1-ponteggi ferro 2016 ok - mail.frigerio.infomail.frigerio.info/doc/catalogo 2016 pdf - ing/1... ·...
Post on 14-Aug-2020
1 Views
Preview:
TRANSCRIPT
CONTENTS
PROFESSIONAL STEEL SCAFFOLD RANGE
STEEL SCAFFOLDS
Pag. 03Art. INDOOR
Pag. 04Art. POKER
Pag. 06Art. POKER HD
Pag. 08Art. ORIO
Pag. 10Art. ORIO HD
Pag. 12Art. EXPORT
Pag. 16Art. EXPORT 3001
Pag. 18Art. SUPERLUNGO
Pag. 22Art. SUPERLUNGO 3001
Pag. 24GENERIC ACCESSORIES for steel scaffolds
The products may not come under all the certification marks above
1Recommended retail prices - VAT excluded.
Pag. 14Art. EXPORT HD
Ste
el S
caff
olds
Pag. 58P.P.E. - Personal protective equipment
FRIGERIO OVERALL SAFETY
REGULATIONS
EN 287/2/2REGULATIONS
EN 1004REGULATIONS
D.L. 81
These steel scaffolds are the outcome of thirty years of experience acquired by Frigerio in support of those who use these products at work each day. Available in an incredible variety of solutions and configurations able to suit the most different operating requirements, Frigerio steel scaffolds range from 1.75 to as much as 16.06 meters in total height, from 1.30x0.60 to 2.50x1.20 meters at the base and can be efficiently used in all situations.
Tailor-made for people who work
Frigerio steel scaffolds contain high-quality aluminium alloys. The machining processes are performed in the production facility using the most modern and advanced technologies, such as welding robots and numerical control machines. To guarantee reliability over time, every article is subjected to stringent tests in the company prior to delivery. Modularity is the principle upon which these scaffolds are based, so the structures can be increased in height at any time to suit job requirements. Easy assembly is another key feature.
Sturdy, strongly-built and versatile
All Frigerio steel scaffolds, i.e. Poker, Poker HD, Orio, Orio HD, Export, Export HD, Export 3001, Superlungo and Superlungo 3001, are designed to allow operators to work in the utmost safety. The scaffolds are equipped with a final protective section, easily recognized thanks to its gold colour. The rungs are made from tough rectangular-section metal featuring deep non-slip scoring to guarantee a firm foothold and are positioned no more than 30 cm away from each other, just like a vertical ladder. The sections have long diagonal braces which allow the upper elements to be assembled in total safety. The work platforms have trapdoors and anti-lift lock to protect against the wind. The floor surface is in Finnish birch treated with waterproof non-slip film on both sides. Intermediate rails can be positioned every 30 cm, allowing work to always be performed in total safety and in compliance with the relevant standards.
Safety and ergonomics
Pag. 20Art. SUPERLUNGO HD
5 YEARS
FRIGERIO WARRANTY
3,000,000Damage to property and persons
Pag. 02Art. GOLIA
Pag. 02Art. HOBBIT
PRODUCTINSURANCE
PHOBBIT
Article code
PGO PIANO
GOLIA - Mini scaffold for hobby work
2 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
Ste
el S
caff
olds
« Rungs with deep non-slip scoring positioned every 30 cm between uprights
« Sturdy tubing in Ø 32 x 1.5 mm steel section metal
« Uprights with wider base for improved stability and joints with anti-cut and shockproof edging
« Self-supporting steel platform frame
« Can be converted into an 8-step ladder
« Can be pushed like a wheelbarrow by its 2 (two) Ø 80 mm wheels
« Good quality rust-inhibiting epoxy paint coating
« Safe, strong pawl locks. No bolts or screws to tighten
« Heat-shrink wrapping
Ideal for housework. Practical and quick to disassemble and re-assemble. Can be stored in a very small space.Has two stabilizing outrigger bases with wheels and can be converted into a ladder.Easy to manoeuvre even in the tightest spaces. Can be comfortably transported in any type of car.
Base dimensions 1.30 x 0.60 mTotal maximum height 1.75 m
PGOLIA Complete with 1 platform
DescriptionArticle code
PriceEuros
128.00
PGO PIANO Golia platform 27.00
HOBBIT - Mini scaffold for hobby work
Base dimensions 1.37 x 0.68 m Total maximum height 1.75 m
« Rungs with deep non-slip scoring positioned every 30 cm between uprights
« Sturdy tubing in Ø 32 x 1.5 mm steel section metal
« Uprights with wider base for improved stability and joints with anti-cut and shockproof edging
« Self-supporting steel platform frame
« 3 (three) Ø 18 mm steel braces
« Can be pushed like a wheelbarrow by its 2 (two) Ø 80 mm wheels
« Silver-colour good quality rust-inhibiting galvanizing treatment
« Safe, strong pawl locks. No bolts or screws to tighten
« Heat-shrink wrapping
Ideal for housework. Practical and quick to disassemble and re-assemble. Can be stored in a very small space. Easy to manoeuvre even in the tightest spaces. Can be comfortably transported in any type of car.
Complete with 1 platform
Description PriceEuros
104.00
Golia platform 27.00
1370
680
1125
1750
510
100 kg
5 yearsCAPACITY
WARRANTY
100 kg
5 yearsCAPACITY
WARRANTY
100%100%100%
100%100%100%
3,000,000Damage to property and persons
3,000,000Damage to property and persons
PRODUCTINSURANCE
PRODUCTINSURANCE
« Rungs with deep non-slip scoring positioned every 27 cm between uprights
« Sturdy tubing in Ø 38 x 1.5 mm steel section metal
« Platform with trapdoor allowing user to climb up from inside, and regulation toe-boards
« Can fold up in the "scissor" mode so as to pass through doorways
« Upper section with complete protection
« Safe, strong pawl locks. No bolts or screws to tighten
« Silver-colour good quality rust-inhibiting galvanizing treatment
Professional scaffold recommended for indoor work. Reduced base dimensions allow it to pass through doorways without having to disassemble the platform.The ladder component (optional) allows the user to work at significant differences in height, like indoor staircases.
Base dimensions 1.60 x 0.67 m Total maximum height 2.44 m
PIN SPSS
Height to platform
m
Article code
1.41
Scaffold height
m
2.44
Working height
m
3.41
PIN CAMPATABPIN CAMT
DescriptionArticle code
Base section (m 1.62)Top section with railing
Platform with trapdoor and toe-board:
PIN PIANO BPIN PIANO CPOK BASE
Type B galvanized iron frame plywood surfaceType C aluminium frame and plywood surfaceINDOOR/POKER two-piece base, complete with wheels
POK ELSCL ST Ladder element, additional charge
INDOOR - Professional
Platform
num
-- 311.00
PIN SPDL 1.412.44 3.41 -- 347.00
PINDOOR complete 1.412.44 3.41 1 517.00
Outriggers
type B
--
YES
YES
122.0098.00
170.00220.00
93.0070.00
Price
Euros
Price
Euros
3Recommended retail prices - VAT excluded.
2200 kg/m
5 years
CAPACITYWARRANTY
High-strength non-slip rungs!
Rectangular-section rungs with deep non-slip scoring and optimized shape.Ensure improved frame rigidity and optimum weld tightness.
Ø 100 mm rubber wheels
Push-fit wheel with pressed steel core and BLACK rubber tyre.
Total height: + 1.01 m.
Height to platform
Useful working height+ 2 m
REGULATIONS
D.L. 81S
teel
Sca
ffol
ds
(without platform)(without outriggers)
100%100%100%
3,000,000Damage to property and persons
PINDOORSS 1.412.44 3.41 1 481.00--(with platform)(without outriggers)((without platform)(with outriggers)
Photo of PINDOORSS with platform and without outriggers
PRODUCTINSURANCE
Base dimensions 1.60 x 0.80 m Total maximum height 6.78 m
« Rungs installed every 27 cm allow each upright to be used like a real vertical ladder and to position the platforms and intermediate railings with the utmost ease
« Sturdy tubing in Ø 38 x 1.5 mm steel section metal
« Can fold up in the "scissor" mode so as to pass through doorways (only with standard base)
« Gold coloured galvanized protective top section
« Safe, strong pawl locks. No bolts or screws to tighten
« High-density good quality rust-inhibiting galvanizing treatment
« Frigerio brand name and year of manufacture on each scaffold
« Manual containing assembly, use and disassembly instructions
So quick and simple to assemble, it can be set up by one single person, who can erect 1 m of scaffolding per minute. Reduced dimensions make it ideal for every situation, both indoors and outdoors. Supplied with short outriggers to ensure safe conditions even when the scaffold is moved.
POKER
4 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
High-strength non-slip rungs!Rectangular-section rungs with deep non-slip scoring and optimized shape.Ensure improved frame rigidity and optimum weld tightness.
2200 kg/m
5 years
CAPACITYWARRANTY
REGULATIONS
D.L. 81
Ste
el S
caff
olds
On request: See P.P.E. on page 58
D.L. 81 of 09/04/2008ANCHORAGE every 3.60 meters is MANDATORY -
m 5.13
m 3.51
m 1.90
m 2.71
m 4.32
Numerical control-type calibrated rounded couplings with reinforcing edgingAbsolutely guaranteed coupling without the possibility of denting during use or transport.
100%100%100%
3,000,000Damage to property and persons
m 6.78
m 5.97
POKER-04POKER-03
POK1/2CAMPOKER-03
POKER-02
POK1/2CAMPOKER-02
POKER-01
POK1/2CAMPOKER-01
KEY : - Anchorage is mandatory
Photo of a complete POKER-02 scaffold
PRODUCTINSURANCE
Poker POKER - Professional Scaffolds
5Recommended retail prices - VAT excluded.
