advanced filtration systems for lubricating and fluid power ......for lubricating and fluid power...

Depotvej 3 . DK 4700 Naestved . Denmark Phone +45 55 70 06 99 . Fax: +45 55 70 08 40 . [email protected]

www.marinetechnic.com

Model FP1105Portable filtration system – 680 LPH

Advanced filtration systems for lubricating and fluid power applications

Maintains Fluids Within Aerospace SpecificationsEliminating Varnish, Sludge, Water,

and Particulate Contamination

Reduce Maintance and extendequipment life

Reducing your cost today toincrease your profits tomorrow

Model FP2108Portable filtration system – 1.360 LPH

Model FP10501-WFiltration system – 158 LPH

Part Cleaners Improve the working enviroment on board your ship




Applications

Hydraulic Oils • Compressor OilsGear Oil Synthetic Lubricants • Phosphate Ester Fluids

Insulating Oils • Turbine Oil • Water Glycols



Model FP1105 Portable fi ltration system

Portable Filtration System Model FP1105

Applications

Hydraulic Oils • Compressor Oils Gear Oil Synthetic Lubricants • Phosphate Ester Fluids


Specifi cations• 1/2 HP TEFC heavy duty motor with thermal overload protection.

• 19 LPM positive displacement gear pump with internal relief valve.

• One (1) polyurethane powder baked F-1000 element housing.

• Wired 110 Volt or 220 Volt, 1 phase with all electrical components mounted in a NEMA 4 enclosure.

• Starter switch with automatic/manual override circuit.

• Automatic high/low pressure shutdown system for unattended operation.

• 0-100 PSI glycerin fi lled gauge for monitoring system pressure.

• Plumbed with all brass fi ttings and 1/2” industrial hydraulic hose.

• 1/2” Inlet and outlet ball valves provided to isolate unit for element change.

• Two (2) 4,5 m-1/2” inlet and outlet hydraulic hoses with hose ends.

• 4,5 m of heavy duty 12/3 power cable.

• Manufactured with 3-way ball valve for fl uid transfer system and to allow for adding makeup oil.

• Suction-Wye strainer to protect pump from large debris.

• Heavy duty 10” pneumatic tires.

• Filtration capacity of 11 LPM and fl uid transfer capacity of 19 LPM.

567 LPH



MODEL FP1105P

Filmax is the industry leader in the application of filtration technology specializing in Advanced Filtration Systems for Fluid Power Applications, Mobile and Stationary Engines. Filmax holds the most recent patents for specific advancements in oil filtration technology, which allows the company to manufacture the finest oil filtration equipment in the industry. We at Filmax are committed and dedicated to providing the highest standard of customer service and technical support in the industry.

Filmax, Inc./Resource Recovery Systems,

Portable Advanced Filtration Systemsfor Lubricating and Fluid Power Applications

150 GPH

508 mm

MODEL FP1105P




150 GPH

635 mm

1168 mm



Model FP1105 Portable fi ltration system


Applications

Hydraulic Oils • Compressor Oils Gear Oil Synthetic Lubricants • Phosphate Ester Fluids


Specifi cations• 1/2 HP TEFC heavy duty motor with thermal overload protection.

• 19 LPM positive displacement gear pump with internal relief valve.


• Wired 110 Volt or 220 Volt, 1 phase with all electrical components mounted in a NEMA 4 enclosure.

• Starter switch with automatic/manual override circuit.

• Automatic high/low pressure shutdown system for unattended operation.


• Plumbed with all brass fi ttings and 1/2” industrial hydraulic hose.

• 1/2” Inlet and outlet ball valves provided to isolate unit for element change.

• Two (2) 4,5 m-1/2” inlet and outlet hydraulic hoses with hose ends.

• 4,5 m of heavy duty 12/3 power cable.

• Manufactured with 3-way ball valve for fl uid transfer system and to allow for adding makeup oil.

• Suction-Wye strainer to protect pump from large debris.

• Heavy duty 10” pneumatic tires.

