a700 e manual

8/12/2019 a700 e Manual

1/132

OWNERS MANUALThis manual will show you how to useyour FUJIFILM DIGITAL CAMERAFinePix A700 correctly.Please follow the instructions carefully.

BL00570-200(1)

Getting Ready

Using the Camera

Advanced Features Photography

SettingsCamera Connection

SoftwareInstallation

Playback

Movie

Appendices

Troubleshooting

8/12/2019 a700 e Manual

2/132

8/12/2019 a700 e Manual

3/132

3

IMPORTANT

NOTICEBEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILMCorporation, PLEASE READ THIS END USER LICENSE AGREEMENTCAREFULLY. ONLY IF YOU AGREE WITH THIS AGREEMENT,SHOULD YOU USE THE SOFTWARE RECORDED ON THE CD-ROM.

BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BEBOUND BY THIS AGREEMENT.

End User License AgreementThis End User License Agreement (Agreement) is an agreement betweenFUJIFILM Corporation (FUJIFILM) and you, which sets forth the termsand conditions of the license granted for you to use the software providedby FUJIFILM.The CD-ROM contains third party software. In case a separate agreementis provided by a third party supplier for its software, the provisions of suchseparate agreement shall apply to the use of such third party software,prevailing over those of this Agreement.

1. Definitions.(a) Media means the CD-ROM titled Software for FinePix BZ- whichis provided to you together with this Agreement.

(b) Software means the software which is recorded on Media.(c) Documentation means the operation manuals of Software and

other related written materials which are provided to you togetherwith Media.

(d) Product means Media (including Software) and Documentationcollectively.

2. Use of Software.FUJIFILM grants to you a nontransferable, nonexclusive license:(a) to install one copy of Software onto one computer in binary machine

executable form;(b) to use Software on the computer onto which Software is installed; and

(c) to make one backup copy of Software.3. Restrictions.3.1 You shall not distribute, rent, lease or otherwise transfer all or any

part of Software, Media or Documentation to any third party withoutFUJIFILMs prior written consent. You also shall not sublicense,assign or otherwise transfer all or any part of the rights granted toyou by FUJIFILM under this Agreement without FUJIFILMs priorwritten consent.

3.2 Except as expressly granted by FUJIFILM hereunder, you shall notcopy or reproduce all or any part of Software or Documentation.

3.3 You shall not modify, adapt or translate Software or Documentation.You also shall not alter or remove copyright and other proprietarynotices that appear on or in Software or Documentation.

3.4 You shall not, or shall not have any third party, reverse-engineer,decompile, or disassemble Software.

4. Ownership.All copyrights and other proprietary rights to Software and Documentation areowned and retained by FUJIFILM or the third party suppliers as indicated onor in Software or Documentation. Nothing contained herein shall beconstrued, expressly or implicitly, as transferring or granting any right, license,or title to you other than those explicitly granted under this Agreement.

5. Limited Warranty.FUJIFILM warrants to you that Media is free from any defect in materialand workmanship under normal use for ninety (90) days from the dateof your receipt of Media. Should Media not meet the foregoing warranty,FUJIFILM shall replace such defective Media with other Media bearingno defect. FUJIFILMs entire liability and your sole and exclusiveremedy with regard to any defect in Media shall be expressly limited tosuch FUJIFILMs replacement of Media as provided herein

6. DISCLAIMER OF WARRANTY.EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDESPRODUCT AS IS AND WITHOUT WARRANTIES OF ANY KIND,EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY,EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS,INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY

COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHERPROPRIETARY RIGHTS OF ANY THIRD PARTY, MERCHANTABILITY,OR FITNESS FOR ANY PARTICULAR PURPOSE.

7. LIMITATION OF LIABILITY.IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANYGENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FORLOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THEUSE OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HASBEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

8. No export.You acknowledge that neither Software nor any part thereof, will betransferred, or exported to any country or used in any manner in violationof any export control laws and regulations to which Software is subject.

9. Termination.In case you breach any of the terms and conditions hereof, FUJIFILMmay immediately terminate this Agreement without any notice.

10.Term.This Agreement is effective until the date when you cease to useSoftware, unless earlier terminated in accordance with Section 9 hereof.

11. Obligation upon termination.Upon termination or expiration of this Agreement, you shall, at your ownresponsibility and expense, delete or destroy immediately all Software(including its copies), Media and Documentation.

12. Governing Law.This Agreement shall be governed by and construed in accordance withlaws of Japan.

Be sure to read this page before using the software.

8/12/2019 a700 e Manual

4/132

4

EC Declaration of ConformityWeName: Fuji Photo Film (Europe) GmbHAddress: Heesenstrasse 31

40549 Dusseldorf, Germany

declare that the productProduct Name: FUJIFILM DIGITAL CAMERA FinePix A700Manufacturers Name: FUJIFILM CorporationManufacturers Address: 26-30, Nishiazabu 2-chome, Minato-ku,

Tokyo 106-8620, Japan

conforms to the following Standards:Safety:EN60065EMC: EN55022: 1998 Classe B

EN55024: 1998EN61000-3-2: 1995 + A1: 1998 + A2: 1998

following the provision of the EMC Directive (89/336/EEC, 92/31/EEC and93/68/EEC) and Low Voltage Directive (73/23/EEC).

Dusseldorf, Germany

Place

September 1, 2006

This product comes with batteries. When these are empty, you shouldnt throw themaway but deliver them as domestic chemical refuse.

Signature/Managing DirectorDate

8/12/2019 a700 e Manual

5/132

5

Disposal of Electric and Electronic Equipment in Private HouseholdsDisposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries withseparate collection systems)

This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that thisproduct shall not be treated as household waste.Instead it should be taken to an applicable collection point for the recycling of electrical and electronicequipment.By ensuring this product is disposed of correctly, you will help prevent potential negative consequences tothe environment and human health, which could otherwise be caused by inappropriate waste handling of thisproduct.

If your equipment contains easy removable batteries or accumulators please dispose these separately according to your localrequirements.The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,please contact your local city office, your household waste disposal service or the shop where you have purchased the product.

In Countries outside the EU:If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.

8/12/2019 a700 e Manual

6/132

6

Contents

Warning................................................................. 2IMPORTANT......................................................... 3EC Declaration of Conformity................................ 4Disposal of Electric and Electronic Equipment

in Private Households...................................... 5Contents................................................................ 6Preface.................................................................. 8About this Manual ............................................... 10Accessories Included .......................................... 11Camera Parts and Features................................ 12Example of LCD Monitor Text Display ................ 13

Getting Ready

Loading the Batteries .......................................... 14Checking the battery charge ....................... 16

Loading thexD-Picture Card ......................... 17Turning On and Off ............................................. 19Setting the Date and Time .................................. 20Correcting the Date and Time............................. 22Selecting the Language ...................................... 23

Using the CameraTaking Pictures (a AUTO Mode) ..................... 24

Taking pictures with the focus and exposurelocked....................................................... 28

Adjusting the shot composition ................... 30Viewing the Images............................................. 31o Erasing the Images/Movies ............................ 34

Advanced Features Photography

Using the Photography Functions Procedure of Setting...................................... 36

Setting the Shooting Mode................................. 38e Macro (Close-up)........................................... 40d Setting the Flash............................................. 41Photography Menu Operation ............................ 43

Setting the menus ...................................... 43Selecting quality setting(y QUALITY).......................................... 45

Taking pictures using self-timer(* SELF-TIMER).................................... 46

Specifying sensitivity setting (S ISO)........ 48Adjusting exposure compensation

(S EV)................................................... 49Adjusting color balance

(T WB) .................................................. 50

Advanced Features PlaybackUsing Playback Menu......................................... 51

Setting the menus ...................................... 51DPOF set frame (u DPOF)....................... 51Protecting the images

(i PROTECT)....................................... 54

Automatic Playback(g PLAYBACK)..................................... 55Copying the images (V COPY)................ 56Recording voice memos

(# VOICE MEMO).................................. 57Playing back voice memo .......................... 59Trimming (Y TRIMMING) ......................... 61

8/12/2019 a700 e Manual

7/132

8/12/2019 a700 e Manual

8/132

8

PrefaceZ Test Shots Prior to PhotographyFor important photographs (such as weddings andoverseas trips), always take a test shot and view theimage to make sure that the camera is working normally. FUJIFILM Corporation cannot accept liability for any

incidental losses (such as the costs of photography orthe loss of income from photography) incurred as aresult of faults with this product.

Z Notes on CopyrightImages recorded using your digital camera system cannotbe used in ways that infringe copyright laws without theconsent of the owner, unless intended only for personaluse. Note that some restrictions apply to the

photographing of stage performances, entertainmentsand exhibits, even when intended purely for personal use.Users are also asked to note that the transfer ofxD-Picture Card containing images or data protectedunder copyright laws is only permissible within therestrictions imposed by those copyright laws.

Z Handling Your Digital CameraThis camera contains precision electronic components.To ensure that images are recorded correctly, do notsubject the camera to impact or shock while an image isbeing recorded.

Z Liquid CrystalIf the LCD monitor is damaged, take particular care withthe liquid crystal in the monitor. If any of the followingsituations arise, take the urgent action indicated. If liquid crystal comes in contact with your skin

Wipe the area with a cloth and then wash thoroughlywith soap and running water.

If liquid crystal gets into your eyeFlush the affected eye with clean water for at least 15minutes and then seek medical assistance.

If liquid crystal is swallowedFlush your mouth thoroughly with water. Drink largequantities of water and induce vomiting. Then seekmedical assistance.

