aeroquip hose
TRANSCRIPT
-
7/27/2019 Aeroquip Hose
1/47
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
Hose Index
Alphabetical Index
Part Number Index
DESCRIPTION PAGES DESCRIPTION PAGES DESCRIPTION PAGES DESCRIPTION PAGES
PART # PG. PART # PG. PART # PG. PART # PG. PART # PG. PART # PG. PART # PG. PART # PG.
A/C and Refrigeration Hose 17
AQP Hose 13-14
Hose 20-57
Hydraulic 34-57
AQP 35, 36, 39, 40,41, 45, 48, 49, 50, 51
AQP/HI-IMPULSE 39, 40, 48, 49
AQP/Hi-Pac 41
BRUISER 43, 44, 46, 53, 54, 56
Double wire braid 42-49
Four spiral wire 49-53
Four or six spiral wire 54-56
HI-IMPULSE 38-40, 47-49
Hi-Pac 41
MatchMate BLUE 39, 48
MatchMate ICE 45
MatchMate Plus 39, 47, 48, 51
Single wire braid 38-42
Textile braid 21, 22, 32-37
Wire inserted suction 34, 35
Special application 20-34
Airbrake 21-23
AQP 23-25, 27, 33
Convoluted PTFE 31, 32
Engine and airbrake 23
EPDM 40, 49
Fuel and oil 23-27
J ack Hose 57
LPG 27, 28
Power steering 41
Railroad airbrake 22
Silicone rubber (coolant) 20
Silicone rubber (heater) 20
SOCKETLESS 32-34
PTFE 28-32
Textile braid low pressure32-34, 35-37
How to order 12
PTFE Hose 18-19
Thermoplastic Hose 15-16
Eatons Aeroquip Hoseand Fitting AssemblyProduct Warning
Flexible hose lines offermany advantages over rigidtubing including routingease, vibration absorption,sound deafening and theability to accommodatemovement of connectedcomponents. However,hose lines require cautionin use not only to providelong service, but also toguard against potentiallydangerous failure.
Important
The user should carefullyobserve the precautionslisted in this catalog,including the recommenda-tions on the selection ofhose and fittings on the rel-evant pages, and the pageson fluid compatibility. Inaddition, care should betaken not to exceed theminimum bend radius listedfor each hose size and typein the hose section.
M aximum operating pres-sure should not exceedpressures listed in the hosedata. Instructions forassembling fittings to differ-ent hose should be fol-
lowed carefully to ensurethe performance of thecompleted assembly.
WARNING Eatonfitting tolerances
are engineered to matchEatons Aeroquip hosetolerances. The use ofEaton fittings on hosesupplied by other manufac-turers and/or the use ofEatons Aeroquip hose withfittings supplied by other
manufactures may result inthe production of unreliableand unsafe hose assem-blies and is neither recom-mended nor authorized byEaton C orporation or any ofits affiliates or subsidiaries.
WARNINGApplication considera-
tions must be observed inselecting appropriate com-ponents for the applicationof these products con-
tained herein. The failure tofollow the recommenda-tions set forth in this cata-log may result in an unsta-ble application which mayresult in serious personalinjury or property damage.
E ATON COR P O R ATION O RAN Y O F ITS AFFILIATESO R SUBSIDIAR IES SHALLNO T BE SUBJECT TO ANDDISCLAIM S ANY O BL IGA-TIO NS OR L IABIL IT IES
( INCLUDING BUT NO TL IM ITED TO ALL CO NSE-Q UENTIAL, INC IDENT IALAN D CON T IN G EN T D AM -AGES) AR IS ING FRO MTORT CLA IM S (INCLUDINGWITHOUT L IM ITAT IO NNEGLIGENCE AND STR ICTL IABIL ITY) O R O THER THE-O RIES O F LAW WITHRESPECT TO ANY HO SEASSEM BL IES NOT PRO -
D U CED FR OM G E N U IN EAEROQ UIP HO SE FIT-T INGS, HO SE AND A ERO-Q U IP APPROVED EQ U IP-M E NT, AN D IN CO N FO R -M ANCE WITH EATO N S
AEROQ UIP PROCESS ANDPRODUCT INSTRUCT IONSFO R EACH SPECIFIC HO SEASSEM BLY.
Failure to follow theseprocesses and productinstructions and limitationscould lead to prematurehose assembly failuresresulting in property dam-age, serious injury or death.
Routing
If the user follows the rec-ommendations on hose linerouting and installation asprovide herein, improvedsafety and longer servicelife of any hose installationwill result.
302A 26303 261503 261531 221531A 222550 212554 212556 342565 342570 21
2575 322580 372583 372651 252661 352681 382766 452781 472807 282808 30
CR170 28FC194 40FC195 49FC234 25FC252 20FC254 53FC273 54FC273B 54FC300 27FC310 41
FC321 27FC323 50FC324 50FC325 51FC332 33FC350 23FC352 20FC355 23FC363 31FC364 31
FC465 29FC466 35FC469 30FC498 36FC510 41FC563 32FC579 57FC598 36FC606 56FC606B 56
FC611 40FC619 34FC629 21FC636 49FC639 42FC647 33FC650 24FC659 52FC693 46FC699 24
FC735 46FC736 53FC829 22FC839B 43FC849 43FC849B 44FC854 53GH120 45GH194 39GH195 48
GH466 55GH493 51GH506 55GH663 39GH681 42GH781 47GH793 48S-TW 29
-
7/27/2019 Aeroquip Hose
2/47
12 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
Accurate processing and
prompt delivery of your
order depends on easy
identification of your
requirements. Please
order Aeroquip brand parts
using correct part numbers
as described in this catalog.
Inquiries and orders should
be directed to your
Aeroquip D istributor or:
Eaton Corporation14615 Lone O ak R oad
Eden Prairie, M N 55344U SA
952/937-9800;
Fax: 952/974-7722
www.hydraulics.eaton.com
Part numbers anddash sizes
D ash size designates the
nominal size in 16ths of an
inch. This number imm edi-
ately follows the part num-
ber and is separated from it
with a dash.
Dimensions
D imensions given in this
catalog for Aeroquip prod-
ucts are approximate and
should be used for refer-
ence only. Exact dimension-
al information for a given
product is subject to change
and varying tolerances; con-
tact Eaton directly for full
current information.
WARNING
Hose assemblies
Eaton manufactures the
terminal ends of our hose
fittings to the appropriate
requirements established
by the SA E. Therefore, the
performance ratings of
these hose fittings meet
the SAE requirements. I t is
possible to order a hose
assembly with a fitting ter-
minal end that has a per-
formance rating lower than
the hose rating. When
ordering hose assemblies,
please keep the connecting
end performance rating in
mind since this may affect
overall hose assembly per-
formance.
Hose assembly compo-
nents (hose and fittings)
are easily assembled in the
field. H owever, factory
assembled reusable and
crim ped hose assemblies
are available.
For complete information,
contact Eaton.
Cut length hose
Cut lengths of hose should be ordered as shown below by
specifying lengths in inches.
For num eric part num bers: 2651- 10- 00484
H ose type
H ose size (in 16ths of an inch)
Cut length (in inches)
last digit is in 1/8ths of an inch 00484 = 481/2 inches
For alpha-numeric part numbers: FC300- 08- 00484
H ose type
H ose dash sizeCut length (in inches)
last digit is in 1/8ths of an inch 00484 = 481/2 inches
Bulk hose
Bulk hose should be ordered by specifying length in feet as
shown below.
Complete number 500 ft.- 2651- 10
Q uantity (in feet)
H ose type
H ose size (in 16ths of an inch)
N ote: Length tolerance for hose, assemblies and sleeves is:
U p to and including 12 inches: 1/8"
A bove 12 inches to and including 18 inches: 3/16"
A bove 18 inches to and including 36 inches: 1/4"
A bove 36 inches: 1% of length
How to Order
-
7/27/2019 Aeroquip Hose
3/47
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
The superior high-tempera-ture, abrasion-resistant
hose. Features extensive
fluid compatibility.
See page 27.
Combines superior high-
temperature resistance and
extensive fluid compatibility
plus operating pressures up
to 40% greater than
SA E100R1 hose.
Aeroquip brand
HI -IM PU LSE hose
construction is a patented
process. Patent number
3,725,167.
See page 40.
Combines superior high
temperature resistance and
extensive fluid compatibility
plus operating pressures up
to 40% greater than
SA E100R2 hose.
Aeroquip brand
HI -IM PU LSE hose
construction is a patented
process. Patent number
3,725,167.
See page 49.
Combines the flexibility
and economy of H i-Pac
hose with the temperature
and fluid compatibility of
AQ P hose.
Aeroquip brand Hi-Pac hose
construction is patented.
Patent number 3,463,197.
See page 41.
U niform Pressure
Spiral W ire
Hose 210,0 BA R [3000 psi]
The features of AQ P
construction and spiral
wire reinforcement are
combined in this quality
hose style.
See page 50.
U niform Pressure
Spiral W ire H ose
280,0 BA R [4000 psi]
Features the patented AQ P
tube compound and 4-spiral
wire reinforcement. U ses
the same fittings as FC323.
See page 50.
U niform Pressure
Spiral W ire H ose
350,0 BA R [5000 psi]
Features the patented
AQ P tube compound and
4-spiral wire reinforcement.
Pressures to 350,0 BA R
[5000 psi].
See page 51.
FC30 0 AQP Hose
FC194 AQP/HI-IMPULSE Hose
FC195 AQP/HI-IMPULSE Hose
FC510 A QP/Hi-Pac Hose
FC32 3 AQP Hose
FC32 4 AQP Hose
FC32 5 AQP Hose
Exceeds SAE100R5
Exceeds SAE100R1A, EN853 1ST, ISO1436-1 TYPE 1ST
Exceeds SAE100R2A, EN853 2ST, ISO1436-1 TYPE 2ST
Exceeds SAE100R2 Performance Requirements
AQP Hose
Refer to AQ P Catalog A-HO AQ -M C001-E1 for more information on AQ P hose.
-
7/27/2019 Aeroquip Hose
4/47
14 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
The revolutionary truck
hose with superior abrasion
resistance. Features an
AQ P tube for excellent fluid
compatibility and tempera-
ture requirements.
See page 23.
Ideal for truck maintenance
and piping conditions
where fluid compatibility
and chemical resistance are
required.
Has a blue AQ P elastomer
cover for fluid resistance.
See page 23.
Fire resistant fuel hose
meets USCG AI
requirements. O ffers
positive fire resistance in
critical applications without
using a firesleeve.
See page 25.
O ffers extended fluid compat-
ibility and operating tempera-
ture range for low pressure
applications.
Used with Aeroquip brand
SO CK ETLESS fittings for
quick and easy assembly.
See page 33.
For low pressure
applications.
See page 36.
A thin cover, 1-wire version
of AQ P/HI -IM PU LSE hose
that allows the use of
Aeroquip M atchM ate
Plus Thru-The-Cover (T TC)
fittings.
Pressures to 227,0 BA R
[3250 psi].
See page 39.
The dual-purpose hose
with extensive fluid com-
patibility is ideal for either
suction or chemical transfer
applications.
See page 35.
