Installation Ready

Blower4310Series

Series

607-

SeriesVacuum pumps & Blowers

607 Heavy Duty Vacuum Pump Packages

Reliable – Efficient – Cost Effective

natvac.com

National Vacuum Equipment Locations in Michigan & TexasMADEIN USA

800-253-5500 | 800-998-6834 FAX | sales@natvac.com

607 Max Pak

380 CFM!

Factory Designed and Built for the Perfect Fit

#1 Industrial Duty Vacuum Pump

Hydraulic Motor Drive (Available for all models)• Heavy-duty automatic alignment bracket• SAE B face 2 and 4 bolt flange• Coupler set • Properly sized hydraulic motor

607 Challenger Series Packages

607 Max PakAll features included in the Muffler Pak (please see previous page) plus:• High efficiency aluminum moisture trap• Accessible 6” stainless steel float ball • BUNA positive shut-off ball seat• 2” lever drain valve• Blind intake flange standard (other fittings available)• Vacuum/pressure relief valve and gauge

Each package is designed around our industry leading Challenger series vacuum pump and built in our state of the art fabrication facility featuring:

•Heavy duty 3/8 steel gusseted frames• Durable powder coat paint• Easily accessible maintenance points

• Properly sized components• Grade 8 fasteners

Pump Stand Complete (Available for fan cooled and liquid cooled models)• 400 series three-shaft gearbox accommodates clockwise and counterclockwise rotation• Coupler set with shear protection• Easy-align, adjustable gearbox bracket• Also available with hydraulic drive

607 Muffler PakAll features included in the Standard Mounting Pak plus:• Compact design square oil catch muffler• Stainless steel mesh filter• Removable Exhaust deflector (covering 3” NPT fitting)• All elbows, fittings and high temp hoses are factory connected• Right-hand or left-hand muffler location available

Hydraulic Motor Drive Adds 14” to Pump Length

Clockwise Shown

Counter Clockwise

Shown

Clockwise Shown

CounterClockwise

Shown

Additional mounting bracket required for liquid cooled model

607 Challenger Series Packages

Top of Frame Mount Package• Designed for side valve pump• Mounting bracket that includes 12” oil catch muffler with drain valve and remote oil tank• Balk head supported connection from vacuum tank

39 3/8”

39 3/8”

45 7/8”

1 1/4”4” TTMAFlange

27 1/2”

18”

28 7/16”

1

1

2

2

345678

8

A A

B B

C C

D D

NVE NationalVacuum

Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354

TOLERANCES UNLESS OTHER WISE SPECIFIED

One place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°Fractional (X/X) ±1/16All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.

This document may contain confidential tradesecret information which is the exclusive

property of National Vacuum Equipment. Anyinformation on this drawing is not to be

disclosed to anyone not having a "Need toKnow." The information contained herein is to

be used only in accordance with the bestinterests of National Vacuum Equipment.

PART NAME:

MATERIAL:

DRAWN BY:

SCALE:

CHECKED BY:

DATE:

ADT

PART NO.SHEET

2 117-607A-TM2-FS2 of

1 : 8

SEE BOM

APPROX. WT.CAD FILE LOCATION: I:\Engineering\CAD - Production\117-607A-TM2-FS.idw

SHEET SIZE D

607 TM PACKAGE

60 1/4"

42 3/4"

32 1/2"CENTER DISTANCE

2'-8 1/4"

2'- 3/4"

40"

1 1/2"Ø

1

1

2

2

345678

8

A A

B B

C C

D D

NVE NationalVacuum

Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354

TOLERANCES UNLESS OTHER WISE SPECIFIED

One place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°Fractional (X/X) ±1/16All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.

This document may contain confidential tradesecret information which is the exclusive

property of National Vacuum Equipment. Anyinformation on this drawing is not to be

disclosed to anyone not having a "Need toKnow." The information contained herein is to

be used only in accordance with the bestinterests of National Vacuum Equipment.

PART NAME:

MATERIAL:

DRAWN BY:

SCALE:

CHECKED BY:

DATE:

ADT

PART NO.SHEET

2 117-607A-TM2-FS2 of

1 : 8

SEE BOM

APPROX. WT.CAD FILE LOCATION: I:\Engineering\CAD - Production\117-607A-TM2-FS.idw

SHEET SIZE D

607 TM PACKAGE

60 1/4"

42 3/4"

32 1/2"CENTER DISTANCE

2'-8 1/4"

2'- 3/4"

40"

1 1/2"Ø

39 3/8”

39 3/8”

45 7/8”

1 1/4”4” TTMAFlange

27 1/2”

18”

28 7/16”

Dimensions reflect pump stand complete muffler pak, and max pak.

Bolts to side of truck frame

Hydraulic or Belt & Pulley

Available

DISTRIBUTED BY:

For over 25 years NVE has been providing quality vacuum system components to the liquid waste markets. From design, to development to product support, NVE IS the industry leader.

In addition to our team of engineers and highly qualified support staff, NVE has a state of the art machine shop, fabrication shop, and powder coat paint facility housed in two plants in Traverse City, Michigan. We also have a warehouse and sales support facility in Mansfield, Texas.

For questions and additional information please contact your dealer or NVE direct at 800.253.5500.

