335 台灣桃園縣大溪鎮南興里仁和路二段255 號英業達股份有限 …

335

台灣桃園縣

大溪鎮南興里仁和路二段255 號

英業達股份有限公司 MS. NANCY TSAI

MS. NANCY TSAI

INVENTEC CORP

255 JEN-HO RD, SEC 2

NAN-HSIN LI Date: 2013/11/01

TACHI Subscriber: 605123004

TAOYUAN PartySite: 131345

335 TAIWAN File No: E238623

Project No: 13NB05631

PD No: 13M45589

Type: R

PO Number:

Subject: Procedure And/Or Report Material

The following material resulting from the investigation under the above numbers is enclosed.

Issue

Date Vol Sec Pages Revised Date

X1 Index Page(s)

2013/10/31 X1 A150 Add New Proc/Report Sect

Project 4786088957.

If there are illegible images in this package, legible images may be found online via MyHome@UL

under My UL Reports/CDA.

Inspections at your plant will be conducted under the supervision of MARSY MA, UL INSPECTION CENTER

TAIPEI, UL INTERNATIONAL SERVICES LTD, 260 DA-YEH RD, 5TH FL, PEITOU, TAIPEI CITY, Taiwan, 112.,

PHONE: 2-2893-8033, FAX: 2-2897-8628, EMAIL: [email protected]

Please file revised pages and illustrations in place of material of like identity. New material

should be filed in its proper numerical order.

NOTE: Follow-Up Service Procedure revisions DO NOT include Cover Pages, Test Records and Conclusion

Pages. Report revisions DO NOT include Authorization Pages, Indices, Section General Pages and

Appendixes.

Please review this material and report any inaccuracies to UL's Customer Service Professionals.

Contact information for all of UL's global offices can be found at

http://www.ul.com/global/eng/pages/corporate/contactus.

If you’d like to receive updated materials FASTER, UL offers electronic access and/or delivery of

this material. For more details, contact UL's Customer Service Professionals as shown above.

This material is provided on behalf of UL LLC(UL) or any authorized licensee of UL.

TPI File

UL INSPECTION CENTER 818

File Volume Page Date:

E238623 Index X1 1 2013-10-31

Index

Product Type Model/Type Reference Report Reference #

Status

Server T163R E238623-A1-UL PC server IS-120 E238623-A2-UL Server IB-4200, VEG-4X E238623-A3-UL Server IR2200, IX2200, IR2250x, IR2255x, IR2350x,

SG120, SR2042xx, SR2046xx, IX2210 (where x can be 0-9, A-Z, or blank)

E238623-A4-UL

Storage IB-3100, IX3150 E238623-A5-UL Storage Controller Module

IB-3100C E238623-A6-UL

Listed Accessory, Server Module

Server Module: IB-4200-XXX, where X may be any alphanumeric characters or blank.

E238623-A7-UL

Server IR1100, IX1100 E238623-A8-UL Server IR2100, SR1072xx (x can be 0-9, A-Z or blank) E238623-A9-UL Server IR1200, IX1200, SR1062xx(x can be 0-9, A-Z or

blank) E238623-A11-UL

Server IR2150, IR2300, SNPRF 0501, IR1250, ESR0004, SD8001

E238623-A12-UL

Server IR3340 E238623-A14-UL Server FortiGate-3000A E238623-A18-UL Server FortiAnalyzer-4000 E238623-A21-UL Server IR2185, IR2188, E-9425R, E-9422R, IR2400,

IR2408, Tecal RH1280 E238623-A25-UL

Server E-9522R, IR2280, E-9525R, IR2500, Tecal RH2280 E238623-A26-UL Server IS2180, E-9520T E238623-A27-UL Storage SJ1060-OL E238623-A28-UL Server SS2280 E238623-A29-UL Server IR4300 and E-9722R E238623-A30-UL Server IR2900, ESR0003, Email and Web Security 3000

Appliance E238623-A31-UL

Server E-9232T E238623-A32-UL Storage ESS0001 E238623-A33-UL Storage SD7001 E238623-A34-UL Server Secure Internet Gateway 3000, Email and Web

Security 3000. E238623-A35-UL

Storage ESS0002 E238623-A37-UL Server ESR0007 E238623-A40-UL Server EST0008 E238623-A41-UL Server ESR0010, Relion 650 E238623-A43-UL Server XS23-SB2 E238623-A49-UL Server ESR0011 E238623-A53-UL Server EST0013, XS23-TY, EST0015, XS21-TY E238623-A57-UL Server 9000 Series, CF 5000 Series E238623-A58-UL PCI-E Express SAS Raid Adaptor

25121, 25152 and 25305 E238623-A63-UL

PCI-E SAS HBA Card

25239 E238623-A64-UL

Server AVx400, Ax1200 (x is 0-9, A-Z or blank), PS12000 and PR10

E238623-A73-UL

Accessory PCI-E 25340 and 25341 E238623-A81-UL


E238623 Index X1 2 2013-10-31

Network HBA Card (Host Bus Adaptor Card)

Storage DD670, DD860/860g, DD890, DD640 E238623-A85-UL Accessory - PCI-E HBA Card (Host Bus Adaptor Card)