A thin cover, 2-wi re version
of AQ P/HI -IM PU LSE hose
that allows the use of
Aeroquip M atchM ate PlusThru-The-Cover (TTC)
fittings.
Pressures to 397,0 BA R
[5750 psi].
See page 48.
The revolutionary truck
hose with superior abrasion
resistance. Features an
AQ P tube for excellent fluid
compatibility and tempera-
ture requirements.
Pressure to 70,0 BA R
[1000 psi].
See page 24.
FC35 0 AQP Hose
FC35 5 AQP Hose
FC23 4 AQP Hose
FC332 AQP SOCKETLESS Hose
FC49 8 AQP Hose
GH194 M atchMat e BLUE AQP/HI-IM PULSE Hose
2661 AQP Hose
GH195 M atchMat e BLUE AQP/HI-IM PULSE Hose
FC65 0 AQP Hose
Exceeds FMVSS-106 Type All
Exceeds FMVSS-106 Type All
Exceeds SAE100R6
Exceeds SAE 100R1AT
Exceeds SAE100R4
Exceeds SAE 100R2AT
High Temperature Fuel and Oil
-
7/27/2019 Aeroquip Hose
5/47
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
Low volumetric expansion
Rugged design
O perating temperature
range of -40C to + 100C [-
40F to 212F].
Long continuous lengths
Low elongation
Best value 100R7 hose
O perating temperature
range of -40C to + 100C
[-40F to 212F].
SA E J517 non-conductive
hose construction Less than 50 micro-
amperes leakage when
subjected to 75,000
volts/ft for 5 minutes
Flexible in low temperatures
Abrasion/U V resistantcover
O perating temperature
range of -54C to + 100C
[-65F to 212F].
Single permanent fitting
series fits all sizes
SA E 100R7 dimensions
Cut resistant heavy
duty design
Crush resistant
O perating temperature
range of -40C to + 107C
[-45F to 225F].
H ighly flexible, even in
cold tem peratures
Small O .D.
Lightweight, yet rugged
construction
O perating temperature
range of -54C to + 94C
[-65F to 200F].
Long life in impulse
cycling and flexing
D esigned for permanent
or reusable fittings
O perating temperature
range of -40C to + 100C
[-40F to 212F].
SA E J517 non-conductive
hose construction.Less than 50 micro-
amperes leakage whensubjected to 75,000 volts/ftfor 5 minutes
Long life for impulse
cycling and flexing
U V resistant cover
D esigned for permanent
and reusable fittings
O perating temperature
range of -40C to + 100C
[-40F to 212F].
37AL Non-Conductive Medium Pressure Hose
SAE100R7 Non-Conductive Requirements, ANSI A92.2 Specs
Synflex Thermoplastic Hose
Refer to Synflex Catalog E-HO O V-M C001-E for m ore information on Thermoplastic hose.
3R30 Low Pressure Hose
SAE100R3 Performance Specifications
313 0 M edium Pressure Hose
SAE100R7 Specifications
SAE100R1 & R7 Performance Specifications
35 80 M edium Pressure Hose
SAE 100R18 Specifications
30CT Constant Pressure Hose
3R80 High Pressure Hose
SAE 100R8 Specifications
3E80 Non-Conductive High Pressure Hose
SAE100R8 Specifications
-
7/27/2019 Aeroquip Hose
6/47
16 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
Compact size
Low elongation
D esigned for permanent
high pressure fittingswith hose guards
Lightweight
O perating temperature
range of -40C to + 66C [-
40F to +150F].
SA E J517 non-conductive
hose construction. Lessthan 50 micro-amperesleakage when subjected to
75,000 volts/ft for 5 minutes
Compact size
Low elongation
U V resistant cover
D esigned for permanent
high pressure fittings
with hose guards
O perating temperature
range of -40C to + 66C [-
40F to +150F].
H igh moisture barrier
core tube
N o plasticizers in the
core tube
U V resistant cover
Custom colors available
O perating temperature
range of -23C to + 66C
[-10F to 150F].
36 30 General Purpose Air and Water Hose
H igher pressures than
3440 M oisture Lok series
H igh moisture barrier
core tube
H igh chemical compatibili-
ty core tube
U V resistant cover
Custom colors available
O perating temperature
range of -40C to + 100C
[-40F to 212F].
34 CU High Pressure Transfer Hose
3V10 Very High Pressure Hose
3V E0 Non-ConductiveVery High Pressure Hose
Standard bold colors:
gray, red, blue, yellow or
black
Excellent abrasion and
impact resistance
Lightweight
4:1 Burst to working
pressure safety factor
Long life over rubber
hose
O perating temperature
range of -23C to + 66C
[-10F to 150F].
3440 Moisture-Lok Hose
KynarCore Tube
Refer to Synflex Catalog E-HO O V-M C001-E for more information on Thermoplastic hose.
-
7/27/2019 Aeroquip Hose
7/47
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
Hose constructed of
polymide veneer tube, with
polyester reinforcement and
chlorobutyl cover.
Temperature range is
-40C to + 135C
[-40F to +275F]. Fitting
selection includes factory
crim p and the E-Z C lip line
of A /C connections.
For more information,
refer to catalog
A-HO AC -M C001-E1.
GH134 M ulti-Refrigerant A/C andRefrigeration Hose
A/C and Refrigeration Hose
Hose constructed of
polymide veneer tube,
with synthetic rubber cover.
D esigned to work with
100R5 reusable fittings.
Temperature range is
-40C to + 121C
[-40F to + 250F].
For more information,
refer to catalog
A-HO AC -M C001-E1.
FC80 2 M ulti-Refrigerant A/C and
Refrigeration Hose
SAE-J 2064, Type E construction.
Flexible hose is constructed
of a corrugated polymide
tube for exceptional flexibili-
ty in large bus applications.
This is a factory crimp prod-
uct. P lease contact Eaton for
additional information to
qualify for field crimp of the
FC555 hose. Temperature
range is -40C to + 125C
[-40F to + 257F].
For more information,
refer to catalog
A-HO AC -M C001-E1.
FC55 5 M ulti-Refrigerant A/C andRefrigeration Hose
Hose constructed of
polymide veneer tube with
polyester reinforcement
and synthetic rubber cover.
The FC505 fitting program
is factory crimp only.
Temperature range is
-40C to + 135C
[-40F to + 275F].
For more information,
refer to catalog
A-HO AC -M C001-E1.
FC50 5 Low Effusion, M ulti-RefrigerantA/C and Refrigeration Hose
Butyl tube and polyester
braid, abraision-resistant
cover. D esigned to work
wi th 100R5 reusable fit-
tings. Temperature range is
40C to + 121C
[-40F to + 250F].
For more information,
refer to catalog
A-HO AC -M C001-E1.
FC55 8 R134a A/C and Refrigeration Hose
Meets SAE J 2064 with 100R5 reusable fittings, sizes 10 to 24.
Meets SAE-J 2064.
Exceeds SAE-J2064, Type E.
Refer to A/C and Refrigeration Catalog A-HO AC -M C001-E1 for more information on A/C and Refrigferation hose.
-
7/27/2019 Aeroquip Hose
8/47
18 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
Everflex S Series tube is
reinforced with 304 stain-
less steel wire. A ll sizes
have a minimum of .040
thick extruded virgin PTFE.
That is 33% more PT FE
than most other manufac-turers offer. The additional
PTFE results in im proved
bend radius, kink resist-
ance and slows permeation
of gases. Temperature
range is -54C to + 230C
[-65F to + 450 F].
For more information, referto catalog E-HO EV-M C001-E.
Smooth Bore S Series Hose
PTFE Hose
Everflex B Series is rein-
forced wi th bronze wire. A ll
sizes have a minimum of
0.040 thick extended vir-
gin PTFE. Everflex B Series
hose has traditionally been
used in high vibration envi-
ronments. Temperature
range is -54C to + 204C
[-65F to + 400F].
For more information, refer
to catalog E-HO EV-M C001-E.
Smooth Bore B Series Hose
Everflex ST W Series tube is
reinforced with 304 stain-
less steel wire. STW hose
is available as an alternative
where competitors thin
wall products are specified
and S Series hose can not
be substituted. Radius in
inches to inside bend.
M ultiply bend radius by 1.25
for dynamic applications.
Temperature range is
-54C to + 230C
[-65F to + 450 F].
For more information, refer
to catalog E-HO EV-M C001-E.
Smooth Bore STW Series Hose
S-3 with a PVC cover is aPTFE hose which can be
used for D O T 571.106
hydraulic brake line applica-
tions. PVC cover is on the
exterior in 0.020 thickness.
The PVC cover is useful to
protect motorcycle paint
jobs or provide durability inan abrasive environment.
Temperature range is -40C
to + 93C [-40F to + 200 F].
For more information, refer
to catalog E-HO EV-M C001-E.
Smooth Bore S-3 Series Hose
SC Series hose is identical
to the S series with oneexception. SC hose has an
internal conductive static
dissipating liner that pro-
vides a path to the hose
end fittings for applications
where flow induced electro-
static charges can occur.
Radius in inches to inside
bend. M ultiply bend radius by1.25 for dynamic applications.
Temperature range is -54C
to + 230 C [-65 F to + 450F].
For more information, refer
to catalog E-HO EV-M C001-E.
Smooth Bore SC Series Hose
Refer to Everflex Catalog E-HO EV-M C001-E for more information on PTFE hose.
-
7/27/2019 Aeroquip Hose
9/47
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SCTW Series hose is identi-
cal to the STW Series with
one exception. SCTW hose
has an internal conductive
static dissipating liner that
provides a path to the hose
end fittings for applications
where flow induced electro-
static charges can occur.
Radius in inches to inside
bend. M ultiply bend radius by
1.25 for dynamic applications.
Temperature range is -54C
to + 204 C [-65 F to + 400 F].
For more information, refer
to catalog E-HO EV-M C001-E.
Smooth Bore SCTW Series Hose
Hi-PSI Series hose is a heavywall PTFE hose for very high
pressure applications. T he
reinforcement is braided and
not spiraled allowing for bet-
ter hose flexibility.
Temperature range is -54Cto + 204 C [-65 F to + 400 F].
For more information, refer
to catalog E-HO EV-M C001-E.
Smooth Bore Hi-PSI Series Hose
Convoluted PTFE tube with
304 stainless steel wire
braid reinforcement.
Industrial applications
include: automotive, platten
presses, pharmaceutical,truck and bus, reverse
osmosis, hydraulics, chemi-
cal processing, steam, air,
water, tire manufacturing,
electronics, steel mills, food
processing, and tank truck
transfer. Tem perature range
is -54C to + 204C [-65F to
+ 400F].For more information, refer
to catalog E-HO EV-M C001-E.
Conductive & Non-ConductiveConvoluted Hose Conv-O-Crimp
-
7/27/2019 Aeroquip Hose
10/47
20 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
FC252Silicone rubber (heater)
M aximum M inimum M inimumOperat ing Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft
FC252-06 9,7 0.38 18,3 0.72 3,5 50 14,0 200 38,1 1.50 0,22 0.15
FC252-08 12,7 0.50 20,6 0.81 3,5 50 14,0 200 50,8 2.00 0,27 0.18FC252-10 16,0 0.63 23,9 0.94 2,8 40 11,0 160 63,5 2.50 0,28 0.19
FC252-12 19,1 0.75 26,9 1.06 2,8 40 11,0 160 76,2 3.00 0,41 0.28
FC252-16 25,4 1.00 34,0 1.34 2,5 35 10,0 140 101,6 4.00 0,53 0.36
ConstructionSilicone rubber tube, braided
fiber reinforcement and siliconerubber cover.
