9631u-g-jsd-1300-0021-3

Project n° Unit Doc Type Material code Serial n° Rev Page.. IKRA PROJECT 9631U- G JSD 1300 0021 3 1/18

NIJNI NOVGOROD INTEGRATED VINYLS PLANT

PIPING CLASSES SUMMARY

Pages modified under this revision: (All changes are identified in red colour)

3 31-Aug-11 Issue for Design S.PARIENTE P.RAULET A. ZUELGARAY

2 20-Jan-11 Issue for Design G.LEFEVRE P.RAULET A.TESTA

1 10-Nov-10 Issue for Design S.PARIENTE T. DE TAILLAC A.TESTA

0 15-Oct-2010 Issue for Design S.PARIENTE G.LEFEVRE A.TESTA

E 21-Jan-2010 Re-Issue for Review O. MOLIERE W.ROMANSKI P. HALLE

D 11-DEC-08 Re-Issue for Review N.GATTA P.RAULET M.CHARLIER

C 30-SEP-08 Re-Issue for Review N. GATTA P. RAULET M. CHARLIER

B 27-MAY-08 Re-Issue for Review P.LACHEVRE N.GATTA M.CHARLIER

A 18-MAR-08 Issue for Review P.LACHEVRE N.GATTA P.RAULET

Rev Date DD-MMM-YY

STATUS WRITTEN BY (name & visa)

CHECKED BY (name & visa)

APPROVED BY (name & visa)

DOCUMENT REVISIONS

Sections changed in last revision are identified by a vertical line in the margin

All information embodied in this document is proprietary to SOLVAY S.A. or TECHNIP and is subject to confidentiality, non disclosure and restricted use obligations

JSD 1 - ANG - rev. 2

JOB SPECIFICATION FOR DESIGN


Project n° Unit Doc Type Material code Serial n° Rev Page.. IKRA PROJECT 9631U- G JSD 1300 0021 3 2/18

NIJNI NOVGOROD INTEGRATED VINYLS PLANT


JSD 1 - ANG - rev. 2

General Notes:

- This document is in accordance with fluid list 9631U-G-NM-0002-0001 Rev F dated 23-02-2011.

- This document is based on piping class given by Licensor.

Points on HOLD still to de clarified:

None

3/18

Doc. Type Code Serial N° Rev.

9631U-G JSD 1300 0021 3

page

GASKET P T

BOLTING (barg) (°C) Type (DN)

2500 # STAINLESS STEEL 320 -41.5 / 38 GATE 100RTJ (SS 304L) 320 60 GLOBE

OCTAGONAL C.A. = 1 mm - HP DEMI WATER PVC-E WHP HP 100B8-Gr.8

1500 # STAINLESS STEEL 150 -41.5 / 38 GATE 100RTJ (SS 304L) 150 60 GLOBE

OCTAGONAL C.A. = 1 mm - HP DEMI WATER PVC-S WDHP HP 100B8-Gr.8

150 # STAINLESS STEEL 15,9 -41.5 / 38 BALL 100RF (SS 316L) 14.5 70 BUTTERFLY

LD Spiral wound PTFE/316/int. Ring C.A. = 0,5 mm - Al2(SO4)3 G X1 Ab-II GLOBE 100B7 - 2H Hot Galvanized - Al2(SO4)3 SOLUTION G X1S Ab-II DIAPHRAGM 100

- NaHSO3 G BS20 Ab-II PLUG 100

1,5 -60150 # STAINLESS STEEL 15,9 -41.5 / 38 GLOBE 200

RF (SS 304L) 14.1 80 PLUGCorrugated /Graphite/int. Ring C.A. = 1,0 mm G SPS Ab-II 200

B8-Gr.8 VN0 CLHG Aa-I 50 3

150 # STAINLESS STEEL 15,9 -46/38 GATE 100RF (SS 304L) 13.3 100 GLOBE

LD Spiral wound Graphite/316/int. Ring C.A. = 0 mm - CHLORINATION LIQUID EDC LOW TEMP. V ELCL Aa-I 100B7 - 2H Hot Galvanized - LUBE OIL FILTERED LOW PRESSURE V/G OIFL Ab-I 100

150 # STAINLESS STEEL 15,9 -41.5 / 38 BALL 250RF (SS 304L) FV / 13.3 100 BUTTERFLY

LD Spiral wound Graphite/316/int. Ring C.A. = 0,5 mm - ANTI-FOAM LP PVC-E/S AFML Bv-III GATE 80B8-Gr.8 - EMULSIFIER LP PVC-E EMLL Ab-II GLOBE 80

- REAGENT 2 PVC-E RG2 Ab-II 80- REACTIVE MASTER BATCH LP PVC-E RMBL V-V 50- REAGENT 1 LP PVC-E RG1L V-V 80- INHIBITOR LP PVC-E INHL Ab-II 50- LATEX LP PVC-E LXL Ab-II 250- PEBBLES HP PVC-E PEBH Aa-I 100- Na2C03 10% (Carbonate de sodium) PVC-E SA1E Ab-II 25- EXHAUST AIR LATEX PVC-E AEXL Aa-I 150

ABOVE GROUND

ABOVE GROUND

2720

- DRY GASEOUS CIH LOW TEMP.

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

Dia.max

Unit

SERVICE BLOCK VALVEPipingcat. &

group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-

82(5)(**)CORROSION ALLOWANCE

2021

2721

2723

CLA

SS

MATERIAL

- STRIPPED PEBBLES SLUDGE

2724

IKRA PROJECTNIJNI NOVGOROD INTEGRATED VINYLS PLANT

ABOVE GROUND

DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

2020

Project N° - Unit

4/18


9631U-G JSD 1300 0021 3

page

GASKET P T


Dia.max

Unit


group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-

82(5)(**)CORROSION ALLOWANCEC

LASS

MATERIAL


DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

Project N° - Unit

150 # STAINLESS STEEL 15,9 -41.5 / 38 GATE 300RF (SS 304L) 11.8 160 GLOBE

Tanged Graphite C.A. = 0.5 mm - HOMOGENIZED MIXTURE JACKET PVC-E HMJ V-V 300B8-Gr.8

15,9 -41.5 / 38150 # STAINLESS STEEL 11.3 190 BALL 400

RF (SS 316L) FV 190 GLOBE LD Spiral wound Graphite/316/int. Ring C.A. = 0 mm - LP INITIATOR PVC-S X17L Aa-I PLUG Full Bore 100

