about google analytics (part 2) - mercury1 · this again is useful in conjunction with any adwords...

Version 1.0

About Google Analytics (Part 2) of 14

ABOUT GOOGLE ANALYTICS (PART 2)

DOCUMENT CONTROL

Document title About Google Analytics (Part 2)

Version 1.0 Status Release Reference M1Goo-002

Author Tara Wilson Date 24 April 2009

Version 1.0


CONTENTS

1. About this Document ............................................................... 3

2. Analytics Reports .................................................................... 3

3. The Breakdown ....................................................................... 4

3.1. Left-hand navigation menu .................................................... 5

1.1.1. Dashboard.............................................................................. 6

1.1.2. Visitors .................................................................................. 6

1.1.3. Traffic Sources ........................................................................ 7

1.1.4. Content.................................................................................. 8

1.1.5. Goals ..................................................................................... 9

3.2. Reports switcher ................................................................ 10

3.3. Date Range ....................................................................... 10

1.1.6. Calendar .............................................................................. 10

1.1.7. Date Comparisons ................................................................. 11

1.1.8. Timeline ............................................................................... 11

3.4. Overview graph .................................................................. 11

3.5. Site usage ......................................................................... 12

3.6. Other data boxes................................................................ 13

4. Next time... ........................................................................... 14

Version 1.0


1. ABOUT THIS DOCUMENT

This instruction document is the second in a series about Google analytics. It is design to give you an

in-depth introduction into using Google analytics. Each document in the series will focus on a certain

section of the Analytics

This document is an introduction to the basics of reading and analysing your Analytics reports – how

to find all the data you need and use it to determine the performance of your website.

2. ANALYTICS REPORTS

Version 1.0


This is the main page you will see when you log in to view your report – the dashboard. The boxes at

the bottom of the page (from Visitors Overview to Content Overview) are fully editable so you can

display here almost any element you wish.

3. THE BREAKDOWN

I have split the dashboard into 6 sections to focus on. These sections are as follows:

1. Left-hand navigation menu

2. Reports switcher

3. Date range

4. Overview graph

5. Site usage

6. Other data boxes

Version 1.0


3.1. LEFT-HAND NAVIGATION MENU

Version 1.0


1.1.1. DASHBOARD

This link takes you back to the dashboard – the first page you saw when signing in to view the report.

1.1.2. VISITORS

The Visitors link takes you through to an overview of your visitors’ activity:

Version 1.0


The visitors section of your analytics report contains a vast amount of information on the visitors that

visit your site. It shows how many new and/or returning visitors you have and how long they spent on

your site, along with the number of different pages they visited. All this information is incredibly

important for determining how your site is doing in keeping interest up, and also how effectively you

are promoting it. You can use Analytics closely with Adwords to see how well an Ad campaign is

performing (but let’s save that matter for a little later).

You can also determine many other facts about your visitors from these pages which may prove vital

in fine tuning your website. For example, you can see the location and language of your visitors – if

you have overseas customers, you can find out which countries are the top visitors to your site and

find out if you need to implement any/more accessibility in order to keep those visitors. Another

example is that you can see which web browser the majority of your visitors are viewing the website

in. It is important to check that your website looks the same and performs identically across all

browsers. Knowing which browsers your visitors use helps determine an order of importance in the

browsers you should check the website in.

1.1.3. TRAFFIC SOURCES

The Traffic Sources link takes you through to an overview of the origin of your visitors:

Version 1.0


This section provides data on the sources which send traffic to your website. These sources could be

anything from direct traffic to search engines or referring sites.

Knowing where your customers come from is invaluable knowledge and can be key for the marketing

of your products. Say the direct traffic to your website is generally constant at 50% of your traffic each

month (this will be those who have you bookmarked, or have typed your address directly into their

web browser because you have an amazingly memorable URL!). If you decide to start an advertising

campaign in a newspaper or on TV you will be able to see the success of this placement both by how

much your overall number of visitors increases, and also how the percentage of direct traffic

increases. Of course, if there is not a significant raise in either of these then you know your marketing

techniques are not doing the trick...

This again is useful in conjunction with any Adwords campaigns you may be running as you are able to

see which Ads are performing the best, and also which keywords are summoning up the most

interest.

