parts manual - crarymanuals.crary.com/manuals/cws/29776-00_r072507.pdf · parts manual manual pn...

cRARY WIND SYSTEMPARTS MANUAL

Manual PN 29776-00R072507Companion to 29775-00

LExIoN F25, F30,

F535 MAx FLEx, F540 MAx FLEx

HoW To REAcH US

Send us Your Warranty CardPlease take time to fill in the information requested on the card. When you send in the completed card to us, we reg-ister your Crary Wind System and start coverage under our limited warranty.Two serial number stickers are included with each CWS. The decals are located on the CWS manifold. Place one sticker on the warranty registration card and mail it back to Crary Industries. Place the second sticker in the owner’s manual for future reference.

ADDRESS HoURS TELEPHoNE FAx NUMBER

E-MAIL INTERNET

Crary Industries 237 12th St. NW P.O. Box 849 West Fargo, ND 58078-0849

Mon. - Fri.

8 A.M to 5 P.M. Central Time

For Parts and Service: 1-800-247-7335 Fax: 1-701-282-9522

For Service: [email protected] Visit us on the web @ www.crary.com

Page �Lexion Crary Wind System Parts Catalog

PartS ordering information For service assistance or parts, contact your nearest authorized Crary dealer. Your nearest authorized Crary dealer will need to know the serial number of your Crary Wind System to provide the most efficient service. See information below for how to identify and record the serial number for your Air Reel.

iLLUStration and teXt This parts catalog is arranged to assist in identifying CWS parts. All parts are illustrated in either assembled or exploded views. All illustrations are located on the left hand page with the associated parts information on the right. Except for some common hardware, all parts are identified with an item number that corresponds to the Item column on the parts information page. The text pages list the reference number, part number, part description and the quantity required.

rePLaCement PartS

Only genuine Crary replacement parts should be used to repair the CWS. Crary replacement parts are available from your Crary Dealer. To obtain prompt, efficient service, remember to give the dealer the correct part description and serial number of the CWS.

When ordering parts for your unit provide the following:

1. The SERIAL NUMBER of your CWS.

2. The PART NUMBER of the part.

3. The PART DESCRIPTION.

4. The QUANTITY needed.

SeriaL nUmber LoCation

Give your authorized Crary dealer the serial number of your CWS when ordering parts, requesting service, or any other information. Record the serial number in the space provided below and on the warranty and registration card. The serial number is located on the manifold.

Serial number ________________________

WarningWe urge using only genuine replacement parts, which meet all the latest requirements. Replacement parts manufactured by others could present safety hazards, even though they may fit on this unit.

MANUFACTURED BY CRARY INDUSTRIES

MANUFACTURED IN U.S.A.XXXXXX

WEST FARGO, NORTH DAKOTA 58078 U.S.A.SERIAL NUMBER

ContentsAIR MANIFOLD (25’ HEADERS) .................................................................................................................................. 48AIR MANIFOLD (30’ - 40’ HEADERS) ........................................................................................................................... 49DRIVELINE/C FLANGE ASSEMBLY (LH DRIVE KITS) ................................................................................................ 26DRIVELINE/C FLANGE ASSEMBLY (RH DRIVE KITS) ............................................................................................... 24DRIVELINE, SECONDARY (LH DRIVE KITS) .............................................................................................................. 28DROP TUBE KIT ........................................................................................................................................................... 50FAN HOSE ASSEMBLY (25’ - 30’ HEADERS) .............................................................................................................. 30FAN HOSE ASSEMBLY (35’ HEADERS) ...................................................................................................................... 32FAN HOSE ASSEMBLY (RH) (35’ - 40’ HEADERS)...................................................................................................... 34FAN HOSE ASSEMBLY (LH) (40’ HEADERS) .............................................................................................................. 36GEARBOX/FAN (LEFT HAND) ..................................................................................................................................... 20GEARBOX/FAN (RIGHT HAND) ................................................................................................................................... 18GEARBOX MOUNT/DRIVE KIT (25’ - 30’ HEADERS) .................................................................................................... 6GEARBOX MOUNT/DRIVE KIT (35’ - 40’ HEADERS) .................................................................................................... 7GEARBOX MOUNT/NEUTRAL DRIVE SHAFT (40’ HEADERS) .................................................................................... 8GEARBOX REPLACEMENT PARTS ............................................................................................................................ 22LEFT HAND DRIVE KIT (40’ HEADERS) ...................................................................................................................... 16REEL ARM MOUNT (CENTER) (40’ HEADERS) .......................................................................................................... 46REEL ARM MOUNT (LH) (25’ - 30’ HEADERS) ............................................................................................................ 38REEL ARM MOUNT (LH) (35’ - 40’ HEADERS) ............................................................................................................ 42REEL ARM MOUNT (RH) (25’ - 30’ HEADERS) ........................................................................................................... 40REEL ARM MOUNT (RH) (35’ - 40’ HEADERS) ........................................................................................................... 44RIGHT HAND DRIVE KIT (25’ HEADERS) ................................................................................................................... 10RIGHT HAND DRIVE KIT (30’ HEADERS) ................................................................................................................... 12RIGHT HAND DRIVE KIT (35’ - 40’ HEADERS) ........................................................................................................... 14SWITCH/MOUNT PLATE ASSEMBLY .......................................................................................................................... 51

