ALARM LOCK

10Toll Free (800) 233-2146 Toll Free Fax (877) 908-5625

Model PG10• The Pilfergard Model PG10 is an exit door alarm designed to deter the use of the secured door by sounding a twin action alarm when opened by unauthorized personnel. The alarm can be bypassed from inside or outside by the use of a key. (Requires standard mortise cylinder not sup-plied.) This durable surface mount unit is easily installed and is tampersupervised with two sepa-rate tamper switches. Its test button verifies battery. Optional AC power supply available.

Stocking Part # PG10

Model PG21• Two selectable arming modes –1. Always armed mode – when key is turned counter clockwise to the disarm position, the key can-not be removed. To remove key, turn back to arm mode, thus keeping unit armed always.2. Standard arming mode – when key is inserted turning counter clockwise will disarm and key can be removed. Turning key clockwise will arm and key can be removed. • Max-Flex Terminals, allow-ing for any or all of the following: • Continuous power with the addition of an external power supply• Multiple door monitoring permitted with built-in external reed switches • Status Indicator – The LED will indicate RED when armed. • Entry Delay Time Options – include 15 seconds, 1 minute 15 seconds & 3 minutes 15 seconds • Sleek model design key-activated door alarm for use on stand-ard size and narrow stile doors • Unauthorized use of door causes alarm to sound and activates LED indicator • Options include continuous alarm, minute shutdown with auto reset and exit/entry delay • Uses standard mortise cylinder • Tamper switch supervised • For exterior key control, op-tional RIM cylinder may be used • Metallic silver or duronodic finish

Stocking Part #’s PG21-MB (Duro) & PG21-MS (Silver)

Model PG30Keypad-controlled narrow stile door alarm, similar to PG21, plus: • Digital codes for master, management and passage (used for auto-arming) • 3 security levels for: a) highsecurity b) unattended applications c) flexible control for delivery doors, etc.• Audible low battery warning • 3 Programmable 95db siren styles: sweep, pulsed, andsteady • Logo key is dual function test button

Stocking Part #’s PG30-MB (Duro) & PG30-MS (Silver)

MODEL 11A(Dead bolt only; Not for ADA applications)• Model 11A is an exit lock designed to control unauthorized use ofemergency doors. It provides trouble free service and deters theftfrom within and outside. Unauthorized use sounds alarm which canonly be reset or bypassed with key. Standard features include 1 inchthrow deadbolt, warning alarm, outside cylinder capability, tamperswitch and long life battery pack. Available for use with doubledoors or for use with existing panic bars. Optional AC power supply.Requires standard RIM cylinder (not included).

Stocking Part # 11A

ALARM LOCK

11Toll Free (800) 233-2146 Toll Free Fax (877) 908-5625

Model 271• For use with electrified locks. An easymeans for bringing electric current fromthe hinge side of a door frame to thedoor. 18” flexible armored cable. End brackets are deep drawn anodized aluminum to conceal wire connections.

A – SIRENLOCK™ MODEL 250B – SIRENLOCK™ MODEL 700• Deadbolt and deadlatch meet relatching requirements• Blaring 95db dual tone siren• Selectable 2-minute alarm orconstant alarm• 9V battery powered andaudible low battery warning• Meets or exceeds UL,CFM, ADA, NYC housingrequirements• 250/700 Models havechangeable 2 minute alarmcutoff or manual reset.• Models 700 and 710 are available in 33” and 48” versions• Non-handed surface installations on single or double doors

Stocking Part #’s 250 x US28 & 700 x US28

B

A

Model 44• The Double Door Holder secures theinactive door to the frame while theactive door is closed. Releasing theactive door automatically allows both doors to swing freely. Reversible, right or left hand doors. Cast alu-minum 8 1/2” long, 3” wide and 2 1/2” high

Model PP100• For use with all PG10, PG21/E, PG30,250, 700, 80, 260, 710 and 715 models.The PP100 conserves the battery which automatically takes over as the power source to sound the alarm in the event of a power failure or intentional cut-off. A built-in circuit breaker with push-buttonreset eliminates troublesome fuse replacements. Includes a cam lock cylinder and 6’ of armored cable adequate to provide a door loop at the hinged-side of the door. Can be used with all 6V and 9V models.

Model BP-6Replacment Battery for: PG10, 11A, PG21, and PG30

Model 221 and 224 TransformerPlug in transformer 24volts AC or DC

Also stocking these additional parts:• 767 x 28 Metal mounting plate for glass doors • AC9 Optional AC power supply • P0273 Alarm box cover • P1070 Alarm box cylinder • P1243 Keeper plate • P1244 Keeper plate • P1250 Clapper plate • P1267 Cylinder lock nut • P2889 Tamper switch • P2890 Micro switch • S1238 Keeper (K2) • S1241 Keeper plate • S3155 Bat-tery plug & wire • S3158 Lock bolt complete • S3174 Magnetic actuator

Powermag Magnet

• Strong holding force of 1200 lb. • Perfect for both single and double doors and even sliding doors• 5-year limited warranty• Low voltage (12 or 24VDC); including field-selectable models

ALARM LOCK

12Toll Free (800) 233-2146 Toll Free Fax (877) 908-5625

DL2700 Series• Grade 1 Durability – BHMA Grade 1 Lockset with rugged clutch plus, vandal-proof all metal keypad.• All IC Core models include a large format key in knob cylinder, supporting Best, Falcon, Arrow and KSP. Other interchangeable core preps available: Yale, Medeco, Sargent, Corbin/Russwin, Schlage• Multi-level user capability: Master, manager, emergency, service codes• Up to 15 different user codes (3-5 digits)• Individual, group or total user lockout codes• Non-handed for easy installation and versatility• 2-wire remote override or key bypass capability• Passage mode• Visual and audible entry indicators• “WP” weatherproof models -31°F to +151°F (-35°C to +66°F)• Retrofits knobsets using slightly modified ANSI A115 Series Prep• Battery operated; uses 5 AA batteries

Stocking Part #’s• DL2700/26D• DL2700/26D-IC• DL2700WP/26D• DL2700WP/26D-IC

DL2800 Series

• Grade I, heavy duty cylindrical lockset, UL listed to the 10C Positive PressureSpecification and FCC certified. ADA compliant levers.• DOOR PREP: Standard ANSI A115 Series Prep, modified by adding additional through-bolt holes.• Rugged clutch mechanism and Grade 1 durability ensure long life• 150 scheduled events, including 4 “quick schedules” for programmingthe 4 most common time schedules in one step• 200 user codes including: Master, manager, supervisor and basic user.Also one-time entry service code• Weatherproof performance, water-sealed for use inside and out, withoperational temperature range of +151°F to -31°F (+66°C to -35°C)• Entry allowance from 5-15 seconds• Greater security with “temporary keypad lockout” after 3unsuccessful code-entry attempts• 1000 event audit trail with time/date stamp for a printable record ofdoor access activity by user• Real time clock allows logging of events to within 1 second of accuracy• Programmable relays energize when one or more selected events occur• 4 time-out functions allow a user to enable other users or unlock the lockfor some time period without needing to return to the lock• Easy to install in about an hour. Retrofits most cylindrical locksets anddigital locks• Battery operated; uses 5 AA batteries• Available in standard key override

Stocking Part #’s• DL2800/26D• DL2800/26D-I/C