to 47mm Filter HolderT504S PFA Screen, Separator slides into T504T570 PFA Column Segmnet, Solid Bottom

T504-6 Column Segment with Fitting

T504 Column Segment

T501-4 One Port Column End Cap

T501 Column End Cap

T502Column

Connector

T570 Column Segment with Solid Bottom

T501-4-2 Two Port Column End Cap

T504-4

Grooved Vessel

T507G Impinger Single Piece Body, 375ml

PFA L-Stems:

T507-3 L-Stem, 1/2” FEP, Full Length

T507-3R L-Stem, 1/2” FEP, Restricted Tip

T507-5 L-Tube Outlet, 1/2” FEP, Short Ends

PFA U-Stems:

T507-1 U-Stem, 1/2” FEP, Plain Tip

T507-1R U-Stem, 1/2” FEP, Restricted Tip

PFA Straight Stems:

T507-2 Straight Stem, 1/2” FEP, Full Length

T507-2R Straight Stem, 1/2” FEP, Restricted

T507-6 Straight Tube Outlet, Short End

T5072

Hexavalent Chromium PFA Impinger Trains

PFA COLUMN COMPONENTS

Features: • Unbreakable

• Leak Tight without Sealants

• Grooved for Heat Transfer

PFA Column Components are PFA fluorocarbon resin and inert to virtually all chemicals. All are usable for a wide variety of temperature ranges from below 32°F to 500°F (0 to 260°C). The individual components can be assembled for a variety of uses. Components can be purchased separately and assemble according to project specifications.

Vgc-12

Although used primarily as SO2 scrubbers for U.S. EPA Method 16A, determination of total reduced sulfur emissions from stationary sources, the T507g Impinger can be used in other procedures such as Methods 5 and 6 (hexavalent chrome).

PFA Impingers, Stems and Fittings

PFA Impingers and Accessories PFA Filter Assemblies

• Adaptable for Adding Recirculation Fittings

• Quick Connections with Preformed Tube Bends


ACCESSORIES

BALANCES

MODEL DESCRIPTION

BAL-EJ1500 1500g x 0.1 g.

BAL-EJ3000 3100g x 0.1 g.

BAL-EJ6100 6100g x 0.1 g.

BAL-EJ02 USB Interface with Cable

BAL-EJ12 Carrying Case

EJ-SERIES• Easy to read LCD Display with Backlight

• Percentage and Counting

• USB or RS-232 Interface Optional

• Battery Operated (4 x AA not included)

• AC Adapter Included

• Pan Size: 5” x 5.5”

• Check-Weighing Capacity

• 5 Year Warranty

PORTABLE BALANCES

MODEL DESCRIPTION WEIgHT

BAL-W1000ASTM Weight for Electronic Balance. 1 kg. ASTM GRADE 7

BAL-W2000ASTM Weight for Electronic Balance. 2 kg. ASTM SHAPE

BAL-W5000ASTM Weight for Electronic Balance. 5 kg. Class F, Meet Tolerances of NIST (Comes with case)

ELECTRONIC BALANCE - CALIBRATION WEIgHT

comES with cErtificatE of conformancE


ACCESSORIES

BALANCES

MODEL DESCRIPTION PAN SIZE




BAL-HR202i 220g/51g x 0.1mg/0.01mg Semi-Micro with R-232C. 3.6”

HR-SERIES• Percentage and Counting Modes.

• Digital Preset Tare.

• One Touch Printing.

• Last Digital Suppression.

• Standard Underhook.

• Optional Rechargeable Battery Pack.

• GLP/LIMS/ISO Compliant.

• RS-232C Standard.

• 5 Year Warranty.

ANALYTICAL BALANCES

Analytical Balances - Calibration Weight Set

MODEL

BAL-W1-100

DESCRIPTIONWeight Set - 1mg-100gStainless Steel Calibration Weight Set for Lab Use. Set of 9 Weights Plus Fractional Weights in Wooden Storage Box.

Note: Please check with State Department of Weights and Measurements for calibrations.


ACCESSORIES

DESICCATOR AND DESICCANTS Acrylic Desiccator Cabinets feature adjustable shelves with grooves for positioning, removeable lip tray, gasketed door, built-in hygrometer. Cabinets do not include Desiccant, order separately.

31000

www.belart.com

Features• Patented Sealed Construction is Airtight, Dust and Moisture Free.• Portable and Stackable with a Small Footprint.

PORTABLE DESI-VAC CONTAINER Desiccator with a vacuum pump is ideal for drying, preserving, storing, and even shipping samples. Vacuum pump built into the top removes air with manual strokes. Rubber O-ring sealed cover maintains vacuum. Achieves a vacuum of better than 200 inches of water (15 inches of mercury). A release button on top allows air into the container to remove the lid. Sample Humidity Sponges™ desiccant drying packets are included. O-ring-sealed cover maintains vacuum. Achieves a vacuum of better than 200 inches of water (15 inches of mercury A release button on top allows air into the container to remove the lid. Keep powder dry. Plastic container is ideal for storing chemicals, powders, tissues, plant sections, electronics, and weighing samples. Vacuum and desiccants keep mate-rial dry. Supplied with a vacuum indicating button that confirms interior vacuum and a dial hygrometer that displays 0 to 100% relative humidity with a resolution of 2%RH.Dimensions: HxWxD: 11” x 9” x 10”.

DeS-3164DES-3164

• Embedded UV Protection and Superior Chemical Resistance.• Built-in Hygrometer for Quick Check on RH Levels.• Rugged Construction with Sturdy Latches and Lock Provisions.

Model Description Dimensions Features

DES-10000 Desiccator Cabinet 8.4” x 13.4” x 16.3” Gasketed door, built in hygrometer, 0.75 cu.ft.

DES-21000 Desiccator Cabinet 12.4” x 13.4” x 16.3”, Gasketed door, 2 shelves, built in hygrometer 1.17 cu.ft.


12.4” x 13.4” x 16.3” Gasketed door, 2 shelves, built in hygrometer 1.17 cu.ft. 110V


12.4” x 13.4” x 16.3”, Gasketed door, 2 shelves, built in hygrometer 220V fan, 1.17 cu.ft.

DES-31000 Desiccator Cabinet 16.4” x 13.4” x 16.3”, Gasketed door, 3 shelves, built in hygrometer stackable


16.4” x 13.4” x 16.3”, Gasketed door, 3 shelves, built in hygrometer stackable, 110V


16.4” x 13.4” x 16.3”, Gasketed door, 3 shelves, built in hygrometer 220V fan

DES-40000 Desiccator Cabinet 13.4” x 20.4” x 16.3”,

Gasketed door, 2 shelves, horizontal Profile


20.4” x 13.4” x 16.3” Gasketed door, 3 shelves, built in hygrometer


20.4” x 13.4” x 16.3”, Gasketed door, 3 shelves, built in hygrometer, 220V fan


ACCESSORIES

Adsorption Housing, 1/4” FNPT Fittings. Without Sorbent.

SILICA gELBlue Indicating, 12/case, 250 ml per bottle.

Sg-KiTSg-KIT

Apex Instruments Silica Gel is primarily used for drying sample gas prior to measurement and can absorb moisture 40% of its weight. The silica gel can be regenerated by drying in an oven and used over and over again.

SILICA gEL

SILICA gEL3-5mm Bead, Indicating, 2.3Kg.

Sg-3/5B

24005 14005

Part Number Description

14005 DRIERITE®, Nonindicating 10-20 Mesh, 5 Lbs. (2.3 kg)

23005 DRIERITE®, Indicating 8 Mesh, 5 Lbs. (2.3 kg)

24005 DRIERITE®, Indicating 10-20 Mesh, 5 Lbs. (2.3 kg)

26840 DRIERITE®, Cartridge, 50g H2O Capacity

26809 Mounting Clip for Use with Gas Drying Units

Sg-3/5B

The activated alumina is primarily used for air drying at low temperature applications, 5.5 lb. Container.

80% Activated Alumina (White). 1/8” Diameter Beads.

20% Silica Gel (Blue) 3-5 mm Beads.

aluma-sorb

ACTIVATED ALUMINA WITH SILICA gEL

Aluma-sorb

SILICA gEL3-5 mm Bead, Bulk55 LBS, CONTAINER.

Sg-3/5B-55

AH-610R

DRIERITE® DESICCANTSApex Instruments carries both non indicating and indicating DRIERITE®. (anhydrous calcium sulfate) Economical to use, it can be regenerated repeatedly. The indicating DRIERITE® is impregnated with cobalt chloride: blue when dry and changes to pink upon absorption of moisture.

