academic year 2016-2017 application no. st shift – second...
TRANSCRIPT
Application No.
(for office use only)
INSPECTION REPORT[FULL TIME – GENERAL / 1st SHIFT – SECOND YEAR]
FOR POLYTECHNIC COLLEGES ESTABLISHED / AFFILIATED FOR FIRST YEAR DURING 2015-2016 AND SEEKING GRANT OF AFFILIATION UNDER FULL TIME – GENERAL /
1st SHIFT – SECOND YEAR FOR THE ACADEMIC YEAR 2016-2017
Name of the Trust / Society
:
Name of the Institution :Institution Code :District :Established during : 2015– 20161st Year Affiliation Order No.with date
:
Seeking Affiliation for : Second Year : 2016 – 2017Mode : FULL TIME – GENERAL / 1st
SHIFTDate of Inspection :
Name & Designation of Convenor
:
Name & Designation of Member
:
Name & Designation of Member
:
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 2
2016-2017
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 3
INSPECTION REPORTINSPECTION REPORT FOR POLYTECHNIC COLLEGES ESTABLISHED / AFFILIATED FOR FIRST YEAR DURING 2015-2016 AND SEEKING GRANT OF AFFILIATION UNDER
FULL TIME – GENERAL / 1st SHIFT – SECOND YEAR FOR THE ACADEMIC YEAR 2016-2017
Date of Inspection : -- --
Time of Inspection
01. INSPECTION FEE :
S.No Demand Draft No. Demand Draft Date Name of the Bank
Name of the Branch & code Amount
Rs.
Inspection Fee : Rs. 5000 for every Sanctioned Intake of 60. Sanctioned Intake has to be calculated for First Year and Second Year. [Example : First Year Sanctioned intake: 300, Second Year Sanctioned Intake: 420 then for Total Sanctioned Intake of 720, Rs. 60,000 to be paid as Inspection Fee]
Demand Draft in favour of "Director of Technical Education, Chennai" payable at Chennai should be enclosed.
02. Name and Designation of the Convener :
:
Name and Designation of the Member :
:
Name and Designation of the Member :
:
03. Year of establishment :
04. DETAILS OF THE AICTE APPROVED COURSES TO BE INSPECTED – FULL TIME – GENERAL / FIRST SHIFT PROGRAMME
Sanctioned Intake Sanctioned Intake 2015-16 2016-2017
AICTE Approval Letter No. & DateS.No Discipline [Course
Details] II Year I Year01.
02.
03.
for 2015-16
04.
05.
TOTAL ANNUAL INTAKE
for 2016-17
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 4
05 (a) NAME AND ADDRESS OF THE INSTITUTION AT THE PERMANENT SITE
Name of the Institution :
Address of the Institution :
Village / Town :
Taluk :
District :
Pincode :
Assembly Constituency :
Parliament Constituency :
Phone : STD Code: Phone No.:
Fax : STD Code: Fax No.:
Mobile :
E-mail :
05 (b) NAME AND ADDRESS OF THE SOCIETY / TRUST / COMPANY ESTABLISHED UNDER SECTION 25 OF COMPANIES ACT 1956
Name of the Trust / Society / Company :
Address of the Trust / Society / Company :
Village / Town :
Taluk :
District :
Pincode :
Assembly Constituency :
Parliament Constituency :
Phone : STD Code: Phone No.:
Fax : STD Code: Fax No.:
Mobile :
E-mail :
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 5
06 (a) DETAILS OF THE SOCIETY / TRUST / COMPANY
Society Registration Act No. / Trust Act No. / Company Act No. :
Registration No. :
Date of Registration :
Place of Registration :
06 (b) DETAILS OF THE LANDS [PERMANENT SITE AS APPROVED BY AICTE]
Classification of the Permanent Site : Rural Area
(Please Click on any one of the classification) Other than Rural area
Ownership of Land : Government Trust SocietyGovt. Leased Owned Company
Details of Land(The Survey No. with sub-division and extent of lands for each survey number to be indicated)Sl.No.
RegistrationDocument No.
RegistrationDate
Name of the village
Survey No. with sub-division
Extent of Lands
(in acres)
Land Classification [Indicate Dry or Wet Land]
TOTAL ---
06 (c) DETAILS ABOUT THE BUILDING OF THE INSTITUTION AT THE PERMANENT SITE
Whether the Building Plan is approved by the competent authority : Yes No
Name of the authority approved the building plan :
Designation of the authority approved the building plan :
Date of Approval with Proceedings Number :
06 (d) PHYSICAL INFRASTRUCTURE - COMPLETE DETAILS OF BUILT-UP AREA
FIRST YEAR AND SECOND YEAR S.No
Built-up (Carpet) Area[in sq.m] Structure [RCC only] Required Area Available Area
(a) Instructional area [INA] R.C.C
(b) Administrative area [ADA] R.C.C
(c) Amenities area [AMA] R.C.C
TOTAL AREA :
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 6
07. PRINCIPAL
(*) As per AICTE regulations 2013, please refer to Gazette of India Notification dated 5th March 2010, Pay Scales, Service Conditions and Qualifications for the teachers and other academic staff in technical Institutions (Diploma) Regulations, 2010. Also refer AICTE Website: Bulletin – FAQ section. For PRINCIPAL : Bachelor’s degree and Master’s degree of appropriate branch in Engineering / Technology with First Class or equivalent either Bachelor’s or Master’s level and Ph. D in Engineering / TechnologyEXPERIENCE : Minimum of 10 years relevant experience in teaching / Research / Industry out of which at least 3 years shall be at the level of head of department or equivalent. AGE : Permissible Maximum age limit : 65 YearsGUIDELINES :AGE : If the age of the Principal is 65 years, then Marks to be allotted is : 05, Otherwise 00.£QUALIFICATION : If the Qualification is Ph.D, then Marks to be allotted is 05
If the Qualification is M.E., then Marks to be allotted is 03, Otherwise 00.EXPERIENCE : If the Experience is 12 years, then Marks to be allotted is 05³ If the Experience is between 10 and < 11 years, then Marks to be allotted is 03, Otherwise 00.³
a. Name :
b. Qualification :
c. Experience (in years) :
d. Date of Joining :
e. Date of Birth & Age :
S.No Description Details Maximum Marks Marks Secured
f. Age 05
g. Qualification 05
h. Experience 05
TOTAL MARKS : 15
TOTAL MARKS SECURED FOR PRINCIPALCADRETOTAL MARKS SECURED5 xTOTAL MAXIMUM MARKS
=
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 7
08. FACULTY AND STAFF REQUIREMENTS [FIRST AND SECOND YEAR ONLY]
(i) TOTAL SANCTIONED INTAKE [ I + II YEARS] :
(ii) TOTAL STAFF REQUIRED [at the ratio of 1 : 20] :
(iii) TOTAL STAFF AVAILABLE [ON THE PAY ROLL] -
(iv) STAFF STUDENT RATIO [BASED ON PAYROLL] -
(v) DETAILS OF FACULTY [BASED ON PAYROLL] -
Discipline HOD Lecturer TOTALREQUIRED AVAILABLE REQUIRED AVAILABLE REQUIRED AVAILABLE
1. FIRST YEAREnglishMathematicsPhysicsChemistryEngineering
2. SECOND YEARCIVILMECHANICALEEEECECOMPUTERITAUTOMOBILEMARINEMECHATRONICS
TOTAL :
S.No Category Maximum
MarksRequired as per AICTE
NormsAvailable Shortage
Secured MarksMax.Marks x Available
Requiredé ùê úë û
a. Faculty for I & II Year 15
b. Librarian 02
c. Physical Education Director 02
d. Technical Supporting Staff [Non-Teaching] 02
e. Administrative Staff 02
f. Basic Servants 02
TOTAL MARKS : 25 MARKS SECURED :
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 8
REQUIREMENT – ALL THE FACULTY & STAFF SHOULD BE ON PAY ROLL.Faculty for First year : Faculty : Student Ratio = 1 : 20 – must be computed based on Sanctioned
intake only. While computing Faculty Student ratio - Principal, Librarian, Physical Director, Non-Teaching, Ministerial staff and identified staff, if any, should not be included. Marks should be awarded proportionate to faculty available in the institution. Criteria enclosed as Annexure.
Librarian : OnePhysical Education Director : OneTechnical Supporting Staff : Workshop Instructor : 1
Skilled / Lab. Assistant : One Lab. Assistant for each laboratory [as in odd semester]
Unskilled Assistant : One Assistant for each DepartmentAdministrative Staff : As per Institutions requirement – Can be in the cadre of Superintendent,
Assistant & Typist – Minimum 3 is desired.Basic servants : As per Institutions requirement – Can be in the cadre of Office Assistant,
Watchman, Sweeper & Sanitary Worker – Minimum 4 is desired.
09. LIBRARY
S.No Description Max
MarksRequired as per AICTE
NormsAvailable Shortage
Secured MarksMax.Marks x Available
Requiredé ùê úë û
B1 : 50
a. Number of Titles 03 B2 : 25 / COURSE
B4 : 250 / DIVISION
b. Number of Volumes 05B5 : 125 /
DIVISION
c. No. of Journals 02 B6 : 3 / DIVISION
TOTAL MARKS : 10 MARKS SECURED :
REQUIREMENTS - LIBRARY
B = Number of Divisions [1 Division = 60]. If the Institutions has got approval from AICTE for the conduct of 5 Courses with a sanctioned intake of 60 in each Course, then the No. of Divisions (B) = 5. For Number of Volumes and journals, this number (say, 5) has to be multiplied.
Number of Titles B1 : First Year : Only 50 number of Titles of Books for whole First yearB2 : Second Year : 25 per Course
Number of Volumes B4 : First Year : 250 x No. of Divisions (B)B5 : Second Year : 125 x No. of Divisions (B)Marks should be awarded proportionate to Volume of Books available in the library
Number of Journals B7 : 3Journal for each Division for each I & II year
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 9
10. EQUIPMENT
GUIDELINES FOR MARKS TO BE ALLOTTED FOR EQUIPMENT :
AVAILABILITY AND WORKING CONDITION (Maximum 5 marks) :Quantity Available No. of Equipment NOT in working conditionCalculate the ratio
Quantity Required-=
If the ratio is equal to 100%, then Marks to be allotted in Column (8) is : 5If the ratio is between 75% and < 100%, then Marks to be allotted in Column (8) is : 4³If the ratio is between 50% and < 75%, then Marks to be allotted in Column (8) is : 3³If the ratio is between 25% and < 50%, then Marks to be allotted in Column (8) is : 2³If the ratio is between 1% and < 25%, then Marks to be allotted in Column (8) is : 1³If the ratio is equal to 0%, then Marks to be allotted in Column (8) is : 0
DETAILS OF THE LABORATORIES FOR FIRST YEAR / COMMON LABORATORIES AND COURSE WISE FOR SECOND YEAR IS ENCLOSED AT THE END OF THE INSPECTION REPORT.
