aero supplies - catalogue oil and greases - cross reference
DESCRIPTION
Aerospace GreasesTRANSCRIPT
505Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
OILS & GREASES
SPECIFICATIONS ROYAL LUBRICANTS SHELL CASTROL** B.P MOBIL**
MIL-PRF-3150D . . . . . . . . . . .ROYCO 315 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BRAYCO 530 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-G-3545* . . . . . . . . . . . . . .ROYCO 45 . . . . . . . . . . . . . .ASG 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-G-4343 . . . . . . . . . . . . . .ROYCO 43 . . . . . . . . . . . . . .ASG 43 . . . . . . . . . . . . . . . . .CASTOLEASE PS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-T-5544 . . . . . . . . . . . . . . .ROYCO 44 . . . . . . . . . . . . . .ASC 08 . . . . . . . . . . . . . . . . .BRAYCOTE 655 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-H-5606A* . . . . . . . . . . . .ROYCO 756A . . . . . . . . . . . .ASF 4 . . . . . . . . . . . . . . . . . .BRAYCO 756, 757 . . . . . . . .UNIVIS J13 . . . . . . . . . . . . . .AERO HFA . . . . . . . . . . . . MIL-H-5606G . . . . . . . . . . . . .ROYCO 756 . . . . . . . . . . . . .ASF 41 . . . . . . . . . . . . . . . . .CASTROLAERO H515 . . . . .UNIVIS J41 . . . . . . . . . . . . . .AERO HF. . . . . . . . . . . . . . MIL-G-6032 TYPE 1 . . . . . . .ROYCO 32 . . . . . . . . . . . . . .AV GR S.7108 . . . . . . . . . . . .CASTROLEASE PV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-PRF-6081D . . . . . . . . . . .ROYCO 481 . . . . . . . . . . . . .ASTO 2 . . . . . . . . . . . . . . . . .CASTROLAERO GT1010 . . . . . . . . . . . . . . . . . . . . . . . . . .AVREX 201 . . . . . . . . . . . . MIL-H-6083B* . . . . . . . . . . . .ROYCO 783B . . . . . . . . . . . .ASF 7 . . . . . . . . . . . . . . . . . .BRAYCO 783 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AVREX 903 . . . . . . . . . . . . MIL-PRF-6083F . . . . . . . . . . .ROYCO 783 . . . . . . . . . . . . .ASF 71 . . . . . . . . . . . . . . . . .BRAYCO 783 . . . . . . . . . . . .UNIVIS PJ-42 . . . . . . . . . . . .AVREX 904 . . . . . . . . . . . . MIL-L-6085 . . . . . . . . . . . . . . .ROYCO 885 . . . . . . . . . . . . .ASF 12 . . . . . . . . . . . . . . . . .BRAYCO 885 . . . . . . . . . . . .UNIVIS P12 . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-L-6086M . . . . . . . . . . . . .ROYCO 586 . . . . . . . . . . . . .ASF 5MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-L-6086L . . . . . . . . . . . . . .ROYCO 586L . . . . . . . . . . . .ASF 5LA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-C-6529 TYPE 1 . . . . . . . .ROYCO 581 . . . . . . . . . . . . .ASF 2XN . . . . . . . . . . . . . . . .BRAYCO 481 . . . . . . . . . . . .RUSTBAN 631 . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-C-6529 TYPE 2 . . . . . . . .ROYCO 482 . . . . . . . . . . . . .ASF 2F . . . . . . . . . . . . . . . . .BRAYCO 482 . . . . . . . . . . . .RUSTBAN 632 . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-C-6529 TYPE 3 . . . . . . . .ROYCO 483 . . . . . . . . . . . . .ASF 2T . . . . . . . . . . . . . . . . .BRAYCO 483 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-PRF-7024E . . . . . . . . . . .ROYCO 950 . . . . . . . . . . . . .AV CALIB FL2 . . . . . . . . . . . .BRAYCOTE 922 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-L-7808K Gr 3 . . . . . . . . .ROYCO 808 . . . . . . . . . . . . .ASTO 308 . . . . . . . . . . . . . . .CASTROL 399 . . . . . . . . . . .ETO 2389 . . . . . . . . . . . . . . .RM 248 . . . . . . . . . . . . . . . MIL-L7870 . . . . . . . . . . . . . . .ROYCO 363 . . . . . . . . . . . . .ASF 3 . . . . . . . . . . . . . . . . . .BRAYCO 363 . . . . . . . . . . . .INSTRUMENT OIL . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-F-17111 . . . . . . . . . . . . . .ROYCO 717 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BRAYCO 717 . . . . . . . . . . . .UNIVIS J26 . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-G-21164 . . . . . . . . . . . . .ROYCO 64 . . . . . . . . . . . . . .ASG 17 . . . . . . . . . . . . . . . . .BRAYCOTE 664 . . . . . . . . . .BEACON Q2 . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-G-23549 . . . . . . . . . . . . .ROYCO 49 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-PRF-23699F Std . . . . . . .ROYCO 500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ROYCO 899 . . . . . . . . . . . . .ASTO 500 . . . . . . . . . . . . . . .CASTROL 5000 . . . . . . . . . .BP 2380 . . . . . . . . . . . . . . . .MOBIL JET OIL II . . . . . . . MIL-PRF-23699 (HTS) . . . . . .ROYCO 560 . . . . . . . . . . . . .ASTO 560 . . . . . . . . . . . . . . .CASTROL 5050 . . . . . . . . . .BP 2197 . . . . . . . . . . . . . . . .MOBIL JET OIL 254 . . . . . MIL-G-23827 . . . . . . . . . . . . .ROYCO 27 . . . . . . . . . . . . . .ASG 7 . . . . . . . . . . . . . . . . . .CASTROLEASE AI . . . . . . . .BEACON 325 . . . . . . . . . . . .MOBIL GREASE 27 . . . . . MIL-G-24139 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ASG 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . DoD-G-24508 . . . . . . . . . . . . .ROYCO 28CF . . . . . . . . . . . .ASG 22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MOBIL GREASE 28 . . . . . MIL-G-25013 . . . . . . . . . . . . .ROYCO 13CF . . . . . . . . . . . .ASG 15A/15CF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-G-25537 . . . . . . . . . . . . .ROYCO 37 . . . . . . . . . . . . . .ASG 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-G-25681 . . . . . . . . . . . . .ROYCO 81MS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BRAYCO 868 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-G-25760* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ASG 16 . . . . . . . . . . . . . . . . .BRAYCOTE 660 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-L-46000 . . . . . . . . . . . . . .ROYCO 46 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BRAYCOTE 646 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-L-46150 . . . . . . . . . . . . . .ROYCO 46TF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BRAYCOTE 650 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-H-46170 TYPE 1 . . . . . . .ROYCO 770 . . . . . . . . . . . . .ASF 61 . . . . . . . . . . . . . . . . .BRAYCO 883 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-PRF-63460D . . . . . . . . . .ROYCO 634 . . . . . . . . . . . . .ASF 634 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-G-81322E . . . . . . . . . . . .ROYCO 22CF . . . . . . . . . . . .ASG 22 . . . . . . . . . . . . . . . . .BRAYCOTE 622 . . . . . . . . . .UNITEMP 500 . . . . . . . . . . .MOBIL GREASE 28 . . . . . MIL-G-81827 . . . . . . . . . . . . .ROYCO 22MS . . . . . . . . . . .ASG 23C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MOBIL GREASE 29 . . . . . MIL-PRF-83282D . . . . . . . . . .ROYCO 782 . . . . . . . . . . . . .ASF 31 . . . . . . . . . . . . . . . . .BRAYCOTE 882 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MOBILAERO HFS. . . . . . . DoD-L-85336 . . . . . . . . . . . . .ROYCO 36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BRAYCOTE 647 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . DoD-L-85734 . . . . . . . . . . . . .ROYCO 555 . . . . . . . . . . . . .ASTO . . . . . . . . . . . . . . . . . . .555 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ETO 55 . . . . . . . . . . . . . . . MIL-C-87252 . . . . . . . . . . . . .ROYCO 602 . . . . . . . . . . . . .ASF 602 . . . . . . . . . . . . . . . .BRAYCO 889 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RM 301 AA . . . . . . . . . . . . W-L-800 . . . . . . . . . . . . . . . . .ROYCO 308 . . . . . . . . . . . . .ASF 18 . . . . . . . . . . . . . . . . .BRAYCO 300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . MIL-C-87257 . . . . . . . . . . . . .ROYCO 777 . . . . . . . . . . . . .ASF 51 . . . . . . . . . . . . . . . . .BRAYCO 881 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . BMS 3-32 T1 . . . . . . . . . . . . .ROYCO SSF . . . . . . . . . . . .Shell SSF . . . . . . . . . . . . . . .CASTROLAERO 35 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . BMS 3-32 T2 . . . . . . . . . . . . .ROYCO LGF . . . . . . . . . . . .Shell LGF . . . . . . . . . . . . . . .CASTROLAERO 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . DERD-2487 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ASTO 750 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BP 274 . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . .
* Obsolete spec** Products may not be qualified to MIL-Spec
CROSS REFERENCE FOR AVIATION PRODUCTS
GREASESROYAL LUBRICANTS
506 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Royco® Synthetic Greases for Aerospace, Military, and Industrial Applications
Since the dawn of the Jet Age, Royal Lubricants has been the premier supplier of aerospace-grade synthetic lubricants to both military and commercial operators. This means thatwe must meet the most demanding quality control standards in the lubricants industry. At Royal, nothing less than perfect adherence to those standards is acceptable. BecauseRoyal has the most comprehensive line of aerospace and Mil-Spec lubricants in the world, you can obtain the majority of your consumables from just one source. And you can dothat with the confidence that Royal is an award-winning supplier to the U.S. Government, NATO, and practically all the major air carriers in the world. Royal works hand-in-glovewith most major airframe, engine, and aircraft subsystem manufacturers to ensure that the very latest developments in lubricant technology are available to you.As a result, you save from reduced maintenance requirements and longer life for your systems components. If required, we can even custom manufacture compounds and lubricantsto meet your own stringent requirements and specifications.
ROYCO 11MS high load grease for landing gear. A smooth, general purpose aircraft grease containing molybdenum disulfide, a highly refined mineral base oil, oxidation andcorrosion inhibitors, and a non-soap thickener. Ideal for use on highly loaded steel-on-steel surfaces requiring resistance to rust and corrosion (e.g., bogie pivot pins and otherlanding gear assemblies). Should not be used on high speed bearing applications without prior performance evaluation.
Part No. DescriptionROYCO 11MS-35LB High load grease for landing gear
ROYCO 22MS synthetic high load grease - wide temperature ranges. This synthetic hydrocarbon-based grease in a non-soap type thickener contains both graphite andmolybdenum disulfide, Royco 22MS is fortified with rust, oxidation, and corrosion inhibitors, water washout resistance, and enhanced laod carrying capacity. It is recommendedfor use in gearbox, splines, and heavily loaded sliding steel-on-steel surfaces where the solid load carrying additive package will prevent or delay seizure in the event ofinadequate lubrication.
Part No. Description SizeROYCO 22MS-35LB Synthetic high load grease 35 lbs. pail
ROYCO 32 fuel, solvent, and oil-resistant grease. This stiff textured synthetic oil-based grease is fortified with a lithium soap type thickener to resist washoff by fuels, oils,hydrocarbon solvents, and high pressure steam or water. Royco 32 contains additives for oxidation and corrosion resistance as well as tackifiers to resist mechanical removal ofthe lubricant. This grease is recommended for lubricating high pressure valves, as a gasket or sealing aid for pumps and gearboxes, and as a plug valve lubricant where fuel, oil,alcohol, and steam or water resistance are required. Royco 32 is not recommended for applications requiring an antiwear additive package.
Part No. Description SizeROYCO 32-1.75LB Fuel, solvent and oil-resistant grease 35 lbs. pail
ROYCO 43 pneumatic systems grease. A lithium soap thickened, oil-based grease with good oxidation resistance, moisture and corrosion protection, and lubricity - especiallyat low temperatures, Royco 43 is an excellent choice for the lubrication of rubber-on-metal surfaces. Has little or no effect on elastomers. Recommended for use on assembliessuch as pressurized bulkhead seals and grommets as well as other applications requiring rubber-to-metal lubrication.
Part No. Description SizeROYCO 43-6.5LB Pneumatic systems grease 6.5 lbs. can
ROYCO 44 graphite and petrolatum anti-seize and thread compound. This compound is a stiff, charcoal grey lubricant with microfine graphite in a petrolatum base. Royco44 can prevent seizure and overtorque conditions in such fasteners as engine mounting hardware and brake assemblies, It is specified in many aircraft and engine maintenanceprocedures.
Part No. Description SizeROYCO 44-1.75LB Graphite and petrolatum anti-seize and thread compound 1.75 lbs.
ROYCO 13CF ball and roller bearing grease - extreme wide temperature ranges. An inert PTFE-thinkened greased utilizing a polysiloxane (silicone) oil together withadditives for rust, oxidation, and corrosion resistance. Excellent low ans high temperature proerties and low volatility as well as water washout resistance and superiormechanical stability make this grease an excellent choice in lightly loaded anti-friction bearings, actuators, and controls where continuous extreme variations in temperature maybe encountered.
Part No. Description SizeROYCO 13CF-1.75LB Ball and roller bearing grease 1.75 lbs. canROYCO 13CF-35LB Ball and roller bearing grease 35 lbs. pail
Synthetic Greases
OILS
507Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
MOBIL
Mobil® Jet Oil 254 synthetic aircraft-type gas turbine lubricant. MIL-L-23699E APPROVED. Mobil Jet Oil is a third-generation synthetic lubricant made from a speciallyprepared hindered-ester base stock fortified with a special chemical additive package. The result is a product have superior thermal and oxidation stability that resistsdeterioration and deposit formation, while maintaining the physical characteristics required by builder and military specifications. Because of this, the physical properties of MobilJet Oil 254 are similar to currently available, earlier-generation turbine lubricants.
Accessory Approvals Engine Approvals• AiResearch - Auxilary power units and air cycle machines • Textron-Lycoming• Hamilton Standard Division, United Technologies Corp. - Starters • Allison Engine Co.• Sundstrand Corp. - Constant-speed drives and integrated-drive generators • General Electric Company• Westinghouse Aerospace Electrical Division - Generators • International Aero Engines
• Pratt & Whitney Group, United Technologies Corp.• Pratt & Whitney, Canada• Rolls-Royce Limited• SNECMA• Sundstrand• Garrett Turbine Engine Co. (Allied-Signal Aerospace Co.)
Part No. Description SizeMOBIL 254 QT Turbine lubricant quart
Mobil® Jet Oil II aircraft-type gas turbine lubricant. MIL-L-23699C APPROVED. Mobil Jet Oil II gas turbine lubricant is a combination of a highly stable synthetic base fluidand a unique chemical additive package. The combination provides outstanding thermal and oxidative stability to resist deterioration and deposit formation in both the liquid andvapor phases, as well as excellent resistance to foaming. Mobil Jet Oil II is compatible with other synthetic gas turbine lubricants meeting MIL-L-23699E. However, mixing withother products is not recommended because the blend would result in some loss of performance characteristics of Mobil Jet Oil II. Mobil Jet Oil II is compatible with all metalsused in gas turbine construction, as well as F Rubber (Viton A), H Rubber (Buna N), and silicone seal materials.
Accessory Approvals Engine Approvals• AiResearch - Auxiliary power units and air cycle machines • Textron-Lycoming• Hamilton Standard Division, United Technologies Corp. - Starters • Allison Engine Co.• Sundstrand Corp. - Constant-speed drives and integrated-drive generators • General Electric Company• Westinghouse Aerospace Electrical Division - Generators • Pratt & Whitney Group, United Technologies Corp.
• Pratt & Whitney, Canada• Rolls-Royce Limited• SNECMA• Garrett Turbine Engine Co. (Allied-Signal Aerospace Co.)
Part No. Description SizeMOBIL JET II Turbine lubricant quart
Mobilgrease® 28 synthetic lubricating grease. MOBILGREASE 28 EXCEEDS THE REQUIREMENTS OF U.S. MILITARY SPECIFICATION MIL-G-81322E GREASE (GRADE A), GENERAL-PURPOSE, AIRCRAFT, AND MEETS THE REQUIREMENTS OF U.S. MILITARY SPECIFICATION DOD-G-24508A (NAVY) FOR SHIPBOARDAUXILIARY MACHINERY. IT CAN BE DESIGNATED U.S. MILITARY SYMBOL SYMBOL WTR AND NATO SYMBOL G-395. Mobilgrease 28 is manufactured from a synthesizedhydrocarbon fluid and a nonstop thickener. Its consistency is between on NLGI No. 1 and No. 2 grease. It offers outstanding performance over wide temperature ranges, with theexcellent retention and resistance to high-temperature degradation. In addition, it resists washing, provides superior load-carrying ability, reduces frictional drag, and preventsexcessive wear.
Part No. Description SizeMOBIL 28 Synthetic lubricating grease 14 oz.MOBIL 28 5LB Synthetic lubricating grease 5 lbs.
Aviation Lubricants
Greases
OILSBP
508 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
BP2197 Turbo Oil
BP2197 Turbo Oil is a synthetic turbo oil of approximately 5 centistokes at 212°F (100°C) and is approved against MIL-PRF-23699F HTS. It is formulated with a special syntheticbasestock and additive to achieve the superior high temperature cleanliness required for aircraft engines of the future.
Part No. Description SizeBP2197 QT Turbine lubricant quart
BP2380 Turbo Oil
BP2380 Turbo Oil is a 5 cSt synthetic lubricant that is approved against US military specification MIL-PRF-23699F-STD, and UK specification DEF STAN 91-101/2 (replacedDERD 2499). This lubricant provides a balanced combination of thermal and oxidation stability, load carrying capacity, lower volatility and has the best low temperature flowcharacteristics of all 5 cSt turbine oils.
Part No. Description SizeBP2380 QT Turbine lubricant quart
BP2389 Turbo Oil
BP2389 Turbo Oil is a synthetic lubricant having a viscosity of approximately 3 cSt at 212°F. This oil is approved against US military specification MIL-PRF-7808L grade 3 andincorperates a level of technology from Type II (5 cSt) commercial turbine lubricants.
Part No. Description SizeBP2389 QT Turbine lubricant quart
BP274 Turbo Oil
BP274 Turbo Oil is a synthetic turbo oil having a viscosity of approximately 7.5 cSt at 212°F (100°C). It is formulated with special synthetic base stocks and additives to inhibitwear, oxidation, and foaming. It provides good high temperature performance and load-carrying ability. BPTO274 is approved against DEF STAN 91-98/1 (DERD 2487).
Part No. Description SizeBP234 QT Turbine lubricant quart
EXXON HYJET IV-APLUS LUBRICANTExxon HyJet IV-Aplus phosphate ester aviation hydraulic fluid is the latest in a series of fire-resistantType IV aviation hydraulic fluids. Built on the strengths of its predecessors, Exxon HyJet IV-Aplus is themost advanced commercially available fluid of its kind. It offers enhanced thermal stability andimproved worker health characteristics, as well as low density, proprietary rust protection, andexcellent protection againstt erosive wear and deposit formation under the most severe conditions.
Part No.HYJET4A+ QTHYJET4A+ GALHYJET4A+ 5GAL
OEM APPROVALS:Exxon HyJet IV-Aplus is included in the Qualified Products Lists ofthe following OEMS:
Airbus/Aerospatiale
Avion de Transport Régional (ATR)
British Aerospace/Avro International
Boeing
Bombardier/Canadair
Bombardier/De Havilland
Cessna Aircraft Co.
Fokker Aircraft B.V.
Gulfstream Aerospace
Lockhead
McDonnel Douglas
OILS
509Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
SHELL
Technical Information from Shell Lubricants
AEROSHELL* OIL W MULTIGRADE 15W-50DISPERSANT TYPE MULTIGRADE AIRCRAFT PISTON ENGINE OIL
AEROSHELL Oil W Multigrade 15W-50 is a synthetic blend, ashless dispersant (AD type) aircraft piston engine oil. It is approved for SAE J-1899 specification (formerly MIL-L-22851D) for four cycle aircraft piston engine oils. It also meets aircraft reciprocating engine AD specifications including Teledyne-Continental MOTORS MHSNo. 24B and Avco Lycoming No. 301F. For operators of Lycoming engines including models O-320H, 0-360E, LO-360, TO-360E there is no need to add Lycoming additive LW16702. As per FAA Airworthiness Directive AD 80-04-03R2 (Transport Canada reference 5014-4 (AARDGM), AEROSHELL Oil Multigrade 15W-50 meets an equivalent methodof compliance without the addition of LW 16702.
Part No.AEROSHELL 15W50
AEROSHELL* FLUID 2FPRESERVATIVE OIL FOR AVIATION PISTON ENGINES
AEROSHELL Fluid 2F is a powerful combination of additives and specially designed to protect against rust and corrosion during storage. AEROSHELL Fluid 2F is also a“flyaway” oil and it may be used in normal flight operations for up to 50 hours of engine life.
Part No.AEROSHELL 2F
OILSSHELL
510 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Technical Information from Shell Lubricants
AEROSHELL* GREASESPREMIUM GREASES FOR AVIATION APPLICATIONS
AEROSHELL Grease 5 is a general aviation grease suitable for wheel bearings and high speed applications including magnetos, generators and starters operating intemperatures from -23°C to +177°C.
AEROSHELL Grease 6 is a multi-purpose airframe grease for use in anti-friction bearings, gearboxes and plain bearings operating in temperatures between -40°C and +121°C.
AEROSHELL Grease 7 is a multi-purpose grease that may be used on turbine-engined aircraft. It is an advanced grease designed to cover a wide temperature range from-73°C to +149°C.
AEROSHELL Grease 14 is designed for greasing applications on helicopters including main and tail rotor bearings, and splines. It has outstanding anti-fret properties and it maybe used over the temperature range from -54°C to +93°C.
AEROSHELL Grease 17 is a fully synthetic grease containing 5% molybdenum disulphide. It is particularly suitable for lubricating heavily loaded sliding surfaces such as bogiepins on aircraft landing gear assemblies over the temperature range of -73°C to +149°C.
AEROSHELL Grease 22 is a fully synthetic grease designed for severe operating conditions including high bearing loads, high speeds and where long grease retention and highwater resistance are required. AEROSHELL Grease 22 covers the operating temperature from -65°C to +204°C.
AEROSHELL Grease 33 is our newest generation multi-purpose synthetic grease. It is specifically designed to lubricate a wide range of applications and operating conditions oncommercial aircraft. It is approved for Boeing’s BMS 3-33 specifications and it covers the operating temperature between -73°C and +121°C.
AEROSHELL* TURBINE OILS100% SYNTHETIC TURBINE OILS
AEROSHELL Turbine Oil 500 is approved for MIL-PRF-23699F STD Grade for many turbine engines as well as the majority accessory applications.
AEROSHELL Turbine Oil 555 meets MIL-PRF-23699F requirements and it is DOD-L-85734 approved for high temperature/high load applications including Bell helicoptertransmissions.
AEROSHELL Turbine Oil 560 is a third generation “low coking” turbine oil fully approved for MIL-PRF-23699F HTS Grade for high thermal stability applications including highby-pass turbofan engines.
AEROSHELL* OILS WDISPERSANT TYPE AIRCRAFT PISTON ENGINE OILS
AEROSHELL Oils W 65, 80, 100, 120 are ashless dispersant type aircraft piston engine oils. All grades are approved for SAE J-1899 specifications (formerly MIL-L-22851D) forashless dispersant aircraft piston engine oils. These oils also meet aircraft reciprocating engine AD (ashless dispersant type) specifications for several four cycle aircraft pistonengines including Teledyne Continental MHS No. 24B and Avco Lycoming No. 301-F.
511Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
SHELLOILS
AEROSHELL* OILSNON-DISPERSANT TYPE AIRCRAFT PISTON ENGINE OILS
AEROSHELL Oils 80, 100, 120 are mineral oil based aircraft piston engine oils. All grades are approved for SAE J-1966 specifications (formerly MIL-L-6082E) for ashless non-dispersant aircraft piston engine oils.
APPLICATIONS
AEROSHELL Oils are primarily used in aircraft piston engines during break-in. Consult your aircraft engine builder or overhaul facility for specific recommendations.
AEROSHELL Oils are approved for use in all four-cycle aircraft engines that DO NOT require ashless dispersant (AD Type) oils.
PERFORMANCE BENEFITS
• AEROSHELL Oils are straight mineral oils blended with selected HVI paraffinic basestocks and the include a pour point depressant additive to provide improved fluidity at lower temperatures
• HVI Paraffinic Basestocks provide outstanding oil film strength and viscosity under most operating conditions.• SAE J 1966 Approval assures these lubricants have been thoroughly tested and evaluated to provide excellent lubrication in aircraft piston engines not requiring
ashless dispersant type oils.Note: For older aircraft engines please consult the engine builder’s manual for specific lubrication recommendations and specifications.
PERFORMANCE SUMMARY
• SAE J-1966 (formerly MIL-L-6082E) Approved• Aviation Viscosity Grades 80, 100, and 120• Equivalent SAE Grades 40, 50 and 60
PHILLIPS
512 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
OILS
X/C® Aviation Multiviscosity Oils
20W50XC
20W-50XC provides opposed piston engines improved performance than single grade oils. X/C is an ashless dispersant mineralbase oil that can be used during the break-in period and then as an operational oil to TBO. X/C should be used year round to takeadvantage of all the performance benefits this multiviscosity aviation oil has to offer.
Part Numbers20W50XC-QT20W50XC-GL20W50XC-55GL
25W60XC
25W-60XC has much to offer the radial engines and other aviation piston engines originally designed to run on heavier grade oils.Pilots and mechanics will notice benefits immediately with 25W-60 over the traditional heavier single grade aviation oils. Benefitssuch as improved oil flow at start up, quicker warm up time, cooler operating temperatures and a cleaner operating engine. X/C25W-60 like the 20W-50 should be used year round, during break-in and on to TBO.
Part Numbers25W60-GL25W60-2.5GL25W60-55GL
PHILLIPS AVIATION OIL TYPE M 20W50
Phillips 66 Type M Aviation Oils are designed for use in aviation engines where the operator prefers continued use of all-mineraltype oil. It does not contain dispersant type additives. This oil can be used as break-in oil for newly overhauled engines when an oilof this type is recommended. Break-in oil is normally accomplished in less than 25 hours of engine operation. When compared tosingle-grade oils, Type M Aviation Oil 20W-50 offers improved cold temperature starting, quicker flow of oil to the cold engine, plusa full bodied oil for high-temperature, high-load operation.
Part Numbers20W50M QT
AVBLEND AVBLEND
AVBLEND provides benefits other products can’t. Keeping your engine in toprunning condition provides added safety and cost savings, regardless of whetheryour aircraft is flying or in storage. When you are in the air, AVBLEND helps provideadded performance. More importantly, AVBLEND reduces harmful deposits in yourengine and helps prevent the formation of rust while your aircraft is not in use.
AVBLEND Helps:• Prevent rust• Reduce premature wear• Prevent valves from sticking• Prevent carbon and deposit build-up• Reduce dry start damage• Restore peak combustion performance
513Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
LPSELECTRICAL CLEANERS
NoFlash NU Precision Contact Cleaner isnonflammable, and offers a unique alternativeto HCFCs when cleaning electrical parts andother delicate mechanisms.
Replaces HCFCs
NoFlash NUPrecision Contact Cleaner• NEW! Patented Formula - Patented US #6342471• Nonflammable precision cleaning• Unique alternative to HCFC cleaners• Nonconductive• Fast evaporating• Quick penetration• No residue• Safe to use on most surfaces• Inverta Spray Valve allows one to spray in an upright or inverted position
Size Part No.15 oz. (425 grams) C04015
The nonflammable, fast evaporating electricalcleaner which is safe on plastic and does notcontain HCFCs.
Replaces HCFCs
NoSpark Electrical Cleaner• NEW! Patented Formula - Patented US #6342471• Nonflammable• Plastic safe• Does not contain HCFCs• Fast avaporating• Quick penetration• No residue• Nonconductive
Size Part No.14 oz. (397 grams) C04816
QB Precision Duster• Quick blast precision duster removes contaminants,dirt, dust and other soils• Excellent for use on electronics and delicatemechanisms• Nonflammable• Safe on plastic• No residue• Moisture free
Size Part No.10 oz. (284 grams) C05710
Replaces HCFCs
CFC Free Elecro Contact Cleaner• Fast evaporating• No residue• Low odor• Nonconductive• Does not contain HCFCs• Safe on plastics• Inverta Spray Valve allows one to spray in an upright or inverted postion
Size Part No.NSN 6850-01-411-1834 (11 oz.) 11 oz. (312 grams) C03116NSN 6850-01-411-6571 (1 gal.) 1 gal. (3.78 liters) C03101NSN 6850-01-412-0044 (5 gal.) 5 gal. (18.93 liters) C03105NSN 6850-01-412-0043 (55 gal.) 55 gal. (208 liters) C03155
ELECTRICAL CLEANERSLPS
514 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Micro-X is ideal forremoving dirt and oilfrom delicate electricaland electronic parts.
Replaces HCFCs
Micro-X Fast Evaporating Contact Cleaner• Fast evaporating• Quick penetration• No residue• Low odor• Does not contain HCFCs• Safe on plastics• No rinsing• Inverta Spray Valve allows one to spray in an upright or inverted position
Size Part No.11 oz. (312 grams) C0451655 gal. (208 liters) C04555
Meets or exceedsthese specs:Learjet LAS 1239
Replaces HCFCs
Electro 140° Contact Cleaner• Flash point above 140°F (60°C)• Superior wetting and penetrating action• Controlled evaporation• No residue• Nonconductive• Safe to use on most surfaces• Does not contain HCFCs• Inverta Spray Valve allows one to spray in an upright or inverted position
Size Part No.NSN 8650-01-418-1704 (11 oz.) 11 oz. (312 grams) C00916NSN 8650-01-418-1706 (1 gal.) 1 gal. (3.78 liters) C09128NSN 8650-01-418-1699 (5 gal.) 5 gal. (18.93 liters) C00905NSN 8650-01-418-1700 (55 gal.) 55 gal. (208 liters) C00955
The foaming action of the aerosolclings to vertical surfaces andremoves grease, oil and dirt.
Meets or exceeds these specs:McDonnell Douglas CSD #1Boeing D6-17487 Rev. HAMS 1526A
Precision CleanMulti-Purpose Cleaner/Degreaser• Water-based• Biodegradable• Super industrial-strength• Removes tough, stubborn stains and soils such as grease and oil• Nonflammable• pH Concentrate = 13• pH Ready-to-Use - 12.5• Does not contain chlorinated or petroleum solvents, bleach, ammonia,abrasives or butyl• Rinses clean• Contains a corrosion inhibitor to help prevent flash rusting• Safe on all surfaces
Concentrate Part No.1 gal. (3.78 liters) C027015 gal. (18.93 liters) C0270555 gal. (208 liters) C02755Ready-to-Use Part No.
NEW! 18 oz. (510 grams) aerosol C0272028 oz. (828 ml) trigger C0272855 gal. (208 liters) C02765
PreSolve tackles the toughestdegreasing applicationsquickly. It is especially suitedfor removing grease,adhesives, tars, and oils.
Meets or exceeds these specs:McDonnell Douglas CSD #1Boeing D6-17487 Rev. H
PreSolve® Citrus Degreaser• High performance citrus based degreaser• Ideal for removing grease and oil• Fast acting penetration• Controlled evaporation• Does not contain chlorinated solvents• Nonconductive• Safe on all metals and most plastics• Inverta Spray Valve allows one to spray in an upright or inverted postion
Size Part No.15 oz. (425 grams) C014201 gal. (3.78 liters) C014285 gal. (18.93 liters) C0140555 gal. (208 liters) C01455
LPS - INDUSTRIAL DEGREASERS
INDUSTRIAL DEGREASERS
515Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
LPS
F-104° is excellent for cleaning grease and oil onmachines and equipment.
Meets or exceeds these specs:Airbus ABR 9-0140 Type IBoeing D6-17487 Rev. LLearJet 1239JComplies with the Aerospace NESHAP for wipe solvents
F-104°Fast Dry Solvent/Degreaser• Heavy-duty degreaser• 104°F (40°C) flash point• Controlled evaporation• Does not contain chlorinated solvents• Safe to use on most surfaces• Nonconductive• No rinsing• Minimal residue• Inverta Spray Valve allows one to spray in an upright or inverted position
Size Part No.15 oz. (425 grams) C049201 gal. (3.78 liters) C049285 gal. (18.93 liters) C0490555 gal. (208 liters) C04955
Instant Super Degreaser II is nonflammable and doesnot contain TCE, HCFCs, or any other chlorinatedsolvents.