Sg-3/5B-55

ah-610r


ACCESSORIES

Product DescriptionPF-346T32S 2” FNPT, Universal Pipe Flange Reducer, Fits 3”, 4”, 6” Ports, SSPF-346XT32S 2” FNPT, Universal Pipe Flange Reducer with 12” Extension,

Reversible, Fits 3”, 4”, 6” PortsPF-346T32S 2” FNPT, Universal Pipe Flange Reducer, Fits 3”, 4”, 6” Pipe

Flanges, Stainless SteelPF-4/6U32-S Universal Pipe Flange with 2” FNPT, Fits 4” and 6” PortsPF-4/6UB-S Universal Pipe Flange, 4”/ 6” Port, 2.675 Bored Center, SSPF-4/6UCLS Universal Flange, 4”/ 6” w/ 2-1/2” Cam-Lock

UNIVERSAL PIPE FLANgE & FLANgE REDUCERS

CAM-LOCK, FLANgES, PORT ADAPTERS & PACKINg gLANDS

Flange & Cam-Locks

Threaded Pipe Flanges

REDUCING FLANGES

Product DescriptionPF-3/40CLS 3” Bored Pipe Flange, 150 lb pattern, 2.670

Bored Diameter, with size 40Cam-lock Connector, Stainless Steel

PF-3CS 3” Pipe Flange, 150 lb FF Pattern, Bored with Threaded Coupling, Stainless Steel

PF-4BS 4” Bored Pipe Flange, 2.67” RF, 150 lb Pattern, Stainless Steel

PF-6BS 6” Bored Pipe Flange, 150 lb Pattern, 2.670 Bored Diameter, Stainless Steel

PF-4CLS 4” Bored Pipe Flange, 2.67” RF, 150 lb Pattern, Stainless Steel

PF-4CS 4” Bored Pipe Flange, 150 lb FF Pattern with Threaded Coupling, Stainless Steel

PF-4/40CLS 4” Bored Pipe Flange, 150 lb pattern, 2.67 Bored Diameter Welded Cam and Groove Connector (For Probes without Pitot Option, with Tube Outer Sheath) with size 40 Cam-Lock Connections, Stainless Steel

PF-6/40CLS 6” Bored Pipe Flange, 150 lb pattern, 2.67 Bored Diameter welded Cam and Groove Connector (For Probes without Pitot Option, with Tube Outer Sheath) with size 40 Cam-Lock Connections, Stainless Steel

PF-6/48CLS 6” Bored Pipe Flange, 150 lb Pattern, Bored Inside Diameter, with size 48 Cam-lock Connector (For Use with Pitot Version Mercury Probe with Pipe Oversheath),Stainless Steel

PF-6CLS 6” Bored Pipe Flange, 150 lb pattern, 2.670 Bored Diameter, with Cam-lock Connector, Stainless Steel

BORED PIPE FLANgE

Product DescriptionPF-3BLS 3” Pipe Flange, 150 lb RF, Blind, Raised Face, 7-1/2” OD, 6” Bolt

Circle Diameter, Stainless SteelPF-4BLS 4” Pipe Flange, 150 lb Pattern, Blind, Raised Face, 9” OD, 7-1/2”

Bolt Circle Diameter, Stainless SteelPF-6BLS 6” Blind Pipe Flange, 150 lb Pattern, 11” OD, 9-1/2” Bolt Circle

Diameter, Stainless Steel

BLIND PIPE FLANgES

Product DescriptionPF-2T 2” Threaded 304 Flange, 6” OD, 4-3/4” Bolt Circle Dia. Carbon SteelPF-3T 3” Threaded Pipe Flange, 150 lb., Pattern, 7-1/2”

OD, 6” Bolt Circle Diameter, Carbon SteelPF-4T 4” Threaded Pipe Flange, 150 lb., Pattern, 9” OD,

7-1/2” Bolt Circle Diameter, Carbon SteelPF-6T 6” Threaded Pipe Flange, 150 lb., Pattern,

11” OD, 9-1/2” Bolt Circle Diameter, Carbon Steel PF-3TA 3” FNPT Threaded Pipe Flange, 150 lb., Pattern,

7-1/2” OD, 6” Bolt Circle Diameter, Cast AluminumPF-4TS 4” FNPT Threaded Pipe Flange, 150 lb., Pattern,

9” OD, 7-1/2” Bolt Circle Diameter, Stainless SteelPF-6TS 6” FNPT Threaded Pipe Flange, 150 lb., 11” OD,

9-1/2” Bolt Circle Diameter, Stainless Steel PF-3T16 3” Threaded Pipe Flange, 150 lb., Pattern, 7-1/2”

OD, 6” Bolt Circle Diameter, Carbon SteelPF-4T16 4” Threaded Pipe Flange, 150 lb., Pattern, 1” FNPT,

9” OD, 7-1/2” Bolt Circle Diameter, Stainless SteelPF-4PG38S 2” Pipe Flange, 150 lb Pattern, 6” OD, 4-3/4” Bolt Circle Diameter,

with 2” Pipe Packing Gland, Stainless SteelPF-6PG38S 6” Pipe Flange, 150 lb., Pattern, 11” OD, 9-1/2” Bolt Circle Diameter,

with 2” Pipe Packing Gland, Stainless Steel

THREADED PIPE FLANgES

PIPE FLANgE

Product DescriptionPFC-2.5S 2.5” Probe Flange Cap Assembly, Consists of 304 Stainless

Steel Bevel Seat Cap and NutPFC-2S 2” Probe Flange Cap Assembly, Consists of 304 Stainless Steel

Bevel Seat Cap and Nut

PROBE FLANgE CAP

Product DescriptionPF-4PG38S 4” Pipe Flange, 150 lb Pattern with 2” Pipe Packing Gland (For Use

with Probes with Pitot Option, Pipe Outersheath), Stainless Steel PF-346S Flange Plate with 2-3/8” Hole for 2” Pipe. Fits 3”, 4” & 6” Ports, SSPF-46XT32S 2” FNPT Probe Support with Extension


ACCESSORIES

Product DescriptionPF-346PG38 Packing Gland Flange Fits 3”, 4”, 6”,

Includes Packing Gland for 2” Pipe, Stainless Steel

PACKINg gLAND FLANgE

Bored Bushings Reducing Bushings

Product Description64M/32F-CS Reducing Bushing, 4” MNPT-2” FNPT, Carbon Steel48M/32F-CS Reducing Bushing, 3” MNPT-2” FNPT, Carbon Steel32M/16F-B Reducing Bushing, 2” MNPT-1” FNPT, Brass32M/24F-B Reducing Bushing, 2” MNPT-1.5” FNP, Brass

REDUCINg BUSHINgS

Product Description32M/16B-B Bored Bushing, 2” MNPT X 1.035” Bore, Brass32M/24B-B Bored Bushing, 2” MNPT X 1.535” Bore, Brass32M/32B-B Bored Bushing, 2” MNPT X 2.035” Bore, Brass

BORED BUSHINgS

Packing glands

Cam-LockPacking glands

OversheathPacking glands

PF-4/6UCLS

Pg-32/40CL

PF-4/40CLS PF-6/40CLS

Product DescriptionPG-24T 1-1/2 inch Oversheath Packing Gland, Steel Body, 1-1/2

inch MNPT, TFE PackingPG-32S 2” Oversheath Packing Gland, Steel Body, 2” MNPT, PTFE

Ferrule includedPG-32/40CL 2” Oversheath Packing Gland, Steel Body, TFE Packing

(for use with PF-40CLS flange) with size 40 Cam and Groove Connector

PG-38/48CL 3” Oversheath Packing Gland, Stainless Steel body, Cam-Lock, For use with Pitot Version Mercury Probes with Pipe Oversheath

OVERSHEATH PACKINg gLANDS

PACKINg gLAND ACCESSORIES

Product DescriptionPG-32F 2” Adapter, Threaded Bevel Seat, #21-2, Custom Bore,

2.125” ID, Used in PG-32S, Stainless Steel, Note: Does Not Include Nut or Ferrule

PG-32NT 2” Adapter, Bevel Seat, #21-2, Custom Bore, 2.125” ID, Welded to PF-XXX Flange Assembly, Extention, or PC-XXX. Note: Does Not Include Nut or Ferrule

PG-38F 2.5” Custom Threaded Ferrule, Part of PG-38-3Q Packing Gland, Stainless Steel

PG-38RT Thrust Ring, 2.435 ID X 2.875 OD, for PG-38-3Q Packing Gland, Stainless Steel

PG10-4N Pressure Gauge, 0-15 psi, 1/4” NPT, Stainless Steel PG200-4N Pressure Gauge, 1/4” NPT

PACKINg gLANDS FOR PITOTS

Product Description12MTC12-B 3/4” Packing Gland for Pitot with 3/4” Oversheath,

Includes Nylon and Brass Ferrules, Brass12MTC12-S 3/4” Packing Gland for Pitot with 3/4” Oversheath,

Includes Nylon and Ferrules, SS16MTC16N-B 1” Packing Gland for Pitot with 1” Oversheath16MTC16N-S 1” Packing Gland for Pitot with 1” Oversheath,

Includes Stainless Steel Ferrule16MTC16N-SF 1” Packing Gland for Pitot with 1” Oversheath, includes

