48909109 hilti fs manual

Firestop SystemsGuide for Specifiers2007 Edition

Fir

esto

p S

yste

ms G

uid

e f

or

Sp

ec

ifie

rs

20

07

Ed

itio

n

In the US: P.O. Box 21148 Tulsa, OK 74121Customer Service: 1-800-879-8000en espaol: 1-800-879-5000Fax: 1-800-879-7000

www.us.hilti.com

Hilti is an equal opportunity employer.Hilti is a registered trademark of Hilti, Corp.Copyright 2007 by Hilti, Inc. (U.S.)H181 3427488 07/07 DBS

The data contained in this literature was current as of the date of publication. Updates and changes may be madebased on later testing. If verification is needed that the data is still current, please contact the Hilti Technical SupportSpecialists at 1-800-879-8000. All published load values contained in this literature represent the results of testingby Hilti or test organizations. Local base materials were used. Because of variations in materials, on-site testing isnecessary to determine performance at any specific site. Laser beams represented by red lines in this publication.Printed in the United States

*14001 US only

In Canada: 6790 Century Avenue, Suite 300CDN-Mississauga, Ontario L5N 2V8 Customer Service: 1-800-363-4458Fax: 1-800-363-4459

www.hilti.ca Saving lives through innovation and education.Hilti. Outperform. Outlast.

Engineering Judgment Request Form

Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide 2007

Hilti. Outperform. Outlast.

Hilti FirestopSaving Livesthrough innovationand education

Date submitted (MM/DD/YY)

Initiators Name

DDAATT or Phone Fax

Project Name

Contractor Contact

Phone Fax

TP Through Penetration1. Type and thickness of wall or floor penetrated:

2. Type and size of penetrating item(s):

3. Size and shape of opening:

If sleeved, specify type and size:

4. Annular space (min. and max.):

5. Fire rating (hrs.):

J Joint1. Type and thickness of wall or curtain wall

(include stud size for gyp):

2. Type and thickness of floor or floor/ceiling assembly

(include flute size):

3. Orientation of wall to floor/ceiling assembly (circle one):

Perpendicular Parallel

4. Type of joint system (circle one):

Floor-to-floor Floor-to-wall Top-of-wall

Wall-to-wall Curtain wall

5. Maximum width of joint:

6. Fire rating (hrs.):

Comments:

Fax completed form to Hilti Fire Protection Engineering Team for processing : 918-254-1679

l TP Through Penetration OR l J Joint

PROFIS Firestop



Hilti FirestopSaving Lives through innovation and education

Hilti Professional Integrated Software has been developed to aid in the

selection, specification and submittal of tested and approved Hilti

firestop systems that meet todays tough building codes.

PROFIS Firestop features:

Comprehensive, easy-to-use interactive system selector

Database of exportable, tested and approved firestop systems

drawings and installation instructions

Complete submittal builder feature which outputs a customized,

professional-looking submittal package that includes the following:

Cover page stating who the submittal was created for and the

project information

Table of contents

Product information page(s)

Certificate(s) of Compliance

System(s) drawings complete with installation instructions

Material Safety Data Sheet(s)

Specify and submit with confidence when using PROFIS Firestop. This

easy-to-learn, powerful software makes specifying and installing the

correct firestop systems for your project fast and accurate.

Introducing PROFIS Firestop

Hilti PROFIS Firestop software will be available soon!To request your free copy of this powerful software either:

Call your Hilti Customer Service Representative at 1-800-879-8000

Register online at www.us.hilti.com and email your request

OR

Contact your local Hilti Account Manager


Hilti. Outperform. Outlast.1

Firestop Design Center

Firestop specification made easy!

Access a state-of-the-art tool designed to make specification of Firestop even easier with the click of a mouse. Designed with you in mind,the Hilti Firestop Design Center makes solving application problems and downloading CAD-ready drawings easy.

Access our complete library of detailed drawings and specifications by registering today at www.us.hilti.com.

Once there, you will find:

Sample specifications

System drawings

Product information

Firestop terms and definitions

Building regulations and codes

Project references

Firestop FAQ

Additional Resources In-house, full-time degreed Fire Protection Engineers

Hilti Systems & Solutions Full Line Product Catalog

Hilti Product Technical Guide

Visit the Hilti Firestop Design Center Online today at www.us.hilti.com

(click on the Specification link under Planning & specifying)

Search by application: Joints or Through Penetrations

Design & Specification Resources System Drawing Search Featured New Products

1 2

34

Continuing Education CourseCourse name: Firestop A Life Safety Issue

Provides one hour of AIA and state credit

Qualifies for HSW

FREE

Presented by: Chad Stroike, CFPS, Hilti, Inc.

Description: Provides an overview of fire safe building construction,how to provide proper firestop protection via model building codes,and specifications. Proper and improper firestop installations, liabilityissues, and types of fire/smoke assemblies are also reviewed.

To take this course: www.aecdaily.com/en/1595881

Firestop Specialty Contractors

Chap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

s

2

Hawaii

Hilti Accredited Firestop Specialty Contractors*Hilti Fire Protection Specialists

A Hilti Accredited Firestop SpecialtyContractor (HAFSC) is an independent professionalfirestop installer who has been provided specializedtraining by Hilti; and who has committed to provide

building owners, generalcontractors, and subcontractorswith a full service solution for alltheir firestopping needs. When youchoose to use a Hilti AccreditedFSC, you are selecting a trainedfirestop installationspecialist committed to applyingproven Hilti firestopping technology

and innovation in your building to minimize the risk ofloss due to fire, smoke, and toxic gases.

Hilti Accredited FSCs useHilti firestop products,which eliminates theconfusion caused bynumerous subcontractorsinstalling different firestopproducts on the same job. This also providescontinuity throughout the job, which helps reduceyour liability exposure. Their professionalexpertise in installing the appropriate Hilti firestopsystem can provide significant savings potential in timeand cost to the general contractor and building owner.

During firestop inspections, Hilti Accredited FSCs canoffer documented, step-by-step accountability. Theirfirestop expertise helps assure building officials thatthe proper installation techniques have been appliedand that all installed systems comply with localand national codes.

CONTAINMENT

SUPPRESSIONDETECTION

Hospitals

Nursing Homes

Schools

Universities

Office Buildings

Apartment Complexes

Retail Centers

Telecom Switching Stations

Telecom Central Offices

Entertainment Complexes

Hotels

Petroleum Plants

Chemical Plants

Nuclear Power Plants

Pharmaceutical Plants

Military Complexes

For a Hilti Firestop Specialty Contractor near you, call 1-800-879-8000 today.

Through the Firestop Specialty ContractorProgram, Hilti trains professional contractors in fireprotection systems installation procedures of Hilti productsthat meet all current standards and codes. For Architects andSpecifiers this is great news. By using a Hilti AccreditedFirestop Specialty Contractor (HAFSC) you get factory-trained professionals who are knowledgeable aboutfirestopping methods and quality installations.

Selecting a HAFSC has the following benefits:

Allows tradespeople to focus on their area of expertise,leaving firestopping to passive fire protection specialists

Help ensure one-source continuity and systemcompatibility for all firestop applications

Promote hassle-free inspection by officials who know andtrust professional firestop installers

Provide single contractor accountability for all firestopapplications

Increase your confidence that all firestopping is completedcorrectly the first time

* Hilti Accredited Firestop Specialty Contractors are independent companies who have hademployees participate in the Hilti firestop training program.




3

Intro

ductio

nC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

s

Firestop Systems Guide

Introduction Page 3

Dedicated to Life Safety Page 4

Application Review, Products and Selection Chart Page 9

Firestop Systems Application Review Page 10Product Information & Installation Instructions Page 14

Product Ordering Information Page 37Selection Chart Page 44

Firestop System Drawings Page 58

Most Common Systems Directory Page 58Alpha-Numeric System Directory Page 511

Through-Penetration Drawings Page 60Joint Drawings Page 356

Estimating Tables & Technical Data Page 463

Estimating Tables Page 465Firestop Terms & Definitions Page 469

Understanding System Nomenclature Page 471Material Safety Data Sheet (MSDS) Page 472

UL Certificates of Compliance Sheets Page 506Terms and Conditions of Sale Page 510

Engineering Judgment (EJ) Process & Form Page 512

Dedicated to Life Safety

Intr

od

uctio

nC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

s




4

Hilti is dedicatedto saving lives throughinnovation andeducationThe quality and excellence of HiltiFirestop products help ensurethat fire, smoke and toxic gasesare contained to reduce the tragicloss of human life and property.Through a combination ofsuperior products, advancedknowledge and unparalleledcustomer service we are able toprovide the highest qualityfirestop systems.