Meets or exceeds these specs:McDonnell Douglas CSD #1Boeing D6-17487 Rev. H
Instant Super Degreaser II• Excellent degreaser for removing greases and oils• Nonflammable• Fast evaporating• Does not contain chlorinated solvent• Safe on all metals• No residue• Nonconductive• Inverta Spray Valve allows one to spray in an upright or inverted position
Size Part No.19 oz. (539 grams) C007191 gal. (3.78 liters) C071285 gal. (18.93 liters) C00705
ZeroTri is suited for heavy-dutydegreasing applications wherefast drying is essential.
ZeroTri Heavy-DutyDegreaser• Fast evaporating• Instant degreasing action• Nonconductive• Safe to use on most surfaces• Ideal for degreasing metals• Does not contain chlorinated solvents• No residue• Inverta Spray Valve allows one to spray in an upright or inverted postion
Size Part No.15 oz. (425 grams) C035201 gal. (3.78 liters) C035285 gal. (18.93 liters) C0350555 gal. (208 liters) C03555
TriFree Brake Cleaner is aheavy-duty non-chlorinatedsolvent that removes brakefluid, oil, and grease oncontact.
TriFree Brake Cleaner• Heavy-duty performance• Instant degreasing action• Improve brake performance• No chlorinated solvents• Helps stop disc brake squeal• Fast evaporation• Powerful jet spray• Compliant to California V.O.C. regualtions• No residue• Nonconductive
Size Part No.15 oz. (425 grams) C03620
INDUSTRIAL DEGREASERSLPS
516 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
HDX is nonflammable to provide an extradegree of safety in the workplace.
HDXHeavy-Duty Degreaser• Heavy-duty action removes oil, grease, wax, dirt, moisture, tar, brakefluid and other contaminants• Nonflammable• Fast evaporation• Low odor• Quick penetration• No residue
Size Part No.19 oz. (539 grams) C010201 gal. (3.78 liters) C010015 gal. (18.93 liters) C0100555 gal. (208 liters) C01055
A-151’s high flash point above 140°F allows use inareas where flammability poses a potential problem. A-151 is also ideal for dip tanks.
Meets or exceeds these specs:Pratt & Whitney SPOP 208McDonnell Douglas CSD #1Boeing D6-17487 Rev. HLearJet LAS 1239
A-151 Solvent/Degreaser• High flash point above 140°F (60°C)• Low odor• Controlled evaporation• No chlorinated solvent• Safe to use on most surfaces• No residue• Nonconductive• Inverta Spray Valve allows one to spray in an upright or inverted position
Size Part No.15 oz. (425 grams) C043201 gal. (3.78 liters) C043285 gal. (18.93 liters) C0430555 gal. (208 liters) C04355
Meets or exceeds these specs:Boeing BAC 5008
Tapmatic #1 Gold• Great for steel and aluminum• Excellent for low speed, high pressure applications• Minimizes torque increases• Does not contain chlorinated paraffins, water, solvent or inactive fillers• Aerosol provides a pinpoint stream with foaming action• Safe on all metals
Size Part No.11 oz. (312 grams) aerosol C4031216 fl. oz. (0.473 liters) C403201 gal. (3.78 liters) C403305 gal. (18.93 liters) C4034055 gal. (208 liters) C40360
LPS - CUTTING FLUIDS
LUBRICANTS/PENETRATES
517Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
LPS
LPS 1 displaces moisture, makingit ideal for drying out electrical /electronic components.
Meets or exceeds these specs:MIL-C-23411A, para. 3.1.1, 3.2-3.11Rolls-Royce Overhaul Process 430
LPS 1™ Greaseless Lubricant• Provides a dry, thin lubricating film• Resists oil, dust and dirt build-up• Fast acting penetration• Displaces moisture• Loosens rusted or frozen parts• Provides a short term, light, corrosion, resistant barrier• Nonconductive• Ideal for delicate mechanisms• Used worldwide in aviation• Safe on paint and most plastics• Inverta Spray Valve allows one to spray in an upright or inverted position
Size Part No.NSN 7930-01-380-9028 (11 oz.) 11 oz. (312 grams) C00116
1 gal. (3.78 liters) C01128NSN 9150-01-142-9773 (5 gal.) 5 gal. (18.93 liters) C00105
55 gal. (208 liters) C0015520 fl. oz. (591 ml.)trigger spray C00122
TKX is an excellent lubricant for cables,gears, and chains. TKX provides a nondrying,oily film for lubricating equipment andmachines.
TKX All-PurposePenetrant,Lubricant andProtectant• Excellent all purpose lubricant• Displaces moisture• Loosens rusted or frozen parts• Protects against corrosion• High flash point of 175°F (79°C)• Does not contain chlorinated solvents or silicones• Nonconductive• Safe on fabrics, plastic, paint, and other finishes• Inverta Spray Valve allows one to spray in an upright or inverted position
Size Part No.11 oz. (312 grams) C020161 gal. (3.78 liters) C020285 gal. (18.93 liters) C0200555 gal. (208 liters) C02055
LPS 2 is an excellent protective coating for hand andmachine tools, parts and equipment.
Meets or exceeds these specs:MIL-C-16173D Grade 3 Class 1,
para. 3.3, 3.4, 3.7-2.11MIL-C-81309D Type III,
para. 3.4-3.5
LPS 2™ Industrial-Strength Lubricant• Strong, multi-purpose lubricant and penetrant with added corrosion protection• Provides a nondrying, light, oily film for use on indoor/outdoor equipement• Reduces wear caused by friction and corrosion• Displaces moisture• Loosens rusted or frozen parts• Provides up to one year or protection• Nonconductive• Safe on paint and most plastics• Inverta Spray Valve allows one to spray in an upright or inverted postion
Size Part No.NSN 8030-00-838-7789 (11 oz.) 11 oz. (312 grams) C00216
1 gal. (3.78 liters) C021285 gal. (18.93 liters) C0020555 gal. (208 liters) C0025520 fl. oz. (591 ml.) C00222
End-User Education Tip-Surface Tension is the measurement of a liquid’s ability to“bead” or form droplets. The higher the surface tension, themore likely the product will bead-up on a surface and notpenetrate. LST’s extremely low surface tension results ininstant spreading, consistent coating, and deep penetration.
Meets or exceeds these specs:Federal Spec. VV-P-216C Type IA-A-50493 Type I
LST Penetrant• Specially formulated with low surface tension for fast penetrating action• Attacks rust and corrosion to free frozen parts• Powerful foaming action provides complete surface coverage• Displaces moisture• Lubricates and protects metal surfaces• No chlorinated solvents• Flash point of 175°F (79°C)• Inverta Spray Valve allows one to spray in an upright or inverted position
Size Part No.11 oz. (312 grams) C019161 gal. (3.78 liters) C019285 gal. (18.93 liters) C0190555 gal. (208 liters) C01955
LUBRICANTS/PENETRANTSLPS
518 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Heavy-Duty Silicone is ideal forsurfaces like rubber and plastics,where petroleum product can notbe tested.
Meets or exceeds these specs:FDA regulation 21 CFR 178.3570for Incidental Food Contact
Heavy-Duty Silicone Lubricant• Meets FDA regulations for incidental food contact• Meets USDA requirements for H1• Silicone-rich formula• Water-based formula• Colorless & orderless• Ideal for rubber and plastic surfaces• Eliminates sticking, binding and squeaking• Does not contain chlorinated solvents• Nonstaining• Safe on most surfaces
Size Part No.13 oz. (368 grams) C015165 gal. (18.93 liters) C01505
Dry Film Silicone Lubricant provides excellentlubrication and is ideal for releasing molded parts.
Dry Film Silicone Lubricant• Dry film will not attract dust or dirt• Nonflammable• Provides excellent lubrication• Excellent for releasing molded parts• Excellent for high temperature applications up to 500°F (260°C)• Colorless, thin film• Does not contain chlorinated solvents• Petroleum base
Size Part No.12 oz. (340 grams) C01616
Force 842° is ideal for break-inlubrication applications, and forpreventing sliding or threadedparts from seizing together.
Meets or exceeds these specs:MIL-L-46147-A Type II
Force 842°™Dry Moly Lubricant• Fortified with molybdenum disulfide• Provides a quick drying, thin film• For assembly and break-in lubrication• Works under high temperatures - 100,000 psi (6890 Bars)• Resists dust and dirt• Prevents seisure of parts• High adhesion• Water and chemical resistant
Size Part No.11 oz. (312 grams) C02516
Chainmate™ is designedto increase the life ofchains and wire ropes. Itwill also lengthenreapplicaion intervals andreduce maintenance time.
ChainMate™ Chain & Wire Rope Lubricant• Fortified with molybdenum disulfide• Increases the life of chains and wire ropes• Effective under extreme temperature and pressure ranges• Deep penetration to the core of wire ropes• Reduces wear caused by friction and corrosion• Lubricant and corrosion protectant• High adhesion• Use with guards in place to eliminate costly down time
Size Part No.11 oz. (312 grams) C02416
LUBRICANTS/PENETRANTS
519Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
LPS
Magnum is specially formulated with PTFE additiveswhich minimize friction and extend equipment life.
Magnum Premium Lubricant with PTFE• High performance lubricant with PTFE additives• Ideal for both regular and extreme conditions• Penetrates and protects metal against rust and corrosion• Flash point of 175°F (79°C)• Safe to use on most surfaces• Displaces moisture• Inverta Spray Valve allows one to spray in an upright or inverted position
Size Part No.11 oz. (312 grams) C006165 gal. (18.93 liters) C00605
Dry Film PTFELubricant’s colorless,thin film will not attractdust or dirt.
Dry Film PTFE Lubricant• Dry film will not attract dust or dirt• Nonflammable• Provides excellent lubrication• Ideal for releasing molded parts• Excellent for high temperature applications up to 500°F (260°C)• Paintable• Colorless, thin film• Does not contain chlorinated solvents• Does not contain silicones
Size Part No.12 oz. (340 grams) C02616
A low-friction anti-seize lubricant for extraprotection in extreme environments.
Meets or exceeds these specs:MIL-PRF-907E
Copper Anti-Seize• Prevents seizure up to 1800°F (982°C)• Lead free• Protects against seizure, heat-freeze, galling, rust and corrosion• Ideal for use on stainless steel and for joining dissimilar metals• Brushes easily• Highly adhesive on both wet and dry surfaces• Cushions impact and shock loads• “Copper plates” surfaces to prevent metal-to-metal contact• Will not run, drip or settle out• Copper color
Size Part No.12 oz. (340 grams) aerosol C029161/2 lb. (227 grams) C029081 lb. (454 grams) C02910
Meets or exceeds these specs:MIL-PRF-907ENickel Anti-Seize• Prevents seizure up to 2600°F (1427°C)• Does not contain lead, copper or graphite• Protects against seizure, rust, and corrosion• Chemically inert• Acid resistant• Can be used with ammonia, acetylene, and vinyl monomers which areunstable in the presence of copper• Strong resistance to water washoff• Brushable to -18°F (0°C)• Will not run, drip or settle out• Silver color
Size Part No.1/2 lb. (227 grams) C039081 lb. (454 grams) C03910
LUBRICANTS/PENETRANTSLPS
520 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
A moly-fortified extreme pressurelubricant that protects againstseisure and heat-freeze.
Meets or exceeds these specs:MIL-PRF-907E
All-Purpose Anti-Seize• Prevents seisures up to 1800°F (982°C)• Moly fortified• Lead fee• Protects againt seisures, heat-freeze, galling, rust and corrosion• Lowers friction; reduce torque• Reduces maintenance costs• Not affected by contration, expansion or vibration• Will not run, drip or settle out• Steel blue color
Size Part No.1/2 lb. (227 grams) C041081 lb. (454 grams) C04110
BrightCoat Cold Galvanizeprovides a shiny zinc coating toprevent rust and corrosion.
Meets or exceeds these specs:MIL-P-21035, ASTM A-780
BrightCoat Cold GalvanizeCorrosion Inhibitor• Shiny zinc coating• Prevents rust and corrosion on all metals• Restores hot dip galvanizing• Dries to touch in 15 to 30 minutes• Repairs rusted, galvanized and welded surfaces• Electrochemically protects bare metal• Heat resistant, flexible coating• Will not yellow, chalk, crack or peel• Meets performance requirements of ASTM A780-93A
Size Part No.13 oz. (368 grams) C05916
Cold Galvanize works as a paintprimer over rust.
Meets or exceds these specs:MIL-P-21035, ASTM A-780
Cold Galvanize Corrosion Inhibitor• 95% zinc-rich galvanized coating• Works like a hot-dip on ferrous metals indoors and out• Withstands water temperature up to 212°F (100°C) and continuous dryheat up to 750°F (400°C)• Commonly used as a flash rust preventive on welded areas• Long term protection• Flexible coating will not yellow, chalk, crack or peel• Electrochemically protects bare metal• Dries in 3 - 5 minutes
Size Part No.NSN 8018-00-214-7241 (14 oz.) 14 oz. (397 grams) C00516
1 gal. (3.78 liters) C05128
LPS - CORROSION INHIBITORS
CORROSION INHIBITORS
521Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
LPS
LPS 3 leaves a soft, self-healing,waxy film that resists moisture.
Meets or exceeds these specs:Boeing BMS-3-23F Type IIMIL-C-0083933A, para. 3.2-3.16MIL-C-16173D Grade 2, Class IDMS 2150Airbus TN A. 007.10138 Type I, Grade 2
LPS 3™ Heavy-Duty Rust Inhibitor• Protects up to two years• Stops rust and corrosion• Provides non-sling lubrication• Self-healing, waxy film• Provides anti-seize coating• Safe to use on rubber, fabric, plastics and paints
Size Part No.NSN 6850-00-118-0666 (11 oz.) 11 oz. (312 grams) C00316NSN 6850-00-363-0841 (1 gal.) 1 gal. (3.78 liters) C03128
5 gal. (18.93 liters) C0030555 gal. (208 liters) C0035520 fl. oz. (591 ml.)trigger spray C00322
Qualified to these specs:Boeing BMS-3-23F Type II
HardCoat Corrosion Inhibitor• Multi-year protection or metal parts in outside storage• 500+ hours salt spray resistance• Durable, hard transparent film• Commonly used on sides and tops of aircraft fuselage• Resists dripping and puddling during spray applications• Low odor• Ready-to use and can be applied with conventional airless or air-operated spray equipment• Safe to use on rubber, fabric, plastics and paints
Size Part No.1 gal. (3.78 liters) C033285 gal. (18.93 liters) C0330555 gal. (208 liters) C03355
Designed for the aerospace industry, this durable, hard film is excellent for preventingcorrosion in high risk areas, such as lower cargo sections and wheel wells. Procyon canbe used as a top coat when LPS 3 is used.
Meets or exceeds these specs:Boeing BMS-3-29Gulfstream GAProcyon°™Corrosion Inhibitor• Multi-year protection of metal•Durable, hard transparent film• Resistant to saltwater, salt spray, noisture, acid, alkali fumes and othercorrosive elements• Resist drippng and puddling during spray applications• Wide operating temperatre range• Low odor•Ready-to-use and can be applied with conventional airless or air-operatedspray equipment• Safe to use on rubber, fabric, plastics and paints
Size Part No.1 gal. (3.78 liters) C042285 gal. (18.93 liters) C0420555 gal. (208 liters) C04255
HAND CLEANER TOWELSLPS
522 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
The one-step waterless hand cleaner towel with proven pumice performance does it all.
Powerful cleaning agents work together with an absorbant, non-scratching hand cleaning towel. Theresult is hands which are clean, protected, and residue free
WorkPlaceHand Cleaner Towels
• Fast acting• Disposable• Portable• Premoistened• Residue free• Non-scratching abrasive• Pleasant fragrance
Boiling Point: 212°F (100°C)Vapor Density: Greater than oneSpecific Gravity: 0.97VOC: 110 g/LpH: 7.5 ± 0.5Appearance and Odor: Opaque white liquid with a fresh
citrus scent saturated onto towelsFlash Point: None to boiling (TCC)
Workplace Hand Cleaner Towelsreduce downtime with convenient,waterless hand cleaning at theworkstation.
Size Part No.Bucket of 72 Towels C09200
CORROSION INHIBITORS
523Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
ZIP-CHEM
D-5010 NS AEROSOLZC-010 BULK
Small PartsD-5010 NS is a powerful penetrating oiland corrosion inhibitor formulated foraircraft use. D-5010 NS dissolves rust,disperses water and leaves a thinprotective film that resists corrosion, lightacids, and alkali solutions. D-5010 NS iswidely used on small parts, in enginerepair and to protect tools and equipment.It will not harm paints, plastics, rubber orplated surfaces.
SPECS:MIL-C-23411-Ships (superceded)
D-5026 NS AEROSOLZC-026 BULK
Avionics, CablesD-5026 NS is a concentrated version of D-5010 NS designed for medium duty use oncritical metal surfaces in electronicassemblies and on electrical andmechanical cables. It is an effectivecorrosion inhibitor and water dispersant forlarger surfaces and retains the lubricatingcharacteristics of D-5015 NS.
SPECS:QPL BMS 3-29Type II Class 2 (aerosol)DPM-5707-1 (aerosol)Type II Class 1 (bulk)SIKORSKY SS 8536 Type I
Cor-Ban 27L BULKCor-Ban 22 AEROSOL
Static Joints, SubstratesCor-Ban 27L is a non-drying CIC, effectivein a wide range of temperatures. Itdevelops a thixotropic, buff colored filmthat will withstand UV exposure in highlycorrosive environments. It is free ofchromates and other hazardous materials.Uses include floor beams, antenna, seattracks, lavatory and the galley.
SPECS:QPL BMS 3-38
DPM 6210NSN 6850-01-0469-7645 (quart)
D-5015 NS AEROSOLZC-015 BULK
Avionics, ElectronicsD-5015 NS is a light lubricant that forms asoft, ultra thin protective film to preventcorrosion and disperse water. It is forshort-term use on critical metal surfaces inavionics, electrical and electroniccomponents. D-5015 NS is safe for use onmost paints, plastics and insulation.
SPECS:QPL MIL-C-81309EType III Class 2 (aerosol)Type III Class 1 (bulk)SIKORSKY SS 8536 Type 1
D-5023 NS AEROSOLZC-023 BULK
Structural ComponentsD-5023 NS is a super penetrating, waterdisplacing CIC. It features low film build-up, a high solids formulation and is tackfree. Applications include stringers,profiles, ribs, cavities, seat rails,longerones, wide and narrow box sections,broad surface cargo holds, lav and galleysub-sections. D-5023 NS is touch dry inone hour.
SPECS:QPL BMS 3-23 G Type II Class 2
D-5082 NS AEROSOLZC-082 BULK
Long Term Storage, Self-HealingD-5082 NS is a corrosion preventative foraircraft cables and out-of-service aircraftsuch as HMCs. It is self-healing, featuresa flexible petroleum base and is easilyremoved with common solvents. Partscoated with D-5082 NS will stand up tooutdoor exposure for two years.
SPECS:OIL 4501-11SC
Cor-Ban 35 AEROSOL, BULK
Aircraft SubstratedCor-Ban 35 is a long lasting, high solidsand low VOC CIC with high penetrationcapability and water displacing properties.Applied in a 1.5 to 2 mil wet film thicknessit dries in less than one hour to a non-tacky, salmon pink color. Cor-Ban 35incorperates the best features of BMS 3-23 and BMS 3-29 approved products.
SPECS:QPL BMS 3-35CMS 565-06 Type IINSN 6850-01-492-2932 (undyed)SIKORSKY SS 8536 Type IIGulfstream GAC115ADAIRBUS 0908-001 Type I Grade 3
0908-002 Type II Grade 20908-003 Type III Grade 2
MIL-PRF-16173 Grade 4 (pending)
D-5029 NS AEROSOLZC-029 BULK
Heavy Duty, Long TermCICD-5029 NS is a one step, high penetrantCIC for long term use on all metal surfacescommon in aerospace. The product is forairframe surfaces where corrosion is ahigh profile concern. D-5029 NS willreplace many duplex systemsrecommended by manufacturers. Itfeatures a fast dry time, reduced VOC’s,high solids, low weight and dries tack free.
SPECS:QPL BMS 3-29DMS 2150A Ty1 and 2
Cor-Ban 33
Penetrating, Self-HealingCor-Ban is a CIC for use when maximumpenetration between surfaces ismandated. It develops a thin, self-healingfilm quickly and is immediately detectable.Used on cables, seat tracks, fayingsurfaces, galley and lavatory structures.
SPECS:QPL BMS 3-23 (pending)Type II, Class I (pending)
COR-BANZIP-CHEM
524 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
CORROSION INHIBITING COMPOUNDS
ELECTRONICS, AVIONICS,ANTENNA & CABLES
D-5015 NSD-5026 NSCor-Ban 27LCor-Ban 33
WING SECTION & WHEELWELLS
D-5023 NSD-5029 NSD-5082 NSCor-Ban 23Cor-Ban 33Cor-Ban 35
ENGINE & SMALLPARTS
D-5010 NSCor-Ban 33
LAVATORY & GALLEY
D-5029 NSCor-Ban 27LCor-Ban 33Cor-Ban 35
STRUCTURALCOMPONENTS
D-5023 NSD-5029 NSCor-Ban 23Cor-Ban 27LCor-Ban 33Cor-Ban 35
SEAT TRACKS, FLOORBEAMS, DOORS &HATCHES
D-5015 NSD-5026 NSD-5029 NSCor-Ban 27LCor-Ban 33Cor-Ban 35
TAIL SECTIONSTRUCTURES
D-5023 NSD-5029 NSD-5082 NSCor-Ban 23Cor-Ban 33Cor-Ban 35
AERO-LUBE
525Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
ZIP-CHEM
D-5100 NS AEROSOLZC-100 BULK
Pure Silicone LubricateDissimilar Metals andPlasticsD-5100 NS pure silicone lubricant is widelyused to reduce friction between dissimilarmetals, plastics and plastic/metalcombinations. It also prevents freezing ofdoor locks and rubber weather-stripping.D-5100 NS operates in a temperaturerange of -60° to 600°F.
SPECS:MIL-S-21568 A
D-5330 NS AEROSOLZC-330 BULK
High Temp Areas, ThrustReverser Lube, Moly OilLubeD-5330 NS is a highly effective lubricantand penetrant for use where hightemperatures and friction are present. UseD-5330 NS on reciprocating parts, pistons,and manifold valves. D-5030 NS has littleor no effect on plastics or rubber.
SPECS:DPM-5249LUB-4503-25CApproved Thrust Reverser Lubricant:Pratt and Whitney, General Electric
D-5480 NS AEROSOLZC-480 BULK
Dry Film Lubricant,Graphite Dry LubeD-5480 NS contains no grease, wax orsilicone and provides a dry film lubricantstable at temperatures of up to 400°F.D-5480 NS has excellent electricalproperties for plating non-conductors. Witha fine particulate size graphite, it is wellsuited for use on small, precision parts.
SPECS:LUB 4500-35C
D-5261 NS AEROSOLZC-261 BULK
Cables, Flight Controls,Hinges and JointsLubricant/PenetratingD-5261 NS is a specially formulatedcleaning lubricant and solvent that willpenetrate to the heart strand of cables andother tight parts. Short-term corrosionprotection is also provided. For use onflight control, engine and landing gearcables, pressure seals; hinges, joints andpulleys.
SPECS:MIL-PRF-7870C
D-5263 NS AEROSOLZC-5263 BULK
Cable Cleaner andLubricantD-5263 NS is a special blend of oilsformulated for cable applications. D-5263NS has excellent water dispersing qualitiesand is an excellent rust preventative forgeneral aviation use on precision-machined parts. D-5263 NS is also usedto clean pylon bearing before relubricationand for cargo door lubrication.
SPECS:MIL-PRF-32033OIL 4501-125CDPM-5481-1
D-5460 NS AEROSOLZC-460 BULK
Engines, High TempAreas, Moly Dry LubeD-5460 NS provides a dry film lubricantthat is non-flammable, with excellent hightemperature stability to 660°F. D-5460 NSwas originally formulated to lubricate flaptrack fairings on the DC-8. It is alsoeffective in engine applications includingfan rotor assemblies, and fan reverser pre-cool duct seals. D-5460 NS has strongadhesion qualities and dries fast.
SPECS:GEAE DFO-A50TF192-6LUB 4500-12SC
D-5920 NS AEROSOLZC-920 BULK
Ice Release, RubberInsulation, SealsD-5920 NS is a silicone based specialgrease formulated to coat ruber insulationand seals. It prevents absorption orpenetration of water, which may freeze.Use D-5920 NS around cargo andpassenger doors, radome seals and otherrubber-to-metal joints subject to freezing.
SPECS:UAL-AGE-3020-SC
D-5440 NS AEROSOLZC-440 BULK
Teflon Dry Film LubricantD-5440 NS is a fluorocarbon dry filmlubricant that can withstand temperaturesfrom the cryogenic range to over 500°F. Ithas excellent anti-stick properties, will notstain or rust and is chemically inert.
SPECS:DPM-3493DMS-1762 Ty 7E
D-5907 NS AEROSOL
Multi-Purpose Grease,M.P. Aircraft GreaseD-5907 NS is Aeroshell 7 in an aerosol.The aerosol application allows for preciseproduct application and minimizes wasteand build-up in use. D-5907 NS is non-toxic, non-flamable and has excellentcorrosion inhibiting and oxidation resistantproperties. D-5907 NS is highly resistant torubbing and wiping.
SPECS:MIL-PRF-23827CGRE-4500-3SC
AERO-LUBEZIP-CHEM
526 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
ENGINE & HIGHTEMP AREAS
D-5330 NSD-5440 NSD-5460 NS
CABLES, FLIGHTCONTROLS, HINGES& JOINTS
D-5261 NSD-5263 NSD-5280 NS
GENERALPURPOSEAIRFRAMELUBRICANT
D-5067 NSD-5082 NS
DOORS, LOCKS &WEATHER-STRIPPING
D-5100 NSD-5261 NSD-5263 NSD-5920 NS
LUBRICANTS & LUBRICATING COMPOUNDS
527Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
ZIP-CHEM
INTRODUCINGSur-Prep™
Avionics Surface PrepCleanersZip-Chem will soon introduce a completenew line of avionics surface prep cleaners- Sur-Prep. Our first product Sup-Prep LVPis listed below. Soon to follow will be Sur-Prep 40™, Sur-Prep 49™ and Sur-Prep70™. Each new product will offer specificperformance advantages in cleaningefficiency, flammabilitiy, VOC’s and cost.As with all Zip-Chem aviation products,Sur-Prep will meet or exceed applicablemanufacturer’s, military or maintenancespecifications. Check our web site for thelatest information - www.zipchem.com
D-5603 NS AEROSOL
Electro-Freeze, ODC FreeD-5603 NS is an effective aid in locatingdefective components in electrical andavionics circuitry. Environmentallyacceptable and ozone safe, D-5603 NScan also prevent heat transfer duringsoldering. It is non-flammable and containsno ozone depleting compounds.
SPECS:Air Standard 700-83
D-5665 NS AEROSOL, TOWLETTES
ZC-665 BULK
Zero ODPContact CleanerD-5665 NS exhibits zero ozone depletion,total non-flammability and is a safe andeffective cleaning agent. It is extremelyuseful in and around activated circuitswhere flushing and fast drying areessential. D5665 NS will solubilize andremove tough fluorinated greases, yet itreleases zero VOCs.
Sur-Prep LVP AEROSOLBULK
Low Vapor PressureCleaning CompoundSur-Prep LVP is effective on organic andinorganic contaminants. It is used to prepcritical surfaces before painting andbonding. Sur-Prep helps coatings andsealants adhere to aircraft substrates byremoving a broad range of contaminants.Pre-test before use on plastics.
SPECS:MCS 6000 Type II, Class A
D-5600 NS AEROSOLZC-600 BULK, TOWLETTES
Surface Prep, MechanicalParts CleanerD-5600 NS is an all-natural surface prepwipe-down cleaner that has gained wideacceptance in the aviation industry. It is anenvironmentally acceptable alternate tomany cleaners and solvents on the markettoday. D-5600 NS contains no petroleumdistillates, is completely biodegradable andhas no known toxic properties.
SPECS:BAC 5000BAC 5750BAC 5504
D-5652 AEROSOL,TOWLETTES
Precision Contact CleanerD-5652 is formulated to offer a selectivebut wide range of solvency for use inactivated circuits and sensitive plasticcomponents. D-5652 exhibits an extremelylow level of ODP, approximately 0.03. Ithas a very low surface tension andsolubilizes fluorinated and perfluorinatedgreases. Cleaning APU components,bearing and oxygen system equipment issafe and easy with D-5652.
D-5695 NS AEROSOLTOWLETTES
ZC-695 BULK
Economical ContactCleanerD-5695 cleans mission-critical electricalconnectors in fire detection systems. Theproduct delivers an uncontaminated, ultrafiltered stream of methanol to the exactarea desired. D-5695 is also for generalcleaning of hermetic connectors, PCboards and miscellaneous parts.
D-5605 NS AEROSOL
Precision InstrumentDust RemovalD-5605 NS uses non-ozone depletingcompounds to generate a highly filteredstream of dry air for cleaning. D5605 NSeffectively removes dust and othercontaminants from precision parts andinstruments. Pressurized to 120 PSI, theaerosol is moisture-low for truly cleancontacts and assembly.
SPECS:Air Standard 700-83
D-5671 NS AEROSOL,TOWLETTES
ZC-671 BULK
Zero ODP PrecisionContact CleanerD-5671 NS is an aggressive cleaner,effective on a wider range of soils, andcontaminants than its milder counter-part,D-5665 NS. It exhibits excellent surfacewetting and can be used around allavionics equipment. D-5671 NS is non-flammable and non-ozone depleting.
D-5640 NS AEROSOL,BULK
General PurposePrecision CleanerD-5640 NS is a fast drying generalpurpose cleaner that leaves no residueand contains no CFCs. It is for removal ofCICs, pre-cleaning before painting,equipment degreasing and parts washing.It is also used in pressure cleaning andhandwipe applications. D-5640 is free ofany materials on the EPA list of toxic /hazardous substances and isbiodegradable.
SPECS:D6-17487 Rev. LCSD #1ASTM F 945
SUR-PREPZIP-CHEM
528 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
AVIONICS,ELECTRONICS& CABLE
D-5603 NSD-5605 NSD-5641D-5645D-5665 NSD-5671 NS
SURFACE PREPARATION & AVIONICS CLEANERS
GENERALPURPOSESURFACE PREP
D-5600 NSD-5615 NSD-5640 NSD-5645
APU. BEARINGS &OXYGEN SYSTEMS
D-5652D-5665 NSD-5671 NSD-5695 NS
EXTERIOR AIRCRAFT CLEANERS
529Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
ZIP-CHEM
C-120 BULKCallaSolve 120 BULK
Heavy Duty EquipmentCleaningCallaSolve 120 is a water dilutable, D-Limonene based solvent emulsion cleaner.It is for heavy duty cleaning of aerospaceequipment including aircraft, groundequipment and AGE engines. CallaSolve120 is authorized for use on generalaircraft per T.o.-1C135(K) A-3-4 forcleaning.
SPECS:MIL-PRF-87937D Type 1
C-804 BULK
Cleaning and DegreasingCompoundC-804 is a cleaner used on heavy depositsof grease, oil, hydrlic fluid and carbon. Itseffective cleaning capability is matchedwith low toxicity in a neutral pH,biodegradable formulation. C-804 has noflash point and generates very little order.Use C-804 as a full aircraft wash and forinterior spot cleaning.
SPECS:MIL-PRF-87937D Ty IV
AN-2001P 5-GALLON PAILS,BULK
Exterior Drywash andPolishAN 2001P is recommended for cleaningand protecting all painted surfaces. AN 2001P includes UV absorbers toenhance the quality and durability ofaircraft surfaces. Apply with a mop or anystandard wax applicator.
SPECS:CSD #1Boeing D6-17487 Rev. LAMS 1650 B Types 1 and 2
C-301A BULK
Degreaser, Large SurfacesZip-Chem’s C-301A is for degreasing andcleaning large surface areas. C-301Afeatures a completely biodegradableformulation with no petroleum-basedsolvents. C-301A will not harm aluminum,magnesium, copper, steel or other metals.C-301A rinses easily and leaves noresidue.
