50py2r lg plasma tv mf-056b

PLASMA TVSERVICE MANUAL

CAUTIONBEFORE SERVICING THE CHASSIS,READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

CHASSIS : MF-056B

MODEL : 50PY2R50PY2R-ZB

website:http://biz.LGservice.come-mail:http://www.LGEservice.com/techsup.html

- 2 -

CONTENTS

SAFETY PRECAUTIONS ....................................................................................3

DESCRIPTION OF CONTROLS ..........................................................................4

SPECIFICATIONS................................................................................................8

ADJUSTMENT INSTRUCTIONS .......................................................................10

TROUBLE SHOOTING GUIDE..........................................................................15

BLOCK DIAGRAM.............................................................................................25

EXPLODED VIEW..............................................................................................26

EXPLODED VIEW PARTS LIST ........................................................................27

REPLACEMENT PARTS LIST...........................................................................28

SCHEMATIC DIAGRAM.........................................................................................

PRINTED CIRCUIT BOARD ..................................................................................

- 3 -

SAFETY PRECAUTIONS

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by inthe Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual toprevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.

General Guidance

An isolation Transformer should always be used duringthe servicing of a receiver whose chassis is not isolated fromthe AC power line. Use a transformer of adequate power ratingas this protects the technician from accidents resulting inpersonal injury from electrical shocks.

It will also protect the receiver and its components from beingdamaged by accidental shorts of the circuitry that may beinadvertently introduced during the service operation.

If any fuse (or Fusible Resistor) in this monitor is blown, replaceit with the specified.

When replacing a high wattage resistor (Oxide Metal FilmResistor, over 1W), keep the resistor 10mm away from PCB.

Keep wires away from high voltage or high temperature parts.

Due to high vacuum and large surface area of picture tube,extreme care should be used in handling the Picture Tube.Do not lift the Picture tube by its Neck.

Leakage Current Cold Check(Antenna Cold Check)With the instrument AC plug removed from AC source,connect an electrical jumper across the two AC plug prongs.Place the AC switch in the on position, connect one lead ofohm-meter to the AC plug prongs tied together and touch otherohm-meter lead in turn to each exposed metallic parts such asantenna terminals, phone jacks, etc. If the exposed metallic part has a return path to the chassis, themeasured resistance should be between 1M and 5.2M. When the exposed metal has no return path to the chassis thereading must be infinite.An other abnormality exists that must be corrected before thereceiver is returned to the customer.

Leakage Current Hot Check (See below Figure) Plug the AC cord directly into the AC outlet.Do not use a line Isolation Transformer during this check. Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitorbetween a known good earth ground (Water Pipe, Conduit, etc.)and the exposed metallic parts.Measure the AC voltage across the resistor using ACvoltmeter with 1000 ohms/volt or more sensitivity.Reverse plug the AC cord into the AC outlet and repeat ACvoltage measurements for each exposed metallic part. Anyvoltage measured must not exceed 0.75 volt RMS which iscorresponds to 0.5mA.In case any measurement is out of the limits specified, there ispossibility of shock hazard and the set must be checked andrepaired before it is returned to the customer.

Leakage Current Hot Check circuit

1.5 Kohm/10W

To Instrument'sexposed METALLIC PARTS

Good Earth Groundsuch as WATER PIPE,CONDUIT etc.

AC Volt-meter

IMPORTANT SAFETY NOTICE

0.15uF

MODE

INPUT

TVDVD

VCR

AUDIO

PIP PR -PIP PR + SWAP

PIP INPUT

STB

MENU

MUTE

SIZE POSITION INDEX HOLD

TIME REVEAL MIX MODE

SLEEP I/II PIP M/C EJECT

PSM SSM ARC TEXT

Q.VIEWLIST

FAV

OK

VOL PR

MULTIMEDIA

POWER

CABLE

M?

EXIT

INFO i MARK

MULTIMEDIASelects the Component, RGB or HDMImodes.switches the set on from standby.

POWERswitches the set on from standby or off tostandby.

MARKSelects the wanted functions.

Brings up the menu to select the Photo orMusic mode of Xstudio for memory cards.

EXITClears all on-screen displays and returnsto TV viewing from any menu.

Q.VIEWReturns to the previously viewed programme.

M/C EJECTRemove the Memory Card.

ARC Changes the picture format.

FAVselects a favourite programme.

TEXTThese buttons are used for teletext.For further details, see the Teletext section.Note : In teletext mode, the PIP PR +/-,SWAP and PIP INPUT buttons are usedfor teletext function.

PIPSwitches the sub picture on or off.Selects PIP, POP or DW modes.PIP PR + /-Selects a programme for the sub picture.SWAPAlternates between main and sub picture.PIP INPUTSelects the input mode for the sub picture.SIZEAdjusts the sub picture size.POSITIONMoves the sub picture to DD / EE or FF / GGdirection.

INPUTSelects the TV, AV1, AV2, S-Video2, AV3,

AV4, AV5, Component, RGB or HDMI modes.switches the set on from standby.

MODESelects another device.

VCR BUTTONSControls a video cassette recorder.

These buttons are used for X-Studio.For further details, see the X-Studio section.

MENUDisplays on screen menus one by one.

Exits the current menu.Memorizes menu changes.

INFODisplays information on top of the screen

whilst watching the TV.

MUTESwitches the sound on or off.

NUMBER buttons

LISTDisplays the programme table.

PSMAdjusts the factory preset picture according

to the room.

SSMTo select the sound appropriate to your

viewing programme.

SLEEPSets the sleep timer.

I/IISelects the language during dual language

broadcast.Selects the sound output.

VOL DD / EE (Volume Up/Down)Increases/decreases sound level.

PR DD / EE (Programme Up/Down)Selects a programme.

OKaccepts your selection or displays the

current mode.DD / EE or FF / GG

Adjusts menu settings.Selects menu item.

LIGHTIlluminates the remote control

buttons of selected mode.

- 4 -

DESCRIPTION OF CONTROLS

- 5 -

INPUT

OK

71 8

1. Remote Control Sensor

2. Power ButtonSwitches the set on from standby or off to standby.

3. INPUT ButtonSelects the TV, TV, AV1, AV2, S-Video2, AV3, AV4, AV5,Component, RGB or HDMI modes. Switches the set on from standby.

4. MENUDisplays on screen menus one by one.Exits the current menu.Memorizes menu changes.

5. OKAccepts your selection or displays the current mode.

6. DD / EE (Programme Up/Down)Selects a programme or a menu item.Switches the set on from standby.FF / GG (Volume Up/Down)Adjusts the volume.Adjusts menu settings.

7. INDEXSwitches LED Display on or off.

8. Power IndicatorIlluminates red in standby mode, illuminates green whenthe set is turned on.

9. Memory Card Slots 1, 2

10

2

3

4

5

6

- 6 -

VID

EO

S-VIDEO

AUD

IOR

L/MON

O

A/V INPUT2A/V INPUT2

AC INPUTAntenna

AUDIO AUDIO

L R

VIDEO VIDEO

COMPONENTCOMPONENT AUDIO AUDIO

L R

V VARIABLE ARIABLE AUDIO OUTAUDIO OUT

AUDIO AUDIO

(MONO)(MONO)L R

S-VIDEOS-VIDEO VIDEOVIDEO

AAV4V4

AAV1V1

AAV2V2

AAV3V3

HDMI/DVI(VIDEO) AUDIO INPUT RGB INPUT

RS-232C INPUT(CONTROL/SERVICE)

REMOTECONTROL

1. HDMI(DVI VIDEO) / AUDIO INPUT / RGB INPUTConnect the monitor output socket of the PERSONALCOMPUTER, DVD or STB to this socket.Note: If you want to use RGB/DVI audio, we strongly recommend that you use the cable that has a core, or theEMI Filter core along with separate cable.

2. REMOTE CONTROL

3. RS-232C INPUT(CONTROL/SERVICE) PORTConnect to the RS-232C port on a PC.

4. COMPONENT INPUTConnect DVD video outputs to Y, PB, PR of COMPONENTINPUT and audio outputs to Audio sockets of AUDIO INPUT.

AUDIO/VIDEO IN SOCKETS (AV4)Connect the audio/video out sockets of external equipmentto these sockets.S-VIDEO/AUDIO IN SOCKETS Connect the S-VIDEO out socket of an VCR to the S-VIDEOsocket. Connect the audio out sockets of the VCR to the audio socketsas in AV4.

5. VARIABLE AUDIO OUTPUT

6. EURO SCART SOCKETConnect the euro scart socket of the VCR to these sockets.

Note:a. If you want to use the EURO scart cable, you have to usethe signal shielded Euro scart cable.b. If the S-VIDEO(Y/C) signal is received through the Euroscart socket 2 (AV 2), you must change to the S-Video 2(Y/C) mode.

7. ANTENNA INPUT

8. POWER CORD SOCKETThis Monitor operates on AC power. The voltage is indicatedon the Specifications page. Never attempt to operate the seton DC power.

9. AUDIO/VIDEO INPUT (AV5)S-VIDEO/AUDIO IN SOCKETS

1 42 3 6 75 8

9

- 7 -

Tilt wall mounting bracket Video cables Audio cablesCeiling mounting bracket

40

4250

42

40

- Optional extras can be changed or modified for quality improvement without any notification new optional extras can beadded.

- Contract your dealer for buying these items.

