air cooled packaged air conditioners - daikin.com.sg cooled packaged_ie3.pdf · duct connection...
TRANSCRIPT
FLOOR STANDING TYPEDUCT TYPE
COOLING ONLY 50Hz
AIR COOLED PACKAGEDAIR CONDITIONERS
Suitable for
factories
PCTPSG1812Aaprv
All rights reservedAK
c
Specifications, designs and other content appearing in this brochure are current as of September 2018 but subject to change without notice.
1. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced.2. If the outdoor unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided. If you need to install the outdoor unit close to the sea shore, contact your local distributor.
Cautions on product corrosion
Ask a qualified installer or contractor to install this product. Do not try to install the product yourself. Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.
Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or contractor to install those parts and accessories. Use of unauthorised parts and accessories or improper installation of parts and accessories can result in water or refrigerant leakage, electrical shock, fire or explosion.
Read the user's manual carefully before using this product. The user's manual provides important safety instructions and warnings. Be sure to follow these instructions and warnings.
If you have any enquiries, please contact your local importer, distributor and/or retailer.
IE3 MOTOR VERSION
DUCT CONNECTION TYPEDIRECT AIR BLOW TYPEFVPGR10-20NY1G (IE3 Motor)FVGR05-10NV1
DUCT TYPEFDR05-20NY1G (IE3 Motor)
FLOOR STANDING TYPE
DUCT CONNECTION TYPE
DUCT TYPEAir blow via connected ducts
Comfortable air conditioning of the entire factory by connecting a blow duct at the top of the indoor unit.
Note: Ducts to be procured locally.
Nice, cool air in the factory or in the cafeteria
HFC R-410A Line Upfor Factories and Offices
HFC R-410A Line Upfor Factories and Offices
Even when selecting air conditioners, a new model featuring R-410A could
be the perfect step in promoting your corporate image.
Even when selecting air conditioners, a new model featuring HFC R-410A
refrigerant could be the perfect step in promoting your corporate image.
We have entered an era in which being recognized as an environmentally
responsible corporate citizen has taken utmost importance.
We have entered an era in which being recognized as an environmentally
responsible corporate citizen has taken utmost importance.
Product Line Up
1 2
DIRECT AIR BLOW TYPE
Direct air blow from indoor unit with plenum
Comfortable factory air conditioning using multiple indoor units installed in accordance with the space. Installation is next to walls, so units will not affect the factory layout even if the changes are made.
FLOOR STANDING TYPE Cooling only
Cooling only
50Hz
50,000
14.760,000
17.6100,000
29.380,000
23.5160,000
46.9120,000
35.2180,000
52.8200,000
12,600 15,100 25,20020,200 40,30030,200 45,400 50,400
58.65 10 13 1886 15 20
kWCapacity 1, 2
Btu/hkcal/h
RUR10NY1RUR08NY1RUR05NY1 RUR06NY1
RUR10NY1 RUR13NY1 RUR15NY1 RUR18NY1 RUR20NY1
HP
Outdoor unit
Indoor unit
Outdoor unit
Indoor unit
OUTDOOR UNIT
1Rated cooling capacities are based on the following conditions: Return air temp., 27°CDB, 19.5°CWB; outdoor temp. 35°CDB. Equiv. refrigeration piping, 5 m (horizontal). 2Capacity includes indoor fan motor heat.
Note :
Dimensions Page 14,15
DUCT TYPE 50Hz
50,000
14.760,000
17.6100,000
29.3120,000
35.2180,000
52.880,000
23.5160,000
46.9200,000
58.65 10 13 1886 15 20
kWCapacity 1, 2
Btu/hkcal/h
DUCT TYPE
RUR10NY1 RUR13NY1 RUR15NY1 RUR18NY1 RUR20NY1RUR08NY1RUR05NY1 RUR06NY1
HP
Outdoor unit
Indoor unit
OUTDOOR UNIT
Specifications Page 6Dimensions Page 12,13
Dimensions Page 14,15
12,600 15,100 25,20020,200 40,30030,200 45,400 50,400
FVGR08NV1FVGR05NV1 FVGR06NV1
FDR10NY1G FDR13NY1G FDR15NY1G FDR18NY1G FDR20NY1GFDR08NY1GFDR05NY1G FDR06NY1G
FVGR10NV1
FVPGR10NY1G FVPGR13NY1G FVPGR15NY1G FVPGR18NY1G FVPGR20NY1G
DIRECT AIR BLOW TYPE
DUCT CONNECTION TYPE
FLO
OR
STA
ND
ING
TY
PE
Specifications Page 5Dimensions Page 10
Specifications Page 5Dimensions Page 11
3 4
DurabilityHeat exchange fins provided with anti-corrosion treatmentTo achieve increased durability by improved resistance to salt corrosion and atmospheric pollution, coated PE fins (with special acryl pretreatment) are used for the heat exchanger of the outdoor unit.
(Applies to all outdoor units)
(Applies to RUR05N/06N)
AIR COOLED PACKAGED AIR CONDITIONERS
Previous 20HP outdoor unit
Installation space is saved thanks to a more compact outdoor unit. This also makes it easier to install.
Space savings
RUG10AUY1 X 2RUR20NY1
(20HP)
2,560mm690mm
1,240mm765mm
space savedcompared to
previous model
53%
Refrigerant pre charged for up to 7.5 metres
Design flexibilityDesigned for long refrigerant piping. 50 m maximum length and 30 m maximum level difference to cover medium- and large-scale building needs.
Outdoor unit roof installation possible for plenty of leeway.