SPECS:CSD-1AMS 1526-AAMS 1550-ABAC 5744
C-800 BULK
Exterior WashC-800 is a general-purpose exteriorcleaner formulated to meet US Air Forceand other specifications. This product iseffective in a wide range of concentrationsand is fully biodegradable. The material isauthorized for use in aqueous cleaning perT.O. 1-1-691 or T.O. 1C-135(K)A 3-4
SPECS:QPL Ref. SFTT-85-05MIL-PRF-87937D Type II
C-8050 BULK
Wheel Wells, Flat WellsC-8050 is a non-solvent, gel cleanerspecifically formulated for wheel wells andlanding gear. An alkaline, water-basedformulation. C-8050 provides longer dwelltime in critical cleaning areas and will helpmaintain surfaces that are oxide-free,clean and shiny.
SPECS:AMS 1533 CSD-1
Zip-Strip 125 AEROSOLBULK
Water Rinseable CICRemoverZip-Strip 125 is for the removal of wet,waxy, and/or dry film corrosion inhibitingcompounds (CICs). It can be rinsed withwater and is extremely effective againstMoS2 grease, hydraulic fluid, wax andcarbon deposits. Use throughout theaircraft without concern for damage topaint, sealant or acrylic surfaces.
SPECS:D6-17487 Rev N (Boeing)MIL-P-25690 Type CASTM F 519-93GAC115AD
C-805 BULK
Wheel Wells, Flap Wells,ExteriorCall 805 is a non-solvent cleanerformulated for use with your wind-foamingunit. The unthickened water-based productcan be foamed in place at a wide range ofdilutions. The foamed product allows fordwell time and and efficiency inapplication. It is designed for wheel wellsand low solids exterior cleaning.
SPECS:AMS 1533 CSD-1
Jet Bright 550
Exterior Drywash andPolishJet Bright 550 is a polishing paste used toclean and brighten bare aluminum. It canbe used to removed oxidation and brightenpainted surfaces as well. Jet Bright 550also includes UV absorbers for increasedquality and durability of aircraft surfaces. Itcan be applied with a mechanical buffer orby hand.
SPECS:CSD #1Boeing D6-17487 Rev. LAMS 1650 B Types 1 and 2
C-855 BULK
Heavy Duty Large SurfaceCleanerC-855 cleans large surface areas wherethe build-up of grease, oils and carbondeposits is particularly difficult. It is aversatile, water base cleaner, also suitableground equipment.
SPECS:MIL-C-85570, Type II
INTERIOR AIRCRAFT CLEANERSZIP-CHEM
530 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
AN-300 D BULK C-1000 BULK
Lavatory Deodorant, NonFormalinAN-300 D is a non-formalin based, non-toxic toilet deodorant. AN-300 D is safe forall toilet tanks and related equipment andis biodegradable.
SPECS:ASM 1476 A
Cleaner, Disinfectant,Deodorizer - Fungicide,Mildewstat, VirucideC-1000 is a broad-spectrum anti-microbialcleaner that will disinfect, sanitize anddeodorize hard, non-porous substrates. C-1000 also controls the growth of mold,mildew, and pathogenic fungi. It is anexcellent laundry and carpet sanitizer, witha lemon fragrance. As a virucide it iseffective against 9 contagious virusesincluding HIV and HBV
SPECS:EPA Reg. No. 61178-1EPA Est. No 67026-CA-1
C-1452 BULK
Concentrated Disinfectant,Hard Surface CleanerCalla 1452 is a neutral pH disinfectanteffective on a wide range of bacteria, fungiand viral pathogens. These include HIV1and 2, and Herpes Simplex. C-1452 is costeffective in large surface applications - in adilution rate of 4 ounces per gallon.
SPECS:AMS 1452 DisinfectantAMS 1530B Wipe-off CleanerEPA Reg. No. 1839-168-67026EPA Reg. No. 67026-CA-001
EcoTru® 1453 READY FOR USE
Disinfectant, Hard SurfaceCleanerEcoTru 1453 is a non-toxic disinfectanteffective against a broad range ofmicroorganisms, including hepatitis B & C,legionella pneumophila and HIV-1. It iscurrently the only EPA registered ToxCategory IV disinfectant. It has no harmfuldermal, ocular, inhalation, or ingestioneffects in use. EcoTru is non-corrosive,non-flammable, and may be disposed ofdirectly into waste systems.
SPECS:AMS 1453EPA Reg. No. 70791-1EPA Est. No. 67026-CA-001
C-296 BULK
Concentrated PartsCleanerCalla 296 is for use in aqueous partswashing cabinets. It is low foaming attemperatures as low as 130°F andremoves dirt and grease from parts withcycle times as low as 3 minutes.
SPECS:Source Control Drawing 9825019 Rev. CMIL-C-29602 except Section 3.7 (pH)T.O.-4B-1-32, 4S-1-182, 4W-1-61
C-301-A-Lemon BULK
Degreaser, LargeSurfacesC-301-A-Lemon degreaser is for cleaninglarge surface areas. It is biodegradablewith no petroleum-based solvents. It willnot harm aluminum, magnesium, copper,steel or other metal and rinses easily withno residue.
SPECS:CSD-1AMS 1526-AAMS 1550-A
X-410 Q SPRAY BOTTLE, BULK
Aeroclean 410QInterior CleanerX-410 Q cleans cabin interior surfaces,such as tray tables and overheadcompartments. This green biodegradablecleaner is lightly scented.
SPECS:CSD-1AMS 1550-AEPA Registration (pending)
X-405 SPRAY BOTTLE, BULK
Glass CleanerX-405 is a water based alkaline glass andtransparency cleaner, with no solvents. X-405 is non-toxic, non-flammable andbiodegradable. It is safe on aluminum,magnesium, structural metals, paintedsurfaces and acrylic plastics.
SPECS:AMS 1535CSD-1
X-200 12-OZ. PLASTIC BOTTLES
Gum and AdhesiveRemoverX-200 removes gum, adhesives, crayonmarks, lipstick, mascara, and tar fromcarpeting, upholstery, metal and plasticsurfaces. It leaves no residue.
SPECS:CSD-1Flame Retardant AMS 1630APoly Test per MIL-C-85570B
X-100 PUMP SPRAY, BULK
Odor NeutralizerOriginally developed to control fish oder incargo areas, X-100 is a powerfulneutralizing agent, effective on all stubbornodors in the aircraft. X-100 applicationsnow include the general cabin as well ascargo areas.
SPECS:CSD-1Flame Retardant AMS 1630APoly Test per MIL-C-85570B
ARDROX
531Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
CHEMTAL OAKITE
Aircraft Exterior Cleaners Product Form Application Concentration
Ardrox 180BH Aircraft and ground equipment alkaline cleaner. Envi ronmentally friendly, scented, streak-free rinsing. Meets Boeing, McDonnell Douglas and AMS requirements.
Liquid Spray, Brush 10-20%
Ardrox 1266 Thickened, non-chromated, acidic oxide and corrosion remover for aluminum aircraft . Produces a uniform matte finish. Meets AMS 1640 requirements.
Gel Spray Full strength
Ardrox 1900B Thickened general purpose alkaline ai rcraft and ground equipment cleaner. Environmentally friendly. Contains no phosphates or petroleum solvents. Streak -free rinsing. Meets Boeing, McDonnell Douglas and AMS requirements.
Gel Spray, Brush 10% to full strength
Ardrox 1900BL Thickened low foam version of Ardrox 1900B. Meets Boeing, McDonnell Douglas and AMS requirements.
Gel Spray, Brush 10% to full strength
Ardrox 2410B Heavy-duty, thickened alkaline cleaner and carbon remover. Effective on thrust reversers. Do not use on aluminu m. Meets AMS 1545 and 1640 requirements.
Gel Spray, Brush Full strength
Ardrox 6017 Cleaning/polishing compound specifically formulated for use on wet or dry surfaces. Safe to use on painted and unpainted metal surfaces. Meets Boeing, McDonnell Do uglas and AMS requirements.
Liquid Brush Full strength
Ardrox 6021 Multi-purpose phosphate and solvent free alkaline cleaner. Meets MIL-C-87937, Type III (Gel), Boeing, McDonnell Douglas and AMS requirements.
Gel Spray, Brush 10% to full strength
Ardrox 6085 Thickened phosphate and solvent free alkaline multi -purpose cleaner. Environmentally friendly and safe for all metals, plastics and painted surfaces. Meets Boeing, McDonnell Douglas and AMS requirements.
Gel Spray, Brush 10% to full strength
Ardrox 6440 Multi-purpose phosphate and solvent free alkaline cleaner. Meets MIL-C-87936, Boeing, McDonnell Douglas and AMS requirements.
Liquid Spray, Brush 10-30%
Aircraft Interior Cleaners
Product Form Application Concentration Ardrox 179R Blue, mildly lemon -scented alkaline cleaner for aircraft interior and general purpose cleaning. Meets Boeing, McDonnell Douglas and AMS requirements.
Liquid Spray, Wipe 10%
Ardrox 485R Low-foaming product developed for cleaning wool and other synthetic fiber carpets through a Hydro -Soil Extractor type cleaning machine. Meets Boeing, McDonnell Douglas and AMS requirements.
Liquid Spray 1-2%
Ardrox 1820 Concentrated cleaner and deodorizer that cleans a variety of surfaces including glass, plastic and metal. Also use for overnight toilet tank cleaning. Meets AMS 1550 requirements.
Liquid Spray, Wipe 2-10%
Ardrox 1820LF Non-foaming version of Ardrox 1820 for use in high pressure spray wash systems. Safe for use on glass, plastic and m etals. Meets AIvIS requirements.
Liquid Spray 2-10%
Ardrox 6076 Environmentally friendly maintenance solvent cleaner. Blend of natural citrus solvents, emulsifiers and surfactants. Removes gum, inks and other soils. Meets Boeing, McDonnell Douglas and AMS requirements.
Liquid Spray, Brush 4% to full strength
Ardrox 6077 Mildly alkaline product formulated specifically to safely clean aircraft windows. Blend of surfactants and isopropanol. Wax -free and non-corrosive. Meets Boeing, McDonnell Do uglas and AMS requirements.
Liquid Spray Full strength
ARDROXCHEMTAL OAKITE
532 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Solvent Cleaners Product Application Concentration
Ardrox 5515 Wipe solvent cleaner. Quick-drying; safe to use on ferrous and non-ferrous alloys. Wipe, Immersion Full strength
Ardrox 5529 NESHAP-free solvent. Good for cleaning paint spray guns and adhesive application equipment. Meets California South Coast Air Quality Management regulations and McDonnell Douglas DMS 2458 requirements.
Wipe, Immersion Full strength
Ardrox 5564 Non-chlorinated solvent. Good for cleaning paint spray guns and adhesive application equipment. Meets California South Coast Air Quality Management regulations, McDonnell Douglas DMS 2283 and DPM 8226 requirements.
Wipe, lmmersion Full strength
Ardrox 6076 Environmentally friendly maintenance solvent cleaner. Blend of natural citrus solvents, emulsifiers and surfactants. No petroleum based solvents. Meets Boeing, McDonnell Douglas and AMS requirements.
Spay, Brush 4% to full strength
Ardrox 6135 Thickened general purpose aircraft and ground equipment cleaner. Environmentally friendly, phosphate and petroleum solvent free. Meets Boeing and AMS 1533 requirements.
Wipe, Immersion Full strength
In-Process Cleaners
Product Form Appicatior Temp °F Bath Concentration
Ardrox 6333 Silicated, mildly alkaline general purpose oil, grease and carbon removal cleaner. Meets Boeing BAC 5749 General Electric, Pratt & Whitney and Rolls-Royce requirements.
Liquid Immersion 140-160 10-25%
Ardrox 6333A Silicated, mildly alkaline, low-foaming, multi-metal safe spray cleaner. Meets General Electric, Pratt & Whitney and Rolls-Royce requirements.
Liquid Spray 120-180 2-10%
Ardrox 6483 Lightly silicated mildly alkaline cleaner/rust preventative. Low foaming and suited for one-step cleaning. Meets Boeing BAC 5763 and BAC 5749.
Liquid Spray 90-150 10-20%
Ardrox 6471 Silicated, heavy-duty, cleaner. Removes difficult soils in an agitated immersion tank. Meets Boeing BAC 5749.
Liquid Immersion 130-180 8-12%
InproClean 3000 Silicated alkaline cleaner. Removes typical fabrication soils. Meets Boeing BAC 5749.
Liquid Immersion 140-180 5-10%
InproClean 5000 Silicated mildly alkaline cleaner for aluminum and clad aluminum. Meets Boeing BAC 5763.
Liquid Immersion 140-180 5-10%
Oakite 61B Silicated immersion cleaner. Removes typical fabrication soils. Meets Boeing BAC 5749.
Powder Immersion 160-190 3-8 oz/gal
Oakite 90 Heavy-duty alkaline electrocleaner for steel. Do not use on aluminum or magnesium. Meets Boeing BAC 5749.
Powder Immersion 140-190 5-12 oz/gal
ARDROX
533Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
CHEMTAL OAKITE
Paint Strippers Product Application Temp °F Concentration
Ardrox 2302 Diphase, hot bath, heavy-duty paint and carbon remover. Upper phase is an oil sea, lower phase is a blend of alkali and solvent. Non-methylene chloride.
Immersion Up to 210 Full strength
Ardrox 2320 Alkaline paint and carbon remover. Diphase blend of solvents, activators and corrosion inhibitors. Ideal for removing organic paint finishes. Meets Boeing requirements.
Immersion 140-150 Full strength
Ardrox 2608 Thickened, solvent, acid-based paint stripper. Contains methylene chloride. Do not use on magnesium. Meets AMS 1376 requirements.
Brush, Spray Ambient Full strength
Ardrox 2814 Thickened, non-methylene chloride, acid-based paint stripper. Do not use on magnesium.
Brush, Spray Ambient Full strength
Ardrox 2865 Thickened, non-methylene chloride neutral paint stripper for vertical surfaces.
Brush, Spray Ambient Full strength
Ardrox 3000-W Thickened, non-flammable paint stripper which effectively removes epoxy, polyurethane and similar organic coatings from metal surfaces. Contains methylene chloride and phenol. Meets MIL-R-81294 Type 1 Class 1.
Brush, Spray Ambient Full strength
Gardostrip Q 7900A Non-phenolic, non-chlorinated solvent, acidic immersion paint stripper. Do not use on aluminum or titanium.
Immersion Ambient Full strength
Temporary Protective Coatings
Product Form Recommended Dry Film Thickness Drying Time
Ardrox 306N Water-based acrylic, transparent green, temporary protective coating for aluminum. Cures rapidly at ambient temperatures, has excellent resistance to blocking and is easily removed by Ardrox 7050W. Meets Boeing BAC 5034-1 and BMS 15-12 Type I Class 2.
Liquid 1.5 + 0.5 mil > 3 hours
Ardrox 321N Water-based acrylic, transparent green, temporary protective coating for aluminum. Cures rapidly at ambient temperatures, has excellent resistance to blocking and is easily removed by Ardrox 7050W. Meets Boeing BAC 5034-1 and BMS 15-12 Type I Class 3.
Liquid 1.0 – 2.0 mil 3-4 hours
Ardrox 345N Solvent-based, aerosol-applied, acrylic which cures at ambient temperature. Can be used as a touch-up material for Ardrox 306N and Ardrox 321N. Meets Boeing BMS 15-12 Type I Class 4.
Liquid 1.0 mil 45 minutes
Temporary Protective Coating Removers
Product Form Application Ardrox 6008 Thickened alkaline cleaner specifically formulated to remove temporary protective coatings from metal surfaces. Non-ammoniated, environmentally friendly. Meets Boeing BMS 15-12 Type II Class 2.
Liquid Spray, Brush
Ardrox 7050W Thickened alkaline cleaner specifically formulated to remove temporary protective coatings from metal surfaces. Non-ammoniated, environmentally friendly. Meets McDonnell Douglas DPM 5901-1.
Liquid Spray, Brush
ARDROX/DINITROLCHEMTAL OAKITE
534 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Corrosion Inhibiting Compounds Product Application Film Type Protection
Ardrox AV 8 / Dinitrol AV 8 Super-penetrating, water displacing, corrosion inhibiting compound. Leaves a tack-free, firm film. Meets Boeing BMS 3-23 Type II, Airbus TN 007.10138 Type I Grade 3, Bombardier CMS 565-06 Type I, McDonnell Douglas DMS 2150 and MIL-C-1617 Grade 1.
Spray, Brush
Tack-free and firm 8 microns (0.3 mils) 3 to 5 years
Ardrox AV 15 / Dinitrol AV 15 Super-penetrating, water displacing, corrosion inhibiting compound. Leaves a tack-free, firm film. Meets Boeing BMS 3-35 Type II and BMS 3-29, Airbus TN 007.10138 Type I Grade 2, Bombardier CMS 565-06 Type 4, McDonnell Douglas DMS 2150 and MIL-C-16173 Grade 1.
Spray, Brush
15 microns (0.6 mils) Tack-free and firm Up to 5 years
Ardrox AV 25 / Dinitrol AV 25 Penetrating and water displacing all purpose corrosion inhibiting compound. Leaves a soft waxy film. Meets Boeing BMS 3-26 Type I, Airbus TN 007.10138 Type I Grade 2, McDonnell Douglas DMS 2150 and MIL-C-16173 Grade 3.
Spray, Brush
25 microns (1.2 mils) Waxy and firm Up to 3 years
Ardrox AV 30 / Dinitrol AV 30 Penetrating and water displacing corrosion inhibiting compound. Leaves a tack-free waxy film. Meets Boeing BMS 3-29, Airbus TN 007.10138 Type II Grade 2, Bombardier CMS 565-06 Type and MIL-C-16173 Grade 4.
Spray, Brush
30 microns (1.2 mils) Waxy and firm Up to 4 years
Ardrox AV 40 / DinitroI AV 40 Heat resistant colorless corrosion inhibiting compound. Leaves a firm film. Ideal for areas exposed to high-temperatures.
Spray, Brush
40 microns (1.6 mils) Dry and firm Up to 3 years
Ardrox AV 100D / Dinitrol AV 100D Heavy-duty corrosion inhibiting compound. Leaves a firm waxy film. Meets Airbus TN 007.10138 Type II Grade 2 and Boeing BMS 3-26 Type II.
Spray, Brush
100 microns (4 mils) Waxy and firm Up to 5 years
Ardrox 3961 Blend of surfactants, corrosion inhibitors and oil in a petroleum based solvent. Has excellent dewatering and penetrating properties. Leaves a thin protective film. Meets MIL-C-23411 and General Electric, Pratt & Whitney and Rolls-Royce requirements.
Spray, Immersion
4 microns (0.16 mils) Oily and thin 3 months
Ardrox 3962 Mobile cleaner that completely displaces fresh or salt water from metal surfaces. Leaves a thin protective film. Meets General Electric, Pratt & Whitney and Rolls-Royce requirements.
Spray, Immersion
4 microns (0.16 mils) Oily and thin
1 to 2 months
Corrosion Inhibiting Compound Removers
Product Form Application Concentration Ardrox 5410 General airframe maintenance cleaner and CIC remover that removes oil, grease, and wax. Blend of alpha-olefins and surfactants. Meets Boeing requirements.
Liquid Spray, Wipe Full strength
Ardrox 6135 Thickened general purpose aircraft and ground equipment cleaner. Environmentally friendly. Phosphates and petroleum solvent free. Meets Boeing and AMS requirements.
Liquid Spray, Wipe Full strength
Ardrox AV 980 / Dinitrol AV 980 Neutral general purpose airframe cleaner. Environmentally friendly. Removes aged corrosion inhibiting as well as grease and oil. Meets Boeing and AMS requirements.
Liquid Spray, Wipe Full strength
Ardrox AV 990 / Dinitrol AV 990 Thickened multi-purpose cleaner. Environmentally friendly, phosphate and solvent free. Meets Boeing and AMS requirements.
Liquid Spray, Wipe Full strength
ARDROX
535Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
CHEMTAL OAKITE
Aluminum Etchants Product Form Application Temp °F Bath Concentration
Etchant A 45 Alkaline etchant for aluminum, used before conversion coating, anodizing, and other processing that requires metal removal.
Liquid Spray, Immersion 100-160 4-6%
Gardacid P 4442 Acid cleaner and etchant for aluminum. Liquid Spray, Immersion 100-160 5-20%
Oakite 160 Alkaline etchant. Meets Boeing BAC 5786 requirements.
Powder Immersion 100-160 2-6 oz/gal
Oakite 31 Acidic etchant for aluminum and its alloys. Meets MIL-C-10578 Type V and Pratt & Whitney PMC 6700-1.
Liquid Immersion 80-160 5-50%
Oakite 33 Acidic cleaner and etchant for aluminum. Meets MIL-C-10578 Type I requirements.
Liquid Immersion 80-160 5-50%
Aluminum Deoxidizers
Product Form Application Temp °F Bath Concentration Ardrox 295G Chromium-free deoxidizer/desmutter. Meets Boeing BAC 5765 requirements.
Liquid Immersion Ambient-100 15-20%
Deoxidizer LNC Chromium-free deoxidizer. Meets Boeing BAC 5765 requirements.
Liquid Spray, Immersion 100-110 10-20%
Deoxidizer 231 Chromium-free deoxidizer. Exhibits increased etch rates in comparison to Deoxidizer LNC. Works especially well on aluminum castings. Meets Boeing BAC 5765 requirements.
Liquid Immersion 60-100 25-30%
Deoxidizer 34 Chromate deoxidizer. Meets Boeing BAC 5765 requirements.
Powder Immersion Ambient-100 8-16 oz/gal
Chrome Conversion Coatings
Product Form Application Temp °F Bath Concentration Chromicoat L25 Only liquid ferricyanide-free chrome conversion coating for the Aerospace industry. Replenish baths with Chromicoat T3. Meets Class 1A and Class 3 Form I Method C and Boeing BAC 5719.
Liquid Immersion 90-110 3-5%
Chromicoat L25 RTU Ready-to-use version of Chromicoat L25. Liquid Flow-On 70-100 Full strength
Chromicoat 103 Standard chrome conversion coating for the Aerospace industry. Meets MIL-C-5541 Class 1A Form II Method A & C and Class 3 Form II Method C.
Powder Spray, Immersion 90-110 1 oz/gal
Chromicoat 103 RTU Spray Ready-to-use version of Chromicoat 103. Specifically designed to chromate aircraft exterior surfaces prior to painting.
Liquid Flow-On 70-100 Full strength
Chromicoat CLR Chrome conversion coating to be used where low electrical resistance is required. Deposits a clear to light yellow coating on aluminum. Meets MIL-C-5541 Class 3 Form I Method C.
Liquid Immersion 75-85 6-8%
ARDROXCHEMTAL OAKITE
536 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Primary Cleaners* Product Form Application Temp °F Concentration
Ardrox 1900B Environmentally friendly, thickened alkaline cleaner. Liquid Spray, Brush
Immersion Ambient 120-130
NA 10-20%
Ardrox 2410B Heavy-duty, thickened, alkaline cleaner. Do not use on aluminum. Liquid Spray, Brush Ambient Full strength
Ardrox 6085 Environmentally friendly, thickened alkaline cleaner. Liquid Spray, Brush
Immersion Ambient 120-130
NA 10-20%
Overhaul Cleaners*
Product Form Application Temp °F Concentration Ardrox 185 Highly alkaline carbon, scale and rust remover. Do not use on aluminum or magnesium.
Powder Immersion 180-190 32-48 oz/gal
Ardrox 185L Liquid version of Ardrox 185. Liquid Immersion 180-190 35-50%
Ardrox 188 Alkaline, permanganate engine oxide, scale conditioner for hot-end parts. Do not use on aluminum, magnesium, or titanium.
Powder Immersion 200-2 10 22 oz/gal
Ardrox 188 RFU Ready to use version of Ardrox 188. Liquid Spray 180-200 Full strength
Ardrox 1618 Highly alkaline carbon, lead and rust remover. Particularly effective in removing carbon from oil lines in jet engines. Do not use on aluminum or magnesium.
Liquid Immersion 175-195 20-30%
Ardrox 1873A Organic acid-based oxide scale remover used with Ardrox 188 and Ardrox 188 RFU. Do not use on aluminum, magnesium, and titanium.
Liquid Immersion 175-185 20-25%
Ardrox 6333 Silicated, mildly alkaline general purpose oil, grease and carbon removal cleaner.
Liquid Immersion 140-160 10-25%
Ardrox 6333A Low silicated, mildly alkaline, low-foaming, multi-metal safe spray cleaner. Liquid Spray 150 2-10%
Ardrox 6376 Low silicated, alkaline heavy-duty grease and carbon removal cleaner. Liquid Immersion 140-160 20-30%
* All engine cleaning products are approved by General Electric, Pratt & Whitney and Rolls-Royce. Compressor Cleaners
Product Form Application Temp °F Concentration Ardrox 6367 Environmentaly friendly, midly alkaline, solvent-free cleaner that removes salt, atmospheric soils, oils and carbon during hot fired or crank soak washes. Meets Garrett Solar, General Electric, Pratt & Whitney, Rolls-Royce, SNECMA, Turbine and Turbomeca requirements.
Liquid Spray Ambient 20%
Ardrox 6375 Cleaner similar to Ardrox 6367. Meets MIL-PRF-85704 Type II, Type III and AMS 1551 Class 1.
Liquid Spray Ambient 20%
Ardrox 6377 Cleaner similar to Ardrox 6367. Meets General Electric MID-TD-0000-5 requirements.
Liquid Spray Ambient 20%
ARDROX
537Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
CHEMTAL OAKITE
PenetrantsType Classification Sensitivity Product Remover/Emulsifier Developer
Type 1, Fluorescent Water Washable Level 1 Ardrox 970P22 - Method A: Water- Method C: Ardrox 9PR50, Ardrox PR1
All developers except Ardrox 9D75
Level 1+ Ardrox P131E1
Level 2 Ardrox P133D
Level 2+ Ardrox 970P24
Level 2+ Ardrox P134E1
Level 3 Ardrox 970P25E2
Level 3+ Ardrox P6F41
Level 4 Ardrox P136E1
Post Emulsifiable Level 2 Ardrox 985P12 - Method B: Ardrox 9PR3- Method C: Ardrox 9PR50, Ardrox PR1- Method D: Ardrox 9PR12 (10% concentration)
All developers
Level 3 Ardrox 985P13
Level 4 Ardrox 985P142
Level 3+ Ardrox P7F31 - Method C: Ardrox 9PR50, Ardrox PR1- Method D: Ardrox E1 (10% concentration)
Type 2, Visible Water Washable NA Ardrox P6R2
Ardrox 9062- Method A: Water- Method C: Ardrox 9PR50, Ardrox PR1
Ardrox 9D1BArdrox NQ1
Post Emulsifiable NA Ardrox 9962 - Method C: Ardrox 9PR50, Ardrox PR1
PenetrantsRemoval Method Product
Method B: Post Emulsifiable, lipophilic Ardrox 9PR3
Method C: Solvent removable Ardrox 9PR502
Ardrox PR12
Method D: Post Emulsifiable, hydrophilic Ardrox 9PR12Ardrox E1
DevelopersForm Product
Form A: Dry powder Ardrox 9D4A
Form B: Water soluble Ardrox 9D75
Form C: Water suspendible Ardrox 9D76
Form D: Nonaqueous (solvent based) Ardrox 9D1B2
Ardrox NQ12
Form E: Nonaqueous (solvent based)
Liquid Penetrant Inspection RangeAll Ardrox products meet AMS 2644 requirements.
1 Volatile Organic Compound free (VOC-free) and Ozone Layer Depleting Substance free (OLDS-free) products. 2 Available in aerosols.
Inspection Description Product Form Bath Vehicle / Solvent Carrier
Fluorescent Ardrox 8800 Powder Ardrox Base Oil HF or Water & Ardrox 8771
Ardrox 8800A Aerosol Ardrox Base Oil HF
Ardrox 8800B Premixed Bath Ardrox Base Oil HF
Ardrox 8810 Powder Water
Ardrox 8810L Liquid Concentrate Water
Water Conditioner Ardrox 8771 Liquid Water
Visible Black Ardrox 800/3 Aerosol Ardrox Base Oil HF
White Background Ardrox 8901W Aerosol NA
Petroleum Bath Vehicle Ardrox Base Oil HF Liquid NA
Magnetic Particle Inspection RangeAll Ardrox products meet AMS and Military standards.
LUBRICANTS & COMPOUNDSDOW CORNING
538 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Exterior Sealants• 732 • 733 • 899• 3110 • 832
Airframe Lubrication• Pene-Lube• 4 • BG-20• 33 • 44• 316 • 1000• 111
Fuel/Oil ResistantSealants• 730• 94-003
Dow Corning® Aviation Materials
Ground Support Materials• DC metal protective coating• 1890 protective coating
Runway Repair Sealant• 888• 890 SL
Cabin Sealants• 732 • 899• 748 • 832
Non-corrosive ElectronicSealants• 899 • 748• 832 • 3110
Engine Sealants• 732 • 734• 736 • 3120
Engine Lubricants• G-n metal assembly paste• z Moly powder• 55 O-ring lubricant• 321 dry film lubricant• 340 heat sink compound• 1000• 111
Product Features
Dow Corning®G-n metal assembly paste
Running in lubricant, no burnishing required, used in threaded connections, heavy loads, press fits, plus general assembling. Service temp from 0-250°F. PWA 587, RR4/49. Container sizes: 20 gm, 2.8 oz, pint, 10 lb, 50 lb.
Dow Corning®Z Moly powder
Running in, press fittings, metal forming, ball and roller bearings. Lubricates at pressures up to 500,000 psi, -375 to 750°F. Mil-M-7866C, GE D6Y14.Container sizes: 10 oz, 50 lb.
Dow Corning®Pene-Lube
Liquid and aerosol, rust inhibitor, water repellant penetrating lubricant for loosening nuts, bolts, locks, hinges, rollers.Container sizes: 12 oz, 1 gal, 5 gal.
Dow Corning®4 electrical insulatingcompound
Lubricates switches, bulbs, ignition systems, electronic components. Mil-S-8660C.Container sizes: 5.3 oz, 8 lb, 40 lb, 440 lb.
Dow Corning®BG 20 high performancesynthetic grease
Fully synthetic grease, -50 to 360°F, for high temperature, extreme pressure, or high speed applications.Container sizes: 15 gm, 5.3 oz, 14.1 oz, 40 lb.
Dow Corning®33 extreme lowtemperature grease
Light and medium consistency, -100 to 400°F. Mil-G-46886 Type 1 and Type 2.Container sizes: 5.3 oz, 8 lb, 40 lb, 400 lb.
Dow Corning®44 high temperaturebearing grease
Lubricates bearings on small motors, moderately loaded ball bearings, plastic gears and cams. Mil-L-15719A.Container sizes: 5.3 oz, 8 lb, 40 lb, 400 lb.
Dow Corning®55 O-ring lubricant
Dynamic lubrication between rubber and metal parts, -94 to 400°F. GE D6A9.Container sizes: 14 gm, 5.3 oz, 8 lb, 400 lb.
Dow Corning®111 valve lubricant andsealant
Sealing and lubricating in vacuum and pressure systems, low volatility, non melting, chemical resistant.Container sizes: 6 gm, 5.3 oz, 14.1 oz, 8 lb.
Dow Corning®316 silicone release spray
Heat stable, food grade, low volatility up to 390°F, flash point above 600°F, good oxidation resistance, little affect on metals and plastics.Container sizes: 16 oz, 5 gal.
Dow Corning®321 dry film lubricant
Air dries in 5 minutes to touch, -325 to 842°F in absence of air, used in high temperature solenoids, linkage, hinge pins, splines, threaded connections and disconnects.PW HS 12558, RR 4/51. Container sizes: 11 oz, 1 gal, 5 gal.
Dow Corning®340 heat sink compound
Greaselike, high thermal, conductivity, low bleed, does not harden, dry out, or melt. Mil-C-47113B, Mil-A-46146B, Type 4, PW HS12596, GE A15F2.Container sizes: 5 oz, 13.5 oz, 20 lb, 275 lb.
Dow Corning®1000 high temperatureanti-seize paste
Lubricating threaded connectors, service temperature -40 to 2100°F, protection against scaling and fretting corrosion, does not affect torque values.Container sizes: 20 gm, 1 lb, 5 gal.