Z Damaged by Water or SandFinePix A700 can be damaged on the inside and outsideby water and sand. When you are at the beach or close towater, make sure that the camera is not damaged bywater or sand. Take care not to place the camera on a wetsurface.

Z Damaged by CondensationIf the camera is carried from a cold location into a warmplace, water droplets (condensation) may form on theinside of the camera or on the lens. When this occurs, turnthe camera off and wait an hour before using the camera.Condensation may also form on thexD-Picture Card . Inthis event, remove thexD-Picture Card and wait a shorttime.

8/12/2019 a700 e Manual

9/132

9

Z Trademark Information and xD-Picture Card are trademarks of

FUJIFILM Corporation. IBM PC/AT is a registered trademark of International

Business Machines Corp. of the U.S.A. Macintosh, Power Macintosh, iMac, PowerBook, iBook

and Mac OS are trademarks of Apple Computer, Inc.,registered in the U.S. and other countries.

Microsoft, Windows, and the Windows logo aretrademarks, or registered trademarks of MicrosoftCorporation in the United States and/or other countries.Windows is an abbreviated term referring to theMicrosoft Windows Operating System.

* The Designed for Microsoft Windows XP logo refersto the camera and the driver only.

Other company or product names are trademarks orregistered trademarks of the respective companies.

Z Notes on Electrical InterferenceIf the camera is to be used in hospitals or aircrafts, pleasenote that this camera may cause interference to otherequipment in the hospital or aircraft. For details, pleasecheck with the applicable regulations.

Z Explanation of Color Television System

Z Exif Print (Exif ver. 2.2)Exif Print Format is a newly revised digital camera fileformat that contains a variety of shooting information foroptimal printing.

* See Using Your Camera Correctly ( p.97) for moreinformation.

NTSC: National Television System Committee, colortelevision telecasting specifications adoptedmainly in the U.S.A., Canada and Japan.

PAL: Phase Alternation by Line, a color televisionsystem adopted mainly by European countriesand China.

8/12/2019 a700 e Manual

10/132

10

About this Manual

Z 4-direction ( nopq ) buttonUp, down, left, and right are indicated by black triangles in the Owners Manual. Up or down is shown asn or o , and left orright is shown asp or q .

CAUTION

This mark denotes issues that may affect thecameras operation.

CHECKThis mark denotes points to notice in thecameras operation.

MEMOThis mark denotes additional topics thatcomplement the basic operating procedures.

Icons indicate the modes that are available.

When pressingq :

When pressing MENU/OK:

8/12/2019 a700 e Manual

11/132

11

Accessories Included

AA-size Alkaline Batteries (LR6) (2)

Strap (1)

A/V cable (1)Including plug topin-plug 2

USB cable (mini-B) (1)

CD-ROM (1)Software for FinePix BZ

Owners Manual (this manual) (1)

Attaching the strap

Attach the strap as shown in 1 and 2.When attaching the strap, move the fastener to adjust the

length and slightly away from the end of the strap, asshown in figure 1.

2 1

8/12/2019 a700 e Manual

12/132

12

Camera Parts and Features Refer to the pages in parentheses for information on using the camera parts or features.

A Shutter buttonB MicrophoneC Lens (lens cover)D Self-timer lamp (p.47)E POWER buttonF SpeakerG Flash (p.41)H ; USB socket (mini-B)I A/V OUT (audio/visual output) socket (p.76)J DC IN 3V (power input) socket (p.76)K Indicator lamp (p.27)L w Playback buttonM LCD monitorN Tripod mountO xD-Picture Card slot (p.17)P Battery compartment (p.15)Q p / e Macro button (p.40)R q / d Flash button (p.41)S n / [ Tele zoom switch (p.25, 32)T o / ] Wide zoom switch (p.25, 32)U Strap mountV MENU/OK buttonW DISP (display) / BACK button (p.30, 31)X Battery cover (p.14)

M EN U

D ISP/ BAC K

/ OK

O P

E N

8/12/2019 a700 e Manual

13/132

13

Example of LCD Monitor Text DisplayZ Photography mode

Z Playback mode

FinePix A700 has internal memory that can store images withoutxD-Picture Card . Y appears on the LCD monitor when theinternal memory is active.

1/ 1/2006

ISON

200 6

- 1 1 3

AF

A * Self-timer (p.46)B e Macro (close-up) (p.40)C C Flash (p.41)D s Photography mode

(p.38)E Zoom bar (p.25)F Date (p.20)G 6 White balance (p.50)H N Quality mode (p.45)I Number of available

frames (p.117)

J ISO 200 Sensitivity (p.48)K C Battery level warning

(p.16)L { AF warning (p.25)M | Camera shake

warning (p.26)N Y Internal memory (p.18)O S Exposure

compensation (p.49)P AF frame (p.25)

12:00 AM

100-0009

1/ 1/2006

A w Playback mode (p.31)B u DPOF (p.51)C F Protection (p.54)D Zoom bar (p.32)E Date (p.20)F Frame number (p.71)G C Battery level warning

(p.16)H Y Internal memory (p.18)I Time (p.20)

8/12/2019 a700 e Manual

14/132

14

Loading the BatteriesBatteries are required to operate the digital camera. Atfirst, load the batteries in the camera.

Z Compatible batteriesAA-size alkaline batteries (2) or AA-size Ni-MHrechargeable batteries (2) (sold separately)

CAUTION

Never use the following types ofbatteries, as they could causeserious problems such as batteryfluid leakage or overheating:1.Batteries with split or peeling

outer casings2.Combinations of different types

of batteries or new and used batteries together Do not use manganese or Ni-Cd batteries. Use the same brand and grade AA-size alkaline

batteries as those supplied with the camera.

1 Open the battery cover.

CHECK

Check that the camera is turned off before opening thebattery cover.

CAUTION

Do not open the battery cover while the camera is on.This could damage the xD-Picture Card or ruin theimage files on thexD-Picture Card .

Do not apply force to the battery cover.

Outer casing

14

8/12/2019 a700 e Manual

15/132

15

G e t t i n g R e

a d y

2 Load the batteries correctly as indicated bythe polarity icons.

CAUTION

Match the polarity icons (+ and , ) of the batteries tothose on the inside of the battery cover.

3 Close the battery cover.

8/12/2019 a700 e Manual

16/132

16

Loading the Batteries

Checking the battery chargeTurn the camera on and check the battery charge.

A There is ample battery charge. (Not displayed)B There is insufficient charge left in the batteries. The

batteries will soon run out. Have a new set of batteriesready. (Lit red)

C The batteries are depleted. The display will shortly goblank and the camera will stop working. Replace orrecharge the batteries. (Blinking red)

CAUTION

Soil, such as fingermarks on the poles of the batteries,can shorten time for which the batteries can be used.

The time for which AA-size alkaline batteries (referredto hereafter simply as alkaline batteries) can be used

varies depending on the brand. Some brands of alkalinebatteries may stop providing power more quickly thanthose supplied with the camera. Note also that due totheir nature, the time for which alkaline batteries can beused decreases in cold conditions (0C to +10C/+32Fto +50F). For this reason, it is better to use AA-size Ni-MH batteries.

Due to the nature of the battery, the battery levelwarning (C or V ) may appear early when thecamera is used in cold locations. Try warming thebatteries in your pocket or a similar location before use.

Depending on the battery type and the level of chargein the batteries, the camera may run out of power

without first displaying a battery level warning. This isparticularly likely to happen when batteries that haverun out of charge once are re-used.

Depending on the camera mode, the transition fromC to V may occur more quickly.

Use Fujifilm Battery charger (sold separately) to chargeAA-size Ni-MH batteries.

See p.98-99 for information on the batteries. When first purchased or if left unused for a long period,

the amount of time which AA-size Ni-MH batteries canbe used may be short. See p.99 for more information.

Battery power consumption varies greatly dependingon use. When you change to Playback mode fromPhotography mode,C may not occur, however,V may suddenly blink red and the camera may stopoperation.

8/12/2019 a700 e Manual

17/132

17

G e t t i n g R e

a d y

Loading the xD-Picture Card

Although you can store pictures in the cameras internalmemory, you can store many more images on thexD-Picture Card (sold separately). There is a slot for thexD-Picture Card inside the battery compartment.

1 Open the battery cover.

2 Insert an xD-Picture Card .

3 Close the battery cover.

How to replace the xD-Picture Card

Push the xD-Picture Card into the slot and then slowlyremove your finger. The lock is released and thexD-PictureCard is pushed out.

Continued Q

Gold marking

Gold contact area

Align the gold marking with thegold contact area and insert it

all the way into the slot.

8/12/2019 a700 e Manual

18/132

18

Loading thexD-Picture Card

CAUTION

When storingxD-Picture Card s, make sure that theyare kept out of the reach of children. AnxD-PictureCard could be swallowed and cause suffocation. If achild swallows anxD-Picture Card , seek medical

attention or call emergency number right away. If thexD-Picture Card is oriented incorrectly, it will notgo all the way into the slot. Do not apply force wheninserting anxD-Picture Card .

Note that thexD-Picture Card may spring out if yourelease your finger quickly from the card immediatelyafter the lock is released.

Operation of this camera is only guaranteed when it isused with FUJIFILMxD-Picture Card .

See p.102 for information on thexD-Picture Card .

MEMO The size of an image file varies depending on the

subject. For this reason, the number recorded may notrepresent the actual number of frames.

See p.117 for information on standard number ofavailable frames.

