Hydraulic Renovator 20

ILLUSTRATED PARTS LIST

Model #: 704591

Starting Date: 2/2005

8HP Kawasaki Engine

Handle Assembly - Fig. 134

7

19

17

9

156

58

33

3112

14

55

10

35

16

21

738

27

17

30

26

24

6

32

52

4

15

11

23

24

43

36

22

27

5

11

37

13

48

45

2557

18

33

17

54

49

51 53

8

4028

50

51

52

41

46

42

2

44

47

19

48

GD: 01001236-P16

2

Handle Assembly - Parts List For Fig. 1Ref. No. Part No. Description Qty.1 006131 Hex Nut, 3/8-16 12 010798 Cotter Pin, 1/8 x 3/4 23 011075 Flat Washer, 5/16 34 011444 Hex Cap Screw, 3/8-16 x 1 1/4 25 011437 Hex Cap Screw, 3/8-16 x 3/4 46 012118 Knob, 1-3/8 x 1-19/64, 3/8-24 17 012132 Lock Washer, 1/4 68 012133 Hex Cap Screw, 1/4-20 x 1/2 49 012149 Engine Throttle Cable 110 012156 Hex Nut, 3/8-24 211 012157 Lock Washer, 3/8 512 012158 Flat Washer, 3/8 213 012171 Hex Cap Screw, 3/8-16 x 1 214 012172 Hex Cap Screw, 3/8-16 x 2 115 012173 Lock Nut, Nylon Insert, 3/8-16 416 013131 Hex Cap Screw, 1/4-20, .75 217 014608 Lock Nut, Nylon Insert, #10-32 518 708046 Pan Head Machine Screw, 10-24 x 3/4 219 700523 Nylon Lock Nut, #10-24 420 014624 Splice Clip (not shown) 121 014630 Clevis Pin, 3/16 x 3/4 122 016771 Flat Washer, 3/16 323 017568 Clevis Pin, 3/16 x 1-1/4 124 017778 Round Head Mach. Screw, 10-32 x 1/2 525 700873 Flat Washer, .536 ID x .930 OD x .05 126 021797 Spring, .850 OD x 1 127 021956 3/8"-1/2" Hair Pin 328 030585 Module Volt Sensor 129 708057 Wire Harness (not shown) 130 032153 Clevis Pin, 5/16 x 1-5/8 131 033746 Direction Control Lever 132 033601 Shift Lever Rod 133 036730 Control Cable Adjustment Blade 134 705907 Mounting Plate Valve 135 021837 Clevis, Shift 136 030011 Lower Handle 137 708066 Handle Assembly 138 035104 Cable Anchor Assembly 139 703521 Spliced Wire (not shown) 140 708028 Snap Mounting Switch, NO 141 705453 Slicer Control Lever 142 705459 Sleeve, 1/2” ID x 5.00" Long 143 023251 Decal, “Seed Flow” ON and Off 144 701281 Decal, Forward Neutral Reverse 145 706895 Decal, Lesco 146 030598 Decal, Engage Blade 147 023252 Decal, “Slicer Clutch” ON and OFF 148 062715 Turnbuckle Sleeve 249 701717 Snap Mounting Switch, NC 150 708063 Safety Switch Bracket 151 708042 Retainer Spring 252 701864 Hex Index Washer Screw, #10-24 253 708064 Sliicer Safety Switch Bracket 154 700799 Spacer, .265 x .500 x .562 255 076730 Sleve Spring, 32/36/48 156 708203 Clevis Pin, .500 DIA. x 1.75 LG. 157 012380 Cotter Pin, 5/32 x 1-1/2 158 708098 Lower Handle Slicer Bracket 1

