acoustical ceiling -...
TRANSCRIPT
Acoustical
CeilingSystems
CI/SfB (35) Xh2
About USG
World wide
USG has been a leader in the building materials industry for 100 years. Our products can be found in buildings where people live and work, in more than 125 countries throughout the world.
Headquartered in Chicago, USA, we have offices throughout the U.S., Europe, Canada, Mexico, Middle East and Asia/Pacific. With sales in excess of $5 billion, we are the world’s largest producer of gypsum wallboard and a leading manufacturer of ceiling components and systems. USG is the world’s leading manufacturer of ceiling grid – in fact, DONN brand DX grid can be found in more ceilings, world wide, than any other supplier.
Europe
USG’s European operations are based on four regional sales and manufacturingorganisations: in France (Dreux); Germany(Viersen); Russia (St. Petersburg); and United Kingdom (Peterlee). ISO 9000/BS 5750/EN 29000 programmes have been implemented in all USG European plants. Strict quality assurance procedures covering manufacturing and finished products are your guarantee of complete satisfaction.
USG sales offices throughout western and eastern Europe provide local expertise and support to an extensive distribution and sales network, ensuring that products can be delivered wherever you need them - on spec and on time.
2
Ceiling design considerations
The optimal ceiling choice satisfies several critical requirements including aesthetics, acoustical performance, fire protection and environmental factors. USG manufactures a wide variety of quality ceiling systems with strong capabilities in a range of performance categories.
Aesthetics
Acoustics
Humidity resistance
Fire resistance
Indoor Environmental Quality
Acoustical ceiling systems
BS EN 13964:2004European Standard for Suspended Ceilings
ContentsTechnical selection
Technical performance selector 4-5
USG ultra high performance ceiling tiles
Sonatone 6Ceramic Radar 7Halcyon 8Clean room 9
USG high performance ceiling tiles
Olympia II Micro 10Radar ClimaPlus 11Frost 12Glastone 13Summit 14Sandrift 15
USG standard performance ceiling tiles
Radar 16Olympia HP 17Fissured 18
USG Grid suspension systems Installing a DONN® grid system 20-21DONN® DX24 22DONN® DXB24 23DONN® DX15 24DONN® DX Fineline 25DONN® DX KB Corrosion Protected 26DONN® DX CE Controlled Environment 27DONN® DX Espace 28DONN® DX35 29DONN® DX Screw Fix 30Suspension (hanger) options 31Perimeter Trims 32-33
USG speciality ceilings
CurvaturaTM 3-D Ceiling System 34-35Compässo curved ceiling trim 36-37 Cadre Traditional 38Cadre Rosette 39Quadra Crown Coffer 40
Technical information Indoor Environmental Quality 41BS EN 13964: 2004 European Standard for suspended ceilings 42Installation and maintenance 43Custom products 43
How to use this catalogue
Ultr
a Hi
gh
Perf
orm
ance
High
Pe
rfor
man
ceSt
anda
rd
Perf
orm
ance
Susp
ensi
onsy
stem
s
This catalogue is an easy-to-use reference guide for specifying USG acoustical ceiling systems. To obtain the information you need, use one or several of the following options:
• Technical performance selector – start here if you have to meet specific requirements for acoustical, humidity or fire performance.
• Products – start here if you know the exact product you need. USG products are grouped into five key sections:
•Ultra high performance
•High performance
•Standard performance
•Suspension systems
•Speciality ceilings
USG web siteArchitects and specifiers can use USG UK's web site to find out more about a range of ceiling and wall products that perform to exacting specifica-tions. Main brand names include USG acoustical ceiling tiles, DONN® DX - the world leading brand of ceiling suspen-sion systems, and SHEETROCK® Brand gypsum joint treatment products. The site also gives you access to complete information on all USG products andservices.
Visit our website now for the latest information or to specify USG ceiling systems.
www.usg.com/europe 3
Spec
ialit
yCe
iling
s
4
Today’sbuildingdesignsrequiredemandingperformanceinmanyareasincludingfire,acoustics,humidityresistanceandhygiene.USGoffersarangeofproductsforinteriorapplications,designedtomeettheseperformancecriteria.
Technical performance selector
Page TypeHumidity ResistanceMax % RH / °C
Thermal resistance R value m2 °C/W
Acoustical Performance Fire Performance in accordance with BS 476 Technical Performance in accordance with EN 13964
Product Name NRC αW DncWFire ReactionBS 476: pt 6 & 7
Steel BeamBS 476: pt 23
Timber FloorBS 476: pt 21
Mezzanine FloorBS 476: pt 21
IEQ Benefits
Reaction to fire EN 13501-1
Release of Asbestos
Release of formaldehyde ENV 717-1 & 717-2
Exposure class EN 13964 - Table 7
EC Certificate of Conformity number
Sonatone 6 R 95/40 0.38 0.75 0.70 (MH) 38dB Class 1/0 - - - x A2-s1, d0 No content Class E1 Class C 1121 - CPD - BC0030
Ceramic Radar 7 FC 100/40 0.22 0.50 0.50 41dB non combustible** 60 mins 60 mins 60 mins A2-s1, d0 No content Class E1 Class C 1121 - CPD - BC0002
Halcyon * 8 R 95/40 0.77 0.90 0.85 32dB TBC - - - x TBC No content Class E1 Class C TBC
Clean Room 9 R 95/32 0.25 0.15 0.15 35dB Class 1/0 - - - x A2-s1, d0 No content Class E1 Class C 1121 - CPD - BC0031
Olympia II Micro 10 FC 95/32 0.25 0.60 0.55 (L) 32dB Class 1/0 60 mins - 60 mins A2-s1, d0 No content Class E1 Class C 1121 - CPD - BC0002
Radar Climaplus 11 FC 95/32 0.25 0.70 0.70 31dB Class 1/0 60 mins 60 mins 60 mins A2-s1, d0 No content Class E1 Class C 1121 - CPD - BC0031
Frost 12 FC 70/29 0.30 0.65 0.65 (MH) 39dB Class 1/0 - - - x A2-s1, d0 No content Class E1 Class A 1121 - CPD - BC0029
Glastone 13 FC 70/29 0.30 0.70 0.65 (MH) 37dB Class 1/0 - - - x A2-s1, d0 No content Class E1 Class A 1121 - CPD - BC0029
Summit 14 R 90/40 0.29 0.75 0.70 38dB Class 1/0 - - - x A2-s1, d0 No content Class E1 Class B 1121 - CPD - BC0029
Sandrift 15 R 70/29 0.29 0.70 0.65 (MH) 40dB Class 1/0 - - - x A2-s1, d0 No content Class E1 Class A 1121 - CPD - BC0029
Radar 16 R 70/29 0.25 0.55 0.50 (H) 34dB Class 1/0 30 mins - - A2-s1, d0 No content Class E1 Class A 1121 - CPD - BC0002
Olympia HP 17 R 90/29 0.23 0.35 0.40 30dB Class 1/0 - - - A2-s1, d0 No content Class E1 Class B 1121 - CPD - BC0031
Fissured 18 R 70/29 0.25 0.60 0.55 (H) 36dB Class 1/0 30 mins - - A2-s1, d0 No content Class E1 Class A 1121 - CPD - BC0002
Acoustics
A balanced acoustical environment often plays an important part in improving productivity, comfort and peoples’ sense of well being.
Through appropriate selection and placement of USG acoustical ceiling systems, it is possible to improve speech intelligibility, reduce unwanted noise or increase privacy within a space or between adjacent offices.
Acoustical ceilings absorb and/or attenuate sound. The two main acoustical performance ratings indicate panel performance:
αW, NRC - defines the average sound absorption of a ceiling system
DncW - defines the average ‘room to room’ sound attenuation of a ceiling system.
Sound absorption“Sound absorption” describes the reduction of noise within a room. Acoustical ceiling tiles absorb sound energy and serve to control acoustic reverberation time. Different tile patterns provide different levels of sound absorption.
Sound attenuation“Sound attenuation” refers to the attenuation of noise passing into a room from outside, such as room-to-room noise or noise from above ceiling services. The test data in dB (DncW) for each tile gives guidance on the sound insulation, but it should be seen in the context of the overall room construction.
Humidity
Extreme heat, humidity and fluctuating climatic conditions can shorten the life of a ceiling system. The connection of temperature
to relative humidity (RH) is crucial in determining the best product for any application. USG’s specially formulated ceiling panels resist high heat and humidity without visible sag and are available in a range of performance options up to 100% RH/40°C.
The USG ceiling tile range meets or exceeds the minimum requirements of BS8290 (1991) as defined as:a. Normal environments
(max. 25±2°C/65±5%RH)b. High humidity environments
(max. 25±2°C/90±5%RH)
• For applications in extreme environmental conditions such as exterior soffits, parking garages or swimming pools, products with 100% RH/40°C are recommended. Install with DONN Brand DX24KB corrosion resistant grid.
• For applications with uncontrolled environmental conditions, natural ventilation systems, or in humid areas such as washrooms, kitchens or wet process areas, products with 95-99%RH/40°C or better are recommended.
• For applications with intermittent heating and cooling systems, products with 90%RH/32°C or better are recommended.
• For applications with normal controlled environmental conditions, products with 70% RH/29°C or better are suitable.
Sound attenuation
Sound absorption
5
Page TypeHumidity ResistanceMax % RH / °C
Thermal resistance R value m2 °C/W
Acoustical Performance Fire Performance in accordance with BS 476 Technical Performance in accordance with EN 13964
Product Name NRC αW DncWFire ReactionBS 476: pt 6 & 7
Steel BeamBS 476: pt 23
Timber FloorBS 476: pt 21
Mezzanine FloorBS 476: pt 21
IEQ Benefits
Reaction to fire EN 13501-1
Release of Asbestos
Release of formaldehyde ENV 717-1 & 717-2
Exposure class EN 13964 - Table 7
EC Certificate of Conformity number
Sonatone 6 R 95/40 0.38 0.75 0.70 (MH) 38dB Class 1/0 - - - x A2-s1, d0 No content Class E1 Class C 1121 - CPD - BC0030
Ceramic Radar 7 FC 100/40 0.22 0.50 0.50 41dB non combustible** 60 mins 60 mins 60 mins A2-s1, d0 No content Class E1 Class C 1121 - CPD - BC0002
Halcyon * 8 R 95/40 0.77 0.90 0.85 32dB TBC - - - x TBC No content Class E1 Class C TBC
Clean Room 9 R 95/32 0.25 0.15 0.15 35dB Class 1/0 - - - x A2-s1, d0 No content Class E1 Class C 1121 - CPD - BC0031
Olympia II Micro 10 FC 95/32 0.25 0.60 0.55 (L) 32dB Class 1/0 60 mins - 60 mins A2-s1, d0 No content Class E1 Class C 1121 - CPD - BC0002
Radar Climaplus 11 FC 95/32 0.25 0.70 0.70 31dB Class 1/0 60 mins 60 mins 60 mins A2-s1, d0 No content Class E1 Class C 1121 - CPD - BC0031
Frost 12 FC 70/29 0.30 0.65 0.65 (MH) 39dB Class 1/0 - - - x A2-s1, d0 No content Class E1 Class A 1121 - CPD - BC0029
Glastone 13 FC 70/29 0.30 0.70 0.65 (MH) 37dB Class 1/0 - - - x A2-s1, d0 No content Class E1 Class A 1121 - CPD - BC0029
Summit 14 R 90/40 0.29 0.75 0.70 38dB Class 1/0 - - - x A2-s1, d0 No content Class E1 Class B 1121 - CPD - BC0029
Sandrift 15 R 70/29 0.29 0.70 0.65 (MH) 40dB Class 1/0 - - - x A2-s1, d0 No content Class E1 Class A 1121 - CPD - BC0029
Radar 16 R 70/29 0.25 0.55 0.50 (H) 34dB Class 1/0 30 mins - - A2-s1, d0 No content Class E1 Class A 1121 - CPD - BC0002
Olympia HP 17 R 90/29 0.23 0.35 0.40 30dB Class 1/0 - - - A2-s1, d0 No content Class E1 Class B 1121 - CPD - BC0031
Fissured 18 R 70/29 0.25 0.60 0.55 (H) 36dB Class 1/0 30 mins - - A2-s1, d0 No content Class E1 Class A 1121 - CPD - BC0002
Fire
Life safety and protection of property are important considerations in the design and specification of
acoustical ceiling systems. Specially formulated Firecode (FC) rated ceiling
panels are a crucial component of USG’s tested fire protection systems. Specification and installation must be in accordance with the selected fire test description of the system.
Reaction to fireCeiling products are generally considered suitable for multi-use buildings when the products conform to BS 476 part 6 and 7.
BS 476 part 6 is the fire propagation classification which compares the constitution of combustible materials to the development of fire – performance class 0.
BS 476 part 7 is the surface spread of flame classification which indicates the tendency of materials to support the spread of flame across the surface. (Best performance Class 1, worst performance Class 4.)
All USG tiles achieve Class 1 and Class 0 as designated by BS 476 part 7 and 6, and as required by Building Regulations Approved Document B.
Fire protectionStructural fire protection BS 476 parts 21 and 23.
Suspended ceilings can be used to provide protection to the structural elements of a building. In the event of a fire, the ceiling membrane protects the structure for a period of time enabling evacuation and fire fighting. The period of protection is determined by testing to BS 476 part 23. Testing to BS 476 part 21, section 7, determines the protection provided to a loaded timber floor structure. In order to ensure the validity of a “fire protecting” ceiling, installation must be as described in the relevant test report. Any alteration may affect the fire protection capabilities of that ceiling system.
For further information or advice on our testing, products or relevant standards, please contactyour local representative or our Technical Services Department.
Warranty
USG offers a lifetime (30 year) limited warranty on ultra high performance tiles and a 15 year limited warranty on high performance tiles when installed on USG’s DONN Brand suspension grid. Refer to USG Technical Services Department for details.
USG ceiling systems must be installed and maintained in accordance with current USG written instructions and industry best practice as defined by BS 8290.
BS EN 13964:2004 Suspended Ceilings
This is the new harmonised European standard, effective from 1st January 2005, which provides information for parties responsible for designing, manufacturing and specifying/ selecting suspended ceilings used for interior applications. It covers suspended ceilings sold as kits, individual components and membrane components and describes test methods and methods of assessment as well as provisions for the evaluation of conformity of the products to the requirements of this standard.
See page 42 for more information on the new standard.
* Subject to completion of tests. ** When tested in accordance with BS 476:PT4
6
Sonatone
DONN ® Grid Options
Sonatone
SoundAbsorption
SQ/DX24A
SQ/DX35D1
SLT/DX24E
FLB/DX15K
FLB/FINELINE
M
DescriptionAccessible acoustical ceiling system with fine textured laminated panels.
•
Acoustical performanceItem No.Size (mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
38dB0.70(MH)0.75ME 86185600 x 600 x 19SQ 92% White A,D1Sonatone R
38dB0.70(MH)0.75ME 881851200 x 600 x 19SQ 92% White A,D1Sonatone R38dB0.70(MH)0.75ME 86785600 x 600 x 19SLT 92% White ESonatone R
38dB0.70(MH)0.75ME 86985600 x 600 x 19FLB 92% White K,MSonatone R* Type: R: Regular
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
1.020.970.670.390.67…S 1.04
Features and BenefitsDurable laminated construction•High sound absorption, for effective reduction of unwanted noise
•
Mid range sound attenuation, ideal for general commercial construction
•
High light reflectance, to improve lighting efficiency and reduce energy costs. Ideal for use with uplighters
•
Air filtration resistant, panels stay cleaner longer, ideal for applications with 'return air plenums'
•
Cleanroom classified, Federal Spec. 209E class 10,000 option (Ref. USG)
•
Scrub resistant. Dirt marks are easy to remove•Scuff and scratch resistant, for longer life and lower maintenance costs
•
Ultra high humidity resistant, ensures durability in standard or extreme environmental conditions. May be installed early in the building program
•
Fire resistant system options, for life safety and protection of property
•
Durable fully painted and sealed edge options (SLT, FL), ideal for frequently accessed ceilings
•
Office•Retail•Sport•
Warranty10 year panel or 30 year system warranty, ref USG.
CompositionContains recycled material, no asbestos. Tile is a patented process blend of NC mineral fibre, inorganic fillers and speciality hydrophobic organic binders. Pre-finished with painted glass tissue laminate. Material safety data sheet available on request.
Humidity ResistanceMaximum 95% RH / 40°CClass C (BS EN 13964)
Fire reactionBS 476 Pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Air filtration resistance>8000 Pa.s/m per ASTM 522CClassified as low fibre emission when tested to Nord Test method NT Build 347 at the Danish Technological Institute.
Scrub resistanceScrub resistant, exceeds 5000 cycles perASTM D 2486-89.
Scratch resistanceScratch resistant - no visible damage by metal shim up to 20mm using surface scratch test.
Thermal resistanceR 0.38 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight5.7 kg/m²
MaintenanceEasily cleaned using soft brush, vacuum or damp sponge.
Indoor Environmental Quality (IEQ)This product has particular performance characteristics that benefit designers striving for Indoor Environmental Quality. See page 41.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0030
GB/SON-01 21-03-2007
7
Ceramic Radar
DONN ® Grid Options
Sonatone
SoundAbsorption
SQ/DX24A
SQ/DX35D1
SLT/DX24E
FLB/DX15K
FLB/FINELINE
M
DescriptionAccessible acoustical ceiling system with fine textured laminated panels.
