80’s steampunk sunglasses - 3doodler | 3doodler · 2018. 5. 3. · the3doodler.com/community |...
TRANSCRIPT
![Page 1: 80’s Steampunk Sunglasses - 3Doodler | 3Doodler · 2018. 5. 3. · the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015 Step 1: Print out the stencils, cover it with](https://reader033.vdocument.in/reader033/viewer/2022060905/60a08db6b03dca22dc2aad02/html5/thumbnails/1.jpg)
the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015
80’s Steampunk Sunglasses
![Page 2: 80’s Steampunk Sunglasses - 3Doodler | 3Doodler · 2018. 5. 3. · the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015 Step 1: Print out the stencils, cover it with](https://reader033.vdocument.in/reader033/viewer/2022060905/60a08db6b03dca22dc2aad02/html5/thumbnails/2.jpg)
the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015
80’s Steampunk Sunglasses
Stencil
![Page 3: 80’s Steampunk Sunglasses - 3Doodler | 3Doodler · 2018. 5. 3. · the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015 Step 1: Print out the stencils, cover it with](https://reader033.vdocument.in/reader033/viewer/2022060905/60a08db6b03dca22dc2aad02/html5/thumbnails/3.jpg)
the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015
Step 1:
Print out the stencils, cover it with clear or masking tape, and start outlining the stencil.
Step 2:
When making the lens, doodle from one side of the circleto the other
Step 3:
While it’s hot, carefully use your hands to curve the lens.
Step 4:
Make another lens for the other eye. Once it’s finish, it should look something like this.
Step 5:
Next, work on the inner lens of the glasses. Use atransparent strand to connect the inner lens and the rim.
Step 6:
Then, using a PLA strand, coat it with a black FLEXY
80’s Steampunk Sunglasses
![Page 4: 80’s Steampunk Sunglasses - 3Doodler | 3Doodler · 2018. 5. 3. · the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015 Step 1: Print out the stencils, cover it with](https://reader033.vdocument.in/reader033/viewer/2022060905/60a08db6b03dca22dc2aad02/html5/thumbnails/4.jpg)
80’s Steampunk Sunglasses
the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015
Step 7:
While it is hot, carefully tighten the FLEXY using a tweezer.
Step 8:
Stick the FLEXY cylinder with the lens using PLA.
Step 9:
Insert a small PLA strand.
Step 10:
Using PLA, doodle over the strand for it to stick on the upper rim of the glasses.
Step 11:
Repeat Steps 6-10 on the other side and you should be able to open and close the lens.
Step 12:
Next, with the help of the stencils, doodle the temples of your glasses.
![Page 5: 80’s Steampunk Sunglasses - 3Doodler | 3Doodler · 2018. 5. 3. · the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015 Step 1: Print out the stencils, cover it with](https://reader033.vdocument.in/reader033/viewer/2022060905/60a08db6b03dca22dc2aad02/html5/thumbnails/5.jpg)
80’s Steampunk Sunglasses
the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015
Step 13:
Doodle the end piece on the side of the rim.
Step 14:
Wrap your unblocking tool with masking tape and doodlearound 1-2cm high. Remember to keep a few space.
Step 15:
Stick semi-cylinder on the end piece.
Step 16:
Insert a PLA strand, doodle the hinge with the temple. (Make sure you give it alittle space for it to move)
Step 17:
Adjust the end piece. Don’t forget to repeat Steps 13-17on the other side of the glasses!