0.3mm contact pitch, 1mm above the board, flexible printed circuit … · 2019. 10. 12. · 3 fh26...

�Features 1. Extremely light weight

The typical version, with all 51 contacts loaded, weightsonly 0.1 grams.

2. Easy solderability on the PC board The soldering leads are on 0.6 mm pitch, exiting on frontand back of the connector.

3. Conductive traces on the PCB can run under theconnectorNo exposed contacts on the bottom of the connector.

4. Easy FPC insertion and reliable electricalconnectionProven Flip LockR actuator allows easy insertion of FPC.Tactile sensation when fully closed confirms completeelectrical and mechanical connection.

5. Accepts standard thickness FPC 0.2mm thick standard Flexible Printed Circuit board can beused. This is the only ultra-low profile ZIF connector allowing theuse of standard FPC.

6. Board placement with automatic equipmentFlat top surface and packaging on the tape-and-reel allowsuse of vacuum nozzles.Standard reel contains 5,000 connectors.

7. The connector does not use chlorine andbromine exceeding standard limits.(FH26W series) * Defined in accordance with IEC61249-2-21

Br 900ppm or lower, Cl 900ppm or lower, Br + Cl1,500ppm or lower

8. Available for 500 pieces packaging Although the normal product is 5,000 pieces per reel,500 winds per reel is also available.(Emboss reel external diameter is Ø180mm.)

12010.9

16.8mm

�Space saving(51 pos. shown)

�Can be mounted over conductive traces.

Metal fittings do no protrudeoutside of the connector body

No exposed contacts on the bottom of the connector

1.0m

m

3.2mm

FPCFPC

ActuatorActuatorActuator

FPC

�Operation

(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected(3) Close the actuator(4) FPC connected

q

w

r

e

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF ConnectorsFH26 Series

(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC(1) Actuator open(2) Insert FPC

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

2

FH26 Series�0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

UL94HB

---------------

---------------

Temperature: -55 ç/+15ç to +35ç/+85ç/+15ç to +35çTime: 30 / 2 to 3 / 30 / 2 to 3 (Minutes)5 cycles

Reflow: At the recommended temperature profileManual soldering: 350ç +/-10ç for 5±1 seconds

1 mA

10 cycles

50 M ohms min.

No flashover or insulation breakdown.

100 V DC

90 V AC /one minute

100 m ohms max.* Including FPC conductor resistance

Contact resistance: 100 m ohms max.No damage, cracks, or parts dislocation.

No electrical discontinuity of 1µs or more.Contact resistance: 100 m ohms max.No damage, cracks, or parts dislocation.

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles, 3

directions.

No electrical discontinuity of 1µs. min.Contact resistance: 100 m ohms max.No damage, cracks, or parts dislocation.

Acceleration of 981 m/s2, 6 ms duration, sine half-wave waveform,

3 cycles in each of the 3 axis

Contact resistance: 100 m ohms max.Insulation resistance: 50 M ohms min.No affect on appearance or performance.

96 hours at temperature of 40±2ç and humidity of 90% to 95%.

Contact resistance: 100 m ohms max.Insulation resistance: 50 M ohms min.No damage, cracks, or parts looseness.

No deformation of components affecting performance.

�Materials

�Ordering information

FH 26 W - 51S - 0.3 SHW (05)1 4 52 3 6 7

Part

Contacts

Metalfittings

Insulator

Phosphor bronze

PA

LCP Color: Black

FH26 series: Deep brown

FH26W series: Light brown

Gold plating

Pure tin reflow plating

UL94V-0

Material Finish Remarks

�Specifications

Rating Current rating 0.2A DCVoltage rating 30V AC

Operating temperature range -55 ç to +85ç (Note 1) Operating humidity range Relative humidity 90%

max. (No condensation)

Storage temperature range -10ç to +50ç (Note 2) Storage humidity range Relative humidity 90% max.

Recommended FPC : Thickness: = 0.2±0.03mm gold plated

4. Durability (Insertion/ withdrawal)

5. Vibration

6. Shock

7. Humidity(Steady state)

8. Temperature cycle

9. Resistance to soldering heat

3. Contact resistance

1. Insulation resistance

2. Withstanding voltage

Item Specification Conditions

Note 1: Includes temperature rise caused by current flow.Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range

and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.