•
Acoustical performanceItem No.Size (mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
38dB0.70(MH)0.75ME 86185600 x 600 x 19SQ 92% White A,D1Sonatone R
38dB0.70(MH)0.75ME 881851200 x 600 x 19SQ 92% White A,D1Sonatone R38dB0.70(MH)0.75ME 86785600 x 600 x 19SLT 92% White ESonatone R
38dB0.70(MH)0.75ME 86985600 x 600 x 19FLB 92% White K,MSonatone R* Type: R: Regular
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
1.020.970.670.390.67…S 1.04
Features and BenefitsDurable laminated construction•High sound absorption, for effective reduction of unwanted noise
•
Mid range sound attenuation, ideal for general commercial construction
•
High light reflectance, to improve lighting efficiency and reduce energy costs. Ideal for use with uplighters
•
Air filtration resistant, panels stay cleaner longer, ideal for applications with 'return air plenums'
•
Cleanroom classified, Federal Spec. 209E class 10,000 option (Ref. USG)
•
Scrub resistant. Dirt marks are easy to remove•Scuff and scratch resistant, for longer life and lower maintenance costs
•
Ultra high humidity resistant, ensures durability in standard or extreme environmental conditions. May be installed early in the building program
•
Fire resistant system options, for life safety and protection of property
•
Durable fully painted and sealed edge options (SLT, FL), ideal for frequently accessed ceilings
•
Office•Retail•Sport•
Warranty10 year panel or 30 year system warranty, ref USG.
CompositionContains recycled material, no asbestos. Tile is a patented process blend of NC mineral fibre, inorganic fillers and speciality hydrophobic organic binders. Pre-finished with painted glass tissue laminate. Material safety data sheet available on request.
Humidity ResistanceMaximum 95% RH / 40°CClass C (BS EN 13964)
Fire reactionBS 476 Pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Air filtration resistance>8000 Pa.s/m per ASTM 522CClassified as low fibre emission when tested to Nord Test method NT Build 347 at the Danish Technological Institute.
Scrub resistanceScrub resistant, exceeds 5000 cycles perASTM D 2486-89.
Scratch resistanceScratch resistant - no visible damage by metal shim up to 20mm using surface scratch test.
Thermal resistanceR 0.38 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight5.7 kg/m²
MaintenanceEasily cleaned using soft brush, vacuum or damp sponge.
Indoor Environmental Quality (IEQ)This product has particular performance characteristics that benefit designers striving for Indoor Environmental Quality. See page 41.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0030
GB/SON-01 21-03-2007
DONN ® Grid Options
Ceramic Radar
SoundAbsorption
SQ/DX24A
SQ/DX35D1
DescriptionAccessible acoustical ceiling system with ceramified mineral panels.
•
Acoustical performanceItem No.Size(mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
41dB0.500.50ME 56644600 x 600 x 15SQ 88% White A,D1Ceramic Radar FC
* Type: FC: Firecode
ApplicationsParking garages•Exterior soffits•Pools and shower areas•Saunas and steam rooms•
20001000500250125Hz 4000
0.840.570.340.250.46…S 0.93
Features and BenefitsCeramic bonded mineral fibre construction, inert and non combustible
•
Tested in live steam temperatures up to 135°C•Corrosive chemical fume resistant, durable in tough industrial, marine and swimming pool applications
•
Ultra high humidity resistant, ensures durability in standard or extreme environmental conditions. May be installed early in the building program
•
Mid range sound absorption, provides balance to room acoustics
•
High sound attenuation, for room to room privacy•Install with DONN DX24KB corrosion-resistant grid and accessories
•
Warranty10 year panel or 30 year system warranty, ref USG.
CompositionContains recycled material, no asbestos. Tile is a wet felted blend of NC mineral fibre, perlite, binders and inorganic fillers. Ceramified and pre-finished with primer and top coat paints. Material safety data sheet available on request.
Humidity ResistanceMaximum 100% RH / 40°CClass C (BS EN 13964)
Fire reactionBS 476 Pt 4 non combustible. MeetsBuilding Regulations requirements forClass 0.A2-s1, d0 (bS EN 13964)
Fire resistanceBS 476 Pt 21/2360 min. protection to steel beams, timber and mezzanine floors.
Not all edge details and grid combinations are tested and approved for fire protection. For precise installation details, a copy of the relevant test report should be obtained from USG.
Thermal resistanceR 0.22 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight7.8 kg/m²
MaintenanceEasily cleaned using soft brush, vacuum or damp sponge.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0002
GB/CER-01 21-03-2007
8
Halcyon
DONN ® Grid Options
Halcyon
SoundAbsorption
SQ/DX24A
SQ/DX15B1
SQ/DX35D1
DescriptionAccessible acoustical ceiling system with fine textured laminated panels.
•
Acoustical performanceItem No.Size(mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
32dB0.850.90ME 88221600 x 600 x 25SQ 88% White A,B1,D1Halcyon R
* Type: R: Regular
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
1.091.170.850.570.72…S 1.05
Features and BenefitsFine, monolithic texture•Light reflectance of LR 0.88 is part of an “indirect lighting” solution
•
Exceptional noise reduction with NRC values up to 0.90 to meet the demanding sound control needs of open-plan offices
•
Low-maintenance panels look new for years to come•CLIMAPLUS™ 15-year warranty to withstand conditions up to 40°C (104°F)/95% relative humidity without visible sag when used with a DONN® brand suspension system
•
Lightweight fibreglass basemat makes installation fast and easy
•
Office•Retail•
CompositionContains recycled material, no asbestos. Tile is a lightweight fibreglass basemat, pre-finished with painted glass tissue laminate. Material safety data sheet available on request.
Humidity ResistanceMaximum 95% RH / 40°CClass C (BS EN 13964)
Fire reactionA2-s1, d0 (BS EN 13964)
Thermal resistanceR 0.77 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight2.3 kg/m²
ColoursWhite. Other colours to special order.
MaintenanceEasily cleaned using damp cloth or sponge, soft brush or vacuum.
Indoor Environmental Quality (IEQ)This product has particular performance characteristics that benefit designers striving for Indoor Environmental Quality. See page 41.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
GB/HALC-01 21-03-2007
9
Clean Room
DONN ® Grid Options
Halcyon
SoundAbsorption
SQ/DX24A
SQ/DX15B1
SQ/DX35D1
DescriptionAccessible acoustical ceiling system with fine textured laminated panels.
•
Acoustical performanceItem No.Size(mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
32dB0.850.90ME 88221600 x 600 x 25SQ 88% White A,B1,D1Halcyon R
* Type: R: Regular
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
1.091.170.850.570.72…S 1.05
Features and BenefitsFine, monolithic texture•Light reflectance of LR 0.88 is part of an “indirect lighting” solution
•
Exceptional noise reduction with NRC values up to 0.90 to meet the demanding sound control needs of open-plan offices
•
Low-maintenance panels look new for years to come•CLIMAPLUS™ 15-year warranty to withstand conditions up to 40°C (104°F)/95% relative humidity without visible sag when used with a DONN® brand suspension system
•
Lightweight fibreglass basemat makes installation fast and easy
•
Office•Retail•
CompositionContains recycled material, no asbestos. Tile is a lightweight fibreglass basemat, pre-finished with painted glass tissue laminate. Material safety data sheet available on request.
Humidity ResistanceMaximum 95% RH / 40°CClass C (BS EN 13964)
Fire reactionA2-s1, d0 (BS EN 13964)
Thermal resistanceR 0.77 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight2.3 kg/m²
ColoursWhite. Other colours to special order.
MaintenanceEasily cleaned using damp cloth or sponge, soft brush or vacuum.
Indoor Environmental Quality (IEQ)This product has particular performance characteristics that benefit designers striving for Indoor Environmental Quality. See page 41.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
GB/HALC-01 21-03-2007
DONN ® Grid Options
Clean Room
SoundAbsorption
SQ/DX24A
DescriptionAccessible ceiling system with sealed edge vinyl coated aluminium foil laminated panels.
•
Acoustical performanceItem No.Size (mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
35dB0.150.15ME 56099600 x 600 x 16SQ >=80% White AClean Room R
* Type: R: Regular
ApplicationsUp to class 100 cleanrooms•Computer rooms•Food/ beverage processing•Laboratories•
20001000500250125Hz 4000
0.130.130.120.170.26…S 0.07
Features and BenefitsCleanroom classified, Federal Spec. 209E class 100•Washable, suitable for frequent cleaning•Panels meet USDA/FSIS requirements for food processing areas
•
Air filtration resistant, panels stay cleaner longer, ideal for applications with 'return air plenums'
•
Ultra high humidity resistant, ensures durability in standard or extreme environmental conditions. May be installed early in the building program
•
Mid range sound attenuation, ideal for general commercial construction
•
Easy to trim and install•
Operating rooms•Sterile rooms•
Warranty10 year panel or 30 year system warranty, ref USG.
CompositionContains recycled material, no asbestos. Tile is a patented process blend of NC mineral fibre, inorganic fillers and speciality hydrophobic organic binders. Pre-finished with vinyl-coated aluminium laminate facing. Material safety data sheet available on request.
Humidity ResistanceMaximum 95% RH / 32°CClass C (BS EN 13964)
Fire reactionA2-s1, d0 (BS EN 13964)
Air filtration resistance>8000 Pa.s/m per ASTM 522C
Thermal resistanceR 0.25 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight5.4 kg/m²
MaintenanceEasily cleaned with damp sponge.
Indoor Environmental Quality (IEQ)This product has particular performance characteristics that benefit designers striving for Indoor Environmental Quality. See page 41.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0031
GB/CR-01 21-03-2007
810
Olympia II Micro
DONN ® Grid Options
Olympia II Micro
SoundAbsorption
SQ/DX24A
SQ/DX35D1
SLT/DX24E
FLB/DX15K
FLB/FINELINE
M
DescriptionAccessible acoustical ceiling system with micro perforated fine sand textured panels.
•
Acoustical performanceItem No.Size (mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
32dB0.55(L)0.60ME 4211600 x 600 x 15SQ >=85% White A,D1Olympia II Micro FC
32dB0.55(L)0.60ME 44111200 x 600 x 15SQ >=85% White A,D1Olympia II Micro FC32dB0.55(L)0.60ME 4221600 x 600 x 15SLT >=85% White EOlympia II Micro FC
32dB0.55(L)0.60ME 44211200 x 600 x 15SLT >=85% White EOlympia II Micro FC32dB0.55(L)0.60ME 4231600 x 600 x 15FLB >=85% White K,MOlympia II Micro FC
* Type: FC: Firecode
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
0.520.740.580.470.49…S 0.33
Features and BenefitsMid range sound absorption, provides balance to room acoustics
•
Mid range sound attenuation, ideal for general commercial construction
•
High humidity resistant, suitable for applications with intermittent heating and cooling. May be installed early in the building program
•
Fire resistant system options, for life safety and protection of property
•
Durable fully painted and sealed edge options (SLT, FLB), ideal for frequently accessed ceilings
•
Easy to trim and install•
Office•Retail•
Warranty10 year panel or 15 year system warranty, ref USG.
CompositionContains recycled material, no asbestos. Tile is a patented process blend of NC mineral fibre, inorganic fillers and speciality hydrophobic organic binders. Pre-finished with primer and top coat paints. Material safety data sheet available on request.
Humidity ResistanceMaximum 95% RH / 32°CClass C (BS EN 13964)
Fire reactionBS 476 Pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Fire resistanceBS 476 pt 21/2360 min. protection to steel beams and mezzanine floors.
Not all edge details and grid combinations are tested and approved for fire protection. For precise installation details, a copy of the relevant test report should be obtained from USG.
Thermal resistanceR 0.25 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight4.7 kg/m²
MaintenanceEasily cleaned using soft brush or vacuum.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0002
GB/OLYIIM-01 21-03-2007
911
Radar ClimaPlus
DONN ® Grid Options
Olympia II Micro
SoundAbsorption
SQ/DX24A
SQ/DX35D1
SLT/DX24E
FLB/DX15K
FLB/FINELINE
M
DescriptionAccessible acoustical ceiling system with micro perforated fine sand textured panels.
•
Acoustical performanceItem No.Size (mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
32dB0.55(L)0.60ME 4211600 x 600 x 15SQ >=85% White A,D1Olympia II Micro FC
32dB0.55(L)0.60ME 44111200 x 600 x 15SQ >=85% White A,D1Olympia II Micro FC32dB0.55(L)0.60ME 4221600 x 600 x 15SLT >=85% White EOlympia II Micro FC
32dB0.55(L)0.60ME 44211200 x 600 x 15SLT >=85% White EOlympia II Micro FC32dB0.55(L)0.60ME 4231600 x 600 x 15FLB >=85% White K,MOlympia II Micro FC
* Type: FC: Firecode
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
0.520.740.580.470.49…S 0.33
Features and BenefitsMid range sound absorption, provides balance to room acoustics
•
Mid range sound attenuation, ideal for general commercial construction
•
High humidity resistant, suitable for applications with intermittent heating and cooling. May be installed early in the building program
•
Fire resistant system options, for life safety and protection of property
•
Durable fully painted and sealed edge options (SLT, FLB), ideal for frequently accessed ceilings
•
Easy to trim and install•
Office•Retail•
Warranty10 year panel or 15 year system warranty, ref USG.
CompositionContains recycled material, no asbestos. Tile is a patented process blend of NC mineral fibre, inorganic fillers and speciality hydrophobic organic binders. Pre-finished with primer and top coat paints. Material safety data sheet available on request.
Humidity ResistanceMaximum 95% RH / 32°CClass C (BS EN 13964)
Fire reactionBS 476 Pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Fire resistanceBS 476 pt 21/2360 min. protection to steel beams and mezzanine floors.
Not all edge details and grid combinations are tested and approved for fire protection. For precise installation details, a copy of the relevant test report should be obtained from USG.
Thermal resistanceR 0.25 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight4.7 kg/m²
MaintenanceEasily cleaned using soft brush or vacuum.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0002
GB/OLYIIM-01 21-03-2007
DONN ® Grid Options
Radar ClimaPlus
SoundAbsorption
SQ/DX24A
SQ/DX35D1
SLT/DX24E
FLB/DX15K
FLB/FINELINE
M
DescriptionAccessible acoustical ceiling system with fine non-directional fissured panel.
•
Acoustical performanceItem No.Size (mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
31dB0.700.70DME 2215600 x 600 x 15SQ >=85% White A,D1Radar ClimaPlus FC
31dB0.700.70DME 24151200 x 600 x 15SQ >=85% White A,D1Radar ClimaPlus FC31dB0.700.70DME 2225600 x 600 x 15SLT >=85% White ERadar ClimaPlus FC
31dB0.700.70DME 2235600 x 600 x 15FLB >=85% White K,MRadar ClimaPlus FC* Type: FC: Firecode
ApplicationsEducation•Healthcare•Hotels•
20001000500250125Hz 4000
0.830.750.590.530.27…S 0.75
Features and Benefits360° non directional pattern with a fresh, clean appearance offers fast, economical installation
•
Mid range sound absorption, provides balance to room acoustics
•
Mid range sound attenuation, ideal for general commercial construction
•
Fire resistant system options, for life safety and protection of property
•
Easy to trim and install•Black option for cinemas, theatres etc.•
Leisure•Office•Retail•
Warranty10 year panel or 15 year system warranty, ref USG.
CompositionContains recycled material, no asbestos. Tile is a patented process blend of NC mineral fibre, inorganic fillers and speciality hydrophobic organic binders. Pre-finished with primer and top coat paints. Material safety data sheet available on request.
Humidity ResistanceMaximum 95% RH / 32°CClass C (BS EN 13964)
Fire reactionBS 476 pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Fire resistanceBS 476 Pt 21/2360 min. protection to steel beams, timber and mezzanine floors.
Not all edge details and grid combinations are tested and approved for fire protection. For precise installation details, a copy of the relevant test report should be obtained from USG.
Thermal resistanceR 0.25 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight5.6 kg/m²
MaintenanceEasily cleaned using soft brush or vacuum.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0031
GB/RADARCP-01 12-04-2007
812
Frost
DONN ® Grid Options
Frost
SoundAbsorption
SLB/DX24F
FL/DX15H
FL/FINELINE
J
DescriptionAccessible acoustical ceiling system with fine textured cast panels.
•
Acoustical performanceItem No.Size (mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
39dB0.65(MH)0.65ME 415600 x 600 x 19SLB 82% White FFrost FC
39dB0.65(MH)0.65ME 405600 x 600 x 19FL 82% White H,JFrost FC* Type: FC: Firecode
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
0.860.730.650.370.48…S 0.91
Features and BenefitsFine natural textured cast panels with durable surface that resists scrapes, ideal for frequently accessed ceilings
•
High sound absorption, for effective reduction of unwanted noise
•
Mid range sound attenuation, ideal for general commercial construction
•
Aluminium foil backing acts as a sound barrier and resists air filtration for cleaner panels
•
Office•Retail•
CompositionContains recycled material, no asbestos. Tile is a moulded blend of NC mineral fibre, pigments, organic binders, inorganic fillers and aluminium foil back laminate. Pre-finished with primer and top coat paints. Material safety data sheet available on request.
Humidity ResistanceMaximum 70% RH / 29°CClass A (BS EN 13964)
Fire reactionBS 476 Pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Thermal resistanceR 0.30 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight7.3 kg/m²
ColoursWhite. Other colours to special order.
MaintenanceEasily cleaned using soft brush or vacuum.