SeCtion Page


Lexion HeadersF25, F30, F535 MAx FLEx,

F540 MAx FLEx

Parts catalog crary Wind System

Page � Lexion Crary Wind System Parts Catalog

gearboX moUnt/driVe kit 25’ - 30’ HEADERS 07/07

gearboX moUnt/driVe kit (25672)

item Part nUmber deSCriPtion QtY1 12457 BUSHING, 1-3/8” SD 2

2 15012 BOLT, 1/2” X 1” HEX HD 4

3 15013 BOLT, 1/2” X 1-1/4” HEX HD 8

4 15097 WASHER, 1/2” SAE FLAT 12

5 15282 BOLT, 5/16” X 1-1/2” GR5 HEX CPS ZP 6

6 15498 KEY, 5/16” X 1-3/4” SQUARE 2

7 22696 WELDMENT, SHIELD 2

8 25671-12 PLATE, GEARBOX MOUNT 1


07/07 35’ - 40’ HEADERS gearboX moUnt/driVe kit

gearboX moUnt/driVe kit (29133)item Part nUmber dSeCriPtion QtY

1 12457 BUSHING, 1-3/8” SD 2

2 15012 BOLT, 1/2” X 1” HEX HD 4

3 15013 BOLT, 1/2” X 1-1/4” HEX HD 8


5 15282 BOLT, 5/16” X 1-1/2” GR5 HEX CPS ZP 6

6 15498 KEY, 5/16” X 1-1/2” SQUARE 2

7 22696 WELDMENT, SHIELD 2

8 27945-12 PLATE, GEARBOX MOUNT 1

Page � Lexion Crary Wind System Parts Catalog

gearboX moUnt/neUtraL driVe SHaft 40’ HEADERS 07/07


07/07 40’ HEADERS gearboX moUnt/neUtraL driVe SHaft

gearboX moUnt/driVe kit (29874)item Part nUmber deSCriPtion QtY

1 29838-00 RH GEARBOX/FAN (7.269:1) 1

2 29833-12 GBOX DRIVE LH SHIELD 1

3 29832-12 GBOX DRIVE RH SHIELD 1

4 29831-12 HINGE, SHIELD 2

5 29825-12 BRACKET, GEARBOX MT. 1

6 15612 BOLT, 1/2 X 1-1/4” SERRATED FLANGE 4

7 15390 BOLT, 5/16 NC X 6-1/2” GR5 HCS ZP 2

8 15356 NUT, 5/16” NE NYLOCK ZP 2

9 15097 WASHER, 1/2” SAE FLAT ZP 4

10 15013 BOLT, 1/2 X 1-1/4” GR5 HHCS NC ZP 4

11 15012 BOLT, 1/2 X 1” GR5 HEX CAPSCREW ZP 4

12 0125-0060-00 LATCH, FLEXIBLE DRAW 2

13 15423 SCW, MCH 10-24 X 1/2” PAN HD, PH ZP 4

14 15557 BOLT, 10-24 X 3/4” HHCS G8 PLAIN 4

15 15397 NUT, 10/24 NYLOCK TYPE NM, ZP 8

oPtionaL neUtraL driVe SHaft kit (29884)item Part nUmber deSCriPtion QtY


17 15388 NUT, 3/8” NYLOCK 6

18 17060 FLANGETTE, 72MSI 1-3/8” 4

19 17059 BEARING, 1-3/8” ROUND BORE 2

20 15057 BOLT, 3/8 X 1” CRG 6

21 29834-00 SHAFT, 1-3/8” S SPLINE STUB 1

Lexion Crary Wind System Parts Catalog

rigHt Hand driVe kit 25’ HEADERS 07/07


07/07 25’ HEADERS rigHt Hand driVe kit

rigHt Hand driVe kit, 25’ HeaderS (25674)item Part nUmber deSCriPtion QtY

1 15003 BOLT, 5/16” X 3/4” HEX HD 3

2 15031 WASHER, 3/8” FLAT 6

3 15051 NUT, 3/8” SERRATED FLANGE 9

4 15057 BOLT, 3/8” X 1” CARRIAGE 9

5 15153 NUT, 5/16” HEX 2

6 15219 BOLT, 5/16” X 1” HEX HD 2

7 15250 WASHER, 5/16” FLAT 7

8 15498 KEY, 5/16” X 1-3/4” SQUARE 1


10 17060 FLANGETTE, 72MS 1-3/8” 2

11 23140 DRIVESHAFT SHIELD (22”) 1

12 24034 DRIVELINE/C FLANGE ASSEMBLY -L (SEE PAGES 24-25) 1

13 24039 SHIELD MOUNT PLATE ASSEMBLY 1

14 15689-00 BOLT, M10-1.5-30MM GR. 8.8 HWHCS YZP 2

15 24037-12 SHIELD, SLIP CLUTCH 1

16 24492-12 DRIVELINE SUPPORT BRACKET 1

17 25727-00 DRIVESHAFT 1

18 26045-12 BEARING MOUNT BRACKET 1

19 26046-12 MOUNT SUPPORT BRACKET 1

20 15402 NUT, 5/16” -18 TINNERMAN U-TYPE 3


rigHt Hand driVe kit 30’ HEADERS 07/07

�Lexion Crary Wind System Parts Catalog

07/07 30’ HEADERS rigHt Hand driVe kit

rigHt Hand driVe kit, 30’ HeaderS (25675)item Part nUmber deSCriPtion QtY

1 15003 BOLT, 5/16” X 3/4” HEX HD 3

2 15031 WASHER, 3/8” FLAT 6

3 15051 NUT, 3/8” SERRATED FLANGE 9

4 15057 BOLT, 3/8” X 1” CARRIAGE 9

5 15153 NUT, 5/16” HEX 2

6 15219 BOLT, 5/16” X 1” HEX HD 2

7 15250 WASHER, 5/16” FLAT 7

8 15498 KEY, 5/16” X 1-3/4” SQUARE 1


10 17060 FLANGETTE, 72MS 1-3/8” 2

11 21240 DRIVESHAFT SHIELD 1

12 24034 DRIVELINE/C FLANGE ASSEMBLY -L (SEE PAGES 24-25) 1

13 24039 SHIELD MOUNT PLATE ASSEMBLY 1

14 15689-00 BOLT, M10-1.5-30MM GR. 8.8 HWHCS YZP 2

15 24037-12 SHIELD, SLIP CLUTCH 1

16 24492-12 DRIVELINE SUPPORT BRACKET 1

17 25728-00 DRIVESHAFT 1

18 26045-12 BEARING MOUNT BRACKET 1

19 26046-12 MOUNT SUPPORT BRACKET 1

20 15402 NUT, 5/16” -18 TINNERMAN U-TYPE 3


rigHt Hand driVe kit 35’ - 40’ HEADERS 07/07


07/07 35’ - 40’ HEADERS rigHt Hand driVe kit

rigHt Hand driVe kit, 35’ - 40’ HeaderS

item Part nUmber deSCriPtion35’

