250-270-administration of symantec netbackup 7.0 for unix

8/11/2019 250-270-Administration of Symantec NetBackup 7.0 for Unix

1/82

Symantec 250-270

250-270 Administration of Symantec NetBackup 7.0 for

Unix


2/82

QUESTION NO: 1

.A company has just expanded the Symantec NetBackup 7.0 environment by adding an additional

media server. What is the fastest way to update several hundred Symantec NetBackup clients with

the new media server information?

A. run theupdate_all_clients scriptB. run theadd_media_server_on_clients script

C. specify the new media server in the Backup, Archive, and Restore interface

D. specify the new media server in the client properties

Answer: B

QUESTION NO: 2

.A tape library had the robot firmware upgraded and now the robot is reading the barcodes with

additional characters. What can be set so that Symantec NetBackup 7.0 uses the same characters

as before the firmware upgrade occurred?

A. Media ID generation

B. Media ID display

C. media type mapping

D. barcode rules

Answer: A

QUESTION NO: 3

.Which two media status designations are excluded in the count against maximum number of

partially full media? (Select two.)

A. Frozen

B. Imported

C. Active

D. Available

E. Inactive

Answer: A,B

QUESTION NO: 4

2


3/82

.An administrator has created three BasicDisk storage units within the NetBackup Administration

Console (STU-A, STU-B, and STU-C). The administrator needs to create a backup policy that

evenly rotates use of each of these storage units during backup. How can the policies or storage

units be set up to accomplish this?

A. set up each of the policies to use "Any Available" storage unit

B. set up a storage unit group for these STUs andselect "Failover" option for storage unit selection

C. set up a storage unit group for these STUs andselect "Least recently selected storage unit"

option

D. set up a storage unit group for these STUs andselect "Choose storage units based on order

specified above" option

Answer: C

QUESTION NO: 5

.An organization has Symantec NetBackup 7.0 client machines with a large number of files

distributed across multiple file systems that are being backed up to a library with high-speed tape

drives. Which two steps should the administrator take to ensure the greatest number of backup

streams are active concurrently? (Select two.)

A. select the "Enable multiple data streams" policy attribute and edit the "Maximum jobs per client"

master server host propertyB. create a "Media Server Load Balancing" type storage unit group to enable additional backup

streams to become active simultaneously

C. enable the client-side deduplication feature so that only unique data is sent from the client to

the media server

D. select the Enable multiplexing attribute within the storage unit and the policy schedule

E. configure the "Max drives this master" attribute to the number of tape drives that are available

within the library

Answer: A,D

QUESTION NO: 6

.Where are exclude list configurations stored?

A. media server

B. master server

C. client

D. Enterprise Media Manager (EMM) server

3


4/82

Answer: C

QUESTION NO: 7

.The configuration parameters MIN_GB_SIZE_PER_DUPLICATION_JOB and

IMAGE_EXTENDED_RETRY_PERIOD_IN_HOURS are part of the configuration for which

feature?

A. Catalog Replication

B. FlashBackup

C. Storage Lifecycle Policy

D. NetBackup Vault

Answer: C

QUESTION NO: 8

.Which two items are required to use the Catalog Recovery Wizard? (Select two.)

A. BMR file

B. media used for the catalog backup

C. catalog backup policy

D. DR file

E. critical policy list

Answer: B,D

QUESTION NO: 9

.Which two statements are true about the function of the Initiate Import utility in SymantecNetbackup 7.0? (Select two.)

A. Phase Icreates a list of expired images.

B. Phase II lists and creates image files from tape or disk.

C. Phase Ireads and creates image files in the image database.

D. Phase I requires each tape to be mounted if tape media is used.

E. Phase II imports the backups and creates fragments.

Answer: A,D

4


5/82

QUESTION NO: 10

.Which two types of information are displayed in the Tape Summary report? (Select two.)

A. the number of tapes that are suspended

B. the number of tapes that are offsite

C. the number of tapes that are using compressionD. the number of tapes that are active

E. the number of tapes each client is using

Answer: A,D

QUESTION NO: 11

.A restore must be performed. The administrator is trying to view the valid images for a client, butthe following error occurs:

WARNING: Server does not contain any valid images. Which two may be incorrectly configured?

(Select two.)

A. schedule type for restores

B. destination client for restores

C. server to use for backups and restores

D. media server for backups and restores

E. policy types for restore

Answer: C,E

QUESTION NO: 12

.How long will a failed restore job remain in an Incomplete state prior to being moved to a Done

state?

A. one day

B. three days

C. seven days

D. until the administrator cancels the restore job

Answer: C

QUESTION NO: 13

5


6/82

.An administrator successfully creates a disk pool for Symantec NetBackup 7.0, then attempts to

create a new storage unit using the bpstuadd command. In the bpstuadd command, the storage

unit name is specified as diskpool1_storageunit-#01. An error message is returned indicating the

storage unit name is invalid. How should the storage unit name be modified to fix the problem?

A. remove the "-" from the name

B. remove all the numbers from the name

C. remove the "#" from the name

D. shorten the name to fewer than twenty characters

Answer: C

QUESTION NO: 14

.Catalog configuration can be configured to email which file to aid in catalog recovery?

A. BMR file

B. master serverconfig file

C. support script output

D. DR file

Answer: D

QUESTION NO: 15

.An administrator is remotely logged into a Symantec NetBackup 7.0 server via the terminal

window and needs to configure robots and drives. Which command should be used to complete

the configuration?

A. vmconf

B. tpreqC. nbdevconfig

D. tpconfig

Answer: D

QUESTION NO: 16

.In a Symantec NetBackup 7.0 environment, where does the image database reside?

A. within the EMM database

6


7/82

B. on the media server

C. on the master server

D. within the master server's Sybase database

Answer: C

QUESTION NO: 17

.Which two databases are used by Symantec NetBackup 7.0? (Select two.)

A. Media

B. Image

C. Volume

D. EMM

E. Device

Answer: B,D

QUESTION NO: 18

.A Symantec NetBackup 7.0 environment uses a multi-tiered architecture.

Which system functions as the top tier?

A. media server

B. enterprise client

C. client

D. master server

Answer: D

QUESTION NO: 19

.A collection of all backup data from a client is assembled into a single stream and written to tape

or disk. What is this called?

A. file metadata

B. backup policy

C. catalog .f file

D. backup image

Answer: D

7


8/82

QUESTION NO: 20

.Which Symantec NetBackup 7.0 volume pool is created by default?

A. DataB. Scratch

C. None

D. Catalog

Answer: C

QUESTION NO: 21

.Which two types of storage will be used when a Symantec NetBackup 7.0 policy uses "Any

Available" for policy storage? (Select two.)

A. BasicDisk and AdvancedDisk storage units

B. Media Manager and NDMP storage units

C. storage units with the "On Demand Only" option disabled

D. storage unit groups

E. storage units with available media

Answer: C,E

QUESTION NO: 22

.Which two calculations are required to size the Symantec NetBackup 7.0 catalog for a new

installation? (Select two.)

A. divide number of files by retention period

B. multiply number of files per backup by number of backups per retention period

C. multiply number of backups per day by number of clients

D. multiply number of files by average length of file names

E. divide full backups by retention period

Answer: B,D

QUESTION NO: 23

8


9/82

.Which two components does OpsCenter Analytics replace? (Select two.)

A. backup reporter

B. open storage option

C. operations manager

D. shared storage option

E. Java console

Answer: A,C

QUESTION NO: 24

.Which component of Symantec NetBackup 7.0 includes Symantec NetBackup encryption?

A. master serverB. bare metal restore

C. client

D. EMM server

Answer: C

QUESTION NO: 25

.What is an accurate description of a Symantec NetBackup 7.0 domain?

A. all media servers and clients owned by multiple master servers

B. all clients owned by multiple master servers

C. all media servers and clients owned by one master server

D. all master and media servers on the same subnet

Answer: C

QUESTION NO: 26

.An organization has a library with ten drives on the Storage Area Network (SAN). The library can

be reached by all five media servers. Currently, two drives are assigned per media server. Which

option or agent can be used to allow each media server to use all drives on the SAN?

A. NetBackup Virtual Tape Option

B. Shared Storage Option

C. NetBackup OpenStorage

9


10/82

D. NetBackup SAN Media Server

Answer: B

QUESTION NO: 27

.An administrator is removing a media server from a Symantec NetBackup 7.0 environment.

Which two actions must be performed prior to shutting down the media server? (Select two.)