Nylon Ferrules, Stainless Steel, and 16MTC16-S12F-GR 3/4” Graphite Ferrule, Alternative Packing for 16MTC1616F-GR 1” Graphite Ferrule, Alternative Packing for 16MTC16

360 DEgREE COMPASS ROSE FLANgE

Product DescriptionPF-346T32A360 Flange with 360 Degree (0-90 Degree X 4) Compass

Rose Laser Engraved. 2” Half Coupling Welded. Fits 3”, 4” and 6” Flanges. Includes Arrow Pointer for 2” Oversheath Probe, Stainless Steel

PF-346XT32S360 Flange with 360 Degree (0-90 Degree X 4) Compass Rose Laser Engraved. 2” Half Coupling Welded. Fits 3”, 4” and 6” Flanges. Includes Arrow Pointer for 2” Oversheath Probe. With Bored Bushings and 2” Diameter Probe Support Extension, SS

Product DescriptionPFC-40S-CL 2.5” NPT 316 with Buckles, Cap Cam with Groove

Fitting, Type D, 2.5 inch MNPT, SS

PIPE FLANgE ACCESSORIES

Product Description64RUC32-CS Coupling, Reducer, 4” x 2” FNPT, Carbon Steel48RUC32-CS Coupling, Reducer, 3” x 2” FNPT, Carbon Steel

REDUCINg COUPLINgSReducing Couplings


ACCESSORIES

MEtER CAlIbRAtIOn

CAlIbRAtIOn SERvICESApex performs both calibrations using a wet test meter and bell-prover primary standard. Calibration services are available from Apex Instruments on a fee per console basis. Extra charge for low flow. All console and dry gas meter calibrations are conducted in accordance with U.S. EPA standards. Apex Instruments calibrates source sampler consoles, reference dry gas meters, orifices and pitots.

Calibration being performed with Wet Test Meter

Model Description

DGR-2VER Verification of DGM for Secondary Reference, 2 Point Verification of Previous Calibration

DGMC-5A Pre-Test 5 Point Calibration for Compatible Meter Consoles

DGMC-3A Post Test 3 Point Calibration for Meter Consoles

CAL-ORF Orifice Calibration, 3 Point

DRy GAS MEtER CAlIbRAtIOn SERvICES

MEtER CAlIbRAtIOn EquIpMEnt

DRy GAS SECOnDARy REfEREnCE MEtER (EnGlISh)Dry Gas Meter Secondary Reference Meter (Standard) with 15 pt cal, valve, 5’ hose, 1/2” Quick Connect. Used for calibrating Method 5 Source Sampler Consoles.

DGM-110SR

DGM-110SR

DRy GAS MEtER KG3S W/ REplACEMEnt KIt fOR SK25 DGM In XC-572 Replacement Kit for KG3S to replace SK25 DGM in an existing model XC-572 meter console. Includes KG3S DGM with nuts and o-rings, adapter plate, support bracket, bushings, standoffs and screws.

DGM-KG3SKKITDGM-KG3SKKIt

DRy GAS MEtER KG3S W/ REplACEMEnt KIt fOR Ap25 DGM In XC-572 Replacement Kit for KG3S to replace AP25 DGM in existing model XC-572 meter console. Includes KG3S DGM with nuts and o-rings, adapter plate, bushings, standoffs and screws.

DGM-KG3APKIT

The configuration for the replacing the AP25 does not require the support bracket.

DGM-KG2SRDDGM-KG3SRDGM-KG3-SRD5K


ACCESSORIES

DIAL CALIPERS

Geometric of Type-S Pitot Tube to Method 2.

pT-cal-gWind Tunnel of Type-S Pitot Tube to Method 2.

pT-cal-W

PITOT CALIBRATION SERVICES

THERMOCOUPLE SIMULATOR / CALIBRATOR This Thermocouple Simulator/Calibrator is convenient for checking the accuracy of most Controllers and Temperature Displays. Whe Cold Junction Compensated, is calibrated without External Compensators or Icebaths the Simulator Source is designed for Type-K Thermocou-ples and has 22 precise test points.

m5c-520

Dial Calipers are used for measuring nozzle diameter and inspection of pitots. Dial Caliper, 0-6”/ 150mm Direct inch/Metric Conversion.

m5c-3D...$75.00

NOZZLE CALIBRATION

CALIBRATION EQUIPMENT AND SERVICES

M5C-520

BULL’S EYE LEVELBull’s Eye Level is 1/2” diameter and used for pitot calibrations. Comes with thumb screws for clamping to pitot.

m5c-2

M5C-2

Pendulum Style Inclinometer for the Calibration of Type-S Pitots.

inc-a300

A300 LEVEL INDICATOR

INC-A300

PITOT AUDIT EQUIPMENT & MANOMETERS

Meriam Handheld, LCD DISPDigital Manometer, Hand held, 0-28 inch H2O Selectable Range, English/Metric, with certificate of NIST traceability.

Dhm-m100

HANDHELD MANOMETER

DHM-M100

HANDHELD MANOMETER LCD DISP., Digital Manometer, Method 2, Hand held, 0-10 inch H2O Selectable Range, English/Metric.

Dhm-28-10

DHM-28-10

MANOMETER SOFTWARE Software and cable for Digital Manometer, HM28 series.

Dhm-28-1

MANOMETER DIgITAL DISPLAYDP-CALC Micromanometer makes differential pressure measurements, static, total, and velocity pressures as well as pressure drops across filters, coils, fans, and diffusers. Differential and static pressure from -15 to +15 in. H2O (-3735 to +3735 Pa) lightweight and durable design with an easy-to-read display, certificate of NIST traceability.

Dhm-5825


ACCESSORIES

oriFice FloW meTerS


The OFM-Series Orifice Flow Meters all feature a calibrated, stainless steel critical orifice with two liquid-filled vacuum gauges and stainless steel inline filter. All fittings, including the orifice and filter, are made of stainless steel and include 1/4” tube fitting end connections. These adapters are used with vacuum pumps to provide constant sample flow rates. Orifice sizes range from 4 to 35 providing flow rates from 0.076 Lpm to 6.1 Lpm.


The VUA-Series Low Flow Orifice Adapters feature a calibrated, critical sapphire orifice with liquid filled vacuum gauge, brass fittings and inline filter to adapt to Apex Instruments’ isokinetic source samplers for methods requiring low flow sampling. The adapters are used for VOST and Method 6-type sampling. Adapters include 1/2” male and 1/4” female brass quick connects to attach the isokinetic source sampler to the VOST VU-cords. Three adapters are offered to provide approximately 1/2, 1 and 2 liters per minute flow rates. The VUA-575 is used for Method 7C to provide the required flowrate between 400-500cc/min.

Product Description



VUA-565 Low-flow Adapter for Isokinetic Meter Console, ~0.5 Lpm, 1/2” male-1/4” female quick connect, brass

VUA-575 Low-flow Adapter (M7C) for Isokinetic Meter Console, ~0.5Lpm, 1/2” male-1/2” female quick connect, brass


Product Description

KFR-4A40SNVT Acyrlic, 0.4-5 Lpm, Stainless Steel, No Valve

KFR-4A44SNVT Acyrlic, 4-50 Lpm, Stainless Steel, No Valve



KMR-3A14SVVT Polycarbonate, 0.4-5 Lpm, Stainless Steel, with Valve

KGS-SERIES Glass Tube, Rotating Lens, MM Scales or Direct Read Index

KGR-SERIES Glass Tube, standard lens, MM Scales or Direct Read Index

Apex Instruments offers the precision machined acrylic (KFR-Series), molded polycarbonate (KMR-Series), glass tube(Kg#-Series), and electronic flowmeters for a variety of applications. Available in precision engineered sizes and scales for a variety of fluids. The millimeter reference or direct read scales can be specified to meet any requirements. NIST traceable calibration certificates are available.

FLOW METERS

KFR-Series - KMR-Series - KgS-Series

Product Description

OFM-K4-14 Orifice Control Flowmeter, In-Line, w/2 liquid Filled Vaccum Gauges, Stainless Steel In-Line Filter & KA-14-SS Orifice, 1Lpm

OFM-K4-4 Orifice Control Flowmeter, In-Line, w/2 Vacuum Gauges, Stainless Steel In-Line Filter & K4-4-SS Orifice, .076LPM



OFM-K4-8 Orifice Control Flowmeter, In-Line, w/2 Vacuum Gauges, Stainless Steel In-Line Filter & K4-8-SS Orifice, .34lpm


OFM-K4-HG Calibration Orifice, In-Line, w/ Vacuum Gauge, Stainless Steel In-Line Filter & Orifice, low flow for mercury system

other flow ranges available.


other flow ranges available. caLL for DEtaiLS & PricinG.