Allowable refrigerant pipe length and level difference
Max. leveldifference
Pre-charged 1 Max. length
30 m7.5 m 50 m(Equivalent length 70 m)
Note: 1Additional refrigerant charging is required if the refrigerant pipe is longer than the indicated length.
4-direction piping affords more freedom of layoutPiping can be run from the front, bottom, right or rear surface according to how the unit is installed.
In case of RUR08–20N, piping can be drawn out in two directions-front, and under side.
Max. length
Max. level difference
RUR05NY1-20NY1
Easy operationDigital remote control comes standard with indoor unit.
Enhanced varieties of factory modification and optional accesories
Standard model
Factory modification
Auto restart
Floor Standing Type
Fac
tory
Mod
ifica
ion
DuctConnection
Type
Duct Type
–
–
Modify wiring for central control adapter kit (DTA107A55) installation
Discharge grill plenum chamber
Side discharge grillon discharge plenum chamber
–
–
–
–
–
–
–
–
Front suction high efficiency filter chamber
Suction grill for front suction high efficiency filter chamber
Front suction base flange for front suction high efficiency filter chamber
Rear suction
Drain pump
Remote sensor(Thermistor for suction air)
Central control adaptor kit (external terminal for ON/OFF , abnormal)1 DTA107A55
Opt
ion
–
BRC1C62LCD remote controller2
DCS601C51intelligent Touch Controller2
DCS302CA61Central remote controller2
DCS301B61Unified ON/OFF controller3
DST301BA61Schedule timer3
KRCS01-1BRemote sensor (thermistor for suction air)3
BRC1NU64Remote controller
Note: 1Wiring modification is needed on floor stand model to connect with central control ADP kit.2Need to use central control adapter kit for option connection.3Central control adapter kit and LCD remote controller is necessary for option connection.
Equipped with scroll compressor for quiet operation
Smooth running, low vibration, low operating sound.
Quiet Operation
Outdoor unitSound level
59 dB
380V 415V
RUR05NY1
59 dB
60 dB
60 dBRUR06NY1
Reliability, long life and premium efficiency motor
Reduce energy consumption, CO2 emissions and the impact of industrial operations on the environment.
For FVPGR10-20NY1GFDR5-20NY1G
IE3 Fan Motor
Temperature setting is possible by button operation. The set temperature is conveniently displayed on the LED.
1453
6789
210
1
2
3
5
6
7
89
Note.1
Note.1
4
1 Power
3 Temperature setting
2 Temperature scale
4 Mode setting
5 Next setting
6 Fan indicator lamp
7 Cool indicator lamp
9 Compressor 1 indicator lamp
10 Temperature sensor
8 Compressor 2 indicator lamp
1 On/Off button
3 Temp. setting up
2 Fan button
4 Temp. setting down
5 Mode button
6 LED display
7 Compressor operation lamp.
8 Fan operation lamp.
9 Cool operation lamp.
Note.1 It cannot be used for FVPGR10–20NY1G
(Standard accessory)Floor standing type
(optional accessory)Duct type
DUCT CONNECTION TYPE
FLOOR STANDING TYPEDIRECT AIR BLOW TYPE
DUCT TYPE
RUR10NY1FDR10NY1G
RUR10NY1FVGR10NV1
RUR10NY1FVPGR10NY1G
Direct Air Blow
RUR05NY1
14.750,000
17.6 23.5
RUR06NY1 RUR08NY1
461,620
541,910
682,400
450X900X85074 81 97
Belt drive9
RUR10NY1
29.360,000 80,000 100,000
12,600 15,100 20,200 25,200
782,750
500X1,330X850108
450X1,130X850 500X1,130X850
92 105 203
2.5 (Charged for 7.5 m) 3.5 (Charged for 7.5 m) 4.5 (Charged for 7.5 m)
Hermetically sealed scroll type
206
6.0 (Charged for 7.5 m)
1,345X900X320 1,680X930X765
4.5 4.5 6.7 9.0
FDR05NY1G FDR06NY1G FDR08NY1G FDR10NY1G
Belt drive
Hermetically sealed scroll type
35.2 46.9
RUR13NY1 RUR15NY1
1364,800
625X1,620X850169
RUR18NY1
52.8 58.6
RUR20NY1
1665,860
625X1,980X850196
120,000 160,000 180,000 200,00030,200 40,300 45,400 50,400
243 319
4.5 (Charged for 7.5 m) 8.0 (Charged for 7.5 m)
322 3291,680X1,240X765
5.0+5.0 6.7+6.7 7.5+7.5 9.0+9.0
FDR13NY1G FDR15NY1G FDR18NY1G FDR20NY1G
Note : 1Rated cooling capacities are based on the following conditions : Return air temp., 27°CDB, 19.5°CWB; outdoor temp. 35°CDB. Equiv. refrigeration piping, 5 m (horizontal). 2Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions.3Capacity includes indoor fan motor heat.