3

Hopper Lift Assembly - Fig. 2

23

24336

12

42

14

35

471745

27

32

46

39

16

26

2538

131

2136 11

344

10 8

108

3

13

48

18 5

44

19 7

15

41

43

30

5 2940

22

2

28

20

69

22

37

31

10

GD: 01001225-P03

4

Hopper Lift Assembly - Parts List For Fig. 2Ref. No. Part No. Description Qty.1 005530 Flat Washer, Nylon, 3/8 32 010171 Retainer Clip, “C” 13 011075 Flat Washer, 5/16 24 700523 Nylon Lock Nut, #10-24 25 012158 Flat Washer, 3/8 26 012160 Socket Shoulder Bolt, 3/8 x 12 27 012165 Nylock Nut, 5/16-18 28 012168 Lock Washer, 5/16 69 703133 Socket Screw, #10-24 x 1.25 2

10 012179 Hex Cap Screw, 5/16-18 x 3/4 811 012609 Clevis Pin, 1/4 x 3/4 112 013595 Grip, .250 x 1.0 x 4 113 013733 Shoulder Bolt, 3/8 x 3/8 514 014561 Acorn Nut, 5/16-18 215 014608 Lock Nut, Nylon Insert, #10-32 616 016044 Flat Washer, 1/4 117 016358 Cap Screw, 5/16-18 x 5/16 218 016771 Flat Washer, 3/16 619 017597 Clear Plate 120 017732 POP Rivet, 3/16 621 018628 Nylon Washer, 1/4 322 019795 E-Ring, 1/2” 423 021961 E-Ring, Retainer 124 021990 Sintered Bearing 225 030020 Spring Reel Enlargement 126 030899 Grip, 3.5” 127 030906 Machine Screw, 10-32 x 5/8 628 031742 Step, 6” Roll Safety Adhesive 129 031885 Shoulder Bolt, 3/8 x 5/8 130 060043 Knob Control Rate 131 012169 Flat washer, 5/16 132 084086 Hopper Assembly Cover 133 083661 Hopper Lift, Link 234 082743 Hopper Assembly, Lift Support 235 082300 Hopper Lift, Link, Long 136 082292 Hopper Lift, Link, Short 137 707917 Hopper Lift, Arm Assembly 238 082159 Hopper Lift, Pivot Assembly 139 021826 Hopper Dial Assembly 140 084102 Hopper Lift, Latch Assembly 141 084207 Hopper Lift, Bracket Assembly 142 083477 Hopper Lift, Handle Assembly Bearing 143 707925 Hopper Lift Assembly 144 021779 Metering Bar Assembly 145 021773 Agitator Assembly 146 701278 Decal, Seed Metering Gage 147 013736 Decal, Seed Flow Setting 148 707007 Decal, Renovator, Large 1

5

Deck Assembly Kawasaki - Fig. 3

50

14

62

65

24

28

62

8

29

34

60

1210

1

32

47

54

46

40

38

25

43

49

33

4120

31

62

6

3536

26

62 20

27

19

3616

14

43

62

1011

62

40

4155

45

2

58

22 53

42

62

43 48

21

9 4

5

7

17

30

37

59

15

49

64

7 6 51361

43

57

1856

13

39

23

31

2

6

44

66

63

This is a double pulley attached to the engine.

This pulley attaches to ref. no. 45 Disc shaft assembly

Description Part NumberEngine 701002Filter 074371

Foam Wrap 074372Fuel Filter 074373

Muffler 702951Gasket Muffler 074376

Sparkplug 050645

GD: 01004943-P07

This part is from page 8 and 9 Ref. No. 23 Sheave Pulley connected to Hydraulic Pump.

6

Deck Assembly Kawasaki - Parts List For Fig. 3Ref. No. Part No. Description Qty.

Ref. No. Part No. Description Qty.