A. usebpmedia to migrate media from the old server to another media server

B. usebpmedia to expire the media server images from the older server

C. run a complete backup on the old media server

D. remove the storage unit reference to the media server

E. uninstall the media server software from the media server being removed

Answer: A,D

QUESTION NO: 28

.Which script moves client software to a remote UNIX client from a UNIX master server?

A. ftp_to_client

B. install_client_files

C. client_config

D. send_client_files

E. update_client

Answer: B

QUESTION NO: 29

.A company needs to push Symantec NetBackup 7.0 UNIX client installations.

Which two communication methods are supported on UNIX clients? (Select two.)

A. rsh

B. smb

C. nfs

D. ssh

E. http

Answer: A,D

10


11/82

QUESTION NO: 30

.A company has successfully installed Symantec NetBackup 7.0 for UNIX in a cluster. When the

first failover was completed, the connectivity to the robotic library was lost.

Which command should be run to ensure that the robotic control daemon is under cluster control?

A. bpconfig -ha

B. nbdevconfig -hvm

C. tpconfig -all_hosts

D. cluster_config -r

Answer: D

QUESTION NO: 31

.A company has decided to install Symantec NetBackup 7.0 in a cluster. What are two

prerequisites for this installation? (Select two.)

A. A virtual host name and IP address must be configured.

B. Two cross-over cables must be installed.

C. Replication must be installed.

D. The shared disk must be accessible to all nodes.

E. The installation DVD must be shared across all nodes.

Answer: A,D

QUESTION NO: 32

.Attempts to remotely install Symantec NetBackup 7.0 client software using the administrationconsole to a new UNIX client fail. Which action resolves this failure?

A. enabling Authorization Services on the SymantecNetBackup master server

B. adding the MASTER_SERVER= entry to the client'sbp.conf file

C. adding the master server and root in the .rhosts file in the root directory

D. enabling the Client Services on the SymantecNetBackup master server

Answer: C

QUESTION NO: 33

11


12/82

.What must be done to push install UNIX client software using the administration console from a

UNIX master server?

A. add the client hostname to the master server Host Properties -> Client Attributes

B. add the client hostname to the master server's server list

C. add the client hostname to an existing policy

D. add the client hostname to the media server host properties firewall section

Answer: C

QUESTION NO: 34

.What is required to install a Symantec NetBackup 7.0 media server?

A. a master server that is already installedB. an EMM server that is already installed

C. installed media devices (disk or tape)

D. a valid SymantecNetBackup license key

Answer: D

QUESTION NO: 35

.An administrator is installing Symantec NetBackup 7.0 and needs to use AdvancedDisk and

Media Server Deduplication. In Symantec NetBackup, what happens if the capacity-based

licenses for these features is exceeded?

A. The features will be unaffected and backups will continue to use these disk locations.

B. Restores will be allowed, however backups will fail to run.

C. The services for these features, such as theNetBackup Deduplication Engine, will stop running.

D. The storage lifecycle policies will be automatically deactivated.

Answer: A

QUESTION NO: 36

.Refer to the exhibit.

12


13/82

A Symantec NetBackup 7.0 environment has a master server named pc3train03 and a newly

installed media server named pc3train04. After installing the new media server, the administrator

decides to reboot the system. After the reboot, the Activity Monitor shows that many services are

stopped, as seen in the exhibit. The administrator needs to configure the newly attached hardware

on this media server. What should the administrator do next on the media server?

A. install an unexpired license key on the media serverB. configure the devices on the media server

C. run the SymantecNetBackup commands used to start all services

D. run a command to start just the NetBackup Enterprise Media Manager (nbemm)

Answer: B

QUESTION NO: 37

.What is done to prevent the Symantec NetBackup 7.0 administration console on a media server

from connecting to a master server?

A. uninstall the administration console from the media server

B. move the media server name from the server list to the media server list

C. add the media server name to the media server list and the master server list

D. remove the media server name from both server lists

Answer: B

13


14/82

QUESTION NO: 38

.In which two places is media sharing enabled? (Select two.)

A. in the server group configuration

B. in the volume group configuration

C. in the master server host propertiesD. in the volume pool configuration

E. in the media servers list

Answer: A,C

QUESTION NO: 39

.When using the NetBackup-Java console, which file needs to be edited to allow someone otherthan root or administrator to administrate the Symantec NetBackup 7.0 master server?

A. bp.conf

B. vm.conf

C. jnb.conf

D. auth.conf

Answer: D

QUESTION NO: 40

.What is required to perform remote administration or user operations using the NetBackup-Java

console?

A. a valid LDAP account

B. a valid account on the SymantecNetBackup server or client machine

C. a valid user in thebp.conf

D. a valid user on the SymantecNetBackup client machine

Answer: B

QUESTION NO: 41

.Which two Global Client Attributes can be over-ridden? (Select two.)

A. allow server file writes

B. allow client browse

14


15/82

C. general client attributes

D. allow client restores

E. client connect options

Answer: B,D

QUESTION NO: 42

.By default, how often does the Schedule Backup Attempt property cause Symantec NetBackup

7.0 to retry backups?

A. once in 8 hours

B. twice in 12 hours

C. once in 24 hours

D. twice in 24 hours

Answer: B

QUESTION NO: 43

.Which network setting converts the host name to an IP address if reverse host lookup fails?

A. allowed

B. prohibited

C. temporary

D. restricted

Answer: D

QUESTION NO: 44

.Which default Windows Open File Backup method is used during a backup for a newly installed

Symantec NetBackup 7.0 Windows 2003 client?

A. VERITAS Snapshot Provider (VSP)

B. Microsoft Volume Shadow Copy Service (VSS)

C. snapshot provider configured in Global Client Attribute

D. Advanced Open File Option (AOFO)

Answer: B

15


16/82

QUESTION NO: 45

.An administrator creates a storage lifecycle policy with the following configuration:

Use ForStorage UnitRetention Period

BackupAdvancedDisk12 weeks

DuplicationPureDisk11 month

DuplicationTLD_012341 year

Upon saving the policy the administrator receives an error.

Which setting should the administrator change to resolve the error?

A. change the default "Maximum number of jobs per client"

B. change the first retention period to 1 month

C. change the default "Maximum backup copies"

D. change the second storage unit to TLD tape

Answer: C

QUESTION NO: 46

.When changes have been made to devices, which service must be stopped and restarted on the

master server and all affected media servers?

A. bprd

B. ltid

C. bpdbm

D. vmd

Answer: B

QUESTION NO: 47

.If frequency-based cleaning of a drive is desired, which parameter must be set in the Symantec

NetBackup 7.0 administration console?

A. Cleaning Frequency (Between mounts)

B. Cleaning Frequency (In GB)

C. Cleaning Frequency (Between backups)

D. Cleaning Frequency (In hours)

Answer: D

16


17/82

QUESTION NO: 48

.A previously used volume has been inserted into a robot without a barcode reader.

Which Symantec NetBackup 7.0 administration console operation should be used to update the

slot number of the tape within the robot?

A. updateB. move

C. change

D. rescan

Answer: B

QUESTION NO: 49

.A tape library had the robot replaced and now the robot is reading the barcodes with additional

characters. Which rule can be established so that Symantec NetBackup 7.0 uses the original

characters?

A. MediaID generation

B. MediaID barcode

C. MediaID setup

D. MediaID creation

Answer: A

QUESTION NO: 50

.Cleaning media resides in which volume pool?

A. NetBackup

B. None

C. Scratch

D. Clean

Answer: B

QUESTION NO: 51

.Which command must be run to reset the cleaning statistics after manually cleaning the drive?

A. tpclean -m

17


18/82

B. tpclean -c

C. tpclean -L

D. tpclean -f

Answer: A

QUESTION NO: 52

.What is the maximum number of characters supported for a Media ID?

A. 6

B. 8

C. 10

D. 16

Answer: A

QUESTION NO: 53

.By default, new media is assigned to which volume pool during robot inventory without a

configured barcode rule?

A. NetBackup

B. Scratch

C. CatalogBackup

D. None

Answer: A

QUESTION NO: 54

.What does Media Manager do when a volume reaches maximum mounts?

A. suspend the tape

B. freeze the tape

C. expire the tape

D. return the tape to scratch pool

Answer: A

18


19/82

QUESTION NO: 55

.A company needs to update the volume configuration.

Which prerequisite must be met before proceeding?