10 (A) EQUIPMENT - SUMMARY
Maximum Marks allotted for each category : 35 Marks
S.No Category Description of Laboratories Total Max.
Marks
Total Marks
Secured
Minimum Marks to be
secured
Marks Secured
I. FIRST YEAR AND GENERAL / COMMON LABORATORY
I (a) Ist YEAR ENGINEERING PHYSICS – I PRACTICAL 40
I (b) Ist YEAR ENGINEERING PHYSICS – II PRACTICAL 50
I (c) Ist YEAR ENGINEERING CHEMISTRY – I & II PRACTICAL 215
I (d) Ist YEAR WORKSHOP PRACTICE 180I (e) COMMON COMPUTER CENTRE 40I (f) COMMON COMMUNICATION AND LIFE
SKILL PRACTICAL 75
30
Cat. I MARKS SECURED FOR Ist YEAR/COMMON 600 30
II. CIVIL ENGINEERING
II (a) CIVIL MATERIAL TESTING LAB PRACTICE I
168
II (b) CIVIL SURVEYING PRACTICE I 104
II (c) CIVIL MATERIAL TESTING LAB II 260
II (d) CIVIL SURVEYING PRACTICE II 20
II (e) CIVIL CAD IN CIVIL ENGINEERING DRAWING
48
30
Cat. II MARKS SECURED FOR CIVIL ENGG. 600 30
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 10
S.No Category Description of Laboratories Total Max.
Marks
Total Marks
Secured
Minimum Marks to be
secured
Marks Secured
III. MECHANICAL ENGINEERING
III (a) MECH MECHANICAL TESTING & QUALITY CONTROL
133
III (b) MECH FLUID POWER PRACTICAL 55
III (c) MECH COMPUTER AIDED MACHINE DRAWING
20
III (d) MECH MANUFACTURING TECHNOLOGY - I
284
III (e) MECH METROLOGY & MEASUREMENT AND MACHINE TOOL TESTING
55
III (f) MECH ELECTRICAL DRIVES AND CONTROL
53
30
Cat. III MARKS SECURED FOR MECH. ENGG. 600 30
IV. ELECTRICAL AND ELECTRONICS ENGINEERING
IV (a) EEE ELECTRICAL CIRCUITS AND MACHINES PRACTICAL
155
IV (b) EEE ELECTRONIC DEVICES AND CIRCUITS PRACTICAL
120
IV (c) EEE ELECTRICAL MACHINES AND INSTRUMENTATION
245
IV (d) EEE DIGITAL ELECTRONICS AND LINEAR INTEGRATED CIRCUITS
80
30
Cat. IV MARKS SECURED FOR EEE 600 30
V. ELECTRONICS AND COMMUNICATION ENGINEERING
V (a) ECE ELECTRONIC DEVICES AND CIRCUITS PRACTICAL
120
V (b) ECE ELECTRICAL CIRCUITS AND INSTRUMENTATION
126
V (c) ECE PROGRAMMING IN C 154
V (d) ECE INDUSTRIAL ELECTRONICS AND COMMN. ENGG.
120
V (e) ECE INTEGRATED CIRCUITS PRACTICAL
80
30
Cat. V MARKS SECURED FOR ECE 600 30
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 11
S.No Category Description of Laboratories Total Max.
Marks
Total Marks
Secured
Minimum Marks to be
secured
Marks Secured
VI. COMPUTER ENGINEERING
VI (a) COMP ELECTRICAL AND ELECTRONICS LAB
125
VI (a) COMP LINUX PRACTICAL 167
VI (a) COMP C PROGRAMMING PRACTICAL
154
VI (a) COMP JAVA PROGRAMMING PRACTICAL
154
30
Cat. VI MARKS SECURED FOR COMP. ENGG. 600 30
VII. INFORMATION TECHNOLOGY
VII (a) IT ELECTRICAL AND ELECTRONICS LAB
125
VII (a) IT LINUX PRACTICAL 167
VII (a) IT C PROGRAMMING PRACTICAL
154
VII (a) IT JAVA PROGRAMMING PRACTICAL
154
30
Cat.VII MARKS SECURED FOR INF. TECH. 600 30
VIII. AUTOMOBILE ENGINEERING
VIII (a) AUTO MECHANICAL TESTING & QUALITY CONTROL
133
VIII (a) AUTO AUTOMOBILE CHASSIS AND TRANSMISSION
150
VIII (a) AUTO COMPUTER AIDED MACHINE DRAWING
20
VIII (a) AUTO HEAT POWER ENGINEERING PRACTICAL
152
VIII (a) AUTO INDUSTRIAL AUTOMATION PRACTICAL
145
30
Cat.VIII MARKS SECURED FOR AUTOMOBILE 600 30
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 12
S.No Category Description of Laboratories Total Max.
Marks
Total Marks
Secured
Minimum Marks to be
secured
Marks Secured
IX. MARINE ENGINEERING
IX (a) MARINE STRENGTH OF MATERIALS AND FLUID MECHANICS
110
IX (a) MARINE SHIP CONSTRUCTION TECHNOLOGY PRACTICAL
167
IX (a) MARINE WORKSHOP TECHNOLOGY II PRACTICAL
250
IX (a) MARINE COMPUTER AIDED MARINE ENGINEERING DRAWING
20
IX (a) MARINE ELECTRICAL DRIVES AND CONTROL
53
30
Cat. IX MARKS SECURED FOR MARINE ENGG. 600 30X MECHATRONICS
X (a) ELECTRONICS DEVICES AND CIRCUITS PRACTICAL
100
X (b) ELECTRICAL CIRCUITS AND MACHINES PRACTICAL
100
X (c) MANUFACTURING TECHNOLOGY PRACTICAL
100
X (d) COMPUTER APPLICATIONS PRACTICAL --X (e) ANALOG AND DIGITAL ELECTRONICS
PRACTICAL100
X (f) PROGRAMMING IN C PRACTICAL 100X (g) COMMUNICATION AND LIFE SKILLS
PRACTICAL--
30
Cat.X MARKS SECURED FOR Mechatronics 500 30
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 13
11. ACADEMIC INFRASTRUCTURE – FIRST AND SECOND YEAR
If there is no shortage in the required number and in the area, then the mark to be allotted for each Serial Number in the category is 01
If there is any shortage, either in the required number and / or in the area, then the mark to be allotted for each Serial Number in the category is 00
Number Details Area Details
S.No Category INA
Num
ber
Req
uire
d
Num
ber
Ava
ilabl
e
Shor
tage
Bui
lt-up
Are
a R
equi
red
Bui
lt-up
Are
a A
vaila
ble
Shor
tage
Max
imum
Mar
ks
(1 fo
r eac
h ap
plic
able
item
)
Mar
ks S
ecur
ed
AICTE NORMS[AREA / ROOM]
1. Class Room 1 INA
2. Class Room 2 INA
3. Class Room 3 INA
4. Class Room 4 INA
5. Class Room 5 INA
6. Class Room 6 INA
7. Class Room 7 INA
8. Class Room 8 INA
9. Class Room 9 INA
10. Class Room 10 INA
11. INA
12. INA
13. INA
14. INA
15. INA
C = 0.75xNo. of divisions
(1 division=60)[66 sq.m/room] (1 class room
for each division of 60)
16. Tutorial Room 1 INA
17. Tutorial Room 2 INA
18. Tutorial Room 3 INA
19. INA
20. INA
D = C / 4[33 sq.m/room] = (number of divisions/4)
As per AICTE norms
[66 sq.m for each
Laboratory and 200 sq.m. for
each work shop]
As per AICTE norms
i.e.area details furnished in application uploaded in AICTE web
portal for Lab & Workshop
21. Workshop INA
22. INA[200 sq m /workshop]
23. Laboratory 1 INA
24. Laboratory 2 INA
25. Laboratory 3 INA
26. Laboratory 4 INA
27. Laboratory 5 INA
28. Laboratory 6 INA
29. Laboratory 7 INA
As per AICTE Norms
2 Lab/ Course for I year, 2 Lab/ Course for II year,
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 14
30. Laboratory 8 INA
31. Laboratory 9 INA
32. Laboratory 10 INA
33. Laboratory 11 INA
34. Laboratory 12 INA
35. Laboratory 13 INA
36. Laboratory 14 INA
37. Laboratory 15 INA
38. Laboratory 16 INA
39. Laboratory 17 INA
40. Laboratory 18 INA
41. Laboratory 19 INA
42. Laboratory 20 INA
43. INA
44. INA
45. INA
46. INA
47. INA
48. INA
49. INA
50. Additional Workshop
INA
51. Additional Workshop
INA
52. Additional Workshop
INA
53. INA
54. INA
if additional workshop is available, Lab area may be reduced accordingly
[66 sq.m/Lab][200 sq.m/ Addl.workshop]
Area details furnished in Application uploaded ( PART 1,2& Deficiency Report) in AICTE web portal for Lab & workshop may be verified
55. Computer Centre
INA 1 01 No.[100 sq.m]
56. Drawing Hall INA 1 01 No.[132 sq.m]
57. Library *& Reading Room
INA 1 01 No.[300 sq.m]
58. Seminar Hall INA 1 01 No.[132 sq.m]
59. Principal Room ADA 1 01 No.[30 sq.m]
60. Board Room ADA 1 01 No.[20 sq.m]
61. College Office ADA 1 01 No.[150 sq.m]
62. Department Office
ADA 11 for each
course[20 sq.m /
Dept. office]*For Library, if sanctioned intake in I or II year exceeds 420, Library additional area of 50 Sq m for each additional intake of 60 beyond 420, shall be increased.
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 15
63. HOD Cabin ADA 11 for each
course[10 sq.m / HOD
Cabin]
64. Faculty Room – I Year
ADA 15 Sq.m for each First Year Faculty
=( 0.25 * I Yr Intake)
65. Faculty Room – II Year
ADA 15 Sq.m for each
Second Year Faculty
=( 0.25 * II Yr Intake)
66. Central Stores AMA 1 01 No.[30 sq.m]
67. MaintenanceAMA
1 01 No.[10 sq.m]
68. SecurityAMA
1 01 No.[10 sq.m]
69. House KeepingAMA
1 01 No.[10 sq.m]
70. Pantry for staffAMA
1 01 No.[10 sq.m]
71. Exam OfficeAMA
1 01 No.[30 sq.m]
72. Placement Office
AMA1 01 No.
[30 sq.m]
73. Gents ToiletAMA
1 01 No. [75 sq.m]
74. Ladies ToiletAMA
1 01 No. [75 sq.m]
75. Boys Common Room
AMA1 01 No.
[75 sq.m]
76. Girls Common Room
AMA1 01 No.