Operating Temperature Range54C to +177C [65F to +350F]
ApplicationHeater hose for passenger cars
and trucks; connecting lines fromhot water heaters to coolant-cir-
culating systems. For more infor-mation on specific fluid applica-
tions and high temperature rat-ings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
FC352Silicone rubber (coolant)
M aximum M inimumOperat ing Burst Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure of Hose
mm in mm in bar psi bar psi Kg/m lbs/ft
FC352-08 12,7 0.50 23,9 0.94 7,0 100 30,0 425 0,25 0.17
FC352-10 16,0 0.63 26,9 1.06 7,0 100 30,0 425 0,32 0.22
FC352-12 19,1 0.75 30,2 1.19 7,0 100 30,0 425 0,40 0.27
FC352-14 22,4 0.88 33,5 1.32 7,0 100 30,0 425 0,46 0.31
FC352-16 25,4 1.00 36,6 1.44 6,0 90 26,0 375 0,50 0.34
FC352-18 28,4 1.12 39,6 1.56 6,0 90 26,0 375 0,61 0.41
FC352-20 31,8 1.25 42,9 1.69 5,9 85 24,0 350 0,66 0.45
FC352-22 35,1 1.38 46,2 1.82 5,9 85 24,0 350 0,74 0.50
FC352-24 38,1 1.50 49,3 1.94 5,9 85 24,0 350 0,81 0.55
FC352-26 41,4 1.63 52,3 2.06 5,6 80 22,0 325 0,86 0.58
FC352-28 44,5 1.75 55,6 2.19 5,6 80 22,0 325 0,93 0.63
FC352-32 50,8 2.00 62,0 2.44 5,2 75 21,0 300 1,06 0.72
FC352-36 57,2 2.25 68,3 2.69 5,2 75 21,0 300 1,20 0.81
FC352-38 60,1 2.38 71,6 2.82 4,2 60 17,0 250 1,24 0.84
FC352-40 63,5 2.50 74,7 2.94 4,2 60 17,0 250 1,31 0.89
FC352-44 69,9 2.75 81,0 3.19 3,5 50 14,0 200 1,45 0.98
FC352-48 76,2 3.00 87,4 3.44 3,5 50 14,0 200 1,56 1.06
FC352-56 88,9 3.50 100,1 3.94 2,8 40 12,0 175 1,85 1.25
FC352-64 101,6 4.00 112,8 4.44 2,5 35 10,5 150 2,13 1.44
FC352-96 152,4 6.00 164,3 6.47 2,0 25 7,0 100 3,45 2.34
FC352-112 177,8 7.00 189,7 7.47 1,0 19 6,0 75 4,03 2.73
ConstructionSilicone rubber tube, four spiralsof nylon and silicone rubber
cover.
Operating Temperature Range54C to +177C [65F to +350F]
ApplicationCoolant system service with liq-uid-cooled engines. For more
information on specific fluidapplications and high tempera-
ture ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference Page
Reusable
Clamp 184
Fitting Reference Page
Reusable
Clamp 184
-
7/27/2019 Aeroquip Hose
11/47
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
2550/2554
Airbrake
SAE J 1402 FMVSS106
M aximum M inimum M inimumOperat ing Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft
2550-6 9,7 0.38 19,1 0.75 16,0 225 62,0 900 44,5 1.75 0,30 0.20
2554-6 9,7 0.38 19,1 0.75 16,0 225 62,0 900 95,3 3.75 0,27 0.18
ConstructionSynthetic rubber tube, double
textile braids and syntheticrubber cover.
Operating Temperature Range2550: 40C to + 93C
[40F to + 200F],
2554: 54C to + 100C[65F to + 212F]
ApplicationTractor to trailer lines, axle cham-
ber lines and tractor servicelines. For more information on
specific fluid applications andhigh tem perature ratings, see
pages 349-355.
2554 C onforms to ordinancespec. M IL-H -3992B,
Type 1, C lass 1.
For Complete Agency ListingsSee pages 346-348.
2570SAE J 1402 FMVSS106
M aximum M inimum M inimumOperat ing Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in. mm in. bar psi bar psi mm in. Kg/m lbs/ft
2570-6 9,7 0.38 19,1 0.75 16,0 225 62,0 900 44,5 1.75 0,27 0.18
2570-8 12,7 0.50 22,4 0.88 16,0 225 62,0 900 50,8 2.00 0,34 0.23
2570-10 15,7 0.62 26,9 1.06 16,0 225 62,0 900 57,2 2.25 0,44 0.30
Construction
Synthetic rubber tube, doubletextile braid and synthetic rubber
cover.
Operating Temperature Range40C to +100C [40F to +212F]
Application
Tractor to trailer lines, axle cham-ber lines and tractor service
lines. For more information onspecific fluid applications and
high temperature ratings, seepages 349-355.
For Complete Agency Listings
See pages 346-348.
Crimp Fittings only,
contact Eaton Aeroquip.
FC629SAE J 1402 FMVSS106
M aximum M inimum M inimumOperat ing Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in. mm in. bar psi bar psi mm in. Kg/m lbs/ft
FC629-06 9,7 0.38 19,8 0.78 15,0 225 62,0 900 44,5 1.75 0,27 0.18
FC629-08 12,7 0.50 23,1 0.91 15,0 225 62,0 900 50,8 2.00 0,30 0.20
ConstructionSynthetic rubber tube, single
polyester braid and syntheticrubber cover.
Operating Temperature Range40C to +100C [40F to +212F]
ApplicationTractor to trailer lines, axle
chamber lines and tractor servicelines. For more information on
specific fluid applications andhigh tem perature ratings, see
pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
r
r
Fitting Reference Page
Reusable
Fit t ing 182
Socket Data 65
Factory crimp fit t ings alsoavailable. Contact Eaton fordetails.
Fitting Reference Page
ReusableFit t ing 182
Socket Data 65
Factory crimp fit t ings alsoavailable. Contact Eaton fordetails.
Factory crimp fit t ings available.Contact Eaton for details.
-
7/27/2019 Aeroquip Hose
12/47
22 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
FC829
AirbrakeSAE J 1402 FMVSS106
M aximum M inimum M inimumOperat ing Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in. mm in. bar psi bar psi mm in. Kg/m lbs/ft
FC829-08 12,7 0.50 23,1 0.91 15 225 62 900 76,2 3.00 0,27 0.18
ConstructionEPD M rubber tube, double tex-tile braids and EPD M rubber
cover.
Operating Temperature Range40C to +100C [40F to +212F]
ApplicationTractor to trailer lines, axle cham-ber lines and tractor service
lines. For more information onspecific fluid applications and
high temperature ratings, seepages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
1531/1531A
Railroad Airbrake
Exceeds AAR-M618
M aximum M inimum M inimumOperat ing Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in. mm in. bar psi bar psi mm in. Kg/m lbs/ft
1531-10 12,7 0.50 23,9 0.94 21,0 300 84,0 1200 139,7 5.50 0,57 0.38
1531-12 16,0 0.63 28,4 1.12 21,0 300 84,0 1200 165,1 6.50 0,71 0.48
1531-16 22,4 0.88 35,1 1.38 21,0 300 84,0 1200 187,5 7.38 1,07 0.72
1531-20 28,7 1.13 41,4 1.63 21,0 300 84,0 1200 241,3 9.50 1,16 0.78
1531A-24 35,1 1.38 47,8 1.88 21,0 300 84,0 1200 266,7 10.50 1,55 1.04
ConstructionSynthetic rubber tube, partial tex-
tile braid, wire reinforcement(1531-10 and 1531-12 have single
wire braid; 1531-16, 1531-20 and1531A-24 have double w ire
braid) and synthetic rubber cover.
Operating Temperature Range54C to +100C [65F to +212F]
ApplicationLocomotive airbrake lines.
For more information on specificfluid applications and high
temperature ratings, see pages349-355.
For Complete Agency ListingsSee pages 346-348.
r
Factory crimp fi tt ings available.Contact Eaton for details.
Fitting Reference Page
Reusable
Fit t ing 185
Socket Data 65
Crimp fitt ings also availablefor these sizes. ContactEaton for information.
-
7/27/2019 Aeroquip Hose
13/47
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
FC355 AQPEngine & Airbrake
FMVSS106
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ftFC355-04 4,8 0.19 13,2 0.52 105,0 1500 420,0 6000 19,1 0.75 94,8 28 0,22 0.17
FC355-05 6,4 0.25 14,7 0.58 105,0 1500 420,0 6000 25,4 1.00 94,8 28 0,34 0.20
FC355-06 7,9 0.31 17,3 0.68 105,0 1500 420,0 6000 31,8 1.25 94,8 28 0,35 0.24
FC355-08 10,4 0.41 19,6 0.77 87,0 1250 350,0 5000 44,5 1.75 94,8 28 0,43 0.29
FC355-10 12,7 0.50 23,9 0.94 87,0 1250 350,0 5000 57,2 2.25 94,8 28 0,59 0.40
FC355-12 16,0 0.63 27,4 1.08 52,0 750 210,0 3000 69,9 2.75 67,7 20 0,68 0.46
FC355-16 22,4 0.88 31,5 1.24 28,0 400 112,0 1600 88,9 3.50 50,8 15 0,74 0.50
FC355-20 28,7 1.13 38,6 1.52 21,0 300 87,0 1250 114,3 4.50 50,8 15 0,87 0.59
FC355-24 35,1 1.38 44,5 1.75 17,0 250 70,0 1000 139,7 5.50 37,2 11 1,02 0.69
FC355-32 46,0 1.81 56,4 2.22 14,0 200 56,0 800 215,9 8.50 37,2 11 1,37 0.93
ConstructionAQ P elastomer tube, polyester
inner braid and a single wirebraid reinforcement, blue AQ P
elastomer cover.
Operating Temperature Range40C to +150C [40F to +302F]
A ir not to exceed 250 psi or
+ 121C [+ 250F].
ApplicationA ir, gasoline, fuel, lubricating oils
and coolants. For more informa-tion on specific fluid applications
and high temperature ratings,see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
FC350 AQPEngine & Airbrake
FMVSS106
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
FC350-04 4,8 0.19 13,2 0.52 140,0 2000 560,0 8000 19,1 0.75 94,8 28 0,22 0.13
FC350-05 6,4 0.25 14,7 0.58 105,0 1500 420,0 6000 25,4 1.00 94,8 28 0,34 0.16
FC350-06 7,9 0.31 17,3 0.68 105,0 1500 420,0 6000 31,8 1.25 94,8 28 0,35 0.20
FC350-08 10,4 0.41 19,6 0.77 87,0 1250 350,0 5000 44,5 1.75 94,8 28 0,43 0.23
FC350-10 12,7 0.50 23,9 0.94 87,0 1250 350,0 5000 57,2 2.25 94,8 28 0,59 0.33
FC350-12 16,0 0.63 27,4 1.08 52,0 750 210,0 3000 69,9 2.75 67,7 20 0,68 0.39
FC350-16 22,4 0.88 31,2 1.23 28,0 400 112,0 1600 88,9 3.50 50,8 15 0,74 0.50FC350-20 28,4 1.12 38,1 1.50 21,0 300 84,0 1200 114,3 4.50 50,8 15 0,87 0.56
FC350-24 35,1 1.38 44,5 1.75 17,0 250 70,0 1000 139,7 5.50 37,2 11 1,02 0.63
ConstructionAQ P elastomer tube, polyesterinner braid and a single wirebraid reinforcement; black poly-
ester textile braided cover.
