471 depliant ultra100bs gs 120b g en.unlocked
TRANSCRIPT
-
7/31/2019 471 Depliant Ultra100bs Gs 120b g en.unlocked
1/6
Ultra 100 BS-GS/120 B-G
The new generation of scrubbing machinesof large size and great performances
Available in the scrubbing-sweeping version of 100 cm
and scrubbing version of 120 cm
ScrubbingM
achines
-
7/31/2019 471 Depliant Ultra100bs Gs 120b g en.unlocked
2/6
Ultra 120 B
PLUS
Ultra 100 GS
Ultra 100 BS-GS/120 B-G.Suitable for maintenance and hard cleaning
of large areas up to 20,000 sq.m.
Ultra 100 BS-GS/120 B-G oer the ollowing
benefts:
Intuitive driving, thanks to the elegant newinstrumentpanelofautomotivecharacter;
Excellent autonomy, thanks to the signicanttankcapacity(280l.);
High brushes pressure that can be manuallyadjustedaccordingtothetypeofdirt;
Perfect drying, thanks to the power of thedoublevacuummotorandtothepresenceofthesuctionsystemonthebrushheadtoo;
Perfect cleaning along walls thanks to the
extractablesidebrush; Targeted cleaning operations, thanks to theCDS dosing system which allows separatemanagement of water and detergent supplyaccordingtothetypeofdirt.
Ultra 100 BS-GS/120 B-G are ride-on scrubbing
machines with automatic traction available in thebattery version and in the LPG-Gasoline version, withHonda spark-ignition engine o 9.5 Kw.They are available in the scrubbing-sweeping versionwith cylindrical brushes and 100 cm working width orin the scrubbing version with disc brushes and 120 cmworking width.They can be used to clean large suraces, also indoors,in public places like airports or railway stations.Ultra 100 BS-GS are equipped with a brush head withcylindrical brushes o dierent diameters, to increasethe efciency o the scrubbing and the sweeping action.
This version is equipped with a side brush able to comeout to reach the dirt deposited along walls and undershelves, and to convey it towards the centre where itwill be collected by the central brushes. In this way, it ispossible to avoid idle times o the machine or manualcleaning operations.
The powerul traction wheel allows the operatorto drive in total saety.Ultra scrubbing machines are equipped asstandard with an antiskid wheel and with a speedreduction device on bends, traction with A.C.control and carbon brushless motor
The brush head o scrubbing-sweeping versionis equipped with the side brush and withcylindrical brushes o dierent diameters,thanks to which it is possible to collect evensmall solid residuals and to convey them in adirt hopper. The hopper can beeasily emptiedat the end o cleaningoperations, taking it outrom the right side
Both models can be equipped withgasoline-LPG Honda engine: thanks to thisversion, with the same perormances,
working autonomy increases enabling to cleanareas up to 20-25,000 sq.m
-
7/31/2019 471 Depliant Ultra100bs Gs 120b g en.unlocked
3/6
Ultra 100 BS-GS/120 B-G.Excellent performance and productivity:
customized interventions to remove even the most stubborn dirt
Ultra 100 BS-GS/120 B-G.Unbeatable drying results
kg and it can be easily controlled by the specic
selector located on the instrument panel.It can remove even the most stubborn dirt thanksto the innovative brush head, made with a powerulcentral motor and brushes traction by belt.
Ultra 120 B-G are ride-on scrubbing machines
particularly suitable to perorm in very dirty areas, alsothanks to the possibility to choose the pressure level othe brushes.Brushes pressure on the foor can be adjusted onthree dierent levels o 133 kg, 150 kg and 168
Ultra 100 BS-GS/120 B/G scrubbing machinesguarantee excellent cleaning perormances thanks to: Doublesuctionmotorof36/670V/W;Suctionsystemlocatedonthebrushheadorinthe
debrishopper;
The scrubbing unit is equipped with two counter-rotating brushes and can laterally come out up to 15 cm (Ultra 120 B version)thankstoanextremelypracticaljoystick.Whenaccidentallyimpacted,thebrushheadswingsinautomaticallywithouttheneedo any command. To ensure the utmost saety, the rotation o the brushes and water fow are stopped when the machine is idle
Ultra 120 B-GThe V shaped side splash guardssystem on the brush head wasdesigned to convey the detergent
solution into the centre:this made it possible to installa compact squeegee that canguarantee, thanks to theV shaped splash guards,perfect drying even on bends
Suction system located on the brush head
-
7/31/2019 471 Depliant Ultra100bs Gs 120b g en.unlocked
4/6
Thanks to the CDS Comac water and detergent dosingsystem, solution saving up to 50% is ensured.
Upon request, Ultra can be equipped with the CDSwhich allows water and detergent dosing throughtwo separate devices, in order to clean any type of dirt
Fluid level indicator(version with CDS)
Ultra 100 BS-GS/120 B-G.User-friendly controls, maximum comfortand driving practicality for the operator
Separate water and detergent management
The central display allows the operator to control batterycharging frequency and to schedule maintenanceoperations.