B8-Gr.8 - ALKALINE PURE CONDENSATE M CDAP Aa-I (on SYLP, VCG2 & SYMP) 100(LOW EMISSION) - LP ANTIOXIDANT PVC-S AX4 Ab-II 50

- LP POTASSIUM IODIDE PVC-S KI4 Ab-II 50- LP PVC SLURRY PVC-S SYLP Ab-I 150- VCM GAS 10 BAR PVC-S VCG2 Aa-I 200- MP PVC SLURRY PVC-S SYMP Aa-I 150- FLOCULENT AGENT SOLUTION W X9S V-V 80- BIOCIDE PVC-U BIOC Ab-II 80

15,9 -41.5 / 38150 # STAINLESS STEEL 11.8 160 BALL 350

RF (SS 304L) FV 160 BUTTERFLY LD Spiral wound Graphite/316/int. Ring C.A. = 0 mm - NaOH 23% COOLED (*) G SC3C Aa-I GATE 150

B7 - 2H Hot Galvanized - NaOH 50% HOT (*) M SC5H Aa-I GLOBE 150- NaOH 50% COOLED (*) G SC5C Aa-I 350- NaOH 20% (*) M SC2C Aa-I 150- ABSORBENT AGENT LG PVC-S AB1 Aa-I 150

150 # STAINLESS STEEL 15,9 -41.5 / 38 GLOBE 200RF (SS 304L) 14.1/FV* 80 PLUG

LD Spiral wound PTFE/316/int. Ring C.A. = 0,5mm - HOMOGENISED MIXTURE LP PVC-E HMGL Aa-I 200B8-Gr.8

(LOW EMISSION)

150 # STAINLESS STEEL 15,9 -41.5 / 38 BALL 800RF (SS 304L) 12 150 BUTTERFLY

LD Spiral wound Graphite/316/int. Ring C.A. = 0 mm - ANTI-FOAM W ATF Ab-II GATE 80B7 - 2H Hot Galvanized - FLOCULENT AGENT W X9 V-V GLOBE 80

- NaCl PVC-S NACL Ab-II PLUG 80- CHLORINATION GASEOUS EDC HIGH TEMP. V EGCH Aa-I 800- CHLORINATION LIQUID EDC HIGH TEMP. V ELCH Aa-I 400- ETHYLENE-GLYCOL DRYING RETURN E GLDR Ab-II 80- ETHYLENE-GLYCOL DRYING SUPPLY E GLDS Ab-II 80

(*) - protective shield on all flanges

ABOVE GROUND

ABOVE GROUND

2730

ABOVE GROUND

2726

2725

ABOVE GROUND

2728

ABOVE GROUND

2727

5/18


9631U-G JSD 1300 0021 3

page

GASKET P T


Dia.max

Unit


group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-


LASS

MATERIAL


DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

Project N° - Unit

150 # STAINLESS STEEL 15,9 -41.5 / 38 BALL (reduce bore) (note 4) 150RF (SS 316L) 12 150 GATE

LD Spiral wound PTFE/316/int. Ring C.A. = 0 mm - H2O2 30% G HP30 Aa-I GLOBE 100B8-Gr.8 - H2O2 ( as 35%) PVC-S HP35 Aa-I 50

- LP POLYVINYLIC ALCOHOL PVC-S PV4 Ab-II 150- LP AMMONIUM HYDROXYDE PVC-S AH4 Bb-III 50

150 # STAINLESS STEEL FV*/15.9 -41.5 / 38 GATE 400RF (SS 316L) 10.5 250 GLOBE

Tanged Graphite C.A. = 0 mm - STEAM LP FILTERED PVC-S STLF IV 400B8-Gr.8 - LP STEAM CONDENSATE FILTERED PVC-S CDLF IV 200

150 # STAINLESS STEEL -0,5/6 -41.5/80 GATE 600RF (SS 304L) 6 120 BUTTERFLY

White Neoprene C.A. = 0,5 mm GLOBEB8-Gr.8 - PEBBLES LP PVC-E PEBL Aa-I 200

- E-PVC PNEUMATIC TRANSPORT PVC-E PVCP Ab-I 600- PVCS PNEUMATIC TRANSPORT PVC-S PVCS Ab-II 250- E-PVC GRAVITARY MOTION PVC-E PVCG Ab-ii 300

150 # STAINLESS STEEL 15,9 -41.5 / 38 BALL 400RF (SS 316L) 14.9 60 BUTTERFLY

PTFE C.A. = 0,5 mm 10 150 GLOBE 100B7 - 2H Hot Galvanized - FLOCULENT AGENT G X2 V-V DIAPHRAGM 100

- SODIUM THIOSULFATE PVC-S STHS V-V 400- DEMINERALIZED WATER G WD V-V 100- FLOCULENT AGENT SOLUTION G X2S V-V

150 # STAINLESS STEEL 15,9 -41.5 / 38 400RF (SS 316L) FV*/12.8 120 BALL

LD Spiral wound Graphite/316/int. Ring C.A. = 0 mm - FILTERED MOTHER WATER PVC-S WM V-I GATE 150B8-Gr.8 - HOT MOTHER WATER PVC-S WMH V-V GLOBE 250

- MOTHER WATER PVC-S WM1 V-V 150- DIOCTYL ADIPATE PVC-S DOA Bv-IV 50- ANTIFOULING 2 AGENT PVC-S AF4 V-V 50

ABOVE GROUND

ptransport (all fluids) except fluids AD &

PTAElbow R=5xD for pneumatic transport

(PVCS & PVCE fluids)

2731

2733

2732

2734

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

2735

ABOVE GROUND

6/18


9631U-G JSD 1300 0021 3

page

GASKET P T


Dia.max

Unit


group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-


LASS

MATERIAL


DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

Project N° - Unit

150 # STAINLESS STEEL 15,9 -41.5 / 38 150RF (SS 304L) FV*/14.9 60 BALL

LD Spiral wound Graphite/316/int. Ring C.A. = 0 mm 13.3 100 BUTTERFLYB7 - 2H Hot Galvanized - ATMOSPHERIC AIR PVC-S AA V-II GATE 150

- FILTERED INSTRUMENT AIR PVC-S AIF V-V GLOBE 150- CHILLED DEMI WATER ISU SUPPLY PVC-S WDIR V-V 100- CHILLED DEMI WATER ISU RETURN PVC-S WDIS V-V 100- FILTERED NITROGEN 10 BAR PVC-S N10F V-I 50- FILTERED PLANT AIR PVC-E APF V-V 25- LOW TEMPERATURE NITROGEN G N10C V-V 150

