26088-00 0403 preface - crarymanuals.crary.com/manuals/cws/26086-00_r0403.pdf · mentioned...

Catalog 26086-00Rev. 04/03

Conmapion to 26085-00

Crary CompanyA Division of TerraMarc Industries

237 12th St. NW • P.O. Box 849West Fargo, ND 58078-0849

(701)282-5520 • FAX: (701)282-9522www.crary.com

��

��

� ��

www.terramarc.com

I CWS Parts Catalog

�

Copyright© 2003, Crary Company, All rights reserved. Produced and printed in the USA.

PrefaceThis Parts Catalog is intended for use with the Crary Wind System (CWS) for Gleaner and Massey Ferguson headers.

��

Address Hours Telephone / Fax

Num berE-m ail

Int ernet

Crary Com pany Mon. - Fr i. Fo r Par t s and Service: Fo r Service: [email protected] 12t h St . NW 8 A.M. t o 5:00 P.M. 1-800-247-7335 Fo r Par t s: [email protected]. Box 849 Cent ral Tim e Fax: 1-701-282-9522 Visit us on t he Web @West Fargo , ND 58078-0849 w w w .crary.com

IICWS Parts Catalog

�� !��!��

�� !��!��All references to left, right, front and rear of the machine, asmentioned throughout the parts catalog, are determined bystanding behind the machine and facing towards the directionof forward travel.

Fig # 1 Serial number location

! ��!�� "� ��#�The arrangement of this parts catalog is for easy identificationof CWS parts for Gleaner and Massey Ferguson headers.All parts are illustrated in either assembled or exploded views.All illustrations are located on the left hand page with theassociated parts information (text) on the right. The textpages list the reference number, part number, part descriptionand the amount required.

��"��!� � ��Parts for your CWS may be ordered from your local authorizeddealer. Please remember that the Crary Company, or yourlocal dealer will need to know the identification numbers ofyour CWS to give you the most efficient service. Pleasesee the following on how to identify and record theidentification numbers for your CWS.

Please be sure to provide the following information:

1. The SERIAL NUMBER of your CWS.

2. The PART NUMBER of the part.

3. The PART DESCRIPTION.

4. The QUANTITY needed.

��!� � � ��$��Please write the serial number of your CWS in the spaceprovided below. You can find the location of these numbersby referring to the following illustrations.

Serial Number: _______________________

WARNINGPlace all controls in neutral or off, stop combineengine, set parking brake, remove ignition key, setcylinder stops, wait for all moving parts to stop, beforeobtaining serial number, servicing, adjusting, repairing,or unplugging.

MANIFOLD, CWS

DECAL, CWS LOGO

DECAL,

SERIAL NUMBER

Fig # 2 Serial number decal

YXXXXX

III CWS Parts Catalog

Description PageContents

GEARBOX MOUNT DRIVE KIT ....................................................................................................................................... 3RH DRIVE KIT 15FT ........................................................................................................................................................ 5RH DRIVE KIT 16-18FT ................................................................................................................................................... 5RH DRIVE KIT 20-24FT ................................................................................................................................................... 7RH DRIVE KIT 25FT ........................................................................................................................................................ 7RH DRIVE KIT 30 FT ....................................................................................................................................................... 9GEARBOX / FAN .......................................................................................................................................................... 11GEARBOX (REPLACEMENT PARTS) ........................................................................................................................... 13FAN HOSE ASSEMBLY ............................................................................................................................................... 15SWITCH MOUNT PLATE............................................................................................................................................... 1524033 DRIVELINE ......................................................................................................................................................... 1724034 DRIVELINE ......................................................................................................................................................... 17REEL ARM MOUNT ...................................................................................................................................................... 19MANIFOLD ................................................................................................................................................................... 21DROP TUBE KIT ........................................................................................................................................................... 21

