additional accessories: fuze - summer infant · pdf file21290, 21300 stroller instruction...
TRANSCRIPT
21290, 21300
STROLLERINSTRUCTION MANUAL
strollerfuzeTM
Please read the following instructions andwarnings carefully before use of product. Keep this instruction manual for future reference.
No tools required.For Technical Support Call Consumer Relations 1-800-268-6237
Keep small parts and packaging away from children.
WARNING:Adult assembly required. Exercise care when unpacking and assembling product.
• NEVER leave child unattended. ALWAYS keep child in view while in the stroller.• Avoid serious injury from falling or sliding out. ALWAYS use safety harness.• Stroller maximum weight limit 50 lbs. (22.73 kg).• When making adjustments to the product ALWAYS ENSURE that all parts of a child’s body are clear of any moving parts of the product.• Care must be taken when folding and unfolding the product to prevent finger entrapment.• DO NOT carry additional children, goods or accessories in or on this product except as recommended in this instruction manual.• TO AVOID INJURY TO YOUR CHILD, DO NOT USE STORAGE BASKET AS A CHILD CARRIER.• DO NOT hang items on handle bar or place them on the canopy, as they can tip stroller over and injure child.• DO NOT OVERLOAD STORAGE BASKET. MAXIMUM 10 lbs. (4.5 kg). • DO NOT overload the storage pocket and cupholder. MAXIMUM 2 lbs. (0.9 kg). Excessive weight may cause the stroller to become unstable or tip over.• Do not place hot liquids in the cup holder. Spills can burn your child.• Do not carry or roll stroller on stairs or escalators with child in it.• Do not use the strollers if any part is lost or damaged.Use ONLY with the Summer Infant Prodigy®, Chicco® Keyfit®, Graco® Snugride®, Peg Perego® Viaggio® Infant Car Seats. Other car seats or carriers are not designed to fit the stroller frame and may result in serious injury or death. NEVER use them as they have not been safety tested.• NEVER use the above infant car seats in stroller without car seat adapter properly installed.• ALWAYS check to confirm the car seat adapter is securely locked to the stroller before use.• ALWAYS check to confirm the car seat is securely locked into the car seat adapter before use.
WARNING: Read and follow all warnings and instructions.Failure to do so could result in serious injury or death.
• Clean minor stains on fabric with cold water and mild soap. Air dry.
• Clean plastic and metal surfaces with a soft damp cloth. Air dry. Do not use abrasive cleaners or solvents. Do not use bleach.
• Check seat pad harness and crotch straps weekly to ensure they are properly secured to frame.
©2012 Summer Infant, Inc.Colors and styles may vary.Please retain for future reference.
Summer Infant stands behind all of its products. If you are notcompletely satisfied or have any questions, please contactour Consumer Relations Team at 1-800-268-6237 or
www.summerinfant.com/contact(For Europe call (0) 144 250 5000 or
connect with us:
www.summerinfant.com
We LOVE our consumers!Get to know us at:
Summer Infant, Inc.1275 Park East DriveWoonsocket, RI 02895 USA1-800-268-6237
care and maintenance:
Additional accessories available online.For more information visit www.summerinfant.com
click!snap!
snap basket onto frame
snaps!x 3
x 4snaps!
reattaching the storage basket:
Summer Infant Canada11055 Middlegate Road, Unit 2Mississauga, Ontario L4Y 3Y4MADE IN CHINA.
01/13
additional accessories:Additional accessories available at www.summerinfant.com
Foot muff21420
Rain shield21400
Bug net21410
Bassinet26140
10 7
reversing the toddler seat:
reverse seat2
1
align seat with frameand push down
3
press!press!
lift!
click!click!
releasing wheels:
front wheels rear wheels
press!press! press!press!
pull!pull!pull!pull!
press side buttons at thesame time while lifting to release seat
NOTE: before use, ensure that allstroller connections are secure.!
folding stroller:
push small button in with thumband pull back on both releaselevers at same time
1
push!push!
2 push down to fold
press!press!
components:
assembly instructions:
2
car seat adapter installation for use with Graco® Snugride®:
IMPORTANT! Before assembly, inspect this product for damaged hardware,loose joints or missing parts. Never use if any parts are missing or broken.!
stroller seat
2 rear wheels
stroller frame with basket canopy
bumper bar
press down on brakepedal to engage brake
• Infant car seat adapter must be securely locked to stroller before infant car seat is placed on stroller.• NEVER install car seat carrier without car seat adapter• CHECK to confirm that car seat adapter and car seat carrier are securely locked to the stroller • NEVER lift stroller by infant carrier handle• Read all warnings on front page of this instruction booklet and on product
WARNING:PREVENT SERIOUS INJURY OR DEATH FROM FALLS
click! arrow facesforward
align car seat adapter with arrowpointing forward and push down ontoframe
align car seat andset it into adapter
stroller common parts:
21290 stroller:
21300 stroller:
front wheels 28710-05rear wheels 28710-06cup holder 28710-08bumper bar 28710-07car seat adaptor 28710-04adapter strap 21290-03
storage basket 28710-09canopy 21290-01
storage basket 21300-02canopy 21300-01
click! click!
click!
