amicus overview - d2r72yk5wmppdj.cloudfront.net · amicus overview ... 3d t-arms. work chairs...

work chairs

amicus overview

seating price & user guide – May 28, 2018

Outer Back is Plastic

• Amicus Chairs have been designed and tested for users weighing up to 300 lbs• Amicus Chairs are equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces could result inunexpected rolling and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealer for appropriateselection

• Amicus Task/Executive Chair with Synchro-Tilt is shown

Pivoting 3D Arm Cap45˚ inwards15˚ outwards

Amicus is a streamline design with intuitive user adjustability.

Lumbar Apex Height-Adjustment of 2 1/4"

(General Use has body fitcontour lumbar support

which is not user adjustable)

Back Tilt Lock

Five Star BaseTotal Arm Width Adjustment of:2D: T-Arms 3"3D: T-Arms 1 1/2"

Height-Adjustment:2D: 4"3D: 3"

Standard Seat Height-Adjustmentof 4"

Seat Depth Adjustment of 21/2"

Tension Adjustment

Statement of Line

2 3/8" (60mm)

Cantilever Frame – No Arms

Cantilever Frame – Integrated Arms

Four-Leg Frame – No Arms

Four-Leg Framewith Casters – No Arms

Four-Leg Frame – Integrated Arms

Four Leg Framewith Casters –Integrated Arms

Mid-Back – No Arms

Mid-Back – Loop Arms

Mid-Back – Fixed T-Arms

Mid-Back – 2D T-Arms

Mid-Back – 3D T-Arms

High-Back – No Arms

High-Back – Fixed T-Arms

High-Back – Loop Arms

High-Back – 2D T-Arms

High-Back – 3D T-Arms

work chairs

amicus dimensions & material requirements


SINGLE UPHOLSTERED DUAL UPHOLSTERED – SEAT DUAL UPHOLSTERED – BACK COM COL COM COL COM COL [yards] [sq. ft] [yards] [sq. ft] [yards] [sq. ft]

Mid-Back 1 1/2 15 1 8 1/2 1 10High-Back 1 3/4 20 1 8 1/2 1 1/4 12

COM/COL Material Requirement

Dimensions

For Conversion to Metric, multiply dimension by 25.4.

Seat Width Task Use 17 3/4"

Arm Height from Seat

Fixed T-Arm 8 1/2"

Loop Arm 9"

2D Arm 7 1/2"-11 1/2"

3D Arm 7 3/4"-10 3/4"

Backrest Width Task/General Use 18 1/2"

Width Between ArmsFixed T-Arm 18 7/8" Loop Arm 17 3/4" 2D Arm 17 1/2" - 20 1/4" 3D Arm 16 1/4" - 19 1/4"

Lumbar Apex HeightTask 7"-11"

Seat Depth Task 15" 1/2"-18"

Seat Height

Task Standard 16 1/2"-20 1/2"

Task Low 15"-18"

Task High 17 3/4"-22 3/4"

Angle between Seat and Back Task 97˚-113˚

Back Height from Seat

Task Mid-Back 21"

Task High-Back 24"

Overall Height (Standard Cylinder)

Task Mid-Back 38"- 42"

Task High-Back 41"- 45"

Overall Width Task/General Use 30"

Overall Depth Task Use 30"

WEIGHT

Task Mid Back 43 - 46 lbsTask High Back 43 - 46 lbs

More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching. Leather yield variesfrom 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape of hide. Thesize of the sewing pattern and the number of units ordered may also impact yield. Always round-up to the next hide.

work chairs

amicus dimensions & material requirements (continued)


SINGLE UPHOLSTERED DUAL UPHOLSTERED – SEAT DUAL UPHOLSTERED – BACK COM COL COM COL COM COL [yards] [sq. ft] [yards] [sq. ft] [yards] [sq. ft]

Guest Chairs Seat only 1 8 1/2 n/a n/a n/a n/aGuest Chairs Seat and Back 1 10 1/2 n/a n/a n/a n/a

COM/COL Material Requirement

Dimensions

For Conversion to Metric, multiply dimension by 25.4.