[75 sq.m]
77. Cafeteria AMA 1 01 No.[150 sq.m]
78. Stationary Store & Reprography
AMA 1 01 No.[10 sq.m]
79. First Aid cum Sick Room
AMA 1 01 No.[10 sq.m]
TOTAL MARKS :
Total Marks Secured for Academic Infrastructure category =TOTAL MARKS SECURED15 xTOTAL MAXIMUM MARKS
=
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 16
12. GENERAL FACILITIES - ESSENTIAL REQUIREMENTS
If the Essential requirements are available, then the mark to be allotted for each Serial Number in the category is 01
If the Essential requirements are not available, then the mark to be allotted for each Serial Number in the category is 00
S.No Description Availability
[YES / NO]If YES, then
Number AvailableMaximum
MarksMarks
Secured1. Language Laboratory 1
2. Water supply 1
3. Electric supply 1
4. Generator facility 1
5. Sewage Disposal 1
6. Telephone and Fax 1
7. First Aid facility 1
8. Vehicle parking 1
9. Institution Web-site 1
10.
Barrier Free built Environment for Differently-Abled and elderly persons including availability of specially designed toilets for ladies and gents separately.
1
11. Safety provisions including fire and other calamities 1
12. General Insurance provided for assets against fire, burglary and other calamities 1
13. All weather approach road 1
14. General Notice Board and Departmental Notice Boards 1
15. Medical and Counseling Facilities 1
ESSENTIAL IN LIBRARY
16. Digital Library facility 1
17. Reprographic Facility 1
18. Document scanning facility 1
19. Document printing facility 1
20. Internet facility in Library 1
21. Multimedia Facilities 1
22. Central Xerox Facility 1
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 17
ESSENTIAL FOR THE CONDUCT OF EXAMINATION
23. Strong Room [Storing QPs & ASs] 1
24. Security arrangement [Day / Night] 1
25. Sufficient halls for Examination 1
TOTAL MARKS : 25
Total Marks Secured for Essential General Facilities category =TOTAL MARKS SECURED10 xTOTAL MAXIMUM MARKS
=
13. GENERAL FACILITIES - DESIRED REQUIREMENTS
Since, the following requirements are mentioned as desired in AICTE norms, marks need not be allotted.
S.No Description Availability[YES / NO]
Details to be provided.[Number,
if so required]REQUIREMENT
1.Public announcement system at strategic locations for general announcements / paging and announcements in emergency
DESIRED
2. Enterprise Resource Planning (ERP) Software for Student-Institution-Parent interaction DESIRED
3. Transport DESIRED
4. Post, Banking Facility / ATM DESIRED
5. CCTV Security System DESIRED
6. LCD (or similar) projectors in classrooms DESIRED
7. Group Insurance to be provided for the employees DESIRED
8. Insurance for students DESIRED
9. Staff Quarters DESIRED
10. Principal’s Quarters DESIRED[150 sq.m]
11. Guest House DESIRED[30 sq.m]
12. Sports Club / Gymnasium DESIRED[100 sq.m]
13. Auditorium / Amphi Theatre DESIRED[250 sq.m]
14. Boys Hostel DESIREDAdequate
15. Girls hostel DESIREDAdequate
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 18
14 (a) TOTAL MARKS SECURED
If the Marks secured in Column (5) is less than the Minimum Marks to be secured in column (4), then indicate YES in the Deficiency column (6). Otherwise, indicate NO.
If any Course is not Offered, merge the Column (5) and (6) and indicate as NOT OFFERED.Equipment for First Year & Common Laboratories are COMPULSORY.
S.No. Parameter Maximum
MarksMinimum Marks to be secured
Marks Secured
Deficiency[YES / NO]
(1) (2) (3) (4) (5) (6)
I. EQUIPMENT : ( Marks to be filled only for Available Courses)
1. FIRST YEAR & COMMON LAB 35 302. CIVIL ENGINEERING 35 303. MECHANICAL ENGINEERING 35 304. ELECTRICAL & ELECTRONICS 35 305. ELECTRONICS & COMMUNICATION 35 306. COMPUTER ENGINEERING 35 307. INFORMATION TECHNOLOGY 35 308. AUTOMOBILE ENGINEERING 35 309. MARINE ENGINEERING 35 30
10. MECHATRONICS 35 30
TOTAL MARKS SECURED 35 30
S.No. Parameter Maximum
MarksMinimum Marks to be secured
Marks Secured
Deficiency[YES / NO]
(1) (2) (3) (4) (5) (6)01. PRINCIPAL 05 0302. FACULTY & STAFF REQUIREMENTS 25 2203. LIBRARY 10 0904. EQUIPMENTS 35 3005. ACADEMIC INFRASTRUCTURE 15 1306. GENERAL ESSENTIAL FACILITIES 10 08
TOTAL MARKS SECURED 100 85
14 (b) COMPLIANCE REPORT AGAINST THE DEFICIENCIES NOTED BY THE INSPECTION COMMITTEE DURING LAST ACADEMIC YEAR 2014-2015 – IF APPLICABLEThe Inspection Committee is requested to verify whether the Deficiencies reported by the Inspection Committee during Last Academic year 2014-2015 have been rectified.The Compliance Report Format is hosted on our DOTE Website along with the Inspection Report. The Inspection Committee is requested to download the Compliance Report and after duly filled in, TWO sets of the Compliance Report for the respective Institutions have to be enclosed along with TWO sets of Inspection Report and should be submitted on or before the Due Date.The Inspection Committee is requested to compulsorily fill the Compliance Report of the respective Institution and enclose along with the Inspection Report.
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 19
14 (c) SPECIFIC REMARKS TO BE OFFERED BY THE COMMITTEE
Adequate – Not Adequate / Deficiencies / Short comings, if any noted during the Inspection by the Committee should be stated specifically below :
1. Instructional Area :
2. Administrative Area :
3. Amenities Area :
4. Library Books and Facilities :
5. Essential Requirements :
6. Faculty and Staff Requirements :
7. EQUIPMENT :-
(a) First Year & Common Laboratories :
(b) Civil Engineering :
(c) Mechanical Engineering :
(d) Electrical and Electronics Engg. :
(e) Electronics and Communication :
(f) Computer Engineering :
(g) Information Technology :
(h) Automobile Engineering :
(i) Marine Engineering :
(j) Mechatronics
(k)
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 20
INSPECTION REPORT - SUMMARY
Date of Inspection : -- --
Time of Inspection
01. INSPECTION FEE :
S.No Demand Draft No. Demand Draft Date Name of the Bank
Name of the Branch& Code Amount
Rs.
NAME AND ADDRESS OF THE INSTITUTION Year of Establishment :Name of the Institution :Address of the Institution :
04. DETAILS OF THE COURSES INSPECTED WITH SPECIFIC RECOMMENDATIONS
S.No Discipline [Course Details] General / 1st Shift Mode
Sanctioned Intake for 2015-
2016RECOMMENDED /
NOT RECOMMENDED
01. 1st SHIFT Full Time
02. 1st SHIFT Full Time
03. 1st SHIFT Full Time
04. 1st SHIFT Full Time
05. 1st SHIFT Full Time
TOTAL ANNUAL INTAKE ---
For all the Parameters … Maximum Marks
Minimum Marks
Marks Secured
Deficiency[YES / NO]
TOTAL MARKS SECURED 100 85PLEASE TICK ANY ONE AND STRIKE OUT THE ANOTHER ONE [RECOMMENDED / NOT RECOMMENDED]
RECOMMENDED NOT RECOMMENDED
SignatureName & Designation of Convenor :
Name & Designation of Member :
Name & Designation of Member :
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 21
DOCUMENTS, REGISTERS AND RECORDSThe following Documents, Registers and Records should be maintained / available in the Institution and it should be produced at the time of inspection to the inspection committee members.
Sl. No. Name of Register / Record Maintained / Available
(YES / NO)1. AICTE Web-portal application uploaded Copy indicating Building area details2. AICTE Letter of Approval Copy for Institution / Programmes(s)3. Department wise faculty profile4. Department wise Non-Teaching Staff Profile5. Attendance for teaching and non-teaching staff6. Advertisement for recruitment of faculty members7. Minutes of the meeting of Staff Selection Committee8. Appointment / offer letters issued to faculty members9. Joining report of staff members
10. Copy of Regulations, curriculum and syllabi (programme wise)11. Master time table for all courses and all sections with classroom arrangements 12. Academic calendar13. Accession register for library14. Stock register for equipment and machinery15. Stock register for consumable16. Stock register for furniture17. Stock register for tools 18. Minutes of the meetings of the Governing council of the college19. Minutes of the meetings of the Regd. Society / Trust / Company of the college20. Audited statement of accounts of the college 21. Cash book of the college22. Acquittance register23. Fee receipt books (including counterfoils)24. Funds position / bank certificates / FDR copies to indicate financial stability25. Composition of the Governing council26. Composition of the Anti-Ragging Committee27. Trust Deed28. Registered Land Documents and Sale Deed29. Land Use Certificate30. Land Conversion Certificate31. Land Classification certificate32. Village Map33. Combined field map of lands34. Encumbrance Certificate for land35. Patta, Chitta and Adangal for land36. Field Measurement Book for land37. Documentary proof for ownership of lands exclusively earmarked for the College38. Approved Existing Building Plan39. Building Sketch [Complete details of Rooms, Labs, W/S, Stores, Library etc.]40. Legal Opinion41. Copy of Certificate obtained under sec. 37B of TNLRA 1961 & Form No.3842. If Wet Land, Certificate under Section 47 (A) of Tamil Nadu Town and Country
Planning Act, 197143. Certificates for fire/boiler/electrical safety from competent authorities.44. Certificate from Health Inspector45. Certificate from PWD Supt. Engineer for the structural stability of the building46. Building and equipment insurance certificate.
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 22
LIST OF ENCLOSURES TO BE ENCLOSED ALONG WITH THE INSPECTION REPORT1. Inspection Fee in the form of Demand Draft YES NO2. AICTE Web-portal application uploaded Copy indicating Building area details YES NO3. AICTE Letter of Approval Copy for Institution / Programmes(s) YES NO4. Notarized Undertaking in Rs. 100 stamp paper YES NO5. Land Use Certificate issued by Revenue Divisional Officer YES NO6. Land Classification Certificate issued by Revenue Divisional Officer YES NO7. Land Conversion Certificate issued by Revenue Divisional Officer, if it is Wet Land YES NO8. If Wet Land, Certificate under Section 47 (A) of Tamil Nadu Town and Country
Planning Act, 1971 YES NO9. Certificate under Section 37-B on Tamil Nadu Land Reforms (Fixation of Ceiling
on land) Act 1961 (Tamil Nadu Act 58 of 1961). YES NO10. Copy of the Form No.38, viz. the application form for permission by Public Trust
under subsection (1) of Section 37-B of the Tamil Nadu Land Reforms (Fixation of Ceiling on Land) Act 1961 along with the covering letter addressed to (1) Principal Secretary to Government, Revenue Department, Chennai 9; (2) Commissioner of Land Reforms, Chepauk, Chennai 5 and (3) Assistant Commissioner (Land Reforms) or equivalent cadre under the jurisdiction where the Institution is located.