A. The robotic library must contain media type HCART.

B. The Symantec NetBackup environment must consist of at least one Media ID generation rule.C. The robotic library must be TLD.

D. The robotic library must be configured with a robot type.

Answer: D

QUESTION NO: 56

.In addition to NetBackup and None, which two are default volume pools in Symantec NetBackup7.0? (Select two.)

A. Scratch

B. CatalogBackup

C. DataStore

D. Clean

E. Vault

Answer: B,C

QUESTION NO: 57

.How can new tapes be placed into a specific volume pool automatically using the robot inventory

utility?

A. write a script that reads the labels on the tapes and then uses the vmadd command to add

these tapes

B. make sure the tapes have barcode labels with a specific prefix and create an appropriate

barcode rule

C. configure the media type mappings to use a new default volume pool

D. use the Media and Device Configuration section of the administration console to add new

volumes

Answer: B

QUESTION NO: 58

19


20/82

.Which Symantec NetBackup 7.0 command can be used to move a tape volume to a different

volume pool?

A. vmupdate

B. bpmove

C. bpmedia

D. vmchange

Answer: D

QUESTION NO: 59

.A Symantec NetBackup 7.0 customer has a scratch pool named "scratch." The customer uses a

backup policy named XYZ to initiate daily backups of several client systems and uses a volume

pool named VOL99. When does Symantec NetBackup move a tape from the scratch pool to the

volume pool used by the XYZ backup policy?

A. when there are zero ACTIVE tapes with available space remaining in the VOL99 volume pool

and a new XYZ backup job is run

B. when the scratch pool is listed as the destination volume pool in the XYZ backup policy and a

new XYZ backup job is run

C. when there is only one ACTIVE tape left with any available space in the VOL99 volume pool

and a new XYZ backup job is runD. when there are five or fewer ACTIVE tapes in any volume pool and a new XYZ backup job is

run

Answer: A

QUESTION NO: 60

.A company has decided to automatically allocate all media to any volume pool on demand. Whichtwo steps must be performed to meet this requirement? (Select two.)

A. create volume pools as required, but do not add any volumes to the pools

B. if a scratch pool exists, delete it and assign the volumes to other pools

C. create barcode rules to automatically allocate volumes

D. define a scratch pool and add all of the volumes to it

E. delete all volume pools prior to adding media

Answer: A,D

20


21/82

QUESTION NO: 61

.To enable Symantec Netbackup 7.0 to manage allocation of volumes to volume pools, media

must be placed into which pool?

A. Scratch

B. NetBackupC. None

D. DataStore

Answer: A

QUESTION NO: 62

.A backup has allocated SQL001 for a SQL backup job from the scratch pool and has assignedthis tape to the NetBackup volume pool. The administrator now needs to move SQL001 to a

previously created volume pool called SQLTapes. How is this accomplished?

A. right-click SQL001 and select Change

B. expire SQL001, right-click SQL001 and select Change

C. right-click SQL001 and select Move

D. delete SQL001, right-click SQL001 and select Move

Answer: B

QUESTION NO: 63

.A request is made to change volume residences. Which two conditions must be met in the volume

group that is associated with the changes? (Select two.)

A. All volumes in a volume group must have the same residence.

B. All volumes must have barcode labels.

C. All volumes must be assigned to scratch pool.

D. All volumes must be vaulted before adding volumes to the group.

E. All volumes must have the same media type.

Answer: A,E

QUESTION NO: 64


The administrator is attempting to create a new volume pool called EmptyTapes for the

21


22/82

environment's scratch tapes.

Why is the Scratch Pool checkbox disabled?

A. A scratch pool already exists.

B. Tape media are nonexistent.

C. Volume groups are nonexistent.

D. The Symantec NetBackup temporary license key has expired.

Answer: A

QUESTION NO: 65

.Which command is used to configure tape drives and robotic devices in Symantec NetBackup

7.0?

A. tpautoconfig

B. tpconfig

C. tapeconfig

D. tldconfig

Answer: B

QUESTION NO: 66

.Which two functions can be performed with a tpconfig command in Symantec NetBackup 7.0?

(Select two.)

A. discover and display disk paths

B. add and configure robotic libraries

C. freeze / unfreeze tape volumes

D. display robot and tape drive configurationE. display and update storage units

Answer: B,D

QUESTION NO: 67

.What is the default media server SCSI reserve setting?

A. SCSI Persistent reserve

B. SPC-2 SCSI reserve

22


23/82

C. SPC-3 SCSI reserve

D. SPC-4 SCSI reserve

Answer: B

QUESTION NO: 68

.Which two have a media and/or density type? (Select two.)

A. barcodes

B. robots

C. volume pools

D. drives

E. storage units

Answer: D,E

QUESTION NO: 69

.In Symantec NetBackup 7.0 and Media Manager, which two configurations are allowed? (Select

two.)

A. media type = DLT, device = DLT, robot = TLD

B. media type = HCART, device = DLT, robot = TLD

C. media type = DLT2_CLN, device = DLT2, robot = TL8

D. media type = DLT2_CLN, device = DLT2, robot = TLD

E. media type = DLT4, device = DLT4, robot = TLD

Answer: A,D

QUESTION NO: 70

.Which action must be performed to add new media to a tape library?

A. compare contents with volume

B. update volume configuration

C. import media

D. move Volumes dialog box

Answer: B

23


24/82

QUESTION NO: 71

.A company purchased and installed a new robotic tape library controlled by Symantec NetBackup

7.0. This device has been configured in Symantec NetBackup and needs to be tested prior to

initiating any backups. Which command should be run to verify robotic library functionality?

A. nbdevqueryB. vmverify

C. libtest

D. robtest

Answer: D

QUESTION NO: 72

.An administrator has installed a new Symantec NetBackup 7.0 UNIX media server and has

attached two tape drives. How can the administrator verify that Symantec NetBackup can

configure the tape drives?

A. install the Symantec tape drivers

B. modify thevm.conf

C. list the contents of the /dev/rmt folder

D. use the "scan" command

Answer: D

QUESTION NO: 73

.Which action must the administrator perform to direct backups to tape drives using Symantec

NetBackup 7.0?

A. add new media into the scratch volume pool

B. delete this option

C. install Media Manager software on the master server

D. create and configure storage devices

E. install Media Manager software on the EMM server

Answer: B,D

QUESTION NO: 74

24


25/82

.Which two methods are used to set up disk spanning to allow backups to span multiple BasicDisk

storage units? (Select two.)

A. select Host Properties -> Media Servers -> Media -> Allow backups to span disks

B. select Storage Units -> Storage Unit -> Allow backup to span disks

C. configure a storage unit group and add all disk storage units regardless of media server

D. configure a storage unit group that consists only of disk storage units defined on a single media

server

E. confirm a Round Robin storage unit is selected at the group level

Answer: A,D

QUESTION NO: 75

.Symantec NetBackup 7.0 is configured with a disk storage unit that has staging enabled. Some of

the images in the disk storage unit have been successfully duplicated. The disk storage unit

becomes full. What occurs next?

A. The staging storage unit is skipped and backups are sent directly to the final storage unit.

B. Duplicated images are automatically purged until the low water mark has been reached.

C. Duplicated images are automatically purged until the high water mark has been reached.

D. Backups to the disk storage unitfails with a Status 129 because the storage unit is full.

Answer: B

QUESTION NO: 76

.A Prioritized storage unit group is configured with two BasicDisk storage units and one tape

storage unit that is configured with three DLT tape drives. What happens if a backup is running on

this storage unit group and one of the two BasicDisk storage units becomes full as the job is being

written to it?

A. The backup continues on another media server if "media server spanning" is enabled and a

storage unit is free.

B. The backup continues to a tape on the same media server.

C. The backup can continue on the other disk storage unit (if available) in the group if "disk

spanning" is enabled.

D. The backup fails because spanning is only allowed on tape storage units.

Answer: C

25


26/82

QUESTION NO: 77

.In Symantec NetBackup 7.0 there are currently three storage units (STU-A, STU-B, and STU-C).

Only STU-A is set as On Demand Only. Three policies have been created as follows:

PolicyA is set up to use storage unit STU-A.

PolicyB is set up as an "Any Available" storage unit.

PolicyC is set up to use STU-C.

If STU-B fills up, and STU-A and STU-C still have available space, what happens to future

backups for PolicyB?