Indoor Environmental Quality (IEQ)This product has particular performance characteristics that benefit designers striving for Indoor Environmental Quality. See page 41.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0029
GB/FROST-01 21-03-2007
913
Glastone
DONN ® Grid Options
Frost
SoundAbsorption
SLB/DX24F
FL/DX15H
FL/FINELINE
J
DescriptionAccessible acoustical ceiling system with fine textured cast panels.
•
Acoustical performanceItem No.Size (mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
39dB0.65(MH)0.65ME 415600 x 600 x 19SLB 82% White FFrost FC
39dB0.65(MH)0.65ME 405600 x 600 x 19FL 82% White H,JFrost FC* Type: FC: Firecode
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
0.860.730.650.370.48…S 0.91
Features and BenefitsFine natural textured cast panels with durable surface that resists scrapes, ideal for frequently accessed ceilings
•
High sound absorption, for effective reduction of unwanted noise
•
Mid range sound attenuation, ideal for general commercial construction
•
Aluminium foil backing acts as a sound barrier and resists air filtration for cleaner panels
•
Office•Retail•
CompositionContains recycled material, no asbestos. Tile is a moulded blend of NC mineral fibre, pigments, organic binders, inorganic fillers and aluminium foil back laminate. Pre-finished with primer and top coat paints. Material safety data sheet available on request.
Humidity ResistanceMaximum 70% RH / 29°CClass A (BS EN 13964)
Fire reactionBS 476 Pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Thermal resistanceR 0.30 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight7.3 kg/m²
ColoursWhite. Other colours to special order.
MaintenanceEasily cleaned using soft brush or vacuum.
Indoor Environmental Quality (IEQ)This product has particular performance characteristics that benefit designers striving for Indoor Environmental Quality. See page 41.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0029
GB/FROST-01 21-03-2007
DONN ® Grid Options
Glastone
SoundAbsorption
SL/DX24G
FL/DX15H
FL/FINELINE
J
DescriptionAccessible acoustical ceiling system with heavy textured cast panels.
•
Acoustical performanceItem No.Size(mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
37dB0.65(MH)0.70ME 708600 x 600 x 19FL 69% White H,JGlastone FC
37dB0.65(MH)0.70ME 715600 x 600 x 19SL 69% White GGlastone FC* Type: FC: Firecode
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
1.080.980.490.340.54…S 1.02
Features and BenefitsNaturally textured cast mineral fibre panels, adds life to suspended ceiling
•
Aluminium foil backing acts as a sound barrier and resists air filtration for cleaner panels
•
Heavy texture, ideal for critical lighting applications•Mid range sound absorption, provides balance to room acoustics
•
Mid range sound attenuation, ideal for general commercial construction
•
Office•Retail•
CompositionContains recycled material, no asbestos. Tile is a moulded blend of NC mineral fibre, pigments, organic binders, inorganic fillers and aluminium foil back laminate. Pre-finished with primer and top coat paints. Material safety data sheet available on request.
Humidity ResistanceMaximum 70% RH / 29°CClass A (BS EN 13964)
Fire reactionBS 476 Pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Thermal resistanceR 0.30 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight7.3 kg/m²
ColoursWhite. Other colours to special order.
MaintenanceEasily cleaned using soft brush or vacuum.
Indoor Environmental Quality (IEQ)This product has particular performance characteristics that benefit designers striving for Indoor Environmental Quality. See page 41.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0029
GB/GLAS-01 21-03-2007
814
Summit
DONN ® Grid Options
Summit
SoundAbsorption
SLB/DX24F
FLB/DX15K
FLB/FINELINE
M
DescriptionAccessible acoustical ceiling system with fine textured cast panels.
•
Acoustical performanceItem No.Size(mm)Edge LR Colour Grid optionPattern Type *DncWNRC
38dB0.700.75ME 990600 x 600 x 19SLB 81% White FSummit R
38dB0.700.75ME 991600 x 600 x 19FLB 81% White K,MSummit R* Type: R: Regular
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
0.720.980.720.330.42…S 0.90
Features and BenefitsFine textured cast product with an extremely durable, impact-resistant surface
•
sound attenuation (DncW)•
CLIMAPLUS™ 15-year warranty to withstand conditions up to 40°C (104°F)/95% relative humidity without visible sag when used with a DONN® brand suspension system
•
Office•Retail•
CompositionContains recycled material, no asbestos. Tile is a patented process blend of NC mineral fibre, inorganic fillers and speciality hydrophobic organic binders. Pre-finished with primer and top coat paints. Material safety data sheet available on request.
Humidity ResistanceMaximum 90% RH / 40°CClass B (BS EN 13964)
Fire reactionBS 476 Pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Thermal resistanceR 0.29 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight8.2 kg/m²
ColoursWhite. Other colours to special order.
MaintenanceEasily cleaned using soft brush or vacuum.
Indoor Environmental Quality (IEQ)This product has particular performance characteristics that benefit designers striving for Indoor Environmental Quality. See page 41.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0029
GB/SUMM-01 20-03-2007
Excellent combination of noise reduction (NRC/ W) and
…W
…
915
Sandrift
DONN ® Grid Options
Summit
SoundAbsorption
SLB/DX24F
FLB/DX15K
FLB/FINELINE
M
DescriptionAccessible acoustical ceiling system with fine textured cast panels.
•
Acoustical performanceItem No.Size(mm)Edge LR Colour Grid optionPattern Type *DncWNRC
38dB0.700.75ME 990600 x 600 x 19SLB 81% White FSummit R
38dB0.700.75ME 991600 x 600 x 19FLB 81% White K,MSummit R* Type: R: Regular
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
0.720.980.720.330.42…S 0.90
Features and BenefitsFine textured cast product with an extremely durable, impact-resistant surface
•
sound attenuation (DncW)•
CLIMAPLUS™ 15-year warranty to withstand conditions up to 40°C (104°F)/95% relative humidity without visible sag when used with a DONN® brand suspension system
•
Office•Retail•
CompositionContains recycled material, no asbestos. Tile is a patented process blend of NC mineral fibre, inorganic fillers and speciality hydrophobic organic binders. Pre-finished with primer and top coat paints. Material safety data sheet available on request.
Humidity ResistanceMaximum 90% RH / 40°CClass B (BS EN 13964)
Fire reactionBS 476 Pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Thermal resistanceR 0.29 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight8.2 kg/m²
ColoursWhite. Other colours to special order.
MaintenanceEasily cleaned using soft brush or vacuum.
Indoor Environmental Quality (IEQ)This product has particular performance characteristics that benefit designers striving for Indoor Environmental Quality. See page 41.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0029
GB/SUMM-01 20-03-2007
Excellent combination of noise reduction (NRC/ W) and
…W
…
DONN ® Grid Options
Sandrift
SoundAbsorption
SLB/DX24F
FL/DX15H
FL/FINELINE
J
DescriptionAccessible acoustical ceiling system with fine textured cast panels.
•
Acoustical performanceItem No.Size (mm)Edge LR Colour Grid OptionPattern Type *DncW…WNRC
40dB0.65(MH)0.70ME 805600 x 600 x 19FL 82% White H,JSandrift R
40dB0.65(MH)0.70ME 815600 x 600 x 19SL 82% White FSandrift R* Type: R: Regular
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
0.850.850.690.360.49…S 0.87
Features and BenefitsUnique embossed texture replicates the natural beauty of drifting snow, ideal for use with uplighting or strong side lighting to accentuate the textured design
•
High sound absorption, for effective reduction of unwanted noise
•
Mid range sound attenuation, ideal for general commercial construction
•
Aluminium foil backing acts as a sound barrier and resists air filtration for cleaner panels
•
Office•Retail•
CompositionContains recycled material, no asbestos. Tile is a moulded blend of NC mineral fibre, pigments, organic binders, inorganic fillers and aluminium foil back laminate. Pre-finished with primer and top coat paints. Material safety data sheet available on request.
Humidity ResistanceMaximum 70% RH / 29°CClass A (BS EN 13964)
Fire reactionBS 476 Pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Thermal resistanceR 0.29 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight7.3 kg/m²
ColoursWhite. Other colours to special order.
MaintenanceEasily cleaned using soft brush or vacuum.
Indoor Environmental Quality (IEQ)This product has particular performance characteristics that benefit designers striving for Indoor Environmental Quality. See page 41.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0029
GB/SANDR-01 21-03-2007
816
Radar
DONN ® Grid Options
Radar
SoundAbsorption
SQ/DX24A
SQ/DX35D1
SLT/DX24E
FLB/DX15K
FLB/FINELINE
M
DescriptionAccessible acoustical ceiling system with fine non-directional fissured panel.
•
Acoustical performanceItem No.Size (mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
34dB0.50(H)0.55ME 2110600 x 600 x 15SQ >=85% White A,D1Radar R
34dB0.50(H)0.55ME 23101200 x 600 x 15SQ >=85% White A,D1Radar R34dB0.50(H)0.55ME 2120600 x 600 x 15SLT >=85% White ERadar R
34dB0.50(H)0.55ME 2130600 x 600 x 15FLB >=85% White K,MRadar R*Type: R: Regular
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
0.760.690.480.290.48…S 0.73
Features and Benefits360° non directional pattern with a fresh, clean appearance offers fast, economical installation
•
Mid range sound absorption, provides balance to room acoustics
•
Mid range sound attenuation, ideal for general commercial construction
•
Fire resistant system options, for life safety and protection of property
•
Easy to trim and install•Black option for cinemas, theatres etc.•
Office•Retail•
WarrantyStandard or 10 year panel/15 year system warranty, ref USG.
CompositionContains recycled material, no asbestos. Tile is a wet felted blend of cellulose fibres, NC mineral fibre, perlite, organic binders and inorganic fillers. Pre-finished with primer and top coat paints. Material safety data sheet available on request.
Humidity ResistanceMaximum 70% RH / 29°CClass A (BS EN 13964)
Fire reactionBS 476 pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Fire resistanceBS 476 Pt 2330 min. protection to steel beams.
Not all edge details and grid combinations are tested and approved for fire protection. For precise installation details, a copy of the relevant test report should be obtained from USG.
Thermal resistanceR 0.25 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight3.95 kg/m²
MaintenanceEasily cleaned using soft brush, vacuum or damp sponge.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0002
GB/RADAR-00 21-03-2007
917
Olympia HP
DONN ® Grid Options
Radar
SoundAbsorption
SQ/DX24A
SQ/DX35D1
SLT/DX24E
FLB/DX15K
FLB/FINELINE
M
DescriptionAccessible acoustical ceiling system with fine non-directional fissured panel.
•
Acoustical performanceItem No.Size (mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
34dB0.50(H)0.55ME 2110600 x 600 x 15SQ >=85% White A,D1Radar R
34dB0.50(H)0.55ME 23101200 x 600 x 15SQ >=85% White A,D1Radar R34dB0.50(H)0.55ME 2120600 x 600 x 15SLT >=85% White ERadar R
34dB0.50(H)0.55ME 2130600 x 600 x 15FLB >=85% White K,MRadar R*Type: R: Regular
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
0.760.690.480.290.48…S 0.73
Features and Benefits360° non directional pattern with a fresh, clean appearance offers fast, economical installation
•
Mid range sound absorption, provides balance to room acoustics
•
Mid range sound attenuation, ideal for general commercial construction
•
Fire resistant system options, for life safety and protection of property
•
Easy to trim and install•Black option for cinemas, theatres etc.•
Office•Retail•
WarrantyStandard or 10 year panel/15 year system warranty, ref USG.
CompositionContains recycled material, no asbestos. Tile is a wet felted blend of cellulose fibres, NC mineral fibre, perlite, organic binders and inorganic fillers. Pre-finished with primer and top coat paints. Material safety data sheet available on request.
Humidity ResistanceMaximum 70% RH / 29°CClass A (BS EN 13964)
Fire reactionBS 476 pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Fire resistanceBS 476 Pt 2330 min. protection to steel beams.
Not all edge details and grid combinations are tested and approved for fire protection. For precise installation details, a copy of the relevant test report should be obtained from USG.
Thermal resistanceR 0.25 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight3.95 kg/m²
MaintenanceEasily cleaned using soft brush, vacuum or damp sponge.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0002
GB/RADAR-00 21-03-2007
DONN ® Grid Options
Olympia HP
SoundAbsorption
SQ/DX24A
SQ/DX15B1
SQ/DX35D1
SLT/DX24E
FLT/DX15N
DescriptionAccessible acoustical ceiling system with perforated fine sand textured panels.
•
Acoustical performanceItem No.Size(mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
30dB0.400.35DA 2125600 x 600 x 14SQ 85% White A,B1,D1Olympia HP R
30dB0.400.35DA 22251200 x 600 x 14SQ 85% White A,B1,D1Olympia HP R30dB0.400.35DB 2125600 x 600 x 14SLT 85% White EOlympia HP R
30dB0.400.35DT 2125600 x 600 x 14FLT 85% White NOlympia HP R* Type: R: Regular
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
0.380.400.360.330.35…S 0.29
Features and BenefitsMid range sound absorption, provides balance to room acoustics
•
Mid range sound attenuation, ideal for general commercial construction
•
Durable fully painted and sealed edge options (SLT), ideal for frequently accessed ceilings
•
Easy to trim and install•
Office•Retail•
CompositionContains recycled material, no asbestos. Tile is a patented process blend of NC mineral fibre, inorganic fillers and speciality hydrophobic organic binders. Pre-finished with primer and top coat paints. Material safety data sheet available on request.
Humidity ResistanceMaximum 90% RH / 29°CClass B (BS EN 13964)
Fire reactionBS 476 Pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Thermal resistanceR 0.23 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight4.0 kg/m²
ColoursWhite. Other colours to special order.
MaintenanceEasily cleaned using soft brush or vacuum.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0031
GB/OLYHP-01 12-04-2007
81618
Fissured
DONN ® Grid Options
Fissured
SoundAbsorption
SQ/DX24A
SQ/DX35D1
SLT/DX24E
DescriptionAccessible acoustical ceiling system with heavy directional fissured panels.
•
Acoustical performanceItem No.Size (mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
36dB0.550.60ME 560600 x 600 x 15SQ >82% White A,D1Fissured R
36dB0.550.60ME 5621200 x 600 x 15SQ >82% White A,D1Fissured R36dB0.550.60ME 506600 x 600 x 15SLT >82% White EFissured R
* Type: R: Regular
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
0.760.800.510.350.47…S 0.62
Features and BenefitsMaximum economy and design simplicity•Mid range sound absorption, provides balance to room acoustics
•
Mid range sound attenuation, ideal for general commercial construction
•
Easy to trim and install•
Office•Retail•
WarrantyStandard or 10 year panel/15 year system warranty, ref USG.
CompositionContains recycled material, no asbestos. Tile is a wet felted blend of cellulose fibres, NC mineral fibre, perlite, organic binders and inorganic fillers. Pre-finished with primer and top coat paints. Material safety data sheet available on request.
Humidity ResistanceMaximum 70% RH / 29°CClass A (BS EN 13964)
Fire reactionBS 476 Pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Fire resistanceBS 476 Pt 2330 min. protection to steel beams.
Not all edge details and grid combinations are tested and approved for fire protection. For precise installation details, a copy of the relevant test report should be obtained from USG.
Thermal resistanceR 0.25 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight3.95 kg/m²
MaintenanceEasily cleaned using soft brush or vacuum.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0002
GB/FISS-01 21-03-2007
Ask for your copy now.• For structural and
aesthetic integrity in all ceiling designs
• Wide range of systems for standard and special applications
• Precision design and quality manufacturing
For more information e-mail: [email protected]
Basic principles
Detailed specifications
Technical illustrations
Local regulations
Frequently asked questions
is the world's leading manufac-
turer of ceiling grid, offering the widest
range of profiles and colours on the
market today. DONN® grid from USG
is compatible with all USG ceiling tiles
as well as most third party brands.
DONN® DX® from USG is the most
widely specified grid in Europe. The
patented clip design makes it fast and
easy to install but also easy to remove
without the need for tools.DO
NN
USG
91719
DONN® Suspension Systems
DONN ® Grid Options
Fissured
SoundAbsorption
SQ/DX24A
SQ/DX35D1
SLT/DX24E
DescriptionAccessible acoustical ceiling system with heavy directional fissured panels.
•
Acoustical performanceItem No.Size (mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
36dB0.550.60ME 560600 x 600 x 15SQ >82% White A,D1Fissured R
36dB0.550.60ME 5621200 x 600 x 15SQ >82% White A,D1Fissured R36dB0.550.60ME 506600 x 600 x 15SLT >82% White EFissured R
* Type: R: Regular
ApplicationsEducation•Healthcare•Hotels•Leisure•
20001000500250125Hz 4000
0.760.800.510.350.47…S 0.62
Features and BenefitsMaximum economy and design simplicity•Mid range sound absorption, provides balance to room acoustics
•
Mid range sound attenuation, ideal for general commercial construction
•
Easy to trim and install•
Office•Retail•
WarrantyStandard or 10 year panel/15 year system warranty, ref USG.
CompositionContains recycled material, no asbestos. Tile is a wet felted blend of cellulose fibres, NC mineral fibre, perlite, organic binders and inorganic fillers. Pre-finished with primer and top coat paints. Material safety data sheet available on request.
Humidity ResistanceMaximum 70% RH / 29°CClass A (BS EN 13964)
Fire reactionBS 476 Pt 6/7 Class 1/0A2-s1, d0 (BS EN 13964)
Fire resistanceBS 476 Pt 2330 min. protection to steel beams.
