MATERIAL SAFETY DATA SHEET

Eaton Aeroquip Hose Assembly Lube

Last Update: July 9, 2014

SECTION I: PRODUCT IDENTIFICATION

Product name or number:

Reference Part Numbers: Aeroquip Hose Assembly Lube NSN# 915000N024686

222070, FBM3553, FCM3553, M/00102-0151 Emergency telephone number: 419-832-0235 Manufacturer’s name: Paramount Products for Eaton Corporation Address: 10550 Providence Neapolis Swanton Road

Distribution Channel:

Grand Rapids, Ohio 43522

www.Aeroquip.cc / Murdock Industrial Inc. Manufacturer’s DUNS number: 60-687-0947 Hazardous material description (49 CFR 172.101): None

HMIS Health 1 Fire 1 Reactivity 0 Contact B

Additional hazard classes (as applicable): None Chemical family: N/A Formula: Blend SECTION II: INGREDIENTS CAS registry number % weight Chemical name(s) Exposure limit

64742-65-0 80% HSR PARAFFINIC OIL 5mg/m3

9003-29-6 20% VI IMPROVER none SECTION III: PHYSICAL PROPERTIES Pale Amber, viscous oil. SECTION IV: FIRE AND EXPLOSION HAZARD DATA

Flash point: 400° F

Method used: COC Flammable limits: LEL: N/A UEL: N/A Extinguishing media: Fog, foam, and CO

2 Use water fog. Do not use direct stream

water

Special fire fighting procedures: DO not enter confined fire space without proper protective equipment. This may include self-contained breathing apparatus to protect against the hazardous effect of combustion products and oxygen deficiencies. Cool fire exposed containers with water. Unusual fire and explosion hazards: None

SECTION V: HEALTH HAZARD DATA

Effects of overexposure/conditions to avoid: Threshold limit value: Permissible exposure limit: Primary routes of entry:

Prolonged contact with the concentrate may cause skin

and eye irritation N/A N/A Skin and eyes

Emergency and first aid procedures

Eyes: Flush with water for 15 minutes. If irritation persists, seek medical assistance. Skin: Flush with water for 15 minutes. If irritation persists, seek medical assistance. Ingestion: Do not induce vomiting. Give large amounts of water or milk if available and seek medical assistance.

SECTION VI: REACTIVITY DATA

Conditions to avoid: None Stability: Stable Incompatibility (materials to avoid): Strong oxidizing agents Hazardous decomposition products: CO, CO

2, oxides of nitrogen and sulfur

Hazards: None known Conditions to avoid: None known Polymerization: Will not occur

SECTION V11: SPILL OR LEAK PROCEDURES

Steps to be taken in case material spills or leaks: Dike spill area with absorbent material. Pump liquid into approved container. Clean up residue with absorbent material and water. CAUTION: SLIP HAZARD. Waste disposal method: According to federal, state, and local regulations. CERCLA reportable quantity (in pounds) N/A RCRA hazardous waste number: N/A Volatile organic compound: None Weight per gallon: Analytical pounds

SECTION VIII: SPECIAL PROTECTION INFORMATION

Respiratory protection: No special requirements with adequate ventilation Ventilation: N/A Special: N/A Other: N/A Protective gloves: Rubber Eye protection: Safety goggles Other protective equipment: As requested by operators

SECTION IX: SPECIAL PRECAUTIONS

Storing and handling: Keep container closed when not in use. Other precautions: Do not reuse empty container. Do not pressurize container.

Pg 2 of 2 UPDATE

7/9/2014