adulticiding module - frontier precision

Adulticiding Module Quick Start Guide

Version 3.5 Rev 3 - August 2017

ii

Frontier Precision Software License This is a legal agreement between you (either an individual or an entity); and Frontier Precision. By installing the Sentinel GIS software, you agree to be bound by the terms of this Agreement. The software is protected by United States copyright laws and international treaties. You may make one copy of the software solely for backup or archival purposes or transfer it to a single hard disk provided you keep the original solely for backup or archival purposes. You may not rent, lease, or transfer the software or copy the written materials accompanying the software. You may not reverse engineer, decompile, or disassemble the software.

Limited Warranty Frontier Precision warrants that the software media are free from defects in materials and workmanship under normal use for ninety (90) days from the date you receive them. This warranty is limited to you and is not transferable. Any implied warranties are limited to 90 days. Some jurisdictions do not allow limits on the duration of an implied warranty, so this limitation may not apply to you. The entire liability of Frontier Precision and its suppliers, and your exclusive remedy, shall be (a) return of the price paid for the software or (b) replacement of any software media that does not meet this warranty. Any replacement software media is warranted for the remaining original warranty period or 30 days whichever is longer. Frontier Precision does not warrant that the functions of the software will meet your requirements or that operation of the software will be uninterrupted or error free. You assume responsibility for selecting the software to achieve your intended results, and for the use and results obtained from the software. Frontier Precision disclaims all other warranties, expressed or implied, including but not limited to implied warranties of merchantability and fitness for a particular purpose, for the software and all accompanying written materials. This limited warranty gives you specific legal rights. You many have others, which vary from jurisdiction to jurisdiction. In no event shall Frontier Precision or its suppliers be liable for any damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business information, or other pecuniary loss) arising out of use or inability to use the software, even if advised of the possibility of such damages. Because some jurisdictions do not allow an exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you.

U. S. Government Restricted Rights The software and documentation are provided with Restricted Rights. Use duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or subparagraphs (c)(1) and (2) of the Commercial Computer Software-Restricted Rights at 48 CFR 52.227-19. Manufacturer is Frontier Precision, 154 1st Ave W., Jerome, ID 83338. This license is effective until terminated. It will terminate upon your breach of any term of this license. Upon termination, you agree that the software and accompanying materials, and all copies thereof, will be destroyed. This agreement is governed by the laws of the State of North Dakota. You acknowledge that you have read this agreement, you understand it, you agree to be bound by its terms, and that this is the

iii

complete and exclusive statement of the agreement between you and Frontier Precision regarding the software.

Questions? Should you have any questions concerning this Agreement, please call Frontier Precision at (208) 324-8006.

iv

Table of Contents AboutSentinelGIS...............................................................................................................................1

SentinelGISModules.................................................................................................................1

Larviciding............................................................................................................................................1

Adulticiding..........................................................................................................................................1

Surveillance..........................................................................................................................................2

ServiceRequest...................................................................................................................................2

SystemComponents,HardwareandSoftwareRequirements,InstallationInstructions...........2

FindingAdditionalInformation............................................................................................................2

HelpandUserGuides.................................................................................................................2

Training.......................................................................................................................................3

TechnicalAssistance............................................................................................................................3

SentinelSupport.........................................................................................................................3

HandheldandGPSSupport........................................................................................................4

EsriSoftwareSupport.................................................................................................................4

ConfigureDataLinkGISOptions...........................................................................................................8

MobileApplicationConfigurationUtility..............................................................................................8

CreateanAdulticidingMapfortheHandhelds.....................................................................................8

ExtractData.........................................................................................................................................8

Synchronize(SendFiles).......................................................................................................................8

MobileOperation................................................................................................................................8

Synchronize(ReceiveFiles/Merge/SendFiles)......................................................................................8

Analysis...............................................................................................................................................8

DataLinkGISOptions.........................................................................................................................10

RunandCloseOptions.............................................................................................................10

TransferOptions.......................................................................................................................10

v

PathOptions.............................................................................................................................11

AutomatedProcessesOptions.................................................................................................13

Devices.....................................................................................................................................14

SetPassword............................................................................................................................15

MobileApplicationConfigurationUtility............................................................................................16

General.....................................................................................................................................16

PickLists...................................................................................................................................17

PickListTypes....................................................................................................................................18

SortPickLists/SaveSort.....................................................................................................................18

Equipment................................................................................................................................19

Chemicals.................................................................................................................................20

Custom.....................................................................................................................................21

AdulticidingToolbarOptions..............................................................................................................22

SetFogAreaLayer....................................................................................................................22

SetFogRouteLayer..................................................................................................................23

SetNoSprayZoneLayer...........................................................................................................24

CreateaMapinArcMap....................................................................................................................26

LayerProperties.................................................................................................................................28

SymbologyandLabels..............................................................................................................28

DisplayScale.............................................................................................................................29

VisibleFields.............................................................................................................................30

CreatingNewLayersFromScratch.....................................................................................................30

CreateaFogAreaLayer...........................................................................................................30

AddNewFogAreas..................................................................................................................34

CreateaFogRouteLayer.........................................................................................................38

AddNewFogRoutes................................................................................................................41

vi

CreateaNoSprayZoneLayer..................................................................................................43

AddNewNoSprayZones.........................................................................................................46

ExtractData.......................................................................................................................................49

ReceiveFiles......................................................................................................................................51

Merge................................................................................................................................................51

SendFiles...........................................................................................................................................52

UserInterface....................................................................................................................................53

MainToolbar............................................................................................................................53

AdulticidingToolbar.................................................................................................................55

CreateSpraySessions...............................................................................................................56

Fogging.....................................................................................................................................60

ProximityChecking(Fogging)...................................................................................................63

OtherActivities.........................................................................................................................63

ViewingandReportingonFieldData.................................................................................................65

UsingtheMapViewFilter..................................................................................................................66

UsingtheDataUtilities......................................................................................................................68

CreateReports...................................................................................................................................70

SpraySessionDetailReport.....................................................................................................70

SpraySessionDetailWithMapReport....................................................................................70

SpraySessionSummaryReport................................................................................................70

ReportCriteria..........................................................................................................................70

FilterbyDateRange..........................................................................................................................70

OtherFilters.......................................................................................................................................71

ReportSubtitle...................................................................................................................................71

ActivityReport..........................................................................................................................71

ReportCriteria..........................................................................................................................71

vii

FilterbyDateRange..........................................................................................................................71

OtherFilters.......................................................................................................................................71

ReportSubtitle...................................................................................................................................71

Print&ExportReports.............................................................................................................72

1

Introduction

About Sentinel GIS

SentinelGISisyourcompletesolutionforrecordingandmanagingdatacriticaltocontrollingmosquitoes.Thiseasy-to-usepackagefeaturesmobileGISsolutionsformosquitocontrol,automatedsynchronizationbetweenthedesktopGISandthemobileGIS,andsupervisorytoolsmakingiteasyforsupervisorstocustomizeandmaintaintheirworkflowprocesses.ApplicationsarebasedonindustrystandardEsriArcGISandArcPadsoftwareyettheyarefullycustomizableforyourspecificneeds.

SentinelGISoffersfourapplicationmodules.Pickandchoosethemodulesthatfityourmosquitocontrolneeds.Modulescanbeaddedontothepackagewhenyouarereadytoimplementnewcontrolmethods.

Sentinel GIS Modules

Larviciding Tocontrolmosquitopopulations,fieldinspectorsfirstlocatestandingwaterbodiesthatserveasmosquitobreedinggroundsandapplycontrolagentsifmosquitolarvaeorpupaearepresent.FieldinspectorsprepareforfieldworkbysynchronizingtheirhandhelddevicewithadesktopcomputerusingDataLinkGIS.Inthefield,theynavigatetothewaterbodiesneedinginspection.Onceatthesite,thecrewmapsthesitewithGPS,recordsaninspection,orviewsapastinspection.Inspectorscanrecordtheapplicationofmultiplebiologicalagentsalongandviewpasttreatmenthistory.SentinelGIShelpsmanagetheinspectionscheduleonaper-sitebasis.

Adulticiding InAdulticiding,fog-sprayingisusedtokilladultmosquitoes.TheAdulticidingapplicationmanagessprayingactivitiestoefficientlyschedulepersonnelandequipmentwhileminimizingchemicalusageandcosts.Supervisorsprepareforsprayingactivitiesbydownloadinguser-specificapplicationsettings,accompanyingmaps,andGISlayersintotheirhandhelddevice.Inthefield,thesprayeroperatorlogsintotheapplication,whichthenrecordssprayactivities,includinglocation,time,chemicaltypeandamount.Sprayareascanbeviewedonamap.Backattheoffice,supervisorsautomaticallytransfer,merge,andupdatetheGIS.ArcGISprovidesdesktoptoolsformapdisplayandqueryincludingthecreationoffogareas.Supervisortoolsareavailableformanagingpersonnel,equipmentdetails,andchemicalsused.Pre-definedreporttemplatesquicklygeneraterequiredsprayactivityreports.

2

Surveillance Collectingdataonadultmosquitoesandotherdiseasevectorssuchasdeadbirdsandsentinelchickensfacilitatestheformulationofaneffectivecontrolplan.Surveillancemethodsinclude:

1. Monitoringmosquitopopulationdistributionandabundanceovertimeviatrapsandlandingcounts

2. Testingtrappedmosquitoesfordiseasesaffectinghumanoranimals3. Testingsentinelchickensordeadwildbirdsfordiseases

UsingSentinelGISSurveillance,supervisorsprepareforfieldactivitiesbydownloadingGISdatafortraplocations,mosquitospecies,sentinelchickenflockinformation,datacollectionforms,andmapsintothehandhelddevice.Inthefield,thetechniciannavigatestoormapstrapsites,recordstrapsitesurveys,conductssentinelchickenordeadwildbirdsurveys,andrecordslandingcountrates.ThisinformationisautomaticallytransferredintotheGISbackattheoffice.ArcGISprovidesdesktopGIStoolsformapdisplayandquery.Supervisortoolsenablemanagementoftrapinformation,laboratorysurveys,mosquitospecies,sentinelchickenflockanddeadbirddetails,andlaboratorytestresults.Predefinedtemplatesquicklygenerateawidevarietyofmaplayersandreportsforanalysis,includingmosquitoabundance,diseasedetails,andmosquitodiseasedistribution.

