ahmed farag 2015

7
Ahmed Farag Mohamed Saber 58- Al Medina St. – Kafer El Zayat Gharbia – Egypt Mob: +974-74754781 (Qatar) +2-01004060995 – Tel: +2-0402548921 (Egypt) E. Mail: [email protected] [email protected] Career Objective Obtain a position within the Civil engineering field where my experience as infrastructure Design Engineer will make a positive contribution to a company’s goal. Career Achievements More than 12 years of experience in engineering as infrastructure design Engineer which include but not limited to the following:- Significant proficiency in the design of gravity and pressure mains covering potable water, foul water, irrigation/fire and storm water trunk mains and distribution systems including pump stations and ideally treatment plants. Manage projects from inception to completion whilst interfacing and coordinating with other infrastructure discipline engineers and building engineering services engineers. Significant experience in wet utilities planning and design activities throughout the master plan, concept, preliminary and final design stages inclusive of potable water, sanitary, Strom ,irrigation, telephone and electrical networks. Understanding regional roads & utility design criteria and ability to effectively liaise with relevant statutory authorities and stakeholders at various stages of design to ensure compliance of the design with the prevalent regulations. Proven experience of design and tender process required including full comprehension of regional design codes, specifications, contractual terms and conditions along with assistance in preparation of bids and pre-qualification materials. Proven ability in the supervision and management of a team with regard to all aspects of utilities; concept, preliminary and final design stages. Responsible for quality control and maintaining quality standards in all works produced by the section, checking computations and/or reviewing design and drawings performed by others. Knowledge of regional design codes and specification including storm drainage design, pavement design, signage, road markings, utility ROW and protection works. Sound Knowledge of design software such as Autodesk Civil 3D, MX Roads software, traffic analysis software, WaterCAD, SewerCAD and Ahmed Farag Page 1

Upload: ahmed-farag

Post on 13-Jan-2017

92 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: ahmed farag 2015

Ahmed Farag Mohamed Saber58- Al Medina St. – Kafer El Zayat Gharbia – EgyptMob: +974-74754781 (Qatar) +2-01004060995 – Tel: +2-0402548921 (Egypt)E. Mail: [email protected] [email protected]

Career ObjectiveObtain a position within the Civil engineering field where my experience as infrastructure Design Engineer will make a positive contribution to a company’s goal.

Career AchievementsMore than 12 years of experience in engineering as infrastructure design Engineer which include but not limited to the following:-

Significant proficiency in the design of gravity and pressure mains covering potable water, foul water, irrigation/fire and storm water trunk mains and distribution systems including pump stations and ideally treatment plants.

Manage projects from inception to completion whilst interfacing and coordinating with other infrastructure discipline engineers and building engineering services engineers.

Significant experience in wet utilities planning and design activities throughout the master plan, concept, preliminary and final design stages inclusive of potable water, sanitary, Strom ,irrigation, telephone and electrical networks.

Understanding regional roads & utility design criteria and ability to effectively liaise with relevant statutory authorities and stakeholders at various stages of design to ensure compliance of the design with the prevalent regulations.

Proven experience of design and tender process required including full comprehension of regional design codes, specifications, contractual terms and conditions along with assistance in preparation of bids and pre-qualification materials.

Proven ability in the supervision and management of a team with regard to all aspects of utilities; concept, preliminary and final design stages.

Responsible for quality control and maintaining quality standards in all works produced by the section, checking computations and/or reviewing design and drawings performed by others.

Knowledge of regional design codes and specification including storm drainage design, pavement design, signage, road markings, utility ROW and protection works.

Sound Knowledge of design software such as Autodesk Civil 3D, MX Roads software, traffic analysis software, WaterCAD, SewerCAD and StormCAD is required and familiarity with sustainable design techniques will be an added advantage.

Leads the Infrastructure Design projects teams to develop design solutions in a timely and cost-effective manner whilst complying with the requirements of the stakeholders.

Attends the project related Meetings/Workshops/Presentations before the Clients/Developers/Government Agencies, as and when required.

Confers with GM- Pre Contract Services and Contracts & Planning of the Company regularly for honoring the schedule of deliverable submissions.

Assists the Senior Management to respond to RFP (Requests for Proposal) from the Clients as and when required.

Prepares a detailed list of project deliverables and requirement of resources at Consultancy Services Proposal/Tender Stage and upon award of the projects.

Demonstrates leadership, mentoring and team building skills in order to motivate Subordinates to put their best efforts and output.

Monitors Sub-ordinates’ work output in terms of quality standards and timeliness of delivery and takes adequate measures to rectify any sub-standard outputs.

Ahmed Farag Page 1

Page 2: ahmed farag 2015

Responds to RFI (Requests for Information) from the contractors at construction tender stage.