lvory White
Ivory white Hermetically sealed scroll type
9.0
29.3100,000
802,830
1,740X1,170X510155
6.0 (Charged for 7.5 m)
46.9160,000
4,240120
208
Cooling capacity 1, 3 kWBtu/hkcal/h
Indoorunit
Sound level 2 dBAExt. Static Pressure mmH2O 15
Belt DriveDrive
Refrigerant charge (R-410A) kg
Machine weight kgOperation range °CWB
Air flow rate (H) m3/mincfm
Outdoorunit
Colour
Dimensions (HXWXD)
Colour
mm
Power supply 380–415 V, 50 Hz, 3 Phase, 4 Wires
kWMotor outputCompressor Type
10HP
RUR10NY1
15HP
RUR15NY1ModelName
Indoor unitOutdoor unit
Fan
5 6
POLYOL ESTER3.3 5.0
13HP
RUR13NY1
LChargeRefrigerantoil
Model
5.5 6.4 8.9 11.3kW
14.8 17.7 21.2 24.8
Starting currentPower factor
9.25 10.76 15.16 19.2Running current A
86.2 86.2 85.1 85.3%70.0 78.2 115.5 129.5A
kW
Starting currentPower factor
Running current A
%A
25.15 29.97 36.0 42.0
85.3 85.6 85.3 85.5118.0 130.3 143.4 146.3Starting current
Power factor
Running current A
30,200
35.2120,000
1,870X1,170X720
4.5 (Charged for 7.5 m)
11.3 17.6
61 62 63 6362
19.2 30.024.9
% 85.3 85.185.4A 129.5 130.3118.0
6.58.0 (Charged for 7.5 m)
FVPGR10NY1G FVPGR15NY1GFVPGR13NY1G
5.0+5.0 6.7+6.7
Sound level 2 dBA 61 6262380V
14 to 25
DUCT CONNECTION TYPE
FLOOR STANDING TYPE
25,200 40,300kWPower consumption 1 14.7
50,400
58.6200,000
5,720162
259
RUR20NY1
20HP18HP
RUR18NY1
45,400
52.8180,000
41.635.8
85.385.0146.3143.4
1,870X1,470X720
FVPGR20NY1G FVPGR18NY1G
7.5+7.5 9.0+9.0
63 63
24.521.0
DUCT TYPE
Cooling capacity 1, 3 kWBtu/hkcal/h
°CDB
°CWBOperation range
ModelName
Indoor unitOutdoor unit
Dimensions (HXWXD) mmSound level (H) 2 dB(A)
Refrigerant charge (R-410A) kg
Dimensions (HXWXD) mmMachine weight kg
Piping connections
mmmm
mm
kg
Airflow rate (H)
Fan External static pressureDriving system
m3/mincfm
mmH2O
Outdoorunit
mm
Operation range
Max. interunit piping length mm
Machine weight
Indoorunit
Colour
Max. installation level difference
Colour
Power supply
kWMotor outputCompressor Type
Galvanized steel
Ivory white
3050 (equivalent length 70 m)
380–415 V, 50 Hz, 3 Phase, 4 Wires
13HP 15HP 18HP 20HP
o/ 12.7(Brazing) o/ 15.9(Brazing)o/ 28.6(Brazing)
o/ 12.7(Flare)o/ 28.6(Brazing)
o/ 34.9(Brazing)
o/ 15.9(Flare)o/ 34.9(Brazing)
5HP 6HP 8HP 10HP
Cooling capacity 1, 3 kWBtu/hkcal/h
Power consumption 1
Power consumption 1
°CDB
°CWBOperation range
ModelName
Indoor unitOutdoor unit
Dimensions (HXWXD) mmSound level (H) 2 dB(A)
Refrigerant charge (R-410A) kg
Dimensions (HXWXD) mmMachine weight kg
Piping connections
mmLiquidmmGas
LiquidGas
mm
Indoor unit
Outdoor unit
LiquidGas
LiquidGas
Indoor unit
Outdoor unit
kg
Airflow rate (H)
Fan External static pressureDriving system
m3/mincfm
mmH2O
Outdoorunit
mm
Operation range
Max. interunit piping length mm
Machine weight
Indoorunit
Colour
Max. installation level difference
Colour
Power supply
kWMotor outputCompressor Type
Ivory white
3050 (equivalent length 70 m)
380–415 V, 50 Hz, 3 Phase, 4 Wires
o/ 9.5(Flare)
o/ 9.5(Brazing) o/ 12.7(Brazing)o/ 19.1(Brazing) o/ 22.2(Brazing) o/ 28.6(Brazing)
o/ 12.7(Flare)o/ 22.2(Brazing) o/ 28.6(Brazing)o/ 19.1(Flare)
Note : 1Rated cooling capacities are based on the following conditions : Suction temp., 27°CDB, 19.5°CWB ; outdoor temp. 35°CDB. Equiv. refrigeration piping, 5 m (horizontal). 2Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions.3Capacity includes indoor fan motor heat.