Hilti offers a comprehensive support packageThroughout the entireFirestopping process, whether itis specification, installation orinspection, Hilti will be there tooffer job site support andexpertise. The Hilti highly trainedSales Force, Fire ProtectionSpecialists, and in-house FireProtection Engineering team canhelp you select the correctproducts and systems to matchyour specific project needs. Hiltihas a support package that isunmatched in the passive firestopindustry.

Fire safetyFire safety is a major concern for allwho are responsible for the design andspecification of new buildings.

The causes of fire are varied andunpredictable, and often outside thecontrol of the designer. What can becontrolled, however, is the effect of fireonce it has started.

The control of fire within a building isnormally affected by a combination ofactive and passive fire protection systems.

Active fire protection systemsActive fire protection systems are designedto detect fire, and either to extinguish it bymeans of water sprinklers, halogeninstallations or fire extinguishers, or tominimize its effects by smoke ventilation.Active systems are also used to assist theescape of occupants by the provision ofalarms and emergency lighting.

Passive fire protection systemsPassive fire protection is designed intothe structure of the building, so that iffire breaks out, it is contained within afire compartment, surrounded by fire-resistive walls and floors. For the wallsand floors to maintain their fire-resistance, however, every opening,penetration and joint must be sealedagainst the escape of fire and smoke.

Intumescent fire sealsThe materials used to form the seals mustnot only fill all gaps at the time ofconstruction, but also, in the event of fire,expand to close any further gaps formed bymelted components. These intumescent fireseals, if properly installed, can help preventfire escaping from a compartment for arating period of up to four hours. This timeperiod can prove vital in allowing occupantsto escape, and fire-fighters to control the fire.

HiltiAround the world the red Hilti toolbox isa familiar sight on building sites, andthe Hilti name is known and respected.

To most people Hilti means precision toolsand secure fastenings. For many years

however, Hilti has applied their skills to anew area of construction where precisionand security are vital: firestopping.

Hilti firestop systemsThe aim of Hilti firestop systems is toprovide designers and specifiers withthe following: excellence finished solutions

that match the well known, highquality standards associated with theHilti product

easy installation all firestopcomponents are readily available andsimple and fast to install

tested and used world wide Hilti offers one-stop firestoppingsystems tested in accordance withmost relevant regulations

wide ranging solutions forvirtually any opening or penetrationthrough which heat or smoke might pass,Hilti offers a firestop solution that will helpminimize damage in the event of a fire

Hilti and thedesigner/specifierTo assist the designer or specifier inselecting and specifying the appropriatefirestop system, Hilti has developed twotools; PROFIS Firestop and the onlineFirestop Design Center.

PROFIS Firestop is a professionallyintegrated software that guides youthrough the system selection process.Once the appropriate system isselected, the software generates aprofessional looking submittal packagewith all the necessary documents.

The online Firestop Design Centerallows you to access specification toolsand resources by application or byproduct names. To visit the onlineFSDC, go to www.us.hilti.com and clickon the Specifications link. Then, followthe Firestop Design Center link to theright of the page.

Hilti customized solutionsIf none of the standard firestop systemsmeet the requirements of the design,Hilti is ready to offer their expertise andwork with the designer to producecustomized solutions.

Fire Safety Issues



Intro

ductio

nC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

s

Problem The illustration on the left indicates a rangeof typical problems facing the designer.

Construction may consist of:

concrete wood gypsum

The problem areas are:

Movement jointsRigid or low movement jointsHead of wall and perimeter jointsMetal and plastic pipesPlastic pipesMultiple penetrations, pipes and/orcablesCable trays (with permanent sealingof opening during construction, ortemporary sealing allowing additionalcables to be installed subsequently)Cable trays (with permanent sealingof opening during construction)Cables (single or bundled)Electrical outlet boxesHeating/ventilation/air conditioning

Fire Resistance RatingTo help prevent the rapid spread of firewithin a building, certain walls, floorsand joints are required to meet a specificfire resistance rating the period oftime during which a building componenthas been tested to confine a fire orcontinue to perform a structural functionor both. Through-penetrations and jointscreated during the construction processrequire the installation of firestopsystems in order to bring the wall orfloor back up to its original fire-rating.

FirestoppingIt is essential that every penetration orjoint in a fire-rated wall or floor isadequately protected by sealing orfirestopping such that the buildingcomponent is restored to its original fire-rated condition in order to maintaincompartmentalization. The quality andexcellence of Hilti Firestop Products helpensure that fire, smoke and toxic gasesare contained to reduce the tragic lossof human life and damage to property.

11

10

9

8

7

6

5

4

3

2

1

3

7

11

3

8

96

1

4

5

2

10

Hilti Firestop Solutions

Intr

od

uctio

nC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

s



Hilti firestop systems are suitablefor use with constructions of:

Concrete or concrete blockGypsumWoodW

G

C

Hilti Firestop SolutionsFor each of the firestopping problems illustrated on the facingpage, Hilti has designed and tested a specific solution. Notonly is there a solution for each type of opening, but Hilti alsooffers a choice of firestop systems for several applications,according to the size of the opening and whether theinstallation is permanent or temporary.

Hilti Product Description Application F rating Page

Metallic & Non-metallic Pipes

CP 680-P/M Cast-in Firestop Device Metal and plastic pipes with diameters up to 6" up to 4 hours 14CP 620 Fire Foam Metal and plastic pipes (in conjunction with CP 648-E) up to 3 hours 24CP 644 Firestop Collar Plastic pipes with diameters 8" to 10" up to 2 hours 32CP 643N Firestop Collar Plastic pipes with diameters 6" or less up to 4 hours 31FS-ONE Intumescent Firestop Metal and plastic pipes up to 4 hours 20CP 604 Self-Leveling Firestop Sealant Metal pipes up to 3 hours 23CP 648-S Firestop Wrap Strip Single wrap for plastic pipes up to 3 hours 33

Cables & Cable Trays

CP 680-P/M Cast-in Firestop Device Cable bundles up to 3 hours 14CP 658T Firestop Plug Single or bundled cables up to 4 hours 30CP 675T Firestop Board Temporary and permanent sealing of cables and cable trays up to 2 hours 27CP 620 Fire Foam Permanent sealing of cables and cable trays up to 2 hours 24FS-ONE Intumescent Firestop Jacketed cables and cable bundles up to 4 hours 20FS 657 Fire Block Temporary and permanent sealing of cables and cable trays up to 4 hours 26CP 637 Firestop Mortar Permanent sealing of cables and cable trays up to 4 hours 25CP 618 Firestop Putty Stick Single or bundled cables up to 4 hours 29CP 617-L/XL Firestop Putty Pad Electrical boxes up to 2 hours 28CP 604 Self-Leveling Firestop Sealant Cable bundles up to 3 hours 23

Multiple Penetrations

CP 648-E Firestop Wrap Strip Continuous wrap for plastic pipes up to 4 hours 34CP 648-S Firestop Wrap Strip Single wrap for plastic pipes up to 2 hours 33CP 620 Fire Foam Permanent sealing of metal and plastic pipes, up to 2 hours 24

cables, and cable traysFS-ONE Intumescent Firestop Metal and plastic pipes, jacketed cables and cable bundles up to 3 hours 20FS 657 Fire Block Temporary and permanent sealing of metal up to 4 hours 26

and plastic pipes, cables and cable traysCP 637 Firestop Mortar Permanent sealing of metal and plastic pipes up to 4 hours 25

cables and cable traysCP 680-P/M Cast-in Firestop Device Multiple metallic and non-metallic pipes up to 3 hours 14CP 675T Firestop Board Temporary and permanent sealing of cables, cable trays up to 2 hours 27

and metal pipes

Heating / Ventilation / Air-conditioning

FS-ONE Intumescent Firestop Sealing around metal ducts up to 3 hours 20CP 601S Elastomeric Firestop Sealant Sealing around metal ducts up to 3 hours 21CP 606 Flexible Firestop Sealant Sealing around metal ducts up to 3 hours 22CP 604 Self-Leveling Firestop Sealant Sealing around metal ducts up to 3 hours 23