(29785)QtY

40’(29139)

QtY1 15003 BOLT, 5/16” X 3/4 GR5 HEX HD ZP 3 3

2 15013 BOLT, 1/2” X 1-1/4” GR5 HHCS NC ZP 2 2

3 15057 BOLT, CARR 3/8” X 1” GR5 NC ZP 8 8

4 15097 WASHER, 1/2” SAE FLAT ZP 2 2

5 15250 WASHER, 5/16” FLAT ZP 3 3

6 15260 WASHER, 3/8” SAE FLAT ZP 12 12

7 15364 BOLT, 3/8”X 1-1/4” HEX HD GR5 ZP 4 4

8 15388 NUT, 3/8” NE NYLOCK ZP 8 8

9 15498 KEY, 5/16” X 1-1/2 SQUARE 1 1

10 17059 BEARING 1 3/8, INSERT 2 2

11 17060 FLANGETTE, 72MS RND 3BIT ZP 4 4

12 24034 DRIVELINE/C FLANGE ASSEMBLY-L (SEE PAGES 24-25) 1 1

13 24039 SHIELD MOUNT PLATE ASSEMBLY 1 1

1414473-00 DRIVESHAFT SHIELD TUBE, LG 1

29052-00 DRIVESHAFT SHIELD TUBE, 53” 1

15 24037-12 SLIP CLUTCH SHIELD 1 1

16 27946-12 BEARING MOUNT PLATE 2 2

17 27947-12 BEARING BRACKET MOUNT 1 1

1827949-00 DRIVESHAFT (CAT- 40 RH) 1

29777-00 DRIVESHAFT (CAT-35 RH) 1

1929053-00 DRIVESHAFT SHIELD TUBE, SM 1

29058-00 DRIVESHAFT SHIELD TUBE, 23.75” 1

20 29131-12 PTO HOLDER WELDMENT 1 1

� Lexion Crary Wind System Parts Catalog

Left Hand driVe kit 40’ HEADERS 07/07


07/07 40’ HEADERS Left Hand driVe kit

LH driVe kit (29138)item Part nUmber deSCriPtion QtY

1 17059 BEARING 1 3/8, INSERT 1

2 27946-12 BEARING MOUNT PLATE 1

3 17060 FLANGETTE, 72MS RND 3BIT ZP 2

4 15388 NUT, 3/8” NE NYLOCK ZP 7


6 15057 BOLT, CARR 3/8” X 1” GR5 NC ZP 5

7 15051 NUT, 3/8” SERRATED FLANGE NC ZP 3

8 29826-00 SICKLE/AUGER DRIVE SHAFT LEXION 1

9 27659-12 SLIP CLUTCH SHIELD 1

10 27657-00 SHIELD MOUNT ASSEMBLY 1

11 27947-12 BEARING BRACKET MOUNT 1


13 15013 BOLT, 1/2” X 1-1/4” GR5 HHCS NC ZP 2

14 15402 NUT, 5/16”-18 TINNERMAN U-TYPE 3

15 15003 BOLT, 5/16” X 3/4 GR5 HEX HD ZP 3

16 15250 WASHER, 5/16” FLAT ZP 3

17 18978-00 DRIVELINE, HEADER SECONDARY (SEE PAGES 28-29) 1

18 29823-00 DRIVELINE/CLUTCH 1-3/8 ASSEMBLY (SEE PAGES 26-27) 1

19 29059-00 DRIVESHAFT SHIELD 36.50” 1


gearboX/fan (rigHt Hand) ALL MODELS 07/07


07/07 ALL MODELS gearboX/fan (rigHt Hand)

rH gearboX/fan aSSembLY, 7.269:1 (22757)item Part nUmber deSCriPtion QtY

1 22323 GEARBOX, FAR 7.269:1 (SEE PAGES 22-23) 1

2 21445 HUB/MOTOR MOUNT PLATE (8 IN. -B PILOT) 1

3 15014 BOLT, 1/2” X 1-1/2” HEX HD 4

4 15049 NUT, 1/2 CENTERLOCK GRB ZP 4

5 21193 8” FAN RH SIDE W/ BUTTERFLY 1

6 15076 BOLT, 3/8 X 1 THREAD CUT 8

7 15099 WASHER, 7/8 SAE FLAT 2

8 14056-00 FAN ROTOR, 16.5” X 3” CW, 7/8 STL 1


10 15055 NUT, 3/4” NF CASTLE 1

11 15068 PIN, 5/32 X 1-1/4 COTTER 2

12 21194 8” FAN LH SIDE W/ BUTTERFLY 1

13 15364 BOLT, 3/8 NC X 1-1/4 HEX HD 12

14 15051 NUT, 3/8 SERR FLANGE 12

15 22655 BASE 1

16 23152 WELDMENT, BASE STRAP 1

17 16449 BEARING, 5/8” 2-BOLT FLNG 2

18 15238 BOLT, 1/4 X 3/4” CRG 4

19 23161 WELDMENT, SCREEN/BLADE 1


21 23155 WELDMENT, PIVOT 1

22 23158 WELDMENT, SCREEN CLEANER 1

23 23163 WELDMENT, SCREEN CAP 1

24 15053 NUT, 1/4 SERR FLANGE 8

25 15001 BOLT, 1/4 X 3/4 HEX HD 4

26 15095 SCREW, NO. 14 X 1/2” TAPPING HWH ZP 6

27 7022 KEYSTOCK, 3/16” 1

28 25644-12 WELDMENT, ACTUATOR MOUNT 1

29 25641-12 WELDMENT, VALVE ACTUATOR 1

30 25638-35 WELDMENT, INDICATOR 1

31 21444 PLATE, LARGE BUTTERFLY 1

32 15552 BOLT, #10-24 X 1 IN GR8 HCPS PLAIN 4

33 15397 NUT, #10X24 NYLOCK 4

34 13460-00 ACTUATOR, 2” STROKE WARNER 1

35 15342 BOLT, 1/4 X 1-1/2 HCS G5 ZP 2

36 15087 NUT, 1/4” CENTERLOCK 2

37 25592-12 WRAP, ROTARY SCREEN 1


gearboX/fan (Left Hand) 40’ HEADERS 07/07


07/07 40’ HEADERS gearboX/fan (Left Hand)

