adhesives - nover · pdf filenover product catalogue 11.3 adhesives av180 mdf board &...

NOVER PRODUCT CATALOGUE 11.1

Adhesives

PVA 11.2Titebond PVA 11.4Construction Adhesives 11.6Silicone / Sealants 11.72 Part Resins 11.8Hot Melt Adhesives 11.10Contact Adhesives 11.12Filler 11.14Cleaners & Misc 11.15

NOVER PRODUCT CATALOGUE11.2

ADHESIVESA

dhes

ives

PVA

AV Hybond General Purpose PVAHybond GP is an economical, medium setting, unfilled high viscosity, general purpose PVA. It produces a clear glue line and is suitable for use with most softwood and particleboard.Hybond GP is suitable for pine, particleboard and normal cabinet timbers and may be used in conjunction with mechanical fasteners e.g. nails, screws etc.Apply Hybond GP to one surface only and clamp assembly while the adhesive is still wet. Assembled parts should be left 24 hours to allow for complete curing of the glue line before further processing.Clamps may be removed earlier depending on the temperature conditions and the moisture content/density of the materials being bonded.Keep containers sealed and do not store in direct sunlight. Keep in a cool area of the factory avoiding contact with concrete floors. Hybond GP can be stored for up to 18 months unopened in sealed plastic containers in warehouse conditions.

DESCRIPTION CODE910352 5lt 5200117

910353 20lt 5200118

AV101 High Solids Grade PVA AdhesiveAV101 – is a fast setting high bond strength grade PVA, suitable for solid timber joinery. It is an excellent adhesive for dowel and mortice and tenon joints. It is suitable for general purpose bonding for joinery and assembly work where good bond strength and short clamp times are desirable.Uses:• Joineryandassemblybonding• Dowel,morticeandtenonjoints• EndgrainandbuttjointsFeatures and Benefits:• Nontoxic• Nonflammable• Cleanupwithwater• Fastset


910054 20lt 5200116

AV56 Melamine Laminating Board AdhesiveAV56 is an emulsion based adhesive for the bonding of synthetic laminated board to timber, particle board, Craftwood and other semi-porous surfaces. It is an excellent adhesive for a variety of laminates including DAP, Melamine and vinyl coated board. AV56 Clear is an unfilled version for applications requiring a clear glue line. Application and usage detail are the same as for AV56. AV56 is widely used in the furniture industry for assembly of laminated board with traditional fittings such as dowels, mortice and tenon, cams, staples, nails and screws. It is a versatile adhesive that will also bond a variety of porous materials such as timber, particle board, MDF board and Craftwood to non-porous substrates such as rigid foam, vinyl sheet and cultured marble.Features and Benefits:• Veryhighbondstrength• Nonflammable• Cleanupwithwater• Singlepack

DESCRIPTION CODEClear 910170 500ml 5200111

Clear 910171 5lt 520011

Clear 910172 20lt 5200110

Cream 910166 5lt 5200112

Cream 910168 20lt 5200113


Adh

esiv

es

AV180 MDFBoard&JoineryAdhesiveAV180 is a unique one pack water based adhesive which has been designed to complement the high quality properties of MDF Board. AV180 has fast ‘wet tack’, is quick drying and has excellent machining and sanding properties. The bonds formed are very strong and heat resistant and the glue line will accept the stains and lacquers recommended for MDF Board.Uses:• AssemblyandjoiningofMDF board for furniture and cabinet making• LaminatingMDFboard for turning and shaping• BondingofPinetimberin furniture manufactureFeatures and Benefits:• Veryhighbondstrength• Nonflammable• Cleanupwithwater• Singlepack


910071 20lt 5200120

AV190 High Strength Wood AdhesiveAV190 is a fast-grab, fast setting, and high strength wood adhesive. Due to a strong “wet tack” it grabs instantly on hard or soft woods, while still permitting alignment of parts. It exhibits good penetration of wood and has easy clean up. The dry film will accept stains, lacquers and varnishes. AV190 is designed for bonding of pine and normal cabinet timbers. It will often bond difficult species not normally successful with standard PVA type adhesives; however a trial should be carried out to confirm suitability. AV190 is particularly suitable for glue lines in joinery work that is to be stained or lacquered.Uses:• Bondingofpine• Bondsdifferenttimberspecies• GluelinestobestainedorlacqueredFeatures and Benefits:• Veryhighbondstrength• Nonflammable• Cleanupwithwater• Singlepack