Joints/Curtain Walls

CP 606 Flexible Firestop Sealant Sealing floor joints, head of wall and wall to wall joints up to 3 hours 22CP 601S Elastomeric Firestop Sealant Sealing floor, head of wall and wall to wall joints up to 4 hours 21CP 604 Self-Leveling Firestop Sealant Sealing floor to wall joints (Perimeter/Curtain Walls) up to 2 hours 23CP 672 Speed Spray Sealing head of wall, wall to wall and floor to walls up to 4 hours 35

(Perimeter/Curtain Walls)CP 767/777 Speed Plugs/Speed Strips Provides non-combustible backing for FS sealants - 3614

13

9

7

7

9

7

7

7

11

1

4

3

7

8

12

12

9

6

5

4

3

7

8

11

10

1

12

9

7

2

2

8

1

Hilti Firestop Solutions




7

Intro

ductio

nC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

s

Hilti Firestop SolutionsThe illustration on the right provides abasic guide to the range of HiltiFirestop products available for theapplications shown

CP 680-P/M Firestop Cast-InDevice

CP 643N Firestop CollarCP 644 Firestop Collar FS 657 Fire BlockCP 637 Firestop MortarCP 618 Firestop Putty StickCP 617 / CP 617L / CP 617XLFirestop Putty PadFS-ONE High Performance

Intumescent SealantCP 601S Elastomeric Firestop

SealantCP 606 Flexible Firestop SealantCP 620 Fire FoamCP 604 Self-Leveling Firestop

SealantCP 658T Firestop PlugCP 675T Firestop BoardCP 648-E/S Firestop Wrap StripCP 672 Speed SprayCP 767 Speed StripsCP 777 Speed Plugs

14

13

12

11

10

9

8

7

6

5

4

3

2

1

7

4

85

12

6

3

11 13

14

9

7

77

10

1

2

9

9

Chap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

s

9Chap

ter T

ab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

s

Applications/Products

Firestop Systems Application Review Page 10

Product Information & Installation Instructions

CP 680-P Cast-In Firestop Device Page 14CP 680-M Cast-In Firestop Device Page 14

Height Extension Page 15Metal Deck Adapters Page 15Water Barrier Module Page 16

Top Seal Plug Page 16CP 681 Tub Box Kit Page 17

Closet Stub Page 18Shower and Floor Drain Page 19

Aerator Adapter Page 19FS-ONE High Performance Intumescent Firestop Sealant Page 20

CP 601S Elastomeric Firestop Sealant Page 21CP 606 Flexible Firestop Sealant Page 22

CP 604 Self-Leveling Firestop Sealant Page 23CP 620 Fire Foam Page 24

CP 637 Firestop Mortar Page 25FS 657 Fire Block Page 26

CP 675T Firestop Board Page 27CP 617, CP 617 L and CP 617 XL Firestop Putty Pad Page 28

CP 618 Firestop Putty Stick Page 29CP 658T Firestop Plug Page 30

CP 643N Firestop Collar Page 31CP 644 Firestop Collar Page 32

CP 648-S Firestop Wrap Strip Page 33CP 648-E Firestop Wrap Strip Page 34

CP 672 Speed Spray Page 35CP 777 Speed Plugs Page 36CP 767 Speed Strips Page 36

Hilti FACT Program Page 37

Product Ordering Information Page 38

Selection Chart Page 44

Product Information

Chap

ter

Tab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

s



Firestop SystemsApplication Review

Me

tal p

ipe

s

Pla

stic

/gla

ss p

ipe

s

Ca

ble

s/c

ab

le t

rays

Insu

late

d m

eta

l pip

es

Me

tal d

uc

ts

Mu

ltip

le p

en

etr

atio

ns

Join

ts

Application

See Page Description Features Benefits

CP 680-PCast-InFirestop DeviceA one-step cast-in firestopdevice for a wide varietyof pipe materials anddiameters

Quick and simple installation

Integrated moisture and smokeseal

Tested in concrete floorthicknesses from 2-1/2" (63 mm)

Innovative adapter for metal deckapplications

Ready to use no additionalcaulk required

Easy to specify, install and inspect

Cost effective solution

CP 680-MCast-InFirestop DeviceA one-step cast-in firestopdevice for a wide variety ofnon combustible pipematerials and diameters

Quick and simple installation

Integrated moisture and smokeseal

Tested in concrete floorthicknesses from 2-1/2" (63 mm)

Innovative adapter for metal deckapplications

Ready to use no additionalcaulk required

Easy to specify, install and inspect

Cost effective solution

HeightExtension For use with CP 680-P/M

One extension adds up to 6"

For concrete floors over 8"

Positive connection systempromotes a secure fit

Fast, modular installation

Color coded for easier topsidelayout

Metal DeckAdapters For use with CP 680-P/M

Positive connection systempromotes a secure fit to the base

Fast, modular installation

Color coded for easieridentification below deck

Water BarrierModule For use with CP 680-P/M

Available in 2", 3", 4" and 6" sizes

Adds 1" to the overall height

Secures to top of device

A pre-concrete casting waterbarrier solution

Many tested details meeting ULsClass I W-Rating

Top Seal Plug For use with 2 inch CP 680-P/M 1/2" to 2" diameter

pipes

Restricts water from flowingthrough pipe penetrations

Easy friction fit around pipes tocreate a water resistant seal

Forces pipe to be centered in theopening

A post-concrete casting waterbarrier solution

Many tested details meeting ULsClass I W-Rating (pending)

CP 681Tub Box KitA unique firestop cast-indevice for recessed tubdrain applications

Assembles easily with solventcement

Triangular shape makes workingaround rebar easy

3 fastening points instead of 4

Saves time and labor costs

Structurally stable during concretepouring

No special tools required forinstallation

14

14

15

15

16

16

17

Product Information



Chap

ter T

ab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

s


Me

tal p

ipe

s

Pla

stic

/gla

ss p

ipe

s

Ca

ble

s/c

ab

le t

rays

Insu

late

d m

eta

l pip

es

Me

tal d

uc

ts

Mu

ltip

le p

en

etr

atio

ns

Join

ts

Application


Closet Stub Cast-In device for toilet fixtures Durable PVC construction (ASTM

2665)

Material can be attached to pipesvia solvent welding or glue

Economical, dependable solutionfor toilets

Shower andFloor Drain

Cast-In device for shower/floordrains

Material can be attached to pipesvia solvent welding or glue

Economical, dependable solutionfor drains

AeratorAdapterUsed in Combinationwith CP 680-P/M forfirestopping aeratorapplications

Allows for vertical/horizontal and angle movement

FS-ONE HighPerformanceIntumescent Firestop SealantA water-based intumescentfirestop sealant, designed toexpand when exposed toheat

UL Listings for various penetratingitems

Several 1/4" depth systems

Available in foil pack (600 ml)

One product to specify, purchaseor inspect for most applications

Low cost per penetration

Quick and simple installationprocedure

sodfm,ev iJdjfiwhriuh. NoWE

Z8Z23awp3i4e0288u27uze

4i5kirdwiloi4jtf-x-.vbvbvh, ireiv

u9+12oeoo

tlke09^)&(/R 84tc )v 6453

CP 601SElastomericFirestop SealantA single componentsilicone firestop sealantfor joint and throughpenetration applications

Silicone based formula

1/4" depth systems


Meets 500 cycle requirements injoint applications (ASTM E 1966 &UL 2079)

Allows for movement andvibration

Cost effective solutions

Fast and easy dispensing

Smoke, fume and water resistant

Meets Class 1 W Ratingrequirements

CP 606 Flexible Firestop SealantAn acrylic based firestopsealant for throughpenetration applications