Service Request TheServiceRequestincludesaweb-baseddesktopapplicationforcreating,trackingandreportingincomingservicerequestsaboutmosquitoorothercustomerserviceactivity.Informationloggedincludeslocation,complaintsaboutbitingorswarmingmosquitoes,orrequestsformosquitocontrol.Analyzingthisinformation,theagencycanidentifytheproblemsources,applytreatmentsefficientlyandreducetheamountofpesticideused.Supervisorsprepareforfieldactivitiesbydownloadingservicerequestlocations,assignedrequests,andaccompanyingmapsintothehandhelddevice.Inthefield,theinspectormapstheservicerequestlocation,andupdatesservicerequestdetails.Backattheoffice,fielddataaremergedintoArcGIS.Supervisortoolsareavailabletoprioritizeservicerequests,establishworkzones,andidentifytrendsandproblemareas.Predefinedreporttemplatessummarizeservicerequestsoveraspecifiedtimeperiod.

System Components, Hardware and Software Requirements, Installation Instructions MoredetailsareprovidedintheSentinelGISInstallationGuide,whichprovidescompleteinstructionsoninstallationandconfigurationforeachSentinelmodule.Systemcomponentsandhardwareandsoftwarerequirementsforinstallationarealsodiscussedindetail.

Finding Additional Information

Help and User Guides SentinelGIShelpisavailableintheQuickStartGuide(ProgramFiles\ElecData\Mosquito\[ModuleName]\inPDFformat)andintheQuickReferenceGuide.TheQuickStartGuideprovidesoperatinginstructionsfortheSentinelGISArcMaptoolbars,includingsetupandconfiguration,mapqueriesanddatageneration,andreportgeneration.Italsoincludesinstructionsfor

3

DataLinkGISconfigurationandoperation.Instructionsforhandheldsoftwareoperationarealsoprovided.

ArcGISDesktopHelpisavailablethroughtheHelpmenuinArcMap.

ArcPadhelpisavailableintheArcPadUserGuide(ProgramFiles\ArcPadx.x\Help\),butitappliestothestandardArcPadinterface.

Onlineself-helpresourcesforhandhelddevices,includingdocumentation,operatingsystemorfirmwareupdates,supportnotesandbulletins,whitepapers,andFAQ’s,canbeaccessedoneachmanufacturer’sWebsite.ForTrimblehandhelddevices,gotowww.trimble.com/supportandclickthelinkforyourmodel.ForJuniperSystemshandhelddevices,gotowww.junipersys.com/supportandclickthelinkforyourmodel.

Training SentinelGIStrainingisavailablefromFrontierPrecision.Remoteassistance,includingproductorientationandinformaltask-orientedtraining,isincludedintechnicalassistance.Formalinstructor-ledon-sitetrainingisalsoavailablein1-,2-,or3-dayformats.Forinformationandpricing,pleasecontactFrontierPrecisionat(208)324-8006.

ArcPadGPSTraining(includingTrimbleCertifiedMobileGISTraining)isalsoavailablefromFrontierPrecision.ArcPadtrainingcanbeprovidedforanyhandhelddevicewithanyGPSreceiver.TrimbleCertifiedtrainingcanbeprovidedforArcPadwithPositionswithanyTrimbleGPShardware.IfyouwouldliketousestandardArcPadforotherdatacollectionprojects,pleasecontactusforatrainingscheduleorforon-sitetrainingoptions.

EsriVirtualCampusandinstructor-ledtrainingisavailableforArcGISDesktop.Seehttp://training.Esri.com/gateway/index.cfmforhelpdecidingwhichcoursesbestsuityourneedsortheneedsofyourusers.

Technical Assistance

Sentinel Support High-priorityunlimitedtoll-freephoneandemailsupportisavailablefromFrontierPrecision.IfFieldSeekerGISsoftwaremaintenanceiscurrent,pleaseusethecontactinformationbelowtocontactsupport.Thistechnicalsupportcoversthemobiledevices,serversetup,andFieldSeekerGISsoftwareconfigurationanduse.TocontactTechnicalSupport:FrontierPrecision

4

(208)324-8006,8AM–[email protected],pleasesupplyyourcontactdetails(name,company,email,phone)andthenatureofyourinquiry.ThishelpssupporttolocateyourinformationandhistorymorequicklyPleasenotethathigh-prioritytechnicalsupportdoesnotincludesoftwaremaintenanceforEsrisoftware,orhardwarewarrantyforTrimbleGPSequipmentorJuniperSystemshardware.EsriArcGISsoftwarehasSupportandMaintenanceextensionsavailableseparatelyfromEsri;seewww.esri.com/supportformoredetails.TrimbleGPSequipmentcomeswith1yearhardwarewarrantystandard,whichcanbeextendedtwoadditionalyears.PleasecontactFrontierPrecisionforFieldSeekerGISsoftwaremaintenancerenewalorhardwarewarrantyextension,andEsriforArcGISsoftwaremaintenance.Ifyouhavenotpurchasedsoftwaremaintenance,productupdatesandtechnicalsupportwillnotbeavailable.

Handheld and GPS Support Technicalsupportforyourmobiledeviceisavailablefromtheretailoutletwhereitwaspurchased,theequipmentmanufacturer,thewarrantyservicecompany(e.g.SquareTrade,Asurion),orFrontierPrecision,dependingonwhereyoupurchasedit.

Esri Software Support ArcGISDesktopandArcPadsoftwaresupportasitrelatestotheuseofSentinelGISisobtainedthroughElectronicDataSolutions.Technicalassistanceforissues,bugs,ordefectswithstandardArcGISorArcPadsoftwareisobtainedthroughEsriSupport.Technicalassistanceisincludedinannualsoftwaremaintenance.Evenifmaintenanceisnotcurrent,self-helpresourcesarealsoavailablefromESRI’sWebsite.

LiveSupportfromESRI:

(888)377-4575toll-freeOnlinerequest:http://support.Esri.com/index.cfm?fa=homepage.policies.gatewaySelf-helpresources,includingpatchesandservicepacks,userdiscussionforums,documentation,supportnotesandwhitepapers:www.Esri.com/support

6

Adulticiding Toolbar

TheAdulticidingtoolbarisavailableinArcMap.Ifitisnotvisible,turnitonbyselectingCustomize>Toolbars.

Thetoolbarcontainsthefollowingitems:

ExtractMapDataforMobileDevices(s).Chooselayerstoextractformobiledevices.AllmapdataispreparedforsendingtothehandheldsusingDataLinkGIS.

EditSpraySessions.Filteranddisplayspraysessiondataforeasyediting.

SetFogAreaLayer.SelectthelayerinthecurrentmapTableofContents(TOC)thatrepresentsthefogarea(zone)layer.Thisissubsequentlyusedinspraysessions.

SetFogRouteLayer.SelectthelayerinthecurrentmapTOCthatrepresentsthepre-definedfogroutelines.Thisissubsequentlyusedinspraysessions,andtoprovideoff-routewarningsinthefield.

SetNoSprayZoneLayer.SelectthelayerinthecurrentmapTableofContents(TOC)thatrepresentsnosprayareas.Thisisusedtoprovidewarningsinthefield.

FilterFoggerData/MapView/ClearFilter.Selectparametersfortodeterminewhatdatadisplaysinthemap.

MobileApplicationConfigurationUtility.SetupconfigurationoptionsfortheAdulticidingapplication,includingpicklistsandweatherstationintegration.

Reports.Reportsforspraysessionsandnon-sprayactivities,basedondaterange,driver,truck,chemical,sprayer,fogarea,andfogroute.

7

DataUtilities.UtilityforimportingAdapcoMonitorIVdata.

AboutSentinelGIS.Obtainversionandhelpinformation.

Workflow

Sentinel GIS Data Flow

1

Shapefiles

Geodatabase(file/SDE)

ServiceRequest

Database(MDB/SQL)

ArcMap Sentinel GISExtract

Interactive

DataLink Merge

ArcPad 7.1.1ArcPad 8

ArcPad 10

Automatic

Desktop DataLink GIS Transmit Directory

Mobile

DataLink GISDevice

Connection

Shapefiles

DataLink GISDevice

Connection

DesktopDataLink GIS Data Directory

DataLink Merge

Shapefiles

DataLink GIS Archive Directory

ThediagramaboveillustratestheSentinelGISdataflow.Thiswillassistyouinunderstandingatypicalworkflow.

TypicalSentinelGISworkflowinvolvesinitialsetuptasks,regulardatasynchronization,andanalysisincludingreportsandmapdatageneration.

Setuptasks-includingconfiguringDataLinkGISandtheSurveillanceconfigurationutility,creatingaSurveillancemap,andextractingdataforthemobiledevices-generallyareperformedonce,andthenonlyperiodicallyadjustedasneeded.

Synchronizationtasks-includingreceivingdatafrommobiledevices,mergingdatatothedatabase,andsendingdatabacktothemobiledevices-usuallyoccuronaregularbasis.

Analysisactivitiesoccurwheneverneeded.

8

Hereisasummaryofthetypicalworkflowsteps.Eachoftheseitemswillbecoveredinmoredetailinupcomingsectionsofthisguide.

Configure DataLink GIS Options DataLinkGISmanagesthedataflowbetweenhandheldsanddesktopPC’s,aswellasautomaticdatatransactionswiththeSentinelGISgeodatabase.Processedfielddataisarchived.

Configurationincludessettingfilepaths,auto-runoptions,andwhentomergefielddata.HandheldconfigurationinDataLinkGISincludesassigningahandheldIDandtransferset(s),suchasSurveillanceData,LarvicidingData,andServiceRequestData.