Dow Corning® Aerospace Lubricants and Compounds
539Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
DOW CORNINGSEALANTS & PRIMERS
Product Features
Dow Corning®730 fluorosilicone oil/fuelresistant sealant
One-part sealant with excellent adhesion to most substrates, maintains good properties under exposure to fuels, oils, and solvents, wing box sealing, sealing in any areawhere resistance to oil, fuel, or solvents is required, acetic acid cure. DA4-653-352, deHavilland DHMS A6.15, DPM 3143, GE A15F21, RR 8146, GPS 3401-1.Container sizes: 3 oz, 4.7 oz, 5.75 oz.
Dow Corning®732 multi-purpose sealant
White, black, aluminum, and clear colours. Meets certain FDA and UL specifications. -68 to 392°F. Excellent adhesion to most substrates without primer. Galley sealing,sealing electrical leads, good all around sealant and insulator in areas not sensitive to acetic acid. Mil-A-46106B, GE A15F6, DA653-352, PWA 36029, DPM 5614-2, RR 872°, Garret GPS-3401-1, DSC-233-1, -2, -3. Container sizes: 3 oz, 4.7 oz, 10.3 oz, 4.5 gal.
Dow Corning®733 glass and metalsealant
One component, non-slumping ready to use sealant with superior adhesion to glass, metal and painted surfaces. Acetoxy cure, clear, white, black, grey colours, servicetemperature from -70° to 350°F (400° internmittent). New product - specifications pending.Container sizes: 10.3 oz, 4.5 gal.
Dow Corning®734 flowable sealant
White and clear colours, acetic acid cure, pourable, self leveling, meets certain FDA standards, good for form in place gaskets. Mil-A-46106B, Type II, PWA 36057, GEAF15F6, RR 843E.Container sizes: 3 oz, 10.3 oz, 4.5 gal.
Dow Corning®736 heat resistant sealant
Performs at -85 to 500°F continuous, 600°F intermittent exposure. General purpose high temperature gasketing and sealing. Mil-A-46016B, Type 1, DSC 233-4.Container sizes: 3 oz, 10.3 oz, 4.5 gal.
Dow Corning®748 non-corrosive sealant
UL listed, meets some FDA standards, good general purpose bonding and sealing where low odour and non-corrosive properties are required, such as electronics andservo motors, -67 to 350°F continuous, with 400°F for shorter periods.Container sizes: 3 oz, 10.3 oz, 4.5 gal.
Dow Corning®832 plant maintenancesealant
Non-corrosive, 1 part ready to use general purpose sealant, low odour, superior adhesion to most metals, glass and plastics. -67° to 300°F with intermittent to 350°F, inwhite, black and grey. Avoid skydrol exposure. New product - specifications pending.Container sizes: 10.3 oz, 4.5 gal.
Dow Corning®899 silicone glazing sealant
One-part, clear non-corrosive cure sealant with excellent weatherability, -80 to 400°F, excellent adhesion to glass, plastic, most metals. New product - specificationspending.Container sizes: 10.3 oz, 4.5 gal.
Dow Corning®3110 RTV silicone rubber
White, low viscosity 2 part with 2 types of curing agents to vary cure speed. Mixed 10:1. Good leveling compound around engines and struts. Use with 1200 or 1204primer for best adhesion. BAC 5432, BAC 5550.Container sizes: 1 lb, 9 lb, 40 lb.
Dow Corning®3120 RTV silicone rubber
Red, medium viscosity 2 part that cures to high strength, high durometer. Can be used as a sprayable insulation top coat. BMS 10-102, BAC 5892.Container sizes: 1 lb, 9 lb, 40 lb.
Dow Corning®P1200 prime coat
In clear and red. Improves adhesion of 1 part and 2 part RTV silicone rubbers especially to metal substrates; air dry, wipe on. DA4-653-3H2, BAC 5010, DPM 3202,A50TF35.Container sizes: 13.5 oz, 1 gal.
Dow Corning®1201 prime coat
Improves adhesion when 1200 is not adequate, recommended for 3110 and 3120.Container sizes: 13.5 oz, 1 gal.
Dow Corning®P1204 prime coat
Improves adhesion of RTV silicone rubbers, recommended for 738. JCM13156, A15F11, Mil-P-82797(05).Container sizes: 13.5 oz, 1 gal.
Dow Corning®1205 prime coat
Improves adhesion of silicone RTV, particularly to plastics. Recommended for 732, 734, 736, 738 and 1890 coating.Container sizes: 13.5 oz, 1 gal.
Dow Corning®94-003 fuel/oil resistantcoating
Fluorosilicone dispersion coating with excellent adhesion to most substrates even under exposure to fuels, oils and solvents. Can be used to protect sensitive parts suchas insulation on ducting, control corrosion in fuel tanks.Container sizes: 1 lb, 8 lb.
Dow Corning® Aerospace Sealants and Primers
DOW CORNING
540 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
CORROSION PROTECTION MATERIALS
Product Features
Dow Corning®metal protective coating
Extremely resistant to corrosive or salty environments, transparent, will not pick up dirt, good inherent lubrication properties. Can be used to protect stamped parts, tools,stored parts and equipment.Container sizes: 10 oz, 44 lb.
Dow Corning®1890 protective coating
Easy to apply silicone rubber dispersion, provides excellent moisture protection, resistant to sand, dust and dirt, applied by spraying or brushing, becomes tack free inminutes, forming rubbery overcoat. Can be used to protect electrical equipment, insulators, bus bars, plus truck cabs, insulators, trailers.Container sizes: 1 gal, 4.5 gal.
Dow Corning®888 silicone joint sealant
One-part, nonsag high elongation sealant, maintains good properties even after exposure to fuels, hydraulic fluids including Skydrol, Glycol; jet blast resistant; weatherresistant, wide service temperature, for sealing concrete to concrete joints, concrete airport aprons, runways and parking ramps.Container sizes: 29 oz, 4.5 gal.
Dow Corning®890-SL self-levelingsilicone joint sealant
One-part self leveling joint sealant for sealing asphalt, asphalt to concrete, and concrete to concrete; maintains good properties even after exposure to fuels, hydraulicfluids including Skydrol, Glycol; jet blast resistant, weather resistant, wide service temperature.Container sizes: 29 oz, 4.5 gal.
Dow Corning® Aerospace Corrosion Protection Materials and Runway Repair Sealants
Product Features
Dow Corning®3140 RTV coating
Clear, non-corrosive, self leveling. Solventless RTV coating for potting and protecting corrosion sensitive components, printed circuit boards, encapsulated small circuitsand connectors; Mil-A-46146 Type 2.
Dow Corning®3145 adhesive/sealant
Clear and grey 1 part, non-corrosive RTV cure, premium high strength aerospace sealant, -68 to 392°F clear, Gray is only one part Mil spec sealant qualified for -68 to500°F. For adhering corrosion sensitive components and electronics, good stress relief, use in any application where high strength and/or high temperature is involved,best around sealant. Mil-A-46146B group 2-clear, group 3 high temp-grey, Mil-R-47211, Type 3; DSC 233-5, BAC 5010; BAC 5550, JCM 13160; GE A15F15;GPS 3401-1, AL 23032388.
Dow Corning®90-006 aerospace sealant
Red in colour, non-flowable 2 part sealant with low thermal conductivity, available in different cure schedules, for thermal barrier, firewall applications, fairing andwindshield sealing; DMS 1799, RR 8/138, GPS 3401-1.
Dow Corning®93-006 aerospace sealant
Grey, 2 part sealant with different cure schedules, windshield sealant, fay surface sealant, form in place gaskets, corrosion protection even at high temperatures; BMS 5-54, BAC 5000; DPM 5697; RR 8/143.
Dow Corning®93-076 aerospace sealant
Gray, non-slumping 2 part with different cure schedules, low thermal conductivity, high bond strength, for thermal barrier and high temperature insulation; BAC 5010 type68, PWA 36047, Mil-C-82805(05).
Dow Corning® Aerospace Corrosion Protection Materials and Runway Repair Sealants
Product Features
Dow Corning®metal protective coating
Extremely resistant to corrosive or salty environments, transparent, will not pick up dirt, good inherent lubrication properties. Can be used to protect stamped parts, toolsstored parts and equipment. Container sizes: 10 oz, 44 lb.
Dow Corning®1890 protective coating
Easy to apply silicone rubber dispersion, provides excellent moisture protection, resistant to sand, dust and dirt, applied by spraying or brushing, becomes tack free inminutes, forming rubbery overcoat. Can be used to protect electrical equipment, insulators, bus bars, plus truck cabs, insulators, trailers.Container sizes: 1 gal, 4.5 gal.
Dow Corning®888 silicone joint sealant
One-part, nonsag high elongation sealant, maintains good properties even after exposure to fuels, hydraulic fluids including Skydrol, Glycol; jet blast resistant; weatherresistant, wide service temperature; for sealing concrete to concrete joints, concrete airport aprons, runways and parking ramps.Container sizes: 29 oz, 4.5 gal.
Dow Corning®890-SL self-levelingsilicone joint sealant
One-part self leveling joint sealant for sealing asphalt, asphalt to concrete, and concrete to concrete; maintains good properties even after exposure to fuels, hydraulicfluids including Skydrol, Glycol; jet blast resistant, weather resistant, wide service temperature.Container sizes: 29 oz, 4.5 gal.
Dow Corning® Aerospace Corrosion Protection Materials and Runway Repair Sealants
AL = Allison specificationBAC = Boeing specificationBMS = Boeing specificationDA = Airbus specification
DCS = DeHavilland specificationDPM = Douglas specificationGE = GE engine specificationGPS = Garret specification
JCM = Pratt and Whitney specificationPW = Pratt and Whitney engine specificationPWA = Pratt and Whitney specificationRR = Rolls Royce engine specification
SILICONES
541Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
GE
Aviation Product/Application Selector Guide
Applications
One-Component
RTV100Series RTV106 RTV116 RTV133 RTV142 RTV157
RTV159
RTV160 orRTV390Series
FRV1106
Exterior Cargo Door Seals X
Door Gasket Sealants X
Lighting Sealants X
Filleting Hardware Heads X
Joint Fill Compound X X X
Potting Landing Gear Electrical Devices
Sealant for Smooth Exterior Edgeof Aircraft Wing X
Weather Strip Adhesive X
Radome Sealing X X
Electronics Circuits and Terminal Protection X X
Cockpit Instrument Sealant X X
Electrical Wire Sealant X X X
Sealing, Potting and Encapsulating ComputerUnits X X
Electronics Power Equipment Encapsulant
Applications
Two-Component
RTV11RTV21RTV41
RTV60 RTV88 RTV560RTV566 RTV577 RTV6100
SeriesRTV8000
Series
Exterior Cargo Door Seals X
Door Gasket Sealants X
Lighting Sealants X X X
Filleting Hardware Heads X
Joint Fill Compound X
Potting Landing Gear Electrical Devices X
Sealant for Smooth Exterior Edgeof Aircraft Wing
Weather Strip Adhesive X
Radome Sealing X X X X X
Electronics Circuits and Terminal Protection X X X X X
Cockpit Instrument Sealant X X X X X
Electrical Wire Sealant
Sealing, Potting and Encapsulating Computer Units X X X X X
Electronics Power Equipment Encapsulant X
SILICONESGE
542 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Applications
One-Component
RTV100Series RTV106 RTV116 RTV133 RTV142 RTV157
RTV159
RTV160 orRTV390Series
FRV1106
Engine Gasketing X X X X X X
Heat Insulator/Thermal Blanket X X X X X
Heat Shielding X X X X X
Molded Seals X X X X X
Electronics Potting X X X X X
Gas Turbine Bracket Adhesive X
General Extreme High Temperature Potting andEncapsulating
Firewall Penetration Sealant X
Light Lens Sealant and Adherent X
Shock Absorber Between Metal Aircraft Parts
General Aircraft Maintenance Sealant X X
Applications
Two-Component
RTV11RTV21RTV41
RTV60 RTV88 RTV560RTV566 RTV577 RTV6100
SeriesRTV8000
Series
Engine Gasketing X X
Heat Insulator/Thermal Blanket X X
Heat Shielding X X
Molded Seals X X
Electronics Potting X X
Gas Turbine Bracket Adhesive
General Extreme High Temperature Potting andEncapsulating X X X
Firewall Penetration Sealant
Light Lens Sealant and Adherent
Shock Absorber Between Metal Aircraft PartsX X
General Aircraft Maintenance Sealant
Aviation Product/Application Selector Guide
SILICONES
543Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
GE
Applications
One-Component
RTV100Series RTV106 RTV116 RTV133 RTV142 RTV157
RTV159
RTV160 orRTV390Series
FRV1106
Wings/Fuel Electrical Devices Within Fuel Tank X
Fuel Cell Coating X
Fuel Tank Sealant X
Sealing Hydraulic Gear Boxes X
Sealing Hydraulic Switches and Controls X
Interior Electrical Box Sealant
Pre-formed Gaskets X
Galley Sealant X
In-Flight Entertainment Systems Sealant X
Lavatory Sealant X
Lighting Sealant X
Ventilation Duct Sealant X X X
Window Assembly Sealant X X X X
Miscellaneous Battery Sealant X
Black Box Gel Encapsulant
Charger Sealant X
Heating and Cooling Tube Sealant X
Landing Gear Sealant X
Thrust Reversers Heat Shielding
Thrust Reversers Insulator X
Thrust Reversers Vibration Dampening X
Applications
One-Component
RTV11RTV21RTV41
RTV60 RTV88 RTV560RTV566 RTV577 RTV6100
SeriesRTV8000
Series
Wings/Fuel Electrical Devices Within Fuel Tank
Fuel Cell Coating
Fuel Tank Sealant
Sealing Hydraulic Gear Boxes
Sealing Hydraulic Switches and Controls
Interior Electrical Box Sealant
Pre-formed Gaskets
Galley Sealant
In-Flight Entertainment Systems Sealant
Lavatory Sealant
Lighting Sealant
Ventilation Duct Sealant
Window Assembly Sealant Only RTV566
Miscellaneous Battery Sealant X X X X X
Black Box Gel Encapsulant X
Charger Sealant X X X X X
Heating and Cooling Tube Sealant
Landing Gear Sealant
Thrust Reversers Heat Shielding X X X
Thrust Reversers Insulator X X X
Thrust Reversers Vibration Dampening X X X X
Aviation Product/Application Selector Guide
SILICONESGE
544 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Superior Products for AviationOne-Component
•
•
•
•
•
•
•
The RTV100 series is GE Silicone’s premier line of high strength acetoxy-curesealants with FDA, UL, NSF, and USDA recognition, and meets MIL-A-46106specifications. This high performance line, in both paste and flowable grades, offersprimerless adhesion to many substrates. Both RTV160 and RTV116 are standardhigh temperature sealants.
RTV133 is a black, one-component adhesive sealant recommended whereresistance to burning of the finished product is a design consideration. It offers highstrength, primerless adhesion with an alkoxy cure. It has UL recognition.
RTV142 is a non-corrosive, low-outgassing paste adhesive sealant ideal forelectronic gasketing or vertical/overhead applications.
RTV157 and RTV159 are high strength, paste adhesive sealants with an acetoxycure. They offer high temperature and high strength performance.
The RTV160 series are non-corrosive to sensitive metals found in electronics. Thisseries offers products of varying consistencies, and all products in this series are ULrecognized component materials. RTV160 and RTV167 comply with MIL-A-46146.RTV167 is a high strength paste.
The TSE390 series incorporates a newly developed crosslinking chemistry and arenon-corrosive to metallic substrates. They are excellent choices forelectrical/electronics applications. This series offers products of differingconsistencies and it meets the corrosion resistant requirements of MIL-A-46146A.
The adhesive sealant FRV1106 is a paste consistency, fluid resistant productdesigned for use in fuel, solvent and chemical environments. This acetoxy-curesealant offers primerless adhesion, room temperature cure, and ozone resistance.
Two-Component
•
•
•
•
•
RTV11, RTV21 and RTV41 are three of GE Silicones’ general purpose two-partsilicones that are excellent choices for the aviation environment. They offer superioradhesion with primers and room temperature cure.
RTV60 and RTV88, part of GE Silicones’ high temperature two-part siliconematerials, differ primarily in viscosity in the uncured state. RTV60 is excellent forpotting and encapsulating applications, while RTV88 is ideal for vertical or overheadsurfaces.
RTV560/566 and RTV577 provide outstanding adhesion with a primer at lowtemperatures. All cure at room temperature and provide variable cure rates byadjusting the curing agent. RTV560/566 offers the widest useful temperature rangeof all GE silicones. RTV566 is an excellent choice for aviation applications requiringlow outgassing. RTV577 is a highly viscous and outstanding choice for sealing andinsulating on vertical and overhead surfaces.
The RTV6100 series, or silicone dielectric gels, are liquid silicones that cure to formsoft, gel-like elastomers. They help preserve dielectric integrity and provideoutstanding protection to delicate electronic assemblies in harsh environments. Theyoffer a variety of cure rates and primerless adhesion to most substrates. RTV6156provides low temperature performance.
The RTV8000 series is a general purpose two-part silicone rubber compound. Itconsists of pourable, non-corrosive grades with excellent adhesion and hightemperature performance. It conforms to the physical and electrical requirements ofMIL-PRF-23586F. (Supercedes MIL-S-23586E.)
Commercial Aircraft Solutions at WorkThese reliable aviation products find application in a multitude ofaspects of aircraft assembly and maintenance, from adhesion forwings and fuel tanks to electrical wire and everything in between.
1) Fuel Tank Sealant2) Fuel Cell Coating3) Vent Duct Sealant4) In-flight Entertainment System5) Overhead Bin Sealant6) Window Assembly Sealant7) Hydraulic Switch/Control Sealant8) Lighting Sealant9) Cargo Door Seal10) General Maintenance Sealant
11) Fuel Tank Electrical Device Sealant12) Hydraulic Gear Box Sealant13) Wing Edge Sealant14) Gas Turbine Bracket Adhesive15) Joint Fill Compound16) Filleting Hardware Heads17) Engine/Thermal Shield18) Engine Electronics Potting19) Engine Molded Seals20) Engine Gasket
21) Lighting Sealant22) Door Gasket Seal23) Electrical Wire Sealant24) Potting Landing Gear
Electrical Devices25) Lavatory Sealant26) Firewall Penetration Sealant27) Light Lens Sealant28) Cockpit Instrument Seal29) Black Box Encapsulant
30) Sealant Potting, and Encapsulant for Computer Units
31) Radome Sealant32) Weatherstrip Adhesive33) Electrical Box Sealant34) Formed Gaskets35) Galley Sealant
545Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
LOCTITEADHESIVESPr
oduc
t
Item
Num
ber
Cont
aine
r
Typi
cal
Use
Colo
ur
Gap
Fill
Cate
gory
Visc
osity
cP
Stre
ngth
(PSI
)*Te
nsile
Shea
r
Tem
p.Ra
nge
Cure
Spee
d**
Spec
ific
Grav
ity
Key
Spec
s.
380 380043805038061
3 gm tube1 oz. bottle1 lb. bottle
Close fittingparts
Black 0.006” ToughenedEthyl
200 3,750 -65°Fto
225°F
Fixture - 90 sec.Full - 24 hrs.
1.10 -
382 38203204203824038261
3 gm tube20 gm kit¹20 gm bottle1 lb. bottle
Tak Pak®Ultria-performancewire tacking
Clear 0.008” Generalpurpose Ethyl
5,000 3,200 -65°Fto
250°F
Fixture - 30 sec.Full - 24 hrs.
1.05 -
401WorldwideAvailability
401044014040161
3 gm tube1 oz. bottle1 lb. bottle
Generalpurpose
Clear 0.005” SurfaceinsensitiveEthyl
110 3,200 -65°Fto
180°F
Fixture - 15 sec.Full - 24 hrs.
1.05 Agriculture Canadaapproved
403 403044034040361
3 gm tube20 gm bottle1 lb. bottle
Gap filling Clear 0.008” Low odour/lowbloom Alkoxy
1,000 2,600 -65°Fto
225°F
Fixture - 50 sec.Full - 24 hrs.
1.10 -
404 465514654846561
1/3 oz. bottle4 oz. bottle1 lb. bottle
Rubber O-Ringbonder
Clear 0.005” Generalpurpose Ethyl
80 3,500 -65°Fto
160°F
Fixture - 30 sec.Full - 24 hrs.
1.09 Commercial itemstd. A-A-3097Type II, Class 2
406WorldwideAvailability
406044064040661
3 gm tube20 gm bottle1 lb. bottle
Wicking grade Clear 0.004” SurfaceinsensitiveEthyl
20 3,200 -65°Fto
180°F
Fixture - 15 sec.Full - 24 hrs.
1.05 Commercial itemstd. A-A-3097Type II, Class 1
408 4084040861
20 gm tube1 lb. bottle
Wicking grade Clear 0.002” Low odour/lowbloom Alkoxy
5 2,600 -65°F to180°F
Fixture - 50 sec.Full - 24 hrs.
1.05 -
409 4090421922409454097418030
3 gm tube10 gm syringe20 gm tube200 gm tube300 gm cartridge
GeneralPurpose geladhesive
Clear 0.010” Generalpurpose Ethyl
Gel 3,200 -65°Fto
225°F
Fixture - 75 sec.Full - 24 hrs.
1.10 -
410 410044104541061
3 gm tube20 gm bottle1 lb. bottle
Gap filling Black 0.008” ToughenedEthyl
3,500 3,200 -65°Fto
210°F
Fixture - 90 sec.Full - 24 hrs.
1.07 -
411 411044114541161
3 gm tube20 gm bottle1 lb. bottle
Clear Gapfilling
Clear 0.008” ToughenedEthyl
5,000 3,200 -65°Fto
180°F
Fixture - 30 sec.Full - 24 hrs.
1.07 -
412 4125041261
1 oz. bottle1 lb. bottle
Temporarybonding
Clear 0.002” Generalpurpose Ethyl
3 1,500 -65°Fto
180°F
Fixture - 15 sec.Full - 24 hrs.
1.05 -
414 414044145041461
3 gm tube1 oz. bottle1 lb. bottle
Plastic bonder Clear 0.006” Generalpurpose Ethyl
110 3,200 -65°Fto
180°F
Fixture - 20 sec.Full - 24 hrs.
1.05 Commercial itemstd. A-A-3097Type II, Class 2
415 4155041561
1 oz. bottle1 lb. bottle
Gap fillingmetal bonder
Clear 0.008” Generalpurpose Methyl
1,500 3,600 -65°Fto
180°F
Fixture - 30 sec.Full - 24 hrs.
1.09 Commercial itemstd. A-A-3097Type I, Class 3
416 4165041661
1 oz. bottle1 lb. bottle
Gap fillingplastic bonder
Clear 0.008” General purposeEthyl
1,500 3,200 -65°Fto
180°F
Fixture - 30 sec.Full - 24 hrs.
1.05 Commercial itemstd. A-A-3097Type II, Class 3
417 41750 1 oz. bottle Temporarybonding
Clear 0.002” Generalpurpose Ethyl
3 400 -65°Fto
180°F
Fixture - 90 sec.Full - 24 hrs.
1.05 -
420 4205042061
1 oz. bottle1 lb. bottle
Wicking typeplastic bonder
Clear 0.002” Generalpurpose Ethyl
2 2,900 -65°Fto
180°F
Fixture - 30 sec.Full - 24 hrs.
1.05 Commercial itemstd. A-A-3097Type II, Class 1
422 4225042261
1 oz. bottle1 lb. bottle
Gap fillingplastic bonder
Clear 0.008” Generalpurpose Ethyl
2,500 3,200 -65°Fto
180°F
Fixture - 20 sec.Full - 24 hrs.
1.09 Commercial itemstd. A-A-3097Type II, Class 3
426 21921183981745117529
10 gm syringe20 gm tube200 gm tube300 gm cartridge
Poroussurfaces
Black 0.010” ToughenedEthyl
Gel 3,000 -65°Fto
210°F
Fixture - 20 sec.Full - 24 hrs.
1.10 -
430 430044305043061
3 gm tube1 oz. bottle1 lb. bottle
Metal bonderfor close fittingparts
Clear 0.005” Generalpurpose Methyl
80 3,600 -65°Fto
180°F
Fixture - 30 sec.Full - 24 hrs.
1.09 Commercial itemstd. A-A-3097Type I, Class 2
1) Contains adhesive 382 (20 gm bottle), Accelerator 7452 (0.7 oz. net wt. aerosol can). * Grit blasted steel ** Varies with substrates A complete line of surface primers, accelerators and cleaners are available to further enhance theperformance of Loctite® Instant Adhesives. Refer to the Surface Preparation section.
LOCTITE
546 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
BONDING - CYANOACRYLATE ADHESIVESPr
oduc
t
Item
Num
ber
Cont
aine
r
Typi
cal U
se
Colo
ur
Gap
Fill
Cate
gory
Visc
osity
cP
Stre
ngth
(PSI
)Te
nsile
She
ar
Tem
p. R
ange
Cure
Spe
ed
Spec
ific
Grav
ity
Key
Spec
s.
444 122922041912294
20 gm bottle20 gm kit1 lb. bottle
Tak Pak®wire tackingadhesive
Clear 0.007” Generalpurpose Ethyl
700 3,200 -65°Fto
180°F
Fixture - 90 sec.Full - 24 hrs.
1.05 Commercial itemstd. A-A-3097Type II, Class 3
454 4540421925454404547445478
3 gm tube10 gm syringe20 gm tube200 gm tube300 gm cartridge
Poroussurfaces
Clear 0.010” SurfaceinsensitiveEthyl
Gel 3,200 -65°Fto
180°F
Fixture - 30 sec.Full - 24 hrs.
1.10 Agriculture Canadaapproved
455 2230917421
10 gm syringe200 gm tube
Poroussurfaces
Clear 0.010” Low odour/lowbloom Alkoxy
Gel 2,600 -65°Fto
160°F
Fixture - 15 sec.Full - 24 hrs.
1.10 -
460WorldwideAvailability
460044604046061
3 gm tube20 gm bottle1 lb. bottle
Close fittingparts
Clear 0.004” Low odour/lowbloom Alkoxy
45 2,600 -65°Fto
160°F
Fixture - 50 sec.Full - 24 hrs.
1.10 -
480WorldwideAvailability
4804048061
20 gm bottle1 lb. bottle
General filling Clear 0.006” ToughenedEthyl
300 3,800 -65°Fto
210°F
Fixture - 30 sec.Full - 24 hrs.
1.10 NSF/ANSI 61certified
493 4935049361
1 oz. bottle1 lb. bottle
Wicking typemetal bonder
Clear 0.002” Generalpurpose Ethyl
2 3,600 -65°Fto
180°F
Fixture - 15 sec.Full - 24 hrs.
1.09 Commercial itemstd. A-A-3097Type I, Class 1
495 49595
495044955049561
0.07 fl. oz.Gluematic® Pen3 gm tube1 oz. bottle1 lb. bottle
Generalpurpose
Clear 0.004” Generalpurpose Ethyl
45 2,750 -65°F to180°F
Fixture - 50 sec.Full - 24 hrs.
1.05 Commercial itemstd. A-A-3097Type II, Class 1
Prod
uct
Item
Num
ber
Cont
aine
r
Typi
cal U
se
Colo
ur
Gap
Fill
(Dia
met
er)
Visc
osity
cP
Stre
ngth
(PSI
)*Te
nsile
She
ar
Tem
p. R
ange
Cure
Spe
ed@
25°
C
Reco
mm
-en
ded
Prim
er
Spec
ific
Grav
ity
Key
Spec
s.
609 60905609216093160941
0.5 ml capsule10 ml bottle50 ml bottle250 ml bottle
1st generationto augmentpress fits
Green 0.005” 125 3,000 -65°Fto
300°F
Fixture - 10 min.Full - 24 hrs.
T 1.10 Mil-Spec (R-46082B) Type 1
620WorldwideAvailability
62005620156204022241
0.5 ml capsule10 ml bottle50 ml bottle250 ml bottle
For hightemperatureapplications
Green 0.015” 8,500/22,000Thixotropic
3,800 -65°Fto
450°F
Fixture - 1 hr.Full - 24 hrs.
N 1.16 -
641WorldwideAvailability
288022145828801
10 ml bottle50 ml bottle250 ml bottle
Mediumstrength forremovablebearings
Yellow 0.008” 525/1,950Thixotopric
1,700 -65°Fto
300°F
Fixture - 30 min.Full - 24 hrs.
N 1.07 -
648 214432144421445
10 ml bottle50 ml bottle250 ml bottle
Fast fixturingfor close liftingparts
Green 0.006” 500 3,900 -65°Fto
300°F
Fixture - 20 min.Full - 24 hrs.
N 1.13 -
675 67541 250 ml bottle 1st generationfor close liftingparts
Green 0.005” 125 3,000 -65°Fto
300°F
Fixture - 15 sec.Full - 24 hrs.
T 1.09 Mil-Spec (R-46082B) Type 1
680 68005680156803568060
0.5 ml capsule10 ml bottle50 ml bottle250 ml bottle
High strengthfor slip fittedparts
Green 0.015” 1,250 4,000 -65°Fto
300°F
Fixture - 10 min.Full - 24 hrs.
T NSF/ANSI 61certified
* Varies with substrates
RETAINING
547Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
LOCTITETHREADLOCKERSPr
oduc
t
Item
Num
ber
Cont
aine
r
Typi
cal U
se
Colo
ur
Visc
osity
cP
Torq
ue in
. lbs
.(M
10 S
teel
Nut
s&
Bolts
) Bre
ak/
Prev
ail
Tem
p. R
ange
Cure
Spe
ed@
25°
C
Oil T
oler
ant
Reco
mm
ende
dPr
imer
Spec
ific
Grav
ity
Key
Spec
s.
222WorldwideAvailability
21463214642146521466
10 ml bottle50 ml bottle250 ml bottle1 liter bottle
Small screwsunder 1/4”
Purple 1,200/5,000Thixotropic
53/30 -65°Fto
300°F
Fixture - 20 min.Full - 24 hrs.
- N or T 1.05 -
222MS 22205222212223122241
0.5 ml capsule10 ml bottle50 ml bottle250 ml bottle
Easy removalsmall screws
Purple 1,200/6,000Thixotropic
62/27 -65°Fto
300°F
Fixture - 20 min.Full - 24 hrs.
- N or T 1.05 Mil-Spec (S-46163A)Type II, Grade M
242® 2420524221242312424124243
0.5 ml capsule10 ml bottle50 ml bottle250 ml bottle1 liter bottle
Removablegrade up to3/4” bolts
Blue 1,200/6,000Thixotropic
115/53 -65°Fto
300°F
Fixture - 10 min.Full - 24 hrs.
- N or T 1.07 Mil-Spec (S-46163A)Type II, Grade M
NSF/ANSI 61 certified
243WorldwideAvailability
23977240772407824079
0.5 ml capsule10 ml bottle50 ml bottle250 ml bottle
Up to 3/4” boltswith light oilcontamination
Blue 2,250/6,000Thixotopric
180/62 -65°Fto
300°F
Fixture - 10 min.Full - 24 hrs.
Yes N or T 1.08 NSF/ANSI 61 certified
Agriculture Canadaapproved
246 29512295132951429515
0.5 ml capsule10 ml bottle50 ml bottle250 ml bottle
Hightemperaturemediumstrength
Blue 2,600 170/48 -65°Fto
450°F
Fixture - 7 min.Full - 24 hrs.
Yes N or T 1.15 -
262WorldwideAvailability
2620526221262312624126243
0.5 ml capsule10 ml bottle50 ml bottle250 ml bottle1 liter bottle
Permanentlocking up to3/4” bolts
Red 1,800/5,000Thixotropic
190/275 -65°Fto
300°F
Fixture - 20 min.Full - 24 hrs.
- N or T 1.05 Mil-Spec (S-46163A)Type II, Grade O
Agriculture Canadaapproved
271™ 27105277312774127743
0.5 ml capsule10 ml bottle50 ml bottle250 ml bottle
High strengthfor fasteners upto 1” diameter
Red 500 230/320 -65°Fto
300°F
Fixture - 10 min.Full - 24 hrs.
- N or T 1.12 Mil-Spec (S-46163A)Type II, Grade O
UL classified
277 21434277312774127743
10 ml bottle50 ml bottle250 ml bottle1 liter bottle
High strengthfor large bolts
Red 7,000 275/275 -65°Fto
300°F
Fixture - 30 min.Full - 24 hrs.