Gleaner CWS Parts Catalog

CWS

��

��

��


GLEANER CWSGEARBOX MOUNT DRIVE KIT

PART # 22676 GEARBOX MOUNT / DRIVE KIT

1

2

3

4

5

6

7

8

9


GLEANER CWSGEARBOX MOUNT DRIVE KIT

PART # 22676 GEARBOX MOUNT / DRIVE KIT

ITEM PART NUMBER DESCRIPTION QTY1 12457 BUSHING, 1-3/8" SD 22 15012 BOLT, 1/2" X 1" HEX HD 43 15013 BOLT, 1/2" X 1-1/4" HEX HD 124 15049 NUT, 1/2" CENTERLOCK GRB ZP 45 15097 WASHER, 1/2" SAE FLAT 166 15498 KEY, 5/16" X 1-3/4" SQUARE 27 22634 MOUNT PLATE SUPPORT (DAC) 18 22635 GEARBOX MOUNT PLATE (AC GLEANER) 29 22696 WELDMENT, SHIELD 2

10 22676 ADAPTER, -10MORING/-8MJIC 45" 2

GEARBOX MOUNT/DRIVE KIT (22676)


1

2

3

4

5

6

7

8

9

10

11

12

13

GLEANER CWSRIGHT HAND DRIVE KIT

KIT # 22690 RH DRIVE KIT DAC 15 FT


KIT # 24060 RH DRIVE KIT DAC 16-18 FT

1

2

3

4

5

6

7





KIT # 24060 RH DRIVE KIT DAC 16-18 FT

ITEM PART NUMBER DESCRIPTION QTY1 15016 BOLT, 1/2" X 3-1/2" HEX HD 12 15049 NUT, 1/2" CENTERLOCK GRB ZP 13 15130 SCREW, 5/16" X 5/8" SET 14 20008 MAIN COUPLER 15 21240 SHIELD, DRIVE SHAFT 16 21912 SPLINE COUPLER 17 22705 SHAFT WELDMENT 52" 1

RIGHT HAND DRIVE SHAFT KIT D/A (22690)

ITEM PART NUMBER DESCRIPTION QTY1 15003 BOLT, 5/16" X 3/4" HEX HD 32 15006 BOLT, 3/8" X 1" HEX HD 23 15013 BOLT, 1/2" X 1-1/4" HEX HD 34 15031 WASHER, 3/8" FLAT 25 15042 NUT, 3/8" HEX 26 15097 WASHER, 1/2" SAE FLAT 37 15250 WASHER, 5/16" FLAT 38 15498 KEY, 5/16" X 1-3/4" SQUARE 19 24033 DRIVELINE/C FLANGE ASSEMBLY 1

10 24036 SHAFT, GEARBOX DRIVE 111 24037-12 SHIELD, SLIP CLUTCH 112 24039 ASSEMBLY, SHIELD MOUNT PLATE 113 24669-12 BRACKET, DRIVELINE SUPPORT (GLEANER) 1

RIGHT HAND DRIVE KIT - DAC (16/18 FT)


1

2

34

6

7

8

9

10

11

12

1314

16

155

1

2

3

45

6

7

8

9

10

11

12

13

GLEANER CWSRIGHT HAND DRIVE KIT DAC 20-24 FT

KIT # 24061 RH DRIVE KIT




GLEANER CWSRIGHT HAND DRIVE KIT DAC 20-24 FT

KIT # 24061 RH DRIVE KIT



ITEM PART NUMBER DESCRIPTION QTY1 15003 BOLT, 5/16" X 3/4" HEX HD 32 15006 BOLT, 3/8" X 1" HEX HD 23 15013 BOLT, 1/2" X 1-1/4" HEX HD 34 15031 WASHER, 3/8" FLAT 25 15042 NUT, 3/8" HEX 26 15097 WASHER, 1/2" SAE FLAT 37 15250 WASHER, 5/16" FLAT 38 15498 KEY, 5/16" X 1-3/4" SQ 19 24034 DRIVELINE/C ASSEMBLY - L 1

10 24036 SHAFT, GEARBOX DRIVE 111 24037-12 SHIELD, SLIP CLUTCH 112 24039 ASSEMBLY, SHIELD MOUNT PLATE 113 24669-12 BRACKET, DRIVELINE SUPPORT (GLEANER) 1

RIGHT HAND DRIVE KIT - DAC (20 - 24 FT.)