Termination type SHW: SMT horizontal staggered mounting type

Specifications

(05)…Gold plating, 5,000 pieces / reel

(10)…Gold plating with nickel barrier, 5,000 pieces / reel

(98)…Gold plating, 500 pieces / reel

(99)…Gold plating with nickel barrier, 500 pieces / reel

Series name: FH

Series No.: 26

Blank: Standard

W: Satisfies halogen-free requirements

(Flame retardance UL94HB).

Number of positions: 13 to 71

Contact pitch: 0.3mm

1

2

3

4

5

6

7


3


B

0.6

0.3

C

0.6

(0.12)

(1.2

5)

(0.3

)

3.2

0.5

11 0.1 0.1

1

0.3

A

(0.12)Number of contacts indicator

(D: FPC insertion slot dimension)

E

3.2

�Connector Dimensions

Notes The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.

Packaged on tape and reel only. Check packaging specification.

Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.

After reflow, the terminal plating may change color, however this does not represent a quality issue.

1

2

3

4

All dimensions: mm

Note1 : Embossed tape reel packaging. Order by number of reels.Note2 : ** : Specification. Refer to ordering information.

Part Number FH26-13S-0.3SHW(**)FH26-15S-0.3SHW(**)FH26-17S-0.3SHW(**)FH26-21S-0.3SHW(**)FH26-23S-0.3SHW(**)FH26-25S-0.3SHW(**)FH26-27S-0.3SHW(**)FH26-29S-0.3SHW(**)FH26-31S-0.3SHW(**)FH26-33S-0.3SHW(**)FH26-35S-0.3SHW(**)FH26-37S-0.3SHW(**)FH26-39S-0.3SHW(**)FH26-41S-0.3SHW(**)FH26-45S-0.3SHW(**)FH26-51S-0.3SHW(**)FH26-55S-0.3SHW(**)FH26-57S-0.3SHW(**)FH26-61S-0.3SHW(**)FH26-71S-0.3SHW(**)

580-0209-3-**580-0218-4-**580-0217-1-**580-0207-8-**580-0203-7-**580-0208-0-**580-0204-0-**580-0216-9-**580-0214-3-**580-0210-2-**580-0205-2-**580-0224-7-**580-0201-1-**580-0206-5-**580-0211-5-**580-0200-9-**580-0221-9-**580-0212-8-**580-0213-0-**580-0202-4-**

1315172123252729313335373941455155576171

CL No. Number of Contacts5.46.06.67.88.49.09.610.210.811.412.012.613.213.815.016.818.018.619.822.8

A3.03.64.25.46.06.67.27.88.49.09.6

10.210.811.412.614.415.616.217.420.4

B3.64.24.86.06.67.27.88.49.09.6

10.210.811.412.013.215.016.216.818.021.0

C4.234.835.436.637.237.838.439.039.6310.2310.8311.4312.0312.6313.8315.6316.8317.4318.6321.63

D4.95.56.17.37.98.59.19.710.310.911.512.112.713.314.516.317.518.119.322.3

E

Part Number FH26W-13S-0.3SHW(**)FH26W-15S-0.3SHW(**)FH26W-17S-0.3SHW(**)FH26W-19S-0.3SHW(**)FH26W-21S-0.3SHW(**)FH26W-23S-0.3SHW(**)FH26W-25S-0.3SHW(**)FH26W-27S-0.3SHW(**)FH26W-29S-0.3SHW(**)FH26W-31S-0.3SHW(**)FH26W-33S-0.3SHW(**)FH26W-35S-0.3SHW(**)FH26W-37S-0.3SHW(**)FH26W-39S-0.3SHW(**)FH26W-41S-0.3SHW(**)FH26W-45S-0.3SHW(**)FH26W-51S-0.3SHW(**)FH26W-57S-0.3SHW(**)FH26W-61S-0.3SHW(**)FH26W-71S-0.3SHW(**)

580-2401-1-**580-2402-4-**580-2403-7-**580-2437-9-**580-2404-0-**580-2405-2-**580-2406-5-**580-2400-9-**580-2407-8-**580-2408-0-**580-2409-3-**580-2410-2-**580-2411-5-**580-2412-8-**580-2413-0-**580-2414-3-**580-2415-6-**580-2417-1-**580-2418-4-**580-2419-7-**