YES NO
11. Copy of the proceedings issued by DTCP for approval of building plan YES NO12. Copy of the Challan towards payment of infrastructure and basic amenities
charges to DTCP for approval of building plan YES NO13. Approved Existing Building Plan YES NO14. Trust Deed YES NO15. Registered Land Documents and Sale Deed YES NO16. Village Map YES NO17. Combined field map of lands YES NO18. Encumbrance Certificate for land YES NO19. Patta, Chitta and Adangal for land YES NO20. Field Measurement Book for land YES NO21. Documentary proof for ownership of lands exclusively earmarked for the College YES NO22. Building Sketch [Complete details of Rooms, Labs, W/S, Stores, Library etc.] YES NO23. Legal Opinion YES NO24. Certificates for fire/boiler/electrical safety from competent authorities. YES NO25. Certificate from Health Inspector YES NO26. Certificate from PWD Supt. Engineer for the structural stability of the building YES NO27. Building and equipment insurance certificate. YES NO
Certified that1.
The originals of all relevant Documents, Registers and Records as mentioned above have been verified by us and found to be correct.
2.
The details regarding the six parameter viz., Principal, Faculty & Staff requirements, Library, Equipment’s, Academic Infrastructure and General Essential Facilities have been personally verified by us and found to be correct.
3.
Certified that the Deficiencies reported by the Inspection Committee during the previous year have been verified by us.
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 23
10. EQUIPMENT - FIRST AND SECOND YEAR
GUIDELINES FOR MARKS TO BE ALLOTTED FOR EQUIPMENT :
AVAILABILITY AND WORKING CONDITION (Maximum 5 marks) :Quantity Available No. of Equipment NOT in working conditionCalculate the ratio
Quantity Required-=
If the ratio is equal to 100%, then Marks to be allotted in Column (8) is : 5If the ratio is between 75% and < 100%, then Marks to be allotted in Column (8) is : 4³If the ratio is between 50% and < 75%, then Marks to be allotted in Column (8) is : 3³If the ratio is between 25% and < 50%, then Marks to be allotted in Column (8) is : 2³If the ratio is between 1% and < 25%, then Marks to be allotted in Column (8) is : 1³If the ratio is equal to 0%, then Marks to be allotted in Column (8) is : 0
I. FIRST YEAR & GENERAL / COMMON LABORATORIES [COMMON FOR ALL BRANCHES]
I. (a) FIRST SEMESTER – ENGINEERING PHYSICS – I PRACTICAL [ “L” SCHEME ]
S.No List of Equipments
Qua
ntity
Req
uire
d
Qua
ntity
Ava
ilabl
e
No.
of E
quip
men
t N
OT
in w
orki
ng
cond
ition
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. MICROMETER (SCREW
GAUGE) SETUP - Screw gauge, graph sheet and irregular glass plate.
4 SETS
5
2. VERNIER CALIPERS SETUP - Vernier Calipers and Solid Cylinder
4 SETS
5
3. CONCURRENT FORCES SETUP - Vertical drawing board, two Z pulleys, three sets of slotted weights (5 x 50g) and twine thread
4 SETS
5
4. POISEUILLE’S METHOD SETUP - Burette stand, graduated burette without stopper, rubber tube, beaker, capillary Tube, digital stop watch and funnel.
4 SETS
5
5. STOKES’ METHOD SETUP – Stokes Apparatus, high viscous liquid (Castrol oil), glass beads of Different radii, digital stop watch
4 SETS
5
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 24
and screw gauge6. SURFACE TENSION SETUP -
Beaker with water, capillary tube, iron stand with clamp, pointer, travelling microscope and hydro static bench.
4 SETS
5
7. SONOMETER SETUP - Sonometer, screw gauge, tuning fork, rubber hammer, slotted weight hanger set (5 x 0.5kg) and paper rider
4 SETS
5
8. DEFLECTION MAGNETOMETER SETUP - Deflection Magnetometer, meter scale and two bar magnets
4 SETS
5
TOTAL MARKS -- -- -- -- 40
I. (b) SECOND SEMESTER – ENGINEERING PHYSICS – II PRACTICAL [ “L” SCHEME ]
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. REFRACTIVE INDEX SETUP -
Travelling Microscope, Beaker with transparent liquid & Saw dust
4 SETS
5
2. SPECTROMETER. SETUP - Spectrometer, Sodium vapour lamp, Reading lens and Glass prism
4 SETS
5
3. SOLAR CELL SETUP - Solar cell Kit for drawing the V - I characteristics
4 SETS
5
4. LAWS OF RESISTANCES - Battery Eliminator, key, rheostat, ammeter, voltmeter, Connecting wires and two known standard resistances
4 SETS
5
5. METRE BRIDGE SETUP - Meter Bridge, variable resistance box, Leclanche cell, plug Key, galvanometer, high resistance, jockey, connecting Wires and unknown resistance
4 SETS
5
6. POTENTIOMETER SETUP - 4 5
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 25
Potentiometer, two cells (Leclanche cell and Daniel cell), Battery eliminator, Rheostat, Key, two way key,Galvanometer, high resistance, jockey and connecting wires
SETS
7. JOULE’S CALORIMETER SETUP - Joule’s Calorimeter, Battery eliminator, Rheostat, Key, Ammeter, voltmeter, stop clock, thermometer, digital Balance and connecting wires
4 SETS
5
8. COPPER VOLTAMETER SETUP - Copper Voltameter, Battery eliminator, Rheostat, Key, Ammeter, stop clock, digital balance, emery sheet and Connecting wires
4 SETS
5
9. P-N JUNCTION DIODE SETUP - P-N Junction Diode forward characteristics kit
4 SETS
5
10. LOGIC GATES SETUP - Logic gates testing apparatus kit with bread board for Mounting ICs and Integrated circuit chips ( IC 7404 – NOT Gate, IC 7408 – AND Gate, IC 7432 – OR gate, IC 7400 – NAND Gate, IC 7402 – NOR Gate)
4 SETS
5
TOTAL MARKS -- -- -- 50
I. (c) I & II SEMESTER – ENGINEERING CHEMISTRY – I & II PRACTICAL [ “L” SCHEME ]
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)Non-Consumable Items:
1. Indane gas Connection (DBC) 1 52. Exhaust Fan (High capacity) 1 53. Fire Extinguisher 1 54. First Aid Box (Full set) 2 55. Safety chart 1 56. Chemical Balance 1 5
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 26
7. Fractional weight box 1 58. PH meters 5 59. Working Table with accessories 8 5
Glassware and Other Items :1. Burette 50ml 35 52. Pipette 20ml (with safety bulb) 35 53. Conical Flask 250ml 35 54. Funnel 3” (Polythene) 50 55. Porcelain Tile 6x6” 35 56. Measuring Cylinder 100ml 5 57. Measuring Cylinder 500ml 3 58. Reagent Bottle (White) 250ml 60 59. Reagent Bottle (White) 125ml 100 5
10. Reagent Bottle (Amber) 250ml 80 511. Test tubes 15 x 1.5 mm 1000 512. Test tubes 15 x 2.5 mm 500 513. Test tube stand 35 514. Test tube holder 35 515. Test tube cleaning brush 35 516. Glass Trough 5 517. Beakers 1000 ml 5 518. Beakers 500 ml 5 519. Beakers 250 ml 35 520. Beakers 100 ml 5 521. Glass Rods 15cm 100 522. Watch Glass 3” 35 523. Wash Bottle (Polythene) 1000 ml 35 524. Nickel Spatula 10 525. Kipps Apparatus 1 526. Burner Nipple 30 527. Bunsen Burner for gas connection 30 528. Wire Gauge with asbestos center 15 529. Plastic Buckets (15 lts) 10 530. Tripod Stand (Iron) 30 531. Filter Paper Round sheets 1000 532. Burette stand 35 533. Standard flask 100 ml 35 534. Pipette 10ml 5 5
TOTAL MARKS -- -- -- -- 215
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 27
I. (d) SECOND SEMESTER – WORKSHOP PRACTICE [ “L” SCHEME ]
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)FITTING SECTION :
1. 4” Bench vice 30 52. 12” Flat Rough file 30 53. 12” Flat smooth file 30 54. 10” Try angular file 30 55. 8” Half round file 30 56. 8” Square file 30 57. 10” Round file 30 58. 150 mm Try square 30 59. 150 mm Steel rule 30 5
10. 6 mm Dot punch 30 511. 6 mm Center punch 30 512. Hacksaw Frame 30 513. 6” leg vice 5 514. 6 mm Prick punch 5 515. Hand shearing machine 1 516. Ball Pan ½ lbs Hammer 30 517. 6.8 mm Drill Bit 5 518. 8.5 mm Drill Bit 5 519. 10.2 mm Drill Bit 5 520. M8 tap set 5 521. M10 tap set 5 522. M12 tap set 5 523. Bench drilling machine 5 524. Deep cut Hacksaw frame 5 525. 2’ x 1 ½’ Surface plate 2 526. Scriber 30 527. Tap wrench 10 5WIRING SECTION
1. 6” Insulated handle cutting pliers 30 52. 8” Insulated handle screw driver 30 53. ¼ Pound hammer 30 54. Wire Cutter 30 5
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 28
5. 250V Line Tester 30 56. 10 cm Poker 30 57. 4” Connecting Screw driver 30 58. 2 x 1½ Wiring board 30 59. Multi meter 5 5
TOTAL MARKS -- -- -- -- 180
GENERAL [COMMON LABORATORIES]
I. (e) COMPUTER CENTRE - COMPUTERS, SOFTWARE, INTERNET AND PRINTERS
FOR COMPUTER APPLICATIONS PRACTICAL, COMPUTER CENTRE FACILITIES CAN BE UTILISED
S.No Computer Facilities
Req
uire
d
Ava
ilabl
e
Shor
tfall
Max
imum
M
arks
Secured MarksMax.Marks x Available
Requiredé ùê úë û
AICTE NORMS
1. Computers [S] - 10Total Sanctioned intake ÷ 6
[One Computer for every 6 students]
2.
Multimedia Computers – Library / Internet Surfing in Reading room
02 1% of Total Students Intake[Max. 10]
3.Computers -For Faculty Members 02
4.Computers -For Administrative Office
02
Exclusive - along with LAN and Internet over and above the
requirement meant for students
5. Printers [P] 05 One Printer for every 10 required number of computers
6. Internet Facility 05£ => =
S.I. 240 1MbpsS.I. 240 2 Mbps
S.I. – Sanctioned Intake7. LAN Facility 05 All
8. Legal System Software 02 03
9.