Z About internal memory

When an xD-Picture Card (sold separately) is inserted[Record images]: Record images to anxD-Picture

Card .[Playback images]: Playback images in anxD-Picture

Card .

When an xD-Picture Card (sold separately) is notinserted[Record images]: Record images to internal memory.[Playback images]: Playback images in internal memory.

Z About images in the internal memoryImages held in the cameras internal memory may becorrupted or erased due to problems such as camerafaults. Save your important data to another media (i.e.,DVD-R, CD-R, CD-RW, hard disk, etc.).It is possible to transfer saved images on the internalmemory to anxD-Picture Card ( p.56).

ISO200

6 FinePix A700 has internal memorythat can store images withoutxD-Picture Card . Y appears on theLCD monitor when internalmemory is active.

i O d Off

8/12/2019 a700 e Manual

19/132

19

G e t t i n g R e

a d y

Turning On and Off

Turning the camera on inPhotography mode

Changes between Photography mode andPlayback modePress w during shooting to change to Playback mode.Press the shutter button down halfway to return toPhotography mode.

CAUTION

The lens moves and the lens cover opens when turningthe camera on in Photography mode. Take care not toobstruct the lens.

Take care not to get fingerprints on the camera lens asthis will result in impaired image quality in your shots.

Turning the camera on inPlayback mode

MEMOTo change to Photography mode, press the shutter button

down halfway.

POWER

Press POWER down fully

to turn the camera on.Press POWER again toturn the camera off.

MENU

DISP/ BAC K

/ OK

O P

E N

Press w for about 1

second to turn thecamera on in Playbackmode.Press POWER to turnthe camera off.

S i h D d Ti

8/12/2019 a700 e Manual

20/132

20

Setting the Date and TimeWhen using the camera for the first time after purchasing,the date and time are cleared. Set the date and time.

1 DATE/TIME NOT SET message appearswhen turning the camera on.

2 Set the date and time.

MEMO Holding downn or o changes the numbers

continuously. When the time displayed passes 12, the AM/PM

setting changes.

Press MENU/OK to set the date andtime.

SET NO

DATE/TIMENOT SET A Press p or q to select Year,

Month, Day, Hour, or Minute.

B Press n or o to correct thesetting.

DATE/TIME

SET CANCEL

YY. MM. DD

2006 . 1 . 1

12 : 00 AM

8/12/2019 a700 e Manual

21/132

21

G e t t i n g R e

a d y

3 Change the date format.

Date format YY.MM.DD: 2006.9.24MM/DD/YY: 9/24/2006DD.MM.YY: 24.9.2006

MEMODATE/ TIME NOT SET message also appears when thebatteries have been removed and the camera has beenleft for a long period.Once the AC power adapter has been connected or the

batteries have been installed for 30 minutes or more, thecamera settings will be retained for roughly 2 hours evenif both sources of power are removed.

When the Auto power off function is active, if the camerais left unused for 2 or 5 minutes, this function turns thecamera off ( p.73). To turn the camera back on, pressPOWER. To play back images, hold downw for about 1second.

SET CANCEL

DATE/TIME

MM/DD/YY

9 / 24 / 2006

10 : 00 AM

A Press p orq to select the dateformat.

B Press n or o to set the format.

C Always press MENU/OK after thesettings are completed.

Auto power off function

Correcting the Date and Time

8/12/2019 a700 e Manual

22/132

22

Correcting the Date and Time

1 Open the SET-UP menu. 2 Display the DATE/TIME screen.

A Press MENU/OK to open themenu.

B Press p or q to select U OPTION.

C Press n or o to select SET-UP.

D Press MENU/OK to open theSET-UP menu.

OPTION

LCDSET-UP

A Press p orq to select option 3.

B Press o to select DATE/TIME.

C Press q .See 2 Set the date and time.( p.20).

2 31 4

SET CANCEL

TIME DIFFERENCE /LANG.

USB MODE

:SET :SET :SET

SET-UP

DATE/TIME SET

Selecting the Language

8/12/2019 a700 e Manual

23/132

23

G e t t i n g R e

a d y

Selecting the Language

1 Open the SET-UP menu. 2 Select the language.


B Press p or q to select U OPTION and then pressn oro to select SET-UP.

C Press MENU/OK to open theSET-UP menu.

OPTION

LCDSET-UP

A Press p orq to move to option3.

B Press n or o to select.

C Press q to select ENGLISH,FRANCAIS, DEUTSCH,ESPAOL, ITALIANO, ,

, , ,, NEDERLANDS

or . Press q to cyclethrough the language settings.

2 31 4

SET CANCEL

TIME DIFFERENCE

USB MODE

:SET

:SET

SET-UP

DATE/TIME :SET

/LANG. SET

Taking Pictures ( a AUTO Mode)

8/12/2019 a700 e Manual

24/132

24

Taking Pictures ( a AUTO Mode)This section describes the basic operations.

1 Turn the camera on.Press POWER down fully to turn the camera on.

Holding the camera correctly

CAUTION

Moving the camera while shooting gives a blurredpicture (camera shake). Hold the camera steadily withboth hands.

If the lens or flash is obscured by your fingers or thestrap, subjects may be out of focus or the brightness(exposure) of your shot may be incorrect.

POWER

Brace your elbowsagainst your sides andhold the camera withboth hands.

Do not cover thelens or flash withyour fingers.

24

8/12/2019 a700 e Manual

25/132

25

U s i n g t h e C a m e r a

2 Check the composition on the LCD monitor.To adjust zoom scale using the Zoom switch:

MEMO Select e Macro mode to take close-up shots ( p.40). Use digital zoom when you want to shoot the subject

closer ( p.72).

3 Focus on the main subject in the AF frameand press the shutter button down halfway.

CHECK Focus on the subject

Double beep is heardIndicator lamp lit green

Not focus on the subjectNo sound{ indicatedIndicator lamp blinking green

MEMO The shutter button has a halfway point at which focus

and exposure are automatically optimized before takingthe picture by pressing fully down.

When pressing the shutter button halfway, a lensoperation sound may be heard.

Continued Q

66

Focal rangeApprox. 50 cm (1.6 ft.)to infinity

Optical zoom focallength (35 mmcamera equivalent)

Approx. 36 mm to108 mm Max. zoom scale

3

Zoom bar

] wide zoomswitch (Zoom out)

[ tele zoomswitch (Zoom in)

6

AF frame AF framebecomes smallerand camerafocuses on thesubject.

Halfwaypressed

8/12/2019 a700 e Manual

26/132

26

Taking Pictures (a AUTO Mode)

4 Press the shutter button fully.

CAUTION

When taking a picture using the flash, the image maydisappear and go dark briefly due to flash charging. TheIndicator lamp blinks orange during charging.

MEMO When the subject is not in the AF frame, use AF/AE lock

to take the picture ( p.28). When pressing the shutter button down fully in one

motion, the camera takes the picture without the AFframe changing.

Flash

Change the flash mode when you want to take pictures withoutflash. See p.41 for information on flash.

CAUTION

If F is selected for the quality setting, imagerecording time and time required between shotsincreases.

The image shown on the LCD monitor before thepicture is taken may differ in brightness, color, etc. fromthe image actually recorded. Play back the recordedimage to check it ( p.31).

When selecting a slow shutter speed that will causecamera shake, | appears on the LCD monitor. Useflash or a tripod.

See p.104-107 for information on warning displays. SeeTroubleshooting ( p.108-113) for more information.

ClickDoublebeep

Halfway pressed Fully pressed

When pressing the shutterbutton down halfway,b appears on the LCD monitorbefore the flash fires.

8/12/2019 a700 e Manual

27/132

27


Z Indicator lamp displayThe indicator lamp shows camera status lit or blinkingwhen pressing the shutter button.

MEMODetailed warning messages appear on the LCD monitor

(

p.104-107).

Display Status

Lit green Locking the focusBlinking green AF/AE in progress, camera shake

warning, or AF warning (ready toshoot)

Blinking green andorange alternately

Recording toxD-Picture Card orinternal memory (ready to shoot)

Lit orange Recording toxD-Picture Card orinternal memory (not ready)

Blinking orange Charging flash (flash will not fire)Blinking red Warnings forxD-Picture Card and

internal memoryCard not formatted, incorrect format,memory full,xD-Picture Card orinternal memory error

Lens operation error

Indicator lamp

T ki g Pi t (a AUTO M d )

8/12/2019 a700 e Manual

28/132

28


Taking pictures with the focusand exposure locked

In the above composition, the subjects (two people in thiscase) are not in the AF frame. Pressing the shutter buttonhalfway at this point will result in the subjects being out offocus.

AF/AE lock is useful:Use AF/AE lock to guarantee best result when shooting asubject that is not suited to autofocusing ( p.29).

1 Move the camera slightly so that one of thesubjects is in the AF frame.

2 Press the shutter button down halfway tofocus on the subject.

6

Using AF/AE lock

6

Doublebeep

Halfway pressed

8/12/2019 a700 e Manual

29/132

29


3 Continue to hold the shutter button downhalfway. Move the camera back to theoriginal image and press the shutter buttonfully.

MEMO AF/AE lock can be applied repeatedly before the shutter

is released. Use AF/AE lock in all Photography modes to guarantee

excellent results. On FinePix A700, pressing the shutter button down

halfway locks the focus and exposure settings (AF andAE lock).

