234 arslan exp1-it (85l) ex (cfe) sk hepa4].pdf · exp1-20l (dt) re hepa (mfs) brochure -...

Arslan Automotive Inc.84 Leacock

Pointe Claire, QCH9R 1H1 - Canada

Tel: (514) 694-1113Fax: (514) 694-6277

Toll Free: 1-800-465-8575

[email protected]

This document: 09/09/14 | page 1 | Ce document est disponible en français.

50-EXP1-ITEXP1-20L (DT) RE HEPA (MFS)Pharma* - Dry Recovery

EXP1 models certified for :Class I, Division 1, Group D T3C andClass II, Division 1, Groups E, F and G

GUARANTEED for the saferecovery of combustible/conductivedusts &/or flammable liquids.

Characteristics

Explosion Proof Resistivity:Less than 10

ohms

HEPA Included ULPA Optional Dry Recovery Stainless SteelAISI 304

StaticDissipating

Toolkit

High Efficiency DetachableTank

CleanroomApplications

PharmaApplications

Legally certified explosion proof/dust ignition proof by a recognizedtesting laboratory Less than 10 Ohms of resistivity HEPA Filter -Included with an efficiency of 99.995% on 0.3 micron. Tested: IESTRP-CC001.3. H14 by MPPS method as per EN 1822. *Cleanroomcompatible. Can be used in the pharmaceutical industry withoptional stainless steel cart Designed for applications where finelypulverized dust is to be recovered Single phase explosion proof/dustignition proof motor Available with Manual Filter Shaker (MFS) systemFor dry recovery only All stainless steel SAE 304 construction (exceptcart). Stainless steel cart available Detachable recovery tank (DT). Recovery capacity of 6.25 gallons (25 liters) SD* polyliner and clipavailable for easy and safe disposal of recovered materials Equippedwith an SD* 4-wheel cart and tool basket Complete static dissipatingtool kit and suction hose included 35L detachable recovery tank isavailable SD* Static Disspative

All stainless steel SAE 304 construction (except cart). Less than 10 Ohms of resistivity. This unit is equippedwith a true HEPA (H14) Filter located downstream of the motor. This unit is cleanroom compatible and canbe used in the phamaceutical industry when equipped with an optional stainless steel cart. This unit hasbeen designed for applications where finely pulverized dust is to be recovered. This dry only unit contains aManual Filter Shaker (MFS) system. All of our HEPA vacuum cleaners are Aerosol Leak Tested before leavingour facility.

Tiger-Vac Inc. (USA)73 S.W. 12 Ave. Bldg. 1, Unit 7Dania, FL33004, USA

Tiger-Vac International Inc.2020 Dagenais Blvd. WestLaval, QuebecH7L 5W2, Canada

Tel: 1-800-668-4437 (954-925-3625)Fax: 1-800-668-4439 (954-925-3626)

Website: www.tiger-vac.comE-mail: [email protected]

EXP1-20L (DT) RE HEPA (MFS) Brochure - Downloaded: September 8, 2014 - Modified: July 11, 2014 - Page:1 / 4

• Legally certifi ed explosion proof/dust ignition proof by an OSHA approved Nationally Recognized Testing Laboratory (NRTL)

• Less than 10 Ohms of resistivity• Coalescing Filter Element (CFE) for moisture removal• HEPA Filter - Included with an effi ciency of 99.995% on 0.3 micron.

Tested: IEST RP-CCpp1.3. H14 by MPPS as per EN 1822.• Designed for the recovery and neutralization of conductive and

explosive dust into a liquid immersion bath• Electrically operated - 120V Single Phase• Stainless steel SAE 304 Interceptor tank• Recovery capacity of 22 lbs (10 kg) of dust into 7.9 gallons (30 liters)

of neutralizing liquid• Portable and equipped with single or dual SD* suction hose

connector• Equipped with a detachable recovery tank for easy emptying of

recovered materials• Equipped with a Liquid Level Indicator Tube• Arslan Automotive recommends the use of Mineral Oil with a

viscosity = 10.5 cSt• Arslan Automotive carries a large inventory of shrouded sanders,

grinders, dustless drill kits along with a large suction port for maximum dust recovery

This unit has been designed for the recovery of metallic, conductive and explosive dusts into an immersion liquid bath such as water, parafi n oil, mineral oil and others. This unit renders any hazardous dust inert. Equipped with a detachable recovery tank for easy disposal of recovered materials. All of our HEPA Dustless Sanding Kits are Aerosol Leak Tested before leaving our facility.