Optional Extras

Accessories

- Secure the set assembly by joining it to a wall by using the TV (or Eye Bolts)/Wall brackets.Joining the set assembly to the wall to protect the set tumbling

If the set will be mounted on a desk top, insert the 2-Eye Bolts (or 2-TV bracket bolts with 2-TV brackets) and tighten them securely in the upperholes as shown. (Only 50PY2R series: After removing the existing bolts, insert the 4-TV bracket boltsand tighten securely, in the holes on the bracket.)Install the wall brackets on the wall with bolts, (not supplied with the product), asshown.Match the height of the TV brackets (or Eye Bolts) and the wall brackets. Check to be sure the brackets are tightened securely.

Secure the TV assembly to the wall with strong strings or wound wire cables, (notsupplied with the product), as shown.

AS mark

LG TV

Owners Manual

1.5V1.5V

Alkaline batteries

Power Cord

MODE

INPUT

TVDVD

VCR

AUDIO

PIP PR -PIP PR + SWAP

PIP INPUT

STB

MENU

MUTE

SIZE POSITION INDEX HOLD

TIME REVEAL MIX MODE

SLEEP I/II PIP M/C EJECT

PSM SSM ARC TEXT

Q.VIEWLIST

FAV

OK

VOL PR

MULTIMEDIA

POWER

CABLE

M?

EXIT

INFO i MARK

Remote Control handset

6-RING SPACER(Only 60PY2R series)

2-TV bracket bolts (option)(or 50PY2R series: 4-TV bracket

bolts)(Only 60PY2R series : 6-Wall

mounting bracket bolts)

2-TV brackets2-Wall brackets

(option)2-Wall brackets

(option)2-Eye Bolts

(option)

SPECIFICATIONSNOTE : Specifications and others are subject to change without notice for improvement.

- 8 -

V Application RangeThis spec is applied to the 42/50 PDP TV used MF-056B Chassis.

V SpecificationEach part is tested as below without special appointment.1) Temperature : 255C (779F), CST : 4052) Relative Humidity: 6510%3) Power Voltage: Standard Input voltage (100-240V~, 50/60Hz)

* Standard Voltage of each product is marked by models.4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with BOM.5) The receiver must be operated for about 20 minutes prior to the adjustment.

V Test Method1) Performance : LGE TV test method followed.2) Demanded other specification

Safety: CE, IEC specificationEMC : CE, IEC

V General Specification- Module Specification

Remark

Safety : IEC/EN60065, EMI : EN55013, EMS : EN55020

Model Name

50P2YR-ZB

Market

EU

Remark

PDP

Maker : NBK/ Mitsui/ LG Chemical

LGE SPEC

Maker : SONY/ Sanken

Specification

50 inch wide Color Display Module

16:9

PDP50X2A, RGB Closed Type

45% Total light transmittance (E-Mesh)1) Temp : 0~40 deg2) Humidity : 0~85%1) Temp : -20~60 deg2) Humidity : 0~85%100-240V~, 50/60Hz

No

1

2

3

4

5

6

7

Item

Display Screen Device

Aspect Ratio

PDP Module

Operating Environment

Storage Environment

Input Voltage

2. Model Specification

- 9 -

Item

Market

Broadcasting system

Available Channel

Receiving system

SCART Jack (3EA)Video Input (2EA)S-Video Input (3EA)Component Input (2EA)RGB Input(1EA)

HDMI Input(1EA)

Audio Input(4EA)Wired Control(1EA)Audio variable out(1EA)

No

1

2

3

4

5

6

7

8

9

10

11

12

13

Specification

EU

PAL B/G/I/D/K, NTSC

BAND PAL NTSC

VHF/UHF C1~C69 2~83

CATV S1~S47 1~71

Upper Heterodyne

PAL, SECAM, NTSC

PAL, SECAM, NTSC

PAL, SECAM, NTSC

Y/Cb/Cr, Y/Pb/Pr

RGB-PC,

RGB-DTV

HDMI-PC

HDMI-DTV

PC Audio, Component(1EA), AV(2EA)

Remark

4 System : PAL, SECAM, NTSC,PAL60



L/R Input

- 10 -

ADJUSTMENT INSTRUCTIONS1. Application Object

These instructions apply to the MF-056B Chassis.

2. Specification(1) Because this is not a hot chassis, it is not necessary to use

an isolation transformer. However, the use of isolationtransformer will help protect test instrument.

(2) Adjustment must be done in the correct order.(3) The adjustment must be performed in the circumstance of

255C of temperature and 6510% of relative humidity ifthere is no specific designation.

(4) The input voltage of the receiver must keep 100-220V,50/60Hz.

(5) The receiver must be operated for about 15 minutes priorto the adjustment.

O After RGB Full white HEAT-RUN Mode, the receiver mustbe operated prior to adjustment.

O Enter into HEAT-RUN MODE1) Press the POWER ON KEY on R/C for adjustment.2) OSD display and screen display 100% full WHITE

PATTERN.

[ Set is activated HEAT-RUN without signal generator inthis mode.

[ Single color pattern(RED/BLUE/GREEN) of HEAT-RUN mode uses to check PANEL.

Caution) If you turn on a still screen more than 20 minutes(Especially digital pattern, cross hatch pattern), afterimage may be occur in the black level part of thescreen.

3. Channel memory3-1. Setting up the LGIDS

1) Install the LGIDS. (idsinst.exe)2) After installation, restart your PC.3) Extract [files.zip] to folder [c:\LGIDS\files].4) Start LGIDS.

3-2. Channel memory Method 1) Select PDP and Hurricane on Model dialog. And check

your connection in Communication dialog. (If yourconnection is NG, then set your PORT(COM1,2,3,...)correctly.)

2) Connect RS-232C cable and turn on the power.(If your connection has completed, you can see Ready.)

[ If your set is not an end products but only a board, youhave to make your board to Stand-by state (LED_R). Andyou have to Download in Stand_by power state.

3) Select proper CH_memory file(*.nvm) for each model at[NVRAM Download] $ [Write Batch]Next, select proper binary file(*.bin) including the CHinformation for each model at [NVRAM File].

4) Click the [Download] button.It means the completion of the CH memory download if allitems show OK and Status is changed by PASS at thelower right corner of the window.

5) If you want to check whether the CH information ismemorized correctly or not, click the [Verify] button. And then compare NVRAM File(*.bin) with the CHinformation downloaded.

3-3 Sub program download1) Select PDP and Hurricane on Model dialog. And check

your connection in Communication dialog. (If yourconnection is NG, then set your PORT(COM1,2,3,...)correctly.)(Fig. 1)

(Fig. 2)

(Fig. 3)

- 11 -

2) Connect RS-232C cable and turn on the power. (Use thespecial Cable For Sub-program) (If your connection hascompleted, you can see Ready)

3) Select proper Model for each model.4) Select flash file for each model.5) Click the [download] button

It means the completion of the ROM download if all itemshow OK and Status is changed by PASS at the lowerright corner of the window.

4. POWER PCB Assy Voltage Adjustments (Va, Vs Voltage Adjustments)

4-1. Test Equipment : D.M.M. 1EA4-2. Connection Diagram for Measuring

: refer to fig.5

4-3. Adjustment Method(1) Va Adjustment

1) After receiving 100% Full White Pattern, HEAT RUN.2) Connect + terminal of D.M.M to Va pin of P807, connect

- terminal to GND pin of P807.3) After turning RV501, voltage of D.M.M adjustment as

same as Va voltage which on label of panel right/top.(Deviation; 0.5V)

(2) Vs Adjustment1) Connect + terminal of D.M.M to Vs pin of P807, connect

terminal to GND pin of P805.2) After turning RV401, voltage of D.M.M adjustment as

same as Va voltage which on label of panel right/top.(Deviation; 0.5V)

5. EDID (The Extended DisplayIdentification Data)/ DDC (DisplayData Channel) download

5-1. Required Test Equipment1) Adjusting PC with S/W for writing EDID Data.(S/W : EDID

TESTER Ver.2.5)2) A Jig for EDID Download3) Cable : Serial(9Pin or USB) to D-sub 15Pin cable, D-sub

15Pin cable, DVI to HDMI cable

5-2. Setting of device

5-3. Preparation for Adjustment1) As above Fig. 6, Connect the Set, EDID Download Jig, PC

& Cable.2) Turn on the PC & EDID Download Jig. And Execute the

S/W : EDID TESTER Ver,2.53) Set up S/W option

Repeat Number : 5Device Address : A0PageByte : 8

4) Power on the Set

Each PCB assembly must be checked by check JIG set.(Because power PCB Assembly damages to PDP Module,especially be careful)

(Fig. 5) Connection diagram of power adjustment for measuring

(Fig. 6) Connection Diagram of DDC download

(Fig. 4)

- 12 -

5.4. Sequence of Adjustment(1) DDC data of Analog-RGB

1) Init the data

2) Load the EDID data.(Open File)[Analog(RGB) : H2_VGA_XGA_RGB(2B52).ANA]- for VGA,XGA[Digital(HDMI) : H2_VGA_HDMI(CB50).DVI] - for VGA[Digital(HDMI) : H2_XGA_HDMI(0F0F).DVI] - for XGA

3) Set the S/W as below.4) Push the Write Data & Verifybutton. And confirm Yes.5) If the writing is finished, you will see the OK message.

6. Auto AV(CVBS) Color Balance6-1. Required

- This AV color balance adjustment should be performed beforwhite Balance Adjustment

6-2. Required Equipment1) Remote controller for adjustment2) AV Pattern Generator

: 802F Pattern Generator, Master(MSPG-925FA), etc(Which has PAL Composite Video format output withstandard(1.0 Vpp) Vertical 100% Color Bar Pattern as Fig 7)

6-3. Method of Auto Color Balance1) Input the PAL Composite Video (Fig7. 100% Color Bar

Pattern) into video input.2) Set the PSM to Standard mode in Picture menu.3) Press INSTAR key on R/C for adjustment.4) Press the G(Vol. +) key operate to set, then it becomes

automatically.5) Auto-RGB OK means completed adjustment.