LH gearboX/fan aSSembLY, 7.269:1

item Part nUmber deSCriPtion 27237-00QtY

29839-00QtY

1 12457 BUSHING, 1-3/8 SD 2

2 13460-00 ACTUATOR, 2” STROKE WARNER 1 1

3 15001 BOLT, 1/4 X 3/4 HEX HD 4 4

4 15014 BOLT, 1/2 X 1-1/2 HEX HD 4 4

5 15049 NUT, 1/2 CENTERLOCK GRB ZP 4 4

6 15051 NUT, 3/8 SERR FLANGE 12 12

7 15053 NUT, 1/4 SERR FLANGE 8 8

8 15055 NUT, HST SPINDLE CASTLE 1 1

9 15068 PIN, 5/32 X 1-1/4 COTTER 2 2

10 15076 BOLT, 3/8 X 1 THREAD CUT 8 8

11 15087 NUT, 1/4” CENTERLOCK 2 2

12 15095 SCREW, NO. 14X1/2” TAPPING HWH ZP 6 6

13 15099 WASHER, 7/8 SAE FLAT 3 3

14 15129 WASHER, 5/8 SAE FLAT 2 2

15 15238 BOLT, 1/4 X 3/4” CRG 4 4

16 15342 BOLT, 1/4 X 1-1/2 HCS G5 ZP 2 2

17 15364 BOLT, 3/8 NC X 1-1/4 HEX HD 12 12

18 15397 NUT, #10X24 NYLOCK 4 4

19 15498 KEY, 5/16 X 1-3/4 SQ 2

20 15552 BOLT, #10-24 X 1 IN. GR8 HCPS PLAIN 4 4

21 15587 THRUST WASHER, 3/4 X 1-5/16 X .062 1 1

22 16449 BEARING, 5/8” 2-BOLT FLNG. 2 2

23 17705 FAN ROTOR, 16.5” X 3” CCW, 7/8 STL 1 1

24 21193 8” FAN RH SIDE W/ BUTTERFLY 1 1

25 21194 8” FAN LH SIDE W/ BUTTERFLY 1 1

26 21444 PLATE, LARGE BUTTERFLY 1 1

27 21445 HUB/MOTOR MOUNT PLATE (8 IN. -B PILOT) 1 1

28 22323 GEARBOX, FAR 7.269:1 (SEE PAGES 44-45) 1 1

29 22655 BASE 1 1

30 23152 WELDMENT, BASE STRAP 1 1

31 23155 WELDMENT, PIVOT 1 1

32 23158 WELDMENT, SCREEN CLEANER 1 1

33 23163 WELDMETN, SCREEN CAP 1 1

34 25592-12 WRAP, ROTARY SCREEN 1 1

35 25638-35 WELDMENT, INDICATOR 1 1

36 25644-12 WELDMENT, ACTUATOR MOUNT 1 1

37 26383-12 WELDMENT, LH VALVE ACTUATOR 1 1

38 27532-12 WELDMENT, SCREEN/BLADE (8” - LH) 1 1

39 29834-00 SHAFT, 1-3/8” 6 SPLINE STUB 1

40 7022 KEYSTOCK, 3/16” 1 1


gearboX rePLaCement PartS ALL MODELS 07/07


07/07 ALL MODELS gearboX rePLaCement PartS

gearboX rePLaCement PartS (22323)item Part nUmber deSCriPtion QtY

1 NPN 66 GEAR, SP BEV LH 19T 12 NPN 66 GEAR, SP BEV RH 29T 13 NPN 11 NUT, LOCK 3/4 NF 14 NPN 66 SHIM, .002 RED 25 NPN 66 SHIM, .005 BLUE 26 NPN SPEC HOUSING, SUBASSEMBLY 17 NPN SPEC HOUSING, PINION 18 NPN SPEC CAP, OPEN 29 NPN SPEC CAP, CLOSED 2

10 16821 SPEC SLEEVE, INPUT 111 16820 SPEC SHAFT, OUTPUT 112 NPN SPEC GEAR, INTG HEL LH 14T 113 NPN SPEC GEAR, HEL RH 81T 114 NPN SPEC SPACER 115 NPN SPEC SHIM, .002 RED 416 NPN SPEC SHIM, .005 BLUE 417 NPN SPEC SHIM, .002 RED 418 NPN SPEC SHIM, .005 BLUE 419 16815 BEARING, BALL 206NPP OR EQ 220 0201-0077-00 BEARING, 2.328 X .465 CUP 221 16817 BEARING, CUP 222 0201-0078-00 BEARING, 1.250 X .660 CONE 223 16819 BEARING, CONE 224 NPN SCREW, HEX CAP GR5 3/8NC X 1 425 NPN SCREW, HEX CAP GR5 5/16NC X 1 2026 NPN SCREW, HEX CAP GR5 3/8NC X 1-1/4 827 NPN WASHER, 3/4 X 1-1/2 X 1/8 128 NPN WASHER, 1-17/64 X 1-3/4 X 1/8 229 NPN NUT, HEX 3/8NC 830 NPN KEY, P&W 1/4SQ X 15/16 131 NPN KEY, SQ END 3/4SQ X 15/16 132 NPN KEY, WOODRUFF 1/4 X 1 133 16814 RING, RETAINING 5160-118 134 NPN RING, BEVELED RET. N5002-244 135 NPN OIL, MOBILUBE SHC 75W-90 4036 NPN NAME PLATE, CRARY 137 NPN PAINT, FLAT BLACK 5.12038 NPN PLUG, PIPE SOCKET 1/4NPT 239 NPN PLUG, PIPE 1/2” O-RING BOXX 340 NPN PLUG, VENTED 1/8NPT, 1-5 PSI BALL 141 NPN SEAL, 472681 OR EQ 142 NPN SEAL, 32395 OR EQ 243 NPN O-RING, -044 144 NPN O-RING, -158 245 NPN ORING, -138 246 NPN SCREW, HEX CAP GR5 5/16NC X 3/4 147 NPN TAG, LUBRICATION 1