A. Backups will use STU-A.

B. Backups will use STU-C.

C. Backups will remain queued waiting for available space on STU-B.

D. Backups will fail with an error message indicating that media is unavailable.

Answer: B

QUESTION NO: 78

.Five media servers are configured in a storage unit group and media server load balancing is

configured. There are 20 backups currently running from ten clients across the LAN. A new

backup is started. What is the first criteria Symantec NetBackup 7.0 uses to determine which

media server to use for the backup?

A. server rank, based on the Device Management Service

B. the media server that has themost blank tapes assigned

C. server rank, based on the media server performance

D. the media server that has the most free disk space

Answer: C

QUESTION NO: 79

.An administrator installs two new LTO4 drives in a tape library with two existing LTO3 tape drives.

What should the administrator configure next?

A. the two new LTO4 tape drives into an existing storage unit with the existing tape drives

B. a new storage unit for each tape drive

C. a new storage unit for the LTO4 tape drives

D. an existing storage unit because LTO4 is backwards compatible with LTO3

Answer: C

26


27/82

QUESTION NO: 80

.An administrator configures two standalone LTO4 tape drives on a Symantec NetBackup 7.0

media server with an existing tape library with an LTO4 drive. How should the administrator

configure the storage units?

A. place each standalone drive in its own storage unit

B. place the two standalone drives in a single new storage unit

C. place the two standalone drives in an existing storage unit with the other LTO4 drives

D. place the two standalone drives in a new storage unit group

Answer: B

QUESTION NO: 81

.An administer needs to limit the activity to a disk storage unit. Which setting modification should

the administrator implement?

A. increase the High Water Mark setting

B. decrease the Low Water Mark setting

C. decrease the Max Concurrent Job setting

D. decrease the Max Concurrent Write Drives setting

Answer: C

QUESTION NO: 82

.An administrator configures storage units STU-A and STU-B into a storage unit group in Failover

mode. If STU-A is busy, what does STU-B do?

A. queue remaining jobs and wait for STU-A to become available

B. write backups to tape if disk staging is enabled

C. fail over and write backups to STU-B

D. fail the job with a status code 219: Required storage unit is unavailable

Answer: A

QUESTION NO: 83

27


28/82

.An administrator configures STU-A with the "On Demand Only" option. When will backups write to

this storage unit?

A. when the Any Available storage unit is selected in the policy

B. when all other storage units are unavailable

C. when the policy specifies STU-A as an attribute

D. when the storage unit specified in the policy is full or unavailable

Answer: C

QUESTION NO: 84

.Which two are valid Media Manager storage unit types? (Select two.)

A. standalone tape driveB. NDMP devices

C. AdvancedDisk

D. Robot

E. BasicDisk

Answer: A,D

QUESTION NO: 85

.Two disk storage units, STU-A and STU-B, with default settings are configured. Two policies,

POL1 and POL2, are scheduled to start at the same time. POL1 uses STU-A and POL2 uses "Any

Available" storage unit. What is the status of the jobs initiated by POL1 and POL2?

A. POL1 job uses STU-A and POL2 job uses STU-B.

B. POL1 job uses STU-A and POL2 job queues until POL1 job completes.

C. Both POL1 and POL2 use STU-A only.D. POL1 job uses STU-A and POL2 job fails with error "Storage units are not available."

Answer: D

QUESTION NO: 86

.What is required to perform FlashBackup backups for UNIX clients?

A. specify the raw character device names as the Backup Selection

B. use the ALL_LOCAL_DRIVES directive as the Backup Selection

28


29/82

C. enable Multiple data streams in the policy attribute

D. enable Retain Snapshot for Instant Recovery in the policy attribute

Answer: A

QUESTION NO: 87

.What is the recommended policy type for configuring a Mac client?

A. Standard

B. MacOSX

C. Apple-Mac

D. NDMP

Answer: A

QUESTION NO: 88

.Which tab in the new policy dialog box allows an administrator to select a volume pool?

A. Attributes

B. Media

C. Volume

D. Pool

Answer: A

QUESTION NO: 89

.Which information is backed up by a cumulative incremental backup schedule?

A. files and folders that have changed since the last incremental backup

B. files and folders that have changed since the last full backup

C. only files that have changed since the last incremental backup

D. only folders that have changed since the last incremental backup

Answer: B

QUESTION NO: 90

29


30/82

.A Symantec NetBackup 7.0 administrator at an accounting company has assigned the following

default data classifications to the data that is being protected on a single disk storage unit. Type of

dataData Classification E-mailPlatinum Financial dataGold SalesSilver PersonnelBronze Disk

space is now limited and the administrator needs to ensure that financial data is preserved longer

than e-mail datA. What should the administrator do?

A. delete the Platinum data classification ID associated with e-mail data and re-define it for use

with financial data

B. temporarilysuspend the NetBackup scheduler, alter the Data Classification Names and

Description to reflect their new values, and resume the scheduler

C. manuallyduplicate the data again to the same disk storage unit using a lifecycle policy and set

the data classification value to Platinum

D. alter the rank for the Gold data classification to be higher than the rank of the Platinum data

classification

Answer: D

QUESTION NO: 91

.A Symantec NetBackup 7.0 administrator at a remote hospital needs to store secure copies of

protected data on tape media at an offsite location. What should the administrator do to

automatically eject tape media daily and create detailed reports?

A. configure a Vault policy and enable the Encryption attribute on the policy

B. use tape drives that support hardware encryption anduse a Vault policy to perform automated

ejects and create reports

C. use tape drives that support hardware encryption anduse a storage lifecycle policy to perform

automated ejects and create reports

D. configure a storage lifecycle policy to enable automatic ejects and create reports then enable

the Encryption attribute on the policy

Answer: B

QUESTION NO: 92

.A Symantec NetBackup 7.0 master server is backing up three clients over a slow WAN link to a

single tape drive with multiplexing set to 1 for the storage unit. The WAN link is prone to periodic

network interruptions outside of the administrator's control. What should the administrator do to

ensure that a backup of these clients can be completed successfully in the shortest time period?

A. enable the "Perform snapshot backups" attribute to ensure that the backups can be completed

30


31/82

B. enable the "Checkpoint" attribute on the policy to ensure the backups can be completed

C. choose the "Enable Granular Recovery" attribute so that the client splits the data into smaller

chunks before sending it to the storage unit

D. configure the bandwidth settings in host properties of the master server to allow the slow-

running backups to complete

Answer: B

QUESTION NO: 93

.An administrator needs to protect busy Microsoft Exchange server databases using a hardware

provider. The administrator needs to perform the backup without impacting the Microsoft

Exchange server CPU or disk resources. What should the administrator do to accomplish this?

A. enable the "Perform snapshot backup" policy attribute, choose thevxvm Snapshot method, and

select the "Perform off-host backup" attribute

B. enable the "Perform snapshot backup" policy attribute, choose the auto Snapshot method, and

select the "Perform off-host backup" attribute

C. enable the Master Server Property - Client Attribute "Enable Windows Open File Backups" to

use Microsoft Volume Shadow Copy Service (VSS)

D. enable the Master Server Property - Client Attribute "Enable Windows Open File Backups" to

use Veritas Snapshot Provider (VSP)

Answer: B

QUESTION NO: 94

.Some UNIX clients are being backed up using the policy type Standard using the directive

ALL_LOCAL_DRIVES. The amount of data being backed up per client in each backup session is

much larger than the data available on each client.

Which change should the administrator make to avoid the local server data from being backed up

repetitively?

A. disable the attribute "Cross mount points"

B. disable the attribute "Follow NFS"

C. add the following entry to the file list "UNSET_ALL"

D. disable the attribute "Collect true image restore information with move detection"

Answer: A

31


32/82

QUESTION NO: 95

.The Symantec NetBackup 7.0 master server has a Microsoft Windows policy that protects over

500 desktops and laptops at a given site using the directive ALL_LOCAL_DRIVES. The backup

window for this policy is between 3 p.m.-5 p.m. and is unshared with any other policy. When the

backup window for this policy is open, the overall performance of the disk storage unit gets

degraded. Which setting should the administrator modify to reduce the number of concurrent

streams writing to the disk storage unit to 10 during the backup window?

A. disable the "Enable Multiplexing" attribute for the storage unit

B. disable the "Enable multiple data streams" attribute to eliminate parent jobs from being created

C. enable multiplexing for the storage unit and set the value to 10

D. enable the "Limit Jobs per policy" attribute

Answer: D

QUESTION NO: 96


Which statement is true about the backup that runs for the policy shown in the exhibit?