910077 20lt 5200141

AV XL Plus Crosslinking PVA Single PackAV XL Plus is a medium to fast setting medium solids single pack crosslinking PVA emulsion adhesive which develops excellent bond strength, high heat resistance and humidity resistance, without catalyst addition, when dried at normal or elevated temperatures. It produces a clear non staining glue line. AV XL Plus is an excellent adhesive for cabinet and furniture assembly where high bond strengths, good water/humidity resistance and relatively short clamp times are required. Uses• Edgegluingtimbersections,Solidtimberveneersorplasticlaminatestocoresubstrates• Fingerjointing• Paneltoframegluing• RFcuringapplicationsFeatures and Benefits:• Canbeusedincoldpressingandhotpressingapplications• WaterresistanceexceedsDIN68602-D3• Goodcreepresistance,exceedingtherequirementsforresistancetosustainedloadofBS4071• Waterbasedandnonflammable


912872 20lt 5200105


ADHESIVESA

dhes

ives

TITEBOND PVATitebond Regular PVA AdhesiveTitebond Regular was the first aliphatic resin emulsion adhesive developed, and for over 35 years has set the standard by which all other aliphatics are measured. This premier adhesive has excellent creep- and heat-resistance, superior solvent-resistance, very low minimum use temperature, and excellent bond strength. Titebond Regular is an excellent choice for edge and face gluing as well as general assembly of a wide variety of wood species.

DESCRIPTION CODE20lt 520050

Titebond 50 PVA AdhesiveTitebond 50 is a fast-setting, aliphatic resin emulsion adhesive. This adhesive has excellent creep- and heat-resistance, superior solvent-resistance, very low minimum use temperature, and excellent bond strength. It combines both good heat-resistance and speed of set. Titebond 50 is best used in edge and face gluing as well as general assembly gluing

DESCRIPTION CODE20lt 520075


Adh

esiv

es

Titebond Original• Fastset–shortensclamptime• Bondsstrongerthanwood• Excellentheatandsolvent-resistance• Excellentsandability• Unaffectedbyfinishes• Versatile–bondswood,hardboard,highpressurelaminatesand

particleboard• Easycleanupwithwater• ConformstoASTMD4236

DESCRIPTION CODE3.785lt 520061

Titebond II Premium• Firstone-partwoodgluetopassANSITypeIIwater-resistance• Designedforexterioruse• Excellentsandability• Unaffectedbyfinishes• FDAapprovedforindirectfoodcontact• Idealforradiofrequency(R-F)gluingsystems• Easycleanupwithwater• ConformstoASTMD4236


Titebond III Ultimate• PassesANSI/HPVATypeIwater-resistance• Waterproofformulathatcleansupwithwater• Superiorstrength-stronginitialtack• Designedforinteriorandexteriorapplications• Longeropenassemblytime• Lowerapplicationtemperature• Unaffectedbyfinishes• FDAapprovedforindirectfoodcontact• ConformstoASTMD-4236



ADHESIVESA

dhes

ives

CONSTRUCTION ADHESIVESAV515 PVA AdhesiveAV515 is a single component, solvent-free, thixotropic, quick setting, and moisture cured polyurethane adhesive. Fully cured AV515 has an extremely strong bond with excellent resistance to water, weathering, ageing and marine conditions. Certified to EN204 D4. AV515 is suitable for bonding porous to porous and porous to non porous substrates such as wood, plasterboard, fibrous cement, metal, EPS foam, concrete, brick, melamine, various plastics(testingisrecommended)andmanyothercommonsubstratesprovidingoneortwoofthe surfaces contain moisture. The product will not cure if there is no moisture available from the substrate. E.g. glass to glass or metal to metal is not possible. Its high strength bond is ideal for bonding hardwood species such as Spotted Gum, Black Butt and Brush Box.Features and Benefits:• Veryhighbondstrength.• Singlepack.• Nonflammable.• Solventfree.• FastSet

