aabtlac0 - course.sdu.edu.cncourse.sdu.edu.cn/g2s/ewebeditor/uploadfile/20130529170733008.pdf ·...
TRANSCRIPT
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-01 a,b GieseckeEngineering Graphics, 8ECaption: Regular Views and Auxiliary Views.
AABTLAC0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-02 a-c GieseckeEngineering Graphics, 8ECaption: An Auxiliary View.
AABTLAD0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-03 1-4 GieseckeEngineering Graphics, 8ECaption: Drawing an Auxiliary View—Folding-Line Method.
AABTLAE0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-04 GieseckeEngineering Graphics, 8ECaption: Drawing Parallel or Perpendicular Lines.
AABTLAF0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-05 a-c GieseckeEngineering Graphics, 8ECaption: Position of the Reference Plane.
AABTLAG0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-06 a 1-5 GieseckeEngineering Graphics, 8ECaption: Drawing an Auxiliary View—Reference-Plane Method.
AABTLAH0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-07 a-c GieseckeEngineering Graphics, 8ECaption: Depth Auxiliary Views.
AABTLAI0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-08 a-c GieseckeEngineering Graphics, 8ECaption: Height Auxiliary Views.
AABTLAJ0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-09 a-c GieseckeEngineering Graphics, 8ECaption: Width Auxiliary Views.
AABTLAK0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-10 a,b GieseckeEngineering Graphics, 8ECaption: Revolving a Drawing.
AABTLAL0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-11 a-c GieseckeEngineering Graphics, 8ECaption: Dihedral Angles.
AABTLAM0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-12 a,b GieseckeEngineering Graphics, 8ECaption: Plotted Curves.
AABTLAN0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-13 a,b GieseckeEngineering Graphics, 8ECaption: Reverse Construction.
AABTLAO0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-14 a-c GieseckeEngineering Graphics, 8ECaption: Primary Auxiliary Views.
AABTLAP0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-15 a-c GieseckeEngineering Graphics, 8ECaption: Partial Views.
AABTLAQ0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-16 GieseckeEngineering Graphics, 8ECaption: Half Views.
AABTLAR0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-17 a-c GieseckeEngineering Graphics, 8ECaption: Auxiliary Sections.
AABTLAS0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-18 GieseckeEngineering Graphics, 8ECaption: Auxiliary Section.
AABTLAT0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-19 GieseckeEngineering Graphics, 8ECaption: Auxiliary Section.
AABTLAU0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-20 GieseckeEngineering Graphics, 8ECaption: True Length of a Line by Means of an Auxiliary View.
AABTLAV0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-21 GieseckeEngineering Graphics, 8ECaption: Successive Auxiliary Views.
AABTLAW0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-22 1-3 GieseckeEngineering Graphics, 8ECaption: True Size of Oblique Surface—Folding-Line Method.
AACXFIK0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-23 a,b GieseckeEngineering Graphics, 8ECaption: True Size of an Oblique Surface—Reference-Plane Method.
AABTLAY0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-24 GieseckeEngineering Graphics, 8ECaption: Secondary Auxiliary View with Oblique Direction of Sight Given.
AABTLAZ0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-25 GieseckeEngineering Graphics, 8ECaption: Secondary Auxiliary View—Partial Views.
AABTLBA0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-26 a,b GieseckeEngineering Graphics, 8ECaption: Ellipses.
AABTLBB0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-27 GieseckeEngineering Graphics, 8ECaption: "RH Finger. Given: Front and auxiliary views. Required: Complete front, auxiliary, left-side, and top views (Layout A–3 or A4–3 adjusted). "
AABTLBC0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-28 GieseckeEngineering Graphics, 8ECaption: "V-Block. Given: Front and auxiliary views. Required: Complete front, top, and auxiliary views (Layout A–3 or A4–3 adjusted). "
AABTLBD0
1 2 3 4 5 6
7 8 9 10 11
12
13 1415 16
1817
19 20 21 22 23 24
25 26 2728 29
30
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-29 1-30 GieseckeEngineering Graphics, 8ECaption: "Auxiliary View Problems. Make freehand sketch or instrument drawing of selected problem as assigned. Draw given front and right-side views, and add incompleteauxiliary view, including all hidden lines (Layout A–3 or A4–3 adjusted). If assigned, design your own right-side view consistent with given front view, and then add com-plete auxiliary view. "
AACXFIL0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-30 GieseckeEngineering Graphics, 8ECaption: Anchor Bracket. Draw necessary views or partial views (Layout A–3 or A4–3 adjusted).