Not all edge details and grid combinations are tested and approved for fire protection. For precise installation details, a copy of the relevant test report should be obtained from USG.
Thermal resistanceR 0.25 m² °C/W
Release of asbestosNo content (BS EN 13964)
Release of formaldehydeClass E1 (BS EN 13964)
Weight3.95 kg/m²
MaintenanceEasily cleaned using soft brush or vacuum.
BS EN 13964:2004 Suspended Ceilingsis the new harmonised European standard, effective from1st January 2005, which provides information for partiesresponsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications.It covers suspended ceilings sold as kits, individualcomponents & membrane components and describes testmethods & methods of assessment as well as provisionsfor the evaluation of conformity of the products to therequirements of this standard.See page 42 for more information on the new standard.
This product has been subjected to factory production controls and additional testing according to a fixed test plan and the recognised testing office Warrington Certification Ltd, Holmesfield Road, Warrington, WA1 2DS, UK has performed all tests of the relevant properties of the product and provided an EC certificate of Conformity, number: 1121 - CPD - BC0002
GB/FISS-01 21-03-2007
Installing a DONN® grid system Theappearanceofasuspendedacousticalceilingisdependentbothonthematerialsusedandonthequalityoftheinstallation.USGmanufacturescomponentstomeetBS8290,assuringthatthematerial,structuralandqualitystandardsareasprescribed.InstallationmustmeetBS8290,assuringproperlevelandsecureattachmentasprescribed.Goodconstructionconditionsareveryimportantwhensuccessfullyinstallingasuspendedceiling.Itisrecommendedthatthetemperatureandhumidityrangebe14–25°Candmax.75%relativehumidity.Storematerialsinaprotectedarea,storetilesonthejobatleast3dayspriortoinstallation.
Step1Measuringandplanningarekeyfirststepsintheinstallationprocess.Measurement and placement of the tees will be on centre (o.c.), meaning from the centre of one to the centre of the next. Planning starts with a drawing of the room that shows all walls, including bays, alcoves beams and stairwells. Note which direction the joists (if any) are running, or if architectural drawings necessitate working in one direction or another. Determine the lines for main runners and cross tees in such a way that the tiles that abut the wall are at least half a tile (300mm).
Step2Markthedesiredceilingheight(maintainingatleast70mmclearancebelowthelowestduct,pipeorbeam.)Measure and mark the walls at all corners above the installation level (=‑add the height of the wall angle to the desired ceiling height.) Snap a chalk line and test for level. Measuring down from joists or up from the floor is not recommended, since
neither may be level. Install wall angle with top edge of angle at the chalk line, spacing appropriate fixings 450mm o.c. or closer. Cut and mitre outside and inside angles at 45˚, fitting them snugly together. Alternatively, simply butt angles at corner (as in system illustration).
Steps5/6
Hanger positions
➊ MainTee➋ CrossTee1200mm➌ CrossTee600mm➍ Hanger
Step2Step4
max. 450mm
➊
➋ ➌
➍
➊ Main tee
➋ Cross Tee
1200mm
➊
➌
➋
81620
Step4Attachthemainrunnerstothehangers.In each row, trim the main tee so that the cross‑tee slot will line up with the cross‑tee string. Mount main tees, resting the cut end of the main tee on the wall angle. The cut end of the main runner should be about 5mm away from the wall.
Step5Installcrosstees,assuringthattheyareadequatelyconnectedtomaintees(they"click"inplacewhenproperlyseated).Where two cross tees intersect in the same slot, insert second cross‑tee end to the left of the first. Where a cross‑tee is installed without an opposing cross‑tee, a nail should be slipped into the opening of the cross‑tee clip to maintain the pull‑out value for the cross‑tee.
Step6Layinpanels,beginningatonecornerandcompletingrowbyrow.Tilt each panel up through the opening and lower it to rest squarely on all four tees.
Step7Removalaseasyasinstallation.Just grasp the main tee with one thumb under the main tee‑cross tee connection and, pushing up with the thumb, give the main tee a quick, short twist. That’s all it takes – no tools needed. The strong clip means that the grid can be reinstalled straightaway with no tearing or bending of the clip.
Step8 MainteedemountingUsing a straight shearing motion, push withyour left hand and pull with your right handto disconnect the main runner splice. Note:do not twist the splice during the removalprocedure.
Step3Toconfirmlevel,stretchastringuntiltautalongthepositionswhichthemainteewilloccupy.Inserting a nail between the wall and the wall angle at marked locations serves as a good anchor for this purpose. Stretch another string across the room where the first row of cross tees will be located. This identifies where the first prepunched slots need to fall. Check to be sure the cross tee string is at 90˚ to the main tee string via the 3‑4‑5 method. Install the hangers at 1200mm o.c. above the lines of the main runners. Fix to the structure above using appropriate plugs, screws or other devices.
A Cut tees with aviation snips, first the stem and then the flanges.
B Cut mineral fibre panels with utility knife and straight edge, cutting the face first. Cut panels should be at least 15mm larger than the opening.
C To install panels around obstructions, draw their exact locations on the panels and cut out. Then cut the panel in two parts through the largest section of the cut‑out to enable fitting.
D To trim for Shadowline edge, use a utility knife to cut the panel, first at the face, then from the edge, to the same depth as Shadowline. If windows, stairwells, etc., extend above the ceiling plane, build suitable valances and attach wall angle.
Otherinstallationtips
21
222
DONN® DX24Systemcharacteristics:
• Exposed 24mm system• The most widely used grid system in the world• Fast and simple to install• Maximum economy and design simplicity• Cross‑tees with override‑ends resist twisting and give professionally finished
look with no exposed steel edges• Patented QUICK‑RELEASE™ clip design: easy to remove without tools • Compatible with Square edge and SLB edge ceiling tiles• Designed for fire rated ceilings• Colour options available• Additional features available in the following systems: ‑ DONN DXB24 Lay‑in/Butt‑cut system ‑ DONN DX KB Corrosion‑protected ‑ DONN DX Seismic
SpecificationDONNDX24Grid shall be DONN DX24 exposed grid system, hot dipped galvanised steel 'T' section with pre painted capping. Table width 24mm. To suit variable module sizes, most typically 600 x 600mm and 1200 x 600mm.
Mainrunners:38 x 24mm, ref DX24XH370 shall be normally spaced at 1200mm centres and suspended from the structure or soffit using pre‑straightened 2mm diameter HDG steel wire hangers, ref DSW2, at typically 1200mm centres. First hanger shall be no more than 450mm from the perimeter. Main runners joined end on by means of the integral splice. Splice connections shall be supported within 150mm with a hanger, and shall be staggered across the ceiling area.
Crosstees:1200mm cross tees, 38 x 24mm ref DX24TH120, shall be installed perpendicular between the main runners at 600mm centres to form a 1200 x 600mm module. If applicable, 600mm cross tees, 25 x 24mm ref DX24TS60, shall be installed perpendicular between the 1200mm cross tees to form a 600 x 600mm module. All cross tees feature a ‘joggled’ end detail.
Perimetertrims:29mm x 19mm painted HDG steel angle trim, ref MI 2919, fixed to perimeter wall using fixings appropriate to the structure at maximum 450mm centres. Corners shall normally be finished with a lapped or butt joint.
Hangers:Shall be from pre straightened 2mm diameter HDG steel wire, ref DSW2. Hangers shall be fixed through holes in stalk or bulb of main runner and wrapped around itself a minimum of 3 times. Alternatively, hangers can be formed from 25 x 25mm HDG steel angle section, ref DGA5, fixed to main runners using appropriate self drilling screws or nut and bolt fixings. Hangers shall be normally spaced at 1200mm centres although alternative spacings are acceptable provided maximum loadings stated above are not exceeded. Hangers to be fixed to structure or soffit using fixings appropriate to the structure or soffit.
Holddownclips:Where applicable, these shall be non removable type clips, ref VB45. These generally will only be required in certain fire protecting assemblies or where there is a risk of tile uplift. Where fitted, these should be applied to all grid members at a rate of 1 clip per 600mm of tile edge.
DX24 / SQ DX24 / SLT DX24 / SLB
Tileedgessupported
DX24SystemComponents
38mm
24mm
38mm
24mm
25mm
24mm
50mm
300mm
300mm
600mm
600mm
900mm
1200mm
100mm 100mm
3700mm
100mm38mm
24mm
38mm
24mm
25mm
24mm
50mm
300mm
300mm
600mm
600mm
900mm
1200mm
100mm 100mm
3700mm
100mm
Main Runner DX24XH370
Long Cross Tee DX24TH120
Short Cross Tee DX24TS60
Module Nr Description Itemreference 600x600 600x1200
➊ Main Runner DX24XH370 0.83 lin m 0.83 lin m
➋ 1200 Cross Tee DX24TH120 1.67 lin m 1.67 lin m
➌ 600 Cross Tee DX24TS60 0.83 lin m
➍ Hanger DSW2 0.70 pieces 0.70 pieces
Material needed for DX24 grid construction (per m2 ceiling)
DX24QuantityGuide:Refer to diagram on page 20
BSEN13964:2004Reactiontofire: A2‑s1, d0Corrosionclass: Class BFor further information on EN 13964, see page 42.
Module Mainrunnerat1200mm Mainrunnerat600mm „ Hangerdistance(mm) 600x600 600x1200 600x600 600x1200
800 23.7 23.9 - -
1000 23.7 23.9 55.9 56.3
1200 12.8 12.9 26.3 26.6
1500 4.6 4.8 10.0 10.3
Maximum allowed weight of tiles per m2 of ceiling
Note: The load per m2 must be distributed uniformly (no point loads) over the ceiling area. After loading, the deflection of any grid component will remain within the maximum deflection per span as stated in BS: 8290: 1991, provided the grid layout is as presented in the sketch.
Please consult USG for other layouts, load or hanger distance.
323
DONN® DXB24Systemcharacteristics:
• Exposed 24mm system• Butt‑cut cross tee system, preferred for flat lay‑in metal ceilings and
gypsum ceiling applications • Maximum economy and design simplicity• Fast and simple to install• Patented QUICK‑RELEASE™ clip design: easy to remove without tools • Compatible with Square edge and SLB edge ceiling tiles• Designed for fire rated ceilings• Colour options available
SpecificationDONNDXB24Grid shall be DONN DXB24 exposed grid system, hot dipped galvanised steel 'T' section with pre painted capping. Table width 24mm. To suit variable module sizes, most typically 600 x 600mm and 1200 x 600mm.
Mainrunners:38 x 24mm, ref DXB24XH370 shall be normally spaced at 1200mm centres and suspended from the structure or soffit using pre‑straightened 2mm diameter HDG steel wire hangers, ref DSW2, at typically 1200mm centres. First hanger shall be no more than 450mm from the perimeter. Main runners joined end on by means of the integral splice. Splice connections shall be supported within 150mm with a hanger, and shall be staggered across the ceiling area.
Crosstees:1200mm cross tees, 38 x 24mm ref DXB24TH120, shall be installed perpendicular between the main runners at 600mm centres to form a 1200 x 600mm module. If applicable, 600mm cross tees, 25 x 24mm ref DXB24TS60, shall be installed perpendicular between the 1200mm cross tees to form a 600 x 600mm module. All cross tees feature a ‘butt cut’ end detail.
Perimetertrims:29mm x 19mm painted HDG steel angle trim, ref MI 2919, fixed to perimeter wall using fixings appropriate to the structure at maximum 450mm centres. Corners shall normally be finished with a lapped or butt joint.
Hangers:Shall be from pre straightened 2mm diameter HDG steel wire, ref DSW2. Hangers shall be fixed through holes in stalk or bulb of main runner and wrapped around itself a minimum of 3 times. Alternatively, hangers can be formed from 25 x 25mm HDG steel angle section, ref DGA5, fixed to main runners using appropriate self drilling screws or nut and bolt fixings. Hangers shall be normally spaced at 1200mm centres although alternative spacings are acceptable provided maximum loadings stated above are not exceeded. Hangers to be fixed to structure or soffit using fixings appropriate to the structure or soffit.
Holddownclips:Where applicable, these shall be non removable type clips, ref VB45. These generally will only be required in certain fire protecting assemblies or where there is a risk of tile uplift. Where fitted, these should be applied to all grid members at a rate of 1 clip per 600mm of tile edge.
Tileedgessupported
DXB24SystemComponents
Module Nr Description Itemreference 600x600 600x1200
➊ Main Runner DXB24XH370 0.83 lin m 0.83 lin m
➋ 1200 Cross Tee DXB24TH120 1.67 lin m 1.67 lin m
➌ 600 Cross Tee DXB24TS60 0.83 lin m
➍ Hanger DSW2 0.70 pieces 0.70 pieces
Material needed for DXB24 grid construction (per m2 ceiling)
DXB24QuantityGuide:Refer to diagram on page 20
BSEN13964:2004Reactiontofire: A2‑s1, d0Corrosionclass: Class BFor further information on EN 13964, see page 42.
Module Mainrunnerat1200mm Mainrunnerat600mm „ Hangerdistance(mm) 600x600 600x1200 600x600 600x1200
800 23.7 23.9 - -
1000 23.7 23.9 55.9 56.3
1200 12.8 12.9 26.3 26.6
1500 4.6 4.8 10.0 10.3
Maximum allowed weight of tiles per m2 of ceiling
Note: The load per m2 must be distributed uniformly (no point loads) over the ceiling area. After loading, the deflection of any grid component will remain within the maximum deflection per span as stated in BS: 8290: 1991, provided the grid layout is as presented in the sketch.
Please consult USG for other layouts, load or hanger distance.
DX24 / SQ DX24 / SLT DX24 / SLB
Main Runner DXB24XH370
Long Cross Tee DXB24TH120
Short Cross Tee DXB24TS60
224
DONN® DX15Systemcharacteristics:
• Exposed 15mm system• Narrow table grid for subtle visual effect• Cross‑tees with override‑ends resist twisting and give professionally finished
look with no exposed steel edges• Patented QUICK‑RELEASE™ clip design: easy to remove without tools • Fast and simple to install and easily accessible• Standard joggled (overriding) cross tee system• Suitable for FLB edge and most "face cut design" ceiling tiles• Designed for fire rated ceilings• Colour options available• Alternative butt cut cross tee system available (DXB15 in RAL 9010 white)
‑ the recommended system for metal tile applications
SpecificationDONNDX15Grid shall be DONN DX15 exposed grid system, hot dipped galvanised steel 'T' section with pre painted capping. Table width 15mm. To suit variable module sizes, most typically 600 x 600mm and 1200 x 600mm.
Mainrunners:38 x 15mm, ref DX15XH370 shall be normally spaced at 1200mm centres and suspended from the structure or soffit using pre‑straightened 2mm diameter HDG steel wire hangers, ref DSW2, at typically 1200mm centres. First hanger shall be no more than 450mm from the perimeter. Main runners joined end on by means of the integral splice. Splice connections shall be supported within 150mm with a hanger, and shall be staggered across the ceiling area.
Crosstees:1200mm cross tees, 38 x 15mm ref DX15TH120, shall be installed perpendicular between the main runners at 600mm centres to form a 1200 x 600mm module. If applicable, 600mm cross tees, 38 x 15mm ref DX15TH60, shall be installed perpendicular between the 1200mm cross tees to form a 600 x 600mm module. All cross tees feature a ‘joggled’ end detail.
Perimetertrims:29mm x 19mm painted HDG steel angle trim, ref MI 2919, fixed to perimeter wall using fixings appropriate to the structure at maximum 450mm centres. Corners shall normally be finished with a lapped or butt joint.
Hangers:Shall be from pre straightened 2mm diameter HDG steel wire, ref DSW2. Hangers shall be fixed through holes in stalk or bulb of main runner and wrapped around itself a minimum of 3 times. Alternatively, hangers can be formed from 25 x 25mm HDG steel angle section, ref DGA5, fixed to main runners using appropriate self drilling screws or nut and bolt fixings. Hangers shall be normally spaced at 1200mm centres although alternative spacings are acceptable provided maximum loadings stated above are not exceeded. Hangers to be fixed to structure or soffit using fixings appropriate to the structure or soffit.
Holddownclips:Where applicable, these shall be non removable type clips, ref VB45. These generally will only be required in certain fire protecting assemblies or where there is a risk of tile uplift. Where fitted, these should be applied to all grid members at a rate of 1 clip per 600mm of tile edge.
Tileedgessupported
DX15SystemComponents
Module Nr Description Itemreference 600x600 600x1200
➊ Main Runner DX15XH370 0.83 lin m 0.83 lin m
➋ 1200 Cross Tee DX15TH120 1.67 lin m 1.67 lin m
➌ 600 Cross Tee DX15TH60 0.83 lin m
➍ Hanger DSW2 0.70 pieces 0.70 pieces
Material needed for DX15 grid construction (per m2 ceiling)
DX15QuantityGuide:Refer to diagram on page 20
BSEN13964:2004Reactiontofire: A2‑s1, d0Corrosionclass: Class BFor further information on EN 13964, see page 42.
Module Mainrunnerat1200mm Mainrunnerat600mm „ Hangerdistance(mm) 600x600 600x1200 600x600 600x1200
800 24.0 24.2 - -
1000 24.0 24.2 54.0 54.2
1200 12.4 12.5 25.5 25.7
1500 4.5 4.7 9.8 10.0
Maximum allowed weight of tiles per m2 of ceiling
Note: The load per m2 must be distributed uniformly (no point loads) over the ceiling area. After loading, the deflection of any grid component will remain within the maximum deflection per span as stated in BS: 8290: 1991, provided the grid layout is as presented in the sketch.