ITEM PART NUMBER DESCRIPTION QTY1 15003 BOLT, 5/16" X 3/4" HEX HD 32 15006 BOLT, 3/8" X 1" HEX HD 53 15031 WASHER, 3/8" FLAT 74 15051 NUT, 3/8" SERRATED FLANGE 75 15057 BOLT, 3/8" X 1" CARRIAGE GR5 NC ZP 26 15250 WASHER, 5/16" FLAT 37 15498 KEY, 5/16" X 1-3/4" SQUARE 18 17059 BEARING, 1-3/8" ROUND BORE 19 17060 FLANGETTE, 72MS 1-3/8" 2

10 26051-12 BEARING MOUNT 111 23141 SHIELD, DRIVESHAFT - 36" 112 24033 DRIVELINE/C ASSEMBLY - s 113 24037-12 SHIELD, SLIP CLUTCH 114 24039 ASSEMBLY, SHIELD MOUNT PLATE 115 24669-12 BRACKET, DRIVELINE SUPPORT (GLEANER) 116 26052-00 SHAFT, GEARBOX DRIVE 1

RIGHT HAND DRIVE KIT - 24106




1

2

3 4

6

7

8

9

15

10

11

1213

16

14

5




ITEM PART NUMBER DESCRIPTION QTY1 15003 BOLT, 5/16" X 3/4" HEX HD 32 15006 BOLT, 3/8" X 1" HEX HD 53 15031 WASHER, 3/8" FLAT 74 15051 NUT, 3/8" SERRATED FLANGE 75 15057 BOLT, 3/8" X 1" CARRIAGE GR5 NC ZP 26 15250 WASHER, 5/16" FLAT 37 15498 KEY, 5/16" X 1-3/4" SQUARE 18 17059 BEARING, 1-3/8" ROUND BORE 19 17060 FLANGETTE, 72MS 1-3/8" 2

10 21241 SHIELD, DRIVE SHAFT 111 24033 DRIVELINE/C FLANGE ASSEMBLY - S 112 24037-12 SHIELD, SLIP CLUTCH 113 24039 ASSEMBLY, SHIELD MOUNT PLATE 114 24669-12 BRACKET, DRIVELINE SUPPORT (GLEANER) 115 26051-12 BRACKET, BEARING MOUNT 116 26053-00 SHAFT, GEARBOX DRIVE (GLEANER/MF) 1

RIGHT HAND DRIVE KIT - DAC 30 FT (24062)