7. Adjustment of White Balance7-1. Required Equipment

1) Remote controller for adjustment2) Color Analyzer (CA-100 or same product)3) Auto W/B adjustment instrument(only for auto adjustment)4) AV Pattern Generator

7-2. Connecting diagram of equipment formeasuring (For Auto Adjustment)

W Auto adjustment Map(RS-232C)

7-3. Adjustment of White BalanceO Operate the zero-calibration of the CA-100, then stick

sensor to PDP module surface when you adjust.O For manual adjustment, it is also possible by the following

sequence.

1) Select white pattern of heat-run mode by pressing poweron key on remote control for adjustment then operate heatrun more than 15 minutes.

2) As below Fig.9, Supply 216Level (85 IRE) full screenpattern to Video input.

3) Press the TV/AV KEY on R/C for converting input mode.4) Set the PSM to Standard mode in Picture menu.5) Enter the White Balance adjustment mode by pressing the

INSTART key twice(White Balance) on R/C.6) Stick sensor to center of the screen and select each items

(Red/Green/Blue Gain and offset) using D / E(CH +/-) keyon R/C.

Type

Baud Rate

115200

Index

R GainG GainB Gain

R OffsetG OffsetB Offset

Data bit

8

Cmd1 Cmd2j aj bj cj dj ej f

Stop bit1

Parity

NONE

MF-056A/ MF-056B/ MF-056C

ProtocolSetting

Data Min Value

00(00)00(00)00(00)00(00)00(00)00(00)

Max Value

255(FF)255(FF)255(FF)255(FF)255(FF)255(FF)

(Fig. 7) Auto AV(CVBS) Color Balance Test Pattern

(Fig. 8) Connection Diagram of Auto W/B adjustment

MSPG-MSTG- 5200

216 Level (85 IRE)

COLORANALYZERTYPE ; CA-100

CVBSsignalinput

RS-232C Serial Communication

925

- 13 -

7) Adjust Only High Light with R Gain/ B Gain using F / G(VOL+/-) key on R/C.

8) Adjust it until color coordination becomes as below.(Initially, R/G/B gain and R/G/B offset values ae fixed asbelow)Red Gain : 82, Green Gain : 80, Blue Gain : 86Red Offset :7D, Geen Offset: 7E, Blue Offset : 80

Bright : High Light : 80 20cd/m2Color-Coordinate : High Light : X : 0.287 0.003

Y : 0.291 0.003Color Temperature : 9,300K 500K

9) When adjustment is completed, Exit adjustment mode usingEXIT key on R/C

8. Auto Component Color Balance8-1. Requirement

O It is Very import to use correct adjustment pattern like Fig10.- Within the pattern, color sequence should be aligned

: W-Y-C-G-M-R-BLUE-BLACK(If color sequence is reversed(Black ->...-> White),reverse the pattern with REV key, when using Masterpattern generator like MSPG-925)

- If Minimum Black Level and/ or Maximum Whit Level isnot correct, Select 100% Color Bar pattern.

8-2. Required Test Equipment1) Remote controller for adjustment2) 802F Pattern Generator

(Which has 720p Ypbpr output with Standard (0.7Vpp)Vertical 100% Color Bar Pattern as Fig.10)

8-3. Method of Auto Component Color Balance1) Input the Component 720p 100% Color Bar signal into

Component1 or Component2.2) Set the PSM to Standard mode in Picture menu.3) Press INSTART key on R/C for adjustment.4) Press the G(Vol. +) key operate To set, then it becomes

automatically.5) Auto-RGB OK means complete adjustment

9. Auto RGB Color Balance9-1. Requirement

O It is very import to use correct adjustment pattern like Fig11- Within the pattern, color sequence should be aligned

: W-Y-C-G-M-R-BLUE-BLACK(If color sequence is reversed(Black ->...-> White),reverse the pattern with REV key, when using Masterpattern generator like MSPG-925)

- If Minimum Black Level and/ or Maximum Whit Level isnot correct, Select 100% Color Bar pattern.

9-2. Required Test Equipment1) Remote controller for adjustment2) 802F Pattern Generator, Master (MSPG-925FA), etc.

(Which has XGA 60Hz PC Format output with standard(0.7Vpp) horizontal black and white pattern as Fig.11)

9-3. Method of Auto RGB Color Balance1) Input the PC 1024x768 60Hz horizontal black and white

pattern into RGB.2) Set the PSM to Standard mode in Picture menu.3) Press ADJ key on R/C for adjustment.4) Press the G(Vol. +) key operate To set, then it becomes

automatically.5) Auto-RGB OK means completed adjustment.

(Fig. 10) Auto Component Color Balance Test Pattern

(Fig. 11) Auto RBG Color Balance Test Pattern

(Fig. 9) Pattern for Adjustment of White Balance

216 Level (85 IRE)

9. Default Value in Adjustment mode9-1. Auto Color Balance (Component/RGB)

9-2. White Balance

- 14 -

(Fig. 13) Default Value on OSD

White Balance(Hex)Red Gain 82Red Offset 80Green Gain 86Green Offset 7DBlue Gain 7EBlue Offset 80Reset G To Set

(Fig. 12) Default Value on OSD

Auto Color Balance(HEX)Auto-RGB G To SetSource CortezRed Offset1 22Green Offset1 24Blue Offset1 23Red Offset2 45Green Offset2 43Blue Offset2 37Red Gain 14Green Gain 31Blue Gain 11Reset G To Set

- 15 -

TROUBLE SHOOTING GUIDE

1. Power Board 1-1. The whole flowchart which it follows in voltage output state

Start check

Manufacture enterprisemeaning of a passage

1. Check the Power Offcondition.

Doesn't the screen whole come

out?

Is it identical with Power Off

condition?

Yes

Yes

No

No

No

No

No

2. Check the Interfacesignal condition.

Is the Interface signal operated?

Yes

3. Check the St-by 5Vsignal circuit.

Doesn't the low pressure output

come out?

Doesn't the St-by 5V signal

come out?

Yes

Yes

No

4. Check the 5V Monitorsignal circuit.

Doesn't the 5V Monitor signal

come out?

Yes

7. Check the VSC Vs-ONsignal

Doesn't the high tension output

come out?

Doesn't the VSC signal Vs-ON

come out?

Yes

Yes

Doeshigh tension

output voltage Dropoccur?

When theY B/D Module

input connector isremoved, does output

voltage dropoccur?

When theY, Z B/D Module

input connector is remove,does Power Board hightension

output voltage Dropoccur?

Yes No No

9. Check the PowerBoard Output high

tension circuit

Yes

10. Check the Z B/DModule output circuit

Yes

When theZ B/D Module

input connector isremoved, does output

voltage Drop occurs?

11. Check the Y B/DModule output circuit

Yes

No

8. Check the Vs, Vavoltage output circuit.

Doesn't the Vs, Va voltage output

come out?

Yes

No

No

5. Check the VSC RL-ONsignal.

Doesn't the VSC signal RL-ON

come out?

Yes

6. Check the VSC lowpressure output

Doesn't the VSC low pressureoutput come out?

Yes

- 16 -

1-2. Sony Power Board Structure

1 2 3

T502: Vs TransT702: Va TransT101: St-by TransT103: Low Voltage Trans

- 17 -

1-3. Sanken, LGIT Power Board Structure

1 2 3

T221: Vs TransT271: Va TransT121: St-by TransT201: Low Voltage Trans

- 18 -

2. No Power(1) Symptom

Doest minute discharge at module. Non does not come in into the front LED.

(2) Check following

Is plug in power cord? Plug in power cord.

Yes

No

Is the Line Filter and PowerBoard Cable connected? Connect the Cable.

Yes

No

Is the Fuse(F101) onPower Board normal? Replace the Fuse.

Yes

No

Is the Power Board and 7P ofVSC Board Cable connected? Connect the Cable.

Yes

No

After the cable connect is remvedto Power Board(except the CN101connection cable), the AC voltagemarking is authorized on manual.When ST-BY 5V is not operated,replace Power Board.

- 19 -

3. Protect Mode(1) Symptom

After once shining, it does not discharge minutely from module

The Rely falls(The sound is audible click) It is converted with the color where the front LED

is red from green.

(2) Check following

Is the Power Boardnormal ?

Replace PowerBoard.

Is output the normality Low/Highvoltage except Stand-by 5V?

Yes

No No

Is the each connectornormal?

Replace theconnector.

ReplaceY-Board.

After connecting well each connector,the normality it operates?

Yes

No No

Is the Ctrl Boardnormal?

ReplaceX-Board.

Is the output voltage normal afterremove P1, 2, 4, 9, 10 connector of

Ctrl-B/D?Yes

No Yes

Is the Y-Boardnormal?

Is the output voltagenormal after removeP5, P6 connector of

Y-B/D?

Is the Fuse(FS2) on Y-B/D normal?(In case of open is replace)

Yes

No Yes Yes

ReplaceZ-Board.

Is the Z-Boardnormal?

Is the output voltagenormal after removeP1 connector of Z-

B/D?

Is the Fuse (FS1, FS2) on Z-B/Dnormal? (In case of open is replace)

Yes

No Yes

Is the X- Boardnormal?


X-B/D?

After remove P1, P2, P3 output voltagenormality: Replace Right X-B/DAfter remove P4, P5 output voltagenormality: Replace Left X-B/D

Yes

No Yes

Is the VSC Board normal?

