7083 137-00

ECBN 5066

GBInstallation instructionsfor NoFrost combined refrigerator-freezers Page 14

14

Setting up• Avoidpositioningtheapplianceindirectsunlightornearcook-ers,radiatorsandsimilarsourcesofheat.

• Theflooronwhichtheappliancestandsshouldbehorizontalandlevel.

• Theventilationgrillesshouldnotbeobstructed.Alwaysensurethatthereisgoodventilationandthattheoutwardflowingairisabletoescape.

• StandardEN378specifiesthattheroominwhichyouinstallyourappliancemusthaveavolumeof1m³per8gofR600arefrigerantusedintheappliance,soastoavoidtheformationofinflammablegas/airmixturesintheroomwheretheapplianceislocatedintheeventofaleakintherefrigerantcircuit.Thequantityofrefrigerantusedinyourapplianceis indicatedonthetypeplateontheinsideoftheappliance.

Appliance ventingTherequiredairflowisdirectedthroughtheplinth.

Itisimportanttousetheprovidedventilationgrillefortheventila-tionopening.

Thisopeningmustnotbecov-ered.

Electrical connectionOnlyoperatetheappliancewithalternating current (AC).Thepermissiblevoltageandfrequencyareindicatedonthetypeplate.ThepositionofthetypeplateisshowninthesectionentitledDescription of the appliance(intheoperatinginstructions).Thesocketmustbeproperlyearthedandprotectedbyafuse.Thetrippingcurrentofthefusemustbebetween10Aand16A.

Donotconnecttheapplianceusinganexten-sioncableorextensionsocket.

Donotusestand-aloneinverters(conversionof direct current to alternating/three-phasecurrent)orenergy-savingplugs.Riskofdam-agetotheelectroniccontrolsystem!

Door swing clearancePleaseallow fordoorswingclear-anceatlocationsnexttoawall.The illustrated measurement iswithoutmounteddoorpanel.

Besuretoaddyourpanelthicknessandhandledepthtothismeasure-mentinordertoavoidinterferences.

15

Appliance dimensions

A=76mmB=2027mmC=757mmD=610mmE=1413mmF=952mm

Installation dimensions

This typeof dimensionlineindicatestheheightmeasuredfromthefloor.

GB

Theicemakerisfittedinthefreezercompartmentofthecom-bined refrigerator-freezer. It must be connected to the mainswatersupplytowork.

Thewater shut-off valvemust be positionedwithin the areasmarkedingrey.

ImportantDonotinstalltheshut-offvalvebehindtheappliance.

WARNING! The water shut-off valve must not be posi-tioned directly above the socket!

The gap between the water shut-off valve and the socket must comply with the regulations of the country in which the appliance is used!

1Inthisarea,thepowercordcomesoutoftheappliancerear. Freelengthofthepowercord=2500 mm Choosethepositionofthesocketconsideringthesespeci-

fications.

Thesocketmustnotbesituatedbehind theapplianceandmustbeeasilyaccessible.

16

Mounting the anti-tipping device

WARNING! The supplied anti-tipping bracket must be in-stalled in all cases. This prevents the appliance from tipping over when the fully loaded door is opened.

Installation1. Markthecentrelineoftheapplianceonthefloor. Aligntheanti-tippingbracketcentretothecentreline.

CAUTION! Ensure that there are no electric cables or water pipes in the wall section to which the anti-tipping bracket is to be secured. These could be damaged during installation.

2. Secure the anti-tipping bracket. See section entitled "Anti-tipping device mounting options".

Important!If the floor slopes down sideways, the anti-tipping bracket must be fitted horizontally. Lay down spacers in the appropriate positions.

Wall

Floor

Anti-tipping device mounting options

Wall

Floor

Securingtothewallusing3screws.Whensecuringtheanti-tippingdevicetocon-cretewalls,usesuitableplugs.

The screws (6 x 60) areincludedintheaccessorypack.

Securingtothefloorusing3screws.Whensecuringtheanti-tippingdevicetoaconcretefloor,usesuitableplugs.

17

3.

4.

Connection to the water supply

Safety instructions and warnings•Donotconnecttothewatersupplywhilethecombinedrefrig-erator-freezerisconnectedtotheelectricitysupply.

•The connection to the mains water supply may only be made by trained personnel.