Mobile Application Configuration Utility Theconfigurationutilityisusedtosetuppicklistssuchasemployees,trucks,sprayers,andchemicals;generaloptionssuchasNewMountainNM150weatherstationintegration,andequipmentassignments.

Create an Adulticiding Map for the Handhelds CreateanArcMapMXDfilethatwillbeusedasthebasisformapappearanceinArcPadonthehandhelds.Configuringoptionssuchasdisplayscales,easy-to-readsymbologyandlabels,andfieldvisibility,willoptimizeArcPadperformanceanduserexperience.

Extract Data Choosewhichlayerstoextractforthemobiledevice.

Synchronize (Send Files) ConnecteachhandheldtothedesktopPCandsendfilesthroughDataLinkGIS.

Mobile Operation Recordspraysessions.Alsorecordnon-sprayactivitieswithatracklog.

Synchronize (Receive Files/Merge/Send Files) ConnecteachhandheldtothedesktopPCandreceivefilesthroughDataLinkGIS.Dataismergedtothegeodatabaseimmediately,oratatimespecifiedduringconfiguration.Oncealldataismerged,dataissentbacktoeachhandheld.

Analysis Filtermapdataandcreatereportsbasedonspecifiedcriteria.

9

Workflow – Memory Card Device

Sentinel GIS Data Flow

1

Shapefiles

Geodatabase(file/SDE)

ServiceRequest

Database(MDB/SQL)

ArcMap Sentinel GISExtract

Interactive

DataLink Merge ArcPad 10

Automatic

Desktop DataLink GIS Transmit Directory

Mobile

DataLink GISMemoryDevice

Shapefiles

DataLink GISMemoryDevice

DesktopDataLink GIS Data Directory

DataLink Merge

Shapefiles

DataLink GIS Archive Directory

ThediagramaboveillustratestheSentinelGISdataflowwithaMemoryCarddevice.ThisisintendedtosupportdatacollectionusingaWindowslaptop,whereuserscantakeadvantageofincreasedscreensize,processorspeed,RAM,anddatastorage.Inmostrespectstheworkflowisthesame,buttherearesomeimportantdifferences.

- DataLinkGISsendsArcPadfielddataandSentinelGISprogramfiles,applets,andconfigurationfilestoamemorycarddeviceonaconfigureddriveletter.ThismeansthatthePCwithDataLinkGISrequiresacardreader(ifusingSDcards).

- ThememorycarddeviceisremovedfromthecardreaderandinsertedintotheWindowslaptop.

- TheSentinelGISMobileApplicationManagerisrunfromthememorycarddevice(anapplicationshortcutshouldbecreatedonthedesktopoftheWindowslaptop).

- SentinelGISdataiscollected- SentinelGISisshutdown- ThememorycarddeviceisremovedfromtheWindowslaptopandinsertedintothecardreader

DataLinkGISreceivesdatafromthememorycarddeviceandprocessesit

10

Configuration AsmallamountofconfigurationisrequiredpriortousingSurveillance.It’seasytoadapttheprogramtoyourdistrictororganization.Whenstaff,products,orprioritieschange,theprogramchangeswithyou.

DataLink GIS Options DataLinkGISautomaticallysynchronizesdatabetweenhandhelddevicesandyourPC.Mapdata,picklists,andsurveyswillautomaticallybesenttoanymobiledevicethatisrecognizedbyDataLinkGIS.Anydatacollectedinthefieldwillautomaticallybedownloadedandprocessedwhenarecognizedmobiledeviceisconnected.

Run and Close Options

1. ClickOptions>Run/Close.Thetoptwooptionsarecheckedbydefault.a. AutomaticallyrunDataLinkGISonmobiledeviceUSBconnection(Note:DataLinkGIS

doesnotautomaticallyrunwhenamemorycardispluggedin)b. BringprogramtofrontonmobiledeviceUSBconnectionc. Showconfirmationpromptbeforeclosingprogram

2. PressOKtosaveyourchanges.

Transfer Options

1. ClickOptions>Transfer.Alloptionsarecheckedbydefault.a. Automaticallyreceivedatafilesb. Automaticallysendfiles

11

c. Archivefilesonmobiledeviceaftersuccessfulreception.Fileswillberetainedfor7days.

d. Cleardatamobiledeviceaftersuccessfulreception(afterarchiving,ifselected)2. PressOKtosaveyourchanges.

Path Options BestPractices:

- Ataminimum,settheMergeoutput(SentinelGISdatabaseorSDEconnectionfileandSentinelConfigurationManagersettingsarestoredhere),Mobiledevicesoftware(programfiles,applets,andconfigurationfilesarestoredhere),Archivedatato,Datawitherrors,andTransfersetconfigurationfiles(send-onlyfilelistsarestoredhere)toasharednetworkdirectory.

- ReceiveandTransmitpathsmaybeonanetworkdirectoryorlocal,butbeawarethatsettingthereceivepathtoanetworklocationincreasesnetworktrafficandmayincurdatatransferdelaysandpermissionsmanagement.

- UseUNCpathsinsteadofmappeddriveletters(forexample,\\MY_SERVER\Shared\Sentinelvs.Z:\Sentinel).

- Ataminimum,backuptheMergeoutputandMobiledevicesoftwarefoldersregularly.

1. ClickOptions>FilePaths.Setfilepathlocationstoalocalornetworklocation.a. Basepath:thedefaultbasepathisC:\ProgramFiles\DataLinkGIS\forWindowsXPand

C:\DataLinkGIS\forWindows7or8.Changestothebasepathwillbeinheritedbyallotherpaths(exceptmemorydevicedriveletter).

b. ReceiveDataTo:Thisisthelocationfielddatawillautomaticallybereceivedtowhenarecognizeddeviceisconnected.Toavoiddataoverwrite,sub-foldersarecreatedbyTransferSet,Date,DeviceID,andSuffix.Forexample,ifAdulticidingDataisreceived

12

fromamobiledevicewhoseIDis‘Archer_5’onApril29,2013,thisdatawouldbereceivedto‘c:\ProgramFiles\DataLinkGIS\Data\AdulticidingData\20130429\Archer_5-01.’Ifdataisreceivedasecondtimeonthesamedayfromthesamemobiledevicethedatawouldbereceivedto‘…20130429\Archer_5-02.’

c. TransmitDataFrom:ThisisthelocationwhereArcPadmapdatawillbeextractedbytheSentineltoolbarinArcMaporbyDataLinkMerge.DataLinkGISsendsfilethatarelocatedinthisdirectorytorecognizedmobiledevices.

d. MergeOutput:Thisisthelocationwherethe‘SentinelGIS’geodatabaseorSDEconnectionfileiscreatedwhendataisextractedforthefirsttime,ortheSentinelGISconfigurationutilityisrunforthefirsttime.AllfielddatathatisprocessedbyDataLinkMergewillbemergedtothegeodatabasethatiscontainedinthispathortheSDErepositoryindicatedbytheSDEconnectionfileinthispath.ThecentralizedSentinelConfigurationManager(SCM)configurationisalsostoredinthispath.

e. MobileDeviceSoftware:ArcPadappletfilesandprogramsettingsthatarecontainedherewillbesenttorecognizedmobiledevicesusingDataLinkGIS.ManyoptionssetintheSentineltoolbarinArcMapwillmakechangestoconfigurationfilescontainedinsub-directoriesofthisfolder.

f. ArchiveDataTo:WhenDataLinkMergeruns,allvaliddatainthe‘ReceiveDataTo’folderisfirstmergedtothegeodatabase,andthenarchived.Sub-foldersarecreatedbyTransferSet,Date,DeviceID,andSuffixaspreviouslydiscussed.

g. DataWithErrors:IfanyportionoftheDataLinkMergeprocessfailsforaparticulardatafolder,itismovedhere,sothatotherdatafolderscansubsequentlybeprocessed.

h. TransferSetConfigurationFiles:Eachmodulecreatesa“send-onlyfilelist”whendataisextractedusingtheSentinelGIStoolbarinArcMap.Theconfigurationfilesarecreatedinthisdirectory.

i. MemoryDeviceDriveLetter:IfmobiledatacollectionwillbeperformedonaWindowslaptop,DataLinkGISsynchronizesdatatoamemorydevice(SDcardorotherremovablememory).SpecifythedriveletterassignedtothismemorydevicebyWindows.

j. LogMessagestoMachine:Thecomputernamewheretheloggingserverresides.Ifinstalledlocally,thisis‘localhost’orblank.

13

Automated Processes Options

1. ClickOptions>AutomatedProcesses.ChecktheboxtoEnableAutomatedProcessesonDataReceptionifyouwouldlikeDataLinkMergetoprocessfielddatathatisreceivedfromarecognizedmobiledeviceassoonasitisreceived.Thisoptionworkswellifyouhaveasmallnumberofmobiledevices.

2. Optionally,unchecktheboxtoEnableAutomatedProcessonDataReception,andchecktheboxtoEnableScheduledAutomatedProcesses.PresstheAdd…buttonandbrowsetoc:\ProgramFiles\DataLinkGIS\.SelectDataLinkMerge.exe.Setthetimefortheautomatedprocesstorun.Thisoptionworkswellifyouhavealargernumberofmobiledevices.WhenDataLinkMergerunsatthespecifiedtime,alldatathathasbeenreceivedfromrecognizedmobiledevicesthathasnotyetbeenmergedwillbeprocessed.PleaseNote:DataLinkGISmustberunningatthespecifiedtimefortheautomatedprocesstoexecute.AnotheroptionissimplytorunMergemanuallyfromtheDataLinkGIStoolbar.TheWindowsTaskSchedulercanbeusedtoscheduleMergetorunwhetherDataLinkGISisopenornot.

14

3. ClickOKtosavechanges.

Devices 1. ConnectyourmobiledevicetoyourPCusingMicrosoftActiveSyncorWindowsMobileDevice

Center.2. DataLinkGISwillshowthatadeviceisconnected,butnotrecognized.