GLEANER CWSGEARBOX / FAN

PART # 22757 GEARBOX/FAN ASSY 7.269:1

18

23

37

1

2

3

4

5

6

6

7

8

9

10

1111

13

14

15

16

17

17

18

19

20

2021

22

24

24

25

26

27

27

28

30

29

24

31

32

33

3435

36

38

38

39

40

41

42

12

43 38

39


GLEANER CWSGEARBOX / FAN

PART # 22757 GEARBOX/FAN ASSY 7.269:1

ITEM # PART # DESCRIPTION QTY

1 22323 GEARBOX, FAR DA 7.269:1 1

2 21445 HUB/MOTOR MOUNT PLATE (8 IN.-B PILOT) 1

3 15014 BOLT, 1/2 X 1-1/2 HEX HD 4

4 15049 NUT, 1/2" CENTER LOCK 4

5 21193 CASTING, 8" FANRH W/ BUTTERFLY 1

6 15076 BOLT, 3/8 X 1 THREAD CUT 8

7 15099 WASHER, 7/8 SAE FLAT 2

8 14056-00 FAN ROTOR, 16.5" X 3 CW, 7/8, STL. 1


10 15055 NUT, 3/4" NF CASTLE 1

11 15068 PIN, 5/32 X 1-1/4 COTTER 2

12 21194 CASTING, 8" FANLH W/ BUTTERFLY 1

13 15364 BOLT, 3/8 X 1-1/4 HEX HD 12

14 15051 NUT, 3/8 SERR FLANGE 12

15 22655 BASE 1

16 23152 WELDMENT,BASE STRAP 1

17 16449 BEARING, 5/8" 2-BOLT FLNG. 2

18 15238 BOLT, 1/4 X 3/4" CRG 4

19 23161 WELDMENT, SCREEN/BLADE 1


21 23155 WELDMENT,PIVOT 1

22 23158 WELDMENT,SCREEN CLEANER 1

23 23163 WELDMENT,SCREEN CAP 1

24 15053 NUT, 1/4 SERR FLANGE 8

25 24656-12 PLATE, HOSE PROTECTION 1

26 15012 BOLT, 1/2X 1 HEX HD 2

27 12507 FITTING, HYD 2

28 12509 FITTING, 6-8MALE HOSE BARB 2

29 24658 HOSE, GEARBOX CHECK/FILL 1

30 12511 CLAMP, SAE 6/8 BAND HOSE 2

31 15001 BOLT, 1/4 X 3/4 HEX HD 4

32 15095 SCREW, NO.14 X 1/2" TAPPING HWH ZP 6

33 7022 KEYSTOCK, 3/16" 1

34 25644-12 WELDMENT, ACTUATOR MOUNT 1

35 25641-12 WELDMENT, VALVE ACTUATOR 1

36 25638-35 WELDMENT, INDICATOR 1

37 21444 LARGE BUTTERFLY PLATE 1

38 15582 BOLT, #10-24 X 1 IN. GR5 HCPS 3

39 15397 NUT,#10 X 24 NYLOCK 3

40 13460-00 ACTUATOR, 2" STROKE WARNER 1

41 15342 BOLT, 1/4 X 1-1/2 HCS G5 ZP 2

42 15087 NUT, 1/4" CENTERLOCK 243 25592-12 WRAP, ROTARY SCREEN 1


CWSGEARBOX (REPLACEMENT PARTS)


CWSGEARBOX (REPLACEMENT PARTS)

ITEM PART NUMBER DESCRIPTION QTY

16125GEARBOX SEAL AND SHIM KIT (CONSISTS OF ITEMS # 1 THRU. # 11)

1

1 NPN 66 SHIM, .002 RED 42 NPN 66 SHIM, .005 BLUE 43 NPN SPEC SHIM, .002 RED 44 NPN SPEC SHIM, .005 BLUE 45 NPN SPEC SHIM, .002 RED 46 NPN SPEC SHIM, .005 BLUE 47 16625 SEAL, 472681 OR EQ. 18 16624 SEAL, 32395 OR EQ. 29 NPN O-RING, -044 1

10 NPN O-RING, -158 211 NPN O-RING, -138 212 16814 RETAINING RING 5160-118 OR EQUIV. 1

13 16817 CUP, BEARING 27620 OR EQUIV. (IDLER SHAFT) 2

14 16818CONE, BEARING LM67048 OR EQUIV. (IDLER SHAFT)

2

15 16820 SPEC SHAFT, OUTPUT 116 16821 SPEC SLEEVE, INPUT 1

17 16815BEARING, BALL 206NPP OR EQUIV. (OUTPUT SHAFT)

2

18 16816CUP, BEARING LM67010 OR EQUIV. (IDLER SHAFT)

2

16819CONE, BEARING 27687 OR EQUIV. (INPUT SHAFT)

2

16621GEARBOX GEAR KIT (9.375 : 1) (CONSISTS OF ITEMS # 20 THRU. # 23)

1

16622GEARBOX GEAR KIT (8.831 : 1) (CONSISTS OF ITEMS # 20 THRU. # 23)

1

20 NPN66 GEAR, SP BEV RH 29T (USED FOR BOTH 16621 & 16622)

1

21 1680766 GEAR, SP BEV LH 19T (USED FOR BOTH 16621 & 16622)

