Revox A700 Operating InstructionsImportant notes, warranty, packing

ContentsOperating elementsTape transport, tape motion controlRecord controlsPlayback controlsBack panel and connector recessDescription of pushbuttons

1 - Introduction1.1 - Checks prior to first operation1.2 - Switching on1.3 - Selection of tape speed1.4 - Loading blank tape1.5 - Tape timer reset1.6 - Operating modes

2 - Audio mixer2.1 - Input connectors2.2 - Input selector2.3 - Input level faders2.4 - Record master fader2.5 - Record level metering

3 - Outputs3.1 - Outputs LINE A3.2 - Outputs LINE B3.3 - Outputs TO PWR AMP3.4 - Headphones outputs

4 - Playback monitoring4.1 - INPUT/TAPE monitor selector4.2 - STEREO/MONO mode selector4.3 - Tone controls4.4 - Playback VOLUME

5 - Recording5.1 - MONO recording5.2 - Stereo recording5.3 - RECORD button5.4 - Monitoring

6 - Playback7 - Automatic tape stop7.1 - Stop due to tape run-out7.2 - Stop at any preselected point7.3 - Automatic operation

8 - Special recording techniques8.1 - Duo play8.2 - Simultaneous recording8.3 - Multiplay recording8.4 - Stereo multiplay8.5 - Echo effects8.6 - Voice over music fades

9 - Tape editing10 - Remote control11 - Slide synchronization12 - External speed control13 - Maintenance14 - Handling and storage of tape15 - Technical annex15.1 - Technical specs15.2 - System hookup15.3 - System hookup15.4 - System hookup15.5 - Audio mixing section block diagram

Impressum