Legal Application Software including MS Office / Open Office
05 20
10. UPS – 10 KVA 02 01
TOTAL MARKS : 40
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 29
I. (f) GENERAL [COMMON] – COMMUNICATION AND LIFE SKILL PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. An echo-free room 1 No. --- -- -- --2. Furniture / Chairs 30 103. Public Address System 1 No. 104. A minimum of two Computers
with internet access, with Audio for Listening Skill and related software packages
2 Nos 10
5. Headphone units – 30 Nos. with one control unit with a facility to play and record in Computer
As reqd.
10
6. Minimum of Three Mikes with and without cords
3+3 nos
06
7. Colour TV (min.size – 29”). 1 No. 058. DVD/VCD Player with Home
Theatre speakers1 set 05
9. Clip Chart, white/smart board 1 each
04
10. Projector. 1 No. 0211. Video camera 1 No. 0212. Printer, Xerox, scanner m/c 1
each06
13. English Dailies / Weeklies / monthlies / journals like ELTOI
Adeq. 03
14. Frozen thoughts –monthly journal for Life skills by Mr.Rangarajan
Adeq. 02
TOTAL MARKS: -- -- -- -- 75
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 30
I. CIVIL ENGINEERINGII (a). CIVIL - THIRD SEMESTER – MATERIAL TESTING LAB PRACTICE I
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Universal Testing Machine (20 to
40 t capacity) 1 No. 10
2. Compression Testing M/C. (50 to 100 t capacity)
1 No. 10
3. Torsion Testing Machine (To test mild steel bars of 12 to 16mm dia)
1 No. 10
4. Brinell Hardness Testing m/c 1 No. 105. Rockwell’s Hardness Testing M/C 1 No. 106. Izod/Charpy Impact Testing
Machine 1 No. 10
7. Tile Flexure Testing Machine 1 No. 108. Deflection Test Apparatus with
Deflectometer 1 No. 10
9. Blaine Air Permeability Apparatus 1 No. 1010. Vicat Apparatus with accessories
(moulds, plunger, needles) 2 No. 20
11. Cement Autoclave Apparatus with accessories
1 No. 10
12. Water measuring jars 4 No. 413. Stop Watches 4 No. 414. Vernier Calipers 4 No. 415. Steel Scales- 1 metre length 4 No. 416. Steel Scales- 30 or 50 cm length 4 No. 417. Dial Gauges/ Compresso meter
with stands 2 No. 2
18. Electronic Weighing Balances (5kg)
2 No. 2
19. Electric Oven/ Hot Plate 1 No. 220. Trowels of different sizes 4 No. 421. Steel Trays / Pans 4 No. 422. Steel Buckets / Containers 2 No. 223. Steel/ Plastic Mugs 2 No. 224. China Clay Discs 4 No. 425. Steel Hammer / Steel Punch 1 Set 226. Extenso meter/Strain Gauge 1 No. 227. Strain Recording Instrument 1 No. 2
TOTAL MARKS: -- -- -- -- 168
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 31
II (b). CIVIL - THIRD SEMESTER – SURVEYING PRACTICE I
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Chain with arrows 6 No. 122. Tape 6 No. 123. Ranging rod 6 No. 124. Cross – Staff 6 No. 125. Prismatic Compass 6 No. 126. Dumpy Level 10 No. 107. Levelling Staff 10 No. 108. Hand held GPS 6 No. 24
TOTAL MARKS: -- -- -- -- 104
II. (c). CIVIL - FOURTH SEMESTER – MATERIAL TESTING LAB II
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Deval’s Attrition Testing m/c 1 No. 102. Dorry’s Abrasion Testing m/c 1 No. 103. Aggregate Impact Testing
Machine 1 No. 10
4. Compression Testing Machine (Available in M.T.Lab I may be used)
1 No. 10
5. I.S.Sieves (All sizes) as per the test requirements of I S code
1 Set 02
6. Pycnometer 2 No. 107. Standard Liquid Limit Apparatus 1 No. 108. Sand Pouring Cylinder 1 No. 109. Cylindrical Core Cutter 1 No. 10
10. Proctor Compaction Apparatus with accessories
1 No. 10
11. Direct Shear Apparatus with Shear Box assembly
1 No. 10
12. Jackson Candle Turbidity meter with Candle
1 No. 10
13. Imhoff Cone Apparatus 1 No. 1014. Weighing M/C. (50/100kg) 1 No. 10
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 32
15. Digital Balances (5/10 kg) 4 No. 0816. Electric Oven / Hot Plate 1 No. 1017. Water measuring jars 6 No. 1218. Water Bath 1 No. 1019. Stop Watches 4 No. 0820. Steel Trays / Pans 6 No. 1221. Steel Buckets 4 No. 0822. Cylindrical Steel Containers (2 or
3 Litres) 2 No. 04
23. Trowels of different sizes 6 No. 1224. Steel Scales (50cm/30cm) 4 No. 0825. Glass plates 6 No. 1226. China Clay Discs 6 No. 1227. Steel / Plastic Mugs 6 No. 12
TOTAL MARKS: -- -- -- -- 260
II. (d). CIVIL - FOURTH SEMESTER – SURVEYING PRACTICE II
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Vernier Theodolite 10 Nos 102. Total Station 3 Nos 10
TOTAL MARKS: -- -- -- -- 20
II (e). CIVIL - FOURTH SEMESTER – CAD IN CIVIL ENGINEERING DRAWING
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Software – [like AutoCAD] 30 license 102. Desktop Computer System
with latest configuration30 Nos 20
3. Power Backup (UPS) 10 KVA 104. Laser Printer 2 Nos 08
TOTAL MARKS: -- -- -- -- 48
II (f). CIVIL - THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 33
III. MECHANICAL ENGINEERING
III (a). MECHANICAL - THIRD SEMESTER - MECHANICAL TESTING & QUALITY CONTROL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. UTM 1 102. Rockwell’s Hardness Testing
Machine1 10
3. Torsion testing machine 1 104. Deflection testing
arrangement1 10
5. Impact testing machine 1 106. Tension testing
arrangements1 05
7. Shear testing machine 1 058. Vernier calliper 2 059. Metallurgical Microscope 6 0610. Sample Specimen for
ferrous & non- ferrous (Identification)
6 EACH 12
11. For LPTa) Dieb) Cleanerc) Developer
2 no’s4 no’s4 no’s
040808
12. Magnetic particle test equipment
2 no’s 10
13. Belt polishing machine 1 0514. Lapping machine 1 0515. Sample Specimen 10 no’s 10
TOTAL MARKS: -- -- -- -- 133
III (b). MECHANICAL - THIRD SEMESTER – FLUID POWER PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. The Bernoulli’s Apparatus 1 no. 05
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 34
2. An Open tank fitted with a samlla orifice (or) an external mouth piece and a collecting tank with Piezometer
1 no. 05
3. A Centrifugal pump having the discharge line with venturimeter or orifice meter arrangement
1 no. 05
4. An arrangement to find friction factor
1 no. 05
5. A reciprocating pump with an arrangement for collecting data to find out the efficiency and plot the characteristics curves
1 no. 05
6. A centrifugal pump with an arrangement for collecting tank to find out the efficiency and plot the characteristics curves
1 no. 05
7. A impulse turbine with an arrangement for calculating data to find out the efficiency – Francis or Kalpan
1 no. 05
8. A reaction turbine with an arrangement for collecting data to find out the efficiency
1 no. 05
9. Pneumatic Trainer Kit 2 no’s 1010. Hydraulics Trainer Kit 1 no. 05
TOTAL MARKS: -- -- -- -- 55
III (c). MECHANICAL - FOURTH SEMESTER – COMPUTER AIDED MACHINE DRAWING
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Personal computer (With latest
processor to suit Auto CAD)30 Nos 10
2. MS Windows OS 30 License
05
3. AutoCAD software (release 2000 or above)
30 users 05
TOTAL MARKS: -- -- -- -- 20
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 35
III (d). MECHANICAL - FOURTH SEMESTER – MANUFACTURING TECHNOLOGY - I
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)TURNING
1. Center Lathe 4 ½ ‘ Bed length
15 no’s 30
2. 4 Jaw / 3 Jaw Chucks Adequate 043. Chuck key (10x10 mm size) 15 no’s 054. Box spanner 15 no’s 055. Cutting Tool H.S.S ¼ ‘’ x ¼ ‘’
x 4 ‘’ long15 no’s 05
6. Pitch gauge 5 no’s 057. Vernier Caliper (0-25 and
25-50)5 no’s each
10
8. Micrometer, Inside and Outside(0-25 and 25-50)
5 each 10
9. Vernier Height Gauge (300mm)
1 no 05
10. Snap gauge 1 set 0511. Gear tooth Vernier 1 no 0512. Parallel Block 2 nos 0513. Steel Rule (0-150) 15 nos 0514. Outside and Inside Calipers 15 each 0515. Thread gauge 5 nos 0516. Bevel Protractor 1no 0517. Jenny Caliper 5 nos 0518. Dial Gauge with Magnetic
Stand 5 nos 05
19. Marking Gauge 10 nos 0520. Safety Glass 15 nos 05
WELDING1. Arc welding booth, with oil /
air cooled welding transformer with accessories
2 No’s 10
2. Gas welding unit (Oxygen and acetylene cylinder)
1 set 05
3. Flux 500 gms 024. Electrode 10 SWG 200 no’s 105. Face shield 3 no’s 03