Subjects not suitable for autofocus FinePix A700 uses a high-precision autofocusing mechanism.However, it may have difficulty focusing on the following:

Subjects photographed through glass Subjects that do not reflect well, such as hair or fur Subjects with no substance, such as smoke or flames Dark subjects Subjects with little or no contrast between the subject and

the background (such as subjects dressed in the same coloras the background)

Shots where another high-contrast object (not the subject) isclose to the AF frame and is either closer or further awaythan your subject (such as a shot of someone against abackground with strongly contrasting elements)

For such subjects use AF/AE lock ( p.28).

Click

Fully pressed

Very shiny subjects suchas a mirror or car body

Fast moving subjects


8/12/2019 a700 e Manual

30/132

30


Adjusting the shot composition

Select the LCD monitor display.

Position the main subject at the intersection of two lines inthis frame or align one of the horizontal lines with thehorizon. Use this frame as a guide to the subjects sizeand the balance of the shot while composing a shot.MENU

DISP/ BACK

/O K

O P

E N

6 6

Press DISP/BACK to

change the LCDmonitor display.

Text displayed

No text displayed

Framing guidelinedisplayed

Best framing

6

Viewing the Images

8/12/2019 a700 e Manual

31/132

31


g gPlayback your images to check them. For importantphotographs, always take a test shot and view the imageto make sure that the camera is working normally.

Setting the camera to Playbackmode

When the camera is off, pressw

for about 1 second toturn the camera on in Playback mode.

MEMOWhen pressing w , the last image shot appears on theLCD monitor.

Select the LCD monitor display.

MENU

DISP/ BACK

/OK

O P

E N

Press w duringshooting tochange toPlayback mode.

10:00 AM

100-0001

9/24/2006

MENU

DI SP/ BAC K

/OK

O P

E N

Text displayed No text displayed

Multi-frameplayback

Press DISP/BACKduring Playbackmode to change theLCD monitor display.

Viewing the Images

8/12/2019 a700 e Manual

32/132

32

Viewing the Images

Single-frame playback

1 Zoom in / Zoom out.To zoom in an image during single-frame playback:

MEMOPress DISP/BACK to cancel playback zoom.

2 Display another part of the image.

To select the required image:Press p : last imagePress q : next image

Selecting images

10:00 AM

100-0001

9/24/2006

To select images on the thumbnaillists screen, hold downp or q for 1 second during playback.When releasingp or q , camerareturns to single-frame playback.

Playback zoom

CANCELPANNING

CANCELPANNING

] switch(Zoom out)

[ switch(Zoom in)

Press [ (n ) or] (o ) to zoomin or out on an image.

Zoom bar

CANCEL

Navigation screen(Current displayed image)

8/12/2019 a700 e Manual

33/132

33


MEMOPress DISP/BACK to return to the zoom setting.

Z Zoom scales

Multi-frame playback Multi-frame playback screen (9 frames) appears on theLCD monitor. Select required frame from the 9 frames.

Still images viewable on FinePix A700This camera will display still images recorded on FinePixA700 or still images (excluding some uncompressedimages) recorded on any FUJIFILM digital camera thatsupports xD-Picture Card s. Clear playback or playbackzooming may not be possible for still images shot oncameras other than FinePix A700.

A Press p or q to move toanother part of the image.

B Press n , o , p , orq to displayanother part of the image.

Quality mode Max. zoom scale

(3072 2304 pixels) Approx. 4.8

% (3264 2176 pixels) Approx. 4.54 (2304 1728 pixels) Approx. 3.62 (1600 1200 pixels) Approx. 2.5

A Press n , o , p , or q to movethe cursor (colored frame) to theselecting frame.

Press n or o repeatedly to jump to the next page.

B Press MENU/OK to enlarge theimage.

o Erasing the Images/Movies Setting the camera to w Playback mode( p.31)

8/12/2019 a700 e Manual

34/132

34

( p )

Use this mode to erase unnecessary images or movies tohave ample free space on the xD-Picture Card or internalmemory.

Selecting FRAME or ALLFRAMES

MEMOTo erase another frame (file), repeat above steps.When erasing frames (files) is completed, press DISP/ BACK.

CAUTION

Pressing MENU/OK repeatedly erases consecutiveframes (files). Take care not to erase a frame (file) bymistake.

A Press MENU/OK to open thePlayback menu.

B Press p or q to select o ERASE.

C Press n or o to select FRAMEor ALL FRAMES.

D Press MENU/OK to confirm yourselection.

BACK

ALL FRAMESFRAME

ERASE

Erasing one frame at a time (FRAME)

A Press p or q to select theerasing frame (file).

B Press MENU/OK to erase thecurrently displayed frame (file).

ERASE OK?

FRAME100-0001

YES CANCEL

Setting the camera tow Playback mode ( p.31)

8/12/2019 a700 e Manual

35/132

35

U s i n g

t h e C a m e r a

MEMO

MEMO When using anxD-Picture Card , the images in the xD-

Picture Card are erased. When not using an xD-Picture Card , the images in the internal memory areerased.

Selecting: BACK returns to single-frame playbackwithout erasing any frames (files).

Protected frames (files) cannot be erased. Unprotectthe frames (files) before erasing them ( p.54).

If DPOF SPECIFIED. ERASE OK? or DPOFSPECIFIED. ERASE ALL OK? appears, press MENU/ OK again to erase the frames (files).

CAUTION

Erased frames (files) cannot be recovered. Back upimportant frames (files) onto your PC or another media.

Erasing all frames (ALL FRAMES)

Press MENU/OK to erase all theframes (files).

TAKE A WHILE

ALL FRAMES100-0001

YES CANCEL

ERASE ALL OK?IT MAY

CANCEL

ALL FRAMESPress DISP/BACK to cancelerasing of all the frames (files).Some unprotected frames(files) will be left unerased.

Using the Photography Functions Procedure of Setting

8/12/2019 a700 e Manual

36/132

36

Specify the camera settings for taking pictures to get thebest result. A general guide is given below.

1 Select the Photography mode.Set the Photography mode from the menu.The camera settings are tailored to the scene beingshot.

2 Specify the photography settings.Pressing buttons or selecting menu allows you tospecify photography functions. You can obtain thebest result for shooting.

Z Specifying functions using buttons

q AUTO This is the easiest mode for takingpictures ( p.38).H PORTRAIT, LANDSCAPE. SPORT8 NIGHT

Select the best Shooting mode for thescene being shot ( p.38-39).

q MANUAL This mode provides detailed settings thatare impossible to set inq AUTO mode( p.39).

SHOOTING MODEPORTRAITAUTOMANUALMOVIE

e Macro Used for close-up shots ( p.40).

d Flash Used for shots in dark locations or forbacklit subjects, etc. ( p.41).

MENU

DISP/

BACK

/OK

O P

E N

e (p ) Macro buttond (q ) Flash button

36

8/12/2019 a700 e Manual

37/132

37

A d v a n c e d F e a t u r e s P h o t o g r a p h y

Z Specifying functions using Photography menu(MENU/OK button)

y QUALITY Use to specify required image size( p.45).

* SELF-TIMERUsed in situations such as groupshots where the photographer isincluded in the shot ( p.46).

S ISO Use to specify required sensitivitysetting ( p.48).

S EV Use this setting to obtain the correctexposure (onlys ) ( p.49).

T WBUse this setting to adjust the colorbalance to suit the color of theambient light around the subject (onlys ) ( p.50).

SELF-TIMER

OFF

MENU

DISP/ BAC K

/ OK

O P

E N

Setting the Shooting Mode

8/12/2019 a700 e Manual

38/132

38

You can select the most suitable setting according to thesubject by selecting one of the Shooting modes.

CHECKSee p.42 for information on available flash modes.

This is the easiest mode for providing crisp and clearshots.Use this mode for ordinary photography.

Camera specifies EV and WB settings automatically.

CHECKFlash cannot be used in the Landscape mode.


B Press p or q to select q SHOOTING MODE.

C Press n oro to select Shootingmode.

D Press MENU/OK to confirm thesetting.

SHOOTING MODE

PORTRAITAUTOMANUALMOVIE

q AUTO ( a )

H PORTRAITUse this mode for photographyto get beautiful skin tones andsoft overall tone.

, LANDSCAPEUse this mode for shootingscenery in daylight andprovides crisp, clear shots ofscenery such as buildings andmountains.

8/12/2019 a700 e Manual

39/132

39


CHECKUse a tripod to prevent camera shake, because a pictureis taken with a slow shutter.

Set the S Exposure compensation ( p.49) and T White balance ( p.50) to manual to easily controlyourself.

. SPORTUse this mode to take picturesof a moving subject.

It gives priority to faster shutterspeeds.

8 NIGHTUse this mode for shootingevening and night scenes.

A picture is taken with a slowshutter of up to 2 seconds.

q MANUAL ( s )

e Macro (Close-up)

8/12/2019 a700 e Manual

40/132

40

Use this mode to take close-up shots.

Available Photography modes:a and s ( p.38, 39)

CHECK Focal range

Wide-angle: approx. 10 cm to 80 cm (3.9 in. to 2.6 ft.)Telephoto: approx. 35 cm to 80 cm (1.1 ft. to 2.6 ft.)

Effective flash rangeApprox. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)

MEMO Use a tripod to prevent camera shake in Macro mode. Any of the following cancels Macro mode:

- Changing the Photography mode setting- Turning the camera off

6 e appears on the LCD monitorindicating that you can takeclose-up shots.

MENU

DISP/ BACK

/OK

O P

E N

Press e (p ) toselect Macro mode.