1 011075 Flat Washer, 5/16 4 34 021813 Wheel Assy, 13-5 x 6 42 011438 Hex Cap Screw, 3/8-16 x 1-1/2 3 35 021818 Shaft Agitator 13 012062 Lock Washer, M10 1 36 021819 Brush 24 012133 Hex Cap Screw, 1/4-20 x 1/2 1 37 021822 Brush Guard 35 012152 Lock Nut, Nylon Insert, 1/4-20 1 38 030001 Heavy Duty Blade 406 012157 Lock Washer, 3/8 85 39 030014 Sprocket Drive Motor 17 012158 Flat Washer, 3/8 4 40 030020 Reel Enlargement Spring 18 012165 Nylock Nut, 5/16-18 4 41 030341 Blade Clutch with Bearings, Belle-

crank Assembly1

9 012166 Hex Nut, 5/16-18 3 42 033670 Key, 1/4 x 1/4 x 1-1/4 110 012168 Lock Washer, 5/16 16 43 034995 Flanged Ball Bearing 611 012179 Hex Cap Screw, 5/16-18 x 3/4 12 44 035603 Hex Lock Nut, 1-1/4-12 112 012382 Hex Cap Screw, 5/16-18 x 1-1/2 4 45 063635 Disc Shaft Assembly 113 013311 Decal, Rotary “Keep Hands and Feet” 1 46 064498 Disc Blade Spacer Assembly 114 013397 Groove Pin, 1/4 x 1-1/2 4 47 064591 Blade Disc Spacer 915 013675 Clutch Washer 1 48 090006 Decal, “Made In America” 116 014394 Hex Cap Screw, M8-1.25, 120.0 1 49 700165 Double Pulley, 2.65 Dia. 3.15 Dia. 117 014601 Chain, Master Link 21-1/2 1 50 700678 Jam Nut Insertion Lock, 1.0 -14 418 014602 Round Head Machine Screw, 10-32

x 3/46 51 700720 Hex Cap Screw, M8-1.25 x 25mm 2

19 014651 Nut, Keeper, #10-32 6 52 701002 8HP Kawasaki Engine (not shown) 120 014655 Sheave Pulley 1 53 012169 Flat Washer, 5/16 121 014673 Sheave Bushing 1 54 064782 Disc Blade 1022 016312 Belt Guard Support 1 55 030342 Bellecrank Pivot Tube 123 016338 Sprocket 1 56 021825 Brush Clip Assembly 224 016358 Cap Screw, 5/16-18 x 5/16 1 57 021824 Brush Mounting Shaft 225 016362 Hex Cap Screw, 3/8-24 x 1/2 80 58 016344 Belt Guard Bracket 126 016771 Flat Washer, 3/16 3 59 021834 Belt Guard Assembly 127 017732 POP, Rivet, 3/16 3 60 021770 Power Deck Assembly 128 707533 Key, 1/4 x 1/4 x 2-3/4 1 61 702885 Hex Cap Screw, M10x1.5, 30mm,

GR10.91

29 021795 Differential 1 62 703213 Flange Bearing Cover 1230 021804 Push-On Cap, 1/4 4 63 700395 Spacer, Stop Deck 131 021810 Pulley 2 64 704981 Belt Guide Rod, M8-1.25 132 021811 Power Wedge COG 26.1" OD, Pump

Belt1 65 704982 Hex Nut Center Lock, M8 2

33 021812 2 Rib Blade Belt 1 66 706895 Decal, Lesco Commercial Plus 1

7

Hydraulic Assembly - Fig. 419

5543

30

29

51

26

9

163

2154 58

32

33

13

7 23

10

11

24

10

3

57

39

2237

46

17

650 123

28

29

15

19

3160

47

5

44

19 41

4

5916

45

61

8

52

49

36

14

16

27

48

3

1

25 28

18

5656

16

33

4038219

13

1

35

4234

GD: 01001240-P10

8

Hydraulic Assembly - Parts List For Fig. 4Ref. No. Part No. Description Qty.

Ref. No. Part No. Description Qty.