16125 GEARBOX SEAL & SHIM KIT (NOT SHOWN) 125318 GEARBOX, REBUILT (7.269:1) (NOT SHOWN) 1


driVeLine/C fLange aSSembLY RH DRIVE KITS 07/07


07/07 RH DRIVE KITS driVeLine/C fLange aSSembLY

driVeLine/C-fLange aSSembLY (24034)item Part nUmber deSCriPtion QtY

1 13914-00 COUNTER FLANGE, 1-3/8", 21 SPLINE, W/QD 1

2 15070 SCREW, 3/8" X 1" SQUARE HEAD SET 1

3 15219 BOLT, 5/16" X 1" HHCS NC GR5 ZP 6

4 15256 SCREW, 3/8" X 3/4" SQUARE HEAD SET ZP 1

5 15356 NUT, 5/16" NE NYLOCK ZP 6

6 16935 HEADER DRIVELINE W/CLUTCH (L) (SEE TABLE BELOW) 1

WaLterSCHeid driVeLine SerViCe PartSitem Part nUmber deSCriPtion QtY

7 0883-0120-00 KIT, CROSS AND BEARING W-2400 2

8 12209 CHAIN, SHAFETY 1

9 12210 DECAL, OUT 1

10 12211 DECAL, IN 1

11 12215 YOKE, INBOARD 1B 1

12 12218 YOKE, INBOARD 2A 1

13 12220 CONE, 6 RIB SAFETY 2

14 12223 RING, SC25, BEARING 2

15 14714-00 YOKE, FLANGE 1

16 14722-00 CLUTCH, FRICTION 1

A 14061-00 SPRING, BELVILLE (WALTERSCHEID) 1

B 14062-00 SET, FRICTION DISC (WALTERSCHEID) 1

C 14720-00 YOKE, FLANGE 1

D 14721-00 HUB, CLUTCH 1

E 14736-00 PLATE, THRUST 1

F 15647 NUT, M10 X 1.5 HEX NYLOCK TYP NE YZP 6

G 15747-00 BOLT, M10 X 1.5 X 50 CLASS 8.8 HCPS 6

H 15748-00 BOLT, M12 X 1.75 X 65 CLASS 8.8 HCPS 1

J 15749-00 NUT, M12 X 1.75 HEX NYLOCK TYPE NE YZP 1

17

14728-00 PROFILE, INNER 1B, (SHORT)

14732-00 PROFILE, INNER 1B, (LONG) 1

PROFILE, INNER 1B, (MEDIUM)

18

14729-00 PROFILE, OUTER 2A, (SHORT)

14733-00 PROFILE, OUTER 2A, (LONG) 1

PROFILE, OUTER 2A, (MEDIUM)

19

14730-00 TUBE, INNER SHIELD, (SHORT)

14734-00 TUBE, INNER SHIELD, (LONG) 1

TUBE, INNER SHIELD, (MEDIUM)

20

14731-00 TUBE, OUTER SHIELD, (SHORT)

14735-00 TUBE, OUTER SHIELD, (LONG) 1

TUBE, OUTER SHIELD, (MEDIUM)

21 15575 PIN, M10 X 80, SPRING 2


driVeLine/C fLange aSSembLY LH DRIVE KITS 07/07


aSSembLY driVeLine/CLUtCH 1-3/8 6 SPLine (18977-00)item Part nUmber deSCriPtion QtY

5 0883-0120-00 KIT, CROSS AND BEARING W-2400 26 12209 SAFETY CHAIN 17 18967-00 YOKE, INBOARD S4 18 18970-00 YOKE, INBOARD S5 19 12220 CONE, 6 RIB SAFTEY 2

10 12223 RING, SC25 BEARING 211 14714-00 YOKE, FLANGE 112 14744-00 CLUTCH, FRICTION 1

A 14061-00 SPRING, BELVILLE (WSCHIED) 1B 14062-00 SET, FRICTION DISC 1C 14720-00 YOKE, FLANGE 1D 14736-00 PLATE, THRUST 1E 14737-00 HUB, CLUTCH 1F 14738-00 BACK-UP RING 1G 14739-00 BALL, CLUTCH 3H 14740-00 SPRING, COMPRESSION 1I 14741-00 COLLAR, LOCK 1J 14742-00 RING, BACKUP 1K 14743-00 RING, SNAP 1L 15647 NUT, M10 X 1.5 HEX NYLOCK TYPE NE 6M 15747-00 BOLT, M10 X 1.5 X 50 CLASS 8.8 HC 6

13 18968-00 PROFILE, INNER S4LGA 114 18969-00 PROFILE, OUTER S5L 115 18972-00 TUBE, INNER SHIELD ROUND 116 18971-00 TUBE, OUTER SHIELD OVAL 117 15575 PIN, M10 X 80 SPRING 218 12210 DECAL, OUT 119 12211 DECAL, IN 1

driVeLine/C-fLange aSSembLY (29823-00)item Part nUmber deSCriPtion QtY

1 13914-00 COUNTER FLANGE, 1-3/8 21 SPLINE 12 15219 BOLT, 5/16” X 1” GR5 HHCS NC ZP 63 15356 NUT, 5/16” NE NYLOCK ZP 64 18977-00 ASSEMBLY, DRIVELINE/CLUTCH 1-3/8 6 SPLINE (SEE TABLE BELOW) 1