Acrylic based formula

Can be painted


Meets 500 cycle requirements (ASTM E 1966 & UL 2079)

Fast and easy clean-up with water

Allows for excellent finishedappearance

Fast and easy dispensing

CP 604Self-LevelingFirestop SealantA self-leveling, single-component, silicone-basedfirestop sealant for use withthrough-penetrations aswell as construction jointsin floors

1/4" depth systems

Excellent elongation/compressionproperties

Resistant to smoke, fumes andwater



No tooling required

Meets Class 1 W Ratingrequirements

Creates a void in concrete thatallows for simple and flexibleinstallation

Available for 3" and 4" cast-inplace devices

18

19

19

20

21

22

23

Product Information

Chap

ter

Tab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

s




Me

tal p

ipe

s

Pla

stic

/gla

ss p

ipe

s

Ca

ble

s/c

ab

le t

rays

Insu

late

d m

eta

l pip

es

Me

tal d

uc

ts

Mu

ltip

le p

en

etr

atio

ns

Join

ts

Application


CP 620Fire FoamUniversal firestoppingsolution for commonconstruction materials.Can also be used inconjunction with CP 648EWrap Strip

One stop application

Virtually impervious to smoke

Fully cures in approximately 1minute

No additional materials required

High yield

One solution for various applications Easy handling for difficult to reach

applications Excellent mold resistance Meets Class I W Rating requirements

sodfm,ev iJdjfiwhriuh. NoWE4i5kirdwiloi4jtf-x-.vbvbvh, ireivu9+12oeoo

CP 620 Brandschutzbeschichtung

CP 637Firestop MortarA dry powder, when mixedwith water forms apourable, trowelablefirestop mortar. Can alsobe used in conjunctionwith CP 648E Wrap Strip

Some applications require minimum 2-1/2" depth

Cleans up with water

Economical and simple to use

Fast and easy clean-up

FS 657 Fire BlockAn innovative and simple to install firestop blockdesigned to expandwhen exposed to heat

Soft flexible design

Easy to cut and shape

User friendly UL systems

Innovative designs

Non-curing

Easy to install, reuse andrepenetrate

Simply trim block to fit aroundpenetrating items

Reduces need for extra labor,tools and parts

Easiest solution for large openingswith multiple penetrations

CP 675TFirestop BoardwithAccessoriesReady to use FirestopBoard designed for largeopenings with cable traysand multiple penetrations

Lightweight design

Variety of tested systems

Systems for one-sided installation

Easy to install; can be cut withoutpower tools

Solutions for low and highpenetrated openings

Solutions for access impededareas

CP 617, CP 617 Land CP 617 XLFirestop Putty PadAn intumescent puttysheet designed to helpprotect electrical outletboxes

Pad sizes 6" x 7", 7" x 7" or 9" x 9"

1 & 2 hour systems

Tested for wood and steel studs

Fits most common electricalboxes (refer to UL listings)

Only one pad to stock and install

Can be used for commercial andresidential applications

CP 618Firestop Putty StickAn intumescent puttywhich remains pliable overtime

Non-curing

No volatile solvents

Flexible, moldable product

Reusable and easily repenetrated

Approved for combustiblepenetrations (cables) along withconduit, EMT and steel pipe

CP 658TFirestop PlugA pre-sized, intumescentfirestop plug for blankopenings and cablepenetrations

Soft Flexible Design

Versatile in use

Non-curing

Fast and cost effective installation

Provides temporary or permanentfire protection

Reusable

* When used with CP 645 or CP 648E Wrap Strip

24

25

26

27

28

29

30

Product Information



Chap

ter T

ab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

s


Me

tal p

ipe

s

Pla

stic

/gla

ss p

ipe

s

Ca

ble

s/c

ab

le t

rays

Insu

late

d m

eta

l pip

es

Me

tal d

uc

ts

Mu

ltip

le p

en

etr

atio

ns

Join

ts

Application


CP 643NFirestop CollarA ready-to-use firestopdevice designed tocollapse plastic pipepenetrations whenexposed to fire conditions

Ready-to-use out of package

Adjustable mounting tabs

Low profile design

Simple and quick installation

Flexibility in positioning of collar

Allows for correct installation intight areas

. NoW

E

8u27 uz

e

bvbvh,

ireiv

utzma

nsch

.

CP 644Firestop CollarA ready-to-use firestopdevice designed tocollapse plastic pipepenetrations whenexposed to fire conditions

Ready-to-use out of package

Adjustable mounting tabs

Simple and quick installation

Flexibility in positioning of collar

Allows for correct installation intight areas

sodfm,ev

iJdjfiwhriu

h. NoWE

Z8Z23aw

p3i4e0

288u27u

ze

4i5kirdw

iloi4jtf-x-.

vbvbvh, irei

vCP 642

Brands

chutzm

ansch.

CP 648-SFirestop Wrap StripAn intumescent, flexiblefirestop wrap for plasticpipe penetrations

Pre-measured no cuttingrequired

Integrated fastening tape

No special tools required

CP 648-EFirestop Wrap StripAn intumescent, flexiblefirestop wrap forplastic and insulated pipepenetrations

May be continuously wrapped

Flexible

Versatile

No need to measure each layer formulti-wrap applications

Easy to use

May be used inside the annularspace or outside of the substrate

iwhriuh

. NoW

E

4e028

8u27 uz

e

f-x-.vb

vbvh, ir

eiv

ndsc

hutzm

ansc

h.

CP 672 Speed SprayA flexible fire-rated masticfor construction jointswhere movement up to50% is expected

Water based formulation

Maximum flexibility

Can be used with many standardtexture spray equipment


Fast and easy clean-up

No special modification or extraexpense for product application

FirestopSystem

CP 777 Speed PlugsPre-cut flute configurationfor top of wall firestopping

CP 767 Speed StripsPre-cut mineral wool stripssuitable for joint applications

Pre-cut

Superior finish

Safe to use

User friendly

Leaves no gaps or voids

Smooth surface provides cost effective spray coverage

No asbestos

Inorganic will not mildew

Up to 60% faster than castlecutting

14-15

Easy installation

User friendly

Saves time and labor costs

31

32

33

34

35

36

Product Information

Chap

ter

Tab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

s




14

CP 680-P and CP 680-M Technical DataID Footprint Opening Required thru Metal Deck2" 3-3/4" x 4-1/2" 3-1/2" diameter3" 4-3/4" x 5-5/8" 4-1/2" diameter4" 6-3/8" x 6-3/4" 5-1/2" diameter6" 9" x 9-1/2" 7-1/4" diameterExpansion temperature 392F (200C)Expansion rate 1:50 (unrestrained)

1:30 (Load expansion, Load = 20g/cm3)Standard Height 8"Temperature resistance Maximum 212F (100C)Color CP 680-P: red

CP 680-M: black ApprovalsCalifornia State Fire Marshal Listing No. 4485-1200:135, 4485-1200:136City of New York MEA 1-07-M, MEA 2-07-M Tested in accordance with UL 1479

ASTM E 814 ULC-S115

Internationally tested and approved

FMAPPROVED

F

For use in Dust and fiber free environments such as hospitals, computer

centers and laboratories

Concrete floor assemblies rated up to 4 hours

Product Description A one-step cast-in firestop device for a variety of pipe materials

and diameters

Helps reduce labor costs and increase productivity

Ready-to-use out of the package

Internationally tested and approved by UL and FM

Reduces the chance of project delays due to failed inspections

Product Features Quick & simple installation

SpeedLine Alignment system promotes faster layout

QuickTurn System creates fast, simple vertical connections

Integrated moisture and smoke seal

Innovative adapter for metal deck applications

Installation & Applications Concrete floors from 2.5" (63 mm) thickness for either flat concrete

or concrete over metal deck

CP 680-M:

- Insulated and non-insulated metal pipes

- EMT and electrical conduits

- Cable bundles

- Multiple pipes

CP 680-P:

Addresses all applications for CP 680-M as well as the following:- Plastic pipes such as PVC, CPVC, ABS, ENT and FRPP

- Fresh and waste water pipes

Not suited for Areas with high condensation

Outdoor areas

Wall applications

CP 680-P and CP 680-M Cast-In Firestop Devices

Notice Before handling, read Material Safety DataSheet and

product label for safe usage and health information.