Please consult USG for other layouts, load or hanger distance.
DX15 / FL DX15 / FLB
Main Runner DX15XH370
Long Cross Tee DX15TH120
Short Cross Tee DX15TH60
325
DONN® DX FinelineSystemcharacteristics:
• Innovative narrow profile slotted grid with 6.5mm reveal• Mitred joints offer clean, tailored appearance• Patented QUICK‑RELEASE™ cross tee connection • Easy attachment of partitions or signage directly to the grid• White/white as standard; other colour combinations available on request• Fast and simple to install, easily accessible• Compatible with FL edge ceiling tiles
SpecificationDONNDXFinelineGrid shall be DONN DXF Fineline exposed grid system, steel narrow profile slotted grid section with 6.5mm reveal. Table width 15mm. To suit module size 600 x 600mm.
Mainrunners:45 x 15mm, ref DXF300 shall be normally spaced at 1200mm centres and suspended from the structure or soffit using pre‑straightened 2mm diameter HDG steel wire hangers, ref DSW2, at typically 1200mm centres. First hanger shall be no more than 450mm from the perimeter. Main runners joined end on by means of the integral splice. Splice connections shall be supported within 150mm with a hanger, and shall be staggered across the ceiling area.
Crosstees:1200mm cross tees, 45 x 15mm ref DXF120, shall be installed perpendicular between the main runners at 600mm centres to form a 1200 x 600mm module. 600mm cross tees, 45 x 15mm ref DXF60, shall be installed perpendicular between the 1200mm cross tees to form a 600 x 600mm module. All cross tees feature mitred ends for continuity of reveal detail.
Perimetertrims:29mm x 19mm painted HDG steel angle trim, ref MI 2919, fixed to perimeter wall using fixings appropriate to the structure at maximum 450mm centres. Corners shall normally be finished with a lapped or butt joint.
Hangers:Shall be from pre straightened 2mm diameter HDG steel wire, ref DSW2. Hangers shall be fixed through holes in stalk or bulb of main runner and wrapped around itself a minimum of 3 times. Alternatively, hangers can be formed from 25 x 25mm HDG steel angle section, ref DGA5, fixed to main runners using appropriate self drilling screws or nut and bolt fixings. Hangers shall be normally spaced at 1200mm centres although alternative spacings are acceptable provided maximum loadings stated above are not exceeded. Hangers to be fixed to structure or soffit using fixings appropriate to the structure or soffit.
Holddownclips:Where applicable, these shall be non removable type clips, ref VB45. These generally will only be required in certain fire protecting assemblies or where there is a risk of tile uplift. Where fitted, these should be applied to all grid members at a rate of 1 clip per 600mm of tile edge.
Tileedgessupported
DXFinelineSystemComponents
Module Nr Description Itemreference 600x600
➊ Main Runner DXF300W 0.83 lin m
➋ Cross Tee DXF120W 1.67 lin m
➌ Cross Tee DXF60W 0.83 lin m
➍ Hanger DSW2 0.70 pieces
Material needed for DX Fineline grid construction (per m2 ceiling)
DXFinelineQuantityGuide:Refer to diagram on page 20
BSEN13964:2004Reactiontofire: A2‑s1, d0Corrosionclass: Class BFor further information on EN 13964, see page 42.
Module Mainrunnerat1200mm Mainrunnerat600mm „ Hangerdistance(mm) 600x600 600x600
800 25.5 -
1000 25.5 53.6
1200 12.0 25.1
1500 4.1 9.5
Maximum allowed weight of tiles per m2 of ceiling
Note: The load per m2 must be distributed uniformly (no point loads) over the ceiling area. After loading, the deflection of any grid component will remain within the maximum deflection per span as stated in BS: 8290: 1991, provided the grid layout is as presented in the sketch.
Please consult USG for other layouts, load or hanger distance.
DXF / FL
Main Runner DXF300
Long Cross Tee DXF120
Short Cross Tee DXF60
226
DONN® DX KB Corrosion ProtectedSystemcharacteristics:
• Exposed 24mm system• Ideal for high humidity environments or wet‑cleaned areas• Cross‑tees with override‑ends resist twisting and give professionally finished
look with no exposed steel edges• Patented QUICK‑RELEASE™ cross tees: easy to remove without tools • For applications requiring sustained exposure to high humidity
(e.g. >95% RH)• For applications requiring resistance to other corrosive atmospheres• Galvanised and painted construction with clip• Corrosion‑treated accessories available• Designed for fire rated ceilings.
SpecificationDONNDXKBGrid shall be DONN DX KB exposed grid system, hot dipped galvanised steel 'T' section with additional corrosion resistant coating and pre painted white aluminium capping. Table width 24mm. To suit variable module sizes, most typically 600 x 600mm and 1200 x 600mm.
Mainrunners:38 x 24mm, ref DX24XH370WK shall be normally spaced at 1200mm centres and suspended from the structure or soffit using 32 x 19mm corrosion resistant perimeter angle, ref MIA3219WK, at maximum 1200mm centres. First hanger shall be no more than 450mm from the perimeter. Main runners joined end on by means of the integral splice. Splice connections shall be supported within 150mm with a hanger, and shall be staggered across the ceiling area.
Crosstees:1200mm cross tees, 38 x 24mm ref DX24XH120WK, shall be installed perpendicular between the main runners at 600mm centres to form a 1200 x 600mm module. If applicable, 600mm cross tees, 38 x 24mm ref DX24XH60WK, shall be installed perpendicular between the 1200mm cross tees to form a 600 x 600mm module. All cross tees feature a ‘joggled’ end detail and corrosion resistant stainless steel DX clips.
Perimetertrims:32mm x 19mm hot dipped galvanised steel angle section with additional corrosion resistant coating and pre painted white aluminium capping, ref MIA3219WK, fixed to perimeter wall using fixings appropriate to the structure and environment at maximum 450mm centres. Corners shall normally be finished with a lapped or butt joint.
Hangers:Shall be from 32 x 19mm corrosion resistant perimeter angle, ref MIA3219WK, fixed to main runners using appropriate HDG steel self drilling screws or nut and bolt fixings. Hangers shall be normally spaced at 1200mm centres although alternative spacings are acceptable provided maximum loadings stated above are not exceeded. Hangers to be fixed to structure or soffit using fixings appropriate to the structure or soffit and environment.
Holddownclips:Where applicable, these shall be corrosion resistant clips, ref V17. These generally will only be required where there is a risk of tile uplift. Where fitted, these should be applied to all grid members at a rate of 1 clip per 600mm of tile edge.
Tileedgessupported
DXKBSystemComponents
Module Nr Description Itemreference 600x600 600x1200
➊ Main Runner DX24XH370WK 0.83 lin m 0.83 lin m
➋ 1200 Cross Tee DX24XH120WK 1.67 lin m 1.67 lin m
➌ 600 Cross Tee DX24XH60WK 0.83 lin m
➍ Hanger(corrosion resistant) MIA3219WK 0.70 pieces 0.70 pieces
Material needed for DX KB grid construction (per m2 ceiling)
DXKBQuantityGuide:Refer to diagram on page 20
Module Mainrunnerat1200mm Mainrunnerat600mm „ Hangerdistance(mm) 600x600 600x1200 600x600 600x1200
800 26.7 26.9 - -
1000 26.7 26.9 56.0 56.4
1200 12.6 12.9 26.4 26.7
1500 4.4 4.7 10.0 10.3
Maximum allowed weight of tiles per m2 of ceiling
Note: The load per m2 must be distributed uniformly (no point loads) over the ceiling area. After loading, the deflection of any grid component will remain within the maximum deflection per span as stated in BS: 8290: 1991, provided the grid layout is as presented in the sketch.
Please consult USG for other layouts, load or hanger distance.
DX24 / SLT DX24 / SQ DX24 / SLB
Main Runner DX24XH370WK
Long Cross Tee DX24XH120WK
Short Cross Tee DX24XH60WK
BSEN13964:2004Reactiontofire: A2‑s1, d0Corrosionclass: Class CFor further information on EN 13964, see page 42.
327
DONN® DX CE Controlled Environment Systemcharacteristics:
• Exposed 35mm system• Factory applied sealing gasket to provide dust seal for installed ceiling• Suitable for cleanroom Federal Spec. 209E class applications up to class
100 (when used with appropriate tile)• Wide profile for use with insulation lining panels and large module ceiling tiles• Cross‑tees with override‑ends resist twisting and give professionally finished
look with no exposed steel edges• Patented QUICK‑RELEASE™ cross tees: easy to remove without tools • Fast installation• Joggled (overriding) ends ensure no exposed metal edges• High gloss anti‑static paint finish for ease of cleaning • Colour options available to special order
SpecificationDONNDXCEGrid shall be DONN DX35CE controlled environment exposed grid system, hot dipped galvanised steel 'T' section with pre painted capping. Table width 35mm. To suit variable module sizes, most typically 600 x 600mm and 1200 x 600mm.
Mainrunners:38 x 35mm, ref DX35XH370‑CE shall be normally spaced at 1200mm centres and suspended from the structure or soffit using pre‑straightened 2mm diameter HDG steel wire hangers, ref DSW2, at typically 1200mm centres. First hanger shall be no more than 450mm from the perimeter. Main runners joined end on by means of the integral splice. Splice connections shall be supported within 150mm with a hanger, and shall be staggered across the ceiling area. Both flanges of the main runner will have factory applied 3mm thick foam strips to provide a flexible seal between flange and tile.
Crosstees:1200mm cross tees, 38 x 35mm ref DX35XH120‑CE, shall be installed perpendicular between the main runners at 600mm centres to form a 1200 x 600mm module. If applicable, 600mm cross tees, 38 x 35mm ref DX35XH60‑CE, shall be installed perpendicular between the 1200mm cross tees to form a 600 x 600mm module. All cross tees feature a ‘joggled’ end detail. Both flanges of all cross tees will have factory applied 3mm thick foam strips to provide a flexible seal between flange and tile. Perimeter trims: 29mm x 19mm painted HDG steel angle trim, ref MI 2919, fixed to perimeter wall using fixings appropriate the structure at maximum 450mm centres. Corners shall normally be finished with a butt joint. The horizontal flange of the trim will have factory applied 3mm thick foam strip to provide a flexible seal between flange and tile.
Hangers:Shall be from pre straightened 2mm diameter HDG steel wire, ref DSW2. Hangers shall be fixed through holes in stalk or bulb of main runner and wrapped around itself a minimum of 3 times. Alternatively, hangers can be formed from 25 x 25mm HDG steel angle section, ref DGA5, fixed to main runners using appropriate self drilling screws or nut and bolt fixings. Hangers shall be normally spaced at 1200mm centres although alternative spacings are acceptable provided maximum loadings stated above are not exceeded. Hangers to be fixed to structure or soffit using fixings appropriate to the structure or soffit.
Holddownclips:The use of clips is essential to ensure a seal of tile to grid. These shall be non‑removable type clips, ref VB45. These should be applied to all grid members, at a rate of 1 clip per 600mm of tile edge.
Tileedgessupported
DXCESystemComponents
BSEN13964:2004Reactiontofire: A2‑s1, d0Corrosionclass: Class BFor further information on EN 13964, see page 42.
Module Nr Description Itemreference 600x600 600x1200
➊ Main Runner DX35XH370W-CE 0.83 lin m 0.83 lin m
➋ 1200 Cross Tee DX35XH120W-CE 1.67 lin m 1.67 lin m
➌ 600 Cross Tee DX35XH60W-CE 0.83 lin m
➍ Hanger DSW2 0.70 pieces 0.70 pieces
Material needed for DX CE grid construction (per m2 ceiling)
DXCEQuantityGuide:Refer to diagram on page 20
DX35CE / SQ
Main Runner DX35XH370W-CE
Long Cross Tee DX35XH120W-CE
Short Cross Tee DX35XH60W-CE
Module Mainrunnerat1200mm Mainrunnerat600mm „ Hangerdistance(mm) 600x600 600x1200 600x600 600x1200
800 29.0 29.5 - -
1000 29.0 29.5 61.3 61.8
1200 13.6 13.9 28.7 29.1
1500 4.5 4.9 10.7 11.1
Maximum allowed weight of tiles per m2 of ceiling
Note: The load per m2 must be distributed uniformly (no point loads) over the ceiling area. After loading, the deflection of any grid component will remain within the maximum deflection per span as stated in BS: 8290: 1991, provided the grid layout is as presented in the sketch.
Please consult USG for other layouts, load or hanger distance.
228
DONN® DX EspaceSystemcharacteristics:
• Exposed 24mm system• 70mm high main runners enable high loading capacities for the system• Less hangers needed for standard modules• Span up to 2.5 metres between hangers • Special main tee splice allows easy extension of the system • Full compatibility with standard DX cross tees• 35mm wide option available to special order
SpecificationDONNDXEspaceGrid shall be DONN DX Espace exposed grid system for long span applications. Hot dipped galvanised steel 'T' section with pre painted capping. Table width 24mm. To suit variable module sizes, most typically 600 x 600mm and 1200 x 600mm.
Mainrunners:70 x 24mm, ref DXE24360W shall be normally spaced at 1200mm centres and suspended from the structure or soffit using 25 x 25mm HDG steel angle section, ref DGA5, fixed to a proprietary hanger ref PSS‑1 slotted onto the main runner bulb. First hanger shall be no more than 450mm from the perimeter. Main runners joined end on by means of the integral splice. Splice connections shall be supported within 150mm with a hanger, and shall be staggered across the ceiling area.
Crosstees:1200mm cross tees, 38 x 24mm ref DX24TH120, shall be installed perpendicular between the main runners at 600mm centres to form a 1200 x 600mm module. If applicable, 600mm cross tees, 25 x 24mm ref DX24TS60, shall be installed perpendicular between the 1200mm cross tees to form a 600 x 600mm module. All cross tees feature a ‘joggled’ end detail.
Perimetertrims:29mm x 19mm painted HDG steel angle trim, ref MI 2919, fixed to perimeter wall using fixings appropriate to the structure at maximum 450mm centres. Corners shall normally be finished with a lapped or butt joint.
Hangers:Shall be from 25 x 25mm HDG steel angle section, ref DGA5, fixed to a proprietary hanger ref PSS‑1 slotted onto the main runner bulb. Hangers can be spaced up to 2400mm apart provided maximum loadings stated above are not exceeded. Hangers to be fixed to structure or soffit using fixings appropriate to the structure or soffit.
Holddownclips:Where applicable, these shall be non removable type clips, ref VB45, fitted with cross tees only. These generally will only be required where there is a risk of tile uplift. Where fitted, these should be applied to cross tees only at a rate of 1 clip per 600mm of tile edge.
Tileedgessupported
DXEspaceSystemComponents
Module Nr Description Itemreference 600x600 600x1200
➊ Main Runner DXE24360W 0.83 lin m 0.83 lin m
➋ 1200 Cross Tee DXE24TH120W 1.67 lin m 1.67 lin m
➌ 600 Cross Tee DXE24TS60W 0.83 lin m
➍ Hanger(corrosion resistant) PSS1 0.35 pieces* 0.35 pieces*
Material needed for DX Espace grid construction (per m2 ceiling)
DXEspaceQuantityGuide:Refer to diagram on page 20
BSEN13964:2004Reactiontofire: A2‑s1, d0Corrosionclass: Class BFor further information on EN 13964, see page 42.
Module Mainrunnerat1200mm Mainrunnerat600mm „ Hangerdistance(mm) 600x600 600x1200 600x600 600x1200
1500 23.8 24 - -
1800 22.5 22.6 45.7 46.0
2100 11.5 11.6 23.8 24.0
2400 6.2 6.3 13.1 13.4
Maximum allowed weight of tiles per m2 of ceiling
Note: The load per m2 must be distributed uniformly (no point loads) over the ceiling area. After loading, the deflection of any grid component will remain within the maximum deflection per span as stated in BS: 8290: 1991, provided the grid layout is as presented in the sketch.
Please consult USG for other layouts, load or hanger distance.
*Based upon hanger spacing at 2400mm.
DXE24 / SLT DXE24 / SQ
Main Runner DXE24360W
Long Cross Tee DX24TH120W
Short Cross Tee DX24TS60W
329
DONN® DX35Systemcharacteristics:
• Exposed 35mm system• Wide profile for use with insulation lining panels and large module ceiling tiles• Cross‑tees with override‑ends resist twisting and give professionally finished
look with no exposed steel edges• Patented QUICK‑RELEASE™ cross tees: easy to remove without tools • Fast installation• Joggled (overriding) ends ensure no exposed metal edges• Available in galvanised finish and white painted• Additional features available in the following systems: ‑ DONN DX CE controlled environment system
SpecificationDONNDX35Grid shall be DONN DX35 exposed grid system, hot dipped galvanised steel 'T' section with pre painted capping. Table width 35mm. To suit variable module sizes, most typically 600 x 600mm and 1200 x 600mm.
Mainrunners:38 x 35mm, ref DX35XH370 shall be normally spaced at 1200mm centres and suspended from the structure or soffit using pre‑straightened 2mm diameter HDG steel wire hangers, ref DSW2, at typically 1200mm centres. First hanger shall be no more than 450mm from the perimeter. Main runners joined end on by means of the integral splice. Splice connections shall be supported within 150mm with a hanger, and shall be staggered across the ceiling area.