A. The client will compress then encrypt the data, before sending it to the media server.

B. The client will encrypt then compress the data, before sending it to the media server.

C. The client will send the data to the media server, which will compress and then encrypt thedatA.

32


33/82

D. The client will send the data to the media server, which will encrypt and then compress thedatA.

Answer: A

QUESTION NO: 97


In the exhibit, the server_data policy is greyed out and marked with a red "X." What does this

indicate?

A. The policy is using aFlashBackup policy, but the Enterprise client is unlicensed.

B. The policy is using anAdvancedDisk storage unit, but the Flexible Disk option is unlicensed.

C. The policy's "go into effect" date is disabled or set to a date in the future.

D. A backup run from this policy recently failed and the status is in the Activity Monitor.

Answer: C

QUESTION NO: 98

.All Symantec NetBackup 7.0 media servers in an organization are part of a server group called

MEDIASRVGRP and are sharing tape drives. Symantec NetBackup clients are configured in

policies using "Any Available" for the "Policy storage" attribute. Which media sharing attribute

should the administrator specify so that the media server that writes the image to the media owns

the media?

A. Any

33


34/82

B. None

C. MEDIASRVGRP

D. All

Answer: B

QUESTION NO: 99

.Which policy attribute should the administrator configure to recover individual messages and

Public Folders databases from Microsoft Exchange server backups?

A. enable NetBackup File System (NBFS)

B. enable granular backups

C. enable granular recovery

D. enable Network File System (NFS)

Answer: C

QUESTION NO: 100

.An administrator needs to back up a server with a large file system that contains many files. On a

daily basis, very little data changes on this file system. Which approach minimizes the total backup

time for a given month?

A. run fullbackups monthly and differential incremental backups daily

B. run full backups weekly and differential incremental backups daily

C. run full backups monthly, cumulative incremental backups weekly, and differential incremental

backups daily

D. run full backups weekly and cumulative incremental backups daily

Answer: A

QUESTION NO: 101

.An administrator needs to configure a backup policy to run only on the 1st and 15th day of each

month. The Calendar Schedule tab is absent from the schedule window. How does the

administrator get the Calendar Schedule tab to display, so that the schedule can be configured for

specific days?

A. enable specific days using the bpplsched command line

B. enable specific days using the master server's host properties

34


35/82

C. configure a start window within the schedule

D. change the schedule type from Frequency to Calendar

Answer: D

QUESTION NO: 102

.The backup schedule for an application is unpredictable. Which backup type in Symantec

NetBackup 7.0 enables the client to run a backup when required without administrator

intervention?

A. user backup

B. manual backup

C. immediate backup

D. frequency-based backup

Answer: A

QUESTION NO: 103


The administrator is attempting to add a schedule for the backup policy. In this case "User

Backup" is missing from the drop-down list of schedule types.

What needs to be done to have "User Backup" appear under the Type of backup drop-down list?

A. change the backup policy type

35


36/82


37/82

An application backup is configured to run as frequency-based, once per week. The start window

is configured to run any time, day or night, 7 days per week. The application has a very complex

downtime and upgrade schedule in the coming months, as shown in the exclude dates in the

exhibit. If a successful automated backup ran on August 18th, when will Symantec NetBackup 7.0

run this backup?

A. August 19

B. August 29

C. September 3

D. October 13

Answer: B

QUESTION NO: 107

.An organization needs to automatically back up a server's data every other Sunday with a backup

start window from 7 p.m. to 10 p.m. It is expected that manual backups will never be run. How can

this backup be configured to ensure that the backup runs every other Sunday as accurately as

possible?

A. Schedule type:CalendarCalendar Schedule: Recurring Week Days: 1st and 3rd Sunday

B. Schedule type:CalendarCalendar Schedule: Recurring Week Days: 2nd and 4th Sunday

C. Schedule type: Frequency, once per 2 weeks

D. Schedule type: Frequency, once per 13 days

Answer: D

37


38/82

QUESTION NO: 108

.An organization has the following requirements for a server's backup data:

Two copies need to be retained for the same backup datA. One copy needs to be sent to disk with

a retention period of one month. A second copy needs to be sent to tape with a retention period of

six months. The copy on disk may only be automatically deleted by Symantec NetBackup 7.0 after

one month. Because of licensing, this must be configured avoiding using storage lifecycle policies.

How can a Symantec NetBackup 7.0 administrator configure a backup policy, maximizing

automation, to meet these requirements?

A. create a basic disk staging storage unit with a fixed retention of one month and staging to tape

with a retention of six months; configure the backup policy to use this disk

B. configure the backup policy to back up to a basic disk with retention of one month; run

thebpduplicate command to duplicate to tape with retention of six months

C. configure two identical schedules for the same policy, then configure one schedule to go to a

basic disk with retention of one month and configure the other schedule to go to tape with

retention of six months

D. configure the backup policy so that the schedule runs multiple backups: one to basic disk with

one month retention, and one to tape with six months retention

Answer: D

QUESTION NO: 109

.An administrator has created a schedule named "full" within a policy named "unixclients" for a

UNIX client. Where should the administrator create the exclude list for this policy?

A. /usr/openv/netbackup/exclude_list.full.unixclients

B. /usr/openv/netbackup/exclude_list.unixclients.full

C. /usr/openv/netbackup/client/exclude_list.full.unixclients

D. /usr/openv/netbackup/client/exclude_list.unixclients.full

Answer: B

QUESTION NO: 110


The UNIX client in the exhibit is backed up with a selections list that contains the

ALL_LOCAL_DRIVES directive. How many data streams are created for this backup?

A. one

B. two

38


39/82

C. three

D. four

Answer: C

QUESTION NO: 111

.The NEW_STREAMS directive is ignored unless which policy attribute is selected?

A. Allow multiple data streams

B. Take checkpoints every

C. Cross mount points

D. Limit jobs per policy

Answer: A

QUESTION NO: 112

.A UNIX client has the following mount points defined:

/var

/usr

/opt

/home

A backup policy for this client has "Allow multiple data streams" enabled and contains a backup

selections list with the ALL_LOCAL_DRIVES directive. It also contains an EXCLUDE list that

excludes /home. What happens when this backup policy runs?

A. The backup completes successfully.

B. Backup jobs are created for all mount points except for /home.

C. The backup job for /home is partially successful because /home is excluded.

D. The backup job for /home fails because /home is excluded.

Answer: D

QUESTION NO: 113

.Which backup selections list backs up all .doc files and all .pdf files on a UNIX client?

A. [*.doc,*.pdf]B. {*.doc,*.pdf}

C. *.doc,*.pdf

39


40/82


41/82

.Which storage unit types are supported with synthetic backup?

A. Disk and NDMP storage units only

B. Disk and Media Manager storage units only

C. Media Manager and NDMP storage units only

D. Media Manager storage units

Answer: B

QUESTION NO: 118

.AdvancedDisk storage units are unable to span which type of backup targets?

A. a different volume in the disk pool

B. a volume with a different file systemC. from one disk pool to another

D. from one disk array to another

Answer: C

QUESTION NO: 119

.How can new volumes be added to an existing AdvancedDisk storage pool with minimal impact

on the environment?

A. run the Configure Disk Pool Wizard to modify the existing pool

B. right-click the disk pool and select Change and then select Add Volumes

C. create a disk pool for the new volumes and merge it with the existing pool

D. right-click the disk pool and select Extend to add the new volumes

Answer: C

QUESTION NO: 120

.What must be done to remove an AdvancedDisk pool from a media server?

A. remove the disk volumes one at a time

B. remove storage units and expire images that target the disk pool

C. clear the high and low water marks

D. expire the credentials from the storage server

Answer: B

41


42/82

QUESTION NO: 121

.Multiple data streams are configured and there is a policy with four items in the backup selections

list. Storage units with multiple tape drives are set up to "allow multiple concurrent write drives."

Only one job is going active at a time. What must be set to a value greater than 1 to allow all four

streams to go active concurrently?

A. the master server "Maximum jobs per client" host property

B. the master server "Maximum backup copies" host property

C. the storage unit "Maximum streams per drive" attribute

D. the tape drive "Media multiplexing" property

Answer: A

QUESTION NO: 122

.An administrator configures a Symantec NetBackup 7.0 environment where there is only one tape

drive available. The storage unit multiplex setting is 5. The schedule multiplex setting is 3. Six

backup jobs initiate from that schedule. Given this configuration, how many backup streams will be

multiplexed?