150 # STAINLESS STEEL 15,9 -41.5 / 38 BALL (reduce bore) 500RF (SS 316L) 14.9 60 GATE

PTFE C.A. = 0 mm - LP DEMI WATER PVC-S WDLP V-V GLOBE 500B8-Gr.8

150 # STAINLESS STEEL -0,8/6 -41.5/80 GATERF (SS 304L) 3.5 220 BUTTERFLY 1200

White Neoprene C.A. = 0,5 mm - DRYER AIR PVC-S AD V-II 1200B8-Gr.8 - PNEUMATIC TRANSPORT AIR PVC-S PTA V-V 300

300 # STAINLESS STEEL 28 -46/100 BALL 250RF (SS 304L) FV* 100 PLUG Full Bore

Spiral wound Graphite/316/int. Ring C.A. = 0,5 mm - ANTI-FOAM HP PVC-E AFMH Bv-II GATE 80B8-Gr.8 - EMULSIFIER HP PVC-E EMLH Ab-II 80

- REAGENT 1 HP PVC-E RG1H V-IV 80- REACTIVE MASTER BATCH HP PVC-E RMBH V-IV 50- INHIBITOR HP PVC-E INHH Ab-II 50- LATEX HP PVC-E LXH Ab-I 250- LUBE OIL FILTERED HIGH PRESSURE V/G OIFH Ab-I 100

300 # STAINLESS STEEL 29 -41.5/195 GATE 400RF (SS 316L) FV* / 16.1 250 GLOBE

Spiral wound Graphite/316/int. Ring C.A. = 0 mm - HOT WATER PVC-S WH III.2 200B8-Gr.8 - FILTERED MP STEAM PVC-E/S STMF IV 400

- MP STEAM CONDENSATE FILTERED PVC-S CDMF IV 150

300 # STAINLESS STEEL 30 -41.5/60 PLUG 400RF (SS 316L) FV*/16.1 250 GLOBE

Spiral wound Graphite/316/int. Ring C.A. = 0 mm - FILTERED LIQUID VCM PVC-S VCMF Aa-I (bellows sealed) 250B8-Gr.8 - HP ANTIOXIDANT PVC-S AX16 Ab-I BALL 50

(LOW EMISSION) - HP POTASSIUM IODIDE PVC-S KI16 Ab-I 50- VCM GAS 17 BAR PVC-S VCG3 Aa-I 400- MP INITIATOR PVC-S X17M Aa-I 100

PVC-S SYHP Ab-II 250

(don't use for VCMF and X17M)

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

- HP PVC SLURRY

2822

2738

2821

2737

2739

2823

ABOVE GROUND

7/18


9631U-G JSD 1300 0021 3

page

GASKET P T


Dia.max

Unit


group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-


LASS

MATERIAL


DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

Project N° - Unit

300 # STAINLESS STEEL GLOBE 150RF (SS 304L) 15 -41.5 / 240

Spiral wound Graph.(O2) /316 /int. Ring C.A. = 0 mm - OXYGEN STAINLESS STEEL V OSS V-IV 150B7 - 2H Hot Galvanized

300 # STAINLESS STEEL 16 -41.5 / 600 GATE 400RF (SS 321H) 4 700

Spiral wound Mica /Graphite/321 /int. Ring C.A. = 3 mm - AIR + STEAM + COKE (DECOKING) V DCO Aa-I 400B408 UNS N08811 - ORGANIC VAPOUR OUTLET FURNACE V VOF Aa-I 400

300 # STAINLESS STEEL 20 -41.5 / 210 GATE 450RF (SS X1NiCrMoCu25-20-5) 15 275 GLOBE

Spiral wound Graphite/321/int. Ring C.A. = 1,5 mm 12,8 500 (6)B408 UNS N08811 - CRACKING QUENCH LIQUID V LOQL Aa-I 150

- ORGANIC VAPOUR CRACKING QUENCH V VOH Aa-I 400- OXYFLUSHING V FOX Aa-I 450

300 # STAINLESS STEEL 25 -41.5 / 38 PLUG Full Bore 150RF (SS 304L) FV*/ 25 80 GLOBE

Spiral wound Graphite/316/int. Ring C.A. = 1,0 mm - HOMOGENISED MIXTURE HP PVC-E HMGH Aa-I 150B8-Gr.8

(LOW EMISSION)

300 # STAINLESS STEEL 41,4 -41.5 / 38 GATE 250RF (SS 316L) 39 60 GLOBE

Spiral wound Graphite/316/int. Ring C.A. = 0 mm - AMMONIUM HYDROXYDE PVC-S AH20 Bb-II PLUG 50B8-Gr.8 - MP DEMI WATER PVC-S/G WDMP V-III 200

- CHILLED DEMI WATER ISU HUGH PRESSURE PVC-S WDIH V-III 150

300 # STAINLESS STEEL 41,4 -41.5 / 38 BALL 80RF (SS 304L) 39 60 GATE

Aramide fibre +NBR C.A. = 0 mm - NITROGEN 20 BARS FILTERED PVC-S N20 V-IV GLOBE 80B8-Gr.8 - NITROGEN 14 BARS PVC-E N14 V-IV 80

300 # STAINLESS STEEL GATE 150RF (SS 304L) 16/FV* -41.5 / 190 GLOBE

Spiral wound Graphite/316/int. Ring C.A. = 0 mm - ABSORBENT AGENT PVC-S AB2 Bv-I 150B8-Gr.8

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

2828

2829

2830

2824

2826

2825

2827

8/18


9631U-G JSD 1300 0021 3

page

GASKET P T


Dia.max

Unit


group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-


LASS

MATERIAL


DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

Project N° - Unit

300 # STAINLESS STEEL 41,4 -41.5 / 38 GLOBE 100RF (SS 316L) 39 60 PLUG

Corrugated /Graphite/int. Ring C.A. = 0 mm - HP POLYVINYLIC ALCOHOL PVC-S PV16 Ab-I 100B8-Gr.8

150 # 3.5 Ni 19.6 -85/38 GATE 100RF C.A. = 1,5 mm 18.9 60 (Extended Bonnet)

LD Spiral wound Graphite/Inox/int. Ring - DRY GASEOUS ClH TO DESTRUCTION V CLHD Aa-I GLOBE - bellows Hastelloy 100L7-Gr.4 + S3 Eurochlore Design