- N or T 1.12 Mil-Spec (S-46163A)Type I, Grade L
290WorldwideAvailability
2900529021290312904129043
0.5 ml capsule10 ml bottle50 ml bottle250 ml bottle1 liter bottle
Wicking grade forpreassembledparts
Green 12 85/250 -65°Fto
300°F
Fixture - 20 min.Full - 24 hrs.
- N or T 1.08 Mil-Spec (S-46163A)Type III, Grade R
NSF/ANSI 61 certified
425 4254042561
20 gm bottle1 lb. bottle
For smallplasticfasteners
Blue 60 5/4 -65°Fto
180°F
Fixture - 2 min.Full - 24 hrs.
- - 1.10 -
LOCTITE
548 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
HANDCLEANERS
Product Item Number Container
Fast Orange® Lotion HandCleaner (fine pumice formula)
251082511625217252182510425915
7.5 fl. oz. squeeze bottle15 fl. oz. squeeze bottle64 fl. oz bottle with pump1 gal. flat-top bottle1 gal. bottle with pump2x1 gal. bottle with pump
Trounce® Lotion HandCleaner with Pumice
2111621218
15 fl. oz. squeeze bottle128 fl. oz. bottle with pump
ANTI-SEIZES
Prod
uct
Item
Num
ber
Cont
aine
r
Tem
p.Re
sist
ance
Gene
ral
Purp
ose A
nti-
seize
Extre
me
Chem
ical
Resi
stan
ce
For m
axim
umLu
bric
ity
Elec
trica
llyCo
nduc
tive
For A
lum
inum
/So
ft M
etal
s
For S
tain
less
Stee
l
Copp
er-fr
eeFo
rmul
atio
n
For L
owSp
eeds
, Hig
hLo
ads
High
Pur
ity
C5-A® copperbasedanti-seize
51299512775100151002511445114751005510035100451006510075100851009510105101151146
2 gm pouch7 gm pouch1 oz. tube4 oz. tube4 oz. brush-top can8 oz. brush-top can10 oz. brush-top can12 oz. aerosol13 oz. cartridge1 lb. can1 lb. brush-top can2.5 lb. can8 lb. can25 lb. pail42 lb. pail425 lb. drum
1800°F(982°C)
P G G G
Nickel anti-seize
771245128651102771645115277175
8 oz. brush-top can13 oz. aerosol1 lb. can1 lb. brush-top can8 lb. can5 gal. pail
2400°F(1315°C)
P G G P
Silver gradeanti-seize
802097673276759767648020676775
4 oz. brush-top can8 oz. brush-top can13 oz. aerosol1 lb. brush-top can1 gal. can5 gal. pail
1600°F(871°C)
G G G G
Graphite - 50anti-seize
51084 1 lb. can 900°F(482°C) A G P P
Moly-50anti-seize
51094 1 lb. can 750°F(400°C) G P P G
Zincanti-seize
39901 1 lb. can 750°F(400°C) A P G
P = Preferred Choice G = Good Choice A = Acceptable Choice
549Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
LOCTITEGASKET SEALANTPr
oduc
t
Item
Num
ber
Cont
aine
r
Colo
ur
Oil R
esis
tanc
e
Non-
Corro
sive
Tem
p.Re
sist
ance
Seal
ing
Tim
e
Key
Spec
s.
Aviation GasketSealant
3051730516
0.25 pt. brush can1 pt. brush can
Dark red-dish brown
Oil Resistant Non-corrosive -65° to 400°F(-54° to 204°C)
Full strength - 12 hrs. Mil-S-45180 D Type III
Gasket Sealant#1
305103051130512
0.5 ml capsule10 ml bottle50 ml bottle250 ml bottle
Reddishbrown
Oil Resistant Non-corrosive -65° to 400°F(-54° to 204°C)
Full strength - 24 hrs. Mil-S-45180 D Type I
Gasket Sealant#2
30513305143051580964
0.5 ml capsule10 ml bottle50 ml bottle250 ml bottle1 liter bottle
Black Oil Resistant Non-corrosive -65° to 400°F(-54° to 204°C)
Remains tacky Mil-S-45180 D Type II
PRIMERS & ACTIVATORS
Prod
uct
Item
Num
ber
Cont
aine
r
Colo
ur
Visc
osity
(mPa
s)
Base
On-P
art L
ife
Dry
Tim
e
Appl
icat
ion
770 1839618397
1.75 fl. oz. bottle16 fl. oz. can
Colourless 1.25 Heptane 8 hrs. 30 sec. All cyanoacrylates
7471WorldwideAvailability
192672247719268
1.75 fl. oz. bottle4.5 oz aerosol can1 gallon can
Amber 2 Acetone/Isopropanol
7 days 30-70 sec. Anaerobics
7649WorldwideAvailability
19269213472134819266
1.75 fl. oz. bottle25 gm aerosol can4.5 oz. aerosol can1 gallon can
Clear/green
2 Acetone 30 days 30-70 sec. Anaerobics
Accelerators/Primers
Prod
uct
Item
Num
ber
Cont
aine
r
Colo
ur
Visc
osity
(mPa
s)
Base
On-P
art L
ife
Dry
Tim
e
Appl
icat
ion
7707075 2134922671
1 qt. can4.5 oz. aerosol can
Amber 2 Acetone 2 hrs. 3 minuntes 324,325
Activators
3M
550 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
ADHESIVES
Scotch-Grip™ and Fastbond™ High Performance Contact AdhesivesA complete line of high strength “contact” type adhesives with years of successful history in a wide range ofindustrial product assembly applications.
Scotch-Grip™ Rubber and Gasket AdhesivesA versatile line of high strength adhesives that are used throughout the industry to bond many rubber and gasketmaterials to themselves and to other substrates.
Overlap Shear Strength(PSI)
PeelStrength
(PIW)
Product Features Solids Wt.(Approx.) Flash Point Consistency Colour
(Dry Film)Application
MethodBondingRange
75°F(24°C)
180°F(82°C)
75°F(24°C)
5Green
Rapid strength build-up. Heat and creep resistant bond.Meets mil spec MMM-A-121.
19% -14°F(-26°C)
Thin liquid Green Spray 30 min.minimum
482(1) 65(1) 19(2)
5Neutral
Neutral coloured version of Fastbond 5 Adhesive. 19% -14°F(-26°C)
Thin liquid Lightyellow
Spray 30 min.minimum
482(1) 65(1) 19(2)
10Neutral
Similar performance to 5 Neutral Adhesive. Brushable withhigher coverage. Meets mil spec MMM-A-121.
22% -14°F(-26°C)
Thin liquid Lightyellow
Brush roller 30 min.minimum
482(1) 65(1) 19(2)
1357 Rapid strength build-up to a very high strength bond formetal. Resists heat and continuous load stress. Meets MIL-A-21366A, MMM-A-121.
25% -14°F(-26°C)
Thin liquid Grey-green Brush spray 30 min.minimum
536(1) 199(1) 42(2)
1357Neutral
Neutral coloured version of 1357 Adhesive. 25% -14°F(-26°C)
Thin liquid Lightyellow
Brush spray 30 min.minimum
536(1) 199(1) 42(2)
1357-L Lower solids, lower viscosity version of 1357 Adhesive forautomatic spray applications
18% -14°F(-26°C)
Thin liquid Grey-green Spray 30 min.minimum
536(1) 199(1) 42(2)
Overlap Shear Strength(PSI)
PeelStrength
(PIW)
Product Features Solids Wt.(Approx.) Flash Point Consistency Colour
(Dry Film)Application
MethodBondingRange
75°F(24°C)
180°F(82°C)
75°F(24°C)
847 Quick drying and flexible with fuel and oil resistance. Heatand solvent reactivated. Curable with heat.
36% 0°F(-18°C)
Medium liquid Brown Brush, flow Up to 15minutes
200(1) 9(1) 40(2)
847-L Lower viscosity version of 847 Adhesive for sprayapplication.
24% 0°F(-18°C)
Thin syrup Brown Spray, brush Up to 20minutes
200(1) 9(1) 40(2)
847-H Higher viscosity version of 847 Adhesive. 50% 0°F(-18°C)
Thick syrup Brown Brush, flow Up to 10minutes
200(1) 9(1) 40(2)
1300 High immediate strength, fast-drying, and heat resistant forrubber and metal.
37% -14°F(-26°C)
Medium liquid Yellow Brush, flow Up to 12minutes
549(1) 136(1) 52(2)
1300-L Lower viscosity version of 1300 Adhesive. Sprayable. MeetsMil Spec MMM-A-121.
29% -14°F(-26°C)
Thin liquid Yellow Spray, brush Up to 8minutes
549(1) 136(1) 52(2)
1300Roll
Coatable
Slow drying, roll coatable version of 1300 Adhesive. 32% 40°F(4°C)
Thin liquid Yellow Spray,brush, flow,roll, coat
Up to 15minutes
549(1) 136(1) 52(2)
2141 Easy-brushing general purpose rubber adhesive withexcellent water resistance.
30% -14°F(-26°C)
Medium liquid Lightyellow
Brush, flow Up to 15minutes
- - 32(2)
(1) Birch plywood to birch plywood @ 0.1 inches/minute seperation rate. (2) Canvas to cold rolled steel @ 2.0 inches/minute seperation rate.
551Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
3MADHESIVES
Scotch-Weld Two-Part Epoxy AdhesivesTwo-part, room-temperature or heat curing epoxy adhesives providehigh-strength bonds on a wide variety of substrates. Bond is oftenstronger than the parts being bonded.
Product(Colour)(1) Features
1648 B/A Green • Long worklife adhesive • Rigid epoxy• 8-12 hrs. handling strength• Higher performing product at elevated temperatures
1751 B/A Grey • Long worklife adhesive • Rigid epoxy• 8-12 hrs. handling strength• Excellent void filler and machinable for many “Body Solder” applications
1838 B/A Green • Long worklife adhesive • Rigid epoxy• 8-12 hrs. handling strength• Meets MIL-A-23941A• Excellent environmental resistance
1838 B/A Tan • Long worklife adhesive • Rigid epoxy• 8-12 hrs. handling strength• Tan version of 1838 Green Adhesive
1838-L B/ATranslucent
• Long worklife adhesive • Rigid epoxy• 8-12 hrs. handling strength• Translucent, low viscosity version of 1838 Green Adhesive
2158 B/A Grey • Long worklife adhesive • Rigid epoxy• 8-12 hrs. handling strength• General purpose product
2216 B/A Grey • Long worklife adhesive • Flexible epoxy• 8-12 hrs. handling strength• Can bond plastic, metal and other dissimilar materials
2216 B/A TanNon-Sag
• Long worklife adhesive • Flexible epoxy• 8-12 hrs. handling strength• Tan version of 2216 B/A Grey Adhesive
2216 B/ATranslucent
• Long worklife adhesive • Flexible epoxy• 16-20 hrs. handling strength• Translucent version of 2216 B/A Grey Adhesive
3501 B/A Grey • Fast cure adhesive • Rigid epoxy• 20-30 min. handling strength• Rapid room temp. curing material that can bond metal, wood, mostplastics and masonry products
Scotch-Weld Two-Part Urethane AdhesivesTwo-part urethane adhesives cure at room-temperature or with heatto provide tough, impact resistant bonds with high peel strength.
Product(Colour)(1) Features
3532 B/ABrown
• Fast cure adhesive • 20-30 min. handling strenght• Semi-rigid urethane• Rapid cure, for flexible bonds of many plastics, wood and rubber
3535 B/AOff-White
• Very fast cure adhesive • 15-20 min. handling strength• Semi-rigid urethane• Faster setting version of 3532 B/A Adhesive
3549 B/ABrown
• Long worklife adhesive • 2-4 hrs. handling strength• Semi-rigid urethane• Longer worklife version of 3532 B/A Adhesive
Scotch-Weld Adhesives in Duo-PakcartridgesTwo-part, room-temperature curing epoxy, urethane and acrylic adhesivesespecially formulated and packaged for use in the EPX Applicator.
Product(Colour)(1) Features
DP-100Clear
• Fast cure adhesive • Rigid epoxy• 15-20 min. handling strength • Machinable product
DP-100PlusClear
• Water clear • Fast cure• Good peel and shear strength
DP-100NSTranslucent
• Fast cure adhesive • Rigid epoxy• 25-30 min. handling strength• Translucent low flow version of DP-100 Adhesive
DP-100 FRWhite
• Fast cure adhesive • Rigid epoxy• 25-30 min. handling strength • Meets UL94V-0 rating• Self-extinguishing version of DP-100 Adhesive
DP-105Clear
• Water clear • Fast cure• Very flexible • Excellent peel strength
DP-105Grey
• Grey • Fast cure adhesive• Very flexible • Excellent peel strength
DP-110Grey
• Fast cure adhesive • Flexible epoxy• 30 min. handling strength
DP-110Translucent
• Fast cure adhesive • Flexible epoxy• 30 min. handling strength• Translucent version of DP-110 Grey Adhesive
DP-125Grey
• Medium worklife• Good peel strength
DP-125Translucent
• Medium worklife• Good peel strength
DP-190Grey
• Long worklife adhesive • Flexible epoxy• 8-12 hrs. handling strength• Can bond metals, plastics and many other dissimilar materials
DP-190Translucent
• Long worklife• Good peel strength
DP-270Black
• Long worklife adhesive potting compound• 8-12 hrs. handling strength • Rigid epoxy
DP-270Clear
• Long worklife adhesive potting compound• 8-12 hrs. handling strength • Rigid epoxy• Clear product for many electronic applications• Black version of DP-270 Clear Adhesive
DP-420Off-White
• Medium worklife adhesive • Toughened epoxy• 1-2 hrs. handling strength• High performance product
DP-460Off-White
• Long worklife adhesive • Toughened epoxy• 2-4 hrs. handling strength • Meets MIL-A-23941A• Longer worklife than DP-420 Adhesive type product• High performance product
DP-605NSOff-White
• Fast cure adhesive • Semi-rigid urethane• 15-20 min. handling strength• Excellent gap filler and non-sag product for wood and plastic
DP-805Light Yellow
• High peel and shear strength• Can bond slightly oily material• Good elevated temperature performance• Excellent plastic adhesion
(1) Colour is mixed if two-part product.(2) Brookfield viscometer viscosity values are typical values for the mixed product.(3) The time during which an adhesive will adequately wet-out on a substrate.
(4) 180° peel tested on 0.030” aluminum per ASTM D 1876-61T.(5) Tested per ASTM D 1002.64.
3M
552 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
ADHESIVES
3525 B/A Epoxy adhesive3M 3524 B/A Epoxy Adhesive can be used as a filler on honeycomb floor panels to help prevent damage whenthe panels are removed. The high viscosity of the adhesive helps it stay in place and when hardened acts as anexcellent gap filler.
Part No. Description3524 B/A . . . . . . . . . . . . . . . . . . . .3524 Epoxy adhesive
Scotch-Seal and Weatherban SealantsA versatile line of products for a wide variety of sealant applications
Part No. Desc. Features
606-NF Sealant Smooth handling, weather resistant sealant for metal, wood, paintedor primed surfaces and certain abraded plastics. Skins over 20-40minutes with low shrinkage. Permits weld-through and painting.
800 Sealant Air dries to a flexible, rubbery seal for aluminum, cold rolled steel,galvanized steel, glass, many plastics and other surfaces. Resistsweather, water, oils, fuel, detergent and soap solutions.
900 Sealant Firm, rubbery seal with gap filling properties for aluminum, galvanizedsteel, cold rolled steel and more. Economically seals medium andhigh pressure heating and air conditioning ducts.
1103 Sealant Weather resistant seal for glass, aluminum, cold rolled steel,galvanized steel, rubber and wood.
1252 Tamper-proofSealant
Fire retardant seal for aluminum, glass, galvanized steel, cold rolledsteel and most plastics. Resists oil, gasoline, water, jet fuel andfungus. Will not corrode metal. Tack free in 20 seconds.
Part No. Desc. Features
2084 Sealant Adheres to metal, wood and glass. Seals metal to glass in windowsand doors. Resists weather, water, oil and gasoline.
5200 Sealant Rubbery, extremely strong sealant/adhesive for mahogany, teak,cedar, fir, plywood and fiberglass. Non-shrinking, one-part moisturecure. Resists weather, fresh and salt water.
5354 Sealanttape
High tack, adheres aggressively to porous and non-porous surfaces.Easy to compress and resists cold flow.
PF-5422 Sealanttape
Thread reinforced for dimensional stability and die-cutting.Repositionable with virtually no clean-up. Weather resistant Adhesionof glass, metal and many other non-porous surfaces.
PF-5423 Sealanttape
Non-reinforced thinner product similar to PF-5422 Sealant Tape.
3M Aerosol AdhesivesBased on 3M pioneering technology, these aerosol adhesives are precisely formulated for industrial performance requirements.
Part No. Desc. Features
72 Pressure sensitiveadhesive
Repositionable with aggressive tack for bondingpolyethylene film and foam; also carpet bonding. Bluecolour.
Super 74 Foam fastadhesive
Fast tack with foam-tearing strength and soft, non-dimplingglue line. General upholstery foam bonding. Plus knife edgebonding, boxing, edge turning.
75 Repositionableadhesive
Clear “take-like” adhesive holds badges during stitching andpatterns prior to cutting. No bleed, stain or wrinkle.
76 High tack adhesive Multi-purpose with high temperature resistance and strongone-surface bonds.
Part No. Desc. Features
Super 77 Spray adhesive Fast, aggressive tack for bonding many lightweight materials.Choice of round or fan pattern nozzle.
80 Neoprenecontactadhesive
Neoprene-based contact adhesive with plasticizer resistance.Can bond supported vinyl, leather, most rubber. Adheres tomost plastics, laminate and wood. Resists over 200°F (93°C).
90 Hi-strengthadhesive
High contact strength for bonding decorative laminate. Adherespolyethylene and polypropylene to wood, metal, and more. Oneminute dry time.
553Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
DEVCONEPOXIES
2-PARTSTRUCTURAL EPOXIES
Devcon advanced epoxy adhesives are used for structural bonding, potting and encapsulating, and comes in a variety ofcure times, and package sizes.
5 Minute® EpoxyRapid-curing, general-purpose adhesive/ encapsulant.
Package/ Size StockNumber
NozzleNumber
DispenserNumber
25 ml Dev-Tube™ . . . .14250 . . .--- . . . . . . . . . . . . . . .--- . . . . .50 ml cartridge . . . . . . .14270 . . .14280 (manual) . . . .14285 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14275 (pneumatic) .14285 .2.5 ounces . . . . . . . . . .14210 . . .--- . . . . . . . . . . . . . . .--- . . . . .400 ml cartridge . . . . . .DA051 . . .14410 (manual) . . . .14292 .15 ounces . . . . . . . . . . .14200 . . .--- . . . . . . . . . . . . . . .--- . . . . .9 pounds . . . . . . . . . . .14630 . . .--- . . . . . . . . . . . . . . .--- . . . . .10 gallon kit . . . . . . . . .DA032 . . .--- . . . . . . . . . . . . . . .--- . . . . .100 gallon kit . . . . . . . .DA007 . . .--- . . . . . . . . . . . . . . .--- . . . . .
5 Minute® Epoxy GelThixotropic, nonmigrating gel adhesive with excellentgap filling properties.
Package/ Size StockNumber
NozzleNumber
DispenserNumber
25 ml Dev-Tube™ . . . .14240 . . .--- . . . . . . . . . . . . . . .--- . . . . .50 ml cartridge . . . . . . .14265 . . .14280 (manual) . . . .14285 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14275 (pneumatic) .14285 .400 ml cartridge . . . . . .DA052 . . .14410 (manual) . . . .14292 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14400 (pneumatic) .14292 .10 gallon kit . . . . . . . . .DA240 . . .--- . . . . . . . . . . . . . . .--- . . . . .
5 Minute® FRA flame retardant version of the 5 minute® Epoxy generaladhesive.
Package/ Size StockNumber
NozzleNumber
DispenserNumber
50 ml . . . . . . . . . . . . . .14271 . . .14280 (manual) . . . .14292 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14275 (pneumatic) .14292 .
10 Minute® EpoxyFlexible epoxy provides excellent adhesion to metalsand superior peel, impact, and chemical resistance.
Package/ Size StockNumber
NozzleNumber
DispenserNumber
50 ml cartridge (clear) .14251 . . .14280 (manual) . . . .14285 .(black) .14255 . . .14275 (pneumatic) .14285 .
400 ml cartridge (black) DA012 . . .14410 (manual) . . . .14292 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14400 (pneumatic) .14292 .10 gallon kit (black) .DA112 . . .--- . . . . . . . . . . . . . . .--- . . . . .
One Minute® Epoxy GelLightning fast curing gel adhesive for filling gaps, cracks,and holes.
Package/ Size StockNumber
NozzleNumber
DispenserNumber
50 ml cartridge . . . . . . .14277 . . .14280 (manual) . . . .14285 .
DEVCON
554 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
DISPENSING EQUIPMENT
MANUAL ANDPNEUMATIC SYSTEMS
Manual and pneumatic applicator guns with static nozzles mix as they dispense, eliminating premixing and ensuring precisebead control.
50 ml Mark5™ Dispensing System Mix Nozzle Selector GuideManual and pneumatic dispensing guns and customdesigned static mixing nozzles for 1:1 and 10:1 50mlsystems.
OrderingInformation
Dispensing GunsManual (1:1 and 10:1 ratio) . . . . . .14280Pneumatic (1:1 ratio) . . . . . . . . . . .14275
Mixing NozzlesØ .24” (1:1 and 10:1 ratio) . . . . . . .14285
250 ml Dispensing SystemManual and pneumatic dispensing guns and customdesigned static mixing nozzles for 10:1 250 ml systems.
OrderingInformation
Dispensing GunsManual (10:1 ratio) . . . . . . . . . . . . .14151Pneumatic (10:1 ratio) . . . . . . . . . .14152
Mixing NozzlesØ .38” (10:1 ratio) . . . . . . . . . . . . .15047
380 ml Coaxial Dispensing SystemManual and pneumatic dispensing guns and customdesigned static mixing nozzles for 10:1 380ml coaxialsystems.
OrderingInformation
Dispensing GunsMF Manual (10:1 ratio) . . . . . . . . .14409Pneumatic (10:1 ratio) . . . . . . . . . .14407
Mixing NozzlesØ .32” (10:1 ratio) . . . . . . . . . . . . .14293
400 ml Dispensing SystemManual and pneumatic dispensing guns and customdesigned static mixing nozzles for 1:1 400 ml systemsand 10:1 490 ml systems.
OrderingInformation
Dispensing GunsManual (1:1 ratio) . . . . . . . . . . . . . .14410Manual (10:1 ratio) . . . . . . . . . . . . .14405Pneumatic (1:1 ratio) . . . . . . . . . . .14400Pneumatic (10:1 ratio) . . . . . . . . . .14406
Mixing NozzlesØ .23” (1:1 ratio) . . . . . . . . . . . . . .14291Ø .32” (1:1 ratio) . . . . . . . . . . . . . .14293Ø .50” (1:1 ratio) . . . . . . . . . . . . . .14292Ø .31” (10:1 ratio) . . . . . . . . . . . . .14297Ø .38” (10:1 ratio) . . . . . . . . . . . . .15047
Mix Nozzles Element Product Compatibility14285(for Mark V 1:1 50ml gun)
21 element6mm or Ø.238”
1’Minute, 5-Minute, 2-Ton, Epoxy Plus 25, HP 250,Clear Coat, 5-Minute Gel, Plastic Welder, PlasticWelder II, Flex Welder, Plastic Welder SD, MetalWelder
14291(for 400ml pneumatic gun only)
18 element6mm or Ø.250”
Smaller diameter for less waste for methacrylates/Plastic Welder, Plastic Welder II, Flex Welder
14292(for 400ml 1:1 manual or pneumatic gun)
18 element10mm or Ø.395”
1-Minute, 5-Minute, 2-Ton, Epoxy Plus 25,HP 250, Clear Coat, 5-Minute Gel, Plastic Welder,Plastic Welder II, Flex Welder, Plastic Welder SD
14293(for 400ml 1:1 manual or pneumatic gun)(for 380ml 10:1 Co-axial manual or pneumatic gun)
32 element8mm or Ø.317”
Epoxy Plus 25, Cable Cast, Metal Welder, MetalWelder II
14294(for Mark V 1:1 50 ml gun)
17 element4mm or Ø.158”
1-Minute, 5-Minute Gel, Plastic Welder,Plastic Welder II, Flex Welder
14297(for 490ml/250ml 10:1 manual or pneumatic gun)
24 element8mm or Ø.317”
Composite Welder FS
15047(for 400ml 4:1 manual or pneumatic gun)
24 element10mm or Ø.395”
Flexane FC Rubber Repair Liquid,Flexane FC Rubber Repair,Edge & Seal (T-35), High Temp Edge & Seal (T-36)
555Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
DEVCONMETAL REPAIR
PUTTIES Metal-filled epoxy putties allow fast, economical, permanent repairs to plant and equipment, cure quickly, and resistcorrosion and harsh chemicals.
Plastic Steel® (A)The original metal-filled epoxy putty, it is ideal forrepairing areas where welding or brazing would beimpractical. Can be drilled, tapped, and machined.
1 lb . . . . . . . . . . . . . . . . . . . . . . . . .101104 lb . . . . . . . . . . . . . . . . . . . . . . . . .1012025 lb . . . . . . . . . . . . . . . . . . . . . . . .10130
Titanium PuttyHigh-tech, nonrusting titanium-reinforced epoxy putty formaking repairs that can be precision machined.Withstands heavy loads in harsh chemical environments.
1 lb . . . . . . . . . . . . . . . . . . . . . . . . .107602 lb . . . . . . . . . . . . . . . . . . . . . . . . .10770
Stainless Steel Putty (ST)Stainless steel-filled epoxy putty for patching, repairing,and rebuilding stainless steel food processingequipment.
1 lb . . . . . . . . . . . . . . . . . . . . . . . . .10270
Plastic Steel® 5 Minute® (SF)Fast-curing, steel-filled epoxy for emergency repairs attemperatures as low as 40ºF. Repaired parts can bereturned to service within one hour.
1 lb . . . . . . . . . . . . . . . . . . . . . . . . .10240
Aluminum Putty (F)Aluminum-filled epoxy putty for dependable nonrustingrepairs to aluminum castings, machinery, and equipment.It is widely used HVAC applications.
1 lb . . . . . . . . . . . . . . . . . . . . . . . . .106103 lb . . . . . . . . . . . . . . . . . . . . . . . . .10620
Bronze Putty (BR)Bronze-filled epoxy for repairing bronze andbrass bushings, castings, and parts.
1 lb . . . . . . . . . . . . . . . . . . . . . . . . .10260
SEALANTSPRC-DeSOTO
556 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Product Features Chemistry Approved by
P/S 890 Over 40 years of field service Poly sulfide, manganese dioxide cured Boeing, Cessna, Raytheon (Beech), SAAB, SAE (AMS)
PR-1422 Over 40 years of field service, humidity independent cure Polysulfide, dichromate cured Airbus Industrie, BAE SYSTEMS, Boeing (Long Beach),EMBRAER, Lockheed, SAAB, UK MoD
PR-1440 Over 35 years of field service Poly sulfide, manganese dioxide cured SAE (AMS), Sikorsky, UK MoD
PR-1750 Higher temperature resistance Poly sulfide, manganese dioxide cured Boeing (St. Louis), Lockheed, SAE (AMS)
PR-1776 20% lower weight than P/S 890 (SpG = 1.30)
Poly sulfide, manganese dioxide curedPermapol® P-5 polymer
Airbus Industrie, Boeing, Bombardier, SAE (AMS)
Fuel Tank/Proven Standards Proven over years of on-going service.
Product Features Chemistry Approved by
PR-1770 High strength, high solids content, excellent tensile/peelstrength properties
Poly sulfied, maganese dioxide curedPermapol® P-5 polymer
BAE SYSTEMS, Boeing, Eurofighter, Northrop Grumman
PR-1771 30% lower weight than P/S 890 (SpG = 1.1), non-chromate corrosion inhibitive
Poly sulfied, maganese dioxide curedPermapol® P-5 polymer
Under qualification at Airbus Industrie
PR-1772 30% lower weight than P/S 890 (SpG = 1.1) Poly sulfied, maganese dioxide curedPermapol® P-5 polymer
Under qualification at Boeing
PR-2001 Rapid curing, light weight (SpG = 1.4), low odor, lowshrinkage, excellent tooling properties
Polythioether, epoxy curedPermapol® P-3.1 polymer
Boeing (St. Louis), Northrop Grumman Under qualification at SAE
Fuel Tank/High Performance Options Advanced technology. Superior performance.
SEALANTS
557Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
PRC-DeSOTO
Product Features Chemistry Approved by
P/S 870 Benchmark corrosion inhibitive sealant, 3-7% solublechromate
Polysulfide, manganese dioxide cured Boeing, Bombardier, Lockheed, SAAB, U.S. Navy
P/S 875 Light weight SpG = 1.01 Polysulfide, manganese dioxide curedPermapol® P-5 polymer
Boeing
PR-1432-GV Highly flexible, sprayable alternative to rigid epoxyprimers for painting aircraft exteriors; excellent adhsion,but easy to strip when required.
Polysulfide, dichromate cured Under qualification with USAF
PR-1436-G Spr. Sprayable, low shrinkage Polysulfide, dichromate cured Boeing, UKMoD, U.S. Navy
PR-1775 Chromate free Polysulfide, manganese dioxide curedPermapol® P-5 polymer
Boeing (Long Beach), SAE (AMS)
CorrosionInhibitive Protects the airframe from harsh environments.
Product Features Chemistry Approved by
PR-1764 Corrosion inhibitive, EMI/RFI shielding, fuel resistant Poly thioether, manganese dioxide cured Permapol® P-3polymer
BAE SYSTEMS, Lockheed, Raytheon, SAAB, SAE (AMS)
PR-2200 Low Shrinkage, corrosion inhibitive, EMI/RFI shielding,fuel resistant, excellent elongation
Polythioether, epoxy cured Permapol® P-3.1 polymer Boeing (St. Louis), Northrop Grumman
PR-2225 High temperature resistance Silicone Boeing (St. Louis), Northrop Grumman
Electrically Conductive Ideal for use where electrical continuity across the seal is required
Product Features Chemistry Approved by
PR-1826 Wider service temp. than polysulfide, rapid cure (4 hoursat 77°F/25°C for B-1/2)
Polythioether, epoxy cured, Permapol® P-3 polymer Boeing, USAF, U.S. Navy
PR-1828 Wider service temp. than polysulfide, rapid cure (4 hoursat 77°F/25°C for B-1/2), primerless adhesion
Polythioether, epoxy cured, Permapol® P-3 polymer Airbus Industrie
PR-2001 Rapid cure (3 hours at 77°F/25°C for B-1/2), low weight,low odor, low shrinkage, excellent tooling properties,primerless adhesion, cures at low temperatures
Polythioether, epoxy cured, Permapol® P-3.1 polymer Boeing (St. Louis), Northrop Grumman, U.S. Nazy Under qualification at SAE (AMS)
Fast Cure/Flight Line Repair When time counts.
SEALANTSPRC-DeSOTO
558 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Product Features Chemistry Approved by
PR-142 Non-crazying for acrylic and polycarbonate Silane Pilkington, Sierracin
PR-148 Cleaner and coupling agent Titanate BAE Systems, Lockheed, SAE(AMS)
PR-182 VOC comnpliant, water based, worker/environmentallyfriendly
Silane Boeing (St. Louis), Northrop Grumman
PR-184 Lower flammability, low odor, no armoatic solvent Titanate Airbus Industrie
PR-187 Coupling agent for polythioether to polysulfideapplications
Amine Northrop Grumman
AdhesionPromoters To ensure consistent adhesion.
Product Features Chemistry Approved by
CA 1000 Sealing removable assemblies, one part, non-chromatecorrosion inhibitive, non-curing
Polysulfide, epoxy capped Permapol® polymer BAE SYSTEMS, Eurofighter, Sikorsky
PR-1425 Aircraft windshield and canopy sealing, humidityindependent cure, good UV resistance
Polysulfide, dichromate cured Aerospace Composite Technologies, Lockheed(Ft.Worth), Pilkington, PRG, SAAB, Sierracin
PR-1428 Access door/form-in-pace gasket applications, fuelresistant
Polysulfide manganese dioxide cured Boeing, Bombardier (De Haviland), U.S. Military
PR-1460-Q Electrical potting in fuel exposed areas, fuel resistant,sovent free
Polysulfide manganese dioxide cured Under qualification at SAE (AMS)
PR-1773 Access door/form-in-pace gasket applications, fuelresistant, non-chromate corrosion inhibitive
Polysulfide manganese dioxide cured Permapol® P-5plymer
Underqualification at Airbus Industrie and SAE (AMS)
PR-1829 Aircraft windshield and canopy sealing, rapid cure,humidity independent cure, UV resistant, non-crazying
Polythioether, epoxy cured Permapol® P-3 polymer Aerospace Composite Technologies, Airbus Industrie,PRG, Sierracin
SpecialtyProducts For unique applications.