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 36
6. Gas welding goggles 2 no’s 027. Leather Glows 18’’ 4 set 048. Flux chipping hammer 4 no’s 049. Spot welding machine 1 no 05
FOUNDRY1. Crucible furnace 1 no 052. Tilting furnace 1 no 053. Shovel 20 nos 054. Rammer set 30 nos 055. Slick 30 nos 056. Strike-off bar 30 nos 057. Riddle 15 nos 058. Trowl 30 nos 059. Lifter 30 nos 05
10. Sprue pin 60 nos 0511. Brush 20 nos 0512. Vent rod 30 nos 0513. Draw spike 30 nos 0514. Gate cutter 30 nos 0515. Cope box 30 nos 0516. Drag box 30 nos 0517. Core box 10 nos 0518. Runner & riser 60 nos 0519. Moulding board 30 nos 0520. Patterns 15 each 05
TOTAL MARKS: -- -- -- -- 284
III (e). MECH. - IV SEM. – METROLOGY & MEASUREMENT AND MACHINE TOOL TESTING
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Vernier caliper 0.02mm
accuracy6 06
2. Micrometer 0.01mm accuracy
3 03
3. Vernier Height gauge 0.02mm accuracy
1 05
4. Sine Bar 2 02
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 37
5. Slip Gauge 2 026. Inside Micrometer 0.01mm
accuracy3 03
7. Bevel protractor 2 028. Gear Tooth Vernier caliper 2 029. Thread Micrometer 0.01mm
accuracy2 02
10. Pitch gauge mm & inch set 2 each 0411. Digital Micrometer 0.001mm
accuracy2 02
12. Vernier Depth gauge 2 0213. Sample Specimen as
required -- -- -- --
14. Magnetic stand with dial indicator
6 06
15. Straight edge 2 0416. Squares 2 0417. Split level 6 0618. Test Mandrels for each
machinesAdeq. -- -- -- --
TOTAL MARKS: -- -- -- -- 55
III (f). MECHANICAL - FOURTH SEMESTER – ELECTRICAL DRIVES AND CONTROL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)ELECTRICAL LAB
1. DC ammeter 0-5A 1 no 012. DC ammeter 0-25A 1 no 013. DC voltmeter 0-30V 1 no 014. DC voltmeter 0-300V 1 no 015. Rheostat 10.8 ,8.5A 1 no 016. AC ammeter 0-5A 1 no 017. AC ammeter 0-10A 2 nos 028. AC voltmeter 0-50V 3 nos 039. AC wattmeter 5A-10A (0-
750W, 0-600V) 3 nos 03
10. Loading rheostat 5A,230V 1 no 0111. Tachometer (Analog Type)
0-1000 rpm1 no 01
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 38
12. Variac (Auto Transformer) 20A, 250V
2 nos 02
13. 3 point starter 20A, 220V 1 no 0114. Dol starter 16A, 415V 1 no 0115. Star /Delta starter 20A,600V 1 no 0116. Over load relay 1 to 2.5A 1 no 0117. Air break contactors 20A, 220V 4 nos 0418. Push button 2A ,220V 2 nos 0219. Limit switch 20A,220V 1 no 0120. MCB 20A single pole 1 no 0121. MCB 20A double pole 1 no 0122. ELCB 2pole 20A,100mA 1 no 0123. ELCB 4POLE 20A,100mA 1 no 01
ELECTRONICS LAB1. Transformer 230/ 9-0-9V, 1A 4 nos 042. Resistor 1 K/ ½ W 3 nos 033. Capacitor 1000 F/25V 4 nos 044. IC 7805 1 no 015. Logic Gates IC 7400, 7408,
7432, 7404, 7402, 7486each 1 no 01
6. Stepper Motor Drive kit 1 no 017. Servo Motor Drive Kit 1 no 018. SMPS Trainer Kit 1 no 019. UPS Trainer Kit 1 no 01
10. Inverter Kit 1 no 0111. Digital Multimeter 1 no 0112. LED 7 Segment Laser Diode 1 each 01
TOTAL MARKS: -- -- -- -- 53
III (g). MECHANICAL - THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 39
IV. ELECTRICAL AND ELECTRONICS ENGINEERINGIV (a). EEE - THIRD SEMESTER – ELECTRICAL CIRCUITS AND MACHINES PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. DC Shunt Motor 3 / 5 KW
(or more) with loading arrangement
1 05
2. DC Series Motor 3 / 5 KW (or more) with loading arrangement
1 05
3. DC Compound Motor 3 / 5 KW (or more) with loading arrangement
1 05
4. DC Shunt Generator 3 / 5 KW (or more) coupled with Prime Mover
1 05
5. DC Series Generator 3 / 5 KW (or more) coupled with Prime Mover
1 05
6. 1 phase Transformer 1KVA (or more) 220V/110V
3 15
7. 3 phase Transformer 1 KVA (or more) 440V/220V
1 06
8. 1 phase Variac 15 Amps 3 159. 3 phase Variac 15 Amps 1 06
10. Loading Rheostat 220V, 30A, Single phase loading Rheostat
2 10
11. Tachometer Analog type 2 1012. Tachometer Digital 1 0613. 3 point / 4 point starter 6 1214. Rheostat – various ranges
50Ω-100Ω,1300Ω-600Ω10 10
15. DC Ammeter- various ranger 0-1,0-2,0-15,0-30 Amps
10 10
16. DC Voltmeter- various ranges 0-75V,0-150V, 0-300V,0-600V
10 10
17. Wattmeter-various ranges LPF 75/150/300/600 Volts
2 10
18. Wattmeter-various ranges UPF 75/150/300/600 Volts
2 10
TOTAL MARKS: -- -- -- -- 155
IV (b). EEE - THIRD SEMESTER – ELECTRONIC DEVICES AND CIRCUITS PRACTICAL
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 40
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. DC Regulated power supply
(0-30V, 1A)10 20
2. High Voltage Power Supply (0-250V, 1A)
2 10
3. Signal Generator (1MHz) 4 204. Dual trace CRO (20 MHz /
30MHz)5 30
5. Digital Multi meter 10 106. DC Voltmeter (Analog)
(Different Range)15 15
7. DC Ammeter (Analog) (Different Range)
15 15
TOTAL MARKS: -- -- -- -- 120
IV (c). EEE - FOURTH SEMESTER – ELECTRICAL MACHINES AND INSTRUMENTATION
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Synchronous Motor 3 / 5 HP
(or more)1 05
2. 3 Phase Squirrel cage Induction motor 5 HP 440V/20A
1 05
3. 1 phase Induction motor 1 HP 230V/0.5A
1 10
4. 3 phase Slip ring Induction motor 5HP 440V/20A
1 10
5. AC Ammeter (0-2)A 2 106. AC Ammeter (0-15)A 2 107. AC Ammeter (0-10)A 2 108. AC Ammeter (0-5)A 5 109. DC Ammeter (0-2)A 3 06
10. AC Voltmeter (0-300)V 3 0611. AC Voltmeter(0-600)V 6 1212. Wattmeter (0-24)V,5A,10A 3 0613. Wattmeter (0-60)V,5A,10A 7 1414. Wattmeter (0-750)W
wattmeter multi range 1500W-10A,3000W-
1 05
15. Wheatstone bridge 2 10
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 41
16. Anderson Bridge 2 1017. Schering Bridge 2 1018. 1 Phase Energy meter
Calibration Induction Type1 05
19. 3 Phase Energy meter Calibration Induction Type
1 05
20. Earth Resistance Kit 2 1021. LVDT Kit to measure
Displacement2 10
22. Load Cell calibration various Load arrangement
2 10
23. Alternator 1 phase 1 0524. Alternator 3 phase 1 0525. Tachometer Analog type 2 1026. Tachometer Digital 1 0127. Synchroscope 1 0528. Frequency meter 2 1029. PF meter (paver factor
meter)2 10
30. Single phase R.S.S meter 1 0431. 3 phase R.S.S meter 1 06
TOTAL MARKS: -- -- -- -- 245
IV (d). EEE - IV SEMESTER - DIGITAL ELECTRONICS AND LINEAR INTEGRATED CIRCUITS
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. IC trainer Kits 10 302. Function Generator 2 203. 0-30V power supply 2 104. 20MHz CRO 2 20
TOTAL MARKS: -- -- -- -- 80
IV (e). EEE - THIRD SEMESTER – WORKSHOP PRACTICAL LATHE AND WELDING
MECHANICAL – MANUFACTURING TECHNOLOGY – I CAN BE UTILISED
IV (f). EEE - THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
IV (g). EEE - FOURTH SEMESTER – COMMUNICATION AND LIFE SKILL PRACTICAL
COMMUNICATION AND LIFE SKILL PRACTICAL - GENERAL [COMMON] CAN BE UTLISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 42
V. ELECTRONICS AND COMMUNICATION ENGINEERING
V (a). ECE - THIRD SEMESTER – ELECTRONIC DEVICES AND CIRCUITS PRACTICAL
S.No List of Equipment
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. DC Regulated power supply (0-
30V, 1A)10 20
2. High Voltage Power Supply (0-250V, 1A)
2 10
3. Signal Generator (1MHz) 4 204. Dual trace CRO (20 MHz/ 30MHz) 5 305. Digital Multi meter 10 106. DC Voltmeter (Analog)(Diff.Range) 15 157. DC Ammeter (Analog) (Diff.Range) 15 15
TOTAL MARKS: -- -- -- -- 120
V (b). ECE - THIRD SEMESTER – ELECTRICAL CIRCUITS AND INSTRUMENTATION
S.No List of Equipment
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Se
ctio
n 10
abo
ve)
(1) (2) (3) (4) (5) (6) (7) (8)1. Regulated power supply (0-30V, 1A) 8 242. Dual trace CRO (20MHz) 4 123. Signal Generator (1MHz) 3 094. Voltmeter (0 – 15 volts) 8 245. Ammeter (0 – 15 mA) 6 186. Digital Multi meter 4 127. Ammeter (0 – 100 mA) 8 248. Galvanometer 1 029. Decade resistance box 1 01
TOTAL MARKS: -- -- -- -- 126
V (c). ECE - THIRD SEMESTER – PROGRAMMING IN C
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 43
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Desktop Computers 36 nos 1082. Laser Printer 4 nos 163. C – Compiler with Editor 36 License 30
TOTAL MARKS: -- -- -- -- 154
V (d). ECE - IV SEMESTER – INDUSTRIAL ELECTRONICS AND COMMUNICATION ENGG.