DESCRIPTION CODE PU300ml 912846 520019 12

Bostik No More NailsHigh strength, wood coloured general-purpose construction adhesive and sealant for interior or exterior construction work Features and Benefits:• Highinitialgrab• Highadhesivestrength• StyreneSafe• Waterresistant• Non-Slump• Excellentgapfillingproperties• Multipurposeapplications• General-purposeconstructionadhesive• AdheringpolystyrenepanelsLimitations:• PlasticisermigrationcanbeapotentialproblemwithsomePVCmaterials• Solventbubblingthroughtheveneermayaffectverythinsectionsofdecorativeplywoodwith

a veneer surface• Highlyflammableandmustbekeptawayfromsparksandnakedflame• Areaswhere“NoMoreNails”isbeingusedmustbewellventilatedtoensuredispersalof

solvent vapour

DESCRIPTION CODE PU320gm 520020 20

Maxbond Construction AdhesiveFuller Maxbond™ construction adhesive is ideal for bonding timber and most common construction materials including particle board, MDF board, brick, concrete, gypsum board, galvanized metal and aluminum. Maxbond is a synthetic rubberbased adhesive designed primarily for installation of flooring and wall panels. Maxbond can be used in many general household applications.Benefits:• Bridgesgapsupto9mm-effectivewhenusedonunevensurfaces• Onepart-nomixing• Paintablewithmostsurfacecoatings• Reducessqueakingassociatedwithnailrideinfloors• ComplieswithAS2329–1999requirements• Repositionableforupto20minutesafterapplication• Reducesnumberofmechanicalfastenersrequiredtoinstallfloorsorwalls• Waterresistant-willnotbreakdowninintermittentcontactwithwater(e.g.rain)• Naturalwoodcolour-blendsin• Highbondstrength



Adh

esiv

es

SILICONE / SEALANTSKitchen & Bathoom SiliconeOne component neutral cure industrial silicone for sealing around showers, baths, sinks, hand basins tiles and areas where resistance to mould and mildew is required. Uses:• Sanitaryapplication• Bathrooms,baths• Sealingcoolroomandconstructionjoints• Showerrecessanddampareas• Maybeusedonconcrete,brickworkandmasonryFeatures and Benefits:• Resistanttomouldandmildewgrowth• Highlyflexible• Waterproof• UVlightresistant

DESCRIPTION WEIGHT CODE PUTranslucent/Neutral 300ml 520105 20

White/Neutral 300ml 520110 20

White/Acetic 300ml 520125 20

Glazing SiliconeOnecomponentindustrialgradeacetoxy(acetic)curesiliconeforsealingandwaterproofingalltypesofwindowsandframes. A glass and glazing silicone.Uses:• Intheconstructionofshopfrontwindows• Installationofaluminiumwindowsbetweenglassandaluminium• Sealingaroundskylights,lightfittings• Constructionofglassdisplaycabinets• SealingofglassblocksandsomeplasticsFeatures and Benefits:• Highlyflexible• Waterproof• UVlightresistant• Suitableforinteriorandexteriorapplications• Permanentlyelastic

DESCRIPTION WEIGHT CODE PUTranslucent Acetic 300gm 520127 20

Fuller Sanitary Silicone Sealant 770Fullers 770 Sanitary silicone sealant is a high performance- neutral cure silicone sealant. Fullers 770 Sanitary silicone sealant is specifically designed for use in wet areas. Fullers 770 Sanitary silicone sealant contains a mould and mildew inhibitor and is suitable for contact with aluminium shower screens.Benefits:• Mouldandmildewresistant• Neutralcure–Willnotcorrodeconcreteorzinccoated/galvanisedsteel• Permanentlyflexible;±25%jointmovement• 25yearminimumdurability-ResistancetoweatheringandUVradiation• Resistanttovibration• Resistanttotemperatureextremes:-50°Cto150°C• Strongadhesion• Onepart-nomixing• Sagresistant–canbeusedinverticalandoverheadjoints

DESCRIPTION WEIGHT CODE PUTranslucent/Neutral 300gm 520115 20

Limitations: • Donotuseincontactwithabsorbentnatural

stones e.g. Marble, granite• Notpaintable• Donotuseonporoussurfaces(aprimermay

berequired)• Notrecommendedforglassorglazing.• Donotuseinpermanentlysubmerged

conditions.