A. 1

B. 3

C. 5

D. 15

Answer: B

QUESTION NO: 123

.Consider the following configuration information for a single client:

Allow Multiple Data Streams is enabled.

ALL_LOCAL_DRIVES is specified.

Media multiplexing is set to 6.

Three tape drives are available in the storage unit and multiplex per drive is 2.

Max Jobs per Client is set to 8.

The client has five local file systems with no exclude list.

How many backups will be active (versus queued) after the policy is successfully invoked?

A. two

42


43/82

B. three

C. five

D. six

E. eight

Answer: C

QUESTION NO: 124

.The administrators in a company consider Application Data backup as the most critical backup.

They use storage lifecycle policies and data classifications to differentiate data types. All backups

are performed to the same disk pool and are relocated to tapes.

Consider the following configuration:

Data TypeData ClassificationRetention------------------------------------------------------

ApplicationData Platinum1 year

UNIX ClientsSliver and Bronze1 year

Windows ClientsNo Classification1 year

Which backup images are deleted first when the disk becomes full?

A. application backups

B. UNIX client backups

C. Windows client backups

D. all backups that have been staged

Answer: C

QUESTION NO: 125


43


44/82

During the course of operation, the administrator notices that initial backup jobs are failingbecause the disk storage is full. How could this issue have been avoided?

A. by setting the duplication retentions to one week

B. by setting the backup retention to expire immediately after the duplication job

C. by selecting the 'Expire ImagesBefore Full' checkbox for the Disk Storage Unit

D. by using another Tape Storage Unit for duplications

Answer: B

QUESTION NO: 126

.What are two ways to include files for scheduled backups? (Select two.)

A. specify files to back up using Data Classifications

B. use storage lifecycle policies to specify files to back up

C. specify files to be backed up in the policy backup selections

D. use Client Properties -> Windows client -> Exclude list Exceptions

E. specify files using the Backup, Archive, and Restore interface

Answer: C,D

QUESTION NO: 127

.In addition to a full backup, which two are requirements for a synthetic backup? (Select two.)

A. user backup

B. incremental backup

44


45/82

C. multiplexing

D. multistreaming

E. TIR with move detection

Answer: B,E

QUESTION NO: 128

.In which two processes does Symantec NetBackup 7.0 rehydrate deduplicated data? (Select

two.)

A. Optimized duplication

B. Duplicate copy to tape

C. Restore to anOpenStorage device

D. Replicated copy

E. Restore to a client

Answer: B,E

QUESTION NO: 129

.An administrator is asked to back up client data at several remote sites with limited network

connectivity. Which deduplication technology should the administrator select to meet these

requirements?

A. media server sidededuplication

B. NetBackup PureDisk deduplication

C. OpenStorage device deduplication

D. NetBackup WAN deduplication

Answer: B

QUESTION NO: 130

.What are two benefits of client-side deduplication? (Select two.)

A. reduces network bandwidth

B. reduces backup window

C. reduces production dataD. reduces CPU use

E. reduces memory use

45


46/82

Answer: A,B

QUESTION NO: 131


Which process does the image in the exhibit depict?

A. PureDisk server deduplication

B. client-sidededuplication

C. OpenStorage deduplication

D. media serverdeduplication

Answer: D

QUESTION NO: 132

.What is the correct order in which to configure deduplication storage in Symantec Netbackup 7.0?

A. Disk Pool, Storage Server, Storage Unit

B. Storage Server, Storage Unit, Disk Pool

C. Storage Unit, Storage Server, Disk PoolD. Storage Server, Disk Pool, Storage Unit

46


47/82

Answer: D

QUESTION NO: 133

.Where in the Symantec NetBackup 7.0 administration console is client-side deduplication

enabled?

A. Master Server Host Properties, Global Attributes

B. Media Server Host Properties, Servers

C. Master Server Host Properties, Client Attributes

D. Media Server Host Properties,Deduplication Attributes

Answer: C

QUESTION NO: 134


According to the job details log in the exhibit, how much data was stored after deduplication?

A. 8762 KB

B. 9466 KB

C. 109533 KB

D. 118999 KB

Answer: C

47


48/82

QUESTION NO: 135

.What is the replication process of a backup image from one deduplication pool to another called?

A. deduplication replicationB. media serverdeduplication

C. optimized duplication

D. storage lifecycle policy

Answer: C

QUESTION NO: 136

.Which process does a load balanced media server provide to aid in deduplication?

A. encrypting data

B. fingerprint hashing

C. deduplication storage

D. client communications

Answer: B

QUESTION NO: 137

.Which two recovery methods are available using the NetBackup Catalog Recovery Wizard in the

administration console? (Select two.)

A. recovering the entire catalog

B. recovering NBDB

C. recovering the image database

D. recovering the catalog image and configuration files

E. recovering the ASA relational database

Answer: A,D

QUESTION NO: 138

.An administrator is configuring a catalog backup policy without using a scratch pool.

Which volume pool includes information about whether there are sufficient tapes?

48


49/82

A. Catalog

B. CatalogBackup

C. NetBackup

D. None

Answer: B

QUESTION NO: 139

.Due to a problem with restores, a support call is opened. The support representative asks that

backups for a specific client be located to determine the last time that the client had a backup. The

administration console is unavailable. Which other location can be checked to determine whether

the client has had a backup?

A. the image database

B. the EMM database

C. the client database

D. the media database

Answer: A

QUESTION NO: 140

.The Symantec Netbackup 7.0 master server has had an unrecoverable catastrophe. The

administrator rebuilt another server with the same hostname and attached all the necessary

hardware. The administrator has reinstalled Symantec NetBackup. Which step should be taken

next in recovering the master server?

A. mount the catalog backup media

B. run the Catalog Recovery Wizard

C. configure devicesD. inventory the tape library

Answer: C

QUESTION NO: 141

.What are two ways to recover an entire Symantec NetBackup 7.0 catalog? (Select two.)

A. use the Catalog Recovery Wizard

B. usebprestore -wizard

49


50/82

C. use the Backup, Archive, and Restore interface

D. usebprecover -wizard

E. usebprecover -nbdb

Answer: A,D

QUESTION NO: 142

.The administrator of a large bank needs to preserve financial information for an extended period

of time. The bank's Symantec NetBackup 7.0 catalog is now over 800 GB in size causing the

catalog backups to contend for resources with production system backups.

What should the administrator do to shorten the time taken to back up the Symantec NetBackup

catalog?

A. use the SymantecNetBackup 7.0 Agent for Symantec Enterprise Vault to perform an online

archive of the Symantec NetBackup Catalog

B. create a catalog archive policy and execute it from the command line using the catarc

command

C. use the SymantecNetBackup 7.0 client-side deduplication feature to shorten the time it takes to

perform an Symantec NetBackup Catalog Backup

D. back up the SymantecNetBackup catalog by scheduling an online Sybase database backup

policy to allow the Catalog Backup to run without contending for resources with the production

system backups

Answer: B

QUESTION NO: 143

.Which two attributes must be configured for a Symantec NetBackup 7.0 catalog backup policy?

(Select two.)

A. volume pool

B. software compression

C. policy type

D. encryption

E. multiple data streams

Answer: A,C

QUESTION NO: 144

50


51/82

.Which version of NetBackup client (at a minimum) is required to use Symantec NetBackup

LiveUpdate?

A. 6.0 GA

B. 6.0 MP4

C. 6.5 GA

D. 7.0 GA

Answer: C

QUESTION NO: 145

.How are release updates installed on the master server using LiveUpdate?

A. right-click theLiveUpdate policy type in Policies and choose UpdateB. run the nbliveup command on the master server

C. right-click the master and select Scan for updates

D. download the patch files from liveupdate.symantec.com

Answer: B

QUESTION NO: 146

.On which system(s) is the Symantec NetBackup 7.0 LiveUpdate agent installed by default?

A. master server only

B. master server and media server only

C. master server, media server, and client

D. media server and client only

Answer: C

QUESTION NO: 147

.Which two communication methods can be used for Symantec NetBackup 7.0 LiveUpdate?

(Select two.)

A. SSH/RSH

B. CIFS/NFS

C. FTP/SFTP

D. HTTP/HTTPS

51


52/82

E. TFTP

Answer: B,D

QUESTION NO: 148

.A company deployed Symantec NetBackup 7.0 LiveUpdate on a Windows LiveUpdate file share.

None of the clients are receiving updates from the file server. What is a possible explanation of

this problem?