SS-IT (85L) EX (CFE) SK HEPAAutomotive/Aerospace - Dust Extraction/Vacuum Sanding Kit

System


Designed for use in Class I, Division 1, GroupsA, B, C and D T6 and Class II, Division 1, GroupsE, F, G, Hazardous Locations as defined in theNational Electric Code (NFPA 70)

II 2 G/D c IIC T6 (85oC)LCIE 03 ATEX 6310 See Certificate

Characteristics

Explosion Proof Resistivity: Lessthan 10 ohms

HEPA Included High Efficiency

Dry Recovery Stainless SteelAISI 304

Coalescing FilterElement

Detachable Tank

Legally certified explosion proof/dust ignition proof by a recognized testing laboratoryCoalescing Filter Element (CFE) for moisture removalHEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bathPneumatically (air) operatedStainless steel SAE 304 Interceptor tankRecovery capacity of 22 lbs (10 kg) of dust into 7.9 gallons (30 liters) of neutralizing liquidPortable and equipped with single or dual SD* suction hose connectorEquipped with a detachable recovery tank for easy emptying of recovered materialsEquipped with a Liquid Level Indicator TubeTiger-Vac recommends the use of Mineral Oil with a viscosity = 10.5 cSt

This unit has been designed for the recovery of metallic, conductive and explosive dusts into an immersionliquid bath such as water, parafin oil, mineral oil and others. This unit renders any hazardous dust inert.Equipped with a detachable recovery tank for easy disposal of recovered materials. All of our HEPA

Dustless Sanding Kits are Aerosol Leak Tested before leaving our facility.



Tel: 1-800-668-4437 (954-925-3625)Fax: 1-800-668-4439 (954-925-3626)


SS-IT (85L) EX (CFE) SK HEPA Brochure - Downloaded: September 11, 2014 - Modified: September 11, 2014 - Page:1 / 3

SS-IT (85L) EX (CFE) SK HEPAAutomotive/Aerospace - Dust Extraction/Vacuum Sanding Kit

System


Designed for use in Class I, Division 1, GroupsA, B, C and D T6 and Class II, Division 1, GroupsE, F, G, Hazardous Locations as defined in theNational Electric Code (NFPA 70)

II 2 G/D c IIC T6 (85oC)LCIE 03 ATEX 6310 See Certificate

Characteristics

Explosion Proof Resistivity: Lessthan 10 ohms

HEPA Included High Efficiency

Dry Recovery Stainless SteelAISI 304

Coalescing FilterElement

Detachable Tank

Legally certified explosion proof/dust ignition proof by a recognized testing laboratoryCoalescing Filter Element (CFE) for moisture removalHEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bathPneumatically (air) operatedStainless steel SAE 304 Interceptor tankRecovery capacity of 22 lbs (10 kg) of dust into 7.9 gallons (30 liters) of neutralizing liquidPortable and equipped with single or dual SD* suction hose connectorEquipped with a detachable recovery tank for easy emptying of recovered materialsEquipped with a Liquid Level Indicator TubeTiger-Vac recommends the use of Mineral Oil with a viscosity = 10.5 cSt

This unit has been designed for the recovery of metallic, conductive and explosive dusts into an immersionliquid bath such as water, parafin oil, mineral oil and others. This unit renders any hazardous dust inert.Equipped with a detachable recovery tank for easy disposal of recovered materials. All of our HEPA

Dustless Sanding Kits are Aerosol Leak Tested before leaving our facility.



Tel: 1-800-668-4437 (954-925-3625)Fax: 1-800-668-4439 (954-925-3626)


SS-IT (85L) EX (CFE) SK HEPA Brochure - Downloaded: September 11, 2014 - Modified: September 11, 2014 - Page:1 / 3

ImmersionSeparatorImmersion

Separator



Tel: (514) 694-1113Fax: (514) 694-6277

Toll Free: 1-800-465-8575

[email protected]


SpecificationsUnit EXP1-IT (85L) EX (CFE) SK HEPA

Weight lbs 231

Filter Immersion Separator

Decibels dB 75

Dimensions Inches H23.5 × W41 × L69.5

Dry Recovery Gal 5

Vacuum Pressure Inches H2O 69

Air Flow CFM 132

Phase Single

Horse Power HP 1.3

Amperage A 9

Wattage W 1000

Hertz Hz 60

Voltage V 120

Plug Not Inc.