1.1.4. CONTENT

The Content link takes you through to an overview of the performance of your website content:

Version 1.0


Here we come to a section all about the pages within your website and how they are performing in

relation to the way traffic acts when visiting these pages. Performance of a page is based on a number

of factors: pageviews, time on page, bounce rate, % exit, and more.

N.B. Here are some definitions for you:

PAGEVIEWS – the number of times the page has been viewed within the specified

time frame

TIME ON PAGE – the average amount of time each visitor to the page lingered for

BOUNCE RATE – a bounce is measured when a person views a webpage and then

immediately navigates away by clicking the “back button”. The bounce rate is

measured as the percentage of visitors who bounced from the page

% EXIT – this is the percentage of visitors who navigate away from the website

entirely after viewing the page

If you have any pages on your website which are not pulling their weight – that do not have enough

information to capture visitor imagination – you will be able to spot these here and set about doing

something to improve the content on those pages. A key factor to look at when determining poorly

performing pages are those with high bounce rates and % exits

1.1.5. GOALS

This section will only be accessible if you have created Goals and made sure that they are active.

This follows the performance of the goals you set up (see Mercury1 Google Analytics Part1) – how

many visitors completed your goals. You can also use this section to see where visitors who started

but did not complete you goals bailed out, a helpful insight to which part of a process you wish

visitors to follow is weakest. Once the weakest part is discovered, you can refine that page in order to

ensure the maximum amount of visitors possible finish the process.

Version 1.0


The Goals overview page looks like this:

3.2. REPORTS SWITCHER

If you have more than one report on more than one website under the same account, you can easily

switch between them by using this dropdown.

3.3. DATE RANGE

Changing the date range here will affect all the data that you view on the report – if you set the date

range for the whole of March, the only data you see in all sections will be data that was collected in

March of the year that you select. You can also compare two date ranges.

There are three ways to select your date range – typing in manually, visually increasing the range or

selecting dates on a calendar.

1.1.6. CALENDAR

Version 1.0


The desired date range can be selected here by clicking the start and end date sequentially on the

calendar, or by typing the dates in on the right-hand side.

1.1.7. DATE COMPARISONS

You can compare two dates by ticking the “Compare to Past” checkbox and then either selecting or

typing in a date in the past. The first range (blue) must be the most recent date, and the second date

(green) must lie before or within (or a mixture of) the blue date.

1.1.8. TIMELINE

Another way of selecting you dates is to click onto the “Timeline” tab (top left of the image) and click

and drag the sides of the coloured boxes on the timeline. The bar chart displayed depicts the number

of visits to the site per day.

3.4. OVERVIEW GRAPH

This is a nice little feature for seeing a quick overview of the site’s performance in a graphical format.

By default, it shows a line graph of the number of visits from day-to-day between the date range that

you have chosen. This can also be viewed by week or by month by selecting the appropriate value at

the top-right of the graph (I’d suggest only using Graph by week or month if you have chosen a

suitably long date range!).

Version 1.0


You can also change what the graph depicts by clicking on the “Visits” tab at the top-left of the graph

and selecting your desired value in the box which appears:

3.5. SITE USAGE

The site usage section of the dashboard is also a nice overview of your site’s performance – this time

in numerical format.

Clicking on any of the data types displayed, i.e. visits, will take you through to a day-by-day bar chart

breakdown:

Version 1.0


% New Visits is displayed as a pie chart:

3.6. OTHER DATA BOXES

These are small overviews of different sections of the report – visitors, traffic sources, content etc.

These boxes are editable – you can choose which ones you see and which order they are displayed in.

Version 1.0


If you wish to add additional boxes to the dashboard, you must do this from the appropriate page

within the report. Use the left-hand menu to navigate to the correct page (let’s say the top landing

pages) and click “Add to Dashboard” at the top of the page:

The Top Landing Pages Overview box will then have been added to the bottom of your dashboard

page.

N.B. You cannot add more than 12 reports to the dashboard.

4. NEXT TIME...

Look forward to more in-depth instructions on using each section of the report. We

will break down each section and show you how to find any data about your website

performance you wish to analyse.

about google analytics (part 2) - mercury1 · this again is useful in conjunction with any adwords...

Documents