1315171921232527293133353739414551576171

CL No. Number of Contacts5.46.06.67.27.88.49.09.610.210.811.412.012.613.213.815.016.818.619.822.8

A3

3.64.24.85.46.06.67.27.88.49.09.6

10.210.811.412.614.416.217.420.4

B3.64.24.85.46.06.67.27.88.49.09.6

10.210.811.412.013.215.016.818.021.0

C4.234.835.436.036.637.237.838.439.039.6310.2310.8311.4312.0312.6313.8315.6317.4318.6321.63

D4.95.56.16.77.37.98.59.19.710.310.911.512.112.713.314.516.318.119.322.3

E


4


(0.5

5:M

etal

mas

k)(0

.65:

Met

al m

ask)

(0.23:Metal mask)

(0.2

)

(0.4

5)

2.15

±0.

050.

8±0.

05

0.2±

0.05

(0.23:Metal mask)

0.95

±0.

05

0.6±0.05

0.5±0.05

0.4±0.05

(0.3:Metal mask)

(0.7

:Met

al m

ask)

0.6±0.05

0.3±0.05(3

.6)

0.65

±0.

05

0.3±0.03

Outline ofthe connector

B±0.05

C±0.05

0.3±0.03

Recommended metal mask thickness: t=0.1

�Recommended PCB mounting pattern and metal mask dimensions

0.6±0.07

(0.05) (0.15)

0.6±0.07

M

(0.2)(0.07)

0.6±0.02

B±0.03

0.3±0.07

H

C±0.03

3.5

MIN

.(S

tiffe

ner)

2.5±

0.3

F±0.05

0.3±0.07

R0.2 MAX 0.3±

0.1

0.3±0.02 0.2±0.031±

0.1

1.1±

0.1

2.1±

0.1

2.25

±0.

1

0.3+0.04-0.03

0.3+0.04-0.03

0.1±0.02

(2.5

)(0

.5)

(0.15)

(0.2)

1

AB

1±0.

11.

1±0.

1

0±0.

03

πR

ELAT

IVE

PO

SITI

ON

S

OF

POIN

T-A

dnd

B

(Lead plated 0.1 MAX)�Recommended FPC Dimensions Detail H

Dimention M must be 0.5mm minimum when the stiffener is shorter than 3.5 min.1

All dimensions: mm

Part Number

FH26-13S-0.3SHW(**)FH26-15S-0.3SHW(**)FH26-17S-0.3SHW(**)FH26-21S-0.3SHW(**)FH26-23S-0.3SHW(**)FH26-25S-0.3SHW(**)FH26-27S-0.3SHW(**)FH26-29S-0.3SHW(**)FH26-31S-0.3SHW(**)FH26-33S-0.3SHW(**)FH26-35S-0.3SHW(**)FH26-37S-0.3SHW(**)FH26-39S-0.3SHW(**)FH26-41S-0.3SHW(**)FH26-45S-0.3SHW(**)FH26-51S-0.3SHW(**)FH26-55S-0.3SHW(**)FH26-57S-0.3SHW(**)FH26-61S-0.3SHW(**)FH26-71S-0.3SHW(**)

580-0209-3-**580-0218-4-**580-0217-1-**580-0207-8-**580-0203-7-**580-0208-0-**580-0204-0-**580-0216-9-**580-0214-3-**580-0210-2-**580-0205-2-**580-0224-7-**580-0201-1-**580-0206-5-**580-0211-5-**580-0200-9-**580-0221-9-**580-0212-8-**580-0213-0-**580-0202-4-**

1315172123252729313335373941455155576171

CL No.Number of Contacts

3.03.64.25.46.06.67.27.88.49.09.6

10.210.811.412.614.415.616.217.420.4

B

3.64.24.86.06.67.27.88.49.09.610.210.811.412.013.215.016.216.818.021.0

C

4.24.85.46.67.27.88.49.09.610.210.811.412.012.613.815.616.817.418.621.6

F Part Number

FH26W-13S-0.3SHW(**)FH26W-15S-0.3SHW(**)FH26W-17S-0.3SHW(**)FH26W-19S-0.3SHW(**)FH26W-21S-0.3SHW(**)FH26W-23S-0.3SHW(**)FH26W-25S-0.3SHW(**)FH26W-27S-0.3SHW(**)FH26W-29S-0.3SHW(**)FH26W-31S-0.3SHW(**)FH26W-33S-0.3SHW(**)FH26W-35S-0.3SHW(**)FH26W-37S-0.3SHW(**)FH26W-39S-0.3SHW(**)FH26W-41S-0.3SHW(**)FH26W-45S-0.3SHW(**)FH26W-51S-0.3SHW(**)FH26W-57S-0.3SHW(**)FH26W-61S-0.3SHW(**)FH26W-71S-0.3SHW(**)

