amber glass collection
DESCRIPTION
As the manufacture, GBM offers an extensive range of high end glass mosaics, exclusively to our dealers and distributors. See our products for yourself and be ready for a suprise! GBM, it's your factory! Call (888) 862-8397 www.GBMceramics.comTRANSCRIPT
amber glass
AMBER
GLLASS
Cappuccino(HPG 136)
Oregano(HPG 158)
Miele(HPG 134)
Miele(HPG 134)
Caledonia(HPG 162)
Square
Matte Square
Miele(HPM 134)
Cappuccino(HPM 136)
Oregano(HPM 358)
Caledonia(HPM 162)
5/8” x 5/8” Glass Mosaics
Rectangle
Matte Rectangle
AMBER
GLLASS
Miele(HPG 334)
Cappuccino(HPG 336)
Cappuccino(HPG 336)
Oregano(HPG 358)
Caledonia(HPG 362)
Miele(HPM 334)
Cappuccino(HPM 336)
Oregano(HPM 358)
Caledonia(HPM 362)
Caledonia (HPM 362)
1 1/4” x 5/8” Glass Mosaics
330X330X3(13x13x1/8)
327X330X3(127/8x13x1/8)
10 11.651 1516X16(5/8x5/8)
10 11.169 1519X19(11/4x5/8)
Phone: 1.888.862.8397 Fax: 1.888.868.9887
9x19 20x20
3. Apply set- ting material using the notched side of a 1/4”x1/4” squar- squar- -notched trowel.
4. Smoothen out the setting material using the flat side of the flat side of the trowel; create an even bedding approximately 3/16” thick.
7. Apply the tile sheets onto the setting material. Align the tile sheets carefully, carefully, making sure that the grout lines are parallel with one another.
1. Clean surface of application. Surface should be free of dirt, paint, oils, curing compounds etc.
2. Make sure the back of the tile (and sub-strate) is clean. Wipe with a clean damp sponge.
8. Use a rubber grouting float to apply firm pres-sure onto the tile sheets, cre-ating a level surface.
9. Using a clean damp sponge or cloth, clean any excess set-ting material that may have “oozed” over the tile surface. the tile surface.
11. Apply grout into grout joints using a rubber grouting float. Completely fill the grout joints, be sure that there are that there are
13. When grout has set (or when haze begins to form on the tile surface) clean the tile with a the tile with a clean,damp sponge.
14. For final polishing, use a dry cheese- cloth to polish the tile, within the tile, within 24 hours of grouting. 10. Allow 24-36
hours, after installation, for tile to set before continuing.
no holes while applying grout.
12. Clean any excess grout with a damp sponge or cloth, before grout hardens.