POKER - Optional ACCESSORIES
Ste
el S
caff
olds
RIGID modular base comprising 4 components with Ø 150 mm. black rubber wheels. Improves the stability and rigidity of the scaffold and allows screw outriggers to be used (optional)
Sill
Outriggers short outriggers
1.60
0.80
Terminal upright
Railing sillRailing sillRailing sill
Trapdoor
to platforms
Upright
lock fastened Anti-lift
POK SPALLA
POK SPALLAT
POK DAVANZ
Vertical upright with 6 rungs
Terminal vertical upright
Sill
P TIR L
POK DAVPROT
POK BN SR
POK RUOTA
Diagonal brace
Terminal railing frame
Complete base in two pieces without wheels
Ø 100 mm black rubber wheels
POK PIANO BW Platform + toe-board
POK STAFFA Short outrigger
Article codes
m
m
m
40.00
36.00
16.00
6.50
20.00
41.00
13.00
219.00
9.00
7.4
7.2
3.2
1.1
5.3
4.8
1.5
19.0
1.5
2.89 3.70 4.50 5.31 6.12 6.93 7.74
1.90 2.71 3.51 4.32 5.13 5.94 6.75
0.89 1.70 2.50 3.31 4.12 4.93 5.74
POKER-01 POKER-01 POKER-02 POKER-02 POKER-03 POKER-03 POKER-04
0 0 2 2 4 4 6
2 2 2 2 2 2 2
0 2 2 4 4 6 6
4 4 8 8 12 12 16
2 2 2 2 2 2 2
1 1 1 1 1 1 1
4 4 4 4 4 4 4
1 1 1 1 1 1 1
0 0 4 4 4 4 4
Total weight
COMPLETE - total price
59 75 90 107 115 132 141
450.00 574.00 624.00 748.00 762.00 886.00 900.00
POK 1/2 SPAL Vertical half-upright 32.00 3.5 0 2 0 2 0 2 0
POK 1/2 TIR 7.00 0.8 0 4 0 4 0 4 0Diagonal half-brace
POK1/2CAM POK1/2CAM POK1/2CAM
Total price without OUTRIGGERS and without PLATFORM (Art. with code SSP) 231.00 355.00 369.00 493.00 507.00 631.00 645.00
€
€
kg
USEFUL WORKING HEIGHT
OVERALL HEIGHT
HEIGHT TO PLATFORM
POKER - Accessories Kit and Spare parts Kit
POK CAMPATAPOK HD CAMTPOK 1/2 CAM
DescriptionArticle No.
POK PIANO C
PriceEuros
138.00138.00
264.00124.00
Section/complete intermediate section (1.62 m)Section/complete terminal section (gold railing)Complete intermediate half-section (0.81 m)Type C - aluminium frame with surface and toe-boardin treated waterproof, non-slip, stain-proof wood
POK BN SS 93.00Base D.L.81 complete with 4 Ø 100 mm rubber wheels
POK PIANO D 368.00Type D - aluminium frame with surface in fret sheet aluminium and toe-board in treated wood
Price of each/€
POK ELSCL ST 70.00
Price of each/€ Scaffold price supplement €
126.00
POK BASESSCS 219.00
Article code
Price of each/€
POR STAB V 28.00
Article code
Screw levellers/outriggers in galvanized steel for rigid base. Compensate for slopes or differences in level up to 35 cm, with maximum precision
Platform in treated waterproof, non-slip, stain-proof treated Finnish birch wood! Equipped with trapdoor, regulation toe-boards and anti-lift safety device to protect against the wind or accidental lifting.
Ø 100 mm rubber wheelsPush-fit wheel made in Italy with pressed steel core and soft BLACK rubber tyre.
Adapter kit, allowing the scaffold to be used on slopes or differences in level up to 80 cm.
Consists of 2 separate components with extension adjustment locked in place with a steel pin.
Can be applied to the vertical tubes on each side of the scaffold using steel clamps. They can be positioned so as to reduce the size of the scaffold on site.
NOTE. Can only be used with the POK BASESSCS rigid base
Article code
Base dimensions 1.60 x 0.80 mTotal maximum height 6.78 m
« Rungs installed every 27 cm allow each upright to be used like a real vertical ladder and to position the platforms and intermediate railings with the utmost ease
« Sturdy tubing in Ø 38 x 1.5 mm steel section metal
« Can fold up in the "scissor" mode so as to pass through doorways
« Gold coloured galvanized protective top section
« Safe, strong pawl locks. No bolts or screws to tighten
« High-density good quality rust-inhibiting galvanizing treatment
« Frigerio brand name and year of manufacture on each scaffold
« Manual containing assembly, use and disassembly instructions
Natural evolution of the POKER scaffold. Features the same practical, sturdy construction. POKER HD conforms to European standard EN 1004 for non-anchored use. Larger wheels with anti-oscillationcore and outriggers with double adjuster arm for improved stability. Can be adapted to suit different conditions of use and also allow the scaffold to be moved in total safety.
Use instructions according to UNI EN 1004According to EN 1004, the distance between work platforms in non-anchored scaffolds must not exceed 4 m. To conform to the aforementioned European standard, the work platforms must be assembled with regulation intermediate railings. Comply with the indicated configurations with the minimum number of platforms required, as shown in this publication. Non-anchored scaffolds may only be used in compliance with the indications in the instruction manual.
POKER HD
6 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
REGULATIONS
EN 1004
2200 kg/m
5 years
CAPACITYWARRANTY
Ste
el S
caff
olds
On request: See P.P.E. on page 58
m 5.16
m 3.54
m 1.93
m 2.74
m 4.35
m 6.78
m 5.97
WITHOUT ANCHORAGE for indoor and outdoor use Conform to EN 1004
High-strength non-slip rungs!Rectangular-section rungs with deep non-slip scoring and optimized shape. Ensure improved frame rigidity and optimum weld tightness.
Numerical control-type calibrated rounded couplings with reinforcing edgingAbsolutely guaranteed coupling without the possibility of denting during use or transport.
100%100%100%
3,000,000Damage to property and persons
POKER-HD-04POKER-HD-03
POK1/2CAMPOKER-HD-03
POKER-HD-02
POK1/2CAMPOKER-HD-02
POKER-HD-01
POK1/2CAMPOKER-HD-01
Photo of a complete POKER-HD-04 scaffold
PRODUCTINSURANCE
Poker HDPOKER HD - Professional Scaffolds
7Recommended retail prices - VAT excluded.
Ste
el S
caff
olds
Sill
Upright
HD outriggers
Terminal upright
DavanzaleParapettoTerminal upright
Trapdoor
Anti-lift lock
to platformsfastened
1.60
0.80
POK SPALLA
POK SPALLAT
POK DAVANZ
Vertical upright with 6 rungs
Terminal vertical upright
Sill
P TIR L
POK DAVPROT
POK BN SR
POK-HD RUOTA
Diagonal brace
Terminal railing frame
Complete base in two pieces without wheels
Ø 125 mm nylon wheels with red tyres
POK-HD PARS Intermediate railing frame
POK STAFFAHD HD outrigger
Article codes
mt.
mt.
mt.
38.00
27.00
7.4
7.2
3.2
1.1
5.3
4.8
1.5
5.5
4.5
2.92 3.73 4.53 5.34 6.15 6.96 7.77
1.93 2.74 3.54 4.35 5.16 5.97 6.78
0.92 1.73 2.53 3.34 4.15 4.96 5.77
POKER-HD-01 POKER-HD-01 POKER-HD-02 POKER-HD-02 POKER-HD-03 POKER-HD-03 POKER-HD-04
0 0 2 2 4 4 6
2 2 2 2 2 2 2
0 2 2 4 4 6 6
4 4 8 8 12 12 16
2 2 2 2 2 2 2
1 1 1 1 1 1 1
4 4 4 4 4 4 4
0 0 0 0 0 2 2
0 0 4 4 4 4 4
Total weight
COMPLETE - total price
59 75 102 119 127 174 183
490.00 614.00 736.00 860.00 874.00 1,293.00 1,307.00
POK 1/2 SPAL Vertical half-upright 3.5 0 2 0 2 0 2 0
POK 1/2 TIR 0.8 0 4 0 4 0 4 0Diagonal half-brace
POK1/2CAM POK1/2CAM POK1/2CAM
POK PIANO BW Platform + toe-board 219.00 19.5 1 1 1 1 1 2 2
Total price without OUTRIGGERS and without PLATFORM (Art. with code SSP) 271.00 395.00 409.00 533.00 547.00 671.00 685.00
kg
€
€
USEFUL WORKING HEIGHT
OVERALL HEIGHT
OVERALL HEIGHT
POKER HD - Accessories Kit and Spare parts Kit
POK CAMPATAPOK HD CAMTPOK 1/2 CAM
DescriptionArticle code
POK PIANO C
POK BASEHDSS
PriceEuros
138.00138.00
264.00124.00
133.00
Section/complete intermediate section (1.62 m)Section/complete terminal section (gold railing)Complete intermediate half-section (1.81 m)Type C - aluminium frame with surface and toe-board in treated waterproof, non-slip, stain-proof wood
HD Base complete with 4 Ø 125 mm nylon wheels
POK PIANO D 368.00Type D - aluminium frame with surface in fret sheet aluminium and toe-board in treated wood
Platform in treated waterproof, non-slip, stain-proof treated Finnish birch wood! Equipped with trapdoor, regulation toe-boards and anti-lift safety device to protect against the wind or accidental lifting.
Ø 125 mm wheels Wheel made in Italy to EN1004 standards. Push-fit assembly with anti-crushing polyurethane core and RED tyre. Non-marking properties for use on fine flooring.
POK HD PARI 76.00KIT - 2 intermediate railing frames
POK STAFFEHD 108.00KIT - 4 HD outriggers with double arm
POKER HD - Optional ACCESSORIESRIGID modular base in 4 pieces with Ø 150 mm nylon wheels with red tyres. Complies with EN1004 standards. Increases the stability and rigidity of the scaffold and allows screw outriggers to be used (optional)
Price of each/€
POK ELSCL ST 70.00
Article code
Price of each/€ Scaffold price supplement €
102.00
POK BASEHDCC 235.00
Article code
Price of each/€
POR STAB V 28.00
Article code
Screw levellers/outriggers in galvanized steel for rigid base. Compensate for slopes or differences in level up to 35 cm, with maximum precision
Adapter kit, allowing the scaffold to be used on slopes or differences in level up to 80 cm.