Crosstees:1200mm cross tees, 38 x 35mm ref DX35XH120, shall be installed perpendicular between the main runners at 600mm centres to form a 1200 x 600mm module. If applicable, 600mm cross tees, 38 x 35mm ref DX35XH60, shall be installed perpendicular between the 1200mm cross tees to form a 600 x 600mm module. All cross tees feature a ‘joggled’ end detail.
Perimetertrims: 29mm x 19mm painted HDG steel angle trim, ref MI 2919, fixed to perimeter wall using fixings appropriate to the structure at maximum 450mm centres. Corners shall normally be finished with a lapped or butt joint.
Hangers:Shall be from pre straightened 2mm diameter HDG steel wire, ref DSW2. Hangers shall be fixed through holes in stalk or bulb of main runner and wrapped around itself a minimum of 3 times. Alternatively, hangers can be formed from 25 x 25mm HDG steel angle section, ref DGA5, fixed to main runners using appropriate self drilling screws or nut and bolt fixings. Hangers shall be normally spaced at 1200mm centres although alternative spacings are acceptable provided maximum loadings stated above are not exceeded. Hangers to be fixed to structure or soffit using fixings appropriate to the structure or soffit.
Holddownclips:Where applicable, these shall be non removable type clips, ref VB45. These generally will only be required in certain fire protecting assemblies or where there is a risk of tile uplift. Where fitted, these should be applied to all grid members at a rate of 1 clip per 600mm of tile edge.
Tileedgessupported
DX35SystemComponents
BSEN13964:2004Reactiontofire: A2‑s1, d0Corrosionclass: Class BFor further information on EN 13964, see page 42.
Module Nr Description Itemreference 600x600 600x1200
➊ Main Runner DX35XH370W-CE 0.83 lin m 0.83 lin m
➋ 1200 Cross Tee DX35XH120W-CE 1.67 lin m 1.67 lin m
➌ 600 Cross Tee DX35XH60W-CE 0.83 lin m
➍ Hanger DSW2 0.70 pieces 0.70 pieces
Material needed for DX35 grid construction (per m2 ceiling)
DX35QuantityGuide:Refer to diagram on page 20
Module Mainrunnerat1200mm Mainrunnerat600mm „ Hangerdistance(mm) 600x600 600x1200 600x600 600x1200
800 29.0 29.5 - -
1000 29.0 29.5 61.3 61.8
1200 13.6 13.9 28.7 29.1
1500 4.5 4.9 10.7 11.1
Maximum allowed weight of tiles per m2 of ceiling
Note: The load per m2 must be distributed uniformly (no point loads) over the ceiling area. After loading, the deflection of any grid component will remain within the maximum deflection per span as stated in BS: 8290: 1991, provided the grid layout is as presented in the sketch.
Please consult USG for other layouts, load or hanger distance.
DX35 / SQ
Main Runner DX35XH370W
Long Cross Tee DX35XH120W
Short Cross Tee DX35XH60W
230
Short Cross Tee DXSF60 (where applicable)
Long Cross Tee DXSF120
Main Runner DXSF360
40mm
40mm
40mm
40mm
DONN® DX Screw FixSystemcharacteristics:
• Fast and simple to install – up to 50% faster when compared to conventional gypsum ceiling suspension systems
• Pre‑indexed hole locations on main tees reducing measuring, aligning and squaring time
• Pre‑engineered splice – eliminating overlap waste and connection time• Patented QUICK‑RELEASE™ clip design: easy to remove without tools• Knurled face on DX components – easier screw attachment• System flexibility – easy transitions from soffits, flat and curved surfaces
Easy transitions to acoustical ceilings and USG speciality range, Curvatura, Compässo
• Designed for fire rated ceilings ‑ contact USG Technical dept for further details• Multi transitional features including borders to acoustical ceilings, boxed
soffits, upstands etc. • See DONN DXSF technical guide brochure for details
SpecificationDONNDXScrewFixGrid shall be DONN DXSF Screw Fix concealed grid system for fixing of gypsum and other boards. Hot dipped galvanised steel 'T' section with knurled hot dipped galvanised steel capping for easier screw attachment. Table width 35mm. To suit variable module sizes, most typically accomodating board sizes 1800 x 900mm and 2400 x 1200mm.
Mainrunners:38 x 35mm, ref DXSF360 shall be normally spaced at 1200mm centres and suspended from the structure or soffit using 25 x 25mm HDG steel angle section, ref DGA5, fixed to main runners using appropriate self drilling screws or nut and bolt fixings, at typically 1200mm centres. First hanger shall be no more than 450mm from the perimeter. Main runners joined end on by means of the integral splice. Splice connections shall be supported within 150mm with a hanger, and shall be staggered across the ceiling area.
Crosstees:1200mm cross tees, 38 x 40mm ref DXSF120, shall be installed perpendicular between the main runners at either 450mm or 600mm centres dependant upon the board size being used. All cross tees feature a ‘joggled’ end detail.
Perimetertrims:41 x 30 x 19mm knurled hot dipped galvanised steel channel trim ref DCSF41X30X19, fixed to perimeter wall using fixings appropriate to the structure at maximum 450mm centres. Cut ends of main runner or cross tees will fit into the web of the channel to be held secure when fixing boards up to the grid.
Hangers:Shall be 25 x 25mm HDG steel angle section, ref DGA5, fixed to main runners using appropriate self drilling screws or nut and bolt fixings. Hangers shall be normally spaced at 1200mm centres although alternative spacings are acceptable provided maximum loadings stated above are not exceeded. Hangers to be fixed to structure or soffit using fixings appropriate to the structure or soffit.
Tileedgessupported
DXScrewFixSystemComponents
Module Nr Description Itemreference 1800x900 2400x1200
➊ Main Runner DXSF360 0.833 lin m 0.833 lin m
➋ 1200 Cross Tee DXSF120 2.23 lin m 1.66 lin m
➌ Perimeter Channel DCSF41X30X19
➍ Rigid Hanger DGA5 0.694 no 0.694 no
Material needed for DX Screw Fix grid construction (per m2 ceiling)
DXScrewFixQuantityGuide:Refer to diagram on page 20
Module Mainrunnerat1200mm Mainrunnerat600mm „ Hangerdistance(mm) 1800x900 2400x1200 1800x900 2400x1200
800 36.2 36.93 - -
1000 36.2 36.93 - -
1200 19.46 19.85 38.91 39.7
1500 7.01 7.15 14.01 14.3
Maximum allowed weight of tiles per m2 of ceiling
Note: The load per m2 must be distributed uniformly (no point loads) over the ceiling area. After loading, the deflection of any grid component will remain within the maximum deflection per span as stated in BS: 8290: 1991, provided the grid layout is as presented in the sketch. Maximum loads above have been determined by calculation.
331
Type Wallsuspension Item PSS-2 Profile DX Espace Other profile - Dynamic load* 250 N Min. length** N/A
Type Butterflyspring Item SA-50 Profile DX24 Other profile DX15, DX35, DX Fineline Dynamic load* 150 N Min. length** 220mm
Item PSS-1 Combination with Threaded rod M6 Profile DC Espace Other profile DX Espace Dynamic load* 250 N Min. length** 200mm
Type 90°hanger
Type Galv.Anglesection Item DGA5 Combination with M4 roofing quality nut and bolt Profile DX24 Other Profile DX15, DX35, DX Fineline Dynamic load* 150 N Min. Length** 75mm
2
Type Anglesection/corrosionprotected Item MIA3219WK Combination with M4 roofing quality nut and bolt Profile DX WK Other Profile - Dynamic load* 150 N Min. Length** 75mm
3
Type SuspensionWire Item DSW2 Combination with - Profile DX24 Other Profile DX15, DX35, DX Fineline Dynamic load* 250 N Min. Length** 80mm
1
4
5 6
Suspension (hanger) options
232
Type ItemRef a b c d Thickness Length Colour*
➊ MI1919 19 19 - - 0.6 3000 Y
➊ MI2020 20 20 - - 0.5 3000 P
➊ MI2919 29 19 - - 0.6 3000 W, P, Y
➊ MI5025 50 25 - - 0.7 3000 W, Y
➋ MIA3219 32 19 - - 0.6 3000 L, A, M, Q, WK
➌ MS11 19 9 9 19 0.6 3000 W, Y
➌ MS12 20 12 20 20 0.7 3000 W
➌ MS15 15 15 8 25 0.6 3000 Y
➍ MF8 13 16 27 42 0.5 3000 W, Y
➍ MF10 16 16 30 39 0.5 3000 W, Y
➎ MUS22 38 19 19 - 0.5 3000 W, Y
➎ MUS25 40 25 13 - 0.5 3000 Y
➏ MJ14 14 7 29 - 0.5 3000 W, Y
➐ DCSF41X30X19(1) 30 41 19 - 0.5 3600 S
*Colour code: W = white; Y = 9010; A = aluminium; L = black; M = chrome; P = platinum; Q = bright gold; S = steel (no paint); WK = corrosion-protected. (1) Measurements are nominal.
Perimeteroptions
Dimensions in mm
➊ MI
➎ MUS ➐ DCSF41X30X19➏ MJ
➋ MIA ➌ MS ➍ MF
BS EN 13964:2004Reaction to fire: A2‑s1,d0Corrosion class: Class BFor further information on EN 13964, see page 42.
Perimeter trims
3
Grid-Edge DX24-SQPerimetertrim MIApplication L-trim Economic version
Perimeter tile is square cut to sit into grid as per all other edges. Combination with a black painted wood lath. Look is nearly similar to a Shadowline trim.
Grid-Edge DX24-SQPerimetertrim MSApplication Shadowline trim
Perimeter tile is square cut to sit into grid as per all other edges. The grid and tile to be sited on the bottom flange of the Shadowline trim.
Grid-Edge DX24-SQPerimetertrim MF Application Perimeter trim to create upstand trim section. Perimeter
tile is square cut. Use plasterboard to do vertical ceiling. The grid and tile to be sited on the bottom flange of the trim.
Grid-Edge DX24-SQPerimetertrim Curved trim (not
manufactured by USG)Application Perimeter tile is square cut. The grid and tile to be sited
on curved trim.
Grid-Edge DX24-SQPerimetertrim MIApplication L-trim Economic version
Perimeter tile is square cut to sit into grid as per all other edges. L-trim Economic version before Perimeter
Perimeterapplicationdetails
L-trim-typicalapplicationsofoptions➊ ➋
Shadowlinetrim-typicalapplicationsofoption➌
Grid-Edge DX24-SLTPerimetertrim MIApplication L-trim Economic version
Perimeter tile is cut with a rebated edge to offer full support on all 4 edges of the tile. Face of the tile will finish proud of the button face of the grid.
Grid-Edge DX24-SLTPerimetertrim MSApplication Shadowline trim
Perimeter tile is square cut. Cut edge to be sited on bottom flange of the Shadowline trim. Face of the tile will finish flush with the bottom face of the trim. The grid member will be sited on the upper horizontal flange of the Shadowline trim
Grid-Edge DX24-SLTPerimetertrim MJApplication J-trim Economic version
Perimeter tile is cut with a rebated edge as normal to offer a full support on all 4 edges. Face of the tile will finish level with the bottom face of the 'J' mould.
F-trim-typicalapplicationsofoption➍Shadowlinetrim-typicalapplicationsofoption➌
Applicationtips• Perimeter trims must be fixed to the perimeter wall at max. 350mm centres. • DX and tile must lay on 2/3 of perimeter trim• Use thicker material (0.6mm to 1mm) if the wall is not levelled exactly. • Use pan head screw to fix the perimeter trim ‑ do not use gypsum screws.
X-trim-typicalapplicationsofoption➎
33
Project: J D Wetherspoon public house, Camberley High Street
Architect: Tuffin Ferraby and Taylor
Contractor: Centre Ceilings
·
Project:Beach Volleyball Olympic Stadium, Athens, Greece
Architect:Thymio Papayannis & Associates
Contractor:Abdul Azim Weiss
„
CurvaturaTM 3-D Ceiling System
34
TheCurvaturaTM3-DSystemgivesyouthefreedomtocreatedramaticthree-dimensionalcurveddesignsthatcombineshape,textureandlighting.Thesystem’scurvedmainteesegments,sus-pensionprofiles,optionaledgetrimandflexibleinfillpanelsprovideendlesspossibilitiestocreatebeautifulanddramaticdesigns.
"Havingseentheceilingsystemonpaper,itisrewardingtobeabletousetheUSGsysteminanactualapplication,andthefinishedresultworksextremelywell."
Nikki Pearce of Tuffin Ferraby and Taylor
uCurvatura™ 3-D Ceiling SystemProduct and Project Details
Curvatura™ 3-D Ceiling System:The Curvatura™ 3-D System gives you the freedom tocreate dramatic three-dimensional curved designs thatcombine shape, texture and lighting. The system'scurved main tee segments, suspension profiles,optional edge trim and flexible infill panels provideendless possibilities to create beautiful and dramaticdesigns.
System Characteristics:➚ One directional panels (galvanised steel) to create
an almost invisible seam.
➚ Pre-engineered system components to eliminate onsite fabrication.
➚ Collection of 16 curved vault, 16 curved valley and 4straight main tee segments.
➚ Patented QUICK-RELEASE™ clip design: easy toremove without tools (cross tees).
➚ Range of perforated panels in any standard colourfrom the RAL or BS range.
➚ Optional edge trim for tidy finish.
USG (UK) Ltd 1 Swan Road, South West Industrial Estate, Peterlee, Co. Durham. SR8 2HSTel: +44 (0)191 586 1121 Fax: +44 (0)191 586 0097 www.usg.com/europe e-mail: [email protected]
Curv
atur
aPu
blic
Hou
se
Optional perimeter trim
curved trimsection➚
corner cap➚
straight trim section➚
fascia clip➚
integral attachment clip➚
Curvatura™ curvedmain tee segment
Curvatura™cross tee
➚ ➚
57mm
stabilizerbar
➚
edge trim➚
valley
panel seam with infillpanel splice above
➚
600 x 1800mm panelsslide under stabilizer bars
➚
stabilizerbar
➚
stabilizerbar
➚
vault➚
➚
➚
integralhold down tab➚
splice
J.D. Wetherspoon Case Study 23/9/04 4:50 pm Page 2
uCurvatura™ 3-D Ceiling SystemProduct and Project Details
Curvatura™ 3-D Ceiling System:The Curvatura™ 3-D System gives you the freedom tocreate dramatic three-dimensional curved designs thatcombine shape, texture and lighting. The system'scurved main tee segments, suspension profiles,optional edge trim and flexible infill panels provideendless possibilities to create beautiful and dramaticdesigns.
System Characteristics:➚ One directional panels (galvanised steel) to create
an almost invisible seam.
➚ Pre-engineered system components to eliminate onsite fabrication.
➚ Collection of 16 curved vault, 16 curved valley and 4straight main tee segments.
➚ Patented QUICK-RELEASE™ clip design: easy toremove without tools (cross tees).
➚ Range of perforated panels in any standard colourfrom the RAL or BS range.
➚ Optional edge trim for tidy finish.
USG (UK) Ltd 1 Swan Road, South West Industrial Estate, Peterlee, Co. Durham. SR8 2HSTel: +44 (0)191 586 1121 Fax: +44 (0)191 586 0097 www.usg.com/europe e-mail: [email protected]
Curv
atur
aPu
blic
Hou
se
Optional perimeter trim
curved trimsection➚
corner cap➚
straight trim section➚
fascia clip➚
integral attachment clip➚
Curvatura™ curvedmain tee segment
Curvatura™cross tee
➚ ➚
57mm
stabilizerbar
➚
edge trim➚
valley
panel seam with infillpanel splice above
➚
600 x 1800mm panelsslide under stabilizer bars
➚
stabilizerbar
➚
stabilizerbar
➚
vault➚
➚
➚
integralhold down tab➚
splice
J.D. Wetherspoon Case Study 23/9/04 4:50 pm Page 2
uCurvatura™ 3-D Ceiling SystemProduct and Project Details
Curvatura™ 3-D Ceiling System:The Curvatura™ 3-D System gives you the freedom tocreate dramatic three-dimensional curved designs thatcombine shape, texture and lighting. The system'scurved main tee segments, suspension profiles,optional edge trim and flexible infill panels provideendless possibilities to create beautiful and dramaticdesigns.
System Characteristics:➚ One directional panels (galvanised steel) to create
an almost invisible seam.
➚ Pre-engineered system components to eliminate onsite fabrication.
➚ Collection of 16 curved vault, 16 curved valley and 4straight main tee segments.
➚ Patented QUICK-RELEASE™ clip design: easy toremove without tools (cross tees).
➚ Range of perforated panels in any standard colourfrom the RAL or BS range.
➚ Optional edge trim for tidy finish.
USG (UK) Ltd 1 Swan Road, South West Industrial Estate, Peterlee, Co. Durham. SR8 2HSTel: +44 (0)191 586 1121 Fax: +44 (0)191 586 0097 www.usg.com/europe e-mail: [email protected]
Curv
atur
aPu
blic
Hou
se
Optional perimeter trim
curved trimsection➚
corner cap➚
straight trim section➚
fascia clip➚
integral attachment clip➚
Curvatura™ curvedmain tee segment
Curvatura™cross tee
➚ ➚
57mm
stabilizerbar
➚
edge trim➚
valley
panel seam with infillpanel splice above
➚
600 x 1800mm panelsslide under stabilizer bars
➚
stabilizerbar
➚
stabilizerbar
➚
vault➚
➚
➚
integralhold down tab➚
splice
J.D. Wetherspoon Case Study 23/9/04 4:50 pm Page 2
Curvatura™ detail
"TherewasnootherproductlikeCurvaturaceilingsystemthatcouldmeetthearchitectsrequirementandtheirvisionfortheproject."