High Efficiency Particulate Air FilterA HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleanersystem. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with asize of 0.3 micron or larger.

North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested asper IEST-RP-CC001.3 and OSHA compliant.

Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN1822 by MPPS method.



Tel: 1-800-668-4437 (954-925-3625)Fax: 1-800-668-4439 (954-925-3626)



Explosion Proof RequirementIn order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unitmust be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms to anypoint on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proofand be part of Tiger-Vac's quality control management system ISO 9001:2008.When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that thesource of air supply (compressor) is grounded.

Ex-Mat RecoveryTiger-Vac, as the manufacturer, GUARANTEES, that these units can be used tosafely recover combustible /conductive dusts and/or flammable liquids.

The ATEX marking certifies only, by it's Ingress of Protection (IP), the capacity ofthe vacuum cleaner to be in the presence of combustible /conductive dusts and/orflammable liquids but does not certify the capacity of the vacuum cleaner torecover them.

SpecificationsUnit EXP1-IT (85L) EX (CFE) SK HEPA

Weight lbs 231

Filter Immersion Separator

Decibels dB 75

Dimensions Inches H23.5 × W41 × L69.5

Dry Recovery Gal 5

Vacuum Pressure Inches H2O 69

Air Flow CFM 132

Phase Single

Horse Power HP 1.3

Amperage A 9

Wattage W 1000

Hertz Hz 60

Voltage V 120

Plug Not Inc.

High Efficiency Particulate Air FilterA HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleanersystem. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with asize of 0.3 micron or larger.

North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested asper IEST-RP-CC001.3 and OSHA compliant.

Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN1822 by MPPS method.



Tel: 1-800-668-4437 (954-925-3625)Fax: 1-800-668-4439 (954-925-3626)



Explosion Proof RequirementIn order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unitmust be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms to anypoint on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proofand be part of Tiger-Vac's quality control management system ISO 9001:2008.When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that thesource of air supply (compressor) is grounded.

Ex-Mat RecoveryTiger-Vac, as the manufacturer, GUARANTEES, that these units can be used tosafely recover combustible /conductive dusts and/or flammable liquids.

The ATEX marking certifies only, by it's Ingress of Protection (IP), the capacity ofthe vacuum cleaner to be in the presence of combustible /conductive dusts and/orflammable liquids but does not certify the capacity of the vacuum cleaner torecover them.

UNIT 50-EXP1-ITFilter Immersion SeparatorDecibels dB 75Dimensions Inches H23.5 x W41 x L69.5Weight Lbs 231Dry Recovery Gal 5Vacuum Pressure Inches H2O 69Air fl ow CFM 132Phase SingleHorse Power HP 1.3Amperage A 9Wattage W 1000Hertz Hz 60Voltage V 120Plug Not Inc.

In order to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof.When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.

We GUARANTEE that these units can be used to safely recover combustible /conductive dusts and/or fl ammable liquids.

The ATEX marking certifi es only, by it’s Ingress of Protection (IP), the capacity of the vacuum cleaner to be in the presence of combustible /conductive dusts and/or fl ammable liquids but does not certify the capacity of the vacuum cleaner to recover them.



Tel: (514) 694-1113Fax: (514) 694-6277

Toll Free: 1-800-465-8575

[email protected]


HEPA FILTER - Included

Part# Qty Description

211027B 1 HEPA FILTER (H14)

FILTERS - Included


215177A 1 MAIN FILTER ASSEMBLY SD* PTFE, w/GASKET & RING, w/LACES, FOR SS/EXP-20 DT (CAGE SOLD SEPARATELY)

214880B 1 WIRE CAGE FOR FILTER -POWDER COATED

PRE-FILTERS - Optional


215179 1 PREFILTER ONLY WITH ELASTIC, SD*

POLY LINER RECOVERY BAGS AND ACCESSORIES - Optional


212100DS 1 CONDUCTIVE POLY LINER WITH DRAW STRING (20/25 LITRES)