3. ClicktheDevicesbutton.

4. Thefollowingdialogdisplays.DeviceIDsarecreatedandassignedontheleft.Available

transfersetsarelistedinthemiddle.Device-TransferSetassignmentsarelistedontheright.

5. ClicktheNewbuttonundertheDeviceIDslist.TypeinauniquedeviceIDandpressEnter.The

IDwillbeaddedtothelist.TheDeviceIDlistcanbecreatedevenifadeviceisnotconnected.6. MakesurethenewIDishighlightedandclicktheAssignSelectedIDtoDevicebutton.The

currentlyconnecteddevicewillbegiventheselectedID.Ifamobiledeviceandmemorycarddevicearebothconnected,theusermustselectoneortheother.

15

7. MakesurethenewIDishighlighted,andthenselecttheTransferSettoassigntothedevice.PresstheAdd->buttontoassignittotheselecteddevice.Multipletransfersetscanbecreated.

8. ClicktheOKbutton.ThedisplayshouldnowchangetoindicatethattheIDisrecognized.Also,theactivitylogwillindicatewherethedatapathwillbeonthedevice.ThisiscreatedontheSDCardonthemobiledevice(ifthereisone),oronthefirstnon-volatilestoragethatisfound(lookinginreversealphabeticalorder),suchasBuilt-inStorage,SD-MMCCard,orStorageCard.Ifnoremovablememoryisfound,thedatapathwillbecreatedin\MyDocuments.

Set Password AllDataLinkGISoptionscanbepassword-protected.Thispreventsinadvertentchangestofilepaths,transfersettings,ordeviceassignments.

1. ClickOptions>SetPassword.2. Typeinthenewpassword.Confirm,thenpressOK.

16

Mobile Application Configuration Utility Adulticidingconfigurationoptionsallowyoutoadapttheprogramtoyouroperation,andtoadjustastimegoeson.

1. StartArcMap.2. SelectAdulticiding>MobileApplicationConfigurationUtility

General Configuregeneraloptionsfortheprogram.

Optionally,checktheboxto“ReadweatherdatafromNewMountainNM150weatherstation”andsettheCOMportthattheweatherstationwillbeconnectedtoonthemobiledevice(thiswilllikelybeaBluetoothCOMport).Thisoptionwillenablefunctionalityonthemobiledevicetoreadtemperature,windspeed,andwinddirectiondirectlyfromaweatherstationmountedonthetruck.Weatherinformationisstoredwitheachspraypointrecord.

17

Pick Lists Picklistsareeasytoconfigure.Theyareusedbythemobiledeviceanddesktopeditingtools.

1. Selectthepicklistyouwouldliketoedit.

2. Toaddtothelist,typein‘Name/Text’and‘Value’thenpressAdd.The‘Name/Text’appearsinthepicklistonthehandheld,whilethe‘Value’getsstoredinthedatabase.

3. Tomodifyanitemalreadyonthelist,selectit,enternewtextforName/Text,enternewtestforValue,andpressUpdate.

4. Todeleteanitemfromthelist,selectitandpressDelete.

18

5. The“Clear”buttonisonlyenabledwhenanexistinglistitemisselected.Pressing“Clear”willclearthecontentsofName/TextandValuesoyoucanenteranewpicklistitem.Itwillnotclearthelistordeletetheselectedvaluefromthelist.

Pick List Types

• Users.Driverlist.• Trucks.Listofvehicles.• WindSpeed.Windspeedcategories.• Activity.Listofactivities,foggingandnon-fogging.

Sort Pick Lists/Save Sort

Picklistscanbesortedbydragginganddroppinganitemtoitsdesiredplaceinthelist.Forexample,youcandragmostoftenusedchoicestothetopofthelist.

Picklistscanalsobesortedalphabetically.ClickonthecolumnheadingforName/TextorforValuetosortfromAtoZ.ClickagaintosortfromZtoA.

ClickSaveSorttosavechangestothepicklistorder.

19

Equipment Definesprayequipment,andassignsprayerstotrucks.

Typeinequipmentname,equipmentnumber(serialnumber,propertytagnumber,etc),sprayercalibrationvalue,andfoggertypeforeachsprayerthatisinuse.PressSavetoaddtheequipmenttothelist.PleaseNote:TheEquipmentNamemustbeunique.Supportedfoggertypes:B&GPhoenix,LondonFogger,CurtisDyna-Fog,andClarkeSmartFlow.

EnteringthecorrectcalibrationvalueforyourfoggersisextremelyimportantbecauseitisusedtocalculatetotalvolumeofchemicalsusedforB&GPhoenixandLondonFoggers.

Tomodifyequipmentdetails,selectanitemonthelist,makechanges,thenpressUpdate,orpressCleartoleavethedetailsastheywerebefore.

20

Toremoveanitemfromthelist,clickanitemonthelistandpressDelete.

Youwillbeaskedtoconfirmthisaction.

Theequipmentlistcanbesortedlikeotherpicklists,andthesortordercanbesaved.

Toassignasprayertoavehicle,selectthesprayer,clickthedrop-downnexttoAssigntoTruck,thenpressAssign.

Toremoveanassignment,selecttheassignmentthenpressRemove.

Chemicals Createthelistofchemicalsyourdistrictoragencyuses.

Tocreatealistofchemicalsthatwilldisplayinthemobileapplication,youmustentertheName,MixingAgent/Diluent,MixRatio,ActiveIngredientPounds/Gallon,andEPARegistrationNumber.TheCodeis

21

optional.Note:Ifthechemicalhasmorethanoneactiveingredient,itisuptoyoutodecidewhethertoenterthetotalAIpounds/gallon(fromthelabel)ofallactiveingredients,oronlythemainone(suchaspermethryn).

PleaseNote:Ifyouhavecertainchemicalsthatcanbeappliedatdifferentmixratios,pleaseindicateintheChemicalNamewhatthemixratiois.Forexample,ifAqualuer20-20canbeusedundiluted,ordiluted1:4or1:5,thenyourchemicalnamescouldbe‘Aqualuer20-20(MR0),’‘Aqualuer20-20(MR4),’and‘Aqualuer20-20(MR5).’

Tomodifychemicaldetails,selectanitemonthe,makechangesandthenpressUpdate.PressCleartoleavethedetailsastheywerebefore,ortoclearthetextboxessoyoucanaddanewchemical.

Toremoveachemicalfromthelist,selectitandpressDelete.Youwillbeaskedtoconfirmthisaction.

Custom Setupcustomdatacollectionfieldsthatwillbevisibleonthemobiledevicewhenyouloginandwhenyouendasession.

22

• Alias–typeinafriendlynamefortheuser-definedfield.Thisiswhatthedriverwillseewhenlogginginorendingasession.

• Visible–checktomakethefieldvisibleonthemobiledevice.

• Required–checktomakefieldentryrequired.

• UsePicklist–checktouseapicklist.ClickEditPicklisttoentervalues.

Adulticiding Toolbar Options

Set Fog Area Layer Afogarea(zone)layerisanon-overlappingpolygonlayerthatrepresentsgeographicregionscontainingfogactivities.ThesegeographicregionscanbedefinedinanywayyouwouldlikeusingstandardArcGISeditingtools.

Iffogareasareused,itisnecessarytospecifywhichpolygonlayerinthecurrentmaprepresentsthefogareas,andwhichfieldinthefeatureclasstablecontainsthenamesofthefogareas.

ClicktheAdulticidingdrop-down,thenclickSetFogAreaLayer.

Selectthelayerrepresentingfogareas(onlypolygonlayerswillbelisted),andthefieldcontainingfogareanamesandthenpressSave.

Ifafogarealayerisspecified,fogsessiondetailswillautomaticallyrecordthefogareathatthesessionwasstartedin.Also,theSpraySessionandActivityreportswillgrouporfilterreportdatabyfogarea.

23

Set Fog Route Layer Afogroutecanbedefinedasalinearfeaturethatdescribesthepreferredpaththefoggertruckshouldtakewhiledriving.Afogroutelayercontainstheselinefeatures,eachofwhichhasauniquename.ThesefogroutescanbecreatedusingstandardArcGISeditingtools.

Iffogroutesareused,itisnecessarytospecifywhichlinelayerinthecurrentmaprepresentsthefogroutes,thefieldinthetablethatcontainsfogroutenames,thewarningdistance,andoptionallyasoundfiletouseforthewarningtone.

ClicktheAdulticidingdrop-down,andthenclickSetFogRouteLayer.

Selectthelayerrepresentingfogroutes(onlylinelayerswillbelisted),thefieldinthetablethatcontainstheroutenames,thewarningdistance,andthesoundfiletouseforthewarning.

WhentheGPSpositionismorethanthewarningdistanceawayfromthefogrouteline,astatusmessagewilldisplayandawarningtonewillsound.

PleaseNote:Thewarningdistanceisinmapunits,whichisdeterminedbythespatialreferenceofthedataframe.Generally,ifthespatialreferenceisaUTMcoordinatesystem,themapunitsaremeters;ifthespatialreferenceisaUSStatePlanecoordinatesystemandzone,themapunitsareusuallyUSSurveyFeet.Toverifythemapunits,clicktheViewmenu>DataFrameProperties.ClicktheCoordinateSystemtabandnotetheLinearUnit.

24

AlsoNote:TheWarningSoundFiledoesnotneedtobespecifiedforawarningtonetosoundonthemobiledevice.Bydefault,thewarningtoneisadefaultWindowsMobiletone,amild‘ping.’Youmayspecifyanother.wavsoundfileofyourchoice.The.wavfilemustbeuncompressedPCMformat.Toverifythis,viewpropertiesofthefileinWindowsExplorer.

Ifafogroutelayerisspecified,fogsessiondetailswillautomaticallyrecordthefogrouteforthesession.Warningmessagesandtoneswillbeemployedwhenafogrouteisspecified,anda‘zoomtoroute’toolwillbeenabledinthemobilesoftware.Also,theSpraySessionandActivityreportswillgrouporfilterreportdatabyfogroute.

