24hr. led dawn/dusk/lunar light controller quick ... · resume programming,_p[z h k`uhtpj tvkl huk...
TRANSCRIPT
Dual Ramp Timer 24hr. LED Dawn/Dusk/Lunar Light Controller
Quick Installation Process
Wireless IR Remote
Dual Ramp Timer withTwo LED Strips
Dual Ramp Timer to Single LED
LED Light
LED Light
12-24VDCTransformer
12-24VDCTransformer
IR Sensor
Quick Installation GuideConnecting the Dual Ramp Timer to your LED light(s)
1. Connect your 12-24VDC transformer to the female DC plug on the timer.
2. Connect your LED light(s) to the male DC plugs on the timer. Blue light channel (dawn/dusk/moonlight) connects to Line 1. White light channel (daylight) connects to Line 2 (refer to tags on controller cable).
3. Remove plastic cover from wireless remote and remove clear plastic tablocated at the bottom of the remote.
4. Locate a dry location not near water or salt creep. Clean area thoroughly.
5. Use velcro included to mount Dual Ramp Timer to mounting location.
Note: Ramp Timer Pro and remote are NOT waterproof. Ensure neitherare located in a location of splashing water or salt creep.
Strip with 2 Channels
Page 1
Ch1 Time
Ch2 Time
Main on/offResume programming
Sets 24hr. clock
Controls line 1
Controls line 2
Main adjustment
Program on/off
Intensity adjust
Manual color adjustment
Programming Using the Wireless IR Remote
HOUR MINUTE
SET CLOCK
Ch1 Time
Ch2 Time
Quick Installation Guide Continued
Step 1: Setting the clock
Step 2: Setting On/off times
HOUR MINUTE
HOUR MINUTE
Ch2 Time
Ch1 Time
Step 3: Setting Minimum and Maximum Intensity
HOUR MINUTE
HOUR MINUTE
Page 2
Programming Using the Controller Keypad
Enter
Setting the clock
Enter
Setting the “ON” time for channel 2
Manual Color Adjustment
’
RESUME
Moonlighting
Recommended Lighting Schedules
Page 4