A. LiveUpdate can only be run from a web server.

B. The file share must have "NULL" permissions.

C. LiveUpdate must be run on a UNIX server.

D. The file share must be located on the boot drive.

Answer: B

QUESTION NO: 149

.What is required to update clustered systems using Symantec NetBackup 7.0 LiveUpdate?

A. OneLiveUpdate policy must be created per Symantec NetBackup domain.

B. Unlimited jobs must be used per policy.

C. All cluster node names must be entered in theLiveUpdate policy.

D. All virtual node names must be entered in theLiveUpdate policy.

Answer: C

QUESTION NO: 150

.An administrator must recover an expired image from a tape volume where only one remaining

copy exists and there are other unexpired images on the volume. Which action should the

administrator perform?

A. run the Tape Contents report

B. import the volume

C. duplicate the volume

D. inventory the media then run verify

Answer: B

52


53/82

QUESTION NO: 151

.Which two statements are true about duplication in Symantec NetBackup 7.0? (Select two.)

A. Duplications may be performed without usingNetBackup Vault.

B. In any multiple media server environment, the source and destination media must reside on the

same media server.C. An entire tape is copied block by block from source to destination.

D. Unexpired images can be duplicated from source to destination.

E. Due to formatting concerns, tape drives used in the duplication must be of the same media

type.

Answer: A,D

QUESTION NO: 152

.Which statement is true about re-using space on a tape that has a FULL status and that contains

both expired and unexpired backups?

A. SymantecNetBackup 7.0 can re-use any area of the media that contains expired datA.

B. All remaining images on the media must expire, or be manually expired, before space on the

media can be used again.

C. If the first image on the media becomes expired, SymantecNetBackup 7.0 can write up until the

first block of unexpired datA.

D. There must be at least one expired backup on the media and it must be the only available

media in the pool.

Answer: B

QUESTION NO: 153

.An administrator is duplicating a multiplexed backup image that exists on tape. In the Setup

Duplication Variables dialog box, the administrator selects all copies to go to Disk storage units

and also selects the Preserve Multiplexing option. What are the results of the duplication?

A. Multiplexed duplicate images are created on disk.

B. Non-multiplexed duplicate images are created on disk.

C. An error code is returned indicating that the duplications failed.

D. An error code is returned indicating a media mismatch.

Answer: B

53


54/82

QUESTION NO: 154

.Which section in the Symantec NetBackup 7.0 administration console provides visibility into the

backup image database?

A. Media

B. CatalogC. Activity Monitor

D. Host Properties

Answer: B

QUESTION NO: 155

.An administrator is asked to create a duplicate copy from tape to tape. The environment includesa single tape drive and a BasicDisk storage unit. Which method of duplication should the

administrator use?

A. true image duplication

B. storage lifecycle policy

C. manual duplication

D. optimized duplication

Answer: C

QUESTION NO: 156

.An administrator attempts to use the Backup, Archive, and Restore interface to restore the

server's datA. Upon selecting the client name and policy type, the administrator notices that

restore points are unavailable. The backup jobs have been completed successfully. What should

the administrator do first to troubleshoot this issue?

A. verify the tape media is available in the tape library

B. verify the backup image has yet to expire

C. verify the restore policy is enabled

D. verify the date and time are set correctly on the media server

Answer: B

QUESTION NO: 157

54


55/82

.When multiple copies are made concurrently, a parent job appears in the activity monitor, plus a

job for each copy. By default, what is the final job status for the parent job, if one of the copy jobs

fails but the others are successful?

A. successful

B. failed

C. partially successful

D. completed with exceptions

Answer: A

QUESTION NO: 158

.After changing a failed, shared tape drive, which command should be run to update the Symantec

NetBackup 7.0 device configuration?

A. tpautoconf -replace_drive

B. tpext -replace_drive

C. tpconfig -add -drive

D. tpext -add -drive

Answer: A

QUESTION NO: 159

.A tape drive under robotic control is available to Symantec NetBackup 7.0. An administrator

needs to make it unavailable for maintenance, without affecting other drives in the tape library.

How should the administrator make the tape drive temporarily unavailable for backups, using the

administration console?

A. in the Device Monitor, right-click the drive and selectDown DriveB. under Devices -> Media Servers, right-click the media server and select Deactivate

C. under Devices -> Drives, right-click the drive and select Deactivate

D. select the appropriate storage unit and reduce the "Maximum concurrent write drives" setting by

1

Answer: A

QUESTION NO: 160

.An administrator is checking the status of a standalone drive in the Device Monitor. The Control

column status is AVR and the Ready column status is No. What does this indicate?

55


56/82

A. The drive is down.

B. The drive is up and under operator control.

C. The drive is up and it is empty.

D. The drive is up, but the tape in the drive is busy.

Answer: C

QUESTION NO: 161

.An administrator is having difficulty determining the status of a drive and wants to manually load a

tape into the drive. Which command should the administrator use to accomplish this?

A. bpmedia

B. robtest

C. vmoprcmd

D. vmcheckxxx

Answer: B

QUESTION NO: 162

.The Symantec NetBackup 7.0 operations staff suspects that there is a problem with the robot

showing all of the media they just added. However, the list of tapes displayed in the administration

console is incomplete. What should be done to troubleshoot this problem?

A. run the vmphyinv command to physically inventory the robot

B. stop and restart the bprd and bptm services/processes on the media servers

C. perform a number of test backups to see if any of the new tapes are being used

D. run the tape contents report to see if any of the tapes have been written to

Answer: A

QUESTION NO: 163

.Two Symantec NetBackup 7.0 master servers, PROD1 and PROD2 use similar barcode-enabled

tape libraries and all media have eight digit bar codes. PROD1 uses default media ID generation

and PROD2 uses six digit customized media ID generation (#T:#

A. inventory media on the media server in the PROD1 environmentB. create a new media ID generation rule in the PROD1 environment

C. add the volume manually using the media ID in the PROD2 environment

56


57/82

D. add a new barcode rule in the PROD2 environment

Answer: C

QUESTION NO: 164

.Which cleaning method should be used when robotic-automatic cleaning is unsupported?

A. library-based cleaning

B. TapeAlert cleaning

C. frequency-based cleaning

D. calendar-based cleaning

Answer: C

QUESTION NO: 165

.Two tapes with Media IDs TP501L and TP502L exist in a Symantec NetBackup 7.0 environment.

Media ID TP501L was originally allocated to the SERVERS volume pool and Media ID TP502L

was allocated to the SCRATCH volume pool. A policy is configured to use the SERVERS volume

pool. The policy runs and media ID TP501L is allocated for use. All images on media ID TP501L

have now expired. Media ID TP501L will be allocated to which volume pool?

A. SCRATCH

B. None

C. NetBackup

D. SERVERS

Answer: D

QUESTION NO: 166

.A BasicDisk storage unit is 500 GB and is running out of space. The disk and file system is

resized to 800 GB. What needs to be done to take advantage of this new disk space?

A. Backups need to be sent to theBasicDisk storage unit.

B. Thenbdevquery command needs to be run to refresh the disk inventory.

C. The NetBackup Disk Manager (bpdm) process needs to be restarted.

D. The Apply button in the BasicDisk storage unit configuration window needs to be selected.

Answer: A

57


58/82

QUESTION NO: 167


Two media servers, each with one standalone tape drive, exist in the Symantec NetBackup 7.0

environment shown in the exhibit. Both weekly full and daily differential incremental backups need

to run for the clients and each schedule has a different retention period. Because of network

topology, some clients back up to media server 1 and some back up to media server 2. How can

the administrator accomplish this task while minimizing the number of times that tapes will need to

be manually changed?

A. enable "Enable unrestricted media sharing for all media servers" in the master server's host

properties

B. enable "Allow multiple retentions" in the media servers' host propertiesC. enable "Allow multiple retentions" in the master server's host properties

D. enable "Enable unrestricted media sharing" in the media servers' host properties

Answer: B

QUESTION NO: 168

.An organization needs to have backups span between different BasicDisk storage units. The"Allow backups to span disk" setting has been enabled in the host properties. What else needs to

be done to allow backups to span disks? (Select two.)

A. enable the "Enable standalone drive extension" setting in host properties

B. put theBasicDisk storage units in a Round Robin storage unit group

C. put theBasicDisk storage units in a Prioritized storage unit group

D. create a disk pool with all the appropriate disk volumes

E. configure the media server as a storage server

Answer: B,C

QUESTION NO: 169

.An administrator connects remotely via terminal console to change the status of a mediA.