Set No Spray Zone Layer Areasthatshouldnotbetreatedwithchemicalscanbedefinedas‘NoSprayZones.’Asinglenosprayzonelayercontainsallthesepolygonfeatures.ThesepolygonfeaturescanbedefinedanywayyoulikeusingstandardArcGISeditingtools.Thisincludescopy/pasteformotherlayers(e.g.,parcelsorlandownership),buffer(e.g.,addresspoint),anddrawingtools.

Ifno-sprayzonesareused,itisnecessarytospecifywhichpolygonlayerinthecurrentmaprepresentstheno-sprayzones,thewarningdistance,andoptionallyasoundfiletouseforthewarningtone.

ClicktheAdulticidingdrop-down,andthenclickSetNoSprayZoneLayer.

Selectthelayerrepresentingno-sprayzones(onlypolygonlayerswillbelisted),thewarningdistance,andthesoundfiletouseforthewarning.

25

WhentheGPSpositionislessthanthewarningdistanceawayfromano-sprayzone,astatusmessagewilldisplayandawarningtonewillsound.

PleaseNote:Thewarningdistanceisinmapunits,whichisdeterminedbythespatialreferenceofthedataframe.Generally,ifthespatialreferenceisaUTMcoordinatesystem,themapunitsaremeters;ifthespatialreferenceisaUSStatePlanecoordinatesystemandzone,themapunitsareusuallyUSSurveyFeet.Toverifythemapunits,clicktheViewmenu>DataFrameProperties.ClicktheCoordinateSystemtabandnotetheUnitofMeasure.

AlsoNote:TheWarningSoundFiledoesnotneedtobespecifiedforawarningtonetosoundonthemobiledevice.Bydefault,thewarningtoneisadefaultWindowsMobiletone,aquiet‘ping.’Youmayspecifyanother.wavfileofyourchoice.

Ifano-sprayzonelayerisspecified,warningmessagesandtoneswillbeemployedwhentheGPSpositioniswithinthewarningdistanceofano-sprayzone.

Ifano-sprayzonelayerisnotspecified,warningmessagesandtoneswillnotbeemployed.

26

Creating an Adulticiding Map for the Mobile Devices CreateamapinArcMapthatcontainsthelayers,symbology,andsettingsthatwillbeusedonthehandheldsintheArcPadmap.Afterthemapissetup,extractitforsendingtothehandheldswithDataLinkGIS.

Create a Map in ArcMap 1. InArcMap,presstheAddDatabutton.

2. IfyouareusingArcGISforthefirsttime,pressConnecttoFoldertosetupafolderconnection.

3. Browsetothefolderyou’dliketoconnecttoandpressOK.Forexample,ifallofyourGISdataisonC:\GISData\orZ:\Users\Public\GISData\,addthatfolderconnection.

27

4. BrowsetothelocationoftheGISdatathatyouwouldliketouseinthemobileapplication.(ForafulllistingofdataformatsthatarecompatiblewithArcMap,seeArcGISDesktopHelp.Searchfor“DataformatssupportedinArcGIS”.PleasenotethatnotalldatathatiscompatiblewithArcMapcanbeextractedforuseonamobiledevice.Forexample,ArcGISOnlinecontent,imagesinanImageServer,orStreetMapdatacannottypicallybeextractedfromArcMap,althoughtheremaybealternativemethodsforcreatingastaticcopyofthisdata.)Selectyourdatalayer(s)andpressAdd.HolddowntheCtrlkeyonyourkeyboardtoselectmorethanonelayer.

5. Right-clickthedataframeandselectProperties.

28

6. Verifythecoordinatesystemandmapunitsusedinthedataframe.Bydefault,thiswillbethecoordinatesystemofthefirstlayerthatisaddedintothedataframe.PleaseNote:ThedatathatwillbesenttoArcPadwillbecreatedinthecoordinatesystemofthedataframe.

Layer Properties Setlayerproperties,includingsymbology,labels,scaleranges,andvisiblefields.ThisoptimizesthemapappearanceandprogramperformanceinArcPad.

Symbology and Labels 1. IntheArcMapTableofContents,clickdirectlyonthesymbolforagivenlayer.

2. SelectthedesiredsymbolandcolorintheSymbolSelectorandpressOK.3. Tosettransparencyforpolygonfeatures,sothatotherfeaturesarevisibleonthemap

underneaththem,right-clickthelayernameintheTableofContentsandselectProperties.InLayerProperties,selecttheDisplaytab.Enterthe%transparencyandclickApply.

29

4. ClickontheLabelstab.Checktheboxtolabelfeatures.SpecifyfontsettingsandclickApply.

Display Scale ConfiguringdisplayscalesettingsimprovesArcPadperformanceandmapreadability.Ifalayercontainsthousandsoffeaturesandwouldtakealongtimetodrawatthefullmapextents,setthedisplayscalesothatthelayerisonlydrawnwhenyouzoominonthemap.

1. InLayerProperties,clickontheGeneraltab.Clicktheradiobutton‘Don’tshowlayerwhenzoomed:Outbeyond:’andspecifyanappropriatescale.ClickApply.

30

Visible Fields Turningofffieldsforbackgroundlayerssuchasroads,parcels,sectionlines,etc.,greatlyreducesfilesizeandimprovesprogramperformance.

1. InLayerProperties,clickontheFieldstab.Unchecktheboxnexttoanyfieldsthatarenotneededonthemobiledevice.

2. ClickApply,orOKtocloseLayerProperties.

Creating New Layers From Scratch

Create a Fog Area Layer Ifafogarealayerdoesnotalreadyexist,standardArcGISDesktopeditingtoolscanbeusedtocreateone.Briefinstructionsforcreatingandeditingafogarealayerarecontainedhere.

FormoredetailedinstructionregardingeditingdatainArcGIS,seeESRI’sTrainingWebsiteathttp://training.esri.com.Severalself-studyclassesareavailable,includingGettingStartedWithGIS,afreecourse,andLearningArcGISDesktop.Instructor-ledcoursesarealsoavailable,includingIntroductiontoArcGISIandII.

Fogareascanbeusedonthemobileapplicationtokeeptrackofwhereafogsessiontakesplace,andinreporting.Pleasenotethatwhenafogsessionisstartedonthemobiledevice,thefogareawherethesessionbeginsisstored(iffogareasareconfigured).Ifthefogsessionwillcrossintoanotherfogarea,

31

pleaseendthesessionandstartanewone;or,ifpossibledefinethefogareastocompletelyencompassanyfogroutes(ifconfigured)orpotentialfogsessions.

1. StartArcCatalogbygoingtoStart>AllPrograms>ArcGIS>ArcCatalog,orbyclickingontheCatalogbuttoninArcMap.

2. BrowsetothelocationoftheSentinelGISgeodatabase.Bydefault,thisisc:\ProgramFiles\DataLinkGIS\MergedFiles.

3. Right-clickonthegeodatabase,thenselectNew>FeatureClass.

32

4. Enterthefeatureclassname,e.g.‘Fog_Area.’ThetypeoffeaturesstoredwillbePolygonFeatures.DonotspecifyMorZvaluestobestored.PressNext.

5. Nextspecifythecoordinatesystemforthefeatureclass.PresstheImportbutton.

33

6. BrowsetotheSentinelGISgeodatabase.

7. Selectthe‘Fogger_Log’featureclassandpressAdd.

8. Noticethatthecoordinatesystemofthenewfeatureclassisnowthesameastheotherfeatureclassesinyourgeodatabase.Inthisexample,thecoordinatesystemisUSStatePlaneNAD1983,IdahoCentral.ClickNext.

9. ForXYTolerance,acceptthedefaultvaluesandpressNext.ForDatabasestorageconfigurationacceptthedefaultvaluesandpressNext.

34

10. Onthefinalpanel,defineadditionalfieldsinthefeatureclasstable.ObjectIDandShapeareautomaticallycreated.YouwillneedatleastoneadditionalfieldfortheName.ClickinthefirstblanklineunderShapeandtypein‘Name.’SpecifythatthefieldtypeisText.

11. Otherfieldscanbeaddedaccordingtoyourpreference.Whenallfieldsaredefinedasyouwouldlike,clickFinish.YourfeatureclassiscreatedandaddedtotheSentinelGISgeodatabase.

12. CloseArcCatalog.

Add New Fog Areas 1. StartArcMapbyclickingStart>AllPrograms>ArcGIS>ArcMap.2. Openyourexistingmap.3. AddtheFog_ArealayerthatwascreatedinSection6.3bypressingtheAddDatabuttonand

browsingtoyourSentinelGISgeodatabase.IfyouusedtheCatalogwindowinsideArcMaptocreatetheFog_Arealayer,itwillalreadybeinyourmap.

35

4. Setsymbologyforthefogarealayersothatitwillbevisibleonthemobiledevice.Forexample,thisfogarealayerissettohollowfillwithathickredoutline.

5. IftheEditortoolbarisnotalreadydisplayed,clickCustomize>Toolbarsandturniton.

6. ClickEditor>StartEditingtoopenaneditsession.

7. Ifprompted,selecttheFog_ArealayertoeditandpressOK.

36

8. IntheCreateFeaturespanel,clickonFogArea.

9. Clickeachlocationonthemapwhereyouwouldliketoaddavertex.Asnappingiconandtipdisplaysasyoumouseoverexistingmapfeatures.Thesketchdisplaysyourfeatureinprogress,andwhatthefeaturewouldlooklikeifthesketchwerefinished.(Formoreinformationoneditingfeaturesorsnapping,seetheArcMapHelpIndex,underthesubject“WhatisEditing?”and“AboutSnapping.”)

10. Double-clicktoclosethefeatureorright-clickandselectFinishSketch.

37

11. PresstheAttributesbuttonontheEditorToolbar.

12. Enterattributesintheattributeswindow(inparticularthenameofthefogarea/zone–makesureitisunique).

13. ContinueaddingadditionalfogareasusingthestandardEditortools.Whenfinished,clickEditor>StopEditing.

14. Whenpromptedtosaveedits,clickYes.

15. Topreparedataformobiledevice,clickAdulticiding>ExtractMapDataforMobileDevice(s).NexttimemobiledevicesareconnectedtoDataLinkGIStheywillbeupdatedwithnewlycreatedFogAreas.