Consists of 2 separate components with extension adjustment locked in place with a steel pin.
Can be applied to the vertical tubes on each side of the scaffold using steel clamps. They can be positioned so as to reduce the size of the scaffold on site.
NOTE. Can only be used with the POK BASEHDCC rigid base
40.00
36.00
16.00
6.50
20.00
41.00
23.00
32.00
7.00
Base dimensions 1.80 x 1.00 mTotal maximum height 8.98 m
« Rungs installed every 29 cm allow each upright to be used like a real vertical ladder and to position the platforms and intermediate railings with the utmost ease
« Sturdy tubing in Ø 38 x 1.5 mm steel section metal
« Gold coloured galvanized protective top section
« Safe, strong pawl locks. No bolts or screws to tighten
« High-density good quality rust-inhibiting galvanizing treatment
« Frigerio brand name and year of manufacture on each scaffold
« Manual containing assembly, use and disassembly instructions
A working tower of intermediate size, both as to height reached and overall dimensions. It comprises a strong, sturdily built rectangular base formed by four pieces, which can be fitted with screw outriggers (optional) to compensate for up to 35 cm difference in height and allow the entire structure to remain even more stable.
ORIO
8 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
REGULATIONS
D.L. 81
Ste
el S
caff
olds
ORIO-05
Conforms to D.L. 81 of 09/04/2008ANCHORAGE every 3.60 meters is MANDATORY
m 4.67
m 3.21
m 6.13
m 7.53
m 1.75m 2.63
m 4.09
m 5.55
m 7.01
ORIO-01 ORIO-02 ORIO-03 ORIO-04ORIO-01
2200 kg/m
5 yearsCAPACITYWARRANTY
On request: See P.P.E. on page 58
High-strength non-slip rungs!Rectangular-section rungs with deep non-slip scoring and optimized shape. Ensure improved frame rigidity and optimum weld tightness.
Numerical control-type calibrated rounded couplings with reinforcing edgingAbsolutely guaranteed coupling without the possibility of denting during use or transport.
100%100%100%
3,000,000Damage to property and persons
POR1/2CAM
ORIO-02
POR1/2CAM
ORIO-03
POR1/2CAM
ORIO-04
POR1/2CAM
m 8.98m 8.41
ORIO-06ORIO-05
POR1/2CAM
KEY : - Anchorage is mandatory
Photo of a complete ORIO-04 scaffold
PRODUCTINSURANCE
OrioORIO - Professional Scaffolds
9Recommended retail prices - VAT excluded.
Terminal uprightSillRailing
to platforms
Sill
Upright
lock fastened Anti-lift
SHORT outriggers
1.80
1.00
TrapdoorS
teel
Sca
ffol
ds
ORIO - Accessories Kit and Spare parts Kit
POR CAMPATAPOR HD CAMTPOR 1/2 CAM
DescriptionArticle code
POR PIANOC
PriceEuros
166.00166.00
281.00144.00
Section/complete intermediate section (1.45 m)Section/complete terminal section (gold railing)Complete intermediate half-section (0.88 m)Type C - aluminium frame with surface and toe-board in treated waterproof, non-slip, stain-proof wood
POR BN SS 203.00RIGID base - D.L.81 in four parts. Equipped with 4 Ø 150 mm black rubber wheels with brake
POR PIANOD 394.00Type D - aluminium frame with surface in fret sheet aluminium and toe-board in treated wood
ORIO - Optional ACCESSORIES
Price of each/€
POK ELSCL ST 70.00
Article code
Price of each/€
POR STAB V 28.00
Article code
Screw levellers/outriggers in galvanized steel for rigid base. Compensate for slopes or differences in level up to 35 cm, with maximum precision
Platform in treated waterproof, non-slip, stain-proof treated Finnish birch wood! Equipped with trapdoor, regulation toe-boards and anti-lift safety device to protect against the wind or accidental lifting.
Ø 150 mm wheels Wheel on plate with galvanized steel core and tyre in soft BLACK rubber.(Only for conformity to D.L.81)
Adapter kit, allowing the scaffold to be used on slopes or differences in level up to 80 cm
Consists of 2 separate components with extension adjustment locked in place with a steel pin
Can be applied to the vertical tubes on each side of the scaffold using steel clamps. They can be positioned so as to reduce the size of the scaffold on site
POR SPALLA
POR SPALLAT
POR DAVANZ
Vertical upright with 5 rungs
Terminal vertical upright
Sill
P TIR L
POR DAVPROT
POR BN SR
POR RUOTA
Diagonal brace
Terminal railing frame
Complete base without wheels
Ø 150 mm black rubber wheels
POK STAFFA Short outrigger
Article codes
m
m
m
49.00
45.00
21.00
6.50
25.00
99.00
26.00
9.00
8.0
7.2
3.2
1.1
5.7
13.0
1.6
1.5
2.72 3.60 4.18 5.06 5.64 6.52 7.10
1.75 2.63 3.21 4.09 4.67 5.55 6.13
0.72 1.60 2.18 3.06 3.64 4.52 5.10
ORIO-01 ORIO-01 ORIO-02 ORIO-02 ORIO-03 ORIO-03 ORIO-04
0 0 2 2 4 4 6
2 2 2 2 2 2 2
0 2 2 4 4 6 6
4 4 8 8 12 12 16
2 2 2 2 2 2 2
1 1 1 1 1 1 1
4 4 4 4 4 4 4
0 0 0 0 4 4 4
Total weight
COMPLETE total price77 94 104 120 136 153 163
610.00 754.00 776.00 920.00 978.00 1,122.00 1,144.00
POR 1/2SPAL Vertical half-upright 37.00 3.6 0 2 0 2 0 2 0
POR 1/2 TIR 7.00 0.8 0 4 0 4 0 4 0Diagonal half-brace
POR1/2CAM POR1/2CAM POR1/2CAM
Total price without OUTRIGGERS and without PLATFORM (Art. with code SSP) 369.00 513.00 535.00 679.00 701.00 845.00 867.00
7.98 8.50
7.01 7.53
5.98 6.50
ORIO-04 ORIO-05
6 8
2 2
8 8
16 20
2 2
1 1
4 4
4 4
180 189
1,288.00 1,310.00
2 0
4 0
POR1/2CAM
1,011.00 1,033.00
POR PIANO BW Platform + toe-board 241.00 28.0 1 1 1 1 1 1 1 1 1
€
€
kg
USEFUL WORKING HEIGHT
OVERALL HEIGHT
HEIGHT TO PLATFORM
9.38 9.95
8.41 8.98
7.38 7.95
ORIO-05 ORIO-06
8 10
2 2
10 10
20 24
2 2
1 1
4 4
4 4
206 216
1,454.00 1,476.00
2 0
4 0
POR1/2CAM
1,177.00 1,199.00
1 1
Base dimensions 1.80 x 1.00 mTotal maximum height 8.98 m
« Rungs installed every 29 cm allow each upright to be used like a real vertical ladder and to position the platforms and intermediate railings with the utmost ease
« Sturdy tubing in Ø 38 x 1.5 mm steel section metal
« Gold coloured galvanized protective top section
« Safe, strong pawl locks. No bolts or screws to tighten
« High-density good quality rust-inhibiting galvanizing treatment
« Frigerio brand name and year of manufacture on each scaffold
« Manual containing assembly, use and disassembly instructions
Accessorized configuration of ORIO comprising all the functional characteristics of this latter, ORIO HD also includes work platforms with intermediate railings, outriggers and anti-crushing wheels, thereby conforming to European standard EN 1004 for non-anchored use up to a height of 8.50 m.
ORIO HD
10 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
2200 kg/m
5 years
CAPACITYWARRANTY
REGULATIONS
EN 1004Use instructions according to EN 1004According to EN 1004, the distance between work platforms in non-anchored scaffolds must not exceed 4 m. To conform to the aforementioned European standard, the work platforms must be assembled with regulation intermediate railings. Comply with the indicated configurations with the minimum number of platforms required, as shown in this publication. Non-anchored scaffolds may only be used in compliance with the indications in the instruction manual.
Ste
el S
caff
olds
On request: See P.P.E. on page 58
m 4.67
m 3.21
m 6.13
m 7.53
m 1.75m 2.63
m 4.09
m 5.55
m 7.01
WITHOUT ANCHORAGE for indoor and outdoor use - Conform to EN 1004
m 8.98m 8.41
High-resistance non-slip rungs!Rectangular-section rungs with deep non-slip scoring and optimized shape. Ensure improved frame rigidity and optimum weld tightness.
Numerical control-type calibrated rounded couplings with reinforcing edgingAbsolutely guaranteed coupling without the possibility of denting during use or transport.
100%100%100%
3,000,000Damage to property and persons
ORIO-HD-05ORIO-HD-01 ORIO-HD-02 ORIO-HD-03 ORIO-HD-04ORIO-HD-01
POR1/2CAM
ORIO-HD-02
POR1/2CAM
ORIO-HD-03
POR1/2CAM
ORIO-HD-04
POR1/2CAMORIO-HD-06
ORIO-HD-05
POR1/2CAM
Photo of a complete ORIO-HD-05 scaffold
PRODUCTINSURANCE
OrioORIO HD - Professional Scaffolds
11Recommended retail prices - VAT excluded.
