26 - 29 septiembre. acapulco, 2018 acapulco,...

26 - 29 septiembre. Acapulco, 2018Acapulco, September 26th-29th, 2018


The Mexican Association of Petroleum Geologists (AMGP), the Mexican Association of Exploration Geophysicists (AMGE), the Association of Petroleum Engineers of Mexico (AIPM), the College of Petroleum Engineers of Mexico (CIPM) and the Society of Petroleum Engineers (SPE) - Mexico Section, invite all professionals who work for the oil industry to submit technical or research work to the Technical Program of the Mexican Petroleum Congress 2018, under the following.

BASESI. Place, date and timeThe technical program will be held in the facilities of the Expo Mundo Imperial in the city of Acapulco, Guerrero, on September 27-29, 2018 from 9:00 a.m. to 6:00 p.m.

II. Categories and SubjectsThe works should contribute to the progress of the Oil Industry and be related to the following topics:

CATEGORY SUBJECT

Geosciences Geomatics applied to the exploration and production of hydrocarbonsGeophysics: Design, acquisition, processing and interpretation of data

Geotectonic and Geological-Structural Modeling applied to Exploration and Production

Stratigraphy and Sedimentology of Rocks Storage, seal and generators of hydrocarbon

Geochemistry and Basin Modeling - Oil Systems

Modeling and Evaluation of Conventional and Non-Conventional PlaysPetrophysics and Geological Characterization of Conventional and Non-Conventional FieldsDesign and Geological Control of Exploratory Well Drilling and Development

Reservoirs Numerical Simulation of Conventional and Non-Conventional Reservoirs

Naturally Fractured Reservoirs

Secondary Recovery of Hydrocarbons

Improved Recovery of Hydrocarbons

Technical and Economic Evaluation of Hydrocarbon Reserves


Phase Behavior and Characterization of Fluids in Reservoir Conditions (PVT)

Measurement Technologies and Evaluation of Formation Pressure Testing

Fluid Flow in Porous Media

Production Data Analysis

Monitoring and Control of Conventional and Non-Conventional ReservoirsDevelopment and Exploitation of Heavy-Oil and Ultra Heavy-Oil Reservoirs

Development and Exploitation of Reservoirs in Deep-Waters

Laboratory Studies of Physical and Chemical Properties of Rocks and Reservoir Fluids

Development and Optimization of Exploitation

Mature Oil Fields

Marginal Oil Fields

New Oil Fields: Conventional and Non-Conventional

Hydrocarbon Production and commercialization Systems - Hydrocarbon Production Facilities

Artificial Hydrocarbon Production Systems

Measurement of Hydrocarbons

Hydrocarbon Transport Networks

Processes of Production and Commercialization of Hydrocarbons

Optimization of Hydrocarbon Production and Distribution

Automation of the Production and Distribution of Hydrocarbons

Flow Assurance of Hydrocarbon Production


Mixing and Improvement of Hydrocarbon Production Flow

Well Intervention Drilling of Exploratory Wells and Under Balance Development

Drilling of Horizontal and Vertical Wells

Well Completion

Geomechanics and Well Stability

Drilling Fluids

Well Repair

Technologies for Control and Evaluation of the Well Drilling and Completion Process

Industrial Safety, Hygiene and Environmental Protection

Industrial Security Applied to the Exploration and Production of Hydrocarbons

Health at Work Applied to the Exploration and Production of Hydrocarbons

Environmental Protection Applied to the Exploration and Production of Hydrocarbons

Sustainable Development of the Exploration and Production of Hydrocarbons

Management and Business Human Resources - Personnel Development and Oil Business Culture

Oil Exploration and Production Business Processes

Project Management of Oil Exploration and Production

Oil Management Systems and Alliances and Partnerships Operation

Risk and Uncertainty of Oil Exploration and Production Businesses

International Practices for the Regulation of Oil Exploration and Production

Information Technology Information Systems Applied to the Exploration and Production of Hydrocarbons

Hydrocarbons Exploration and Production Databases


III. Deliverable Full article at a maximum of 20 pages.

IV. Characteristics 1. The manuscripts may be in Spanish or English.2. They must be sent to the Technical Program Committee of the Congress with a maximum length of 20 pages, including tables, graphs, figures, photographs, etc., which must be placed in the corresponding place and sent in TIFF or JPG format with a 300 dpi minimum quality.3. They should be written in a column with 3 cm margins on the left side and 2 cm margins on the remaining sides. The interlinear spacing should be 1.5, with 12 point Arial font for the text and 14 point for titles, using the corresponding orthographic accents in capital letters. The word processor must be Microsoft Word.4. The heading of the article should integrate the following information:

