11.mass change to qm view-mm

Making Mass Changes to the Inspection SetupThis transaction is to be used by the Master Data Maintenance person to change / update Inspection Types for the materials. This is a transaction to change / update the inspection type for large volumes of data though it may be used to change for individual materials also.

Prerequisites You must have edited the QM-specific data in the Quality Management view of the

material master. You can activate an inspection type under the following conditions:

- If it is not stock-relevant.- If it is stock-relevant and at least one active stock-relevant inspection type exists.- If it is the first stock-relevant inspection type and no inspection stock exists, or if you

set the indicator Activate despite insp. Stock. When you deactivate the last inspection type relevant to stock, there must be no

inspection stock for the material. To do this you must post the inspection lot quantities out of the inspection stock.

Procedure1. Access transaction by:

SAP Menu SAP Menu Logistics Quality Management Quality Planning Logistics Master Data Material Inspection Setup.

Transaction Code QA08

2. Choose Inspection setup, Mass processing.

Double click on the Transaction Code QA08 and following screen will appear.

Double click on this transaction code

3. Select the materials you want to process. You can make the selection by using the plant, material, the material type and the material class.

Field Name Description R/O/C

PlantA place where materials are produced, or goods and services are provided.

R

MaterialMaterial is anything that can be traded, used in manufacture, consumed, or produced.

R

Material Type A grouping together of materials with the same basic attributes. Example: raw materials, semi-finished products, or finished products.

O

Enter Plant code Click here for multiple selection options of material

Enter Material(s)

Past material code from PC to SAP

Enter

4. Enter the required inspection type.

Execute

5. Edit the following indicators:Field Name Description R/O/CActivate despite insp. stock(only in the activation function)

If you set this indicator, inspection lots are created automatically, when you activate the first stock-relevant inspection type, to avoid stock inconsistencies between QM and MM. The inspection type is taken from Customizing.If you do not set this indicator, the inspection type for a material is only activated, if no stock inconsistencies will occur between QM and MM without the creation of additional inspection lots.

R

Do not display material list

If you set this indicator, the system immediately activates the inspection type for all selected materials, when the program is run.If you do not set this indicator, the system displays a list of materials. From this list, you can select the materials, for which you want to activate the inspection type.

O

Create change documents

If you set this indicator, change documents are created for all changes that are made to the materials. You can display these change documents in the material master record.If you want to distribute inspection setup data via ALE, using change documents, you must set this indicator.This ensures that all changes to the inspection setup are distributed in other systems.

O

6. Choose Execute.The screen for editing the inspection setup parameters in the material master is displayed.

Choose Inspection type

7. Edit the indicators and field entries and choose Continue.If you set the Do not display material list indicator, the data for the chosen inspection

type is changed immediately for all selected materials.

Execute

Field Name Description R/O/C

Preferred Ins Type

If you want the system to use an inspection type other than the one that is specified in Customizing under variant 01, you must set the Preferred InsTyp indicator.

O

ActiveTo activate the inspection types listed in the table. R

8. If you did not set the Do not display material list indicator, select the materials from the list, for which you want to change the inspection type and choose Continue.

Activate Inspection type

Enter

9. Save your data.

Select all material

Save

10. Display inspection setupYou switch to the inspection setup in the Quality Management view of the material master.

Click on inspection setup

11. Display stock overview.Stock You switch to the stock overview for the chosen material.

Enter

12. And back to initial screen.

Back

Mass Changes to QM Control Key of QM View of Material Procedure

Back

1. Access transaction by:

SAP Menu SAP Menu Logistics Central Functions Mass Maintenance Mass Maintenance Dialog processing.

Transaction Code MASS

2. Choose Dialog processing, Mass maintenance.

Double click on the Transaction Code MASS and following screen will appear.

3. Select Object type and Execute.

4. Select General Material data and Execute.

Execute

Select Object type

5. Select the materials you want to process.

Execute

Select General Material Data

Click here for multiple selection options of material

Enter Material(s)

Past material code from PC to SAP

Press the execute icon or press F8.

6. Choose Execute.The screen for Mass Maintenance in the material master is displayed.

Execute

7. Select the materials from the list, for which you want to change the QM Control Key.

Execute

8. Select the field and Choose Continue

Select material

Select field

9. Edit the indicators and field entries and choose Mass Change.

Enter

2. Click on Mass Change

1. Select on New Value

10. Save your data

11. Select Plant data for Material and Execute.

Save

12. Select the materials you want to process.

Execute

Select Plant Data for Material

Click here for multiple selection options of material

Enter Material(s)

Past material code from PC to SAP

Press the execute icon or press F8.

13. Chose Execute.

Execute

Execute

13. Select the field and Choose Continue

Select field

14. Select the QM Control indicators and choose Mass Change

Enter

2. Click on Mass Change

1. Select New Value

15. Save your data

Save