Ste
el S
caff
olds
POR SPALLA
POR SPALLAT
POR DAVANZ
Vertical upright with 5 rungs
Terminal vertical upright
Sill
P TIR L
POR DAVPROT
POR BN SR
POR HD RUOTA
Diagonal brace
Terminal railing frame
Complete base without wheels
Ø 150 mm nylon wheels
POR PARS Intermediate railing frame
POK STAFFAHD HD outrigger
Article codes
m
m
m
49.00
45.00
21.00
6.50
25.00
99.00
30.00
40.00
27.00
8.0
7.2
3.2
1.1
5.7
13.0
1.6
5.8
4.5
2.72 3.60 4.18 5.06 5.64 6.52 7.10
1.75 2.63 3.21 4.09 4.67 5.55 6.13
0.72 1.60 2.18 3.06 3.64 4.52 5.10
ORIO-HD-01 ORIO-HD-01 ORIO-HD-02 ORIO-HD-02 ORIO-HD-03 ORIO-HD-03 ORIO-HD-04
0 0 2 2 4 4 6
2 2 2 2 2 2 2
0 2 2 4 4 6 6
4 4 8 8 12 12 16
2 2 2 2 2 2 2
1 1 1 1 1 1 1
4 4 4 4 4 4 4
0 0 0 0 0 0 2
0 0 0 0 4 4 4
Total weight
COMPLETE - total price77 94 104 120 148 165 214
626.00 770.00 792.00 936.00 1,066.00 1,210.00 1,553.00
POR 1/2SPAL Vertical half-upright 37.00 3.6 0 2 0 2 0 2 0
POR 1/2 TIR 7.00 0.8 0 4 0 4 0 4 0Diagonal half-brace
POR1/2CAM POR1/2CAM POR1/2CAM
Total price without OUTRIGGERS and without PLATFORM (Art. with code SSP) 385.00 529.00 551.00 695.00 717.00 861.00 883.00
7.98 8.50
7.01 7.53
5.98 6.50
ORIO-HD-04 ORIO-HD-05
6 8
2 2
8 8
16 20
2 2
1 1
4 4
2 2
4 4
231 241
1,697.00 1,719.00
2 0
4 0
POR1/2CAM
1,027.00 1,049.00
POR PIANO BW Platform + toe-board 241.00 28.0 1 1 1 1 1 1 2 2 2
€
€
kg
USEFUL WORKING HEIGHT
OVERALL HEIGHT
HEIGHT TO PLATFORM
9.38 9.95
8.41 8.98
7.38 7.95
ORIO-HD-05 ORIO-HD-06
8 10
2 2
10 10
20 24
2 2
1 1
4 4
2 2
4 4
258 268
1,863.00 1,885.00
2 0
4 0
POR1/2CAM
1,193.00 1,215.00
2 2
ORIO HD - Accessories Kit and Spare parts Kit
POR CAMPATAPOR HD CAMTPOR 1/2 CAM
DescriptionArticle code
POR PIANOC
PriceEuros
166.00166.00
281.00144.00
Section/complete intermediate section (1.45 m)Section/complete terminal section (gold railing)Complete intermediate half-section (0.63 m)Type C - aluminium frame with surface and toe-board in treated waterproof, non-slip, stain-proof wood
POR BASEHDSS 219.00RIGID base - EN1004 in four parts. Equipped with Ø 150 mm. nylon wheels with brake and red tyre
POR PIANOD 394.00Type D - aluminium frame with surface in fret sheet aluminium and toe-board in treated wood
ORIO HD - Optional ACCESSORIES
Price of each/€
POK ELSCL ST 70.00
Article code
Price of each/€
POR STAB V 28.00
Article code
Screw levellers/outriggers in galvanized steel for rigid base. Compensate for slopes or differences in level up to 35 cm, with maximum precision
Work platform in treated waterproof, non-slip, stain-proof Finnish birch wood! Equipped with trapdoor, regulation toe-boards and anti-lift safety device to protect against the wind or accidental lifting.
Ø 150 mm wheels Wheel on plate made in Italy to certified EN1004 standards with polyurethane core and RED tyre. Non-marking properties for use on fine flooring.
Terminal upright SillRailing
outriggers
to platforms
Sill
Upright
lock fastened Anti-lift
Adjustable HD
1.80
1.00
Intermediate railing
POR PARI 80.00KIT - 4 HD outriggers with double arm POK STAFFEHD 108.00KIT - 4 HD outriggers with double arm
Adapter kit, allowing the scaffold to be used on slopes or differences in level up to 80 cm
Consists of 2 separate components with extension adjustment locked in place with a steel pin
Can be applied to the vertical tubes on each side of the scaffold using steel clamps. They can be positioned so as to reduce the size of the scaffold on site
Base dimensions 2.00 x 1.20 mTotal maximum height 16.05 m
« Rungs installed every 30 cm allow each upright to be used like a real vertical ladder and to position the platforms and intermediate railings with the utmost ease
« Sturdy tubing in Ø 45 x 1.5 mm steel section metal
« Gold coloured galvanized protective top section
« Safe, strong pawl locks. No bolts or screws to tighten
« High-density good quality rust-inhibiting galvanizing treatment
« Frigerio brand name and year of manufacture on each scaffold
« Manual containing assembly, use and disassembly instructions
The tower scaffold able to reach maximum operating heights and comply with all requirements while always guaranteeing optimum stability.
The generously sized rigid rectangular base allows 2 outriggers (optional) to be applied while the 2.40 m
floor surface on each platform ensures ease of movement when working at heights.
Long outriggers with double clamps allow the base surface to be adjusted and enlarged.
Just add intermediate work platforms and railings and the scaffold conforms to European standard EN 1004 for non-anchored use.
EXPORT
ANCHORAGE every 3.60 meters is MANDATORY
12 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
2200 kg/m
5 yearsCAPACITYWARRANTY
EXP-05EXP-HD-02 EXP-HD-03 EXP-HD-04
m 6.45
m 2.85
m 4.05
m 5.25
EXP-06
m 7.65
REGULATIONS
D.L. 81
Ste
el S
caff
olds
On request: See P.P.E. on page 58
High-strength non-slip rungs!Rectangular-section rungs with deep non-slip scoring and optimized shape. Ensure improved frame rigidity and optimum weld tightness.
Numerical control-type calibrated rounded couplings with reinforcing edgingAbsolutely guaranteed coupling without the possibility of denting during use or transport.
EXP-07
m 8.85
EXP-08
m 10.05
100%100%100%
3,000,000Damage to property and persons
KEY : - Anchorage is mandatory
Photo of a complete EXP-07 scaffold
PRODUCTINSURANCE
Export EXPORT - Professional Scaffolds
Conforms to D.L. 81 of 09/04/2008
13Recommended retail prices - VAT excluded.
EXP-12 EXP-13EXP-09 EXP-10 EXP-11
m 12.45
m 11.25
m 16.05m 14.85
m 13.65
Ste
el S
caff
olds
EXP-HDSPALLA
PEX SPALLAT
PEX DAV
Vertical upright with 4 rungs
Terminal vertical upright
Sill
P TIR L
PEX DAVPROT
PEX BN SR
PEX RUOTA
Diagonal brace
Terminal railing frame
Complete base without wheels
Ø 200 mm nylon wheels
P STAFFA 2 Outrigger - Type 2
P STAFFA 1 Outrigger - Type 1
Article codes
m
m
m
40.00
38.00
24.00
6.50
26.00
112.00
31.00
45.00
27.00
8.2
7.0
6.3
1.1
7.2
20.6
2.5
7.2
4.6
7.40 8.60 9.80 11.00 12.20 13.40 14.60
6.45 7.65 8.85 10.05 11.25 12.45 13.65
5.40 6.60 7.80 9.00 10.20 11.40 12.60
EXP EXP EXP EXP EXP EXP EXP
8 10 12 14 16 18 20
2 2 2 2 2 2 2
8 10 12 14 16 18 20
20 24 28 32 36 40 44
2 2 2 2 2 2 2
1 1 1 1 1 1 1
4 4 4 4 4 4 4
0 0 0 0 0 0 4
4 4 4 4 4 4 0
Total weight
COMPLETE - total price
253 286 319 353 386 419 463
1,459.00 1,613.00 1,767.00 1,921.00 2,075.00 2,229.00 2,455.00
Total price without OUTRIGGERS and without PLATFORM (Art. with code SSP) 1,006.00 1,160.00 1,314.00 1,468.00 1,622.00 1,776.00 1,930.00
15.80 17.00
14.85 16.05
13.80 15.00
EXP EXP
22 24
2 2
22 24
48 52
2 2
1 1
4 4
4 4
0 0
496 529
2,609.00 2,763.00
2,084.00 2,238.00
€
€
kg
3.80 5.00 6.20
2.85 4.05 5.25
1.80 3.00 4.20
EXP-HD EXP-HD EXP-HD
2 4 6
2 2 2
2 4 6
8 12 16
2 2 2
1 1 1
4 4 4
0 0 0
0 0 0
135 168 201
889.00 1,043.00 1,197.00
544.00 698.00 852.00
PEX PIANO BW Platform + toe-board 345.00 39.0 1 1 1 1 1 1 1 1 11 1 1
USEFUL WORKING HEIGHT
OVERALL HEIGHT
HEIGHT TO PLATFORM
05 06 07 08 09 10 11 12 1302 03 04
EXPORT - Accessories Kit and Spare parts Kit
EXP-HD CAMPEXP-HD CAMTEXP-HD1/2CA
DescriptionArticle code
PEX PIANO C
PriceEuros
154.00154.00
439.00132.00
Section/complete intermediate section (1.20 m)Section/complete terminal section (gold railing)Complete intermediate half-section (0.60 m)Type C - aluminium frame with surface and toe-board in treated waterproof, non-slip, stain-proof wood
PEX BN SS 236.00RIGID base - EN1004 in four parts. Equipped with Ø 200 mm nylon wheels with brake and blue tyre
PEX PIANO D 590.00Type D - aluminium frame with surface in fret sheet aluminium and toe-board in treated wood
P SBARCO 40.00Adapter kit for roof landings
Outrigger and leveller with screw on wheel
Compensates for slopes or differences in level up to 46 cm without affecting the ease with which the scaffold can be moved
Outrigger and leveller with screw on wheel
Compensates for slopes or differences in level up to 97 cm without affecting the ease with which the scaffold can be moved
EXPORT - Optional ACCESSORIES
Price of each/€
P LIV I 165.00
Article code Price of each/€
P LIV V RF 100.00
Article code
GIANT-size base. Can be adjusted.Made of galvanized steel lattice, adjustable in width and equipped with 4 large levellers, adjustable in height and able to compensate for differences in level up to 1.5 m, plus 4 screw outriggers. Designed for use on the tiered seating of stadiums or multiplexes.