150 # LOW TEMPERATURE 19,6 -46/38 GATE 300RF CARBON STEEL 17.7 100 GLOBE

LD Spiral wound Graphite/316/int. Ring C.A. = 1,5 mm - DRY GASEOUS ClH TO FLARE V CLHF Aa-I 250- DRY LIQUID EDC LOW TEMP. (E) V ELLD Aa-I 100- DRY GASEOUS CIH LOW TEMP. V CLHG Aa-I 300- LUBE OIL UNFILTERED LOW PRESSURE V/G OIUL Ab-I 100

19,6 -45.5/38150 # LOW TEMPERATURE 18.3 80 PLUG 500

RF CARBON STEEL FV/16.9 60/120 GLOBE LD Spiral wound Graphite/316/int. Ring C.A. = 3 mm 13.8 200 (bellows sealed)

- GASEOUS VCM V VCMG Aa-I BUTTERFLY 500- CHLORINATION VENT GAS V VGC Aa-I 250

(LOW EMISSION) - LIQUID VCM G VCM Aa-I 500

150 # LOW TEMPERATURE 19,6 -41.5/38 BALL (reduce bore)RF CARBON STEEL 18.9 60 BUTTERFLY

Aramide fibre +NBR C.A. = 1,5 mm 17.7 100 GATE- INSTRUMENT AIR G AI V-V GLOBE 200- PLANT AIR G AP V-V PLUG 200- NITROGEN 3 BAR V N3 V-V 150- NITROGEN 10 BAR G N10 V-V 150- BLOWN AIR FOR SAND FILTER U ABF V-V 400- WET PLANT AIR U APW V-V 200

150 # STAINLESS STEEL 19,6 -41.5/38 BALLRF (SS 304L) -0,1/19.6 80 BUTTERFLY

EPDM LTCS LJ Flange - SPRINKLERS SYSTEM G WFS V-IV GATE 300C.A. = 0,0 mm - POTABLE WATER G WP V-V GLOBE 100

- EXHAUST AIR PVC-E AEX V-V 600

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

L7-Gr.4 + S3 Zinc plated / Bichromate treated

ABOVE GROUND

2831


3723


600

400

3727

3721

3720

ABOVE GROUND


ABOVE GROUND

3728

9/18


9631U-G JSD 1300 0021 3

page

GASKET P T


Dia.max

Unit


group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-


LASS

MATERIAL


DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

Project N° - Unit

150 # LOW TEMPERATURE 19,6 -41.5 / 38 GLOBE 200RF CARBON STEEL 18.9 60 (GABLER TYPE)

LD Spiral wound PTFE/316/int. Ring C.A. = 1,5 mm - OXYGEN CARBON STEEL G OCS V-IV 200

150 # LOW TEMPERATURE 9 -41.5 GLOBE 600RF CARBON STEEL FV*/9 120 Eurochlore Design

LD Spiral wound PTFE/316/int. Ring C.A. = 1,5 mm - Cl2 GASEOUS DRY HIGH PRESSURE M/V CLDH Aa-I BUTTERFLY 300- CL2 GASEOUS DRY LOW PRESSURE M CLDL Aa-I PLUG 600

150 # LOW TEMPERATURE 19,6 -41.5 / 38 PLUG 400RF CARBON STEEL FV/15.8 150 GLOBE

LD Spiral wound Graphite/316/int. Ring C.A. = 1,0 mm - PROCESS VACUUM PVC-S VACF Aa-I BALL 200- INITIAL VACUUM PVC-S VACI Aa-I 200- CONTAMINATED WATER PVC-S CVC Aa-I 100

(LOW EMISSION) - NATURAL DEGASSING PVC-S VCG1 Aa-I 400

8 -41.5/38150 # LOW TEMPERATURE -0,15/8 100 GATE 500

RF CARBON STEEL 8 250 BUTTERFLY LD Spiral wound Graphite/316/int. Ring C.A. = 1,0 mm - VENT TO ATMOSPHERE PVC UNIT PVC-S ATMP Aa-I GLOBE 500

- ALKALINE HYDROGENATED CONDENSATE M CDAH Ba-II BALL 80

150 # LOW TEMPERATURE 19,6 -41.5/38 GLOBE 500RF CARBON STEEL 12.1/FV* 250 PLUG

LD Spiral wound Graphite/316/int. Ring C.A. = 3,0 mm - VENT DISCHARGE TO ATMOSPHERE V ATMV Aa-I GATE 500BALL

150 # LOW TEMPERATURE 19,6 -41.5/38 GLOBE 200RF CARBON STEEL 14.6 180 GATE

Aramide fibre +NBR C.A. = 3,0 mm - BOILER BLOW DOWN PURGE G BBDP IV 150- PROCESS WATER (X) V WX IV 200

150 # LOW TEMPERATURE 19,6 -41.5/38 GATE 80RF CARBON STEEL 19.2 50 GLOBE

PTFE C.A. = 3,0 mm - AMMONIA W SNH V-V 80L7-Gr.4 + S3

150 # LOW TEMPERATURE 19,6 -41.5/38 BALL 100RF CARBON STEEL 17.7 100 BUTTERFLY

Tanged Graphite C.A. = 1,5 mm - CaCl2 HOT M FCH Ab-II GLOBE 100PLUG L7-Gr.4 + S3 Zinc plated / Bichromate

treated


ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

3730

3731

ABOVE GROUND

ABOVE GROUND




3737


3732

ABOVE GROUND


3729

3735

ABOVE GROUND

3734

3738

10/18


9631U-G JSD 1300 0021 3

page

GASKET P T


Dia.max

Unit


group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-


LASS

MATERIAL


DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

Project N° - Unit

150 # LOW TEMPERATURE 19,6 -41.5/38 BALL 800RF CARBON STEEL 17.7 100 BUTTERFLY

Aramide fibre +NBR C.A. = 3,0 mm - FIRE WATER G WF V-IV GLOBE 700- DIGESTER BLOWN AIR W DBA V-V GATE 400- SANITARY WATER U WSY V-V 800

150 # LOW TEMPERATURE FV / 19.6 -41.5/38 GATE 500RF CARBON STEEL 12.1 250 GLOBE

LD Spiral wound Graphite/316/int. Ring C.A. = 1,5 mm - STEAM LP 2,5barg G STLP IV BUTTERFLY 500- LOW PRESSURE STEAM CONDENSATE G CDLP IV (only for CDLP service) 300- RAW WATER HEATED U WRH IV 500- ATMOSPHERIC STEAM CONDENSATE V CDAT IV 50- WASTE WATER PVC G WWP V-I 200- HOT NITROGEN V NH V-IV 100- WATER BUILDING HEATING SUPPLY U WBHS IV (*) 200- WATER BUILDING HEATING RETURN U WBHR IV (*) 200