Operating Temperature Range49C to +150C [55F to +302F]
A ir not to exceed + 121C
[+ 250F].
ApplicationA ir, gasoline, fuel lubricating oilsand coolants. For more informa-tion on specific fluid applications
and high temperature ratings,see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference Page
Crimp
100R5 134
Reusable
Fit t ing 136
Socket Data 65
Fitting Reference Page
Crimp
100R5 134
Reusable
Fit t ing 136
Socket Data 65
-
7/27/2019 Aeroquip Hose
14/47
24 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
FC650 AQPHigh temperature fuel & oil
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
FC650-04 4,8 0.19 12,2 0.48 70,0 1000 280,0 4000 19,1 0.75 94,8 28 0,15 0.10
FC650-06 7,9 0.31 16,0 0.63 70,0 1000 280,0 4000 31,8 1.25 94,8 28 0,22 0.15
FC650-08 10,4 0.41 18,8 0.74 70,0 1000 280,0 4000 44,5 1.75 94,8 28 0,28 0.19
FC650-10 12,7 0.50 21,1 0.83 70,0 1000 280,0 4000 57,2 2.25 94,8 28 0,34 0.23
FC650-12 16,0 0.63 25,1 0.99 70,0 1000 280,0 4000 69,9 2.75 67,7 20 0,41 0.28
ConstructionAQ P elastomer tube, single wire
braid reinforcement, black poly-ester braided cover.
Operating Temperature Range49C to +150C [55F to +302F]
A ir not to exceed + 121C[+ 250F].
ApplicationD iesel fuel, gasoline, lubricating
oils, water, coolant and air. N otapproved for airbrake applica-
tions. For more information onspecific fluid applications and
high tem perature ratings, seepages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
FC699 AQPHigh temperature fuel
AQP lightweight engine hose
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
FC699-04 6,4 0.25 12,4 0.49 28,0 400 112,0 1600 31,8 1.25 94,8 28 0,09 0.06
FC699-06 9,7 0.38 16,0 0.63 28,0 400 112,0 1600 38,1 1.50 94,8 28 0,15 0.10
FC699-08 12,7 0.50 19,6 0.77 28,0 400 112,0 1600 50,8 2.00 94,8 28 0,19 0.13
FC699-10 16,0 0.63 23,9 0.94 24,0 350 98,0 1400 63,5 2.50 61,0 18 0,27 0.18
FC699-12 19,1 0.75 27,4 1.08 24,0 350 98,0 1400 76,2 3.00 61,0 18 0,30 0.20
FC699-16 25,4 1.00 33,8 1.33 17,0 250 70,0 1000 114,3 4.50 61,0 18 0,41 0.28
ConstructionAQ P elastomer tube, singlearamid reinforcement braid andtextile braided cover.
Operating Temperature Range40C to +150C [40F to +302F].
A ir not to exceed 250 psi or
+ 121C [+250F].
ApplicationD iesel fuel, gasoline, crude andlubricating oils. For more informa-tion on specific fluid applicationsand high temperature ratings,see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Factory crimp fi tt ings available.Contact Eaton for details.
Fitting Reference PageCrimp
OTC 66
-
7/27/2019 Aeroquip Hose
15/47
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
FC234 AQPHigh temperature fuel and oil
Fire resistant USCG/MMT, NMMA/BIA
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ftFC234-05 6,4 0.25 14,7 0.58 105,0 1500 420,0 6000 25,4 1.00 94,8 28 0,32 0.22
FC234-06 7,9 0.31 17,3 0.68 105,0 1500 420,0 6000 31,8 1.25 94,8 28 0,37 0.25
FC234-08 10,4 0.41 19,3 0.76 87,0 1250 350,0 5000 44,5 1.75 94,8 28 0,44 0.30
FC234-10 12,7 0.50 23,9 0.94 87,0 1250 350,0 5000 57,2 2.25 94,8 28 0,66 0.45
FC234-12 16,0 0.63 27,4 1.08 52,0 750 210,0 3000 69,9 2.75 67,7 20 0,71 0.48
FC234-16 22,4 0.88 31,5 1.24 28,0 400 112,0 1600 88,9 3.50 54,2 16 0,75 0.51
ConstructionAQ P elastomer tube, brass plat-ed steel wire reinforcement,
braided refractory insulation andblue AQ P elastomer cover.
Operating Temperature Range40C to +150C [40F to +302F]
ApplicationD iesel fuel, gasoline, hot lube oiland water. For more information
on specific fluid applications andhigh temperature ratings, see
pages 349-355.
For Complete Agency ListingsSee pages 346-348.
2651Single wire braid
SAE 100R5 performance
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
2651-4 4,8 0.19 13,2 0.52 210,0 3000 840,0 12000 76,2 3.00 94,8 28 0,19 0.13
2651-5 6,4 0.25 14,7 0.58 210,0 3000 840,0 12000 85,9 3.38 94,8 28 0,24 0.16
2651-6 7,9 0.31 17,3 0.68 157,0 2250 630,0 9000 101,6 4.00 94,8 28 0,34 0.23
2651-8 10,4 0.41 19,1 0.75 140,0 2000 560,0 8000 117,3 4.62 94,8 28 0,38 0.26
2651-10 12,7 0.50 23,4 0.92 122,0 1750 490,0 7000 139,7 5.50 94,8 28 0,55 0.37
2651-12 16,0 0.63 27,4 1.08 105,0 1500 420,0 6000 165,1 6.50 94,8 28 0,68 0.46
2651-16 22,4 0.88 31,2 1.23 56,0 800 224,0 3200 187,5 7.38 67,7 20 0,65 0.44
2651-20 28,4 1.12 38,1 1.50 43,0 625 175,0 2500 228,6 9.00 67,7 20 0,77 0.52
2651-24 35,1 1.38 44,5 1.75 35,0 500 140,0 2000 266,7 10.50 50,8 15 0,99 0.67
2651-32 46,0 1.81 56,4 2.22 24,0 350 98,0 1400 336,6 13.25 37,3 11 1,39 0.94
2651-40 60,1 2.38 73,2 2.88 24,0 350 98,0 1400 609,6 24.00 37,3 11 2,11 1.43
ConstructionSynthetic rubber tube, textileinner braid, single wire braid rein-
forcement, outer textile braid andsynthetic rubber cover.
Operating Temperature Range40C to +100C [40F to +212F]
ApplicationHydraulics, gasoline, fuel andlubricating oils, air and water. A ir
not to exceed 250 psi or + 71C[+ 160F]. For more information
on specific fluid applications andhigh tem perature ratings, see
pages 349-355.
For Complete Agency ListingsSee pages 346-348.
M aximum negative pressures
shown for -16 and larger are suit-able for hose which has suffered
no external damage or kinking. Ifgreater negative pressures are
required for -16 and larger hoses,the use of an internal support coil
is recommended.
r
r
Fitting Reference Page
Crimp
100R5 134
Reusable
Fit t ing 136
Socket Data 65
Fitting Reference PageReusable
Fit t ing 136
Socket Data 65
-
7/27/2019 Aeroquip Hose
16/47
26 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
303/302ASingle wire braid
MIL-DTL-8794
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
303-4 4,8 0.19 13,2 0.52 210,0 3000 840,0 12000 76,2 3.00 94,8 28 0,22 0.15303-5 6,4 0.25 14,7 0.58 210,0 3000 700,0 10000 85,9 3.38 94,8 28 0,28 0.19
303-6 7,9 0.31 17,3 0.68 140,0 2000 630,0 9000 101,6 4.00 94,8 28 0,32 0.22
303-8 10,4 0.41 19,6 0.77 140,0 2000 560,0 8000 117,3 4.62 94,8 28 0,38 0.26
303-10 12,7 0.50 23,4 0.92 122,0 1750 490,0 7000 139,7 5.50 94,8 28 0,53 0.36
303-12 16,0 0.63 27,4 1.08 105,0 1500 420,0 6000 165,1 6.50 94,8 28 0,62 0.46
302A-16 22,4 0.88 31,2 1.23 56,0 800 224,0 3200 187,5 7.38 94,8 28 0,55 0.44
302A-20 28,4 1.12 38,1 1.50 42,0 600 175,0 2500 228,6 9.00 94,8 28 0,68 0.52
302A-24 35,1 1.38 44,5 1.75 35,0 500 140,0 2000 279,4 11.00 94,8 28 0,81 0.67
302A32 46,0 1.81 56,4 2.22 24,0 350 98,0 1400 336,6 13.25 94,8 28 1,15 0.94
ConstructionSynthetic rubber tube, textile inner
braid, single wire braid reinforce-
ment and black texti le braid cover.Operating Temperature Range303 hose: 54C to + 121C
[65F to +250F]
302A hose: 40C to + 121C[40F to + 250F]
ApplicationHydraulics, air, gasoline, fuel and
lubricating oils. A ir not to exceed
+ 71C [+ 160F]. For more infor-mation on specific fluid applica-tions and high temperature rat-
ings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
1503Single wire braid
SAE 100R5
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
1503-4 4,8 0.19 13,2 0.52 210,0 3000 840,0 12000 76,2 3.00 94,8 28 0,19 0.13
1503-5 6,4 0.25 14,7 0.58 210,0 3000 840,0 12000 85,9 3.38 94,8 28 0,24 0.16
1503-6 7,9 0.31 17,3 0.68 157,0 2250 630,0 9000 101,6 4.00 94,8 28 0,27 0.23
1503-8 10,4 0.41 19,6 0.77 140,0 2000 560,0 8000 117,3 4.62 94,8 28 0,32 0.26
1503-10 12,7 0.50 23,4 0.92 122,0 1750 490,0 7000 139,7 5.50 94,8 28 0,49 0.37
1503-12 16,0 0.63 27,4 1.08 105,0 1500 420,0 6000 165,1 6.50 94,8 28 0,58 0.46
1503-16 22,4 0.88 31,2 1.23 56,0 800 224,0 3200 187,5 7.38 67,7 20 0,55 0.44
1503-20 28,4 1.12 38,1 1.50 43,0 625 175,0 2500 228,6 9.00 67,7 20 0,68 0.52
1503-24 35,1 1.38 44,5 1.75 35,0 500 140,0 2000 266,7 10.50 50,8 15 0,92 0.671503-32 46,0 1.81 56,6 2.23 24,0 350 98,0 1400 366,6 13.25 37,3 11 1,28 0.94
1503-40 60,1 2.38 73,2 2.88 24,0 350 98,0 1400 609,6 24.00 37,3 11 2,11 1.43
ConstructionSynthetic rubber tube, textile inner
braid, single wire braid reinforce-
ment and black textile braid cover.