•The water quality must comply with the drinking water directives of the country in which the appliance is used.

• The icemaker isdesignedexclusively tomake icecubes inquantitiesrequiredbyahouseholdandmayonlybeoperatedwithwatersuitableforthispurpose.

• Allrepairsandworkontheicemakermayonlybecarriedoutbycustomerservicepersonnelorothertrainedpersonnel.

•The manufacturer cannot accept liability for damage caused by a faulty connection to the mains water supply.

Water pressureThe water pressure must be between 0.15 and 0.6 MPa (1.5 - 6 bar).

Important!Ifthewaterfilterisinsertedintheappliance,thewater pressuremustliebetween0.3 and 0.6 MPa (3 - 6 bar).Ifthewaterpressurewiththeinsertedwaterfilteristoolow,thismaycausetheicemakertomalfunction.

Thewatersupplytotheappli-ancemustbe throughacoldwaterpipethatcanwithstandthe operating pressure andcomplies with the hygieneregulations.Forthis,usethestainlesssteelhosesupplied(length3m).

2.

GBInstalling the appliance1. Placetheapplianceinfrontoftheinstallationrecess.

2.Applycoverstripsabove,be-tweenandbelowthesecuringplatesonthesidewallsoftheappliance.

• Cutthecoverstripstotherightlengthforthispurpose.

• Fittheadhesivecoverstripsleavingagapof6mmtoeachsecuringplate.

3. Insert the bent section of the hosethroughtheopeningattherightsideoftheappliance.

4. Connect the hose to the solenoidvalveatthefrontsideoftheappliance.

18

6. Routethemainscabletowardsthesocket.7. Routethewaterhosetowardsthewatershut-offvalve.

WARNING! Do not connect the appliance to the power supply until the installation has been completed.

CAUTION! Lay the mains cable and the water hose in such a way that they will not be damaged when the appliance is slid into the installation recess.

6. 7.

Important!Aftertheicemakerhasbeenswitchedon,thewatersupplysystemmustbebled.SeethesectionBleeding the ice makerintheoperatinginstructions.

8.5.

5. Locatethewaterhoseintotherailoftheapplianceplinth.

8. Pushtheapplianceslowlyintotherecesssothattheapplianceplinthengagesintheanti-tippingbracket.

9. Fillthehosewithwaterandconnecttotheshut-offvalve.

Opentheshut-offvalveandcheckthesystemforleakage.

19

Adjusting the refrigerator doorThelateraltiltoftherefrigeratordoorcanbeadjustedifrequired.Undoscrews1.Adjustthelateraltiltusingthegrubscrew2 (AllenkeyA/F2.5).

Adjusting the front of the drawerIfrequired,thefrontofthefreezerdrawerscanbeadjusted.Transfer thescrewsshown in the illustration (on the left- andright-handsidesofthefreezerdrawer) individuallytothelongslotsbelow.Tightenthescrewsoncethefrontof thedrawer is in therightposition.

Side view of the freezer drawer pulled out

GBLevelling the appliance1. Adjusttheheightoftheapplianceatthefrontbytwistingtheadjustablefeet1.Usethespannerprovided.

Turnthespanneranticlockwisetoraisetheappliancefrontandclockwisetolowerit.

Positionthespanneraccordingly(1).

2. Adjusttheheightoftheapplianceattherearbyturningtheadjustingbolts2.

Fastening the appliance in the recessOnceintherecess,securetheappliancetothebodyoftheunitusingthesecuringplates(4x16screws).

Then click the covers supplied intoplace.

20

5.

4. Thefrontedgeofthebracketsis flush with the front of theventilationgrille.

Adjustthesupportsaccordingly.

2.

7.

4.

6.

1.

3.

Mounting the ventilation grille Pulloutthebottomfreezerdrawer.1. Remove the protective film from the dust filter.Insertthefilteratthebottom,pressthebuttondownandclickthefilterintoplace.

2.Remove the locking pins ofbothsupports.Thesupportsare provided with the appli-anceaccessorypack.

3. Insertthesupportsfortheventilationgrilleontheleftandrightsidesinthemotorcompartment.

5. Insertthelockingpinstoblockthesup-ports.

6. Installtheventilationgrille. Thegrillehasboltsontheinside(seedetailintheillustrationbelow).Theseboltsmustbe inserted into theholesof thesupports.