ACCESSORIES

REMOTE INCLINOMETER LED DISPLAY (INC-D205)The INC-D205 Remote Inclinometer Display is designed to be used inconjunction with our INC-A2T inclinometer sensor. The display is a highresolution 3 1/2 digit bright LED process meter. The meter is housed in a sturdy compact metal cabinet with convenient carrying handle. RequiresINC-A2T Sensor and Signal Cable (INC-SC-”length”). SC voltage 120/60Hz.Dimensions: 6” x 7” x 8.5”Weight: 4 lb.

INCLINOMETERSThe INC-A2T-50 Inclinometer Sensor is designed for measuring the yaw angle of flow in accordance with Method F&G. The standard collar is designed for clamping onto 2” tubing. Remote Inclinometer Sensor, 360 degrees with 2” Tube Clamp and Amphenol Connector has analog voltage output. Alternative clamp sizes are available upon request. This remote sensor is designed to be used with the 3-D flow console, however it can be used with the Remote Digital Display (INC-D205). The inclinometer sensor is connected to the display via our standard 4-pin Signal Cable.

PROTRACTOR / INCLINOMETERThe M5C-4 Protractor/Inclinometer is an ideal tool for measuring cyclonic yaw angles in accordance with Method 2. The machined aluminum frame and integral baseplate provide a light, rigid and ultra precise platform allowing the state-of-the-art sensor to provide unsurpassed accuracy throughout the 360° range. The inclinometer can be securely attached to probe with one of the following mounting brackets.

m5c-4

INC-A2T-50INC-D205

Bracket for M5C-4 with 1” Aluminum Clamp.m5c-4-16

Bracket for M5C-4 with 2” Aluminum Clamp.m5c-4-32

Mounting Brackets for M5C-4

M5C-4PENDULUM STYLE INCLINOMETEREasy-to-use, hand-held Pendulum Style Inclinometer. 1/10deg accuracy:Includes plastic case.. The dial is 2.6”dia. with vernier divisions of 1/10deg. Height is 3.6”, width is 3.1”, wt :3.6oz.

inc-a300

Features:• Reliable: 15 years of proven DryCal® performance• Accurate: Backed by ISO 17025; NV LAP accredited• Portable: Lightweight and impact-resistant• Simple: Quick Start operation and no messy soap solutions• Streamlined: Bios optimizer software transfers calibration data directly to any windows based PC using built in serial port.

FLOW CALIBRATOR/PISTON PROVER / BIOS Defender 510 and 520 Series are the next generation of DryCal® technology. It is the proven and reliable foundation of all BIOS primary standards, and the basis of our ISO 17025 accreditation by NVLAP of NIST. Available in low, median or high ranges.

Model Description




200-520H Flow Calibrator, Defender 200-510H, High Flow Range, 300ml-30,000ml/min, +/-1% of Reading Volumetric, Includes Temperature and Pressure Recordings

200-520L Flow Calibrator, Defender 200-510H, Low Flow Range, 5ml-500ml/min, +/-1% of Reading Volumetric, Includes Temperature and Pressure Recordings

200-520M Flow Calibrator, Defender 200-510H, Medium Flow Range, 50ml-500ml/min, +/-1% of Reading Volumetric, Includes Temperature and Pressure Recordings

INC-A300

BIOS DEFENDER 510 AND 520 SERIES


inc-D205inc-a2T-50


ACCESSORIES

Product Description

TPFA-o/ o PFA (Perfluoralkoxy) combines the attributes of PTFE and FEP. The working temperature is 500ºF (260ºC). Color is Clear with a light blue tint. Highest resistance to chemical; pharmeceutical grade; less likely to kink.

PTFE-o/ o PTFE (Tetrafluoroethylne) possess the lowest coef-ficient of friction of any known solid and is used widely because of its anti-stick properties which allows easy cleaning. PTFE has chemical resistant qualities and is unaffected. Working temperature is 500ºF (260ºC), Color is milky white.

PTFE TubingPTFE Resin is supplied in powdered form, which is extruded into a paste and then finally tubing. It is translucent white in color. The minimum and maximum temperature ranges are <-170°C to 260°C (-275°F to 500°F). Tensile strength is 3200 psi.

TPFA-10/8 Tubing, PFA, 1/2” ID x 5/8” OD x .062 wall

TPFA-4-047 Tubing, PFA, 5/32” ID x 1/4” OD x .047 wall




TUBINg

PFA Tubing with Stainless Steel OverbraidTubing constructed of an extruded innercore of Virgin PFA with a 304 stainless steel braid reinforcement. The innercore is non-aging and has a long flex-life, it is weather resistant and the nonstick surface makes cleaning an ease. The braid acts as both a carrier of pressure and a protective covering. Requires Tube Stub Crimps (6TS6C-S) for each end (per foot).

TTO- o - o (Nominal)

TTO-4 PTFE Tubing with Stainless Steel Overbraid, nom.1/4” Requires Tube Stub Crimps (4TS4C-S) Each End, Per Ft.

4TS4C-S Tube Stub Crimp,1/4” One Used on Each End of Stainless Steel Overbraided, PTFE Tubing

TTO-6 PTFE Tubing with SS Overbraid, nom. 3/8” Requires Tube Stub Crimps (6TS6C-S) Each End, Per Ft.

6TS6C-S Tube Stub Crimp, 3/8” One Used on Each End of Stainless Steel Overbraided, PTFE Tubing

TTG-10/6 PTFE Probe Liner Material, 5/8” OD, 3/8” ID, Price Per Ft.

Product Description

TT-2/1 1/8” OD, 1/16” ID, Natural PTFE Heavy Wall Tubing

TT-4/2 1/4” OD, 1/8” ID Natural PTFE Heavy Wall Tubing




PFA TubingPFA Resin is translucent white in color.

fEP tubing fEP tubing is available.

Stainless Steel TubingUsed for precise flow and miniature applications. It is hard tempered for excellent machinability and has high tensil strength. Temperature range is -250°C to 315°C (-425°F to 600°F). Call for pricing.

Apex Instruments Inconel Tubing is made from a nickel-chromium alloy with excellent oxidation resistance against cracking or breaking at higher temperatures. Our Inconel tubing is corrosion resistant to stress caused by caustic substances and is often used for thermocouple protection tubing. The temperature range is -132°C to 650°C (-205°F to 1200°F). Be sure to use with compression fittings. Call for pricing.

Inconel Tubing

Polyurethane TubingPolyurethane Tubing offers an excellent resistance to kinking, abrasion, hydrolysis, oxidation and ozone. It also offers high resilience, good energy absorption and good at over all chemical resistance. It is excellent in applica-tions requiring superior toughness and resistance to tear, abrasion, fungus and humidity.

TU-o / o -o (Tube OD) / o (Tube ID)

TU-4/2 Polyurethane, 1/4” OD, 17” ID (Per Foot)

TU-6/4 Polyurethane, 3/8” OD, 1/4” ID (Per Foot)

Extruded from linear low density Polyethylene Resin, this tubing is tough and flexible. It is chemical and moisture resistant and has a wide range of uses in industrial and agricultural applications.

Polyethylene Tubing

TP-o / o o -o (Tube OD ) /o (Tube ID) o(Color; BK= Black, BL=Blue, NA=Natural, OR=Orange, YW=Yellow)

TP-4/2BK Polyethylene, 1/4” OD, Black (Per Foot)

TP-4/2NA Polyethylene, 1/4” OD, Natural (Per Foot)

TP-4/2OR Polyethylene, 1/4” OD, Orange (Per Foot)

TP-4/2YW Polyethylene,1/4” OD, Yellow (Per Foot)

TP-6/4BK Polyethylene, OD, Black (Per Foot)

TP-6/4NA Polyehtylene, 3/8” OD, Natural (Per Foot)

(Per foot)

(Per Foot)

(Per Foot)

(Per Foot)

(Per Foot)

(Per Foot)


ACCESSORIES

VINYL (PVC) TUBINgPlasticized from nontoxic Flexible Vinyl PVC, this tubing offers a wide range of chemical resistance which makes it an ideal choice for a variety of industrial piping problems involving the handling of corrosive, pure or sensitive solutions.

Heat Shrinkable Tubing. Call for Details.

Durable overbraiding for extra protection against abrasion, mildew and aging for cable assemblies. This tubing is de-signed with an open-weave braided type construction, it offers flexibility and freedom of movement to the sleeving and wiring it covers. This open-weave construction allows complete drainage to prevent any moisture and condensation to cause any permanent damage to the inner wire it covers. Normal operating temperature range is -70°C to 125°C (-94°F to 257°F).

BRAIDED SLEEVINg

Please call and inquire on Apex Instruments extensive line of tubing.