Instructions below are general guidelines alwaysrefer to the applicable drawing in the UL FireResistance Directory or Hilti Firestop Systems Guidefor complete installation information

Instructions for use Before pouring concrete, secure the cover cap in

place, thereby preventing the flow of concrete intothe cast-in device.

Do not use for wall applications.

Concrete floor with metal decking For concrete floor with metal decking applications usethe correct size CP 680 Metal Deck Adapter forinstalled cast-in device and follow the illustrations.

Concrete floor

Installation optionFollow the illustrations if CP 680 has to be cut to slabthickness before installation, or when riser clamps areused.

Installation Instructions

FIRESTOP DEVICEFOR USE IN THROUGH-PENETRATION

FIRESTOP SYSTEMSSEE UL FIRE RESISTANCE DIRECTORY

5N76

CP 680-P over metaldeck

CP 680-P in concrete over wood forms

CP 680-M over metaldeck

CP 680-M in concrete over wood forms

1

1 2

1 2

3 4

5 6

2

3 4

Product Information




15

Chap

ter T

ab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

s


Height Extension

Metal Deck Adapters

Product Description For use when concrete slabs are greater than 8" thick

Device may add up to 6" with each extension kit

QuickTurn Connection system promotes a fast, positiveconnection to the top of the appropriate cast-in device

Red (CP 680-P) and Black (CP 680-M) versions create for easieridentification when both combustible and non-combustiblepenetrants are employed for the same project

Color CP 680-P Kit Red cylinder with Red coupling band

CP 680-M Kit Black cylinder with Red coupling band

Product Description For use with concrete over metal deck applications

6" cylinder extension protrudes through even the thickest sprayfireproofing

QuickTurn Connection system promotes a fast, positiveconnection to the underside of the appropriate cast-in device

Red (CP 680-P) and Black (CP 680-M) versions create for easieridentification when both combustible and non-combustiblepenetrants are employed for the same project

Opening Required to Place the Cylinder Through a Metal Deck

For 2" Devices 3-1/2" diameter




Color CP 680-P Kit Red cylinder with two (2) metal plates

CP 680-M Kit Black cylinder with two (2) metal plates

Notice Before handling, read Material Safety DataSheet and product

label for safe usage and health information.

Instructions below are general guidelines always refer to theapplicable drawing in the UL Fire Resistance Directory or HiltiFirestop Systems Guide for complete installation information





Product Information

Chap

ter

Tab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

s




16

Water Barrier Module

Top Seal Plug Product Description A post-installed water barrier solution that impedes water

Meets W-Rating requirements for select penetrants

For use where a single penetrant is employed per cast-in device

Chemically stable elastomeric material will not react withcombustible pipes

Applications For single penetrants placed through a 2" cast-in place device

Iron Pipe Sizing (IPS) and Copper Pipe Sizing (CPS) offeringsavailable

For pipes ranging from nominal 0.5" to 2.0" in diameter

Color Red

Product Description A pre-installed water barrier solution that impedes water

Meets W-Rating requirements for select penetrants

For use where a single penetrant is employed per cast-in device

QuickTurn Connection system promotes a fast, positiveconnection to the top of the appropriate cast-in device

Dimension Adds 1" to all cast-in devices

Pipe Sizes Addressed (See UL Systems) For 2" Water Module: 2" Pipe

For 3" Water Module: 2.5" and 3" Pipe

For 4" Water Module: 4" Pipe

For 6" Water Module: 6" Pipe

Color Red housing with black gasket

(Pending)(Pending)









Product Information




17

Chap

ter T

ab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

s

CP 681 Tub Box Kit

FIRESTOP DEVICEFOR USE IN THROUGH-PENETRATION


5N76

Technical DataDimensions (LxWxH) 10-3/4" x 13" x slab thicknessApplication dimension Creates a 2-1/2" deep recess in the slabMinimum slab thickness 4-1/2"Intumescent activation Approx. 375F (190C)Expansion ratio (unrestricted) 1:10Temperature resistance Maximum 212F (100C)Color Red with white PVC legs and couplingStorage Store in dry locationApprovalsCalifornia State Fire Marshall Listing No. 4485-1200:122City of New York MEA 283-06-ETested in accordance with UL 1479

ASTM E 814

The Hilti cast-in solutions include an innovative tubbox solution Structurally stable stable during concrete pouring

Assembles easily with solvent cement no additional toolsrequired

Triangular shape makes working around rebar easy

3 fastening points instead of 4 reduces installation time

Pre-cut to customers height requirement upon request helpsreduce labor costs

One system for all pipe materials, easy to choose and inspect

Accepts a pass through 1-12" pipe (with a sealing bushing) or astandard 2" P-trap (direct connection to the coupling)

The CP 681 Tub Box Kit includes an ElastomericSealing Bushing Sealing bushings available for standard schedule 40 pipe or thin

wall piping

Versatile CP 681 tub box kit allows sealing bushing to be installedfrom top or bottom

Assembly & Installation instructions for CP 681 Tub Box KitNotice Before handling, read Material Safety DataSheet

and product label for safe usage and healthinformation.


Concrete on wood form 1. Secure the coupling sleeve flange (the larger of the

three flanges) to the floor deck using nails orscrews.

2. Using standard solvent cement on both plasticsurfaces, assemble the CP 681 Tub Box legs andsleeve to bottom of the Tub Box as follows:

Cement the two 3/4" PVC stabilizing legs to thematching connecting area on the bottom side of theCP 681 Tub Box.

Cement the CP 681 Tub Box and larger PVC plasticsleeve to the connecting area on the bottom side ofthe CP 681 Tub Box.

Secure the smaller leg flanges to the deck usingnails or screws.

3. Pour concrete to the proper height. CP 681 Tub Boxassembly is precut to the slab thickness.

4. After concrete is cured, remove the floor deck andfoam insert. Remove pressure test cap beforeinstalling drain piping.

5. Install the tub drain/overflow assembly piping(plastic or brass) through the CP 681 Tub Box andplastic coupling. Insert proper elastomeric bushinginto the bottom or top of the CP 681 Tub Boxassembly around the drain pipe.

Note: Install bushing before final drain/overflowassembly if installing from the top side. Completethe installation by installing branch and trap piping.

1 2 3 4 5

Product Information

Chap

ter

Tab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

s




18

Closet StubProduct Description A coupling device designed to address cast-in applications for

toilet fixtures

Material can be solvent welded to PVC piping

Available for 3" and 4" PVC applications

Product Dimensions (Diameter x Height) 3": 5-11/16" x* 3-1/8"

4": 6-3/4" x* 3-5/8"

Application Dimensions 3": 3-1/2" inner diameter (for use with 3" PVC pipe)

4": 4-1/2" inner diameter (for use with 4" PVC pipe)

Minimum Slab Thickness 6"

Color Red




Hilti Firestop Closet Stubassembly concrete on woodform for floors A: Hilti Cast In Firestop Closet Stub

B: 3" or 4" PVC SCH 40 pipe (supplied by others)

C*: 3" or 4" Toilet Flange (supplied by others)

1. Secure the Hilti Cast-In Firestop Closet Stub to thefloor deck, using nails or screws. Pre-assemble A &B by solvent welding.

