ae board recalled questions part 1 in farm machinery and allied subjects.pdf

AGRICULTURAL ENGINEERING RECALLED BOARD EXAM QUESTIONS 2013

AREA 1 Agricultural Machinery ,Agricultural Power and Allied Subjects

MLR 2013 Page 1

Monday, 2 PM to 6 PM, August 26, 2013

RA 8559 AE LAW

1. What is the value of the diameter of the seal of a registered Agricultural Engineer which inscribed by a

circle.meron ganitong question din nung 2012

Answer: 42mm

2. What Agency , department or institution support the implementation of RA no 8559 particularly in

enforcing section 21 thereof relative to the use of seal and other functions and responsibilities of a duly

registered agricultural engineer. meron ding ganitong tanong nung 2012.

Answer: LGU or Local Government Units

3. Penalties..for Administrative sanctions imposed under RA 8559,any person who violates any of the

provisions of this act shall

Answer: upon conviction, be penalized by a fine not less than fifty thousand pesos(50,000) nor more

than two hundred thousand pesos(200,000) or imprisonment of not less than six (6) months nor more

than three(3) years, or both fine and imprisonment at the discretion of the court.

4. What will be the penalty of an agricultural engineer or foreign AE allowed to practice agricultural

engineering in the Philippines if he is found to have committed any of the ff.

a. use or perpetuation of any fraud or deceit in obtaining a certificate of registration

b. Incompetence

c. Negligence

d. Abetting the illegal practice of agricultural engineering and

e. Violations of any provisions of RA 8559, its implementing rules and regulations,code of ethics and

professional standards for agricultural engineers, and the policies adopted by the board.

Answer: Grounds for the revocation or Suspension of Professional License

5. My tanong din about s kung anung PD section yata or taon na implement na ang maghahandle s Farm to

market road is Agricultural engineers.basta my ganyang tanong dko lang sure ung exact words at sentence

na ginamit.

Answer: dko sure ung exact number pero ngbase na lang k sa taon which is 2009 nagawa ang PAES

standard ng FMR..basta read read, hanggat kaya nyong mgbasa,at malinaw pa mga mata nyo eh, basa

basa lang pag my time,,,,

End Notes: Bale yan lang ang kaya kng imemorize .mahaba haba kasi mga tanong..Review nyo ang RA

8559.dyan halos kinuha ang 30% na tanong. Better read all related AE LAWS, para my idea po

kayo..

AE ROAD MAP

6. One of the objectives of AE Road map is To produce_________new registered and licensed

agricultural engineers in the next 8 years. Isang question lang binigay ditto .basahin nyo na lang po ung

AE ROAD MAP.

Answer: 10,000 registered and Licensed Agricultural Engineer



MLR 2013 Page 2

FARM Machinery , Farm Power

7. the space inside the cylinder when the piston is at top dead center position

Answer: Clearance Volume

8. Percentage of weeds removed/destroyed per unit area.hindi eto ung exact words dun sa binigay na

question,pero parang ganito na rin sya.

Answer: Weeding index, Weeding Efficiency

9. Crude oil content ???(choices hydro carbon, methane????,dko na alam ung iba,basta try nyo na lang

isearch,,

10. Recommended depth for Secondary implement is:

Answer: 3 to 6 inches

11. What type of model of mechanization does Philippines followed.?basta parang ganito ung tanong at

sagot.bahala na kau kung paniniwalaan nyo,hehe

Answer: Low land area to farmer ratio

12. Convert 1000 kg m/s to kw or hp yata un.basta my conversion na binigay..

13. Computation of piston displacement. Given the value of the diameter of the piston and the area..

14. Computation of compression ratio.. given the value of clearance volume, diameter and the area..

15. Computation of field capacity, theoretical and efficiency

16. Computation ng rated hp, pump power,(3 to 4 questions ) (given ung discharge capacity, height, efficiency ng

pump,given ung unit na m3per second at meter sa height). convert nyo na lang to hp

17. Computation of IHP(Indicated horsepower), given the value of indicated mean effective pressure, piston

stroke, piston area, number of power strokes per minute, number of cylinders.used this formula

PLANn,basta convert nyo n lang s HP yan..

18. Computation for Drawbar horsepower.given the value of the velocity or the speed of travel of the tractor

and the draft in psi,convert to hp..

19. Computation of Brake horsepower.Given the value of Mechanical efficiency, and IHP

20. Compute the weight of the seeds needed for the given value of revolution of the GW.given area, wheel slip,

wheel radius at given the value of rpm, wt. of seeds collected per seed tube, spacing bet row and the value

of the wheel rotation for a given time. Dko na maalala ung mga value nyan, pero my ganyang sample sa

recalled exam ng 2010. Kung meron kayo copy nun,try to compute na lang po.

21. Types of machine used from production.( more on function or type of machine used in the field operation)

22. Mga Terminologies sa farm machinery and Farm power, Postharvest, maraming question about dun, try to

read na lang ok..

End Notes: Read read read lang masasabi ko.basta yan lang din naalala k s part na yan,d bale madali

lang para sa inyo yan,kayang kaya nyo yan..



MLR 2013 Page 3

Engineering Economy, Marketing

23. (Monopolistic, oligopolistic. My ganitong mga choices, pero dko sure ung eksaktong tanong dyan,read

marketing na lang po.