Press e (p ) againto cancel Macromode.

d Setting the Flash

8/12/2019 a700 e Manual

41/132

41


Flash photography is useful for taking pictures at night orindoor dark locations. Choose from 6 flash modesaccording to the type of shot.

Available Photography modes:

a , H , . , 8 , s ( p.38, 39)

MEMOWhen pressing the shutter button down halfway,b appears on the LCD monitor before the flash fires.

Use this mode for ordinary photography.The flash fires as required by the shooting conditions.

This mode is suitable for shooting portraits in low-lightconditions.

Red-eye effectWhen using the flash to take a picture of people in low-light conditions, their eyes sometimes appear red in thepicture. This is caused by the light of the flash reflectingoff the inside of the eye.

Use this mode in backlit scenes, or to get the correctcolors when taking a picture under bright lighting.In this mode, the flash fires in bright as well as darkconditions.

MENU

DISP / BA CK

/O K

O P

E N

The flash settingchanges each time youpress d (q ).

AUTO Auto flash (not displayed)

b Red-eye reduction

Using this mode to minimize red-eye (eyesappear in red in the finished photo).

d Forced flash

d Setting the Flash Available Photography modes:a , H , . , 8 , s ( p.38, 39)

8/12/2019 a700 e Manual

42/132

42

This mode is suitable for situations where the flash cannotbe used.Use a tripod to prevent camera shake when shooting inSuppressed flash mode in the dark condition.Any time, flash does not fire.

This mode allows you to take pictures of people at nightthat clearly show both your subjects and the night timebackdrop. To prevent camera shake, always use a tripod.

Usingn synchronizes Red-eye reduction mode.

Using8 selects slow shutter speeds of up to 2 seconds.

CAUTION

In bright scenes, overexposure may occur.

CHECK List of available flash modes in each Photography

modeThe following table shows the flash modes available foreach Photography mode.

Effective flash range ( S : AUTO)Wide-angle: approx. 50 cm to 3.8 m (1.6 ft. to 12.5 ft.)Telephoto: approx. 60 cm to 2 m (2.0 ft. to 6.6 ft.)If you take pictures outside of the effective flash range,the image may appear dark even if the flash is used.

CAUTION

If pressing the shutter button while the flash is charging(Indicator lamp blinking orange), the picture will be

taken without the flash (when using AUTO orb

). The flash charging time may increase when thebatteries are low on charge.

When taking a picture using the flash, the image maydisappear and go dark briefly due to flash charging. TheIndicator lamp blinks orange during charging.

The flash fires several times (pre-flashes and the mainflash). Do not move the camera until the picture istaken.

Suppressed flash

c Slow synchro,n Red-eye reduction + Slow synchro

AUTO b d C c na

H

,

.

8

s

Photography Menu Operation

8/12/2019 a700 e Manual

43/132

43


Use the Photography menu to adjust image quality. Youcan take pictures in a wide range of conditions.

Setting the menus

A Press MENU/OK to open the

menu.B Press p or q to select the

menu.

C Press n or o to change thesetting.


SELF-TIMER

OFF

Photography Menu Operation Setting the menus ( p.43)

8/12/2019 a700 e Manual

44/132

44

Z List of photography menu options

Page Menu Functions Settings Factorydefault

1

q SHOOTINGMODE ( p.38)

Use this setting to provide the best photography menusetting for the scene being shot.

r MOVIE /q MANUAL /q AUTO/H PORTRAIT /, LANDSCAPE /. SPORT /8 NIGHT

q AUTO

y QUALITY ( p.45)

This setting can be used with any of the modes.Specifies the image size.The larger image size, the better image quality is obtained.The smaller image size, the larger number of images arerecorded.

F / N /% / 4 / 2 /` N

* SELF-TIMER( p.46)

This setting can be used with any of the modes.Used in situations such as group shots where thephotographer is included in the shot.

OFF / * (10 seconds) /( (2 seconds) OFF

U OPTION ( p.68) Use this setting to change the camera settings. SET-UP /j LCD

2

S ISO ( p.48)

This setting can be used with any of the modes.Specifies required sensitivity setting of the ambient lightaround the subject.The larger value of the sensitivity, the higher sensitivity isobtained. The higher sensitivity settings will allow you totake pictures in darker locations.

AUTO / 100 / 200 / 400 AUTO

S EV ( p.49)This setting can be used when the Photography mode setsto q MANUAL (s ).Use this setting to obtain the correct exposure.

2 EV to +2 EV

(1/3 EV increments)0

T WB ( p.50)This setting can be used when the Photography mode setsto q MANUAL (s ).Use this setting to adjust the color balance to suit the colorof the ambient light around the subject.

AUTO /6 / 7 / 9 / 0 /- / 8 AUTO

Setting the menus ( p.43)

8/12/2019 a700 e Manual

45/132

45


Selecting quality setting(y QUALITY)Available Photography modes:a , H , , , . , 8 , s ( p.38, 39)

Use this menu to specify the image size.Select the quality setting for the scene being shot.

Z Quality settings in Photography mode

MEMO The bigger the number of recorded pixels, the better the

image quality becomes. As the number of recordedpixels becomes smaller, you will be able to record moreframes to an xD-Picture Card .

The quality setting is retained even when the camera isturned off or the mode setting is changed.

When changing the quality setting, the number ofavailable frames also changes ( p.117). The numbersto the right of setting show the number of availableframes.

CAUTION

If F is selected for the quality setting, image recordingtime and time required between shots increases.

Area shot and quality setting

Normal shooting provides an aspect ratio of 4:3 and% shooting provides an aspect ratio of 3:2 (same aspect ratio as35 mm film and post card).

Quality mode Sample uses

F (3072 2304) N (3072 2304)

Printing at up to 10R (25.4 30.5 cm/ 10 12 in.) / A4 sizeFor better quality, select F% (3264 2176)

4 (2304 1728) Printing at up to 6R (15.2 20.3 cm/ 6 8 in.) / A5 size

2 (1600 1200) Printing at up to 4R (10.2 15.2 cm/ 4 6 in.) / A6 size

` (640 480) To use for e-mail or web site

QUALITY4

815

8 FRAMES

6

Area shot excluding % 6

Area shot with %


f


8/12/2019 a700 e Manual

46/132

46

Taking pictures using self-timer(* SELF-TIMER)Available Photography modes:a , H , , , . , 8 , s ( p.38, 39)

Use this menu in situations where the photographer isincluded in the shot.

When selecting the self-timer setting, the self-timer iconappears on the LCD monitor.

* : The picture is taken after 10 seconds.( : The picture is taken after 2 seconds.

1 Press the shutter button down halfway tofocus on the subject and press the shutterbutton fully.

Pressing the shutter button down halfway that focuseson the subject.Without releasing the shutter button, press the buttonall the way down (fully pressed) to start the self-timer.

SELF-TIMER

OFF

Doublebeep Beep

Halfway pressed Fully pressed


8/12/2019 a700 e Manual

47/132

47


2 Take pictures in selected time. Using the 2-second self-timer This is useful when you worry about camera shake even ifattaching the camera on a tripod.

MEMO To stop the self-timer, once it has started running, press

DISP/BACK. Any of the following cancels the self-timer setting:

- Completing the shooting- Changing the Photography mode setting- Setting the camera to Playback mode- Turning the camera off

Take care not to stand in front of the lens when pressing

the shutter button as this can prevent the correct focusor brightness (exposure) from being achieved.

8

A countdown appears onthe LCD monitor indicatingthe time remaining until thepicture is taken.

A picture is taken after the self-timer lamp changesfrom lit to blinking (only blinks with the 2-second self-timer).


S if i g iti it tti g MEMO


8/12/2019 a700 e Manual

48/132

48

Specifying sensitivity setting(S ISO)Available Photography modes:a , H , , , . , 8 , s ( p.38, 39)

Use this menu to specify required sensitivity setting of theambient light around the subject.The larger value of the sensitivity, the higher sensitivity isobtained. The higher sensitivity settings will allow you totake pictures in darker locations.

CHECK Settings

AUTO/100/200/400Selecting AUTO as the sensitivity setting, the cameraselects the best sensitivity setting for the subjectsbrightness.

The selected sensitivitysetting appears on the LCDmonitor when the sensitivitysetting is set to anothersetting excluding AUTO.

MEMOSensitivity is retained even when the camera is turned offor the mode setting is changed.

CAUTION

Although higher sensitivity settings will allow you to takepictures in darker locations, they will also increase theamount of speckling in your images. Choose thesensitivity setting that best suits the conditions.

400200100

ISO

AUTO

ISO 400 6

Adjusting exposure


8/12/2019 a700 e Manual

49/132

49


Adjusting exposurecompensation ( S EV)Available Photography mode:s ( p.38,39)

Use this menu for shots to get the correct brightness(exposure), such as shots with extremely high contrastbetween the subject and the background.

CHECK Compensation range: 2 EV to +2 EV

(13 steps in 1/3 EV increments) Explanation of Terms EV ( p.118)

Guide to compensation Backlit portraits:

+2/3 EV to +1 2/3 EV

Very bright scenes (such assnowfields) and highly reflectivesubjects: +1 EV

Shots made up predominantly of sky: +1 EV Spotlit subjects, particularly against dark backgrounds: 2/3

EV Scenes with low reflectivity, such as shots of pine trees or

dark foliage: 2/3 EV

MEMO

Any of the following disables exposurecompensation: Using the flash in AUTO orb mode Shooting dark scenes ind mode

23

13

13

EV+ / + /

- / 0

positive (+) compensation

negative () compensation


Adjusting color balance After taking the picture, check the image color (white


8/12/2019 a700 e Manual

50/132

50

Adjusting color balance(T WB)Available Photography mode:s ( p.38,39)

Adjust the color balance based on white to suit the colorof the ambient light around the subject.