Operating Temperature Range40C to +121C [40F to +250F]
A ir not to exceed
+ 71C ([+ 160F].
ApplicationHydraulics, air, gasoline, fuel and
lubricating oils. For more informa-
tion on specific fluid applicationsand high temperature ratings, see
pages 349-355.
M aximum negative pressuresshown for -16 and larger are suit-
able only for those which has suf-
fered no external damage or kink-ing. If greater negative pressures
are required for -16 and largerhoses, the use of an internal
support coil is recommended.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference Page
Reusable
Fit t ing 136
Socket Data 65
Fitting Reference Page
Crimp
100R5 134
Reusable
Fit t ing 136
Socket Data 65
-
7/27/2019 Aeroquip Hose
17/47
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
FC300 AQPSingle wire braid
Exceeds SAE 100R5
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
FC300-04 4,8 0.19 13,2 0.52 210,0 3000 840,0 12000 76,2 3.00 94,8 28 0,19 0.13FC300-05 6,4 0.25 14,7 0.58 210,0 3000 840,0 12000 85,9 3.38 94,8 28 0,24 0.16
FC300-06 7,9 0.31 17,3 0.67 157,0 2250 630,0 9000 101,6 4.00 94,8 28 0,27 0.23
FC300-08 10,4 0.41 19,6 0.76 140,0 2000 560,0 8000 117,3 4.62 94,8 28 0,32 0.26
FC300-10 12,7 0.50 23,4 0.93 122,0 1750 490,0 7000 139,7 5.50 94,8 28 0,49 0.37
FC300-12 16,0 0.63 27,4 1.08 105,0 1500 420,0 6000 165,1 6.50 94,8 28 0,58 0.46
FC300-16 22,4 0.88 31,2 1.27 56,0 800 224,0 3200 187,5 7.38 67,7 20 0,55 0.44
FC300-20 28,4 1.12 38,1 1.50 43,0 625 175,0 2500 228,6 9.00 67,7 20 0,68 0.52
FC300-24 35,1 1.38 44,5 1.75 35,0 500 140,0 2000 266,7 10.50 50,8 15 0,92 0.67
FC300-32 46,0 1.81 56,4 2.22 21,0 300 84,0 1200 336,6 13.25 37,3 11 1,28 0.94
FC300-40 60,1 2.38 73,2 2.88 21,0 300 84,0 1200 609,6 24.00 27,1 8 2,11 1.50
ConstructionAQ P elastomer tube, polyester
inner braid, single wire braid rein-forcement and blue polyester
braid cover.
Operating Temperature Range49C to +150C [55F to +302F]
A ir not to exceed
+ 121C [+ 250F].
ApplicationHydraulics handling petroleum
base fluids and air, gasoline, fueland lubricating oils, fire resistant
hydraulic fluids and other indus-trial fluids. For more information
on specific fluid applications andhigh temperature ratings,
see pages 349-355.
M aximum negative pressureshown for -16 and larger are suit-
able for those which has sufferedno external damage or kinking. If
greater negative pressures arerequired for -16 and larger hoses,
the use of an internal support coilis recommended.
Does not meet SAE 100R5pressure with reusable fittings.
-32 size rated to 350 psi withcrimp fittings.
For Complete Agency ListingsSee pages 346-348.
FC321
LPGUL listing MH6044
M aximum M inimum M inimumOperat ing Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft
FC321-04 4,8 0.19 13,2 0.52 24,0 350 122,0 1750 38,1 1.50 0,16 0.11
FC321-05 6,4 0.25 14,7 0.58 24,0 350 122,0 1750 44,5 1.75 0,19 0.13
FC321-06 7,9 0.31 17,0 0.67 24,0 350 122,0 1750 50,8 2.00 0,27 0.18
FC321-08 10,4 0.41 19,6 0.77 24,0 350 122,0 1750 58,7 2.31 0,31 0.21
FC321-10 12,7 0.50 23,4 0.92 24,0 350 122,0 1750 69,9 2.75 0,43 0.29
FC321-12 16,0 0.63 27,4 1.08 24,0 350 122,0 1750 82,6 3.25 0,55 0.37
FC321-16 22,4 0.88 31,5 1.24 24,0 350 122,0 1750 93,7 3.69 0,56 0.38
ConstructionSynthetic rubber tube, a textileinner braid, a stainless steel wirebraid reinforcement and a syn-
thetic rubber im pregnated textilebraid cover.
Operating Temperature Range40C to + 121C [40F to +250F]
ApplicationD esigned for butane-propaneapplications on either mobile orstationary equipment. For more
information on specific fluidapplications and high tempera-
ture ratings, see pages 349-355.
WARNING: LPG is a very haz-
ardous liquid or gas and should behandled with maximum care toprevent leakage. Since the gas is
heavier than air, it may flow alongthe ground if it escapes and cause
an explosion or a fire. N o leakageshould ever be tolerated.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference Page
Crimp
100R5 134Reusable
Fit t ing 136
Socket Data 65
Fitting Reference Page
Reusable
Fit t ing 136
Socket Data 65
-
7/27/2019 Aeroquip Hose
18/47
28 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
CR170LPGSingle stainless steel braidCGA (Canadian Gas Association) Type III
M aximum M inimum M inimumOperat ing Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft
CR170-04 4,8 0.19 13,2 0.52 24,0 350 840,0 12000 76,2 3.00 0,24 0.16CR170-06 7,9 0.31 17,0 0.67 24,0 350 630,0 9000 101,6 4.00 0,32 0.22
CR170-08 10,4 0.41 19,6 0.77 24,0 350 560,0 8000 117,3 4.62 0,38 0.26
CR170-12 15,9 0.63 28,0 1.10 24,0 350 414,0 6000 165,1 6.50 0,71 0.48
ConstructionNylon tube, single stainless steel
braid reinforcement, perforatedsynthetic rubber cover.
Operating Temperature Range40C to +121C [40F to +250F]
ApplicationLP G (propane) vehicle, alterna-
tive fuel conversion systems. Formore information on specific
fluid applications and high tem-perature ratings, see pages
349-355.
WARNING: LPG is a very haz-ardous liquid or gas and should be
handled with maximum care toprevent leakage. Since the gas is
heavier than air, it may flow alongthe ground if it escapes and cause
an explosion or a fire. No leakageshould ever be tolerated.
For Complete Agency ListingsSee pages 346-348.
NO TE: M ust be CGA certified to
crimp assemblies.
r
2807PTFE
SAE 100R14A
M aximum M inimum M inimumOperat ing Burst Bend Vacuum WeightPart Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
2807-3 3,6 0.14 6,4 0.25 210,0 3000 840,0 12000 38,1 1.50 94,8 28 0,06 0.04
2807-4 4,8 0.19 7,6 0.30 210,0 3000 840,0 12000 50,8 2.00 94,8 28 0,09 0.06
2807-5 6,6 0.26 9,4 0.37 210,0 3000 840,0 12000 76,2 3.00 94,8 28 0,12 0.08
2807-6 8,1 0.32 10,9 0.43 175,0 2500 700,0 10000 101,6 4.00 94,8 28 0,15 0.10
2807-8 10,7 0.42 13,7 0.54 140,0 2000 560,0 8000 133,4 5.25 94,8 28 0,18 0.12
2807-10 13,0 0.51 16,0 0.63 105,0 1500 420,0 6000 165,1 6.50 94,8 28 0,24 0.16
2807-12 16,3 0.64 19,3 0.76 84,0 1200 335,0 4800 196,9 7.75 94,8 28 0,27 0.18
2807-16 22,4 0.88 26,2 1.03 70,0 1000 280,0 4000 228,6 9.00 40,6 12 0,39 0.26
2807-20 28,4 1.12 32,8 1.29 43,0 625 175,0 2500 406,4 16.00 40,6 12 0,51 0.34
ConstructionExtruded PTFE tube with stain-
less steel single wire braid.
Operating Temperature Range73C to +260C [100F to +500F]
ApplicationHot air, steam, compressor dis-
charge and most chemical appli-cations. Not recommended for
steam-cold water cycling. Formore information on specific fluid
applications and high tempera-ture ratings, see pages 349-355.
Steam 200 psi at +388F max.Engineering information is avail-
able for specific critical tempera-ture requirements. C ontact Eaton.
M aximum negative pressure for -06 and larger are suitable for hose
which has suffered no externaldamage or kinking. If greater neg-
ative pressures are required for -06 and larger hoses, the use of an
internal support coil is recom-mended. Use of an internal sup-
port coil in -06 and larger PT FEhose is recommended for tube
support where extended or con-tinuous service at high tempera-
ture together with low or negativepressure is expected.
For Complete Agency ListingsSee pages 346-348.
r
Factory crimp fi tt ings available.Contact Eaton for details.
Fitting Reference PageCrimp
Fitting 129
Socket Data 64
Reusable
Fit t ing 186
Socket Data 65
-
7/27/2019 Aeroquip Hose
19/47
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
S-TW SeriesSmooth BoreMeets SAE 100R14A
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
S-4TW 4,8 0.19 7,6 0.30 210,0 3000 840,0 12000 50,8 2.00 94,8 28 0,09 0.06
S-5TW 6,6 0.26 9,4 0.37 210,0 3000 840,0 12000 76,2 3.00 94,8 28 0,12 0.08S-6TW 8,1 0.32 10,9 0.43 175,0 2500 700,0 10000 101,6 4.00 94,8 28 0,15 0.10
S-8TW 10,7 0.42 13,7 0.54 140,0 2000 560,0 8000 127,0 5.00 94,8 28 0,18 0.12
S-10TW 13,0 0.51 16,0 0.63 105,0 1500 420,0 6000 165,1 6.50 94,8 28 0,24 0.16
S-12TW 16,3 0.64 19,3 0.76 84,0 1200 335,0 4800 190,5 7.50 94,8 28 0,27 0.18
S-16TW 22,4 0.88 26,2 1.03 70,0 1000 280,0 4000 228,6 9.00 40,6 12 0,35 0.26
ConstructionExtruded PTFE tube with stain-
less steel single wire braid.
Operating Temperature Range54C to +230C [65F to + 450F]
ApplicationHot air, steam, compressor dis-
charge and most chemical appli-cations. Not recommended for
steam-cold water cycling. Formore information on specific fluid
applications and high tem peratureratings, see pages 349-355.
M aximum negative pressure for-16 and larger are suitable for
hose which has sufferend noexternal damage or kinking. If
greater negative pressures arerequired for -16 and larger hoses,
the use of an internal support coilis recomm ended. Use of an inter-
nal support coil in -06 and largerPTFE hose is recommended for
tube support where extended orcontinuous service at high tem-
perature together with low or neg-ative pressure is expected.
For Complete Agency ListingsSee pages 346-348.
* See Everflex catalogE-HO EV-M C001-E for additional
hose sizes and fitting options.