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Regulated power supply (0-30V) 5 402. Dual trace CRO 2 163. Signal Generator 2 164. PAM Kit 1 085. PWM Kit 1 086. PPM Kit 1 087. PCM Kit 1 088. PLC 2 16
TOTAL MARKS: -- -- -- -- 120
V (e). ECE - FOURTH SEMESTER – INTEGRATED CIRCUITS PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. IC trainer Kits 10 302. Function Generator 2 20
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 44
3. 0-30V power supply 2 104. 20MHz CRO 2 20
TOTAL MARKS: -- -- -- -- 80
V (f). ECE - THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
V (g). ECE - FOURTH SEMESTER – COMMUNICATION AND LIFE SKILL PRACTICAL
COMMUNICATION AND LIFE SKILL PRACTICAL - GENERAL [COMMON] CAN BE UTLISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 45
VI. COMPUTER ENGINEERING
VI (a). COMPUTER ENGG. - THIRD SEMESTER – ELECTRICAL AND ELECTRONICS LAB
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Digital Multimeter 6 122. Ammeter (0-50) mA 6 123. Voltmeter (0-20) V, (0-1v) 6 + 6 124. Power supply 0-30V 6 125. Digital Trainer Kit 6 126. Bread Board 6 127. Fixed Dual Power Supply
0-15 V2 04
8. Signal generator 1 MHz 2 049. CRO Dual Trace 30 MHz 6 12
10. Single Phase Transformer 2 04COMPONENTSResistors (150Ω, 1KΩ, 2.2KΩ, 10KΩ, 2 20Ω)
Adeq. 10
Capacitor (10µF, 4.7µF) Adeq. 02PN Diode (IN4007) Adeq. 02Zener Diode (Z11.1) Adeq. 02Transistor (SL100, CL100) Adeq. 02IC7400, IC7402, IC7404, IC7408, IC7432, IC7486
Adeq. 06
IC74161 (Counter) Adeq. 01IC74153 (MUX) Adeq. 01IC74139 (DMUX) Adeq. 01IC7476 (Flip-Flop) Adeq. 01IC74194 (Shift Register) Adeq. 01
TOTAL MARKS: -- -- -- -- 125
VI (b). COMPUTER ENGG. – THIRD SEMESTER – LINUX PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Server [LINUX] 1 No. 152. Desktop Computers 36 Nos 1083. Laser Printer 4 Nos 16
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 46
4. LINUX Server OS 1 no 105. Linux Client OS 36 Nos 18
TOTAL MARKS: -- -- -- -- 167
VI (c). COMPUTER ENGG. – THIRD SEMESTER – C PROGRAMMING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Desktop Computers 36 Nos 1082. Laser Printer 4 Nos 163. C – Compiler with Editor 36 License 30
TOTAL MARKS: -- -- -- -- 154
VI (d). COMPUTER ENGG. – FOURTH SEMESTER – JAVA PROGRAMMING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Desktop Computers 36 Nos 1082. Laser Printer 4 Nos 163. JDK 1.3 or JDK 1.4 36 Nos 30
TOTAL MARKS: -- -- -- -- 154
VI (e). COMPUTER ENGG. – THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
VI (f). COMPUTER ENGG. – FOURTH SEMESTER – DATA STRUCTURES USING C LAB
COMPUTER ENGG. – THIRD SEMESTER – C PROGRAMMING PRACTICAL CAN BE UTILISED
VI (g). COMPUTER ENGG. – FOURTH SEMESTER – COMMUNICATION AND LIFE SKILL LAB
COMMUNICATION AND LIFE SKILL PRACTICAL - GENERAL [COMMON] CAN BE UTLISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 47
VII. INFORMATION TECHNOLOGY
VII (a). IT - THIRD SEMESTER – ELECTRICAL AND ELECTRONICS LAB
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Digital Multimeter 6 122. Ammeter (0-50) mA 6 123. Voltmeter (0-20) V, (0-1v) 6 + 6 124. Power supply 0-30V 6 125. Digital Trainer Kit 6 126. Bread Board 6 127. Fixed Dual Power Supply
0-15 V2 04
8. Signal generator 1 MHz 2 049. CRO Dual Trace 30 MHz 6 12
10. Single Phase Transformer 2 04COMPONENTSResistors (150Ω, 1KΩ, 2.2KΩ, 10KΩ, 2 20Ω)
10
Capacitor (10µF, 4.7µF) 02PN Diode (IN4007) 02Zener Diode (Z11.1) 02Transistor (SL100, CL100) 02IC7400, IC7402, IC7404, IC7408, IC7432, IC7486
06
IC74161 (Counter) 01IC74153 (MUX) 01IC74139 (DMUX) 01IC7476 (Flip-Flop) 01IC74194 (Shift Register) 01
TOTAL MARKS: -- -- -- -- 125
VII (b). IT – THIRD SEMESTER – LINUX PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t N
OT
in w
orki
ng
cond
ition
RA
TIO
=
Max
imum
M
arks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Se
ctio
n 10
abo
ve)
(1) (2) (3) (4) (5) (6) (7) (8)1. Server [LINUX] 1 No. 152. Desktop Computers 36 Nos 1083. Laser Printer 4 Nos 164. LINUX Server OS 1 no 105. Linux Client OS 36 Nos 18
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 48
TOTAL MARKS: -- -- -- -- 167
VII (c). IT – THIRD SEMESTER – C PROGRAMMING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Desktop Computers 36 Nos 1082. Laser Printer 4 Nos 163. C – Compiler with Editor 36 License 30
TOTAL MARKS: -- -- -- -- 154
VII (d). IT – FOURTH SEMESTER – JAVA PROGRAMMING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Desktop Computers 36 Nos 1082. Laser Printer 4 Nos 163. JDK 1.3 or JDK 1.4 36 Nos 30
TOTAL MARKS: -- -- -- -- 154
VII (e). IT – THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
VII (f). IT – FOURTH SEMESTER – DATA STRUCTURES USING C LABIT – THIRD SEMESTER – C PROGRAMMING PRACTICAL CAN BE UTILISED
VII (g). IT – FOURTH SEMESTER – COMMUNICATION AND LIFE SKILL LABCOMMUNICATION AND LIFE SKILL PRACTICAL - GENERAL [COMMON] CAN BE UTLISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 49
VIII. AUTOMOBILE ENGINEERING
VIII (a). AUTOMOBILE - THIRD SEMESTER – MECHANICAL TESTING & QUALITY CONTROL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. UTM 1 102. Rockwell’s Hardness Testing
Machine1 10
3. Torsion testing machine 1 104. Deflection testing
arrangement1 10
5. Impact testing machine 1 106. Tension testing
arrangements1 05
7. Shear testing machine 1 058. Vernier calliper 2 059. Metallurgical Microscope 6 06
10. Sample Specimen for ferrous & non- ferrous (Identification)
6 EACH12
11. For LPTa) Dieb) Cleanerc) Developer
2 no’s4 no’s4 no’s
040808
12. Magnetic particle test equipment
2 no’s 10
13. Belt polishing machine 1 0514. Lapping machine 1 0515. Sample Specimen 10 no’s 10
TOTAL MARKS: -- -- -- -- 133
VIII (b). AUTOMOBILE - THIRD SEMESTER – AUTOMOBILE CHASSIS AND TRANSMISSION
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 50
1. Valcanizing kit 2 nos 202. Four Wheel alignment kit 1 no 103. Wheel balancing device 1 no 104. Mechanical / Hydraulic
Press1 no 10
5. Hydraulic brake system fixed in the frame
1 no 10
6. Screw jack / Hydraulic jack 2 nos 207. Hoist 2 nos 208. Trolley 2 nos 209. Spanners & Tools 6 sets 30
TOTAL MARKS: -- -- -- -- 150
VIII (c). AUTOMOBILE - FOURTH SEMESTER – COMPUTER AIDED MACHINE DRAWING
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Personal computer (With latest
processor to suit Auto CAD)30 Nos 10
2. MS Windows OS 30 Nos 053. AutoCAD software (release
2000 or above)30 users 05
TOTAL MARKS: -- -- -- -- 20
VIII (d). AUTOMOBILE - FOURTH SEMESTER – HEAT POWER ENGINEERING PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Model for Port timing diagram /
Valve timing diagramEach 1
no20
2. Open cup apparatus and Closed cup apparatus
Each 1 no
20
3. Say bolt viscometer 1 no 104. Red wood viscometer 1 no 105. Bomb Calorimeter 1 no 10
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 51
6. Petrol engine test rig to conduct load test
1 no 20
7. Diesel engine test rig to conduct load test
1 no 20
8. Multi cylinder Petrol or Diesel engine.
1 no 20
9. Petrol / Diesel Engine test rig to find heat balance sheet.
1 no 10
10. Exhaust gas analyzer. 1 no 0611. Smoke meter. 1 no 06
TOTAL MARKS: -- -- -- -- 152
VIII (e). AUTOMOBILE - FOURTH SEMESTER – INDUSTRIAL AUTOMATION PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Pneumatic trainer kit 2 nos 402. Air compressor 1 no 103. Hydraulic trainer kit with
hydraulic power pack2 nos 40
4. Programmable logic controller
2 nos 40
5. Boards to fix the component Min. 6 nos 066. Sufficient Pneumatic and
Hydraulic components.Adeq. 09
TOTAL MARKS: -- -- -- -- 145
VIII (f). AUTOMOBILE -THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
VIII (g). AUTOMOBILE - FOURTH SEMESTER – MANUFACTURING TECHNOLOGY - I LAB
MECHANICAL – IV SEM. – MANUFACTURING TECHNOLOGY-I CAN BE UTILISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 52
IX. MARINE ENGINEERING
IX (a). MARINE - THIRD SEMESTER – STRENGTH OF MATERIALS AND FLUID MECHANICS
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Universal Testing Machine 1 102. Brinell Hardness Testing
Machine1 10
3. Torsion testing machine 1 104. Deflection testing arrangement 1 10
5. Tension testing arrangements 1 10
6. Impact testing machine 1 107. Shear testing machine 1 108. The Bernoulli’s Apparatus 1 059. Venturimeter / Orifice meter
arrangement1 05
10. An arrangement to find friction factor
1 05
11. Reciprocating pump 1 0512. Centrifugal pump 1 0513. Impulse turbine 1 0514. An open tank fitted with a
orifice / an external mouthpiece and a collecting tank with Piezometer
1 05
15. Either Pneumatic trainer kit with air compressor (or) Hydraulic trainer kit with hydraulic power pack
1 05
TOTAL MARKS: -- -- -- -- 110
IX (b). MARINE - THIRD SEMESTER – SHIP CONSTRUCTION TECHNOLOGY PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 53
(1) (2) (3) (4) (5) (6) (7) (8)1. 300 Amps welding transformer
with accessories 2 100
2. Sheet bending machine 1 343. Sheet cutting machine 1 33
TOTAL MARKS: -- -- -- -- 167
IX (c). MARINE - FOURTH SEMESTER – WORKSHOP TECHNOLOGY II PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Surface grinding machine 1 502. Milling M/C 2 1003. Drilling M/C 2 100
TOTAL MARKS: -- -- -- -- 250
IX (d). MARINE - FOURTH SEMESTER – COMPUTER AIDED MARINE ENGINEERING DRAWING
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Se
ctio
n 10
abo
ve)
(1) (2) (3) (4) (5) (6) (7) (8)1. Personal computer (With latest
processor to suit Auto CAD)30 nos 10
2. MS Windows OS 30 nos 053. AutoCAD software (release
2000 or above)30
License05
TOTAL MARKS: -- -- -- -- 20
IX (e). MARINE - FOURTH SEMESTER – ELECTRICAL DRIVES AND CONTROL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Se
ctio
n 10
abo
ve)
(1) (2) (3) (4) (5) (6) (7) (8)ELECTRICAL LAB
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 54
1. DC ammeter 0-5A 1 no 012. DC ammeter 0-25A 1 no 013. DC voltmeter 0-30V 1 no 014. DC voltmeter 0-300V 1 no 015. Rheostat 10.8 ,8.5A 1 no 016. AC ammeter 0-5A 1 no 017. AC ammeter 0-10A 2 nos 028. AC voltmeter 0-50V 3 nos 039. AC wattmeter 5A-10A
(0-750W, 0-600V) 3 nos 03
10. Loading rheostat 5A,230V 1 no 0111. Tachometer-Analog 0-1000
rpm1 no 01
12. Variac (Auto Transformer) 20A, 250V
2 nos 02
13. 3 point starter 20A, 220V 1 no 0114. Dol starter 16A, 415V 1 no 0115. Star /Delta starter 20A,600V 1 no 0116. Over load relay 1 to 2.5A 1 no 0117. Air break contactors 20A, 220V 4 nos 0418. Push button 2A ,220V 2 nos 0219. Limit switch 20A,220V 1 no 0120. MCB 20A single pole 1 no 0121. MCB 20A double pole 1 no 0122. ELCB 2pole 20A,100mA 1 no 0123. ELCB 4POLE 20A,100mA 1 no 01
ELECTRONICS LAB1. Transformer 230/ 9-0-9V, 1A 4 nos 042. Resistor 1 K/ ½ W 3 nos 033. Capacitor 1000 F/25V 4 nos 044. IC 7805 1 no 015. Logic Gates IC 7400, 7408,
7432, 7404, 7402, 7486each 1
no01
6. Stepper Motor Drive kit 1 no 017. Servo Motor Drive Kit 1 no 018. SMPS Trainer Kit 1 no 019. UPS Trainer Kit 1 no 01
10. Inverter Kit 1 no 0111. Digital Multimeter 1 no 0112. LED 7Segment Laser Diode 1 each 01
TOTAL MARKS: -- -- -- -- 53
IX (f). MARINE - THIRD SEMESTER – WORKSHOP TECHNOLOGY – I PRACTICAL MECHANICAL – IV SEM. – MANUFACTURING TECHNOLOGY-I CAN BE UTILISED
IX (g). MARINE - THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
COMPUTER CENTRE - GENERAL [COMMON LABORATORIES] CAN BE UTILISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 55
X. MECHATRONICSX (a). MECHATRONICS - THIRD SEMESTER – ELECTRONIC DEVICES AND CIRCUITS
PRACTICAL
S.No
List of Equipments
Qua
ntity
Req
uire
d
Qua
ntity
Ava
ilabl
e
No.