Galvanized steel
Sound level 2 dBA 59 60 6159dBA
L380V415V 60 61 6260
Sound level 2 dBAL
61 63 63625.0 6.5 6.56.5
6058
dBA380V415V 62 64 6463
mm ----------o/ 26.0 (Hole) Drain
mmDrain
mm PS 1B Internal threadDrain
mm ----------Drain
RefrigerantPiping
mmIndoor unit mm
Outdoor unit
mmLiquid Gas
Liquid Gas
mm
mmmm
1,680X930X765206 243 319
1,680X1,240X765
3050 (equivalent length 70 m)
Dimensions (HXWXD) mmMachine weight kgOperation range °CDB
Max. installation level differenceMax. interunit piping length m
m
o/ 12.7 (Brazing)o/ 28.6 (Brazing)
o/ 12.7 (Flare)o/ 28.6 (Brazing)
PS 1B Internal thread
----------
o/ 15.9 (Brazing)o/ 34.9 (Brazing)
o/ 15.9 (Flare)o/ 34.9 (Brazing)
21 to 46322 329
Drain
Drain
DAPHNE FVC68D1.4 1.8
POLYOL ESTERCharge
Refrigerantoil
Model3.3 3.3
49 51 53
POLYOL ESTERCharge
Refrigerantoil
Model
14 to 25
10
21 to 46
14 to 25
15
21 to 46
PS 3/4B Internal thread
lvory White
14 to 25Ivory white
Hermetically sealed scroll type4.5
RUR10NY1
5HP
12,600
14.7
RUR05NY1
50,000
421,480
421,480
1,870X750X51090 90
2.5 (Charged for 7.5 m)
8HP
20,200
23.5
RUR08NY1
80,000
1,91054
1,870X950X510107
4.5 (Charged for 7.5 m)
10HP
25,200
29.3100,000
2,830
59/54/50 59/54/50 60/56/51 61/57/52
80
1,870X1,170X510143
6.0 (Charged for 7.5 m)
Cooling capacity 1, 3 kWBtu/hkcal/h
kWPower consumption 1
ModelName
Indoorunit
Indoor unitOutdoor unit
Sound level (H/M/L) 2 dBADirect Drive 3 SpeedDrive
Refrigerant charge (R-410A) kgSound level 2 dBA
Machine weight kgOperation range °CWB
Air flow rate (H) m3/mincfm
Outdoorunit
Colour
Dimensions (HXWXD)
Colour
mm
Power supply 380–415 V, 50 Hz, 3 Phase, 4 Wires
kWMotor outputCompressor Type
POLYOL ESTERDAPHNE FVC68D1.4 1.8 3.3LCharge
Refrigerantoil
Model
Fan
6HP
RUR06NY1
15,1005.5 8.6 11.26.4
Starting currentPower factor
17.660,000
1,870X750X510
9.0 10.5 14.0 18.2Running current A72.7 80.9 118.2 135.0A88.0 87.8 88.4 88.3%
3.5 (Charged for 7.5 m)59 60 6159380V
FVGR05NV1 FVGR08NV1 FVGR10NV1FVGR06NV1
4.5 6.7 9.0
DIRECT AIR BLOW TYPE
21 to 46
1,345X900X32092 105 203 206
1,680X930X765
3050 (equivalent length 70 m)
Dimensions (HXWXD) mmMachine weight kgOperation range °CDB
RefrigerantPiping
mmIndoor unit
Max. installation level difference
mm
Outdoor unit
mmLiquid Gas
Liquid Gas
mmMax. interunit piping length m
m
o/ 9.5 (Brazing)o/ 19.1 (Brazing)
o/ 9.5 (Flare)o/ 19.1 (Flare)
o/ 12.7 (Brazing)o/ 22.2 (Brazing) o/ 28.6 (Brazing)
o/ 12.7 (Flare)o/ 22.2 (Brazing) o/ 28.6 (Brazing)
mmmm
PS 1B Internal thread
----------o/ 26.0 (Hole)
Drain
Drain
7 8
FVPGR10NY1G FVPGR13NY1GFVPGR15NY1G
Upper limit of ESP(standard ESP)
UPPER : FAN PULLEYLOWER : MOTOR PULLEY
UPPER : FAN PULLEYLOWER : MOTOR PULLEY
Upper limit of ESP(standard ESP)
Ext
erna
l sta
tic p
ress
ure
35
30
25
20
15
10
5
0
1400rpm1214rpm
1100rpm
1000rpm
900rpm
1300rpm
1200rpm
800rpm
1181rpm
1100rpm
1000rpm
900rpm
800rpm
900rpm
1000rpm
350
300
250
200
150
100
50
0
50500
450
400
350
300
250
200
150
100
50
0
45
40
35
30
25
20
15
10
5
0
68
138 142 146 150 154 158 162 166 170 174 179
70 72 74 76 78 80 82 84 86 88 90 92 94 96
1A-PD1571A-PD150
1A-PD1571A-PD140
1B-PD1801B-PD145
1B-PD1801B-PD138
1B-PD1801B-PD132
1B-PD1801B-PD125
1B-PD1801B-PD118
1A-PD1571A-PD132
1A-PD1571A-PD125
1A-PD1571A-PD117
1A-PD1571A-PD112
1A-PD1571A-PD109
2B-PD2142B-PD160
2B-PD2142B-PD155
2B-PD2142B-PD150
2B-PD2142B-PD134
2B-PD2142B-PD125
2B-PD2142B-PD118
1A-PD1571A-PD95
1A-PD1571A-PD85
FVPGR18NY1GFVPGR20NY1G
DUCT CONNECTION TYPEFLOOR STANDING TYPE DUCT TYPE
75 81
A125-24
1300rpm
1100rpm
79 82
A150-24
1000rpm
35350
1400rpm
900rpm
A132-24
1200rpm
A116-24
73
100
7463
250
150
65
300
67
30
25
5
20
15
10
06961
0
50
200
71
A160-24
A112-24
A106-24
A140-24
90
900rpm
A106-24 A112-24
35
1200rpm
A140-24
86
A116-24
88
A132-24
A150-24
1000rpm
92 94
1100rpm
1300rpm
350
A125-24
20
10
30
15
25
5
0 07876
50
100
8074
200
84
150
72
250
82
300
70
2B-180-28
2B-180-28
350
2B-160-28
199196
1200rpm
186
1000rpm
1100rpm
2B-186-28
300
200
150
162
250
170
10010
0
20
15
5
25
30
174154
50
0158 166150 178164
800rpm
900rpm
2B-167-28
182
35
190
2B-225-30
2B-250-30
2B-250-30
2B-250-30