7. Adjusttheheightoftheventilationgrille.• Loosen thegrubscrewsat the frontof thegrille (AllenkeyA/F2.5).

• Adjusttheventilationgrilletothedesiredheight.• Tightenthegrubscrews.

21

Panel dimensionsMin.panelthickness=16mmMax.panelthickness=19mm

Maximum panel weightRefrigeratorpanel=27kgFreezerdrawerpanel=10kg

Removing the mounting accessories from the refrigerator doorRemovethecover1andunscrewthetopandbottomattach-mentbrackets2fromtherefrigeratordoor.Theseattachmentbracketswillbemountedontotherefrigeratordoorpanel.

Important!The securing nuts are needed for re-mounting the pre-assembled door panel onto the refrigerator door.

Removing the mounting accessories from the freezer drawersUnscrewtheattachmentbrackets3fromthefreezerdrawers.These attachment bracketswill bemounted onto the freezerpanels.

Important!The screws are needed for re-mounting the pre-assembled freezer panels onto the freezer drawers.

GB

Important!To avoid collisions when opening the refrigerator door, the lateral distance between the door and the panels must be at least 6 mm.

22

Mounting the attachment brackets onto the door panels

1. Drawaline1041mmfromthebottomedgeofthedoorpanel.

2. Drawafurtherline107.5mmfromthebottomedgeofthedoorpanel.3. Alignoneoftherefrigeratordoorattachmentbracketstothetopline,asshownintheillustrationbelow,andsecurewithatleast6screws(4x14).

4. Alignthesecondrefrigeratordoorattachmentbrackettothebottomline,asshownintheillustrationbelow,andsecurewithatleast6screws(4x14).

5. Secureeachoftheattachmentbracketsthathavebeenremovedfromthefreezerdrawersusing3screws(4x14),asshownintheillustrationbelow.

23

fig. D

Mounting the refrigerator panel

fig. A

fig. B

fig. C

1. Screwintheadjustingpinsontheundersideoftherefrigeratordoorcompletely(fig. A).

2. Opentherefrigeratordoorandsuspendtherefrigeratorpanelonthetopadjustingpins(fig. B).

3. Screwsecuringnutsontotheadjustingpinsandslightlytighten.

4. Closetherefrigeratordoorandchecktheheightofthepanel.5. Adjusttheheightofthepanelifnecessary.Undothesecuringnutsandusetheadjustingpinstoadjust(fig. C).

6. Adjustthepanelhorizontally(usingthelongslotsintheat-tachmentbracket)(fig. D).

7. Tightenthesecuringnuts.

GB

24

fig. E

fig. F

8. Unscrewtheadjustingpins(bottomoftherefrigeratordoor)untilthesetouchtheattachmentbracket(fig. E).

9. Screwonthesecuringnutsandtighten(fig. F). 11. Clickthetopandbottomcovers1intoplace(fig. H). Insertthecoverstripprovided2betweenrefrigeratordoor

andpanel.

fig. H

fig. G

10. Undothethreescrewsonthetopoftheattachmentbracket,adjustthedoorpanelasillustratedinfig. Gandthenretightenthescrews.Thesameprocedurecanbecarriedoutforthebottomattachmentbracket.

25

Mounting the freezer panels1. Pulloutthetopfreezerdrawerandscrewonthepre-assembledpanel.

Thesamescrewsmustbeusedasthoseusedtoscrewontheattachmentbrackets (see section entitled "Removing the mounting accessories from the freezer drawers").

2. Closethefreezerdrawerandcheckthepositionofthepanel.Adjust theheightof thepanelbyundoingthe leftandrightscrews.Tightenthescrews.

3.Pulloutthebottomfreezerdrawerandmountthepanelinthesameway.

4. Forbothdrawers,coverthegapbetweenthedrawerandthepanelwiththecoverstripssupplied.Removetheprotectivefilmfromthestripandinsertintothegapatthetop.

3.5x13mm

Changing over door hingesDoorhingesmayonlybechangedbyatrainedexpert.

WARNING! Do not try to change over the door hinges your-self. The refrigerator door hinges are fitted with strong closing springs. If the hinge accidentally snaps shut, this can lead to serious injury.

GB