580-2401-1-**580-2402-4-**580-2403-7-**580-2437-9-**580-2404-0-**580-2405-2-**580-2406-5-**580-2400-9-**580-2407-8-**580-2408-0-**580-2409-3-**580-2410-2-**580-2411-5-**580-2412-8-**580-2413-0-**580-2414-3-**580-2415-6-**580-2417-1-**580-2418-4-**580-2419-7-**

1315171921232527293133353739414551576171

CL No.Number of Contacts

3.03.64.24.85.46.06.67.27.88.49.09.610.210.811.412.614.416.217.420.4

B

3.64.24.85.46.06.67.27.88.49.09.610.210.811.412.013.215.016.818.021.0

C

4.24.85.46.06.67.27.88.49.09.6

10.210.811.412.012.613.815.617.418.621.6

F


5


�Recommended FPC Construction

1. Using Single-sided FPC Material Name

Covering film layer.

Cover adhesive

Surface treatment

Copper foil

Base adhesive

Base film

Reinforcement material adhesive

Stiffener

Polyimide 1 mil thick.

1µm to 5µm Nickel underplated0.2µm Gold plated

Cu 1/2oz

Thermosetting adhesive

Polyimide 1 mil thick



Total

25

25

3

35

25

25

40

75

203

Material Thickness (µm)

2. Using Double-sided FPCMaterial Name

Back side

Covering layer film

Cover adhesive

Surface treatment

Through-hole copper

Copper foil

Base adhesive

Base film

Base adhesive

Copper foil

Cover adhesive

Covering layer film

Reinforcement material adhesive

Stiffener


1µm to 5µm Nickel underplated0.2µm Gold plated

Cu

Cu 1/2oz




Cu 1/2oz





Total

25

25

3

15

18

18

25

18

18

25

25

25

25

197

Material Thickness (µm)

�To prevent release of the FPC due to it's bending, use of double sided FPC with copper foil on the back side is NOT RECOMMENDED.

�Contact FPC manufacturer for specific details.

Back side

Connecting side

Connecting side

1. This specification is a recommendation for the construction of the FH26 Series FPC and FFC (t=0.2 ± 0.03).2. For details about the construction, please contact the FPC/FFC manufacturers.

3. Precautions


6


(L : INSIDE)

(M : OUTSIDE)

(Ø13

)

(Ø38

0)

(Ø80

)

Lead section (400mm min.)End section Mounting section

Connectors

Top cover tapeEmbossed carrier tapeBlank section Blank section

(10 pockets min.) (10 pockets min.)

Unreeling direction

�Reel Dimensions

�Packaging Specification�Embossed Carrier Tape Dimensions

(Tape width of 24mm max.)�Embossed Carrier Tape Dimensions

(Tape width of 32mm min.)

Unreeling directionFlat surface, for placement with automatic equipment

(1.6)

(0.3)

4±0.1 2±0.15 8±0.1

1.75

±0.

1J±

0.1

G±

0.3(K)

(1.25)

(4.55)

(3.05)

Ø1.5

+0.1

0Flat surface, for placement with automatic equipment

Unreeling direction

(1.6)

(0.3) 1.75

±0.

1J±

0.1

G±

0.3

H±

0.1(K

)

(1.25)

(4.55)

(3.05)

Ø1.5

+0.1

0

1.5+0.1 0 1.7

+0.

15 0


7


�Recommended Temperature Profile

HRS test conditionsSolder method :Reflow, IR/hot airEnvironment :Room airSolder composition :Paste, 96.5%Sn/3.0%Ag/0.5%Cu

(Senju Metal Industry, Co., Ltd.'s Part Number: M705-221CM5-32-10.5)

Test board :Glass epoxy 25mm∞50mm∞0.8mm thickLand dimensions :0.3mm∞0.65mm, 0.3mm∞0.8mmMetal mask :0.23∞0.55∞0.1mm thick,

0.23∞0.65∞0.1mm thick

The temperature profiles are based on the above conditions.In individual applications the actual temperature may vary,depending on solder paste type, volume/thickness and boardsize/thickness. Consult your solder paste and equipmentmanufacturer for specific recommendations.