150 # LOW TEMPERATURE 10 -41.5/38 BALL 1600RF CARBON STEEL 10 60 BUTTERFLY

Aramide fibre +NBR C.A. = 1,5 mm 8 80 GLOBEExt. PE coated - COOLING WATER RETURN (UNDERGROUND) G WCRU V-V GATE 1600

- COOLING WATER SUPPLY (UNDERGROUND) G WCSU V-V 1200- RAW WATER UNDERGROUND G WRU V-V 400- TREATED WATER U WWTU V-V 400- WASTE WATER UTILITY (Underground) U WWGU V-V 150

150 # LOW TEMPERATURE 10 -41.5 / 38 BALL 1700RF CARBON STEEL BUTTERFLY

LD Spiral wound Graphite/316/int. Ring C.A. = 1,5 mm 10 / FV 100 GLOBEG WCR V-I PLUG 1600

- COOLING WATER SUPPLY G WCS V-I GATE 1700- CHILLED WATER RETURN M WCHR V-V 200- CHILLED WATER SUPPLY M WCHS V-V 200- RAW WATER ABOVEGROUND G WR V-V 400- COOLING WATER PURGE G WCP V-V 200- WASTE WATER UTILITY G WWG V-V 100- TREATED WASTE WATER W WWT V-V 400





- COOLING WATER RETURN

ABOVE GROUND

ABOVE GROUND

UNDERGROUND

3739

3741

3740

3742

ABOVE GROUND

11/18


9631U-G JSD 1300 0021 3

page

GASKET P T


Dia.max

Unit


group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-


LASS

MATERIAL


DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

Project N° - Unit

19,6 -46 / 38150 # LOW TEMPERATURE FV/12.1 155/210 BALL 900

RF CARBON STEEL 0.5 530 (note 3) GATELD Spiral wound Graphite/316/int. Ring C.A. = 3 mm - NaOH 23% (or < 20%) (*) V SC2V Aa-I GLOBE 200

- ORGANIC VAPOUR (E) V VOE Aa-I PLUG 800- DRY LIQUID EDC (C,X,E) V ELD Aa-I 800- DRY GASEOUS EDC (E) V EGED Aa-I 800- RECYCLED EDC V ELR Aa-I 600- DRY ORGANIC LIQUID (E) V LOE Aa-I 200

See note 3 - HOT VENT GAS TO FLARE OR INCINERATION V VGH Aa-I 900- MOIST GASEOUS EDC (X) V EGX Aa-I 400- MOIST LIQUID EDC (X) V ELX Aa-I 300- FLARE CONDENSATE V LOF Aa-I 100- CHEMICAL SEWER V LOSW Aa-I 100- DRY ORGANIC VENT GAS V VGD Aa-I 250- MOIST ORGANIC VENT GAS (X) V VGX Aa-I 250- FLARE VENT G FL Aa-I 400- DILUTED NaOH V SC0C Aa-I 150- DRAIN V LOD Aa-I 150- COMMON WASTE WATER W WWC V-V 400

150 # LOW TEMPERATURE 19,6 -41.5 / 38 BALL 150RF CARBON STEEL 19.2 50 BUTTERFLY

Aramide fibre +NBR C.A. = 3,0 mm - SLUDGES SOLUTION - PCT PVCS W SLSW Ab-II GLOBE 150- BIOTREATMENT SLUDGE W SLB V-V 150

150 # LOW TEMPERATURE 19,6 -41.5 / 38 BALL 300RF CARBON STEEL 17.7 100

Tanged Graphite C.A. = 3 mm - UNDERGROUND NG G NGU Ba-II 300Ext. PE coated

150 # LOW TEMPERATURE 19,6 -41.5 / 38 GATE 600RF CARBON STEEL 18.9 60 GLOBE

Aramide fibre +NBR C.A. = 1,5 mm - FIRE WATER UNDERGROUND G WFU V-IV BUTTERFLY 600Ext. PE coated

150 # LOW TEMPERATURE 19,6 -41.5 / 38 GATE 250RF CARBON STEEL - 0,6 / 18.3 80 BUTTERFLY

LD Spiral wound PTFE/316/int. Ring C.A. = 1,0 mm - AIR DRYER VACUUM PVC-S VAD Ab-I 250

150 # LOW TEMPERATURE 19,6 -41.5 / 38 BALL (reduce bore)RF CARBON STEEL 18.9 60 BUTTERFLY

Aramide fibre +NBR C.A. = 1,5 mm - ETHYLENE-GLYCOL AQUEOUS SOL. SUPPLY PVC-S GLYS Ab-II GATE 200- ETHYLENE-GLYCOL AQUEOUS SOL. RETURN PVC-S GLYR Ab-II GLOBE 150






ABOVE GROUND

UNDERGROUND

ABOVE GROUND

ABOVE GROUND

3748 ABOVE GROUND

UNDERGROUND

3745

3747

3744



200

3746

3743

12/18


9631U-G JSD 1300 0021 3

page

GASKET P T


Dia.max

Unit


group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-


LASS

MATERIAL


DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

Project N° - Unit

150 # LOW TEMPERATURE 19,6 -41.5 / 38 GLOBE 300RF CARBON STEEL 17.7 100 GATE

Corrugated /Graphite/int. Ring C.A. = 3,0 mm - NATURAL GAS G NG Ba-II BALL 300

150 # LOW TEMPERATURE 19,6 -41.5 / 38 BALLRF CARBON STEEL 18.9 60 BUTTERFLY

LD Spiral wound PTFE/316/int. Ring C.A. = 1,5 mm - DIESEL OIL G FOD Bb-III GATE 200GLOBE

150 # LOW TEMPERATURE 19,6 -30/38 GATE 100RF CARBON STEEL 18.3 80 GLOBE

Corrugated /Graphite/int. Ring C.A. = 1,5 mm - LOW PRESSURE ETHYLENE V ETLP Ba-II 100L7-Gr.4 + S3

150 # LOW TEMPERATURE GATE 500RF CARBON STEEL FV*/6 -41.5 / 160 BUTTERFLY

Tanged Graphite C.A. = 1,0 mm - H2 ELECTROLYSIS 40°C M H240 Ba-II GLOBE 500- HYDROGEN MEDIUM PRESSURE M H2MP Ba-II BALL 300