Limitations:• Notrecommendedforstructuralglazing• Ensureallglassandsubstratesurfaces

are cleaned• Notrecommendedforsealingporous

surfaces• Donotuseonmetalsthatcontainzincor

copper• Notpaintable


ADHESIVESA

dhes

ives

2 PART RESINSAV201 UreaFormaldehydeResinAV201isaliquidUreaFormaldehyderesinwhichisreactedwithhardener as a two pack adhesive system. It can be used with a variety of filled or unfilled powder or liquid hardeners depending on the application. The cured resin is highly water resistant and is used in many aspects of solid timber joinery; furniture construction and door manufacture where strong stable bonds are required. AV201 is a high quality proven adhesive system exhibiting excellent bond strength, very high water/humidity and heat resistance. It has excellent sandability and wood stain/lacquer acceptance. It allows longer Open Time for assembly than the PVA and Crosslink PVA adhesive systems. Clear glue lines can be achieved with the use of either unfilled powder or liquid hardener systems. It is recommended for all joinery work where a non-creep, high bond strength, rigid glue line is required. It is suitable for use in veneering, door panel, standard and moulded plywood manufacture. The resin hardener system can be modified to suit individual applications.Uses:• Benchworkandassemblygluing• Chairframeassembly• Fingerjoiningforbothinternalandprotected external use applications• Veneertoparticleboardpressing• Curvedplywood• Edgejoiningsolidtimber,e.g.benchtops,tabletops,legs,posts• Doors–pressingplywoodorhardboardtotimberframes• RFcurepressingofveneer/plywoodassembliesFeatures and Benefits:• Highwater/humidityresistantbonds• Veryhighbondstrength• Nonflammable

DESCRIPTION WEIGHT CODEUREAFORMALDEHyDEResin Part A 5L 520021

Resin Part A 20L 5200212

CATALySTLF90PowderFastPartB(tosuit5L) 0.125kg 520023

LF90PowderFastPartB(tosuit20L) 0.625kg 5200231

FN(Winter)PowderFastPartB(tosuit5L) 0.6kg 520024

FN(Winter)PowderSlow(tosuit20L) 3kg 5200241

SN(Summer)PowderSlow(tosuit5L) 0.6kg 520055

SN(Summer)PowderSlow(tosuit20L) 3kg 5200551


Adh

esiv

es

AV260 Two-Part Crosslinking PVAAV260 is a fast setting, high solids, 2 pack, crosslinking PVA which when catalysed with Catalyst C Fast or Slow gives bonds of exceptional strength, heat and humidity resistance. The glue line is clear and has good stain and lacquer acceptance. AV260, when catalysed, has a long pot life, however, when applied and clamped or pressed, exhibits a rapid cure time. This property eliminates continual glue mixing and also permits faster turn around times in the press. An obvious limiting feature of fast cure under pressure is that it has a short assembly time. AV260 produces high strength bonds with difficult to bond timbers such as Silver Ash, Kwilla, Teak, Blackwood and Blackbean. It is suitable for cold or hot pressing applications. AV260 is recommended for assembly bonding with RF Curing Systems.Uses:• Edgegluingforfurniture/joinerywork• Paneltimberdoorassembly• Solidtimberassembly• Windowjoinery• Flushdoors(solidandhollowcore)• Bondingtimberveneerorplasticlaminatestocorestocksradio

frequency gluing• FingerjointingofsoftwoodspeciesforproductionofmouldingsFeatures and Benefits:• CanbeusedwithRFcuringequipment• Canbeusedincoldpressingandhotpressingapplications• Highbondstrengthtodifficulttimbers• Variouscureratesdependingoncatalystused• Waterbasedandnonflammable• Clearglueline.