38

Create a Fog Route Layer Ifafogroutelayerdoesnotalreadyexist,standardArcGISDesktopeditingtoolscanbeusedtocreateone.Briefinstructionsforcreatingandeditingafogroutelayerarecontainedhere.


Fogroutesdonothavetobeused,butiftheyare,themobileapplicationwillprovideawarningiftheGPSpositionismorethantheconfiguredwarningdistanceawayfromthefogroute.Iffogroutesareconfigured,butafogsessionneedstoberecordedinanareawhereafogroutedoesnotexist,thereisa‘MiscellaneousRoute’choiceavailableonthemobileapplication.

1. StartArcCatalogbygoingtoStart>AllPrograms>ArcGIS>ArcCatalog,orbyclickingontheCatalogbuttoninArcMap

2. BrowsetothelocationoftheSentinelGISgeodatabase.Bydefault,thisisc:\DataLinkGIS\MergedFiles.


39

4. Enterthefeatureclassname,e.g.‘Fog_Route.’ThetypeoffeaturesstoredwillbeLineFeatures.DonotspecifyMorZvaluestobestored.PressNext.


40


7. Selectthe‘Fogger_Log’featureclassandpressAdd.8. Noticethatthecoordinatesystemofthenewfeatureclassisnowthesameastheotherfeature

classesinyourgeodatabase.Inthisexample,thecoordinatesystemisUSStatePlaneNAD1983,IdahoCentral.ClickNext.

9. ForXYTolerance,acceptthedefaultvaluesandpressNext.PressNextonthenextpanelalso(configurationkeyword).

10. Onthefinalpanel,defineadditionalfieldsinthefeatureclasstable.ObjectIDandShapeareautomaticallycreated.YouwillneedatleastoneadditionalfieldfortheName.ClickinthefirstblanklineunderShapeandtypein‘Name.’SpecifythatthefieldtypeisText.

41

11. Additionalfieldscanbeaddedaccordingtoyourpreference.Whenallfieldsaredefinedasyouwouldlike,clickFinish.YourfeatureclassiscreatedandaddedtotheSentinelGISgeodatabase.


Add New Fog Routes 1. StartArcMapbyclickingStart>AllPrograms>ArcGIS>ArcMap.2. Openyourexistingmap.3. AddtheFog_RoutelayerthatwascreatedinSection6.5bypressingtheAddDatabuttonand

browsingtoyourSentinelGISgeodatabase.IfyouusedtheCatalogwindowinsideArcMaptocreatetheFog_Routelayer,itwillalreadybeinyourmap.

4. Setsymbologyforthefogroutelayersothatitwillbevisibleonthemobiledevice.Forexample,thisfogroutelayerissettoaboldyellowandblackline.


6. Ifprompted,selectFog_Routelayertobeginediting,andpressOK.

42

7. IntheCreateFeaturespanel,clickonFogRoute.

8. DrawintheshapeoftheFogRouteasasinglecontinuouslinefeature.Toaccomplishthis,clickeachlocationonthemapwhereyouwouldliketoaddavertex.Snappingtipsdisplayasyoudrawthefeature.Thesketchdisplaysyourfeatureinprogress.(Formoreinformationoneditingfeatures,seetheArcMapHelpIndex,underthesubject“Editing,creatingsketches.”)PleaseNote:Itisfineforthelinerepresentingthefogroutetocrossitself.However,eachseparateFogRoutemusthaveauniquename.ThismeansyoucannothavemorethanonelinefeatureforasingleFogRoute.

9. Double-clicktofinishthefeatureorright-clickandselectFinishSketch.10. PresstheAttributesbuttonontheEditortoolbar.

11. Enterattributesthenclosetheattributeswindow.PleaseNote:Theroutenamemustbeunique.Adulticidingwillcheckforthiswhenyouextractdata.

43

12. ContinueaddingadditionalfogroutesusingthestandardEditortools.Whenfinished,clickEditor>StopEditing.


14. Topreparedataformobiledevice,clickAdulticidingthenselectExtractMapDataforMobileDevice(s).NexttimemobiledevicesareconnectedtoDataLinkGIStheywillbeupdatedwithnewlycreatedFogRoutes.

Create a No Spray Zone Layer Ifanosprayzonelayerdoesnotalreadyexist,standardArcGISDesktopeditingtoolscanbeusedtocreateone.Briefinstructionsforcreatingandeditinganosprayzonelayerarecontainedhere.


Nosprayzonesdonothavetobeused,butiftheyare,themobileapplicationwillprovideawarningwhentheGPSpositioniswithintheconfiguredwarningdistanceofanosprayzone.Thesprayerwillnotbeautomaticallyturnedoff;thedrivermuststillcontrolthesprayer.

1. StartArcCatalogbygoingtoStart>AllPrograms>ArcGIS>ArcCatalog,orbyclickingontheCatalogbuttoninArcMap

2. BrowsetothelocationoftheSentinelGISgeodatabase.Bydefault,thisisc:\DataLinkGIS\MergedFiles.

44


4. Enterthefeatureclassname,e.g.‘No_Spray’ThetypeoffeaturesstoredwillbePolygonFeatures.DonotspecifyMorZvaluestobestored.PressNext.

45



7. Selectthe‘Fogger_Log’featureclassandpressAdd.8. Noticethatthecoordinatesystemofthenewfeatureclassisnowthesameastheotherfeature

classesinyourgeodatabase.Inthisexample,thecoordinatesystemisUSStatePlaneNAD1983,TexasNorthCentral.ClickNext.

9. ForXYTolerance,acceptthedefaultvaluesandpressNext.PressNextonthenextpanelalso(configurationkeyword).

46

10. Onthefinalpanel,defineadditionalfieldsinthefeatureclasstable.ObjectIDandShapeareautomaticallycreated.Anyadditionalfieldscanbeaddedaccordingtoyourpreference.

11. Whenallfieldsaredefinedasyouwouldlike,clickFinish.YourfeatureclassiscreatedandaddedtotheSentinelGISgeodatabase.


Add New No Spray Zones 1. StartArcMapbyclickingStart>AllPrograms>ArcGIS>ArcMap.2. Openyourexistingmap.3. AddtheNo_SpraylayerthatwascreatedinSection6.7bypressingtheAddDatabuttonand

browsingtoyourSentinelGISgeodatabase.IfyouusedtheCatalogwindowinsideArcMaptocreatetheNo_Spraylayer,itwillalreadybeinyourmap.

4. Setsymbologyforthenosprayzonelayersothatitwillbevisibleonthemobiledevice.Forexample,thisnosprayzonelayerissettoabrightredcolor,andinLayerProperties>Display,thetransparencyissetto30%.

47


6. Ifprompted,selectthepersonalorfilegeodatabasetobeginediting,andpressOK.

7. IntheCreateFeaturespanel,clickonNo_Spray.

48

8. Drawineachnosprayzoneasapolygonfeature.Toaccomplishthis,clickeachlocationonthemapwhereyouwouldliketoaddavertex.Snappingtipswilldisplayasyoudrawthefeature,andthesketchdisplaysyourfeatureinprogressaswellaswhatthefeaturewouldlooklikeifthesketchwerefinished.(Formoreinformationoneditingfeatures,seetheArcMapHelpIndex,underthesubject“Editing,creatingsketches.”)

9. Double-clicktofinishthefeature,orright-clickandselectFinishSketch.10. PresstheAttributesbuttonontheEditortoolbar.

11. Enterattributesthenclosetheattributeswindow.

12. ContinueaddingadditionalnosprayzonesusingthestandardEditortools.Whenfinished,clickEditor>StopEditing.

49


14. Topreparedataformobiledevice,clickAdulticidingthenselectExtractMapDataforMobileDevice(s).NexttimemobiledevicesareconnectedtoDataLinkGIStheywillbeupdatedwithnewlycreatedNoSprayZones.

Extract Data Extractdataafterthemapissetupandsavedthewayyouwouldlike.Youdonothavetoextractdataeachtimeyouconnecthandhelddevices.Ifyouaddnewlayerstothemap,ormakesymbologychanges,youshouldextractagain.IfyoucollectnewSentineldata,itwillautomaticallybeextractedforsendingtothehandheldswhenDataLinkMergeruns.

1. ClicktheAdulticidingdrop-downandselectExtractMapDataforMobileDevice(s).

2. SelectwhichlayerstoextractasbackgroundlayersthenpressOK.AllAdulticidinglayersarecreatedonthemobiledevicewhentheprogramisrun.

50

3. Thefollowingactionstakeplace:a. SDEconnectiondetailsarerequested,ifusingSDEandrunningExtractforthefirsttimeb. TheFoggerLogandFoggerLogLinelayerswillbeaddedtothemap,iftheyaren’t

alreadypresent.c. Thefullextentofallselectedvector(point,line,polygon)dataintheactivedataframe

willbeextractedandplacedintheDataLinkGISTransmitdirectory(typicallyc:\ProgramFiles\DataLinkGIS\Transmit\AdulticidingData\All\SendOnly\).PleaseNote:RasterdataisnotextractedforuseinthemobiledevicedueinparttofilesizelimitationsforMrSIDencoding,andperformanceandstoragelimitationsonmanymobiledevices.Itispossibletouserasterfileswiththemobileapplicationsthough.Forinstructions,pleaseseetheSupportNotefromElectronicDataSolutions.Alsonotethatthefullextentofallvectordataisextracted,regardlessofzoomextentandlayervisibility.

d. ASend-OnlyfilelistwillbecreatedforDataLinkGIS.Allvectordatathatisextractedisaddedtothislist.FilesonthislistwillnotbereceivedbyDataLinkGISafterdataiscollectedinthefield.WhenDataLinkGISsendsfilestothemobiledevice,itwillonlysendfilesonthislistifthedataonthePCisnewerthanthedataonthemobile.

e. AnArcPad.apmfileisautomaticallycreatedthatreferencesallofthemapdata.Allsymbology,labeling,andfieldvisibilitysettingswillberetainedintheArcPadmap.

f. Ifitdoesnotexistalready,aSentinelGISgeodatabasewillbecreatedintheDataLink\MergedFiles\directory.Thiswillbeafilegeodatabaseifthatoptionwasspecifiedduringtheinstallprocess.Thisgeodatabasewillcontain3featureclasses:FoggerLog(point),FoggerLogLine(line),andFoggerSprayLine(line).ItwillalsocontaintablesanddomainsforActivity,Assignment,Chemical,Equipment,Fogger_Log_Relate,MixAgents,andMixRates.PleaseNote:Thefeatureclassesinthisgeodatabasewillassumethesamespatialreferenceasthedataframe.

g. Youwillbenotifiedifdatawassuccessfullyextracted.PressOK.

