ali mahmoud automation projects
TRANSCRIPT
-Wiring and instruments installation- loop check and function test- Workstation Hw and S/w Installation,Rockwell programs Activation tools -PLC5/60 programming with rslogix5- SCADA system and HMI configuration with RSview32. -Scada Application Development; with Graphic, Data Log, Alarms, Trends..etc.- AB Panel view Configuration with Panelbuilder32.-Network Setup ,DH+ and OPC Serversautomation L1and L2- Production report generation over Ethernetnetworks using vb6 and Microsoft networks services Dcom and DDE.- Commissioning and start up
Anode Paste Plant
(6/2000 – 6/2001)
Anode Handling (1/2001 – 1/2001)
-PLC5/60 programming with rslogix5- SCADA system and HMI -configuration withRSview32
-AB Panel view Configuration with Panelbuilder32
Spare Parts Database(1/2001 –6/2001 )
Wiring and instruments installation- loop check and function test- Workstation Hw and S/w Installation, Rockwell programs Activation tools -PLC5/60 programming with rslogix5- SCADA system and HMI configuration with RSview32.-Scada Application Development; with Graphic, Data Log, Alarms, Trends..etc.-AB Panel view Configuration with Panelbuilder32-Network Setup DH+ .automation L1and L2- Commissioning and start up
Anode Paste PlantSecond production line
(6/2002 –6/2003)
Coke Calciner Unit(9/2003 – 3/2004)- Remote I/O extension unit - loop check and function testWorkstation Hw and S/w Installation,Rockwell programs Activation tools-PLC programming with new Rslogix5 rather than old DOS 6200- new SCADA system and HMI configuration with rsview32 programs rather than old DOS op teos- Rslinx,RIO and DH+ networks- Commissioning and start up
Panel view Updating (1/2006 – 1/2006)
-RIO to DH+ Network -Panel view 900,1000
-AB Panel view Configuration with Panelbuilder32
Casting and Rolling Mill
Magelis XBTG Telemecanique operator terminals updating using Vijeo design software
(1/2015 – 1/2015)
(7/2016 – 8/2016)
RIO PanelView to PanelView Plus Comms Migration using FactoryTalk® View Machine Edition
Furnace Crane control
Anode paste plant
Pitch Melting Unit (9/2009 – 6/2010)
- -Wiring and Instruments InstallationWorkstation Hw and S/w Installation,Rockwell programs Activation tools
- -PLC programming with Rslogix500- SCADA system and HMI configuration with rsview32 programs- loop check and function test- commissioning and start up -Allen Bradley SLC500 Configuration with Rslogix500
-Ethernet(fiber,RJ45) networks
Pitch fume treatment unit(regeneration temperature oxidizer)
-Loop check and function test -Commissioning and start up
-Thermocouples
-Process Controller -Siemens Logo
-Micro master speed variator
(1/2011 – 4/2011 )
Coke Calciner Unit(9/2011 – 3/2012)- Updating A.B PLC5/15 to controllogix5000 - Slc500 , controllogix5000 DH+ connection- Remote I/O to control net extension unit - loop check and function testWorkstation Hw and S/w Installation,Rockwell programs Activation tools- PLC programming with Rslogix5000- SCADA system and HMI configuration with rsview32 programs - Allen Bradley PLC controllogix5000 Configuration with Rslogix5000 - commissioning and start up - Ethernet ,control net ,RIO and DH+ networks
New Scraps handling chain (3/2012 – 5/2012)
-PLC5/60 programming with rslogix5- SCADA system and HMI -configuration withRSview32
Oil Heating Unit (5/2011 – 8/2012)
-Wiring and Instruments installation -Workstation Hw and S/w Installation,
SIMATIC Automation License Manager tool.
-Updating plc from old S5 to S7-Siemens S7 300 programming with Step7
manager -SCADA system and HMI configuration
with SIMATIC WinCC flexible rather than old OS2 O.S.Scada Application Development; with Graphics, Data Log, Alarms, Trends..etc.
-Network Setup MPI -loop check and function test
-Commissioning and start up
Paste mixer new mixer installation ERICH company (1/2013– 7/2013)
-Wiring and Instruments installation- Loop check and function test
-Greasing timing sequence -PLC5/60 programming with rslogix5
- SCADA system and HMI -Configuration withRSVIEW32
commissioning and start upPID Regulation to Hydraulic cylinder Gate
Filter Gate Damper (8/2013 – 8/2013)
-Wiring-motorized cylinder installation-Virtual Position feedback process
-Plc5/60 PID regulation-SCADA Modification RSview32
Coke Silos (9/2013 – 10/2013)
-Updating scada programs from old data32 to RSview32WINTNT to XP O.S
-New SCADA project with Rockwell -Workstation Hw and S/w
Installation,Rockwell programs Activation tools.
-SCADA system and HMI configuration with rsview32 Graphix, DataLog, Alarms, Trends..etc
-Serial DH485 ,Ethernet and DH+ networks
Mixer DC motor Updating (2/2014 – 3/2014)
-PLC5/60 programming with rslogix5 -PID power Regulationfor ac seed variator
-PID regulation for hydraulic cylinder gate controller
General Dedusting project(dust collection and recycling system)
(9/2015 – 10/2016)
-Wiring and Instruments installation. -Workstation Hw and S/w Installation,
Rockwell programs Activation tools.
-PLC programming with Rslogix500- SCADA system and HMI configuration with rsview32 programs- loop check and function test- Commissioning and start up A.B SLC500 Configuration
with Rslogix500 -Ethernet(fiber,RJ45) networks
Industrial Networks(Supervisor automation level project)
(1/2016 – 3/2016)
Networks (fiber, copper , Industrial WIFI ) Ethernet , connection between 3 different plc projects and merging 3 scada projects in one project.
-Ethernet (RJ45-FiberOptic) Network H/ware –S/ware setup
- Fiber Optic Patch, terminals Installation
-OPC Server-Rslinx Gateway setting
-Siemens scalance w redundancy industrial WIFI
Supervisor workstation
Dedustingworkstation
SLC500
Pitch meltingworkstation
SLC500
Paste plantworkstation
PLC5/60
PLC5/60
PLC5/60
PLC5/60