07/07 LH DRIVE KITS driVeLine/C fLange aSSembLY


driVeLine, SeCondarY LH DRIVE KITS 07/07


driVeLine, Header SeCondarY (18978-00)item Part nUmber deSCriPtion QtY

1 12196 YOKE, 1-3/8” 6 SPLINE 22 18976-00 TUBE, INNER SHIELD RND 13 18975-00 TUBE, OUTER SHIELD OVAL 14 18974-00 PROFILE, OUTER 1 15 18973-00 PROFILE, INNER OV 16 12210 DECAL, OUT 17 0883-0121-00 KIT, CROSS AND BEARING W -2300 28 15573 PIN, M10 X 65 SPRING 2

10 12209 CHAIN, SAFETY 111 12208 RING, SC15 BEARING 212 12205 CONE, 5 RIB SHIELD 213 12201 YOKE, INBOARD 1 114 12198 YOKE, INBOARD OV 1

15574 SCREW, WS365305 (NOT SHOWN) 212211 DECAL, IN (NOT SHOWN) 1

07/07 LH DRIVE KITS driVeLine, SeCondarY

Page �0 Lexion Crary Wind System Parts Catalog

fan HoSe aSSembLY 25’ - 30’ HEADERS 07/07

Page �1Lexion Crary Wind System Parts Catalog

fan HoSe aSSembLY (25’ - 30’ HeaderS)item Part nUmber deSCriPtion QtY

1 12146 ELBOW, RUBBER-8” X 45 DEG. 1

2 15031 WASHER, 3/8” FLAT ZP 4

3 15116 BOLT, 3/8” X 2-1/2” GR5 HHCS ZP 2

4 15351 NUT, 5/16” SERR FLANG NC ZP 4



7 16091 T-BOLT, CLAMP 8-3-8” 4

8 16092 T-BOLT, CLAMP 8-11/16” 4

9 17437 MANIFOLD ELBOW, -8” (MR) 1

10 17777 FLEX HOSE 8” ID X 8FT 1

11 21512 BAND, ELBOW SUPPORT 2

12 15700-00 U-BOLT, 5/16” -18 X 8.19 X 6.59 2

13 25837-00 MANIFOLD 15-20FT. HEADER/END 1

14 26171-12 TUBE MOUNT WELDMENT 2

07/07 25’ - 30’ HEADERS fan HoSe aSSembLY


fan HoSe aSSembLY 35’ HEADERS 07/07

Page ��Lexion Crary Wind System Parts Catalog

07/07 35’ HEADERS fan HoSe aSSembLY

fan HoSe aSSembLY (35’ HeaderS)item Part nUmber deSCriPtion QtY

1 12146 ELBOW, RUBBER-8” X 45 DEG. 1

2 15219 BOLT, 5/16” X 1” GR5 HHCS NC ZP 4

3 15250 WASHER, 5/16” FLAT ZP 8

4 15356 NUT, 5/16” NE NYLOCK ZP 4

5 16091 T-BOLT CLAMP 8-3/8” 4

6 16092 T-BOLT CLAMP 8-11/16” 4

7 17437 MANIFOLD ELBOW -8” (MR) 1

8 17777 FLEX HOSE 8” ID X 8FT 1

9 21512 BAND, ELBOW SUPPORT 2

10 25617-12 HOSE CONNECTOR WELDMENT 1

11 74737-00 HOSE, 8” X 4FT. FLEX 1

12 29127-12 PLATE, EXTENDER 1


fan HoSe aSSembLY (rH) 35’ - 40’ HEADERS 07/07


07/07 35’ - 40’ HEADERS fan HoSe aSSembLY (rH)

rH fan HoSe aSSembLY (35’ - 40’ HeaderS)item Part nUmber deSCriPtion QtY

1 12146 ELBOW, RUBBER -8” X 45 DEG. 12 15260 WASHER, 3/8” FLAT ZP 183 15219 BOLT, 5/16 X 1” GR5 HHCS NC ZP 24 15356 NUT, 5/16” NE NYLOCK ZP 25 15388 NUT, 3/8” NE NYLOCK ZP 66 15250 WASHER, 5/16” SAE FLAT ZP 27 16091 T-BOLT CLAMP 8-3/8” 28 16092 T-BOLT CLAMP 8-11/16” 49 17437 MANIFOLD ELBOW -8” (MR) 1

22664 FLEX HOSE SUPPORT BAND ASSEMBLY (INCLUDES ITEMS 7, 10 & 11) 17 16091 T-BOLT CLAMP 8-3/8” 2

10 17777 FLEX HOSE 8” ID X 8FT 111 21512 BAND, ELBOW SUPPORT 2

12 15700-00 U-BOLT, 5/16” -18 X 8.19 X 6.59 113 25837-00 MANIFOLD 15-20FT. HEADER/END 114 29159-12 TUBE MOUNT WELDMENT 115 29949-12 BRACKET, TUBE MOUNT 1

25908-00 HALF CLAMP ASSEMBLY (INCLUDES ITEMS 16 & 17) 116 23501 CLAMP, HALF 117 22809 GUIDE, SADDLE 1

29952-00 TUBE MOUNT ASSEMBLY (INCLUDES ITEMS 17 & 18) 117 228009 GUIDE, SADDLE 118 29951-12 TUBE MOUNT WELDMENT 1

19 15017 BOLT, 1/2” X 4-1/2” GR5 HHCS NC ZP 120 15034 WASHER, 1/2” FLAT ZP 221 15378 BOLT, CARR 3/8 X 1-1/4” GR5 NC ZP 422 0101-0100-00 NUT, 1/2-13 UNC NYLOCK 123 15364 BOLT, 3/8” X 1-1/4” HEX HD GR5 ZP 2

Page �� Lexion Crary Wind System Parts Catalog

fan HoSe aSSembLY (LH) 40’ HEADERS 07/07


07/07 40’ HEADERS fan HoSe aSSembLY (LH)