• Filtration capacity of 11 LPM and fl uid transfer capacity of 19 LPM.

567 LPH



MODEL FP1105P




150 GPH

508 mm

MODEL FP1105P




150 GPH

635 mm

1168 mm

Model FP1105Portable filtration system – 680 LPH

Specifications• 1/2 HP TEFC heavy duty motor with thermal overload protection.• 19 LPM positive displacement gear pump with internal relief valve.• One (1) polyurethane powder baked F-1000 element housing.• Wired 110 Volt or 220 Volt, 1 phase with all electrical components mounted in a NEMA 4 enclosure.• Starter switch with automatic/manual override circuit.• Automatic high/low pressure shutdown system for unattended operation.• 0-100 PSI glycerin filled gauge for monitoring system pressure.• Plumbed with all brass fittings and 1/2” industrial hydraulic hose.• 1/2” Inlet and outlet ball valves provided to isolate unit for element change.• Two (2) 4,5 m-1/2” inlet and outlet hydraulic hoses with hose ends.• 4,5 m of heavy duty 12/3 power cable.• Manufactured with 3-way ball valve for fluid transfer system and to allow for adding makeup oil.• Suction-Wye strainer to protect pump from large debris.• Heavy duty 10” pneumatic tires.• Filtration capacity of 11 LPM and fluid transfer capacity of 19 LPM.

Model FP10501-W Portable fi ltration system

Portable Filtration System Model FP10501-W

Applications

Hydraulic Oils • Compressor Oils Gear Oil • Synthetic Lubricants • Phosphate Ester Fluids


• Compact wall mount design for all small industrial fl uid applications.

• Element holding capacity of up to 230 gram of particulate contamination and up to 1.6 L. of water.

• Filtration capacity of 11 to 26 LPM with a maximum viscosity of ISO 320 fl uid.

• Filmax Filtration Elements provide superior performance with a Beta Rating of B5=500 and B3=150.

1.135 LPH

This Diagram Is The Confidential Information Of Filmax Inc., A Division Of R.R.S. Inc.

FILMAXTM MODEL FP10501-W SPECIFICATIONS

¼ HP TEFC heavy duty motor, 60 HZ, 3 phase, 440 VAC

1 GPM positive displacement gear pump with internal relief valve

One (1) polyurethane powder baked F-500 element housing

Wired 440 volt, three phase with manual motor starter

0-100 PSI glycerin filled gauge for monitoring system pressure

Plumbed with all brass fitting and ½” industrial hydraulic hose

Compact wall mount design for all small industrial fluid applications

Element holding capacity of up to 230 gram of particulate contamination and up to 52 ounces of water

Filtration capacity of .3 to .7 gpm with a maximum viscosity of ISO 320 fluid

Filmax Filtration Elements provide superior performance with a Beta Rating of B5=500 and B3=150

610 mm508 mm

229 mm

470 mm



Specifi cations• ¼ HP TEFC heavy duty motor, 60 HZ, 3 phase, 440 VAC.

• 3,8 LPM positive displacement gear pump with internal relief valve.


• Wired 440 volt, three phase with manual motor starter.


• Plumbed with all brass fi tting and ½” industrial hydraulic hose.

Specifications• . HP TEFC heavy duty motor, 60 HZ, 3 phase, 440 VAC.• 3,8 LPM positive displacement gear pump with internal relief valve.• One (1) polyurethane powder baked F-500 element housing.• Wired 440 volt, three phase with manual motor starter.• 0-100 PSI glycerin filled gauge for monitoring system pressure.• Plumbed with all brass fitting and .” industrial hydraulic hose.• Compact wall mount design for all small industrial fluid applications.• Element holding capacity of up to 230 gram of particulate contamination and

up to 1.5 L. of water.• Filtration capacity of 11 to 26 LPM with a maximum viscosity of ISO 320 fl uid.• Filmax Filtration Elements provide superior performance with a Beta Rating of

B5=500 and B3=150.