2B-250-30
A90-19
A98-19
A118-19
A106-19
51
A112-19
1000rpm
800rpm
55
900rpm
63
1200rpm
59
1100rpm
150
250
100
57
50
610
20
0
25
5
10
15
5349
200
64
A95-19
3D117525A
3D117527A
3D117526A
25
20
5
15
0
10
A112-19
A125-19
A106-19
800rpm
51
250
52
1100rpm
900rpm
43
100
A95-19
54440
46 48
50
50
200
45
1000rpm
49
1200rpm
4742
A118-19
53 55
150
41
A98-19
A90-19
1391350
150
151127
20
0
10
30
25
15
5
123
50
200
131
250
100
147143
300
155
B200-28
B170-28
350
B160-28
163159
35
B186-28
B224-28
B177-28
FDR08NY1G FDR10NY1G
FDR13NY1GFDR15NY1G
FDR18NY1GFDR20NY1G
FDR05NY1G FDR06NY1G
Fan Performance
SDR4150061
SDR4150063
SDR4150062
(mmH2O) (Pa)
Air flow (m³/min)
Upper limit of ESP(standard ESP)
UPPER : FAN PULLEYLOWER : MOTOR PULLEY
Ext
erna
l sta
tic p
ress
ure
(mmH2O) (Pa)
Air flow (m³/min)
Air flow (m³/min)
Air flow (m³/min)
Ext
erna
l sta
tic p
ress
ure
Ext
erna
l sta
tic p
ress
ure
35
30
25
20
15
10
5
0
350
300
250
200
150
100
50
0102 105 108 111 114 117 120 123 126 129
(mmH2O) (Pa)
(mmH2O) (Pa)
1181rpm
1100rpm
1000rpm
900rpm
800rpm
50500
450
400
350
300
250
200
150
100
50
0
45
40
35
30
25
20
15
10
5
0138 142 146 150 154 158 162 166 170 174 179
2B-PD2142B-PD160
2B-PD2142B-PD155
2B-PD2142B-PD150
2B-PD2142B-PD134
2B-PD2142B-PD125
2B-PD2142B-PD118
Upper limit of ESP(standard ESP)
2 ) ( )
Air flow (m³/min)³
Upper limit of ESP(standard ESP)
Air flow (m³/min) Air flow (m³/min)
Ext
erna
l sta
tic p
ress
ure
Ext
erna
l sta
tic p
ress
ure
(mmH2O) (Pa)(mmH2O) (Pa)
Upper limit of ESP(standard ESP)
Air flow (m³/min)
Ext
erna
l sta
tic p
ress
ure
Air flow (m³/min)
Ext
erna
l sta
tic p
ress
ure
(mmH2O) (Pa) (mmH2O) (Pa)
Upper limit of ESP(standard ESP)
Upper limit of ESP(standard ESP)
Upper limit of ESP(standard ESP)
Air flow (m³/min)
Ext
erna
l sta
tic p
ress
ure
(mmH2O) (Pa)
Upper limit of ESP(standard ESP)
1200rpm
1000rpm
800rpm
1100rpm
900rpm
5
0
5
5
0
A112-1
A125-19
A106-1
800rpm
51
250
52
1100rpm
900rpm
43
100
A95-19
54440
46 48
50
50
200
45
1000rpm
49
1200rpm
4742
A118-1
53 55
150
41
A98-19
A90-19
H2O) (Pa)
Upper limit of ESP(standard ESP)
A90-19
A98-19
A118-1
A106-1
51
A112-1
1000rpm
800rpm
55
900rpm
63
1200rpm
59
1100rpm
150
250
100
57
50
610
20
0
25
5
10
15
5349
200
64
A95-19Ext
erna
l sta
tic p
ress
ure
Upper limit of ESP(standard ESP)
75 81
A125-24
1300rpm
1100rpm
79 82
A150-24
1000rpm
3501400rpm
900rpm
A132-24
1200rpm
A116-24
73
100
7463
250
150
65
300
67 69610
50
200
71
A160-24
A112-24
A106-24
A140-24
Air flow (m³/min)³
2O) (Pa)
Upper limit of ESP(standard ESP)
90
900rpm
A106-24 A112-24
5
1200rpm
A140-24
86
A116-24
88
A132-24
A150-24
1000rpm
92 94
1100rpm
1300rpm
350
A125-24
0
0
0
5
5
5
0 07876
50
100
8074
200
84
150
72
250
82
300
70
Air flow (m³/min)³
H2O) (Pa)
Upper limit of ESP(standard ESP)
1391350
150
151127
0
0
0
0
5
5
5
123
50
200
131
250
100
147143
300
155
B200-28
B170-28
350
B160-28
163159
5
B186-28
B224 28
B177-28
H2O) (Pa)
Upper limit of ESP(standard ESP)
1200rpm
1000rpm
800rpm
1100rpm
900rpm
2B-180-2
2B-180-
350
2B-160
199196
1200rpm
186
1000rpm
1100rpm
2B-186-2
300
200
150
162
250
170
1000
0
0
5
5
5
0
174154
50
0158 166150 178164
800rpm
900rpm
2B-167
182
5
190
2B-225-3
2B-250-
2B-250
2B-250-3
2B-250
Air flow (m³/min)³
2 ) ( )
Upper limit of ESP(standard ESP)
9 10
Wiring and Piping
DUCT TYPE
FDR05N/06NY1GRUR05N/06NY1
FDR08N/10NY1GRUR08N/10NY1
FDR13N/15N/18N/20NY1GRUR13N/15N/18N/20NY1
FVPGR10NY1GRUR10NY1
Power
Refrigerant piping
(Liquid, Gas)
Wiring
GroundGround
Power
FVPGR13N/15N/18N/20NY1GRUR13N/15N/18N/20NY1
Power
Refrigerant piping
(Liquid, Gas)
Wiring
Ground Ground
Power
FVGR08N/10NV1RUR08N/10NY1
Refrigerant piping
(Liquid, Gas)
Wiring
Ground
Power
Ground
FVGR05N/06NV1RUR05N/06NY1
Refrigerant piping
(Liquid, Gas)
Wiring
Ground
Power
Ground
DIRECT AIR BLOW TYPEFLOOR STANDING TYPE
DUCT CONNECTION TYPE
RemoteController
Power
Refrigerant piping
(Liquid, Gas)
Wiring
Ground
Ground
Power
RemoteController
Power
Refrigerant piping
(Liquid, Gas)
Wiring
Ground
Ground
Power Power
Refrigerant piping
(Liquid, Gas)
Wiring
Ground
Ground
Power
RemoteController
DIMENSIONS (Unit: mm)
950
750
A B C
720 o/ 9.5