The indicator lights on the instrument panel allow the
operator to clearly identify all the controls, thanks to theuse of universally recognized symbols taken from theautomotive industry.All warning red lights are located on the left side, whileall green lights related to functioning are located onthe right.
Full control of all machine functions,thanks to the innovative
instrument panel
The working program selector allows the operator to choose the type ofoperation most suitable for his/her needs:
Transfer, Drying, Scrubbing/Drying, Scrubbing only
Ultra 120 B is also quick in transfer operations (up to 8 km/h)and can be regulated with three different speeds:1) from 3.9 km/h2) from 5.7 km/h3) up to 8 km/h, mainly for transfer operations
Transfer
Drying
Scrubbing/drying
Scrubbing only
Ultra 120G - 100GSInstrument panelCombustion engine
-
7/31/2019 471 Depliant Ultra100bs Gs 120b g en.unlocked
5/6
In order to ensure a perect oor drying, the squeegeetube must be cleaned at the end o each working cycle.
This operation allows the suction motor to work in optimalconditions extending its lie cycle as well
Ultra 120 B was designed to oer the utmost accessibility to all components.Simply and quickly, the operator can perorm routinemaintenance operations on each part o the machine
Complete cleaning o the recovery tank, equipped with the typical drain outlet and an additionalopening o larger diameter to acilitate emptying during extraordinary maintenance operations
Ultra 120 B/G - Thanks to a system developed by Comac,the squeegee can be rotated by the operator till reachingthe horizontal position. This ensures a perect cleaningo the squeegee rubbers and an excellent constant drying
Very handy squeegee rubber disassembly.Special hinged hooks can be opened by a simple hammer hitallowing the operator to remove immediately the rubber
A simple device allows the quick fllingo the tank with clean water withoutthe presence o the operator
Ultra 100 BS-GS/120 B-G.Very simple routine maintenance operations
-
7/31/2019 471 Depliant Ultra100bs Gs 120b g en.unlocked
6/6
COMAC spaVia Maestri del Lavoro, 13
37059 Santa Maria di Zevio - Verona - ItalyTel. +39 045 8774222 - Fax +39 045 8750303
on line: www.comac.it - e-mail: [email protected]
Ultra100 BS
Ultra100 GS
Ultra120 B
Ultra120 G
970(1080)
970(1080)
1205
1205
55
55
133168
133168
36/aut.
gas./GLP aut.
36/aut.
gas./GLP aut.
280
280
280
280
285
285
285
285
8640
8640
9600
9600
207515691192
20751758
1192
203015601280
203017581280
830
933
760
863
36
Ultra 100 BS-GS/120 B-G
Technical data
TECHNICAL DATA Ultra 100 BS Ultra 100 GS Ultra 120 B Ultra 120 G
Debris hopper capacity l 40 40 - -
Squeegee width mm 1265 1265 1265 1265
Brush head side movement mm - - 150 150
Disc brushes (No.) mm - - 610 (2) 610 (2)
Cylindrical brushes x l mm 150-280 x 980 150-280 x 980 - -
Brushes rpm rpm 960-520 960-520 115 115
Brush motor V/W 36/2000 36/2000 36/2000 36/2000
Suction motor (No.) V/W (2) 36/670 (2) 36/670 (2) 36/670 (2) 36/670
Traction motor V/W 36/2000 36/2000 36/2000 36/2000
Suction vacuum mbar 190 190 190 190
Forward speed km/h 08 08 08 08
Batteries* V/Ah C5 36/480 - 36/480 -
Batteries weight (max) Kg 510 - 510 -
Motor power (petrol-powered) Kw - 9,5 - 9,5
Detergent tank capacity l 15 - 15 -(versions with CDS)
An ISO 9001:2008 Organisation certifed by Q.C.B. Italy
The machines are manuactured in compliancewith the directives 2006/42/CE, 2006/95/CE,2004/108/CE and with the standardsIEC 60335-1 and IEC 60335-2-72.
The steel parts are subject to treatmentwhich guarantees a long lie and makesthe parts oxidation-proo.
COMACSpareservestheright,atanytime,tomaketechnicaland/orequipmentmodifcationswithoutpriornotifcation.Theimagesareshown
asreerenceonlyandarenotbindingastotheactualdesignand/oreq
uipment.-CODE.301751-AA-03/2012-CopyrightCOMAC2011
Machineor industrialuse
Gas-poweredPetrol poweredmachine
B - Batterypowered machinewith voltage value
Workingwidth mm
(+ side brush)
Brushespressure
Power supply V/Traction
Solutiontank l
Recoverytank l
Workingcapacity up
to m2/h
Machinedimensions mm
L x H x W
Machineweight kg
(without batteries)
* Comac suggests the use of batteries with electrolyte level automatic control