150 # LOW TEMPERATURE 8 -41.5 / 38 GATE 700RF CARBON STEEL 8 100 BALL

Graphite PE COATED EXTERNAL - POTENTIALLY CONTAMINATED WATER CIVIL NETWORK G POC V-V BUTTERFLY 200C.A. = 3,0 mm - COMMON WASTE WATER (Underground) U WWCU V-V GLOBE 700

- WASTE WATER PVC-S (Underground) S WWPU V-V 700

300 # 3.5 Ni 51.1 -85/38 200RF C.A. = 1,5 mm FV*/46.6 100

Spiral wound Graphite/316/int. Ring - DRY LIQUID ClH V CLHL Aa-I GLOBE 200(bellows Hastelloy)Eurochlore Design

300 # LOW TEMPERATURE FV*/25 -46/100 GATE 750RF CARBON STEEL GLOBE

Spiral wound PTFE/316/int. Ring C.A. = 1,5 mm - COLD FRIGO FLUID V FRC V-I BUTTERFLY 750

300 # LOW TEMPERATURE FV*/51.1 -41.5 / 38 450RF CARBON STEEL 38.5 330 GATE

Spiral wound Graphite/316/int. Ring C.A. = 3 mm - INTERNAL FEED WATER FOR V UNIT V WFEV III.2 GLOBE 150- STEAM HP 30barg G STHP III.1 450- HP STEAM CONDENSATE FROM X V CDX III.1 400- HIGH PRESSURE STEAM FROM X V STX III.2 (*) 450- HP STEAM CONDENSATE G CDHP II.2 (*) 300








ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

UNDERGROUND

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

200

3749

3820

3753

3752

3750

3821

3751

3824

13/18


9631U-G JSD 1300 0021 3

page

GASKET P T


Dia.max

Unit


group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-


LASS

MATERIAL


DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

Project N° - Unit

300 # LOW TEMPERATURE RF CARBON STEEL 28 -46 / 100 150

Spiral wound Graphite/316/int. Ring C.A. = 3 mm FV* 60 GLOBE- HIGH PRESSURE VCM V VCMH Aa-I PLUG 150

(LOW EMISSION, FIRE SAFE)

300 # LOW TEMPERATURE 36 -46 / 185 PLUG 750RF CARBON STEEL 30 250 GATE

Spiral wound Graphite/316/int. Ring C.A. = 3 mm 14,1 275 GLOBEFV* 250

- DRY GASEOUS EDC FURNACE INLET V EGPD Aa-I 600- HOT GASEOUS EDC FROM OXY REACTOR V EGXH Aa-I 600- LIQUID EDC TO CRACKING V ELP Aa-I 600- RECYCLED GAS (X) V GR Aa-I 450- ORGANIC LIQUID EDC+VCM+HCL COND. (P) V LOP Aa-I 300- ORGANIC VAP. DOWNS. CRACKING QUENCH V VOP Aa-I 500- GASEOUS HOT ClH OXY V CLHX Aa-I 300- SLUDGES ex PVCS (PRESS FILTER FEED) W SLS Ab-II 150- SLUDGES ex VCM (PRESS FILTER FEED) W SLV Ab-II 150- ORGANIC VAPOUR RD OXY REACTOR V VOX Aa-I 600- LUBE OIL UNFILTERED HIGH PRESSURE V/G OIUH Ab-I 100

300 # LOW TEMPERATURE 25 -46/180 GATE 300RF CARBON STEEL FV* -46/50 GLOBE

Spiral wound PTFE/316/int. Ring C.A. = 1,5 mm - HOT FRIGO FLUID V FRH V-III 300

51,1 -41.5 / 38300 # LOW TEMPERATURE 39.1 315 GATE 600

RF CARBON STEEL FV* -41.5 / 315 GLOBESpiral wound Graphite/316/int. Ring C.A. = 1,5 mm - STEAM MP 10 barg G STMP IV 600

- MEDIUM PRESSURE STEAM CONDENSATE G CDMP IV 300- HOT MP DEMIN WATER G WDMH III.1 50- STEAM MP SUPERHEATED U SSMP III.1 300

300 # LOW TEMPERATURE 51,1 -41.5 / 38 BALL 200RF CARBON STEEL 46.6 100 GATE

Spiral wound Graphite/316/int. Ring C.A. = 1,5 mm 44 145 GLOBE- HP WET PLANT AIR U APHP V-III 200- HP INSTRUMENT AIR G AIHP V-III 150

300 # LOW TEMPERATURE PLUG 300RF CARBON STEEL 19/FV -41.5 / 95 GLOBE

Spiral wound Graphite/316/int. Ring C.A. = 1,5 mm - VCM GAS 19 BAR PVC-S VCG4 Aa-I 300

(LOW EMISSION)





ABOVE GROUND

ABOVE GROUND



ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

3825

3829

ABOVE GROUND

3827

3830

3826

3828

14/18


9631U-G JSD 1300 0021 3

page

GASKET P T


Dia.max

Unit


group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-


LASS

MATERIAL


DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

Project N° - Unit

300 # LOW TEMPERATURE 15 / FV* -41.5 / 250 GATE 150RF CARBON STEEL 15 250 PLUG

Spiral wound Graphite/316/int. Ring C.A. = 3,0 mm - CATALYST PNEUMATIC CONVEYOR V CATA Aa-I GLOBE 150

300 # LOW TEMPERATURE 51,1 -41.5 / 38 GLOBE 300RF CARBON STEEL FV*/46.2 115 GATE

Spiral wound Graphite/316/int. Ring C.A. = 3 mm - FEED WATER G WFE V-III 300

300 # LOW TEMPERATURE 25 -41.5 / 80 PLUG 300RF CARBON STEEL 24 120 GATE

Spiral wound Graphite/316/int. Ring C.A. = 3,0 mm - MEDIUM PRESSURE ETHYLEN G ETMP Ba-II GLOBE 300

300 # LOW TEMPERATURE 51,1 -41.5 / 38 PLUG 300RF CARBON STEEL FV/47.3 60/90 GLOBE

Spiral wound Graphite/316/int. Ring C.A. = 3,0 mm - LIQUID VCM PVC-E VCME Aa-I (bellows sealed) 300BUTTERFLY

BALL (fullbore)(LOW EMISSION)

