AC

40

SE

RIE

S

TELESCOPIC CRANE

FOR NEW EQUIPMENT SALES, CALL

866.966.2969TO SPEAK WITH AN ALTEC REPRESENTATIVEor visit us online at altec.com

AC40 SERIESSTANDARD FEATURES OPTIONS

• Altec LMAP (Load Moment & Area Protection) System

» Rated Capacity Limiter

» Displays: Boom Length, Boom Angle, Load on Hook, Percent of Rated Capacity

»OperatorDefinedAudibleAlarmSet-PointsforBoomAngle,Length and Rotational Position

•DualEntry20°TiltCabwithHeaterandA/C

•OutriggerBoomInterlockSystem

•OutriggerMotionAlarm

•WinchDrumRotationIndicator

•Anti-TwoBlockDevice

• Rotation Resistant Wire Rope

• WinchControlatLoadHookStowPoint

•HydraulicOilCoolingSystem

•FrontBumperOutrigger

•ASMEB30.23PersonnelLiftingPackage

»2-Man,SteelPlatform Fixed,362.8kg(800lb)Capacity Rotating,544.3kg(1,200lb)Capacity

» Radio Remote Controls

» Fall Protection

• ASMEB30.23CompliantTestWeightPackage

• 1-Piece9.4m(31ft)Jib

• 2-Piece16.8m(55ft)Jib,9.4m(31ft)Retracted

• AuxiliaryHoist

• GlideSwing

• Emergency12VDCLoweringSystem

CRANE SPECIFICATIONS

MaximumLiftCapacity 36,287kg(80,000lb)

BoomLength(4-Section) 31.4m(103ft)

PoweredSheaveHeight 34.4m(112ft)

MaximumSheaveHeight 51.2m(168ft)

StowedTravelHeight 3.9m(12.9ft)

VehicleTravelLength 11.6m(38ft)

3PositionOut-and-DownOutriggers

FullSpan 7.3m(24ft)

Mid Span 4.8m(15.8ft)

Short Span 2.5m(8.17ft)

Control System Pilot-Operated,Hydraulic

ASMEB30.5Compliant

A L T E C | A L T E C . C O M / C R A N E S

MaximumLiftCapacity 36,287kg(80,000lb)

BoomLength(5-Section) 38.7m(127ft)

PoweredSheaveHeight 41.8m(137ft)

MaximumSheaveHeight 58.5m(192ft)

StowedTravelHeight 3.9m(12.9ft)

VehicleTravelLength 11.6m(38ft)

3PositionOut-and-DownOutriggers

FullSpan 7.3m(24ft)

Mid Span 4.8m(15.8ft)

Short Span 2.5m(8.17ft)

Control System Pilot-Operated,Hydraulic

ASMEB30.5Compliant

AC40-103S AC40-127S

8 6 6 . 9 6 6 . 2 9 6 9 | S A L E S @ A L T E C . C O M

LOAD MOMENT AND AREA PROTECTIONTheabilitytoprovidevitaldatatooperators,continuouslymonitorcraneoperationandsendalertsofpotentialoverloads,whilemaximizingcraneworkcapacity,isinvaluable.TheLMAPsystemofferscustomersandoperatorseasyoperation,fastcalibrationandreliabletechnology.

LOWER WINCH CONTROLThelowerwinchcontrolhelpspreventboomdamagebyreducingtheflowpressuretothewinchduringstowage.Theoperatorcancontroltheloadblockorballwhilewinchingupordownduringsetupandstowagewithouttheneedtoaccesstheuppercontrolstation.Reducingslip/trip/fallhazardexposure.

DUAL ENTRY CABAltec’sdualentrycabprovidessafeaccess/egressthroughouttheentirerangeofrotation.The20degreetiltfeaturemaximizestheviewingspectrumonthejobsite.

LOAD CHART - FULL SPAN OUTRIGGERS

Note 1:Whenjibiserected,boommustbefullyretractedbeforeloweringbelowminimumboomwithjibangles.Retractedboomwithjibhasnoliftingcapacitybelowa50degreeanglewithfullspanoutriggersand belowa65degreeanglenotshownonjibloadratingchart.Note 2:Donotlowerboomintothisarea,instabilitymayoccur.Hydraulicpressuremaynotallowraisingtheboomwithoutretractingboomfirst.

Chartspublishedhereinareintendedtobeaguideonlyandshouldnotbeconstruedtowarrantapplicationforliftingpurposes.Consultsuppliedoperationmanualforfurtherdetails.

210 Inverness Center DriveBirmingham, AL 35242Fax 205.449.4774www.altec.com

For more complete information on Altec products and services, visit us on the web at www.altec.com.

© 2014 Altec IncAll Rights Reserved

Material and specifications are subject to change without notice. Featured units in photos may include optional features. Please contact an Altec representative for all available options. Charts published herein are intended to be a guide only and should not be construed to warrant application for lifting purposes. Consult supplied operation manual for further details.

Altec® and the Altec logo are registered trademarks of Altec Inc in the United States and various other countries and may not be used without permission.

866-966-2969sales@altec.com

AIOSAC38127S-1214-v1-r1