2
1 push on rear wheels, both sides
push on front wheels
IMPORTANT! Tug on each wheel toensure they are securely attached! IMPORTANT! REAR FACING ONLY!
Do NOT install forward facing. !
Remove and dispose of packing material properly!
1 2
3
15
to release, undo strapand lift up by handle
5attaching carstrap adapter
4
car seat adapter
2 front wheels cup holder
adapterstrap
IMPORTANT! Pull up on car seat to confirm thatit is secured properly!
Graco® Snugride® - Adapter Strap Required (ref. p.11)
feedthrough bothbelt paths!
snap buckleand pulltight!
FRONT
314
Chicco® Keyfit® - Adapter Strap Required (ref. p.11)
car seat adapter installation for use with Chicco® Keyfit®:
press down on brakepedal to engage brake
• Infant car seat adapter must be securely locked to stroller before infant car seat is placed on stroller.• NEVER install car seat carrier without car seat adapter• CHECK to confirm that car seat adapter and car seat carrier are securely locked to the stroller • NEVER lift stroller by infant carrier handle• Read all warnings on front page of this instruction booklet and on product
WARNING:PREVENT SERIOUS INJURY OR DEATH FROM FALLS
click!
align car seat andset it into adapter
Push down on handle to ensure thatstroller is fully open and locked in position!
lift handle up to unfold4
3 push to release locking clip
click!click!
1 2
3 5attaching carstrap adapter
4
align car seat adapter with arrowpointing forward and push down ontoframe
arrow facesforward
IMPORTANT! REAR FACING ONLY! Do NOT install forward facing. !
to release, undo strapand lift up by handle
IMPORTANT! Pull up on car seat to confirm thatit is secured properly!
feedthrough bothbelt paths!
snap buckleand pulltight!
FRONT
134
Peg Perego® Viaggio® - Adapter Strap Required (ref. p.11)
car seat adapter installation for use with Peg Perego® Viaggio®:
press down on brakepedal to engage brake
• Infant car seat adapter must be securely locked to stroller before infant car seat is placed on stroller.• NEVER install car seat carrier without car seat adapter• CHECK to confirm that car seat adapter and car seat carrier are securely locked to the stroller • NEVER lift stroller by infant carrier handle• Read all warnings on front page of this instruction booklet and on product
WARNING:PREVENT SERIOUS INJURY OR DEATH FROM FALLS
click!
align car seat andset it into adapter
finished!
align seat with frame push down87
click!click!
clip canopy onto seat frame install bumper barand cupholder
109
click!click!click!click!
click!click!
NOTE: before use, ensure that allstroller connections are secure.!
1 2
3 attaching carstrap adapter
4
align car seat adapter with arrowpointing forward and push down ontoframe
arrow facesforward
IMPORTANT! REAR FACING ONLY! Do NOT install forward facing. !
to release, undo strapand lift up by handle
5
IMPORTANT! Pull up on car seat to confirm thatit is secured properly!
feedthrough bothbelt paths!
snap buckleand pulltight!
FRONT
12 5
stroller components: removing infant car seat from stroller:
pull!pull!
1 Prodigy®:pull release handle on the back of car seat
Chicco Keyfit®, Peg Perego Viaggio®,Graco Snugride®:unbuckle adapter strap andmove straps aside
2 lift car seat upby carry handle
pull!Press release buttons inand pull up on car seatadaptor to remove
3
canopy
bumper bar
5-point safety harness
stroller seat
front wheel release button
cup holder
storage basket
rear wheel release button
sweet peek window
soft foam handle
handle height adjust
front wheel lock
front wheels
folding buttons/release levers
pedicure-friendly rear brake
seat recline button
seat release button
locking clip
storage pocket
bumper bar release button
cup holder clip (both sides)
rear wheels
6 11
reclining the seat:
position 3
press!
press both recline buttons at the same time and rotate to adjust seat angle. Theseat will click into one of three positions.
1position
press!
press!
position 2
press!press!
using the bumper bar:
press!press!
press release button, pull upand swing bumper bar to side
1 NOTE: the bumper bar can beremoved by detaching both sides.
• Infant car seat adapter must be securely locked to stroller before infant car seat is placed on stroller.• NEVER use infant car seat in stroller without car seat adapter.• CHECK to confirm that car seat adapter and car seat carrier are securely locked to the stroller. • NEVER lift stroller by infant car seat handle.• Read all warnings on front page of this instruction booklet and on product.