Thank you,

©2014 National Vacuum Equipment, Inc. | Revised 02/2014

607 Challenger Series Packages - Continued

Blower4310Series

Series

607-

SeriesVacuum pumps & Blowers

607 Belt Drive Deutz Engine Package• Rugged, low-profile frame for belly-mount applications• 45.6 HP Deutz power unit with tachometer and LOFA control panel• 23 gallon steel fuel tank• High efficiency oil catch muffler• 12 volt high crank capacity battery• Powder coat painted and factory assembled

Also Available With Pressure Washer!

607 Fan Cooled Side Valve Direct Drive• Fits between truck frame• Direct drive with P.T.O.• Stainless steel mud guard• Side valve for easy access

ISO VIEW

PARTS LISTDESCRIPTIONPART NUMBERQTYITEM

607 SIDE MANIFOLD, CCW FAN COOLED100-607A-FS11FLANGE ELBOW ALUM 3"120-063-00722607 BETWEEN FRAME MOUNT STAND280-355-02413GUARD SPLASH 607280-355-02514COUPLER HUB E20 1 1/2" BORE424-200-15015ELBOW, 3" STE CAST802-063-00526

FASTENERS (GRADE 8 YELLOW ZINC UNLESSS OTHERWISE NOTED)DESCRIPTIONPART NUMBERQTYITEM

NYLOCK NUT - 5_8 UNCNYLOCK NUT - 5_8 UNC4301FLAT WASHER - 5/8"FW - 5_88302HEX HEAD CAP SCREW - 5_8 X 2.25 UNCHHCS - 5_8 X 2.25 UNC4303

1

1

2

2

3

3

4

4

A A

B B

C C

D D

NVE NationalVacuum

Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354

TOLERANCES UNLESS OTHER WISE SPECIFIED

One place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°Fractional (X/X) ±1/16All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.

This document may contain confidential tradesecret information which is the exclusive

property of National Vacuum Equipment. Anyinformation on this drawing is not to be

disclosed to anyone not having a "Need toKnow." The information contained herein is to

be used only in accordance with the bestinterests of National Vacuum Equipment.

PART NAME:

MATERIAL:

DRAWN BY:

SCALE:

CHECKED BY:

DATE:

ADT

PART NO.SHEET

1 117-607A-0011 of

1 : 8

SEE BOM

APPROX. WT.CAD FILE LOCATION: I:\Engineering\Projects\1285-Projects for the Show\Cad

Data\607 Between Frame Mount\117-607A-001.idw

SHEET SIZE C565 LBS

607 FAN COOLED CCW SIDE VALVE BETWEENTHE FRAME MOUNT

REVISION HISTORYREV DATE DESCRIPTION APPROVED ZONEA 2/6/14 DRAWING CREATED ADT -

27 1/16"

45 1/2" 28 15/16"

34" 17 3/4"

3

1

4

NOTES:1) DURING ASSEMBLY, REMOVE (2) 120-063-367

ISO VIEW

PARTS LISTDESCRIPTIONPART NUMBERQTYITEM

607 SIDE MANIFOLD, CCW FAN COOLED100-607A-FS11FLANGE ELBOW ALUM 3"120-063-00722607 BETWEEN FRAME MOUNT STAND280-355-02413GUARD SPLASH 607280-355-02514COUPLER HUB E20 1 1/2" BORE424-200-15015ELBOW, 3" STE CAST802-063-00526

FASTENERS (GRADE 8 YELLOW ZINC UNLESSS OTHERWISE NOTED)DESCRIPTIONPART NUMBERQTYITEM

NYLOCK NUT - 5_8 UNCNYLOCK NUT - 5_8 UNC4301FLAT WASHER - 5/8"FW - 5_88302HEX HEAD CAP SCREW - 5_8 X 2.25 UNCHHCS - 5_8 X 2.25 UNC4303

1

1

2

2

3

3

4

4

A A

B B

C C

D D

NVE NationalVacuum

Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354

TOLERANCES UNLESS OTHER WISE SPECIFIED

One place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°Fractional (X/X) ±1/16All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.

This document may contain confidential tradesecret information which is the exclusive

property of National Vacuum Equipment. Anyinformation on this drawing is not to be

disclosed to anyone not having a "Need toKnow." The information contained herein is to

be used only in accordance with the bestinterests of National Vacuum Equipment.

PART NAME:

MATERIAL:

DRAWN BY:

SCALE:

CHECKED BY:

DATE:

ADT

PART NO.SHEET

1 117-607A-0011 of

1 : 8

SEE BOM

APPROX. WT.CAD FILE LOCATION: I:\Engineering\Projects\1285-Projects for the Show\Cad

Data\607 Between Frame Mount\117-607A-001.idw

SHEET SIZE C565 LBS

607 FAN COOLED CCW SIDE VALVE BETWEENTHE FRAME MOUNT

REVISION HISTORYREV DATE DESCRIPTION APPROVED ZONEA 2/6/14 DRAWING CREATED ADT -

27 1/16"

45 1/2" 28 15/16"

34" 17 3/4"

3

1

4

NOTES:1) DURING ASSEMBLY, REMOVE (2) 120-063-367

National VacuumEquipment

Traverse City MichiganMade In U.S.A.

Clean Filter Regularly350°F Max. Temp.

�������������������������������������

38”

30.68”

9.64”

29.59”

6”

60”

National VacuumEquipment

Traverse City MichiganMade In U.S.A.

Clean Filter Regularly350°F Max. Temp.

�������������������������������������

38”

30.68”

9.64”

29.59”

6”

60”