920 o/ 12.7
D
o/ 19.1
750 720 o/ 9.5 o/ 19.1
o/ 22.2
Liquid pipe conn. (C) C1220T brazing Gas pipe conn. (D) C1220T brazing Upper drain outlet (PS 1B Internal thread) Power supply & control wire intake Digital remote controller
12345
510
1870
325
740
370
330
250
100
100
70
1870
35
510
1
2
34
1140
50150
474
5
1170
1170
510
1870
325
740
370
330
250
100
100
70
1870
35
510
A
1
2
34
B
50150
474
5
A
SDR3150151CSDR3150152BSDR3150153C
SDR3150154C
Liquid pipe conn. (ø 12.7) C1220T brazing Gas pipe conn. (ø 28.6) C1220T brazing Upper drain outlet (PS 1B Internal thread) Power supply & control wire intake Digital remote controller
12345
DIRECT AIR BLOW TYPEFLOOR STANDING TYPE
FVGR05NV1FVGR06NV1FVGR08NV1
FVGR10NV1
FVGR05NV1
FVGR08NV1
FVGR06NV1
DUCT TYPE
11 12
Liquid pipe connection (ø 9.5) Gas pipe connection (ø 19.1)Drain pipe connection (PS 3/4B Internal thread)
Earth terminal Power supplySuspension bracket
123456
Liquid pipe connection (ø 9.5) Gas pipe connection (ø 19.1)Drain pipe connection (PS 3/4B Internal thread)
Earth terminal Power supplySuspension bracket
123456
850
756
1200 or more
90 85
46
148
99
9 9
35
735
4XP.
150=
600
4XP.
150=
600
735
900
950
1000
99
50
800
or m
ore
266
5058
63
261
75
150
58
266
50
418
45015
0
35
Service Space
2-M4 Burring holes(Both sides) 2-M4 Burring holes
(Both sides)
6
3
3
452
13
99
50
3
3850 3535
Service Space
6-M4Burring holes
6-M4Burring holes
(Both sides) (Both sides)
92-M4 Burring holes(Both sides) 2-M4 Burring holes
(Both sides)
1200 or more
90 8546
148
9
967
5XP
.180
=90
0
800
or m
ore
266
5015
058
63
261
75
5XP
.180
=90
096
7
1130
1180
1230
9 9
756
266
5815
0
5041
845
0
2
6
5 4
13
3D062899C
3D062900C
FDR05NY1G
FDR06NY1G
DIMENSIONS (Unit: mm)
DUCT CONNECTION TYPE
SDR3150177SDR3150178SDR3150179
SDR3150176
140
1147
1170
1170
1187
510
177
334216
571
1670
1740
470
724
70
325
5051
0
39029
2
146334
31 52
290
250
290
390
25040
1
2
34
50
150
250
100
100
5
50
1800
915
325
H 70
5260
251
0
F
720
A
1870
G
720
C
E
B D33
J
1
2
34
50
150
250
100
100
5
Liquid pipe conn. (ø 12.7) C1220T brazing Gas pipe conn. (ø 28.6) C1220T brazing Upper drain outlet (PS 1B Internal thread) Power supply & control wire intake Digital remote controller
12345
Liquid pipe conn. ( K ) C1220T brazing Gas pipe conn. ( L ) C1220T brazing Upper drain outlet (PS 1B Internal thread) Power supply & control wire intake Digital remote controller
12345
FVPGR13NY1GFVPGR15NY1GFVPGR18NY1GFVPGR20NY1G
FVPGR10NY1G
1470
1170
A B K
477 o/ 15.9
558 o/ 15.9
C
398
474
D
295
438
E
344
407
F
1187
1487
G
1170
1470
J
205
1170 477 o/ 12.7398 295 344 1187 1170 205
237
1470 558 o/ 15.9474 438 407 1487 1470
H
1147
1447
1147
1447 237
FVPGR15NY1G
FVPGR13NY1G
FVPGR20NY1G
FVPGR18NY1G
13 14
Gas pipe connectionLiquid pipe connectionService port (in the unit)
Grounding terminal M5 (in switch box)
Refrigerant piping intakePower supply wiring intakeControl wiring intakeDrain pipe connection
1
2
3
4
5
6
7
8
8
30
2
55
6
61350
620
5
140
89
71
30
4
117
53
16
89
6
5
67
95
16
54
13
84
102
70
54
140
41
7
55
223
19
145
900
9595
58
(345
355)
48
96
1345
60
30
45 376
52
75
Hole for anchorbolt 4-M12
410
435
142
320
19
1
24
3
191
5
80
3D063042A
RUR05NY1RUR06NY1
67
1570
C
163
177
160 67
133
70
792
746
1680
577
163
738
393
4516
0
DETAIL FOR FRONT SIDE
DETAIL FOR BOTTOM SIDE
163
930
176
123
64
234
224
B
224
64
393
176
765
215
577
22.5-mm-Oblong holes4-15
178
661
A
129
100
(Pitch of foundation bolt holes) (Foundation bolt hole)
(Pitc
h of
foun
datio
n bo
lt ho
les)
737
722
4
3
6
8
5
4
1
2
1
2
710
9
(knock-out hole)
(knock-out hole)
(knock-out hole)
(knock-out hole)(knock-out hole)
Liquid pipe connection portGas pipe connection portGrounding terminalPower cord routing hole (side)Power cord routing hole (front)Power cord routing hole (front)Power cord routing hole (bottom)Wire routing hole (front)Pipe routing hole (front)Pipe routing hole (bottom)
1
2
3
4
5
6
7
8
9
10
12.7 Flare connection
(D) Brazing connectionLiquid pipe
2.Gas pipe
Notes)1.Detail For Front Side And Detail For Bottom Side Indicate The Dimensions After Fixing The Attached Piping.