ADHESIVES
559Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
VANTICO
Typical Syntactic Properties
ADHESIVESVANTICO
560 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Typical Adhesive Properties
ADHESIVES
561Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
VANTICO
Sugg
este
d Ap
plic
atio
ns /
Com
men
ts
Tran
spar
ent,
low-v
iscos
ity a
dhes
ive.
Blac
k, hig
h-str
engt
h ad
hesiv
e th
atcu
res a
t 104
°F (4
0°C)
. Pro
vides
good
bon
d str
engt
h to
212
°F (1
00°C
)
Blac
k, hig
h-str
engt
h ad
hesiv
e th
atcu
res a
t 104
°F (4
0°C)
. Pro
vides
good
bon
d str
engt
h to
212
°F (1
00°C
)
Max
imum
Serv
ice
Tem
p.,e
°F/°C
140/
60 212/
100
212/
100
Hard
ness
,Sh
ore
D
84 85 82
Coef
ficie
ntof
The
rmal
Expa
nsio
n,in
/in./°
F
3.1x
10-5
3.89
x10-5
6.37
x10-5
Ultim
ate
Tens
ileSt
reng
th,
psi
6,20
0
6.66
0
9,60
0
Elon
ga-
tion %
9 6 4
Tg,
°F/°C
181/
83 164/
74 158/
70
Lap
Shea
rSt
reng
th,d
psi @
p
si @
77°F
+ 1
80°F
+
1,15
0
2,84
0
1,58
0
2,50
0
3,41
0
2,59
0
Min
imum
Cur
e TI
me
Hrs
@
Min
@
M
in @
77°F
+
140°
F+
212
°F+
15 10 15-2
0
120
60 60-1
20
24 24 24
Hand
ling
Stre
ngth
,b
Hrs
@77
°F+
12 4.5
4.5
Pot L
ife,
Min
@77
°F+
90 752
754
Spec
ific
Grav
ity,
Com
po-
nent
s
1.15
0.93
1.39
0.93
1.39
0l.93
Mix
edVi
scos
ity,
cP
3,50
0
7,50
0
7,50
0
Visc
osity
,Co
mpo
-ne
nts,
cP
1,60
023
,000
50,0
001,
700
50,0
0090
0
Mix
Rat
io,
By W
t./ B
yVo
l.
100:
40/
100:
50
100:
40/
100:
55
100:
30/
100:
40
Prod
uct
Arald
ite ®
AY
103/
Hard
ener
HY
991
Arald
ite A
W 1
36/
Hard
ener
HY
994
Arald
ite®
AW 1
36/
Hard
ener
® HY
5049
Two-
com
pone
nt E
poxy
Adh
esiv
esLI
QUID
Sugg
este
d Ap
plic
atio
ns /
Com
men
ts
Clea
r, fa
st-se
tting
adhe
sive
for
bond
ing a
nd re
pairin
g sm
all p
arts.
Cure
s at t
empe
ratu
res a
s low
as
41°F
(5°C
).
Tran
sluce
nt a
dhes
ive w
ith h
ighre
activ
ity a
bove
160
°F (7
0°C)
.Bo
nds f
iberg
lass,
plasti
cs a
nd w
ood.
Gene
ral-p
urpo
se a
dhes
ive w
ithex
celle
nt im
pact
and
vibra
tion
resis
tanc
e. B
onds
met
als, c
eram
ic,ru
bber
and
plas
tic.
Fast-
curin
g ad
hesiv
e th
at fo
rms
stron
g, to
ugh
bond
s on
met
als a
ndrig
id pla
stics
.
Ultra
fast-
settin
g ad
hesiv
e wi
th g
ood
flexib
ility.
Med
ium-v
iscos
ity, t
rans
lucen
tad
hesiv
e wi
th e
xcell
ent f
lexibi
lity.
Bond
s well
to va
riety
of su
bstra
tes.
Max
imum
Serv
ice
Tem
p.,e
°F/°C
120/
50 195/
90 140/
60 120/
50 120/
50 176/
80
Hard
ness
,Sh
ore
D
83 85 80 82 83 72
Coef
ficie
ntof
The
rmal
Expa
nsio
n,in
/in./°
F
4.02
x10-5
3.73
x10-5
4.72
x10-5
3.60
x10-5
4.02
x10-5
11.8
x10-5
Ultim
ate
Tens
ileSt
reng
th,
psi
4,63
0
9,00
0
4,80
0
--- --- 2,20
0
Elon
ga-
tion %
7 5 9 --- --- 50
Tg,
°F/°C
136/
58 185/
85 146/
63 86/
30 136/
58 88/
191
Lap
Shea
rSt
reng
th,d
psi @
p
si @
77°F
+ 1
80°F
+
200
3,20
0
250
500
500f
900
2,56
0
4,10
0
2,56
0G
2,40
0G
3,10
0F
2,60
0
Min
imum
Cur
e TI
me
Hrs
@
Min
@
M
in @
77°F
+
140°
F+
212
°F+
NR 15 10 2 --- 10
NR 60 60 10 --- 60
4 24 12 1 1 16
Hand
ling
Stre
ngth
,b
Hrs
@77
°F+
10 m
in.
8 7 20 m
in.
5 m
in.
4
Pot L
ife,
Min
@77
°F+
43 952
1202
42 901
604
Spec
ific
Grav
ity,
Com
po-
nent
s
1.16
1.14
1.16
0.99
1.17
0.92
1.17
1.17
1.16
1.14
1.23
0.94
Mix
edVi
scos
ity,
cP
14,0
00
13,0
00
45,0
00
30,0
00
20,0
00
21,0
00
Visc
osity
,Co
mpo
nen
ts, c
P
14,0
0014
,000
16,5
0038
,000
50,0
0035
,000
35,0
0030
,000
25,0
0015
,000
33,0
0025
,000
Mix
Rat
io,
By W
t./ B
yVo
l.
100:
100/
100:
100
100:
42/
100:
50
100:
80/
100:
100
100:
100/
100:
100
100:
100/
100:
100
100:
77/
100:
100
Prod
uct
Arald
ite®
AY55
7/Ha
rden
er H
Y55
7
TDR
1100
-11 R
esin/
TDR
1100
-11Ha
rden
er
Arald
ite®
2011
Arald
ite®
2012
Arald
ite®
2043
Arald
ite®
AW 8
595/
Hard
ener
HW
859
5
MED
IUM
VIS
COSI
TY
ADHESIVESVANTICO
562 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Sugg
este
d Ap
plic
atio
ns /
Com
men
ts
Fast-
settin
g ad
hesiv
e th
at cu
res a
tte
mpe
ratu
res a
s low
as 4
1°F
(5°C
).Fo
r bon
ding
and
repa
iring
small
parts
.
Elec
trica
lly in
sulat
ed a
dhes
ive w
ithgo
od re
sista
nce
to h
eat,
chem
icals
and
corro
sion.
Flex
ible
adhe
sive
that
fixtu
res f
ast a
t25
0°F
(120
°C).
For b
ondin
g SM
C.
High
-flex
ibility
adh
esive
that
fixtu
res
fast
at 2
50°F
(120
°C).
For b
ondin
g SM
C.
High
-tem
pera
ture
exp
oy w
ith lo
ngwo
rk lif
e an
d ex
celle
nt ch
emica
lre
sista
nce.
Max
imum
Serv
ice
Tem
p.,e
°F/°C
140/
60 284/
140
250/
120
194/
90 350/
180
Hard
ness
,Sh
ore
D
85 84 78 66 90
Coef
ficie
ntof
The
rmal
Expa
nsio
n,in
/in./°
F
3.61
x10-5
3.69
x10-5
8.3x
10-5
8.9x
10-5
2.87
x10-5
Ultim
ate
Tens
ileSt
reng
th,
psi
3,85
0
5,50
0
3,40
0
2,00
0
7,30
0
Elon
ga-
tion %
5 1 15 55 2
Tg,
°F/°C
127/
53 230/
110
208/
98 199/
93 289/
143
Lap
Shea
rSt
reng
th,d
psi @
p
si @
77°F
+ 1
80°F
+
220
2,40
0
2,38
0
2,40
0
3,40
0
2.84
0
2,40
0G
3,38
0
3,50
0
3,40
0
Min
imum
Cur
e TI
me
Hrs
@
Min
@
M
in @
77°F
+
140°
F+
212
°F+
NR 6 5 5 10
NR 30 60 60 60
4 6 24 48 24
Hand
ling
Stre
ngth
,b
Hrs
@77
°F+
10 m
in.
3.5
3 3.5
8
Pot L
ife,
Min
@77
°F+
41 404
304
404
1204
Spec
ific
Grav
ity,
Com
po-
nent
s
1.48
1.44
1.60
1.60
1.32
1.21
1.33
1.27
1.43
1.18
Mix
edVi
scos
ity,
cP
250,
000
90,0
00
250,
000
310,
000
30,0
00
Visc
osity
,Co
mpo
nen
ts, c
P
260,
000
160,
000
55,0
0051
0,00
0
172,
500
368,
000
320,
000
304,
000
75,0
0012
,000
Mix
Rat
io,
By W
t./ B
yVo
l.
100:
100/
100:
100
100:
50/
100:
50
100:
92/
100:
100
100:
187/
100:
200
100:
41/
100:
50
Prod
uct
Fastw
eld™
10
Resin
/Fa
stweld
™ 1
0Ha
rden
er
Arald
ite®
2014
Arald
ite®
AV 8
503/
Hard
ener
HV
8503
Arald
ite®
AV 8
531/
Hard
ener
HV
8531
Arald
ite®
AV 8
574
Hard
ener
HV
8574
Sugg
este
d Ap
plic
atio
ns /
Com
men
ts
Mah
ogan
y-co
lored
pas
te th
at is
eas
yto
sand
and
han
d-ca
rve.
For r
epair
and
bon
ding
of w
ood
prod
ucts.
Gap-
filling
, alum
inum
-fille
d pa
ste th
atis
easy
to m
achin
e.Fo
r gen
eral-
purp
ose
bond
ing a
ndre
pair.
Toug
h hig
h-str
engt
h ad
hesiv
e wi
thgo
od ch
emica
l res
istan
ce a
nden
viron
men
tal s
tabil
ity. F
or b
ondin
gm
etals
.
Thixo
tropic
, non
-sag
ging
adhis
iveth
at fo
rms r
esilie
nt b
onds
on
SMC
and
FRP.
High
-stre
ngth
, thix
otro
pic p
aste
with
exce
llent
gap
-fillin
g ch
arac
teris
tics.
Bond
s well
to o
ily m
etals
.
High
-stre
ngth
, thix
otro
pic p
aste
with
exce
llent
gap
-fillin
g ch
arac
teris
tics.
Conv
enien
t 1:1
mix
ratio
.
Max
imum
Serv
ice
Tem
p.,e
°F/°C
120/
50 140/
60 --- --- 176/
80 176/
80
Hard
ness
,Sh
ore
D
73 89 80 75 75 75
Coef
ficie
ntof
The
rmal
Expa
nsio
n,in
/in./°
F
4.24
x10-5
3.02
x10-5
4.44
x10-5
5.27
x10-5
7.8x
10-5
14.0
x10-5
Ultim
ate
Tens
ileSt
reng
th,
psi
2,13
0
5,60
0
5,00
0
3,40
0
2,28
0
2,29
0
Elon
ga-
tion %
11 2 2 2 25 29
Tg,
°F/°C
146/
63 166/
74 149/
65 181/
83 191/
88 191/
88
Lap
Shea
rSt
reng
th,d
psi @
p
si @
77°F
+ 1
80°F
+
140
330
700
1,05
0
890
890
1,99
0
2,84
0
3,00
0G
3,20
0G
2,50
0
2,50
0
Min
imum
Cur
e TI
me
Hrs
@
Min
@
M
in @
77°F
+
140°
F+
212
°F+
10 10 6 7 10 10
30 30 40 35 60 60
6 6 10 10 16 16
Hand
ling
Stre
ngth
,b
Hrs
@77
°F+
3.5
3.5
4 4 4 5.5
Pot L
ife,
Min
@77
°F+
20 232
652
352
604
604
Spec
ific
Grav
ity,
Com
po-
nent
s
0.82
0.64
1.53
1.56
1.40
0.90
1.40
1.40
1.35
1.05
1.43
1.10
Mix
edVi
scos
ity,
cP
Paste
Paste
Paste
Paste
Paste
Paste
Visc
osity
,Co
mpo
nen
ts, c
P
Paste
Paste
Paste
Paste
75,0
00Pa
ste
Paste
Paste
Paste
Paste
Paste
Paste
Mix
Rat
io,
By W
t./ B
yVo
l.
100:
82/
100:
100
100:
100/
100:
100
100:
60/
100:
100
100:
100/
100:
200
100:
100/
100:
130
100:
75/
100:
100
Prod
uct
Arald
ite®
AV 1
253/
Hard
ener
HV
1253
Arald
ite®
AV 1
258/
Hard
ener
HV
1258
Arald
ite®
2013
Arald
ite®
AV 2
015
Arald
ite®
AV 8
113/
Hard
ener
HW
811
3
Arald
ie® A
W 8
535/
Hard
ener
HW
853
5
HIGH
VIS
COSI
TY
PAST
E
ADHESIVES
563Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
VANTICO
Sugg
este
d Ap
plic
atio
ns /
Com
men
ts
Very
flexib
le ad
hesiv
e th
at o
ffers
exce
llent
adh
esion
to p
olyca
rbon
ate,
nylon
and
oth
er p
lastic
s.
Flex
ible
adhe
sives
for b
ond
a wi
deva
riety
of p
lastic
s. Re
quire
s mini
mal
surfa
ce p
repa
ratio
n.
Fast-
settin
g, fle
xible
adhe
sive
for
bond
ing a
bon
ding
a wi
de va
riety
ofpla
stics
. Req
uires
mini
mal
surfa
cepr
epar
ation
.Op
ticall
y clea
r, UV
stab
le ad
hesiv
ewi
th o
utsta
nding
flexib
ility t
hat
prod
ues i
nvisi
ble b
ondli
nes o
n a
varie
ty of
subs
trate
s.
Fast-
settin
g, fle
xible
adhe
sive
with
good
sag
resis
tanc
e fo
r bon
ding
ther
mop
lastic
s and
met
als.
Max
imum
Serv
ice
Tem
p.,e
°F/°C
120/
50 140/
60 140/
60 180/
83 140/
60
Hard
ness
,Sh
ore
D
30 40 40 45 40
Coef
ficie
ntof
The
rmal
Expa
nsio
n,in
/in./°
F
8.50
x10-5
7.50
x10-5
7.50
x10-5
--- 7.50
x10-5
Ultim
ate
Tens
ileSt
reng
th,
psi
1,80
0
2,10
0
2,10
0
2,00
0
2,10
0
Elon
ga-
tion %
250
250
250
400
250
Tg,
°F/°C
115/
46 122/
50 122/
50 --- 122/
50
Lap
Shea
rSt
reng
th,d
psi @
p
si @
77°F
+ 1
80°F
+
380
600
600
175
600
1,70
0
2,80
0
2,80
0
2,00
0
2,80
0
Min
imum
Cur
e TI
me
Hrs
@
Min
@
M
in @
77°F
+
140°
F+
212
°F+
30 10 10 --- 10
120
120
60 2 90
48 16 6 48 12
Hand
ling
Stre
ngth
,b
Hrs
@77
°F+
10 4 1 1 2
Pot L
ife,
Min
@77
°F+
205
155
35 2-3
8
Spec
ific
Grav
ity,
Com
po-
nent
s
1.14
1.23
1.10
1.30
1.10
1.30
1.15
1.08
1.10
1.30
Mix
edVi
scos
ity,
cP
50,0
00
50,0
00
50,0
00
9,00
0
50,0
00
Visc
osity
,Co
mpo
nen
ts, c
P
48,0
0050
,000
50,0
0020
,000
50,0
0020
,000
13,0
001,
200
50,0
0020
,000
Mix
Rat
io,
By W
t./ B
yVo
l.
100:
108/
100:
100
80:1
00/
100:
100
80:1
00/
100:
100
100:
50/
100:
50
80:1
00/
100:
100
Prod
uct
Arald
ite®
2040
Arald
ite®
2041
Arald
ite®
2042
Urala
ne®
6100
-A/B
Arald
ite®
AV 8
680
Hard
ener
HV
8685
Sugg
este
d Ap
plic
atio
ns /
Com
men
ts
Epox
y with
goo
d pe
el str
engt
h, h
eat
resis
tanc
e an
d ch
emica
l res
istan
ce.
Thixo
tropic
, gap
-fillin
g ep
oxy w
ith g
ood
heat
, and
chem
ical r
esist
ance
.
Thixo
tropic
, flex
ible
adhe
sive
that
cure
sra
pidly
at n
orm
al ba
ke te
mpe
ratu
res.
One-
com
pone
nt e
poxy
that
cure
s ver
yqu
ickly
at n
orm
al ba
ke te
mpe
ratu
res.
Max
imum
Serv
ice
Tem
p.,e
°F/°C
284/
140
284/
140
284/
140
250/
120
Hard
ness
,Sh
ore
D
85 84 85 85
Coef
ficie
ntof
The
rmal
Expa
nsio
n,in
/in./°
F
3.29
x10-5
3.45
x10-5
3.89
x10-5
4.00
x10-5
Ultim
ate
Tens
ileSt
reng
th,
psi
6,30
0
8,40
0
7,50
0
4,90
0
Elon
ga-
tion %
5 9 7 3
Tg,
°F/°C
264/
129
235/
113
212/
100
203/
95
Lap
Shea
rSt
reng
th,d
psi @
p
si @
77°F
+ 1
80°F
+
3,30
0
3,50
0
2,80
0
2,30
0
4,00
0
4,25
0
3,10
0
2,90
0
Min
imum
Cur
e TI
me
Hrs
@
Min
@
M
in @
77°F
+
140°
F+
212
°F+
10 10 30 5
30 30 45 15
45 60 60 45
Spec
ific
Grav
ity
1.13
1.18
1.44
1.29
Visc
osity
,cP
90,0
00
Paste
300,
000
210,
000
Mix
Rat
io
One-
com
pone
nt
One-
com
pone
nt
One-
com
pone
nt
One-
com
pone
nt
Prod
uct
Arald
ite®
AV 11
8
Arald
ite®
AV 11
9
Arald
ite®
AV 3
131
Arald
ite®
AV 8
551
Two-
com
pone
nt P
olyu
reth
ane
Adh
esiv
es
One
-com
pone
nt E
poxy
Adh
esiv
es
HYSOLHENKEL
564 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
RTM Resins Service Temperature Pot Life (minutes)Hysol EA9150 Resin 250°F/121°C 480
Tough High Strain Pastes Service Temperature Bell Peel (77°F/25°C)Hysol EA9309.3NA 180°F/82°C 75 (pli)/335 (N/25mm)Hysol EA9313 120°F/82°C 50 (pli)/225 (N/25mm)Hysol EA9320NA >180°F/82°C 35 (pli)/150 (N/25mm)Hysol EA9330 180°F/82°C 60 (pli)/265 (N/25mm)Hysol EA9330.3 180°F/82°C 60 (pli)/265 (N/25mm)Hysol EA9346.5 300°F/149°C 60 (pli)/265 (N/25mm)Hysol EA9359.3 200°F/93°C 75 (pli)/335 (N/25mm)Hysol EA9360 >225°F/107°C 60 (pli)/265 (N/25mm)Hysol EA9361 140°F/60°C 35 (pli)/150 (N/25mm)Hysol EA9371 180°F/82°C 15 (pli)/70 (N/25mm)
High Temperature Filled Pastes Service Temperature Pot Life (minutes) Hysol EA934NA 300°F/149°C 40Hysol EA9321 250°F/121°C 40Hysol EA9392 350°F/177°C 75Hysol EA9394 350°F/177°C 100Hysol EA9394/C-2 450°F/232°C 480Hysol EA9395 350°F/177°C 100
Liquid Shims Service Temperature Pot Life (minutes) Hysol EA934NA 300°F/149°C 40Hysol EA9360 >225°F/107°C 40Hysol EA9377 >200°F/93°C 60Hysol EA9394 350°F/177°C 100Hysol EA9394.2 225°F/107°C 15
Low Viscosity Wet Lay-up Pastes Cure Temperature Pot Life (minutes) Hysol EA956 77°F/25°C; 200°F/93°C 30Hysol EA9390 200°F/93°C 120Hysol EA9696 77°F/25°C; 150°F/66°C 75Hysol EA9396/C-2 200°F/93°C 480
Syntactics and Low-Density Pastes Service Temperature DensityHysol EA960F 160°F/71°C N/AHysol EA9396.6MD 300°F/149°C 37 (pcf)/0.60 (g/cc)Hysol EATF3056 77°F/25°C 30 (pcf)/0.48 (g/cc)Frekote®Mold Release All Frekote products
250° Service Metal Bonding Films Service Temperature Honeycomb Climbing Drum PeelHysol EA9602.3 250°F/121°C 20 (in.lb./in.)/90 (Nmm/mm)Hysol EA9628 250°F/121°C 18 (in.lb./in.)/80 (Nmm/mm)Hysol EA9628H 250°F/121°C 20 (in.lb./in.)/90 (Nmm/mm)Hysol EA9696 250°F/121°C 25 (in.lb./in.)/110 (Nmm/mm)
300° Service Composite Bonding Films Service Temperature Outtime (days @ 77°F/25°C)Hysol EA9695 >300°F/149°C 90
High Temperature Engine Nacelle Films Service Temperature Outtime (days @ 77°F/25°C)Hysol EA9657 400°F/204°C 15Hysol EA9673 (BMI) 550°F/288°C 30Hysol EA9689 420°F/216°C 10
Core Splices Service Temperature Expansion RatioHysol EA9833.1 (BMI) 450°F/232°C 2-3xSynSpand 9899 350°F/177°C 2-6xSynSpand 9899.1CF 350°F/177°C 1-2x
Syntactic Films Service Temperature DensitySynCore 9823.1 250°F/121°C 42 (pcf)/0.67 (g/cc)SynCore 9899.1CF 350°F/177°C 42 (pcf)/0.67 (g/cc)
Expanding Syntactic Films - Core Fills Service Temperature DensitySynSpand 9899 350°F/177°C 8-15 (pcf)/0.12-0.40 (g/cc)SynSpand 9899.1CF 350°F/177°C 23-37 (pcf)/0.37-0.59 (g/cc)
Jet Engine Abradable Seals Service Temperature Outtime (days @ 77°F/25°C)SynSpand EA 9890 180°F/82°C 15
Composite Surfacing Films Service Temperature Outtime (days @ 77°F/25°C)SynSkin HC 9837.1 350°F/177°C 90
565Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
TEMPOAIRCRAFT COATINGS
Tempo Aircraft Coatings
PREMIUM QUALITY AEROSOLPAINTS AND MAINTENANCE PRODUCTSFOR A VARIETY OF APPLICATIONS.
HIGH VISIBILITYFLORESCENTFor maximum visibility.18-1301 Red orange18-1302 Sunset Gold18-1303 Lemon Yellow
O.S.H.A. ENAMELComputer matched to governmentspecifications.
10-1901 “Fire” Red
10-1902 “Dangerous” Orange
10-1903 “Caution” Yellow
10-1904 “Safety” Green
10-1905 “ Warning” Blue
10-1906 “Sign:” Black
10-1907 “Traffic” White
ENGINE ENAMELResist heat to 500°F.
200 Chevrolet Orange201 Chevrolet Blue202 Universal Black205 Old Ford Blue207 Aluminum209 Universal Red219 Lycoming Gray228 Gray Engine
Primer229 Clear230 Flat Black239 Olds Continental
Gold
SPRAY PAINTTEMPO
566 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
AIRCRAFT LACQUERDries in under 15 minutes
Tempo’s Aircraft Lacquer is ideal when a veryfast dry is requires. This blended nitrocelluloselacquer formula can be applied to all interior andexterior aluminum and steel surfaces, includingwheels, landing gear and inside door hatches.When additional corrosion protection is required,we recommend Tempo Aircraft Enamel.
ZINC CHROMATE AND ZINCOXIDE PRIMERSMaximum, adhesion and bare aluminum andsteel
Tempo’s Zinc Chromate and Zinc Oxide Primersare recommended from priming bare metal.These primers provide maximum bonding to barealuminum and steel. Tempo’s Zinc Chromate hasbeen the workhorse in the aviation industry formany years, while Zinc Oxide has been recentlyintroduced to provide a “safer, healthier”alternative to Zinc Chromate with equalperformance. Unique Fanspray Valve.
AIRCRAFT ENAMELExcellent adhesion to aluminum and steel
Tempo’s Aircraft enamel has been speciallyformulated to adhere to aluminum andsteel;providing excellent corrosion resistance.Recommended applications are all interior andexterior aluminum and steel surfaces, includingwheel, landing gear and inside door hatches. Forpropeller blades, we recommend our EpoxyPropeller Coating.
PROTECTS ALUMINUM AND STEELSURFACES AGAINST CORROSION
Extends blade life
EPOXY PROPELLER COATING
Tempo’s Epoxy Propeller Coating is formulatedwith the extra adhesion and abrasion resistanceneeded to protect propellers from corrosion andwear. Compared to standard enamel and lacquerpaints, our epoxy formula stays on the blade moreflying hours; hence, with regular use, this formulacan extend blade life.
Unique Fanspray Valve
AIRCRAFT PRIMERS-ZINC OXIDE
A801 YellowA802 Green
AIRCRAFT LACQUER
A808 Dull AluminumA810 Flat BlackA9-180 White
AIRCRAFT PRIMERS- ZINC CHROMATE
A7-6889 YellowA7-6889A Green
AIRCRAFT ENGINE ENAMEL
A207 AluminumA219 Lycoming GrayA239 Old continental GoldA240 Lycoming BlueA241 Gloss Black
EPOXY PROPELLER COATINGP/N
A150 Flat BlackA151 Medium Gray
(Matches Hartzell OE Gray)A152 WhiteA153 RedA154 Yellow
AIRCRAFT ENAMELP/N
A1100 BlackA1102 Flat BlackA1107 Flat WhiteA1109 Gloss WhiteA1120 RedA1140 AluminumA1105 Medium GrayA1114 Sand
ALUMI-GRIP PAINT
567Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
US PAINT
Recommended Coating Systems - AviationSYSTEM One - Alodine
SURFACE PREPARATIONAWLGRIP® ALUMIGRIP®
• AWL-PREP (R) SURFACE CLEANER (T0008)• Etch and deoxidize with ALUMIPREP(R) 33 (73001)• Chrome Conversion Coating:ALONDINE(R) 1201 (73003)
PRIMER:ALONDINE 120130-Y-94 (TM) Non-Sanding Mil-Spec, Anti-Corrosive Epoxy Primer (Meets MIL-P-23377D) S9001 mixed 1:1by volume with S3001, reduced as necessary with up to 1 part T0006. 6/10 to 9/10 mils (15 to 23 microns)dry film thickness/1 coat.
or
• ALUMIGARD(r) U9003 is mixed with G3001, 2:1 then reduce with 1 part T0086 Reducer. 7/10 to 1 mils dryper coat (15-25 microns).
(Bare Substrate)
Alumiprep 33
FAST DRY PRIMER SURFACER (If Needed)
AWLGRIP(R)/ALUMIGRIP(R)TOPCOAT
PRIMER SURFACING: (IF NEEDED)• Fast Dry Polyurethane Surfacer--G8005 mixed 2:1 by volume with G3001, reduced 10-15% with T0003 2 to 3 mils (50-75microns) total dry film thickness, maximum is 2 coats.
30-Y-94 (TM) PRIMER
or
ALUMIGARD PRIMER
TOPCOAT:• AWLGRIP (r)/AULUMIGRIP(r) Polyester Urethane Topcoat (See Stock List for codes.)• Mixed 1:1 by volume with G3010 reduced with 20-25% of T0003 or T0001, 2-3 mils (50to 75 microns) totaldry film thickness/2 coats.
(Bare Substrate)
SYSTEM Two - Non-Alodine
ZINC CHROMATE WASH PRIMER
ALUMIPREP (R) 33 SURFACE PREPARATION:-AWL-PREP (R) Surface Cleaner (T0008)-Etch and deoxidize with ALUMIPREP(r) 33 (73001)
INITIAL PRIMING:Zinc Chromate Wash Primer G9072 is mixed 1:1 with G3014. 2/10-3/10 (5-7) microns) dry film thickness/1coat only.-ALUMIGARD(r) u9003 is mixed with G3001, 2:1 then reduce with 1 part T0086 Reducer. 7/10 to 1 mils dryper coat.
PRIMER SURFACING : (If needed)-Fast Dry Polyurethane Surfacer--G8005 mixed 2:1 by volume with G3001, reduced 10-15% with T0003. 2 to3 mils (50-75 micr9ons) total dry film thickness, maximum is 2 coats.
TOPCOAT:-AWLGRIP(R)/ALUMIGRIP(R) Polyester Urethane Topcoat (See Stock List for codes.)-Mixed 1:1 by volume with G3010 reduced with 20-25% of T0003 or T0002 or T0001 2-3 mils DFT (50-75microns ) total dry film thickness/ 2 coats.
AWLGRIP(R)/ALUMIGRIP(R)TOPCOAT
FAST DRY SURFACER (If Needed)
ALUMIGARD
ALUMI-GRIP PAINTUS PAINT
568 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
COLOR LEAD FREE (LF) AWLGRIP®ALUMIGRIP®
PRICECATEGORY LEAD FREE (LF) AWLCRAFT®
2000PRICE
CATEGORY
Clea
rs
AWLCRAFT 2000 Clear LF ¤ LF F3029 A
AWL-BRITE Plus LF J3005 ¤
High Gloss Clear LF G3005 ¤
Low Solid Clear LF G3003 ¤
Whi
tes
Blue Tone White LF G8212 ‡ C LF F8015 C
Chevy White LF H8086 ‡ B
Cloud White LF G8089 ‡
Cream LF H8002 ‡ B LF F8016 B
Egg Shell White LF H8015 ‡ B LF F8017 B
Fleet White LF H8087 ‡ C
Insignia White LF G8022 ‡ B
Matterhorn White LF G8003 ‡ A LF F8024 A
Off-White Revisited LF G8009 ‡ B
Off White LF G8010 ‡ A LF F8020 A
Oyster White H8010 § B
Oyster White LF H8139 ‡ C F8116 B
Snow White LF G8044 ‡ B LF F8063 B
Stark White LF H8208 ‡ B LF F8155 B
Vestal White LF G8004 ‡ B LF F8018 B
Gray
s
Dark Gray G1002 § B
Dark Gray LF G1344 ‡ B
Graystone LF G1040 ‡ B
Kingston Gray G1009 § B
Kingston Gray LF G1359 ‡ C
Light Gray LF G1001 ‡ B LF F1007 B
Medium Gray LF G1007 ‡ B
Pearl Gray LF G1008 ‡ B
Whisper Gray LF G8035 ‡ C
Blac
ks
Flat Black (Spray Only 2:1:1) LF G2002 ¤ B
Gloss Black LF G2001 ¤ A
Super Jet Black LF G2017 ‡ A LF F2091 A
Blue
s
Aristo Blue LF G5003 ‡ C LF F5010 C
Empress Blue LF G5041 ‡ E
Flag Blue LF G5002 ‡ C LF F5014 C
Ice Blue LF H5004 ‡ C
Marlin Blue LF G5011 ‡ D
Navy Blue LF G5001 ‡ C LF F5028 C
Royal Blue LF G5007 ‡ B
Sky Blue LF G5014 ‡ C
Stars & Stripes Blue LF H5161 ‡ C
‡ = On October 1996 Color Card and currently carried in stock¤ = Currently carried in stock, but not included on October 1996 Color Card§ = Not to be stocked when current stocks of AWLGRIP®/ALUMIGRIP® ARED depleted.