DESCRIPTION WEIGHT CODECROSSLINK2 Pack Resin Part A 5L 5200125

2 Pack Resin Part A 20L 5200121

CATALySTPartBFast(tosuit5L) 0.165kg 5200122

PartBFast(tosuit20L) 0.66kg 52001221

PartBSlow(tosuit5L) 0.165kg 5200123

PartBSlow(tosuit20L) 0.66kg 52001231


ADHESIVESA

dhes

ives

HOT MELT ADHESIVESHotmelt AdhesiveSize: 17kgBucket• AustralianMadetoAustralianconditions,manufacturedbyBostik

Australia• GeneralPurposeAdhesiveforuseontimberveneer,melamine,ABS

& PVC• Formulatedforuseinmostconventionaledgebandingequipment.• Handytode-canter17kgbucketsreducingtheriskofspillageas

with current bags & boxes• Alltechnicaldatainformationoneachbucketforeasyreference

DESCRIPTION CODEEdgebond GP 526590

Hotmelt Adhesive - EdgebanderSize: 25kgApplication: Forautomaticedgebanders,suitableforbonding

veneer, resignated paper edges, PVC, Polyster and melamine resin edges

Characteristics: Lowmeltviscosity,shortinitialandsubsequentmelttimes, good adhesion as well as good oxidation and colour stability in melt. Customer trials before use are recommended

Packaging: Granulate

DESCRIPTION CODEJowatherm296.40 526595

Hotmelt Adhesive - EdgebanderSize: 15.4kgApplication: Wideareaofapplication,e.g.foredgesmadeof

veneer, melamine, polyester, ABS, PVC and resinated paper

Characteristics: Goodadhesionproperties,lowmeltviscosity.Goodoxidation and colour stability in the melt. Customer trials before use are recommended

Packaging: Specialcartridges,63mmx80mmlong.15.4kgnetper box

DESCRIPTION CODEJowatSlugs286.60 526596

Hotmelt Adhesive - Edgebander HOLZ-HERSize: 25kgType: JowathermspecialcartridgesforHOLZ-HERmachines.Application: Wideareaofapplication,e.g.foredgesmadeofveneer,solidwood,

polyester, PP, ABS, PVC and resinated paperCharacteristics: Goodadhesionproperties,lowmeltviscosity,goodoxidationand

colour stability in the melt. The product has a wide range of possible applications due to its good heat-resistance and long hot tack. Customer trials before use are recommended

Packaging: 48cartridgespercarton,63mmx80mmlong

DESCRIPTION CODEJowatUnfilledSlug286.30

526603


Adh

esiv

es

Hotmelt Adhesive - EdgebanderSize: 25kgApplication: Forautomaticedgebanders.Widefieldof

applications, e.g. for CPL and HPL, polyester, PVC, resinated paper edges, solid wood veneer edges. Also to be used as softforming and precoating hot melt adhesive.

Characteristics: Excellentperformingafterinitialmelting.Goodresistance to high and low temperatures, good adhesion. Good oxidation and colour stability in the melt. Customer trials before use are recommended


DESCRIPTION CODEJowatFilled288.60 526598

Hotmelt Adhesive - WrappingSize: 25kgApplication: Forwrappingprofilesmadeofsolidwood,

particleboard or MDF, with veneer, polyester and melamine resin laminates

Characteristics: Elastic,goodheatresistance,longopentimeandhigh hot tack. Low viscosity and good resistance to oxidation as well as good colour stability in the melt. The product has a wide range of possible applications due to its good wetting properties and good adhesion. Customer trials before use are recommended


DESCRIPTION CODEJowatUnfilled280.30 526597

Hotmelt AdhesiveSize: 15kgbagApplication: RAKOLLhotmeltadhesiveK4/570canbeusedfor

most types of edge strips which have been tested by the edge strip manufacturers and approved for the hot melt edgebanding method.

Characteristics: RAKOLLhotmeltadhesiveK4/570isanEVAbasedsynthetic resin with good working properties that can be used on edge banders. The adhesive melts and flows well. It is clean in use and non-stringing. RAKOLL hot melt adhesive K4/570 exhibits good bonding properties in connection with decorative laminate edge strips.