TV- o/ o o

- o (Tube OD) / o (Tube ID) o (Color; R=red, Y=yellow)

TV-4/2 Vinyl, 1/4” OD, 18” ID, (Per Foot)

TV-5/3 Vinyl, 5/16” OD, 3/16” ID, Clear (Per Foot)

TV-5/3R Vinyl, 5/16” OD, 3/16” ID, Red (Per Foot)

TV-5/3Y Vinyl, 5/16” OD, 3/16” D, Yellow (Per Foot)

EXP- o - o (Diameter)

EXP-2 EXPANDO,1/8” Diameter Relaxed, Black

EXP-8 EXPANDO, 1/2” Diameter Relaxed, Black

EXP-12 EXPANDO, 3/4” Diameter Relaxed, Black

EXP-20 EXPANDO, 1.25” Diameter Relaxed, Black

EXP-30 EXPANDO, 2” Diameter Relaxed, Black

EXP-30HD EXPANDO, 2” Diameter Relaxed, Heavy Duty, Black

DgM-AP25DgM-110

DgM-175DgM-S275

DRY gAS METERS

Product Description

DGM-AP25 AP25 Metric Dry Gas Meter, used in MC-572 and MC-623

DGM-110 110 Rockwell Dry Gas Meter with 1/2” FNPT Side Ports, used in MC-522

DGM-175 175 Rockwell Dry Gas Meter with Top Mount Spud Connectors

DGM-S275 S-275 Gas Meter with 3/4” FNPT Side Port

DTM-P4B Dry Gas Meter Bushing, for use on old UL and new AP25 DGM’s only

DTM-P6B Dry Gas Meter Bushing, for use on old UL and new AP25 DGM's only

Special Purpose HoseThe Apex Instrumens Air hose is constructed of a PVC/Poly-urethane alloy, this hose has a high tensile strength yarn. The core tube has an excellent cut resistance. It also has a highly abrasion-resistant alloy jacket and has good flexibility over a wide temperature range of -20°C to 85°C (0°F to 185°F).

POLYSPRINg HOSEApex Instruments Polyspring hose is constructed of a clear PVC which allows the visual confirmation of product flow. The hose is resistant to chemicals and has a spiral wire reinforcement to prevent kinking or collapsing. The hose diameter will not expand under normal rated working pressures. It’s temperature range is -4°C to 65°C (25°F to 150°F). Used on our U-cords.

AIR HOSE

H- oSP - o (Diameter)

H4SP PVC/Polyurethane Alloy Air Hose,1/4” ID, Special Purpose, Blue (Per Foot)

H6SP PVC/Polyurethane Alloy Air Hose, 3/8”ID, Special Purpose, Blue (Per Foot)

H-oSPS - o (Diameter)

H-10SPS PVC, Clear, Reinforced with Helically-Wound Spring Steel Wire, 3/8” ID (Per Foot)

TUBINg

MPT-�-� MPT - � (TUBE OD) -� (LENgTH in MM)

MPT-6-133 Used for Oversheath Probes

MPT-6-181 Used for Method 5 Probes

MPT-6-218 Used for SFA-47

MPT-6-283 Used for PM10 and SFA-47

MPT-6-320 Used for SFA-190, SFA-300 and SFA-2590

MPT-6-421 Used for PM10-2.5 and SFA-47

The unique design of the Apex Modular Pitot Tip reduces amount of water droplets collected in the pitot lines. The lower tube is self-draining while the offset in the upper tube acts as a water trap. The water can be easily cleared tilting tip down or back. Replacement tips for standard Method 5 probes are MPT-6-181, and MPT-6-133 for probes with optional over-sheath. Longer tips are available for in-stack filtration. See Flow, Pressure and Temperature Section of this catalogue for additional pitots plus pipe flanges and inclinometers.

REPLACEMENT PITOT TIPS

STAINLESS STEEL, 3/8” TUBINg

length in mm

Standard M5 Probe: PA-��-�

(Per Foot)


ACCESSORIES

AM3101A-K

AM-MCPAM3108S

AM3057

AM3106B-K

AM-SBP

AM3057

AM3102P

Displays- Thermocouple and Process:

TC-765-KF Temperature Display, LED, 120/240V, 1/8 DIN

205-EV-4RCO Process Meter Display, 5V, with Excitation Output, 3/36” DIN

205-PV-3RCO Process Meter Display, 5V, 3/64” DIN

Electrical Cordsets, Plugs and Jacks:

M-IEC-14AWG Power Cordset with 5-15P plug and IEC connector, 14 AWG

L5-15 NEMA 5-15 Plug, 15A/125V, 2-Pole, 3-Wire Grounding

L5-30 NEMA 5-30 Plug, 30A/125V, 2-Pole, 3 Wire Grounding

L6-20 NEMA 6-20 Plug, 20A/250V, 2-Pole, 3-Wire Grounding,

M-SCKT15A IEC Power Inlet, Screw Mount, 1/4” tabs, EAC-311, 15A/240V

M-49BK Snap-in Receptacle, NEMA 5-15R, Standard NA Type, 3-Pole, 1/4” Tabs, 15A/125V

Fans:

AM-CF110 Cooling Fan Axial, 120 Volt, 4.7” Square Axial

AM-CF220 Cooling Fan Axial, 240 Volt, 4.7” Square Axial

Switches:

M-31302A 7 Channel Thermocouple Switch

M-31302K 7 Channel Switch Knob

M-RA911 Rocker Switch (Curvette), SPST

M-4X846 Toggle Switch (On/Off), SPST

Heaters:

AM-SB500W Heater Element for Sample Box, 120V, 500 watts

AM-SB500W-220 Heater Element for Sample Box, 240V, 500 watts

AM-SB772W Heater Element for Sample Box, 120V, 772 watts

Pressure Transducers:

LPM1010-6B5 Druck Transducer, LPM1010 Series, 2in H20, 5 +/- 5 VDC Output, +/- .25% Accuracy, Terminal Strip

LPM1010-2B5 Druck Transducer, LPM1010 Series, 6in H20, 5 +/- 5 VDC Output, +/- .25% Accuracy, Terminal Strip

Solenoids:

M-U8356-120V ASCO 3-Way Solenoid, Brass, 120V

M-U835B-220V ASCO 3-Way Solenoid, Brass, 220V

Solid State Relays:

SSR-330-25 Solid State Relay, 25 AMP, 110/240V

SSR-330-40 Solid State Relay, 45 AMP, 110/240V

Video Inspection:

W7800 Monitor, leather case, power supply, P&T camera, star holder, 20m/65’ cable

Thermal Circuit Breakers:

M-CB15A Circuit Breaker, 15 AMP, 120/240 Volt




Magnetic Circuit Breakers:

M-CBR15A-M Circuit Breaker, Magnetic, Rocker Switch, 15 Amp. Horizontal Mount., 120/240 Volt




Electrical/Electronic Parts

Replacement Manometers & Parts:

M-42210 Dual Column Panel Mount Manometer, 0-10” H2O

M-42210-M Dual Column Panel Mount Manometer, 0-250mm, Metric

M-422DS Manometer Displacer with Knob

A-316 Manometer Bushing,1/8” FNPT, NY

DWA101R Red Manometer Oil

QC-MAN-F3 Manometer Quick Connect Fitting, 1/8” FNPT, Chrome plated Brass with Valve and Viton® O-ring

QC-MAN-M2 Manometer Quick Connect Fitting,1/4” MHB

PMC30 Manometer Quick Connect Plug

4T827 Retaining Cord, Quick Connect Plug Temperature Controllers:M-1400 Analog , 1/16” DIN, Type KM-PXR3-C Fuji Controller, 1/32” DIN, Degree Celsius

Circular Connectors (Amphenol) 4-pin

AM-SBP Filter Box Amphenol Wired Sub-Assembly

AM-MCP Replacement Meter Console Wired Amphenol Sub-Assembly

AM3101A-K Replacement Amphenol Connector for Apex U-cords, Male, 14S-2 Series, 4 Pin with external male threads, Teflon tubing, heat shrink

AM3106B-K Replacement Amphenol Connector for Apex U-cords, Female, 14S-2 Series, 4 Socket with swivel ring, Teflon tubing, heat shrink

AM3102P Replacement Amphenol Connector for Filter Box, Panel Mount

AM3057 Replacement Strain Relief for Amphenol

M-1400

PMC30 with 4T827

DWA101-RManometer Oil


ACCESSORIES

Tube To Male Pipe

Male Connectors

2MSC2N-S 1/8TU-1/8MNPT4MSC2N-S 1/4TU-1/8MNPT4MSC4N-S 1/4TU-1/4MNPT4MSC6N-S 1/4TU-3/8MNPT6MSC6N-S 3/8TU-3/8MNPT8MSC6N-S 1/2TU-3/8MNPT 10MSC6N-S 5/8TU-3/8MNPT 10MSC8N-S 5/8TU-1/2MNPT

Male Elbow

4MSEL2N-S 1/4TU-1/8MNPT 4MSEL4N-S 1/4TU-1/4MNPT 4MSEL6N-S 1/4TU-3/8MNPT 6MSEL4N-S 3/8TU-1/4MNPT 6MSEL6N-S 3/8TU-3/8MNPT 6MSEL8N-S 3/8TU-1/2MNPT 10MSEL6N-S 3/8TU-3/8MNPT10MSEL8N-S 3/8TU-1/2MNPT