ALUMI-GRIP PAINT
569Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
US PAINT
CLEANINGAWL-PREP(R) Surface Cleaner T0008AWL-PREP(R) PLUS Wax & Grease Remover T0115
CORROSION INHIBITING SURFACE TREATMENT(for Aluminum)
ALUMIPREP(R) 33 73001ALODINE® 1201 30003
FAIRING-SURFACINGAWL-FAIR(R) L.W. Epoxy Trowelable Fairing Compound*Approximately 13 square feet per mixed gallon at 1/8” DFT.
Base: D8020 WhiteMix Converter D7007 Red1:1 Reducer None
Epoxy Sprayable Fairing Compound*Approximately 1,100 sq.ftt. at 1 mil DFT.
Base: D6001 TanMix Converter D30111:1 Reducer T0006
ULTRA-BUILD® Ultra High Build Epoxy Primer*Approximately 55 square feet per gallon;15-20 mils (375-500 microns) dry film thickness per coat.
Base: D8008 WhiteMix Converter D30181:1 Reducer T0073
High Build Epoxy Primer*Approximately 135 square feet per mixed gallon;5-7 mils (125-175 microns) dry film thickness percoat.
Bases: D8002 Off WhiteD9002 Yellow
Mix Converter D30021:1 Reducer T0006
T0031 (Brush)
AWL-QUIK® Fast Recoat Sanding Surfacer*Approximately 255 square feet per mixed gallon;2-3 mils (50-75 microns) dry film thickness percoat.
Base: D8003 Off WhiteMix Converter D90011:1 Reducer T0006 (Spray)
PRIMERS-SEALERSZinc Chromate Wash Primer*Approximately 267 to 400 square feet ;2/10-3/10 mils (microns) dry film thickness/only one coat.Mix Base: D9072 Yellow1:1 Acid Reducer G3014
30-Y-94™ Non-Sanding, Mil-Spec Anti-Corrosive Epoxy Primer*Approximately 250 square feet per mixed gallon;6/10 to 9/10 mils (5-23 microns) dry filmthickness/only one coat.
Base: S9001 Mix Converter S3001
1:1 Reducer T0006
ALUMIGARD®*Approximately 360 square feet per mixed gallon;7/10 - 1 mils (15-25 microns) dry per coat/onlyone coat.
Base: U9003 Mix Converter G3001
2:1 Reducer T0086
545™ Epoxy Primers*Approximately 200 feet per mixed gallon;2-3 mils (50-75 microns) dry per coat.
Bases: D1001 GrayD8001 White
Mix Converter G30011:1 Reducer T0006 (Spray)
T0031 (Brush)
Fast Dry Polyurethane Primer Surfacer*Approximately 186 to 292 square feet ;2-3 mils (50-75 microns) dry film thickness percoat.
Base: G8005 WhiteMix Converter G30012:1 Reducer T0003
PRIMER REDUCERST0006 - Standard - SprayT0031 - Slow -Brush Only *(AWLGRIP® 545& AWL-QUIK®T0073 - ULTRA-BUILD®T0086 - ALUMIGARD® Reducer
TOPCOAT REDUCERST0001 - FastT0002 - Very FastT0003 - MediumT0005 - Slow - Hot Weather RetarderT0031 - Brushing /Slow
TOPCOATINGSPRAY:*Approximately 210 square feet per mixed gallon.
Full Gloss AWLGRIP®/ALUMIGRIP® Base Selected from Stock List:1:1 Converter :AWL-CAT® #2 (G3010)
Reducer: T0003 or T0002 or T0001
BRUSH:*Approximately 300-350 square feet per mixed gallon.
Full Gloss AWLGRIP®/ALUMIGRIP® Base 2:1 Converter: AWL-CAT® #3 (H3002)
Reducer:T0031
AUXILIARY PRODUCTSGRIPTEX® - Coarse Grit Non-Skid Additive 73013GRIPTEX® - Fine Grit Non-Skid Additive 73012Premium Tack Rags 73009PRO-CURE® X-98 Fast Accelerator 73014PRO-CURE® X-138 Inhibited Accelerator 730151010 Flattening Agent for Urethane Topcoats G3013CRATER-X® Fisheye Eliminatory & Anti-Contaminant M1017COLD CURE™ 545 Primer Accelerator M3066SPATTER-IT® Texturing Additive M3048
* Coverage Calculations are based on theoretical transfer efficiency of 100% atrecommended dry film thickness. Actual coverage rate obtained will vary according toequipment choice, application techniques, part size, and application environment.
CAUTIONDo not apply any of these products to a hot surface and avoid applying in direct sunlight. Do not recoatthe AWLGRIP® 545, Wash Primer, AWL-QUIK®, ULTRA_BUILD®, or HIGH BUILD Epoxy Primers untilthe coating is hard, fully cured, and all solvents have evaporated.
IMPORTANT!Read all warnings and precautions on the labels of all products being blended as the combination maycontain the hazards of each component. Technical Product Data Bulletins, Material Safety Data Sheets,and Marine Application Guide are available on request for each AWL_GRIP® Product.
WARNING!Do not incorporate into the AWLGRIP®/ALUMIGRIP® Coating System, thinners, additives, modifiers,converters, or related products produced by any manufacturer other than U.S. PAINT. Such additivescan jeopardize the unique chemical characteristics provided by the AWLGRIP®/ALUMIGRIP® CoatingSystems.
FOR PROFESSIONAL USE ONLY!The information presented herein, while not not guaranteed, is the best of our knowledge true andaccurate. No warranty or guarantee expressed or implied is made regarding the performance of anyproduct, since the manner of use is beyond our control. No suggestion for product use, nor anythingcontained herein, shall be construed as a recommendation for its use in infringement or any existingpatent, and U.S. PAINT assumes no responsibility or liability for operations that do infringe any suchpatents.
AWLGRIP(R) AND ALUMIGRIP(R) Product Checklist
ALUMI-GRIP PAINTUS PAINT
570 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
COLOR LEAD FREE (LF) AWLGRIP®ALUMIGRIP®
PRICECATEGORY LEAD FREE (LF) AWLCRAFT®
2000PRICE
CATEGORY
Gree
ns
Forest Green LF H4094 ‡ DJade Mist Green LF H4089 ‡ F F4012 FKelly Green G4034 § DKelly Green LF H4302 ‡ ETeal LF H5328 ‡ FSea Foam LF H4256 ‡ F
Yello
ws
Air Ag Yellow G9046 ¤ CFederal Yellow LF G9298 ‡ GFighting Lady Yellow LF G9093 ‡ DSan Mateo Wheat LF G9001 ‡ C LF F9014 CSun Yellow G9028 § C LF F9010 CSun Yellow LF G9337 ‡ D
Reds
, Ora
nges
, Pur
ples
Claret LF G7305 ‡ G LF F7029 GHot Pink LF H7268 ‡ FInternational Orange G7029 § DInternational Orange LF G7362 ‡ EMaroon LF H7267 ‡ GRed Mahogany LF G7022 ‡ GSunfast Red G7001 § F F7011 FSunfast Red LF G7214 ‡ GToreador Red G7037 § FToreador Red LF H7161 ‡ GViolet LF H7269 ‡ FVivid Red G7008 § GVivid Red LF G7367 ‡ GVenetian Red LF G6015 § F
Tans
, Bro
wns
Castle Tan LF G6006 ‡ BDesert Sand G6002 § CDesert Sand LF H6160 ‡ DMoon Dust LF G6004 ‡ B LF F6102 BOlive Drab G4002 § COlive Drab LF G4216 ‡ CPrairie Beige LF G6003 ‡ CSable Brown LF G6001 ‡ BSahara Tan LF G6009 ‡ C
Met
allic
s
Bright Aluminum LF H1021 ‡ BCordovan Gold (Powder) LF 73011 ‡ *Pale Gold (Powder) LF 73010 ‡ *Silver LF H1048 ‡ C
CODE DESCRIPTIONG3010 SWL-CAT #2 Std Topcoat Converter for Spray Application
H3002 SWL-CAT #3 Brushing Topcoat Converter
H3010 SWL-CAT #4 Spray Converter for Custom Flat and Semi-Gloss Polyester Urethane Topcoats
G3004 SWL-CAT #12 G3003 Clear Urethane Topcoat Converter for Spray Application
TOPCOAT CONVERTERS
‡ = On October 1996 Color Card and currently carried in stock¤ = Currently carried in stock, but not included on October 1996 Color Card§ = Not to be stocked when current stocks of AWLGRIP®/ALUMIGRIP® ARED depleted.
* Dry powder products are on price list under auxiliary products.
SPOTCHECK
571Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
MAGNAFLUX
Spotcheck penetrantsSpotcheck red dye Liquid Penetrant materials are perfect for weld inspection and,as the name implies, “spot checking” to locate surface flaws.• Ideal for applications where portability is required• Available in aerosol or liquid form• The vivid red colour permits daylight inspection• Meets major military specifications• A complete line of cleaner removers and developers, as well as Water Wash
or Post Emulsifiable penetrants are available
Application Instructions forAerosols & Powders
Preclean inspection area. Spray onCleaner/Remover. Wipe off with cloth.
Apply Penetrant. Allow shortpenetration period.
Spray Cleaner/Remover on wipingtowel and wipe surface clean.
Spray on a thin, uniform film ofDeveloper
Inspect. Defects will show as brightred lines in white developer
background
Red Dye PenetrantsType Product Cleaner Developer Flash Point Description
Post Emulsifiable Penetrants SKL-SP* SKC-S*SKC-HF*123 Cleaner
SKD-S2*ZP-5B
>200°F (93°C) Most widely used, general purpose solventremovable penetrant.
Water Washable Penetrants SKL-WP* Not required SKD-S2*ZP-5B
>200°F (93°C) General purpose water washable penetrant.
Water Base Penetrants SKL-4C Not required SKD-S2* Non-flammable Bright red in daylight; fluorescent orange in UVlight. Liquid oxygen compatible. Used as a leakdetector and for inspection of plastics.
DevelopersType Product Flash Point Description
Solvent Developers Non-chlorinated SKD-S2* 2°F (-17°C) Meets major requirements for special alloy and nuclear applications.
Aqueous Developers Water Suspendible ZP-5B Non-flammable General purpose water suspendible developer.
Cleaners/RemoversType Product Flash Point Description
Non-chlorinated SKC-S* 54°F (12°C) The recommended general purpose cleaner/remover. Non-chlorinated. Flammable.Meets major requirements for special alloys and nuclear applications.
SKC-HF* 125°F (51°C) High flash point. Low odour cleaner/remover. Meets sulfur and chlorine requirementsof major specifications.
Aqueous Based 123 Cleaner 220°F (104°C) Aqueous based cleaner for precleaning and post-cleaning. Low sulfur and chlorinecontent. Non-flammable.
123 Cleaner Wipes N/A Pre-moistened durable towels for precleaning of parts and removal of penetrants.
Specification CompliancePenetrants Cleaners Developers
SKL-SP SKL-WP SKL-4C SKC-5 SKC-HF 123 SKD-S2 ZP-58MIL-I-25135 Rev. E** X X X X X X XMIL-STD-6866 X X X X X X XMIL-STD-271 X X X X X X XMIL-STD-2132 X X X X X X XAECL X X X X X X XASME B & PV Code, Sec. V X X X X X X X XASTM E 165 X X X X X X X XBoeing BAC 5423 PSD 6-46 or 8-4 X X X X X XGeneral Electric P50YP107 X X X X X XMcDonnell Douglas PS-21202 X X X X X XNAVSEA 250-1500-1 X X X X X
* Available in aerosol cans. ** Supercedes MIL-I-25135 Rev. C & DWARNING: Penetrants attack and even dissolve many kinds of plastic pipes. Polyvinyl chloride (PVC) pip is especially vulnerable and can crumble after only a few days ofexposure. Even diluted penetrant rinsings attack it rapidly. ABS plastic pipe is nearly as sensitive. When installing plumbing to handle penetrant rinsings, use metal pipe.
572 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
CHEMICALS/MISC. SUPPLIES
Mek chemicalsMethyl Ethyl Ketone (MEK) is a general thinner for cements, adhesives and finishes.
Part Number Description1100-2 Methyl ethyl ketone 1 gal.1100-3 Methyl ethyl ketone 5 gal.
Alodine® 1001Qualified and approved for MIL-C-5541, Class 3, Form I,immersion spray.Brush-on chemical to condition aluminum for clear finish andcorrosion resistance. Maintains the original aluminumappearance.
Part Number Description1001 GL Gallon
Alodine® 1201Qualified and approved for MIL-C-5541, Class 1A, Form III ,Brush.Gold chromate conversion coating for aluminum. Providespremier corrosion resistance and paint adhesion.
Part Number Description1201 GL Gallon
Alumiprep 33®Cleaner, brightener and pre-paint conditioner for aluminum.Provides an excellent surface for application of Alodines.
Part Number DescriptionAlumiprep 33GL Gallon
Par-Al-KetoneConforms to MIL-C-6708, Type I, and navy aero spec. RM-61.An excellent corrosion inhibitor for use on exterior surfaces ofparts that are subject to severe exposure. Can be sprayed,dipped or brushed on. Cold application. Has minimum flash pointof 100°F.
Part Number DescriptionPARALKETON GL GallonPARALKETON QT Quart
TolueneP/N 1500-2 (Gal)P/N 1500-3 (5 Gal)
AcetoneP/N 1200-2 (Gal)
Isopropyl AlcoholP/N IPA (5 Gal)
MethanolP/N Methanol (5 Gal)
Hylomar jointing compoundDefense specification DTD 900/4586A universal jointing compound for use on metal to metal joint faces. Temperature range -50°C to 300°C. Resistant to air, turbine and piston engine combustion products, water,glycol/water and methanol/water mixtures, petroleum and synthetic diester lube oils, gasand kerosene fuels, fluorocarbon refrigerants. Non-flammable, non-hardening; remainsplastic in the joint. Different grades are determined by the amount of solvent. Hylomar AeroGrade is a highly engineered gasketing compound for use in the aerospace industry. It ismanufactured under license from Rolls Royce PLC to their manufacturing specificationMSRR9055.
Part Number DescriptionPL32M 4 oz. medium
EZ Turn lubricantEZ Turn is a specialty lubricant/sealant used for fuel and oil linevalves. It is especially effective where high octane fuels andaromatics are present. EZ Turn is also extremely effective as agasket paste and anti-seize agent. EZ Turn is an anti-gumcompound and will not crack or dry out. Temperature Range -10°F to 400°F. Meets MIL-G-60320 AM1TY1.
Part Number DescriptionEZTURN 1LB 1 lb.
ADHESIVES & SEALANTS
MISC. SUPPLIES
573Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
SealubeAnti-seize sealer for threaded aluminum alloy parts exposed togasoline, oil, water, ethylene glycol, air or vacuum. Good lubricatingqualities; will not harden or set; will not freeze joints at lowtemperatures. Non-corrosive. Colour yellow-brown. Temperaturerange -70°F to 160°F.
Part Number DescriptionSEALUBE 1 lb. can
PlastilubePlastilube 3 and Plastilube Moly 3 are high-temperature greasescomprised of super-refined mineral oils molecularly bonded to aninert bentonite-type base, and devoid of metallic soap or fatty acids.They are water-insoluble and will absorb 50% of its weight in waterwithout breakdown or impairment of lubrication properties. PlastilubeMoly 3 has the added benefit of 3% molybdenum disulfide.
Part Number Description SizePLASTILUBE#3M Plastilube moly 3 14 oz. tubePLASTILUBE#3 Plastillube 3 14 oz. tube
Lubribond 220Lubribond 220 MIL-L-23398D & MIL-L46147A.Lubribond 220 is corrosion resistant air dry lubricant. Long wear lifeat high loads. Contains no graphite.
Part Number Description220-12OZ Lubribond 12 oz. spray
Lubriplate 630AAFor multipurpose grease type lubrications, exceptional high filmstrength; melting point 340°F.
Part Number Description630AA 14 oz. can
Lubriplate 130AAGeneral purpose type; special adhesive high film strength; meltingpoint, 190°F. Exceedingly water resistant.
Part Number Description130AA 14 oz. can
Mouse Milk oilMouse milk oil is called out by AiResearch, Continental, Lycoming,Beechcraft and Cessna for use in freeing turbine waste gate shafts.
Part Number DescriptionMOUSEMILK 80Z 80 oz.
Sherlock leak detector fluidPrecision-made, neutral compounds for leak testing oxygen andair lines, cylinders, tanks, fuel lines, pneumatic controls andsealed components.
Type I - For use from +35°F to +160°FType II - For use from -65°F to +35°F
Part Number DescriptionMIL-L-25567E Type I leak detector 8 oz.
Metalset A4 aluminum filled epoxy resin cementMeets military specifications MMM-A-1754 & MMM-A-134 Type 3.Metalset A4™ is a powerful epoxy adhesive that has been used for years by all branches of theU.S. military as well as every major airline and auto manufacturer in the world. A4 is used forhundreds of industrial bonding applications and offers excellent adhesion to porous or non-poroussurfaces. It can be applied to vertical surfaces without sagging and cures overnight with negligibleshrinking. Application include stopping leaks in pipes, valves and tanks, bonding like and unlikesurfaces, filling metal joints, dents, etc., anchoring bolts in wood, concrete, repairing metalsurfaces.
Part Number DescriptionA4-11OZ 11 oz. Metalset
AVL anti-icing/de-icing fluidProduced to aircraft material specification DTD 406Bstandards.Fluid for TKS ice protection systems. An ethylene glycol basedformula for application on all aircraft equipped with the TKSsystem.
Part Number DescriptionAVL-TKS-2.5GL 2.5 gal.AVL-TKS-5GL 5 gal.AVL-TKS-55GL 55 gal.
MISCELLANEOUS CHEMICALS
MISC. SUPPLIES
574 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Tri-5 Tri-FlowPenetrating lubricant with Teflon®, corrosion inhibitors, moisturedisplacers and solvents to soften and remove dirt and corrosion. Willnot cause corrosion. Use on aircraft cabin door hinges, landing gearhinges, and struts. Loosens rusted bolts and other fasteners.
Part Number Description Package20007 Tri-flow 12 oz.26000 Tri-flow 1 gal.
Aero KroilThe oil that creeps into openings as small as one millionth of aninch. Kroil will loosen metal joints in a few minutes time, savinglabour, equipment and temper. It dissolves gum, dried grease andoil, removes rust and carbon deposits without attacking the metal.
Part Number DescriptionAEROKROIL 10 oz.AEROKROIL 13 oz.
Corrosion XApplications: Battery terminals, hinges, cables, rotor heads and trimdrum actuators. Also, electrical and avionics components such asmicroswitches, cannon plugs, antenna based, circuit breakers andbuss bars. MIL-C-81309E Type III.
Part Number DescriptionCX 16OZ 16 oz.CX GAL 1 gal.CX 5GAL 5 gal.
ACF-50Active Thin Fluid Film penetrates corrosion deposits, emulsifies anddisplaces the electrolyte. Contains no wax, resin, silicon or teflon togum up mechanisms or trap moisture.MIL-C-81309E Type II, BMS 3-23.
Part Number DescriptionACF50-13OZ 13 oz.ACF50-GL 1 gal.
Gum remover/Freeze spray
Part Number DescriptionGUMGO 7 oz.
WD-40Lubricates moving parts, such as: hinges, wheels, rollers, chains andgears. Cleans most surfaces of: grease, grime, tar, adhesives, gum,tape, crayon, scuff marks and water deposits. Penetrates to freestuck parts.
Part Number DescriptionWD40-16OZ 16 oz.WD40-GL 1 gal.
TribolubeFlourinated Grease. This new and improved formulation conforms tothe new spec, MIL-PRF-83261B.
Part Number DescriptionTRIBOLUBE2-N 4 oz. tube
NyosilSilicone fluid.
Part Number DescriptionM25 1 liter
WC393Thrust Reverser Lubricant. Use in areas of high temperatures andfriction. Contains no grease, wax, silicone or graphite. Non-corrosive,non-gumming film of molybdenum disulfide. Contains synthetic oil.
Part Number DescriptionWC393 12 oz.
MISC. SUPPLIES
575Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
DetolDisinfectant.
Part Number DescriptionDETOL 1000 ml
LysolDisinfectant.
Part Number DescriptionLYSOL 350 g spray
Distilled Water
Part Number DescriptionDW 4 L
SafetywalkSafetywalk anti-slip tread, diamond hand mineral top surfacefeatures an adhesive backing that makes it easy to apply forimmediate use.
Part Number Description30007 6” x 60’30008 12” x 60”
BIOBOR JFBIOBOR JF Fuel Fungicide.Very powerful fungicide designed to kill microorganisms that createslime in fuel. May be used with Prist. Not a deicer or waterdispersant. Follow mixing instructions in Service Bulletin 978.
Part NumberBIOBOR-JF
Wing Walk CompoundProvides anti-skid surface on aircraft wings, ground supportequipment, floors, stairs, walkways, ramps, driveways, loadingdocks, shop areas and boats. NO PRIMER OR THINNER USED.ROLL OR BRUSH DIRECTLY ON DESIRED SURFACE. MIL-W-5044, Type II.
Part Number DescriptionX1567-QT 1 quartX1567-GL 1 gal.
Prist Hi-FlashAnti-icing aviation fuel additive.
Safer and easier to handle than conventional anti-icing fueladditives.
PPG Industries developed Prist® Hi-Flash™ anti-icing aviation fueladditive to meet the new demands of the aviation industry. Next-generation Hi-Flash is less toxic, less volatile and much easier touse than conventional additives. It’s also from PPG, an aviationleader for more than six decades.
Fully Authorized.
Prist Hi-Flash anti-icing aviation fuel additive is authorized by theUnited States Armed Forces under Military Specification MIL-I-85470(A), and by the ASTM under Standard D4171 for use incivilian jet fuels as a fuel system icing inhibitor. As part of its ASTMapproval process, the formulation of Prist Hi-Flash was reviewed andapproved by turbine engine and turbine engine airframemanufacturers worldwide.
Prist Hi-Flash is recommended for every refueling at a dosage rateof 0.1% minimum to 0.15% maximum by volume. For yourconvenience, Prist Hi-Flash comes in four package sizes.
• 5 gallon pail - Enough to treat 5000 gallons of fuel.• 55 gallon drum - For the most economical bulk treatment of fuel.• 20 oz. Hi-Flo aerosol can.
Stock Number
Volume perPackage
U.S. Liters
Shipping UnitGross Weight
Lbs. Kg
Net Weight perPackage
Lbs. Kg
Net Weight perShipping Unit
Lbs. Kg
35737 55 gal. 208.2 1 515 233.6 469 212.7 469 12.7
44637 5 gal. 18.9 1 45 20.5 42 19.0 42 19.0
36437 20 oz. 0.592 24 cans/case,6 can packs 43 19.5 1.25 0.57 30 13.6
84134 8 oz. 0.237 12 cans/case 8 3.6 0.5 0.23 6 2.7
MISC. SUPPLIES
576 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Quantum EyeMulti-level carbon monoxide (CO) detector.Use anywhere. Detects dangerous exhaust leaks.
Part NumberQE11-01
OziumThe best way to cleanse the air.
Part NumberOZIUM-500
Sani-Pak toilet deodorantA deodorant powder packaged in 8 gram water soluble packets fordispensing directly into the toilet tank.
Part Number DescriptionSP77006 Sani-Pak toilet deodorant.
Visial anti-static wipeFor use on instruments, in-flight entertainment screensand other glass or acrylic transparencies.
“Approved to Boeing Document D6-7127 and by AirbusIndustries.”
Part Number000410
Sani-ComPremoistened towelettes impregnated with a cleaning agent forcleaning and refreshing communication and oxygen equipment.Each towelette comes in a poly/foil packet. Packaged 200 packetsper box. 6 boxes per case.
Part Number DescriptionSC3205 Sani-Com premoistened towelettes.
577Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
MISC. SUPPLIES
SJ-3560SJ-3460 SJ-3440 SJ-3540 SJ-32550
3M™ Dual Lock™ Industrial Fastener
When 3M Dual Lock™ Industrial Fastener is pressed together, hundreds ofmushroom-shaped stems interlock with one another. An audible “snap!”announces that the fastener is locked. Excellent tensile strength results so youcan replace unsightly mechanical fasteners in many applications. Yet you canopen and close Dual Lock™ Fasteners hundreds of times.
Typical Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.
Materials Fastener: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . polyolefin . . . . . . . . . . . . . .polyolefin . . . . . . . . . . . .polyolefin . . . . . . . . . .polyolefin . . . . . . . . . .polyolefin . . . . . . . Adhesive: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . none . . . . . . . . . . . . . . . . . .VHB™ acrylic . . . . . . . .none . . . . . . . . . . . . .synthetic rubber . . . . .VHB™ acrylic . . . . Liner: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . none . . . . . . . . . . . . . . . . . .red polyolefin . . . . . . . .none . . . . . . . . . . . . .white polyolefin . . . . . .green polyolefin . .
Width, inches (mm): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 (13) . . . . . . . . . . . . . . .1/2 (13) . . . . . . . . . . . . .1/2 (13) . . . . . . . . . . .1/2 (13) . . . . . . . . . . . .1/2 (13) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (25) . . . . . . . . . . . . . . . . .1 (25) . . . . . . . . . . . . . .1 (25) . . . . . . . . . . . .1 (25) . . . . . . . . . . . . .1 (25) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 (51) . . . . . . . . . . . . . . . . .2 (51) . . . . . . . . . . . . . .2 (51) . . . . . . . . . . . .2 (51) . . . . . . . . . . . . .2 (51) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 (102) . . . . . . . . . . . . . . . .4 (102) . . . . . . . . . . . . .4 (102) . . . . . . . . . . .4 (102) . . . . . . . . . . . .4 (102) . . . . . . . . . Color: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . clear . . . . . . . . . . . . . . . . . .clear . . . . . . . . . . . . . . .black . . . . . . . . . . . . .black . . . . . . . . . . . . . .black . . . . . . . . . . . Weight, grams/1” x 1”: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 . . . . . . . . . . . . . . . . . . .1.1 . . . . . . . . . . . . . . . . .0.5 . . . . . . . . . . . . . . .0.7 . . . . . . . . . . . . . . . .0.9. . . . . . . . . . . . . (grams/25 mm x 25 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Engaged Thickness, inches (mm):. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.16 (4.1) . . . . . . . . . . . . . .0.23 (5.8) . . . . . . . . . . .0.16 (4.1) . . . . . . . . .0.23 (5.8) . . . . . . . . . .0.23 (5.8) . . . . . . . (mated to itself) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cycle Life (engaged to itself): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000+ . . . . . . . . . . . . . . . . .1000+ . . . . . . . . . . . . . .1000+ . . . . . . . . . . . .1000+ . . . . . . . . . . . . .1000+ . . . . . . . . . . U.V. Resistance (ASTM D2565): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000 hrs . . . . . . . . . . . . . . .1000 hrs . . . . . . . . . . . .1000 hrs . . . . . . . . . .not rated . . . . . . . . . . .1000 hrs . . . . . . . . (Xenon arc weatherometer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Plasticizer Resistance: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . yes . . . . . . . . . . . . . . . . . . .yes . . . . . . . . . . . . . . . .yes . . . . . . . . . . . . . .no . . . . . . . . . . . . . . . .yes . . . . . . . . . . . . Flame Resistance: FAR 25.853: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (b-2) . . . . . . . . . . . . . . . . . .(b) . . . . . . . . . . . . . . . . .(b-2) . . . . . . . . . . . . .(b-2) . . . . . . . . . . . . . .(b-2) . . . . . . . . . . .
FMVSS: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302 . . . . . . . . . . . . . . . . . . .302 . . . . . . . . . . . . . . . .302 . . . . . . . . . . . . . .302 . . . . . . . . . . . . . . .302 . . . . . . . . . . . . (SJ-3560, SJ-3540 and SJ-3550 Fasteners were tested for flame resistance after being adhered to thin metal panels).
Shelf Life:* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 year . . . . . . . . . . . . . . . . .1 year . . . . . . . . . . . . . .1 year . . . . . . . . . . . .1 year . . . . . . . . . . . . .1 year . . . . . . . . . . *One year from date of receipt by customer when stored in original packaging at 70ºF (21ºC) and 50% R.H.
Solvent Resistance: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No apparent degradation of Dual Lock Industrial Fastener when exposed to splash testing with many common . . . . . Splash testing cycle- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . solvents, including gasoline, JP-4 jet fuel, mineral spirits, motor oil, ammonia cleaner, acetone, methyl ethyl ketone20 seconds submersion- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (MEK). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 seconds air dry-3 cycles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MISC. SUPPLIES
578 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
SJ-3440SJ-3440SJ-3440 SJ-3440 SJ-3440 SJ-3540 SJ-32550
SJ-3440SJ-3440SJ-3440 SJ-3440 SJ-3440 SJ-3540 SJ-32550
3M™ Scotchmate™ Industrial Fastener
Press together. Pull apart. It’s that simple. When your product calls forthousands of easy openings and closings, 3M Scotchmate™ Industrial Fasteneris an ideal choice.
Typical Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.
Hook:
Loop:
PLAINBACKED PRESSURE SENSITIVE ADHESIVE COATED
Fastener Fabric: . . . . . . . . . . . . . . . . . . . . . .Nylon . . . . . . . . . . . . .Nylon . . . . . . . . . . . . .Nylon . . . . . . . . . . . . .Nylon . . . . . . . . . . . . .Nylon . . . . . . . . . . . . .Nylon . . . . . . . . . . . . .Nylon . . . . . . . . . .Adhesive Type: . . . . . . . . . . . . . . . . . . . . . . .None . . . . . . . . . . . . . .None . . . . . . . . . . . . . .Rubber . . . . . . . . . . . .Acrylic . . . . . . . . . . . . .Rubber . . . . . . . . . . . .Acrylic . . . . . . . . . . . .Rubber . . . . . . . . .Liner on Adhesivea: . . . . . . . . . . . . . . . . . . . .None . . . . . . . . . . . . . .None . . . . . . . . . . . . . .White . . . . . . . . . . . . .Clear . . . . . . . . . . . . . .Blue . . . . . . . . . . . . . .Clear . . . . . . . . . . . . .White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PP . . . . . . . . . . . . . . .PE . . . . . . . . . . . . . . .PP . . . . . . . . . . . . . . . .PE . . . . . . . . . . . . . . .PP . . . . . . . . . . . .
Width, Inches (mm): . . . . . . . . . . . . . . . . . . .5/8 (16) . . . . . . . . . . . .5/8 (16) . . . . . . . . . . . .5/8 (16) . . . . . . . . . . .5/8 (16) . . . . . . . . . . . .5/8 (16) . . . . . . . . . . . .5/8 (16) . . . . . . . . . . .5/8 (16) . . . . . . . . .± 1/16 in. (1.6 mm) . . . . . . . . . . . . . . . . . .3/4 (19) . . . . . . . . . . . .3/4 (19) . . . . . . . . . . . .3/4 (19) . . . . . . . . . . .3/4 (19) . . . . . . . . . . . .3/4 (19) . . . . . . . . . . . .3/4 (19) . . . . . . . . . . .3/4 (19) . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 (25) . . . . . . . . . . . . .1 (25) . . . . . . . . . . . . .1 (25) . . . . . . . . . . . . .1 (25) . . . . . . . . . . . . .1 (25) . . . . . . . . . . . . .1 (25) . . . . . . . . . . . . .1 (25) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1/2 (38) . . . . . . . . . .1 1/2 (38) . . . . . . . . . .1 1/2 (38) . . . . . . . . . .1 1/2 (38) . . . . . . . . . .1 1/2 (38) . . . . . . . . . .1 1/2 (38) . . . . . . . . . .1 1/2 (38) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 (51) . . . . . . . . . . . . .2 (51) . . . . . . . . . . . . .2 (51) . . . . . . . . . . . . .2 (51) . . . . . . . . . . . . .2 (51) . . . . . . . . . . . . .2 (51) . . . . . . . . . . . . .2 (51) . . . . . . . . . .