25243 E238623-A88-UL

Switch LYNX6160, Puma SAS Switch, SAS6160 E238623-A91-UL Switch LYNX6161, SAS6161 E238623-A93-UL Accessory - SAS HBA Card (Host Bus Adaptor Card)

25377, 25390, 25389 E238623-A95-UL

Accessory - SAS HBA card (Host Bus Adaptor Card)

25366, 25367 E238623-A100-UL

Accessory - SAS HBA card (Host Bus Adaptor Card)

25410 E238623-A103-UL

Server K60 E238623-A106-UL Accessory, PCI Express RAID Adapter

25413 E238623-A107-UL

Accessory, PCI Express RAID Adapter

25421, 25422 E238623-A111-UL

Server F1D E238623-A117-UL Accessory - SAS HBA card (Host Bus Adaptor Card)

25448 E238623-A121-UL

SAS Switch MX-B 6240-DC, MX-B 6480-DC E238623-A126-UL SAS Switch MX-B 6240-AC, MX-B 6480-AC E238623-A127-UL Server K900XXXXX(The "X" in the model can be

alphanumeric character or blank for marketing purpose and no impact safety related constructions and critical components except for model designation)

E238623-A128-UL


25420 E238623-A132-UL


25503 E238623-A134-UL


25580 E238623-A136-UL


25581 E238623-A139-UL


25504 E238623-A142-UL


25190 E238623-A146-UL

Accessory, PCI 25528 E238623-A150-UL


E238623 Index X1 3 2013-10-31

Express RAID Adapter

Issue Date: 2013-10-31 Page 1 of 7 Report Reference # E238623-A150-UL

Copyright © 2013

UL TEST REPORT AND PROCEDURE

Standard: UL 60950-1, 2nd Edition, 2011-12-19 (Information Technology Equipment - Safety - Part 1: General Requirements) CSA C22.2 No. 60950-1-07, 2nd Edition, 2011-12 (Information Technology Equipment - Safety - Part 1: General Requirements)

Certification Type: Listing

CCN: NWGQ, NWGQ7 (Information Technology Equipment Including Electrical Business Equipment)

Product: Accessory, PCI Express RAID Adapter

Model: 25528

Rating: N/A

Applicant Name and Address: INVENTEC CORP 349 JEN-HO RD SEC 2 TACHI TAOYUAN HSIEN 335 TAIWAN

This is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the above referenced Standards. The products have been found to comply with the requirements covering the category and the products are judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on such products which comply with this Test Report and any other applicable requirements of UL LLC ('UL') in accordance with the Follow-Up Service Agreement. Only those products which properly bear the UL Mark are considered as being covered by UL's Follow-Up Service under the indicated Test Procedure. The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety. Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL.

Prepared by: Neil Lin Reviewed by: Stephen Huang


Supporting Documentation

The following documents located at the beginning of this Procedure supplement the requirements of this Test Report:

A. Authorization - The Authorization page may include additional Factory Identification Code markings.

B. Generic Inspection Instructions -

i. Part AC details important information which may be applicable to products covered by this Procedure. Products described in this Test Report must comply with any applicable items listed unless otherwise stated in the body of this Test Report.

ii. Part AE details any requirements which may be applicable to all products covered by this Procedure. Products described in this Test Report must comply with any applicable items listed unless otherwise stated in the body of each Test Report.

iii. Part AF details the requirements for the UL Certification Mark which is not controlled by the technical standard used to investigate these products. Products are permitted to bear only the Certification Mark(s) corresponding to the countries for which it is certified, as indicated in each Test Report.

Product Description

Electronic components were mounted on PWB and supplied by SELV via the end-use Server's main board.

Model Differences

N/A

Technical Considerations

Equipment mobility : for building-in

Connection to the mains : N/A

Operating condition : continuous

Access location : N/A

Over voltage category (OVC) : N/A

Mains supply tolerance (%) or absolute mains supply values : No direct connection

Tested for IT power systems : No

IT testing, phase-phase voltage (V) : N/A

Class of equipment : Class III (supplied by SELV)

Considered current rating of protective device as part of the building installation (A) : N/A

Pollution degree (PD) : PD 2

IP protection class : IP X0

Altitude of operation (m) : Up to 2000m

Altitude of test laboratory (m) : Up to 2000m

Mass of equipment (kg) : 0.18 kg max.

The product was submitted and evaluated for use at the maximum ambient temperature (Tma) permitted by the manufacturer’s specification of: 55°C

The following circuit locations (with circuit/schematic designation) were investigated as a limited power source (LPS): All output ports.

The following are available from the Applicant upon request: Installation (Safety) Instructions / Manual

Ultracapacitor Module w/ future effective requirements: The product contains an ultracapacitor


module that complies with the Standard for Electrochemical Capacitors, UL810A.

Fire enclosure, electrical enclosure and mechanical enclosure shall be provided in the final system.

Heating test need be evaluated in the final system.