AUTO: Automatic adjustment6 : Shooting outdoors in good weather7 : Shooting in shade9 : Shooting under Daylight fluorescent lamps0 : Shooting under Warm White fluorescent lamps- : Shooting under Cool White fluorescent lamps8 : Shooting in incandescent light

MEMO In AUTO mode, the correct white balance may not be

achieved for subjects such as close-ups of peoplesfaces and pictures taken under a special light source.Select the correct white balance for the light source.

When the flash fires, the white balance setting for theflash is used. Consequently, to achieve a particulareffect, the flash mode should be set toC Suppressedflash ( p.42).

The color tones may vary depending on the shootingconditions (light source, etc.).

After taking the picture, check the image color (whitebalance).

Explanation of Terms White Balance ( p.119).

WB

AUTO

Using Playback Menu

Use this menu to playback photographed images.

8/12/2019 a700 e Manual

51/132

51

A d v a n c e d F e a t

u r e s P l a y b a c k

Setting the menus DPOF set frame ( u DPOF)You can specify the image, number of prints, with orwithout date of printing with a DPOF-compatible printer.

Selecting WITH DATEE , E appears on the LCDmonitor and the date will be imprinted on your prints.

Continued Q

p y p g p g

A Set the camera to Playbackmode ( p.31).

B Press MENU/OK to open themenu.

C Press p or q to select themenu.

D Press n or o to change thesetting.

E Press MENU/OK to confirm thesetting.

RESET ALLWITHOUT DATEWITH DATE

DPOF WITH DATEE : The date will be imprinted on yourprints.

WITHOUT DATE : The date will not be imprinted onyour prints.

RESET ALL : All DPOF settings will be canceled.

WITH DATE / WITHOUT DATE

DPOF :

SHEETS

100-000100009

01

FRAMESET

Total number of prints

Setting for that frame

51

A d v a n c e d F e a t

u r e s P l a y b a c k

Using Playback Menu

MEMO Canceling DPOF settingA Press p or q to display the


8/12/2019 a700 e Manual

52/132

52

g gA Press MENU/OK to open the Playback menu.B Press p or q to select u DPOF.C Press n oro to select WITH DATEE or WITHOUT

DATE and press MENU/OK.D Press p or q to select the frame (file) with the DPOF

setting you want to cancel.E Press o to set the number of prints to 0 (zero).

To cancel the DPOF setting for another frame (file),repeat steps D and E .Always press MENU/OK to complete the settings. DPOF ALL RESET ( p.53)

MEMO When DPOF settings were specified on another

camera.

When the data includes a frame (file) with DPOFsettings that were specified on another camera,RESET DPOF OK? appears.Pressing MENU/OK erases all of the DPOF settingsalready specified for each frame (file). Specify theDPOF setting for each frame (file) again.

Prints of up to 999 frames (files) can be ordered on thesame xD-Picture Card .

DPOF settings cannot be specified for movies.

A Press p or q to display theframe (file) for specifying DPOFsetting.

B Press n or o to set a value.Up to 99 sheets are printed.For frames (files) that you do notwant printed, set the number ofprints to 0 (zero).

To specify more DPOF settings, repeat stepsA and B .C Always press MENU/OK after the

settings are completed.Pressing DISP/BACK cancelsthose settings.

RESET DPOF OK?

100-0001

YES NO

CAUTION Z u How to specify print options (DPOF)


8/12/2019 a700 e Manual

53/132

53

A d v a n c e d F e a t u r e s P l a y b a c k

Pressing DISP/BACK while choosing settings willcancel all current settings. If there were previous DPOFsettings, only the modifications are canceled.

When selecting the WITH DATE setting, the date isimprinted on your shots using the Print Service or aDPOF-compatible printer (depending on the printerspecifications, the date may not be printed in somecases).

Images photographed with a camera other than FinePixA700 may not be specified DPOF settings.

To cancel all DPOF settings:

Select RESET ALL in the Playback menu ( p.51).

MEMO

u appears on the LCD monitor during playback when theimage has specified DPOF settings.

RESET ALL

Press MENU/OK.

RESET DPOF OK?

100-0001

YES CANCEL

100-0001

10:00 AM9/24/2006

DPOF stands for Digital Print Order Formatand refers to a format that is used forrecording printing specifications for imagesshot using a digital camera on media such asan xD-Picture Card . The recordedspecifications include information on whichframes are to be printed.

This section gives a detailed description of how to orderyour prints with FinePix A700.

* Some printers do not support date and time imprintingor specification of the number of prints.

* The warnings shown below may appear while

specifying the prints.

DPOF SPECIFIED. ERASE OK ?DPOF SPECIFIED. ERASE ALL OK ? ( p.35)When erasing the image, the DPOF setting for thatimage is deleted at the same time.

RESET DPOF OK ? ( p.52)When inserting anxD-Picture Card that containsimages specified for printing by another camera,

those print specifications are all reset and replaced bythe new print specifications.

[DPOF FILE ERROR] ( p.106)Up to 999 images can be specified on the samexD-Picture Card .

8/12/2019 a700 e Manual

54/132

To stop the procedure midway Automatic Playback


8/12/2019 a700 e Manual

55/132

55


If the images are very large, protecting or unprotecting allthe frames (files) may take some time.If you want to take a picture or record a movie during theprocedure, press DISP/BACK.

CAUTION

The Format function erases all the frames (files),including protected frames (files) ( p.73).

y(g PLAYBACK)

Use this mode to play back photographed imagescontinuously. You can select playback interval and type ofimage transition.

MEMO

To interruptg PLAYBACK, pressn or MENU/OK. Press p or q to advance or go back through the

images. The Auto power off function ( p.73) does not operate

during playback. Movie starts automatically. When the movie ends, the

playback function moves it on. Press DISP/BACK once during playback to display the

frame number and on-screen help.

100-0001

CANCEL

SET ALL

PLAYBACK

Using Playback Menu

Copying the images ( V COPY) Copying one frame at a time (FRAME)


8/12/2019 a700 e Manual

56/132

56

It is possible to transfer saved images between theinternal memory and anxD-Picture Card . Your cameracalls images frames.

Z Selecting COPY

MEMOTo copy another frame (file), repeat stepsC and D .When copying frames (files) is completed, press DISP/ BACK.

A Press n or o to selectW INTERNAL MEMORY CARD orX CARD INTERNAL MEMORY.

B Press MENU/OK to confirm thesetting.

COPYINTERNAL MEMORY

CARD

NEXT CANCEL

Copying one frame at a time (FRAME)

A Press n or o to select FRAME.

B Press MENU/OK.

C Press p or q to select thecopying frame (file).

D Press MENU/OK to copy thecurrently displayed frame (file).

COPYINTERNAL MEMORY

CARD

YES CANCEL

ALL FRAMESFRAME

YES CANCEL

100-0001

COPY OK?

Recording voice memosCopying all frames (ALL FRAMES)


8/12/2019 a700 e Manual

57/132

57


CAUTION When [\ MEMORY FULL] or [Y MEMORY FULL]

appears on the LCD monitor, exchanging the data stopson the way.

When copying the image that has specified DPOFsetting, the DPOF setting is not copied.

(# VOICE MEMO)Voice memos of up to 30 seconds can be added to stillimages.

1 Set the menu.

Continued Q

py g ( )

A Press n or o to select ALLFRAMES.

B Press MENU/OK.

C Press MENU/OK to copy all theframes (files).

COPYINTERNAL MEMORY

CARD

YES CANCEL

FRAMEALL FRAMES

YES CANCEL

100-0001

A WHILE

COPY ALL OK?IT M AY TAKE

A Press p or q to select theimage to add a voice memo.

B Press MENU/OK to open thePlayback menu.

C Press p or q to select # VOICE MEMO.

D Press MENU/OK.

ON

VOICE MEMO

Using Playback Menu

2 Start recording the voice memos. 3 Camera operation while recording.


8/12/2019 a700 e Manual

58/132

58

The remaining recording time appears during recordingand the self-timer lamp blinks.Press MENU/OK to start recording.

STANDBYVOICE MEMO

S TA RT C AN CE L

Face the microphone on the frontof the camera to record yourcomment.Hold the camera about 20 cm(7.9 in.) away for the best results.

Microphone

VOICE MEMO

REC RE-REC

REC

Remaining timeBlinking red

When the time remainingreaches 5 seconds, theself-timer lamp starts

blinking quickly.

4 Ending voice memos. Playing back voice memo


8/12/2019 a700 e Manual

59/132

59


The voice memo ends when pressing MENU/OK midwayor 30 seconds pass.

To record your comment: press MENU/OK.To rerecorded the comment: press DISP/BACK .

MEMO When the image already has a voice memo

If you select an image that already has a voice memo,a screen appears in which you can select whether torerecord the memo.

When [PROTECTED FRAME] appears, unprotect theframe ( p.54).

Voice memos cannot be added to movies. Continued Q

VOICE MEMO

REC RE-REC

FINISH

VOICE MEMO

RE-REC

A Press p or q to select animage file with a voice memo.# appears on the LCD monitor.

B Press o to start playing back

voice memo.The playback time appears onthe LCD monitor along with aprogress bar.

