SIJ ACRONI d.o.o.Cesta Borisa Kidriča 44, 4270 Jesenice, Slovenia, EU

+386 4 584 10 00uprava@acroni.sisij.acroni.si

S P E C I F I C AT I O N S H E E T

SIDUR 3401 is a non-magnetic abrasion resistant steel well known for its high impact strength and abrasion resistance. It is not resistant to corrosion. When in work-hardened state, it achieves up to 600 HB.

Railway, shotblasting machine liner plates, recycling equipment, lifting equipment, security safe.

î Chemical composition

î Typical mechanical properties*

î Applications

î Available specifications

C max Si max Mn max P S Cr1.3 0.4 11.0–13.0 0.020 0.001 0.55

Tensile properties Hardness

SIDUR 3401 Thickness [mm (˝)]

Yield strength Rp 0.2 [MPa]

Tensile strength Rm [MPa] Elongation A5 [%] HB

Quarto plate –80 350 800–1000 30 240Hot-rolled sheet 3–5 350 800–1000 30 240Cold-rolled sheet 2.5 350 800–1000 30 240

Tensile test: According to EN ISO 6892–1 (upon request)

Hardness test: Brinell testing according to EN ISO 6506 – 1 (one test per mother plate)

* orientational value

X120Mn12 1.3401 ~ASTM A128 Grade B2

CONTINUOUSLY CAST MANGAN-ALLOY STEEL PLATES

3401

SPECIFICATION SHEET

• Magnification: 25x, 6 mm plate

• Fine-grained, austenitic structure

The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to en-able the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. The recipient of this literature will not automatically receive updated editions as they become available.

• solution annealed

î Microstructure

î Disclaimer

î Delivery conditions

î Dimensional range

Quarto plates Hot-rolled sheets Cold-rolled sheets

Thickness 6–80 mm 3–5 mm 2,5 mm

Width < 2,500 mm < 1000 mm 1000 mm

Length < 12,000 mm 2000–3000 mm 2000–3000 mm

Tolerances Acc. to EN 10029 Acc. to EN 10051 Acc. to EN 10131

Inspection documents Acc. to EN 10204 – 3.1 Acc. to EN 10204 – 3.1 Acc. to EN 10204 – 3.1

SIDU

R 34

01-0

1-01

9-EN

3401