WARNING:PREVENT SERIOUS INJURYOR DEATH FROM FALLS
car seat adapter installation for use with Prodigy®:
Adapter Straps are not necessaryfor installing the Prodigy.!
Pull up on the car seat to makesure it is properly lockedinto place. IMPORTANT!REAR FACING ONLY! Do NOT install forward facing.
!
click!
press down on brakepedal to engage brakeand remove strollerseat
click!
21 3 install car seat rearfacing, push down tolock into position
align car seat adapterwith arrow facing forward,push down onto frame
car seat adapter installation instructionsfor use with the Prodigy®, Chicco® Keyfit®, Graco® Snugride®, Peg Perego® Viaggio® infant car seats.
installing car seat adapter strap:
wrap small straparound bar and feed into clip
1 2 wrap large straparound bar and feed into clip
NOTE: Adapter strapsmust be used whenfitting the followingcar seats into thestroller:* Chicco Keyfit®
* Peg Perego Viaggio®
* Graco Snugride®
It is not required forProdigy® Car Seat.
!
FRONT
Assemble straps to frame between peg and knuckle.!
8 9
adjusting the handle height: using the sweet peek window:
press!
press both buttons and adjusthandle to desired height
press!
locking/unlocking the child safety harness:
1stopen!
close!close!
rd3
click!click! click!click!nd2
rear wheels - brake front wheels
NOTE: locking the front wheelsdisables the swivel action!
locking the wheels: adjusting shoulder harness positions:
3
2
1lower position!1 middle position!2
upper position!3
adjust the harness height to the position that it closest to thechilds shoulder height, use the slide adjusters for further adjustments
NOTE: feed strap entirely through seat padslots when adjusting harness height!
slide adjustment4
lift and flip forward to open
Please read the following instructions andwarnings carefully before use of product. Keep this instruction manual for future reference.
Prodigy™ infant car seat User Guide included andattached to car seat.
Car seat control panel required 3AA batteries (included).
No tools required.For Technical Support Call Consumer Relations 1-800-268-6237
Keep small parts and packaging away from children.
WARNING:Adult assembly required. Exercise care when unpacking and assembling product.
• NEVER leave child unattended. ALWAYS keep child in view while in the stroller.• Avoid serious injury from falling or sliding out. ALWAYS use safety harness.• Stroller maximum weight limit 50 lbs. (22.73 kg).• When making adjustments to the product ALWAYS ENSURE that all parts of a child’s body are clear of any moving parts of the product.• Care must be taken when folding and unfolding the product to prevent finger entrapment.• DO NOT carry additional children, goods or accessories in or on this product except as recommended in this instruction manual.• TO AVOID INJURY TO YOUR CHILD, DO NOT USE STORAGE BASKET AS A CHILD CARRIER.• DO NOT hang items on handle bar or place them on the canopy, as they can tip stroller over and injure child.• DO NOT OVERLOAD STORAGE BASKET. MAXIMUM 10 lbs. (4.5 kg). • DO NOT overload the storage pocket and cup holder. MAXIMUM 2 lbs. (0.9 kg). Excessive weight may cause the stroller to become unstable or tip over.• Do not place hot liquids in the cup holder. Spills can burn your child.• Do not carry or roll stroller on stairs or escalators with child in it.• Do not use the strollers if any part is lost or damaged.Use ONLY with the Summer Infant Prodigy® Infant Car Seat. Other car seats or carriers are not designed to fit the stroller frame and may result in serious injury or death. NEVER use them as they have not been safety tested.• NEVER use Prodigy® infant car seat in stroller without car seat adapter• ALWAYS check to confirm the car seat adapter is securely locked to the stroller before use• ALWAYS check to confirm the Prodigy®car seat is securely locked into the car seat adapter before use • See instructions for additional warnings. If you do not have a User Guide, visit www.summerinfant.com or call Summer Infant Customer Service Dept. at 1-800-268-6237 to receive one.
WARNING:
28710
• Clean minor stains on fabric with cold water and mild soap. Air dry.
• Clean plastic and metal surfaces with a soft damp cloth. Air dry. Do not use abrasive cleaners or solvents. Do not use bleach.
• Check seat pad harness and crotch straps weekly to ensure they are properly secured to frame.
Read and follow all warnings and instructions.Failure to do so could result in serious injury or death.
with prodigy infant car seat®
travel system fuzeTM
TRAVEL SYSTEMINSTRUCTION MANUAL
©2012 Summer Infant, Inc.Colors and styles may vary.Please retain for future reference.