Christostomos Ntouyias. Civil Engineer for Terna SA.
SystemCharacteristics:■ One directional panels (galvanised steel) to create an almost invisible seam.■ Pre‑engineered system components to eliminate on site fabrication.■ Collection of 16 curved vault, 16 curved valley and 4 straight main tee segments.■ Patented QUICK‑RELEASETM clip design: easy to remove without tools (cross tees).■ Range of perforated panels in any standard colour from the RAL or BS range.■ Optional edge trim for tidy finish.
35
uCurvatura™ 3-D Ceiling SystemProduct and Project Details
Curvatura™ 3-D Ceiling System:The Curvatura™ 3-D System gives you the freedom tocreate dramatic three-dimensional curved designs thatcombine shape, texture and lighting. The system'scurved main tee segments, suspension profiles,optional edge trim and flexible infill panels provideendless possibilities to create beautiful and dramaticdesigns.
System Characteristics:➚ One directional panels (galvanised steel) to create
an almost invisible seam.
➚ Pre-engineered system components to eliminate onsite fabrication.
➚ Collection of 16 curved vault, 16 curved valley and 4straight main tee segments.
➚ Patented QUICK-RELEASE™ clip design: easy toremove without tools (cross tees).
➚ Range of perforated panels in any standard colourfrom the RAL or BS range.
➚ Optional edge trim for tidy finish.
USG (UK) Ltd 1 Swan Road, South West Industrial Estate, Peterlee, Co. Durham. SR8 2HSTel: +44 (0)191 586 1121 Fax: +44 (0)191 586 0097 www.usg.com/europe e-mail: [email protected]
Curv
atur
aPu
blic
Hou
se
Optional perimeter trim
curved trimsection➚
corner cap➚
straight trim section➚
fascia clip➚
integral attachment clip➚
Curvatura™ curvedmain tee segment
Curvatura™cross tee
➚ ➚
57mm
stabilizerbar
➚
edge trim➚
valley
panel seam with infillpanel splice above
➚
600 x 1800mm panelsslide under stabilizer bars
➚stabilizer
bar
➚
stabilizerbar
➚
vault➚
➚
➚
integralhold down tab➚
splice
J.D. Wetherspoon Case Study 23/9/04 4:50 pm Page 2
Project:Charles Trevelyan College, Newcastle Upon Tyne, England
Architect:Anthony Keith Associates
Contractor:Decke Newcastle
·
Project:Peter Green Furnishings, Reading, England
Architect:Roberts Brindley
Contractor:FC Contracts
„
Compässo Curved Ceiling Trim
36
Compässocurvedceilingtrimallowsyoutocreateentirelynewceilingdesigns,includingcurvededges,floatingislands,andraisedanddroppedceilingfeatures.SimplysketchoutyourrequirementsandfaxthemtoUSGandourteamofArchitecturallytrainedtechnicianswillpreparedesignschemesandworkingdrawingsforyourspecialityceilingproject.
"WeweredelightedwiththecompässosystembecausewithUSG'shelpwewereabletorealisetheoriginalvisiontransformingthecollegefoyerfromagloomy1960liftlobby"
Tony Keith. Anthony Keith Associates, Gosforth.
uCompässo Curved Ceiling TrimProduct and Project Details
Compässo Curved Ceiling Trim:Compässo curved ceiling trim allows you to createentirely new ceiling designs, including curved edges,floating islands, and raised and dropped ceilingfeatures. Simply sketch out your requirements and faxthem to USG and our team of Architecturally trainedtechnicians will prepare design schemes and workingdrawings for your speciality ceiling project.
System Characteristics:� Custom designed free floating ceiling system.
� Combine straight and curved pieces to form aceiling perimeter for floating ceilings.
� Square, triangle. rectangle and curved formationsavailable.
� Trim depths: 57mm, 100mm, 150mm and 200mm.
� Pre-engineered components supplied in kit form.
� Can be used with exposed acoustical and concealedsystems.
� Available in any standard colour from RAL or BScolour range.
USG (UK) Ltd 1 Swan Road, South West Industrial Estate, Peterlee, Co. Durham. SR8 2HSTel: +44 (0)191 586 1121 Fax: +44 (0)191 586 0097 www.usg.com/europe e-mail: [email protected]
Com
päss
oEd
ucat
ion
Splice detail
Trim depths
COMPÄSSO trim
57mm Trim
100mm Trim
150, 200mm Trim
57mm
100mm
150, 200mm
COMPÄSSO splice plate
➚
➚
COMPÄSSOsplice plate
Main tee cross tee
COMPÄSSOattachmentclip
field-cut panel
COMPÄSSO trim➚
➚
➚ ➚
➚
➚
Grid detailIntersecting Tee Connection
Trevelyan College Case Study 17/5/04 4:12 pm Page 2
uCompässo Curved Ceiling TrimProduct and Project Details
Compässo Curved Ceiling Trim:Compässo curved ceiling trim allows you to createentirely new ceiling designs, including curved edges,floating islands, and raised and dropped ceilingfeatures. Simply sketch out your requirements and faxthem to USG and our team of Architecturally trainedtechnicians will prepare design schemes and workingdrawings for your speciality ceiling project.
System Characteristics:� Custom designed free floating ceiling system.
� Combine straight and curved pieces to form aceiling perimeter for floating ceilings.
� Square, triangle. rectangle and curved formationsavailable.
� Trim depths: 57mm, 100mm, 150mm and 200mm.
� Pre-engineered components supplied in kit form.
� Can be used with exposed acoustical and concealedsystems.
� Available in any standard colour from RAL or BScolour range.
USG (UK) Ltd 1 Swan Road, South West Industrial Estate, Peterlee, Co. Durham. SR8 2HSTel: +44 (0)191 586 1121 Fax: +44 (0)191 586 0097 www.usg.com/europe e-mail: [email protected]
Com
päss
oRe
tail
Splice detail
Trim depths
COMPÄSSO trim
57mm Trim
100mm Trim
150, 200mm Trim
57mm
100mm
150, 200mm
COMPÄSSO splice plate
➚
➚
COMPÄSSOsplice plate
Main tee cross tee
COMPÄSSOattachmentclip
field-cut panel
COMPÄSSO trim➚
➚
➚ ➚
➚
➚
Tile edge supportConnection Detail
Peter Green Case Study 17/5/04 4:14 pm Page 2
"Wewantedtocreateadistinctiveenvironment"
Steve Horn. General Manager at Peter Green.
SystemCharacteristics:■ Custom designed free floating ceiling system.■ Combine straight and curved pieces to form a ceiling perimeter for floating ceilings.■ Square, triangle. rectangle and curved formations available.■ Trim depths: 57mm, 100mm, 150mm and 200mm.■ Pre‑engineered components supplied in kit form.■ Can be used with exposed acoustical and concealed systems.■ Available in any standard colour from RAL or BS colour range.
37
Connection-IntersectingTee
100mmTrim
150,200mmTrim
57mmTrim
COMPÄSSO trim
COMPÄSSO splice plate
Compässosplicedetail
100mmTrim
150,200mmTrim
57mmTrim
COMPÄSSO trim
COMPÄSSO splice plate
Compässosplicedetail
uCompässo Curved Ceiling TrimProduct and Project Details
Compässo Curved Ceiling Trim:Compässo curved ceiling trim allows you to createentirely new ceiling designs, including curved edges,floating islands, and raised and dropped ceilingfeatures. Simply sketch out your requirements and faxthem to USG and our team of Architecturally trainedtechnicians will prepare design schemes and workingdrawings for your speciality ceiling project.
System Characteristics:� Custom designed free floating ceiling system.
� Combine straight and curved pieces to form aceiling perimeter for floating ceilings.
� Square, triangle. rectangle and curved formationsavailable.
� Trim depths: 57mm, 100mm, 150mm and 200mm.
� Pre-engineered components supplied in kit form.
� Can be used with exposed acoustical and concealedsystems.
� Available in any standard colour from RAL or BScolour range.
USG (UK) Ltd 1 Swan Road, South West Industrial Estate, Peterlee, Co. Durham. SR8 2HSTel: +44 (0)191 586 1121 Fax: +44 (0)191 586 0097 www.usg.com/europe e-mail: [email protected]
Com
päss
oEd
ucat
ion
Splice detail
Trim depths
COMPÄSSO trim
57mm Trim
100mm Trim
150, 200mm Trim
57mm
100mm
150, 200mm
COMPÄSSO splice plate
➚
➚
COMPÄSSOsplice plate
Main tee cross tee
COMPÄSSOattachmentclip
field-cut panel
COMPÄSSO trim➚
➚
➚ ➚
➚
➚
Grid detailIntersecting Tee Connection
Trevelyan College Case Study 17/5/04 4:12 pm Page 2
uCompässo Curved Ceiling TrimProduct and Project Details
Compässo Curved Ceiling Trim:Compässo curved ceiling trim allows you to createentirely new ceiling designs, including curved edges,floating islands, and raised and dropped ceilingfeatures. Simply sketch out your requirements and faxthem to USG and our team of Architecturally trainedtechnicians will prepare design schemes and workingdrawings for your speciality ceiling project.
System Characteristics:� Custom designed free floating ceiling system.
� Combine straight and curved pieces to form aceiling perimeter for floating ceilings.
� Square, triangle. rectangle and curved formationsavailable.
� Trim depths: 57mm, 100mm, 150mm and 200mm.
� Pre-engineered components supplied in kit form.
� Can be used with exposed acoustical and concealedsystems.
� Available in any standard colour from RAL or BScolour range.
USG (UK) Ltd 1 Swan Road, South West Industrial Estate, Peterlee, Co. Durham. SR8 2HSTel: +44 (0)191 586 1121 Fax: +44 (0)191 586 0097 www.usg.com/europe e-mail: [email protected]
Com
päss
oEd
ucat
ion
Splice detail
Trim depths
COMPÄSSO trim
57mm Trim
100mm Trim
150, 200mm Trim
57mm
100mm
150, 200mm
COMPÄSSO splice plate
➚
➚
COMPÄSSOsplice plate
Main tee cross tee
COMPÄSSOattachmentclip
field-cut panel
COMPÄSSO trim➚
➚
➚ ➚
➚
➚
Grid detailIntersecting Tee Connection
Trevelyan College Case Study 17/5/04 4:12 pm Page 2
2
DONN ® Grid Options
Cadre Traditional
SL/DX24G
DescriptionAccessible gypsum ceiling system with ornate moulded picture frame design.
•
Acoustical performanceItem NoSize(mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
---CD 370M600 x 600SL >=80% White GCadre Traditional
* Type:
ApplicationsEducation•Hotels•Healthcare•Leisure•
Features and BenefitsElegant embossed picture frame design, ideal for opulent or classical interiors
•
USG Hydrocal FGR 95, exclusively formulated alpha plaster for superior definition of ornate detail, high strength and durability
•
Non combustible, non toxic composition. USA coast guard certified for marine applications per 164.009/329/0
•
High humidity resistant, suitable for applications with intermittent heating and cooling. May be installed early in the building program
•
100% access to plenum services•
Office•Retail•
CompositionTile is a moulded blend of glass fibre reinforced gypsum prefinished with top coat paint. Material safety data sheet available on request.
Fire reactionBS 476 Pt 6/7 Class 1/0
Humidity ResistanceMaximum 95% RH / 32°C
Weight10 kg/m²
MaintenanceEasily cleaned using soft brush, vacuum or damp sponge.
GB/CAD/TRA-00 21-03-200781638
Cadre Traditional
3
DONN ® Grid Options
Cadre Traditional
SL/DX24G
DescriptionAccessible gypsum ceiling system with ornate moulded picture frame design.
•
Acoustical performanceItem NoSize(mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
---CD 370M600 x 600SL >=80% White GCadre Traditional
* Type:
ApplicationsEducation•Hotels•Healthcare•Leisure•
Features and BenefitsElegant embossed picture frame design, ideal for opulent or classical interiors
•
USG Hydrocal FGR 95, exclusively formulated alpha plaster for superior definition of ornate detail, high strength and durability
•
Non combustible, non toxic composition. USA coast guard certified for marine applications per 164.009/329/0
•
High humidity resistant, suitable for applications with intermittent heating and cooling. May be installed early in the building program
•
100% access to plenum services•
Office•Retail•
CompositionTile is a moulded blend of glass fibre reinforced gypsum prefinished with top coat paint. Material safety data sheet available on request.
Fire reactionBS 476 Pt 6/7 Class 1/0
Humidity ResistanceMaximum 95% RH / 32°C
Weight10 kg/m²
MaintenanceEasily cleaned using soft brush, vacuum or damp sponge.
GB/CAD/TRA-00 21-03-200739
Cadre Rosette
DONN ® Grid Options
Cadre Rosette
SL/DX24G
DescriptionAccessible gypsum ceiling system with ornate moulded floral design.
•
Acoustical performanceItem NoSize(mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
---CD 390M600 x 600SL >=80% White GCadre Rosette
* Type:
ApplicationsEducation•Healthcare•Hotels•Leisure•
Features and BenefitsElegant embossed floral design with delicate scalloped edge relief, ideal for opulent or classical interiors
•
USG Hydrocal FGR 95, exclusively formulated alpha plaster for superior definition of ornate detail, high strength and durability
•
Non combustible, non toxic composition. USA coast guard certified for marine applications per 164.009/329/0
•
High humidity resistant, suitable for applications with intermittent heating and cooling. May be installed early in the building program
•
100% access to plenum services•
Office•Retail•
CompositionTile is a moulded blend of glass fibre reinforced gypsum prefinished with top coat paint. Material safety data sheet available on request.
Fire reactionBS 476 Pt 6/7 Class 1/0
Humidity ResistanceMaximum 95% RH / 32°C
Weight10 kg/m²
MaintenanceEasily cleaned using soft brush, vacuum or damp sponge.
GB/CAD/ROS-00 21-03-2007
DONN ® Grid Options
Quadra Crown Coffer
Quadra/DX15
SQuadra/DX24
T
DescriptionAccessible gypsum ceiling system with ornate moulded coffered design.
•
Acoustical performanceItem NoSize(mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
--QD 220M600 x 600SL/FL >=75% White S,TQuadra Crown Coffer
* Type
ApplicationsEducation•Healthcare•Hotels•Leisure•
Features and BenefitsElegant open coffer with bold stepped relief can be combined with optional acoustical panel for sound absorption
•
Unique combination edge detail means panels can be installed on DX24 or DX15 grids, ideal for renovation projects
•
USG Hydrocal FGR 95, exclusively formulated alpha plaster for superior definition of ornate detail, high strength and durability
•
Non combustible, non toxic composition. USA coast guard certified for marine applications per 164.009/329/0
•
High humidity resistant, suitable for applications with intermittent heating and cooling. May be installed early in the building program
•
100% access to plenum services•
Office•Retail•
CompositionTile is a moulded blend of glass fibre reinforced gypsum prefinished with top coat paint. Material safety data sheet available on request.
Fire reactionBS 476 Pt 6/7 Class 1/0
Humidity ResistanceMaximum 95% RH / 32°C
Weight10 kg/m²
MaintenanceEasily cleaned using soft brush, vacuum or damp sponge.
GB/QUAD-00 21-03-200781640
Quadra Crown Coffer
DONN ® Grid Options
Quadra Crown Coffer
Quadra/DX15
SQuadra/DX24
T
DescriptionAccessible gypsum ceiling system with ornate moulded coffered design.
•
Acoustical performanceItem NoSize(mm)Edge LR Colour Grid optionPattern Type *DncW…WNRC
--QD 220M600 x 600SL/FL >=75% White S,TQuadra Crown Coffer
* Type
ApplicationsEducation•Healthcare•Hotels•Leisure•
Features and BenefitsElegant open coffer with bold stepped relief can be combined with optional acoustical panel for sound absorption
•
Unique combination edge detail means panels can be installed on DX24 or DX15 grids, ideal for renovation projects
•
USG Hydrocal FGR 95, exclusively formulated alpha plaster for superior definition of ornate detail, high strength and durability
•
Non combustible, non toxic composition. USA coast guard certified for marine applications per 164.009/329/0
•
High humidity resistant, suitable for applications with intermittent heating and cooling. May be installed early in the building program
•
100% access to plenum services•
Office•Retail•
CompositionTile is a moulded blend of glass fibre reinforced gypsum prefinished with top coat paint. Material safety data sheet available on request.
Fire reactionBS 476 Pt 6/7 Class 1/0
Humidity ResistanceMaximum 95% RH / 32°C
Weight10 kg/m²
MaintenanceEasily cleaned using soft brush, vacuum or damp sponge.
GB/QUAD-00 21-03-200791741
Indoor Environmental Quality
IndoorEnvironmentalQuality(IEQ) refers to all
environmental factors that affect the health and
wellbeing of building occupants. IEQ focuses largely on
indoor air quality, with comfort, humidity, air exchange,
acoustics, and lighting quality being contributory factors.
To help building professionals create healthy,
pleasant spaces, USG offers: Ceilingwithlittleornoformaldehyde
USG offers the widest selection of standard ceilings
that satisfy stringent guidelines related to VOC (Volatile
Organic Compounds) and formaldehyde emissions.
Most USG panels outperform levels set by OSHA,
Greenguard, and the State of Washington.
Many mineral-fibre and gypsum-panel ceilings
outperform standards established by the Collaborative
for High-Performance Schools (CHPS).