2. Close the top of the assembly to avoid concretefilling (tape or similar).

3. Pour concrete to proper height. After concrete iscured, remove the floor deck and tape.

4. Complete installation by installing Toilet Flange andelbow by solvent welding.


1 2 3 4

Product Information




19

Chap

ter T

ab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

s

Shower and Floor Drain

Aerator Adapters

Product Description An economical solution to address shower and floor drain

applications

The same trusted firestop material as the tub box

Two variations: (1) extended sleeve & (2) hub coupling

Designed to accommodate solvent welding to 2" PVC pipes

Product Dimensions Extended Sleeve: 5-3/4" base diameter 8" height

Hub Coupling: 5-3/4" base diameter; 2-13/16" height

Application Dimensions Extended Sleeve: 2-3/8" inner diameter (for use with 2" PVC pipe)

Hub Coupling: 2-3/8" inner diameter (for use with 2" PVC pipe)

Minimum Slab Thickness 4-1/2"

Color Extended Sleeve: red flange with white extended sleeve

Hub Coupling: red flange with white hub coupling

Aerator-Adapter Technical DataProduct Dimensions (WxLxH) 3": 6" x 6-7/8" x 3"

4": 6" x 8-3/4" x 4-1/2" Application Dimensions (WxLxH) 3": 5-3/4" x 2-3/8"

4": 5-7/8" x 7.5" x 4-1/2" Minimum Slab Thickness 3": 5-1/8"

4": 6-1/2" Color 3": Red

4": RedStorage Store in dry locationTested in Accordance with UL 1479

ASTM E 814

Product DescriptionWhen used in conjunction with the appropriate cast-in place device,creates an underside void for the installation of a single stack wastepipe aerator system

Product Features Up to a 4-1/2" recess created in the slab to reduce final ceiling

height

Allows for vertical, horizontal and angle movement to simplifyplumbing installations

Excellent sound insulation

For Use With Soil and Aerator assemblies




Note: Before purchasing aerator adapters for yourproject, please confirm the following:

aerators may be employed on the project as perlocal codes and construction allowances

minimum concrete floor slab thickness

1. Secure the assembly to the floor deck using nails orscrews.

2. Attach the Aerator Adapter to the appropriatecast-in place device.

3. Before pouring concrete, confirm that the cover capof the assembly is properly secured. This willprevent flowing concrete into the CP 680-P/Mduring the concrete pour.

4. Complete installation by installing 3" or 4" cast ironaerator and pipe.

Assembly instructions for Aerator Adapter

1 2 3 4

Product Information

Chap

ter

Tab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

s



sodfm,ev iJdjfiwhriuh. NoWE

Z8Z23awp3i4e0288u27uze

4i5kirdwiloi4jtf-x-.vbvbvh, ireiv

u9+12oeoo

tlke09^)&(/R 84tc )v 6453

FS-ONEHigh Performance Intumescent Firestop Sealant

FS-ONE Technical DataChemical basis Water-based intumescent acrylic

dispersionColor RedApplication temperature 40F to 104F (5C to 40C) Skin forming time Approx. 20-30 min.Curing time Approx. 2 mm / 3 daysMovement capability Approx. 5%Expansion rate Up to 3-5 times (unrestricted): original volumeTemperature resistance (cured) 40F to 212F (40C to 100C)Surface burning characteristics Flame Spread: 0(ASTM E 84-96) Smoke Development: 5Sound transmission classification 56 (Relates to specific construction)(ASTM E 90-99) ApprovalsCalifornia State Fire Marshal Listing No. 4485-1200:108City of New York MEA 326-96-M Vol. IVTested in accordance with UL 1479

ASTM E 814 ASTM E 84

At 73F (23C) and 50% relative humidity

FILL, VOID OR CAVITY MATERIALFOR USE IN THROUGH-PENETRATION


66Y7

FMAPPROVED

F

Product description Intumescent (expands when exposed to fire) firestop sealant that

helps protect combustible and non-combustible penetrations forup to 4 hours fire rating

Product features Smoke, gas and water resistant after material has cured

Contains no halogen, solvents or asbestos

High fire rating properties

Water based, easy to clean

Protects most typical firestop penetration applications

Can be painted

Single component systems available

Meets LEED requirements for indoor environmental quality credit4.1 Low Emitting Materials, Sealants and Adhesives and 4.2 Paintsand Coatings

Areas of application Steel, copper and EMT pipes

Insulated steel and copper pipes

Cable bundles

Closed or vented plastic pipes

HVAC penetrations

For use with Concrete, masonry, drywall and wood floor assemblies

Wall and floor assemblies rated up to 4 hours

Examples Sealing around plastic pipe penetrations in fire rated construction

Sealing around combustible and non-combustible penetrations infire rated construction

1. Clean opening. 2. Pack mineral wool.(If required)

3. Apply FS-ONE. 4. Smooth FS-ONE.

5. Leave completedseal undisturbed for 48hours.

6. Fasten identificationplate (if required).

1. Clean opening. 2. Pack mineral wool.(If required)

3. Apply FS-ONE. 4. Smooth FS-ONE.

5. Leave completedseal undisturbed for 48hours.

6. Fastenidentification plate (ifrequired).

FirestopSystem




Opening 1. Clean the opening. Surfaces to which FS-ONE will be

applied should be cleaned of loose debris, dirt, oil,moisture, frost and wax. Structures supportingpenetrating items must be installed in compliancewith local building and electrical standards.

Application of firestop sealant 2. Install the prescribed backfilling material type and

depth to obtain the desired rating (if required). Leavesufficient depth for applying FS-ONE.

3. Application of firestop sealant: Apply FS-ONE to therequired depth in order to obtain the desired fire rating.Make sure FS-ONE contacts all surfaces to providemaximum adhesion. For application of FS-ONE use astandard caulking gun, foil pack gun, bulk loader andbulk gun. With FS-ONE buckets, Graco type sealantpumps may be used. (Contact pump manufacturer forproper selection).

4. Smoothing of firestop sealant: To complete the seal,tool immediately to give a smooth appearance.Excess sealant, prior to curing, can be cleanedaway from adjacent surfaces and tools with water.

5. Leave completed seal undisturbed for 48 hours.

6. For maintenance reasons, a penetration seal couldbe permanently marked with an identification plate.In such a case, mark the identification plate andfasten it in a visible position next to the seal.

Not for use High movement expansion joints

Underwater

On materials where oil, plasticizers or solvents maybleed i.e. impregnated wood, oil based seals, greenor partially vulcanized rubber

In any penetration other than those specificallydescribed in this manual or the test reports

Storage Store only in the original packaging in a location

protected from moisture at temperatures between 40F (5C) and 86F (30C)

Observe expiration date on the packaging

Installation instructions for FS-ONE

FirestopSystem

FirestopSystem

CA

BLE

PIP

E

Product Information

Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com en espaol 1-800-879-5000 Hilti Firestop Systems Guide 2007 21

Chap

ter T

ab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

s

CP 601SElastomeric Firestop Sealant

CP 601S Technical DataChemical basis Natural Elastic siliconeDensity Approx. 1.25 g/cm3

Color RedApplication temperature 40F to 104F (5C to 40C)Skin-forming time Approx. 15 min.Curing rate Approx. 2 mm / 3 daysVolume shrinkage Approx. 0 5%Movement capability Approx. 25%Temperature resistance 40F to 320F (40C to 160C)Surface burning characteristics Flame spread: 0(ASTM E84-96) Smoke development: 30Sound transmission classification 50 (Relates to specific construction)(ASTM E 90-97): ApprovalsCalifornia State Fire Marshal Listing No. 1451-1200:115

Listing No. 1452-1200:113Listing No. 4485-1200:123

City of New York MEA 101-99-M, Vol. IVTested in accordance with UL 2079 ASTM E 814

ASTM E 1966 ASTM C 920 UL 1479 ASTM E 84



FIRESTOP SYSTEMS AND JOINT SYSTEMS

SEE UL FIRE RESISTANCE DIRECTORY 66Y7

FMAPPROVED

F

Product description A silicone based firestop sealant that provides maximum

movement in fire-rated joint applications and pipe penetrations

Product features Halogen and solvent free

Asbestos free

Simple to use and apply

Good adhesion without use of a primer

Smoke, fume, water, weather and UV resistant

Excellent movement capability, meets 500 cycle requirements

(ASTM E 1966 & UL 2079)

Meets Class I W-rating requirements


Areas of application Sealing construction/expansion joints

Top-of-wall joints

Metal pipes

Cable bundles

HVAC penetrations

For use with Various base materials such as masonry, concrete, metal, glass, etc.


Examples Where a gypsum wall assembly meets the underside of a metal or

concrete deck

Sealing expansion joints to impede the passage of fire, smoke andtoxic fumes

Sealing HVAC penetrations through fire-rated assemblies




Opening 1. Clean the opening. Surfaces to which CP 601S will

be applied should be cleaned of loose debris, dirt,oil, wax and grease. The surface should bemoisture and frost free.