PLAY

STOP PAUSE

Progress bar

Using Playback Menu

Z Playing back voice memos CAUTION

l


8/12/2019 a700 e Manual

60/132

60

CHECK Audio recording format:

WAVE ( p.118) PCM recording format Audio file size:

Approx. 480 KB (for a 30-second voice memo)

Playing voice memo filesYou may not be able to play back some voice memo filesrecorded on other cameras.

Control Description

PlaybackPlayback begins.The voice memo stops whenplayback ends.

Pause /Resume

Pauses the voice memo duringplayback. Press o again toresume playback.

Stop

Stops playback.Press p or q while voicememo playback is stopped to goback to the previous file oradvance to the next filerespectively.

Fastforward /Rewind

Press p or q during playbackto skip forwards or backwardsthrough the voice memo. Thesebuttons do not function whileplayback is paused.

Uncover the speaker.The sound may bedifficult to hear.

Speaker

Trimming ( Y TRIMMING) 2 Specify trimming part of image.


8/12/2019 a700 e Manual

61/132

61


Use this mode to trim the required part of thephotographed image.

1 Select the menu.

MEMOPress DISP/BACK to return to single-frame playback.A Press p or q to select thetrimming frame (file).

B Press MENU/OK to open thePlayback menu.

C Press p or q to select Y TRIMMING.

D Press MENU/OK.

TRIMMING

SET

B Press p or q to move to

another part of the image.C Press n , o , p , orq to display

another part of the image.

MEMOPress DISP/BACK to return to the zoom setting.

D Press MENU/OK.

PANNINGYES CANCEL

TRIMMING

PANNINGYES CANCEL

TRIMMING

switch switch

A Press [ (n ) or ] (o ) tozoom in or out on an image.

Zoom bar

YES CANCEL

TRIMMING Navigation screen(Current displayed image)

Continued Q

Using Playback Menu

3 Record the image.


8/12/2019 a700 e Manual

62/132

62

MEMO A saved image size varies depending on the zoom

scale of step 2 . For 0.3 M,k YES option appears inyellow.

Image sizes

When% quality setting is selected, the image istrimmed to normal size (4:3 aspect ratio).

CAUTION

You may not be able to trim images that were shot with acamera other than FinePix A700.

Check the saved image size andpress MENU/OK.The trimmed image is added as aseparate file in the final frame.

TRIMMING

REC CANCEL

0. 3 MREC OK?

4 Printing at up to 6R (15.2 20.3 cm/6 8 in.) /A5 size

2 Printing at up to 4R (10.2 15.2 cm/4 6 in.) /A6 size

` To use for e-mail or web site

r Recording MoviesUse this mode to record movies with sound. Z Zooming the image

You must zoom beforehand as you cannot zoom during

8/12/2019 a700 e Manual

63/132

63

A d v a n c e d F e a t u r e s M

o v i e

1 Set the camera to r Movie mode.y g

recording.

CHECK Optical zoom focal length

Approx. 36 mm to 108 mm (35 mm camera equivalent)Max. zoom scale: 3

Focal rangeApprox. 50 cm (1.6 ft.) to infinity

Continued Q


B Press p or q to select q SHOOTING MODE.

C Press n or o to select r MOVIE.


SHOOTING MODE

MANUALMOVIE

AUTOPORTRAIT

12s

STANDBY

The available recording timeappears on the LCDmonitor.

12s

STANDBY

Zoom bar

Press [ (n ) or ] (o ) to zoomin or out on an image.

63


o v i e

r Recording Movies

2 Record movies. MEMO The brightness and color of the LCD monitor shown

8/12/2019 a700 e Manual

64/132

64

Press the shutter button down fully to start recording.During recording,l REC and a counter that shows theremaining time appear on the LCD monitor.

MEMO

There is no need to hold down the shutter button duringrecording.

Recording movies Specifications: Motion JPEG ( p.118) with monaural

sound Quality selection method:$ (320 240 pixels)

# (160 120 pixels) Frame rate ( p.118): 10 frames per second (fixed)

gduring movie recording may differ from those shownbefore recording begins.

Pressing the shutter button down fully fixes the focus,however the exposure and white balance are adjusted

to the scene being shot. If recording is stopped immediately after it begins, 1second of the movie is recorded onto thexD-PictureCard or internal memory.

CAUTION

Because a movie is recorded onto thexD-Picture Card or internal memory as it is saved, it cannot be recordedcorrectly if the camera suddenly loses power (if thebatteries run out or the AC power adapter is

disconnected). A movie file taken by FinePix A700 may not be playableon other cameras.

Because sound is recorded concurrently with theimages, make sure that you do not cover themicrophone with a finger, etc. ( p.12).

Camera operation noises may be recorded duringmovie shooting.

12sREC

Fully pressed

Recording ends when pressingthe shutter button downhalfway during recording or theremaining time runs out.

Halfway pressed

Changing movie size CAUTIONIf you shoot using thexD-Picture Card s with model

b h

8/12/2019 a700 e Manual

65/132

65


o v i e Z Quality settings in Movie mode$ (320 240 pixels): For better quality# (160 120 pixels): To record longer movies

MEMO The quality setting is retained even when the camera is

turned off or the mode setting is changed. The available recording time for a movie may decrease

depending on the free space on the xD-Picture Card . See p.117 for information on standard number of

available recording time.

numbers containing M such as DPC-M2GB, movierecording time may be reduced if you repeatedly recordand erase (frame erase) image files.In such a case, erase all frames or format thexD-Picture

Card before use. Back up important frames (files) ontoyour PC or another media.


B Press p or q to select the y QUALITY setting.

C Pressn

oro

to change thesetting.


3 20 2 401 60 1 20

QUALITY

w Playing Back Movies Setting the camerato w Playback mode ( p.31)

Fast Press p or q during playbackControl Description

8/12/2019 a700 e Manual

66/132

66

Z Playing back movies

MEMOIf the subject of the shot is very bright, white verticalstreaks or black horizontal streaks may appear in theimage during playback. This is normal.

CAUTION You may not be able to play back some movie files

recorded on other cameras. To play back movie files on a PC, save the movie file on

the xD-Picture Card or internal memory to the PCshard disk and then play back the saved file.

Uncover the speaker. The sound is difficult to hear.

A Press p or q to select themovie file.r appears on theLCD monitor.

B Press o to begin playing backmovie.

Control Description

PlaybackPlayback begins.Playback stops when the end ofthe movie is reached.

Pause /Resume

Pauses the movie duringplayback.Press o again to resumeplayback.

Stop

Stops playback.Press p or q while playbackis stopped to go back to theprevious file or advance to the

next file respectively.

PLAY

30 s

PAUSESTOP

The playback time appears on

the LCD monitor along with aprogress bar.

Progress bar

Fastforward /Rewind

Press p or q during playbackto skip forwards or backwardsthrough the movie.

Skipplayback

Press p orq when the movie

is paused, the movie advancesor goes back one frame.Hold downp or q to movethrough the frames quickly.

Adjusting LCD Brightness or Playback Volume

MEMOThe options available in theU menu vary depending onwhether the mode is selected

OPTION

8/12/2019 a700 e Manual

67/132

67

S e t t i n g s

whether the mode is selected. Photography mode

Movie mode

Playback mode



C Press n or o to select j LCDor VOLUME.

D Press MENU/OK to display thesetting display.

E Press p orq to adjust the LCDmonitor brightness or playbackvolume.

F Press MENU/OK to confirm thesetting.

LCDSET-UP

VOLUME

SET CANCEL

BRIGHTNESS

OPTION

LCDSET-UP

LCDSET-UP

OPTION

OPTION

LCDSET-UP

VOLUME

67

S e t t i n g s

U SET-UP

Using the SET-UP menu

12 Change the setting.

8/12/2019 a700 e Manual

68/132

68

1 Open the SET-UP menu.



C Press n or o to select SET-UP.

D Press MENU/OK to display theSET-UP menu.

OPTION

LCDSET-UP

A Press p or q to move tooptions 1 to 4.

B Press n or o to select a menuoption.

C Press p or q to change thesetting.When selecting FORMAT,DATE/TIME, TIMEDIFFERENCE, , USBMODE, DISCHARGE, orRESET, press q to specify eachsetting.


SET-UP

IMAGE DISP.

FRAME NO.BEEP VOLUME

2 31 4 :ON

SHUTTER VOL :LOW

:CONT. :LOW

SET CANCEL

SET-UP menu option

S tti g Di l F t d f lt E l ti P g

How to use the SET-UP menu ( p.68)

8/12/2019 a700 e Manual

69/132

69

S e t t i n g s

Setting Display Factory default Explanation Page

1

IMAGE DISP. ON/OFF ON

Specifies whether an image checking screen(photography result) appears after taking a picture.The image is displayed for a few moments and thenrecorded. The color tones in images recorded maydiffer from actual color. Play back the recordedimages to check them.

SHUTTER VOL LOW/HIGH/OFF LOW Sets the volume of the sound emitted when theshutter operates.

BEEP VOLUME LOW/HIGH/OFF LOW Sets the volume of the tone emitted when thecamera controls are used.

FRAME NO. CONT./RENEW CONT.Specifies whether frame numbers are assignedconsecutively from previous numbers or beginagain.