LH fan HoSe aSSembLY (40’ HeaderS)item Part nUmber deSCriPtion QtY

2 15260 WASHER, 3/8” FLAT ZP 183 15219 BOLT, 5/16 X 1” GR5 HHCS NC ZP 24 15356 NUT, 5/16” NE NYLOCK ZP 25 15388 NUT, 3/8” NE NYLOCK ZP 66 15250 WASHER, 5/16” SAE FLAT ZP 27 16091 T-BOLT CLAMP 8-3/8” 38 16092 T-BOLT CLAMP 8-11/16” 49 17437 MANIFOLD ELBOW -8” (MR) 2

22664 FLEX HOSE SUPPORT BAND ASSEMBLY (INCLUDES ITEMS 7, 10 & 11) 17 16091 T-BOLT CLAMP 8-3/8” 2

10 17777 FLEX HOSE 8” ID X 8FT 111 21512 BAND, ELBOW SUPPORT 2

12 15700-00 U-BOLT, 5/16” -18 X 8.19 X 6.59 113 25837-00 MANIFOLD 15-20FT. HEADER/END 214 29159-12 TUBE MOUNT WELDMENT 115 29949-12 BRACKET, TUBE MOUNT 1

25908-00 HALF CLAMP ASSEMBLY (INCLUDES ITEMS 16 & 17) 116 23501 CLAMP, HALF 117 22809 GUIDE, SADDLE 1

29952-00 TUBE MOUNT ASSEMBLY (INCLUDES ITEMS 17 & 18) 117 228009 GUIDE, SADDLE 118 29951-12 TUBE MOUNT WELDMENT 1

19 15017 BOLT, 1/2” X 4-1/2” GR5 HHCS NC ZP 120 15034 WASHER, 1/2” FLAT ZP 221 15378 BOLT, CARR 3/8 X 1-1/4” GR5 NC ZP 422 0101-0100-00 NUT, 1/2-13 UNC NYLOCK 123 15364 BOLT, 3/8” X 1-1/4” HEX HD GR5 ZP 2

Page �� Lexion Crary Wind System Parts Catalog

reeL arm moUnt (LH) 25’ - 30’ HEADERS 07/07


reeL arm moUnt kit, 25’ - 30’ HeaderS (27982)item Part nUmber deSCriPtion QtY

1 15007 BOLT, 3/8” X 1-1/2” GR5 NC ZP 1

2 15016 BOLT, 1/2” X 3-1/2” GR5 HEXHD ZP 1



5 15092 BOLT, 1/2” X 2-1/2” GR5 HEX CAP ZP 1


7 15173 BOLT, 1/2” X 3-1/4” HCS GR5 ZP 1

8 15364 BOLT, 3/8” X 1-1/4” HEX HD GR5 ZP 1


10 15058 BOLT, CARR 3/8” X 1-1/2” GR5 NC ZP 3

11 16091 T-BOLT, CLAMP 8-3/8” 1

12 17446 TUBE, CAP - 8” 1

13 17843 ELECTRIC ACTUATOR 1

14 22479 PIVOT CLAMP ASSEMBLY 1

15 21733 BRACE CLAMP 1

16 22809 GUIDE, SADDLE 2

17 23501 HALF CLAMP 1

18 0101-0100-00 NUT, 1/2”-13 UNC NYLOCK 5

19 15014 BOLT, 1/2” X 1-1/2” HEX HD GR5 ZP 1

20 25815-12 STRAP, ADJUSTMENT 1

21 25834-12 TUBE, ARM MOUNT (CIH, GLEANER) 2

23 25847-12 LH, REEL MT. WELDMENT (CIH, CWS) 1

25 27956-12 LH, REEL ARM WELDMENT (CAT, CWS) 1

07/07 25’ - 30’ HEADERS reeL arm moUnt (LH)


reeL arm moUnt (rH) 25’ - 30’ HEADERS 07/07


reeL arm moUnt kit, 25’ - 30’ HeaderS (27982)item Part nUmber deSCriPtion QtY

1 15007 BOLT, 3/8” X 1-1/2” GR5 NC ZP 2

2 15016 BOLT, 1/2” X 3-1/2” GR5 HEXHD ZP 1





7 15173 BOLT, 1/2” X 3-1/4” HCS GR5 ZP 1

8 15364 BOLT, 3/8” X 1-1/4” HEX HD GR5 ZP 1







18 0101-0100-00 NUT, 1/2”-13 UNC NYLOCK 3

19 15014 BOLT, 1/2” X 1-1/2” HEX HD GR5 ZP 1



22 25836-12 RH, REEL MT. WELDMENT (CIH, CWS) 1

24 27954-12 RH, REEL ARM BRACKET (CAT) 1

07/07 25’ - 30’ HEADERS reeL arm moUnt (rH)


reeL arm moUnt (LH) 35’ - 40’ HEADERS 07/07


reeL arm moUnt kit, 35’ (29783) - 40’ (29970) HeaderSitem Part nUmber deSCriPtion QtY

1 15116 BOLT, 3/8” X 2-1/2” GR5 HHCS ZP 1

2 15012 BOLT, 1/2” X 1” GR5 HEX CPSCREW ZP 1

3 0103-0792-00 BOLT, 1/2” X 2-1/4” HEX GR5 ZP 1





8 15016 BOLT, 1/2” X 3-1/2” GR5 HEXHD ZP 2

9 15388 NUT, 3/8” NE NYLOCK ZP 10


11 16091 T-BOLT, CLAMP 8-3/8” 1

12 17446 TUBE, CAP - 8” 1


14 22479 PIVOT CLAMP ASSEMBLY 1




18 0101-0100-00 NUT, 1/2”-13 UNC NYLOCK 4


21 25847-12 LH, REEL MT. WELDMENT (CIH, CWS) 1


23 29782-12 WELDMENT, REEL ARM MOUNT (LEXION) 1

07/07 35’ - 40’ HEADERS reeL arm moUnt (LH)


reeL arm moUnt (rH) 35’ - 40’ HEADERS 07/07


reeL arm moUnt kit, 35’ (29783) - 40’ (29970) HeaderSitem Part nUmber deSCriPtion QtY