Price of each/€
P B CINEMA 1,121.00
Article code
Scaffold price supplement €
885.00
Price of each/€
PEX STAB V 31.00
Article code
Screw levellers/outriggers in galvanized steel with plate for rigid base. Compensate for slopes or differences in level up to 35 cm, with maximum precision
Platform in treated waterproof, non-slip, stain-proof Finnish birch wood!Equipped with trapdoor, regulation toe-boards and anti-lift safety device to protect against the wind or accidental lifting.
Ø 200 mm wheels EN 1004 Wheel on plate with anti-crushing polyurethane core and soft BLUE tyre. Extremely easy to manoeuvre on all types of floor surface. Features non-marking properties for use on fine flooring.
2.001.20
Upright End piece
RailingEnd piece
Sill
Upright
P STAFFE 1 108.00KIT - 4 outriggers TYPE-1 from 6 to 12 meters
P STAFFE 2 180.00KIT - 4 outriggers TYPE-2 up to 16 meters
Base dimensions 2.00 x 1.20 mTotal maximum height 12.45 m
« Rungs installed every 30 cm allow each upright to be used like a real vertical ladder and to position the platforms and intermediate railings with the utmost ease
« Sturdy tubing in Ø 45 x 1.5 mm steel section metal
« Gold coloured galvanized protective top section
« Safe, strong pawl locks. No bolts or screws to tighten
« High-density good quality rust-inhibiting galvanizing treatment
« Frigerio brand name and year of manufacture on each scaffold
« Manual containing assembly, use and disassembly instructions
Accessorized configuration of the EXPORT tower scaffold, comprising all the functional characteristics and quality of this latter.
EXPORT HD includes the minimum number of intermediate work platforms and railings required for compliance with European standard EN 1004 for non-anchored use up to a height of 13.40 m.
Thanks to these characteristics, EXPORT HD is an extremely safe and versatile scaffold. It is ideal for a vast number of applications since it can be adapted to suit all requirements.
EXPORT HD
WITHOUT ANCHORAGE for indoor and outdoor use - Conform to EN 1004
14 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
Use instructions according to EN 1004According to EN 1004, the distance between work platforms in non-anchored scaffolds must not exceed 4 m. To conform to the aforementioned European standard, the work platforms must be assembled with regulation intermediate railings. Comply with the indicated configurations with the minimum number of platforms required, as shown in this publication. Non-anchored scaffolds may only be used in compliance with the indications in the instruction manual.
REGULATIONS
D.L. 81EN 1004
m 5.25
m 4.05
m 2.85
m 6.45
EXP-HD-02 EXP-HD-03 EXP-HD-04 EXP-HD-05
Ste
el S
caff
olds
On request: See P.P.E. on page 58
2200 kg/m
5 yearsCAPACITYWARRANTY
High-strength non-slip rungs!Rectangular-section rungs with deep non-slip scoring and optimized shape. Ensure improved frame rigidity and optimum weld tightness.
Numerical control-type calibrated rounded couplings with reinforcing edgingAbsolutely guaranteed coupling without the possibility of denting during use or transport.
m 7.65
m 8.85
EXP-HD-07EXP-HD-06
100%100%100%
3,000,000Damage to property and persons
KEY : - Anchorage is mandatory for indoor use
Photo of a complete EXP-HD-06 scaffold
PRODUCTINSURANCE
Export HDEXPORT HD - Professional Scaffolds
WITHOUT ANCHORAGE for indoor use - Conform to EN 1004
15Recommended retail prices - VAT excluded.
m 10.05
m 11.25
m 12.45
EXP-HD-09 EXP-HD-10EXP-HD-08
2.00
Terminal uprightSillRailing
platforms
Sill
Upright
fastened to
Intermediate railing
Anti-lift lock
1.20
Ste
el S
caff
olds
Outrigger and leveller with screw on wheel
Compensates for slopes or differences in level up to 46 cm without affecting the ease with which the scaffold can be moved
Outrigger and leveller with screw on wheel
Compensates for slopes or differences in level up to 97 cm without affecting the ease with which the scaffold can be moved
EXPORT HD - Optional ACCESSORIES
Price of each/€
P LIV I 165.00
Article code Price of each/€
P LIV V RF 100.00
Article code
GIANT-size base. Can be fully adjusted. Made of galvanized steel lattice, adjustable in width, equipped with 4 large levellers, adjustable in height and able to compensate for differences in level up to 1.5 m, plus 4 screw outriggers. Designed for use on the tiered seating of stadiums or multiplexes.
Price of each/€
P B CINEMA
Article code
Scaffold price supplement €
EXPORT HD - Accessories Kit and Spare parts Kit
EXP-HD CAMPEXP-HD CAMTEXP-HD1/2CA
DescriptionArticle code
PEX PIANO C
PriceEuros
154.00154.00
439.00132.00
Section/complete intermediate section (1.20 m)Section/complete terminal section (gold railing)Complete intermediate half-section (0.60 m)Type C - aluminium frame with surface and toe-board in treated waterproof, non-slip, stain-proof wood
PEX BN SS 236.00RIGID base - EN1004 in four parts. Equipped with Ø 200 mm. nylon wheels with brake and soft blue tyre
PEX PIANO D 590.00Type D - aluminium frame with surface in fret sheet aluminium and toe-board in treated wood
P SBARCO 40.00Adapter kit for roof landings
EXP-HDSPALLA
PEX SPALLAT
PEX DAV
Vertical upright with 4 rungs
Terminal vertical upright
Sill
P TIR L
PEX DAVPROT
PEX BN SR
PEX RUOTA
Diagonal brace
Terminal railing frame
Complete base without wheels
Ø 200 mm nylon wheels
P STAFFA 2 Outrigger - Type 2
P STAFFA 1 Outrigger - Type 1
Article codes
m
m
m
40.00
38.00
24.00
6.50
26.00
112.00
31.00
45.00
27.00
8.2
7.0
6.3
1.1
7.2
20.6
2.5
7.2
4.6
3.80 5.00 6.20 7.40 8.60 9.80 11.00
2.85 4.05 5.25 6.45 7.65 8.85 10.05
0.60 3.00 4.20 5.40 6.60 7.80 9.00
EXP-HD EXP-HD EXP-HD EXP-HD EXP-HD EXP-HD EXP-HD
2 4 6 8 10 12 14
2 2 2 2 2 2 2
2 4 6 8 10 12 14
8 12 16 20 24 28 32
2 2 2 2 2 2 2
1 1 1 1 1 1 1
4 4 4 4 4 4 4
0 0 0 0 0 0 0
0 0 0 4 4 4 4
Total weight
Total price
135 168 201 305 338 371 456
889.00 1,043.00 1,197.00 1,888.00 2,042.00 2,196.00 2,779.00
Total price without OUTRIGGERS and without PLATFORM (Art. with code SSP) 544.00 698.00 852.00 1,006.00 1,160.00 1,314.00 1,468.00
12.20 13.40
11.25 12.45
10.20 11.40
EXP-HD EXP-HD
16 18
2 2
16 18
36 40
2 2
1 1
4 4
0 0
4 4
489 522
2,933.00 3,087.00
1,622.00 1,776.00
€
€
kg
PEX PIANO BW Platform + toe-board 345.00 39.0 1 1 1 2 2 2 3 3 3
USEFUL WORKING HEIGHT
OVERALL HEIGHT
HEIGHT TO PLATFORM
PEX-HD PARS Intermediate railing frame 42.00 6.3 0 0 0 2 2 2 4 4 4
02 03 04 05 06 07 08 09 10
Price of each/€
PEX STAB V 31.00
Article code
Screw levellers/outriggers in galvanized steel with plate for rigid base. Compensate for slopes or differences in level up to 35 cm, with maximum precision
Platform in treated waterproof, non-slip, stain-proof Finnish birch wood!Equipped with trapdoor, regulation toe-boards and anti-lift safety device to protect against the wind or accidental lifting.
Ø 200 mm wheels EN 1004 Wheel on plate with anti-crushing polyurethane core and soft BLUE tyre. Extremely easy to manoeuvre on all types of floor surface. Features non-marking properties for use on fine flooring.
EXP HD PARI 84.00KIT - 2 intermediate railing frames
P STAFFE 1 108.00KIT - 4 outriggers TYPE-1 from 6 to 12 meters
P STAFFE 2 180.00KIT - 4 outriggers TYPE-2 up to 16 meters
1,121.00
885.00
Base dimensions 2.00 x 1.20 mTotal maximum height 16.05 m
« Rungs installed every 30 cm allow each upright to be used like a real vertical ladder and to position the platforms and intermediate railings with the utmost ease
« Sturdy tubing in Ø 45 x 1.5 mm steel section metal
« Gold coloured galvanized protective top section
« Safe, strong pawl locks. No bolts or screws to tighten
« Supplied with aluminium internal ladders to allow small loads to be easily carried by hand
« All configurations feature initial ladders in two extension sections and relative base platform where the ladders is positioned
« High-density good quality rust-inhibiting galvanizing treatment
« Frigerio brand name and year of manufacture on each scaffold
« Manual containing assembly, use and disassembly instructions
Further evolution of the EXPORT family in its most complete version. EXPORT 3001 features all the characteristics offered by EXPORT HD and is thus the tower scaffold par excellence as to sturdiness, stability and safety. In addition to the previous configurations, EXPORT 3001 includes a greater number of work platforms complete with their railings and linked together by convenient aluminium service ladders.
EXPORT 3001
WITHOUT ANCHORAGE for indoor and outdoor use - Conform to EN 1004
16 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
Use instructions according to EN 1004According to EN 1004, the distance between work platforms in non-anchored scaffolds must not exceed 4 m. To conform to the aforementioned European standard, the work platforms must be assembled with regulation intermediate railings. Comply with the indicated configurations with the minimum number of platforms required, as shown in this publication. Non-anchored scaffolds may only be used in compliance with the indications in the instruction manual.
REGULATIONS
D.L. 81EN 1004
m 4.05
EXP-3001-03
m 6.45
EXP-3001-05
m 7.65
EXP-3001-06
m 8.85
EXP-3001-07
Ste
el S
caff
olds
2200 kg/m
5 years
CAPACITYWARRANTY
High-strength non-slip rungs!Rectangular-section rungs with deep non-slip scoring and optimized shape. Ensure improved frame rigidity and optimum weld tightness.
