1 working with the workshop andy edgar. if you can buy it from a catalogue, buy it, don’t build...

1

Working with the Workshop 

Andy Edgar

If you can buy it from a catalogue, buy it, don’t build it.

2

US $400

Strategies

• Don’t be lazy – design it yourself –that way you get what you want, or at least asked for.

3

• But get the WS to check a sketch first for manufacturability.

• Get as much right as possible first time, but allow for mods.

4

Find 10 things wrong with this job request

1. No date

2. No charge code

3. Who is Dave? Contact details (room, phone #)

4. No idea of urgency

5. Material not specified

6. Thickness not specified

7. Quantity not specified

8. Depth of 5 x 5mm recess not specified

9. They can’t easily make a 4.37mm hole

10. They can’t make a square recess with a milling machine

5

The lathe - turning

6

What can be done on a lathe

7

Routine Tolerance

0.1mm

Making Holes/Threads

8

Drills – only fixed sizes –typ. 0.5 mm incrementsTolerance - ~ 0.1mm

The Vertical Mill

9

For making flat surfaces

Tolerance ~ 0.1mm

CNC – Numerically controlled

Sheet metal working

10

For a 6mm screw, the 6 mm means

1. The distance between consecutive turns

2. The diameter of the head

3. The maximum diameter of the threaded part

4. The minimum diameter of the threaded part

11

Screws and Bolts

• Which of the following heads are described as,– Phillips– Knurled– Countersunk– Allen/Cap– Hex– Cheese– Posidrive

12

Materials• Common W/S materials are

– Aluminium– Brass– Copper– Stainless steel (magnetic?)

– Machineable plastic (acetyl)– (Polyethylene). Soft– Nylon ( bearings, gears)– PTFE (Teflon)– Perspex, Lucite, Plexiglas (PMMA). Hard, clear.

13

“Exotic” Materials

• Beryllium copper, phosphor bronze (springs)

• Monel 500 (Cu-Ni, low therm cond. , non–magnetic)

• Macor (machineable ceramic)• Viton (elastomer, high temp O-rings)• Kapton (polyimide, vacuum, insulation)

14

Optical Windows – Glass & Acrylic

15

Optical Windows - Silica

16

Broad Spectral Range Windows

17

UV windows

18

IR Optical Window Materials

19

Which Material?• Which of these W/S metals are not “pure ( >99%)

metals?– Brass, copper, aluminium

• Which of the W/S materials would you use for,

1.A cryostat for liquid nitrogen/helium?

2.A sample holder for cryogenics

3.A good electrical insulator for T<200˚C

4.An electrode holder for high temperatures?

• Which metal would you not use for vacuum?• Which metal is the most expensive?

20

Joining Materials

21

Soldering and Brazing• Soldering (200-300˚C)

– Brass, copper• Sn-Pb (banned) • Tin-Antimony

– Have to remove surface oxide first with flux

• Brazing (600-800˚C)– Brass, copper, steel, SS

• Brass brazing rod, or• Ag-Cu-Sn “silver solder”• Hydrogen acts to clean surfaces 22

Welding

• Mainly steel, any other metal incl. Al

• Filler of same metal used to reinforce joint

• Localised electric arc melting of metal and filler.

• TIG – tungsten/inert gas (argon)

23

Glues• Aim for thin joints, clean surfaces first• Standard 2-part resin (araldite). Soften in

acetone, flame.• Silicone RTV• Thermosetting polymers and resins ( hot

glue)

24

• Superglue (cyanoacrylate)• Soluble ceramics for furnaces• Low vapour pressure resin (Varian)• Silver-filled epoxy, silver conductive

paint

Two Examples of Clever Design

25

“Kinematic” Bearings

26

Translation Platform

27

Drawings

• Hand drawings are fine• Ruler is good for straight lines!• Use grid/graph paper• To scale is best• Sketch, front, top, side views for clarity

(conventions)• Specify ID, OD, threads, material • If frequent user, consider CAD ( eg

SolidWorks) 28

Acknowledgements

• Many diagrams and info from,

“Building Scientific Apparatus”

JH Moore, CC Davis, MA Coplan, SC Greer

(new copy ( 4th edition) ordered for library)

29

30

Table of Contents

1. Mechanical design and fabrication2. Working with glass3. Vacuum technology4. Optical systems5. Charged-particle optics6. Electronics7. Detectors8. Measurement and control of temperatureIndex.

3d Printing - Justin

31

3D Printing

• For personalised, custom-made lab equipment. • Requires a 3D design- solidworks• 3D printer- School of Architecture and Design.

Solidworks

• The final design is sent as a .stl file to the printer.

• The design is printed by slicing the design into 2D digital cross sections and depositing the materials layer-by-layer.

• Materials used include thermoplastics eg. acrylonitrile butadiene styrene, polycarbonate, polylactic acid.

• A 3D Computer Aided Design (CAD) software used to create a model.

• The design starts with a 2D sketch and is extruded to give a 3D object.

IR Optical Window Materials

34

IR Optical Window Materials

35