MAX 250ç

Start

(ç)

Time (Seconds)

60

25ç (60sec.) (60sec.)90 sec. to 120 sec.

Preheating Soldering0

50

100

150150ç

200ç

230ç

200

250

120

Tem

pera

ture

All dimensions: mm

Part Number FH26-13S-0.3SHW(**)FH26-15S-0.3SHW(**)FH26-17S-0.3SHW(**)FH26-21S-0.3SHW(**)FH26-23S-0.3SHW(**)FH26-25S-0.3SHW(**)FH26-27S-0.3SHW(**)FH26-29S-0.3SHW(**)FH26-31S-0.3SHW(**)FH26-33S-0.3SHW(**)FH26-35S-0.3SHW(**)FH26-37S-0.3SHW(**)FH26-39S-0.3SHW(**)FH26-41S-0.3SHW(**)FH26-45S-0.3SHW(**)FH26-51S-0.3SHW(**)FH26-55S-0.3SHW(**)FH26-57S-0.3SHW(**)FH26-61S-0.3SHW(**)FH26-71S-0.3SHW(**)

580-0209-3-**580-0218-4-**580-0217-1-**580-0207-8-**580-0203-7-**580-0208-0-**580-0204-0-**580-0216-9-**580-0214-3-**580-0210-2-**580-0205-2-**580-0224-7-**580-0201-1-**580-0206-5-**580-0211-5-**580-0200-9-**580-0221-9-**580-0212-8-**580-0213-0-**580-0202-4-**

1315172123252729313335373941455155576171

7.57.57.57.57.57.57.511.511.511.511.511.511.511.511.511.514.214.214.220.2

----------------------------------------------------------------

28.428.428.440.4

1616161616161624242424242424242432323244

5.66.26.88.08.69.29.8

10.411.011.612.212.813.414.015.217.018.218.820.023.0

17.417.417.417.417.417.417.425.425.425.425.425.425.425.425.425.433.433.433.445.4

21.421.421.421.421.421.421.429.429.429.429.429.429.429.429.429.437.437.437.449.4

CL No. Number of Contacts JHG K L M

Part Number FH26W-13S-0.3SHW(**)FH26W-15S-0.3SHW(**)FH26W-17S-0.3SHW(**)FH26W-19S-0.3SHW(**)FH26W-21S-0.3SHW(**)FH26W-23S-0.3SHW(**)FH26W-25S-0.3SHW(**)FH26W-27S-0.3SHW(**)FH26W-29S-0.3SHW(**)FH26W-31S-0.3SHW(**)FH26W-33S-0.3SHW(**)FH26W-35S-0.3SHW(**)FH26W-37S-0.3SHW(**)FH26W-39S-0.3SHW(**)FH26W-41S-0.3SHW(**)FH26W-45S-0.3SHW(**)FH26W-51S-0.3SHW(**)FH26W-57S-0.3SHW(**)FH26W-61S-0.3SHW(**)FH26W-71S-0.3SHW(**)

580-2401-1-**580-2402-4-**580-2403-7-**580-2437-9-**580-2404-0-**580-2405-2-**580-2406-5-**580-2400-9-**580-2407-8-**580-2408-0-**580-2409-3-**580-2410-2-**580-2411-5-**580-2412-8-**580-2413-0-**580-2414-3-**580-2415-6-**580-2417-1-**580-2418-4-**580-2419-7-**

1315171921232527293133353739414551576171

7.57.57.57.57.57.57.57.511.511.511.511.511.511.511.511.511.514.214.220.2

--------------------------------------------------------------------

28.428.440.4

1616161616161616242424242424242424323244

5.66.26.87.48.08.69.29.8

10.411.011.612.212.813.414.015.217.018.820.023.0

17.417.417.417.417.417.417.417.425.425.425.425.425.425.425.425.425.433.433.445.4

21.421.421.421.421.421.421.421.429.429.429.429.429.429.429.429.429.437.437.449.4

CL No. Number of Contacts JHG K L M


8


�Operation and Precautions

Operation

1.FPC insertion procedure. Connector installed on the board.Lift up the actuator. Use thumb or index finger.1

2.FPC removalLift up the actuator. Carefully withdraw theFPC.