Seat Width 20 1/4"

Arm Height from Seat

8"

Backrest Width 19"

Cantilever

Lumbar Apex HeightGeneral Use 9"

Seat Depth 17 1/4"

Seat Height

Guest Four-Leg 17"

Guest Cantilever 18"

Arm Height from Floor 25 3/4"

Angle between Seat and Back 97˚

Back Height from Seat

15 1/2"

Overall Height (Standard Cylinder)

31"

Overall Width 24"

Overall Depth 22"

WEIGHT

Guest Cantilever 20 lbsGuest Four-Leg 20 lbs

More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching. Leather yield variesfrom 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape of hide. Thesize of the sewing pattern and the number of units ordered may also impact yield. Always round-up to the next hide.

amicus adjustment features & instructionswork chairs


SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT

LUMBAR HEIGHT ADJUSTMENT BACK TILT LOCK ADJUSTMENT

TILT TENSION ADJUSTMENT ARM WIDTH ADJUSTMENT

To adjust the angle of reclination,pull the lever up to unlock the backand leave the chair in free flowmode. Recline to the desiredposition and push the lever downto lock the back in place.

To adjust the lumbar height, graspboth levers and slide them up ordown to the desired position.Not available on Amicus GeneralUse Chairs.

To adjust the seat depth, push thelever down and simultaneously liftyour weight from the seat whilesliding the seat forward orbackward. Release the lever to lockthe seat in place. Not available onAmicus General Use Chairs.

To raise the chair, lift the lever upwhile lifting your weight from theseat until you reach the desiredlevel, then release to lock in place.To lower the chair, lift the lever upand allow your weight to push theseat down until you reach thedesired level, then release to lockin place.

Leaning back, determine if theresistance of the chair iscomfortable. For less resistance,pull tension adjustment lever outand turn it counterclockwise. Forgreater resistance, turn the lever clockwise.

To adjust the width of each arm,push the lever down to release thearm lock. Slide the arm inward oroutward to the desired position.Push the lever up to lock the armin place.

amicus adjustment features & instructions (continued)work chairs


2D ARM HEIGHT ADJUSTMENT 3D ARM ADJUSTMENT

3D ARM PIVOT ADJUSTMENT

To pivot the arm cap, grasp androtate inward or outward to thedesired position.

To adjust the arm height, press thetop half of the button in and raiseor lower it to the desired position.Release the button to lock in place.

To adjust the arm height, lift thebutton under the arm cap to raiseor lower it to the desired position.Release the button to lock in place.

work chairs


N A C XAmicus – Synchro-Tilt Task Chair

FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Back tilt can be locked in five positions or left free flow• Frame, outer back and five star base are plastic• Synchro-tilt 2.7:1 ratio• Tension control• Seat depth adjustment of 2-1/2"• Lumbar height adjustment of 4"• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete, or tileNOTESSingle Upholstered: The same fabric is applied to the seat and inside back.Dual Upholstered: Two different fabrics are applied to the chair, one fabric to the seatand the other fabric to the inside back. First fabric listed will apply to the back and is thegrade of fabric used to price the chair. A dual upholstery upcharge applies.

Fixed T-Arm 2D Arm

Loop-Arm

Size

F Mid-Back

H High-Back

MechanismStyle

1 StandardSynchro-Tilt (withseat slider)

Arm Style

N No Arms

F Fixed T-Arms

W 2D Width- &Height-Adjustable T-Arms

P 3D Width- &Height-Adjustable T-Arms with Pivot

Upholstery Style

S SingleUpholstered

D DualUpholstered

Back UpholsteryFinish

Fabric

Leather

Seat UpholsteryFinish

Fabric

Leather

Cylinder Style

1 Standard

2 High

3 Low

Frame & BaseFinish

E Ebony

Casters/Glides(Optional)

A Casters, Soft

B Glides, Hard

C Glides, Soft

PRODUCT OPTIONS

NACX H 1 L S 1 E

SAMPLE ORDER CODE

3D Arm

M501 M502

DESCRIPTION PRICE

COM/ COL/MID-BACK (F) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10

No Arms 871 914 953 994 1037 1077 1118 1160 1201 1343Fixed T-Arms 969 1010 1049 1091 1133 1174 1214 1256 1297 14402D Width- & Height-Adjustable T-Arms 989 1034 1073 1114 1155 1197 1237 1279 1320 14633D Width- & Height-Adjustable T-Arms 1039 1080 1121 1162 1203 1245 1285 1326 1368 1511