FC465PTFEConductive SAE 100R14BFDA Compliant per 21CFR178.3297
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
FC465-03 3,6 0.14 6,4 0.25 210,0 3000 840,0 12000 38,1 1.50 94,8 28 0,06 0.04
FC465-04 4,8 0.19 7,6 0.30 210,0 3000 840,0 12000 50,8 2.00 94,8 28 0,09 0.06
FC465-05 6,6 0.26 9,4 0.37 210,0 3000 840,0 12000 76,2 3.00 94,8 28 0,12 0.08
FC465-06 8,1 0.32 10,9 0.43 175,0 2500 700,0 10000 101,6 4.00 94,8 28 0,15 0.10
FC465-08 10,7 0.42 13,7 0.54 140,0 2000 560,0 8000 133,4 5.25 94,8 28 0,18 0.12
FC465-10 13,0 0.51 16,0 0.63 105,0 1500 420,0 6000 165,1 6.50 94,8 28 0,24 0.16
FC465-12 16,3 0.64 19,3 0.76 84,0 1200 335,0 4800 196,9 7.75 94,8 28 0,27 0.18
FC465-16 22,4 0.88 26,2 1.03 70,0 1000 280,0 4000 228,6 9.00 40,6 12 0,39 0.26
FC465-20 28,4 1.12 32,8 1.29 43,0 625 175,0 2500 406,4 16.00 40,6 12 0,51 0.34
ConstructionConductive extruded black PT FE
tube with stainless steel singlewire braid.
Operating Temperature Range73C to +260C [100F to +500F]
ApplicationSteam, compressor discharge and
most chemical applications. Notrecommended for steam-cold
water cycling. For more informa-
tion on specific fluid applicationsand high temperature ratings, see
pages 349-355.
Steam 200 psi at +388F max.Engineering information is available
for specific critical temperature
requirements. Contact Eaton.
M aximum negative pressure for -06 and larger are suitable for hose
which has suffered no externaldamage or kinking. If greater nega-
tive pressures are required for -06
and larger hoses, the use of aninternal support coil is recommend-
ed. U se of an internal support coil
in -06 and larger PTFE hose is rec-ommended for tube support where
extended or continuous service at
high temperature together with lowor negative pressure is expected.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference Page
Crimp
Fitting 129
Socket Data 64
Reusable
Fit t ing 186
Socket Data 65
Fitting Reference Page
Crimp
Fitting 129
Socket Data 64
Reusable
Fit t ing 186
Socket Data 65
-
7/27/2019 Aeroquip Hose
20/47
30 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
2808PTFE
M aximum M inimum M inimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
2808-08 10,7 0.42 14,7 0.58 190,0 2750 758,0 11000 117,3 4.62 94,8 28 0,30 0.20
2808-10 12,9 0.51 17,3 0.68 172,0 2500 689,0 10000 139,7 5.50 94,8 28 0,39 0.26
2808-12 16,5 0.65 20,6 0.81 121,0 1750 483,0 7000 165,1 6.50 67,7 20 0,45 0.30
2808-16 22,3 0.88 27,7 1.09 103,0 1500 414,0 6000 187,4 7.38 50,8 15 0,65 0.44
2808-20 28,4 1.12 34,3 1.35 78,0 1125 310,0 4500 279,4 11.00 50,8 15 0,85 0.57
2808-24 35,0 1.38 41,1 1.62 55,0 800 221,0 3200 355,6 14.00 50,8 15 1,04 0.70
ConstructionExtruded PTFE tube with doublestainless steel braids.
Operating Temperature Range73C to +260C [100F to +500F]
ApplicationHot air, steam and most chemi-cal applications. Not recom-
mended for steam-cold watercycling. For more information on
specific fluid applications andhigh tem peratre ratings, see
pages 400-404.
Steam 200 psi at +388F max.
Engineering information is avail-able for specific critical tempera-
ture requirements.Contact Eaton.
M aximum negative pressure for -
08 and larger are suitable for hosewhich has suffered no external
damage or kinking. If greater neg-ative pressures are required for -
08 and larger hoses, the use of aninternal support coil is recom-
mended. Use of an internal sup-port coil in -08 and larger PT FE
hose is recommended for tubesupport where extended or con-tinuous service at high tempera-
ture together with low or negativepressure is expected.
For Complete Agency ListingsSee pages 397-398.
r
FC469PTFE
Conductive
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in. mm in. bar psi bar psi mm in. kPa in/Hg Kg/m lbs/ft
FC469-06 7,6 0.30 12,2 0.48 280,0 4000 1120,0 16000 63,5 2.50 94,8 28 0,25 0.17
FC469-08 9,9 0.39 15,5 0.61 280,0 4000 1120,0 16000 73,2 2.88 94,8 28 0,36 0.24
FC469-10 12,4 0.49 18,3 0.72 245,0 3500 980,0 14000 82,6 3.25 94,8 28 0,43 0.29
ConstructionConductive extruded PTFE tube
with stainless steel single wirebraid.
Operating Temperature Range54C to +204C [65F to + 400F]
ApplicationHigh pressure chemical and fluid
transfer. For information on spe-cific fluid applications and high
temperature ratings, see pages400-404.
Steam 200 psi at +388F max.Engineering information is avail-
able for specific critical tempera-ture requirements.
Contact Eaton.
Use of an internal support coil in-06 and larger PT FE hose is rec-
ommended for tube supportwhere extended or continuous
service at high tem peraturetogether with low or negative
pressure is expected.
For Complete Agency ListingsSee pages 397-398.
r
Fitting Reference Page
Reusable
Fit t ing 189
Socket Data 65
Contact Eaton for fitt ing i nformation.
-
7/27/2019 Aeroquip Hose
21/47
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
FC363Convoluted PTFE
Nonconductive tube
M aximum M inimum M inimum M inimumOperat ing Burst Bend Kink Vacuum
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Radius Service
mm in mm in bar psi bar psi mm in mm in kPa in/Hg
FC363-08 13,7 0.54 18,8 0.74 87,0 1250 350,0 5000 73,2 2.88 25,4 1.00 94,8 28
FC363-10 16,0 0.63 22,4 0.88 69,0 1000 248,0 3600 76,2 3.00 38,1 1.50 94,8 28
FC363-12 20,6 0.81 26,9 1.06 76,0 1100 303,0 4400 95,3 3.75 50,8 2.00 94,8 28
FC363-16 25,4 1.00 32,5 1.28 70,0 1000 280,0 4000 127,0 5.00 63,5 2.50 81,3 24
FC363-20 31,5 1.24 38,9 1.53 70,0 1000 280,0 4000 158,8 6.25 88,9 3.50 67,7 20
FC363-24 38,6 1.52 46,0 1.81 52,0 750 210,0 3000 190,5 7.50 114,3 4.50 40,6 12
FC363-32 50,8 2.00 58,7 2.31 35,0 500 140,0 2000 254,0 10.00 152,4 6.00 16,9 5
ConstructionConvoluted PTFE tube withstainless steel single wire braid
cover.
Operating Temperature Range54C to +204C [65F to + 400F]
ApplicationChemical, food, water and wastehandling, and various transfer
applications. Not recomm endedfor steam-cold water cycling or
air. For more information onspecific fluid applications and
high temperature ratings, seepages 349-355.
Steam 200 psi at +388F max.Engineering information isavailable for specific critical
temperature requirements.Contact Eaton.
For Complete Agency ListingsSee pages 346-348.
FC364Convoluted PTFE
Conductive tube
M aximum M inimum M inimum M inimumOperat ing Burst Bend Kink Vacuum
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Radius Service
mm in mm in bar psi bar psi mm in mm in kPa in/Hg
FC364-08 13,7 0.54 18,8 0.74 87,0 1250 350,0 5000 73,2 2.88 25,4 1.00 94,8 28
FC364-10 16,0 0.63 22,4 0.88 69,0 1000 248,0 3600 76,2 3.00 38,1 1.50 94,8 28
FC364-12 20,6 0.81 26,9 1.06 76,0 1100 303,0 4400 95,3 3.75 50,8 2.00 94,8 28
FC364-16 25,4 1.00 32,3 1.27 70,0 1000 280,0 4000 127,0 5.00 63,5 2.50 81,3 24
FC364-20 31,5 1.24 38,9 1.53 70,0 1000 280,0 4000 158,8 6.25 88,9 3.50 67,7 20
FC364-24 38,6 1.52 46,0 1.81 52,0 750 210,0 3000 190,5 7.50 114,3 4.50 40,6 12
FC364-32 50,8 2.00 58,7 2.31 35,0 500 140,0 2000 254,0 10.00 152,4 6.00 16,9 5
ConstructionConvoluted conductive PT FE
tube with stainless steel wirebraid cover.
Operating Temperature Range54C to + 204C [65F to + 400F]
ApplicationSteam lines and fuel transfer
applications where staticdissipation is required. Not
recommended for steam-coldwater cycling or air. For more
information on specific fluidapplications and high temperature
ratings, see pages 349-355.
Steam 200 psi at +388F max.Engineering information is
available for specific criticaltemperature requirements.
Contact Eaton.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference Page
Crimp
Fit t ing 131
Socket Data 64
OTC* 66* Applications under 250 psi (sizes -10
thru -24) not recommended for air appli-cations.
Fitting Reference Page
Crimp
Fit t ing 131
Socket Data 64
OTC* 66* Applications under 250 psi (sizes -10thru -24) not recommended for air appli-cations.
-
7/27/2019 Aeroquip Hose
22/47
32 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
2575Low pressure SOCKETLESSTextile Braid
M aximum M inimum M inimumOperat ing Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft
2575-4 6,4 0.25 11,9 0.47 17,0 250 70,0 1000 76,2 3.00 0,13 0.09
2575-6 9,7 0.38 15,8 0.62 17,0 250 70,0 1000 101,6 4.00 0,19 0.13
2575-8 12,7 0.50 19,1 0.75 17,0 250 70,0 1000 127,0 5.00 0,25 0.17
2575-10 16,0 0.63 23,1 0.91 14,0 200 56,0 800 152,4 6.00 0,30 0.20
2575-12 19,1 0.75 26,2 1.03 14,0 200 56,0 800 177,8 7.00 0,33 0.22
ConstructionSynthetic rubber tube, textile braid
reinforcement, black synthetic
rubber cover (only).
Operating Temperature Range40C to +100C [40F to +212F]
Water not to exceed +66C[+ 150F] and air not to exceed
+ 71C [+ 160F].
ApplicationFor gasoline, fuel and lubricating
oils, air and water. N ot recom-
mended for hydraulic impulseapplications and not approved for
airbrake applications. For moreinformation on specific fluid appli-
cations and high temperature rat-
ings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference Page
Reusable
Fit t ing 176
FC563Convoluted PTFE
Nonconductive tube
M aximum M inimum M inimum
Operat ing Burst Bend VacuumPart Number Hose I.D. Hose O.D. Pressure Pressure Radius Service
mm in mm in bar psi bar psi mm in kPa in/Hg
FC563-08 13,7 0.54 18,8 0.74 87,0 1250 350,0 5000 73,2 2.88 94,8 28
FC563-12 20,6 0.81 29,9 1.06 76,0 1100 303,0 4400 95,3 3.75 94,8 28
FC563-16 25,4 1.00 32,5 1.28 70,0 1000 280,0 4000 127,0 5.00 81,2 24
FC563-20 31,5 1.24 38,9 1.53 70,0 1000 280,0 4000 158,8 6.25 67,7 20
FC563-24 38,6 1.52 46,0 1.81 52,0 750 210,0 3000 190,5 7.50 33,9 10
FC563-32 50,8 2.00 58,7 2.31 35,0 500 140,0 2000 254,0 10.00 23,7 7
ConstructionConvoluted PTFE tube with stain-less steel single wire braid rein-
forcement and integral black poly-
ester overbraid cover.