RUR08NY1RUR10NY1
3D062886B3D062887B
69
A B
75
16
22
D
22.2
28.6
RUR08NY1
RUR10NY1
C
165
171
DIMENSIONS (Unit: mm)
OUTDOOR UNIT
Liquid pipe connection (ø 12.7) Gas pipe connection (G)Drain pipe connection (PS 3/4B Internal thread)
Earth terminal Power supplySuspension bracket
123
456
3D062901C3D062902C
3D062912C3D062913C3D062914C
A B E FDC5-M4
Burring holes
6-M4Burring holes5XP.180=9001076 1380 14301330
4XP.180=720876 1180 1230
G
ø28.6
ø22.21130
(Both sides) (Both sides)
2-M4 Burring holes(Both sides)
2-M4 Burring holes(Both sides)
1200 or more
Service Space
800
or m
ore
CB D F G H
1402 16209XP.150=1350 1750 1770 24
E
1710
1762 198011XP.150=1650 2110 2220 542070
A
10- o/ 3.1 holes
1402 16209XP.150=1350 1750 1770 24171010- o/ 3.1 holes
12- o/ 3.1 holes
Notes: 1Prepared holes for M4 tapping screw.
Evaporator air inlet connectionEvaporator air outlet connectionLiquid pipe connection (J)Gas pipe connection (K)Drain pipe connection (PS 1B Internal thread)
Earth terminal Power supply intakeThe holes for anchor bolts
12345
678
600100
7- o/ 3.1 holes*1
4- o/ 3.1 holes*1
*1
(Upward and downward)
(Both sides)3- o/ 3.1 holes*1
(Both sides)
A
10
50 or more
Supporting plate
(Commercially available)
(Upward and downward)
Service Space
Service Space
55
55
3XP
.150
=450
2XP.
150=
300
544
625
4538
257
22.5
349
61
476.
5 72.5
6XP.
150=
900
B C D E F G
H 172
800
or m
ore
800
or m
ore
100
or m
ore
50 or more Supporting plate
(Commercially available)
100
or m
ore
1045
205 80 205 80
10
85035
500 or more
763805 10
10
35
6
7
6
7
85
5
12
J K
ø12.7 ø28.6
ø15.9 ø34.9
ø15.9 ø34.9
39
10 10
398506
3
3
3 2
45155
63
311
160
294
468
A B AB C ED50
0
10050 50
294
160
67 67
47
10
79
10
46
1
99 58
732
F F
FDR08NY1G / 10NY1G
FDR13NY1G / 15NY1G / 18NY1G / 20NY1G
[FDR08NY1G] [FDR10NY1G]
FDR08NY1G
FDR10NY1G
[FDR13NY1G][FDR15NY1G]
[FDR18NY1G][FDR20NY1G]
FDR13NY1G
FDR15NY1G
FDR18NY1GFDR20NY1G
43
15 16
100 or more
900 or more
100 or more
500 or more
Service Area
Space required for indoor unit installation (Unit: mm)
FVPGR10NY1GFVPGR13NY1GFVPGR15NY1GFVPGR18NY1GFVPGR20NY1G
100 or more
900 or more
100 or more
500 or more
Service Area
FVGR05NV1FVGR06NV1FVGR08NV1FVGR10NV1
FDR13NY1GFDR15NY1GFDR18NY1GFDR20NY1G
FDR05NY1GFDR06NY1GFDR08NY1GFDR10NY1G
DIMENSIONS (Unit: mm)
DETAIL FOR FRONT SIDE
DETAIL FOR BOTTOM SIDE
22.5-mm-Oblong holes4-15(Pitch of foundation bolt holes) (Foundation bolt hole)
(Pitc
h of
foun
datio
n bo
lt ho
les)
(knock-out hole)
(knock-out hole)
(knock-out hole)
(knock-out hole)
(knock-out hole)
Liquid pipe connection portGas pipe connection portGrounding terminalPower cord routing hole (side)Power cord routing hole (front)Power cord routing hole (front)Power cord routing hole (bottom)Wire routing hole (front)Pipe routing hole (front)Pipe routing hole (bottom)
1
2
3
4
5
6
7
8
9
10
(C) Flare connection
(B) Brazing connectionLiquid pipe
2.Gas pipe
Notes)1.Detail For Front Side And Detail For Bottom Side Indicate The Dimensions After Fixing The Attached Piping.