AACXFIM0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-31 GieseckeEngineering Graphics, 8ECaption: "Centering Block. Draw complete front, top, and right-side views, plus indicated auxiliary views (Layout B–3 or A3–3). "
AABTLBG0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-32 GieseckeEngineering Graphics, 8ECaption: Clamp Slide. Draw necessary views completely (Layout B–3 or A3–3).
AABTLBH0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-33 GieseckeEngineering Graphics, 8ECaption: Anchor Bracket. Draw necessary views or partial views (Layout A–3 or A4–3 adjusted).
AABTLBI0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-34 GieseckeEngineering Graphics, 8ECaption: "Centering Block. Draw complete front, top, and right-side views, plus indicated auxiliary views (Layout B–3 or A3–3). "
AACXFIN0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-35 GieseckeEngineering Graphics, 8ECaption: Clamp Slide. Draw necessary views completely (Layout B–3 or A3–3).
AABTLBK0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-36 GieseckeEngineering Graphics, 8ECaption: "Rod Guide. Draw necessary views, including complete auxiliary view showing true shape of upper rounded portion (Layout B–4 or A3–4 adjusted). "
AABTLBL0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-37 GieseckeEngineering Graphics, 8ECaption: "Brace Anchor. Draw necessary views, including partial auxiliary view showing true shape of cylindrical portion (Layout B–4 or A3–4 adjusted). "
AABTLBM0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-38 GieseckeEngineering Graphics, 8ECaption: "45° Elbow. Draw necessary views, including a broken section and two half views of flanges (Layout B–4 or A3–4 adjusted). "
AABTLBN0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-39 GieseckeEngineering Graphics, 8ECaption: "Angle Guide. Draw necessary views, including a partial auxiliary view of cylindrical recess (Layout B–4 or A3–4 adjusted). "
AABTLBO0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-40 GieseckeEngineering Graphics, 8ECaption: Holder Block. Draw front and right-side views ( apart) and complete auxiliary view of entire object showing true shape of surface A and all hidden lines (LayoutA–3 or A4–3 adjusted).
AABTLBP0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-41 GieseckeEngineering Graphics, 8ECaption: "Control Bracket. Draw necessary views, including partial auxiliary views and regular views (Layout C–4 or A2–4). "
AABTLBQ0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-42 GieseckeEngineering Graphics, 8ECaption: "Tool Holder Slide. Draw given views, and add complete auxiliary view showing true curvature of slot on bottom (Layout B–4 or A3–4 adjusted). "
AABTLBR0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-43 GieseckeEngineering Graphics, 8ECaption: "Adjuster Block. Draw necessary views, including complete auxiliary view showing true shape of inclined surface (Layout B–4 or A3–4 adjusted). "
AACXFIO0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-44 GieseckeEngineering Graphics, 8ECaption: "Tool Holder Slide. Draw given views, and add complete auxiliary view showing true curvature of slot on bottom (Layout B–4 or A3–4 adjusted). "
AABTLBT0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-45 GieseckeEngineering Graphics, 8ECaption: "Adjuster Block. Draw necessary views, including complete auxiliary view showing true shape of inclined surface (Layout B–4 or A3–4 adjusted). "
AABTLBU0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-46 GieseckeEngineering Graphics, 8ECaption: Brake Control Lever. Draw necessary views and partial views (Layout B–4 or A3–4 adjusted).