Additional Information

For SuperCap Module: - Tecate Industries Inc /17-0007-4483: rating = 13.5V, 2.0F, and with clause 2.1.1.5, E > 20J. - Tecate Industries Inc /17-0005-4483: rating = 13.5V, 6.4F, and with clause 2.1.1.5, E > 20J. - Tecate Industries Inc /17-0017-4483: rating = 13.5V, 6.4F, and with clause 2.1.1.5, E > 20J.

Additional Standards

The product fulfills the requirements of: CSA C22.2 No. 60950-1-07 + A1:2011

Markings and instructions

Clause Title Marking or Instruction Details

Power rating - Model Model Number

Power rating - Company identification

Listee's or Recognized company's name, Trade Name, Trademark or File Number

Replaceable batteries "CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions."

Accessory Instructions Accessory Marking is required. Statement "For use only with compatible UL Listed server that have Installation Instructions detailing user installation of card cage accessories" or similar statement is provided in the operation/user's manual and/or on the equipment.

Special Instructions to UL Representative

N/A


Production-Line Testing Requirements

Electric Strength Test Special Constructions - Refer to Generic Inspection Instructions, Part AC for further information.

Model Component Removable

Parts Test probe location V

rms V dc Test Time,

s

-- -- -- -- -- -- --

Earthing Continuity Test Exemptions - This test is not required for the following models:

All models.

Electric Strength Test Exemptions - This test is not required for the following models:

All models.

Electric Strength Test Component Exemptions - The following solid-state components may be disconnected from the remainder of the circuitry during the performance of this test:

--

Sample and Test Specifics for Follow-Up Tests at UL

Model Component Material Test Sample(s) Test

Specifics

-- -- -- -- -- --


1.5.1 TABLE: list of critical components Pass

Object/part or Description

Manufacturer/ trademark

type/model technical data Product Category CCN(s)

Required Marks of Conformity

Supplement ID

01. PWB interchangeable interchangeable Rated V-1 minimum, 105 degree C minimum

ZPMV2 UL

02. Heat Sink (on U2A1) -- -- Aluminum. see Enclosure 4-04 for details

-- --

03. Internal Plastic Part/ Materials

interchangeable interchangeable Rated V-2 minimum QMFZ2 UL

04. Connectors and Receptacles (secondary ELV/SELV circuits)

interchangeable interchangeable Metal/plastics, Copper alloy pins housed in bodies of plastic rated V-2 min.

DUXR2 or RTRT2 or ECBT2 or QMFZ2

UL

05. Wiring (Secondary ELV/SELV) (Optional)

interchangeable interchangeable FEP, PTFE, PVC, TFE, neoprene, polyimide or marked VW-1; 60 V min., 60 degree C min.

AVLV2 UL

06. SuperCap Module (Optional)

Tecate Industries Inc 17-0007-4483 13.5Vdc, 2F BBBG2 UL

06a. SuperCap Module (Alternate) (Optional)

Tecate Industries Inc 17-0005-4483 13.5Vdc, 6.4F BBBG2 UL

06b. SuperCap Module (Alternate) (Optional)

Tecate Industries Inc 17-0017-4483 13.5Vdc, 6.4F BBBG2 UL

07. Battery Pack(Optional)

Palladium Energy Inc/ LSI

BAT1S1P-A 3.7Vdc,1.59Ah, 5.9W or 1.5Ah, 5.6W

NWGQ2, BBSF2 UL

08. Label (Marking on PWB)

-- -- Printed by ink -- --

09. Insulating Tubing/Sleeving (Optional)

interchangeable interchangeable FEP, PTFE, PVC, TFE, neoprene, polyimide or marked VW-1; 105 degree C, 300 V.

UZFT2, YDPU2, YDTU2

UL

10. Glue/Epoxy on daughter board (for Super Cap module) (Optional)

interchangeable interchangeable V-2 min. covered on conductive parts of U6-pin1, pin2; U15-pin11; C25-pin1; C1-pin1; J1-pin1, pin2; Q3-pin4; Q1-pin5, pin6. See Enclosure ID 4-06 for detail.

-- UL


Enclosures

Type Supplement Id Description

Photographs 3-01 Overall View - 1

Photographs 3-02 Overall View – 2

Photographs 3-03 Overall View – 3 (With daughter board, SuperCap Module)

Photographs 3-15 Overall View – 4 (With daughter board, SuperCap Module) (Alternate)

Photographs 3-16 Overall View – 5 (With daughter board, SuperCap Module) (Alternate)

Photographs 3-17 Overall View – 6 (With daughter board, Battery Pack Module)

Photographs 3-19 Daughter Board – 1

Photographs 3-20 Daughter Board – 2

Diagrams 4-02 Bracket with openings – 1

Diagrams 4-03 Bracket with openings – 2 (Alternate)

Diagrams 4-04 Heatsink

Diagrams 4-06 Glue Location

Schematics + PWB

Manuals

Miscellaneous

File E238623 Vol. X1 Sec. A150 PHO-01 Issued: 2013-10-31

File E238623 Vol. X1 Sec. A150 DIA-02 Issued: 2013-10-31

335 台灣 桃園縣 大溪鎮南興里仁和路二段255 號 英業達股份有限 …

Documents

335 台灣桃園縣大溪鎮南興里仁和路二段255 號英業達股份有限 …