Operating Temperature Range54C to +150C [65F to +300F]
ApplicationChemical transfer and variouschemical processing applications.
Not recomm ended for steam or
steam-cold water cycling. For
more information on specific fluidapplications and high temperature
ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference Page
Crimp
Fit t ing 131
Socket Data 64
Factory crimp only.
-
7/27/2019 Aeroquip Hose
23/47
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
FC332-04 6,4 0.25 12,4 0.49 17,0 250 70,0 1000 76,2 3.00 94,8 28 0,12 0.08FC332-06 9,7 0.38 16,0 0.63 17,0 250 70,0 1000 76,2 3.00 94,8 28 0,18 0.12
FC332-08 12,7 0.50 19,1 0.75 17,0 250 70,0 1000 127,0 5.00 94,8 28 0,22 0.15
FC332-10 16,0 0.63 23,1 0.91 17,0 250 70,0 1000 152,4 6.00 60,9 18 0,30 0.20
FC332-12 19,1 0.75 26,4 1.04 17,0 250 70,0 1000 177,8 7.00 60,9 18 0,42 0.28
FC332 AQPLow pressure SOCKETLESSTextile Braid
ConstructionAQ P elastomer tube, textile braid
reinforcement, A Q P elastomercover.
Operating Temperature Range40C to +150C [40F to +302F]
A ir not to exceed + 121C
[+ 250F] and water not toexceed + 82C [+ 180F].
ApplicationFor gasoline, fuel and lubricating
oils, air and water. N ot recom-mended for hydraulic impulse
applications and not approved forairbrake applications. For more
information on specific fluidapplications and hightemperature ratings, see pages
349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference Page
Reusable
Fit t ing 176
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
FC647-04* 6,4 0.25 13,2 0.52 25,0 360 99,0 1440 76,2 3.00 94,8 28 0,09 0.06
FC647-06* 9,7 0.38 16,8 0.66 21,0 300 84,0 1200 76,2 3.00 94,8 28 0,15 0.09
FC647-08* 12,7 0.50 20,1 0.79 21,0 300 84,0 1200 127,0 5.00 94,8 28 0,18 0.12
FC647-10* 16,0 0.63 23,4 0.92 17,0 250 70, 0 1000 152,4 6.00 60,9 18 0,24 0.16
FC647-12* 19,1 0.75 26,7 1.05 17,0 250 70,0 1000 177,8 7.00 60,9 18 0,27 0.18
FC647Low pressure SOCKETLESSTextile braidFire resistant meets RMA/CGA flame test requirements
Construction
Synthetic rubber tube, textilebraid reinforcement, polyester
braided cover.
Operating Temperature Range40C to +100C [40F to +212F]
Water not to exceed +66C(+ 150F),
air not to exceed +74C (+ 165F).
Application
For gasoline, fuel and lubricatingoils, air and water. Not recom-
mended for hydraulic impulseapplications and not approved for
airbrake applications. For moreinformation on specific fluid
applications and high tempera-ture ratings, see pages 349-355.
* NO TE: You must insert the cor-
rect color code in the completepart number. C olor codes are
BLK = black, B LU = blue,BR N = brown, G RN = green,
WHT = white.Example: FC647-04GR N
is a green cover in dash size 4.
Not all sizes are available in
all colors.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference Page
Reusable
Fit t ing 176
-
7/27/2019 Aeroquip Hose
24/47
34 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
FC619Flexible 1/2 SAE bend
Wire inserted suctionExceeds SAE 100R4
M aximum M inimum M inimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
FC619-12 19,1 0.75 30,7 1.21 21,0 300 84,0 1200 63,5 2.50 94,8 28 0,68 0.46
FC619-16 25,4 1.00 37,6 1.48 17,0 250 70,0 1000 76,2 3.00 94,8 28 0,83 0.56
FC619-20 31,8 1.25 44,5 1.75 14,0 200 56,0 800 102,0 4.00 94,8 28 1,16 0.78
FC619-24 38,1 1.50 51,8 2.04 10,5 150 42,0 600 127,0 5.00 94,8 28 1,49 1.00
FC619-32 50,8 2.00 64,8 2.55 7,0 100 28,0 400 152,4 6.00 94,8 28 1,83 1.23
FC619-40 63,5 2.50 79,2 3.12 4,0 62 17,0 250 355,6 14.00 94,8 28 2,35 1.58
FC619-48 76,2 3.00 95,3 3.75 4,0 62 16,0 225 457,2 18.00 94,8 28 3,36 2.26
ConstructionSynthetic rubber tube, reinforce-
ment consisting of a helical wirebetween two textile reinforce-
ment layers and synthetic rubbercover.
Operating Temperature Range40C to +135C [40F to +275F]
ApplicationSuction and transfer applications
for petroleum hydraulic fluids,fuel, lubricating oils, gasoline,
water and many other industrialfluids. For more information on
specific fluid applications andhigh tem perature ratings, seepages 349-355.
M aximum working pressure forband clamp type fittings is 3,4 bar
[50 psi].
NOTE: -40 and -48 sizes requirespecial tooling for crimp f ittings.
Contact Eaton for information.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference Page
Crimp
OTC 66
TTC 66
-40, -48 133
Socket Data 64
Reusable
Nipple 66
Clamps 184
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
2556-4 6,4 0.25 12,4 0.49 25,0 360 99,0 1440 76,2 3.00 94,8 28 0,12 0.082556-6 9,7 0.38 15,7 0.62 21,0 300 84,0 1200 76,2 3.00 94,8 28 0,18 0.12
2556-8 12,7 0.50 19,1 0.75 21,0 300 84,0 1200 127,0 5.00 94,8 28 0,24 0.16
2556-10 16,0 0.63 23,1 0.91 17,0 250 70,0 1000 152,4 6.00 61,0 18 0,31 0.21
2556-12 19,1 0.75 26,2 1.03 17,0 250 70,0 1000 177,8 7.00 61,0 18 0,37 0.25
2565-4 6,4 0.25 12,7 0.50 21,0 300 87,0 1250 57,2 2.25 67,7 20 0,13 0.09
2565-6 9,7 0.38 16,0 0.63 17,0 250 70,0 1000 76,2 3.00 67,7 20 0,16 0.11
2565-8 12,7 0.50 19,8 0.78 14,0 200 52,0 750 95,3 3.75 33,9 10 0,25 0.17
2565-10 16,0 0.63 24,6 0.97 12,0 175 49,0 700 120,7 4.75 33,9 10 0,42 0.28
2565-12 19,1 0.75 27,7 1.09 8,5 125 35,0 500 139,7 5.50 33,9 10 0,45 0.30
2556/2565Low pressure SOCKETLESSTextile braidMeets performance requirements SAE 30R2 Type 1
ConstructionSynthetic rubber tube, textile braid
reinforcement, synthetic rubbercover.
Operating Temperature Range
2556: -40C to + 100C [-40F to+ 212F]. W ater not to exceed
+ 66C [+ 150F], air not to exceed
+ 160C [+ 71F].
2565: -54C to + 121C [-65F to+ 250F]. Water not to exceed
+ 66C [+ 150F], air not to exceed
+ 74C [+ 165F].
ApplicationFor gasoline, fuel and lubricating
oils, air and water. N ot recom-mended for hydraulic impulse
applications and not approved for
airbrake applications. For moreinformation on specific fluid appli-
cations and high temperature rat-
ings, see pages 349-355.
2565 is a low-tem perature syn-thetic rubber covered M IL-D TL-
13444 Type 1, C lass A hose.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference Page
Reusable
Fit t ing 176
-
7/27/2019 Aeroquip Hose
25/47
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
2661 AQPWire inserted suctionExceeds SAE 100R4
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
2661-12 19,1 0.75 31,8 1.25 21,0 300 84,0 1200 125,0 5.00 94,8 28 0,62 0,42
2661-16 25,4 1.00 38,1 1.50 17,0 250 70,0 1000 150,0 6.00 94,8 28 0,74 0,502661-20 31,8 1.25 45,7 1.80 14,0 200 56,0 800 200,0 8.00 94,8 28 1,34 0,90
2661-24 38,1 1.50 52,3 2.06 10,5 150 42,0 600 255,0 10.00 94,8 28 1,68 1,13
2661-32 50,8 2.00 64,8 2.55 7,0 100 28,0 400 300,0 12.00 94,8 28 1,93 1,30
2661-40 63,5 2.50 78,2 3.08 4,0 62 16,0 225 355,0 14.00 94,8 28 2,56 1,72
2661-48 76,2 3.00 90,9 3.58 4,0 62 16,0 225 460,0 18.00 94,8 28 2,92 1,96
2661-64 101,6 4.00 119,1 4.69 3,5 50 14,0 200 610,0 24.00 94,8 28 4,58 3,08
ConstructionAQ P elastomer tube, reinforce-
ment consisting of a helical wirebetween two textile braids and
blue AQ P elastomer cover.
Operating Temperature Range
40C to +150C [40F to +302F]
ApplicationSuction and transfer applications
for petroleum and fire resistanthydraulic fluids, fuel, lubricating
oils, gasoline, water and manyother industrial fluids. For more
information on specific fluidapplications and high tempera-
ture ratings, see pages 349-355.
M aximum working pressure forband clamp type fittings is 3,4 bar
[50 psi].
Sold as bulk hose only.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference Page
Crimp
OTC 66
TTC 66
-40, -48 133
Socket Data 64
Reusable
Nipple 66
Clamps 184
FC466Textile braid
Exceeds SAE 100R6 performance*
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
FC466-04 6,4 0.25 12,2 0.48 28,0 400 112,0 1600 63,5 2.50 94,8 28 0,09 0.06
FC466-06 9,7 0.38 15,7 0.62 28,0 400 112,0 1600 75,0 3.00 94,8 28 0,15 0.10
FC466-08 12,7 0.50 19,1 0.75 28,0 400 112,0 1600 100,0 4.00 94,8 28 0,19 0.13
FC466-10 16,0 0.63 23,1 0.91 24,0 350 98,0 1400 125,0 5.00 60,9 18 0,27 0.18
FC466-12 19,1 0.75 26,2 1.03 24,0 350 98,0 1400 150,0 7.00 60,9 18 0,28 0.19
ConstructionSynthetic rubber tube, textile
braid reinforcement and poly-ester braid cover.
Operating Temperature Range40C to +100C [40F to +212F],
A ir not to exceed +71C [+ 160F].
ApplicationFor gasoline, fuel, lubricating oils,
air and water. Not approved forairbrake applications. For moreinformation on specific fluid
applications and high tempera-ture ratings, see pages 349-355.
* All sizes except 12
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference Page
Crimp
OTC 66Skive Nipple** 66
Socket Data 64
* * No skiving required.