AABTLBV0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-47 GieseckeEngineering Graphics, 8ECaption: "Shifter Fork. Draw necessary views, including partial auxiliary view showing true shape of inclined arm (Layout B–4 or A3–4 adjusted). "
AABTLBW0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-48 GieseckeEngineering Graphics, 8ECaption: Cam Bracket. Draw necessary views or partial views as needed. (Layout B–4 or A3–4 adjusted).
AACXFIP0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-49 GieseckeEngineering Graphics, 8ECaption: "RH Tool Holder. Draw necessary views, including partial auxiliary views showing 105° angle and square hole true size. (Layout B–4 or A3–4 adjusted). "
AABTLBY0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-50 GieseckeEngineering Graphics, 8ECaption: "Draw secondary auxiliary views, complete, which (except Prob. 2) will show the true sizes of the inclined surfaces. In Prob. 2 draw secondary auxiliary view asseen in direction of arrow (Layout B–3 or A3–3). "
AABTLBZ0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-51 GieseckeEngineering Graphics, 8ECaption: Control Bracket. Draw necessary views including primary and secondary auxiliary views so that the latter shows true shape of oblique surface A (Layout B–4 orA3–4 adjusted).
AABTLCA0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-52 GieseckeEngineering Graphics, 8ECaption: Holder Block. Draw given views and primary and secondary auxiliary views so that the latter shows true shape of oblique surface (Layout B–4 or A3–4 adjusted).
AACXFIQ0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-53 GieseckeEngineering Graphics, 8ECaption: "Dovetail Slide. Draw complete given views and auxiliary views, including view showing true size of surface 1–2–3–4 (Layout B–4 or A3–4 adjusted). "
AABTLCC0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-54 GieseckeEngineering Graphics, 8ECaption: Dovetail Guide. Draw given views plus complete auxiliary views as indicated (Layout B–4 or A3–4 adjusted).
AABTLCD0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-55 GieseckeEngineering Graphics, 8ECaption:
AABTLCE0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-56 GieseckeEngineering Graphics, 8ECaption: Adjustable Stop. Draw complete front and auxiliary views plus partial right-side view. Show all hidden lines (Layout C–4 or A2–4).
AABTLCF0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-57 GieseckeEngineering Graphics, 8ECaption: Box Tool Holder for Turret Lathe. Given: Front and right-side views. Required: Front and left-side views and complete auxiliary view as indicated by arrow (LayoutC–4 or A2–4).
AABTLCG0
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-58 GieseckeEngineering Graphics, 8ECaption: Pointing Tool Holder for Automatic Screw Machine. Given: Front and right-side views. Required: Front view and three partial auxiliary views (Layout C–4 orA2–4).
AABTLCH0
R 1.25R 1.00
2xR.875 2xØ.875
Ø 1.25
4.00
2.75
5.50
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-59 GieseckeEngineering Graphics, 8ECaption: "Print Roller. Given: Right-side view. Design your own front and auxiliary view (Use Layout A–3 or A4–3 adjusted). If assigned, use CAD to create a partial auxil-iary view."
AACXFIR0
FRON
T VIEW
45°
.38
R.75TYP.
2.5
1.0
2X:.6
8TH
RU
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-60 GieseckeEngineering Graphics, 8ECaption: Clamp. Draw all required views. Include at least one auxiliary view (Layout A–3 or A4–3 adjusted).
AACXFIS0
FRON
TVIE
W
2.00
3.50
60°
1.751.25
.50
.50
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-61 GieseckeEngineering Graphics, 8ECaption: Plastic Slide. Draw all required views. Include at least one auxiliary view (Layout A–3 or A4–3 adjusted).
AACXFIV0
R.62
1.25.62
(2.43)
R.28
R.56
.06
.12
:.62THRU
1.12
.50
0.6
FRON
TVIE
W
1.50
1.0R.21
R.50
.50
1.0
32°
©2004 by Prentice Hall, Inc.A Pearson Company
Figure Number: 08-62 GieseckeEngineering Graphics, 8ECaption: Mounting Clip. Draw all required views. Include at least one auxiliary view (Layout A–3 or A4–3 adjusted).
AACXFIW0