DESCRIPTION CODERakoll K4/570N 526601

White 526602


ADHESIVESA

dhes

ives

CONTACT ADHESIVES

Gel Grade ContactDescription:Bostik Gel Contact Bond is specially designed solvent based adhesive which will not drip or spill. Gel Contact Bond has high bond strength which increases on ageing and has excellent resistance to heat and water. It is especially suited to vertical surfaces. Gel Contact Bond will bond wood, leather,fabric,cork,etc.toavarietyofsurfacessuchasmetal,particleboard,masoniteetc:Precautions:Highlyflammable.Useonlyinwellventilatedareas.Keepawayfromnakedflamesandsourcesofignition.Nosmoking.Keeplidtightlyclosedwhennot in use.Clean up:To clean up tools, equipment and adhesive spills use mineral turpentine or white spirits.Storage:Minimum of 12 months from date of manufacture if stored under cover between5°Cand30°C.Storeinacool,dryplace,awayfromsourcesofignition.Features & Benefits:• Solventbased,highlyflammable• Excellentheatresistance• Excellentwaterresistance• Highbondstrength• Goodsagresistance• Dryfilmwillnotsupportcombustion

DESCRIPTION CODE302376 1 Litre 527008

302384 4 Litre 527009

Anchor Weld 101R Brush/Roller Grade Contact AdhesiveA heavy bodied general purpose Polychloroprene based contact adhesive offering high heat resistance, high green strength with a long open time. Can be used for bonding a variety of materials including decorative plastic laminates, wood, rubber, metal, leather, fabrics and others.Uses: • Foradheringlaminates,wood,plastics,leatherrubber,metal,concrete,PVCandrubberfoams• Verticalorhorizontalapplication• Flatsheetlaminating• Suitableforuseinheatproneareas• Suitableforuseinfurnitureoralliedindustries• Fixingplasticlaminates• Fixingrigidordecorativesurfacecoveringstowood,MDF,particleboard,plywoodleather

and metalFeatures and Benefits:• N-hexanesolventsafeformulation• Highheatresistance(100°C+)• Highearlygreenstrength• Highbuildadhesiveforporous,roughorcontouredsurfaces• Fasttouchdrytime• Onecomponent,nomixingrequired• Water-resistant• Flexible• Highperformance• MaybeappliedbybrushorscraperLimitations:• Donotuseoncopper,expandedpolystyrenefoam,unbackedPVCoruntreated

polyethylene plastics• Flammable.Donotusenearnakedflame• AllareaswhereAnchor-Weld101/101Rarebeingusedmustbewellventilated• Notrecommendedforexterioruse

DESCRIPTION CODEAW101R 4lt 527006

AW101R 20lt 527007


Adh

esiv

es

Mitremate Adhesive• Replacestraditionalfittingssuchasscrewsandnails• Typicalapplicationsinclude • Kitchen/BedroomFurniture(installationandmanufacture–

particularlycorniceandmitrejoints) • DecorativeMDFtrimmanufacture • Beadingforlaminatefloors • Generalwoodworkapplications • Pictureframing• Providesamuchfasterandconvenientbondingsolutionthan

traditional PVA and hot melt adhesive alternatives• Savestimeandhassle(Bondsinonlytenseconds)• Usesonlythreesimplesteps Step1 Sprayactivatoronto

one surface, allow to evaporate

Step 2 Apply adhesive onto the other surface

Step 3 Push both surfaces together and hold in position for 10 seconds

Mitre Mate Max KitContains a 100g adhesive and a 400ml Aerosol ActivatorOffers improved economies to industrial users, yet still available as a handy kit

DESCRIPTION CODEMax Kit 520081

HHR A/W 2700/2701 Spray Grade Contact AdhesiveA general purpose sprayable Polychloroprene contact adhesive, featuring high early green strength coupled with an excellent working tack life and good sprayability. May be used to bond a wide range of materials including wood, ferrous and non ferrous metals, natural and synthetic rubbers, rigid and flexible polyurethane foams and other similar materials.Uses:• Bondingdecorativelaminates• Bondingwood,MDFandparticleboard• Bondingsteel,aluminiumandplasterboard• Furnituremanufacturing• Forflatorpostformingapplications• Foradhesioninnaturalandsyntheticrubbers• Forbondingflexiblepolyurethanefoams• AvailableinclearorredtosuitapplicationFeatures and Benefits:• Veryhighearlygreenstrength• Heatresistant(100°C+)• FireratedtoAS1530.3• Excellentworkinglifeallowsforcorrectpositioning• AvailableinclearorredtosuitapplicationLimitations:• Donotuseoncopperorhighlyreactivemetals• Donotuseonexpandedpolystyrenefoam• Notrecommendedforexterioruse• Donotuseonauntreatedpolypropyleneorpolyethylene• Highsolidscontent• n-Hexanesafe• Goodresistancetooilandpetrol