171
1056
1049
67
224
70
177
765
64
100
163
393
1680
123
577
1240
133
160
234
1570
48
163
64
176
972
A
67 163
176
224
45
577
1102
178
160
213
129
737
722
393
4
9
3
1
2
1
2
64
8
5
710
22
A
24
28.6
B
34.9
12.7
C
15.9
RUR13NY1
RUR15NY1RUR18NY1RUR20NY1
3D062890B3D062891B
RUR13NY1RUR15NY1RUR18NY1RUR20NY1
1200 or more
800 or more
800 or more
800 or more
800 or more
230or more
When installing the switch box, the suspension bolt should be 230 mm or more away from the unit (so that maintenance can easily be carried out the switch box).
230or more
When installing the switch box, the suspension bolt should be 230 mm or more away from the unit (so that maintenance can easily be carried out the switch box).
Provide enough clearance between the unit and the surrounding walls to prevent contact.
A o
r m
ore
A 570520
FDR05-06 type
Model
FDR08-10 type
Drain pan
Ceiling surface
Return air filer(commerciallyavailable)
Ceiling surface
Supporting plate (commercially avaliable)
Return air filter(commercially avaliable)
720
or m
ore
60 o
r m
ore
Provide enough clearance between the unit and the surrounding walls to prevent contact.
Space required for outdoor unit installation (Unit: mm)
For single unit installation
For RUR08NY1/10NY1/13NY1/15NY1/18NY1/20NY1
10 or more
10 or more
10 or more
10 or more
10 or more
300 or more
300 or more
20 or more
20 or more
10 or more
50 or more
50 or more
50 or more
50 or more
50 or more
50 or more
500 or more
500 or more
500 or more
500 or more
300 or more
300 or more
200 or more
100 or more
100 or more
100 or more
100 or more 100 or more
Pattern 1
Pattern 2
Pattern 3
1500
mm
h2
500
mm
h1
If more units are to be installed than are catered for in the above patterns your layout should take account of the possibility of short circuits.
Notes:1Heights of walls in case of Patterns 1 and 2:
Installation space to be shown in this drawing is based on the cooling operation at 35 degrees outdoor air temperature. When the design outdoor air temperature exceeds 35 degrees or the load exceeds maximum ability because of much generation load of heat in all outdoor unit,take the suction side space more broadly than the space to be shown in this drawing.
2If the above wall heights are exceeded then h2/2 and h1/2 should be added to the front and suction side service spaces respectively as shown in the figure on the right.
3When installing the units most appropriate pattern should be selected from those shown above in order to obtain the best fit in the space available always bearing in mind the need to leave enough space for a person to pass between units and wall and for the air to circulate freely.
4The units should be installed to leave sufficient space at the front for the on site refrigerant piping work to be carried out comfortably.
Front : 1500 mmSuction side : 500 mmSide : Height unrestricted.
Wall height unrestricted
Front
Front
Front
Front
Front SuctionSide
Unit : mm
Front
Front
Front10 or more
10 or more
10 or more
10 or more
20 or more
300 or more
20 or more
50 or more 50
or more
50 or more
50 or more
500 or more
600 or more
500 or more
500 or more
100 or more
100 or more
100 or more
Pattern 1
Pattern 2
Front
Front
Front
Front
10 or more
10 or more20 or more 20 or more
50 or more
50 or more
500 or more
500 or more
300 or more
300 or more
200 or more
400 or more 400 or more
100 or more
100 or more 100 or more
Pattern 1
Pattern 2
Pattern 3 Wall height unrestricted
Front
Front
Front
For installation in rows
For centralized group layout
(Please refer to engineering databook for other installation patterns.)
17 18
For RUR05NY1/06NY1
300 or more
1000 or more
200 or more
100 or more
100 or more100 or more
100 or more
1000 or more
100 or more
500 or less
1000
or m
ore
500 or more
150 or more
150 or more 150 or more
500 or less
1000
or m
ore
300 or more
1000 or more
200 or more
500 or less
1000
or m
ore
500 or less
500 or more
1000
or m
ore
500 or less
1000 or more
1000
or m
ore
When there is an obstruction on the inlet side
When the obstruction on the outlet side is higher than the unit itself (There is no limit to the height of the obstruction on the outlet side.)
For other patterns, please refer to engineering databook.
When there are obstructions on both the inlet and outlet sides
When there is an obstruction on the outlet side
When there are obstructions on the inlet side and both lateral sides
2. For series installation (more than two units)
When there are obstructions on both sides
Pattern 1
When the overhead space is open
1. For single unit installation
When there is an obstruction only on the inlet side
When there is an obstruction in the overhead space
When the overhead space is open
When there are obstructions on both sides
When there is an obstruction in the overhead space
When there is an obstruction on the inlet side
When there are obstructions on the inlet side and both lateral sides
2. For series installation (more than two units)
1. For single unit installation
1. For single unit installation
When the overhead space is open
2. For series installation (more than two units)
1. For single unit installation
2. For series installation (more than two units)
1. For single unit installation
2. For series installation (more than two units)
An obstruction in the overhead space
An obstruction in the overhead space
An obstruction in the overhead space
An obstruction in the overhead space
An obstruction in the overhead space
H
L
500 or more 100 or more
1000 or more300 or m
ore
L H
L H
L H