Thermocouple Connectors

8MTC8-S 1/2TU-1/2MNPT 16MTC16N-S 1.0TU-1.0MNPT

Male Branch Tee

4MBT4N-S 1/4TU-1/4MNPT 6MBT4N-S 3/8TU-1/4MNPT

Male Run Tee

4MRT4N-S 1/4TU-1/4MNPT 6MRT4N-S 3/8TU-1/4MNPT

Tube to Tube Unions

2SC2-S 1/8” Tube Union 4SC4-S 1/4” Tube Union 6SC6-S 3/8” Tube Union 8SC8-S 1/2” Tube Union N-10UB 5/8” Tube Union

4RU2-S 1/4TU-1/8TU 6RU4-S 3/8TU-1/4TU 8RU6-S 1/2TU-3/8TU

4EE4-S 1/4TU-1/4TU6EE6-S 3/8TU-3/8TU 8EE8-S 1/2TU-1/2TU

4ET4-S 1/4TU 6ET6-S 3/8TU

Jump Tee

6-6-4ET-S 3/8x1/4x3/8 Jump 8-4-6ET-S 1/2x1/4x3/8 Jump

Tube to Female Pipe

Female Elbow

4FEL2N-S 1/4TU-1/8FNPT

Female Run Tee

4FRT2N-S 1/4TU-1/8FNPT6FRT4N-S 3/8TU-1/4FNPT

Order Sizesin OrderShown inDiagram

1 2

3

Port Connectors

Tube End Reducer

4TUR6-S 1/4TU-3/8TU, 6TUR4-S 3/8TU-1/4TU, 8TUR10-S 5/8TU-1/2TU, 8TUR4-S 1/2TU-1/4TU, 8TUR6-S 1/2TU-3/8TU, 10TUR6-S 5/8TU-3/8TU,

Tube End Bulkhead Adapter

4TUBC4-S 1/4TU-1/4STUB 8TUBC8-S 1/2TU-1/2STUB

Port Connector

4PC4-S 1/4” 4PC6-S 1/4-3/8 6PC6-S 3/8” 6PC8-S 1/2-3/8

Tube End Male Adapter

6MA2N-S 3/8MT-1/8MNPT 6MA4N-S 3/8MT-1/4MNPT

1 2

STAINLESS STEEL FITTINgS

4NU-S 1/4” Tube Nut 6NU-S 3/8” Tube Nut 8NU-S 1/2” Tube Nut N-10 5/8” Tube Nut 12NU-S 3/4” Tube Nut

4BLEN4-S 1/4 Cap6BLEN6-S 3/8 Cap8BLEN8-S 1/2 Cap 10BLEN10-S 5/8 Cap

Cap Tube Nut

Other

Union Tee Union Elbow

Union Reducing Union


ACCESSORIES

QUICK CONNECTS

CABINET LATCHCabinet Latch, Spring.m-hc8l

CABINET KEEPERSLatch Keeper, Long Shank for Hot Box Door.m-hS14lS

HARDWARE

CABINET KEEPERSLatch Keeper, Short Shank for Source Sam-pling Console Door.m-hS83K

SPRINg HANDLEStainless Steel Internal Spring Handle for Source Sampler Console, 3 Hole.h50032

PANEL LATCHPanel Latch, Slotted.l-43144

RUBBER FOOTRecessed Rubber Foot.9540K59

SAFETY BAILSafety Bail for Monorail Attachment.SB-2pin

RAIL HANgERRail Hanger for Source Sampler Console (Price per Pair).mc-rh

FEMALE TUBE END

QC-F4-SS Female TE, 1/4 IN - 1/4 TUQC-F6-SS Female TE, 3/8 IN - 3/8 TUQC-F8-SS Female TE, 1/2 IN - 1/2 TU

FEMALE BULKHEAD

QC-BHF4-SS Female BH, 1/4 IN - 1/4 TUQC-BHF6-SS Female BH, 3/8 IN - 3/8 TUQC-BHF8-SS Female BH, 1/2 IN - 1/2 TU

MALE TUBE END

QC-M4-SS Male TE, 1/4 IN - 1/4 TUQC-M6-SS Male TE, 3/8 IN - 3/8 TUQC-M8-SS Male TE, 1/2 IN - 1/2 TU

MALE BULKHEADQC-BHM4-SS Male BH, 1/4 IN - 1/4 TUQC-BHM6-SS Male BH, 3/8 IN - 3/8 TUQC-BHM8-SS Male BH, 1/2 IN - 1/2 TU

M-422DSA-316

MANOMETER QC FITTINgManometer Quick Connect Fitting, 1/8 FNPT, Chrome plated Brass with Valve & Viton® O-Ring.Qc-man-F3

MANOMETER QC FITTINgManometer Quick Connect Fitting, 1/4 MHB.Qc-man-F2

Apex Instruments offers many types of Stainless Steel Quick Connects. Brass is available for some types, please call for details.

All stoppers are rubber sleeve standard.

GS-13 13mm, 10/pk.GS-20 20mm, 10pkGS-30 30mm, 10/pk.GS-MIX Kit Includes: 10pk. each size

gS-13

gS-20 gS-30

Stoppers

GA-GL-18/10T #18 Silicone Seal Ring, with PTFE 9 mm to 11 mm

Seal ring


ACCESSORIES

ADI-19319TTM ADI Single Heated Head Diaphragm-Vac Pump, SS Wetted Parts, 75W Heater Cart., Type K Thermocouple, 120/240V

GP-DAA-V142 Gast Model DAA Double Diaphragm Replacement Pump (100/120V-50/60Hz)

GP-DAA-V140 Gast Model DAA Double Diaphragm Replacement Pump (200/240V-50/60Hz)

GP-DAA-RBK Rebuild Kit for Gast Model DAA Double Diaphragm Pump

GP-15D1 Gast Model Mini Diaphragm Pump, 6.4 lpm open, 120VAC

GP-15D1-V Gast Model Mini Diaphragm Pump, 6.4 lpm open, 120VAC, 240V

GP-MAA Gast Model Double Diaphragm, MAA Series, Oiless, 120V

GP-MAA-V Gast Model Double Diaphragm, MAA Series, Oiless, 240V

AA404 Muffler Jar Seal, Replacement for Seal in Muffler Assembly (AB609B)

AB609B Muffler Assembly with 1/4 inch FNPT, for Vane Pump Assembly (GP-0523)

AJ-0523 Aluminum Muffler Jar, Replacement for Jar in Muffler Assembly (AB609B)

AJF-0523 Muffler Filter Insert, Replacement for Filter in Muffler Assembly (AB609B)

AK731 Gast Replacement Vanes for Pump Model GP-0523 (4 Required per Pump)

GP-BL50-2 Miniature Lubricator Assembly with 1/4 inch FNPT, for Vane Pump Assembly (E-0523)

GP-BL50-R Lubricator Rebuild Kit, Includes Wick, Nut, Grommet & Seal, for GP-BL50-2 Lubricator

GP10W-250 Gast Vane Pump Oil, 10W, 250mL

O-026N Lubricator O-Ring for BL-50-2. 0.026” Diameter

PUMPS & ACCESSORIES

Peristaltic Pumps are useful in a variety of applications. The material to be pumped only comes in contact with the tubing. This is ideal for applications where the product to be moved or pumped should not touch any foreign materials. Also, peristaltic pumps are precision flow rate devices with each revolution of the roller assembly delivering a precise amount of gas. Finally, peristaltic pumps are self-priming and can handle a wide variety of viscosities, from air to gases to heavy slurries. Economically priced fixed-flow peristaltic pumps are available for a wide range of flows. The single head pump PP907-049 comes with a tube kit consisting of four different pump tubes for adjusting the flow from 0.21 to 3.5 ccm per revolution. Different motor speeds are available from 2 to 203 rpm. The pump head and enclosure are made of polypropylene. Dual head model also available PP927-049 which is pre-set for 98 ccm per head.

DIAPHRAgM PUMPS

PERISTALTIC PUMPS

Single-Speed, Single-HeadPeristaltic Pump, 49 rev/min,with Tube Kit.pp907-049

Single-Speed, Single-Head Peristaltic Pump, 49 rev/min, with Tube Kit.pp927-049

LUBRICATED ROTARY VANE PUMPGast Model 0523 Lubricated Vane Replacement Pump (100/240V-50Hz/60Hz). gp-0523...$478.00

REPLACEMENT PARTS FOR ROTARY VANE PUMP

gASTGast Model Mini Diaphragm Pump, 6.4 lpm open, 120VAC.gp-15D1

240VACgp-15D1-V

KNFDiaphragm Vacuum Pump, KNF Model UN815KN, free flow 15 lpm, Ryton Head, EPDM Diaphragm and valves, 120VAC/50 Hz.gp-un815Kn

DIAPHRAgM PUMPS

Single, Dual and Triple Head Peristaltic Pump Assembly (150 volt, 6 RPMs with Cooling Fan).pp-7015a-epp-7015a-e2pp-7015a-e3


ACCESSORIES

Antiseize, 1/4 oz. Tube, -65°F to 2600°F

EQUIPMENT CASES

ATA Transport Cases protect your equipment and glassware from shipping damage. Each case is made of sturdy 3/8” ABS laminated plywood with reinforced edges and corners. A built-in foam liner provides added protection. Call for details on custom cases.