Is the output voltage normal afterremove P1001, P1100?

After crisis COF of each board, check the normality operates.If in case normality operates, correspondence COF Fail isreplace the module.

After remove P1001, 1100 normaloperation: Replace VSC Board

Yes

No

Is the COF of X, Y, Znormal ?

No

Yes

Yes

- 20 -

4. No Raster(1) Symptom

Doest minute discharge at module. It maintains the condition where the front LED is green.

(2) Check following

Is the Power Boardnormal?

Replace thePower Board.

Is output the normality Low/Highvoltage except Stand-by 5V?

Yes

No No

Is the each connectornormal?

Replace theconnector.

ReplaceY-Board.

After connecting well each connector,the normality it operates?

Yes

No No

Is the Ctrl Board normal?

ReplaceX-Board.


Ctrl-B/D?Yes

No Yes

Is the Y-Boardnormal?

Is the output voltagenormal after removeP5, P6 connector of

Y-B/D?

Is the Fuse(FS2) normal on Y-B/D?(In case of open is replace)

Yes

No Yes Yes

ReplaceZ-Board.

Is the Z- Board normal?

Is normal the outputvoltage after remove

P1 connector of Z-B/D?

Is the Fuse(FS1, FS2) normal onZ-B/D? (In case of open is replace)

Yes

No Yes

Is the X- Board normal?


X-B/D?

After remove P1, P2, P3 output voltagenormality: Replace Right X-B/DAfter remove P4, P5 output voltagenormality: Replace the Left X-B/D

Yes

No Yes

Is the VSC Board normal?

Is the output voltage normal afterremove P1001, P1100?

After crisis COF of each board, check the normality operates.If in case normality operates, correspondence COF Fail isreplace the module.

After remove P1001, P1100 normaloperation: Replace the VSC Board

Yes

No

Is the COF of X, Y, Znormal?

No

Yes

Yes

- 21 -

5. In case of occurring strange screen into specific mode5-1. In case the OSD does not displayed

(1) Symptom LED is green The minute discharged continuously becomes accomplished from module

(2) Check following

Is the LVDS cablenormal ?

Is the VSC Boardnormal?

Is the LVDS cableconnected well?

Cable inserts well.Yes

No

No

Yes

Does the FIL8532IC(IC800) Operates ?

Replace FIL8532IC(IC800).

No

Is the Ctrl Board ofModule normal? Replace Ctrl B/D.

No

No

YesReplace VSC B/D

Replace the cable.Yes

- 22 -

5-2. In case of doest display the screen into specific mode(1) Symptom

The screen does not become the display from specific input mode(RF, AV, Component, RGB, DVI).

(2) Check following Check the all input mode should become normality display. Check the Video(Main)/Data(Sub), Video(Main)/Video(Sub) should become

normality display from the PIP mode or DW mode. (Re-Check it Swap)

(3) In case of becomes unusual display from RF mode

(4) In the case of becomes unusual display from RF, AV mode

(5) In the case of becomes unusual display from Component, RGB mode

(6) In the case of becomes unusual display from HDMI mode

Is the Tuner normal?

Is the CXA2069Qnormal?

Is the Tuner Cableconnected well?

Cable inserts well.Yes

No

No

Yes

Is the FIL8532normal?

Replace the Tuner

No

Is the Input voltage, IIC Communicationand CVBS output normal?

Yes

Is the Input voltage, IICCommunication and HV

sync normal?

No Replace the ICNo


sync normal?

NoReplace the IC

No

Is the CXA2069Qnormal?

Yes



sync normal?

NoReplace the IC

No


sync normal?

NoReplace the IC

No



sync normal?

NoReplace the IC

No

Is the Sil9011normal?

Yes



sync normal?

NoReplace the IC

No


sync normal?

NoReplace the IC

No

- 23 -

6. In case of no sound(1) Symptom

LED is green Screen display but sound is not output

(2) Check following

Is the SPK cablenormal?

Is the SPK cableconnected well?

Cable inserts well.

No

No

Replace IC400

No

Replace IC401

No

Replace SPK cableYes

Yes

Is the RF/ AV/Component/ RGB/

HDMI sound normal?

No Does IC400Operates ?

Does IC401Operates ?

Replace IC402

No

Does IC402Operates ?

Replace VSC B/D

Yes Yes

- 24 -

7. In case of no normal XSTUDIO(1) Symptom

LED is green Dont enter EPF mode Screen display but sound is not output

(2) Check following

Is the EPF cablenormal?

Is the EPF cableconnected well?

Cable inserts well.

No

No

Replace IEPF B/D

No

Replace EPF cableYes

Yes

Is the EPF B/Dnormal?

No Replace VSC B/D

- 25 -

BLOCK DIAGRAMW

IRED

- 26 -

EXPLODED VIEW

501

560520

502

400

401

430

402

121

123

305303

306

307

309

308

122

551

550120

530

531

601600

580

200

202

203204

205

206201

208

207

101102

240

103

101 250

300

302

301

- 27 -

101 5900V12003B FAND12025S SDS 120MM*120MM*25MM 12V/0.2A 1300 5V-13.2V RPM

102 4980V01018A SUPPORTER, FAN EGI LEFT PDP DN-50PY10

103 4980V01017A SUPPORTER, FAN EGI RIGHT PDP DN-50PY10

120 6401VD0026C SPEAKER ASSEMBLY, FULL RANGE(L) NON TN-50PY20. C/SKD121 6401VD0026D SPEAKER ASSEMBLY, FULL RANGE(R) NON TN-50PY20. C/SKD122 6401VD0028B SPEAKER ASSEMBLY, WOOFER(R) NON 50PY2D C/SKD123 6401VD0029B SPEAKER ASSEMBLY, WOOFER(L) NON 50PY2D C/SKD200 6348Q-C043J PDP, 50 1365*768 PDP50X30000.ADLGB

201 6871QCH059A PWB(PCB) ASSEMBLY,DISPLAY CTRL ASSY HAND INSERT HAND INSERT 50X3 CTRL LGPCM1224202 6871QDH088A PWB(PCB) ASSEMBLY,DISPLAY YDRV ASSY HAND INSERT 50X3 YDRV TOP203 6871QDH089A PWB(PCB) ASSEMBLY,DISPLAY YDRV ASSY HAND INSERT 50X3 YDRV BOTTOM204 6871QLH049A PWB(PCB) ASSEMBLY,DISPLAY XRLT ASSY HAND INSERT 50X3 X-LEFT(TCP)205 6871QXH030A PWB(PCB) ASSEMBLY,DISPLAY XRCT ASSY HAND INSERT _ 50X3 X-CENTER (TCP)206 6871QRH057A PWB(PCB) ASSEMBLY,DISPLAY XRRT ASSY HAND INSERT 50X3 X-RIGHT (TCP)207 6871QYH039A PWB(PCB) ASSEMBLY,DISPLAY YSUS ASSY HAND INSERT FOR 50X3208 6871QZH044A PWB(PCB) ASSEMBLY,DISPLAY ZSUS ASSY HAND INSERT FOR 50X3240 4980V00C93B SUPPORTER, ASSY AL MODULE LEFT VERTICAL,50PY20 C/SKD

250 4980V00C90B SUPPORTER, ASSY AL MODULE RIGHT VERTICAL, 50PY20 C/SKD

300 3091V00737D CABINET ASSEMBLY, ASSY,50PY2R-ZB STEREO MF056B C/SKD

301 4811V00179B BRACKET ASSEMBLY, SPEAKER GRILLE LEFT,50PY20 AF04HA ASSY,FOR JERSEY

302 4811V00179A BRACKET ASSEMBLY, SPEAKER GRILLE RIGHT,50PY20 AF04HA ASSY,FOR JERSEY

303 4811V00178A BRACKET ASSEMBLY, GRILLE FRONT 50PY20 AF04HA ASSY, FOR JERSEY

305 5230V00017B FILTER(MECH), 50PX5D-UB LGM50-03 MITSUI 50 CLASS B GLASS FILTER306 4980V01176B SUPPORTER, ASSY AL FILTER TOP 50PY2R-ZB C/SKD

307 4980V01177B SUPPORTER, ASSY AL FILTER BOTTOM 50PY2D-ZB C/SKD

308 4980V01178B SUPPORTER, ASSY AL FILTER RIGHT 50PY2R-ZB C/SKD

309 4980V01179B SUPPORTER, ASSY AL FILTER LEFT 50PY2R-ZB C/SKD

400 3809V00524D BACK COVER ASSEMBLY, ASSY,50PY2DR INNER&OUTER C/SKD

401 3300V00442D PLATE, B/COVER AL NON DI-50PY21 PRESS

402 3301V00058B PLATE ASSEMBLY, ASSY REAR DECO,3300V00462 50PY2D C/SKD

430 3501V00218B BOARD ASSEMBLY, ASSY SWIVEL,50PY2R-ZB MF056B FOR WITHOUT PACKING C/SKD

501 3301V00052E PLATE ASSEMBLY, ASSY 3300V00441C(PRESS) RT-50PY21502 3301V00050F PLATE ASSEMBLY, REAR 3300V00451D(PRESS) 50PY2R-ZB520 68719MM991A PWB(PCB) ASSEMBLY,MAIN M.I MF056B 50PY2R-ZB . H2 FOR CST530 6871VSMS62A PWB(PCB) ASSEMBLY,SUB CONT MF056B HURRICANE2 RT-60PY21 CONTROL531 5020V01020A BUTTON, CONTROL 50PY20 ABS, AF-303S 1KEY STICK