USG's cast-mineral-fibre panels meet or exceed the
extremely stringent standard of the California Office
of Environmental Health Hazard Assessment, which
classifies them as formaldehyde-free.
AntimicrobialtreatmentstocountermouldThe presence of mould, mildew and other microbes,
which can cause problems ranging from allergic
reactions to illness, is a symptom of a larger
construction or maintenance problem allowing
unwanted moisture to develop. A sound mould strategy
begins with good building design, careful detailing and
proper maintenance.
As a backup, architects and specifiers may choose
materials offering enhanced mould resistance for
a degree of short-term protection in the event of a
system failure. To meet this need, USG offers mineral-
fibre ceiling panels with two levels of antimicrobial
protection:
CLIMAPLUSTM Superior Performance. A patented
antimicrobial treatment for broad-spectrum control of
fungi, mould, mildew, bacteria, yeast and algae. These
ceilings deliver performance scores of 8 to 10 when
tested per ASTM D3273 and are the only standard
ceiling panels on the market with a limited lifetime (30-
year) warranty against mould and mildew growth.
CLIMAPLUSTM AntiMicrobial Treatment. Face and back
coatings and/or formulations that inhibit or retard
growth of mould, mildew and odor/stain-causing
bacteria on treated panel surfaces.
With good design and careful material selection,
building professionals can create structures that
function as beautifully as they look.
IndoorAirQualityWhy should we care about indoor air quality (IAQ)?
Because it is estimated that most people spend as
much as 90% of their day indoors. According to studies
by many worldwide Environmental Protection Agencies,
the air within homes, schools and office buildings may
be even more polluted than the outdoor air. Inadequate
ventilation, humidity levels and indoor pollutants are all
contributors to indoor air quality problems.
Because children spend hours each day at school and
are more susceptible than adults to pollutants, they are
particularly at risk.
Studies from the UK (University of Southampton)
suggest that more than 50% of time taken off school by
pupils through chronic conditions is related to allergy
and respiratory problems, and the buildings themselves
that children play and learn in could be contributing to
the problem.
Mould
Mould spores are everywhere, and they can grow on
virtually any surface when moisture is present. Moulds
reproduce by means of tiny spores that are invisible
to the naked eye. When mould spores land on wet
surfaces, they may begin to grow indoors.
Sources of moisture within buildings can include wet
building materials, leaks in the building envelope or
plumbing system, and HVAC condensation or flooding.
Many of these problems, however, can occur during
construction, when materials are installed incorrectly or
without regard to moisture considerations. All building
materials, both organic and inorganic in composition,
can become breeding grounds for mould.
AsthmaThe Finnish Institute of Occupational Health in 2002
carried out studies which provided new evidence of the
relation between workplace exposure to indoor moulds
and development of asthma in adulthood.
The findings suggest that indoor mould problems
constitute an important occupational health hazard.
The Finnish workplace mould study estimated that
the percentage of adult-onset asthma attributable to
workplace mould exposure to be 35.1%.
AcousticqualityOften overlooked but equally important as a factor in
IEQ is the acoustic design of buildings and workspaces.
Good acoustic design results in a balanced environment
that allows the occupants of a workspace to hear
clearly without distraction.
LightreflectanceA well lit (but not overly so) working environment is
beneficial to the occupants making it comfortable on
the eyes when close up work is carried out. Clearly if
the environment is poorly lit, eye strain and headaches
can result. Conversely, if the environment is too highly,
lit the occupants may spend much of the day squinting
resulting again in headaches and discomfort.
Because lighting constitutes so much of the operational
energy in an office building, it is important to consider
the light reflectance of a ceiling panel as an investment
in reducing energy costs and improving sustainability.
LR value represents the percentage of light reflected
from the surface of a material. The industry average for
panels is LF .70 to .80, and values above LR .85 are
considered high. USG offers a number of panels with LR
values at these levels.
SickBuildingSyndrome(SBS)The term "sick building syndrome" (SBS) is used
to describe situations in which building occupants
experience acute health and comfort effects that appear
to be linked to time spent in a building, but no specific
illness or cause can be identified. The complaints
may be localized in a particular room or zone, or may
be widespread throughout the building. In contrast,
the term "building related illness" (BRI) is used when
symptoms of diagnosable illness are identified and can
be attributed directly to airborne building contaminants.
A 1984 World Health Organization (WHO) Committee
report suggested that up to 30 percent of new and
remodelled buildings worldwide may be the subject of
excessive complaints related to indoor air quality (IAQ).
Often this condition is temporary, but some buildings
have long-term problems. Frequently, problems result
when a building is operated or maintained in a manner
that is inconsistent with its original design or prescribed
operating procedures. Sometimes indoor air problems
are a result of poor building design or occupant
activities.
BuildingforthelongtermWhile every corporation wants to take the lead in the
marketplace, not all corporations care about how they
do it. USG has a long history of innovation, not just in
product development but also in manufacturing safe,
healthy products. As a building materials manufacturer,
we want to make the best products and systems but we
don't want to do it at the expense of building occupants.
Occupant health and productivity are coming to the
forefront as issues that architects, designers and
building owners need to take into consideration in the
design process. The problems are not solved purely by
selecting the correct materials, there is a much wider
consideration in the design of modern buildings to meet
the highest standards.
To support that need however, USG strives to
manufacture ceiling products that outperform the
highest product standards. Look for the IEQ logo to
determine which USG ceiling tiles offer particular
performance characteristics in achieving the best
possible design for Indoor Environmental Quality.
42
BS EN 13964:2004European Standard for suspended ceilingsBS EN 13964:2004 Suspended Ceiling: is the harmonised European standard applicable from 1st January 2005, which provides information for the parties responsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications. It covers suspended ceilings sold as kits, individual components & membrane components and describes test methods & methods of assessment as well as provisions for the evaluation of conformity of the products to the requirements of this standard. It should be noted that the standard does not cover the following types of suspended ceiling:• ceilings in mobile buildings • caravans and other forms of transportation,• ceilings with heating or cooling properties,• ceilings subject to water penetration
requirements,• ceilings used externally where requirements
other than covered by this scope would apply (tunnels, canopies, petrol stations, arcades, open sports facilities, car parks, etc.),
• heavy duty suspended ceilings or their supporting construction,
• ceilings formed in-situ with no prefabricated membrane (e.g. plastered ceilings).
The standard will in the main cover the following essential characteristics for most interior suspended ceilings. Those highlighted are directly relevant to the products in this publication:
• reaction to fire• fire resistance (kits only) • release of asbestos• release of formaldehyde • shatter properties (brittle materials only) • flexural tensile strength• load bearing capacity (grids) • electrical safety• sound insulation (kits only) • sound absorption• thermal conductivity• condensation
Many of these performance characteristics have in the past been assumed or even deemed unnecessary, however under the banner of EN13964, manufacturers have to prove or justify the performance of the products. As a result we will have to become familiar with some new terminology in making reference to product performances. We will cover some of the main ones in the following section.
PerformancesandterminologyWe have become very familiar with the existing terminology used to clarify test performance of ceiling products. Typical examples such as Class 1/0 to describe fire reaction performance, 90%RH @ 40°C for humidity resistance and αW 0.7 for sound absorption are in common use within our industry. The advent of EN 13964 means that some of these familiar expressions will disappear and a number of new ones will be introduced.
Some of these such as sound absorption and thermal conductivity remain the same. We will highlight the new requirements below with explanations as to what they mean.
ReactiontofirePossibly the most complex change. The existing test procedure in the U.K. to determine fire reaction performances of ceiling linings is to test in accordance with British Standard BS 476: pt 7 and BS 476: pt 6. Under the requirements of BS EN 13964 we must now test in accordance with the requirements of EN 13501-1: 2002. Without overcomplicating this here with excessive detail, EN 13501-1 dictates which specific test options are available to achieve performance levels. For fire reaction of ceiling linings this is now to be expressed involving 3 distinct factors; Combustibility (Flame spread and propagation) expressed from A2 (best) to F; Smoke production expressed from s1 (best) to s3; and Burning Droplets expressed from d0 (best) to d2. Where currently we are used to referring to Class 0, Class 1 etc, we must become familiar with the expressions A2-s1, d0 or B-s2, d3 for example. In simple terms, A2 means the membrane component is of limited combustibility; s1 means that smoke production is light and d0 means that no burning droplets were released from the specimen. There is also a category A1, which basically means non combustible, similar to the current BS 476: pt 4, which does not require reference to smoke production or burning droplets.
The latest edition of Building Regulations Approved Document B (2006 Edition, Volumes 1 & 2) now includes these new performance requirements and illustrates a general comparison of performance requirements between current and new standards. Please refer to Building Regulations Approved Document B: Volume 1 - Section 3, Table 1; and Volume 2 - Section 6, Table 10.
ReleaseofformaldehydeWhere Formaldehyde containing material is part of the formulation of a ceiling component this component must be tested to determine the level of formaldehyde likely to be released. This is to be tested and classified in accordance with ENV 717-1 & 717-2, and classified E1 or E2. An E1 classification means that formaldehyde release is either nil or negligible.
ReleaseofasbestosNo part of a ceiling shall contain asbestos.
SoundabsorptionNo change. The absorption performance of USG Acoustical Ceiling products will be stated as before on the product page.
ThermalconductivityNo change. The Thermal Resistance (R-value) of USG Acoustical Ceiling products will be stated as before on the product page.
FlexuraltensilestrengthThis new requirement effectively illustrates the ability of a membrane component to support its own mass when installed in the substructure (grid), under specific environmental conditions. It is intended to determine the aesthetic appearance of the membrane component in installation. This must be determined by testing in accordance with the procedures specified in EN 13964. The result of the test shall be declared as a classification of deflection (expressed from Class 1 [best] to Class 3) in combination with a classification of exposure (expressed as A [lowest] to D) and the applied load. The results are expressed as, for example, Class 1/B/No load, where Class 1 means the deflection of the membrane component is no more than 1.2mm (based upon a 600mm edge); B indicates an environment of up to 90% RH @ 30°C; and No Load means no additional load was applied to the component in test.
CertificatesofconformityIn respect of membrane components (ceiling tiles), USG engaged the services of Warrington Certification Ltd (EC Reference Number: 1121) to test, collate and present the test documentation, and produce a Certificate of Conformity to provide independent proof of the component compliance with the standard. Copies of these certificates are available from USG upon request.
CEMarkingofsuspendedceilingsCompliance with all the relevant requirements of BS EN 13964 allows a manufacturer to apply a CE mark symbol to his products. This will show that the product is approved and certified with the requirements of the applicable European Directive and is therefore legally able to be sold and marketed in those countries participating in the European Economic Area (EEA) agreement. The Construction Products Directive (CPD) relevant to Suspended Ceilings is Council Directive 89/106/CE. This identifies the requirements for suspended ceiling products upon which the new standard BS EN 13964 has been based.
PeriodofcoexistenceBS EN 13964 was introduced and applicable from 1st January 2005. Originally a 12 month period of coexistence with existing local standards meant that BS EN 13964 was to become mandatory on 1st January 2006. It should be noted that EN 13964 is currently being discussed at European level with a view to making amendments to the standard. This will result in a revised standard and a guidance document being published at some point in the future. With this in mind, the European Commission Standing Committee on Construction has agreed to extend the coexistence period of EN 13964. At the time of publication, the date for the end of the coexistence period is 1st July 2007, at which point any Suspended Ceiling product placed into the European Economic area must be CE marked in accordance with EN 13964 Suspended Ceilings.
43
System performanceUSG ceiling systems should be installed in accordance with recommendations described within this catalogue and the DONN grid application guide. System performance following any substitution of materials or compromises in assembly cannot be guaranteed and may result in failure under critical conditions. Reference should be made to BS 8290 1991 Suspended Ceilings parts 1, 2 and 3, and the European Standard for Suspended Ceilings BS EN 13964:2004. COSHH data sheets are available on request.
Site storage and handlingStorage on site should be as short as possible with environmental conditions as near as possible to those specified for occupancy (see below). Any storage area should be secure and fully protected from the weather with cartons stored on a clean, dry base. Cartons of material should never be rolled, dropped or slid, and under no circumstances used as a workbase or substitute for ladders, scaffolding, etc.
Pattern directionWith directional face patterns, such as Glastone, Sandrift and Frost, the orientation of pattern relative to light sources should be carefully considered for desired visual effect, and specified and installed accordingly. Variations in colour and fissure size in Glastone, Sandrift and Frost ceiling tiles will be of little consequence within a single production batch. However, minor variations can occur from time to time, and projects should be planned so that all material for continuous ceiling space is ordered and delivered from the same production batch. USG tiles are marked with a directional arrow on the back and should always be installed with this in alignment to ensure total consistency of pattern and paint shade in a production batch.
Overlaid materialWherever possible overlaid material, such as insulation, should not be laid directly on the back
of the ceiling membrane, as this will compromise the fire resistant properties of the ceilings. In normal conditions (BS 8290), overlaid material should not exceed 3.6kg/m2 weight. For high humidity environments, overlaid installation shall be limited to 1.2 kg/m2.
Installation/environmental conditionsFor applications with normal controlled environmental conditions, products with 70% RH/29°C or better are suitable.
Installation should only take place under ambient conditions after residual moisture from concrete and plaster has dissipated.
The recommended relative humidity should not exceed 70% RH within a temperature range 65-85°F, 18-29°C for installation and occupancy.
Once ceiling installation has commenced, it is essential that RH% and temperature be maintained at acceptable levels by heating the building if necessary. Dry heating should be employed and paraffin or gas heaters avoided. These recommendations should still be applied between completion of contract and the occupation of the building. Unoccupied buildings with uncontrolled atmospheres may have a wide temperature range during a 24 hour period which could lead to an unacceptable change in dimension stability of the ceiling panels, causing excessive sag.
For applications with intermittent heating and cooling systems, products with 90%RH/32°C or better are recommended. (See Technical Performance Selector, pages 4-5.)
For applications with uncontrolled environmental conditions, natural ventilation systems or in humid areas such as washrooms, kitchens or wet process areas, products with 95-99%RH/40°C or better are recommended. (See Technical Performance Selector, page 4-5.)
Ceramic Radar ceiling panels perform especially well in areas such as swimming pools, where the ceiling may be subject to unusually high levels of humidity up to 100% RH and chemical attack. They should be installed with USG DONN Corrosion Protected ceiling grid and appropriate hangers to resist corrosion.
All USG tiles should be protected from sustained direct contact with water.
Maintenance and cleaningGeneral cleaning of dust and loose dirt may be easily achieved using a soft brush or vacuum cleaner. Soiled panels can be cleaned with an art gum eraser or dampened cloth or sponge containing as little water as possible.
Clean Room tiles can be wet wiped on a regular basis without damage.
Panels should never be soaked or immersed in water.
Cleaning can also be carried out by specialist contractors using proprietary methods and chemicals. It is strongly recommended that a trial area be cleaned to ensure that there is no detrimental effect on the ceiling panel or grid.
Re-decorationIt should be noted that a new paint finish may compromise the Surface Spread of Flame classification and acoustic absorption for that panel.
Please consult the USG Technical Services Department for expert advice and recommendations.
Installation and maintenance
In addition to a wide standard range, USG can satisfy specifiers’ needs for non-standard, specialised ceilings. Please talk to your local USG representative to arrange production of your specific ideas.
Custom products
www.usg.com/europe
United Kingdom, IrelandUSG (UK) Ltd.1 Swan RoadSouth West Industrial EstatePeterleeCo. Durham SR8 2HSUnited KingdomTel: +44 (0)191 586 1121Fax: +44 (0)191 586 0097e-mail: [email protected]
Deutschland, Österreich, SchweizUSG Deutschland GmbHMetallstrasse 1D-41751 ViersenDeutschlandTel: +49 (0)2162 9570Fax: +49 (0)2162 4461e-mail: [email protected]
España, Portugal, MarruecosUSG Interiors España S.L.C/José Lázaro Galdiano, 428 036 MadridEspañaTel: +34 (91) 457 00 50Fax: +34 (91) 457 10 16e-mail: [email protected]
France, Belgique, LuxembourgUSG France S.A.Z.I. Nord - BP 2879 Rue des Livraindières28109 Dreux CedexFranceTel: +33 2 37 38 50 50Fax: +33 2 37 42 10 73e-mail: [email protected]
ItaliaUSG Italia SRLVia Avv. Ambrosoli, 10/A20090 Rodano-loc. Millepini (MI)ItaliaTel: +39 02 95 32 85 87Fax: +39 02 95 32 86 37e-mail: [email protected]
Russia, Ukraine, Byelorussia, Kazakhstan & CIS countries USG Building Systems RUSul. Salova 45 F192 102 St. PetersburgRussiaTel: +7 812 347 79 26Fax: +7 812 347 79 27e-mail: [email protected]
Sverige, Norge, Danmark, Finland, IslandUSG ScandinaviaAnkdammsgatan 28S-171 43 SolnaSwedenTel: +46 (0)8 444 38 30Fax: +46 (0)8 626 94 51e-mail: [email protected]
Middle EastUSG Middle East Ltd.PO Box 2897Dammam 31461Saudi ArabiaTel: +966 3 812 0995/1075Fax: +966 3 812 1029
USG International Inc550 West Adams StreetChicago, Illinois 60661-3676USATel: +1 312 436 4000Fax: +1 312 672 7726
USG reserves the right to change specifications or design and supply products which may differ from those described and illustrated without notice and without liability. All weights and measures are nominal.
DONN® is a trademark of USG Interiors Inc. or affiliated companies.
DC/03/UK/04/07
© 2007
u