Examines and approves/disapproves the material samples and other submittals with respect to the standard specifications before presenting it to the Client.

Career summary

JULY 2013 – PRESENT ARAB ENGINEERING BUREAU – QATAR (Doha). Sr. Infrastructure design engineer

Preparation of concept, preliminary and detailed designs together with Tender and Contract documents for all wet infrastructure utilities including (storm drainage systems - water supply - industrial drainage –foul water - fire -irrigation-roads).

Coordinating all the utilities work such as storm drainage, foul sewerage, water supply, street lighting, electrical, communication, etc. with all engineering disciplines in the office and with clients.

Provide engineering inputs and solutions during all phases of design development and project implementation

Perform design/analyses calculations related to wet utilities such as irrigation, stormwater and subsurface drainage networks using governing engineering formulas, skills, and experience.

Detailed design for underground structures from Conceptual phase through Final approval.

Attends the project related Meetings/Workshops/Presentations before the Clients/Developers/Government Agencies, as and when required.

Responds to RFI (Requests for Information) from the contractors at construction tender stage.

Projects involved Internal security force (ISF) camp- LEKHWEYA.

Barwa village expansion development (WAKRA).

Tram System Integration - Msheireb Downtown Doha (MDD).

Madinat Mawater – BARWA.

March 2011 – JUNE 2013 RADICON-GULF CONSULT – SAUDI ARABIA (Al-Khobar). Infrastructure Design Engineer / project Engineer

Detailed design and preparation of site development plans Conceptual and detailed design for all wet infrastructure utilities including (storm drainage

systems - water supply - industrial drainage -sanitary drainage- fire fighting-irrigation-roads-wastewater treatment plant- pump stations, etc).

Provide engineering inputs and solutions during all phases of design development and project implementation

Detailed design and drafting for underground structures from Conceptual phase through Final approval.

Coordinate the design of the roads and site grading and preparation of the bill of quantities, cost estimates and technical specifications.

Detailed design and drafting for all boundary fencing types. Detailed design for all Plumbing works systems ( water supply , sanitary drainage) prepare Bills of quantities, specifications, cost estimation, method of measurement,

catalogue cuts as well as support during construction , taking off quantities, detailed priced/un-priced Bills Of quantities, Cost Estimation, etc,.

Projects involved

Ahmed Farag Page 2

Page 3: ahmed farag 2015

King Fahd cardiac centre & ICU centre for king Saudi university.

Distribution centre & other facilities (Modern Industries Company (MIC).

Yanbu export refinery project (YERP).

Detailed design services for air separation plant project at Qurrayah (civil works), Air Liquid Engineering Middle East.

RAS AL-KHAIR INDUSTRIAL CITY (RIC) feed services (RC, contract No.027-T01),Atkins association

Multi-storey parking building (Saudi Electricity Company).

Detailed engineering design for residential and services compound (RC, contact No. 082 – C01).

Provision of inlet works at IWTP- 8 for Jubail- 2 industrial waste water.

Gulf packaging industries new expansion project at Jubail-2.

Engineering and design services for ROC project – Rabigh, Sankyu INC.

Detail design and engineering services for R-PTC project - Rabigh, Sankyu INC.

Production line building for line-4 plant at petro Rabigh, Saudi German Company .

Preparation of EPC of Mardumah 115/13.8kv substation 20bd - RC contract no. 068-T09 (task-15), RGCK association.

Preparation of EPC Bid Package for Contract No. 071- C020 115/13.8kV Substation at Jubail Commercial Port (JCP), RGCK association .

EPC of expansion (KSIP) port substation 15BC task-16 contract No. 071- C16, RGCK association. .

Technical study for transfer the 3-way sewage treatment water for irrigation at Dammam area - Dammam municipality.

E/D for extension of existing workshop/office for Baker Hughes in Dhahran, Arcon.

Walek Kiln Eaf (Electric arc furnace) dust recycling plant - Al-Manar Arabian Corporation.

December 2009-Februry 2011ABDULLAH AL-SUWAILEM & PARTENER – SAUDI ARABIA (Dammam).Technical support Infrastructure Engineer - General Directorate of Water in the Eastern Province Ministry of Water and Electricity (Saudi Arabia).

Supervision on construction of the sewage lines for diameters starting from 300 mm to 1600 mm.

Supervision on construction forcemain lines for 700 mm diameter and 3.5 km long from lifting station no. 2 to lifting station no. 1.

Supervision on construction forcemain lines for 1000 mm diameter and 7 km long from lifting station No. 1 to the treatment plant.

Supervision on implementation of the main pumping station No. 1 and the pumping station No. 2.