Standard Colorsb: . . . . . . . . . . . . . . . . . . . . .Black . . . . . . . . . . . . .Black . . . . . . . . . . . . .Black . . . . . . . . . . . . .Black . . . . . . . . . . . . .Black . . . . . . . . . . . . . .Black . . . . . . . . . . . . .Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Beige . . . . . . . . . . . . .Beige . . . . . . . . . . . . .Beige . . . . . . . . . . . . .Beige . . . . . . . . . . . . .Beige . . . . . . . . . . . . .Beige . . . . . . . . . . . . .Beige . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .White . . . . . . . . . . . . .White . . . . . . . . . . . . .White . . . . . . . . . . . . .White . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Roll Lengthc, yds. (m): . . . . . . . . . . . . . . . . . .50 (45.7) . . . . . . . . . . .50 (45.7) . . . . . . . . . . .50 (45.7) . . . . . . . . . .50 (45.7) . . . . . . . . . . .50 (45.7) . . . . . . . . . . .50 (45.7) . . . . . . . . . .50 (45.7) . . . . . . . .Fabricated Forms . . . . . . . . . . . . . . . . . . . . .Cut . . . . . . . . . . . . . . .Cut . . . . . . . . . . . . . . .Cut . . . . . . . . . . . . . . .Cut . . . . . . . . . . . . . . .Cut . . . . . . . . . . . . . . .Cut . . . . . . . . . . . . . . .Cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pieces . . . . . . . . . . . .Pieces . . . . . . . . . . . .Pieces . . . . . . . . . . . .Pieces . . . . . . . . . . . .Pieces . . . . . . . . . . . . .Pieces . . . . . . . . . . . .Pieces . . . . . . . . .
Shelf Lifed: . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Year . . . . . . . . . . . . .1 Year . . . . . . . . . . . . .1 Year . . . . . . . . . . . . .1 Year . . . . . . . . . . . . .1 Year . . . . . . . . . . . . .1 Year . . . . . . . . . . . . .1 Year . . . . . . . . . .
a. PP: Polypropylene; PE: Polyethylene
b. White color not available on flame resistant products due to discoloration. All products are available in twenty additional non-standard colors. Minimum quantities and lead times are listed on the pricepage.
c. Under packaging conditions 70ºF (21ºC) and 50% R.H.
d. One year from date of receipt by customer, when stored in original packaging at 70ºF (21ºC), 50% R.H.
Tag Wire
P/N TW-12
Plastic Putty Knives
P/N PPK - 1 9/16P/N PPK - 3
MISC. SUPPLIES
579Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Plastic Painters Pails
Clear graduated quart pails
P/N PPP-QT
Safety Labeled Wash Bottles
Permanent, colorful silk - screeded labelsLeakproof bottles include DOT, NFPA codes andsymbols, chemical abstract service numbers,protective equipment symbols and target organinformation markings (16 oz bottles)
P/N WB - ACETONE - 16 ozWB - DISTILLLED - 16 ozWB - 150PROP - 16 ozWB - MEK - 16 ozWB - SOAP - 16 ozWB - TOLUENE - 16 ozWB - UNIVERSAL - 16 ozWB - WATER - 16 oz
Spray Bottles
32oz Plastic trigger pump sprayer withWHIMS label
P/N SB
Plastic Parts Bags
Ziplock with white block
P/N 3 x 44 x 66 x 99 x 12
Cloth Parts Bags
Draw string closure
P/N 345-0406 4 x 6345-0610 6 x 10
Syringes
P/N 10CC20CC30CC60CC
Tongue Depressors
100 per box
P/N 118-412
Packing List Envelopes
P/N CT150CT20
MISC. SUPPLIES
580 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Cotton Tipped Applicator
100 per box
P/N QTIP
Paint Roller
P/N PR-3 3” Roller
Paint Brushes
Excellent inexpensive brush for applying oiladhesive paint, cleaning and dozens of otheruses. Smooth sanded wodden handle.
P/N PB 1/2PB 1PB 1 1/2PB 2PB 3
Artist Paint Brushes
Wood handled camel hair artist brushes aregreat for touch up paint work.144 per box
P/N PBA
Acid Brushes
Rolled tin handled, disposable brush144 per box
P/N AB1
Welders Brush
P/N SB2088 SS STAINLESS STEELSB2088 B BRASSSB2088 N NYLON
Razor Blades
100 single edge blades are precision madeof surgical carbon steel for clean, sharpcutting or scrapping
P/N RB1
Grease GunLincoln grease gun, pistol gripCadmium plated head and enclosed pistonfor heavy duty use
P/N 1133
Utility Knife
Disposable utility knife
P/N UTILITY KNIFE
UK-Blades Replacement Bladespkg of 50
MISC. SUPPLIES
581Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
PVC Tubing
Crystal Clear PVC Tubing.Service Temperature Range+25ºF (-4ºC) to +150ºF (+65ºC)
P/N JFT 53-100 CLEAR TUBINGJFT 64-100JFT 86-100JFT 108-100JFT 128-100
Spiral Wrap
P/N 500001-1 Spiral Wrap 1/4“500002-1 1/2“500004-1 1/4“ FR500005-1 1/2“ FR500023-1 1/8“ Hi Temp500024-1 1/4“ Hi Temp
NOMINAL 0D NOMINAL 1D5/16 ”1/4 “3/8 “5/8 “1/2 “
3/16 ”3/8 “1/2 “1/2 “3/4 “
Sandpaper Wet/Dry
P/N 10797 Sandpaper W/D 80 Grit10796 100 Grit10795 120 Grit10793 180 Grit29047 240 Grit29044 360 Grit29043 400 Grit
Emery Cloth
P/N 10885 Emery Sheets Fine10886 Medium10887 Coarse
Spray Can Trigger Handle
• Eliminate messy, sticky or tired fingers!• Firmly snaps on most spray cans of paints,lubricants, adhesives, & cleaners• Reusable
P/N CAN-GUNCAN-GUN-5PK
Tack Cloth
Tack off the dust before you paint.24 per box
P/N TACK CLOTH
Velcro
193038FR 1“ Hook black with adhesive194380FR 1” Loop black with adhesive158084FR 1” Hook black with no adhesive158085FR 1” Loop black with no adhesive158081FR 2” Hook black no adhesive183517FR 2” Loop black no adhesive
582 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
POLISHES / CLEANERS
ZEP 40Non Streaking Cleaner
DESCRIPTIONA heavy-duty, aerosol glass cleaner for non-conductive surfaces. Fortified formula contains powerful solvents, wetting agents, andammonia to handle difficult cleaning tasks.
FEATURES BENEFITS• Heavy Duty • Rapidly removes dirt, film, fingerprints, tobacco smoke, grease and a
variety of other oily and water-soluble soils.• Versatile • Cleans any surface not harmed by water.• Easy to use Handy aerosol package eliminates pre-mixing and special sprayers. Just
simply spray on and wipe dirt and grease away.• All-temperature • Designed especially to eliminate low-temperature streaking problems on
glass during the winter months.• Ecologically more desirable • Contains no phosphates or fluorocarbon repellants.• U.S.D.A. authorized • Authorized for use on all surfaces in inedible product processing areas,
non-processing areas, and/or exterior areas.
Note: Not recommened for tinted windows and Plexi-glas.
Acrylic Window Polish and Sealant
Not just any polish is good enough to carry our name! A superior no-wax, non-yellowing formula containing polyethylene polymers. Thissuperior product not only gives a super slick surface to your windshield and windows, but can also be used on your entire aircraft,including all the painted gloss surfaces, aluminum and fiberglass. Ease of application and removal is unmatched. Sold in 16 oz. singlebottles and in cases of 12.
PART NO. DESCRIPTIONPL16 16 oz. squeeze bottle
210 Window CleanerCleaner and Polish
For those who prefer a windshield and plastic cleaner in an aerosol spray.
PART NO. DESCRIPTION210A 14 oz. spray can
Prist® Acrylic, Plastic and Glass Cleaner
Formulated specifically for aviation - and for all types of windscreens.Prist® Acrylic, Plastic and Glass Cleaner works safely and easily on all acrylic, stretched acrylic, polycarbonate, glass and coated glass aircraft windscreens.And it works inside and outside the aircraft, and on metal and vinyl, without harming painted surfaces.
PART NO. DESCRIPTIONPGC-13 13 oz. sprayPGC-5 5 gal. pail
583Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
POLISHES / CLEANERS
Final Inspection(No. 34)
A revolutionary, multi-purpose mist and spray product that’s a convenient alternative to conventional washing. It’s portable, use it for spotwashing to remove dirt and bugs quickly without scratching. Create a dazzling, deep gloss finish anywhere, anytime. Biodegradable.
P/N M3416 16 oz.
Plastic Cleaner(No. 17)
Safely removes fine “hairline” scratches and grime from clear plastic windowsand windshields, acrylic and polycarbonate surfaces. Follow with anapplication of Plastic Polish (No. 10) to restore perfect clarity.
P/N M1708 8 oz.
Plastic Polish(No. 10)
Safely restores and maintains optic clarity to clear all plastics. This completeone-step product keeps new and like-new transparent plastics in perfectcondition with static-free coating that repels dust. Meets Military Spec MIL-C-5547 and MIL-C-18767A (ASG).
P/N M1008 8 oz.
Plastic Cleaner/Polish(No. 18)
A spray to make maintenance of clear plastics even easier. Just spray and wipe dry to safely remove surface contaminants and to restoreoptic clarity.
P/N M1808 8 oz.
Nevr-DullPolish
Chemically impregnated cotton wadding. Acts as a solvent and a mechanical cleaner. Removes corrosion, carbon exhaust marks, grit,wax, tar, rain marks and any petroleum products. One operation - no severe rubbing, no waxing necessary. Leaves a protective film on allmetal surfaces.
PART NO. DESCRIPTIONNever-Dull 32 oz. can
MET-ALL
An aluminum polish which removes and prevents pitting. Cleans, polishes, protects. Non-toxic, non-abrasive,non-flammable. Easy to use: apply and wipe or wash off.
PART NO. DESCRIPTIONMET-AL-1LB 1 lbMET-AL-2LB 2 lbs
584 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
POLISHES / CLEANERS
CLEAN FLUSHAdditives for Toilets
• Controls odors • Non-toxic• Non-Staining • Non-corrosive (when used properly)• Non-flammable • Easy to use• Can be sprayed on surrounding surfaces
CFA-002 Antifreeze (gallon bottles)CFF-001 Flushing fluid (gallon bottles)CFF-003 Flushing fluid (pint bottles)CFP-004 Packets (12-6 grams packets)CFP-006 Flushing powder (18 oz. Jar)CFK-007 Sani-Kit
RolitePolish Sealant
P/N RPS-16ozRPS-64oz
RoliteMetal Polish
P/N SUPRA 90 (2 lbs)
RoliteAluminum Polish
P/N AP300 (1 lb)
PBS Aircraft De-IcingBoot Treatment
P/N PBS-BS (32 oz.) SealantPBS-BP (32 oz.) Prep
585Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
POLISHES / CLEANERS
The NuShine II SystemGraded Metal and Paint Polish
NuShine II GradesNuShine II - S Final Finish, Light Oxidation Removal, Polish Upkeep, Paint FinishingNuShine II - A Light Oxidation Removal, Polish Surface Reconditioning, Good ShineNuShine II - C Heavy Oxidation Removal, New Aluminum, Light Corrosion RemovalNuShine II - F7 Heavy Cut, for New or Non-Alcad Aluminum, Heavy Corrosion RemovalNuShine II - G4 “Smart Abrasive” - Quick cut, But Reduces to Fine Finish Similar to “C”* Specialty grades are available beyond those listed - Contact Nuvite for Information
Effect on Aircraft Materials:Nuvite NuShine II conforms to the requirements of
Douglas CSD #1 • Boeing D6-17487 • AMS 1650 • Airbus NTO for safety to bare and clad 2024, 7075, 2524 aluminum, cadmium platedsteel, mild steel, high-strength steel, plexiglass, and paint
Aircraft Polish / Dry Washwith UV Protectant
DESCRIPTIONA multi-purpose product that cleans, removes oxidizing paint and polishes surfaces in one application. Aircraft Polish / Dry Wash wasindependently tested and is safe for use on exterior aircraft surfaces when used as directed. Replaces aircraft wet washing, whichreduces effluent discharge and ground water contamination due to its wipe on, wipe of, dry wash application.
FEATURES BENEFITS• Cleaner-Polish-Leveler • A blend of quality, low odor ingredients quickly dissolves grease, oil and
other soils while leaving a high gloss mirror finish.
• Protects surfaces • Helps protect painted and unpainted exterior surfaces of aircraft from the harmful effects of sun (UV light), air fallout, deicing compounds and other airborne elements. Polished surfaces makes subsequent wet washing easier.
• Reduced customer concerns • Aircraft Polish / Dry Wash is not a Hazardous Air Pollutant (HAP) or Ozone Depleting Compound (ODC). Aircraft Polish / Dry Wash is applied easily and removed quickly, reducing worker fatigue and labor expenses. Product can be used by both hand or machine buffing systems generating little or no dust.
• Versatile • May be used on exerior surfaces which are wet or develop surface moisture. Product can be diluted with water for a spray and wipe application. Contact your Zep Aviation Specialist for proper dilution ratios.
• Aircraft Specifications • Conforms to requirements of Boe D6-17487 Rev. NDouglas CSD#1-Type V Cleaner.
POLISHES / CLEANERS
586 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Zep Formula 50Heavy-Duty Alkaline Cleaner
DESCRIPTIONHeavy-duty, all purpose cleaner and degreaser. Consists of a blend of biodegradable, synthetic detergents, augmented by alkalinebuilders and a water-soluble, grease-dissolving solvent. It contains polyphosphates for water softening and conditioning. It is blue incolour, and has a mild, pleasant fragrance. The outstanding property of this product is its very fast action in different cleaning operationson a wide variety of surfaces. Non-flammable and non-corrosive. Truly a multipurpose cleaner that is equally effective in cleaningwoodwork, chrome, stainless steel, terrazzo, white sidewall tires, floors, walls, hoods, vents, ovens, grills, machinery, light fixtures, andother areas. Used for such diverse cleaning operations as floor cleaning, wax stripping, concrete floor cleaning, steam cleaning, as adegreaser for automobile engines, a white wall tire cleaner, and many other applications. Depending on the application, Zep Formula 50may be diluted with water from 1:1 to 50:1.
Aircraft Cleaner IIAlkaline Aircraft Cleaner
DESCRIPTIONA concentrated, moderately foaming, liquid aircraft cleaner containing alkaline builders, soap, surfacants, water -soluable solvent, andwater.
FEATURES BENEFITS• Aircraft Manufacturer’s Specification • Passes requirements of tests set forth in Douglas CSD #1 and Boeing
D6-17487• Military Specifications • Passes requirements of MIL-C-25769J and MIL-C-87936A Type I.• Concentrated • May be diluted up to 28.41mL per 4L, depending on degree of soil.• Emulsifies Grease and Dirt • Contains powerful emulsifiers to trap and remove grease and dirt.• Free Rinsing • Rinses from surface freely and leaves no residue.• Effective in Hard Water • Equally effective in both hard and soft waters.• No Flash Point • Eliminates storage and handling problems.• Has Been Tested on Aircraft Paint • Will not affect painted aircraft surfaces when used as directed.• Non-Crazing of Acrylics • May be used on sheet acrylic, stretched modified acrylic and sheet
polycarbonate in aircraft windows.
FIRST AID KIT/GLOVES
587Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
First Aid KitP/N 50438A (1-7 person)P/N 50434B (7-15 person)P/N 51298B Type B Pouch Style
Sick SacksLight bag for airsickness.White in colour.P/N SICK SACKS
Barrier CreamPrevents dirt from bonding with your skin. Itdissolves only with water, thus removing allclinging dirt. Protects the skin when working withoil, grease, paint, lacquer, tar, adhesives, resins,fiberglass, polyester paste, silicone paste, etc.P/N PR88 QT
ti-NITRILE Disposable Gloves• Light blue colour• Beaded cuffs for added strength and easier donning• Powder free• Protein free (tested for LEAP Assay and LOWRY Assay)• Patented Polymer coating• Textured glove surface for better grip• Bio-compatible (NAMSA test for primary skin irritationand delayed contact sensitisation - no irritation at all)
Part No.SGN-SSGN-MSGN-LSGN-XL
Size S M L XL
Palm width (mm) ± 2 85 95 105 115
Palm thickness (mm) ± 0.02 0.12 0.12 0.12 0.12
Cuff thickness (mm) ± 0.02 0.10 0.10 0.10 0.10
100 gloves per dispenser box
Touch N TuffPremium Quality 100% Thin Mil NitrileTouch N Tuff disposable gloves set a whole newstandard in comfort, durability, dexterity, andcleanliness. Made of 100% nitrile, the glovescontain absolutely no fillers, silicones orplasticizers. And, although they are only 4 milsthick, Touch N Tuff gloves provide three times thepuncture resistance of competitive latex or vinylgloves. 9.5 inches in length, they are availablepowdered or powder-free.
Part No. Description Size95-500 Lightly powdered, 6.7-7,
100 gloves/dispenser, 7.5-8,10 dispensers/case 8.5-9
9.5-1092-600 Powder-free, 6.5-7,
100 gloves/dispenser, 7.5-8,10 dispensers/case 8.5-9
9.5-10
5-Mil, 100% Natural Rubber LatexConform gloves provide the highest degree of dexterityavailable with the strength and comfort of 100% naturalrubber latex. Available with powder and powder-free.
Part No. Description Size69-210 White, powdered S, M, L, XL
69-318 White, powder-free S, M, L, XL
Packaging:100 gloves/dispenser10 dispensers/case
GLOVES
588 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
Orange HeavyweightUnsupported, Extra-Heavy-Duty, Cotton Flock-Lined, Natural Rubber LatexWith a 29 mil palm thickness that is 50% greaterthan most standard flock-lined gloves, OrangeHeavyweight gloves provide added protectionagainst chemical and physical hazards due totheir increased puncture/cut resistance and tensilestrength. In addition, the 100% cotton flock liningincreases user comfort.
Part No. Description Size208 Orange, diamond- 7, 8, 9, 10
embossed,flock-lined29 mil, 13”
OmniUnsupported, Medium-Duty, Cotton Flock-Lined, Neoprene/Natural Rubber Latex BlendMade from a unique 20-mil-thick neoprene andnatural rubber latex blend, Omni gloves provideexcellent chemical, snag, puncture, abrasion, andcut resistance. Pebble embossing provides addedgrip on wet or dry surfaces, while the 100% cottonflock lining offers increased user comfort. Plus,Omnis competitive price make them aneconomical alternative to higher-priced neopreneand nitrile gloves in medium duty applications.
Part No. Description Size278 Green, pebble- 7, 8, 9, 10
embossed,flock-lined20 mil, 12”
Sol-VexUnsupported, Premium-Quality, NitrileSol-Vex gloves are made of a high-performancenitrile compound which provides an outstandingcombination of strength and chemical resistance.When exposed to aromatic and petroleumsolvents, as well as caustics and animal fats, Sol-Vex gloves have proven to be a superior choiceover rubber or neoprene. Sol-Vex gloves won’tswell, weaken, or degrade, and they offer betterprotection against snags, punctures, abrasionsand cuts. And, as added benefits, Sol-Vex glovesdo not promote contact dermatitis.
Part No. Description37-145-10 Embossed, 11 mil, 13”
Inspector’s GlovesP/N 004-01815Men’s white lisle inspector’s glove
PVC-Coated Cotton Gloveswith Welded PVC-CoatedSleevesP/N 013-13045Green double dip gauntlet with shoulder lengthsleeves joined with elastic strap treated withActifresh.
Good Quality Split Leather PalmRiggers GlovesP/N 015-02521Men’s split leather palm/striped cotton back/starchedcuff/riggers glove.
Heat Resistant GlovesFeatures: Good abrasion properties;Heat resistant.
Cotton Work GlovesP/N 004-01108Men’s 8 oz. cotton/knitwrist
P/N 10106
589Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
HEARING PROTECTION
E•A•R™ Classic Foam Earplugs• Uncorded in pillow pack P/N 301-1001• Corded in poly bag P/N 311-1101
E•A•R™ Caboflex Semi-Aural Hearing Protector• Silicone pds contain Classic™ earplugs for reliable, comfortable fit• Conically shaped pods swivel for easy alignment and entry into ear• Easily insertable, no roll down required• Worn under chin; will not interfere with hard hat or glasses• High visibility band and pods for easy compliance checks• Band can be placed around neck preventing loss; ideal for intermittent use• Yellow E•A•R trademark colour assures proven protection and high quality• Lightweight dielectric plastic construction• Laboratory tested NRR 20• Take apart assembly for easy cleaning
• CABOFLEX P/N 320-2001• E•A•R Caps P/N 321-2101
Peltor H10 MuffFor extremely demanding noise exposures.A brand new technology of hearing protector, with dual cup shells minimizes cup resonances and provides optimum attenuation at higherfrequencies and increases speech and signal intelligibility. The inside cavity and the cavity between the two shells are acoustically matchedfor optimum low frequency attenuation. Comfortable wide cushions filled with a soft foam material for outstanding fit and reduced contactforce. An acoustically controlled super-attenuator providing effective protection and superior comfort.
Twin Cup -HeadbandP/N H10AWeight: 265 gStandardConfiguration
Twin Cup - NeckbandP/N H10BFor independent usewith or without hardhat. Accurate andcomfortable fit againstthe head. Equippedwith adjustable velcrostrap.
Weight: 250 g
590 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
RESPIRATORS/SAFETY GLASSES
3M 8210 N95 Particulate RespiratorP/N 8210The 3M 8210 N95 Particulate Respirator is designed to help providequality, reliable worker protection against certain non-oil based particles.The 8210 offers a number of benefits to you and your workers.
Half Facepiece Respirators 5000 SeriesPre-Assembled for Convenience. Designed for Comfort.3M Respirators 5000 Series are pre-assembled, have no spare parts and require no maintenance. They offercomfort, convenience and performance.
Features/Benefits• Available in 3 sizes (small, medium, large) to comfortably fit many faces.• Resealable storage bag helps keep respirator clean between uses.• Low profile design provides wider field of vision and greater comfort while wearing goggles or glasses.• Lightweight design coupled with cradle suspension helps relieve pressure on back of neck and bridge of nose.
3M 5000 Series Respirators
Part No. NIOSH Approval5101 (small) Certain organic vapours5201 (medium)5301 (large)
P/N 51P71
P/N 5301
P/N 8210
Safety GogglesP/N SG305
Safety GlassesP/N SG CLEAR P/N SG MIRRORED
SAFETY GLASSES
591Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
KIMBERLY CLARKWYPALL® X80 TOWELS
Engineered to perform better than rags and rental shop towels, WypAll® X80 Towelsfeature our patented HYDROKNIT® Fast-Absorbing Material.• Absorbs more oil and water faster pound for pound than landered shop towels• No holes, strings, metal chips or residues (unlike rental shop towels)• Maintains strength in solvents• Maintains strength in solvents• Consistent size, shape and freshness• Reliable product count on package vs. rags by the pound
Task• Heavy-duty machine & part wiping• Wiping metal shavings• Prepping surfaces with solvents• Cleaning rough surfaces
Part No. Packaging Material Size W” X L” Put-Up Dispenser
41048 Pop-Up® Box HYDROKNIT® 9.1” x 16.8” 5/80 73900739007390041041 Brag® Box HYDROKNIT® 12.5 x 16.8” 1/160
41044 Brag® Box HYDROKNIT® 12.5 x 16.8” 1/160
41026 1/4 fold HYDROKNIT® 12.5 x 14.4” 4/50 0910709107
41029 1/4 fold HYDROKNIT® 12.5 x 14.4” 4/50
41025 Jumbo Roll HYDROKNIT® 12.5 x 13.4” 1/47580595, 80579
41055 Jumbo Roll HYDROKNIT® 12.5 x 13.4” 1/475
41043 Jumbo Roll HYDROKNIT® 12.5 x 13.4” 1/475
KIMBERLY CLARK
592 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
WYPALL® L20 AND L10 WIPERS
WypAll® L20 Kimtowels® Wipers• Textured for extra cleaning power• No binders or glues• Multi-ply capacity for large spills
WypAll® L10 Utility Wipes• Strength and durability for general clean-up tasks
WypAll® L10 Windshield Towels• Texture enhances cleaning performance
WypAll® L10 Dairy Towels• Soft, strong, outstanding absorbency
Task• Single-use parts & tool clean-ups• Mining operations maintenance• Hydraulic leak soakers and wiping• General purpose field utility wiping• Conveyor and roller cleaning• Retail store maintenance & cleaning
Task• Spray and wipe jobs• Glass surface cleaning• Absorb small liquid spills• Detail and final assembly wiping
Part No. Packaging Material Size W” XL” Put-Up Dispenser
47026 Pop-Up® Box multi-ply paper 9.1” x 16.8” 10/100 73900
47033 Pop-Up® Box multi-ply paper 9.1” x 16.8” 10/88 73900
47044 Pop-Up® Box 4-ply paper 9.1” x 16.8” 10/88 73900
34607 Brag® Box 4-ply paper 12.5” x 16.8” 1/176 73900
58399 Brag® Box multi-ply paper 12.5” x 16.8” 1/176 73900
47000 1/4 fold multi-ply paper 12.5” x 14.4” 12/68 09107
47011 1/4 fold multi-ply paper 12.5” x 14.4” 12/68 09107
47022 1/4 fold 4-ply paper 12.5” x 14.4” 12/68 09107
47758 Center Pull Roll 2-ply paper 9.8” x 13.4” 3.550 09335
Part No. Packaging Material Size W” XL” Put-Up Dispenser
05320 Pop-Up ® Box Utility Wipes 1 ply paper 9.0” x 10.5” 18/125 73900
05322 Pop-Up ® Box Utility Wipes 1 ply paper 12.0” x 10.5” 18/125 09352
05120 Banded Windshield Towels 2 ply paper 9.3” x 10.5” 16/140 N/A
05123 Banded Windshield Towels 1 ply paper 9.1” x 10.25” 10/224 N/A
01770 Banded Dairy Towels 1 ply paper 9.3” x 10.5” 12/200 N/A
01772 Pop-Up® Box Dairy Towels 1 ply paper 9.0” x 10.5” 18/110 09352
L20
L10
WypAll® L20 WypAll® L10
593Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
KIMBERLY CLARKKIMTECH SCIENCE* WIPERS
The industry standard for labs and researchKimtech Science* Kimwipes are versatile option for delicate tasks such as laboratory cleaning,surface/parts cleaning, instrument cleaning and lens cleaning.
• Absorbent; easily wipes up liquids and dust• 100% virgin fiber• Low lint and low extractables• LintGuard® Anti-stat Polyshield helps further reducestatic buildup and lint
Part No. Packaging Material Size W” XL” Put-Up
34120 Kimtech Science* Kimwipes® EX-L Delicate Task Wiper 1 ply tissue 4.4” x 8.4” 30/280
34155 Kimtech Science* Kimwipes® EX-L Delicate Task Wiper 1 ply tissue 4.4” x 8.4” 60/280
34133 Kimtech Science* Kimwipes® EX-L Delicate Task Wiper 1 ply tissue 12” x 12” 15/196
34256 Kimtech Science* Kimwipes® EX-L Delicate Task Wiper 1 ply tissue 14.7” x 16.6” 15/140
34705 Kimtech Science* Kaydry® EX-L Delicate Task Wiper 2 ply tissue 11.8” x 11.8” 15/119
34721 Kimtech Science* Kaydry® EX-L Delicate Task Wiper 2 ply tissue 14.7” x 16.6” 15/90
34743 Kimtech Science* Kaydry® EX-L Delicate Task Wiper 3 ply tissue 12” x 12” 15/119
KIMBERLY CLARK
594 To order, call us toll-free: 877-814-2376, or 905-405-9355 (local calls).
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
WYPALL® X70 MANUFACTURED RAGS
Part No. Packaging Material Size W” X L” Put-Up Dispenser
41412 Pop-Up® Box HYDROKNIT® 9.1” x 16.8” 10/100 73900
41455 Pop-Up® Box HYDROKNIT® 9.1” x 16.8” 10/100 73900
41300 Brag® Box HYDROKNIT® 12.5” x 16.8” 1/152 73900
41200 1/4 fold HYDROKNIT® 12.5” x 14.4” 12/76 09107
41061 Flat Sheet HYDROKNIT® 16.6” x 29.8” 1/300 N/A
41100 Flat Sheet HYDROKNIT® 14.8” x 16.6” 1/300 N/A
41702 Center pull Roll HYDROKNIT® 9.8” x 13.4” 3/275 09335
41600 Jumbo Roll HYDROKNIT® 12.5” x 13.4” 1/870 80595, 80579
41611 Jumbo Roll HYDROKNIT® 12.5” x 13.4” 1/870 80595, 80579
WYPALL® X60 & X50 WIPERSWypAll® X60 Wipers bring the absorbing power of our HYDROKNIT® technology to a lighter-weight wiper.Designed to outperform rags, WypAll® X60 Wipers raise the standard for general purpose wipers.
• No adhesives or binders; leaves no residue• Reinforced for extra scrubbing and cleaning power• Tough enough for big jobs - soft enough for face and hands.
Task• Applying thinners & solvents• Cable lubricant removal• Adhesive cleaning• Removing grease & soil in tight areas
WypAll® X70 Manufactured Rags have what it takes to tackle those heavy-duty industrial jobs usually handled by cloth rags.Count on WypAll® X70 Wipers for long lasting performance that extends usage and reduces waste.
• Pound for pound absorbs more oil and water than rags• Cleans oil, grime and solvent with one wipe• Versatile, economical alternative to scrap rags and shop towels
Task• Cleaning surfaces & tools• Heavy maintenance wiping
595Fax your orders to: 905-405-9031 • Visit our website: www.aerosuppliesinc.com
Documents in the book are for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
KIMBERLY CLARKWYPALL® X60 & X50 WIPERS
Part No. Packaging Material Size W” X L” Put-Up Dispenser
34015 Brag® Box HYDROKNIT® 12.5” x 16.8” 1/180 73900
34790 Pop-Up® Box HYDROKNIT® 9.1” x 16.8” 10/126 73900
34865 1/4 fold HYDROKNIT® 12.5” x 14.4” 12/76 09107
34770· 1/4 fold HYDROKNIT® 11” x 23” 9/100 09107
34900 Flat Sheet HYDROKNIT® 12.5” x 16.8” 6/150 N/A
35401 Small Roll HYDROKNIT® 9.9” x 13.4” 12/130 73100
35411 Small Roll HYDROKNIT® 9.9” x 13.4” 12/130 73100
35421 Small Roll HYDROKNIT® 19.8” x 13.4” 6/130 73100
35431· Small Roll HYDROKNIT® 19.8” x 13.4” 6/130 73100
34955 Jumbo Roll HYDROKNIT® 12.5” x 13.4” 1/1100 80595, 80579
34965 Jumbo Roll HYDROKNIT® 12.5” x 13.4” 1/1100 80595, 80579
35015· Jumbo Roll HYDROKNIT® 9.8” x 13.4” 1/1100 80595, 80579
DUPONT SONTARA AC™ AIRCRAFT WIPESTough DuPont Sontara AC aircraft wipes are the smart choice for both aircraft manufacturing and maintenance. Their strengthand low-linting characteristics make them ideal for a wide variety of flight-critical jobs. They leave no rag marks when used inpre-painted applications -- and they’re ideal for cleaning windshields and polishing bright work (chrome, high-polish aluminum,etc.). Plus Sontara AC wipes can handle tough cleaning agents without falling apart.
Part No. Color Packaging Wiper Size Wipes/Ind. Pkg. Total Count
AC9165 White Pop-Up 9” x 16.5” 100/carton 800 (8 cartons per case)
AC12165 White Pop-Up 12” x 16.5” 125/side 250
Aerospace Wiping ClothRIMPLE CLOTH is manufactured from 100% cotton purified cotton fibers and contains no silicone.It is a 3 ply cloth which is widely used in the aerospace industry. Its cotton fibers are of high qualityand low-linting and non-abrasive. Rimple Cloth is one of the most durable products available forcleaning and polishing and is strong enough to withstand industrial wiping and polishing with avariety of cleaning solvents. The unique crimped finish gives Rimple Cloth more surface area forcollecting and trapping dirt particles. In addition, the cloth’s super soft texture and stretchableconstruction give it excellent surface conformity and memory. Its firmly twisted yarns and openweave also help eliminate foreign particles on the surface of the cloth by absorbing these particlesinto the open cell construction. It is one of the most durable products available for cleaning andpolishing. AFF’s controlled and unique purification process produces a very absorbent wiper that iscompatible with cleaning solvents.
• Meets or exceeds AMS 3819B• Meets or exceeds BMS 15-5F
P/N RIMPLE CLOTH
RIMPLE CLOTH RAGS
CV102
CL107
Part No. Description Rags
CV102 Coloured rags 25 lbs/pkg
CL107 Lint-free rags 25 lbs/pkg