550 31419SF243A CHASSIS ASSEMBLY, SUB MF056B SKD FOR EPF ASSY

551 4811V00176E BRACKET ASSEMBLY, COVER EPF&BUTTON,50PY21 MF056B .C/SKD

560 6871VSMS60A PWB(PCB) ASSEMBLY,SUB A/V MF056B HURRICANE2 AUDIO ASSAY580 6709V00001A POWER SUPPLY ASSEMBLY, PDP 50INCH AF05GA 480W 1H259W SANKEN 50 INCH LOW END PSU

600 6871VSMS51A PWB(PCB) ASSEMBLY,SUB A/V MF056B HURRICANE2 RT-60PY21 SIDE A/V601 4811V00177H BRACKET ASSEMBLY, SIDE AV,50PY2R-ZB MF056B C/SKD

EXPLODED VIEW PARTS LIST

No. Part No. DESCRIPTIONS

NSP-2100A,LF NEOFIDELITY TQFP 64P R/TPMIC39100 3P SOT223 R/LDO TYPE 2.5VBA033FP-E2 3P-SOP,TO252-3 R/3.3VKA7809R, FAIRCHILD 2P D-PAK, R/ICSC156515M-1.8TR 5P/TO-263-5BA033FP-E2 3P-SOP,TO252-3 R/3.3VBA033FP-E2 3P-SOP,TO252-3 R/3.3VTAS5122DCARG4,LF 56P/TSSOP R/TPAT76C120-UI-OJZ208,PB FREE ATMEL 208PTAS5122DCARG4,LF 56P/TSSOP R/TPBA033FP-E2 3P-SOP,TO252-3 R/3.3VMIC39100 3P SOT223 R/LDO TYPE 2.5VSC156515M-1.8TR 5P/TO-263-5 R/1.5AKIA78R05F KEC 5PIN DPAK R/1A,5V LDOSC156515M-1.8TR 5P/TO-263-5 R/1.5AMIC39100 3P SOT223 R/LDO TYPE 2.5VSII9011CLU(PB FREE) SILICON IMAGE 128P24LC02BT-I/SNG(PB FREE) MICROTHC63LVD104A 64P TQFP TRAY 10BITSOFT WARE, 1.36V ECA2 PDP MF056BHY57V561620CTP-H,LF HYNIX 54PIN,TSOPMC34063ADR2G ON SEMI SO-8P R/TPCXA2069Q QFP64 BK I2C BUS AV S/WLA7217M MFP14 SYNC SEPARATORSN74CBTLV3257DGVR 16P,TVSOP R/TPSN74CBTLV3257DGVR 16P,TVSOP R/TPSN74CBTLV3257DGVR 16P,TVSOP R/TPMSP4410K MICRONAS 80P/PQFPEPM3128ATC100-10 ALTERA 100P,QFP74HC14D 14SOP SHITTER TRIGGERSN74LVTH541PWR 20P TSSOP R/TPAT24C02N-10SI-2.7 ATMEL 8P SOICTHC63LVD103 64P TQFP TRAY 10BIT LVDS TXUDA1334BTS PHILIPS SSOP 16P R/TP74HC14D 14SOP SHITTER TRIGGERSC1565IST-1.8 3P SOT223 TPSC1592ISTRT,PB FREE SOIC-8PICL3232CBNZ INTERSIL 16P/SOP R/TPKIA78R09F KEC 5PIN DPAK R/1A,9V LDOKIA78R09F KEC 5PIN DPAK R/1A,9V LDOLM75CIMX-3 8P/SOP R/TP74HC32D 14SOP QUAD 2-INPUT OR GATEFLI8125BB-LF GENESIS 208P/PQFPAT24C32AN-10SI-2.7 8PIN SOP 32K 3.3VSST25VF040-20-4C-S2AE-T SST SOIC 8PFLI8532BD-LF GENESIS 416P/PBGA24LC256T-I/SMG(PB FREE) MICROSOFT WARE, 2.01V 5B4E PDP MF056BK4D261638F-LC50,LF TSOPII 66PK4D261638F-LC50,LF TSOPII 66PSOFT WARE, 2.00V B976 PDP MF056B

REPLACEMENT PARTS LIST

LOCA. NO PART NO DESCRIPTION

IC1202IC1203IC200IC201IC503IC503IC504IC803IC804Q100

Q1000Q1001Q1002Q1003Q1004Q101Q101Q102Q103Q104

Q1200Q200Q201Q202Q203Q204Q205Q206Q207Q300Q301Q302Q303Q304Q305Q400Q401Q402Q403Q404Q405Q407Q408Q409Q410Q411Q501Q502Q502Q503

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

BSS83 PHILIPS N-CHANNEL S/W TRBSS83 PHILIPS N-CHANNEL S/W TRBSS83 PHILIPS N-CHANNEL S/W TRBSS83 PHILIPS N-CHANNEL S/W TRNUS2401SNT1G,PNP/NPN DIGITAL TRBSS83 PHILIPS N-CHANNEL S/W TRBSS83 PHILIPS N-CHANNEL S/W TRBSS83 PHILIPS N-CHANNEL S/W TRBSS83 PHILIPS N-CHANNEL S/W TR2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KECKRA102S R/KEC SOT23 TR2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SA1504S(ASY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SA1504S(ASY) BK KEC2SA1504S(ASY) BK KEC2SC3875S(ALY) BK KEC2SA1504S(ASY) BK KEC2SA1504S(ASY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SA1504S(ASY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KECKRA102S R/KEC SOT23 TR2SC3875S(ALY) BK KECKRA102S R/KEC SOT23 TR2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KEC2SC3875S(ALY) BK KECNTS2101PT1G,P-CHANNEL,PBNTS2101PT1G,P-CHANNEL,PBNTR4501NT1G,N-CHANNEL,PBNTS2101PT1G,P-CHANNEL,PB


IC100IC1000IC1001IC1002IC1003IC1004IC1005IC101IC101IC103IC1100IC1101IC1102IC1103IC1104IC1105IC1200IC1201IC1300IC201IC202IC202IC300IC301IC301IC302IC303IC400IC401IC401IC402IC500IC501IC502IC502IC505IC506IC600IC601IC602IC603IC604IC700IC701IC703IC800IC802IC900IC901IC902

S1

0ILNR00015A0IPRPML001A0IMCRRH001A0IMCRFA010A0IPMG00027A0IMCRRH001A0IMCRRH001A0IMCRTI028C0IPRPAL005A0IMCRTI028C0IMCRRH001A0IPRPML001A0IPMG00027A0IPMGKE030A0IPMG00027A0IPRPML001A0IPRPS5005A0IMMR00018A0IMCRTH003A692791005AC0IMMRHY038E0IPMGON013B0ISO206900A0ISA721700C0ISTL00002A0ISTL00002A0ISTL00002A

0IMCRMN028B0IMCRAT005A0IPH741400E0IMCRTI021A0IMMRAL014B0IMCRTH002A0IPRPPH041A0IPH741400E0IMCRSJ001A0IPMGS1012A0IPRP00009A0IPMGKE032A0IPMGKE032A0IPRPNS054A0IPH743200A0IMCR02006A0IMMRAL025A0IMMR00004A0IMCR02005A0IMMR00024A692791081AB0IMMR00002A0IMMR00002A692791083AA

IC TRANSISTOR

- 28 -

- 29 -


D1D1005D1006D1007D1008D1009D1010D1012D1013D102D103D104D105D106D108D1100D1105D1106D1107D1109D1110D112D113D114

D1200D1201

D2D300D500D501D502D504D505D506D600

ZD300ZD301ZD400ZD600

C1000C1005C1007C1009C101C1010C1019C102C103

0DZ620009BB0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DD200009AF0DD200009AF0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DD184009AA0DS113379BA0DZ620009BB0DD226239AA0DD226239AA0DD226239AA0DD226239AA0DR050008AA0DR050008AA0DR050008AA0DD100009AM0DR050008AA0DR050008AA0DZRM00248A0DR050008AA

0CE477WF6DC0CE477WF6DC0CE107WF6DC0CE107WF6DC0CK104CF56A0CE107WF6DC0CE476WF6DC0CK104CF56A0CK104CF56A

MTZJ6.2B DO34 0.5W 6.2V 5UAKDS226 KECKDS226 KECKDS226 KECKDS226 KECKDS226 KECKDS226 KECRU2M V(1) R-TMD 400V 1.1A 20A 0.4US 10UARU2M V(1) R-TMD 400V 1.1A 20A 0.4US 10UAKDS226 KECKDS226 KECKDS226 KECKDS226 KECKDS226 KECKDS226 KECKDS226 KECKDS226 KECKDS226 KECKDS226 KECKDS226 KECKDS226 KECKDS226 KECKDS226 KECKDS226 KECKDS184 KEC - 85V - 300MA1SS133 T-72 KOREA DO34 90VMTZJ6.2B DO34 0.5W 6.2V 5UAKDS226 KECKDS226 KECKDS226 KECKDS226 KECSD05.TC R/SOD323 5V 5A 15ASD05.TC R/SOD323 5V 5A 15ASD05.TC R/SOD323 5V 5A 15AEU1ZV(1) E/EO-TMD 200V 0.25A 15ASD05.TC R/SOD323 5V 5A 15ASD05.TC R/SOD323 5V 5A 15ARLZ8.2B-TE11 R/LLDS(LL-34) 500MWSD05.TC R/SOD323 5V 5A 15A