71

2

DIGITAL ZOOM ON/OFF OFF Specifies whether digital zoom is used together. 72

AUTO POWER OFF 2 MIN/5 MIN/OFF 2 MIN Sets the time of turning camera off when camera isnot used. 73

LCD POWER SAVE ON/OFF ON Darkens the LCD monitor when camera is not used. 73

FORMAT OK Initializes anxD-Picture Card or internal memory.Select this menu to erase all the frames (files). 73

Continued Q

U SET-UP

DATE/TIME SET Corrects the date or time. 22Setting Display Factory default Explanation Page


8/12/2019 a700 e Manual

70/132

70

3

TIME DIFFERENCE SET Specifies the time difference settings. 74

SET Specifies the language used for LCD monitordisplay. 23

USB MODE SET

@ DSCProvides a simple way to read images from anxD-Picture Card or internal memory and store imagesonto an xD-Picture Card .

88

< PICTBRIDGEWhen a printer that supports PictBridge is available,images can be printed by connecting the cameradirectly to the PictBridge-compatible printer withouta PC.

77

4

VIDEO SYSTEM NTSC/PAL Specifies whether video output is set to NTSC orPAL.

DISCHARGE OK Discharges Ni-MH batteries. 100

RESET OK

Resets all the camera settings (other than theDATE/TIME, TIME DIFFERENCE, ,and VIDEO SYSTEM) to the factory default valuesset at shipment. A confirmation message appearswhen you press q . To reset the camera settings,press MENU/OK.

Use this function to specify whether frame numbers are

MEMO Setting this function to CONT. makes file management

easier as it makes sure that file names are not

FRAME NO.


8/12/2019 a700 e Manual

71/132

71

S e t t i n g s

p yassigned consecutively from previous numbers or beginagain.

CHECK

duplicated when images are downloaded to a PC. When the camera settings are RESET ( p.70), the

frame number setting (CONT. or RENEW) is changedto CONT. and the frame number itself does not return to0001.

In CONT. setting, images are stored beginning from thehighest file number on the currentxD-Picture Card when the xD-Picture Card already contains image fileswith file numbers higher than the highest file number onthe last xD-Picture Card .

File number runs from 0001 to 9999. Once 9999 isexceeded, the directory number changes from 100 to101. The maximum number is 999-9999.

The displayed frame number may differ for images

photographed on other cameras.

* Formatted xD-Picture Card or internal memory usedfor both A and B.

CONT. : Pictures are stored beginning from the highestfile number stored on the lastxD-Picture Card or internal memory used.

RENEW: Pictures are stored on eachxD-Picture Card beginning with a file number 0001.

A

B

CONT. RENEW

100-0009

10:00 AM9/24/2006

File number

Frame number

Directory number

The last 4 digits of the 7-digit number in the top rightcorner of the LCD monitor are the file numbers, whilethe first 3 digits show the directory number.

U SET-UP

Use this function to shoot enlarged images than

CHECK Optical zoom focal length*

Approx. 36 mm to 108 mm

DIGITAL ZOOM


8/12/2019 a700 e Manual

72/132

72

g gmaximum optical zoom scale.

Z Zoom bar display

pp Digital zoom focal length*

Approx. 108 mm to 680 mm,max. zoom scale: approx. 6.3

Digital zoom focal length (% )*Approx. 108 mm to 583 mm,max. zoom scale: approx. 5.4

* 35 mm camera equivalents

MEMOWhen zooming changes between optical and digital, theposition of the indicator stops. Press the same Zoomswitch again to start the indicator moving again.

CAUTIONUsing the digital zoom allows you to enlarge your subjectand shoot it. However, it will lower your image quality. Setthe digital zoom when requiring it.

6

Zoom bar

Digital zoom OFF Digital zoom ON

Optical zoom: 3

Optical zoom: 3

*

Approx. 5.4 (Digital zoom) when they

QUALITY is set to% .

Digital zoom:approx. 6.3 *

When this function is active and the camera remainsd f ff

Initialize (format) thexD-Picture Card or internal memoryf h h

AUTO POWER OFF FORMAT


8/12/2019 a700 e Manual

73/132

73

S e t t i n g s

unused for 2 or 5 minutes, it turns camera off.Use this function when you want to get the maximumpossible running time from your batteries.

CAUTION

The Auto power off function is disabled during automaticplayback ( p.55), discharging rechargeable batteries( p.100), and when a USB connection ( p.78, 88) isbeing used.

To restore power to the cameraRefer to Turning On and Off ( p.19).

The LCD monitor darkens when camera is not used for 10seconds.When this function is active, you can save power and getthe maximum possible running time from your batteries.

MEMOPressing any button wakes the camera up.

CAUTION

The LCD power save function is disabled during Playbackmode and Movie mode.

for use with the camera.

CHECKInitializing internal memory takes about 15 seconds.

CAUTION

The Format function erases all the frames (files),including protected frames (files).

Back up important frames (files) onto your PC oranother media. Do not open the battery cover during formatting, as

formatting will be interrupted.

LCD POWER SAVE

A Press p or q to select OK.

B Pressing MENU/OK initializes

the xD-Picture Card or internalmemory.

FORMAT OK?

ERASE ALL DATA

CANCELOK

SET

FORMAT Place of initializeY FORMAT:Internal memory\ FORMAT:xD-Picture Card

U SET-UP

Use this function when traveling to destinations indiff i Thi f i i diff

2 Select TIME DIFFERENCE.TIME DIFFERENCETIME DIFFERENCE


8/12/2019 a700 e Manual

74/132

74

different time zones. This function sets a time differencerelative to the date and time currently set. When thissetting is enabled, the specified time difference is applied

when pictures are taken.1 Use Time difference function.

Press p or q to change betweenN HOME andI LOCAL.To set the time difference, selectI LOCAL.N HOME: Your home time zoneI LOCAL: Your destination time

zone

TIME DIFFERENCE

TIME DIFF SETLOCATION HOME

10:00 AM9/24/2006

SET CANCEL

A Press n or o to select TIMEDIFF.

B Press q .

LOCATION LOCAL

10:00 AM9/24/2006

SET CANCEL

TIME DIFF SET

3 Set time difference. CHECKUpon returning from a trip, always change the timedifference setting back toN HOME and then check thedate and time again


8/12/2019 a700 e Manual

75/132

75

S e t t i n g s

CHECKAvailable time setting23:45 to +23:45 (in 15-minute increments)

MEMO

date and time again.

A Press p or q to select +/,hour, and minute.

B Press n or o to change thesetting.

C Always press MENU/OK after thesettings are completed.

10:00 AM9/24/2006

SET CANCEL

TIME DIFFERENCE

+ 00 : 00

6

9/24/2006

In the time difference setting,when you change to thePhotography mode,I andthe date is displayed for 3seconds, the date displayturns yellow.

Connecting to a TVWhen connecting to a TV, images can be displayed on wider screen. Using Automatic playback function ( p.55) together, youcan have fun with folks.

8/12/2019 a700 e Manual

76/132

76

Plug the A/V cable (included) intothe A/V OUT (audio/visual

output) socket of the camera.

Plug the other end of the cable into theaudio/video input socket on the TV.

CAUTION

Plug the A/V cable (included) and the AC power adaptercorrectly and push them in each terminal.

See p.100 for the information of the AC power adapter.

MEMO When connecting the A/V cable to TV, the LCD monitor

is turned off. The image quality for movie playback is lower than for

still images. Refer to the instructions provided with your TV for more

information on audio/video input for your TV. Use the AC-3VX (sold separately) when FinePix A700

is connected to a TV for long periods.

AC-3VX(sold separately)

To video (yellow)

input socket

To audio (white)

A/V OUTsocket

76

Connecting Camera Directly to Printer PictBridge FunctionWhen a printer that supports PictBridge isavailable, images can be printed byconnecting the camera directly to thePictBridge-compatible printer without a

F Press p orq to move to option3.

8/12/2019 a700 e Manual

77/132

77

C a m e r a C o n n e c t i o n

g p pPC.

Before connecting to a printer

A Press w for about 1 second toturn the camera on in Playbackmode.

B Press MENU/OK to open themenu.

C Press p or q to select U OPTION.

D Press n or o to select SET-UP.

E Press MENU/OK to open theSET-UP menu.

OPTION

LCDVOLUME

SET-UP

G Press n or o to select USBMODE.

H Press q .

I Press n or o to select< PICTBRIDGE.

J Press MENU/OK to confirm thesetting.

K Press POWER to turn thecamera off.

USB MODETHIS MODE IS FORPRINTING WITHPICTBRIDGE PRINTER.

DSC

SET CANCEL

PICTBRIDGE

Connecting Camera Directly to Printer PictBridge Function

Connecting to a printerA Connect the camera to your printer using the USB

cable (mini-B).

B Connect the camera to a printer before turning theprinter on. Press w for about 1 second to turn thecamera on.

8/12/2019 a700 e Manual

78/132

78

cable (mini B).

MEMOUse the AC-3VX (sold separately) when FinePix A700 isconnected to a printer for long periods.

C The following screen appears on the LCD monitor aftera moment.

MEMO If the screen of stepC does not appear, check whether

the USB MODE setting is< PICTBRIDGE. Depending on the printer, some functions are disabled.

; USB socket (mini-B)

AC-3VX(sold separately)

CHECKING USB

USB CHECKING USBappears on the LCDmonitor.

TOTAL:

SHEETS

100-000100000

00

FRAMEOK SET

Specifying images forprinting p.79Printing with DPOF setting p.80

Specifying images for printing(PRINT WITH DATE / PRINTWITHOUT DATE)

TOTAL : 11 SHEETS

8/12/2019 a700 e Manual

79/132

79

C a m e r a C o n n e c t i o n

WITHOUT DATE)

MEMOEven if MENU/OK is pressed with to

a700 e manual

Documents