ATA Transport Cases

Part # DimensionsTC-0523 Console Transport Case - Pump UnitTC-0523C Console Transport Case Enclosure - Pump UnitTC-522 Console Transport Case - MC-500 Series Source Sampler ConsolesTC-522U Console Transport Case - MC 500 Series Source Sampler

Consoles with Extra StorageTC-600 Console Transport Case - MC-170 & MC-623 Source

Sampler ConsolesTC-7A9 Method 7 Kit Transport CaseTC-GW2.5 Glassware Transport Case (holds 2-1/2 sets of Method 5 Glassware)TC-GW20I ATA Glassware Transport Case (holds 20 impingers)TC-PITOT Blow Molded Case with Convoluted foam, locking metal latchesTC-SB13 Sample Case Transport Case (Holds One SB-2 & Two SB-3 Units)TC-VSB VersaCase Transport Case (Holds any VersaCase2 Kit Method)TC-X0523 XC Pump Unit Transport CaseTC-XC5 XC-500 Series Pump Unit Transport Case

Apex Instruments now offers multiple black plastic, stackable SKB RotoRack cases to protect your equipment from damage. Constructed of a molded polyethylene shell which includes front and rear covers and gasket seals to protect the contents from moisture and dirt. This case offers recessed heavy duty twist latches, molded in handles and shock absorbing rubber feet. (optional rear rails available for added stability). Call for pricing.

SKB Cases

Part # DimensionsXC-5U Black RotoRack Case - Shallow 19”; 5

Unit, Inside HxWxD: 19” x 8” x 8.75”,Black Polyethylene

XC-6U Black RotoRack Case 19” Rotomolded Rack Case, 6U, Black Polyethylene

XC-8U Black RotoRack Case - HxWxD: 18” x 22” x 20”; 21 lbs.

XC-10U Black RotoRack Case - Shallow 19”; 10 Unit, Inside HxWxD: 19” x 17-1/2” x 8”, UHMW black polyethylene.

XC-10UD Black RotoRack Case - HxWxD: Outside 20.5” x 23.75” x 22”; 20.46 lbs.

XC-16US Black Shock Mount Rack Case - HxWxD: 36.25” x 29.25” x 27.25”; 84 lbs.

SKB-1916 Rotomolded Castorboard, w/3-inch locking wheels for 16U Rack Case Transport.

TC-0523

TC-gW2.5

TC-X0523

SUPPLIES

TFE HIgH DENSITY TAPETFE Tape, High Density, 1/2” X 520” per roll.T-TFe8-520

TFE Tape, High Density, 1” X 520” per roll.T-TFe16-520

TFE Tape, High Density, 2” X 520” per roll.T-TFe32-520

ANTI-SEIZE PREMIUM gRADE NICKEL BASED,Anti-seize, 1/4 oz. Tube, -65°F to 2600°F.aZni-4

3M gLASS ELECTRICAL TAPE3M Glass Electrical Tape, 69, 3/4” x 108’ per roll.3m-108

XC-8U Transport Case XC-10UD Molded Rack Case

XC-16US Molded Rack Case


ACCESSORIES

MONORAILS

MONORAIL HARDWARE

(Threaded pipe flanges are available in 3”, 4” or 6”, stainless steel or aluminum.) Note: The chain must be attached to the stack so that the chain angle to the monorail is no less than 30° (45° is recommended).

PF- CSPipe Flange

PART # Monorail with Cable and Chain LF


10


12

P1001-14 MONORAIL, 14FT, STEEL Heavy Duty, Double Channel, w/ Adjustment Chain, L-Bracket & Hardware.

14


16


17

P1001-18 MONORAIL, 18FT, STEEL W/CHAIN Heavy Duty, DoubleChannel, w/Cable, Adjustable Strap, L-Bracket & Hardware.

18

PART # Flange

PF-3CS Flange, 3” 150 lb. FF, 2.67 Bored, Stainless Steel, with Threaded Coupling.

PF-4CS Flange, 4” 150 lb. FF, 2.67 Threaded, Stainless Steel, with Threaded Coupling.

PF-6CLS Flange, 6” 150 lb. FF, 2.67 Bored, Stainless Steel with Cam-lock Connector.

See Accessories Section for Different Configurations.


P2751 MONORAIL, TROLLEY Swivel Frame Trolley with Eyebolt, 1 Foot Chain and Snap-hook.

P501 MONOMOUNT, MONORAIL SUPPORT Support Bracket; Fits 3”, 4”, 6” & 8”, Standard Pipe Flanges, Includes P1354 Hinge, (4) P3010 Nuts and P371 Bolts.

Link to Flanges

LF 6 7 8 9 10 12

Part # P1000-6 P1000-7 P1000-8 P1000-9 P1000-10 P1000-12

Probe Size







monorail with chainHeavy Duty Steel Monorail with Chain, L-Bracket and Hardware (for use with probes).


ACCESSORIES

PART # Flange

PF-3CS Flange, 3” 150 lbs. FF, 2.67 Bored, Stainless Steel

PF-4CS Flange, 4” 150 lbs. FF, 2.67 Threaded, Stainless Steel

PF-6CLS Flange, 6” 150 lbs. FF, 2.67 Bored, Stainless Steel with Cam-lock Connector


P2751 Monorail, Trolley Swivel Frame Trolley with Eyebolt, 1 Foot Chain and Quick Link

P501 Monomount Monorail Support Bracket; Fits 3, 4, 6 & 8”, Standard Pipe Flanges, Includes Hinge, Nuts, and Bolts

Training Manuals

MANUALS AND REFERENCE MATERIALApex Instruments offers a complete line of Title 40 of the Code of Federal Regulations that pertain to Protection of the Environ-ment. Title 40 is composed of twenty-eight volumes of which Air Programs comprises approximately sixteen. The most popular for our customers are Part 60 (60.1-end) Standards of Performance for New Stationary Sources and Part 60 (Appendices) that include only the US EPA Source Testing Methods. Please call or check our Price List for detailed listing of all Title 40 volumes.

Training Manuals

Code of Federal Regulations

Part # Description

40CFR-SET Set, CFR 40, AIR/RCRA PROGRAMS, 19/Set (1 ea. listed below)

40CFR1-49 CFR 40, Parts 1-49 (Air Programs)


40CFR52A CFR 40, Parts 52.01-52.1018 (Air Programs)

40CFR52B CFR 40, Parts 52.1019-52 END (Air Programs)


40CFR60 CFR 40, Parts 60.1-END (Air Programs)

40CFR60APPX CFR 40, Part 60 APPENDIX (Air Programs)


40CFR63A CFR 40, Parts 63.1-63.599 (Air Programs)

40CFR63B CFR 40, Parts 63.600-63.1199 (Air Programs)

40CFR63C CFR 40, Parts 63.1200-END (Air Programs)




40CFR86A CFR 40, Parts 86.1-86.599-99 (Air Programs)

40CFR86B CFR 40, Parts 86.600-END (Air Programs)

40CFR190-259 CFR 40, Parts 190-259 (RCRA)



Product Manuals

MONORAILS


ACCESSORIES

Data Reduction Software

Product Description

PM-2.5-10C Particle Sizing Software for PM2.5 and PM10 Cyclones

ISOCYCLONE1.0 PM10/2.5 IsoCyclone Data Collection and Reduction Spreadsheet (MS Excel Workbook)

ISOCALC2.2 Isocalc Data Collection and Reduction Spreadsheet (MS Excel Workbook). Method 1-5

PARTICLE SIZINg DATA REDUCTION SOFTWARE

Functions• Calculates each stage’s aerodynamic cut point and DP250, needed to reduce particle size data. • Calculates and Stores ancillary data, such as dry gas composition and moisture content. • Reduces velocity traverse data. • Aids in selection of sample flow rates and ideal nozzle size. • Calculates flow rates and dwell times required for PM10 and PM2.5 sampling traverses. • Calculates fractional efficiencies of control devices from samples obtained at inlets and outlets.

WinciDrS

Windows-based Cascade Impactor Data Reduction System (WINCIDRS) calculates particle size distribution of stack particulate matter (PM) taken with the Cascade Impactor, as well as particle-sizing cyclones. Developed by stack particle analysis experts, this software reduces the time and chances of error involved with reducing particle sizing data. The PM10/2.5 Software Program (PM-2.5-10C) is extracted from WinCIDRS and simplified for use only with PM10 and PM2.5 cyclones. The calculations are similar to the WinCIDRS, scaled-down specifically for cyclone data reduction. The calculations are still intensive enough to demand computer software.