470UF MVK 16V 20% SMD R/TP(SMD)470UF MVK 16V 20% SMD R/TP(SMD)100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD0.1UF 1608 16V 10% R/X7R100UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R


C1030C104C104

C1043C1046C1047C105

C1050C1051C106

C1064C1065C1066C1067C1068C1069C107C107

C1071C1073C108C108C108

C1082C1083C1084C1085C1087C109C109

C1098C1099C110

C1102C1105C1107C1108C111C111C1110C1115C1116C1117C1118C1119C112

C1120C1126C113C113

C1135C1136

0CE476WF6DC0CK104CF56A0CE107SF6DC0CE476WF6DC0CE477WF6DC0CE476WF6DC0CK104CF56A0CE477WF6DC0CE477WF6DC0CK104CF56A0CE476WF6DC0CE476SF6DC0CE476SF6DC0CE476SF6DC0CE476SF6DC0CE476SF6DC0CK104CF56A0CE107SF6DC0CE477WF6DC0CE477WF6DC0CK105DF64A0CK104CF56A0CE227SF6DC0CE476SF6DC0CE476SF6DC0CE476SF6DC0CE476SF6DC0CE477WF6DC0CK104CF56A0CK105DF64A0CE476SF6DC0CE476SF6DC0CK104CF56A0CE476SF6DC0CE476WF6DC0CE107WF6DC0CE107WF6DC0CK104CF56A0CK105DF64A0CE477WF6DC0CE477DJ618

0CE477WF6DC0CE227VF6DC0CE477WF6DC0CE477DJ6180CK104CF56A0CE227VF6DC0CE477WF6DC0CK104CF56A0CE107SF6DC0CE107WF6DC0CE107SF6DC

47UF MVK 16V 20% R/TP(SMD) SMD0.1UF 1608 16V 10% R/X7R100UF MVG 16V 20% SMD R/TP47UF MVK 16V 20% R/TP(SMD) SMD470UF MVK 16V 20% SMD R/TP(SMD)47UF MVK 16V 20% R/TP(SMD) SMD0.1UF 1608 16V 10% R/X7R470UF MVK 16V 20% SMD R/TP(SMD)470UF MVK 16V 20% SMD R/TP(SMD)0.1UF 1608 16V 10% R/X7R47UF MVK 16V 20% R/TP(SMD) SMD47UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R100UF MVG 16V 20% SMD R/TP470UF MVK 16V 20% SMD R/TP(SMD)470UF MVK 16V 20% SMD R/TP(SMD)1UF 2012 16V 20% F(Y5V) R/TP0.1UF 1608 16V 10% R/X7R220UF MVG 16V 20% R/TP(SMD) SMD47UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP470UF MVK 16V 20% SMD R/TP(SMD)0.1UF 1608 16V 10% R/X7R1UF 2012 16V 20% F(Y5V) R/TP47UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R47UF MVG 16V 20% SMD R/TP47UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD0.1UF 1608 16V 10% R/X7R1UF 2012 16V 20% F(Y5V) R/TP470UF MVK 16V 20% SMD R/TP(SMD)470UF STD 35V 20% FL 5470UF MVK 16V 20% SMD R/TP(SMD)220UF MV 16V 20% R/TP(SMD) SMD470UF MVK 16V 20% SMD R/TP(SMD)470UF STD 35V 20% FL 50.1UF 1608 16V 10% R/X7R220UF MV 16V 20% R/TP(SMD) SMD470UF MVK 16V 20% SMD R/TP(SMD)0.1UF 1608 16V 10% R/X7R100UF MVG 16V 20% SMD R/TP100UF MVK 16V 20% R/TP(SMD) SMD100UF MVG 16V 20% SMD R/TP

CAPACITOR

For Capacitor & Resistors,the charactors at 2nd and 3rddigit in the P/No. means asfollows;

CC, CX, CK, CN : CeramicCQ : PolyestorCE : Electrolytic

RD : Carbon FilmRS : Metal Oxide FilmRN : Metal FilmRF : Fusible

DIODE

- 30 -


C1137C1138C114C1148C1149C1150C1151C1154C1159C116C1162C1165C1166C117C117C118C1185C1186C1187C1188C1189C119C119C1190C1191C1192C1193C1194C1195C1199C120C1200C1201C121C122C1225C123C1230C1231C1245C1247C127C128C129C130C1302C1304C1306C1309C131C1311C1312

0CE107WF6DC0CE107WF6DC0CK104CF56A0CE476WF6DC0CE107SF6DC0CE107SF6DC0CE107SF6DC0CE476WF6DC0CE476SF6DC0CK103CK56A0CE107SF6DC0CE107SF6DC0CE107SF6DC0CE227SF6DC0CE107SF6DC0CE106SF6DC0CE476SF6DC0CE476SF6DC0CE476SF6DC0CE107SF6DC0CE107SF6DC0CK104CF56A0CE106SF6DC0CE107SF6DC0CE107SF6DC0CE107SF6DC0CE107SF6DC0CE477WF6DC0CE107SF6DC0CE107SF6DC0CE106SF6DC0CE106SF6DC0CE106SF6DC0CE106SF6DC0CK103CK56A0CE106SF6DC0CC102CK41A0CK105DF64A0CK105DF64A0CE106SF6DC0CE476WF6DC0CE108DJ6180CF4741L4380CE227SF6DC0CE227SF6DC0CE107WF6DC0CE476WF6DC0CE476WF6DC0CE107WF6DC0CE476SF6DC0CE107SF6DC0CE107WF6DC

100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD0.1UF 1608 16V 10% R/X7R47UF MVK 16V 20% R/TP(SMD) SMD100UF MVG 16V 20% SMD R/TP100UF MVG 16V 20% SMD R/TP100UF MVG 16V 20% SMD R/TP47UF MVK 16V 20% R/TP(SMD) SMD47UF MVG 16V 20% SMD R/TP0.01UF 1608 50V 10% R/X7R100UF MVG 16V 20% SMD R/TP100UF MVG 16V 20% SMD R/TP100UF MVG 16V 20% SMD R/TP220UF MVG 16V 20% R/TP(SMD) SMD100UF MVG 16V 20% SMD R/TP10UF MVG 16V 20% R/TP(SMD) SMD47UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP100UF MVG 16V 20% SMD R/TP100UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R10UF MVG 16V 20% R/TP(SMD) SMD100UF MVG 16V 20% SMD R/TP100UF MVG 16V 20% SMD R/TP100UF MVG 16V 20% SMD R/TP100UF MVG 16V 20% SMD R/TP470UF MVK 16V 20% SMD R/TP(SMD)100UF MVG 16V 20% SMD R/TP100UF MVG 16V 20% SMD R/TP10UF MVG 16V 20% R/TP(SMD) SMD10UF MVG 16V 20% R/TP(SMD) SMD10UF MVG 16V 20% R/TP(SMD) SMD10UF MVG 16V 20% R/TP(SMD) SMD0.01UF 1608 50V 10% R/X7R10UF MVG 16V 20% R/TP(SMD) SMD1000PF 1608 50V 5% R/NP01UF 2012 16V 20% F(Y5V) R/TP1UF 2012 16V 20% F(Y5V) R/TP10UF MVG 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD1000UF STD 35V M FL TP50.47UF D 63V 5% 5 M/PE NI220UF MVG 16V 20% R/TP(SMD) SMD220UF MVG 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD47UF MVG 16V 20% SMD R/TP100UF MVG 16V 20% SMD R/TP100UF MVK 16V 20% R/TP(SMD) SMD


C1313C1314C1315C1316C1317C1318C1333C1334C1335C1338C135

C1410C1411C142C143C172C173C174C175C176C177C178C179C184C185C192C193C196C201C202C203C203C204C204C205C206C207C208C208C209C210C211C214C215C221C238C241C300C301C302C303C304

0CE107WF6DC0CE107WF6DC0CE107WF6DC0CE476SF6DC0CE476SF6DC0CE476SF6DC0CE336VF6DC0CE336VF6DC0CE336VF6DC0CE336VF6DC0CE476SF6DC0CE475SK6DC0CE475SK6DC0CF4741L4380CF4741L4380CF4741L4380CF4741L4380CK105DF64A0CK105DF64A0CK105DF64A0CK105DF64A0CE106SK6DC0CE108DJ6180CE106SK6DC0CE108DJ6180CE108DJ6180CF4741L4380CF4741L4380CK104CF56A0CK104CF56A0CK104CF56A0CE475SK6DC0CK104CF56A0CE477WF6DC0CK104CF56A0CK104CF56A0CK104CF56A0CK104CF56A0CE477WF6DC0CK104CF56A0CE475SK6DC0CE477WF6DC0CE106SF6DC0CE475SK6DC0CE477WF6DC0CE107WF6DC0CE476SK6D80CE107SF6DC0CK104CF56A0CK104CF56A0CK104CF56A0CK104CF56A