212100DS-5 1 CONDUCTIVE POLY LINER WITH DRAW STRING (20/25 LITRES)(PACKAGE OF 5)

213780 1 POLY LINER RETAINER PLATE WITH CLIP



Tel: 1-800-668-4437 (954-925-3625)Fax: 1-800-668-4439 (954-925-3626)



EXPLOSION PROOF TOOLS AND ACCESSORIES - MANDATORY FOR USE WHEN RECOVERING CONDUCTIVE, METAL ANDPYROTECHNIC DUST. STATIC DISSIPATIVE (LESS THAN 10 OHMS OF RESISTIVITY) - Included


381400B 1 KANAFLEX SUCTION HOSE ASSEMBLY SD* Ø1.5"(38mm)x10'(3m)W/HOSE CUFF&RING, FOR USE WITH

381364A 1

2"(50mm)CAMLOCK

WAND ASSEMBLY (2PCS), STAINLESS STEEL w/ALUMINUM ATTACHMENT, w/TAPER FOR USE w/HOSE CUFF w/RING

381236 1

381372D 1

381185DA 1

383462D 1

211065B 1

UNIVERSAL TOOL SD* W/CONDUCTIVE BRUSH STRIPS,RUBBER BLADES,BRASS AXLE&WHEELSØ1.5"(38mm)x18"(45.7cm)

CREVICE TOOL, Ø1.5"(38mm)x11"(27.9cm) -STAINLESS STEEL (FOR USE WITH HOSE CUFF & RING)

DUSTING BRUSH -ALUMINUM SD* 5"(12.5cm) WITH CONDUCTIVE BRISTLES FOR USE WITH HOSE CUFF & RING

CONICAL NOZZLE ASSEMBLY w/CURVED TIP 10"(25cm)CONDUCTVE RUBBER FOR HOSECUFF&RING(383462M+381147D)

MULTIMETER

STATIC CONDUCTIVE TOOLS AND ACCESSORIES (RESISTIVITY OF 10/3 - 10/5) - Optional


383440B 1 STATIC CONDUCTIVE CRUSHPROOF SUCTION HOSE ASSEMBLY(NO WIRE)Ø1.5"(38mm)x10'(3m) FOR 2" CAMLOCK

381364 1

INTAKE

WAND ASSEMBLY (2PC) STAINLESS STEEL WITH ALUMINUM ATTACHMENT

381236 1

381188 1


CREVICE TOOL SD* 11"(27.9cm), ALUMINUM

381185A 1

383462 1

DUSTING BRUSH SD* WITH STAINLESS STEEL COUPLING & CONDUCTIVE BRISTLES 5"(12.5cm) -ALUMINUM

CONICAL NOZZLE ASSEMBLY W/CURVED TIP, 10"(25cm) CONDUCTIVE RUBBER, FOR NON WIRE HOSE(323562+381155)

HEPA FILTER - Included


211027B 1 HEPA FILTER (H14)

FILTERS - Included


215177A 1 MAIN FILTER ASSEMBLY SD* PTFE, w/GASKET & RING, w/LACES, FOR SS/EXP-20 DT (CAGE SOLD SEPARATELY)

214880B 1 WIRE CAGE FOR FILTER -POWDER COATED

PRE-FILTERS - Optional


215179 1 PREFILTER ONLY WITH ELASTIC, SD*

POLY LINER RECOVERY BAGS AND ACCESSORIES - Optional


212100DS 1 CONDUCTIVE POLY LINER WITH DRAW STRING (20/25 LITRES)

212100DS-5 1 CONDUCTIVE POLY LINER WITH DRAW STRING (20/25 LITRES)(PACKAGE OF 5)

213780 1 POLY LINER RETAINER PLATE WITH CLIP



Tel: 1-800-668-4437 (954-925-3625)Fax: 1-800-668-4439 (954-925-3626)



EXPLOSION PROOF TOOLS AND ACCESSORIES - MANDATORY FOR USE WHEN RECOVERING CONDUCTIVE, METAL ANDPYROTECHNIC DUST. STATIC DISSIPATIVE (LESS THAN 10 OHMS OF RESISTIVITY) - Included