• Work identifier (CMP2017_XXX, leave like this and if approved, a number will be assigned)• Title of the work: it should be short and concise, without exceeding 15 words (the first in capital letters and the others in lowercase)• Information about the main author and co-authors: full name, and in parentheses name of the institution or company to which they belong

5. The structure of the article should contain:• Summary• Introduction• Topics and subtopics• Tables• Graphics• Conclusions• Nomenclatures (if applicable)• Special thanks• Annexes (if applicable)• References• Professional career of the author and co-authors

6. The summary should not exceed 250 words.7. The development of the Subject should contain: inputs used, methodology, results and discussion of results.8. Mathematical expressions should be written clearly, taking care that the symbols are legible and using the International System of Units. 9. The references listed in the development of the works should be noted indicating the author’s last name and the year of its publication. For example:“Recently, García (1996)...”, or, “In a recent work (García, 1996)...”For three or more authors: García et al. (1996). These references will be quoted at the end of the text and in alphabetical order according to the manual established by the Publication Style Guide (SPE) that are exemplified below.

Books:Bourdet, D. 2002. Well Test Analysis: The Use of Advanced Interpretation Models. Amsterdam: Elsevier.


Articles:Hernández García, M.A. 2011. Desarrollo del Campo Cauchy: Caso de Éxito en la Región Norte. Ingeniería Petrolera LII (2): 19-35.Soliman, M.Y., Miranda, C. and Wang, H.M. 2010. Application of After-Closure Analysis to a Dual-Porosity Formation, to CBM, and to a Fractured Horizontal Well. SPE Prod & Oper 25 (4): 472-483. SPE-124135-PA.http://dx.doi.org/10.2118/10.2118/124135-PA

Conference, meeting, etc.:Al-Khalifa, A.J. and Odeh, A.S. 1989. Well Test Analysis in Oil Reservoirs with Gas Caps and/or Water Aquifers. SPE Article 19842, featured in: SPE Annual Technical Conference and Exhibition, San Antonio, Texas, October 8-11. http://dx.doi.org/10.2118/19842-MS.

Thesis:Pérez Martínez, E. 2011. Estudio de Conificación de Agua en Yacimientos Naturalmente Fracturados. Master’s Thesis, UNAM, Master’s and Doctoral Program in Engineering, Mexico City.Miguel Hernández, N. 2002. Scaling Parameters for Characterizing Gravity Drainage in Naturally Fractured Reservoir. PhD dissertation, University of Texas at Austin, Austin, Texas.

PDF (online):Secretaría de Energía. Dirección de Planeación Energética. 2011. Balance Nacional de Energía 2010. http://www.sener.gob.mx/res/PE_y_DT/pub/2011/Balance%20Nacional%20de%20Energía%202010_2.pdf (descargado el 1 de febrero de 2010)

Guidelines:NRF-005-PEMEX-2000. Protección Interior de Ductos con Inhibidores. 2000. Mexico City PEMEX, Comité de Normalización de Petróleos Mexicanos y Organismos Subsidiarios.

Software:Eclipse Reservoir Engineering Software. 2005. Schlumberger,http://www.slb.com/content/services/software/resent/.10. The professional career of the author and co-authors should not exceed 100 words each in the language in which the article was written, these will be located after the references.11. The attached sample format should be used.12. The digital file should be named as follows:Nameofauthor_lastnames.docExample: juan_perezsanchez.docIf several jobs:juan_perezsanchez1.docjuan_perezsanchez2.docjuan_perezsanchez3.doc


V. Reception of Works1. The deadline for receipt of articles: May 28, 2018.1. The works must be sent through the website: http://www.ecodsa.com.mx/Registro/CargatrabajoCMP.aspx2. Only works that meet the specified requirements for the full article will be accepted.3.- The article must be accompanied by a Responsive Letter from the Author(s) about the data, information used and/or the corresponding permission to use the data-information of third parties.VI. Works Evaluation and Acceptance1. The deadline for acceptance notice of approved works: June 8, 2018.2. All submitted articles will be previously evaluated by two or more members of the Technical Expert Evaluators Group formed for the Mexican Petroleum Congress 2018, who will study its content and will rate and make observations about its publication. In this process, recognized and high-level specialists will participate in the different areas of expertise, with the ability and experience to reliably evaluate both the quality and originality, as well as the merit of the content of the articles received.

26 - 29 septiembre. acapulco, 2018 acapulco,...

Documents