100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD47UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP33UF MV 16V 20% R/TP(SMD) SMD33UF MV 16V 20% R/TP(SMD) SMD33UF MV 16V 20% R/TP(SMD) SMD33UF MV 16V 20% R/TP(SMD) SMD47UF MVG 16V 20% SMD R/TP4.7UF MVG 50V 20% SMD R/TP4.7UF MVG 50V 20% SMD R/TP0.47UF D 63V 5% 5 M/PE NI0.47UF D 63V 5% 5 M/PE NI0.47UF D 63V 5% 5 M/PE NI0.47UF D 63V 5% 5 M/PE NI1UF 2012 16V 20% F(Y5V) R/TP1UF 2012 16V 20% F(Y5V) R/TP1UF 2012 16V 20% F(Y5V) R/TP1UF 2012 16V 20% F(Y5V) R/TP10UF MVG 50V 20% SMD R/TP1000UF STD 35V M FL TP510UF MVG 50V 20% SMD R/TP1000UF STD 35V M FL TP51000UF STD 35V M FL TP50.47UF D 63V 5% 5 M/PE NI0.47UF D 63V 5% 5 M/PE NI0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R4.7UF MVG 50V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R470UF MVK 16V 20% SMD R/TP(SMD)0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R470UF MVK 16V 20% SMD R/TP(SMD)0.1UF 1608 16V 10% R/X7R4.7UF MVG 50V 20% SMD R/TP470UF MVK 16V 20% SMD R/TP(SMD)10UF MVG 16V 20% R/TP(SMD) SMD4.7UF MVG 50V 20% SMD R/TP470UF MVK 16V 20% SMD R/TP(SMD)100UF MVK 16V 20% R/TP(SMD) SMD47UF MVG,MC 50V 20% SMD TAPPING100UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R




- 31 -



0CE226SF6DC0CK104CF56A0CE107SF6DC0CK104CF56A0CK104CF56A0CE476SF6DC0CK104CF56A0CK104CF56A0CK225DFK4A0CK225DFK4A0CK225DFK4A0CK225DFK4A0CK225DFK4A0CK225DFK4A0CK225DFK4A0CK225DFK4A0CK225DFK4A0CK225DFK4A0CE476SF6DC0CE105SK6DC0CE105SK6DC0CE476WF6DC0CE226SF6DC0CK104CF56A0CK104CF56A0CK104CF56A0CK104CF56A0CK104CF56A0CK104CF56A0CK104CF56A0CK104CF56A0CE335VK6DC0CE226SF6DC0CE335VK6DC0CE107WF6DC0CE106SF6DC0CE106SF6DC0CE475SK6DC0CE475SK6DC0CE476SF6DC0CK104CF56A0CE226SF6DC0CE476SF6DC0CK104CF56A0CE107SF6DC0CE226SF6DC0CK104CF56A0CE476SF6DC0CK104CF56A0CE226SF6DC0CK104CF56A0CE107SF6DC

22UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R100UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R47UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R2.2UF 2012 16V 20%,-20% F(Y5V) R/TP2.2UF 2012 16V 20%,-20% F(Y5V) R/TP2.2UF 2012 16V 20%,-20% F(Y5V) R/TP2.2UF 2012 16V 20%,-20% F(Y5V) R/TP2.2UF 2012 16V 20%,-20% F(Y5V) R/TP2.2UF 2012 16V 20%,-20% F(Y5V) R/TP2.2UF 2012 16V 20%,-20% F(Y5V) R/TP2.2UF 2012 16V 20%,-20% F(Y5V) R/TP2.2UF 2012 16V 20%,-20% F(Y5V) R/TP2.2UF 2012 16V 20%,-20% F(Y5V) R/TP47UF MVG 16V 20% SMD R/TP1UF MVG 50V 20% SMD R/TP1UF MVG 50V 20% SMD R/TP47UF MVK 16V 20% R/TP(SMD) SMD22UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R3.3UF MV 50V 20% R/TP(SMD) SMD22UF MVG 16V 20% SMD R/TP3.3UF MV 50V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD10UF MVG 16V 20% R/TP(SMD) SMD10UF MVG 16V 20% R/TP(SMD) SMD4.7UF MVG 50V 20% SMD R/TP4.7UF MVG 50V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R22UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R100UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R47UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R22UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R100UF MVG 16V 20% SMD R/TP



0CE476SF6DC0CK104CF56A0CK104CF56A0CE105VK6DC0CK104CF56A0CE105VK6DC0CK104CF56A0CE226SF6DC0CE476SF6DC0CK104CF56A0CE226SF6DC0CE476SF6DC0CK104CF56A0CE226SF6DC0CE476SF6DC0CK104CF56A0CE476SF6DC0CK103CK56A0CE476SF6DC0CK103CK56A0CE476WF6DC0CK103CK56A0CK104CF56A0CK103CK56A0CK104CF56A0CK104CF56A0CK103CK56A0CK104CF56A0CE107WF6DC0CE476WF6DC0CE476WF6DC0CE476WF6DC0CE476WF6DC0CE476WF6DC0CE107SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE106SF6DC0CE226SF6DC

47UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R1UF MV 50V 20% R/TP(SMD) SMD0.1UF 1608 16V 10% R/X7R1UF MV 50V 20% R/TP(SMD) SMD0.1UF 1608 16V 10% R/X7R22UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R22UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R22UF MVG 16V 20% SMD R/TP47UF MVG 16V 20% SMD R/TP0.1UF 1608 16V 10% R/X7R47UF MVG 16V 20% SMD R/TP0.01UF 1608 50V 10% R/X7R47UF MVG 16V 20% SMD R/TP0.01UF 1608 50V 10% R/X7R47UF MVK 16V 20% R/TP(SMD) SMD0.01UF 1608 50V 10% R/X7R0.1UF 1608 16V 10% R/X7R0.01UF 1608 50V 10% R/X7R0.1UF 1608 16V 10% R/X7R0.1UF 1608 16V 10% R/X7R0.01UF 1608 50V 10% R/X7R0.1UF 1608 16V 10% R/X7R100UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD100UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP10UF MVG 16V 20% R/TP(SMD) SMD22UF MVG 16V 20% SMD R/TP




- 32 -


C833C834C835C836C837C838C839C840C851C853C884C896C901C904C905C930C950R1007R1009R1010R1019R1030R1043R1047R1064R1105R1107R1108R1135R1137R1138R1148R1154R1247R1302R1304R1306R1309R1312R1313R1314R1315R238R402R462R527R610R614R615R620R621R622

0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE226SF6DC0CE107WF6DC0CE107WF6DC0CE107WF6DC0CE476WF6DC0CE476WF6DC0CE476WF6DC0CE476WF6DC0CE476WF6DC0CE476WF6DC0CE107WF6DC0CE107WF6DC0CE107WF6DC0CE107WF6DC0CE107WF6DC0CE476WF6DC0CE476WF6DC0CE476WF6DC0CE107WF6DC0CE476WF6DC0CE476WF6DC0CE107WF6DC0CE107WF6DC0CE107WF6DC0CE107WF6DC0CE107WF6DC0CE107WF6DC0CE476WF6DC0CE107WF6DC0CE476WF6DC0CE107WF6DC0CE476WF6DC0CE476WF6DC0CE476WF6DC0CE476WF6DC0CE476WF6DC

22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP22UF MVG 16V 20% SMD R/TP100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD100UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD47UF MVK 16V 20% R/TP(SMD) SMD


L1000L105L106L107L108L109L110

L1101L1102L1103L1104L111L112

L1124L503

C1C2C3C4C5C6C7C8C9

C10C11C12

CARD301CARD302

CD301CD302JK500JK601P100P101P102P103P104P105P106P106P1100P1300P1302P1303P400P401P401

6140VB0004B6140VB0032A6140VB0032A6140VB0032A6140VB0032A6140VB0032A6140VB0032A6140VB0004B6140VB0004B6140VB0004B6140VB0004B6140VB0032A6140VB0032A6140VB0004B6140VB0003A

366-036B387-J04T387-J10K387-J10R387-J12K387-J12M

6631V00045B6631V12036P6631V25032E6631V25083A6631V39015E6631V39016E6630C00010B6630C00012C6630C00010B6630C00012C6630G70016A6630G70017A

366-921L6630VF01810

366-932B366-932C366-932B366-932C366-921L366-921J366-921J

6602T12007D6630VF00710

366-921J366-921L

6602V12001H366-921J

26UH 1UEWPHY 22.5TURN YL-9N 0.4DBF-1015A 15.5UH 10PIE DIGITAL AUDIODBF-1015A 15.5UH 10PIE DIGITAL AUDIODBF-1015A 15.5UH 10PIE DIGITAL AUDIODBF-1015A 15.5UH 10PIE DIGITAL AUDIODBF-1015A 15.5UH 10PIE DIGITAL AUDIODBF-1015A 15.5UH 10PIE DIGITAL AUDIO26UH 1UEWPHY 22.5TURN YL-9N 0.426UH 1UEWPHY 22.5TURN YL-9N 0.426UH 1UEWPHY 22.5TURN YL-9N 0.426UH 1UEWPHY 22.5TURN YL-9N 0.4DBF-1015A 15.5UH 10PIE DIGITAL AUDIODBF-1015A 15.5UH 10PIE DIGITAL AUDIO26UH 1UEWPHY 22.5TURN YL-9N 0.4LQH31CN4R7M03L 4.7UH 10% 1UEW