1 15116 BOLT, 3/8” X 2-1/2” GR5 HHCS ZP 1

2 15012 BOLT, 1/2” X 1” GR5 HEX CPSCREW ZP 1




8 15016 BOLT, 1/2” X 3-1/2” GR5 HEXHD ZP 2






18 0101-0100-00 NUT, 1/2”-13 UNC NYLOCK 3


20 25836-12 RH, REEL MT. WELDMENT (CIH, CWS) 1


23 29782-12 WELDMENT, REEL ARM MOUNT (LEXION) 1

07/07 35’ - 40’ HEADERS reeL arm moUnt (rH)


reeL arm moUnt (Center) 40’ HEADERS 07/07


07/07 40’ HEADERS reeL arm moUnt (Center)

reeL arm moUnt kit, 40’ HeaderS (29970)item Part nUmber deSCriPtion QtY

1 16092 T-BOLT CLAMP 8-11/16” 22 23501 CLAMP, HALF 13 25836-12 REEL MOUNT WELDMENT 14 15388 NUT, 3/8” NE NYLOCK ZP 45 15057 BOLT, CARR 3/8 X 1” GR5 NC ZP 46 29961-12 STRAP, CENTER ADJUSTMENT 17 29960-12 CENTER SPACER WELDMENT 18 25834-12 TUBE, ARM MOUNT 19 15364 BOLT, 3/8 X 1-1/4” HEX HD GR5 ZP 2

10 15274 BOLT, 3/8 X 4-1/2” HHCS GR5 NC ZP 111 15260 WASHER, 3/8” SAE FLAT ZP 312 15097 WASHER, 1/2” SAE FLAT ZP 213 15047 NUT, 3/8 CENTERLOCK ZP 114 15034 WASHER, 1/2” FLAT ZP 115 15016 BOLT, 1/2 X 3-1/2” GR5 HEX HD ZP 616 15016 BOLT, 1/2 X 3-1/2” GR5 HEX HD 117 15013 BOLT, 1/2 X 1-1/4” GR5 HHCS NC ZP 118 0101-0100-00 NUT, 1/2-13 UNC NYLOCK 319 29958-12 REEL ARM MOUNT CENTER WELDMENT 120 22809 GUIDE, SADDLE 2


25’ CWS manifoLd aSSembLY (12” SPaCing) (25933)item Part nUmber deSCriPtion QtY

1 25883-33 MANIFOLD, 25 FT. CWS (12”) 1

2 14077-00 DECAL, CWS LOGO (YELLOW) 1

air manifoLd 25’ HEADERS 07/07


30’ - 40’ CWS manifoLd aSSembLY (12” SPaCing)

item Part nUmber deSCriPtion30 ft.

(27500)QtY

35 ft.(27247)

QtY

40 ft.(29967)

QtY

127490-33 WELDMENT, 30 FT. CWS RH/LH MANIFOLD (12”) 127216-33 WELDMENT, 35 FT. CWS RH/LH MANIFOLD (12”) 129963-33 WELDMENT, 40 FT. CWS RH/LH MANIFOLD (12”) 127496-00 ASSEMBLY, 30 FT. CWS CENTER MANIFOLD (12”) (INCLUDES ITEMS 2-6) 1

2 27491-33 WELDMENT, 30 FT. CWS CENTER MANIFOLD (12”) 13 14077-00 DECAL, CWS LOGO (YELLOW) 1

4 27214-00 PLATE, CONNECTOR/BAFFLE 15 15007 BOLT, 3/8” X 1-1/2 GR5 HCS ZP 16 15388 NUT, 3/8” NE NYLOCK ZP 1

27219-00 ASSEMBLY, 35 FT. CWS CENTER MANIFOLD (12”) (INCLUDES ITEMS 2-6) 12 27217-33 WELDMENT, 35 FT. CWS CENTER MANIFOLD (12”) 13 14077-00 DECAL, CWS LOGO (YELLOW) 14 27214-00 PLATE, CONNECTOR/BAFFLE 15 15007 BOLT, 3/8” X 1-1/2 GR5 HCS ZP 16 15388 NUT, 3/8” NE NYLOCK ZP 1

29966-00 ASSEMBLY, 40 FT. CWS CENTER MANIFOLD (12”) (INCLUDES ITEMS 2-6) 12 29965-33 WELDMENT, 40 FT. CWS CENTER MANIFOLD (12”) 13 14077-00 DECAL, CWS LOGO (YELLOW) 14 27214-00 PLATE, CONNECTOR/BAFFLE 15 15007 BOLT, 3/8” X 1-1/2 GR5 HCS ZP 16 15388 NUT, 3/8” NE NYLOCK ZP 1

07/07 30’ - 40’ HEADERS air manifoLd


droP tUbe kit

item Part nUmber deSCriPtion

Long(25920)

QtY

SHort(25919)

QtY1 15351 NUT, 5/16” SERRATED FLANGE NC ZP 2 22 15416 WASHER, 5/16” SAE FLAT ZP 2 23 15700-00 U-BOLT, 5/16-18 X 8.19” X 6.59” 1 1

425831-00 WELDMENT, SHORT AIR TUBE 125832-00 WELDMENT, LONG AIR TUBE 1

droP tUbe kit ALL MODELS 07/07

Page �1Lexion Crary Wind System Parts Catalog

07/07 ALL MODELS SWitCH/moUnt PLate

SWitCH/moUnt PLate aSSembLY (24333)item Part nUmber deSCriPtion QtY

1 12167 DECAL, ACTUATOR SWITCH 1

2 13901 SWITCH, ELECTRIC 3P COL 2

3 17849 ELECTRIC SWTICH ASSEMBLY - SPLIT 6 AMP 1

4 17850 ELECTRIC SWITCH ASSEMBLY - SPLIT 15 AMP 1

5 24332-12 PLATE, SWITCH MOUNT 1

manufactured in the United States of america

by Crary industries

237 12TH ST. NW • P.O. BOX 849 WEST FARGO, ND 58078-0849(701) 282-5520 • (701) 282-9522

www.crary.com

parts manual - crarymanuals.crary.com/manuals/cws/29776-00_r072507.pdf · parts manual manual pn...

Documents