24. (Trademark, brandname,,my ganitong mga choices din,ang naaalala k sa question is parang tawag sa name

or brand ng product(let say tag line ng product) na originally owned by that company,parang cla lang ang my

right to use or to sell that product or something like that,basta dko sure to ah,,,try to search na lang ibg

sabhin nyan para my idea kau,,

25. Terminologies sa marketing and engineering economy. Read Basic Concepts of agricultural Marketing

26. Computation of Present worth, Future worth,Compound interest.mga 2 to 3 question

Situational

Situational 1

Note ung value na binigay ko ay hindi eksakto sa question na binigay basta ngset lang ko ng sample

pero parang ganyan din

200, 000.00 = Cost for buying Production materials

300,000.00 = Cost for paying the tax and insurance of the company

500,000.00 = Cost for the training of the employees

400,000.00 = Cost for the salary ,incentives of the employees and other additional expenses of the

company

27. 200,000.00(cost for buying production materials) is what type of cost?

a. Fixed cost b. variable cost c. Incremental cost d. Overhead cost

28. 300,000.00(Cost for paying the tax and insurance of the company)


29. 500,000.00(Cost for the training of the employees)


30. 400,000.00(Cost for the salary ,incentives of the employees and other additional expenses of the company)


Fixed cost Costs which do not change regardless of the volume of production.

ex. Insurance and taxes on facilities,general administrative salaries,license fees, interest costs on a

given amount of borrowed capital

Variable cost those costs which vary with the volume of production

ex. The costs of material and labor used in a product.

Incremental cost refers to the additional costs or revenue that will result from increasing the output

of a system by one or more units. It is also referred to as marginal cost.

Overhead cost is often used to mean all expenditures that are not direct costs

End Notes:, oh anu sagot m dyan pili ka na,nilagay ko na lang mga definition ng mga yan,para kau na lang

pumili kung anu tamang sagot.ok lang b?



MLR 2013 Page 4

Situational 2

In the operation of internal combustion engines, four events repeatedly takes place inside the combustion

chamber one after the other in a definite order. These cycle of events are the following.hindi po eto ung

eksaktong tanong pero parang ganito po sya basta basahin nyo na lang mga meaning nya..

31. Air and fuel mixture enters the cylinder through the open intake port.hindi eto ung eksaktong words pero

parang ganyan din

a. Induction b. Compression c. Power d. Exhaust

32. The air-fuel mixture which have entered during the intake event is trapped into a small combustion

chamber


33. The air-fuel mixture is ignited resulting to a very rapid expansion of the burning mixture.


34. The burned gases are removed from the combustion chamber.


Situational 3

May ganitong tanong din sa Recalled question ng 2012..reminders..hindi po eto ung exact question,pero

parang ganito yung pagkakaintindi ko.intindihin nyo na lang...

It is about a Powerful Businessman,who own a big company that distribute and supply agricultural products

to different areas. Meron syang mga competitors so sabhin na lang natin na

Area 1 somewhere in Davao yata sya ay isang agri supply center na ng didistribute ng agri products directly

to the consumer.

Area2 Isang cooperatives na ngpapautang ng mga agri products sa mga member nyang farmers.

Area 3,isang small business man na bumibili ng mga agri products sa mga farmers at directly nya din etong

binibinta sa mga consumer with additional cost

35. That Powerful Businessman is

a. Merchant b. Dealer c. Intermediaries d. value added seller

36. Competitor in Area 1






End Notes: Read nyo na lang mga meaning ng mga yan,para sure kayo..

Situational 4

Computation,,Given the value of rpm ng engine at pulley and given ung value ng diameter ng engine at

diameter ng center ng engine and pulley,V belt ung materials.nakalimutan k na ung mga values kaya

pasensya(4 questions )

39. What is the value of the diameter of the pulley?

40. What is the value of rpm ng center ng pulley at engine?



MLR 2013 Page 5

41. What is the Belt Speed?

42. What is the Length of the V belt?

Situational 5

Farm Machinery.Computation. Given 50 hp, 5-25 cm width of implement, 5kph speed of the tractor.

43. Find the theoretical capacity?

44. Find the Actual field capacity?

45. Find the Field Efficiency?

46. Theoretically, What is the ideal number of operations in plowing using this given values?my kulang ditto na

words dko lang maalala..

Situational 6

About sa group ng farmers na my coconut production,parang member cla ng cooperatives na binigyan ng

loan.pero ang binigay is water pump tube wheel at 4 x 4 centrifugal pump yata,kaso hindi nila nagagamit ng

maayos, habang nandun s kanila ung equipment eh ngbabayad cla ng amortization yata or basta my

binabayaran cla parang interest,,my 4 questions )

47. Anung machine dapat ang gamitin nila sa kanilang farm?

a. Tractor b. hand tractor c. decorticating machine d.shredder

48. Anu ang pinakamagandang machine na dapat nilang gamitin?

a. water pump b. coconut decorticating machine c. shredder d.

49. Anu ang pinakamagandang gawin ng mga farmers para hindi masayang ung binabayad nila sa nagbigay sa kanila

ng loan?

a. convert ung machine para sa hauling or hand tractor

b. isauli na lang sa agency para hindi mgbayad

50. Saan dapat gagamitin ung water pump at centrifugal pump na binigay ng agency ?

a. Rice b. coconut c.vegetables d.Sugarcane

Situational 7

About windmill pump. Given 5 hectare, air density, power, speed velocity, power coefficient factor, pitch

diameter, capacity, at marami pang ibang given I forgot na eh. 4 questions din eto

51. Diameter ng propeller ng windmill (mm)?

52. Volume of water na pweding ipump ng windmill per year (litters)?

53. Number of hectare na pweding mapatubigan gamit ung windpump per day(hectare)?

54. Ilang units ng windpump ang dapat maiprovide para mapatubigan ang 5 hectare..?

EndNotes: Hanggang ditto na lang ang pwedi ko marecall.sa mga errors,paki tama na lang at kung my

maidagdag kayo paki share na lang,more more more on reading lang, kaya nyo yan,Godbless

TO GOD BE THE GLORY!!!!!!!!

ae board recalled questions part 1 in farm machinery and allied subjects.pdf

Documents