1 007615 Reducer Fitting, 3/4 x 3/8 2 32 021796 Pump 12 009164 Reducer Fitting, 1/2 x 1/4 2 33 021798 Pump Mount 13 009758 Elbow Fitting 6 34 021814 Valve 14 011075 Flat Washer, 5/16 2 35 021835 Handle Valve 15 011144 Decal Oil Only, 10W30 / 10W40 1 36 021836 Hydraulic Tank Blower Hose 16 011437 Hex Cap Screw, 3/8-16 x 3/4 2 37 021956 3/8"-1/2" Hair Pin 27 011444 Hex Cap Screw, 3/8-16 x 1-1/4 2 38 030015 Hydraulic Motor 18 011453 Jam Hex Nut, 3/8-24 2 39 030017 Hydraulic Motor Hose 29 012152 Lock Nut, Nylon Insert, 1/4-20 3 40 030018 Pressure Hose 110 012157 Lock Washer, 3/8 6 41 030261 Hydraulic Oil Tank Cap 111 012158 Flat Washer, 3/8 3 42 031672 Capscrew, 1/4-20 x 1-1/2 312 012165 Nylock Nut, 5/16-18 2 43 032035 Brand Select Valve 113 012168 Lock Washer, 5/16 6 44 032036 Pressure Relief Valve 114 012171 Hex Cap Screw, 3/8-16 x 1 4 45 032060 Cylinder, 1-1/8 Bore 115 012173 Lock Nut, Nylon Insert 3/8-16 2 46 032061 Clevis Cylinder 116 012179 Hex Cap Screw, 5/16-18 x 3/4 8 47 032087 Aeroquip, Fitting 217 012191 Clevis Pin, 5/16 x 1 1 48 032119 Aeroquip, Fitting 118 012470 Cable Tie, 3/16 x .05 x 7.4 7 49 032153 Clevis Pin, 5/16 x 1-5/8 119 012474 Hydraulic Fitting 7 50 061502 Support Clamp, 3/4 220 012529 Reel Return Line Sleeve, 1.25 5 51 062715 Turnbuckle Sleeve 121 013198 Hex Cap Screw, 5/16-18 x 2 1 52 082435 Mounting Cylinder, Yoke 122 013575 Hex Cap Screw, 3/8-24 x 1-1/4 1 53 700189 Teflon Tape, 1/2" Wide 12023 014694 Sheave Pulley 1 54 700391 Flat Washer, .385 ID x .870 OD x .092 124 014717 Sheave Bushing Pulley Hub 1 55 024084 Grip 125 015971 Reducer Fitting, 3/8 x 1/4 2 56 701308 Spring Pin, 1/8 x 1-3/8 126 017565 Compressor Spring 1 57 021788 Nut Bar, Pump 127 021721 Valve To Valve Hose 1 58 030010 Valve Mounting Bracket 128 021722 Open Cylinder Hose 1 59 030602 Hydraulic Tank Assembly 129 021723 Closed Cylinder Hose 1 60 030837 Decal, Renovator 130 021724 Hose to Return Valve 1 61 707941 Jam Lock Nut, 5/16-18 131 021725 Return Hose 1

9

Over-seeder OS 820 Hydraulic Flow Diagram

MOTOR

PUMP

TANK

CYLINDER

VALVE

10

Notes

11

Equipment One-Year Limited Warranty 1. What Is Covered By This Warranty. LESCO, Inc. warrants, to the original purchaser only, that the Equipment that is the subject of

this sale (a) conforms to LESCO’s published specifications, and (b) is free from defects under normal service, for a one-year period from the original date of delivery. This warranty does not include damage to the Equipment resulting from occurrences set forth hereinafter in (2). If the purchaser discovers within this period a failure of the Equipment to conform to specifications or a defect in material or workmanship, they must promptly notify LESCO in writing of such claim. Any claims under this warranty must be received in writing by LESCO within 13 months from the date of original delivery. Within a reasonable time after such notification, LESCO will replace any defective component of the Equipment or part thereof. LESCO will provide the components or parts at LESCO’s expense. Labor is to be performed by the original purchaser. (LESCO will provide purchaser a labor allowance at LESCO’s current flat rate schedule.) LESCO will make the final determination as to the amount of hours to be reimbursed to the purchaser for labor. All defective parts shall be returned to LESCO if requested. These remedies are the original purchaser’s exclusive remedies for breach of warranty.