Summer Infant stands behind all of its products. If you are notcompletely satisfied or have any questions, please contactour Consumer Relations Team at 1-800-268-6237 or
www.summerinfant.com/contact(For Europe call (0) 144 250 5000 or
connect with us:
www.summerinfant.com
We LOVE our consumers!Get to know us at:
Summer Infant, Inc.1275 Park East DriveWoonsocket, RI 02895 USA1-800-268-6237
care and maintenance:
removing infant car seat from stroller:
pull!pull!
1 2pull release handle onthe back of car seat
lift car seat upby carry handle
Additional accessories available online.For more information visit www.summerinfant.com
click!snap!
snap basket onto frame
snaps!x 3
x 4snaps!
reattaching the storage basket:
pull!
Press release buttonsand pull up on car seatadaptor to remove
3
radio and television interference: (FCC Statement)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by Summer Infant Inc. for compliance could void the user’s authority to operate the equipment.
Summer Infant Canada11055 Middlegate Road, Unit 2Mississauga, Ontario L4Y 3Y4MADE IN CHINA.
01/13
10 3
Push down on handle to ensure thatstroller is fully open and locked in position!
lift handle up to unfold4
3 push to release locking clip
folding stroller
push small button in with thumband pull back on both releaselevers at same time
1
additional accessories:
click!click!
push!push!
2 push down to fold
Additional accessories available at www.summerinfant.com
Foot muff21420
Rain shield21400
Bug net21410
Bassinet26140
press!press!
11
stroller components:
assembly instructions:
2
IMPORTANT! Before assembly, inspect components for damaged hardware,loose joints or missing parts. Never use if any parts are missing or broken.!
stroller seat
2 rear wheels
2 front wheels
front wheels 28710-05rear wheels 28710-06cup holder 28710-08Prodigy carseat adaptor 28710-04bumper bar 28710-07storage basket 28710-09canopy 28710-03
stroller parts:
click!
stroller frame with basket canopy
cup holder
bumper bar
click!
click!
2
only use the prodigy® infant car seat with this stroller
• Infant car seat adapter must be securely locked to stroller before infant car seat is placed on stroller.• NEVER use infant car seat in stroller without car seat adapter.• CHECK to confirm that car seat adapter and car seat carrier are securely locked to the stroller. • NEVER lift stroller by infant car seat handle.• Read all warnings on front page of this instruction booklet and on product.
WARNING:PREVENT SERIOUS INJURYOR DEATH FROM FALLS
attaching car seat adapter and infant car seat :
Pull up on the car seat adapterto make sure it is securely locked.!
Pull up on the car seat to makesure it is properly locked into place.!
click!click!
1 push on rear wheels, both sides
push on front wheels
press down on brake pedal toengage brake and removestroller seat
click!
align car seat adapter with arrow facingforward. Push down to lock onto frame
®
prodigy car seat adapter®
IMPORTANT! Tug on each wheel toensure they are securely attached!
Remove and dispose of packing material properly!
21
3 install car seat rear facing,push down to lock into position
4 9
releasing wheels:
front wheels rear wheels
finished!
align seat with frame push down65
click!click!
attach canopy to frame andclip both sides to secure
install bumper barand cupholder
87
click!click!
click!click!
click!click!
press!press! press!press!
adjusting shoulder harness positions:
3
2
1
NOTE: before use, ensure that allstroller connections are secure.!
pull!pull!pull!pull!
lower position!1 middle position!2
upper position!3
adjust the harness height to the position that it closest to thechilds shoulder height, use the slide adjusters for further adjustments
NOTE: feed strap entirely through seat padslots when adjusting harnes height!
slide adjustment4
8 5
locking the wheels:
canopy
bumper bar
5-point safety harness
stroller seat
front wheel release button
cup holder
storage basket
rear wheel release button
sweet peek window
soft foam handle
handle height adjust
front wheel lock
front wheels
folding buttons/release levers
pedicure-friendly rear brake
stroller components:
rear wheels - brake front wheels
locking/unlocking the child safety harness:
seat recline button
seat release button
locking clip
storage pocket
holds prodigy® infant car seat (see page 11)
1stopen!
close!close!
rd3
click!click! click!click!nd2
bumper bar release button
cup holder clip (both sides)
rear wheels
NOTE: locking the front wheelsdisables the swivel action!
position 3
press!
6 7
reclining the seat: reversing the seat:
using the bumper bar:
press both recline buttons at the same time and rotate to adjust seat angle. Theseat will click into one of three positions.
press side buttons at thesame time while lifting to release seat
reverse seat21
align seat with frameand push down
3
adjusting the handle height:
press!
press both buttons and adjusthandle to desired height
1position
press!
press!
position 2
press!press!
lift!
click!
press!press!
press!press!
click!
NOTE: before use, ensure that allstroller connections are secure.!
press release button, pull upand swing bumper bar to side
1 NOTE: the bumper bar can beremoved by detaching both sides.
press!