Which command should be used to accomplish this task?

A. bpimmedia

B. bpsetmedia

C. bpmedia

58


59/82

D. nbemmcmd

Answer: C

QUESTION NO: 170


A backup is about to run, which is being sent to the "servers" volume pool, with a retention level of

1. The following host properties have also been enabled: allow multiple retentions per media allow

backups to span tape media allow media overwrite: ANSI, CPIO, DBR Which other tape would

Symantec NetBackup 7.0 use for the backup, if tape T00306 becomes unavailable?

A. T00301

B. T00303

C. T00305

D. T00308

E. T00309

Answer: C

QUESTION NO: 171


59


60/82

How can tape T00304 be made available for additional backups to the "servers" volume pool?

A. use thebpmedia command to change its status

B. change the tape's volume pool to the scratch pool

C. use thebpexpdate command to expire all images on the tape

D. enable the "Enable multiple retentions per media" setting in host properties

Answer: A

QUESTION NO: 172


How can tape T00307 be made available for additional backups going to the "servers" volume

pool?

A. enable the "Allow backups to span tape media" setting in host properties

B. use thebpexpdate command to expire all images on the tape

C. change the tape's volume pool to the scratch pool

D. use a retention level of 1 for the backups

Answer: B

QUESTION NO: 173

60


61/82

.An administator has a tape that has been previously used by Symantec NetBackup 7.0 for client

backups, but no longer contains valid datA. The barcode has been changed, and the tape has

been moved to a different Symantec NetBackup domain. What must be done to use this tape in

the new Symantec NetBackup domain?

A. move the tape to the scratch volume pool

B. relabel the tape

C. expire the media

D. re-inventory the robot library

Answer: B

QUESTION NO: 174

.Each morning, the administrator of a large and complex Symantec NetBackup 7.0 environment

checks the results of all tape-based backups that took place the previous night. Which report

should be run to review the overall backup information for a given timeframe?

A. Tape Logs

B. Client Backups

C. Status of Backups

D. Tape Summary

Answer: C

QUESTION NO: 175

.Which command provides a list of disk pools required for restoring a client?

A. nbdevquery

B. bpimagelistC. vmquery

D. bpdiskinfo

Answer: B

QUESTION NO: 176

.The new IT Manager requests a detailed list of all media servers, which includes informationabout which tape libraries are attached to them and which media is currently installed in each tape

library. Which command should an administrator use to obtain this information?

61


62/82

A. ncss (NetBackup Consolidated Support Script)

B. ndmp (NetBackup Detail Management Program)

C. nbmss (NetBackup Master Support Script)

D. nbsu (NetBackup Support Utility)

Answer: D

QUESTION NO: 177

.Which report identifies volumes that were used for backups within a specified time period?

A. Tape Written

B. Tape Summary

C. Tape Logs

D. Tape Contents

Answer: A

QUESTION NO: 178

.Which report shows how many volumes are at each retention level?

A. Tape Summary

B. Tape Logs

C. Tape Contents

D. Tape List

Answer: A

QUESTION NO: 179

.An administrator reviews backup jobs from the previous evening and notices a media error. In

addition, the jobs appear to be running slower than usual. Which two reports will help the

administrator identify the media errors and the transfer rate? (Select two.)

A. Tape Logs

B. Tape Written

C. Images on Tape

D. Status of BackupsE. All Log Entries

62


63/82

Answer: A,E

QUESTION NO: 180

.An administrator needs to use OpsCenter to email reports and publish them under My Reports.

How can this be accomplished?

A. add the reports to Scheduled Reports

B. add the reports to Report Templates

C. add the reports under My Dashboard

D. add the reports to Managed Folders

Answer: C

QUESTION NO: 181

.Which Symantec NetBackup 7.0 report provides the number of active, full, suspended, and frozen

volumes on a given server?

A. Tape List

B. Media List

C. Tape Summary

D. Media Contents

Answer: C

QUESTION NO: 182

.Which operation can be performed against all active and queued jobs when using the Activity

Monitor from the administration console?

A. cancel all jobs

B. suspend all jobs

C. checkpoint all jobs

D. delete all jobs

Answer: A

QUESTION NO: 183

63


64/82

.On UNIX clients, the busy-file processing feature allows which two actions when an busy file is

encountered during a backup? (Select two.)

A. send an email notification

B. abort the backup job

C. retry the backup job

D. retry the backup of the busy file

E. take a snapshot of the file

Answer: A,D

QUESTION NO: 184

.For which two use cases is it appropriate to run manual backups? (Select two.)

A. to back up a client before an upgrade

B. to force a queued job to run immediately

C. to troubleshoot job errors

D. to span jobs across multiple media

E. to consolidaterestore points

Answer: A,C

QUESTION NO: 185

.Which two utilities can be used to view and monitor all running Symantec NetBackup 7.0 jobs?

(Select two.)

A. Activity Monitor

B. OpsCenter

C. Job TrackerD. MMC Snap-in

E. Backup, Archive, and Restore interface

Answer: A,B

QUESTION NO: 186

.The NetBackup Resource Broker (NBRB) maintains resource requests for jobs that are queued.Which two criteria does NBRB use to evaluate the resource requests and provide resources to

each job sequentially? (Select two.)

64


65/82

A. job priority

B. date of last successful backup

C. data classification rank ID

D. time when NBRB receives the request

E. available network bandwidth

Answer: A,D

QUESTION NO: 187


An administrator must create a new backup policy for a critical application. The administrator

needs to ensure the backup job is assigned the first available resource and the backup images on

disk are retained as long as possible. How should the new policy be configured?

A. Data Classification set to Platinum and Priority set to 101

B. Data Classification set to Silver and Storage set to "any"

C. Data Classification set to Gold and Priority set to 999D. Data Classification set to Platinum and Policy Type set to Critical

Answer: A

QUESTION NO: 188

.A Symantec NetBackup 7.0 master server is actively processing backups on two tape drives as

follows:Job Detail

Job 1 - Priority=10, multiplexing=2


65


66/82






Jobs 1, 2 and 3 are actively writing to tape and jobs 4, 5, 6 and 7 are queued awaiting resources.

Job 2 has just finished writing. Which queued job will go active next?

A. 4

B. 5

C. 6

D. 7

Answer: B

QUESTION NO: 189

.Media server A has performed a backup of a client. An administrator needs to perform a restore

of data to the client immediately and media server A is currently busy performing backups. Media

server B has access to the same tape library and is available.

One way to allow media server B to restore the client's data is by enabling media sharing,

however the administrator is unable to enable this feature without first consulting the team lead,

who is unavailable. How can the restore for the client be accommodated as soon as possible?

A. add the client to the "Alternate client restore" list in the host properties, to be available for

alternate server restores

B. add media server B to the "Alternate server restore" list in the host properties, as a restore

server

C. add media server B to the "Media host override" list in the host properties, as a restore server

D. update the job priority on the restore to be higher priority than the backups running and run the

restore job

Answer: C

QUESTION NO: 190

.File data from ClientA has been backed up and the data needs to be restored to a file system on

ClientB. Assuming that the media server has Media Server Only privileges, on which two

machines can the restore be initiated? (Select two.)

A. master server

66


67/82

B. OpsCenter server

C. media server

D. ClientA

E. ClientB

Answer: A,D

QUESTION NO: 191

.An administrator needs to ensure that a restore job is initiated at 3 A.m. tomorrow morning. The

administrator will leave the data center tonight at 9 p.m. and will only have access to the system

after 6 A.m. tomorrow morning.

What should the administrator do to initiate the job at 3 A.m.?

A. use the "Go into effect at" setting on the restore job to start the job at3 A.m.

B. schedule a task to automatically start a bprestore command at 3 A.m.

C. initiate and then suspend the restore job, then select "resume at" and select "in 6 hours"

D. create a restore policy that goes active at 3 A.m.

Answer: B

QUESTION NO: 192


An administrator needs to restore an individual file that was accidentally deleted from a server.

When selecting the backup images for a restore, the folders listed in the left-pane window are

greyed out. When selecting one of these folders, the list of files on the right-pane window is empty

even though files have been backed up from this folder in the past.

What can the administrator do to restore individual files in the Backup, Archive, and Restore

interface?

A. The administrator needs to login to a system, such as the masterserver, that has permissions to

run the restore job.

B. The media with the data needs to be placed into the tape

250-270-administration of symantec netbackup 7.0 for unix

Documents