150 # DUPLEX SS FV* / 6 -41.5 / 180 800RF C.A. = 3,0 mm

Spiral wound Graphite/SS UNS 31803/int. Ring

EDC LIQUID V ELDE Aa-I GATE 800

150 # LOW TEMPERATURE 17.6 -30 / 38 PLUG 450RF CARBON STEEL FV*/14.6 100/180 BUTTERFLY

PTFE C.A. = 0 mm (PTFE lined)PTFE lined - MOIST AND ACID GASEOUS EDC V EGXA Aa-I BALL 450

- MOIST AND ACID LIQUID EDC V ELXA Aa-I DIAPHRAGM 150- ACID WATER FROM X QUENCH V LQX Aa-I 100- ACID VENT FROM X QUENCH V VQX Aa-I 100- WASTE WATER SOVOX (*) M WWS V-IV 100

300 # LOW TEMPERATURE 51.1 -41.5 BALL 250RF CARBON STEEL 40 60 BUTTERFLY

PTFE C.A. = 0 mm FV*/15 -46/85 PLUGPTFE lined - DECHLORATED COOLED BRINE M B9 Ab-I 100

- MOIST GASEOUS CIH TO DESTRUCTION V CLHM Aa-I 250









ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND

4743

ABOVE GROUND

5820

ABOVE GROUND

3832

3831

3834

ABOVE GROUND

3833

5721

15/18


9631U-G JSD 1300 0021 3

page

GASKET P T


Dia.max

Unit


group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-


LASS

MATERIAL


DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

Project N° - Unit

150 # HAST 20 -41.5 / 38 PLUG 200RF (UNS N10276) FV*/18.4 80

CONVEX type B47A Kempchen C.A. = 0 mm - ETHYL CHLOROFORMATE PVC-S X16 Aa-I 150- H2O2 REACTOR (as 35%) PVC-S HPR Aa-I 25- NaCl REACTOR PVC-S NAR Aa-I 80- NaOH 20% REACTOR PVC-S SCR Aa-I 25- INITIATOR REACTOR PVC-S X17R Aa-I 50- NITROGEN REACTOR PVC-S N8R Aa-I 50- ISU DEGASSING REACTOR PVC-S VTR Aa-I 100

150 # MONEL 400 15 -41.5 / 60 GLOBE 150RF (UNS N04400) 15 240 ( GABLER valve Bronze)

Spiral wound Graphite/Monel/int. Ring C.A. = 0 mm - OXYGEN MONEL V OM V-IV 150

300 # TITANIUMRF C.A. = 0 mm 14.1 275 400

Spiral wound PTFE/Titanium/int. Ring B8-Gr.8 HOT GASEOUS EDC FROM OXY REACTOR V EGXX Aa-I GLOBE 400

150 # GRP 10 90 BALL 500RF (DERAKANE 411) BUTTERFLY

EPDM - BIOLOGICAL SLUDGES SOLUTION W SLBW Vb-V (**) PLUG 150- SLUDGES SOLUTION - PCT CVM W SLVW Ab-II (**) DIAPHRAGM 150- SLUDGES ex UTILITIES M/G SLG Ab-II 100- SULFATED BRINE PURGE M BRPS Ab-II 80- BRINE PURGE G BRP Ab-II 100- CLARIFIED BRINE M B2 Ab-II (**) 300- SAND FILTRATED BRINE M B3 Ab-II (**) 300- RAW BRINE M B1 Ab-II 500- BRINE FROM BACK WASHING M B12 Ab-II (**) 200- DEPLETED DECHLORINATED BRINE M B7 Ab-II (**) 350- DILUTED BRINE M B11 Ab-II (**) 150- ISU WASTE WATER PVC-S WWI Ab-II (**) 100- Na2CO3 6% (Carbonate de sodium) M SA10 Ab-II 100- DEPLETED LOW CHLORINATED BRINE OUTDOOR M B6E Ab-II 250 3- BRINE SUPER EPURATED 1 OUTDOOR M BSP1 Vb-V (**) 300 3

150 # GRP -0,2 95 DIAPHRAGM 600RF GRP-VE-NK/CB 2 95 BUTTERFLY

EPDM C.B. = 6 mm - Cl2 WET VENT M CLWV Aa-I (**) GLOBE 600- CAUSTIC VENT M/S VSC Aa-I PLUG 100


7826 ABOVE GROUND

ABOVE GROUND

6722

6720

8120

ABOVE GROUND


Anticorrosion layer : 3,3 mm

ABOVE GROUND

ABOVE GROUND



8121

16/18


9631U-G JSD 1300 0021 3

page

GASKET P T


Dia.max

Unit


group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-


LASS

MATERIAL


DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

Project N° - Unit

150 # COMPOSITE (note 2) 6 -10.0 / 50 DIAPHRAGM 500RF GRP-VE-NK/PP 9 95 BUTTERFLY

EPDM PP : 3 à 5 mm - ALKALINE SOLUTION IN PP PIPE (D) V ALKP Ab-II (**) PLUG 400- MOIST HYDROGEN CHLORIDE V HCLP Aa-I BALL 300- PHOSPHORIC ACID W SPA Aa-I (**) 80- DEGASSING ISU PVC-S VT Aa-I 500

150 # GRP BALL 400RF (DERAKANE 470) 8,5 -40 / 90 BUTTERFLY

EPDM C.B. = 3.3 mm - ALKALINE SOLUTION IN FRP (D) V ALKD Ab-II (**) PLUG 400- ACID SOLUTION IN DERAKANE 470 PIPE V HCLD Aa-I (**) DIAPHRAGM 300- HCL VENT GAS V HCLV Aa-I 300- HCl 20% (*) G HCL2 Aa-I 150

150 # COMPOSITE (note 2) -0,3 60 BALL 600RF GRP-VE-BA/PVC-U 8 60 BUTTERFLY

EPDM PVC-U : 3 à 5 mm - H2SO4 55% (48% to 75%) (*) G & M SAL (*) Aa-I (**) DIAPHRAGM (on CLWC) 100- CL2 WET COOLED M CLWC Aa-I (**) PLUG 600- VENT DISCHARGE TO ATMOSPHERE M VA Vb-V (**) 300

150 # COMPOSITE (note 2) -0.3 / 6,4 95 BALL 500RF GRP-VE-NK/PVC-C -0.3 / 2 60 BUTTERFLY

EPDM PVC-C : 3 à 5 mm - CHLORINATED CONDENSATE M CDCL Aa-I PLUG 100- ANOLYTE (*) M BAN Aa-I (**) DIAPHRAGM 450- HCl 20% at 90°C (*) M HCLH Aa-I (**) 300