Specifications• 3/4 HP TEFC Heavy Duty Motor with Thermal Overload Protection.• 30 LPM Positive Displacement Gear Pump with Internal Relief Valve.• Two (2) Polyurethane Powder Baked F-1000 Element Housings.• Wired 110 Volt or 220 Volt, 1 Phase with all electrical components

mounted in a NEMA 4 enclosure.• Automatic High/Low Pressure Shutdown System for unattended

operation.• 0-100 PSI Glycerin Filled Guage for monitoring system pressure.• Plumbed with 3/4” fittings and 1” stainless steel tubing.• 3/4” inlet and 3/4” outlet with ball valves provided to isolate unit for

element change.• Two (2) 3 m. 3/4” inlet and outlet hydraulic hosaes with hose ends.• 9 m. of Heavy Duty 12/3 Power Cable.• Manufactured with 3-way ball valve for Fluid Transfer System and

to allow for adding makeup oil.• Suction-Wye Strainer to protect pump from large debris.• Heavy-Duty 10” Pneumatic Tires.• Filtration Capacity of 24 LPM and Fluid Transfer Capacity of 30 LPM.

Model FP10501-WFiltration system – 158 LPH

Model FP2108Portable filtration system – 1.360 LPH

Model FP2108 Portable filtration system


Applications



Specifications• 3/4 HP TEFC Heavy Duty Motor with Thermal Overload Protection.

• 30 LPM Positive Displacement Gear Pump with Internal Relief Valve.

• Two (2) Polyurethane Powder Baked F-1000 Element Housings.

• Wired 110 Volt or 220 Volt, 1 Phase with all electrical components mounted in a NEMA 4 enclosure.

• Automatic High/Low Pressure Shutdown System for unattended operation.

• 0-100 PSI Glycerin Filled Guage for monitoring system pressure.

• Plumbed with 3/4” fittings and 1” stainless steel tubing.

• 3/4” inlet and 3/4” outlet with ball valves provided to isolate unit for element change.

• Two (2) 3 m. 3/4” inlet and outlet hydraulic hoses with hose ends.

• 9 m. of Heavy Duty 12/3 Power Cable.

• Manufactured with 3-way ball valve for Fluid Transfer System and to allow for adding makeup oil.

• Suction-Wye Strainer to protect pump from large debris.

• Heavy-Duty 10” Pneumatic Tires.

• Filtration Capacity of 24 LPM and Fluid Transfer Capacity of 30 LPM.

1.135 LPHMODEL FP2108P




300 GPH

45”

559 mm

1.143 mm

MODEL FP2108P




300 GPH

610 mm



Model FP2108 Portable filtration system


Applications



Specifications• 3/4 HP TEFC Heavy Duty Motor with Thermal Overload Protection.

• 30 LPM Positive Displacement Gear Pump with Internal Relief Valve.

• Two (2) Polyurethane Powder Baked F-1000 Element Housings.

• Wired 110 Volt or 220 Volt, 1 Phase with all electrical components mounted in a NEMA 4 enclosure.

• Automatic High/Low Pressure Shutdown System for unattended operation.

• 0-100 PSI Glycerin Filled Guage for monitoring system pressure.

• Plumbed with 3/4” fittings and 1” stainless steel tubing.

• 3/4” inlet and 3/4” outlet with ball valves provided to isolate unit for element change.

• Two (2) 3 m. 3/4” inlet and outlet hydraulic hoses with hose ends.

• 9 m. of Heavy Duty 12/3 Power Cable.

• Manufactured with 3-way ball valve for Fluid Transfer System and to allow for adding makeup oil.

• Suction-Wye Strainer to protect pump from large debris.

• Heavy-Duty 10” Pneumatic Tires.

• Filtration Capacity of 24 LPM and Fluid Transfer Capacity of 30 LPM.

1.135 LPHMODEL FP2108P




300 GPH

45”

559 mm

1.143 mm

MODEL FP2108P




300 GPH

610 mm



Advanced filtration systems for lubricating and fluid power applications

advanced filtration systems for lubricating and fluid power ......for lubricating and fluid power...

Documents