Application of firestop 2. Insert fill of mineral wool (or backer as required).

3. Apply firestop over backer.

4. Smooth firestop sealant with a trowel before theskin forms. Once cured, CP 601S can only beremoved mechanically.

5. For maintenance reasons, a penetration seal can bepermanently marked with an identification plate andfastened in a visible position next to the seal.

Chemical resistance At room temperature the cured silicone sealant is

resistant for a short time to diluted (15%) acids andlyes/alkalis as well as most commercially availablecleaning agents and disinfectants (except thosecontaining iodine).

Concentrated acids and lyes/alkalis destroy siliconerubber over time.

Solvents and mineral oils cause cured silicone toswell. Consequently, proper functioning of thesealant should be checked after exposure to asolvent or mineral oil. Please contact your local salesrepresentative or the nearest Hilti center if specialrequirements for chemical resistance have to be met.

Not for use In areas immersed in water

Not to be painted


protected from moisture at a temperature of 40F to77F (5C to 25C)

Observe expiration date on packaging

Installation instructions for CP 601S

1. Clean opening 2. Insert backingmaterial

3. Apply CP 601S 4. Smooth CP 601S 5. Fasten identificationplate (if required)

1. Clean opening 2. Insert backing

material

3. Apply CP 601S 4. Smooth CP 601S 5. Fasten identificationplate (if required)

FirestopSystem

FirestopSystem

JO

INT

DU

CT


Product Information

Chap

ter

Tab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

s




22

CP 606Flexible Firestop Sealant

CP 606 Technical DataChemical basis Acrylic based firestop sealantColor Available in red, white and grayApplication temperature 40F to 104F (5C to 40C)Skin-forming time Approx. 15 minCuring time Approx. 3 mm / 3 daysVolume shrinkage Less than 20%Movement capability Approx. 10%Temperature resistance 22F to 176F (30C to 80C)Surface burning characteristics Flame Spread: 0(ASTM E 84-96) Smoke Development: 5Sound transmission classification 56 (Relates to specific construction)(ASTM E 90-99) ApprovalsCalifornia State Fire Marshal Listing No. 1452-1200:112

Listing No. 1451-1200:121Listing No. 4485-1200:132

City of New York MEA 100-99-M, Vol. IVTested in accordance with UL 2079 ASTM E 814

ASTM E 1966 ASTM E 84 UL 1479


FMAPPROVED

F


FIRESTOP SYSTEMS AND JOINT SYSTEMS


Product description An acrylic based firestop sealant that provides movement

capability in fire rated joints and seals through penetrationsapplications

Product features Silicone free

Halogen, asbestos and solvent free

UV-resistant

Paintable



Easy clean up with water

Single component systems available



Top-of-wall joints

Metal pipes

Cable bundles

HVAC penetrations

For use with Various base materials such as masonry, concrete, metal, etc.


Examples Where a gypsum wall assembly meets the underside of

a metal or concrete deck

Sealing expansion joints to impede the passage of fire, smoke andtoxic fumes

Sealing around HVAC penetrations through fire-rated assemblies




Opening1. Clean the opening. Surfaces to which CP 606 will


Application of firestop2. Insert fill of mineral wool or backer (as required).


4. Smooth firestop sealant with a trowel before theskin forms. Once cured, CP 606 can only beremoved mechanically.

5. For maintenance reasons, a penetration seal can bepermanently marked with an identification plate andfastened in a visible position next to the seal.

Not for use On areas immersed in water


protected from moisture at a temperature of 40F to77F (5C to 25C)

Observe expiration date on package

Installation instructions for CP 606

1. Clean opening 2. Insert backingmaterial compressedper UL System

3. Apply CP 606 4. Smooth CP 606 5. Fasten identificationplate (if required)

1. Clean opening 2. Insert backingmaterial

3. Apply CP 606 4. Smooth CP 606 5. Fasten identificationplate (if required)

FirestopSystem

FirestopSystem

JO

INT

DU

CT

Product Information




23

Chap

ter T

ab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

s

Product description Self-leveling, single-component, silicone-based firestop sealant for

use with through-penetrations as well as construction joints infloors.

Product features Self-levelingrequires no tooling

Excellent elongation/compression properties

Resistant to smoke and water


Smoke, fumes and water resistant

Meets Class I W-rating requirements



Metal pipes

Cable bundles

Sealing multiple penetrations in small or large openings

For use with Concrete floors rated up to 3-hours

Examples Penetrations for metal pipes between floor levels

Construction joints and expansion joints in floors




Opening 1. Clean the opening. Surfaces to which CP 604 will


Application of firestop 2. Insert fill of mineral wool (or backer as required).


4. Allow firestop sealant to level. Once cured, CP 604can only be removed mechanically.


Chemical resistance At room temperature the cured silicone sealant is

resistant for a short time to diluted (15%) acids and

lyes/alkalis as well as commercially availablecleaning agents and disinfectants (except thosecontaining iodine).

Concentrated acids and lyes/alkalis destroy siliconerubber over time.

Solvents and mineral oils cause cured silicone toswell. Consequently, proper functioning of thesealant should be checked after exposure to asolvent or mineral oil. Please contact your localsales representative or the nearest Hilti Center ifspecial requirements for chemical resistance have tobe met.

Not for use In areas immersed in water

Not to be painted


protected from moisture at a temperature of 40F(5C) to 77F (25C)

Observe expiration date on packaging

CP 604Self-Leveling Firestop Sealant


FIRESTOP SYSTEMS, JOINT SYSTEMS AND PERIMETER FIRE CONTAINMENT SYSTEMS


FMAPPROVED

F

CP 604 Technical DataChemical basis Neutral elastic siliconeColor GrayApplication temperature 40F to 104F (5C to 40C)Skin forming time Approx. 15 minCuring time Approx. 2 mm/3 daysJoint movement capability Approx. +20%Temperature resistance 40F to 248F (40C to 120C)Surface burning characteristics Flame Spread: 5(ASTM E 84-00) Smoke Development: 60ApprovalsCalifornia State Fire Marshal Listing No. 4485-1200:117

Listing No. 1452-1200:134City of New York MEA 237-02-MTested in accordance with UL 1479 ASTM E 1966

UL 2079 ASTM E 814 ASTM E 2307 ASTM E 84



1. Clean opening 2. Insert backing materialcompressed per ULSystem

3. Apply CP 604 4. Self levels notooling required

5. Fasten identificationplate (if required)

1. Clean opening 2. Insert backing material 3. Apply CP 604 4. Self levels notooling required

5. Fasten identificationplate (if required)

FirestopSystem

FirestopSystem

FLO

OR

JO

INT

FLO

OR

Joint installation: For floor applications. Not to be used in walls.

Through Penetration Installation (Top View): For floor applications. Not to be used in walls.

Product Information

Chap

ter

Tab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

s




24

CP 620Fire FoamProduct description Innovative firestopping solution for complex applications

Product features Up to 6 times expansion

Repenetrable

Cures within 60 seconds

Easy handling for difficult to reach applications

Paintable

Virtually impervious to smoke

Mold resistant

No additional materials required

Excellent water vapor impermeability


Areas of application Sealing small to medium size openings

Cables and cable trays

Non-combustible pipes

Combustible pipes when used in conjunction with Hilti Wrap Strips

Where cables, steel, copper, cast iron or plastic pipes all passthrough the same opening

For use with floor and wall assemblies Concrete, drywall, masonry

Examples Multiple penetrations

Insulated metal pipes




Application1-4.

Prepare dispenser and cartridges as shown below.The Fire Foam from the first few strokes of thedispenser should be discarded until the Fire Foam inthe mixer has a consistent red color.

5. Apply the CP 620 Fire Foam in the opening.

Begin applying CP 620 Fire Foam at the back ofthe opening and work toward the front. Fill theopening completely with CP 620 Fire Foam.

When dispensed slowly, the Fire Foam can beeasily built up.