1

NPNSPEC GEAR, INTG HEL LH 14T (USED FOR 16621)

1

NPNSPEC GEAR, INTG HEL LH 14T (USED FOR 16622)

1

NPN SPEC GEAR, HEL RH 86T (USED FOR 16621) 1NPN SPEC GEAR, HEL RH 81T (USED FOR 16622) 1

GEARBOX REPLACEMENT PARTS

23

22

19


GLEANER CWSFAN HOSE ASSEMBLY

FAN HOSE ASSEMBLY

17

1

34

6

5

1

2 13

4

3

4

5

1

2 (SWITCH ONLY)

CWSSWITCH MOUNT PLATE

SWITCH MOUNT PLATE ASSEMBLY


GLEANER CWSFAN HOSE ASSEMBLY

FAN HOSE ASSEMBLY

CWSSWITCH MOUNT PLATE

SWITCH MOUNT PLATE ASSEMBLY

ITEM PART NUMBER DESCRIPTION QTY1 12167 DECAL, ACTUATOR SWITCH 12 13901 SWITCH, ELECTRIC 3P COL 23 17849 ELECTRIC SWITCH ASSY - SPLIT 6 AMP 14 17850 ELECTRIC SWITCH ASSY-SPLIT 15 AMP 15 24332-12 PLATE, SWITCH MOUNT 1

NOT SHOWN 15002 BOLT, 1/4" X 1" HEX CAPSCREW GR5 ZP 2NOT SHOWN 15053 NUT, 1/4-20 SERRATED FLANGE NC ZP 2NOT SHOWN 17320 STRAP, NYLON TIE - 11" 10NOT SHOWN 24369 STRIP, VELCRO HOOK, 1" X 2-3/4" 2NOT SHOWN 24370 STRIP, VELCRO LOOP, 1" X 2-3/4" 2

SWITCH MOUNT PLATE - 24333

ITEM # PART # DESCRIPTION QTY

1 16092 T-BOLT CLAMP 8-11/16" 4

2 12146 ELBOW, RUBBER-8" X 45 DEG. 1

22664 FLEX HOSE SUPPORT BAND ASSY 1

3 21512 ELBOW SUPPORT BAND (INCLUDED IN 22664) 2

4 16091 T-BOLT CLAMP 8-1/4" (INCLUDED IN 22664) 2

5 17777 8" FLEX HOSE X 8' LG (INCLUDED IN 22664) 1

6 22806 FLEX HOSE CHAIN ASSY 1

7 17437 MANIFOLD ELBOW - 8" (MR) 1


GLEANER CWSDRIVELINE

P/N 24034 DRIVELINE C-FLANGE ASSY

GLEANER CWS DRIVELINE


5 1

3

6

4

2

1

2

3

4

5

6






ITEM PART NUMBER DESCRIPTION QTYN/S 14061-00 SPRING, BELVILLE (WALTERSCHEID)N/S 14062-00 SET, FRICTION DISC (WALTERSCHEID)N/S 0883-0120-00 KIT, CROSS & BEARING W-2400

WALTERSCHEID SERVICE PARTS

ITEM PART NUMBER DESCRIPTION QTYN/S 14061-00 SPRING, BELVILLE (WALTERSCHEID)N/S 14062-00 SET, FRICTION DISC (WALTERSCHEID)N/S 0883-0120-00 KIT, CROSS & BEARING W-2400

WALTERSCHEID SERVICE PARTS

ITEM PART NUMBER DESCRIPTION QTY1 13914-00 COUNTER FLANGE 12 15070 SCREW, 3/8" X 1" SQ HD SET 13 15219 BOLT, 5/16" X 1" HEX HD 64 15256 SCREW, 3/8" X 3/4" SQ HD SET 15 15356 NUT, 5/16" NYLOCK 66 16934 HEADER DRIVELINE W/CLUTCH (S) 1