DESCRIPTION CODE2700 Red 20lt 527000

2700 Red 200lt 527003

2701 Clear 20lt 527001

2701 Clear 200lt 527004


ADHESIVESA

dhes

ives

Fill-A-Gap HandimateFast setting flexible one component water based acrylic and crack filling sealant. For interior and exterior use.Uses:• Fastdrying• Easysandable• Canbepaintedoverin2hours• Non-sag• Goodwaterresistancewhencured• Fungusandmouldresistant• AcousticpropertiesFeatures and Benefits:• Sealingcracksinplasterboard,skirting,architraves• Sealingwindowanddoorframes• Sealingaroundceramictiles• Sealinglowmovementjoints• Crackfillingpriortopainting• Sealingcracksinbrickwork,concrete• SealingbetweenlightpartitionwallsLimitations:• Donotuseinwetapplications• Donotuseinexternalapplicationswhererainisimminentin4hours• Useonlyinlowmovementjointingandgapfillingapplications• Notsuitableforunderwaterapplicationsorareasinconstantwith

water


FILLER

Fuller’s Building FillerFuller Building Filler™ is a two part polyester putty designed to fill gaps and cracks in a wide variety of common building materials, where movement is not expected and a rapid finish is required.Benefits:• Fillsgaps,cracksandholesinmostcommonbuildingmaterials.• Suitableforinteriorandexterioruse• Easytomixandapply.• Setsrockhard,fast(30minutes),dependingupontemperatureand

conditions• Willnotshrinkorslump.• Easytosandandpaint.• Canbeplaned,drilled,nailedorscrewedUses:Useforfillingtimbercavities,finishingarchitrave’sanddoors,fillingmetalsurfaces, holes in fiberglass, repairing concrete and masonry.

DESCRIPTION CODE1kg 525975


Adh

esiv

es

CLEANERS & MISC

Squeeze BottleAdhesives empty glue bottle.

DESCRIPTION CODE500ml with Lid 554610

Replacement nozzle 554611

Sprayable Contact• Non-flammableadhesive(onlythepropellantisflammable)• Adjustablesprayfan• Coversupto7sq.m• EasyClean• Nomess• Longshelflife• Industrialgrade

DESCRIPTION CODE PU482g aerosol can 520030 20

Anchor Weld 901 Contact Cleaner/ThinnerAspecificblendofsolventstoreduceandthinPolychloroprene(Neoprene)adhesivespriortoapplication.Uses:• reduce viscosity of neoprene based adhesives•GeneralcleanerformetalandrubbersurfacesLimitations:• Donotexcessivelydiluteadhesive

DESCRIPTION CODEAW901 10lt 527012

AW901 20lt 527013

Nover Solve Solvent Cleaner• CitrusbasedsolventcleaneranddegreaserRemoves markings such as Pencil, Pen, Texta, Crayon and different types of glue from wood, laminates, Polyurethane coatings and Plastic Surfaces. Combines the natural degreasing properties of citrus oils with ethanol and hydrocarbons to quickly and effectively clean and degrease surfaces. Universallyacceptedinmanymanufacturingworkshopssuchasjoineries,kitchen, bathroom, cabinet and wood machinists, polyurethane and plastic moulding etc, to remove unwanted markings and glue. Evaporates completely from surface leaving no smear marks.CAUTION: Do Not use near naked flame. Consult your representative for correct application of product.

DESCRIPTION CODE5 Litre Drum 527020

500ml Spray Bottle 527020B

adhesives - nover · pdf filenover product catalogue 11.3 adhesives av180 mdf board &...

Documents