Isokinetic Slide RuleThis device performs Isokinetic Stack Sampling Calculations. The slide rule provides new ∆H settings at a glance.

m5a-1.......english units

m5a-1m....metric units

ISOKINETIC CALCULATORS & SPREADSHEET

Programs included: • Traverse Points Location• Stack Gas Velocity and Volumetric Flow Rate• Stack Gas Moisture Content• Stack Gas Saturation Moisture Content• Ideal Nozzle Size and K-Factor with ∆H Loop• Post-Test Isokinetics• DGM Field Calibration using Critical Orifices

m5a-c

M5A-C

Isokinetic M5A-C CalculatorThe Casio Graphic Scientific Calculator comes pre-programmed with valuable Isoki-netic stack sampling calculations making field calculations quick and easy. Programmed in English and metric units. M5A-1


ACCESSORIES

Alumina....................................................... 19dBalances ..................................................... 16d-17dBushings ..................................................... 20d-21dCam-Lock, Flanges, Port Adapters & Packing Glands ....................................... 20d-21dCouplings.................................................... 20d-21d Components List, XC-522 / XC-572 ........... 10dDessicator & Dessicants............................. 18dDrierite Dessicants ..................................... 19dDrierite Dessicants ..................................... 20dDry Gas Meter Calibration Services ........... 22dDry Gas Meters .......................................... 27dElectrical/Electronic Parts ........................... 28dEquipment Cases ....................................... 32dFilter Media ................................................. 11d-12dFlange Reducers ........................................ 20d-21dFlow Adapters ............................................. 25d-25dHardware .................................................... 30dHose, Air ..................................................... 27dHose, Polyspring ........................................ 27dInclinometers .............................................. 25dIsokinetic Calculators & Spreadsheets ....... 34dManometers................................................ 23dManuals & Reference Materials ................. 34dMeter Calibration Equipment & Services .... 23dMeter Calibration Equipment & Services .... 23dMonorails .................................................... 33dMonorail Accessories.................................. 34dManometers................................................ 23dMercury, Spare Parts .................................. 3d-9dMercury, Console & Spare Parts ................ 3d-9d

Accessories

Mercury, Probes ......................................... 3d-9dMercury, Coolers ........................................ 3d-9dMercury, Probe Accessories ....................... 3d-9dOrifice Flow Meters ..................................... 24dParticle Sizing Data Reduction WINCIDRS Software .................................. 34dPFA Column Components .......................... 15dPFA Impingers & Accessories..................... 15dPFA Stems & Fittings .................................. 15dPFA Filter Assemblies ................................. 15dPitot Audit Equipment ................................. 23dPitot, Replacement Tips.............................. 27dPumps & Accessories ................................. 31dQuick Connects .......................................... 30dRotometers ................................................. 24dSample Recovery ....................................... 13dSample Recovery Accessories ................... 14dSample Recovery Bottles ........................... 14dSilica Gel .................................................... 19dStainless Steel Fittings ............................... 29dSupplies, Tape ............................................ 32dTubing, PTFE ............................................. 26dTubing, PFA ................................................ 26dTubing, PFA Stainless Steel Overbraid ...... 26dTubing, Stainless Steel ............................... 26d-27dTubing, Polyurethane ................................. 26dTubing, Polyethylene .................................. 26dTubing, PVC ............................................... 27dTubing, Braided Sleeving ........................... 27d

TERMS AND CONDITIONS

PRICES AND TERMSOur prices are subject to change without notice. The price in effect when we receive your order will apply. All prices are Ex Works Holly Springs, North Carolina. We will be pleased to furnish quotations by phone, fax or e-mail. Terms of payment are Net 30 days with established credit, or by Visa/MasterCard/American Express at time of order. Invoices over 30 days past due are subject to 1.5% permonth finance charge.

CONFIRMINg ORDERSPlease make sure that all confirming orders are clearly marked to avoid duplicate orders.

SHIPMENTS AND DELIVERYUnless otherwise instructed, shipments are made as soon as possible after receipt of order by method of transportation which in our judgement will be most satisfactory. Freight charges are prepaid and added to the invoice. The right is reserved to make partial shipments where delays beyond our control may delay a portion of the order.

EXPORT PROCESSINg AND PRICINgPrices do not include customs and duty charges, freight, insurance, export fees, bank wire transaction fees or any additional handling fees.

RETURNED ITEMSAuthorization must be obtained from us before returning any goods. When requesting return authorization, please advise reason for return, date of purchase, your P.O. number and our invoice number. Equipment produced to special specifications are not returnable. All returns must be shipped freight prepaid at the purchasers expense and are subject to a restocking fee.

LIMITED WARRANTYAPEX INSTRUMENTS, INC. warrants products to be free from defects in workmanship for a period of one year from date of delivery. The sole and exclusive remedy for defective goods shall be to repair or replace defective parts or payment price of the goods for which damages are claimed at APEX INSTRUMENTS, INC.’s option. Freight for return of defective items will be at the sole discretion of APEX INSTRUMENTS, INC. Except as described in our guarantee, there are no express warranties or implied warranties including, but not limited to, merchantability and fitness for a particular purpose. APEX INSTRUMENTS, INC. shall not be subject to and disclaims: (1) any other obligations or liabilities arising out of breach of contract or warranty, (2) any obligations whatsoever arising from tort claims (including negligence and strict liability) or arising under other theories of law with respect to products sold or services rendered by APEX INSTRUMENTS, INC., or any undertakings, acts or omissions relating thereto, and (3) all consequential, incidental and contingent damages whatsoever.

DESIgN CHANgESDesign changes are made from time to time. Some items may differ slightly from catalog illustrations or descriptions. Changes are made in the interest of better performance and quicker delivery.

ACCEPTANCE OF TERMS AND CONDITIONSAPEX INSTRUMENTS, INC. sells products only under foregoing terms and conditions and will not be bound to terms and conditions stated by any purchaser in any offer, acceptance or other contractual document. Placing an order or accepting delivery of products constitutes acceptance of terms and conditions.

Great care has been taken in preparation of this literature, however, we cannot be responsible for any omissions or typographical errors.

204 Technology Park LaneFuquay-Varina, North Carolina 27526, U.S.A.

Telephone: 919-557-7300In U.S. Call: 800-882-3214

Fax: 919-557-7110Email: [email protected]

apex inSTrumenTS, inc.Solutions for Source Sampling EquipmentApex Instruments is a world leader in the manufacture, design and distribution of source sampling equipment. Our products are used in a wide variety of sampling scenarios. Our equipment complies with emissions measurement standards for stationary combustion sources in accordance with US EPA guidelines. We are located approximately 20 miles from the United States Environmental Protection Agency in Research Triangle Park, N.C. Our goal is to provide you with the proper, well engineered equipment in order for your job to run smoothly and have consistent, accurate and reliable results.

Technical SerViceSApex Instruments understands the needs and high demands of the individuals working in the source sampling industry. The primary end users of our equipment consist of government agencies, consulting firms and private industries throughout North America and in 50 countries around the globe. Our knowledgeable staff includes many skilled industry professionals, stack testers and chemists. They all will help you to make important decisions regarding your specific application needs.

caliBraTion SerViceSApex Instruments offers dedicated, climate controlled, precision calibration services for a variety of measuring instruments. This includes gas meters, orifices and pitot tubes to help keep all your calibration equipment up-to-date. Our trained staff will utilize the reliable calibration equipment and tools such as NIST Certified Bell Prover wet test meters, electronic flow calibrators and wind tunnels. We offer a certification of calibration when requested.

cuSTom FaBricaTion anD aSSemBlYApex Instruments’ custom-designed facility was built in 2005. The warehouse layout provides a smooth flow for the assembly and fabrication departments. We can design, build and expedite all equipment orders quickly through our in-house engineering, production and welding departments. Apex continues with their steady commitment to quality in compliance testing, by consistently designing and developing reliable source sampling equipment. We folllow guidlines set by U.S. EPA Reference Methods and always keeping the genuine needs of the stack samplers in mind.

aWarDSApex Instruments recently received the (SHARP) Safety and Health Achievement Award from the NC (DOL) Department of Labor. This program recognizes small to medium size businesses that establish and maintain effective safety standards and health programs. We were also ranked in the top 500 by Inc. Magazine as being one of the fastest growing privately held companies.

www.apexinst.com

EquipmEntCatalog

Distributed by:

Publication:Date Issued:

PEC-Catalog1-01-12

GAS ANALYSIS

FLOW PRESSURE

ISOKINETIC

MERCURY

ACCESSORIES

2012 equipment catalog 6-20-12 np

Documents

customer service vjones apexinst

graduated cylinder 250ml

anhydrous calcium sulfate

removeable lip tray

pmpgraduated cylinder 250ml

fluorocarbon resin binders

poly donut spacer

polycyclic aromatic hydrocarbons