Numerical control-type calibrated rounded couplings with reinforcing edgingAbsolutely guaranteed coupling without the possibility of denting during use or transport.
On request: See P.P.E. on page 58
WITHOUT ANCHORAGE for indoor use
m 10.05
EXP-3001-08
m 12.45
EXP-3001-10
100%100%100%
3,000,000Damage to property and persons
Photo of a complete EXP-3001-08 scaffold
PRODUCTINSURANCE
Export 3001EXPORT 3001 - Professional Scaffolds
ANCHORAGE every 3.60 meters is MANDATORY
17Recommended retail prices - VAT excluded.
m 14.85
EXP-3001-12
m 16.05
EXP-3001-13
Ste
el S
caff
olds
Outrigger and leveller with screw on wheel
Compensates for slopes or differences in level up to 46 cm without affecting the ease with which the scaffold can be moved
Outrigger and leveller with screw on wheel
Compensates for slopes or differences in level up to 97 cm without affecting the ease with which the scaffold can be moved
EXPORT 3001 - Optional ACCESSORIES
Price of each/€
PEX STAB V 31.00
Article code
Screw levellers/outriggers in galvanized steel with plate for rigid base. Compensate for slopes or differences in level up to 35 cm, with maximum precision
Price of each/€
P LIV I 165.00
Article code Price of each/€
P LIV V RF 100.00
Article code
GIANT-size base. Can be fully adjusted. Made of galvanized steel lattice, adjustable in width, equipped with 4 large levellers, adjustable in height and able to compensate for differences in level up to 1.5 m, plus 4 screw outriggers. Designed for use on the tiered seating of stadiums or multiplexes.
Price of each/€
P B CINEMA 1,121.00
Article code
Scaffold price supplement €
885.00
EXPORT 3001 - Accessories Kit and Spare parts Kit
EXP-HD CAMPEXP-HD CAMTEXP-HD1/2CA
DescriptionArticle code
PEX PIANO C
PriceEuros
154.00154.00
439.00132.00
Section/complete intermediate section (1.20 m)Section/complete terminal section (gold railing)Complete intermediate half-section (0.60 m)Type C - aluminium frame with surface and toe-board in waterproof, non-slip, stain-proof treated wood
PEX BN SS 236.00RIGID base - EN1004 in 4 parts. Equipped with Ø 200 mmnylon wheels with brake and blue
PEX PIANO D 590.00Type D - aluminium frame with surface in fret sheet aluminium and toe-board in treated wood
P SBARCO 40.00Tyre Adapter kit for roof landings
Platform in treated waterproof, non-slip, stain-proof Finnish birch wood!Equipped with trapdoor, regulation toe-boards and anti-lift safety device to protect against the wind or accidental lifting.
Ø 200 mm wheels EN 1004 Wheel on plate with anti-crushing polyurethane core and soft BLUE tyre. Extremely easy to manoeuvre on all types of floor surface. Features non-marking properties for use on fine flooring.
EXP-HDSPALLA
PEX SPALLAT
PEX DAV
Vertical upright with 4 rungs
Terminal vertical upright
Sill
P TIR L
PEX DAVPROT
PEX BN SR
PEX RUOTA
Diagonal brace
Terminal railing frame
Complete base without wheels
Ø 200 mm nylon wheels
P STAFFA 2 Outrigger - Type 2
P STAFFA 1 Outrigger - Type 1
Article codes
m
m
m
40.00
38.00
26.00
6.50
24.00
112.00
31.00
45.00
27.00
8.2
7.0
6.3
1.1
7.2
20.6
2.5
7.2
4.6
5.00 7.40 8.60 9.80 11.00 13.40
4.05 6.45 7.65 8.85 10.05 12.45
3.00 5.40 6.60 7.80 9.00 11.40
EXP-3001 EXP-3001 EXP-3001 EXP-3001 EXP-3001 EXP-3001
4 8 10 12 14 18
2 2 2 2 2 2
4 8 10 12 14 18
12 20 24 28 32 40
2 2 2 2 2 2
1 1 1 1 1 1
4 4 4 4 4 4
0 0 0 0 0 0
0 4 4 4 4 4
Total weight
Total price
192 333 422 455 544 666
1,358.00 2,280.00 2,940.00 3,094.00 3,754.00 4,568.00
Total price without OUTRIGGERS and without PLATFORM (Art. with code SSP) 698.00 1,006.00 1,160.00 1,314.00 1,468.00 1,776.00
15.80 17.00
14.85 16.05
13.80 15.00
EXP-3001 EXP-3001
22 24
2 2
22 24
48 52
2 2
1 1
4 4
4 4
0 0
799 888
5,454.00 6,114.00
2,084.00 2,238.00
€
€
kg
PEX PIANO BW Platform + toe-board 345.00 39.0 1 2 3 3 4 5 6 7
USEFUL WORKING HEIGHT
OVERALL HEIGHT
HEIGHT TO PLATFORM
03 05 06 07 08 10 12 13
PEX-HD PARS Intermediate railing frame 42.00 6.3 0 2 4 4 6 8 10 12
P 3001PIANO Base platform to support ladder 144.00 15.0 1 1 1 1 1 1 1 1
P 3001SCALA 3001 simple internal ladder with hooks 77.00 4.2 0 1 2 2 3 4 5 6
P 3001/07+06 3001/7+6 internal ladder in two extension sections with hooks 171.00 8.8 1 1 1 1 1 1 1 1
fastened
2.001.20
UprightEnd piece Railing
End piece
Sill
Upright
Intermediate railing
Base platform
Ladder 3001/6+7
Simple ladder3001
to platforms
Anti-lift lock
EXP HD PARI 84.00KIT - 2 intermediate railing frames
P STAFFE 1 108.00KIT - 4 outriggers TYPE-1 from 6 to 12 meters
P STAFFE 2 180.00KIT - 4 outriggers TYPE-2 up to 16 meters
KEY : - Anchorage is mandatory - Anchorage is mandatory for indoor
Base dimensions 2.50 x 1.20 mTotal maximum height 16.05 m
« Rungs installed every 30 cm allow each upright to be used like a real vertical ladder and to position the platforms and intermediate railings with the utmost ease
« Sturdy tubing in Ø 45 x 1.5 mm steel section metal
« Gold coloured galvanized protective top section
« Safe, strong pawl locks. No bolts or screws to tighten
« High-density good quality rust-inhibiting galvanizing treatment
« Frigerio brand name and year of manufacture on each scaffold
« Manual containing assembly, use and disassembly instructions
The ideal choice when an extra-long tower scaffold is required. Operators can move comfortable along its 3
2m m2 work platforms while working at heights without having to continuously stop and move the scaffold to another site. Able to reach maximum operating heights, this model is able to comply with all requirements while always guaranteeing optimum stability. It features a large rigid rectangular base, which can be fitted with screw outriggers (optional).Long outriggers with double clamps allow the base surface to be adjusted and enlarged. Just add intermediate work platforms and railings and the scaffold conforms to European standard EN 1004 for non-anchored use.
SUPERLUNGO
ANCHORAGE every 3.60 meters is MANDATORY
18 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
REGULATIONS
D.L. 81
Ste
el S
caff
olds
On request: See P.P.E. on page 58
2200 kg/m
5 years
CAPACITYWARRANTY
High-strength non-slip rungs!Rectangular-section rungs with deep non-slip scoring and optimized shape. Ensure improved frame rigidity and optimum weld tightness.
Numerical control-type calibrated rounded couplings with reinforcing edgingAbsolutely guaranteed coupling without the possibility of denting during use or transport. m 5.25
m 2.85
m 4.05
m 6.45
m 7.65
SUP-HD-02 SUPER-06SUP-HD-03 SUP-HD-04 SUPER-05
m 10.05
m 11.25
m 8.85
SUPER-09SUPER-08SUPER-07
100%100%100%
3,000,000Damage to property and persons
KEY : - Anchorage is mandatory
Photo of a complete SUP-HD-02 scaffold
PRODUCTINSURANCE
SUPERLUNGO - Professional Scaffolds
Conforms to D.L. 81 of 09/04/2008
19Recommended retail prices - VAT excluded.