-
7/27/2019 Aeroquip Hose
26/47
36 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
M aximum M inimum M inimumOperat ing Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
FC598-04 6,4 0.25 12,2 0.50 28,0 400 112,0 1600 63,5 2.50 94,8 28 0,12 0.08
FC598-06 9,7 0.38 15,7 0.62 28,0 400 112,0 1600 75,0 3.00 94,8 28 0,19 0.13
FC598-08 12,7 0.50 19,1 0.78 28,0 400 112,0 1600 100,0 4.00 94,8 28 0,22 0.15
FC598-10 16,0 0.63 23,1 0.91 24,0 350 98,0 1400 125,0 5.00 60,9 18 0,30 0.20
FC598-12 19,1 0.75 26,2 1.03 24,0 350 98,0 1400 150,0 6.00 60,9 18 0,42 0.28
ConstructionAQ P elastomer tube, textile braidreinforcement, black AQ P elas-
tomer cover.
Operating Temperature Range40C to +150C [40F to +302F]
ApplicationLow pressure return lines inhydraulic systems. For more
information on specific fluidapplications and high tempera-
ture ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
FC598 AQPTextile braid
Exceeds SAE 100R6
Fitting Reference Page
Crimp
OTC 66
Skive Nipple** 66
Socket Data 64
* * No skiving required.
FC498 AQPTextile braid
Exceeds SAE 100R6
M aximum M inimum M inimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
FC498-04 6,4 0.25 12,7 0.50 28,0 400 112,0 1600 63,5 2.50 94,8 28 0,12 0.08
FC498-06 9,7 0.38 15,7 0.62 28,0 400 112,0 1600 75,0 3.00 94,8 28 0,19 0.13
FC498-08 12,7 0.50 19,1 0.75 28,0 400 112,0 1600 100,0 4.00 94,8 28 0,22 0.15
FC498-10 16,0 0.63 23,1 0.91 24,0 350 98,0 1400 125,0 5.00 60,9 18 0,30 0.20
FC498-12 19,1 0.75 26,2 1.03 24,0 350 98,0 1400 150,0 6.00 60,9 18 0,42 0.28
ConstructionAQ P elastomer tube, textile braidreinforcement, blue A Q P elas-
tomer cover.
Operating Temperature Range40C to +150C [40F to +302F]
ApplicationLow pressure return lines inhydraulic systems. For more
information on specific fluidapplications and high tempera-
ture ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference Page
Crimp
OTC 66
Skive Nipple** 66
Socket Data 64
* * No skiving required.
-
7/27/2019 Aeroquip Hose
27/47
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
2580Double textile braid
MIL-H-24136/3
M aximum M inimum M inimumOperat ing Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft
2580-4 4,8 0.19 13,2 0.52 70,0 1000 280,0 4000 76,2 3.00 0,18 0.12
2580-5 6,4 0.25 14,7 0.58 56,0 800 224,0 3200 85,9 3.38 0,22 0.152580-6 7,9 0.31 17,3 0.68 45,0 650 180,0 2600 101,6 4.00 0,25 0.17
2580-8 10,4 0.41 19,6 0.77 43,0 625 175,0 2500 117,3 4.62 0,28 0.19
2580-10 12,7 0.50 23,4 0.92 42,0 600 168,0 2400 139,7 5.50 0,42 0.28
2580-12 16,0 0.63 27,4 1.08 38,0 550 152,0 2200 165,1 6.50 0,51 0.34
2580-16 22,4 0.88 31,5 1.24 35,0 500 140,0 2000 187,5 7.38 0,54 0.36
2580-20 28,5 1.12 38,1 1.50 31,0 450 124,0 1800 228,6 9.00 0,64 0.43
2580-24 45,7 1.38 44,5 1.75 28,0 400 112,0 1600 266,7 10.50 0,76 0.51
2580-32 46,0 1.81 56,4 2.22 24,0 350 98,0 1400 336,6 13.25 1,12 0.75
ConstructionSynthetic rubber tube, double
textile braid reinforcementand synthetic rubber cover.
For larger dash sizes, see
Catalog A-M M -M C-0001-E.
Operating Temperature Range40C to +100C [40F to +212F].
ApplicationFor water, gasoline, and fuel oil.
For more information on specificfluid applications and high
temperature ratings, see
pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference Page
Reusable
Fit t ing 136
Socket Data 65
2583Double textile braid
SAE 100R3
M aximum M inimum M inimumOperat ing Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft
2583-4 6,4 0.25 14,5 0.57 87,0 1250 350,0 5000 76,2 3.00 0,18 0.12
2583-6 9,7 0.38 19,1 0.75 78,0 1125 315,0 4500 101,6 4.00 0,33 0.22
2583-8 12,7 0.50 23,9 0.94 70,0 1000 280,0 4000 127,0 5.00 0,39 0.26
2583-12 19,1 0.75 31,8 1.25 52,0 750 210,0 3000 152,4 6.00 0,71 0.48
2583-16 25,4 1.00 38,1 1.50 39,0 565 157,0 2250 203,2 8.00 0,76 0.51
2583-20 31,8 1.25 44,5 1.75 26,0 375 105,0 1500 254,0 10.00 1,09 0.73
ConstructionSynthetic rubber tube, double
textile braid reinforcement andsynthetic rubber cover.
Operating Temperature Range40C to +100C [40F to +212F].
A ir not to exceed +71C [+ 161F].
ApplicationFor hydraulics, fuel, lubricating
oils, gasoline, air and water. N otapproved for airbrake applica-tions. For more information on
specific fluid applications andhigh temperature ratings, see
pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference Page
Crimp
OTC 66
-
7/27/2019 Aeroquip Hose
28/47
38 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
2681HI-IMPULSE
Single wire braidMeets or exceeds:
SAE 100R1A, EN853 1ST, ISO 1436-1 Type 1ST
M aximum M inimum M inimumOperat ing Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft2681-3 4,8 0.19 12,7 0.50 280,0 4000 1120,0 16000 88,9 3.50 0,19 0.13
2681-4 6,4 0.25 15,8 0.62 227,0 3250 897,0 13000 100,0 4.00 0,28 0.19
2681-5 7,9 0.31 17,5 0.69 227,0 3250 897,0 13000 115,0 4.50 0,40 0.27
2681-6 9,7 0.38 19,8 0.78 210,0 3000 840,0 12000 125,0 5.00 0,45 0.30
2681-8 12,7 0.50 23,1 0.91 175,0 2500 700,0 10000 180,0 7.00 0,58 0.39
2681-10 16,0 0.63 26,2 1.03 140,0 2000 560,0 8000 200,0 8.00 0,68 0.46
2681-12 19,1 0.75 30,2 1.19 124,0 1800 497,0 7200 240,0 9.50 0,79 0.53
2681-16 25,4 1.00 38,1 1.50 90,0 1300 359,0 5200 300,0 12.00 1,19 0.80
2681-20 31,8 1.25 46,0 1.81 60,0 900 248,0 3600 420,0 16.50 1,46 0.98
2681-24 38,1 1.50 52,3 2.06 49,0 700 193,0 2800 500,0 20.00 1,67 1.12
2681-32 50,8 2.00 65,5 2.58 42,0 600 168,0 2400 630,0 25.00 2,43 1.63
Construction
Synthetic rubber tube, singlewire braid reinforcement and
synthetic rubber cover.
Operating Temperature Range40C to +100C [40F to +212F]
Application
Hydraulic system service withpetroleum and water-base fluids,
for general industrial service. Formore information on specific fluid
applications and high tempera-ture ratings, see pages 349-355.
For Complete Agency Listings
See pages 346-348.
r
Fitting Reference Page
CrimpSkive Nipple 66
Socket Data 64
-
7/27/2019 Aeroquip Hose
29/47
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
GH663MATCHMATE PlusHI-IMPULSESingle wire braidMeets or exceeds:
SAE 100R1AT Type S, EN853 1SN, ISO 1436-1 Type 1SN
M aximum M inimum M inimum
Operat ing Burst Bend WeightPart Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft
227,0 3250 897,0 13000GH663-4 6,4 0.25 13,5 0.53 192,0 2750 770,0 11000 100,0 4.00 0,24 0.16
210,0 3000 840,0 12000GH663-6 9,7 0.38 17,5 0.69 157,0 2250 630,0 9000 125,0 5.00 0,37 0.25
175,0 2500 700,0 10000GH663-8 12,7 0.50 20,6 0.81 140,0 2000 560,0 8000 180,0 7.00 0,45 0.30
124,0 1800 497,0 7200GH663-12 19,1 0.75 27,7 1.09 87,0 1250 350,0 5000 241,3 9.50 0,67 0.45
90,0 1300 359,0 5200GH663-16 25,4 1.00 35,8 1.41 70,0 1000 280,0 4000 304,8 12.00 1,01 0.68
GH663-20 31,8 1.25 43,4 1.71 66,0 950 260,0 3770 419,1 16.50 1,31 0.88
GH663-24 38,1 1.50 50,6 1.99 50,0 725 200,0 2900 508,0 20.00 1,56 1.05
GH663-32 50,8 2.00 64,0 2.52 40,0 580 160,0 2320 635,0 25.00 1,95 1.31
ConstructionSynthetic rubber tube, singlewire braid reinforcement and
synthetic rubber cover.
Operating Temperature Range40C to +100C [40F to +212F]
ApplicationHydraulic system service withpetroleum and water-base fluids,
for general industrial service. Formore information on specific fluid
applications and high tem peratureratings, see pages 349-355.
Im proved performance when usedwith G lobal Crim p fittings.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference Page
Crimp
TTC 66
Skive Nipple 66
Socket Data 64
Reusable
Fit t ing 148
Socket Data 65
GH194 AQP
MATCHMATE BLUEHI-IMPULSESingle wire braidMeets or exceeds:
SAE 100R1AT Type S, EN853 1SN, ISO 1436-1 Type 1SN
M aximum M inimum M inimumOperat ing Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft
GH194-4 6,4 0.25 13,5 0.53 227,0 3250 897,0 13000 100,0 4.00 0,25 0.17
GH194-6 9,7 0.38 17,5 0.69 210,0 3000 840,0 12000 125,0 5.00 0,37 0.25
GH194-8 12,7 0.50 20,6 0.81 175,0 2500 700,0 10000 180,0 7.00 0,45 0.30
GH194-10 16,0 0.63 23,9 0.94 140,0 2000 560,0 8000 205,0 8.00 0,54 0.36
GH194-12 19,1 0.75 27,7 1.09 124,0 1800 497,0 7200 240,0 9.50 0,68 0.46
GH194-16 25,4 1.00 35,8 1.41 90,0 1300 359,0 5200 300,0 12.00 0,98 0.66
GH194-20 31,8 1.25 43,9 1.73 62,0 900 248,0 3600 420,0 16.50 1,26 0.85
ConstructionAQ P elastomer tube, single wirebraid reinforcement and blue
AQ P elastomer cover.
Operating Temperature Range40C to + 150C [40F to + 300F].
ApplicationPetroleum and fire-resistanthydraulic fluids, fuel and lubricat-
ing oils, gasoline, water andother industrial fluid