alti transition data sheet

10
1 | Page ALTI TRANSITION UAV DRONE BUYERS GROUP – PRODUCT DATA SHEET 09 Jan 2017

Upload: michael-costello

Post on 07-Feb-2017

290 views

Category:

Technology


6 download

TRANSCRIPT

Page 1: ALTi Transition Data Sheet

1 | P a g e

ALTI TRANSITION

UAV DRONE BUYERS GROUP – PRODUCT DATA SHEET

09 Jan 2017

Page 2: ALTi Transition Data Sheet

2 | P a g e

DOUBLE HYBRID

Multi-rotor

Fixed wing

Electric lift

Fuel pusher engine (20cc)

The Transition is a double-hybrid PURE VTOL

The ALTI Transition is able to vertically ascend to

altitude, where it transitions into forward wing-bound

flight for the duration of the mission. With the mission

complete there is a smooth and quick transition back

to hover with a final descent for a pin point landing.

Page 3: ALTi Transition Data Sheet

3 | P a g e

ENDURANCE

6 hours on the wing

<10 minutes hover

The ultra-light weight Carbon Kevlar fuselage is wind

tunnel tested featuring an advanced design with

dihedral, washout, winglets and more. The Transition

also has duel elevators for redundant control.

Page 4: ALTi Transition Data Sheet

4 | P a g e

PRICING and AFFORDABILITY

Buying through the UAV Drone Buyers Group gives you

access to bulk buying power in addition to the

Transitions lower operating costs. There is no need for

expensive launch and recovery hardware and less

staffing, The ALTI Transition price is lower than any

comparable system available.

Group price is 10% - 25% off depending of the

collective order size. Contact us for more information.

ALTI Transition System (including Ground Control

Station) - $75,000.00

ALTI Transition Unit (Aircraft only) - $65,000.00

ALTI Transition BASE VERSION

(Hardware aircraft only, excludes Autopilot,

communication links, GSC and payload)

Fuel Version $45,000.00

All-electric Version $40,000.00

ALTI Technical Training - $5,500.00 per

technician/operator.

Page 5: ALTi Transition Data Sheet

5 | P a g e

PAYLOAD

Support for a wide range of payloads, including

advanced EO/IR, multi-spectral and more.

Max Payload Weight: 1kg

Suggested Sensor: Next Vision EO/IR

Page 6: ALTi Transition Data Sheet

6 | P a g e

GROUND CONTROL STATION

The needs and requirements of our clients vary greatly,

along with the wide range of uses, payloads and

sensors, so we offer custom built and designed ground

control systems per order to suit.

From short range basic control systems to long range,

vehicle mounted data telemetry; control, video link

and payload control systems, as well as IP rated

weatherproof hardware and flight cases.

Page 7: ALTi Transition Data Sheet

7 | P a g e

TRANSITION SPECIFICATIONS

Engine: Electric lift motors and 20cc four stroke

petrol motor pusher engine

Wingspan: 2760mm

Length: 2300mm

Height: 490mm

MTOW 15kg

Max Payload Weight: 1kg

VTOL Propeller Size: 18"

Fuel Pusher Propeller Size: 15-16"

Electric VTOL Endurance: <10 min

Fuel Fixed Wing Endurance <6 Hours

CONTROL SYSTEM

Fully featured

Autonomous PX4 based open and proprietary

software and hardware

Page 8: ALTi Transition Data Sheet

8 | P a g e

REDUNDANCY

With split dual elevator the ALTI Transition offers

redundant flight control. The airspeed sensor along

with sophisticated code allow for stall speed detection,

where the multi-rotor will instantly take control if

required.

With a host of other unique features and fail-safes

including weather veining, overbank protection,

velocity checks and more

Page 9: ALTi Transition Data Sheet

9 | P a g e

TRANSPORT

The wings and rear tail-boom are removable

No need for tools

Size reduces significantly for rapid deployment and

transport.

Transport case supplied for all equipment

TRAINING

Mandatory and provided in South Africa

SERVICE AND SUPPORT

ALTI has agents in various countries to service and

support your purchase.

Page 10: ALTi Transition Data Sheet

10 | P a g e

How the Drone UAV Buyers Group works – Short Version

1. You Choose a particular drone that we have on offer,

2. Ask to be put on the Expression of Interest list,

3. You are advised when we have reached the target number of buyers,

4. You confirm you are ready to proceed to buy,

5. You are invoiced (using PayPal’s invoice system) for the buy-in fee that gives you access

to the discount (using PayPal so you have the PayPal buyer protections). You pay upon

receipt of invoice,

6. We submit names and contact details to the manufacturer so you can choose

preferences and receive the nominated discount

7. Then you arrange shipping and,

8. You receive the product and fly happy.

Detailed Version – Please read: https://goo.gl/TVpTXr