Ste
el S
caff
olds
m 12.45
m 14.85
m 13.65
SUPER-10 SUPER-11 SUPER-12 SUPER-13
m 16.05
Outrigger and leveller with screw on wheel
Compensates for slopes or differences in level up to 46 cm without affecting the ease with which the scaffold can be moved
Outrigger and leveller with screw on wheel
Compensates for slopes or differences in level up to 97 cm without affecting the ease with which the scaffold can be moved
SUPERLUNGO - Optional ACCESSORIES
Price of each/€
PEX STAB V 31.00
Article code
Screw levellers/outriggers in galvanized steel with plate for rigid base. Compensate for slopes or differences in level up to 35 cm, with maximum precision
Price of each/€
P LIV I 165.00
Article code Price of each/€
P LIV V RF 100.00
Article code
SUPERLUNGO - Accessories Kit and Spare parts Kit
PSP CAMPATAPSP HD CAMTPSP 1/2 CAM
DescriptionArticle code
PSP PIANO C
PriceEuros
174.00174.00
505.00142.00
Section/complete intermediate section (1.20 m)Section/complete terminal section (gold railing)Complete intermediate half-section (0.60 m)Type C - aluminium frame with surface and toe-board in treated waterproof, non-slip, stain-proof wood
PSP BN SS 277.00RIGID base - EN1004 in four parts. Equipped with Ø 200 mm. nylon wheels with brake and soft blue tyre
PSP PIANO D 635.00Type D - aluminium frame with surface in fret sheet aluminium and toe-board in treated wood
P SBARCO 40.00Adapter kit for roof landings
EXP-HDSPALLA
PEX SPALLAT
PSP DAVANZ
Vertical upright with 4 rungs
Terminal vertical upright
Sill
P TIR L
PSP DAVPROT
PSP BN SR
PSP RUOTA
Diagonal brace
Terminal railing frame
Complete base without wheels
Ø 200 mm nylon wheels
P STAFFA 2 Outrigger - Type 2
P STAFFA 1 Outrigger - Type 1
Article codes
m
m
m
40.00
38.00
29.00
6.50
36.00
153.00
31.00
45.00
27.00
8.2
7.0
3.8
1.1
8.4
23.4
2.5
7.2
4.6
7.40 8.60 9.80 11.00 12.20 13.40 14.60
6.45 7.65 8.85 10.05 11.25 12.45 13.65
5.40 6.60 7.80 9.00 10.20 11.40 12.60
SUPER SUPER SUPER SUPER SUPER SUPER SUPER
8 10 12 14 16 18 20
2 2 2 2 2 2 2
8 10 12 14 16 18 20
20 24 28 32 36 40 44
2 2 2 2 2 2 2
1 1 1 1 1 1 1
4 4 4 4 4 4 4
0 0 0 0 0 0 4
4 4 4 4 4 4 0
Total weight
COMPLETE - Total price
256 286 315 344 373 403 441
1,638.00 1,812.00 1,986.00 2,160.00 2,334.00 2,508.00 2,754.00
Total price without OUTRIGGERS and without PLATFORM (Art. with code SSP) 1,147.00 1,321.00 1,495.00 1,669.00 1,843.00 2,017.00 2,191.00
15.80 17.00
14.85 16.05
13.80 15.00
SUPER SUPER
22 24
2 2
22 24
48 52
2 2
1 1
4 4
4 4
0 0
470 500
2,928.00 3,102.00
2,365.00 2,539.00
€
€
kg
3.80 5.00 6.20
2.85 4.05 5.25
1.80 3.00 4.20
SUP-HD SUP-HD SUP-HD
2 4 6
2 2 2
2 4 6
8 12 16
2 2 2
1 1 1
4 4 4
0 0 0
0 0 0
148 178 207
1,008.00 1,182.00 1,356.00
625.00 799.00 973.00
PSP PIANO BW Platform + toe-board 383.00 47.0 1 1 1 1 1 1 1 1 11 1 1
USEFUL WORKING HEIGHT
OVERALL HEIGHT
HEIGHT TO PLATFORM
05 06 07 08 09 10 11 12 1302 03 04
P TIR V Vertical brace 5.00 0.5 8 10 12 14 16 18 20 22 242 4 6
2.50
1.20
Vertical brace
Toe-boardsToe-boardsToe-boards
Upright End piece Sill
Railing
Sill
Upright
to platformslock fastened Anti-lift
P STAFFE 1 108.00KIT - 4 outriggers TYPE-1 from 6 to 12 meters
P STAFFE 2 180.00KIT - 4 outriggers TYPE-2 up to 16 meters
Ø 200 mm wheels. Certified EN 1004
Wheel on plate with anti-crushing polyurethane core and soft BLUE tyre. Extremely easy to manoeuvre on all types of floor surface. Features non-marking properties for use on fine flooring.
Platform in treated waterproof, non-slip, stain-proof Finnish birch wood!
Equipped with trapdoor, regulation toe-boards and anti-lift safety device to protect against the wind or accidental lifting.
Base dimensions 2.50 x 1.20 mTotal maximum height 12.45 m
« Rungs installed every 30 cm allow each upright to be used like a real vertical ladder and to position the platforms and intermediate railings with the utmost ease
« Sturdy tubing in Ø 45 x 1.5 mm steel section metal
« Gold coloured galvanized protective top section
« Safe, strong pawl locks. No bolts or screws to tighten
« High-density good quality rust-inhibiting galvanizing treatment
« Frigerio brand name and year of manufacture on each scaffold
« Manual containing assembly, use and disassembly instructions
Accessorized configuration of the SUPERLUNGO tower scaffold, comprising all the functional characteristics and quality of this latter.
SUPERLUNGO HD includes the minimum number of intermediate work platforms and railings required for compliance with European standard EN 1004 for non-anchored use up to a height of 13.40 m.
Thanks to these characteristics, SUPERLUNGO HD is an extremely safe and versatile scaffold, ideal for all situations and especially convenient when work at
2heights requires the extra length provided by its 3 m platforms.
SUPERLUNGO HD
20 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
Ste
el S
caff
olds
On request: See P.P.E. on page 58
2200 kg/m
5 years
CAPACITYWARRANTY
High-strength non-slip rungs!Rectangular-section rungs with deep non-slip scoring and optimized shape. Ensure improved frame rigidity and optimum weld tightness.
Numerical control-type calibrated rounded couplings with reinforcing edgingAbsolutely guaranteed coupling without the possibility of denting during use or transport. m 5.25
m 2.85
m 4.05
m 6.45
m 7.65
SUP-HD-02 SUP-HD-06SUP-HD-03 SUP-HD-04 SUP-HD-05
m 8.85
SUP-HD-07
WITHOUT ANCHORAGE for indoor and outdoor use - Conform to EN 1004
Use instructions according to EN 1004According to EN 1004, the distance between work platforms in non-anchored scaffolds must not exceed 4 m. To conform to the aforementioned European standard, the work platforms must be assembled with regulation intermediate railings. Comply with the indicated configurations with the minimum number of platforms required, as shown in this publication. Non-anchored scaffolds may only be used in compliance with the indications in the instruction manual.
REGULATIONS
D.L. 81EN 1004
100%100%100%
3,000,000Damage to property and persons
KEY : - Anchorage is mandatory for indoor use
Photo of a complete SUP-HD-05 scaffold
PRODUCTINSURANCE
SUPERLUNGO HD - Professional Scaffolds
21Recommended retail prices - VAT excluded.
Ste
el S
caff
olds
Outrigger and leveller with screw on wheel
Compensates for slopes or differences in level up to 46 cm without affecting the ease with which the scaffold can be moved
Outrigger and leveller with screw on wheel
Compensates for slopes or differences in level up to 97 cm without affecting the ease with which the scaffold can be moved
SUPERLUNGO HD - Optional ACCESSORIES
Price of each/€
PEX STAB V 31.00
Article code
Screw levellers/outriggers in galvanized steel with plate for rigid base. Compensate for slopes or differences in level up to 35 cm, with maximum precision
Price of each/€
P LIV I 165.00
Article code Price of each/€
P LIV V RF 100.00
Article code
SUPERLUNGO HD - Accessories Kit and Spare parts Kit
PSP CAMPATAPSP HD CAMTPSP 1/2 CAM
DescriptionArticle code
PSP PIANO C
PriceEuros
174.00174.00
505.00142.00
Section/complete intermediate section (1.20 m)Section/complete terminal section (gold railing)Complete intermediate half-section (0.60 m)Type C - aluminium frame with surface and toe-board in treated waterproof, non-slip, stain-proof wood
PSP BN SS 277.00RIGID base - EN1004 in four parts. Equipped with Ø 200 mm. nylon wheels with brake and soft blue tyre
PSP PIANO D 635.00Type D - aluminium frame with surface in fret sheet aluminium and toe-board in treated wood
P SBARCO 40.00Adapter kit for roof landings
m 10.05
m 11.25
m 12.45
SUP-HD-10SUP-HD-09SUP-HD-08
WITHOUT ANCHORAGE for indoor use - Conform to EN 1004
EXP-HDSPALLA
PEX SPALLAT
PSP DAVANZ
Vertical upright with 4 rungs
Terminal vertical upright
Sill
P TIR L
P TIR V
PSP BN SR
PSP RUOTA
Diagonal brace
Terminal railing frame
Complete base without wheels
Ø 200 mm nylon wheels
P STAFFA 2 Outrigger - Type 2
P STAFFA 1 Outrigger - Type 1
Article codes
m
m
m
40.00
38.00
29.00
6.50
36.00
153.00
31.00
45.00
27.00
8.2
7.0
3.8
1.1
8.4
23.4
2.5
7.2
4.6
7.40 8.60 9.80 11.00 12.20 13.40
6.45 7.65 8.85 10.05 11.25 12.45
5.40 6.60 7.80 9.00 10.20 11.40
SUP-HD SUP-HD SUP-HD SUP-HD SUP-HD SUP-HD
8 10 12 14 16 18
2 2 2 2 2 2
8 10 12 14 16 18
20 24 28 32 36 40
8 10 12 14 16 18
1 1 1 1 1 1
4 4 4 4 4 4
0 0 0 0 0 0
4 4 4 4 4 4
Total weight
COMPLETE - Total price
322 351 380 475 505 534
2,117.00 2,291.00 2,465.00 3,118.00 3,292.00 3,466.00
Total price without OUTRIGGERS and without PLATFORM (Art. with code SSP) 1,147.00 1,321.00 1,495.00 1,669.00 1,843.00 2,017.00
€
€
kg
3.80 5.00 6.20
2.85 4.05 5.25
1.80 3.00 4.20
SUP-HD SUP-HD SUP-HD
2 4 6
2 2 2
2 4 6
8 12 16
2 4 6
1 1 1
4 4 4
0 0 0
0 0 0
148 178 207
1,008.00 1,182.00 1,356.00
625.00 799.00 973.00
PSP PIANO BW Platform + toe-board 383.00 47.0 2 2 2 3 3 31 1 1
USEFUL WORKING HEIGHT
OVERALL HEIGHT
HEIGHT TO PLATFORM
05 06 07 08 09 1002 03 04
PSP PARS Intermediate railing frame 48.00 8.3 2 2 2 4 4 40 0 0
PSP DAVPROT 2 2 2 2 2 2
2 2 2
Vertical brace 5.00 0.5
1.20
2.50
Toe-boardsToe-boardsToe-boards
Terminal upright
Railing sill
Intermediate railing
Sill
Upright
Vertical brace
to platformsfastened Anti-lift lock
PSP PARI 96.00KIT - 2 intermediate railing frames
P STAFFE 1 108.00KIT - 4 outriggers TYPE-1 from 6 to 12 meters
P STAFFE 2 180.00KIT - 4 outriggers TYPE-2 up to 16 meters
Platform in treated waterproof, non-slip, stain-proof Finnish birch wood!
Equipped with trapdoor, regulation toe-boards and anti-lift safety device to protect against the wind or accidental lifting.