DRIVELINE W/FLANGE ASSEMBLY (P/N 24033)

ITEM PART NUMBER DESCRIPTION QTY1 13914-00 COUNTER FLANGE 12 15070 SCREW, 3/8" X 1" SQ HD SET 13 15219 BOLT, 5/16" X 1" HEX HD 64 15256 SCREW, 3/8" X 3/4" SQ HD SET 15 15356 NUT, 5/16" NYLOCK 66 16935 DRIVELINE, HEADER - L W/CLUTCH 1

DRIVELINE/C FLANGE ASSEMBLY 24034


GLEANER CWSREEL ARM MOUNT 15

72

10

13

5

6

16

12

4

11

1

7

9 1

3

8

3

7 15

10

2

1

14

5

6

16

12

4

11

1

7

Right Hand Side

Left Hand Side


GLEANER) CWSREEL ARM MOUNT

ITEM PART NUMBER DESCRIPTION QTY1 15049 NUT, 1/2" CENTERLOCK GRB ZP 102 15057 BOLT, 3/8" X 1" CARRIAGE GR5 NC ZP 83 15092 BOLT, 1/2" X 2-1/2" GR5 HEX CAP ZP 24 15097 WASHER, 1/2" SAE FLAT ZP 65 15173 BOLT, 1/2" X 3 1/4" HCS GR5 ZP 66 15272 BOLT, 3/8" X 4" HHCS GR5 NC ZP 47 15388 NUT, 3/8" NE NYLOCK ZP 128 17843 ELECTRIC ACTUATOR 19 22479 ASSEMBLY, PIVOT CLAMP 1

10 22489 ASSEMBLY, BRACE CLAMP 211 25815-12 STRAP, ADJUSTMENT 212 25834-12 TUBE, ARM MOUNT (CIH,GLEANER) 213 25906-00 ASSY., LH-JD, RH-CIH/GLEANER REEL MT.(CWS) 114 25907-00 ASSY., LH REEL MT.(CIH,GLEANER-CWS) 115 25908-00 ASSEMBLY, HALF CLAMP 216 25974-12 PLATE, REEL ARM MT. (GLEANER) 4

REEL ARM MOUNT KIT GLEANER CWS (25994)