51

3. Ifyouhavenotalreadydoneso,youwillbepromptedtosaveyourArcMapMXDfile(yourmapdocument).

4. ChoosealocationforyourArcMapDocument(.mxd),enteraFilename,andpressSave.

Synchronizing Data With Mobile Devices DataLinkGISsynchronizesmapdata,surveyrecords,Sentinelprogramfilesandconfigurationfileswithallrecognizedmobiledevices.

Receive Files DataLinkGISisusuallyconfiguredtoautomaticallyreceive(andarchive,thenclear)datafilesfromthehandheldswheneveroneisconnected.(SeetheConfigurationsectionofthismanual,under‘DataLinkGIS.’)Ifthisoptionisnotturnedon,itcanbemanuallyperformedinDataLinkGIS.

1. PresstheReceivebuttoninDataLinkGIS.

Merge DataLinkGISisusuallyconfiguredtoautomaticallymergedataassoonasitisdownloadedfromahandheld.TheMergeprocessmanagestransactionswiththegeodatabase,pushingnewandmodifieddataintoit,andextractingupdatedinformationfromit.AlldatathathasbeenreceivedfromhandheldsisevaluatedbytheMergeprocess,mergedtothegeodatabase,andarchived.UpdatedinformationisextractedfromthegeodatabasetotheDataLinkTransmitdirectory.

Ifanyerrorsareencounteredwhilemergingdata,theprogramwillreporttheproblem,movetheoffendingdatatotheconfiguredDataLinkGIS\Errorsfolder,andcontinueprocessingremainingdata.

52

TheDataLinkMergeErrorsprogramwilllistthelocationofanyproblemfilesandthereasonfortheerror.

ThisprogramcanberunmanuallyatanytimebypressingtheMergebuttoninDataLinkGIS.

DataLinkMergecanalsobeconfiguredtorunataspecifictime,ratherthaneachtimedataisreceivedfromahandheld.(SeetheConfigurationsection>DataLinkGISOptions.)DataLinkGISmustberunningatthespecifiedtimeinorderfortheMergeprocesstorunsuccessfully.

Send Files DataLinkGISisusuallyconfiguredtoautomaticallysendfiles,afterithasreceivedanynewdatafromahandheldandsuccessfullymergedit.Ifthisoptionisturnedoff,datacanbesentmanuallyinDataLinkGIS.

1. PresstheSendFilesbuttontotransfertheGISdata,picklists,surveys,programfilesandconfigurationsettingstoyourconnectedmobiledevice.Caution:ifmapdata,includingSentineldata,isneweronthedesktopthanitisonthehandheld,handhelddatawillbeoverwritten.

53

Mobile Operation Beforebeginningtousethemobileapplication,setthecorrectDateandTimeonthemobiledevicebytappingStart>Settings>Systemtab>Clock.Manyfieldoperationsaredate-stampedortime-stampedautomaticallybasedonwhateverissetinthesystemclock.Thesystemdateandtimearesetpriortoyourequipmentshippingtoyou,butmayneedtobesetagainifthedeviceisfactoryreset,orrepaired.

User Interface

Main Toolbar

1. ZoomIntool.Clickthetool,thentapanddragadiagonallineonthemap.AZoomboxwilldisplayuntilyoureleasethetap/dragmotion.Afterreleasing,themapwillzoominontheextentyouselected.

a. Submenu:FixedZoomIn.Selectthisbuttontozoominonthecenterofthemap.

2. ZoomOuttool.Clickthetool,thentapanddragadiagonallineonthemap.AZoomboxwilldisplayuntilyoureleasethetap/dragmotion.Thelargerthebox,thefartheroutthemapwillzoomafteryourelease.

a. Submenu:FixedZoomOut.Selectthisbuttontozoomoutfromthecenterofthemap.

3. ZoomFullExtent.Tapthebuttontozoomtothefullextentofthemap.a. Submenu:Pan,GoBacktoPreviousExtent,GotoNextExtent

i. Pan:Clickthetool,thentapanddragthemaptomoveitaroundinanydirection.

ii. GoBacktoPreviousExtent:tapthebuttontogoback.

54

iii. GotoNextExtent:tapthebuttontogoforward.

4. ZoomtoFogRoute.ThisbuttonopenstheZoomtoRoutescreen.SelecttheroutetozoomtoandpressZoom.ItisonlyenabledifafogroutelayerhasbeenconfiguredintheAdulticidingConfigurationUtility.

5. Zoom/TrackMyLocation.TapthisbuttontocenterthemaponyourGPSlocation.a. Submenu:GPSPreferences,GPSPositionWindow,RestartGPS,RotateMap,Clear

Rotation.i. GPSPreferences:TapthisbuttontochangeGPSPreferences.Thesechanges

willonlyapplytothecurrentsession,andwillberesetwhenSentinelisrestarted.(SeetheSentinelGISInstallationGuideformoreinformationaboutGPSPreferences,andchangingGPSsettingspermanentlyforallhandhelds.)

ii. GPSPositionWindow:TapthisbuttontoopenArcPad’sGPSSkyplotandotherinformationscreenstoviewGPSstatusandquality.

iii. RestartGPS:Tapthisbuttontore-connecttotheGPSreceiver.iv. RotateMap:Tapthistool,thentapanddragonthemaptochangethemap

rotationtoadirectionotherthanNorth.v. ClearRotation:TapthisbuttontoresetthemaporientationtoNorth.

55

6. Identify.Tapthistool,thentapsprayfeaturesonthemaptobringupadditionalinformation.a. Submenu:Measure,RadialMeasure.

i. Measure:Tapthistool,thentaponthemaptoaddverticestoa‘measureline.’ThentaptheProceedbutton(greenarrow)toviewthemeasurement.

ii. RadialMeasure:Tapthistool,thentapanddragonthemaptodefinetheradiusofacircle.Whenyoureleasethetap/drag,measurementinfowilldisplay.

7. Refresh.Tapthisbuttontoredrawthemap.

Adulticiding Toolbar

1. Status.TaptoreturntotheStatus/Loggingscreen.

56

2. Stopactivity/session.Taptostopthecurrentactivityorsession.Youwillbepromptedtoconfirm.

3. Timeinactivity.Taptoverifythelengthoftimeinthecurrentactivity.

4. Exit.Tapthisbuttontoexittheapplication.Thereisnoneedtosavebeforeexiting.a. Submenu:AboutSentinelGIS.Taptoviewversioninformation.

Create Spray Sessions

1. TapStart>SentinelGIS.

2. AllinstalledSentinelGISmoduleswillbedisplayedinthedrop-downlistofapplications.Onlyonecanberunatatime.SelecttheSentinelGISAdulticidingapplicationandpressStart.

57

3. Thefirstscreentoappearisasplashscreen,whichappearsforafewmomentsthenautomaticallygoestothenextscreen.TappingtheOKorXbuttonwillskipthepauseandproceeddirectlytothenextscreen.

4. Next,theLogSessionDetailsscreenappears.SelecttheUserName,Activity,andTruckID.IftheActivityis‘Fogging’selecttheChemical.Iffogroutesareconfigured,selecttheFogRoute.OptionallyentertheTemp,WindSpeedandDir.Mostdrop-downlistsarecreatedintheAdulticidingConfigurationUtility,withtheexceptionofWindDirection,whichispre-configured.

58

a. UserName(required)–selectyourusernamefromthedrop-downlist.Someuserswillbeallowedtoviewthemapwhilefogging,andotherswillnot.ThisoptionisconfiguredintheAdulticidingConfigurationUtility.

b. Activity(required)–selectyouractivityfromthedrop-downlist.c. TruckID(required)–selectyourtruckIDfromthedrop-downlist.d. Chemical(requiredifActivityisFogging)–selectthechemicalfromthedrop-downlist.e. FogRoute(requiredifFogRouteLayerisconfigured)–selectthefogroutefromthe

drop-downlist.ThelistcontainsthenamesofallfogroutesintheconfiguredFogRouteLayer.Iffogroutenamesseemtobemissing,checkthedatalayerforcompleteness,andmakesurecurrentdatahasbeenextractedforthemobiledevice.Iffogroutesareconfigured,butthecurrentsessionisnotonanexistingroute,selectthe‘MiscellaneousRoute’option.

f. Temp(F)(optional)–typeinthenumerictemperaturevalueg. WindSpeed(optional)–selectthewindspeedfromthedrop-downlist.h. WindDir(optional)–selectthewinddirectionfromthedrop-downlist.i. Ifthe“ReadweatherdatafromNewMountainweatherstation”optionisenabled,

weatherdatawillbecollectedsecondbysecondwiththesprayerdata,soweatherinformationishiddenontheloginscreen.

Ø Connecttheweatherstationusingthe‘pigtail’cablewiththe9-pinRS-232serialconnector.NOTE:thiscablecomeswitha12-voltACwalladapter.Youmayneedtogetavehiclepoweradapterinstead.A12-voltvehicleadapterwithanM-sized(2.1mmx5.5mm)barrelplugcanbepurchasedfromelectronicsstoressuchasRadioShack.Alsonotthatifaserialcableextension

59

mustbeused,aM-FstraightthroughcablecanbepurchasedfromElectronicDataSolutions.