Ø 200 mm wheels. Certified EN 1004
Wheel on plate with anti-crushing polyurethane core and soft BLUE tyre. Extremely easy to manoeuvre on all types of floor surface. Features non-marking properties for use on fine flooring.
m 4.05
m 8.85
SUP-3001-06 SUP-3001-07SUP-3001-05SUP-3001-03
m 6.45
m 7.65
m 10.05
SUP-3001-08
m 12.45
SUP-3001-10
WITHOUT ANCHORAGE for indoor useWITHOUT ANCHORAGE for indoor and outdoor use - Conform to EN 1004
Base dimensions 2.50 x 1.20 mTotal maximum height 16.05 m
« Rungs installed every 30 cm allow each upright to be used like a real vertical ladder and to position the platforms and intermediate railings with the utmost ease
« Sturdy tubing in Ø 45 x 1.5 mm steel section metal
« Gold coloured galvanized protective top section
« Safe, strong pawl locks. No bolts or screws to tighten
« Supplied with aluminium internal ladders to allow small loads to be easily carried by hand
« All configurations feature initial ladders in two extension sections and relative base platform where the ladders is positioned
« High-density good quality rust-inhibiting galvanizing treatment
« Frigerio brand name and year of manufacture on each scaffold
« Manual containing assembly, use and disassembly instructions
Further evolution of the SUPERLUNGO family in its most complete version. SUPERLUNGO 3001 includes all the characteristics of SUPERLUNGO HD, guaranteeing extremely effective use where extra length is required, with platforms
2measuring a generously-sized 3 m . In addition to the previous configurations, SUPERLUNGO 3001 includes a greater number of work platforms complete with their railings and linked together by convenient aluminium service ladders.
SUPERLUNGO 3001
22 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
Ste
el S
caff
olds
Use instructions according to EN 1004According to EN 1004, the distance between work platforms in non-anchored scaffolds must not exceed 4 m. To conform to the aforementioned European standard, the work platforms must be assembled with regulation intermediate railings. Comply with the indicated configurations with the minimum number of platforms required, as shown in this publication. Non-anchored scaffolds may only be used in compliance with the indications in the instruction manual.
REGULATIONS
D.L. 81EN 1004
2200 kg/m
5 years
CAPACITYWARRANTY
High-strength non-slip rungs!Rectangular-section rungs with deep non-slip scoring and optimized shape. Ensure improved frame rigidity and optimum weld tightness.
Numerical control-type calibrated rounded couplings with reinforcing edgingAbsolutely guaranteed coupling without the possibility of denting during use or transport.
On request: See P.P.E. on page 58
100%100%100%
3,000,000Damage to property and persons
Photo of a complete SUP-3001-05 scaffold
PRODUCTINSURANCE
Superlungo 3001SUPERLUNGO 3001 - Professional Scaffolds
23Recommended retail prices - VAT excluded.
Ste
el S
caff
olds
m 16.05
SUP-3001-13SUP-3001-12
m 14.85
ANCHORAGE every 3.60 meters is MANDATORY
Outrigger and leveller with screw on wheel
Compensates for slopes or differences in level up to 46 cm without affecting the ease with which the scaffold can be moved.
Outrigger and leveller with screw on wheel
Compensates for slopes or differences in level up to 97 cm without affecting the ease with which the scaffold can be moved.
SUPERLUNGO 3001 - Optional ACCESSORIES
Price of each/€
PEX STAB V 31.00
Article code
Screw levellers/outriggers in galvanized steel with plate for rigid base. Compensate for slopes or differences in level up to 35 cm, with maximum precision
Price of each/€
P LIV I 165.00
Article code Price of each/€
P LIV V RF 100.00
Article code
SUPERLUNGO 3001 - Accessories Kit and Spare parts Kit
PSP CAMPATAPSP HD CAMTPSP 1/2 CAM
DescriptionArticle code
PSP PIANO C
PriceEuros
174.00174.00
505.00142.00
Section/complete intermediate section (1.20 m)Section/complete terminal section (gold railing)Complete intermediate half-section (0.60 m)Type C - aluminium frame with surface and toe-board in treated waterproof, non-slip, stain-proof wood
PSP BN SS 277.00RIGID base - EN1004 in four parts. Equipped with Ø 200 mm nylon wheels with brake and soft blue tyre
PSP PIANO D 635.00Type D - aluminium frame with surface in fret sheet aluminium and toe-board in treated wood
P SBARCO 40.00Adapter kit for roof landings
Platform in treated waterproof, non-slip, stain-proof Finnish birch wood!
Equipped with trapdoor, regulation toe-boards and anti-lift safety device to protect against the wind or accidental lifting the wind or accidental lifting.
EXP-HDSPALLA
PEX SPALLAT
PSP DAVANZ
Vertical upright with 4 rungs
Terminal vertical upright
Sill
P TIR L
P TIR V
PSP BN SR
PSP RUOTA
Diagonal brace
Vertical brace
Complete base without wheels
Ø 200 mm nylon wheels
P STAFFA 2 Outrigger - Type 2
P STAFFA 1 Outrigger - Type 1
Article codes
m
m
m
40.00
38.00
29.00
6.50
5.00
153.00
31.00
45.00
27.00
8.2
7.0
3.8
1.1
0.5
23.4
2.5
7.2
4.6
5.00 7.40 8.60 9.80 11.00 13.40
4.05 6.45 7.65 8.85 10.05 12.45
3.00 5.40 6.60 7.80 9.00 11.40
SUP-3001 SUP-3001 SUP-3001 SUP-3001 SUP-3001 SUP-3001
4 8 10 12 14 18
2 2 2 2 2 2
4 8 10 12 14 18
12 20 24 28 32 40
4 8 10 12 14 18
1 1 1 1 1 1
4 4 4 4 4 4
0 0 0 0 0 0
0 4 4 4 4 4
Total weight
COMPLETE - Total price
205 354 453 482 582 710
1,501.00 2,513.00 3,243.00 3,417.00 4,147.00 5,051.00
Total price without OUTRIGGERS and without PLATFORM (Art. with code SSP) 799.00 1,147.00 1,321.00 1,495.00 1,669.00 2,017.00
15.80 17.00
14.85 16.05
13.80 15.00
SUP-3001 SUP-3001
22 24
2 2
22 24
48 52
22 24
1 1
4 4
4 4
0 0
848 947
6,027.00 6,757.00
2,365.00 2,539.00
€
€
kg
PSP PIANO BW Platform + toe-board 383.00 47.0 1 2 3 3 4 5 6 7
USEFUL WORKING HEIGHT
OVERALL HEIGHT
HEIGHT TO PLATFORM
03 05 06 07 08 10 12 13
PSP PARS Intermediate railing frame 48.00 8.3 0 2 4 4 6 8 10 12
P 3001PIAPSP Base platform to support ladder 148.00 19.0 1 1 1 1 1 1 1 1
P 3001SCALA 3001 simple internal ladder with hooks 77.00 4.2 0 1 2 2 3 4 5 6
P 3001/07+06 3001/7+6 internal ladder in two extension sections with hooks 171.00 8.8 1 1 1 1 1 1 1 1
PSP DAVPROT Terminal railing frame 36.00 8.4 2 2 2 2 2 2 2 2
1.20
2.50
Toe-boardsToe-boardsToe-boards
Terminal upright
Railing sill
Intermediate railing
Sill
Upright
Vertical brace
Base platform
Ladder 3001/6+7
to platformsfastened Anti-lift lock
PSP PARI 96.00KIT - 2 intermediate railing frames
P STAFFE 1 108.00KIT - 4 outriggers TYPE-1 from 6 to 1 2 meters
P STAFFE 2 180.00KIT - 4 outriggers TYPE-2 up to 16 meters
Ø 200 mm wheels. Certified EN 1004
Wheel on plate with anti-crushing polyurethane core and soft BLUE tyre. Extremely easy to manoeuvre on all types of floor surface. Features non-marking properties for use on fine flooring.
KEY : - Anchorage is mandatory - Anchorage is mandatory for indoor use
GENERIC ACCESSORIES for steel scaffolds
24 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
Ste
el S
caff
olds
Certified max 50 kg self-braking pulley for tower scaffoldsSelf-braking pulley in galvanized steel. Certified for use with tower scaffolds. With safety lock for loaded rope when not held by the operator.Weight: 2.5 kg - Capacity: 50 kg - Rope: Ø from 18 to 22 mm - Nylon pulley with 2 ball bearings - anchoring clamp for Ø from 40 to 51 mm.
Made of galvanized steel, with quick coupling and automatic locking device allowing the support to be fixed to any tube between 38 and 52 mm in diameter and at any height on the scaffold. The swivel arm allows the load to reach the work platform with ease and without the operator being forced to lean out over the structure.
Quick coupling automatic locking swivel arm
Functions the moment in which
the operator releases the rope !
Pulley with SELF-BRAKING
safety device !
ALP CARRUALP BANGI
Description
Self-braking pulley in galvanized steel. Certified for use with tower scaffolds. With automatic safety lock. Swivel arm with quick coupling and automatic lock
PriceEuros
144.00105.00
Article code
COLL PONTXRIP PONTX
Description
Specific Si-Prev test for the required scaffold with relative certification and testing booklet Re-galvanizing of scaffold, excluding transport and work platforms
PriceEuros
189.00On request
Article code
Adjustable distance anchoring device
Allows the scaffold to be securely connected to the wall anchor point.
Consists of a galvanized steel tube with Ø 8 mm positionable pawl. Suitable for eye plugs. It is fastened to the scaffold by a double gripper clamp in galvanized steel.
The device acts as a spacer, allowing the fastening height and distance between wall and scaffold to be adjusted.
The resulting rigid connection maintains the scaffold at a fixed distance from the wall, thus protecting the wall itself from damage due to unexpected oscillations.
P ANCORF
Description
Anchoring device
PriceEuros/each
37.00
Article code
Spirit level
Applied to the base of the scaffold, it is useful for checking that the scaffold is properly levelled and vertical
BOLLA
Description
Spirit level
PriceEuros
20.00
Article code
top related