M CLDC Aa-I ( ) - protective shield on all flanges 500

150 # COMPOSITE (note 2) BALL 300RF GRP-VE-NK/PVC-C FV* /10 -10/ 85 BUTTERFLY

EPDM PVC-C 3 à 5 mm - FeCl3 SOLUTION W X8S Ab-II (**) PLUG 80- DEPLETED LOW CHLORINATED BRINE M B6 Ab-II DIAPHRAGM 250- BRINE SUPER EPURATED 1 M BSP1 Vb-V (**) 300- ANTHRACITE FILTRATED BRINE M B4 Ab-II (**) 300- H2SO4 96-98% (*) M SAH (*) Ab-II 100- BIODISPERSANT PVC-U BIOD Ab-II 80

150 # COMPOSITE (note 2) -0.1 / 8 95 BALL 500RF GRP-VE-NK/PP 10 85 BUTTERFLY

EPDM PP : 3 à 5 mm PLUG- Ix REGENERATION FLUID M RF Ab-II DIAPHRAGM 300- NaOH 32% HOT / CATHOLYTE (*) M SC3H Aa-I (**) 500- NaOH (M) 20% (*) M SC4C Aa-I 80

- CL2 DRY COOLED








8125

ABOVE GROUND

8122

8124

ABOVE GROUND

ABOVE GROUND



ABOVE GROUND


8123

ABOVE GROUND

8126

8127

ABOVE GROUND

17/18


9631U-G JSD 1300 0021 3

page

GASKET P T


Dia.max

Unit


group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-


LASS

MATERIAL


DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

Project N° - Unit

150 # COMPOSITE (note 2) 0,5 95 BUTTERFLY 700RF GRP-VE-NK/PVC-C -0,3 95 PLUG

EPDM PVC-C : 3 à 5 mm - CL2 WET HOT M CLWH Aa-I DIAPHRAGM 700

150 # COMPOSITE (note 2) -0.1 5 BALL 600RF GRP-VE-NK/PP 0,5 95 DIAPHRAGM

EPDM PP : 3 à 5 mm - H2 ELECTROLYSIS 90°C M H290 B-III (**) BUTTERFLY 600PLUG

150 # COMPOSITE (note 2) 6,4 95 BUTTERFLY 600RF GRP-VE-NK/PVC-C FV 95 PLUG

EPDM PVC-C : 3 à 5 mm - CL2 VACUUM HOT M CLVH Aa-I (**) BALL 600- ANOLYTE VACUUM (*) M BANV Aa-I (**) DIAPHRAGM (on CLWC) 300

150 # GRP BALL 200RF (DERAKANE 470) 6 80 BUTTERFLY

EPDM - WASTE WATER VCM G WWV V-V PLUG 200DIAPHRAGM

150 # COMPOSITE (note 2) BALL 400RF GRP-VE-BA/PVC-U -0,3 / 10 60 BUTTERFLY

EPDM PVC-U : 3 à 5 mm - DEMINERALIZED WATER (FOR EMC002/SMC001) M WDP V-V PLUG 25- PLANT AIR TO TMC010 & TMC011 M APP V-V DIAPHRAGM 25- HYPOCHLORITE (*) M HYPO Vb-V (**) 400- ANTISCALE & CORROSION INHIBITOR G CORR B-III (**) 40

150 # COMPOSITE (note 2) BALL 200RF GRP-VE-NK/PVC-C 1 80 BUTTERFLY

EPDM PVC-C : 3 à 5 mm - BIO SLUDGE WATER RECIRCULATION W WWBR Vb-V (**) PLUG 200DIAPHRAGM

150 # COMPOSITE (note 2) DIAPHRAGM 80RF GRP-VE-NK/PVC-C FV/6 95 PLUG

EPDM PVC-C : 3 à 5 mm - WASTE WATER WITHOUT ORGANIC M WWWO Vb-V (**) BALL 80

ABOVE GROUND

ABOVE GROUND

ABOVE GROUND



ABOVE GROUND

ABOVE GROUND







8134

8130

Anticorrosion layer : 3,3 mm

8135

8131

8133


ABOVE GROUND

ABOVE GROUND

8129

8128

18/18


9631U-G JSD 1300 0021 3

page

GASKET P T


Dia.max

Unit


group acc. to PB 03-585-03 / 10-573-03 (5)(*) / SN 550-


LASS

MATERIAL


DESIGN CONDITIONS


Cod

e flu

id

RATING / FACE

Project N° - Unit

3 60150 # PE-HD 10 50 BALL 300

RF (PE 100) 0,5 70 BUTTERFLY 3EPDM C.A. = 0 mm - CONTAMINATED RAIN WATER/CHEMICAL SEWER V CRD Ab-II (**) 300

- POTABLE WATER UNDERGROUND G WPU Vb-V 100M SLGU Ab-II (**) 300

150 # PP GATE 300RF C.A. = 0 mm 1 95

EPDM - PROCESS DRAIN TO PIT M PDTP Aa-I (**) 300

150 # PVC-U 300RF CA = 0mm 1 60

EPDM - BIOTREATMENT SLUDGE (UNDERGROUND) W SLBU Vb-V (**) 150

- Minimum design temperature due to site conditions is minus 41.5°C unless more stringent conditions indicated in column Design Temperature.

- All ball valves are ball valve full bore type excepted when "reduce bore" is mentioned in column "BLOCK VALVE" .(1) - shall be confirmed later(2) - Electrical tracing on emergency power required for outdoor lines, maintained temperature = 5°C,(3) - Design condition 0.5 barg/530°C is exceptional condition for VGH fluid (decocking). Extremely rare situation, only if no liquid in Vessel (Maximum 2 times per year during 15 minuts and 10 hours over 20 years) - Protection by means of ESD.(4) - Ball Valves shall have Orifice in ball for depressurisation(5) - Piping class rules under PB 03-585-03 regulation are all metallic piping classes except 2732; 2822; 3735; 3740; 3824; 3828; under PB 10-573-03 regulation. Plastic; GRP & Composite piping classes are under civil norm SN 550-82.(6) - Upset conditions at BVP012 outlet = 12.8 bar g / 500°C.


- * after FV means that Full Vacuum conditions appear occasionally (start-up, shut down, etc), not in permanent service conditions.

9121 ABOVE GROUND

Notes :



- SLUDGES UNDERGROUND

9120

UNDERGROUND

9122UNDERGROUND

9631u-g-jsd-1300-0021-3

Documents