STAPLE . . . .4P 2.5MM 1200MM H-H UL1185AWG2610P 2.5MM 600MM H-H UL1185AWG2610P 2.5MM 1400MM H-H UL1185AWG2612P 2.5MM 600MM H-H UL1185AWG2612P 2.5MM 800MM H-H UL1185AWG2610P SPECIAL 150MM H-H UL1007AWG2410P 1.25MM 1000MM H-H UL1533AWG283P 2.5MM 300MM H-H UL1007 AWG267P 2.5MM 100MM H-H UL1007 AWG244P 3.96MM 300MM H-H UL1007AWG1810P 3.96MM 300MM H-H UL1007AWG18152-1001005000-CV TAISOL 68P 0.7MM149-1110012901 TAISOL 50P 0.635MM152-1001005000-CV TAISOL 68P 0.7MM149-1110012901 TAISOL 50P 0.635MMA03-7071-094 SPG 15P 2.29MMA02-0915-101 SPG 9P 2.54MMGIL-G-12P LGC 12PIN 2.54MM STICK12505WR-10 YEONHO 10P 1.25MMIL-G-03P LGC 2.5MM S/T STICKIL-G-04P LGC 2.5MM S/T STICKIL-G-03P LGC 2.5MM S/T STICKIL-G-04P LGC 2.5MM S/T STICKGIL-G-12P LGC 12PIN 2.54MM STICKGIL-G-10P LGC 10PIN 2.54MM STICKGIL-G-10P LGC 10PIN 2.54MM STICKGT121-31P-TD LGC 31P 1.25MM DUAL S/T12505WS-10A00 YEONHO 10P 1.25MMGIL-G-10P LGC 10PIN 2.54MM STICKGIL-G-12P LGC 12PIN 2.54MM STICK1.25MM 12PINP 53261-1290 JPN-MOLEXGIL-G-10P LGC 10PIN 2.54MM STICK




COIL

CONNECTOR

- 33 -


P501P502P600P601P602P802P803

AR1200AR1201AR1202AR1203AR1204AR1205AR1301AR1302AR1303AR1304AR1305AR1306AR700AR701AR702AR703AR704AR705AR806AR807AR808AR809AR810AR811AR812AR813AR814AR815AR816AR817R230R618

SW1SW2SW3SW4SW5SW6

SW700SW800

6630VF018106602T12007D

366-932B366-932B366-932B366-932C

6602T12007D

0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001D0RRZVTA001B0RRZVTA001B0RRZVTA001B0RRZVTA001B0RRZVTA001B0RRZVTA001B0RRZVTA001B0RRZVTA001B0RRZVTA001B0RRZVTA001B0RRZVTA001B0RRZVTA001B0RD0331H6090RD0152H609

140-313B140-313B140-313B140-313B

6600H0000086600H0000086600VR1004A6600VR1004A

12505WR-10 YEONHO 10P 1.25MMGT121-31P-TD LGC 31P 1.25MM DUAL S/TIL-G-03P LGC 2.5MM S/T STICKIL-G-03P LGC 2.5MM S/T STICKIL-G-03P LGC 2.5MM S/T STICKIL-G-04P LGC 2.5MM S/T STICKGT121-31P-TD LGC 31P 1.25MM DUAL S/T

22 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E2422 OHM 1 / 16 W 1608 5% R/4P E24MNR14-E0A-J-510 R OHM 51MNR14-E0A-J-510 R OHM 51MNR14-E0A-J-510 R OHM 51MNR14-E0A-J-510 R OHM 51MNR14-E0A-J-510 R OHM 51MNR14-E0A-J-510 R OHM 51MNR14-E0A-J-510 R OHM 51MNR14-E0A-J-510 R OHM 51MNR14-E0A-J-510 R OHM 51MNR14-E0A-J-510 R OHM 51MNR14-E0A-J-510 R OHM 51MNR14-E0A-J-510 R OHM 513.3 OHM 1/2 W 5.00% TA5215 OHM 1/2 W 5.00% TA52

2LEAD 160G(TA) 5V 0.001A HORIZONTAL .G2LEAD 160G(TA) 5V 0.001A HORIZONTAL .G2LEAD 160G(TA) 5V 0.001A HORIZONTAL .G2LEAD 160G(TA) 5V 0.001A HORIZONTAL .GKTM-1502D 12VDC 50MA JOYSTICK SWITCHKTM-1502D 12VDC 50MA JOYSTICK SWITCHSKHMPW 5P J-ALPS .V .A HORIZONTAL .GSKHMPW 5P J-ALPS .V .A HORIZONTAL .G


L100L100

L1004L1005L1006L1007L1008L1009L101

L1010L1011L1012L1013L1014L1015L1016L1017L1018L1019L102

L1020L1021L1022L1023L1024L103L104L110

L1105L1106L1107L1108L1109L111L1110L1111L1112L1113L1115L1116L1117L1118L1119L1120L1121L1122L1123L1125L1126L1127

6200J0000136210VC0006A6200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136210VC0006A6200J0000136200J0000136200J0000136200J0000136200J0000136210VC0006A6210VC0006A6200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J000013

MLB-321611-0500P-N2 R/500 OHM BEADFBMH3216 HM501NT 3.2X1.6X1.6MM R/TPMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADFBMH3216 HM501NT 3.2X1.6X1.6MM R/TPMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADFBMH3216 HM501NT 3.2X1.6X1.6MM R/TPFBMH3216 HM501NT 3.2X1.6X1.6MM R/TPMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEAD

FILTER & CRYSTAL

SWITCH

RESISTOR




- 34 -


L1128L1129L113L114L115L119L120L1204L1205L1206L1207L1208L1209L121L122L123L124L125L126L200L201L202L203L204L300L301L302L400L401L403L405L500L501L502L502L503L506L604L606L607L803L805X101X102X1200X300X400X700X800

JK100

6200J0000136200J0000136210VC0006A6200JB8010L6200JB8010L6200JB8010L6200JB8010L6200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136210VC0005A6210VC0005A6210VC0005A6210VC0005A6210VC0005A6200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136200JB8010L6200J0000136200J0000136200J0000136200J0000136200J0000136200VJT006A6200JB8010L6200VJT006A6200JB8010L6200J0000136200J0000136200J0000136200J0000136200J0000136200J0000136202VDT002A6212AB2851A6212AB2845A

166-E02F156-A02M

6212AB2844A6212AB2844A

6612J00043C

MLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADFBMH3216 HM501NT 3.2X1.6X1.6MM R/TPMLB-201209-1000L-N2 R/1000OHM 350MAMLB-201209-1000L-N2 R/1000OHM 350MAMLB-201209-1000L-N2 R/1000OHM 350MAMLB-201209-1000L-N2 R/1000OHM 350MAMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADBK2125 HS 750 2X1.25X0.85MM R/TPBK2125 HS 750 2X1.25X0.85MM R/TPBK2125 HS 750 2X1.25X0.85MM R/TPBK2125 HS 750 2X1.25X0.85MM R/TPBK2125 HS 750 2X1.25X0.85MM R/TPMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-201209-1000L-N2 R/1000OHM 350MAMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADSTC222D NIIGATA 50VOLT 4A 2200PFMLB-201209-1000L-N2 R/1000OHM 350MASTC222D NIIGATA 50VOLT 4A 2200PFMLB-201209-1000L-N2 R/1000OHM 350MAMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADMLB-321611-0500P-N2 R/500 OHM BEADRESONATOR,CRYSTAL SX-1SMD 12.0MHZRESONATOR,CRYSTAL ABLS-18.5625MHZRESONATOR,CRYSTAL ABLS-27.000MHZRESONATOR,CERAMIC CSBLA500KECZF09-B0RESONATOR,CRYSTAL HC49U 18.432MHZRESONATOR,CRYSTAL ABLS-19.6608MHZRESONATOR,CRYSTAL ABLS-19.6608MHZ

UPJ-R1-031 S/T,SCART,SHIELD,SPRING


JK101JK102JK102JK103JK104

JK1200JK400JK502JK600

P100P1001P103P300

A1A2A3A4

C13C14C15C16C17

D1003D1103TU200TU201

6612J00043C6613V00026A6612J00043C6612J10012A6612J00038B6612B00015B6612J00037A6612F00087A6612F00087A

366-922C366-921F366-922L366-922L

3828VA0558F6710V00142D6410VEH003K4972V00178A

68509A0001B6850J00005C6850J00005H6851V00019A6851V00022C0DL233309AC0DL233309AC6700MF0012B6700MF0012A

UPJ-R1-031 S/T,SCART,SHIELD,SPRINGUJB-03-28A 6613V00004S+SHIEL+SCREWUPJ-R1-031 S/T,SCART,SHIELD,SPRINGUJB-05-02C COMPONENT GR/BL/RD/WH/RDUJB-03-25B 6612J00038A+RED S/W+SHIELDDC1R019WDH JAE 0.5MM,19PIN+2PINUJB-02-12A 2P RCA VERTICAL+SHIELDUEJ-CV-032 EAR JACK 10MMUEJ-CV-032 EAR JACK 10MM

WAFER, IL-G-04P LGC 2.5MM R/AWAFER, IL-G-07 LGC 2.5mm S/TWAFER, IL-G-12P LGC 2.5mm R/AWAFER, IL-G-12P LGC 2.5mm R/A

MANUAL, USER MF056B 142D TXREMOTE CONTROLLER, MF056B 52KEYPOWER CORD, 003C-G/SOURCINGFIXER, WALL ASSY PDP SET

CABLE,COAXIAL TO PLUG UL1365AWG26CABLE,DVI LVDS UL20276 AWG30 600MMCABLE,DVI LVDS UL20276 AWG30 1000MMCABLE,COAXIAL RF CONN 4AC208A0CABLE,COAXIAL UL1365#26 VW-1LED, SAM2333 GREEN:10MCD, RED:6MCDLED, SAM2333 GREEN:10MCD, RED:6MCDTUNER, TAFM-W102P PHONO SUBTUNER, TAUM-W101P PHONO MAIN

ACCESSORIES

MISCELLANEOUS

JACK

WAFER

PRINTED CIRCUIT BOARDMAIN (TOP) MAIN (BOTTOM) EPF (TOP)

EPF (BOTTOM)

CONTROL

SIDE A/V SPEAKER(TOP) SPEAKER(BOTTOM)

Aug., 2005Printed in KoreaP/NO : 3828VD0209W

#EV#

50py2r lg plasma tv mf-056b

Documents