381400B 1 KANAFLEX SUCTION HOSE ASSEMBLY SD* Ø1.5"(38mm)x10'(3m)W/HOSE CUFF&RING, FOR USE WITH

381364A 1

2"(50mm)CAMLOCK

WAND ASSEMBLY (2PCS), STAINLESS STEEL w/ALUMINUM ATTACHMENT, w/TAPER FOR USE w/HOSE CUFF w/RING

381236 1

381372D 1

381185DA 1

383462D 1

211065B 1


CREVICE TOOL, Ø1.5"(38mm)x11"(27.9cm) -STAINLESS STEEL (FOR USE WITH HOSE CUFF & RING)

DUSTING BRUSH -ALUMINUM SD* 5"(12.5cm) WITH CONDUCTIVE BRISTLES FOR USE WITH HOSE CUFF & RING

CONICAL NOZZLE ASSEMBLY w/CURVED TIP 10"(25cm)CONDUCTVE RUBBER FOR HOSECUFF&RING(383462M+381147D)

MULTIMETER

STATIC CONDUCTIVE TOOLS AND ACCESSORIES (RESISTIVITY OF 10/3 - 10/5) - Optional


383440B 1 STATIC CONDUCTIVE CRUSHPROOF SUCTION HOSE ASSEMBLY(NO WIRE)Ø1.5"(38mm)x10'(3m) FOR 2" CAMLOCK

381364 1

INTAKE

WAND ASSEMBLY (2PC) STAINLESS STEEL WITH ALUMINUM ATTACHMENT

381236 1

381188 1


CREVICE TOOL SD* 11"(27.9cm), ALUMINUM

381185A 1

383462 1

DUSTING BRUSH SD* WITH STAINLESS STEEL COUPLING & CONDUCTIVE BRISTLES 5"(12.5cm) -ALUMINUM

CONICAL NOZZLE ASSEMBLY W/CURVED TIP, 10"(25cm) CONDUCTIVE RUBBER, FOR NON WIRE HOSE(323562+381155)

ACCESSORIES - IncludedPart# Qty Description

303019D 1 SUCTION/AIR HOSE, STATIC CONDUCTIVE CRUSHPROOF, 20’ = (15’ X Ø1.25”) + (5’ X Ø1”) WITH 6’ SLEEVE (ONE (1) INCLUDED)

501503 1 WYE CONNECTOR 2 X 1.25”. ASSEMBLED WITH ONE PLUG



Tel: (514) 694-1113Fax: (514) 694-6277

Toll Free: 1-800-465-8575

[email protected]


GROUNDING REEL - Optional


211191 1 GROUNDING REEL WITH STAINLESS STEEL CABLE WITH AIRCRAFT GROUNDING CLAMP 50'(15m)

MALE PLUG AND FEMALE RECEPTACLE - CLASS I - GROUP D AND CLASS II GROUPS F & G - Optional


211912 1 MALE PLUG EXPLOSION PROOF MODEL CRH ENP5151, 120V 1PHASE 15 AMPS

211913 1 RECEPTACLE EXPLOSION PROOF MODEL CRH ENR5201, 120V, 1PHASE, 15 & 20 AMPS

WARNINGS:For the recovery of metallic dusts, it is recommended that this unit be used in conjunctionwith an immersion separatorOnly tools and accessories provided by Tiger-Vac shall be used with thisvacuum cleaner. Any other tools used will render the warranty null and void and may cause an explosionwhich could result in bodily harm. Tiger-Vac will not assume any responsiblity for damage that may occurdue to the improper use or handling of the vacuum cleaner system.



Tel: 1-800-668-4437 (954-925-3625)Fax: 1-800-668-4439 (954-925-3626)



WARNINGS:Only tools and accessories provided by Arslan Automotive shall be used with this vacuum cleaner. Any other tools used will render the warranty null and void and may cause an explosion which could result in bodily harm. Arslan Automotive will not assume any responsiblity for damage that may occur due to the improper use or handling of the vacuum cleaner system.

234 arslan exp1-it (85l) ex (cfe) sk hepa4].pdf · exp1-20l (dt) re hepa (mfs) brochure -...

Documents