of E
quip
men
t N
OT
in w
orki
ng
cond
ition
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Dual Power Supply 0-15V 10 202. High Voltage Power Supply 0-
250v2 20
3. Signal Generator 1 MHz 10 204. Dual Trace CRO 20 MHz & 60
MHz5 + 5 20
5. Transformer 12-0-12V 5 106. Digital Multi meter 10 10
TOTAL MARKS: 100
X (b). MECHATRONICS - THIRD SEMESTER – ELECTRICAL CIRCUITS AND MACHINES PRACTICAL
S.No
List of Equipments
Qua
ntity
Req
uire
d
Qua
ntity
Ava
ilabl
e
No.
of E
quip
men
t N
OT
in w
orki
ng
cond
ition
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. REGULATED POWER SUPPLY
(0-30V)4 Nos 40
2. AUDIO OSCILLATOR 1 No. 203. SINGLE PHASE
TRANSFORMER2 Nos 20
4. AUTOTRANSFORMER 2 Nos 20TOTAL MARKS: 100
X (c). MECHATRONICS - THIRD SEMESTER – MANUFACTURING TECHNOLOGY PRACTICAL
S.No
List of Equipments
Qua
ntity
Req
uire
d
Qua
ntity
Ava
ilabl
e
No.
of E
quip
men
t N
OT
in w
orki
ng
cond
ition
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. Lathe 15 No s 152. Milling machine 3 No s 153. Cylindrical grinding machine 1No 254. Surface grinding machine 1 No 155. Tool and cutter grinding
machine 1 No 15
6. Shaper 2 No s 15TOTAL MARKS: 100
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 56
X (d). MECHATRONICS - THIRD SEMESTER – COMPUTER APPLICATIONS PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)GENERAL [COMMON LABORATORIES] – CAN BE UTILISED
X (e). MECHATRONICS - FOURTH SEMESTER – ANALOG AND DIGITAL ELECTRONICS PRACTICAL
S.No
List of Equipments
Qua
ntity
Req
uire
d
Qua
ntity
Ava
ilabl
e
No.
of E
quip
men
t N
OT
in w
orki
ng
cond
ition
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)1. IC TRAINER WITH POWER
SUPPLY FACILITY10 30
2. CATHODE RAY OSCILLOSCOPE
1 303. AUDIO OSCILLATOR 1 40
TOTAL MARKS: 100
X (f). MECHATRONICS - FOURTH SEMESTER – PROGRAMMING IN C PRACTICAL
S.No List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
Mar
ks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Sec
tion
10 a
bove
)
(1) (2) (3) (4) (5) (6) (7) (8)HARDWARE REQUIREMENT
1. Desktop Computers 36 Nos. 302. Laser Printer 4 Nos 30
SOFTWARE REQUIREMENT1. C-Compiler with Editor 40
TOTAL 100
X (g). MECHATRONICS - FOURTH SEMESTER – COMMUNICATION AND LIFE SKILLS PRACTICAL
S.No
List of Equipments
Qua
ntity
R
equi
red
Qua
ntity
A
vaila
ble
No.
of
Equi
pmen
t NO
T in
wor
king
co
nditi
on
RA
TIO
=
Max
imum
M
arks
Mar
ks S
ecur
ed(R
efer
Gui
delin
es
indi
cate
d in
Se
ctio
n 10
abo
ve)
(1) (2) (3) (4) (5) (6) (7) (8)GENERAL COMMON PRACTICAL – CAN BE UTILISED
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 57
CRITERIA AND TYPICAL EXAMPLE FOR REQUIREMENT OF FACULTY AND SUPPORTING
STAFF FOR THE FOLLOWING NUMBER OF COURSES, DIVISIONS AND INTAKE
FULL TIME – I SHIFTII YEAR I YEAR
Sanctioned intake for 2014-15
Sanctioned intake for 2015-16
No. Courses
1 Civil 60 602 Mechanical 180 1803 EEE 60 604 ECE 60 605 Automobile 60 60
TOTAL INTAKE 420 420No. of Divisions 7 7No. of Courses 5 5
TYPICAL EXAMPLE FOR REQUIREMENT OF FACULTY, LIBRARIAN & PHYSICAL DIRECTOR YEARWISE REQUIREMENT OF FACULTY
Year II Year I YearSanctioned Intake 420 420Faculty student ratio required
1:20 1:20
Faculty requirement 21 21Total faculty 42Librarian 1Physical Director 1
TYPICAL EXAMPLE FOR MINIMUM REQUIRMENT OF TECHNICAL SUPPORTING STAFF
Year REQUIREMENT OF TECHNICAL SUPPORTING STAFF
Criteria for Technical Supporting staff requirement
Workshop Instructor : 1Skilled / Lab Assistant : One Lab Assistant for each Lab [as in odd semester]Unskilled Assistant : One Assistant for each Department
TYPICAL EXAMPLE FOR MINIMUM REQUIREMENT - MINISTERIAL / ADMINISTRATIVE STAFFYear REQUIREMENT OF MINISTERIAL / ADMINISTRATIVE
STAFFCriteria for Ministerial staff As per Institutions requirement – Can be in the cadre
of Superintendent, Assistant & Typist - Minimum 3 is desired
Ministerial / Admin. Staff Minimum 3 is desired
TYPICAL EXAMPLE FOR MINIMUM REQUIREMENT OF BASIC SERVANTSYear REQUIREMENT OF BASIC SERVANTS
Criteria for Basic Servants As per Institutions requirement - Can be in the cadre
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 58
of Office Assistant, Watchman, Sweeper & Sanitary Worker - Minimum 4 is desired
Basic Servants Requirement Minimum 4 is desired
CRITERIA & TYPICAL EXAMPLE FOR REQUIRMENT OF LIBRARY BOOKS
CRITERIA AND TYPICAL EXAMPLE FOR REQUIREMENT OF TITLES OF BOOKS IN LIBRARY YEAR WISE REQUIREMENT OF TITLE OF BOOKS IN
LIBRARYYearII Year I Year
No. of Courses 5 5Criteria for requirement ofTitles of Books
25 Titles of Books for each course
50 Titles of Books Fixed for whole First year
Titles of Books 125 50Grand Total 175
CRITERIA AND TYPICAL EXAMPLE FOR REQUIREMENT OF VOLUMES OF BOOKSYEARWISE REQUIREMENT OF VOLUME OF BOOKS IN LIBRARY
Year II Year I YearNo. of Divisions 7 7Criteria for requirement ofVolumes of Books
125 Volumes of Books for each division in II Year
250 Volumes of Books for each division in I Year
Volumes of Books 875 1750Grand Total 2625
CRITERIA AND TYPICAL EXAMPLE FOR REQUIREMENT OF JOURNALS IN LIBRARYYEARWISE REQUIREMENT OF JOURNALS IN LIBRARY
Year II Year I YearNo. of Divisions 7 7Criteria for requirement ofJournals
1 Journal per division 1 Journal per division
No. of Journals 7 7Grand Total 14
NAME OF THE INSTITUTION:
Signature: MEMBER MEMBER CONVENORName & Designation with Seal: Page | 59
TYPICAL EXAMPLE FOR ACADEMIC INFRASTRUCTUREFULL TIME – I SHIFT
II YEAR I YEARSanctioned intake for 2014-15 Sanctioned intake for 2015-16
No. Courses
1 Civil 60 602 Mechanical 60 1803 EEE 60 604 ECE 60 605 Automobile 60 60
TOTAL INTAKE 300 420No. of Divisions 5 7No. of Courses 5 5
Number requiredNo
Instructional Area[RCC] II Year I Year Total
Required Area / room
in Sq.m
Area(Sq.m)
1 Class Room (0.75x Division) 5 7 9 66 5942 Tutorial Hall One fourth of number of class rooms required 3 33 993 Workshop 1 200 2003 Laboratory (2 Lab/ Course) 20 66 13204 Additional Workshop
As per AICTE norms(If Additional Workshop is available, Lab area may be reduced
accordingly) --- 200 ---
5 Computer Centre 1 100 1006 Drawing Hall 1 132 1327 Library 1 300 3008 Seminar Hall 1 132 132
No Administrative Area [RCC] Number
requiredArea/ room
in Sq.mArea
(Sq.m)1 Principal Room 1 30 302 Board Room 1 20 203 Office Room 1 150 1504 Department Office =1 Dept office of 20 Sq.m area for each course 5 20 1005 HOD cabin =1 HOD cabin of 10 Sq.m area for each course 5 10 506 Faculty room - I Yr =5 Sq.m Faculty room area for each I Year faculty 1 or more 5/faculty 1057 Faculty room - II Yr =5 Sq.m Faculty room area for each II Year faculty 1 or more 5/faculty 758 Central Stores 1 30 309 Maintenance Room 1 10 10
10 Security Room 1 10 1011 House Keeping 1 10 1012 Pantry for staff 1 10 1013 Exam Office 1 30 3014 Placement office 1 30 30
No Amenities Area [RCC] Number required
Area/ room in Sq.m
Area(Sq.m)
1 Gents Toilet 1 75 752 Ladies Toilet 1 75 753 Boys common room 1 75 754 Girls common room 1 75 755 Cafeteria 1 150 1506 Stationary Store & Reprography 1 10 107 First Aid cum Sick room 1 10 10