1

Fully insert the FPC in the connector parallel tomounting surface, with the exposed conductivetraces facing down.

2

Rotate down the actuator until firmly closed. It iscritical that the inserted FPC is not moved andremains fully inserted.

3

FPC conductorsurface (Bottom side)


9


Precautions

Exercise care when handling connectors. Follow recommendations given below.

PC board flexingSPC board connector mounting area

The connectors are straight within 0.1 mm max.Make sure that the PC board connector mounting area flatness can accept the connector terminals withoutcausing any failure of the solder joints.

SHandling before mounting on PCB Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED.

SPC Board handling Exercise caution when handling boards with the connectors installed. Do not apply any forces affectingsoldered joints.

Precautions When Inserting or Coupling FPC

Pay attention to the following points when inserting FPC. SActuator operation

Do not apply excessive force when opening the actuator prior to FPC insertion. When opening make surethat the force is applied only to the actuator itself, avoiding touching of the contacts.

Connector

PCB

Damage

Assure free rotation of the actuator

1

Axis of rotation2Axis of rotation

Damage to the contacts

Actuator


10


Precautions

The actuator will rotate 135 degreesmaximum. Do not apply force to rotatefurther. (1N max.)

3

When operating the actuator, do so at thecenter portion.

4

135˚

As illustrated, do not attempt removal or re-positioning of the actuator.

5

SFPC InsertionqThe FPC should be aligned parallel with the board surface and perpendicular with the connector (asshown), then completely inserted.

To assure correct electrical and mechanical connection do not insert FPC at angle. It must be fully inserted.

Make sure that the FPC is NOT MOVED during the closing of the actuator.

Perpendicular withthe connector


11


Precautions

SVerification of the fully closed actuator.The actuator should be fully closed (as illustrated) and the FPC held firmly in the connector. Do not press against the actuator when is fully closed. Max force applied to the fully closed actuator shouldnot exceed 1 N.

*To avert insertion of the FPC on an angle, consideration should be given to securing FPC insertion spaceat the time of board layout. Insertion will be difficult when the FPC is too short.

*Contact the FPC manufacturer for information about the bending specifications.

Routing the FPC (FPC fully inserted/ actuator closed) SFPC Load

Do not apply force in excess of 0.05N/pin max. in the upward direction (as illustrated). Do not bend theFPC too close to the actuator.

Load: 0.05N/pin max.

SFPC InsertionwDo not insert the FPC at any angle from above.

As illustrated, angle insertion may cause electrical discontinuity when the FPC is deflected in use.


12


Precautions

Removing the FPCRotate the actuator to the open position (maximum open angle of 135°). Carefully withdraw the FPC.

Other PrecautionsSHand Soldering Precautions

When hand soldering: Do not perform reflow or hand soldering with the FPC inserted in the connector. Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. Do not use excessive amount of solder or flux compounds.Operation of the actuator and contacts may be affected by excessive amounts of solder or fluxcompounds.

135˚

123

The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements.

5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPANPHONE: 81-3-3491-5300, FAX: 81-3-3495-5230http://www.hirose.comhttp://www.hirose-connectors.com

®


0.3mm contact pitch, 1mm above the board, flexible printed circuit … · 2019. 10. 12. · 3 fh26...

Documents

the development of a 0.3mm pitch csp assembly … ·...

step stencil design when 01005 - electronics manufacturing...

diversified 1mm+ sf portfolio

global semiconductor alliance - wafer level packaging ·...

1mm pitch wire-to-board connectors supporting...

control release anesthetics to enable an integrated ... ·...

1mm needle rollers and cylindrical rollers

certification & classification standards suite 0.3mm …

karcher filters -...

tissue matrix options in breast reconstruction · 2018. 12....

positioning measurement system - hiwin.com · pdf filei...

0.3mm contact pitch, 1mm above the board, flexible printed...

mk-38 main gun director -...

catalogue · 2019. 5. 20. · fuji perforating strips code...

metric seminar from bossard · metric system multiples &...

v8 - om autoelectro · wave soldering insert pin, no...

emmc nandrive 85vm series product briefpackage options and...

high speed transmission, 1mm pitch small interface...

1mm e-portfolio

0.5 mm and 1 mm pitch fpc/ffc connectors...2018/05/09 ·...