Ø ConnectaBluetoothSerialAdaptertothe9-pinportØ TurnontheBluetoothSerialAdapterandmakesureitisin“Discoverable”

modeØ SetupyourmobiledeviceBluetoothconnectionandmakeanoteoftheCOM

portØ ConfiguretheCOMportsettingfortheweathersensorintheAdulticiding

ConfigurationUtility

Ø IftheCOMportsettingisdifferentonthisparticulardevice,tapintheblankspacenexttotheLogInbuttontobringupanOptionswindow.Uncheck“Usedefaults”andselecttherightCOMport.

j. IfCustomfieldsaredefined,tapontheCustomtabandenterdata.Optionally,tapontheNotestabandenternotesfromthe“hotlist”ortypeinnotesasdesired.

60

5. TapLogIntostarttheActivity.

Fogging 1. IftheActivityselectedis‘Fogging’theStatus/Loggingscreendisplays.Thisscreenshows:

- FoggerStatusØ FOGONwithgreenbackground.Dataisbeingreadfromthecontrolbox,andthepump

switchisturnedon.Ø NOFOGwithredbackground.Dataisbeingreadfromthecontrolbox,andthepump

switchisturnedoff.

61

Ø OFFROUTEwithyellowbackground.Dataisbeingreadfromthecontrolbox,andthecurrentGPSpositionofthePhoenixcontrollerismorethanthespecifiedwarningdistanceawayfromtheselectedfogroute.Thismessagewillalternateblueandwhite,andwillbeaccompaniedbyawarningsound.ThewarningdistanceandsoundareconfiguredintheAdulticidingConfigurationUtility.

Ø NOSPRAYwithyellowbackground.Dataisbeingreadfromthecontrolbox,andthecurrentGPSpositionofthePhoenixcontrollerislessthanthespecifiedwarningdistanceawayfromanosprayzone.Thismessagewillalternateredandwhite,andwillbeaccompaniedbyawarningsound.ThewarningdistanceandsoundareconfiguredintheAdulticidingConfigurationUtility.IftheGPSpositionisbothoffrouteandinanosprayzone,thenosprayzonewarningtakesprecedence,andtheoffroutewarningwillnotdisplayuntilyouareoutofanosprayzone.

- CurrentSpeed- PumpFlowRate- ConnectionStatus

Ø GOOD.Dataisbeingreadfromthecontrolbox,orweatherstation

Ø BAD.Nodataisbeingreadfromthecontrolbox,orweatherstation.Checkcableconnectionsandcontrolboxstatus.PleaseNote:Onlya9-pinFemale-FemaleNullModemcableshouldbeusedtoconnectthemobiledevicetothecontrolbox.Otherserialcablesmayphysicallyconnect,butonlyaNullModemcablewillsuccessfullytransmitdata.Toobtainreplacementnullmodemcables,contactElectronicDataSolutionsat(208)324-8006.

- CommandButtonsØ ViewMap.Ifthespeedis0andthefogswitchisoff,allusersmayviewthemap.Ifthe

fogswitchisonorthespeedishigherthan0,onlyuserswithmapviewingpermissionsmayviewthemap(seeSection10.1).Userswithoutmapviewingpermissionswillberemindedtostopthevehicleandturnoffthepumpswitch.

62

Ø EndSession.Clicktoendthecurrentsession.Youwillbeaskedtoconfirm.TheOKand

Xbuttonswillalsoresultinthesameprompt.

2. Ifafogsessionisended,asummaryofthecurrentfogsessiondisplays,includingthestartandendtime,andtotaltimespentonthecurrentsession.YoucanenteradditionalinformationontheCustomtabifenabled,orNotes.

- CommandButtonsØ StartNewSession.Clicktostartanewfogsession,orotheractivity.TheSession

Detailsscreenappears.Ø LogOff.Clicktoexittheapplication.Youwillbeaskedtoconfirm.

63

Proximity Checking (Fogging)

ThemobileapplicationcheckstoensurethatincomingGPScoordinatesarewithinareasonabledistanceofthelastvalidposition.Ifnot,thelastvalidpositionisused,untilanotherincomingcoordinateevaluatesas‘good.’Thefollowingparametersareemployedbydefaultintheapplet,andcanbeentered/changedintheSentinelGIS.configfileforAdulticiding(\ProgramFiles\DataLinkGIS\Hand-HeldSoftware\Applets\MobileApps\Adulticiding).

ProxLowSpeedThreshold=2 'Ifspeedgoesbelowthis(mph),useProxLowSpeedMaxDistanceasmaxproximity

ProxLowSpeedMaxDistance=10'Infeet(note:ProxAdditionwillstillbeadded)

ProxMaxPointsSkipped=5 'Maxpointsskippedbeforereconsideringgoodpoint

ProxMaxTimeSkipped=5 'Maxtime(seconds)beforereconsideringgoodpoint

ProxMultiplier=1.5 'errormultiplieronproximitydistance

ProxAddition=30 'erroradditiontoproximitydistance

ProxLogDebug="true" 'Iftrue,proxcheckingdebugwillbesenttoproximity.logindatapath

Other Activities

1. Totracktimespentonallactivities,startasessionandselectanactivityfromthedrop-down.

2. Iftheactivityselectedwhenlogginginisanythingexcept‘Fogging,’theMapwilldisplay.TheGPSlocationandspeedwillberecordedforeveryactivity.

64

3. TocenterthemaponthecurrentGPSlocation,clickZoom/TrackMyLocation.

4. Tocheckhowmuchtimehasbeenspentinthecurrentactivity,clicktheclockiconintheSentinelGIStoolbar.

AnActivitydialogdisplays,showingthecurrentactivity,andtotaltimespentsofar.

5. ClicktheStatusbuttontoreturntotheStatus/Loggingscreen,whereyourcurrentspeedandstatuscanbeviewed.

6. ClicktheStopbuttontoendthecurrentactivity.

Youwillbeaskedtoconfirmthisaction.

7. Ifthefoggercontrolboxisconnected,andthefogswitchisturnedon,theuserisinformedthattheymustendthecurrentactivityandstartafogsession.

65

8. Ifanactivityisended,asummarydisplays,includingthestartandendtime,andthetotaltimespentontheactivity.Justaswhenafogsessionisended,anewsession/activitycanbestarted,ortheusercanlogoff.

Analysis & Reporting

Viewing and Reporting on Field Data Sprayerdatawilldisplayonthemap,showingthespraylinesandthesecond-by-second‘breadcrumbtrail’(Fogger_Log).

TheFogger_Logsymbologyshowswhetherthesprayerwasonoroff.

TofindoutdetailsforanindividualFoggerLogpoint,clicktheIdentifytool.

ClickonaFoggerLogpoint,anditsinformationwilldisplayintheArcMapIdentifywindow.Thelocation,speed,flowrate,andstatusandtimearestoredwiththeFoggerLogpoints.Therelatedspraysessiondetailssuchasthedate,truck,chemical,sprayer,arestoredintheFogger_Log_Relate.Expandthe+symboltoviewthosedetails.

66

Using the Map View Filter Bydefaultallfoggerdatawilldisplayonthemap.Ifyouwouldliketoviewonlyfoggerdatathatmeetscertaincriteria,youcanusetheFilterFoggerData/MapViewtool.

1. ClicktheAdulticidingdrop-downthenclickFilterFoggerData/MapView.

2. SelectcriteriafortheFilter,includingdaterange,fogarea,fogroute,user,truck,equipment,orchemicalused.PressApplyFilter,thenclosethewindow.

67

3. Onlydatathatmeetsthefiltercriteriawilldisplayonthemap.4. Toclearthefilter(andthereforeviewalldata),clicktheAdulticidingdrop-down,thenclickClear

FoggerData/MapViewFilter.

68

Using the Data Utilities TheDataUtilitiesoptioncontainsautilityforimportingAdapcoMonitorIVdata.

1. ClicktheAdulticidingdrop-downthenclickDataUtilities.

2. SelecttheAdapcoDataImportthenpressRunSelectedUtility.

69

3. PressSelectFilestoImportandbrowsetothetextfile(s)fromtheMonitorIV.

4. Thefileswillbeginprocessingimmediately.Anyerrorsorproblemswithimportingthefileswill

berecordedinthelogfiles.

70

Create Reports Reportsshowspraysessionoractivitydetails.Therearethreereportsavailable.

Spray Session Detail Report Displaysspraysessiondetails,groupedbyfogarea,date,anddriver.Detailsincludetruck,equipment,chemical,areatreated,andtotalvolume.

Spray Session Detail With Map Report Displaysthesamedetailsasabovebutwithamap.Themapextentisthefullextentofthedatathatisselectedinthefilters.

Spray Session Summary Report Displaysasummaryofareatreatedandtotalvolumeperchemical.

Report Criteria

Filter by Date Range Specifythedaterangeforthereport.Ifnodatefilterisset,alldateswillbeincluded.

71

Other Filters Reportdatacanbefilteredbysprayarea,sprayroute,driver,vehicle,equipment,orchemical.

Report Subtitle Optionallytypeasubtitle.

Activity Report Displaysnon-foggingactivitydetails,groupedbyfogarea,date,anddriver.

Report Criteria

Filter by Date Range Specifythedaterangeforthereport.Ifnodatefilterisset,alldateswillbeincluded.

Other Filters Reportdatacanbefilteredbydriver,equipment,orvehicle.

Report Subtitle Optionallytypeasubtitle.

72

Print & Export Reports Thesestandardreportscanbeprinted,orexportedtootherformats,includingExcel,Word,andPDF.

1. Toprinttheresults,pressthePrintReportbutton.

2. Toexporttheresults,presstheExportReportbutton.

1541stAvenueWest,Jerome,ID83338

Ph:208-324-8006http://www.frontierprecision.com

Copyright © 2017 by Frontier Precision, Inc. All rights reserved worldwide. All other trademarks are registered or recognized trademarks of their

respective owners. Trademarks provided under license from Esri.