5

3

14

2

4

2

CWSMANIFOLD

CWSDROP TUBE KIT

1

2

3

4


CWSMANIFOLD

CWSDROP TUBE KIT

15FT MANIFOLD

12" SPACING

16FT MANIFOLD

12" SPACING

18 FT MANIFOLD

12" SPACING

18 FT MANIFOLD

13-5/16" SPACING

20 FT MANIFOLD

12" SPACING

20 FT MANIFOLD

13-5/16" SPACING

22 FT MANIFOLD

12" SPACING

22 FT MANIFOLD

13-5/16" SPACING

25 FT MANIFOLD

12" SPACING

25 FT MANIFOLD

13-5/16" SPACING

30 FT MANIFOLD

12" SPACING

30 FT MANIFOLD

13-5/16" SPACING

ITEM PART # DESCRIPTION QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY

1 14077-00 DECAL, CWS LOGO 1 1 1 1 1 1 1 1 1 1 1 1

2 16091 T-BOLT CLAMP 8-1/4" 2 2 2 2 2 2 2 2 2 2 2 2

3 16155 DECAL, SERIAL NUMBER 1 1 1 1 1 1 1 1 1 1 1 1

4 21924 TUBE CAP-8" (NOTCHED) 2 2 2 2 2 2 2 2 2 2 2 2

25876-00 MANIFOLD, 16FT. CWS (12") 1

25879-00 MANIFOLD, 18FT. CWS (12") 1

25893-00 MANIFOLD, 18FT. CWS (13-5/16") 1

25880-00 MANIFOLD, 20FT. CWS (12") 1

25894-00 MANIFOLD, 20FT. CWS (13-5/16") 1

25881-00 MANIFOLD, 22FT. CWS (12") 1

25895-00 MANIFOLD, 22FT. CWS (13-5/16") 1

25883-00 MANIFOLD, 25FT. CWS (12") 1

25897-00 MANIFOLD, 25FT. CWS (13-5/16") 1

25885-00 MANIFOLD, 30FT. CWS (12") 1

25899-00 MANIFOLD, 30FT. CWS (13-5/16") 1

MANIFOLD

5

MANIFOLD LENGTH# OF SHORT

DROP TUBES# OF LONG

DROP TUBES15FT (12" SPACING) 7 716FT (12" SPACING) 6 718FT (12" SPACING 7 818FT (13-5/16" SPACING) 8 820FT (12" SPACING) 9 1020FT (13-5/16" SPACING) 9 922FT (12" SPACING) 9 1022FT (13-5/16" SPACING) 10 1025FT (12" SPACING) 12 1325FT (13-5/16" SPACING) 11 1230FT (12" SPACING) 14 1530FT (13-5/16" SPACING) 13 14

Complete CWS manifold length to drop tube chart. All possible models shown.

LONG DROP TUBE KIT (25920) SHORT DROP TUBE KIT (25919)ITEM PART NUMBER DESCRIPTION QTY QTY

1 15351 NUT, 5/16 SERR FLNG NC ZP 2 22 15416 WASHER,5/16"SAE FLT ZP 2 23 15700-00 U-BOLT,5/16-18 X 8.19 X 6.59 1 1

25832-00 WELDMENT, LONG AIR TUBE 125831-00 WELDMENT, SHORT AIR TUBE 1

5 17313-00 FOAM SEAL - AIR TUBE 1 1

DROP TUBE KIT

4


CWS (OPTIONS)GEARBOX/FAN EXTENSION


CWS (OPTIONS)GEARBOX/FAN EXTENSION

ITEM PART NUMBER DESCRIPTION QTY1 24643 ASSY., EXTENSION SHAFT/HUB 12 15014 BOLT 1/2" X 1-1/2" GR5 HEX CAPSW ZP 4

12 15012 BOLT 1/2" X 1" GR5 HEX CPSCREW ZP 24 15097 WASHER 1/2" SAE FLAT ZP (56PC/LB) 4

14 15049 NUT 1/2 CENTER LOCKNUT ZP 46 24510-12 PLATE, BEARING RETAINER 17 24638-12 BRACKET, EXTENSION SUPPORT 17 24639-12 BRACKET, EXTENSION SUPPORT 18 24640-12 BRACKET, EXTENSION SUPPORT 19 24641-12 BRACKET, EXTENSION SUPPORT 1

10 13014 U-BOLT, FAN MOUNT 3/8 X 3" X 4" ZP 111 15006 BOLT 3/8 X 1 GR5 HEX CAPSCREW ZP 212 15031 WASHER, 3/8" FLAT ZP (67PCS/LB) 213 15042 NUT 3/8 HEX NUT NC ZP 4

GEARBOX/FAN EXTENSION (24493)


Manual Improvement Program

If you have a suggestion on how to improve this manual, send it to us. Participants whose ideas areimplemented will receive a free pair of Crary genuine leather gloves.

Send your suggestions to:Crary CompanyC/O Technical Writer237 NW 12th St. Box 849West Fargo, ND 78078

Suggestions:

Name:Address:Phone Number:Email (if applicable):Product purchased:Manual part number:

Manufactured in theUnited States of America

by Crary Company

Crary CompanyA Division of TerraMarc Industries

237 12th St. NW • P.O. Box 849West Fargo, ND 58078-0849

(701)282-5520 • FAX: (701)282-9522www.crary.com

www.terramarc.com

Manual Improvement Program

If you have a suggestion on how to improve this manual, send it to us. Participants whose ideas areimplemented will receive a free pair of Crary genuine leather gloves. The form is located after thetorque chart in the manual.

26088-00 0403 preface - crarymanuals.crary.com/manuals/cws/26086-00_r0403.pdf · mentioned...

Documents