Leather Leather Leather LeatherMID-BACK (F) (Continued) LA LB LC LD

No Arms 1200 1248 1397 1446Fixed T-Arms 1296 1344 1494 15422D Width- & Height-Adjustable T-Arms 1319 1368 1516 15653D Width- & Height-Adjustable T-Arms 1367 1416 1564 1614

If Dual Upholstered (D) is specified add 183

If Soft Casters (A) are specified add 20

If Hard Glides (B) are specified add 20

If Soft Glides (C) are specified add 31

Pricing is continued on the following pages.

work chairs


N A C X Amicus – Synchro-Tilt

Task Chair (Continued)

DESCRIPTION PRICE

COM/ COL/HIGH-BACK (H) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10

No Arms 984 1034 1081 1129 1176 1224 1274 1321 1369 1535Fixed T-Arms 1081 1129 1177 1225 1273 1321 1370 1417 1466 16322D Width- & Height-Adjustable T-Arms 1104 1152 1201 1248 1296 1343 1393 1440 1488 16543D Width- & Height-Adjustable T-Arms 1152 1200 1248 1296 1343 1391 1440 1488 1535 1704

Leather Leather Leather LeatherHIGH-BACK (H) (Continued) LA LB LC LD

No Arms 1409 1475 1672 1737Fixed T-Arms 1506 1571 1768 18332D Width- & Height-Adjustable T-Arms 1529 1594 1792 18573D Width- & Height-Adjustable T-Arms 1577 1643 1838 1903

If Dual Upholstered (D) is specified add 183


If Hard Glides (B) are specified add 20

If Soft Glides (C) are specified add 31

work chairs


FEATURES• Outer back and arms are plastic and finished in Ebony• Multi-surface glides are standard when the Cantilever or Four-Leg frame style isspecified

• Hard casters are standard when the Four-Leg with Casters frame style is specified.Soft casters may be ordered as an option

NOTESWhen plastic back style is specified only the seat will be upholstered. When upholsteredpad on plastic back is specified both the seat and inside back will be upholstered.Not all configurations are available as Xpress. Please see Xpress catalogue and/orspecification software for details.

N A M GAmicus – Guest Chair

Size

D Low-Back

Frame Style

C Cantilever withGlides

F Four-Leg withGlides (Shown)

G Four-Leg withCasters

Arm Style

N No Arms

K Integrated Arms

Upholstery/BackStyle

Z Plastic

U Upholstered Padon Plastic Back

Upholstery Finish

Fabric

Leather

Frame Finish

E Ebony

K Mica Silver

Casters/Glides(Optional)

A Casters, Soft (For G framestyle)

D Glides (For C & F framestyle)

PRODUCT OPTIONS

SAMPLE ORDER CODE

NAMG D C K Z K

Xpress

Four-Leg with Glides Cantilever with Glides

DESCRIPTION PRICE

WITHOUT CASTERS

COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10

FOUR-LEG (F) PLASTIC BACK (Z)

No Arms 338 367 395 425 453 482 511 539 569 669Integrated Arms 379 407 436 466 494 522 551 580 610 709

FOUR-LEG (F) UPHOLSTERED BACK (U)


CANTILEVER (C) PLASTIC BACK (Z)


CANTILEVER (C) UPHOLSTERED BACK (U)


If Mica is specified add 60


Pricing is continued on the following pages.

work chairs


Xpress

N A M GAmicus – Guest Chair (Continued)

DESCRIPTION PRICE

WITHOUT CASTERS (CONTINUED)

Leather Leather Leather Leather LA LB LC LD

FOUR-LEG (F) PLASTIC BACK (Z)

No Arms 534 563 647 675Integrated Arms 575 603 687 715

FOUR-LEG (F) UPHOLSTERED BACK (U)


CANTILEVER (C) PLASTIC BACK (Z)


CANTILEVER (C) UPHOLSTERED BACK (U)


WITH CASTERS

COM/ COL/ Leather/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10

FOUR-LEG (G) PLASTIC BACK (Z)


FOUR-LEG (G) UPHOLSTERED BACK (U)


Leather Leather Leather Leather LA LB LC LD

FOUR-LEG (G) PLASTIC BACK (Z)


FOUR-LEG (G) UPHOLSTERED BACK (U)


If Mica is specified add 60


amicus overview - d2r72yk5wmppdj.cloudfront.net · amicus overview ... 3d t-arms. work chairs...

Documents