When dispensed quickly, the consistency of theFire Foam is more liquid allowing it to flow betterbetween the cables. Note: The CP 620 Fire Foambecomes warm for a short time after application.

6. For maintenance reasons, the application can bepermanently marked with an installation plate. Markthe installation plate and fasten it in a visibleposition next to the seal.

Re-installing cables or pipes Additional cables or pipes can be installed later

without difficulty.

Use a suitable tool to create an opening(screwdriver, drill bit, etc.). Push the cable or pipethrough and then seal the remaining openingcarefully with CP 620 Fire Foam.

Notes The CP 620 Fire Foam can be cut back to no less

than the minimum specified installation depth (seeapplicable UL systems for depths).

Pieces of cured excess CP 620 Fire Foam whichhave been cut off can be laid in the next openingand fresh CP 620 Fire Foam can be applied aroundthese.

Not for use Exposed to weather

Exposed to UV

Storage Store only in the original packaging in a dry place at

a temperature of 40F to 77F (5C to 25C). Seetechnical data for application and substratetemperatures. Partly-used cartridges can be storedwith mixer attached until they are required again.When re-using a partially used cartridge, simplyattach a new mixer and dispense accordingly.


1. Hold the cartridgein the upright positionand unscrew the cap.

2. Fit the mixer andscrew in a clockwisemotion until secure.

3. Release thedispenser and pullback the piston rod.

4. Insert the cartridgein the dispenser.

5. Apply CP 620 FireFoam, building up a sealby working from theback towards the front.

6. Attach theinstallation plate (if required).

Aus-fhrungsschild


FIRESTOP SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY

66Y7

FMAPPROVED

F

CP 620 Technical DataChemical basis Two component polyurethaneColor RedFire foam yield Up to 110 in3

Application temperature 32F to 104F (0C to 40C)Curing time Non-tacky after Approx. 35 seconds

Ready to cut after Approx. 1 minuteThermal insulation (R-value) 2.83.0 per inch of thicknessTemperature resistance 22F to 212F (30C to 100C)of cured foamSound transmission classification 50 (Relates to specific construction)(ASTM E90-97) Structure-borne sound insulation Pipe/wall 3050%Surface burning characteristics Flame spread: 0(ASTM E84-01) Smoke development: 15ApprovalsCalifornia State Fire Marshal Listing No. 4485-1200:119City of New York MEA 238-02-MTested in accordance with UL 1479 ASTM E 814 ASTM E 84At 73F (23C) and 50% relative humidity

sodfm,ev iJdjfiwhriuh. NoWE4i5kirdwiloi4jtf-x

-.vbvbvh, ireivu9+12oeoo

CP 620 Brandschutzbeschichtung

Product Information




25

Chap

ter T

ab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

sC

hap

ter T

ab

s

CP 637Firestop MortarProduct description Fire-resistant mortar suitable for firestopping large openings

Product features Quick-setting forms can be removed in as little as 2 hours

Superior working properties

Can be used in horizontal or vertical applications

Saves time

Versatile

Simple mixing

Areas of application Sealing medium size to large openings with non-combustible

pipes or cable trays

Permanent fire seal for cables, cable trays and non-combustiblepipes

For use with Concrete and masonry assemblies

Walls and floors rated up to 4-hours

Examples Large openings containing multiple steel,

conduit and EMT pipes

Large openings with single or multiple cable tray applications




Mix ratio (recommended, mortar to water):

Trowelable 30 lb (14.6 kg) : 2 U.S. gal (8 L)Pourable 30 lb (14.6 kg) : 2.5 U.S. gal (9.5 L)


1. Clean penetration.Pre-moisten sides of penetration.

2. Important! First add clean waterto separate container. Then slowlyadd CP 637 to water while stirringby hand or power mixer to ensuresmooth, lump-free mix. See tableabove for mix ratio.

3. Work prepared mortar intoopening by troweling, pouring, orpumping with suitable pump. Useforms for large openings. Makesure application has been sealedaccording to the applicable UL FireResistance Directory or HiltiFirestop Manual.

4. Fasten identification plate (ifrequired).



66Y7

CP 637 Technical DataColor Light red Application temperature (ideal) 40F to 110F(5C to 43C)Form removal Approx. 2 hours(depending on consistency)Density: Approx. 40.6 pcf (dry)Expansion on setting 0.08%(approx.)Compressive strength

24 hrs. after casting After full cure Pourable 508 psi (3.5 N/mm2) 725 psi (5.0 N/mm2) Plastic 696 psi (4.8 N/mm2) 1200 psi (8.3 N/mm2) Stiff 870 psi (6.0 N/mm2) 1784 psi (12.3 N/mm2)

Surface burning characteristics Flame spread: 5(ASTM E84-01) Smoke development: 0Yield (30 lb pail) 9001000 cubic inches depending on mix ratioApprovalsCalifornia State Fire Marshal Listing No. 4485-1200:120City of New York MEA 239-02-MTested in accordance with ASTM E 814

UL 1479 ASTM E 84


Product Information

Chap

ter

Tab

sA

pp

ilcatio

ns/P

rod

ucts

Chap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

sC

hap

ter

Tab

s




26

FS 657Fire BlockProduct description Ready-to-use, intumescent flexible block based on a two-

component polyurethane foam

Product features Suitable for re-penetration or new penetrations

Economical to use with short installation times

Easy installation no special tools required

Ideal for use in floors no forming required

One sided wall systems available

Halogen, asbestos and solvent free

Operational immediately after installation

Can be painted

Smoke resistant

Areas of application Sealing single or multiple penetrations in small to large openings

Temporary or permanent sealing of cables and cable traypenetrations

Temporary or permanent sealing of insulated and non-insulatedmetallic pipes and combustible pipe penetrations

For use with Walls (UL tested up to max. opening 52" x 48")

Floors (UL tested up to max. opening 36" x 36")

Concrete, porous concrete, masonry and gypsum wall assemblies

Wall assemblies rated up to 4 hours

Floor assemblies rated up to 3 hours

Examples Completely dust and fiber free rooms and places where electrical

installations are frequently used (ie: computer centers, hospitals,laboratories, etc.)

New buildings in the construction phase and during renovation

Large openings containing multiple penetrations as found inproduction bays, warehouses, hospitals etc.

Installation instructions for FS 657

FS 657 Technical DataColor RedApplication temperature 40 F to 104 F (5 C to 40 C)Temperature resistance 5 F to 140 F(-15 C to 60 C)Intumescent Activation Approx. 572F (300C)Expansion ratio (unrestricted) Up to 1:3Surface burning characteristics Flame Spread Index: 0(ASTM E 84-96) Smoke Development Index: 25Sound transmission classification 54 (Relates to specific construction)(ASTM E 90-99) ApprovalsCalifornia State Fire Marshal Listing No. 4485-1200:106City of New York MEA 325-96-MTested in accordance with UL 1479

ASTM E 814 ASTM E 84




66Y7

FMAPPROVED

F




Opening1. Clean the opening. Penetration and penetration

supporting structures must be installed incompliance with local building and electricalstandards.

Application of Fire Blocks2a.If no penetrations are located, build up FS 657 FIRE

BLOCK firmly seated, within opening.

2b.If penetrations are located, build up FS 657 FIREBLOCK firmly seated, while cutting blocks with aknife to suit the placed penetrations.

3. Finish building up FIRE BLOCKS until entire openingis filled.

4. Completely fill cable spaces, gaps between blocksand pipes, and joints with FS-ONE Firestop Sealant.


Re-installing cables or otherpenetrations Remove or cut the block from the seal.

Install the penetrant and re-lay the block incompliance with the approval. Fill gaps and spaceswith FS-ONE.

Single cables can be run through joints betweenblocks or a hole can be drilled through a block usinga sharpened piece of metal pipe or tubing.

Not for use In wet rooms, outdoors or exposed to the weather

or UV radiation (can be done only after applying anadditional silicone coating, i.e. CP 601S).


protected from moisture and direct sunlight

1. Clean opening. 2a. Build up blocks 2b. Cut blocks to sizefor penetrations inplace

3. Build up blocks 4. Fill gaps with

FS-ONE,

48909109 hilti fs manual

Documents