Supervision on construction of two forcemain lines for 1200 mm diameter each have a length of 11 km, and from inside the treatment plant in Dammam to even the current site downstream.

Supervision on construction of the pumping station within the proposed site treatment plant in Dammam.

Projects involved

Ahmed Farag Page 3

Page 4: ahmed farag 2015

Sewage networks and pumping stations for the west of Dammam schemes - the first phase (project value 146000000 SR.).

Implementation of marine surplus lines and pumping stations for the proposed treatment plants in Dammam and Khobar (project value 145 500 000 S.R).

December 2008-December 2009ZUHAIR FAYEZ PARTNERSHIP – SAUDI ARABIA (Dammam).Technical Infrastructure Engineer - Municipality Of Dammam – Development and Project Directorate (Saudi Arabia).

Study of strategy to reduce ground water level and storm water and designing storm water drainage network.

Study all problems of storm water drainage networks and solving it. Planning and design of storm water drainage networks pump station and force mains of

some zones. Preparation of the execution documents of the storm water drainage networks and

pumping stations for 4th stage and the 5th stage of Dammam and Khobar. Designed the storm water management system and managed/supervised a team of

designers and CAD operators in the accomplishment of the detailed engineering plans including storm water , force main and pump stations.

Projects involved Study of strategy to reduce subsurface water level and storm water drainage at the

eastern province cities (project value 3000000 SR.) .

August 2006 –December 2008SAUDCONSULTMISR – EGYPT (Cairo). Infrastructure Design Engineer / Project Engineer

Detailed design and preparation of site development and wet infrastructure works including (grading - storm drainage systems - water supply -water supply - industrial drainage -sanitary drainage- fire fighting-irrigation-roads-wastewater treatment plant- pump stations, etc).

Detailed design for all plumbing works including water supply and sanitary drainage Design gases networks inside and outside the buildings (medical, industrial, LPG,

Natural, compressed air, etc.). Detailed design and drafting for underground structures from Conceptual phase through

Final approval. Perform design/analyses calculations related to wet utilities such as irrigation, storm

drainage and subsurface drainage networks using governing engineering formulas, skills, and experience.

Prepare Bills of quantities, specifications, cost estimation, method of measurement, catalogue cuts as well as support during construction , taking off quantities, detailed priced/un-priced Bills Of quantities, Cost Estimation, etc,.

Projects involved Qassim University medical colleges (Project Value SR. 174.886.105).

Qassim University Hospital (Project Value SR. 500.000.000).

Saudi Basic Industries Corporations – Sabic (Project Value SR. 1800000)

American University - AUC New Campus at New Cairo City (Design being finalized)

AUC (Stage II):

Riyadh Courts Complex Mosque Extension (Project Value SR. 9.000.000)

The Royal Commission for Jubail & Yanbu

Residential Compound in Khobar (Project Value SR. 16.000.000)

King Faisal University Hospital (Project Value SR. 600,000,000)

Ahmed Farag Page 4

Page 5: ahmed farag 2015

Qassim conference centre (Project Value SR. 242,000000)

New Cairo – Emaar (Completion/ 2009) (Housing area – town ship, project value estimated L.E. 850,000,000).

February 2004 – August 2006URBAN STUDIES AND DESIGN CENTER – EGYPT (Mansoura). Civil Engineer / project Engineer.

Utilities structures (water storage tanks (underground & elevated), sewage lifting and pumping stations, and storm lifting station – storm drainage ponds & culverts).

Perform design/analyses calculations related to wet utilities such as irrigation, storm drainage and subsurface drainage networks using governing engineering formulas, skills, and experience.

Sanitary and structural design for waste water treatment plants and water treatment plants.

Infrastructure works (water supply system, sewerage and storm networks, surface drainage system, etc...) and solid waste disposal system.

Preparing bills of quantities for different projects using international codes and standards ,Preparing payment bills ,conditions of contracts and special specifications for projects according to specific requirements.

August 2003 – February 2004EL SHIMAA COMPANY – CAIRO Supervision Civil Engineer.

Supervision on construction of residential buildings.

Education and Certification Bachelor’s Degree in Civil Engineering – Very Good with Honour / Ranked (sixth) /

percentage (80.77%).Egypt - Mansoura University.

Primary Master's Degree in Sanitary Engineering – Excellent. Egypt - Mansoura University.

Computer SkillsExperience in civil programs

AutoCAD up to 2014 - Watercad – Sewercad – Stormcad – Epanet - MicrodrainageExperience in computer programs

Word - Excel - Power point - Outlook

Awards and membership of professional bodiesEgyptian syndicate of engineering –member from 2003.Saudi council of engineering –member from 2010.Qatar Ministry of Municipality & Urban Planning (MMUP) member up to 2017 .

Ahmed Farag Page 5