2. What Is Not Covered By This Warranty. LESCO does not warrant (a) any product, components or parts not manufactured by LESCO; (b) defects caused by failure to provide a suitable installation environment for the Equipment; (c) damage caused by use of the Equipment for purposes other than those for which it was designed; (d) damage caused by accident or disasters such as fire, flood, wind and lightning; (e) damage caused by unauthorized attachments or modification; or (f) any other abuse or misuse of the Equipment.

3. EXCLUSIVE WARRANTY. THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR REMEDIES, WHETHER WRITTEN, ORAL OR IMPLIED. ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXPRESSLY DISCLAIMED AND EXCLUDED.

4. LIMITATION OF REMEDIES. UNDER NO CIRCUMSTANCES, EXCEPT TO THE EXTENT prohibited BY APPLICABLE LAW, SHALL LESCO BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL ARISING OUT OF THE USE OF OR INABILITY TO USE THIS EQUIPMENT INCLUDING BUT NOT LIMITED TO ANY CLAIM FOR LOSS OF PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF USE OF THE EQUIPMENT OR ANY ASSOCIATED EQUIPMENT, FACILITIES OR SERVICE, DOWNTIME, THE CLAIMS OR COSTS OF THIRD PARTIES INCLUDING CUSTOMERS, AND INJURY TO PROPERTY. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

5. Time Limit For Claims. Any claim for breach of warranty or claims under this warranty must be received by LESCO within 25 months following delivery of the equipment.

6. No Other Warranties. Unless modified in writing signed by both parties, this agreement is understood to be the complete and exclusive agreement between the parties, superceding all prior agreements, oral or written, and all other communications between the parties relating to the subject matter of this agreement. No employee or representative of LESCO or any other party is authorized to make any other Warranty or to assume any other liability in connection with the sale of its Equipment.

7. Future Changes. LESCO reserves the right to reserve, change or modify the construction and design of its Equipment or any component part or parts thereof without incurring the obligations to make such changes or modifications in present equipment.

8. Allocation Of Risks. This agreement allocates the risks of equipment failure between LESCO and the original purchaser. This allocation is recognized by both parties and is reflected in the price of the goods. THE PURCHASER ACKNOWLEDGES THAT IT HAS READ THIS AGREEMENT, UNDERSTANDS IT, AND IS BOUND BY ITS TERMS.

9. How To Contact LESCO. If during the warranty period, the LESCO equipment does not function properly due to defect, simply contact the LESCO Service Department:

LESCO, Inc. (216) 706-9250 ClevelandTechnical Service Department (800) 321-5325 Toll Free1301 East 9th Street Suite 1300Cleveland, OH 44114-1849

HOW TO ORDER PARTSContact your LESCO Salesperson, OR phone us (use the number below),OR write us. (use the address below.)We will need the following information: 1. Your account number if available. 2. Your name and address and the address where you want the parts to be shipped. 3. The Model/Serial No. of the equipment. 4. The LESCO Part No. and the quantity desired. (Please do not use reference numbers.)(NOTE: Inspect all shipments on receipt for damage or missing parts.File a claim with the carrier before accepting a damaged shipment.)We reserve the right to change designs, specifications and equipment at any time without notice and without incurring any obligations.

LESCO, Inc., 1301 East 9th Street Suite 1300, Cleveland, Ohio 44114-1849Toll Free (800) 321-5325 • In the Cleveland Area (216) 706-9250Form No. 706239 Rev 05-0AA 2/24/2005 © Copyright 2005 - LESCO, Inc. LESCO is a registered trademark of LESCO Technologies, LLC